VM9216BT - Jensen
VM9216BT
Operating Instructions
160
watts peak
40W x 4
VM9216BT
Thank you for choosing a Jensen product. We hope you will find the instructions
in this owner’s manual clear and easy to follow. If you take a few minutes to look
through it, you’ll learn how to use all the features of your new Jensen VM9216BT
Mobile Multimedia Receiver for maximum enjoyment.
CONTENTS
Features................................................................................................................3
Controls and Indicators.......................................................................................6
Remote Control....................................................................................................8
Using the TFT Monitor.........................................................................................14
Operating Instructions........................................................................................16
Steering Wheel Controls.....................................................................................25
Settings Menu......................................................................................................26
Tuner Operation..................................................................................................34
DVD/VCD Video Operation.................................................................................40
DVD/CD Audio Operation...................................................................................46
MP3/WMA Operation..........................................................................................50
iPodВ®/iPhoneВ® Operation....................................................................................57
Pandora Operation..............................................................................................61
Bluetooth Operation...........................................................................................66
SiriusXMВ® Radio Operation.................................................................................75
Rear Camera Operation.......................................................................................83
Troubleshooting..................................................................................................84
Care and Maintenance........................................................................................88
Specifications.......................................................................................................89
Common Replacement Parts..............................................................................91
2
VM9216BT
FEATURES
Congratulations on your purchase of the Jensen VM9216BT Mobile Multimedia
Receiver. It’s a good idea to read all of the instructions before beginning the
installation. We recommend having your Jensen VM9216BT installed by a
reputable installation shop.
DVD
•
•
•
•
Aspect Ratio - Full and Normal
Fast Forward - 2X, 4X, 8X, and 20X
Slow Motion - 2X, 4X, 8X, and 20X
Play, Pause, Stop, Next Chapter, and Previous Chapter
CD / MP3 / WMA
•
•
•
•
•
•
•
•
CD-Text Compatible
ID3 Tag Compatible
Directory Search (MP3 / WMA Only)
Direct Track Access via Remote Control
Burn up to 1500 MP3 and WMA Files onto a DVD+R / RW
Audible Forward / Reverse Track Search (CD-DA Only)
Random, Repeat, and Intro
Play, Pause, Stop, Next Track, and Previous Track
AM-FM
•
•
•
•
•
USA / Europe / Latin America / Asia Frequency Spacing
30 Station Presets (18 FM / 12 AM)
Auto Stereo / Mono
Local / Distance
Auto Store / Preview Scan
iPodВ®/iPhoneВ®
• iPod®/ iPhone® via USB
• High Speed Direct Connect Interface to Access iPod® Playlists, Artists, Albums
and Songs. Play music and view video/photo* files from your iPodВ®. *Video/
photo playback requires jLink-USB iPodВ® interface cable (sold separately).
• Power Management Charges iPod® while Connected
3
VM9216BT
SiriusXMВ® Ready
• Satellite Channel Name, Artist, Song, and Categories Displayed on Monitor
Chassis
•
•
•
•
•
•
•
•
1.0 DIN (Import / ISO-DIN Mountable)
Motorized Flip-Out / Flip-Up LCD Screen
8 Character / Segment Type Secondary LCD Display
7” TFT Active Matrix LCD
336, 960 Sub Pixels (1440W X 234H)
Screen Tilt / Angle Adjustment
Beep Tone Confirmation (ON-OFF Option)
Heat Management System - Forced Air-Cooling To Keep The Chip-Sets Operating
at Nominal Temperatures
General
• Navigation Ready (NAV104)
• Built-In Bluetooth with external microphone, providing hands-free operation for
safety and convenience and A2DP for streaming music from your smartphone
or other Bluetooth device.
• 44-Key Infrared Remote Control
• One Composite Video Output for Additional Screens
• Front Panel Audio/Video Input
• Three-Band Tone control (Bass, Mid and Treble) with Eight Preset EQ Curves
Front Panel A/V Aux Input for Portable Media Devices
• Front, Rear, and Subwoofer Line Output
• Programmable Volume Control
• Rear Camera Input (Normal and Mirror Image View)
• Touch Screen Calibration Mode
• 4 VRMS Line Output - All Channels
• Rotary Encoder Audio Control
• SWC Interface - Compatible with PAC SWI-PS and Metra ASWC steering wheel
control interfaces (sold separately)
4
VM9216BT
Optional Equipment
• NAV104
The VM9216BT is “navigation ready.” Before accessing any navigation features,
you must purchase and install the navigation module (NAV104). All installation
and operating instructions will be included with the navigation module.
Once the navigation module is connected and operating properly, the NAV
source mode will become active. While the navigation module is not installed,
the NAV option appears gray, indicating the function is not available.
• Bluetooth Phone
See “Bluetooth Operation” on page 66.
• Rear Camera
The VM9216BT is “camera ready.” Before accessing any camera features, you must
purchase and install a rear video camera. Once the rear camera is connected
and operating properly, the CAMERA source mode will become active. While
the camera is not installed, the CAMERA option appears gray, indicating the
function is not available.
WARNING! Never install this unit where operation and viewing could interfere
with safe driving conditions.
WARNING! To reduce the risk of a traffic accident (except when using for rear
view video camera) never use the video display function while driving the
vehicle. This is a violation of federal law.
WARNING! Never disassemble or adjust the unit.
WARNING! To prevent injury from shock or fire, never expose this unit to
moisture or water.
WARNING! Never use irregular discs.
WARNING! To prevent damage to the mechanism inside this unit, avoid impact to
the TFT monitor.
WARNING! The monitor employs an automatic motorized mechanism. To prevent
damage to the core mechanism, please do not push, pull or swivel the monitor
manually.
5
VM9216BT
CONTROLS AND INDICATORS
OPEN
BAND
1
2
CLOSE
PIC
3
4
5
NAV / WIDE
TILT
DISP
VM9215BT
DISP
M
U
T
E
15
6
14
A/V
INPUT
SRC
13
12
11
10
9
8
7
6
VM9216BT
1. CLOSE/OPEN
Press to activate the automatic mechanical system and move the TFT monitor
into the viewing position. Press again to close the TFT.
2. PIC/BAND
With the monitor open, press PIC to adjust the Brightness and Contrast (see
“Image/Display Settings”).
With the monitor closed, press BAND to change between three FM and two
AM bands.
3. TFT Display
4. WIDE/
With the monitor open, press WIDE to adjust the display aspect of the picture
to one of two settings: Full or STANDBY.
With the monitor closed, press
to seek backward.
5. TILT/
With the monitor open, press TILT to activate the tilt function. Use the rotary
encoder to make adjustments while the blue tilt icon is flashing.
With the monitor closed, press
to seek forward.
6. EJECT
Press to eject a disc. Press and hold to reset the core mechanism position.
7. USB Interface Cover
Covers the USB interface connector. Open the cover and insert a USB device
for playback of music/video files.
8. A/V Input
Attach a compatible A/V device.
9. DISC SLOT
10. LCD Display
11. IR Remote Control Receiver (Location)
12. / SRC
Press to turn the unit on. Once the unit is on, momentarily pressing the SRC
button will display the Main Source Menu.
Press and hold to turn the unit off.
13. Rotary Encoder
Rotate to adjust the volume. Press to activate the MUTE function and silence
the receiver. Press again to resume sound.
While in tuner mode, press and hold to activate the LOC feature. Repeat to
deactivate.
14. RESET
Press to reset the system settings to factory default (except the password and
parental lock setting).
15. DISP
With the monitor open, during DVD playback, press once to view Time, Title,
Chapter info or twice for Audio, Subtitle, Angle, and Bit Rate info.
With the monitor closed, press to view alternate LCD display information.
7
VM9216BT
REMOTE CONTROL
See Table 1 for remote control functions.
3
8
4
35
5
TO
iPod
MUSIC
PHOTO
VIDEO
9
16
13
23
1
15
2
30
14
28
31
17
18
11
19
32
22
12
24
21
10
25
20
27
26
29
6
34
7
8
33
VM9216BT
Table 1: Remote Control Functions
Button
Function
Name
#
DVD
VCD
MENU
1
Enters
the main
menu of
the disc.
Turns on/off
PBC when
playing
VCD.
TITLE
2
Enters the Plays the
title menu first ten
of the disc. seconds
of each
chapter/
title.
MUTE
3
Toggles
on/off
audio
output.
Toggles on/
off audio
output.
Toggles on/ Toggles
off audio
on/off
output.
audio
output.
Toggles
on/off
audio
output.
POWER
( )
4
Turns the
power on/
off.
Turns the
power on/
off.
Turns the
power on/
off.
Turns the
power
on/off.
MUSIC/
AUDIO
5
Changes
the audio
language
for disc
playback.
REPT A-B 6
Setup to
repeat
playback
from time
frame A
to time
frame B.
Setup to
repeat
playback
from time
frame A
to time
frame B.
REPT
7
Repeats
playback
of current
chapter.
Repeats
playback
of current
chapter.
Repeats
playback
of current
track.
Repeats
playback
of current
track.
SRC
8
Selects
playing
mode.
Selects
playing
mode.
Selects
playing
mode.
Selects
playing
mode.
TUNER
CD/MP3/
USB
iPod
Selects
Photo
mode.
Selects
Music
mode.
Turns the
power on/
off.
Selects
Music
mode.
Selects
playing
mode.
9
VM9216BT
Table 1: Remote Control Functions
Button
Function
Name
#
DVD
PHOTO/
SUBTITLE
9
Language
selection
for subtitle.
DISP/
CLEAR
10 Displays
VCD
Delete entry
or move
backwards
to correct
error in
Direct Access
mode.
Display
playing
information.
Displays
playing
information.
Delete entry
or move
backwards
to correct
error in
Direct
Access
mode.
Delete entry
or move
backwards
to correct
error in
Direct
Access
mode.
Delete entry
or move
backwards
to correct
error in
Direct
Access
mode.
11
Navigates
the preset
station list.
PRESET
12
Navigates
the preset
station list.
VIDEO/
ANGLE
13 Plays back
disc in
different
angle for a
scene.
Plays back
Picture
CD with
different
angle of
picture
displayed.
14 Fast
forwards
the disc
content.
Fast
forwards
the disc
content.
15 Decreases
volume.
Decreases
volume.
10
iPod
Displays
playing
information.
PRESET
VOL -
CD/MP3/
USB
Selects
Photo
mode.
Displays
playing
playing
information. information.
Delete entry
or move
backwards
to correct
error in
Direct
Access
mode.
TUNER
Selects
Video
mode.
Decreases
volume.
Fast
forwards
the disc
content.
Accesses
iPod
Menu..
Decreases
volume.
Decreases
volume.
VM9216BT
Table 1: Remote Control Functions
Button
Function
Name
#
DVD
VCD
TUNER
CD/MP3/ iPod
USB
VOL +
16
Increases
volume.
Increases
volume.
Increases
volume.
Increases
volume.
Increases
volume.
17
Selects
the
previous
chapter
for
playback.
Selects the
previous
chapter for
playback.
Searches for
an available
radio
station by
decreasing
tuning
frequency.
Selects
the
previous
track for
playback.
Pauses
playback/
starts
playback.
18
Pauses
playback/
starts
playback.
Pauses
playback/
starts
playback.
19
Selects
the next
chapter
for
playback.
Selects
the next
chapter for
playback.
20
Stops
playback.
Stops
playback.
21
Open
direct
entry
search
screen.
Open
direct
entry
search
screen.
22
Slow
playback/
slow
rewind
playback.
Slow
playback/
slow
rewind
playback.
23
Zooms in/ Zooms in/
out on an out on an
image.
image.
/
GOTO
ZOOM
Pauses
playback/
starts
playback.
Searches
an available
radio
station by
increasing
the tuning
frequency.
Selects
the next
track for
playback.
Selects
the next
track for
playback.
Stops
playback.
11
VM9216BT
Table 1: Remote Control Functions
Button
Function
Name
#
DVD
PIC
24
Displays
Displays
set-up
set-up
parameters. parameters.
OPEN/
CLOSE
(
)
25
Opens/
closes
the TFT
monitor.
TILT
26
TILT
TUNER
CD/MP3/
USB
iPod
Opens/
closes
the TFT
monitor.
Opens/
closes
the TFT
monitor.
Opens/
closes
the TFT
monitor.
Opens/
Closes
the TFT
monitor.
Decreases
monitor tilt
angle.
Decreases
monitor tilt
angle.
Decreases Decreases Decreases
monitor
monitor
monitor
tilt angle. tilt angle. tilt angle.
27
Increases
monitor tilt
angle.
Increases
monitor tilt
angle.
Increases
monitor
tilt angle.
Increases
monitor
tilt angle.
WIDE
28
Selects
display
mode:
FULL or
NORMAL.
Selects
display
mode:
FULL or
NORMAL.
1, 2, 3,
4, 5, 6,
7, 8, 9, 0
(Numeric
Keypad)
29
Directly
accesses
chapter.
1-6
selects
preset for
current
band.
Directly
accesses
track.
BAND
(
)
30
Press
repeatedly
for slow
motion
forward/
backward.
12
VCD
Press
repeatedly
for slow
motion
forward/
backward.
Selects
FM/AM
band.
Increases
monitor
tilt angle.
VM9216BT
Table 1: Remote Control Functions
Button
Function
Name
#
SETUP
DVD
VCD
TUNER
CD/MP3/
USB
iPod
31 Displays
Setup
menu.
Displays
Setup
menu.
Displays
Setup
menu.
Displays
Setup
menu.
Displays
Setup
menu.
EQ
32 Accesses
equalizer
menu.
Accesses
equalizer
menu.
Accesses
equalizer
menu.
Accesses
equalizer
menu.
Accesses
equalizer
menu.
RDM
/#
33 Plays all
chapters
in random
order.
Plays all
tracks in
random
order.
Plays all
tracks in
random
order
INT
/*
34
EJECT
( )
35 Ejects the
disc.
Ejects the
disc.
Ejects
the disc.
Plays the
first ten
seconds of
each track.
Ejects the
disc.
Ejects the
disc.
13
VM9216BT
USING THE TFT MONITOR
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to load the display panel back into the compartment.
TFT Monitor Auto Open
• If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically
moves to the viewing position.
• If “TFT Auto Open” is “off” when the unit is turned on, press the OPEN button
on the front panel or press the
button on the remote control to move the
monitor into the viewing position.
• If “TFT Auto Open” is set to “Manual”, the TFT will not close when the key is
turned off.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the display in relationship to
the viewing angle. The monitor angle can be adjusted for optimum viewing using
one of the following methods:
Step-by-Step Angle Adjustment
• Press the TILT or TILT button on the remote control to adjust the tilt angle
of the screen one step at a time.
• Press the TILT button on the unit. While the blue tilt icon is flashing, turn the
rotary encoder to adjust the screen angle.
Continuous Angle Adjustment
Press and hold the TILT
in a continuous motion.
14
or TILT
on the remote control to adjust the tilt angle
VM9216BT
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the following protective measures
can be executed to prevent damage to the mechanism or monitor:
Table 2: Monitor Protective Measures
Obstruction
Self Protection
OPEN Button
Pressed
Power
Reconnected
Monitor loading
out horizontally
Monitor is
automatically
loaded into unit
Monitor fully
extended
horizontally
Monitor is
automatically
loaded into unit
Monitor loading in Unit stops at
horizontally
obstruction point
Monitor fully
extended
horizontally
Monitor is
automatically
loaded into unit
Monitor loading
out vertically
Unit stops at
obstruction point
Monitor swivels
back to the unit
Monitor swivels
back to the unit
Monitor loading in Unit stops at
vertically
obstruction point
Monitor swivels
back to the unit
Monitor swivels
back to the unit
After the protective procedure is executed, normal operation is resumed by
pressing the OPEN button or disconnecting and reconnecting the power.
TFT Aspect Ratio
With the monitor open, press and hold the WIDE button on the monitor to adjust
the aspect ratio as follows:
FULL
The entire screen is extended horizontally to the aspect ratio of 16 to 9. The
extension ratio is the same at any point.
STANDBY
The screen becomes black. Touch the screen to resume.
15
VM9216BT
OPERATING INSTRUCTIONS
Power On / Off
Press the
/SRC button on the front panel or press the POWER/ button on
the remote control to turn the unit on. You can also turn on the unit by pressing
the OPEN button and opening the TFT screen.
Press and hold the /SRC button on the front panel or press the POWER/
button on the remote control to power off the unit. The monitor is drawn back
into the main compartment.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line Mute
Press the rotary encoder MUTE button on the front panel or the MUTE button on
the remote control to mute the volume. The mute symbol is displayed on the TFT
screen.
Press the rotary encoder button again to restore the volume. Adjusting the
volume or using any of the audio setup features cancels the mute function.
If the “MUTE” wire is connected, audio output mutes when a telephone call is
received by a mobile phone.
Playing Source Selection
When the monitor is closed, press the SRC button on the front panel or the SRC
button on the remote control to change between available audio playing sources
in the following order: RADIO, DISC, USB1, USB2, SIRUSXM, BT, NAV, AUX, and
CAMERA. The source is displayed on the LCD screen.
16
VM9216BT
Source Menu
You can also use the touch screen to change the source through the SOURCE
MENU page. To access the SOURCE MENU, touch the top left corner of the screen
or press the SRC button on the front panel.
Source Menu Page 1
Source Menu Page 2
The SOURCE MENU consists of two pages. Touch the Next or Previous icons to
go from one page to another. Touch the DISC, RADIO, USB, USB2, SIRIUSXM,
BT (Bluetooth), NAV, AUX IN, CAMERA or SETTINGS icons to select the
corresponding source.
NOTE: If an iPod® or iPhone® is attached to a USB port, “IPOD” appears instead of
the text “USB.”
17
VM9216BT
External Devices
External peripheral devices, including a game console, camcorder, navigation unit,
iPod, Zune, etc. can be connected to this unit via RCA output using an A/V Media
Adapter Cable (not included).
A/V
INPUT
1
2
3
4
Right Audio
Left Audio
Ground
Video
3.5mm A/V Cable (not included)
Connect the external device to the A/V Media Adapter Cable and then plug the
cable into the A/V INPUT connector on the front of the radio. Select “AUX IN1” on
the SOURCE MENU to access auxiliary devices. You cannot directly control external
devices connected to the A/V INPUT.
For information regarding the use of USB devices, see “Inserting a USB Device.”
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder on the front
panel or press the VOL +/VOL - buttons on the remote control. When the volume
level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has
been reached. The LCD or TFT screen displays the volume level for 3 seconds.
Programmable Turn-On Volume
This feature allows the user to select a turn-on volume setting regardless of the
volume setting prior to turning the unit off. To use this feature, the TFT monitor
must be displayed.
To program a specific turn-on volume level, turn the rotary encoder to adjust the
volume to the desired turn-on volume. Push and hold the rotary encoder while
the blue speaker icon and level indication is displayed on the screen. The unit will
beep to confirm your turn-on volume setting.
18
VM9216BT
Audio Control Menu
The Audio Control feature allows you to easily adjust your audio system to meet
the acoustical characteristics of your vehicle, which vary depending on the type of
vehicle and its measurements. Proper setting of the Fader and Balance boosts the
effects of the cabin equalizer.
Equalizer
Touch the EQ
icon on the right side of the touch screen to display the
equalizer screen or press the EQ button on the remote control.
• Use the touch screen +/- icons to adjust the settings for an audio feature.
19
VM9216BT
Table 3. Equalizer Adjustments
Setting
Adjustable
Range
Function
BASS
-14 to +14
Reduces or increases the bass frequency
sound level.
Touch the + or - buttons to adjust the
settings.
MID
-14 to +14
Reduces or increases the mid-range
frequency sound level.
Touch the + or - buttons to adjust the
settings.
TREBLE
-14 to +14
Reduces or increases the high
frequency sound levels.
Touch the + or - buttons to adjust the
settings.
LCF
60 Hz
Selects the low pass filter center
frequency.
Touch the + or - buttons to adjust the
settings.
80 Hz
100 Hz
200 Hz
MCF
0.5 kHz
1 kHz
1.5 kHz
2.5 kHz
TCF
10 kHz
12.5 kHz
15 kHz
17.5 kHz
Equalizer Presets
User
Acoustic
Urban
Rave
Latin
Dance
Hip Hop
Rock
20
Selects the mid pass filter center
frequency.
Touch the + or - buttons to adjust the
settings.
Selects the high pass filter center
frequency.
Touch the + or - buttons to adjust the
settings.
Applies a preset sound level to the
unit’s audio output signal.
Touch the or button to change the
setting.
NOTE: The equalizer will automatically
change to “USER” when individual audio
functions are adjusted.
VM9216BT
To exit the equalizer:
• touch the X button on the top left corner of the screen or press and hold the
rotary encoder to return to the previous screen.
• touch the BAL-FAD button on the left side of the screen to display the balance/
fader screen.
21
VM9216BT
Balance-Fader
Touch the BAL-FAD button on the left side of the equalizer screen to display the
balance/fader screen.
Table 4. Balance-Fader Adjustments
Setting
Adjustable
Range
Function
Balance
-16 to +16
Balances the audio output levels
between the left and right side of the
vehicle.
Touch the or button to change the
setting.
Fade
-16 to +16
Balances the audio output levels
between the front and back side of the
vehicle.
Touch the or button to change the
setting.
Sub
-14 to +14
Reduces or increases the subwoofer
sound level.
Touch the + or - buttons to adjust the
settings.
22
VM9216BT
To exit the balance-fader:
• touch the X button on the top left corner of the screen.
• touch the EQ button on the left side of the screen to display the equalizer
screen.
23
VM9216BT
System Reset
[RESET] Button
To correct a system halt or other illegal operation,
use the tip of a pen to press the reset button located on the front bottom-right corner of the unit.
After a system reset, the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the
reset is complete.
Image/Display Settings
Video Output Modes
Table 5 shows the video output mode for each playing source.
Table 5: Video Output Modes
Playing Source
Video Output Modes
AM/FM TUNER
YCbCr Mode
DVD
YCbCr Mode
AUX IN
CVBS Mode
*CVBS – Composite Video Baseband Signal
Picture Adjustment
To adjust monitor display settings, perform the following steps:
1. Press the PIC button on the monitor to display the picture adjustment menu.
The “BRIGHT” bar is highlighted in yellow.
2. Turn the rotary encoder to adjust the brightness setting level.
3. Press the PIC button again. The “CONTRAST” bar is highlighted in yellow.
4. Turn the rotary encoder to adjust the contrast setting level.
5. Press the PIC button again to exit the picture adjustment menu.
Parking Brake Inhibit
When the pink “Parking” wire is connected to the vehicle Parking Brake circuit, the
front TFT monitor will display video when the Parking Brake is engaged. (When
the pink wire is grounded via the Parking Brake circuit, video will be displayed.)
24
VM9216BT
STEERING WHEEL CONTROLS (SWC)
(if equipped)
The VM9216BT is compatible with the PAC (Pacific Accessory Corporation)
SWI-PS and Metra ASWC steering wheel control adapters. A 3.5mm female
connector (labeled “SWC Interface”) on the back of the head unit allows
connectivity to the adapters. Please refer to the instructions included with the
adapters for detailed installation information.
SWC Functions
The following controls are available for most vehicles:
1. Volume Up
2. Volume Down
3. Mute
4. Seek Up
5. Seek Down
6. Source
7. Preset Up
8. Preset Down
9. Band
**If additional SWC buttons are available on the vehicle, these features may be
supported. All SWC functions may not be available on some vehicles.
25
VM9216BT
SETTINGS MENU
To access system settings, touch the Settings icon on the source menu or press the
SETUP button on the remote control to enter the SETTINGS MENU. The General
Sub-menu appears on the bottom of the screen highlighted in blue.
Accessing Menu Items
Touch the sub-menu name on the bottom of the screen to select a sub-menu
(General, Language, Rating, Audio, Hardware or Demo). The features available for
adjustment under the highlighted sub-menu option will appear on the left of the
screen.
Adjusting a Feature
1. T ouch an item on the touchscreen to select the feature to be adjusted. Touch
the or icon to view the previous or next feature page, if applicable. An
options list appears on the right.
2. Touch the option field for the feature you want to adjust. The feature option is
updated.
26
VM9216BT
General Sub-menu Features
Setting
Options
Function
Tuner
Region
USA
•
•
•
•
AM Frequency Spacing - 10 kHz
AM Frequency Band - 530 kHz ~ 1720 kHz
FM Frequency Spacing - 200 kHz
FM Frequency Band - 87.5 MHz ~ 107.9 MHz
S.Amer1
•
•
•
•
AM Frequency Spacing - 10 kHz
AM Frequency Band - 530 kHz ~ 1720 kHz
FM Frequency Spacing - 100 kHz
FM Frequency Band - 87.5 MHz ~ 108.0 MHz
Arabia
•
•
•
•
AM Frequency Spacing - 9 kHz
AM Frequency Band - 531 kHz ~ 1620 kHz
FM Frequency Spacing - 100 kHz
FM Frequency Band - 87.5 MHz ~ 108.0 MHz
China
•
•
•
•
AM Frequency Spacing - 9 kHz
AM Frequency Band - 522 kHz ~ 1620 kHz
FM Frequency Spacing - 100 kHz
FM Frequency Band - 87.5 MHz ~ 108.0 MHz
S. Amer2
•
•
•
•
AM Frequency Spacing - 5 kHz
AM Frequency Band - 520 kHz ~ 1600 kHz
FM Frequency Spacing - 100 kHz
FM Frequency Band - 87.5 MHz ~ 108.0 MHz
Europe
•
•
•
•
AM Frequency Spacing - 9 kHz
AM Frequency Band - 522 kHz ~ 1620 kHz
FM Frequency Spacing - 50 kHz
FM Frequency Band - 87.5 MHz ~ 108.0 MHz
Korea
•
•
•
•
AM Frequency Spacing - 9 kHz
AM Frequency Band - 531 kHz ~ 1602 kHz
FM Frequency Spacing - 200 kHz
FM Frequency Band - 88.1 MHz ~ 107.9 MHz
Off
Turn On/Off the RDS feature.
RDS
On
CT
Clock Mode
Off
On
System time is synchronized with current
broadcast station time (Clock Time). Setting this
feature to On will automatically set your system
clock.
12Hr
Clock displays 12 hour time using AM and PM.
24Hr
Clock displays 24 hour time up to 23:59.
27
VM9216BT
Setting
Options
Function
Clock
(HH:MM)
Clock appears in the top right corner of the
screen during certain operations.
NOTE: The AM/PM indication will change as you
continue to adjust the hour past 12.
Beep
Off
No beep sounds.
On
When turned on, an audible beep tone
confirms each function selection.
TsCal
Yes
Press to access the touch screen calibration
function.
Wallpaper
Engine Button
Allows the user to select a screen background.
The Wallpaper will not appear on the Main
Source Menu, Camera source or EQ settings
page.
Green Cubes
Red Swirl
Tribal
Blue Haze
28
VM9216BT
Language Sub-menu Features
If a DVD supports more than one Subtitle or Audio language, all the languages are
available for selection during playback. If the selected language is not supported
by the DVD, then the default language is used.
Setting
Options
Function
Language
English
Display appears in English.
Subtitle
English
DVD subtitles automatically appear in English
when available.
Auto
DVD subtitles appear according to the default
subtitle language specified on the disc.
Off
DVD subtitles do not appear.
Audio
English
Audio is heard in English when the option is
available.
DVD Menu
English
DVD menu (if applicable) is displayed in English.
29
VM9216BT
Rating Sub-menu Features
The DVD system has a built-in parental lock feature to prevent unauthorized
persons from viewing restricted disc content. By default, the rating system is
unlocked. Once set up, the parental lock is released only by entering the correct
password. Once the password is entered, rating is available for setup.
Setting
Options
Function
Set Password
____
Enter a 4-digit password to activate the
“Rating” feature
Parental Ctrl
1. Kid Safe
Select the appropriate rating level for the
intended audience. You may override higher
ratings by using your password.
2. G
3. PG
4. PG-13
5. PG-R
6. R
7. NC-17
8. Adult
Load Factory
Reset
Select “Reset” to restore the factory default
settings for the Rating system only.
To reset the password, access the “RATING” menu and enter the current password.
Once the correct password is entered, you can access the “Password” field and
enter a new one.
NOTE: Record the password and keep it in a safe place for future reference. The
rating for each disc is marked on the disc, disc packing, or documentation. If the
rating is not available on the disc, the parental lock feature is unavailable. Some
discs restrict only portions of the disc, allowing the appropriate content to play. For
details, please refer to the disc description.
30
VM9216BT
Audio Sub-menu Features
Setting
Options
Function
DRC
Off
Employ the Dynamic Range Control (DRC) for
better playback for low volumes.
On
Loudness
Off
LO
Select low frequency boost only or high and low
frequency boost.
HI/LO
Subwoofer
Off
Turns the subwoofer output on or off.
On
Sub Filter
80 Hz
120 Hz
160 Hz
BASS Q
1.0
1.25
Selects a crossover frequency to set a cut-off
frequency for the subwoofer’s Low-Pass Filter
(LPF).
Adjust the Q / Bandwidth of the bass response
of the selected Bass Center Frequency (BCF).
1.5
2.0
MID Q
0.5
0.75
1.0
Adjust the Q / Bandwidth of the midrange
response of the selected Midrange Center
Frequency (MCF).
1.25
Source
Radio
Disc
USB1
Choose a source for which you would like
to increase or decrease the relative volume
(LEVEL).
USB2
AUX IN
Nav
BT
Level
0 to 6
The default level is 3 (0dB reference):
0 = (-6dB)
1 = (-4dB)
2 = (-2dB)
3 = (0dB)
4 = (+2dB)
5 = (+4dB)
6 = (+6dB).
31
VM9216BT
Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and the TFT monitor is
retracted inside the unit, the TFT monitor automatically moves into the viewing
position and Camera mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back inside unit.
Setting
Options
Function
Color Select
White
This feature allows the user to select
eight pre-defined LED colors for the
front panel button illumination.
Red
Blue
Green
Yellow
Purple
AquaBlue
SkyBlue
Custom
Color Scan
On
Off
Color Custom
Red
Green
The unit will “scan” the color spectrum to
allow the user to select a color.
This feature allows the user to tune the
RGB colors of the LEDs to obtain an
exact match for their vehicle.
Blue
Camera In
Normal
Mirror
TFT Auto Open
On
The TFT panel automatically opens
when the unit is turned on.
Off
You must press the OPEN button to
open the TFT panel.
Manual
When the ignition is turned OFF, the
TFT panel DOES NOT retract if it was
previously out.
NSTC
Video Input (Input
circuitry auto detects the
video signal from the
PAL
Aux In source).
Auto
32
Reverse the camera image as if looking
through a rear-view mirror.
The color signals are output in the
standard NTSC format.
The color signals are output in the
standard PAL format.
The color signal output is switched
automatically based on the current
video input signal - NTSC or PAL.
VM9216BT
If the monitor is in display mode, the monitor automatically switches to CAMERA
mode upon reverse driving. When the reverse driving stops, the monitor return to
its original input mode.
Demo Sub-menu Features
The Demo mode is on and set to Auto run by default. The Demo mode will
display various user interface TFT display pages such as the Radio, Disc, Aux In,
and Camera sources. The Demo mode will also display the Equalizer and Settings
menu pages. Touching any portion of the touch screen will pause the Demo mode
temporarily. If the touch screen is not pressed again (within 30 seconds) the Demo
mode will resume.
To turn the Demo mode off, access the Settings Menu and turn Auto run to OFF.
TS Cal (Screen Calibration)
To access the “Screen Calibration” function from the SETTINGS MENU, select the
“TS CAL” option.
After entering calibration mode, a crosshair + appears in a corner quadrant of the
screen. To begin calibration, touch and hold the crosshair for one second until it
moves to the next quadrant. Continue for each quadrant until the calibration is
completed.
Exiting the System Settings Menu
To exit setup mode and resume normal playback, touch the Setting icon on the
screen.
33
VM9216BT
TUNER OPERATION
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to load the display panel back into the compartment.
Tuner TFT Display
The on-screen indicators and touch key areas for the tuner functions are shown
below.
Menu
Page 1
Menu
Page 2
34
VM9216BT
1. R
adio icon: Touch to view the SOURCE MENU and select a new playback
source.
2. Current radio band indicator.
3. Stereo broadcasting indicator.
4. Loc/Dx Indicator: Strong/Local signal broadcasting indicator.
5. Equalizer setting indicator: Displays the current equalizer preset setting.
6. EQ
icon: Touch for quick access to Equalizer level settings.
7. Clock: Displays the time as entered by the user in the settings menu.
8. Program Information: This indicator provides three types of information: PS,
RT, and PTY. PTY displays the program category of the current station such as
category (news, sports, talk etc.) RT/PS provide the current song title, current
song title, performing artist and station call letters.
9. Radio frequency indicator
10. icon: Touch to seek forward.
11. icon: Touch to tune forward one step.
12. icon: Touch to tune backward one step.
13. icon: Touch to seek backward.
14. More icon: Touch to toggle between menu page 1 and menu page 2.
15. AS icon: Touch to automatically store stations.
16. PTY icon: Touch to activate the program type related search function.
17. Scan icon: Touch to scan all stations available, stopping for 5 seconds at each
and continuing until a station is selected.
18. Mem icon: Touch to display screen used to enter current channel into preset
memory.
19. Band icon: Touch to change between AM/FM bands.
20. Direct Entry icon: Touch to access the direct entry screen.
21. Presets: Provides a display of the preset frequencies. Touch to recall preset
stations.
22. Options icon: Touch to access CT and LOC functions.
35
VM9216BT
Options Submenu
Touch the Options icon to display the CT and LOC functions on the Tuner TFT
display screen.
CT: ( Clock Time, RDS feature) When enabled the radio system clock is
synchronized with broadcasters time signal setting the clock automatically.
In some regions where daylight savings time is not adhered to, the system
clock will be off by one hour. In these cases, set CT to OFF and manually set
the clock.
LOC: This allows the user to activate local station reception function. When the
Local function is on, only radio stations with a strong local radio signal are
played.
36
VM9216BT
Switching to Radio Tuner Source
• Touch the top left corner of the screen (the radio box) to view the SOURCE
MENU. Touch “Radio”.
• Press the SRC button on the front panel to switch to the AM/FM or RADIO
source.
Selecting FM/AM Band
Touch the Band icon on the screen to change between the following bands: FM1,
FM2, FM3, AM1, and AM2.
NOTE: The BAND button on the front panel of the unit only works when the TFT is
closed.
Seek Tuning
To seek the next higher station, touch the
To seek the next lower station, touch the
Manual Tuning
button.
button.
To increase or decrease the tuning frequency one step, touch the
or
button.
Direct Tuning
To enter a radio station directly:
1. Touch the Direct Entry icon to display the DIRECT ENTRY MENU.
2. E nter the desired radio station frequency using the on-screen number pad.
If you wish to delete an entry number touch the
icon. Press OK to tune
to the selected station and touch the OK button. To exit the screen without
changing the station, touch X.
37
VM9216BT
Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six stored
stations (P1 - P6) for the current band appear on the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen Mem icon to access the preset screen.
3. T ouch the preset number in which you would like to store the current station
(or touch X to cancel and close the menu). The station frequency is displayed
at the top of the menu. The preset number will appear highlighted. The
station frequency will be stored in the highlighted preset. The station will be
displayed on the front panel of the tuner screen.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button to select the corresponding stored station.
38
VM9216BT
Auto Store (AS)
To select six strong stations and store them in the current band:
1. Select a band (if needed).
2. Touch the AS icon on the on-screen controls to activate the Auto Store
function.
The new stations replace stations already stored in that band. If you have already
set the preset memories to your favorite stations, activating the Auto Store feature
will erase those stations and enter the new strong stations. This feature is most
useful when travelling in an area where you are not familiar with the local stations.
Preview Scan (SCAN)
To scan the AM or FM band for a preview of available stations in your particular
area, touch Scan. The scan function will play the first five seconds of each station.
When a desired station is reached, touch Scan again. Play of the selected station
will continue and the preview scan will stop.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a strong local radio signal
are played. To activate the Local function in the AM/FM tuner mode:
1. Touch the Options icon on the touch screen. A pop-up window appears.
2. Touch LOC ON/OFF to turn the local function on or off.
When the Local function is active, the LOC indicator at the top of the screen is
illuminated. When the Distant function is active, the DX indicator at the top of the
screen is illuminated.
39
VM9216BT
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be displayed on the main TFT
screen unless the parking brake is applied. If you attempt to play a DVD while the
vehicle is moving, the TFT screen display a parking brake notice. Rear video screens,
if applicable, will operate normally.
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to load the display panel back into the compartment.
DVD/VCD TFT Display
Warning!!! It is illegal to view video while driving or operating a motor vehicle.
Set parking brake to view video.
To access the on-screen controls, touch the bottom 1/3 of the screen while a DVD
is playing. Touch
to view a second page of controls.
DVD
Menu
Page 1
DVD
Menu
Page 2
40
VM9216BT
1. icon: Touch to advance to the next chapter on the DVD.
2. icon: Touch to see the second page of DVD controls.
3. icon: Touch to select a chapter/track directly using the on-screen display
direct entry menu display
4. icon: Touch to stop DVD playback.
5. Sub icon: Touch during playback to select the subtitle language if the disc
is recorded in multiple languages. Each time the icon is touched a different
subtitle language is selected. The subtitle function can also be turned on or
off.
6. Audio icon: Touch during playback to select to select the audio language.
Each time the icon is touched a different audio language is selected if you are
watching a disc recorded in multiple languages.
7. icon: Touch to remove the DVD controls from the screen during DVD
playback.
8. icon: Touch to fast reverse. Keep touching and releasing the icon to
increase the rate from “x2” to “x4”, “x8”, and “x20”. Touch the icon again to
resume normal play.
9. icon: Touch to fast forward. Keep touching and releasing the icon to
increase the rate from “x2” to “x4”, “x8”, and “x20”. Touch the icon again to
resume normal play.
10. icon: Touch to move to previous chapter.
11.
icon: Touch to begin playback. Touch the icon again to pause playback.
12. Title icon: Touch to select a different title for playback. Select a title using the
touch screen.
13. DISP icon: Touch to display playback information on the screen including the
media playing and current playback time.
14. EQ:Touch for quick access to the Equalizer level settings.
15. icon: Touch to view the SETTINGS menu.
16. 1/2 icon: Touch to select and activate Slow Motion Playback (Forward and
Reverse). Touch to play the current title in slow motion. Keep touching and
releasing the icon to change the rate from forward 1/2, 1/4, 1/6 and 1/8 speed.
Continue for slow motion backward at 1/2,1/4, 1/6 and 1/8 speeds.Touch the
on-screen play icon ( ) to resume normal play.
17. icon: Touch during playback to repeat the current chapter. Touch the icon
a second time to repeat the current title. Touch the icon a third time to turn
the repeat function off.
18. A-B icon: Touch to repeat a specific portion from point A to point B of the
DVD disc.
19. icon: Touch to view angles if the DVD contains scenes shot from different
angles.
20. Menu icon: Touch to display the DVD root menu.
41
VM9216BT
Controlling Playback
Inserting a Disc
Upon inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized,
the 4-digit code must be entered and/or the disc must be authorized (see “Rating
Sub-menu Features”).
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and
the DVD is closed.
Ejecting a Disc
Press the button on the front of the unit to eject the disc. The unit automatically
reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will
remain off after the disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button to reset the loading mechanism. Normal operation
resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the SRC button on
the front panel to access the source menu. Touch the disc icon.
Repeat Playback
Touch the button to alter repeat mode according to the following:
• DVD: Repeat Chapter, Repeat Title, Repeat Off
• VCD (PBC Off ): Repeat Single, Repeat Off
NOTE: For VCD play, the repeat function is not available if PBC is on.
42
VM9216BT
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to repeat.
• Touch A-B on the second page of DVD on-screen controls to set the start point
(A) of the repeated section.
• Touch A-B again once you reach the desired end point (B) of the repeated
section. The selected portion of the DVD will now repeat continuously.
• Touch A-B a third time to cancel the A-B section setting and stop repeat play.
Accessing the DVD Source Menu
• Touch MENU on the second page of DVD on-screens controls to recall the DVD
source menu. Touch to select a title from the menu.
• Touch TITLE on the second page of DVD on-screen controls to select a different
title for playback.
• Select a title using the touch screen.
Moving Through Chapters
Touch
Touch
to advance to the next chapter on the DVD.
button to move to the previous chapter.
Direct Chapter / Track Selection
To select a chapter/track directly:
1. Touch the on-screen to display the Direct Entry Menu.
2. E nter the desired chapter/track using the on-screen number pad.
3. Touch the check mark to enter your selection. To exit the screen without
changing the station, touch X. To clear your entry and start over, touch the
back arrow.
Viewing an Alternate Picture Angle (DVD Only)
Some DVDs contain scenes that have been shot simultaneously from different
angles. For discs recorded with multiple angles, touch on the second page of
DVD on-screen controls to toggle available angles of the on-screen image.
43
VM9216BT
Multi-Language Discs (DVD Only)
Changing Audio Language
If you are watching a disc recorded in multiple languages, touch AUDIO on the
second page of DVD on-screen controls to choose a language. Each time the icon
is touched the language will change.
Changing Subtitle Language
If you are watching a disc recorded in multiple languages with subtitles, touch
Sub on the second page of DVD on-screen controls to choose the language in
which you would like the subtitles to appear.
NOTE: During VCD playback, touch the AUDIO on the second page of DVD onscreen controls to choose between Left Channel, Right Channel, and Stereo.
PBC - Play Back Control (VCD Only)
For VCDs with play back functionality, play back control (PBC) provides additional
controls for VCD playback.
Touch PBC on the first page of DVD on-screen controls to toggle the PBC function
“On”/”Off”. Once PBC is on, playback starts from track one of the play list.
NOTE: When PBC is activated, fast forward, slow playback, and previous/next track
are available. Repeat and direct track selection are not available.
When PBC is activated, selecting random, scan, or search playback automatically
deactivates PBC.
Playback Information
During DVD and VCD playback, touch DISP on the second page of DVD on-screen
controls to display playback information on the screen, including the media
playing and current playback time.
DVD Playback Information
•
•
•
•
DVD Video – Format of current disc.
Time 00:01:30/00:36:10 – Indicates the playback time of the current track.
Title 5/08 – Indicates the fifth of 8 titles on the DVD is currently playing.
Chapter 2/16 – Indicates that the second of 16 chapters on the DVD is currently
playing.
VCD Playback Information
• VCD2.0 – Format of current disc.
• Time 00:01:30/00:36:10 – Indicates the playback time of the current track.
• PBC On/Off – Indicates whether Play Back Control is On or Off.
44
VM9216BT
General Disc Information
Table 6: Disc Properties
Symbol
12 cm Disc Properties
Max Play Time
Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)
(MPEG 2 Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer (VCD)
(MPEG 1 Method)
74 minutes
Single side single layer
74 minutes
Table 7: Disc Symbols
Symbol
Meaning
Number of voice languages recorded. The number inside the icon
indicates the number languages on the disc (maximum of 8).
Number of subtitle languages available on the disc (maximum of 32).
Number of angles provided (maximum of 9).
Aspect ratios available. “LB” stands for Letter Box and “PS” stands for
Pan/Scan. In the example on the left, the 16:9 video can be converted
to Letter Box video.
Indicates the region code where the disc can be played.
• Region 1: USA, Canada, East Pacific Ocean Islands
• Region 2: Japan, Western Europe, Northern Europe, Egypt, South
Africa, Middle East
• Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia,
South-East Asia
• Region 4: Australia, New Zealand, Middle and South America,
South Pacific Ocean Islands/Oceania
• Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe,
North Korea, North Africa, North-West Asia
• Region 6: Mainland China
• ALL: All regions
45
VM9216BT
DVD/CD AUDIO OPERATION
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to load the display panel back into the compartment.
Media Requirements
The VM9216BT will play music or other audio files from the following disc media:
• CD-DA
• CD-R/RW
• DVD
• DVD+R/RW
• DVD-R/RW
Upon inserting a disc with the TFT screen open, the disc and track title (if
available), along with the track number and playing time appear on the screen.
CD TFT Display
The on-screen indicators and touch key areas for CD playback are outlined below.
Menu
Page 1
Menu
Page 2
46
VM9216BT
Disc icon: Touch to view the SOURCE MENU and select a new playback source.
Repeat Play Indicator - This indicator is lit when the repeat mode is active.
Random Play Indicator - This indicator is lit when the random mode is active.
Equalizer setting indicator: Displays the current equalizer preset setting.
EQ
: Touch for quick access to the Equalizer level settings menu.
Clock: Displays the time as entered by the user in the settings menu.
Preview Window: Displays album art, if available.
Toggle (
) icon: Touch to toggle between menu page 1 and menu
page 2.
9. Stop ( ) icon: Touch to stop playback.
10. Next ( ) icon: Touch to play the next track.
11. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume
playback.
12. Previous ( ) icon: Touch to play the previous track.
13. List icon: Touch to display the Playlist screen.
14. Elapsed time Indicator: Displays the elapsed and total playing time of the
current track playing.
15. Track Indicator: Displays the current track number playing and total number of
tracks on disc.
16. Settings ( ) icon: Touch to view the SETTINGS menu.
17. EQ icon: Touch for quick access to the Equalizer level settings menu.
18. Repeat (
) icon: Touch to alter repeat mode as follows: Repeat Single >
Repeat Folder > Repeat All > Repeat Off
19. Random (
) icon: Touch to alter random mode as follows: Random On >
Random Off
1.
2.
3.
4.
5.
6.
7.
8.
47
VM9216BT
Playlist Screen
The Playlist screen allows you to directly search for music on your disc.
• Touch a track title (if available) or track number to begin playback of that track.
• Touch to view the previous playlist page. Touch to view the next
playlist page.
• Touch
to return to menu page 1.
48
VM9216BT
Controlling Playback
Inserting a Disc
Upon inserting a CD, disc play begins. You cannot insert a disc if there is already a
disc in the unit or if the power is off.
Ejecting a Disc
Press the button on the front of the unit to eject the disc. The unit automatically
reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will remain off after the
disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button to reset the loading mechanism. Normal operation
resumes.
Stopping Playback
Touch the Stop ( ) icon to stop disc play.
To resume playback, touch the Pause/Play (
) icon.
Pausing Playback
Touch the Pause/Play (
) icon to suspend or resume disc play.
Moving Through Tracks
Touch the Next ( ) icon to advance to the next track on the disc.
Touch the Previous ( ) button to move to the previous track.
Repeat Playback
Touch the
icon to alter repeat mode according to the following:
• DVD: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• CDDA: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• CD-R/RW: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• DVD-R/RW: Repeat Single > Repeat Folder > Repeat All > Repeat Off
Random Play Select
Touch the Random (
) icon to play the tracks on the disc in a random, shuffled
order.
Touch the Random (
) icon again to cancel Random Play mode.
NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
49
VM9216BT
MP3/WMA OPERATION
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to load the display panel back into the compartment.
Media and File Requirements
This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs,
DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted
using the full method and not the quick method to prevent illegal disc operation.
For the greatest file capacity, Dual Layer DVD’s can be used when burning music to
a disc.
MP3 Format Compatibility
The file naming formats listed below are compatible with this unit:
• ISO 9660 – file name: 12 characters, file extension: 3 characters
• ISO 9660 – file name: 31 characters, file extension: 3 characters
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file system standards, it
may not be displayed or played back correctly. Use the following settings when
compressing audio data for your MP3 disc:
• Transfer Bit Rate: 128 kbps
• Sampling Frequency: 48 kHz
When recording MP3 up to the maximum disc capacity, disable additional writing.
For recording on an empty disc up to maximum disc capacity, use the “Disc at
once” setting.
MP3 Playing Order
When selected for play, files and folders (Folder Search, File Search or Folder
Select) are accessed in the order they were written by the CD writer. As a result,
the order in which they are expected to be played may not match the order in
which they are actually played. You may be able to set the order in which MP3/
WMA files are to be played by writing them onto a medium such as a CD-R with
their file names beginning with play sequence numbers such as “01” to “99”.
50
VM9216BT
For example, a medium with the following folder/file hierarchy is subject to Folder
Search, File Search or Folder Select, as shown below.
The VM9216BT player will only recognize three folder levels and does not display
folders containing only other folders. In the example above, the unit will display
folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly.
Folder 5 is not recognized at all since it is at the fourth level.
Inserting a USB Device
NOTE: The USB port will recognize most USB flash memory devices and portable
hard drives (hard drives must be formatted to FAT32 and NTFS is not supported).
NOTE: Front and rear USB ports are for Apple devices, USB memory sticks or
portable HDD. The rear 3.5mm connector (bundled with the USB port) is for iPodВ® /
iPhoneВ® video only.
1. Locate the USB interface cover on the front of the radio.
A/V
INPUT
Type A
USB Connector
2. L ift the protective cover to expose the USB connector.
3. Insert the USB device into the USB connector. The unit will read the audio/
video files on the USB device automatically.
Removing a USB Device
To remove the USB device, press the SRC button or use the SOURCE MENU to
switch to another mode, and then remove the USB device from the connector.
51
VM9216BT
MP3/WMA TFT Display
The on-screen indicators and touch key areas for MP3/WMA playback are outlined
below.
Menu
Page 1
Menu
Page 2
52
VM9216BT
ISC: Touch to view the SOURCE MENU and select a new playback source.
D
Repeat Play Indicator - This indicator is lit when the repeat mode is active.
Random Play Indicator - This indicator is lit when the random mode is active.
Equalizer setting indicator: Displays the current equalizer preset setting.
EQ
: Touch for quick access to the Equalizer level settings menu.
Clock: Displays the time as entered by the user in the settings menu.
Preview Window: Displays album art, if available.
Toggle icon (
): Touch to toggle between menu page 1 and menu
page 2.
9. Stop ( ) icon: Touch to stop MP3/WMA playback.
10. Next ( ) icon: Touch to play the next track.
11. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume
playback.
12. Previous ( ) icon: Touch to play the previous track.
13. List icon: Touch to display the Playlist screen.
14. Playback Information Display: Displays song, artist, album and elapsed/total
playing time of the current track playing.
15. Track Indicator: Displays the current track number playing and total number of
tracks on disc/USB device.
16. Settings ( ) icon: Touch to view the SETTINGS menu.
17. EQ icon: Touch for quick access to the Equalizer level settings menu.
18. Repeat (
) icon: Touch to alter repeat mode as follows: Repeat Single >
Repeat Folder > Repeat All > Repeat Off
19. Random (
) icon: Touch to alter random mode as follows: Random On >
Random Off
1.
2.
3.
4.
5.
6.
7.
8.
53
VM9216BT
Playlist Screen
The Playlist screen allows you to directly search for music, video or photo files
stored on your MP3 disc/USB device.
• Touch a folder to view the contents of the directory or touch a track title/file
name to begin playback of that file.
• Touch to view the previous playlist page. Touch to view the next
playlist page.
• Touch
to return to menu page 1.
54
VM9216BT
Search Playlist by File Type
1. Touch the MUSIC icon.
2. T ouch “MUSIC,” “PHOTO” or “VIDEO”. The list of files that appear will be filtered
by the type of file selected.
55
VM9216BT
Controlling Playback
Inserting a Disc
Upon inserting a MP3/WMA disc, disc play begins. You cannot insert a disc if there
is already a disc in the unit or if the power is off.
Ejecting a Disc
Press the button on the front of the unit to eject the disc. The unit automatically
reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will remain off after the
disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button to reset the loading mechanism. Normal operation
resumes.
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the sequence of the “Root’
directory.
NOTE: When burning MP3 / WMA files onto a DVD disc, use the 2X or 4X burning
option, if available. This slower burning speed will help eliminate buffer errors and
increase disc reading reliability. Also, use folders when burning large numbers of
songs / files to a disc for easy music navigation. Select the “Disc at Once” option and
close your disc.
Stopping Playback
Touch the Stop ( ) icon to stop playback.
To resume playback, touch the Pause/Play (
) icon.
Pausing Playback
Touch the Pause/Play (
) icon to suspend or resume playback.
Moving Through Tracks
Touch the Next ( ) icon to advance to the next track
Touch the Previous ( ) button to move to the previous track on the MP3 disc/
USB device.
Repeat Playback
Touch the Repeat (
) icon to alter repeat mode as follows: Repeat Single >
Repeat Folder > Repeat All > Repeat Off
NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
Random Play Select
Touch the Random (
) icon to play the tracks on the MP3 disc/USB device in a
random, shuffled order. Touch the Random (
) icon again to cancel Random
Play mode.
56
VM9216BT
iPodВ®/ iPhoneВ® OPERATION
This unit is Made for iPodВ® and iPhoneВ®. You can control your iPodВ® and iPhoneВ®
via the touch screen to access Playlist, Artist, Albums, Songs, etc. Supported
models include, but are not limited to the following:
• iPhone® 4S / 4 / 3GS / 3G and 1st Generation
• iPod® touch 4th / 2nd and 1st Generation
• iPod® nano 6th / 5th / 4th and 3rd Generation
• iPod® classic and iPod® with video
NOTE: Be sure your iPodВ® has the latest Apple firmware installed to avoid
connectivity issues.
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to load the display panel back into the compartment.
Accessing iPodВ® Mode
The unit will automatically switch to iPodВ® mode when an iPodВ®, iPodВ® touch or
iPhoneВ® is plugged into the front or rear USB connector.
NOTE: For basic iPodВ® connectivity, you can use the white 30-pin to USB iPod cable
that came with your Apple device . For iPodВ® video or photo playback, you must
purchase the jLink-USB cable.
To return to the iPodВ® menu from any other source menu, touch SRC on the front
panel until the iPodВ® menu appears on the screen, or choose the iPodВ® icon from
the source menu (only available when an iPodВ® or iPhoneВ® is connected to the USB
connector).
57
VM9216BT
Search Screen
The Search Screen allows you to search for music or video files stored in your iPodВ®/
iPhoneВ®. Touch the Music list box to search for music grouped by playlists, artists,
albums, songs, genres, composer or podcast. Touch the Video list box to search
for videos grouped by movie, music videos, TV shows, video podcasts, rentals, and
video playlists. Photos are displayed by using the iPodВ®/iPhoneВ® to control and
select photos.
1. i Pod icon: Touch to view the SOURCE MENU and select a new playback
source.
2.
/ indicator: Indicates whether media is playing or paused.
3. 2/23 indicator: File number and total number of files on the disc.
4. EQ
icon: Touch for quick access to Equalizer level settings menu.
5. Clock: Displays the time as entered by the user in the settings menu.
6.
Preview Window: Displays album art, if available.
7. Toggle (
) icon: Touch to toggle between menu page 1 and menu
page 2.
8. Next ( ) icon: Touch to play the next track.
9. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume
playback.
10. Previous ( ) icon: Touch to play the previous track.
11. icon: Touch to select a chapter/track directly using the on-screen display
direct entry menu display.
12. icon: Touch to return to a previous menu.
58
VM9216BT
Controls and Indicators
The on-screen indicators and touch key areas for iPodВ® playback are outlined
below.
1. i Pod icon: Touch to view the SOURCE MENU and select a new playback
source.
2.
/ indicator: Indicates whether media is playing or paused.
3. Equalizer setting indicator: Displays the current equalizer preset setting.
icon: Touch for quick access to Equalizer level settings menu.
4. EQ
5. Clock: Displays the time as entered by the user in the settings menu.
6. Repeat (
) icon: Indicates the repeat function is enabled.
7. Random (
) icon: Indicates the random function is enabled.
8. 2/23: File number and total number of files on the disc.
9. Song title, album, and performing artist.
10. 02.01: Elapsed playing time and playback progress bar for current file.
11. 04:20 Total playing time for current file.
12. Preview Window: Displays album art, if available.
13. Pandora icon: Touch to play Pandora radio. The Pandora app on your
iPhoneВ® /iPodВ® touch must be launched.
14. Repeat (
) icon: Touch to alter repeat mode as follows: Repeat Single >
Repeat Folder > Repeat All > Repeat Off
15. Random (
) icon: Touch to alter random mode as follows: Random On >
Random Off
16. Next ( ) icon: Touch to play the next track.
17. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume
playback.
18. Previous ( ) icon: Touch to play the previous track.
59
VM9216BT
Controlling Your iPodВ®
Touch the MENU button to access the main iPodВ® menu. Use the touchscreen to
navigate the iPodВ® menus.
Direct Track Entry
To select a track directly:
1. Touch the icon to display the Direct Entry Menu.
2. T ouch to select a chapter/track directly using the direct entry menu by
entering the desired track number.
3. Touch OK to play the selected file. To exit the screen without changing the file,
touch the large X. To clear your entry and start over, touch the small x.
NOTE: To transmit the video from your iPodВ® to the VM9216BT screen, you must set
the following options through the iPodВ® video settings menu:
TV Out = On, TV Signal = NTSC, and Widescreen = On.
NOTE: After disconnecting your iPodВ®, the VM9216BT will always return to the last
mode accessed when the iPodВ® is plugged back into the unit.
60
VM9216BT
PANDORA RADIO OPERATION
Pandora Radio is available via your iPhoneВ® (data usage will occur) or
iPodВ® touch (Wi-Fi).
NOTE: For basic iPodВ®/ iPhoneВ® connectivity, you can use the white 30-pin to USB
iPod cable that came with your Apple device . For iPodВ® video or photo playback,
you must purchase the jLink-USB cable.
NOTE: The Pandora app must be installed on your iPhoneВ®/iPodВ® touch.
Pandora Radio TFT Display
The on-screen indicators and touch key areas for Pandora Radio functions are
outlined below.
1. P
andora icon: Touch to view the SOURCE MENU and select a new playback
source.
2. or indicator: Indicates whether Pandora Radio is playing ( )
or paused ( ).
3. Equalizer setting indicator: Displays the current equalizer preset setting.
4. EQ
icon: Touch for quick access to Equalizer level settings menu.
5. Clock: Displays the time as entered by the user in the settings menu.
6. Playback Information Display: Displays station, track, artist, album, and
elapsed time information.
7. Pandora Preview Window: Displays album art, if available.
8. iPod icon: Touch to return to the iPodВ® mode of operation.
9. Next icon: Press this icon skip a song, subject to the skip limit.
10. Play or Pause icon: Press the icon to begin playback. Press the icon to
pause playback.
61
VM9216BT
11. Thumbs Up icon: Press this icon to tell Pandora “you like this track” and
bring in more tracks like it to your station.
12. Book Mark icon: Touch to display the Add Bookmark submenu to bookmark a
new song or artist.
13. Thumbs Down icon: Press this icon to tell Pandora to not play this track.
Pandora will skip to the next track. If the skip limit has been reached, Pandora
will continue to play but your feedback will be recorded.
14. List icon: Touch this icon to access the Station List Screen.
Bookmark Submenu
• Touch the Bookmark this Track icon to bookmark a track.
• Touch the Bookmark this Artist icon to bookmark an artist.
• Touch the Cancel icon to return to the Pandora Radio screen.
62
VM9216BT
Station List Screen
The Station List Screen allows you to search for music by the stations you created.
• Touch a station on the list to choose that station.
• Touch the Scroll Down (q) icon to view the next page in the list or the
Scroll Up (p) icon to view the previous page.
63
VM9216BT
To Start/Stop Pandora Radio
1. L aunch the Pandora app on your iPhoneВ®/iPodВ® touch. The Pandora icon
appears on the Main Menu Screen.
2. Touch the Pandora icon. The Pandora Screen appears.
3. Touch the icon to begin playback or the icon to pause playback..
4. Touch the iPod icon to exit Pandora and return to the iPod Screen.
5. Touch the Pandora icon to return to Pandora Radio.
64
VM9216BT
Pandora Radio Error Messages
The Pandora Radio error messages are listed in Table 8.
Table 8: Pandora Radio Error Messages
Error
Solution
BookMark Track Error
The track could not be bookmarked, please try
again in a moment.
BookMark Artist Error
The artist could not be bookmarked, please try
again in a moment.
Thumbs Up / Down Error
“Error Track Rating”
Song feedback could not be sent, please try
again in a moment.
No Active Station Error
This account has no stations in it. Please visit
Pandora.com and login to your account and
add stations.
Skip Limit Reached
Please note that Pandora limits skips to a
maximum of six skips per station, per hour.
65
VM9216BT
BLUETOOTH OPERATION
BluetoothВ® was launched by a special interest group (SIG) comprised of Ericsson
Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed
by nearly 2,000 companies worldwide. The BluetoothВ® word mark and logos
are owned by the Bluetooth SIG, Inc. and any use of such marks by Audiovox
Corporation is under license. Other trademarks and trade names are those of their
respective owners.
BluetoothВ® technology has the capability to wirelessly synchronize and transfer
data among devices. The BluetoothВ® audio capabilities can be used for mobile
phones hands free applications. BluetoothВ® has many profiles and the unit is
compatible with most BluetoothВ® enabled mobile phones. Before attempting to
use the BluetoothВ® functions on the unit, please make sure your mobile phone
supports BluetoothВ® functions.
NOTE: The line-of-sight distance between this unit and your mobile phone must be
8 feet (2.4 meters) or less for sending and receiving voice and data via BluetoothВ®
wireless technology.
Please make sure your mobile phone supports BluetoothВ® functions (Headset
or Handsfree profiles or both). Adhere to the following guidelines for successful
operation:
• Before using Bluetooth® functions, you must pair your mobile phone to
the VM9216BT head unit (see “Pairing the Bluetooth® System with Your
Mobile Phone and Head Unit”). To ensure the best reception for pairing and
reconnection, please make sure the phone battery is fully charged before you
begin.
• Try to perform pairing within a few minutes of the phone being turned on.
• Once the unit has been paired with the phone, the unit’s model number,
“VM9216BT”, will be displayed on the mobile phone.
• To achieve the best performance, always keep the mobile phone within
3 meters of the head unit.
• Always keep a clear path between the mobile phone and the head unit. Never
place a metal object or any other obstacle between the mobile phone and the
head unit.
• Some mobile phones (like Sony Ericsson) may have a “Power Saving Mode”
option. PLEASE DO NOT use the power saving mode with the VM9216BT.
• Before accepting or making a call, make sure your mobile phone’s “Bluetooth
function” is turned on.
• To ensure the best conversation quality/performance, stay within one meter of
the microphone when talking.
• To “disconnect” the mobile phone from the head unit, turn the Bluetooth®
connectivity off on the mobile phone or touch the button.
66
VM9216BT
Bluetooth User Interface
The on-screen indicators and touch key areas for BluetoothВ® functions are outlined
below.
T icon: Touch to view the SOURCE MENU and select a new playback source.
B
Equalizer setting indicator: Displays the current equalizer preset setting.
EQ
icon: Touch for quick access to Equalizer level settings.
Clock: Displays the time as entered by the user in the settings menu.
/
indicator: Indicates whether the unit is disconnected/connected with
a BluetoothВ®device.
6. Pair icon: Touch to initiate the pairing process with a BluetoothВ®device.
7. Options icon: Touch to configure BluetoothВ® parameters and options. Refer to
the Options screen for further details.
8. BT Audio icon: Touch to access the BluetoothВ® music function.
9. Phone icon: Touch to access the phone call menu.
10. icon: Touch to return to a previous menu.
1.
2.
3.
4.
5.
67
VM9216BT
Hands Free Profile (HFP)
To use a mobile phone with this unit, it is necessary to first establish a connection
using BluetoothВ® wireless technology. The connection is normally established
using Hands Free Profile (HFP), which gives you full control of functions available
on the telephone source. However, depending on your phone, the connection
may be made using Head Set Profile (HSP), making some functions unavailable.
This is a limitation of your phone, not the VM9216BT.
Since there are a number of BluetoothВ® mobile phone implementations available
on the market, operations with your BluetoothВ® mobile phone using this unit vary
greatly. Please refer to the instruction manual that came with your BluetoothВ®
mobile phone along with this manual while operating your phone with this unit.
Pairing Your Mobile Phone with the Head Unit
Your mobile phone can initiate a search for new devices and pair to the unit. The
following procedure describes the pairing process.
NOTE: The following procedures are generic. Procedures for pairing mobile phones
may vary slightly from phone manufacturer to phone manufacturer.
1. Press the SRC button on the front panel to access the source menu.
2. Touch the BT icon on the source menu and the BluetoothВ® user interface
screen will appear.
3. Touch the Options icon and the following screen will appear.
4. On the Options submenu set the Bluetooth function to ON.
5. On the Options submenu set the Connect function to ON.
6. Press the “Pair” button on the head unit’s Bluetooth® user interface screen.
7. Access the mobile phone BluetoothВ® function and set the function to ON.
8. Set the mobile phone BluetoothВ® discover mode to ON.
NOTE: Some discovery modes have a time limit (usually a minute) before they are
automatically turned off.
9. Use the mobile phone’s add a new device feature. A device or devices will
appear on your mobile phone display.
68
VM9216BT
10. A prompt to pair or bond should appear on your mobile phone. Accept the
request and initiate the process.
NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your
phone requires a pass key or pairing code, you will need to enter this number. The
default pairing code for many wireless phones is “0000”. The default code for the
unit is “1234”.
11. A prompt to enter a PIN number or passkey for the unit should appear. The
default passkey for the unit is “1234”.
12. At this point a prompt stating that pairing is successful should appear.
Another prompt should appear asking connect to the unit, Yes or No. Press
Yes. The mobile phone and the unit should connect. The mobile phone should
display a message similar to “Device Connected.” The mobile phone and the
unit are now connected. VM9216BT will appear on the mobile phone list of
devices.
Managing Incoming Calls
When connected to a BluetoothВ® phone, the unit will mute audio output, pause
CD play, and change to the Bluetooth screen below when a call is received. The
incoming phone number or as-signed name for that number will appear in the top
of the screen. An audible tone will sound from the unit and a graphic display will
appear on the front panel. If the incoming call has no caller ID, the unit will display
“Private Caller”.
1. D
irect Entry icon: Touch to access the direct dial screen. Refer to the Direct
Entry screen for further detail.
2.
icon: Touch to answer an incoming call.
69
VM9216BT
3. T
ransfer Call icon: Touch to transfer a call back to the mobile phone.
4. Mute icon: Touch to mute the microphone audio from the unit. Touch the icon
again to restore the microphone and audio from the unit.
5.
icon: Touch to end an in coming call.
icon: Touch to return to a previous menu
6.
Answering an Incoming Call
Touch the icon. For best reception, speak loudly and clearly into the
microphone. To end the conversation, touch the
icon.
Rejecting an Incoming Call
Press the Transfer Call icon to reject an incoming call. The call will revert to your
mobile phone and be left for voice mail.
Volume Control
To increase or decrease the volume level of an incoming call, turn the rotary knob
on the front panel or press the VOL+/ VOL- buttons on the remote control.
Audio Mute
To mute the phone call audio from the unit when a call is received, press the front
panel rotary knob. Press the front panel rotary knob again and phone call audio
will be restored to the unit.
70
VM9216BT
Making an Outgoing Call
Outgoing calls can be performed by touching the Direct Entry icon and using the
unit’s touch screen keypad.
Direct Dialing
1. Touch the Direct Entry icon and the following screen will appear:
2. U
sing the keypad, touch 0-9,* or # to enter the phone number you wish
to dial. If you enter an incorrect number touch the
icon to delete the
incorrect number.
3. Once the correct number appears on the screen touch the icon. To exit the
direct entry screen touch the X.
4. To end the call touch the
icon on the previous screen.
71
VM9216BT
Call Transfer
While talking, to transfer audio from the unit back to the wireless phone, touch
the Transfer Call icon. You can only transfer a call after it has been answered.
Touching the Transfer Call icon again will return the audio from the mobile phone
to the unit. Touch the Transfer Call icon and the following screen will appear:
72
VM9216BT
Bluetooth Music Function (BT Audio/A2DP)
Bluetooth provides an Advanced Audio Distribution Profile (A2DP) profile for
streaming music from a wireless phone or a portable multimedia player (PMP),
sometimes referred to as a MP3 player. The unit allows you to play back audio files
from your wireless phone or a PMP using a Bluetooth connection.
NOTE: Please quit A2DP mode before attempting to make a phone call, as
unexpected results may occur depending on your wireless phone model.
The unit can control a Bluetooth audio player via Advanced Audio Distribution
Profile (A2DP) or Audio/Video Remote Control Profile (AVRCP). Bluetooth audio
players (or Bluetooth adapters) compatible with these profiles can be connected
to this unit. Touch the BT Audio icon and the following screen will appear:
While listening to audio the following functions are available:
1. Pause/Play (
) icon: Touch to pause playback. Touch again to resume
playback.
2. Previous (
) icon: Touch to play the previous track.
3. Next (
) icon: Touch to play the next track.
4. Touch the Stop ( ) icon to stop playback .
73
VM9216BT
Functionality varies depending on the profile used:
• A2DP: Stream audio from your Bluetooth compatible audio player and listen to
the music through the unit.
• AVRCP: Play back, pause, select songs, etc. while streaming audio from your
Bluetooth compatible audio player to the unit.
NOTE: Song information (e.g. elapsed playing time, song title, song index, etc.)
cannot be displayed on this unit. Since there are a number of Bluetooth audio
players available on the market, operations with your Bluetooth audio player using
this unit vary greatly. Please refer to the instruction manual that came with your
Bluetooth audio player.
When there is an incoming call, the song will be paused. After the incoming call
is finished, the screen will return to the music function screen and playback will
continue.
74
VM9216BT
SiriusXMВ® RADIO OPERATION
Everything worth listening to is on SiriusXMВ®, getting over 130 channels,
including the most commercial-free music, plus the best sports, news, talk and
entertainment. A Vehicle Tuner (sold separately) and subscription are required. For
more information, visit www.siriusxm.com.
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc.
and its subsidiaries. All other marks and logos are the property of their respective
owners. All rights reserved.
Activating SiriusXMВ® Radio
Satellite Radio operation requires the connection of an optional Vehicle Tuner and
antenna (sold separately). To connect the Vehicle Tuner, follow the instructions
provided with the tuner.
To listen to Satellite Radio, a subscription is required.
Activate the Vehicle Tuner using one of the two methods below:
• Online: Go to www.siriusxm.com and choose ACTIVATE RADIO.
• Phone: Call 1-800-XM-RADIO (1-800-967-2346).
Activation typically takes 10-15 minutes, but may take up to an hour. It is
recommended to leave your vehicle on until the “Subscription Updated” message
appears.
Retrieving the Radio ID Code
The Satellite Radio Subscription requires that the Radio ID be retrieved. To display
the Radio ID:
1. Touch the Direct icon. The Direct Entry Menu appears.
2. Tune to channel “0” using the on-screen number pad.
3. Touch the check mark to enter your selection. The screen displays the ID
where the channel name is displayed.
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
button on the remote
control to load the display panel back into the compartment.
75
VM9216BT
SiriusXMВ® User Interface
The on-screen indicators and touch key areas for SiriusXMВ® functions are outlined
below.
Menu
Page 1
Menu
Page 2
1. S
XM icon: Touch to view the SOURCE MENU and select a new playback
source.
2. Band indicator - Displays SiriusXMВ® radio band currently selected.
3. Equalizer setting indicator: Displays the current equalizer preset setting.
4. EQ
: Touch for quick access to the Equalizer level settings menu.
5. Signal Strength indicator : As the strength of the satellite radio signal
increases, the number of illuminated segments will increase.
6. Clock: Displays the time as entered by the user in the settings menu.
7. More icon: Touch to go to Menu Page 2.
8. Next (
) icon: Touch to tune to the next channel.
9. Category/Channel icon: Touch to toggle the icon displayed between
Category and Channel.
10. Previous (
) icon: Touch to tune to the previous channel.
11. List icon: When the Category icon is displayed, touch List to go to the
Category Screen. When the Channel icon is displayed, touch List to go to the
Channel Screen.
12. Direct icon: Touch to display the Direct Entry Menu.
13. Back icon: Touch to go to Menu Page 1.
14. Options icon: Touch to go to the SXM Parental Lock Menu.
76
VM9216BT
15. Mem icon: Touch to display screen used to enter current channel into preset
memory.
16. Scan icon: Touch to scan to the next available channel. The tuner will pause
for approximately five seconds at that channel. Touch scan again to listen to
that channel. If scan is not touched, the tuner will automatically seek the next
channel.
17. Band icon: Only six preset channels will display at a time. Touch this icon to
display the next band of preset channels. Three bands are available: Band 1,
Band 2, and Band 3.
77
VM9216BT
Switching to SiriusXMВ® Radio
• Touch the top left corner of the screen (the radio box) to view the SOURCE
MENU. Touch the “SiriusXM” icon.
• Press the SRC button on the front panel to switch to the SXM source.
Selecting the SiriusXMВ® Band
Touch the Band icon on the screen to change between the following bands:
Band1, Band2, and Band3.
Seek Tuning
• To seek the next higher channel, touch the
• To seek the next lower channel, touch the
icon.
icon.
Direct Tuning
To enter a SiriusXMВ® radio channel directly:
1. Touch the Direct icon to display the DIRECT ENTRY MENU.
2. E nter the desired SiriusXMВ® radio channel using the on-screen number pad. If
you wish to delete an entry number touch the
icon.
3. Touch the check mark icon to tune to the selected channel. To exit the screen
without changing the channel, touch the X icon.
78
VM9216BT
Using Preset Stations
Six numbered preset buttons store and recall channels for each band. All six stored
channels for the current band appear on the screen.
Storing a Channel
1. Select a band (if needed), then select a channel.
2. Touch the on-screen Mem icon to access the Preset Screen.
3. T ouch the preset number (P1 through P6) in which you would like to store the
current channel (or touch Exit to cancel and close the menu). The channel is
displayed at the top of the menu. The preset number will appear highlighted.
The channel will be displayed on the front panel of the tuner screen.
Recalling a Channel
1. Select a band (if needed).
2. Touch an on-screen preset button to select the corresponding stored channel.
79
VM9216BT
Searching for a Channel
Search by Channel
To search by channel:
1. On the SirusXMВ® menu page, touch the Category/Channel icon (if needed) to
select Channel.
2. Touch List to go to the Channel Screen. The following screen appears.
3. Touch a channel to tune to that channel.
Search by Category
Categories group music by type such as jazz, rock, classical, etc. To search by
category:
1. On the SirusXMВ® menu page, touch the Category/Channel icon (if needed) to
select Category.
2. Touch List to go to the Category Screen. The following screen appears.
3. Touch a category item. A channel list screen appears.
4. Touch a channel to tune to that channel.
80
VM9216BT
Parental Lock Options
The SXM Parental Lock Menu allows you to block access to individual channels or
mature channels.
Lock Current Channel:
Individual channels may be locked. The Lock Current Channel option allows you
the ability to lock a certain channel. Locking does not allow the SiriusXMВ® tuner to
access that channel’s audio or metadata.
To lock a channel:
1. Tune to a channel.
2. Touch the Options icon to enter the SXM Parental Lock Menu.
3. Touch the blue box adjacent to Lock Current Channel.
4. Enter your password using the on-screen number pad.
5. Touch the check mark to enter your password. The channel is now locked.
Change Lock Password:
The Change Lock Password option allows you to change the password from the
default or current custom password to another password.
NOTE: The default password is 1, 2, 3, 4.
To change a password:
1. Touch the Options icon to enter the SXM Parental Lock Menu.
2. Touch the blue box adjacent to Change Lock Password.
3. Enter the old password using the on-screen number pad and touch the check
icon.
4. Enter the new password using the on-screen number pad and touch the check
icon. The new password is set.
NOTE: The “Master Unlock” code is 8, 8, 8, 8. if you lose or forget your custom
password, use this code to change a password.
81
VM9216BT
Unlock All Channels:
The Unlock All Channels option unlocks all (individual and mature) locked
channels.
To unlock all channels:
1. Tune to a channel that is not locked (for example Channel 1, preview channel).
2. Touch the Options icon to enter the SXM Parental Lock Menu. The Unlock All
Channels choice will be enabled.
3. Touch the blue box adjacent to Unlock All Channels.
4. Enter your password using the on-screen number pad.
5. Touch the check mark to enter your password. The channels are now
unlocked.
When the global “Mature Lock” is enabled, a mature channel can be temporarily
unlocked ONLY until the key is cycled. Once the radio is powered on again, the
channel will be locked again.
This mode is useful for listening to mature/adult content on a temporary basis,
allowing you to listen on a channel-by-channel basis without having to disable the
global “Mature Lock” of all mature channels.
If a channel is locked and is labeled “Mature” by SXM then the Unlock All
Channels option is changed to Unlock Current Channel to allow you to
temporarily unlock a mature channel.
To unlock a mature channel:
1. Touch the Options icon to enter the SXM Parental Lock Menu. The Unlock
Current Channel choice will be enabled.
2. Touch the blue box adjacent to Unlock Current Channel.
3. Enter your password using the on-screen number pad.
4. Touch the check mark to enter your password. The channel is now unlocked.
Lock Mature Channels:
SiriusXMВ® attaches a label to channels with adult content. The radio recognizes
these channels as “Mature”. The Lock Mature Channels option allows you to lock
out channels with “Mature” labels. These channels will still appear in the channel
listing (with a lock symbol), but will not be tunable unless the parental lockout
password is correctly entered.
To lock mature channels:
1. Touch the Options icon to enter the SXM Parental Lock Menu.
2. Touch the blue box adjacent to Lock Mature Channels.
3. Enter your password using the on-screen number pad.
4. Touch the check mark to enter your password. The mature channels are now
locked.
82
VM9216BT
REAR CAMERA OPERATION
(if equipped)
This unit is “camera ready.” Before accessing any camera features, you must install a
rear video camera.
When the camera is not installed and the function is accessed by the gear
selector being placed in reverse or by the unit’s menu, the message “VIDEO NOT
DETECTED” will appear, indicating the function is not available.
When the camera is installed, the rear view image of what is behind the vehicle
will appear when the vehicle is placed in reverse gear. When leaving reverse gear,
the unit displays the previous screen.
The rear camera image can be adjusted from Normal to Mirror using the “Setup”
menu (“see Hardware Sub-menu Features”).*
83
VM9216BT
TROUBLESHOOTING
Table 9: Troubleshooting
Problem
Cause
Corrective Action
Radio Fuse blown
Install new fuse with correct
rating
Car battery fuse blown
Install new fuse with correct
rating
Illegal operation
Press the RESET button
located in the bottom right
corner of the front panel
Improper audio output
connection
Check wiring and correct
Volume set too low
Increase volume level
Improper “MUTE”
connection
Review wiring diagram and
check “MUTE” connection
Speakers damaged
Replace speakers
Heavily biased volume
balance
Adjust the channel balance
to the center position
Speaker wiring is in
contact with metal part
of car
Insulate all speaker wiring
connections
Pirated disc is in use
Use original copy
Speaker power rating
not compatible with
unit
Connect proper speakers
Speaker is shorted
Check speaker contact
Incorrect connection
between ACC and
positive battery wire
Check wiring and correct
GENERAL
Unit will not power on
No/low audio output
Poor sound quality or
distortion
Unit resets itself when
engine is off
TFT MONITOR
Monitor does not
open automaticallyf
TFT Auto Open is turned Turn TFT Auto Open on
off
No image
Incorrect connection to
parking brake wire
Check wiring and correct
Parking brake is not
engaged
Stop vehicle in safe place
and apply parking brake
84
VM9216BT
Problem
Cause
Corrective Action
Flashing image or
interference appears
on screen
DVD is not compatible
with current TV system
settings
Change setup to
accommodate disc
Improper video signal
connections
Check wiring and correct
Prolonged image or
improper height/
width ratio display
Improper aspect ratio
setup
Use correct aspect ratio
setting
Monitor stops at
incorrect position
Moving path is blocked
Press OPEN key to restart
monitor movement
TUNER
Weak station
searching
Auto antenna is not fully Connect the auto antenna
extended
control cable properly
Auto antenna not
properly connected
Connect the auto antenna
control cable properly
LOCAL function is
activated
Turn LOCAL function off
Cannot insert disc
Disc already inside unit
Eject current disc and insert
new one
Image blurred,
distorted, or dark
Disc is illegally copied
Use original disc
Disc does not play
back
Disc is warped or
scratched
Use disc in good condition
Disc is dirty or wet
Clean disc with soft cloth
Laser pickup is dirty
Clean laser pickup with
cleaning disc
Incompatible disc is
used
Use compatible disc
Disc rating exceeds
Parental Lock rating
limit
Change Parental Lock
settings to lower restriction
Disc region code is not
compatible with unit
Use disc with proper region
code
Disc is inserted upside
down
Insert disc with label side up
DISC
85
VM9216BT
Problem
Cause
PBC cannot be used
during VCD playback
PCB is not available on
the disc
No repeat or searching PCB is on
while playing VCD
Corrective Action
Turn PCB off
MP3
Interruption occurred
during playback
86
Disc is dirty or scratched Clean disc or replace
File is damaged/bad
recording
Recreate disc with good files
VM9216BT
Error Messages
Table 10: Error Messages
Message Displayed
Cause
Loading
Disc is being read
No Disc
Disc is dirty
Clean disc with soft cloth
Disc is upside down
Insert disc with label side
up
Disc not present in
loading compartment
Insert disc
Disc is dirty
Clean disc with soft cloth
Disc is upside down
Insert disc with label side
up
Bad Disc
Unknown disc
Disc format is not
compatible with this unit
Region Error
DVD is not compatible
with region code of unit
Error
Illegal mechanism
operation
Corrective Action
Press EJECT key for 5
seconds to reset loading
mechanism
87
VM9216BT
CARE AND MAINTENANCE
1. U
se only a clean silicone cloth and neutral detergent to clean the front panel
or monitor. A rough cloth and non-neutral detergent (such as alcohol) may
result in scratching or discoloration.
2. Do not get water or cleaning fluids on the unit.
3. If the temperature inside the player gets too hot, a protective circuit
automatically stops play of the disc. If this occurs, allow the unit to cool before
operating the player again.
4. Never insert anything other than a 5” (12 cm) compact disc into the player as
the mechanism can be damaged by foreign objects.
5. Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or
without an adaptor, as damage to the player and/or disc may occur. Such
damage is not covered by the Warranty on this product.
6. The CD player may not operate properly in extreme hot or cold. If such
conditions occur, allow the interior of the vehicle to reach a normal
temperature before using player.
7. When the vehicle warms up during cold weather or under damp conditions,
condensation may appear on the TFT panel. Should this occur, the screen will
not operate properly until the moisture has evaporated.
8. We suggest you use a cleaning disc in this unit more frequently than in the
unit in your home due to the environmental conditions of the vehicle.
88
VM9216BT
SPECIFICATIONS
DVD/CD Player
Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW
Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2
Signal to Noise Ratio: >95dBA
Dynamic Range: >95dB
Frequency Response: 20Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 kHz
D/A Converter: High performance 24-bit / 192 kHz sample rate, Multi-Bit SigmaDelta Modulator
Video
Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm)
Input: 1Vp-p (75-ohm)
FM Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity (-30dB): 9dBf
Quieting Sensitivity (-50dB): 15dBf
Alternate Channel Selectivity: 70dB
Signal to Noise Ratio @ 1 kHz: 58dB
Image Rejection: 80dBStereo Separation @ 1 kHz: >30dB
Frequency Response: 30Hz - 15 kHz, -3d
AM Tuner
Tuning Range: 530 kHz - 1720 kHz
Sensitivity (-20dB): 15uV
Signal to Noise Ratio @ 1 kHz: 50dB
Image Rejection: 60dB
Frequency Response: 50Hz - 2 kHz, -3dB
89
VM9216BT
Monitor
Screen Size: 7.0” (Measured diagonally), 16:9 Widescreen
Screen Type: TFT Liquid Crystal Display (LCD) active matrix
Resolution: 336,960 sub pixels, 1440 (W) X 234 (H)
General
Auxiliary Input impedance: 10k
Power Supply: 11 to 16VDC, negative ground
Power Antenna (Blue): 500mA max, current limited protection
Amplifier Remote (Blue/White): 500mA max, current limited protection
Operating Temperature: -20C ~ 65C
Fuse: 15-amp, mini ATM type
DIN chassis dimensions: 7” X 7” X 2” (178mm x 178mm x 50mm)
CEA Power Ratings
Power Output: 13 Watts RMS x 4 channels into
4-Ohms @ < 1% THD+N
Signal to Noise Ratio: 70dBA below reference
(Reference: 1 Watt, 4-Ohms)
Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux
Input used as reference input)
Reference Supply Voltage: 14.4VDC
*Specifications subject to change without notice.
90
VM9216BT
COMMON REPLACEMENT PARTS
Owners Manual, Install Manual and
Quick Start Guide
30613800
Wire Harness
30313800
Microphone
30443240
Remote Control
30713620
Trim Ring
30413580
Sleeve
30113580
Hardware Bag
30513030
91
Audiovox Electronics Corporation
Hauppauge, NY 11788
Technical Assistance: 1-800-323-4815
www.jensenmobile.com
В© 2012 Audiovox
Printed in China
128-9177
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement