Service Manual
ORDER NO. VM1102015CE
B27
High Definition Video Camera
Model No. HDC-HS80P
HDC-HS80PC
HDC-HS80PU
HDC-HS80EB
HDC-HS80EC
HDC-HS80EE
HDC-HS80EG
HDC-HS80EP
HDC-HS80GA
HDC-HS80GC
HDC-HS80GN
HDC-HS80GT
HDC-HS80GK
Vol. 1
Colour
(K)...........Black Type
© Panasonic Corporation 2011 Unauthorized copying and distribution is a violation of law.
TABLE OF CONTENTS
PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.)--------3
2 Warning --------------------------------------------------------------4
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------4
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------4
2.3. Caution for AC Cord (For EB/GC) ---------------------5
2.4. How to Replace the Lithium Battery -------------------6
3 Service Navigation------------------------------------------------7
3.1. Introduction --------------------------------------------------7
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------7
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------7
3.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------8
3.5. Precautions for Handling HDD--------------------------9
3.6. Formatting-------------------------------------------------- 13
4 Specifications ---------------------------------------------------- 14
5 Location of Controls and Components------------------ 16
6 Service Mode ----------------------------------------------------- 20
6.1. Drive Information Display ------------------------------ 21
6.2. HDD Self Check Execution ---------------------------- 21
6.3. Lock Search History Indication ----------------------- 22
6.4. Power ON Self Check Result Display--------------- 22
6.5. HDD Hardware Test ------------------------------------- 23
6.6. Erasing the lock histories ------------------------------ 23
6.7. Erasing the internal media management
information ------------------------------------------------ 24
6.8. Camera data indications while the video
playback ---------------------------------------------------- 25
7 Service Fixture & Tools --------------------------------------- 26
7.1. When Replacing the Main P.C.B. -------------------- 26
7.2. Service Position ------------------------------------------ 26
8 Disassembly and Assembly Instructions --------------- 28
8.1. Disassembly Flow Chart for the Unit ---------------- 28
8.2. PCB Location---------------------------------------------- 28
8.3. Disassembly Procedure for the Unit ---------------- 29
9 Measurements and Adjustments -------------------------- 35
9.1. Electric Adjustment -------------------------------------- 35
10 Factory Setting--------------------------------------------------- 37
10.1. How To Turn On The Factory Settings? ------------ 37
10.2. What Is The Factory Settings? ----------------------- 38
PAGE
2
1 Safety Precautions
1.1.
General Guidelines
1.3.
1. IMPORTANT SAFETY NOTICE
There are special components used in this equipment
which are important for safety. These parts are marked by
2.
3.
4.
5.
1. Plug the AC cord directly into the AC outlet. Do not use
an isolation transformer for this check.
2. Connect a 1.5 kΩ, 10 W resistor, in parallel with a 0.15 μF
capacitor, between each exposed metallic part on the set
and a good earth ground, as shown in Figure 1.
3. Use an AC voltmeter, with 1 kΩ/V or more sensitivity, to
measure the potential across the resistor.
4. Check each exposed metallic part, and measure the voltage at each point.
5. Reverse the AC plug in the AC outlet and repeat each of
the above measurements.
6. The potential at any point should not exceed 0.75 V RMS.
A leakage current tester (Simpson Model 229 or equivalent) may be used to make the hot checks, leakage current must not exceed 1/2 mA. In case a measurement is
outside of the limits specified, there is a possibility of a
shock hazard, and the equipment should be repaired and
rechecked before it is returned to the customer.
in the Schematic Diagrams, Circuit Board Layout,
Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent X-RADIATION,
shock, fire, or other hazards. Do not modify the original
design without permission of manufacturer.
An Isolation Transformer should always be used during
the servicing of AC Adaptor whose chassis is not isolated
from the AC power line. Use a transformer of adequate
power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It
will also protect AC Adaptor from being damaged by accidental shorting that may occur during servicing.
When servicing, observe the original lead dress. If a short
circuit is found, replace all parts which have been overheated or damaged by the short circuit.
After servicing, see to it that all the protective devices
such as insulation barriers, insulation papers shields are
properly installed.
After servicing, make the following leakage current
checks to prevent the customer from being exposed to
shock hazards.
1.2.
Leakage Current Hot Check
(See Figure 1.)
Leakage Current Cold Check
1. Unplug the AC cord and connect a jumper between the
two prongs on the plug.
2. Measure the resistance value, with an ohmmeter,
between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads,
connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading
should be between 1 MΩ and 5.2 MΩ. When the exposed
metal does not have a return path to the chassis, the
reading must be infinity.
Figure. 1
3
2 Warning
2.1.
Prevention of Electrostatic Discharge (ESD) to Electrostatically
Sensitive (ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage
caused by electrostatic discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your
body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an antistatic solder removal device. Some solder removal devices not classified as "antistatic (ESD protected)" can
generate electrical charge sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be installed.
CAUTION :
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device).
2.2.
How to Recycle the Lithium Ion Battery (U.S. Only)
4
2.3.
2.3.1.
Caution for AC Cord
(For EB/GC)
2.3.2.1.
Important
The wires in this mains lead are coloured in accordance with
the following code:
Information for Your Safety
Blue
Brown
IMPORTANT
Your attention is drawn to the fact that recording of prerecorded tapes or discs or other published or broadcast
material may infringe copyright laws.
WARNING
To reduce the risk of fire or shock hazard, do not expose
this equipment to rain or moisture.
CAUTION
To reduce the risk of fire or shock hazard and annoying
interference, use the recommended accessories only.
FOR YOUR SAFETY
DO NOT REMOVE THE OUTER COVER
To prevent electric shock, do not remove the cover. No user
serviceable parts inside. Refer servicing to qualified service
Neutral
Live
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured
BLACK.
The wire which is coloured BROWN must be connected to the
terminal in the plug which is marked with the letter L or coloured
RED.
personnel.
2.3.2.
Under no circumstances should either of these wires be connected to the earth terminal of the three pin plug, marked with
the letter E or the Earth Symbol.
Caution for AC Mains Lead
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three-pin mains plug
for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5 amperes and it is approved
by ASTA or BSI to BS1362
Check for the ASTA mark or the BSI mark on the body of the
fuse.
2.3.2.2.
Before Use
Remove the Connector Cover as follows.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover, the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
Panasonic Dealer.
2.3.2.3.
How to Replace the Fuse
1. Remove the Fuse Cover with a screwdriver.
If the fitted moulded plug is unsuitable for the socket outlet in
your home then the fuse should be removed and the plug cut
off and disposed of safety.
There is a danger of severe electrical shock if the cut off plug is
inserted into any 13-ampere socket.
If a new plug is to be fitted please observe the wiring code as
shown below.
If in any doubt, please consult a qualified electrician.
2. Replace the fuse and attach the Fuse cover.
5
2.4.
2.4.1.
How to Replace the Lithium Battery
Replacement Procedure
1. Remove the SD HOLDER P.C.B.. (Refer to Disassembly Procedures.)
2. Remove the Lithium battery (Ref. No. “B6401” at foil side of SD HOLDER P.C.B.) and then replace it into new one.
NOTE:
This Lithium battery is a critical component.
(Type No.: ML-614S/ZTK Manufactured by Energy Company, Panasonic Corporation)
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in requirement designed specifically for its use.
Replacement batteries must be of same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
NOTE:
Above caution is applicable for a battery pack which is for HDC-HS80 series, as well.
1. Battery Pack for this model.
6
3 Service Navigation
3.1.
Introduction
This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
3.2.
General Description About Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30°C (86°F) more than that of the
normal solder.
Distinction of P.C.B. Lead Free Solder being used
Service caution for repair work using Lead Free Solder (PbF)
• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
(Definition: The letter of “PbF” is printed on the P.C.B. using the lead free solder.)
• To put lead free solder, it should be well molten and mixed with the original lead free solder.
• Remove the remaining lead free solder on the P.C.B. cleanly for soldering of the new IC.
• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the
lead free solder.
• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30°C
(662±86°F).
Recommended Lead Free Solder (Service Parts Route.)
• The following 3 types of lead free solder are available through the service parts route.
RFKZ03D01KS-----------(0.3mm 100g Reel)
RFKZ06D01KS-----------(0.6mm 100g Reel)
RFKZ10D01KS-----------(1.0mm 100g Reel)
Note
* Ingredient: tin (Sn) 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
3.3.
Important Notice 1:(Other than U.S.A. and Canadian Market)
1. The service manual does not contain the following information, because of the impossibility of servicing at component level
without concerned equipment/facilities.
a. Schematic diagram, Block Diagram and P.C.B. layout of MAIN P.C.B..
b. Parts list for individual parts for MAIN P.C.B..
When a part replacement is required for repairing MAIN P.C.B., replace as an assembled parts. (Main P.C.B.)
2. The following category is /are recycle module part. Please send it/them to Central Repair Center.
- MAIN P.C.B. (VEP03J12CN: HDC-HS80P/PC/PU/GT)
- MAIN P.C.B. (VEP03J12CP: HDC-HS80EB/EC/EG/EP)
- MAIN P.C.B. (VEP03J12CQ: HDC-HS80EE/GA/GC/GK/GN)
7
3.4.
How to Define the Model Suffix (NTSC or PAL model)
There are seven kinds of HDC-HS80.
• a) HDC-HS80P
• b) HDC-HS80PC
• c) HDC-HS80EB/EC/EG/EP/GN
• d) HDC-HS80EE
• e) HDC-HS80GK
• f) HDC-HS80GT
• g) HDC-HS80GA/GC/PU
What is the difference is that the “INITIAL SETTING” data which is stored in Flash ROM mounted on Main P.C.B..
3.4.1.
Defining methods:
To define the model suffix to be serviced, refer to the rating label and caution label which are putted on the Unit.
NOTE:
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
8
3.5.
Precautions for Handling HDD
1. Handle HDD very carefully to prevent the static electricity and shock.
2. Set the HDD quickly after taking it out from the package. Make sure to put the HDD on buffer materials, etc.
3.5.1.
Precautions at incoming process and for opening packages
9
3.5.2.
Precautions for installing HDD
10
3.5.3.
Precautions for inserting and removing HDD FPC
Make sure to use the tool (LSVQ0112) when locking and unlocking the lock lever of HDD FPC connector.
Do not lock the lock lever without inserting HDD FPC. Otherwise, the connector may be damaged.
11
Make sure to use the tool (LSVQ0112) when opening and closing the lock lever.
When install the HDD to main unit, necessary install the HDD FPC and HDD cushion.
12
3.6.
Formatting
13
4 Specifications
14
15
5 Location of Controls and Components
1
2
3
4
5
AV MULTI
6
7
8
1
2
3
Speaker
USB terminal [ ]
Intelligent auto/Manual button
[iA/MANUAL]
4 Optical image stabilizer button
[
O.I.S.]
5 Power button [
]
6 HDMI mini connector [HDMI]
7 AV multi connector
● Use the AV multi cable (only the supplied
cable).
8 Battery release lever [BATT]
9
9
Lens cover closing switch
The lens cover will open automatically when
set to
Motion Picture Recording Mode
or
Still Picture Recording Mode.
When not using the unit, close the lens
cover to protect the lens.
● Lens cover does not close automatically.
● Slide the Lens cover closing switch to
close the cover.
11
10
12
13
14 15 16
17
18
10 Lens cover
11 LED light
● It can be used as a Video light or Photo
light.
12 Lens
13 Internal stereo microphones
14
15
16
17
●
Mode switch
Status indicator
Recording start/stop button
LCD monitor (Touch screen)
It can open up to 90Q.
●
It can rotate up to 180Q towards the lens
or 90Qtowards the opposite direction.
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.
18 Battery holder
16
19
19 Tripod receptacle
● If you attach a tripod which has 5.5 mm
(0.22 S) screw or larger, it may damage
this unit.
20 SD card cover
21 Access lamp [ACCESS]
22 Card slot
20
21
22
23
24
27
23 Photoshot button [
]
24 Zoom lever [W/T] (In Motion Picture
Recording Mode or Still Picture
Recording Mode)
Thumbnail display switch [
/
]/
Volume lever [UVOLT] (In Playback
Mode)
25 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
25
26
Flip the belt.
Adjust the length.
Replace the belt.
26 DC input terminal [DC IN]
● Do not use any other AC adaptors except
the supplied one.
27 HDD access lamp [ACCESS HDD]
17
Selecting a mode
Change the mode to recording or playback.
Operate the mode switch to change the mode to
,
or
.
Motion picture recording mode
Still picture recording mode
Playback mode
How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with
your fingers.
■ Touch
Touch and release the touch screen to select icon or picture.
● Touch the centre of the icon.
● Touching the touch screen will not operate while you are
touching another part of the touch screen.
■ Slide while touching
Move your finger while pressing on the touch screen.
■ About the operation icons
/
/
/
:
These icons are used to switch the menu and thumbnail
display page, for item selection and setting etc.
:
Touch to return to the previous screen such as when
setting menus.
18
About the Touch Menu
Touch
(left side)/
Touch
●
(right side) of
on the Touch Menu to switch the operation icons.
(left side)/ (right side) of
on the Touch Menu.
It is also possible to switch the operation icons by sliding the Touch Menu right or left while
touching it.
Touch Menu
T
W
Recording Mode
T
Playback Mode
FOCUS
WB
W
ALL
SHTR
IRIS
MENU
MENU
Touch these icons to switch pages upward or downward.
Displayed only during the Manual Mode.
■ To display the Touch Menu
The Touch Menu will disappear when no function is
performed for a specific period of time during
Recording Mode. To display it again, touch
.
●
●
Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
Perform the touch screen calibration when the touch is not recognized or wrong location is
recognized.
19
6 Service Mode
1. Indication method of the service menu
Set the mode switch “Motion Picture Recording” mode.
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
Service mode menu
Screen display
1
Contents
Factory settings
2
Drive information display
3
4
HDD self check execution
Lock search history indication
5
Power ON self check result display
6
10
11
HDD hardware test
Erasing the lock histories
Erasing the internal media
management information
Camera data indications while the
video playback
12
Function
Function to throw a product up in a factory shipment state
(When recorded data in HDD, “error display” is done)
Fall detection frequency of HDD, Frequency that exceeds
highest/lowest operation guarantee temperature and serial
number display
Function to check self as for the state of HDD
Display the camera system error cord for three histories saved
in EEPROM
Power ON self check (function to diagnose correct function of
the device and interface between devices) result display
Function to confirm state of HDD hardware
Erasing the error histories (working time is not erased)
Erasing the internal media management information for fast
boot stored in IC3402(flash memory)
Display the camera informations (Shutter speed, Iris value,
White balance and focal length) while playing recorded video
NOTE:
Do not using service mode except above table of Service mode menu.
3. End method of the top screen of the service mode menu
Touch the [ EXIT ] of LCD to end the service mode, and then POWER OFF.
20
6.1.
Drive Information Display
Touch the [ 2 ] of LCD, select Drive Information display.
Operation specifications
Indication contents
• Drive Information display
Display the fall detection frequency of HDD, Frequency that exceeds highest/lowest operation guarantee temperature and serial
number.
Touch the [ BAK ] of LCD to end the service mode, and then POWER OFF.
6.2.
HDD Self Check Execution
Touch the [ 3 ] of LCD, select HDD self check execution.
Operation specifications
Indication contents
• HDD self check execution
Display the HDD self check result information.
Displays other than “OK” are abnormalities of HDD.
Touch the [ BAK ] of LCD to end the service mode, and then POWER OFF.
21
6.3.
Lock Search History Indication
Touch the [ 4 ] of LCD, select Lock search history indication.
Operation specifications
Indication contents
• Lock search history indication
Display the camera system error cord for three histories saved in EEPROM.
• The error cord contents which are displayed
Error code
51
52
53
71
73
33
Function
Focus control is abnormal
Zoom control is abnormal
OIS lens control is abnormal
Lens cover open/close is abnormal
High temperature is abnormal
Communication between IC2006 to IC3401 is abnormal
Cutting of battery connection or AC power supply connection to end the service mode.
6.4.
Power ON Self Check Result Display
Touch the [ 5 ] of LCD, select Power ON self check result display.
Operation specifications
Indication contents
• Power ON self check result display
Function to diagnose correct function of the device and interface between devices result display.
Display the following commnucation test result.
- CAM-PWR : Commnucation test between IC2006 to IC1503
- CAM-UNI : Commnucation test between IC2006 to IC3401
Display other than “OK” are abnomalities of each lines.
Cutting of battery connection or AC power supply connection to end the service mode.
22
6.5.
HDD Hardware Test
Touch the [ 6 ] of LCD, select HDD hardware test.
Operation specifications
Indication contents
• HDD hardware test
Display the HDD hardware test result information.
• The error cord contents which are displayed
Error code
NO ERROR
CTR ERROR
BUFF RAM ERROR
ECC DEV ERROR
CPU ERROR
COMMAND ERROR
Function
It is normal without the error
Controller Resistor Error
Buffer RAM Error
ECC device Error
CPU RAM/ROM Error
Reserved
In the above table, displays other than “NO ERROR” are abnormalities of HDD.
Cutting of battery connection or AC power supply connection to end the service mode.
6.6.
Erasing the lock histories
Touch the [ 10 ] of LCD, select erasing the lock histories execution.
Operation specifications
Indication contents
• Erasing the error histories stored in EEPROM. (working time is not erased)
Press the power button and turn off.
23
6.7.
Erasing the internal media management information
Touch the [ 11 ] of LCD, select erasing the internal media management information for fast boot stored in flash memory.
Operation specifications
Indication contents
• The fast boot management informations of the internal media are stored in the flash memory.
The following cases, be sure to implement for protection of customer's recorded data.
However, if there is no problem to delete customer's recorded data, erasing the internal media management information is not
required.
• Case1:
When replacing the flash memory chip (IC3402) or replacing the MAIN P.C.B. Unit.
Before checking the operations after replacing the parts, erasing the internal media management information.
• Case2:
When replacing the HDD Unit.
Before replacing the HDD Unit, erasing the internal media management information. then replace it new one.
CAUTION:
When turning the unit on after performing the above operation, the internal media management information is stored into the unit,
the playback of the recorded data is normally.
When not performing the above operation, the customer's recorded data will disappear.
Press the power button and turn off.
24
6.8.
Camera data indications while the video playback
Touch the [ 12 ] of LCD, select indicating the camera informations while playing back the recorded video.
Operation specifications
Indication contents
• While playing back the recorded videos, the camera informations (Shutter speed, Iris value, White balance and focal length) are
superimposed on the LCD screen.
Press the power button and turn off.
25
7 Service Fixture & Tools
7.1.
When Replacing the Main P.C.B.
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
7.2.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
1
2
3
4
5
Parts No.
RFKZ0448
RFKZ0444
VFK1480
VFK1440
RFKZ0379
Connection
FP6001(MAIN) - MONITOR FPC
PP6001(MAIN) - PS6401(SD HOLDER)
FP6003(MAIN) - ECM HOLL FPC(FRONT CASE UNIT)
FP6402(SD HOLDER) - TOP OPERATION UNIT(SIDE CASE-R UNIT)
PP6006(MAIN) - HDD FPC
26
Form
33PIN 0.3 FFC
50PIN 0.5 B to B
6PIN 0.5 FFC
10PIN 0.5 FFC
40PIN 0.5 B to B
27
8 Disassembly and Assembly Instructions
8.1.
Disassembly Flow Chart for the Unit
This is a disassembling chart.
When assembling, perform this chart conversely.
8.2.
PCB Location
28
8.3.
Disassembly Procedure for the Unit
No.
Item
1
Top Case Unit
Fig
(Fig. D1)
(Fig. D2)
(Fig. D3)
2
Side Case-L Unit
3
HDD Frame
DC Jack P.C.B.
(Fig. D4)
(Fig. D5)
(Fig. D6)
(Fig. D7)
4
Front Case Unit
(Fig. D8)
5
Camera Lens Unit
(Fig. D9)
6
Main P.C.B.
SD Holder P.C.B.
(Fig. D10)
7
Battery P.C.B.
(Fig. D11)
(Fig. D12)
(Fig. D13)
Removal
2 Screws (A)
1 Screw (B)
3 Screws (C)
4 Locking tabs
PP6006(Connector)
Closing Lever Base
Lens Cover Closing Lever
2 HDD Cushions
HDD Unit
Top Case Unit
1 Screw (D)
1 Screw (E)
3 Locking tabs
1 Convex
1 Projection part
Side Case-L Unit
2 Screws (F)
P6751(Connector)
1 Convex
3 Projection parts
1 Locking tab
2 Projection parts
1 Screw (G)
HDD Frame
DC Jack P.C.B.
1 Screw (H)
1 Screw (I)
FP6003 (Flex)
P6002(Connector)
P6004 (Connector)
1 Rib
Front Case Unit
FP6008 (Flex)
P6001 (Connector)
1 Convex
Camera Lens Unit
5 Screws (J)
P6003 (Connector)
P6401 (Connector)
FP6001 (Flex)
FP6402 (Flex)
2 Ribs
SD Holder P.C.B.
Main P.C.B.
NOTE: (When Installing)
2 Locking tabs
1 Hanging part
1 Screw (K)
3 Ribs
S/S Lever Angle
S/S Lever
Battery P.C.B.
8.3.1.
Removal of the Side Case-L Unit
and HDD Unit
(Fig. D1)
29
(Fig. D3)
8.3.2.
Removal of the Top Case Unit
(Fig. D2)
(Fig. D4)
30
(Fig. D5)
8.3.3.
Removal of the HDD Frame and DC
Jack P.C.B.
(Fig. D7)
(Fig. D6)
31
8.3.4.
Removal of the Front Case Unit
8.3.5.
Removal of the Camera Lens Unit
(Fig. D9)
(Fig. D8)
32
8.3.6.
Removal of the Main P.C.B. and SD
Holder P.C.B.
(Fig. D11)
(Fig. D10)
33
8.3.7.
Removal of the Battery P.C.B.
(Fig. D13)
(Fig. D12)
34
9 Measurements and Adjustments
9.1.
•
•
•
•
Electric Adjustment
Adjustment method is different from a conventional High definition video camera.
An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
A USB driver for service is necessary to communication with PC.
Connection method of the main unit and an exclusive adjustment jig as follows
9.1.1.
Adjustment Procedure
• Connect the main unit to PC with USB.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
Figure of connection
Figure of image when adjustment
Part Number of jig
• Only a necessary jig mentions it in setup of electric adjustment.
No.
1
2
3
4
Part Name
PC
AC Adaptor
USB Cable
Adjustment Software (Tatsujin)
Part Number
---------------------
35
Remarks
Adjustment Items
• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
36
10 Factory Setting
10.1. How To Turn On The Factory Settings?
1. Set the mode switch “Motion Picture Recording” mode.
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed or “HDD NODATA” as “NG” is displayed on LCD monitor. Cutting of battery connection
or AC power supply connection as a completion of the “FACTORY SETTINGS”.
(After use at least once, even if the physical format of the HDD unit will be performed, “HDD NODATA” as “NG” is indicated,
but “FACTORY SETTINGS” is completed.)
37
10.2. What Is The Factory Settings?
The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
If the "Factory Settings" is completed, physical format of the HDD unit is not performed, execute physical format according to the
following procedure.
The setting position of factory settings:
Name
Mode switch
Setting position
Motion picture recording mode
38
VM1102015CE
Service Manual
Diagrams and Replacement
Parts List
High Definition Video Camera
Model No.
HDC-HS80P
HDC-HS80PC
HDC-HS80PU
HDC-HS80EB
HDC-HS80EC
HDC-HS80EE
HDC-HS80EG
HDC-HS80EP
HDC-HS80GA
HDC-HS80GC
HDC-HS80GN
HDC-HS80GT
HDC-HS80GK
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
Circuit name being connected.
OFTR
Vol. 1
Colour
(K)...........Black Type
Name of Signal
Table of contents
S1. About Indication of The Schematic Diagram............................. S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart............................................................................ S-2
S2.1. SD P.C.B................................................................................ S-2
S3. Block Diagram........................................................................... S-3
S3.1. Overall Block Diagram........................................................... S-3
S4. Schematic Diagram................................................................... S-4
S4.1. Interconnection Diagram........................................................ S-4
S4.2. SD Schematic Diagram.......................................................... S-5
S5. Print Circuit Board..................................................................... S-6
S5.1. SD P.C.B................................................................................ S-6
S6. Replacement Parts List............................................................. S-7
S7. Exploded View........................................................................ S-11
S7.1. Frame and Casing Section.................................................. S-11
S7.2. Packing Parts and Accessories Section............................... S-12
S-1
FEP
This signal is connected
to the FEP schematic diagram.
S2. Voltage Chart
Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard.
Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
S2.1. SD P.C.B.
REF No.
Q3901
Q3901
Q3901
QR6401
QR6401
QR6401
QR6402
QR6402
QR6402
PIN No.
E
C
B
E
C
B
E
C
B
POWER ON
3.3
0
3.3
2.9
-0.4
2.9
2.9
-0.4
2.9
S-2
S3. Block Diagram
S3.1. Overall Block Diagram
NOTE
: VIDEO SIGNAL
: AUDIO SIGNAL
SHUTTER
: CLK or CONTROL LINE
LENS(F1.8-4.0 37x)
ZOOM/
FOCUS
MOTOR/
OIS
IRIS
IC201
MOS IMAGE
SENSOR
HDD
120GB
COLOR LCD
PANEL
IC202,304
GATE
IC3702
HD VIDEO
AMP
Analog
X301
OSC
(60MHz)
Analog
A/V
MULTI
TERMINAL
Analog
IC701
LENS/OIS DRIVE
Analog
IC3701
AVIO
IC301
CAMERA DSP
(BIANCA2)
IC6401
GYRO
SENSOR
IC3401
MPEG CODEC
(UNI PHIER XP2)
ECM
Analog
SPEAKER
IC3301
G SENSOR
IC1701
PHOTO LIGHT
DRIVER
IC3801
HDMI
LSI
HDMI mini
CONNECTOR
TOUCH PANEL
IC2006
SYSTEM CONTROL
(CAMERA MICROCOMPUTER)
IC3402
NAND
FLASH ROM/
512Mbit
OPERATION
CLK13M
IC3403
PLL
CLK12M
IC2002
EEPROM
DC IN
BATTERY
IC1501-1503
RTC/CHARAGE/
POWER CONTROL
X2303
(32.768kHz)
IC1001
POWER
CIRCUIT
IC302,305,703,1002,
1011,1301,1421,1423,1471
REGULATOR
SD
CARD
USB TERMINAL
HDC-HS80 OVERALL BLOCK DIAGRAM
S-3
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
D GND
D GND
PW LCDBL L
PW LCDBL H
S AD TPX TOP
S AD TPX BOT
LCD RVS
D GND
PW REG3V
BUS9 LCD V
BUS9 LCDYC7
BUS9 LCDYC5
BUS9 LCDYC3
BUS9 LCDYC1
PW REG1R8V
S CS LCD
FP6001
D GND
D GND
D GND
PW LCDBL L
PW LCDBL H
S AD TPY LEFT
S AD TPY RIGHT
D GND
CLK18 LCD
PW REG3V
BUS9 LCD H
BUS9 LCDYC6
BUS9 LCDYC4
BUS9 LCDYC2
BUS9 LCDYC0
S DO LCD
S CLK LCD
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
S CLK LCD
S CS LCD
PW REG1R8V
BUS9 LCDYC1
BUS9 LCDYC3
BUS9 LCDYC5
BUS9 LCDYC7
BUS9 LCD V
PW REG3V
D GND
LCD RVS ON L
S AD TPX BOT
S AD TPX TOP
PW LCDBL H
PW LCDBL L
D GND
D GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
S CLK LCD
S DO LCD
BUS9 LCDYC0
BUS9 LCDYC2
BUS9 LCDYC4
BUS9 LCDYC6
BUS9 LCD H
PW REG3V
CLK18 LCD
D GND
S AD TPY RIGHT
S AD TPY LEFT
PW LCDBL H
PW LCDBL L
D GND
D GND
FP901
MONITOR P.C.B.
(FOIL SIDE)
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
VGL2
VCC1
VCOMH
IOVCC
SDI
CS
DB1
DB3
DB5
DB7
VSYNC
GND
VCL
C13P
C11M
C12M
VCI1
VGH
C22M
C21M
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
FP904
4
3
2
1
MAIN P.C.B.
(FOIL SIDE)
: (COMPONENT SIDE)
GND
GND
VDD
VCOML
SDO
SCL
DB0
DB2
DB4
DB6
HSYNC
DCLK
VREG
C13M
DDVDH
C11P
C12P
VCC2
C22P
C21P
VGL1
FP905
Y TOP
X LEFT
Y BOT
X RIGHT
S-4
25 CARD LED
24
D_GND
23 G GYRO REF
22 G GYRO P
21 G GYRO Y
20 PW GYRO3V
19 GYRO GND
18 GYRO GND
17
SP OUT2
16
SP OUT1
15
D GND
14
D13
D+
12
D GND
11
D GND
10
D GND
9
D GND
8
SD CMD
7
D GND
6
SD CLK
5
D GND
4
SD DATA2
3
SD DATA3
2
SD DATA0
1
SD DATA1
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
PP6001
NOREG
NOREG
NOREG
NOREG
NOREG
NOREG
NOREG
HDD ACC LED
ZOOMAD
POWER LED
E KEYIN1
USB ID
STANDBY LED
E CARD DET
POHOT2 ZENOSHI
VBUS
VBUS
E KEYIN4
E CARD PRO
POWER SW
PW LIBATT
PW SD3R2V
PW SD3R2V
PW SD3R2V
PW REG3V
1 HDD ACC LED
2
ADP+
3
ADP+
4
D GND
5
D GND
BATTERY CATCHER P.C.B.
(FOIL SIDE)
PP6006
40
HDD FPC
HDD
1 HDD ACC LED
2
PW ADP+
3
PW ADP+
4
D GND
5
D GND
P6751
PHOTO HANOSHI
GND
ZOOM AD
AVREF
PHOTO2 ZENOSHI
STANDBY LED
POWER LED
GND
AVREF
VTR KEY 1
P6
1
P6002
2
EVR
S
SP P O
O UT
UT 1
2
TEMP GND
TEMP OUT
HDD3R3V
DASP
CS0
DA0
INTRQ
HDD GND
HDD GND
DIOW
DMARQ
ATADATA15
ATADATA14
ATADATA13
ATADATA12
ATADATA11
ATADATA10
ATADATA9
ATADATA8
HDD GND
1
2
3
4
+
T
D
-
JK6701
RL7503 RL7502
FP6402
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
BATTBATTD
T
BATT+
BATT+
P6003
ZENC VCC
ZLEDCONT
IRHOIRHO+
IRMFAN
FAP
FABS
ZBN
ZAP
YAWDRV+
YAWHINYAWHIN+
PITHINPITHIN+
PITDRV+
MIC
BATT +
BATT +
T
D
BATT BATT -
10
9
8
7
6
5
4
3
2
1
TEMP VCC
1
HDD3R3V
2
3 HDD UNLOAD
CS1
4
DA2
5
DA1
6
DMACK
7
IORDY
8
DIOR
9
HDD GND
10
HDD GND
11
ATADATA0
12
ATADATA1
13
ATADATA2
14
ATADATA3
15
ATADATA4
16
ATADATA5
17
ATADATA6
18
ATADATA7
19
RESET
20
6
5
4
3
2
1
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
FP6008
LENS TEMP
ZABS
IRHINIRHIN+
IRM+
FBN
FBP
FENCVCC
FLEDCONT
ZAP
ZAN
YAWDRVYAWHOYAWHO+
PITHOPITHO+
PITDRV-
LENS
BARRIER
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
P6701
25 CARD LED
24
D_GND
23 G GYRO REF
22 G GYRO P
21 G GYRO Y
20 PW GYRO3V
19 GYRO GND
18 GYRO GND
17
SP OUT2
16
SP OUT1
15
D GND
14
D13
D+
12
D GND
11
D GND
10
D GND
9
D GND
8
SD CMD
7
D GND
6
SD CLK
5
D GND
4
SD DATA2
3
SD DATA3
2
SD DATA0
1
SD DATA1
P6001
1
TRACEPKT7
30
UARTO
2
TRACEPKT6
29
UARTI
3
TRACEPKT5
28
PW REG5V
4
AFST
27
E CAM RST
5
GND
26
OCD SDA
6
BUS8 TRST
25
OCD SCL
7
BUS8 TDI
24
TRACECLK
8 TRACESYNC/EVRINJ 23
BUS8 TMS
9 TRACEPKT0/EVRINJ 22
CLK16 TCK
10 TRACEPKT1 21 BUS8 EXTRGO
11 TRACEPKT2 20
BUS15 TDO
12 TRACEPKT3 19
MVD
13 TRACEPKT4 18
GLVD
14 S AMMPTXD 17
GND
15
16 S AMMPRXD
G XP2 RST
1
2
3
4
5
6
NOREG
NOREG
NOREG
NOREG
NOREG
NOREG
NOREG
HDD ACC LED
ZOOMAD
POWER LED
E KEYIN1
USB ID
STANDBY LED
E CARD DET
POHOT2 ZENOSHI
VBUS
VBUS
E KEYIN4
E CARD PRO
POWER SW
PW LIBATT
PW SD3R2V
PW SD3R2V
PW SD3R2V
PW REG3V
P6004
2 LENSBA SOL +
1 LENSBA SOL -
PHOTO LIGHT P.C.B.
(FOIL SIDE)
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
ECM R
ECM R
D GND
D GND
ECM L
ECM L
FP6003
3 LED LIGHT ANODE
2 LED LIGHT NTC
1 LED LIGHT CATHODE
6
5
4
3
2
1
LENS UNIT
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
MOS UNIT
NC
NC
NC
RSTN
SDI
HD
SCK
SCS
VD
MCLK
D2.7V
DOBP
DOBM
DCKP
DCKM
DOAP
DOAM
A1.8V
A1.8V
A1.8V
RL7501
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
S4. Schematic Diagram
S4.1. Interconnection Diagram
BATTERY
DC JACK P.C.B.
(COMPONENT SIDE)
P6751
OPERATION SW
SPEAKER
: (COMPONENT SIDE)
ECM FPC
1
PS6401
SD HOLDER P.C.B.
(FOIL SIDE)
MONITOR FPC
LCD UNIT
TOUCH PANEL
HDC-HS80 INTERCONNECTION DIAGRAM
S4.2. SD Schematic Diagram
G2
FP6402
K1MY10BA0370
10 PHOTO1_HANOSHI
STANDBY_LEDB
G
ZSW
PHOTO_ZENOSI
STANDBY_LED
E_CARD_DET
5
7
4
6
8
E_KEYIN1
C3909
0.1
GND
PHOTO_ZENOSI
E_CARD_DET
ZSW
C6412
25V
CARD_LED_B
GYRO_GND
*
QR6403
*
C6406
$
NC
VregA
CL6402
4 AGND2
SCLK
CL6405
CSB
OUTA 10
Vdd
3 V1
DGND
OUTB 11
5
6
7
8
NOREG
26
NOREG
25
CARD_LED
24
D_GND
23
G_GYRO_REF
22
G_GYROP
21
20
G_GYROY
PW_GYRO3V
19
GYRO_GND
18
GYRO_GND
17
SP_OUT2
16
SP_OUT1
15
D_GND
14
USB_D+
10V10u[22]
CL6403
SL 12
2 AGND1
0.1
0.1
0.1
OUTMODE
1 Vcc
10V
16V
5
USB_D+
3
C6405
GND
2
C6404
4
16V
3
ID
USB_D-
4
16V
D+
1
C6403
2
C6408
10V1[18]
D-
FL6401
$[EXC14CE900U]
D-
13
D+
12
D_GND
11
D_GND
10
G_GYROP
CLK24_SDCMD
G_GYROY
9
CL6401
CLK49_SDCARD
BUS24_SDDAT2
BUS24_SDDAT3
BUS24_SDDAT0
D_GND
9
D_GND
8
SD_CMD
7
D_GND
6
SD_CLK
5
D_GND
4
SD DATA2
3
SD DATA3
2
BUS24_SDDAT1
G_GYRO_REF
SD DATA0
1
B1GDCFYY0010
USB_IDDET_L
SD DATA1
G1
G4
QR6402
1
S6401
K0H1BA000580
S6402
K0H1BA000580
5
1
S6403
K0H1BA000580
D6451
SPOUT1
SPOUT2
K3ZZ00500014
ZB6401
5
B3AAB0000343
COIN_BATT
1
2
VA6404
5
4
D4ED18R00003
2
CARD_LED
S6404
K0F111A00475
4
3000[15]
R6406
2
3
3900[15]
R6407
4
D4ED18R00003
B
3
R6408
3
22K[15]
1K[15]
R6403
B6401
ML-614S/ZTK
G1
$[D4ED18R00008]
G2
1
VA6403
G
VBUS
VA6402
JK6402
K2HZ105E0013
C
PW_VBUS_3
G4
VregD
EWTS9PSL11
PW_VBUS
Vref
R6410
D1JBR084A023
C6401
R6402
HDD_ACC
USB_D-
R6411
$[18]
2200[15]
R6404
$
検出軸と実装方向は最終確認すること
IC6401
G
ZOOMAD
27
GYRO SENSOR
PW_VBUS_2
G3
POWER_LED
NOREG
3
R6409
D1JBR084A023
E_KEYIN1
35
NOREG
VA6401
$[D4ED1270A011]
16 15 14 13
[USB JACK]
USB_ID
36
NOREG
10V
1
E_CARD_DET
STANBY_LED
28
CL6404
G1
39
NOREG
G2
HDD_ACC_LED
VBUS
PHOTO2_ZENOSHI
29
PW_GYRO3V
2
VBUS
40
30
G_GYROY
PW_ADP_+
E_KEYIN4
31
R6401
4
43
IP6401
*
*
G2
5
E_CARD_PRO
NOREG
G_GYROP
D_GND
PW_ADP_+
POWER_SW
44
HDD_ACC_LED
LB6402
*
D_GND
PW_LIBATT
45
34
G_GYRO_REF
D
PW_SD3R2V
37
POWER_LED
GND_ADP_-
P6402
*
PW_SD3R2V
47
32
LB6401
PW_ADP_+
48
38
USB_IDDET_L
$
$
1
2
GND
PW_SD3R2V
41
E_KEYIN1
13
SD CARD CONNECTOR
PW_REG3V
49
42
PW_VBUS
STANDBY_LEDB
$
9
D2
E_KEYIN4
25V1[18]
2
1
D3
E_CARD_PRO
3
-
2
CMD
POWER_SW
G3
50
33
1
1
N.C
A
GND
VTR_KEY_1
46
2
G1
+
3B
GND
GND
AVREF
1
[IP6401 4]
JK6401
*
4A 3
VCC
COIN_BATT+
C3905
14
4B
C3904
WP
5
CLK
VCC
HS3901
K1NA09E00098
$
6
GND
RX3901
D1H85604A024
$
7
D0
BUS24_SDDAT2
C3903
C.DET
E
8
D1
12
BUS24_SDDAT3
C3902
11
BUS24_SDDAT0
C3901
10
7
BUS24_SDT02
BUS24_SDDAT1
4
3
5
BUS24_SDT03
POWER_LED
2
G2
PW_REG3V
CLK24_SDCMD
6
BUS24_SDT00
STANDBY_LED
4
PS6401
K1KB50AA0094
PW_SD3R2V
8
BUS24_SDT01
56
PHOTO2_ZENOSHI
5
16V
CLK49_SDCARD
R3902
6
R3909
33K
22 R3901
CLK24_SDCMD0
AVREF
G1
15[18]
C3911
1u[15]
R3903
2
F
R3910
ZOOMAD
7
3
100[15]
R6405
16V
3
6.3V
1
10K
0.01
0.01
D1H81034A024
RX3902
R3908
$[18] PW_SD3R2V_1
Q3901
R3905 B1ADKB000015
330
25V
25V
C3910
6.3V
C3908
F3G0J107A017
C3907
C3906
0.1
16V
VA3901
$[D4ED18R00008]
R3904
270
GND
8
0.1
C6407
E_CARD_PRO
1K
PW_REG3V
1K
R3907
B1GDCFYY0010
QR6401
R3906
POWER_LED
9
P6401
K1KA02BA0014
G1
1
SP_OUT1
2
SP_OUT2
G2
SD_HOLDER_PCB
POWER_OFF/ON
1
A
26
1
2
OIS
VariationCategory
TM45/SD80
IP6401
K5H4021A0011
JK6401
K2EBYB000003
LB6401
J0JJC0000015
LB6402
J0JJC0000015
P6402
$[K1KY05BA0314]
QR6403
$[B1GDCFYY0010]
R6404
$[15]
3
4
HS80
$[K5H4021A0011]
$[K2EBYB000003]
$[J0JJC0000015]
$[J0JJC0000015]
K1KY05BA0314
B1GDCFYY0010
1K[15]
IA
S/S
RL6401
FRAMEGND
RL6402
1FRAMEGND
HDC-HS80
SD
Schematic Diagram
5
6
S-5
7
8
9
10
S5. Print Circuit Board
S5.1. SD P.C.B.
G
S6404
1
MK6
2
2
P6
40
1
R6410
IP6401
1
C6412
R3909
R3904
JK6401
C3911
C3907
Q3901
3
2
R3908
10
11
4
R6405
LB6402
5
VA6402
C3909
C3908
4 3
FL6401
1 2
JK6402
1 2 3 4 5
R3905
LB6401
C6408
R3910
E
MK1
VA6401
R6409
F
MK2
RL6401
VA6404
R3907
MK5
1
2
1
5
10
R6404
RX3901
CL6401
1
VA3901
C3906
R3903
R6411
R3902
2
R3906
9
C3910
1
ZB6401
2
R6401
3
25
3
20
4
15
4
10
5
5
6
1
7
R6408
R3901
C3905
7
6
5
4
8
8
15
14
3
12
9
16
13
2
C6405
C6403
1
10
11
12
1
C6404
C
RX3902
3
IC6401
C6401
5
4
C3904
C3903
S6402
C3901
R6402
CL6402
CL6403
5
C3902
C6406
HS3901
CL6405
R6407
CL6404
4
D
R6406
3
P6402
2
R6403
1
e
1
QR6401
3
e
QR6402
FP6402
e
S6403
QR6403
5
4
2
3
C6407
MK4
VA6403
50
45
40
35
30
26
13
RL6402
14
D6451
B
(Foil Side)
(Component Side)
A
HDC-HS80
SD P.C.B.
1
2
3
4
5
6
S-6
7
8
9
10
1
MK3
MK7
2
MK8
S6401
PS6401
S6. Replacement Parts List
Note:
1.* Be sure to make your orders of replacement parts according to this list.
2. IMPORTANT SAFETY NOTICE
Components identified with the mark
have the special characteristics for safety.
When replacing any of these components, use only the same type.
3. Unless otherwise specified,
All resistors are in OHMS, K=1,000 OHMS. All capacitors are in MICRO-FARADS (uf), P=uuF.
4. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation
of this assembly in production, it will no longer be available.
E.S.D. standards for Electrostatically Sensitive Devices, refer to “PREVENTION OF
ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES”
section.
S-7
HDC-HS80P-K vol.1
Ref.No.
Part No.
Part Name & Description
##
##
VEP03J12CP
VEP03J12CQ
MAIN P.C.B. UNIT
MAIN P.C.B. UNIT
##
##
##
VEP03J12CN
VEP03J16B
VEP79298A
MAIN P.C.B. UNIT
SD HOLDER P.C.B. UNIT
HDD FPC UNIT
Pcs
Remarks
1 (RTL) E.S.D. EB,EC,EG,EP
1 (RTL) E.S.D.
EE,GC,GK,GN,GA
1 (RTL) E.S.D. GT,P,PC,PU
1 (RTL) E.S.D.
1
Ref.No.
VEP03J16B
SD HOLDER P.C.B. UNIT
ML-614S/ZTK
BATTERY
1 [ENERGY]
C3906
C3907
C3908
C3909
C3910
C3911
C6401
C6403
C6404
C6405
C6407
C6408
C6412
F1G1C104A077
F3G0J107A017
F1G1E1030005
F1G1C104A077
F1G1E1030005
F1G0J1050007
F1J1A106A043
F1G1C104A077
F1G1C104A077
F1G1C104A077
F1G1C104A077
ECJ1VB1A105K
F1H1E105A116
C.CAPACITOR CH 16V 0.1U
C.CAPACITOR CH 6.3V 100U
C.CAPACITOR CH 25V 0.01U
C.CAPACITOR CH 16V 0.1U
C.CAPACITOR CH 25V 0.01U
C.CAPACITOR CH 6.3V 1U
C.CAPACITOR CH 10V 10U
C.CAPACITOR CH 16V 0.1U
C.CAPACITOR CH 16V 0.1U
C.CAPACITOR CH 16V 0.1U
C.CAPACITOR CH 16V 0.1U
C.CAPACITOR CH 10V 1U
C.CAPACITOR CH 25V 1U
1
1
1
1
1
1
1
1
1
1
1
1
1
D6451
B3AAB0000343 LED
FP6402
K1MY10BA0370 CONNECTOR
HS3901
K1NA09E00098 SD CARD SLOT
1
IC6401
EWTS9PSL11
1 E.S.D.
JK6402
K2HZ105E0013 JK, USB
P6401
P6402
K1KA02BA0014 CONNECTOR
K1KY05BA0314 CONNECTOR
2P
5P
1
1
PS6401
K1KB50AA0094 CONNECTOR
50P
1
Q3901
B1ADKB000015 TRANSISTOR
1 E.S.D.
QR6401
QR6402
QR6403
B1GDCFYY0010 TRANSISTOR
B1GDCFYY0010 TRANSISTOR
B1GDCFYY0010 TRANSISTOR
1 E.S.D.
1 E.S.D.
1 E.S.D.
B6401
ZB6401
K3ZZ00500014
BATTERY HOLDER
1
VEP79298A
HDD FPC UNIT
##
R3901
R3902
R3903
R3904
R3905
R3906
R3907
R3909
R3910
R6402
R6403
R6404
R6405
R6406
R6407
R6408
R6409
R6410
ERJ2GEJ470
ERJ2GEJ560X
ERJ2GEJ103
ERJ2GEJ271
ERJ2GEJ331
ERJ2GEJ102Y
ERJ2GEJ102Y
ERJ2GEJ333
D0GB150JA057
ERJ2GEJ222
ERJ2GEJ102Y
ERJ2GEJ102Y
ERJ2GEJ101
ERJ2GEJ302
ERJ2GEJ392
ERJ2GEJ223
D1JBR084A023
ERJ3GEY0R00
1 E.S.D.
1
IC
1
M.RESISTOR CH 1/16W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/16W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/16W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/16W
M.RESISTOR CH 1/10W
M.RESISTOR CH 1/16W
FUSE RESISTOR
M.RESISTOR CH 1/10W
47
56
10K
270
330
1K
1K
33K
15
2.2K
1K
1K
100
3K
3.9K
22K
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
RX3901
RX3902
D1H85604A024 RESISTOR NETWORKS
EXB28V103JX RESISTOR NETWORKS
1
1
S6401
S6402
S6403
S6404
K0H1BA000580
K0H1BA000580
K0H1BA000580
K0F111A00475
1
1
1
1
VA6403
D4ED18R00003 VARISTOR
SWITCH
SWITCH
SWITCH
SWITCH
Pcs
1
(RTL) E.S.D.
10P
Part Name & Description
D4ED18R00003 VARISTOR
PS6201
##
Part No.
VA6404
1
S-8
K1KB40A00128 CONNECTOR
40P
1
Remarks
HDC-HS80P-K vol.1
Ref.No.
Part No.
Part Name & Description
Pcs
Remarks
1
1
VEP03J12CP
VEP03J12CQ
MAIN P.C.B. UNIT
MAIN P.C.B. UNIT
1
2
3
4
5
6
7
9
10
11
12
13
14
VEP03J12CN
VEP03J16B
VEP79298A
VYK4N06
VYK4N05
VYK4M77
VXW1217
VYK4N02
VEE1K00
RFKV0220HDKT
VMG1922
VMG1922
VYK4N01
MAIN P.C.B. UNIT
SD HOLDER P.C.B. UNIT
HDD FPC UNIT
TOP CASE UNIT
SIDE CASE-L UNIT
FRONT CASE UNIT
CAMERA LENS UNIT
SIDE CASE-R UNIT
DC JACK WIRE
HDD UNIT
HDD CUSHION
HDD CUSHION
HDD FRAME UNIT
1 (RTL) E.S.D. EB,EC,EG,EP
1 (RTL) E.S.D.
EE,GC,GK,GN,GA
1 (RTL) E.S.D. GT,P,PC,PU
1 (RTL) E.S.D.
1
1
1
1
1
1
1
1
1
1
1
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
XQN16+BJ6FJK
XQN16+B4FJK
XQN16+B4FJK
XQN16+B4FJK
XQN16+BJ6FJK
XQN16+BJ6FJK
XQN16+B4FJK
XQN16+B4FJK
XQN16+B4FJK
XQN16+B4FJK
XQN16+B4FJK
XQN16+B4FJK
VHD1919
VHD1919
VHD1919
XQN16+B4FJK
XQN16+B4FJK
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Ref.No.
S-9
Part No.
Part Name & Description
Pcs
Remarks
HDC-HS80P-K vol.1
Ref.No.
Part No.
Part Name & Description
301
302
303
304
305
--K1HY12YY0008
K1HA05AD0007
K2CA2CA00025
VSK0712
BATTERY PACK
MULTI D/RCA CABLE
USB CABLE
AC CABLE
AC ADAPTOR
305
305
305
306
307
VSK0713
VSK0714
VSK0711
VGQ0C14
VFF0718-S
AC ADAPTOR
AC ADAPTOR
AC ADAPTOR
STYLUS PEN
CD-ROM
307
309
310
VFF0719-S
VPF1294
VQT3J26
310
VQT3J22
310
VQT3J30
310
VQT3J19
310
VQT3J21
310
VQT3J24
310
VQT3J27
310
VQT3J28
310
VQT3J31
310
VQT3J32
310
VQT3J15
310
VQT3J16
310
VQT3J17
310
VQT3J18
310
VQT3M57
311
VPG2U97
CD-ROM
BAG, POLYETHYLENE
OPERATING INSTRUCTIONS
(ENGLISH)
OPERATING INSTRUCTIONS
(PORTUGUESE/SPANISH/
SWEDISH/DANISH/FRENCH)
OPERATING INSTRUCTIONS
(RUSSIAN/UKRAINIAN)
OPERATING INSTRUCTIONS
(GERMAN/TURKISH/ITALIAN/
DUTCH)
OPERATING INSTRUCTIONS
(FRENCH)
OPERATING INSTRUCTIONS
(ENGLISH/POLISH/CZECH/
HUNGARIAN)
OPERATING INSTRUCTIONS
(ENGLISH)
OPERATING INSTRUCTIONS
(ARABIC/PERSIAN)
OPERATING INSTRUCTIONS
(CHINESE(SIMPLIFIED))
OPERATING INSTRUCTIONS
(CHINESE(TRADITIONAL))
OPERATING INSTRUCTIONS
(ENGLISH)
OPERATING INSTRUCTIONS
(CANADIAN FRENCH)
OPERATING INSTRUCTIONS
(ENGLISH)
OPERATING INSTRUCTIONS
(SPANISH)
OPERATING INSTRUCTIONS
(ENGLISH)
PACKING CASE
311
311
312
313
314
314
315
316
317
318
319
320
VYQ6503
VPG2U96
VPN6970
VPF1388
VFF0776
VFF0777
K2CT39A00002
K2CQ29A00002
K2CA2YY00070
K2CJ29A00002
K2CA29A00021
VPQ0308
PACKING CASE UNIT
PACKING CASE
PAD
PROTECT BAG
CD-ROM(O/I)
CD-ROM(O/I)
AC CORD W/PLUG
AC CORD W/PLUG
AC CORD W/PLUG
AC CORD W/PLUG
AC CORD W/PLUG
PROTECT SHEET
Pcs
Remarks
Ref.No.
1
1
1
1 P,PC,PU
1 EB,EC,EE,EG,EP,GC,GN,PU,
GA
1 GK
1 GT
1 P,PC
1
1 EB,EC,EE,EG,EP,GC,GN,GT,
P,PC,PU,GA
1 GK
1
1 EB
1 EC
1 EE
1 EG
1 EG
1 EP
1 GC,GN,GA
1 GC
1 GK
1 GT
1 P,PC
1 PC
1 PU
1 PU
1 GA
1 EB,EC,EE,EG,EP,GC,GN,GT,
PU,GA
1 GK
1 P,PC
1
1
1 EC,EG,EP
1 EE,GC,GN,GA
1 EB,GC,GA
1 EC,EE,EG,EP,GC,GA
1 GK
1 GN
1 GT
1
S-10
Part No.
Part Name & Description
Pcs
Remarks
S7. Exploded View
S7.1. Frame and Casing Section
4
B9
12
B10
5
B8
B7
3
B4
11
B3
13
7
B17
B16
14
10
B14
B12
B11
9
B13
B15
2
B5
1
B6
B1
6
B2
S-11
S7.2. Packing Parts and Accessories Section
302
306
303
307
314
(HDC-HS80GN)
318
(HDC-HS80
EC/EE/EG/EP/GA/GC)
316
309
310
(HDC-HS80EB/GA/GC)
315
(HDC-HS80GT)
305
(HDC-HS80GK)
319
317
320
301
(HDC-HS80P/PC/PU)
304
313
312
311
S-12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement