1 - MTH Trains
John Deere
4-6-0 Steam Freight Set
Operation Manual
www.railking.com
Thank you for purchasing this RailKing product.
PLEASE READ BEFORE USE AND SAVE
Table of Contents
Set Up Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembling RealTrax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting the Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Lubricating the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Priming the Smoke Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Coupling the Engine and Cars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Speed Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Direction Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Proto-Cast and Proto-Dispatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Manual Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Care of Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Lubrication and Greasing Instructions . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning the Wheels, Tires and Track. . . . . . . . . . . . . . . . . . . . . . . . 12
Locomotive Traction Tire Replacement . . . . . . . . . . . . . . . . . . . . . . 12
Smoke Unit Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Locomotive Light Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . 13
Caboose Light Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
RailWare Interactive CD ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Transformer Compatibility Chart . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Exploded View Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Service and Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . 24
CAUTION: ELECTRICALLY OPERATED PRODUCT:
Not recommended for children under 10 years of age. M.T.H. recommends adult supervision with children ages 10 16. As with all electric products, precautions should be observed during handling and use to reduce the risk of electric
shock.
WARNING: When using electrical products, basic safety precautions should be observed, including the following:
Read this manual thoroughly before using this device.
l
M.T.H. recommends that all users and persons supervising use examine the hobby transformer and other electronic equipment
periodically for conditions that may result in the risk of fire, electric shock, or injury to persons, such as damage to the primary
cord, plug blades, housing, output jacks or other parts. In the event such conditions exist, the train set should not be used until
properly repaired.
l
Do not operate your layout unattended. Obstructed accessories or stalled trains may overheat, resulting in damage to your
layout.
l
This train set is intended for indoor use. Do not use if water is present. Serious injury or fatality may result.
l
Do not operate the hobby transformer with damaged cord, plug, switches, buttons or case.
l
The transformer was designed to operate on regular US household current (120 volt, 50-60 Hertz). Do not connect to any other
source of power.
l
To avoid the risk of electrical shock, do not disassemble the transformer unit. There are no user-serviceable parts inside. If the
unit is damaged contact M.T.H. Service for instructions.
l
The transformer is equipped with an internal circuit protector. If the circuit protector trips, unplug the power cord from the
electrical wall outlet, check your layout for any short circuits. The circuit breaker will reset automatically when the short is
removed from the circuit.
l
Unplug the transformer from the electrical wall outlet when not in use.
l
Do not use this transformer for other than its intended purpose.
Transformer Ratings:
Input: 120 VAC, 60 Hz Only, Output: 21VAC, 3.75A 78VA
2
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
Set Up Checklist
r
r
r
r
r
r
r
Assemble RealTraxВ®
Connect the transformer
Lubricate the engine
Prime the Smoke Unit
Place the engine and cars on the track and couple them together
Position remote lock-on lens
Apply power to run as described in the Basic Operation section of
these instructions.
Set Includes
8-Pieces
O-31 Curve RealTrax
Steam Engine with Loco-Soundв„ў
Steam Tender
Remote Control
3 Freight Cars
Video
Lock-On
Caboose
Transformer
CD-Rom
Tools Needed
Pliers
Philips Screwdriver
Scissors
Cotton Swab or Rag
RailKing Maintenance Kit or
Light Household Oil and Bearing Grease
Optional Equipment
Microphone w/1/8” Plug
1/8” Male to Male Plug
Cassette Player
and Tape
You can obtain replacement parts and replacement instructions from the
M.T.H. Parts Department
e-mail: [email protected]
phone: 410-381-2580
mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
3
Getting Started
В®
Assembling RealTrax
The quick connectors and built-in roadbed allow you to set up RealTrax anywhere,
including carpeted surfaces.
STEP
1
Knock-out must be removed
before remote lock-on can
be installed
STEP
2
Remove knock-out from
outer edge of track by
holding and twisting up
with a pair of pliers
STEP
3
Insert lock-on into
knock-out tab
(Lock-on is the interface between
the track and transformer)
REMOVE TAB
FROM OUTER EDGE
STEP
4
Make sure the metal
contacts line up.
STEP
5
Align Quick
Connect Plugs
STEP
6
Gently push together RealTrax
Connecting
Track Clips
If you prefer not to screw
your track to the table for
a permanent layout, use
the enclosed track clips
on adjoining curved
RealTrax sections to
secure them in place.
STEP
1
Line up the track clip
STEP
2
Pop track clip in place.
Connecting the Transformer
The 75-watt power supply included with this set provides an
easy-to-use, safe power source for AC-powered trains and
accessories.
!
Plug the wire from the transformer into the remote
lock-on's center port, then plug the transformer into
the wall outlet.
!
Unplug when not in use.
4
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
Lubricating the Engine
Lubricate all exposed moving parts before operating using a multi-purpose,
plastic-compatible oil (available with M.T.H.'s Maintenance Kit, sold
separately) or a light household oil. Follow the lubrication points.
Lubricate Valve Gear
Lubricate Pick-Up Rollers
(Do Not Oil the Flat Part of
Pick-Up Rollers)
DO NOT
OVER OIL
Lubricate Side Rods
Priming the Smoke Unit
Add 15-20 Drops
Smoke Fluid
You should prime the smoke unit with smoke fluid before
operating. Add 15-20 drops of smoke fluid from the
included pipette through the smokestack, then gently blow
into the stack to eliminate any air bubbles in the fluid.
If you choose not to prime the unit with fluid, turn the
smoke unit switch located under the tender to the OFF
position. Running the engine without a primed smoke
unit may cause damage. See the "ProtoSmoke Unit
Operation" section of this book for more information
on smoke unit maintenance.
Running the engine without a primed
smoke unit may cause damage
Smoke Unit
ON/OFF Switch
Coupling the Engine and Cars
STEP
1
Position
armiture
for proper
operation
Incorrect
Position
STEP
2
Place the engine and cars
on the track.
Open couplers by
pressing down on plunger.
STEP
3
Push cars together to
couple.
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
5
DO NOT CONNECT
This Engine To A
Tender From
Another Engine; It May
Cause Serious Damage.
CABLE CURVES
UPWARD
! Plug tender plug into boiler socket at the back of cab.
! Connect the draw bar between the engine and tender.
Look at the bottom of the
engine and tender where
each will have a color-coded
stamp. If they match you
may connect those two
pieces; if not, don't.
Remote Control
The remote and lock-on are designed for use with moderate power supplies such as the
one included with this set. It is compatible with virtually any manufacturer's engines.
STEP
STEP
1
STEP Aim remote control at the
2
3
rounded side of the lock-on
sensor to send track. Lockon sensor can be rotated to the
direction you will most often
signal.
Remove phillips screw with
screwdriver on back of remote.
Insert two AA batteries (not
included) into the remote.
STEP
STEP
4
Green LED flashing
indicates lock-on is
receiving signals from
remote.
5
Controls trains from
up to 15 feet from
the lock-on.
Note: The RailKingВ® Remote Control and Remote Lock-on will not operate engines
equipped with pre-1997 versions of Proto-SoundВ® or with Proto-One,в„ў Proto-Plus,в„ў
Proto-Deluxe,в„ў aftermarket systems.
6
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
Basic Operation
Operation Buttons
Throttle Up Throttle up the power to your track by pressing the top end of the Throttle
Control Rocker Switch firmly for about 5 seconds, until the engine's headlight and
lighted cars burn bright. Then put the engine into motion by firmly pressing the
Direction button (hold it for approximately 1 second) on your remote once. If the engine
does not begin to move as soon as you firmly press the Direction button, you may not
have sent enough voltage to the track to make the train move. Press the throttle up for a
few more seconds until the train begins to move.
To increase or decrease track voltage, and therefore train speed, press the throttle control
rocker switch. Pressing the top end of the throttle will increase voltage and speed.
Pressing the bottom end of the throttle will decrease voltage and speed.
The engine will maintain the speed you set after you release the throttle until you press it
again to change the voltage and speed.
Bell - To sound the bell, firmly
press and release the Bell
button. To turn the bell off,
press and release the Bell button
again. The bell will continue to
ring from the time you turn it on
until you press and release the
button again to turn it off.
Horn/Whistle - To sound the
whistle, firmly press the
Horn/Whistle button. The
whistle will sound for as long as
you continue to depress the
button. It will stop when you
release the button.
Throttle
Emergency Stop Press the
Emergency Stop button and all
trains on the track controlled by
the remote will stop until you
reapply voltage. This is an easy
way to shut down your trains at
the end of a session or to stop
suddenly if the train's path
becomes obstructed.
Direction Your train is
programmed to start in neutral.
The train will always cycle
neutral-forward-neutral-reverse
with each press and release of the
direction button. The engine is
programmed to restart in neutral
each time the track voltage is
turned off for 25 seconds or more.
Cycle Phases
CAUTION: Do not mix old and
new batteries. Do not mix
alkaline, standard (carbon-zinc),
or rechargeable (nickelcadnium) batteries.
Neutral
Reverse
Forward
Neutral
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
7
Speed Control
M.T.H. engines equipped with Loco-Sound have speed control capabilities that allow the
engine to maintain a constant speed up and down grades and around curves, much like an
automobile cruise control. You can add or drop cars on the run, and the engine will
maintain the speed you set.
While the engine is programmed to start with the speed control feature activated, you can
opt to turn it off. This means the engine's speed will fall as it labors up a hill and increase
as it travels downward. It is also affected by the addition or releasing of cars while on the
run. To maintain a constant speed when speed control is turned off, you need to adjust
track voltage yourself.
To turn speed control on and off, put the engine in neutral, then quickly tap the
transformer's Whistle button one time then quickly tap the Bell button two times, allowing
approximately ВЅ second to lapse between each quick button press. Repeat the 1 whistle, 2
bells code to return it to the other condition. You will want to do this during the initial
neutral upon start-up if you ever couple this engine to another engine that is not
equipped with speed control to avoid damaging the motors in either engine. Each
time you shut down the engine completely, it will automatically turn speed control on.
Timing Chart
Press
Whistle
Short &
Firm
Place
Engine into
Neutral
Press
ВЅ Sec.
Bell
Pause
Short &
Firm
Total Time Lapse: 1 ВЅ Seconds
ВЅ Sec.
Pause
Whistle
Bell
Bell
=
Press
Bell
Short &
Firm
Speed Control
Repeat to Return
to Normal Condition
Direction Lock
You can lock your engine into a direction (forward, neutral, or reverse) so that it will not
change directions. To do this, put the engine into the direction you want or into neutral, to
lock it into neutral, run it at a very slow crawl (as slowly as it will move without halting),
and quickly but firmly tap the Whistle button once followed by three quick taps of the
Bell button, allowing approximately ВЅ second to lapse between each quick button press.
The engine will not change direction (including going into neutral) until you repeat the 1
whistle, 3 bells code to return the engine to its normal condition, even if the engine is kept
without power for extended periods of time.
Place
Engine into
Desired
Direction
8
Whistle
Bell
Bell
Bell
=
Direction Lock
Repeat to Return
to Normal Condition
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
Proto-Cast and Proto-Dispatch:
When used with the remote lock-on included in this set, Loco-Sound equipped engines
gain Proto-Castв„ў and Proto-Dispatchв„ў features.
Proto-Cast:
Allows you to play audio recordings through your engine's speakers.
You must supply the audio source (a small portable CD/tape player is
sufficient) and a male-to-male mini cable (1/8" plug, like that used for
the headset with a portable CD/tape player) to connect your audio
source to the remote lock-on.
To use Proto-Cast
! Plug the mini-cable first into your audio source (usually into the headphone jack)
! Plug Cable into the "Audio" port on the right side of the remote lock-on.
! Adjust the volume. If engine sounds keep breaking through the recorded sounds,
increase the volume on the audio source.
1/8" plug
+
Proto-Cast
=
+
Proto-Dispatch
Proto-Cast
Proto-Dispatch: This feature allows you to broadcast your own voice through your
engine's speakers. You must supply the microphone and a mini cable
(1/8” plug, like that used for the headset with a portable CD/tape
player) to connect your microphone to the remote lock-on.
To use Proto-Dispatch
! Mini-cable attached to the microphone must be an 1/8” plug.
! Plug the ”Mic" into the proto-dispatch port on the left side of the remote lock-on and
speak into the microphone.
1/8" plug
Proto-Dispatch
+
Proto-Dispatch
=
Proto-Dispatch
When these features are in use, the locomotive's own sounds (engine sounds and bells,
whistles, and horns) will be muted so that only the sounds you broadcast will be heard.
Because these two features are voice activated, there will be a several second delay after
you stop speaking into the microphone or turn off the audio source before the engine
sounds resume. To stop using the feature and return to normal operation, unplug the cable
from the lock-on jack.
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
9
If using parallel tracks with multiple Loco-Sound equipped engines, Proto-Cast and
Proto-Dispatch transmissions from one track may be picked up by the other nearby
engines.
If you experience popping and interference when using Proto-Cast or Proto-Dispatch, try
cleaning the track with denatured alcohol as described in the "Cleaning the Wheels, Tires
and Track" section of this booklet.
NOTE: M.T.H. does not recommend using Proto-Cast
and Proto-Dispatch at the same time.
Manual Volume Control
To adjust the volume of all sounds made by this
engine, turn the master volume control knob
located under the tender clockwise to increase the
volume and counter-clockwise to decrease the
volume.
10
increase
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
Maintenance
Care of the Remote Control
To ensure trouble-free operation:
!
Do not drop the remote. It can damage the delicate electronics inside.
!
Remove batteries before storing for extended periods.
!
Any attempt by anyone other than an authorized M.T.H. repair person to open and
repair the handheld transmitter or lock-on may result in damage and the loss of
warranty protection.
!
If your train responds inconsistently, replace old batteries with fresh ones. Do not
mix old and new batteries.
Lubrication Instructions
The engine should be oiled and greased in order to run properly.
Regularly lubricate all side rods and linkage components and pickup rollers
to prevent squeaking. Use light household oil, such as that found in
M.T.H.'s maintenance kit. Do not over oil. Use only a drop or two on each
pivot point.
Lubricate Valve Gear
Lubricate Pick-Up Rollers
(Do Not Oil the Flat Part of
Pick-Up Rollers)
DO NOT
OVER OIL
Lubricate Side Rods
Greasing Instructions
The locomotive's internal gearing was greased at the factory. Grease engine every 50
hours of use or one year. Use a lithium based grease and follow the greasing instructions.
SE
EA
GR
!
Remove the screw from the chassis to open
the grease port.
!
Insert the grease tube tip into the port and
squeeze the tube once or twice to add grease
to the gearbox.
!
Wipe off any excess grease and replace the
phillips screw securely.
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
11
Cleaning the Wheels, Tires and Track
Periodically check the locomotive wheels and pickups
for dirt and buildup, which can cause poor electrical
contact and traction and prematurely wear out the
neoprene traction tires. Wheels and tires can be cleaned
using denatured (not rubbing) alcohol applied with a
cotton swab.
To clean the track, use RailKing Track Cleaning Fluid
and a clean rag or denatured (not rubbing) alcohol. Unplug the transformer and wipe the
rails of the track, turning the rag frequently to ensure that you are using clean cloth on the
rails. Because the manufacturing process leaves a coating on RealTrax center rail, you
should clean the rails after the first 30 minutes of use (you may notice an electrical smell
during initial use as the coating wears off; this is normal). Thereafter, keep an eye on the
track and clean it when it gets dirty to ensure good electrical contact and to lengthen the
life of the tires.
Traction Tire Replacement Instructions
Your locomotive is equipped with two neoprene rubber traction tires on the rear set of
flanged drivers. While these tires are extremely durable, you may need to replace them at
some point.
STEP
1
! Remove the side rods (the rods that connect each drive wheel to the other) from
the wheels in order to slip the new tire over the grooved drive wheel. These bolts
can be loosened with a 5mm nutdriver.
! Clean the groove using a cotton swab and denatured alcohol.
STEP
2
! Make sure the old tire has been completely removed from the groove in the drive
wheel, using a razor blade or small flathead screwdriver to pry away any remains.
! Clean the groove using a cotton swab and denatured alcohol.
! Slip the new tire onto the wheel. You may find it useful to use two small flathead
screwdrivers to stretch the tire over the wheel.
! If you twist the tire while stretching it over the wheel, you will need to remove and
reinstall the tire. Otherwise your engine will wobble while operating.
! Make sure the tire is fully seated inside the groove. Use a razor blade to trim away
any excess tire that doesn't seat itself inside the groove properly.
ProtoSmokeВ® Unit Operation
This steam locomotive contains a smoke unit that outputs smoke through the smokestack
on the boiler of the engine. The smoke unit is essentially a small heating element and
wick that soaks up and then heats a mineral oil-based fluid that emits a harmless smoke.
The smoke is then forced out of the stack by a small electric fan.
With a few easy maintenance steps, you should enjoy trouble-free smoke unit operation
for years.
!
12
When preparing to run this engine, add 15-20 drops of smoke fluid through the
smokestack. We recommend M.T.H. ProtoSmoke, Seuthe, LGB, or LVTS fluids (a
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
small pipette of ProtoSmoke fluid is included). Do
not overfill the unit or the fluid may leak out and coat
the interior engine components.
If you choose not to add the fluid (or have already
added the fluid but choose to run smoke-free), turn off
the smoke unit switch located under the tender body.
Failure either to add fluid to the unit or to turn it
off may damage the smoke unit heating element
and/or wicking material.
!
Add
Add 15-20
15-20 Drops
Drops
Smoke
Smoke Fluid
Fluid
Running the engine without a primed
smoke unit may cause damage
!
!
!
When the smoke output while running the engine
begins to diminish, add another 10-15 drops of smoke
fluid or turn the smoke unit off.
When storing the unit for long periods of time,
you may want to add about 15 drops of fluid to
prevent the wick from drying out.
After removing the engine from storage, add
another 25 drops of fluid, letting the wick soak
up the fluid for 15 minutes prior to operation.
If you experience poor or no smoke output when the smoke
unit is on and has fluid, check the wick to see if it has
become hard, blackened, and unabsorbent around the
heating element. Remove the boiler as shown below.
Remove the smoke unit inspection cover from the
locomotive's body (see right). After removing the chassis
and inspection cover screws, lift the inspection plate away
and inspect the wick. If it is darkly discolored and hard, it
should be replaced. When priming new wick add 40 drops.
Smoke Unit
ON/OFF Switch
Smoke Unit Cover
Wick in
Poor
Condition
Wick in
Good
Condition
Locomotive Light Bulb Replacement
To replace the light bulb in the locomotive, follow the boiler removal instructions below.
STEP
1
Remove the four Phillips screws from the chassis then lift the body away from the chassis.
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
13
STEP
1
Once the locomotive boiler has been removed
from its chassis, locate the bulb bracket as seen in
the illustration on the right and rotate the
headlight bulb counter-clockwise to remove.
Replace Headlight Bulb
Caboose Light Bulb Replacement
To replace the interior light bulbs follow these instructions and see the diagrams below.
STEP
STEP
1
2
Remove the four (4) screws located under
the caboose's trucks.
Lower the chassis from the shell, taking
care not to pull the wires out.
STEP
3
Replace a Bayonet Bulb by turning and pushing up,
pulling the bulb from its socket.
Bayonet Bulb
(Part #CI-0000015)
1
2
14
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
Quick-Start Video
The included VHS Quick-Start video demonstrates the start-up and basic operation of this
set as well as other information about model railroading. You may find it helpful to view
the video before operating this set.
RailWare Interactive CD ROM
M.T.H. provides a free RailWare CD ROM in each Ready-To-Run set. It is full of
helpful information on M.T.H. product history, track planning software, a dealer finder,
and information and video clips on Loco-Sound and Proto-Sound 2.0. Follow the
directions below to use the CD ROM.
Minimum System Requirements: Pentium 100, 16MB RAM, Windows 95 or later, CD
ROM drive, Sound Card, display properties set to greater than 256 colors. The CD will
not work on a Mac OS unless you run VirtualPCВ®.
Running RR-Track Software
You may run the RR-Track software directly off of the CD ROM or you may install the
software to your hard drive.
1. On the Desktop, click on the icon that says My Computer.
2. Find your CD ROM drive.
3. With the M.T.H. CD ROM in the drive, double click on the icon for the CD ROM
drive.
4. Find the folder on the CD ROM entitled INSTALLATION.
5. Choose the folder inside entitled RRTRAXSETUP.
6. Run the file in that folder called SETUP.EXE and follow the directions it provides.
The program may ask you for a registration code. If it does type in "M.T.H." and it will
run.
Additional track libraries can be obtained directly from RR-Track. See their website for
more information www.rrtrack.com.
Installing Adobe Acrobat Software
To read some of the electronic documents included on the CD ROM, you will need to
install the Adobe Acrobat ReaderВ® if it is not already on your computer. To install the
software:
1. On the Desktop, click on the icon that says My Computer.
2. Find your CD ROM drive.
3. With the MTH CD ROM in the drive, double click on the icon for the CD ROM
drive.
4. Find the folder on the CD ROM entitled INSTALLATION.
5. Choose the folder inside entitled ACROBAT READER.
*If you are running Windows 95, 98 or NT choose the folder 32 BIT. Run the file
AR32E301.EXE and follow the directions it provides.
If you have problems you cannot resolve by using these directions, contact
[email protected] or call 410-381-2580 for further help.
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
15
Troubleshooting Loco-Sound в„ў Problems
Although Loco-Sound has been designed and engineered for ease of use, you may have
some questions during initial operation. The following table should answer most
questions. If your problem cannot be resolved with this table, contact M.T.H. for
assistance (e-mail: [email protected]; telephone: 410-381-2580;
fax: 410-423-0009; mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532).
Starting Up
Remedy
When I first turn the power on, the This is normal behavior. To prevent accidental high-speed
engine will not begin to run.
start-ups, Loco-Sound is programmed to start up in neutral
anytime track power has been turned off for several seconds.
See the "Basic Operation" section for more details.
The engine will not start after I press You may not be sending enough power to the track to power
the engine. Press the throttle up for a few more seconds to
the Direction button.
increase track power.
Whistle
Remedy
I can't get the whistle to blow when I You may be pressing the button too quickly. Try pressing
press the whistle button.
the whistle button more slowly, taking approximately one
full second to fully depress the button.
Bell
Remedy
I can't get the bell to ring when I press You may be pressing the button too quickly. Try pressing
the bell button more slowly, taking approximately one full
the bell button.
second to fully depress the button.
Lock-out
Remedy
I can't get the engine to run after I
power up the transformer. It sits still
with the engine sounds running.
The engine won't lock into forward,
neutral, or reverse.
Volume
The engine may be locked into the neutral position. Follow
the procedure in the "Lock into a Direction" section to
unlock the engine's direction.
Engine speed must be below 10 scale mph (approx. 10 volts
or less in conventional mode).
Remedy
The sounds seem distorted,
especially when the Horn or bell is
activated.
No sound.
Proto-Cast and -Dispatch
Loco-Sound volume is set too high. Turn the volume
control knob on the bottom of the chassis counter-clockwise
to reduce the volume.
Volume is set too low, adjust volume control knob on the
bottom of the chassis clockwise to increase the volume or
check connector to speaker.
Remedy
When I try to play music or my
voice through my engine's speakers,
there is popping and interference.
My Proto-Cast sounds play too
quietly or unclearly.
Clean the track with denatured alcohol, as described in the
"Cleaning the Wheels, Tires, and Track" section of this
book.
Unplug the cable between the audio source and the remote
lock-on. Re-plug it into the audio source first, then into the
lock-on, pushing firmly to make sure it is fully installed.
Your recording may be playing too quietly to trigger the
When I try to play Proto-Cast, the
engine's sounds keep breaking in on engine to stop playing its own sound set. Turn up the
volume of the audio source you are using.
my recording.
This is normal behavior. Because Loco-Sound uses radio
When I run two Loco-Sound
waves to transmit the sound to the engine, other Locoengines on tracks near each other,
the Proto-Cast and Dispatch sounds Sound engines in the same range will also pick up the
sound. Try moving one of the sets.
play from both engines, not just
from the one connected to the audio
source or microphone.
16
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
Compatibility
While this Ready-To-Run set is equipped with everything you need to operate it, the
design allows flexibility. The train will operate on any traditional O-31 or larger O Gauge
track system, including the RealTraxВ® included with this set or traditional tubular track. It
is also compatible with most standard AC transformers, including the hobby transformer
packaged with your set.
Transformer Compatibility and Wiring Chart
Note that many of the operational commands described in these instructions require a bell
button, so if you are using a transformer other than the one included in this set and your
transformer does not have its own bell button, you should consider adding one to get the
full benefit of the system.
Transformer
Model
Center Rail
Outside Rail
Min/Max.
Voltage
Power
Rating
Transformer
Type
MTH Z-500
Red Terminal
Black Terminal
0-18v
50-Watt
Electronic
MTH Z-750
Red Terminal
Black Terminal
0-21v
75-Watt
Electronic
MTH Z-4000
Red Terminal
Black Terminal
0-22v
390-Watt
Electronic
Lionel 1032
U
A
5-16v
90-Watt
Standard
Lionel 1032M
U
A
5-16v
90-Watt
Standard
Lionel 1033
U
A
5-16v
90-Watt
Standard
Lionel 1043
U
A
5-16v
90-Watt
Standard
Lionel 1043M
U
A
5-16v
90-Watt
Standard
Lionel 1044
U
A
5-16v
90-Watt
Standard
Lionel 1053
U
A
8-17v
60-Watt
Standard
Lionel 1063
U
A
8-17v
60-Watt
Standard
All-Trol
Left Terminal
Right Terminal
0-24v
300-Watt
Electronic
Dallee Hostler
Left Terminal
Right Terminal
Lionel LW
A
U
8-18v
75-Watt
Standard
Lionel KW
A or B
U
6-20v
190-Watt
Standard
Lionel MW
Outside Track
Terminal
Inside Track
Terminal
5-16v
50V.A.
Electronic
Lionel RS-1
Red Terminal
Black Terminal
0-18v
50V.A.
Electronic
Lionel RW
U
A
9-19v
110-Watt
Standard
Lionel SW
U
A
Unknown
130-Watt
Standard
Lionel TW
U
A
8-18v
175-Watt
Standard
Lionel ZW
A,B,C or D
U
8-20v
275-Watt
Standard
Lionel Post-War
Celebration
Series ZW
A,B,C or D
Common
0-20v
135/190 Watt
Electronic
Electronic
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
17
4-6-0 Steam Locomotive Engine Parts
Name and Number
1.) Shell ( black )( boiler )
( Christmas )( # 1225 )
2.) Bell ( nickel )
3.) Handrail ( nickel )( boiler )
( right )( 150.0mm long )( bends down 13.4mm )
4.) Handrail ( nickel )( boiler )
( left )( 150.0mm long )( bends down 13.4mm )
5.) Stanchion ( black )
( plastic )( 3.0mm long )
6.) Lens ( green )( marker light )
7.) Lens ( clear )( headlight )
8.) Wire nut ( yellow )
9.) Smoke unit
( Proto-Sound 2.0В® & Loco-SoundВ® )
10.) Bulb ( clear )( headlight )
( 6v )( small globe )( screw base )
11.) Bracket ( black )
( headlight / smoke unit )( metal )( angled )
12.) Screw
( 4/40x6.0mm )( roundhead )
13.) Insulator ( black )
( top )( square )( pick-up )
14.) Screw ( nickel )
( M3x6.0mm )( roundhead )
15.) Screw ( yellow Zinc )
( M2.5x6.0mm )( roundhead w/ lock washer )
16.) Motor mount ( black )
17.) Screw
( 6/32x8.0mm )( roundhead )
18.) Motor ( RS-365SH )
( 8.0x29.0mm worm gear )( 14.5mm long threads )
( 9.0x30.0mm white flywheel w/ black stripes )
( w/ black plastic tach board mounting strap )
19.) Ferrite bead ( grey )
( 4.6x9.7x9.4mm )( barrel shape )
20.) Tach board
( has small resister on backside of tach board )
21.) Screw
( 6/32x6.0mm )( roundhead )
22.) PC board ( green )
( 10 pin female plug )( 20.5x24.2mm )
( w/ out 2-IN4004 diodes )
23.) Draw bar ( black )
( 67.5mm long )
18
Part #
FB-1200264
FB-1200101
FB-1210042
FB-1220049
FB-1200242
FA-1230021
FA-1230022
BI-4500003
AA-0000029
CA-0000038
IH-0000174
IA-0000003
BD-0000026
IA-0000015
IA-0000089
BI-0000034
IA-0000050
BE-0000079
AI-0000030
AG-0000048
IA-0000027
AG-0000045
FB-1200079
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
24.) Spring ( nickel )
( 6.5x10.0mm )( w/ 0.6mm thick wire )
25.) Screw
( 6/32x6.0mm )( washer head )
26.) Traction tire
27.) Side rod ( nickel )
( 94.0mm long )( 3 bolt holes )
28.) Drive rod ( nickel )
( 74.5mm long )( 7.0mm step )
29.) Crosshead ( nickel )
( 38.8mm long )
30.) Bolt ( nickel )( M3x9.4mm )
( 4.0x2.5mm shoulder )( 5.0mm hex head )
31.) Nut ( nickel )
( 2.5x5.0x10.0mm )
32.) Insulator ( black )
( pick-up )( bottom )( plastic )
33.) Pick-up
( 8.0x11.0mm roller )( 28.0mm long )
34.) Crosshead guide assembly
( nickel )( 2 crosshead guides connected together )
35.) Spacer ( black )( cupped )
( 3.5x15.0x2.5mm )( metal )
36.) Truck ( black )
( lead )( 2 axle )( boiler )
37.) Bracket ( black )( lead truck )
38.) Screw
( 4/40x4.0mm )( roundhead )
39.) E-clip
( 2.5x6.0x0.5mm )
40.) Bracket ( black )( lead truck )
( 38.9mm long )( 4.5mm step )
41.) Pin ( black )
( 3.0x14.8mm )( 6.3mm rounded head )
( 1 e-clip groove 0.5mm out from end )
42.) Drive block ( black )( 3 axle )
43.) Capacitor ( blue )( .01 uF )
( 16.0x2.0mm )( 2 wire leads )
44.) Washer ( black )
( 3.0x6.0x0.4mm )( fiber )
45.) Screw
( 6/32x4.0mm )( roundhead )
NS.) Wire harness
( female 10 pin PC board )
IE-0000061
IA-0000214
DE-0000023
EC-1250026
EC-1250027
EC-1250016
IA-0000253
IC-0000005
BD-0000001
BD-0000048
EA-1200016
ID-0000014
DA-1230015
IH-0000076
IA-0000021
IF-0000004
IH-0000175
IG-0000037
DF-1200040
AI-0000031
ID-0000040
IA-0000060
BC-1200120
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
19
4-6-0 Steam Locomotive Engine Parts
1
2
5
3
4
5
6
8
20
18
21
17
9
19
7
10
22
43
16
11
15
23
30
12
12
14
13
24
29
27
28
25
26
41
26
42
38
24
27
40
17
37
44
25
39
17
28
45
29
35
30
36
25
31
34
12
32
33
14
20
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
4-6-0 Steam Tender Parts
Name and Number
1.) Shell ( black )
( tender )( Christmas Express )( plastic )
2.) Screw ( M3x6.0mm )( roundhead )
3.) Speaker cone ( black )
( 44.0x48.3x23.0mm )( 2 screw hole tabs )( plastic )
4.) Speaker
( Cuistack )( GF0501, 8 ohms, 0.25 watt )
5.) Gasket ( black )
( speaker ring )( 43.8x49.8x3.0mm )( foam )
6.) Wire harness
( black male 10 pin plug )
7.) Chassis ( black )( tender )
( has holes for battery charger jack )
8.) Screw ( 4/40x6.0mm )( roundhead )
9.) Insulator washer ( white )
( 6.0x4.0x2.5mm )( plastic )
10.) Insulator ( clear )
( 13.0x19.0x0.1mm )( single hole )
11.) Board ( Loco-Soundв„ў )
12.) Wire nut ( yellow )
13.) Bracket ( Aluminum )
( for Loco-Soundв„ў board )
14.) Screw ( M3x4.0mm )( roundhead )
15.) Screw ( M3x8.0mm )( roundhead )
16.) Volume pot ( small )( blue )
17.) Spacer ( black )
( 3.0x6.0x4.0mm )( plastic )
18.) Switch ( small )
19.) Screw ( M2x4.0mm )( roundhead )
20.) T-bar ( black ) ( 4.0x20.0mm )( plastic )
21.) Coupler ( black ) ( mechanical )( 51.5mm long )
22.) Armature ( black ) ( 45.0mm long )
23.) Spring ( 6.5x11.0mm )( w/ 0.4mm thick wire )
24.) Washer ( black )( plastic )
( 4.6x8.6x2.0mm )( inside 7.0x1.0mm )( cup shaped )
25.) E-clip ( 3.0x8.0x0.5mm )
26.) Screw
( M3x16.0mm )( washer head )( self-drilling threads )
27.) Screw ( 6/32x6.0mm )( washer head )
28.) Truck ( black ) ( 2 axle )( leading/trailing )( tender )
NS.) Wire harness ( black male 12 pin plug )
Part #
GA-1200106
IA-0000016
BF-0000016
BF-0000015
IB-0000009
BC-1200121
GB-1200052
IA-0000003
ID-0000033
ID-0000024
AE-0000003
BI-4500003
IH-0000266
IA-0000010
IA-0000035
BI-0000040
ID-0000071
BB-0000009
IA-0000058
IG-0000001
DD-0000039
DD-0000040
IE-0000007
ID-0000060
IF-0000002
IA-0000025
IA-0000214
DA-1250007
BC-1200122
RailKing 4-6-0 Steam Freight Set with Loco-Soundв„ў
21
4-6-0 Steam Tender Parts
1
2
12
11
3
10
8
9
4
13
14
8
5
18
20
15
16
21
19
6
17
22
23
24
7
26
26
27
28
8
25
Service & Warranty Information
How to Get Service Under the Terms of the Limited One-Year Warranty
When you suspect an item is defective, please check the operator's manual for standard operation and
trouble-shooting techniques that may correct the problem. Additional information may be found on the
M.T.H. Website. Should you still require service, follow the instructions below to obtain warranty
service.
First, e-mail, write, call or fax a M.T.H. Authorized Service Center (ASC) in your area to obtain Repair
Authorization. You can find the list of ASCs on the M.T.H. Website, www.mth-railking.com.
Authorized Service Centers are required to make warranty repairs on items sold only from that store;
all other repairs may-- or may not be done at the store's own discretion. If you did not purchase the
item directly from the ASC, you will need to select a National Authorized Service Center (NASC).
These centers are compensated by M.T.H. to perform warranty service for any customer whose repair
qualifies for warranty service. A list of NASC retailers can be located on the M.T.H. Website or by
calling 1-888-640-3700. Should the warranty no longer apply, you may choose either an ASC or
NASC retailer to service your M.T.H. Product. A reasonable service fee will be charged.
CAUTION: Make sure the product is packed in its original factory packaging including its foam and
plastic wrapping material to prevent damage to the merchandise. There is no need to return the entire
set if only one of the components is in need of repair unless otherwise instructed by the Service Center.
The shipment must be prepaid and we recommend that it be insured. A cover letter including your
name, address, daytime phone number, e-mail address (if available), Return Authorization number
(if required by the service center, a copy of your sales receipt and a full description of the problem
must be included to facilitate the repairs. Please include the description regardless of whether you
discussed the problem with a service technician when contacting the Service Center for your Return
Authorization.
Please make sure you have followed the instructions carefully before returning any merchandise for
service. Authorized M.T.H. Service Centers are independently owned and operated and are not agents
or representatives of M.T.H. Electric Trains. M.T.H. assumes no responsibility, financial or otherwise,
for material left in their possession, or work done, by privately owned M.T.H. Authorized Service
Centers.
If you need assistance at any time email MTH Service at [email protected], or call 410 3812580.
Limited One-Year Warranty
All M.T.H. products purchased from an Authorized M.T.H. Train Merchant are covered by this warranty.
See our website at www.mth-railking.com or call 1-888-640-3700 to identify an Authorized M.T.H. Train Merchant
near you.
M.T.H. products are warrantied for one year from the date of purchase against defects in material or workmanship,
excluding wear items such as light bulbs, pick-up rollers, batteries, smoke unit wicks, and traction tires. We will
repair or replace (at our option) the defective part without charge for the parts or labor, if the item is returned to an
M.T.H. Authorized Service Center (ASC) or M.T.H. National Authorized Service Center (NASC) within one year of
the original date of purchase. This warranty does not cover damages caused by improper care, handling, or use.
Transportation costs incurred by the customer are not covered under this warranty.
Items sent for repair must be accompanied by a return authorization number, a description of the problem, and a copy
of the original sales receipt from an Authorized M.T.H. Train Merchant, which gives the date of purchase. If you
are sending this product to an Authorized Service Center, contact that Center for their return authorization.
This warranty gives you specific legal rights, and you may have other rights that vary from state to state. Specific
questions regarding the warranty may be forwarded to M.T.H. directly.
Service Department
M.T.H. Electric Trains
7020 Columbia Gateway Drive
В© 2001 M.T.H. Electric Trains, 7020 Columbia Gateway Drive, Columbia Maryland 21046-1532.
www.railking.com
AUTHORIZED SERVICE CENTER
7020 Columbia Gateway Dr. - Columbia, MD 21046
Information: 410-381-2580 Fax: 410-381-6122
www.mth-railking.com
PARTICIPATING N.A.S.C.
RETAILER LIST
CANADA
TOY TRAIN WORKSHOP
CUMBERLAND
613-833-8331
THE TRAIN ROOM
FERGUS
519-787-3280
CALIFORNIA
TIN PLATE JUNCTION
OAKLAND
510-444-4780
COLORADO
MIZELL TRAINS INC
WESTMINSTER
303-429-4811
CONNECTICUT
NEW ENGLAND HOBBY
SUPPLY
MANCHESTER
860-646-0610
FLORIDA
ROUNDHOUSE SOUTH
PORT ORANGE
386-304-7002
MARYLAND
CATOCTIN MOUNTAIN TRAINS
& HOBBIES
THURMONT
301-694-8331
MICHIGAN
MICHIGAN MODEL TRAIN
CENTER
PINCKNEY
734-426-1651
BRASSEUR ELECTRIC TRAINS
INC.
SAGINAW
989-793-4753
NEW HAMPSHIRE
TREASURED TOYS
SALEM
603-898-7224
NEW YORK
AURORA RAILS & HOBBIES
EAST AURORA
716-652-5718
OHIO
DAVIS ELECTRONICS
MILFORD
513-831-6425
PLAZA HOBBY
CUMBERLAND
301-729-6424
RICK'S TOY TRAINS
TOLEDO
419-478-0171
ENGINE HOUSE HOBBIES
GAITHERSBURG
301-590-0816
PENNSYLVANIA
BUSSINGER TRAINS
AMBLER
215-628-2366
FAIRCHANCE PHARMACY
FAIRCHANCE
724-564-7817
TOBY TYLER'S HOBBY
CENTER
PITTSBURGH
412-653-5030
VIRGINIA
LOCUST GROVE TRAINS
LOCUST GROVE
540-854-8955
DAVIS HOBBY SUPPLIES
PORTSMOUTH
757-397-1983
T S G HOBBIES
WARRENTON
540-347-9212
WISCONSIN
SOMMERFELD'S TRAINS
BUTLER
262-783-7797
GRAMPA'S TRAIN SHOP
RICE LAKE
715-234-2996
AUTHORIZED SERVICE CENTER
7020 Columbia Gateway Dr. - Columbia, MD 21046
Information: 410-381-2580 Fax: 410-381-6122
www.mth-railking.com
PARTICIPATING A.S.C. RETAILER LIST
CANADA
TOY TRAIN WORKSHOP
CUMBERLAND
613-833-8331
THE TRAIN ROOM
ERGUS
519-787-3280
CREDIT VALLEY RAILWAY
COMPANY
STREETSVILLE
905-826-1306
B H TRAINS
TERREBONNE
450-492-0317
ALABAMA
SOUTHERLAND STATION
HUNTSVILLE
256-533-4720
LIL' BOBBY'S HOBBIES
MONTGOMERY
334-277-1715
ARIZONA
ARIZONA TRAIN DEPOT
MESA
480-833-9486
CALIFORNIA
CENTRAL COAST TRAINS
ATASCEDERO
805-466-1391
TRAIN SHACK
BURBANK
818-842-3330
ROUNDHOUSE
NORTH HOLLYWOOD
818-769-0403
DOLLHOUSES TRAINS & MORE
NOVATO
415-883-0388
FRANK'S TRAINS & HOBBIES
OLDSMAR
813-855-1041
TIN PLATE JUNCTION
OAKLAND
510-444-4780
COLONIAL PHOTO & HOBBY
ORLANDO
407-841-1485
RON'S WORLD
SAN CLEMENTE
949-361-5596
WARRICK CUSTOM HOBBIES
PLANTATION
954-370-0708
TRUCKS & TRAINS HOBBIES
SANTA ROSA
707-537-6586
ROUNDHOUSE SOUTH
PORT ORANGE
386-304-7002
COLORADO
ILLINOIS
CUSTOM RAILWAY SUPPLY
COLORADO SPRINGS
719-634-4616
BIKE & CHOO CHOO
CONNECTION
SCHAUMBURG
847-882-7728
CABOOSE HOBBIES
DENVER
303-777-6766
MIZELL TRAINS
WESTMINSTER
303-429-4811
CONNECTICUT
NEW ENGLAND HOBBY
SUPPLY
MANCHESTER
860-646-0610
INDIANA
Y. O. R. K. TRAINS
MUNSTER
219-838-9999
SAMUELSON'S TRAIN SHOP
VALPARAISO
219-462-2708
IOWA
CABOOSE STOP HOBBIES
CEDAR FALLS
800-642-7012
FLORIDA
HOLLYWOOD STATION
HOLLYWOOD
954-921-2700
DEPOT HOBBY SHOP
LAKE WORTH
561-585-1982
READY TO ROLL
MIAMI
305-688-8868
KENTUCKY
L&N TRAINS & THINGS
LOUISVILLE
502-897-9005
LOUISIANA
AMERICA'S TRAIN YARD
BATON ROUGE
225-926-5592
MAINE
WHEELS, WINGS & THINGS
LUDLOW
207-532-6277
MARYLAND
PLAZA HOBBY
CUMBERLAND
301-729-6424
HOBBYTOWN U S A
FREDERICK
301-694-7395
ENGINE HOUSE HOBBIES
GAITHERSBURG
301-590-0816
J & B TRAINS
HAGERSTOWN
240-420-4930
THE TRAIN ROOM
HAGERSTOWN
301-745-6681
PURKEY'S TOY TRAINS
SYKESVILLE
410-549-6061
CATOCTIN MOUNTAIN TRAINS
& HOBBIES
THURMONT
301-694-8331
MASSACHUSETTS
NORTHEAST TRAINS
PEABODY
978-532-1615
EAST BAY HOBBIES
SEEKONK
508-336-5573
MICHIGAN
TREASURED TOYS
SALEM
603-898-7224
NEW JERSEY
COUNTRY AND STUFF
ANDOVER
973-786-7086
COLUMBUS TRAIN STATION
COLUMBUS
609-518-1800
ATLANTIC RAILS
HAMMONTON
609-567-8490
GRAND CENTRAL STATION
KEARNY
201-955-6200
J & B TRAINS, INC.
MAPLE SHADE
856-414-0092
HOBBY SHOP
MATAWAN
732-583-0505
HOBBYMASTERS, INC
RED BANK
732-842-6020
RIDGEFIELD HOBBY
RIDGEFIELD
201-943-2636
TOM’S MODEL TRAINS
SCOTCH PLAINS
908-322-6122
TRAINS & THINGS
TRENTON
609-883-8790
MICHIGAN MODEL TRAIN
CENTER
PINCKNEY
734-426-1651
COAST TRAINS AND
COLLECTIBLES
WALL
732-556-9005
BRASSEUR ELECTRIC TRAINS
INC.
SAGINAW
989-793-4753
HOLLY BEACH TRAIN DEPOT
WILDWOOD
609-522-2379
MISSOURI
SWITCH STAND
SAINT LOUIS
314-781-4458
MARK TWAIN HOBBY CENTER
ST. LOUIS
636-946-2816
NEVADA
RENO RAILS
RENO
775-337-6669
NEW HAMPSHIRE
RAILROAD SPECIALTIES
NASHUA
603-801-0801
AMERICANA STORE
TIVOLI
845-757-4246
NEW YORK
AURORA RAILS & HOBBIES
EAST AURORA
716-652-5718
NASSAU HOBBY CENTER, INC.
FREEPORT
516-378-9594
HOBBY WORLD
MONTICELLO
845-794-8770
CITY DEPOT, INC.
NEW HAMPTON
845-374-3010
SCAG’S ELECTRIC TRAINS
STATEN ISLAND
718-727-7373
KROSS HARDWARE
WEST BABYLON
631-669-3069
NORTH CAROLINA
THE ROUNDHOUSE &
BACKSHOP
CARY
919-465-0810
TRAINS LTD.
CHARLOTTE
704-566-9070
DRY BRIDGE STATION
MOUNT AIRY
336-786-9811
THE FREIGHT YARD
SMITHFIELD
919-934-6229
TRAIN LOFT
WINSTON-SALEM
336-760-9817
OHIO
GLEN'S TRAIN SHOP
AKRON
330-253-6527
E & S TRAINS
AKRON
330-745-0785
T & K HOBBY SHOP
BRIDGEPORT
740-633-6607
PARMA HOBBY
CLEVELAND
216-741-6440
SANDY'S HOBBY'S &
COLLECTIBLES
ELYRIA
440-365-9999
HUDSON TOY, TRAIN &
HOBBY
HUDSON
330-653-2997
CLEARVIEW TRAIN & HOBBY
LORAIN
440-277-4488
DIXIE UNION STATION
MASON
513-459-0460
DAVIS ELECTRONICS
MILFORD
513-831-6425
TRAINS-N- THINGS
NORTH CANTON
330-499-1666
THE STATION
NEW CUMBERLAND
717-774-7096
CHESTERFIELD HOBBIES
MIDLOTHIAN
804-379-9091
GRAND PACIFIC JUNCTION
OLMSTEAD FALLS
440-235-4777
FRYER'S STORE
ORWIGSBURG
570-366-2258
DAVIS HOBBY SUPPLIES
PORTSMOUTH
757-397-1983
RICK'S TOY TRAINS
TOLEDO
419-478-0171
CHESTNUT TOYBOX
PHILADELPHIA
215-545-0455
TOY TRAIN CENTER
RICHMOND
804-288-4475
ERIE RAILWAY DEPOT
TROY
937-440-9972
TOBY TYLER'S HOBBY
CENTER
PITTSBURGH
412-653-5030
NUTBUSH EXPRESS
VICTORIA
434-696-1902
PENNSYLVANIA
AMERICAN HOBBY CENTER
ALIQUIPPA
724-378-3930
WILCOX GREENHOUSE &
NURSERY
TITUSVILLE
814-827-3823
ALLENTOWN TOY TRAIN
SERVICE
ALLENTOWN
610-821-0740
EASTERN DEPOT
TROY
570-297-1975
ON THE RIGHT TRACK
ALTOONA
814-942-4345
J&J RAILROAD CROSSING
TURTLE CREEK
412-824-6009
BUSSINGER TRAINS
AMBLER
215-628-2366
TRAINS R FUN
LEESBURG
703-779-8600
JIM’S HOBBY SERVICE
BERWICK
570-759-2695
YE OLDE TRAIN & CHRISTMAS
SHOPPE
BOYERTOWN
610-369-0755
NICHOLAS SMITH
BROOMALL
610-353-8585
CHARLEROI SWEEPER
CENTER
CHARLEROI
724-483-3397
CRANBERRY HOBBY DEPOT
CRANBERRY TWP
724-776-3640
FAIRCHANCE PHARMACY
FAIRCHANCE
724-564-7817
TOY TRAIN STATION
FEASTERVILLE TREV
215-322-5182
THE CABOOSE
LEHIGHTON
570-386-5352
HOBBY CITY
MC MURRAY
724-942-2557
SOUTH CAROLINA
T S G HOBBIES
WARRENTON
540-347-9212
NORGE STATION
WILLIAMSBURG
757-564-7623
WASHINGTON
EASTSIDE TRAINS
KIRKLAND
425-828-4098
WEST VIRGINIA
PATRICK'S TRAINS
WHEELING
304-232-0714
WISCONSIN
EMERALD TRAIN & HOBBY
GREENWOOD
864-223-2247
WOODCRAFTERS SHOP
BURLINGTON
262-763-5239
TENNESSEE
SOMMERFELD'S TRAINS
BUTLER
262-783-7797
MODEL RAILROAD & HOBBY
SHOP
MEMPHIS
901-384-6500
TEXAS
HOBBY TIME
AMARILLO
806.352.9660
RIVERVIEW TRAINS
ANGLETON
979-848-3895
GREAT TRAINS & HOBBIES
LONGVIEW
903-757-2720
VIRGINIA
LEESBURG HOBBIES
LEESBURG
703-779-8600
LOCUST GROVE TRAINS
LOCUST GROVE
540-854-8955
TRAIN DEPOT
MANASSAS
703-335-2216
HOBBY OUTLET
FOND DU LAC
920-924-3770
G B T V & TRAINS
GREEN BAY
920-496-9697
GRAMPA'S TRAIN SHOP
RICE LAKE
715-234-2996
THE TRAIN STORE
WAUKESHA
262-650-6675
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement