null  null
RFC-IA9528 F-GX
RANGE COOKER
Dear Customer:
Thank you for choosing our product.
This appliance is easy to use; please read this manual carefully before installing and using the
appliance. The correct indications in the manual are for the best installation, use and care of the
appliance.
You will find that the clean lines and modern look of your oven blends in perfectly with your kitchen
decor. The oven is easy to use and performs to a high standard.
We also make a range of products that will enhance your kitchen - such as cook tops, Range hoods,
built- in hobs, built- in ceramic hobs and built- in ovens. These are models to complement your new
oven.
We make every effort to ensure that our products meet all your requirements. Our customer relations
department is at your disposal to answer all your questions and to listen to all your suggestions.
Please complete the warranty section of this manual and keep your receipt as proof of purchase.
Also please retain all documents related to the purchase of the product.
We are committed to provide increasingly efficient products that are easy to use, respect to
environmentally friendly, attractive and reliable.
1
Index
CAUTIONS
pag.3-4
Instructions for installation:
Dimensions and installation features
Electrical connection
Ventilation and gas connection
Adaptation to different types of gas
Setting the minimum flame
Burner and injector characteristic table
pag. 5
pag. 6
pag. 6
pag. 7
pag. 7
pag. 9
Instructions for use
Description of the main parts of the appliance
Ignition and operation of the burners
Advice on the use of gas burners
Oven function
Electronic programmer
pag. 10
pag. 11
pag. 11
pag. 12
pag. 13
Instructions for cooking
pag. 15
Maintenance and cleaning
pag. 17
2
CAUTIONS:
This appliance shall be installed in accordance with the regulations in force and only used in a well
ventilated space. Read the instructions before installing or using this appliance.
l
Very important: keep this instruction booklet with the appliance for handy references
l
This appliance is designed for use in private home. Please be aware that the front accessory could be not
to touch.
l
This appliance is not intended for use by young children .
l
Don't touch the heating elements inside the oven.
l
When the grill is on all the accessible elements are hot, hence, keep children away from these elements.
l
This appliance shall be installed only by authorised persons and in accordance with the manufacturer's
Installation instructions, local gas fitting regulations, municipal building codes electrical wiring
regulations,and local water supply regulations.
l
Before switching the appliance on check that it is correctly regulated for the type of gas available (see
relevant section).
Do not use jet of steam for cleaning.
l
Before maintenance or cleaning, disconnect the appliance from the mains and wait for it to cool down.
l
When the burners are lit check that the flame is always regular. Before removing the saucepans turn the
burners off.
l
Servicing should be carried out only by authorised personnel.
l
The use of a gas appliance produces heat and humidity in the room . Make sure that the room is well
ventilated, keeping the natural ventilation outlets open or installing a ventilation hood with rain duct.
l
If a gas appliance is used for a long time it may require extra ventilation (opening a window or increase
the volume of exhaust).
l
Never line the oven with aluminium sheets as the slots preset for keeping fast the thermic exchange may
clog, thus damaging the enamel.
l
Be careful not to place saucepans with unstable or deformed bottoms on the burners to avoid overturning
or spilling .
l
If the mains of a burner is turned off accidentally, turn off the control knob. Only light the oven again
after waiting at least a Minute.
Before using the oven, we suggest to:
l
Remove all the special film covering the oven door glass (when provided)
l
Heat the empty oven at max. Temperature for 45 minutes (to remove unpleasant smell and smoke caused
by working residues and by the thermal insulation)
l
Carefully clean inside the oven with soapy water and rinse it .
l
For any repairs always contact an authorised Technical Customer Service Centre and ask for original
spare parts. Repairs by untrained people can lead to damage.
l
Keep packaging out of reach of children at all times.
l
Always use oven gloves to remove and replace food in the oven. Ensure that you support the grill pan
when removing it from the oven.
l
Don't let children sit down or play with the oven door.Do not use the drop down door as a stool to reach
cabinets above.
l
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
l
DO NOT STORE OR USE FLAMMABLE LIQUIDS OR ITEMS IN THE VICINITY OF THIS
APPLIANCE.
l
WHERE THIS APPLIANCE IS INSTALLED IN MARINE CRAFT OR IN CARAVANS, IT SHALL NOT
BE USED AS A SPACE HEATER .
l
Do not remove the plup by pulling the cable.
WARNING: In order to prevent tipping of the appliance, this stabilizing means must be installed. Refer to the
instructions for installation.During use the appliance becomes hot. Care should be taken to avoid touching
heating elements inside the oven.
WARNING: Accessible parts may become hot during use. Young children should be kept away.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch
the surface, which may result in shattering of the glass. This appliance is not intended for use by persons
(including children) with reduced physical,sensory or mental capabilities, or lack of experience and
3
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.Children should be supervised to ensure that they do not play with the
appliance.
l
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard. In the event of burner flames being accidentally
extinguished,turn off the burner control and do not attempt to re-ignite the burner for at least 1 min.
l
Note:These instructions are only valid if the country symbol appears on the appliance. If the symbol does
not appear on the appliance, it is necessary to refer to the technical instructions which will provide the
necessary instructions concerning modification of the appliance to the conditions of use of the country Gas
appliance
Warning:
Never use the food-warmer drawer set at the bottom of the range to store
inflammable substances or matters that cannot withstand heat such as:
Wood, paper, spray cans, rags, etc.
This electric appliance complies with the following directives:
-89/336/EEC (electromagnetic compatibility)
-89/109/EEC (foodstuffs)
-73/23/EEC + 93/68/EEC (low voltage)
-2009/142/EC ( Gas Appliance Directive)
4
Instructions for Installation
DIMENSIONS AND INSTALLATION FEATURES
Warning:
a) Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and
the adjustment of the appliance are compatible;
b)The adjustment conditions for this appliance are stated on data plate;
c) This appliance is not connected to a combustion products evacuation device. It shall be installed and
connected in accordance with current installation regulations. Particular attention shall be given to the
relevant requirements regarding ventilation.
Nominal volume of the oven
105lt
The cooker is supplied with an anti-tilting chain to prevent the appliance
from tilting forward and accidental damage to the gas pipe. Take the
expansion with hook and make an adequate hole in the wall behind, at the
same height as the chain fixing area. Insert the plug into the hole and then
screw in the hook until it is firmly fixed to the wall. Fix the chain to the
hook. Adjust to level of the cooker inserting the feet provided.
For a situation where the appliance is between two cupboards and the anti tilt chain cannot be fitted we
suggest securing by screwing through the both sides of the cupboards into the sides of the cooker. The screws
should be
fitted as follows. Position the oven between the cupboards in it's final position, then mark the location of the
pilot hole inside the cupboard. Refer to the diagram below for the location of the pilot hole. Use 3.5mm
diameter drill bit to drill the pilot hole through the cupboard and both sides of the cooker. Before drilling,
check your measurements to ensure the pilot holes are located within the range specified in the diagram. A
drilled hole in the
side of the cooker which is outside the range specified may void the warrantee. Inspect cupboards thoroughly
before drilling to avoid damage to electrical wires or gas lines. Fix two 12 gauge x 40mm long self tapping
screws through the pilot holes inside both cupboards and into the side of the cooker.
Note! Screw length is based on cupboard thickness of 20mm, gap between cupboard and oven of 10mm.
Screw length could vary depending on cupboard material thickness and gap between oven and cupboards.
Note! The screws must be accessible for removal if the cooker requires service. Cupboards must not be built
over these screws.
Equipment type:
Insulation class:
free standing (class 1)
class 1
THE MANUFACTURER DECLINES ANY AND ALL RESPONSIBILITIES FOR DAMAGES TO THINGS
OR INJURIES TO PERSONS OR ANIMALS DERIVING FROM INCORRECT INSTALLATION OR USE
OF THE EQUIPMENT.
5
ELECTRICAL CONNECTION
The appliance is fitted with an approved 15 Amp flexible cord and plug which must be connected to a
correctly earthed socket outlet. The manufacturer is not liable for any direct or indirect damage caused by
faulty installation or connection. It is therefore necessary that all installation and connection operations are
carried out by qualified personnel complying with the local and general regulations in force.
The wire section on the cable must not be less
Than1.5mm 2(3×1.5cable).Use only the special
cables available at our service centers.
L
N
CONNECTION OF THE FEEDING CABLE TO THE MAINS
Connect the feeding cable to a plug suitable for the load indicated on the rating plate of the product. In case of
a direct connection to the mains (cable without plug), it is necessary to insert a suitable omnipolar switch
before the appliance, with minimum opening between contacts of 3 mm (the grounding wire should not be
interrupted by the switch).
Before connecting to the mains, make sure that:
The electrical counter, the safety valve, the feeding line and the socket are ade
quate towithstand the maximum load required(see rating plate).
The supply system is regularly grounded, according to the regulations in force.
The socket or the omnipolar switch can easily be reached after the installation
of the oven.
After carrying out the connection to the mains, check that the supplying cable
does not come into contact with parts subject to heating.
Never use reductions, shunts, adaptors which can cause overheating or burning.
The manufacturer is not liable for any direct or indirect damage caused by faulty installation or connection. It
is therefore necessary that all installation and connection operations are carried out by qualified personnel
complying with the local and general regulations in force.
Electrical features
Oven light
2× 25 W
Spit motor
4W
Upper heating element
2200W
Bottom heating element
1800W
Grill heating element
2900W
Circular heating element
2×1600W
Ventilator motor
2×30W
Cooling fan
11W
This appliance shall be installed only by authorised persons and in accordance with the manufacturer's
installation instructions, local gas fitting regulations, municipal building codes, electrical
regulations, local water supply regulations.
wiring
Ventilation
In general, the appliance should have adequate ventilation for complete combustion of gas, proper flueing
and to maintain temperature of immediate surroundings within safe limits.
Combustible Surfaces
Any adjoining wall surface situated within 200mm from the edge of any hob burner must be a suitable noncombustible material for a height of 150mm for the entire length of the hob. Any combustible construction
above the hotplate must be at least 600mm above the top of the burner and no construction shall be within
450mm above the top of the burner. Zero clearance is permitted on side and rear adjoining surfaces below the
hob.
Gas connection
The appliance must be connected to the gas supply or the cylinder according to the specifications of the
standards and after checking that it is adjusted for the type of gas available.
It's
The gas connection is male 1/2" BSP and is situated 55mm from the right and 560mm from the floor.
necessity of changing the flexible tube whenthe national conditions require it.
There are two ways to carry out
the connection to the main gas line:
A. The Cooker can be connected with the cuprum material . Loosen the tie-in down and connect one terminal
of the pipe with the gas elbow
6
between 1 - 1.2m long. The hose should not be subjected to abrasion, kinking or permanent deformation and
should be able to be inspected along its entire length. Unions compatible with the hose fittings must be used
The flexible tube shall be fitted in such a way that it cannot come into
and connections tested for gas leaks.
contact with a moveable part of the housing unit (e.g. a drawer)and does not pass through any space
susceptible of becoming congested
.The fixed consumer piping outlet should be at approximately the same
height as the cooker connection point, pointing downwards and approximately 150mm to the side of the
cooker. The hose should be clear of the floor when the cooker is in the installed position. Fix one end of the
chain on the screw next to the gas inlet connection and the other end should be anchored to the floor/wall so
that the chain prevents strain on the hose connections when he cooker is pulled forward.
The appliance is factory set for Natural gas. The test point pressure should be adjusted to 20mbar with the
Triple ring burner operating at maximum.
The appliance is set up to operate with the gas specified on the gas type label placed on the back of the
appliance.
To perform these operations the qualified installer will follow the indications given in the "Adaptation to the
various types of gas" section. For safer operation make sure that the supply pressure respects the values given
in the "Table of burner and injector characteristics".
If installing for use with LPG gas, ensure a gas regulator suitable for a supply pressure of 29mbar
is part of the
gas tank supply and the test point pressure is adjusted to 29mbar
.
If installing for use with TG gas, ensure a gas regulator suitable for a supply pressure of 8mbar
gas tank supply and the test point pressure is adjusted to 8mbar
.
is part of the
Once the appliance has been installed, make sure that the gas pipe is neither squashed or damaged by moving
parts.
Before Leaving - Check all connections for gas leaks with soap and water. DO NOT use a naked flame for
detecting leaks. Ignite all burners both individually and separately to ensure correct operation of gas valves,
burners and ignition. Turn gas taps to low flame position and observe stability of the flame for each burner
individually and separately. When satisfied with the operation of the cooker, please instruct the user on the
correct method of operation. In case the appliance fails to operate correctly after all checks have been carried
out, refer to the authorised service provider in your area.
Adaptation to different types of gas
When converting from Universal LPG to Natural Gas ensure that the LPG test point is removed and replaced
with the CE Approved NG Regulator supplied in this kit. The test point pressure must be adjusted to
20mbar with the largest burner operating on maximum flame.
When converting from Natural Gas to Universal LPG ensure that the NG regulator is removed and replaced
with the Test Point Assembly supplied in this kit. An CE Approved gas regulator suitablefor a supply pressure
of 29mbar should be part of the gas tank supply and the test point pressure must be adjusted to 29mbar.
To adapt the appliance to a gas different from that
for which it was set up (see gas type label inside
the warming compartment door) proceed as follows:
l
remove the grids
l
remove the burners caps and burner heads
l
with a 7 mm socket spanner unscrew and remove the injectors.
l
replace the injectors with those supplied corresponding to the
gas available (see burner and injector characteristics Table)
l
replace the various parts proceeding in reverse.
When converting from Natural Gas to LPG ensure that theNG regulator is removed and replaced with the Test
Point Assembly. A gas regulator suitable for a supply pressure of should be part of the gas tank supply and the
the pressure according to the data plate.
test point pressure should be adjusted to
Setting the minimum flame
The flame on the small output is regulated by the factory.
When the injectors have been replaced or there are special
mains pressure conditions, it may be necessary to regulate
the minimum flame again. The operations necessary to set
the minimum flame are as following:
l
light the burner ;
l
turn the knob to the minimum position ;
l
take out the knob (and gasket if there is one) ;
7
l
LPG TO NG:Use a thin blade screwdriver to turn the by-pass screw located above left of the gas
valve,shaft as shown right. Turn gently the by-pass screw clockwise to the end completely then turn it
anti-clockwise 1 turn for the Triple ring,7/8 turn for the Fish,3/4 turn for the Rapid,1/2 turn for the SemiRapid and 3/8 turn for the Auxiliary .
l
NG TO LPG: Use a thin blade screwdriver to turn the by-pass screw located above left of the gas valve
shaft as shown right.Turn gently the by-pass screw clockwise to the end.
l
LPG TO TG:Use a thin blade screwdriver to turn the by-pass screw located above left of the gas
valve,shaft as shown right. Turn gently the by-pass screw clockwise to the end completely then turn it
anti-clockwise 4 21 turn for the Triple ring, 187 turn for the Fish, 143 turn for the Rapid, 121 turn for the SemiRapid and 183 turn for the Auxiliary .
l
TG TO LPG: Use a thin blade screwdriver to turn the by-pass screw located above left of the gas valve
shaft as shown right.Turn gently the by-pass screw clockwise to the end.
l
NG TO TG:Use a thin blade screwdriver to turn the by-pass screw located above left of the gas
valve,shaft as shown right. Turn gently the by-pass screw clockwise to the end completely then turn it
anti-clockwise 3 21 turn for the Triple ring, 1 turn for the Fish, 1 turn for the Rapid, 1 turn for the SemiRapid and 1 turn for the Auxiliary .
l
TG to NG:Use a thin blade screwdriver to turn the by-pass screw located above left of the gas valve,shaft
as shown right. Turn gently the by-pass screw clockwise to the end completely then turn it anticlockwise 3 21 turn for the Triple ring, 1 turn for the Fish, 1 turn for the Rapid, 1 turn for the Semi-Rapid
and 1 turn for the Auxiliary .
l
put the knob back on and turn it quickly from the maximum position to the minimum position, checking
that the flame does not go out ;
l
for burners with safety valve make sure that the regulation obtained is sufficient to maintain heating of
the thermocouple. If it is not, increase the minimum
THE BURNERS REQUIRE NO REGULATION OF THE PRIMARY AIR.
ABNORMAL OPERATION
ANY OF THE FOLLOWING ARE CONSIDERED TO BE ABNORMAL OPERATION
AND MAY REQUIRE SERVICING:
l
Yellow tipping of the hob burner flame.
l
Sooting up of cooking utensils.
l
Burners not igniting properly.
l
Burners failing to remain alight.
l
Burners extinguished by oven door.
l
Gas valves, which are difficult to turn.
IN CASE THE APPLIANCE FAILS TO OPERATE CORRECTLY, CONTACT
THE AUTHORISED SERVICE PROVIDER IN YOUR AREA.
8
Burner and injector characteristic table Burner and injector characteristic table
Consumption(*)
LPG
Burner
I3B/P(30)
By pass
mm
I3+(28-30/37)
G30
I3B/P(50)
G30
G31
G30
Input Main Injector Input Main Injector
mm
mm
kw(g/h)
kw(g/h)
Input Main Injector
mm
kw(g/h)
3.0(218)
0.85
3.0(218)
0.85
3.0(214)
0.85
3.0
0.75(S)
Input
kw
Main Injector
mm
1
Rapid
2
Semi-rapid
0.34 1.75(127)
0.65
1.75(127)
0.65
1.75(125)
0.65
1.75
0.58(M)
3
Fish/BBQ
0.64 2.8(203)
0.85
2.8(203)
0.85
2.8(200)
0.85
2.8
0.70(X)
4
Auxiliary
0.29
1.0(72.7)
0.50
1.0(72.7)
0.50
1.0(71)
0.50
1.0
0.43(H2)
5
Triple ring
0.64
3.8(269)
3.8(264)
0.95
3.8
0.76(F4)
0.44
Test point pressure
0.95(F4)
3.8(269)
0.95(F4)
G30: 29mbar
G30: 29mbar
G30:50mbar
G31:37mbar
Consumption(*)
Natural gas
Burner
I 2H
By pass
mm
G20
Input Main Injector
mm
kw
Town gas
I 1a
I 2L
G25
Input Main Injector
mm
kw
Input
kw
2
2
G110
Main Injector
mm
1
Rapid
0.44
3.0
1.18(Y)
3.0
1.21(F2)
3.0
2.6(3)
2
Semi-rapid
0.34
1.75
0.97(Z)
1.75
0.94(Y)
1.75
1.9(2)
3
Fish/BBQ
0.64
2.8
1.15(Y)
2.8
1.21(F2)
2.8
2.6(14)
4
Auxiliary
0.29
1.0
0.72(X)
1.0
0.72(F1)
1.0
1.45(1)
5
Triple ring
0.64
3.8
1.40(S)
3.8
1.42(K)
3.8
3.5(13)
5
1
4
2
2
3
5
Test point pressure
G20:20mbar
G25:25mbar
G110:8mbar
(*) = With dry gas and with greater calorific power (Hs ) at 15 and 1013.26 mbar
Model
TOTAL HEAT:INPUT(Hs:(Qn)
IA9528F
11.1kW
IA9508F
11.1kW
IA6408F
8.3kW
F965T2S***
F965T3S***
F965FS***
9
4
Instructions for Use
(gas cooking top side)
Description of the main parts of the appliance
Waring:
1 This appliance shall be installed in accordance with the regulations in force and only used in a well
ventilated space(e.g. DO not use the appliance in the carbarn,basement and the room without windows, etc)
Read the instructors before installing or using this appliance.
2 The use of a gas cooking appliance results in the production of heat and moisture in the room in which it
is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a
mechanical ventilation device (mechanical extractor hood).
3 Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a
window,or more effective ventilation, for example increasing the level of mechanical ventilation where
present.
2
1
3
4
5
6
1 = grid
2 = burner cap
3 = burner head
4 = spark plug
5 = safety valve (for models equipped with a safety valve)
10
DESCRIPTION OF SYMBOLS
FRONT LEFT BURNER
FRONT CENTRAL BURNER
REAR LEFT BURNER
REAR CENTRAL BURNER
FRONT RIGHT BURNER
LEFT CENTRAL BURNER
REAR RIGHT BURNER
RIGHT CENTRAL BURNER
CENTRAL BURNER
℃
ELECTRIC OVEN THERMOSTAT
ELECTRIC OVEN FUNTION KNOB
IGNITION AND OPERATION OF THE BURNERS
In order to ignite a burner, it is necessary to depress the knob while rotating it anti-clockwise, till the index
is aligned with the position corresponding to the maximum gas delivery (i.e. the large flame symbol). As far
as the models equipped with a safety valve are concerned, once the flame is lit hold the knob
depressed for about 3-4 seconds till the device keeps the burner
automatically lit. If the burner fails to ignite,wait one minute
for the gas to dissipate before attempting to reignite. At this
moment it is possible to adjust the flame intensity by rotating
the knob anticlockwise from Such maximum position to the minimum
one (i.e. the small flame symbol).
In order to turn the burner off, rotate the knob clockwise bringing
the index back to the position corresponding to the closure symbol ( ).
RECOMMENDATIONS
In case of electric power failure, it is necessary to carry out the above-described operations by putting a gas
lighter or a flame near the burner (in such an event, pay the utmost attention not to burn yourself).
The safety valve (for models where such item is provided) intervenes in case of accidental flame failure,
blocking the gas delivery (e.g.: air draughts, spillage of liquids, etc.).
In any case, the ignition device must not be actuated for longer than 15 seconds. Should the ignition
manoeuvre fail, or should the burner be accidentally turned off, immediately close the actuation knob and
repeat the ignition after one minute at least.
Once the ignition has taken place, adjust the flame according to your needs.
Advice on the use of gas burners
For lower gas consumption and a better yield, use saucepans with diameter suitable for the burners,
avoiding the flame coming up round the side of the saucepan (see the Container Table). Use only flatbottomed pans.
As soon as a liquid starts to boil, turn the flame down to a level sufficient to maintain boiling.
During cooking, when using fats and oils, be very careful because if they overheat they could catch fire.
Container table (use flat-bottomed saucepans)
Burner
φmin Saucepan
(mm)
φmax Saucepan
(mm)
Auxiliary
90
160
Semi-rapid
130
180
Fish pan
310×140
380×230
Rapid
150
260
Triple ring
210
260
11
Instructions for Use
℃
(oven side)
60
ELECTRIC OVEN THERMOSTAT KNOB
80
Selection of cooking temperature is carried out by turning the knob
clockwise to the required temperature, between 60℃ and MAX .
If the appliance
is with an electric oven, the warning light will
come on when the oven is heating up. When it goes out it means that
it reaches the required temperature . Regular flashing means that
oven temperature is being constantly maintained at the programmed
level.
MAX
A
100
220
120
200
180
140
160
ELECTRIC OVEN CONTROL KNOB
B
Each of the functions listed below can be used only together
with the correct temperature.
8-Function
5-Function
The selector B and thermostat A control is used to select the various oven functions and to choose the
cooking temperatures best corresponding to the food to be cooked. During oven operation the lamp will
always remain on.
The lamp of the oven is on, with no heating elements operated (electrical resistances). During oven
operation the lamp will always remain on
TRADITIONAL COOKING
THERMOSTAT SELECTOR SWITCH FROM 60℃ TO MAX
The heat is provided from the top and bottom elements. The oven must be preheated before the food is
placed inside. Static cooking provides optimum results with: cakes, pizzas, bread and for gentle slow
cooking of casseroles. Characteristics of static cooking: heat provided from above and below,
cooking is possible only on middle shelf and should be centrally located in the oven.
DELICATE COOKING
THERMOSTAT SELECTOR SWITCH FROM 60℃ TO MAX
Ideal for pastries and cakes with wet covering and little sugar and damp desserts in moulds. Excellent
results can also be achieved in completing cooking at the bottom and with dishes requiring heat in the
Lower area in particular. The plate is best inserted at bottom level.
TOP OVEN COOKING
THERMOSTAT SELECTOR SWITCH FROM 60℃ TO MAX
Top oven - Use for brown food at the end of cooking.
GRILL COOKING
THERMOSTAT SELECTOR SWITCH FROM 60℃ TO MAX
Grill Element - Use for toasting and melting cheese or browning. The cooking time should be no
longer than 5 minutes. To operate,please select Full Grill Function along with the temperature.
FAN ASSISTED GRILL COOKING
THERMOSTAT SELECTOR SWITCH FROM 60℃ TO 200℃
Use of the Grill Element and Fan. Use for grilling meats, vegetables and poultry. Preheat oven, place
food on grill rack in baking tray and place in the middle of the oven. Other food may be cooked
underneath whilst grilling. The oven door must be closed for all cooking methods
FAN FORCED COOKING
THERMOSTAT SELECTOR SWITCH FROM 60℃ TO MAX
The circular heating element and fan come into operation and the heat is spread evenly to all shelf
positions. Various types of food can be cooked on different shelves, naturally with the appropriate
cooking times. The oven must be preheated before the foods are placed inside. Fan mode provides
optimum results with: cakes (soft and thick), large quantities of foods and cooking various dishes
simultaneously. To operate,please select Fan Forced function along with the temperature.
12
DEFROSTING
THERMOSTAT SELECTOR SWITCH ANY
The fan located on the bottom of the oven makes the air circulate at room temperature around the food
.This is recommended for the defrosting of all types of food ,but in particular for delicate types of food
which do not require heat such as for example:ice cream cakes,cream or custard desserts,fruit cakes.By
using the fan,the defrosting time is approximately halved.In the case of meat,fish and bread,it is possible
to accelerate the process using the "Fan forced"and setting the temperature to 80 ℃TO 10 0℃
The oven door must be closed for all cooking methods.
The turnspit(only available on certain models)
To start the turnspit,proceed as follows:
1 Place the oven tray on the 1st rack;
2 Insert the special turnspit support on the 2nd rack and position the spit by
Inserting it through the speciai hole for the turnspit at the back of the oven;
3 Start the turnspit using electric oven control knob to select setting
/
/
/
.
6 BUTTON DIGITAL CLOCK
- Showing time(0:00-24:00)and minutes.
A
- The screen shows 3 flashing number and “AUTO”if the power is on .
U
T
- In order to set correct time ,Press the button fist ,then + or - button to
O
carry forward backward the figure until the exact time shows.
Manual operation setting
Press the button to remove the flashing of “ AUTO ”.
If“AUTO”is gittering (automatic or semi automatic program has been
set),Press button to remove“AUTO”and then the manual operation
process is on.
Automatic setting(set the full automatic starting and ending)
1.Press
button,set roast time.
2.Press
button,set roast finish time.
3.Set tempeatures and roast modes by turning the thermostat knob and selector knob.
After the setting above,“AUTO”will be flashing,which means the roast process of the oven is set.
For example:if roast time takes 45mintes and expect it will end at 14:00.
Press
the roast time is to be 45minutes;Press
the roast is set to end 14:00.
After the above setting,the screen shows the real time(hour.minute)and flashing“AUTO”,it means the set roast
process is memorized automatically.
When the clock turns to be 13:15(or between 13:14-13:15,the oven will start automatically in the roast time,
and “AUTO”will be always flashing.
When the clock turns to be 14,the roast is done ,the alarm is ringing and flashing “ AUTO”.After pressing the
button,the ringing will stop.
Semi-automatic setting(set the time of automatic starting and ending)
A.Set the time limit of roast(10 hours maximum):
Press the
button to set the time of roast;The oven starts immediately,
and“AUTO”will flash.After the
roast is finished,the roast operation process will be shut automatically.Then“AUTO”flashing,the alarm
Rings.The ring will stop by pressing the button.
B.Set the time of ending (23hours 59minutes maximum):
Press the
button to set the time of ending;The oven starts immediately,
and“AUTO ”will flash.When the
set time of ending comes,the roast operation process will be shut automatically.Then “AUTO”flashs,the
alarm rings. The ring will stop by pressing the button.
Whenever the related button is pressed,the set roast process will be seen.Whenever the
button is pressed,and
carry backward the time to “0”,the set roast process will be cancelled.
If button is pressed again,the oven will be in the manual operation process.
Timer:23hours 59minutes can be set as maximum.
When setting time,press the button,and then + or - button,until the required time shows on the screen.After the
setting,the correct time(hour,minute)and the button will show on the screen and timing begins immediately.
Whenever the button is pressed,timing will be seen,When the set time reaches, the alarm will ring .The ringing
will stop after pressing the button.
Notice:After pressing the related button,setting is supposed to be done in 5 seconds.In case of blackout,the set
process as well as the real time(hour,Minute)will isappear.After the power is on again,three
“0”and”AUTO”shows on the screen,this mean the oven has been automatically reset.
Cooling ventilation:In order to cool down the exterior of the appliance,the model is equipped with a cooling
fan,which comes on automatically when the oven is hot.
When the fan is on,a normal flow of air can be heard exitting between the door and the controlpanel.
Note:When cooking is done,the fan stays on until the oven cools down sufficiently.
13
3
14
Instructions for Cooking
OVEN COOKINGS
For a perfect cooking, it is necessary to pre-heat the oven to the preset cooking temperature. Only very fat
meat can be placed into a cold oven. To minimse food splashes into the oven (which can produce smoke
sometimes) deep baking dishes are recommended.Use instead highedged containers, preferably terracotta
containers, put on the grate at about half the height of the oven. The table shows some examples of how to
set the thermostat and the cooking time. The cooking times vary according to the type of food, its
homogeneity and volume. We are sure that, after a few endeavours, the experience will suggest possible
variations to the values shown on the table.
Practical hints to save energy
The oven can be switched off some minutes before cooking end; the residual temperature is enough to
complete cooking. Open the oven door only when it is absolutely necessary; to check the cooking phase,
look through the glass (the oven lamp is always on).
General Advice
The oven offers various kinds of heating:
the traditional heating for the cooking of special roasts
the fan forced heating for the cooking of cakes, biscuits and similar.
If the fan forced cooking is chosen, it is recommended to take advantage of it.Hence, cooking or roasts on
more shelves is recommended to save time and energy.
Fan Assisted
A continuous circulation of warm air is created, which allows food to be placed and cooked on different
shelves at the same time. The oven will reach the preset temperature in a very short time.
Traditional cooking
This is especially suitable for the cooking of meats/poultry that requires long, slow cooking as well as for
the cooking of bread and sponge cakes. It is advisable to place the food to be cooked into the oven when the
right cooking temperature is reached, that is to say when the pilot light of the thermostat estinguishes.
Grill cooking
Delete, pre-heat the oven for about 5 minutes. During grill operation the heat comes from above; it is based
on the infrared radiation and is fit for low thickness meat and for toasts. The meat and the fish to be grilled
are to be slightly oiled and always placed on the grate; this is to be arranged on the nearest or on the farthest
guide from
the grill element, according to the thickness of the meat to be cooked. The table shows some examples of
cooking times and food positions. The cooking times vary according to the type of food, its homogeneity
and volume.
Cooking pastry
The air circulation of the oven assures an instantaneous and uniform heat distribution. The pre-warmed of
the oven is no longer necessary. However for specially delicate pastry the oven can be pre-warmed. More
trays can be inserted into the oven together with the pastries, taking care not to use the first grid starting
from above.
Gratinating
By this term is meant the surface alteration of food, often pre-cooked, when, after being introduced into the
oven, it takes a golden-brown and crisp aspect.¡Gnocchi alla romana¡,¡ polenta pasticciata" rice, lasagnas,
noodles and vegetables dressed with bechamel are typical preparation for this type of cooking.
Cooking times
The table shows some examples for the adjustment of the thermostat and of the cooking time. The cooking
times can vary according to the type of food, and volume. We are sure that, after a few endeavours, the
experience will suggest possible variations to the values shown on the table.
REMARK:
The times indicated in the table refer to the cooking of one portion only; for more than one portion, the
cooking times should be increased by 5 -10 minutes.
TABLE OF COOKING TIMES
The table below provides indicative shelf positions for use with your oven. Please
note,the temperature and cooking times are indicative only.According to different
cooking habits, it may be necessary to make further modifications. Please add to
The 15 minutes to the times indicated for preheating.
15
Selector knob
setting
Traditional
cooking
Food to be cooked
First courses
Lasagne
oven-baked pasta
MEAT
Roast veal
Roast beef
Roast pork
Chicken
Duck
Goose-turkey
Rabbit
Leg of lamb
Roast fish
Pizza
DESSERTS
Meringue
Short pastry
Ciambella
Savoyards
Brioches
Fruit cake
Browing food to
perfect cooking
Level
from below
Temperature
(℃)
Time in minutes(*)
2-3
2-3
210-230
210-230
30
40
2
2
2
2
2
2
2
1
175-200
210-240
170-200
170-200
170-200
140-170
170-200
170-200
1-2
170-200
1-2
210-240
30-40/kg
30-40/kg
30-40/kg
45-60
45-60
45-60
50-60
15/kg
According to
dimensions
40-45
1-2
1-2
1-2
1-2
1-2
1-2
50-70
170-200
165
150
170-200
170-200
60-90
15-20
35-40
30-50
40-45
20-30
3-4
15
220
Level
from below
Temperature
(℃)
Time in minutes
2
2
2
190-210
190-210
190-220
20-25
25-30
20-25
2
2
2
2
2
2
2
2
2
2
2
2
150-170
150-160
160-170
160-180
130-150
170-180
170
160-170
150-160
150-160
160-170
140-170
65-90
70-100
65-90
35-45
100-130
40-45
70-90
100-160
160-240
80-100
30-50
15-25
2-3
150-170
2-3
210-240
2-3
2-3
2-3
2-3
1-2
2-3
2-3
1-2
150-170
170-190
190-220
160-170
150
160-170
190-210
220-240
(*) With preheated oven
Selector knob
setting
Fan forced
cooking
Food to be cooked
First courses
Lasagne
Oven-baked pasta
Creole rice
MEAT
Roast veal
Roast pork
Roasted beef
Fillet of beef
Fillet lamb
Roast beef
Roast chicken
Roast duck
Roast turkey
Roast rabbit
Roast hare
Roast pigeon
Fish
Pizza
DESSERTS(PASTRIES)
Ciambella
Fruit cake
Sponge-cake
Brioches
Strudel
Savoyard pudding
Bread
Toast
16
According to
dimensions
30-50
35-45
40-50
25-35
40-60
25-35
30-40
40
7
Selector knob
setting
Grilling
Food to be cooked
Level
from below
Pork chops
Fillet of pork
Fillet of beef
Liver
Veal Escalopes
Half chicken
Sausages
Meat-balls
Fish fillets
Toast
4
3
3
4
4
3
4
4
4
4
Time in minutes
First surface
7-9
9-11
9-11
2-3
7-9
9-14
7-9
7-9
5-6
2-4
Second surface
5-7
5-9
9-11
2-3
5-7
9-11
5-6
5-6
3-4
2-3
4
3 SHELF POSITIONS
2
1
FAN OVEN
Maintenance and Cleaning
Do not use jet of steam for cleaning.
Before any operation disconnect the appliance electrically. Wash the enamelled parts with lukewarm water
and detergent. Do not use abrasive products. Wash the burner spreader frequently with boiling water and
detergent make sure to remove any deposits which could block the flame outlet. Rinse the stainless steel parts
well with water and dry them with a soft cloth.
To clean the hob use slightly damp sponges and wiping cloths: if too much water is used it could penetrate the
internal parts and damage electrical parts. The grids of the hob can be washed in the dishwasher.
For persistent stains use normal non-abrasive detergents, specific products commonly available on the
market or a little hot vinegar. Clean the glass parts with hot water, avoiding the use of rough cloths.
Do not use stainless steel pads or acids for cleaning. To prevent lighting difficulties, carefully clean the
lighting spark plugs regularly (ceramic and electrode).
Periodically if the knobs become difficult to turn, contact a qualified engineer to lubricate the taps.Contact a
qualified engineer to deal with any other problems which may arise during use.
To keep the characteristics of brightness of the enamelled parts for a long time it is necessary to clean the
oven after each cooking. Once the oven is cold, you will be able to easily remove the fat deposits by means of
a sponge or a cloth damp with warm soapy water or a common detergent. Never use abrasive cloths or
sponges, that could irreparably damage the enamel. On white ovens even the parts of the dash board such as
handgrip and knob have to be cleaned each time because they may become yellow due to the emissions of fat
vapours.
ALWAYS CLEAN THE APPLIANCE IMMEDIATELY AFTER ANY FOOD SPILLAGE.
TO MAINTAIN SAFE OPERATION, IT IS RECOMMENDED THAT THE PRODUCT BE INSPECTED
EVERY FIVE YEARS BY AN AUTHORISED SERVICE PERSON.
17
Ovens with facility to lower grill for cleaning purposes
1 Warning:ensure that all controls are in the“OFF”position and wait the grill
elementcooling.
2 Support the front of the grill element while you remove the knurled screw
retaining the element.
3 Lower the front of the element carefully to the rest position.
4 When cleaning the oven make sure do not apply any forces to the grill element
5 When the cleaning is complete, carefully remove any cleaning chemicals and
water from the grill element.
6 Carefully raise the front of the element into position and secure with the
knurled screw.
NEVER USE THE OVEN WITH THE GRILL ELEMENT HANGING DOWN!
Important. In case of burners removal for cleaning purposes, we recommend to make sure that all parts are
correctly positioned before igniting the burners again.
THE GRIDS OF THE COOKING PLANE ARE EQUIPPED WITH SUITABLE RUBBER PADS, ITS
PURPOSE IS BOTH PROVIDING BETTER STABILITY AND AVOIDING SCRATCHES ON THE PLANE
SURFACES DURING USAGE.
AFTER A POSSIBLE GRID REMOVAL FOR CLEANING AND/OR MAINTE-NANCE NEEDS,WE
RECOMMEND TO VERIFY THE PRESENCE OF SUCH RUBBER PADS AND TO PUT THE GRIDS
BACK IN THEIR ORIGINAL POSITION.
Cleaning the oven door
Unhooking the doors.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble method
according to different structure of oven door purchased.
Proceed as follows:
Open the door fully;
Lift up and turn the small levers located on the two hinges;
Grip the door on the two external sides and close it approximately half way.Unlock the door by pressing on
the clamps F,then pull the door towards you lifting it out of its seat.To replace the door,reverse this sequence.
F
Replacing the oven bulb
Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, Always
remember to use high temperatures (300/ E14) bulb for the oven. Reassemble the glass cap and reconnect the
oven after replacing the bulb.
18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement