table of contents

table of contents
table of contents
Section
Page
A1
A2
A3
A4
1
2
4
5
B1
B2
B3
9
16
20
C1
C2
23
24
D1
D2
D3
25
28
30
E1
E2
E3
E4
37
39
42
46
A ignition switches
Sealed Key switch series 95060
All-Purpose Ignition Switches
Specialized Ignition Switches
Accessories
B rockers & toggles
®
Cole Hersee
Cole Hersee Co has been manufacturing reliable electrical
products since 1924.
This Heavy Duty Catalog describes our complete line, but we can
adapt many of these products to order by changing terminals,
knobs, by adding seals or by PVC-coating (to name but a few
variants). Contact us to discuss the possibilities. Our engineers
are on hand to design from the ground up the best switching
solution to your application.
Cole Hersee is trusted world wide for reliable switches.
Availability of products:
Rapid Ship: Items that are likely to be in stock at Cole Hersee 95% of the time, on average.
*
Minimum order quantities may apply to these items.
Consult Cole Hersee.
When placing an order, use the Cole Hersee Part Number – Alone to order that part in bulk. No suffix is needed.
With the suffix BP to order that part in a retail pack.
With the suffix BX to order that part in decorative boxes.
Rocker Switches
Toggle Switches
Wiring Diagrams
C Windshield wiper switches
Electronic Switches
Electrical Switches
D Relays & Solenoids
Relays & Microrelays
Modules
Solenoid Relays
E battery management products
Low Voltage Disconnect Switches
Battery Selector & Master Disconnect Switches
Master Disconnect Selector Switches
Battery Isolators
F momentary & push-pull switches
Push-Button Switches
Push-Button Caps
Push-Pull Switches
Push-Pull Accessories
F1
F2
F3
F4
49
52
52
54
G breakers & fuses, blocks, connectors
Copyright © Cole Hersee Company 2009
Cole Hersee Company has compiled the information in this catalog
from company records and other authoritative sources, and believes the
information to be accurate as of the date of printing. We offer this catalog as a guide and a convenience to customers. Since the user’s specific application is beyond the control of Cole Hersee Company, we make
no warranty or representation regarding the results that may be obtained
by the user, or the suitability of the part for the user’s application.
Circuit Breakers & Accessories
Fuses
Terminal Blocks
Trailer Connectors G1
G2
G3
G4
55
58
59
63
H1
H2
H3
65
66
67
H monitoring devices
Buzzers & Alarms
Pilot Lights
Monitoring Switches
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
table of contents
Section
I
Motor Reversing Module
point-of-purchase
Clamshell Packaging
Assortment Kits
Merchandising Aids
Literature
J
Page
I1
I2
I3
I4
69
69
70
70
Interchange to Cole Hersee Parts
71
Trouble-free reversing. Unit understands when end of travel
is reached. Page 29.
interchange
Low Voltage Disconnect Switches
Page 37.
LED Pilot Lights
Never replace another bulb!
Page 66.
Master Disconnect Switches
Protects boats from tampering, theft, and battery drain.
300 Amp capacity!
Page 42.
Sealed Ignition Switches
With integral connector.
Smart Battery Isolator
Prevents loads on auxiliary battery from draining starting
battery. Page 46.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
index
Keyword
Section
Keyword Index
Ignition chart............................6
AFD........................................39
AGM battery info....................41
Alarms ..................................65
Anti-restart switches................1
AWG chart..............................63
Battery isolators.....................47
Battery switch ratings............43
Battery type info....................41
Bezels for rockers..................15
Blocks, terminal.....................59
Boot for ignition switch............5
Boot seals (toggle).................17
BPs........................................68
Brackets (rocker mounting)....15
Brackets for breakers.............56
Breaker holders.....................56
Breakers ...............................55
Bubblepacks..........................69
Busbars.................................57
Buzzer alarms........................65
Cable terminal.......................45
Caps for
push-button switches ...........52
Choke switches.....................68
Circuit breakers ....................55
Clamshell packaging . ...........69
Continuous duty solenoids.....31
Cutoff switch..........................19
Deep cycle battery info..........41
Delcotron isolator .................47
Demonstration kits ...............69
Diesel ignition switches...........4
Digital rocker switches...........13
Disconnect switches..............42
Disconnect, low voltage.........37
Document holder...................64
DPST, DPDT explanation.........20
Dual rate alarm......................66
Electronic relay......................29
Electronic solenoid.................28
Emergency cutoff toggle........19
Engine warning kit.................65
Face plates............................46
Feeder studs..........................45
Forward & reverse module.....28
Four-way lighting...................19
Fuse holders..........................56
Fuses.....................................58
Hexnuts.................................54
Holders (fuses).......................56
Ignition keys............................5
Ignition switch chart................6
Ignition switches . ...................1
Ignition toggle........................19
Inline breakers.......................56
i
Keyword
Section
Interchange............................71
Intermittent duty solenoids.....32
Isolator, battery......................47
Isolator, smart........................46
Jumper terminals...................45
Key switches............................1
Keys for ignition switches........5
Knobs, push-pull....................54
Latching solenoid...................36
LED pilot light........................66
LED rockers.............................9
Lighted tip toggle . ................18
Literature . ............................70
Locking rocker.......................13
Lockout lever kit....................46
Low current rocker................13
Low voltage disconnect.........37
LVD........................................37
Magneto ignition switches.......5
Man overboard switch...........19
Master disconnect switches...42
Merchandising aids . .............70
Microrelays............................26
Monitoring switches...............67
Motor reversing solenoid........36
Mounting bezels (rocker)........15
Mounting brackets (rocker)....15
Narrow rockers......................14
Oil pressure switches.............68
Paddle handle toggle.............16
Pilot lights . ...........................66
Plugs & sockets.....................63
Point of purchase...................69
Product interchange...............71
Push-button switches ...........49
Push-Pull chart......................50
Push-pull ignition switch..........4
Push-pull switches.................52
Push-to-choke.........................3
Quick-Tap..............................58
Relay module
(forward/reverse)...................28
Relays....................................25
Reversing module..................29
Reversing relay......................28
Reversing solenoid.................36
Rocker chart............................8
Rocker mountings..................15
Rocker switches......................9
Rocker switches, Sigma.........13
Rockers with pilots..................9
Round pilot rockers..................9
Running lights switches.........54
SAE symbols..........................13
Sales aids .............................70
Schottky battery isolator........48
Sealed key switch....................1
Selector switches...................42
Keyword
Section
Sigma alarm..........................14
Sigma rocker.........................13
SLI battery info......................41
Smart isolator........................46
Smart reversing module.........29
Snap-in lens rockers..............11
Sockets & plugs.....................63
Solenoid relays......................31
Solenoids...............................31
Solenoids explanation............30
Splicer...................................58
SPST, SPDT explanation.........20
Stud, feeder...........................45
SureStart LVD.........................37
Taps.......................................58
Temp switches.......................67
Terminal blocks ....................59
Terminal, cable......................45
Terminals, jumper..................45
Toggle boot seals...................17
Toggle chart.............................8
Toggle switches.....................16
Trailer connectors .................64
UL standards..........................53
Warning alarms......................65
Wide lens rockers....................9
Windlass switch.....................52
Windshield wiper switches.....23
Wire gauge chart...................63
Wiring of toggles & rockers....20
LED Rocker Switch
A new series of rockers featuring super-bright LEDs.
Page 9.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
index
Part Number
Section Page
Numerical Index
3-digit & 4-digit numbers
407 series...................F2
956-9100...................A3
1134.......................... G3
1160.......................... G3
1238.......................... G3
2430.......................... D3
2484 series.................E3
3031 series................ G1
4099.......................... H1
4112-RC.................... H1
4124-RD.................... H1
4721 series................ G3
5520...........................B2
5582...........................B2
5582-10.....................B2
5582-30BP.................B2
8113-10.....................F4
8197-10.....................F4
8304...........................F4
8338...........................F4
8340...........................F4
8343...........................F4
8346...........................F4
8606.......................... H3
8609.......................... H3
8610.......................... H3
9006...........................F1
9044...........................F1
9187...........................F1
9187-01.....................F1
9187-02.....................F1
9250...........................F1
9576...........................A3
52
4
63
64
63
33
43
56
65
65
65
60
17
17
17
17
54
54
54
54
54
54
54
68
68
68
51
51
51
51
51
52
4
5-digit numbers
11134........................ G3
11134-08BP.............. G3
11135........................ G3
11172........................ G3
11173........................ G3
12804.........................E1
24008........................ D3
24021........................ D3
24022........................ D3
24023........................ D3
24037........................ D3
24039........................ D3
24041........................ D3
24046........................ D3
24047........................ D3
24059........................ D3
24059-08.................. D3
24060........................ D3
24063........................ D3
24063-08.................. D3
64
64
64
64
64
37
32
35
33
33
33
34
34
33
33
31
32
33
31
31
Part Number
Section Page
24071........................ D3
24077........................ D3
24080........................ D3
24080-01.................. D3
24082........................ D3
24097........................ D3
24103........................ D3
24104........................ D3
24106........................ D3
24107........................ D3
24115........................ D3
24117........................ D3
24117-01.................. D3
24124........................ D3
24135........................ D3
24143........................ D3
24144........................ D3
24200........................ D3
24400........................ D3
24401........................ D3
24401-01.................. D3
24401-04.................. D3
24402........................ D3
24420........................ D3
24450........................ D3
24452........................ D2
24505.........................E3
24512-03.................. D3
24512-10.................. D3
24512-13.................. D3
24560........................ D2
24612........................ D3
24612-10.................. D3
24612-G10................ D3
24624-10.................. D3
24636........................ D3
24712-GS7................ D3
24812........................ D3
24812-01.................. D3
24824-01.................. D3
30147........................ G1
30183........................ G1
30186........................ G1
30223........................ G1
30245........................ G1
30406 series.............. G1
30407 series.............. G1
30410 series.............. G1
30411 series.............. G1
30413 series.............. G1
30419 series.............. G1
30423 series.............. G1
31101........................ G3
40151........................ H1
40205.........................B1
40212........................ H1
46206-04.................. G3
46210-02...................E3
33
33
31
31
32
32
35
32
32
31
31
31
32
31
31
32
31
36
35
35
35
35
35
32
36
28
46
34
34
34
29
34
34
34
34
34
34
35
35
35
56
56
56
58
58
55
55
55
56
56
55
55
64
65
14
66
59
45
Part Number
Section Page
46210-03...................E3
46211-01...................E3
46211-R.....................E3
46377 series.............. G3
46379 series.............. G3
48051.........................E4
48070.........................E4
48080.........................E4
48090.........................E4
48092.........................E4
48120.........................E4
48122.........................E4
48160.........................E4
48161.........................E4
48162.........................E4
48510.........................E1
48511.........................E1
48511-01...................E1
48512.........................E1
48513.........................E1
48513-01...................E1
48520........................ D2
48525.........................E4
48530.........................E4
48785........................ D2
54003.........................B1
54003-01...................B1
54010.........................B1
54012.........................B1
54100.........................B2
54100-01...................B2
54101.........................B2
54101-01...................B2
54103.........................B2
54103-01...................B2
54104.........................B2
54104-01...................B2
54105.........................B2
54105-01...................B2
54107.........................B2
54107-01...................B2
54109.........................B2
54109-01...................B2
54110.........................B2
54110-01...................B2
55014.........................B2
55014-05...................B2
55020.........................B2
55020-04...................B2
55023.........................B2
55036.........................B2
55036-14BP...............B2
55037.........................B2
55046-06...................B2
55049-01...................B2
55052-01...................B2
55055.........................B2
55055-01...................B2
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
45
45
45
62
62
48
47
47
47
47
47
47
47
48
47
38
38
38
38
37
37
29
46
46
28
14
14
14
14
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
17
17
17
17
17
16
16
17
18
17
17
17
17
Part Number
Section Page
55088.........................B2
55093.........................B2
55094.........................B2
56027-01...................B1
56327-01...................B1
56328-49...................B1
58022-03...................B1
58027-01...................B1
58027-02...................B1
58027-03...................B1
58027-04...................B1
58027-06...................B1
58027-07...................B1
58027-08...................B1
58027-11...................B1
58027-18...................B1
58036-06...................E1
58311-01...................B1
58311-02...................B1
58311-03...................B1
58311-04...................B1
58311-06...................B1
58311-07...................B1
58311-08...................B1
58311-11...................B1
58311-13...................B1
58311-18...................B1
58312 series...............B1
58327-01...................B1
58327-06...................B1
58327-06...................B1
58328 series...............B1
58332 series...............B1
58336.........................B1
58500 series...............B1
59071.........................B2
75212-04...................C2
75221-09...................C2
75226.........................C2
75228-04...................C2
75236.........................C2
75600-01...................C1
75600-04...................C1
75602-02...................C1
75602-04...................C1
75903.........................E3
75904.........................E3
75904-01...................E3
75907.........................E3
75908.........................E3
75912.........................E3
75920 series...............E3
81264 series...............B2
82065.........................E3
82065-02...................E3
82159 series...............B1
83280 series...............F2
83285-01...................A4
16
18
19
11
10
10
11
11
11
11
11
11
12
12
12
12
38
11
11
11
11
11
12
12
12
11
12
9
10
10
11
9
12
13
13
19
24
24
24
24
24
23
23
23
23
44
44
44
44
43
45
42
17
46
46
15
52
5
ii
index
Part Number
Section Page
83288.........................A3
83307.........................F4
83379.........................A4
83451 series...............A4
84210........................ H3
84218........................ H3
84227........................ H3
84229........................ H3
84236........................ H3
84248........................ H3
84251........................ H3
86099 series.............. G1
86126 series.............. G1
86272........................ H3
86281........................ H3
86284........................ H3
86302-02.................. H3
87128 series.............. G1
87167-01BP...............B1
90002.........................F1
90002-01...................F1
90043.........................F1
90043-07...................F1
91126.........................F1
95033.........................A3
95060 series...............A1
95520-B.....................A3
97297........................ D2
97298.........................A4
97846-A.....................E3
97846-B.....................E3
98628.........................B1
99025........................ D1
99026........................ D1
5
54
5
5
67
67
67
67
67
67
67
57
57
68
68
68
68
56
15
51
51
51
51
51
4
1
5
28
5
45
45
15
27
27
Alphanumeric
AGC98113 series....... G2
ATC98108 series........ G2
ATM98107 series....... G2
D-275..........................I3
D-400..........................I3
DL-75-12V................. H2
F-1243.........................I3
F-1244.........................I3
F-1245.........................I3
M-114....................... G3
M-115....................... G3
M-118....................... G3
M-121....................... G3
M-200....................... D3
M-200-01.................. D3
M-202....................... D3
M-284 series..............E3
M-288........................E3
M-289........................E3
M-290 series..............E3
M-320-GC.................. H2
M-320-RC.................. H2
58
58
58
70
70
67
70
70
70
63
63
63
63
33
33
33
43
43
44
44
66
66
iii
Part Number
Section Page
M-326-AC.................. H2
M-326-RC.................. H2
M-328....................... H2
M-40177BP............... H1
M-412....................... G3
M-414....................... G3
M-414-01.................. G3
M-415....................... G3
M-415-01.................. G3
M-426....................... G3
M-427....................... G3
M-428....................... G3
M-429....................... G3
M-448....................... G3
M-448-02.................. G3
M-449....................... G3
M-449-04.................. G3
M-456....................... G3
M-476........................F3
M-482 series..............F3
M-484........................B2
M-485........................F1
M-485-01...................F1
M-485-02...................F1
M-486........................F3
M-489........................A2
M-489-03...................A2
M-490........................F1
M-491........................F1
M-492........................F1
M-492-01...................F1
M-493........................B2
M-497........................A2
M-524........................F1
M-527........................F3
M-530........................F3
M-531........................F3
M-532........................F3
M-54111-01...............B2
M-54111-02...............B2
M-550........................A2
M-550-14...................A2
M-550-25...................A2
M-58031 series..........B1
M-584........................B2
M-586........................B2
M-597........................B2
M-598........................B2
M-606........................F3
M-608........................F1
M-6110-01.................A2
M-612........................F1
M-626........................F1
M-626-02...................F1
M-628........................F3
M-630........................F3
M-639........................F1
M-641-01.................. G3
67
67
67
65
61
61
61
61
61
60
60
60
60
59
59
59
59
60
53
52
18
50
50
50
53
4
4
49
49
50
50
18
4
50
53
53
53
53
18
18
3
3
3
12
18
18
19
19
53
50
3
49
49
49
53
53
50
61
Part Number
Section Page
M-643-01.................. G3
M-645-01.................. G3
M-647-01.................. G3
M-649 series............. G3
M-674....................... G3
M-676........................A2
M-700........................A2
M-702........................A2
M-703........................A3
M-711........................A2
M-712........................A2
M-712-02...................A2
M-712-09...................A2
M-750........................E2
M-751........................E2
M-752........................E2
M-754........................E2
M-832........................A2
M-850........................A2
M-914-01...................F1
M-924........................A3
M-932........................A2
M-95502....................A2
MA Microrelays.......... D1
MAX98111 series....... G2
MC Microrelays.......... D1
PL-612 series............ H2
R2 Relays.................. D1
RA Relays.................. D1
RC Relays.................. D1
SD-40..........................I2
Part Number
Section Page
61
61
61
59
62
4
2
4
5
3
2
2
2
39
39
39
39
3
3
50
5
3
2
25
58
25
66
25
25
25
69
Electronic Latching Relay
For high power loads up to 200A.
Page 29.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
ignition switches A
95060 Series
All-Purpose Ignition Switches
Specialized Ignition Switches
Accessories
A1 Sealed Key switch series 95060
Sealed Key Switch Series 95060
Fully sealed to IP-67, (immersible) these switches are ruggedly
constructed from engineering thermoplastic, with an integral Deutsch
connector. Suitable for use as rotary switches as well as for ignition.
A1
A2
A3
A4
Four Position Switches
Positions
Spring
Return
With
Key boot
Keyed
alike?
95060
Acc-Off-Run-Start
Yes
Yes
No
95060-01
Acc-Off-Run-Start
Anti-restart
Yes
Yes
No
95060-02
Acc-Off-Run-Start
No
Yes
No
Positions
Spring
Return
With
Key boot
Keyed
alike?
95060-03
Off-Run-Start
Yes
Yes
No
95060-04
Off-Run-Start
Anti-restart
Yes
Yes
No
95060-05
Off-Run-Start
No
Yes
No
95060-06
Acc-Off-Run (no Start)
N/A
Yes
No
Positions
Spring
Return
With
Key boot
Keyed
alike?
Off-Run
N/A
Yes
No
Spring
Return
With
Key boot
Keyed
alike?
Yes
Yes
No
Yes
Yes
No
Part Number
Three Position Switches
Part Number
Tested to SAE J259 for ignition switches. Plastic facenut and
nickel-plated brass backing nut. Supplied with two matching
double bitted keys, with or without TPE (thermoplastic elastomer)
key boot. Mounting stem M22 x 1.5 is 0.85" long (21.6mm)
and 0.87" diameter (22.0mm ). Double-D mounting hole is
22.5mm diameter with two flat sides at 9.75mm from the
center. Maximum panel thickness 8mm. For replacement
keys see page 5. 10A at 12V DC, 5A at 24V DC.
Two Position Switches
Part Number
95060-07
Anti-Restart Switches
Part Number
95060-01
Clamshell retail units 95060-50BP and 95060-60BP contain
switch and wire harness (wires and Deutsch connector.)
95060-50BP contains switch 95060; 95060-60BP contains
switch 95060-03. Wire colors conform to ABYC specifications.
Rapid ship item. BP
Available in retail clamshell pack. 95060-04
Positions
4-Position AccOff-Run-Start
3-Position
Off-Run-Start
Twin Engine Boats We recommend anti-restart switches for use
in noisy situations, especially for twin engine boats where the
operator might be unaware that an engine is already running.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
1
ignition switches
A
M-712-02 Weather-Resistant
Same as M-712, except with O-ring seal in the mounting stem,
and with spring-actuated shutter in the lock face to protect the
cylinder when not in use.
M-712-09 With Rubber Boot Assembly BP
Same as M-712, except with weather-resistant rubber boot and mounting nut assembly to protect against moisture and dirt with
or without the key inserted.
MOUNTING STEM, M22 x 1.5
POS 2
OFF
POS 1
ACC
POS 3
IGN & ACC
POS 4
START
BRASS HEXNUT
BLACK PLASTIC
FACENUT
CONNECTOR TO ACCEPT
DEUTSCH DT06-6S CONNECTOR
OR EQUIVALENT
BLACK PLASTIC HOUSING
M-700 With Diecast Case
Four brass screw terminals. Diecast case with protective finish.
Mounting stem 3/4" -20, 13/16" (20.6mm) long, fits panels up to
1/4" (6.4mm). Knurled aluminum adapter facenut permits mounting in 3/4" (19.1mm) to 7/8" (22.2mm) diameter holes.
1.248 [31.69]
Position 1
Position 2
Position 3
Position 4
Battery
Terminals
1&6
x
x
x
x
Start
Terminal 2
Ø2.011 [51.07]
1.950 [49.52]
Accessory
Ignition
FLAT
Terminal0.750
3 [19.05]
Terminals
4&5
x
0.850 [21.59]
Keys for 95060 series switches - see page 5.
x
x
M-95502
Same as M-700, but with blade terminals.
Ø0.125 [3.18] 2 PL
A2 all-purpose ignition switches
3-Position
Suitable for harsh environments whether on land or at sea. They are
corrosion-resistant, often with brass cases and extra seals. Moisturerepellent insulators, coded locks with 2 brass keys. For 6-36V DC
applications.
4-Position
Acc
Off – Ignition – Ignition/Start
Off
Ign
Off
Ign/Start
Ign/Acc
Ign/Start
Key is removable only in the Off position, spring return to IGN/ACC.
Electrical ratings at 12V DC:10A Accessory, 5A Ignition, 5A Start.
See also 95060 Series switches on page 1.
M-712 BP
Four brass screw terminals. Brass case and mounting hardware,
chrome-plated brass facenut. Brass mounting stem 13/16" -24,
1 7/32" (31.0mm) long, fits panels up to 1" (25.4mm).
Rapid ship item. 2
BP
Available in retail clamshell pack. 4 = Ignition
5 = Ignition
6 = Battery
Terminals 1 and 6 are connected interna
Terminals 4 and 5 are connected interna
x
x
TERMINALS
1 = Battery
2 = Start
3 = Accessory
Key is removable only in the Off position, spring return to IGN.
Electrical ratings at 12V DC: 10A Ignition, 5A Start. See also
95060 Series switches on page 1.
M-550 With Screw Terminals BP
Three brass screw terminals. Brass case and mounting hardware,
chrome-plated brass facenut. Brass mounting stem 13/16" -24,
1 7/32" (31.0mm) long, fits panels up to 1" (25.4mm).
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
ignition switches
M-550-14 With Rubber Boot Assembly BP
Same as M-550, except with weather-resistant rubber boot and
mounting nut assembly to protect against moisture and dirt with
or without the key inserted.
A
With Push-To-Choke
M-832 Plastic Body BP
Key is removable only in the Off position, spring return to IGN.
Electrical ratings at 6-36V DC: 15A Ignition, 5A Start. Six nickelsilver screw terminals. Durable plastic case and stem with PVC
boot for added weather protection. Long mounting stem 2.00"
(50.8mm) long, fits panels up to 1 3/8" (34.9mm) thick, and with
7/8" diameter hole (22.2mm) Fits many boats, including Bayliner,
ChrisCraft, Sea Ray.
M-550-25 With Protective Cap
Same as M-550, except with a captive plastic cap that snaps over
a special facenut to protect the lock when not in use. Fits panels
up to 5/8” (15.9mm).
M-932
Key is removable only in the Off position, spring return to IGN.
Electrical ratings at 12V DC: 5A Ignition, 5A Start, 2A Choke.
M-6110-01 Weather-Resistant
Same as M-550, except with O-ring seal in the mounting stem,
and with spring-actuated shutter in the lock face to protect the
cylinder when not in use.
One brass screw and three brass blade terminals. Brass case and
mounting hardware, chrome-plated brass facenut. Brass mounting
stem 13/16" -24, 15/16" (23.8mm) long, fits panels up to 1/2"
(12.7mm). O-ring seal in the mounting stem.
M-711 With Diecast Case
Three brass screw terminals. Diecast case with protective finish.
Mounting stem 3/4" -20, 13/16" (20.6mm) long, fits panels up
to 1/4" (6.4mm). Knurled aluminum adapter facenut permits
mounting in 3/4" (19.1mm) to 7/8" (22.2mm) diameter holes.
Off
Ign
Push to Choke
Ign/Start
Custom Keys
M-850 Plastic Body BP
Key is removable only in the Off position, spring return to IGN.
Electrical ratings at 6-36V DC: 15A Ignition, 5A Start. Three nickelsilver screw terminals. Durable plastic case and stem with PVC boot
for added weather protection. Mounting stem fits panels up to 7/8”
(22.2mm) thick, with 7/8” diameter hole. Fits many boats, including
Baja, Celebrity, Chapparal, ChrisCraft, Crestliner, Crownline, Four
Winns, Larson, Luhrs, Mariah, Powerquest, Rinker, S2 Yachts,
Silverton Yacht, Thompson, Thunderbird (Formula), Wellcraft.
Rapid ship item. BP
Available in retail clamshell pack. We made this elegant key
to grace the keyrings of Cobalt boat owners.
The keys will start their beautiful boats using
reliable Cole Hersee ignition switches.
Whether you want a glossy or embossed logo key, we can do that.
Ask us!
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
3
ignition switches
A
2-Position
A3 Specialized ignition switches
Key is removable only in the Off position.
Diesel Ignition and Start Switches
M-489 BP
Electrical ratings at 12V DC: 10A Ignition. Two brass screw
terminals. Brass case and mounting hardware, chrome-plated
brass facenut. Brass mounting stem 13/16" -24, 1 7/32"
(31.0mm) long, fits panels up to 1" (25.4mm).
See also 95060-07 on page 1.
These heavy-duty switches provide a superior pre-heat circuit to
energize the glow plugs.
956-9100
4-Position
Key removable at Off, spring return to IGN/ACC, spring return
from FUEL. Electrical Ratings at 12V DC: 10A Fuel, 10A Accessory,
5A Ignition, 5A start. Five screw terminals. Diecast case. 1" -24
mounting stem, with O-ring seal, fits panels up to 3/32" (2.4mm).
Gasket-sealed terminal insulator. Hencol key is 83357.
Off
On (Ign)
Off
M-489-03 Weather-Resistant
Electrical ratings at 12V DC: 10A Ignition.Same as M-489, except
with O-ring seal in the mounting stem, and with spring-actuated
shutter in the lock face to protect the cylinder when not in use.
Fuel
Ign/Acc
Ign/Start
M-497 With Lever BP
Electrical ratings at 12V DC: 10A Ignition. Two brass screw
terminals. Brass case, brass mounting stem 1/2" -20, 1 1/4"
(31.8mm) long, fits panels up to 7/8" (22.2mm). chrome-plated
diecast long lever.
95033
3-Position
Spring return to Off. Electrical Ratings at 12V DC: 50A Glow Plug,
10A Start. Three screw terminals. Plated steel case. 5/8" -32
mounting stem, with O-ring seal, fits panels up to 1/4" (6.7mm).
Silver contacts.
Off
Glow
Glow/Start
M-702 With Diecast Case
Electrical ratings at 12V DC: 10A Ignition. Two brass screw terminals. Diecast case with protective finish. Mounting stem 3/4" -20,
13/16" (20.6mm) long, fits panels up to 1/4" (6.4mm). Knurled
aluminum adapter facenut permits mounting in 3/4" (19.1mm)
to 7/8" (22.2mm) diameter holes.
Push-Pull Ignition & Start Switch
M-676 BP
Electrical ratings at 12V DC: 5A Ignition. Two brass screw
terminals. Brass case with chrome-plated integral bezel. Brass
mounting stem 3/4" -27, 3/4" (19.1mm) long, fits panels up to
5/8" (15.9mm). Double bit keys.
9576
Spring return to IGN/ACC. Electrical Ratings at 12V DC: 10A
Accessory, 5A Ignition, 5A Start. Four screw terminals. Plated
steel case. 3/8" -24 mounting stem fit panels up to 3/16"
(4.8mm). Includes hexnut and washer for mounting. Black
plastic screw-on knob.
Off
Rapid ship item. 4
BP
Available in retail clamshell pack. Ign/Acc Ign/Start
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
ignition switches
2-Circuit Switches
A
A4 Accessories
M-703
Key removable in both positions. Electrical ratings at 12V DC: 10A
both positions. Three brass screw terminals. Diecast case. Mounting stem 3/4" -20, 13/16" (20.6mm) long, fits panels up to 1/4"
(6.4mm). Knurled aluminum adapter facenut permits mounting in
3/4" (19.1mm) to 7/8" (22.2mm) diameter holes.
On 1
On 2
Protective Boots
Mounting nut containing a durable rubber disk with a self-closing key
slot.
83285-01 Aluminum
3/4" -20 thread, 7/16"
(11.1mm) thickness.
83288 Chrome-Plated Brass
13/16" -24 thread, 17/32"
(13.5mm) thickness.
BP
Plastic Cap
Magneto Ignition & Start Switch
95520-B 70A Start
Electrical ratings at 12V DC: 70A Start, 1A Magneto. Three screw
terminals. Plated steel case. 5/8" -32 mounting stem with O-ring
seal, fits panels up to 1/4" (6.4mm). Long Hencol key number
83353.
97298
Captive black protective cap,
used with facenut 83295-A
Keys for Cole Hersee
Ignition Switches
83379
For most keyed ignition switches in this catalog except
95060 series and 95520-B.
Off - Mag terminal to ground
Run - Mag & S terminal open
Start - Mag terminal open,
S terminal to battery
Key removable in Off position, spring return
to RUN. Self-grounding in the Off position in metal panels.
M-924 With Push-To-Choke
Marine 3-position magneto ignition and battery start switch.
Key removable in Off position, spring return to RUN. Electrical
ratings at 12V DC: 2A Magneto, 10A Battery/Ignition, 3A Choke,
5A Start. Six brass screw terminals. Brass case and mounting
hardware, chrome-plated brass facenut. Brass mounting stem
13/16" -24, fits panels up to 15/16" (23.8mm). O-ring seal in
the mounting stem.
Off
Run
Push to Choke
Battery/Start
Rapid ship item. BP
Available in retail clamshell pack. Keys for 95060 Ignition Switch
Key entryway on the switch and its matching key are stamped
with a three-digit code. Order the part number that matches the
code, or use the blank key to make a copy of your key.
Keycode
Part Number
Blank key
601
602
603
604
605
701
702
703
704
705
83451-1
83451-601
83451-602
83451-603
83451-604
83451-605
83451-701
83451-702
83451-703
83451-704
83451-705
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
5
ignition switches
A
Find The Right Ignition Switch
Part Number Description
Case
Bushing
Sealing
Anti-restart
4-position
956-9100
Glow-Acc-Run-Start. Mom start
Diecast
1
O-Ring seal in bushing and gasket seal in base
No
95060
Acc-Off-Run-Start. Mom start
Plastic
M22x 1.5
Fully sealed to IP67
No
95060-01
Acc-Off-Run-Start. Mom start
Plastic
M22x 1.5
Fully sealed to IP67
Yes 95060-02
Acc-Off-Run-Start. Stable start
Plastic
M22x 1.5
Fully sealed to IP67
No
95060-50BP
Acc-Off-Run-Start. Mom start
Plastic
M22x 1.5
Fully sealed to IP67
No
M-700
Acc-Off-Run-Start. Mom start
Diecast
3/4
None
No
M-712
Acc-Off-Run-Start. Mom start
Brass
13/16
None
No
M-712-02
Acc-Off-Run-Start. Mom start
Brass
13/16
O-Ring seal in bushing
No
M-712-09
Acc-Off-Run-Start. Mom start
Brass
13/16
Boot in Face Nut
No
M-95502
Acc-Off-Run-Start. Mom start
Diecast
3/4
None
No
3-position
95033
Mom On-Off-Mom On. (Glow-Off-Start)
Plated Steel
5/8
O-Ring seal in bushing and Hencol seal in base
No
95060-03
Off-Run-Start. Mom start
Plastic
M22x 1.5
Fully sealed to IP67
No
95060-04
Off-Run-Start. Mom start
Plastic
M22x 1.5
Fully sealed to IP67
Yes
95060-05
Off-Run-Start. Stable Start
Plastic
M22x 1.5
Fully sealed to IP67
No
95060-06
Acc-Off-Run. NO Start
Plastic
M22x 1.5
Fully sealed to IP67
No
95060-60BP
Off-Run-Start. Mom start
Plastic
M22x 1.5
Fully sealed to IP67
No
M-550
Off-Run-Start. Mom start
Brass
13/16
None
No
M-550-14
Off-Run-Start. Mom start
Brass
13/16
Boot in face nut
No
M-550-25
Off-Run-Start. Mom start
Brass
13/16
Protective Cap
No
M-711
Off-Run-Start. Mom start
Diecast
3/4
None
No
M-832
Magneto. Off-Run-Start. Mom start
Plastic
13/16
O-Ring seal in bushing
No
M-850
Off-Run-Start. Mom start
Plastic
13/16
O-Ring seal in bushing
No
M-924
Magneto. Off-Run-Start. Mom start
Brass
13/16
O-Ring seal in bushing
No
M-932
Off-Run-Start. Mom start
Brass
13/16
O-Ring seal in bushing
No
M-6110-01
Off-Run-Start. Mom start
Brass
13/16
O-Ring seal in bushing
No
95520-B
Magneto. Off-Run-Start, Mom Start
Plated Steel
5/8
O-Ring seal in bushing
No
2-position
95060-07
Off-Run
Plastic
M22x 1.5
Fully sealed to IP67
No
M-489
Off-Run
Brass
13/16
None
No
M-489-03
Off-Run
Brass
13/16
O-Ring seal in bushing, and shutter
No
M-497
Off-Run
Brass
1/2
None
No
M-676
Off-Run
Plated Steel
3/4
None
No
M-702
Off-Run
Diecast
3/4
None
No
M-703
On 1-On 2
Plated Steel
3/4
None
No
Rapid ship item. 6
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
ignition switches
Code Type
Key Code
Actuator
Key Blank
A
Other Info
4-position
Keyed Alike
N/A
Short Hencol
83357
Mixed
CH600-CH799
Metal Key with Boot
83451-1 Mixed
CH600-CH799
Metal Key with Boot
83451-1 Mixed
CH600-CH799
Metal Key with Boot
83451-1 Mixed
CH600-CH799
Metal Key with Boot
83451-1 Mixed
250 Combinations
Metal Key
83379
10 Codes
CH500-CH523
Metal Key
83379
10 Codes
CH500-CH523
Metal Key
83379
10 Codes
CH500-CH523
Metal Key
83379
10 Codes
CH500-CH523
Metal Key
83379
Diesel start circuit with momentary glow plug position
Kit 95060 with connector and pigail harness
Loose Hardware
Blade Terminals
3-position
N/A
N/A
Long Lever
Mixed
CH600-CH799
Metal Key with Boot
83451-1 Mixed
CH600-CH799
Metal Key with Boot
83451-1 Mixed
CH600-CH799
Metal Key with Boot
83451-1 Mixed
CH600-CH799
Metal Key with Boot
83451-1 Mixed
CH600-CH799
Metal Key with Boot
83451-1 10 Codes
CH500-CH523
Metal Key
83379
No Acc terminal
Mixed
CH500-CH523
Metal Key
83379
No Acc terminal
10 Codes
CH500-CH523
Metal Key
83379
Snapcap.No Acc terminal
Mixed
250 Combinations
Metal Key
83379
No Acc terminal
5 Codes
Metal Key
Push-to-choke
5 Codes
Metal Key
Push-to-choke
12 Codes
CH500-CH523
Metal Key
83379
Push-to-choke
7 Codes
CH500-CH523
Metal Key
83379
Push-to-choke
10 Codes
CH500-CH523
Metal Key
No Acc terminal
Keyed Alike
CH500-CH523
Metal Key
No Acc terminal
2-position
Mixed
CH600-CH799
Metal Key with Boot
83451-1 10 Codes
CH500-CH523
Metal Key
83379
Long Neck
10 Codes
CH500-CH523
Metal Key
83379
Long Neck
N/A
N/A
Long Lever
Mixed
250 Combinations
Metal Key
Mixed
250 Combinations
Metal Key
83379
Metal Key
83379
Mixed
Rapid ship item. BP
Available in retail clamshell pack. Key removable in both positions
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
7
notes
A
Find The Right Switch
Function
Switch Type
Rocker Switch
SPST On-Off
56027-01, 58027-01, 58311-01, M-58031-01
5520, 5582, 5582-10, 5582-30, 55014,
55014-05, 55023, 55055, 55055-01, 54100,
54100-01, M-484, M-493, M-584, M-586
General On-Off
SPST On-Off, illuminated
54003, 54003-01, 54012, 56327-01, 58312-A2,
58312-R2, 58312-C4, 58312-G2, 58312-G4,
58312-A4, 58312-R4, 58312-GA4, 58312-RG4,
58312-RR4, 58327-01, 58328-01, 58328-02,
58328-04, 58328-10, 58328-11, 58328-12,
58328-13, 58328-40, 58328-47, 58328-49,
58328-100, 58328-101, 58328-104
54109, 54109-01, M-54111-01
Horn
SPST Mom On-Off
58027-02, 58311-02, 58332-20, M-58031-07
55020, 55020-04, 55037, 55049-01, 55052-01,
54101, 54101-01
2 Tank Fuel Gauge
SPDT On-On
54010
Single Wiper
SPDT Mom On-Off-On
58332-23
55088
General On-Off
Lighting
SPDT On-Off-On
M-58031-02, 56000-03, 57003-16, 54001-02
54103, 54103-01, 5586, 55016, 55016-06,
55036, 55036-14
Lighting
DPST On-Off
58027-06, 58311-06, M-58031-04
54105, 54105-01,
Lighting
DPST On-Off, illuminated
58332-29
Trim Tabs or Windlass
SPDT Mom On-Off-Mom On
58027-04, 58311-04, 58332-22, 58332-24
SPDT On-On, illuminated
58312-RG2, 58312-RR2, 58327-06, 58328-08,
58328-16, 58328-22, 58328-102
Bilge Pump
SPDT On-Off-On, illuminated
58312-RC, 58312-RR, 58312-AG, 58312-AR
58312-RG, 58327-06, 58332-21, 58328-06
58328-25, 58328-26, 58328-33, 58328-35
58328-36, 58328-103
Courtesy Lights
DPST Mom On-Off
58332-28
DPDT On-On
58027-08, 58311-08, M-58031-06
DPDT On-Off-On
58027-07, 58311-07, 58311-11, M-58031-05
54107, 54107-01
Trim Tab, Windlass
SPDT Mom On-Off - Mom On
M-58031-08, 56012-04, 57004-10, 58332-22,
58332-24
54104, 54104-01, 55021, 55021-04, 55021-07,
55021-08, 55033-01, 55033-02
Trim Tabs
DPDT On-Off-On, illuminated
58332-26
Windlass
DPDT Mom On-Off-On
58027-11, 58332-27, M-58031-09
Wiper with Mist
DPDT Mom On-Off-On,
illuminated
58332-25
Ignition/Start
DPDT Mom On-On-Off
58022-03, 58311-13
59071, 55094
Reversing
DPDT Mom On-Off-Mom On
58027-18, 58311-18
55046-06
2-Speed Heater Fan
DPDT
Bilge Pump
Locking Switch
Rapid ship item. BP
54104, 54104-01
54110, 54110-01, M-54111-02
55093
Emergency Cutoff
8
Toggle Switch
M-597
SPST On-Off
Available in retail clamshell pack. 58336
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
B
rockers & toggles
Rocker Switches
Toggle Switches
Wiring Diagrams
B1 Rocker Switches
Sealed Switches with Pilot Lights
25A at 12V DC. LED or incandescent. These general purpose switches
are suitable for many kinds of marine applications. They are weatherresistant with contact areas sealed to IP66 (high pressure wash resistant). Switches snap into standard rocker switch holes 1.45" x 0.08"
(36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm).
Pilot lights are independent or dependent, as noted. They have silver
contacts, which give superior switching performance. Housing is
matte black.
B1
B2
B3
Regular Lens 58328 Series
These have incandescent illumination and brass blade terminals.
The BP kits come with a selection of snap-in lenses. For switches
without pilot lights see page 11.
Wiring your switch: There are up to 6 terminals on this switch series.
Identify each type of switch by matching it with the appropriate wiring
diagram in each section. Diagrams represent the switch as seen
from the back. Dotted lines indicate the internal connections of the
pilot light(s).
LED Wide Lens 58312 Series
These have bright LED illumination with high-visibility
wrap-around lenses. Corrosion-resisitant nickel-plated
brass blade terminals provide good electrical contact.
For switches without pilot lights see page 11.
Small Lens 56327/58327 Series
These are identical to 58238 series with incandescent bulbs,
but they have one or two small circular lenses. 56327 series has
brass screw terminals, 58327 series has brass blade terminals.
For switches without pilot lights see page 11.
W
NE D
LE
Dependent/Independent
Dependent pilot light is On when the switch is actuated and the
load is energized. Independent pilot is turned On by an external
switch, with load either On or Off.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
9
rockers & toggles
B
SPST On-Off,
Dependent and Independent
Single Pole, Single Throw. Four blade terminals.
SPST On-Off, Dependent
4
Single Pole, Single Throw, with dependent illumination.
Three blade terminals.
+
B
4
B
+
2
3
L
2
3
L
Lens color
LED wide lens
Red Red
58312-RR4
Lens color
LED wide lens
Incandescent
Green Amber
58312-GA4
58312-RG4
58312-R4
58328-04
56327-01
58327-01
Red Green
Red
Lenses of each color
–
BP
BP
Green
58312-G4
58328-11
Clear
58312-C4
58328-12
Amber
58312-A4
58328-13
One lens of each color
–
58328-100BP
Incandescent
*
58328-40
*
56328-49
58328-47
58328-104BP
BP
Single Pole, Double Throw. Both pilots are dependent illumination.
Four blade terminals.
SPST On-Off, Independent
1
Single Pole, Single Throw, with independent illumination. Four
blade terminals. To convert an independent switch to dependent,
connect a jumper wire between terminals 3 and 6, and ground
terminal 4 as shown.
+
4
L
B
2
3
+
6
2
3
L
+
B
4
BP
SPDT On-On, Dependent
L1
B
6
4
2
3
L2
Lens color
LED wide lens
Incandescent
Green Green
–
58328-08
Red Red
58312-RR2
58328-16, 58327-06
Red Green
58312-RG2
56328-22
Lenses of each color
–
58328-102BP
BP
6
Jumper
Independent converted
with jumper wire to
dependent
Independent
SPDT On-Off-On,
Dependent and Independent
Four blade terminals. Both pilots are dependent illumination.
Lens color
LED wide lens
Incandescent
Red
58312-R2
58328-01
Green
58312-G2
58328-02
Amber
58312-A2
56328-10
One lens of each color
–
58328-101BP
Rapid ship item. 10
BP
Available in retail clamshell pack. 4
B
BP
+
L
2
3
6
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
rockers & toggles
SPST On-Off
Lens color
LED wide lens
Red Clear
58312-RC
Green Green
–
58328-25
56027-01 On-Off
Red Red
58312-RR
58328-26, 58327-06
58027-01 On-Off
Amber Green
58312-AG
58328-33
58311-01 On-Off
Amber Red
58312-AR
58328-35
58027-02 Mom On-Off
Red Green
58312-RG
56328-36
58311-02 Mom On-Off
One lens of each
color & size
–
58328-103BP
*
Incandescent
Single Pole Single Throw. Two terminals.
58328-06
*
B
+
B
BP
L
BP
BP
SPDT On-Off-On
L1
1
Single Pole Double Throw. Three terminals.
+
B
Sealed Switches without Pilots
25A at 12V DC, 15A at 24V DC. General specifications are the same as
for the preceding 'Sealed Switches with Pilot Lights'. Sealed to IP66 for
water resistance. (high pressure wash.)
58027-03 On-Off-On
2
BP
L2
58311-03 On-Off-On
58027-04 Mom On-Off-Mom On
3
BP
58311-04 Mom On-Off-Mom On
58311 Series
These match the 'LED Wide Lens 58312 Series' on page 9.
DPST On-Off
Double Pole Single Throw. Four termninals.
58027-06 On-Off
B
58311-06 On-Off
+
L1
2
5
3
6
+
B
L2
DPDT Ignition-Start
Double Pole Double Throw. Four terminals.
58027 Series
These match the 'Regular Lens 58328 Series' on page 9.
B
+
L1
2
5
3
6
+
B
L2
58022-03 Mom On-On-Mom Off
Suitable for use as an ignition switch. Blade terminals. Differs
from 58327 series by having a glossy black finish.
58311-13* Mom On-On-Off
56327/58327 Series
These match the 'Small Lens 58328 Series' on page 9.
Find The Right
Rocker or Toggle
Typical applications are on page 8.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
11
B
rockers & toggles
DPDT On-On and On-Off-On
SPST
Double Pole Double Throw. Six terminals.
Single Pole, Single Throw
58027-08 On-On
58311-08 On-On
58027-07 On-Off-On
1
L1
+
B
BP
L2
4
2
5
3
6
L3
+
M-58031-01 SPST On-Off
B
B
BP
M-58031-07BP SPST Mom On-Off
L4
58332-20BP SPST Mom On-Off
58311-07 On-Off-On
+
2
3
L
BP
BP
SPST On-Off
58027-11 Mom On-Off-Mom On
SPDT
58311-11 On-Off-On
Single Pole, Double Throw
L
DPDT Forward & Reverse
Double Pole Double Throw. Four terminals.
58027-18
Mom On-Off-Mom On
M-58031-02BP SPDT On-Off-On
L
B
_
1
4
2
5
+
BP
B
3
SPDT On-Off-On
58332-22BP SPDT Mom On-Off-Mom On
58311-18
Mom On-Off-Mom On
2
L
58332-21BP SPDT
On-Off-On Amber, 24V BP
Two amber LED pilot lights.
B
1
+
BP
58332-23BP SPDT On-Off-Mom On, Amber, 24V BP
One amber LED pilot light. Recommended for use with 48513
Compact Low Voltage Disconnect. See page 37.
Sealed 58031 & 58332 Series
20A at 12V, 15A at 24V DC. Switches with LED pilot lights must be used
at the stated voltage only. M-58031 switches have a black actuator;
58332 switches are supplied in retail BP only and are supplied with one
black and one gray snap-on actuator.These general-purpose switches
are suitable for all kinds of applications. They are weather-resistant
with contact areas sealed to IP66 (high pressure wash-resistant).
Switches are uniform with Round Pilot Light series of switches and are
recognized at UL 1500 (Ignition protection for marine products). With
neoprene gasket/panel seal. These switches conveniently snap into a
standard rectangular mounting hole 1.48" x 0.83" (36.8 x 21.1mm) in
panels from 0.09" to 0.19" thick (2.4 x 4.7mm). Plastic housing, bezel
and actuator. Silver contacts, Brass blade terminals. Imprinting available.
58332-24BP SPDT Mom On-Off-Mom On
Mom On 2&3-Off-Mom On 1& 2.
BP
DPST
Double Pole, SIngle Throw
+
B
M-58031-04BP DPST On-Off
L
BP
58332-28BP DPST Mom On-Off
2
5
3
6
+
B
L
DPST On-Off
BP
58332-29BP DPST On-Off, Amber 24V
One amber pilot light.
BP
DPDT
Double Pole, Double Throw
L
B
1
+
L
M-58031-05 DPDT On-Off-On
M-58031-06 DPDT On-On
Wiring your switch: There are up to 8 terminals on
this series of switches. Identify each type of switch
by matching it with the appropriate wiring diagram in
each section. Diagrams represent the switch as seen
from the back.
Rapid ship item. 12
BP
Available in retail clamshell pack. 8
7
1
4
2
5
3
6
L
4
2
5
3
6
+
B
L
DPDT On-On or
On-Off-On
M-58031-09 DPDT Mom On-Off-Mom On
58332-25BP DPDT On-Off-Mom On, Amber 24V BP
One amber LED pilot light. Pilot connects internally between
terminals 4 & 6.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
rockers & toggles
58332-26BP DPDT On-Off-On, Amber 24V BP
Two amber LED pilot lights. Pilot 1 connects internally between
terminals 3 & 7, Pilot 2 between 1 & 7.
58332-27BP DPDT Mom On-Off-Mom On
B
Low Current Rocker Switches
For ultra-low voltage applications, and currents up to 30mA.
BP
58500 SigmaTM Rocker Switches
Compatible with microprocessor-based electrical/electronic systems,
the Sigma Rocker switch is a low-current membrane switch with a
user-friendly conventional rocker switch feel. Complete with reliable
LED backlighting. Water-resistant switch is suitable for marine, or
adverse conditions.
Imprinted Switches
These are some of the symbols that are available for the switches
in the 58031 and 58332 series. These custom imprints are available. Minimum quantities may apply. Consult Cole Hersee.
Running lights
under power
Propulsion
system trim
Bilge pump
Engine stop
Light
Master
light switch
Horn
Blower
Windshield
washer
Windshield
wiper
Potable water
pressure
Engine start
Trim tab
Anchor light
Interior light
Work light
Bilge
blower
Drive tilt
Anchor
Water
flushing tap
Work lamp
Warm
air blower
Battery
Depth
sounder
Water tank
Bilge pump 1
58336 Locking Switch
Fuel
1
2
Bilge pump 2
SPST On-Off. Bright orange lock automatically locks the actuator
when in the Off position, and must be slid to allow the actuator to
be moved to the On position. Matte black finish housing, bezel and
actuator. Two blade terminals. 20A at 12V DC.
3
Bilge pump 3
This switch functions as a SPDT Mom On 1-Off-Mom On 2.
Accepts a standard Molex connector or 6 pin x 0.025” square pin
x 0.100” centers connector. LED power source: 5V DC. Maximum
contact rating: 30mA at 24V DC. Operating temperature range:
-40°C to 85°C Designed to meet SAE J1455 environmental
standard. Fits standard panel opening: 1.734” x 0.867”
(44.0 x 22.0mm), and panel thickness of 0.032” to 0.187”
(0.80 to 4.75mm).
Running/
anchor lights
Rapid ship item. Trim tab
BP
Drive tilt up
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
13
rockers & toggles
B
40205 SigmaTM Switch with Alarm
Narrow Rocker Switches
Uniform with the Sigma Switch 58500, the Alarm Switch features
a highly audible warning signal all contained in a standard rocker
switch package. Momentary switch provides a convenient user
interface:
Alarm condition override (snooze feature).
Remote input to system controller (ECU).
Remote maintenance reset switch.
Single Pole. Universal application, 10A at 12V DC
single pole switches. Black plastic, snap-in
mounting. Silver contacts, copper blade terminals.
To fit panel hole .550" x 1.125" (14.0 x 28.6mm).
The alarm switch can indicate status of various inputs such as door
ajar, high/low pressure, high/low temperature, on-off status, and
many other applications, as well as providing alarm and override for
the Cole Hersee SureStartTM Low Voltage Disconnect Switch 48510,
48511 & 48512.
1
B+
2
L
3
Narrow Body, Angled Actuator
10A at 12V DC. Black plastic switches snap in to panels 0.02 through
0.25" thick (0.5 to 6.4mm). Silver contacts, copper blade terminals.
54003 SPST On-Off, lighted red BP
Single Pole, Single Throw.
Red lighted actuator, Up: On, Down: Off.
Three blade terminals. Dependent illumination.
54003-01 SPST On-Off, lighted amber
Single Pole, Single Throw. Amber lighted actuator,
Up: On, Down: Off, Three blade terminals. Dependent illumination.
Narrow Body, Curved Actuator
10A at 12V DC. Black plastic switches snap in to panels 0.025 through
0.20" thick (0.64 to 5.2mm). SIlver contacts, copper blade terminals.
Battery+ Red
54010 SPDT On-On BP
Single Pole, Double Throw.
Black rocker. Can also be used
as an On-Off by ignoring and
isolating terminal 1 or 3.
Manual Override Violet
Warning White
Battery+ Blue
Warning Black
Alarm
LED
The switch functions as a SPST Mom On-Off. Specifications are
the same as 58500 Sigma Rocker, except: Wire leads: GXL wire,
18AWG (0.80mm sq) x 6” long (152.4mm). LED power source:
5V or 12V DC. Alarm power source: 12V DC.
54012 SPST On-Off Lighted Red
Single Pole, SingleThrow.
Red rocker, lighted in On position.
Dependent illumination.
SPST, DPDT?
Saves Batteries
Understand what these electrical descriptions mean.
See page 20 .
1
LOAD
On 2 & 3
2
BAT
+
On 1 & 2
No more dead batteries! Low Voltage Disconnect Switches
automatically disconnect non-critical loads when battery voltage
is low; automatically reconnect when battery is being charged.
See pages 37 and 38.
Rapid ship item. 14
BP
Available in retail clamshell pack. LOAD
3
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
rockers & toggles
Rocker Switch Accessories
Bracket Mounting Kit 87167-01BP
B
BP
Bezels for mounting
switches side by side
For snap-in mounting of any regular size switch such as 56027, 58031,
58332, 58311 and 58312 series. Bezels can be arranged in a parallel
array of any length. Bezels themselves can snap into a panel, or be
mounted with the Bracket Mounting Kit. Height 1.90" (48.3mm). Two
units are 2.37"W x 2.30"H (60.2 x 58.4mm). Mounting hole in panel
should be 2.02"W x 1.90"H (51.3 x 48.3mm) for two bezels.
Add 1.03"W (26.2mm) for each additional unit.
87167-01BP BP
For installing an array of switches onto a panel, when throughmounting isn’t possible. Use in conjunction with 82159 bezels.
Holds from 2 to 6 bezels (not included). Snap-together assembly:
no special tools needed. Available only as a retail BP unit, which
contains two bracket sections and brass stabilizing rods.
Kit brackets engage with bezels. Brass rods snap into brackets to
stabilize the unit.
Assembled kit mounts on top of or under the panel. Mounting holes
.710" x .265" (18.0 x 6.7mm).
82159-1 end bezel
BP
Build Your Own Switch
82159-2 center bezel
Can be ganged, and used
with end bezels.
Five handy kits cover all the electrical types and pilot light
combinations. Each kit comes with a set of snap-in pilot light
lenses, so it's easy to make up a switch with the lens color
you need.
82159-3 independent bezel
Fits panel opening 1.9" x 0.98"
(48.3 x 25.0mm).
The five kits are individually retail-packed in clamshell BP units.
58328-100BP On-Off SPST, dependent
With one each Amber, Clear, Green, and Red lens.
58328-101BP On-Off SPST, independent
98628 plug
Snaps in to 82159-1 or 82159-2 or
standard rocker switch cutouts.
WIth one each Amber, Clear, Green and Red lens.
58328-102BP On-On SPDT, dependent
With two each Amber, Clear, Green and Red lenses.
58328-103BP On-Off-On, dependent
82159-02BP BP
Contains 2 end bezels, one center bezel, one plug.
With one each large Amber, Clear, Green, Red and one each
small lenses.
58328-104BP On-Off SPST, one dependent, one independent
With one each large Amber, Clear, Green, Red and one each
small lenses.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
15
rockers & toggles
B
B2 toggle switches
Paddle Handle Toggle Switches
Standard (black) or (clear) lighted handle, 11/16" (17.5mm) long.
Mounting stem 15/32" - 32 thread, 15/32" (11.9mm) long, fits panels
up to 1/8" (31.8mm) thick. Includes mounting hardware – black metal
facenut and nickel-plated hexnut. 0.25" (6.35mm) blade or 6-32 screw
brass terminals. 25A at 12V DC. Wiring diagrams on page 21.
54110 SPDT On-Off-On, illuminated
On: red pilot, Off, On: white pilot. Five screw terminals.
O-ring seal in bushing. Independent illumination. Wiring K.
54110-01 SPDT On-Off-On, illuminated
On: red pilot, Off, On : white pilot. Five blade terminals.
O-ring seal in bushing. Independent illumination. Wiring K.
55036 SPDT On-Off-On, PVC-coated BP
Three 9.5" (241.3mm) leads with tinned brass terminals.
O-ring seal in stem. Wiring B.
55036-14BP SPDT On-Off-On, PVC-coated BP
Same as 55036, but with rubber boot. WIring B.
55088 SPDT On-Off-Mom On
Three screw terminals. Wiring B.
Standard Switch
Illuminated Switch
SPST
DPST
Single Pole, Single Throw
Wiring diagrams
on page 21.
Double Pole, Single Throw
54100 SPST On-Off BP
Two screw terminals. Wiring A.
54105 DPST On-Off
Four screw terminals. Wiring C.
54100-01 SPST On-Off BP
Two blade terminals. Wiring A.
54105-01 DPST On-Off
Four blade terminals. Wiring C.
54101 SPST Mom On-Off
Two screw terminals. Wiring A.
DPDT
54101-01 SPST Mom On-Off
Two blade terminals. Wiring A.
Double Pole, Double Throw
54109 SPST On-Off, illuminated BP
On: red pilot, Off: white pilot. Four screw terminals.
O-ring seal in bushing. Independent illumination. Wiring G1.
54107 DPDT On-Off-On
Six screw terminals. Wiring E.
54107-01 DPDT On-Off-On
Six blade terminals. Wiring E.
BP
54109-01 SPST On-Off, illuminated
On: red pilot, Off: white pilot. Four blade terminals.
O-ring seal in bushing. Independent illumination. Wiring G1.
SPDT
Dependent or
Independent?
Single Pole, Double Throw
54103 SPDT On-Off-On BP
Three screw terminals. Wiring B.
Dependent Illumination
When the switch is On, the handle is illuminated.
54103-01 SPDT On-Off-On
Three blade terminals. Wiring B.
54104 SPDT Mom On-Off-Mom On
Three screw terminals. Wiring B.
BP
54104-01 SPDT Mom On-Off-Mom On
Three blade terminals. Wiring B.
Rapid ship item. 16
BP
Available in retail clamshell pack. Independent Illumination
Actuation of the switch does not affect the illumination of the
handle. The switch can be On or Off, and illumination is usually
controlled by another switch. This mode can be used to light
a whole bank of switches, and is especially useful for locating
switches in the dark. A switch with independent illlumination can
be converted to a dependent switch by adding a jumper wire.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
rockers & toggles
Heavy Duty Toggle Switches, 25A
Standard or long handle. Universal application. Silver contacts.
Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32"
(11.9mm) long, and fits panels up to 9/32" (7.1mm) except where
stated otherwise. phenolic housing, with plated steel cap. Nickel-plated
brass mounting hardware. Blade terminals: .250 quick connect. Screw
terminals: 6-32 screws. 25A at 12V DC, 15A at 24V DC. See wiring
diagram A or A1 on page 21.
B
SPST
Single Pole, Single Throw.
5520 SPST On-Off BP
Up: On, Down: Off. Two screw terminals. O-ring seal.
5582 SPST On-Off BP
Up: On, Down: Off. Two screw terminals.
5582-10 SPST On-Off, PVC coated
Up: On, Down: Off. Two 8" (203.2mm) leads. O-ring seal.
Mounting stem is 11/32” (8.7mm) long, and fits panels up
to 3/16” (4.8mm) thick.
Standard handle,
11/16" (17.5mm) long.
Long handle,
1 1/2" (38.1mm) long.
5582-30BP SPST BP
Same as 5582-10, but with boot.
55014 SPST On-Off BP
Up: On, Down: Off. Two blade terminals.
55014-05 SPST On-Off
Up: On, Down: Off. Two blade terminals. O-ring seal in the stem.
PVC coated housing
with wire leads.
55023 SPST On-Off
Up: On, Down: Off. Two screw terminals with 2 blades attached.
55055 SPST On-Off, long handle BP
Up: On, Down: Off. Two blade terminals.
55055-01 SPST On-Off, long handle
Up: On, Down: Off. Two screw terminals.
SPST Momentary
Single Pole, Single Throw.
Toggle Boots
55020 SPST Mom On-Off BP
Up: Off, Center: Mom On. Two screw terminals.
55020-04 SPST Mom On-Off, PVC coated
Moisture- and dirt-resistant. PVC coated and sealed
with an O-ring seal in the stem.
Up: Off, Down: Mom On.
Two 8" (203.2mm) leads.
Durable silicone rubber bonded to a standard brass hexnut When
tightened onto the stem of a toggle switch, the rubber forms
an o-ring seal with the panel. Boot covers a standard 11/16”
(17.5mm) toggle.
81264 gray
81264-04 green
BP
81264-01 black
BP
81264-05 red
81264-02 blue
81264-06 brown
81264-03 clear
81264-07 yellow
81264-08 orange
Rapid ship item. BP
Available in retail clamshell pack. 55037 SPST Mom On-Off
Up: Off, Center: Mom On. Two blade terminals.
55049-01 SPST Mom On-Off
Up: On, Down: Mom Off. Two blade terminals.
55052-01 SPST Mom On-Off, long handle
Up: On, Center: Mom Off. Two blade terminals.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
17
rockers & toggles
B
Lighted Tip Toggle Switches
On-Off Switches, 10A
Tip of handle is illuminated Red in the On position, illuminated Clear
in the Off position. Silver contacts. 15/32" -32 thread mounting stem.
Nickel-plated brass hexnut. Black plastic handle, housing and facenut.
Keyway in the down position. Blade terminals. Independent illumination.
25A at 12V DC.
Single Pole, Single Throw. Standard or ball (short ) handle. Silver
contacts. Chrome-plated brass handle, facenut and mouting stem.
Mounting stem is 15/32" – 32 thread, 15/32" (11.9mm) long, and
fits panels up to 9/32" (7.2mm) thick. Two terminals – screw, blade
or 6" (152mm) leads. 10A at 25V DC.
M-484 Standard Handle, Screw Terminals
M-493 Ball Handle, Screw Terminals
BP
M-584 Standard Handle, Wire Leads
BP
BP
M-586 Standard Handle, Blade Terminals
B
+
B
2
L
L1
4
3
+
Independent, SPST
B20 M-54111-01 Diagram
4
2
L2
6
1
3
6
Independent, SPDT
B20 M-54111-02 Diagram
Specialized Switches
M-54111-01 SPST On-Off BP
Single Pole, Single Throw. Up: On, Down: Off. Four blade terminals.
Independent illumination. To convert to dependent ilumination (see
SPST schematic above), connect B+ to 2, remove connection from
6, and add a jumper between 3 and 6.
M-54111-02 SPDT On-Off-On BP
Single Pole, Single Throw. Up: On, Center: Off, Down: On.
Five blade terminals. Dependent illumination.
55046-06 Reversing Polarity Switch
Momentary On-Off-Momentary On. Four blade terminals.
O-ring seal in stem. Long handle.
55093 2-Speed Fan/Blower Switch
DPDT On Battery & high speed 5&6 – On battery & low speed
3&5 – Off. Three blade terminals. Silver contacts. 25A at 12V DC.
5
Super-Bright LEDs
3
L
6
B
H
B Battery+
H High speed
L Low speed
B24 55093 Diagram
PVC-Dipped Switches
New 58312 series rocker switches have long-lasting LED lights
and high-visibility wrap-around lenses. See page 9.
Rapid ship item. 18
BP
Available in retail clamshell pack. Switches coated in polyvinyl chloride plastic are completely sealed
at the rear, and can withstand adverse conditions, such as salt
spray. Add a boot to the toggle and the front is also protected.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
rockers & toggles
M-597 Emergency Cutoff Switch
BP
Weather-resistant switch provides added safety for boat operators. The
lanyard connects the boater to a switch which kills the ignition circuit if
the boater falls overboard, or is at an unsafe distance from the controls,
thus preventing a dangerous runaway situation. Unlike other devices,
the M-597 can be turned on again if need be by a boater other than
the operator.
B
Ignition/Start Switch
59071 White Plastic Handle
Mom On 1, 4& 5 - On 4& 5 - Off. Nickel-plated bushing and facenut.
Silver contacts 15/32" - 32 bushing. Three blade terminals.
25A at 12V DC.
Switch can be installed either in boat systems that require a grounded
emergency stop, or in systems that have an open circuit emergency
stop. The switch works on virtually any powerboat with an inboard or
outboard motor. Full wiring instructions are included. For safety, this
switch should only be installed by a technically competent person.
Switch housing dimensions 2 3/4" x 2" (69.9 x 50.8mm) requires a space
of 1/2" (12.7mm) behind the panel, and mounts in a 1 1/2" (38.1mm)
diameter hole. Rubber coated toggle switch is sealed to IP-66 to protect
against salt spray and water ingress. Strong self-retracting coiled lanyard
has a clip for attachment to the operator. 10A at 12-24V DC.
55094* Mom On-On-Off
Mom On 2 & 3, 5 & 6 - On 2 & 3 - Off. Standard handle.
Four screw terminals.
3- and 4-way lighting
3-way lighting permits a light (or set of lights) to be controlled
from two switches usually mounted in different locations. Similarly,
4-way lighting enables control from three switch locations.
With the lanyard
out of the housing.
3-WAY LIGHTING
1
B
+
1
2
2
3
3
For safety or lifesaving applications, the switch should be installed by
a qualified individual. User assumes all responsibility for determining
the suitability of this product for his application.
Use two SPDT
T On-On switches
such as 54010.
M-598 Replacement Lanyard BP
We recommend that the lanyard be replaced annually or if worn.
4-WAY LIGHTING
New Master Disconnect
1
B
+
1
3
2
1
6
5
4
2
2
3
58328-16
or
58027-05
3
58027-08
DPDT.
Add Jumper.
58328-16
or
58027-05
75920 Sealed Master Disconnect - See page 42.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
19
rockers & toggles
B
B3 wiring diagrams
BAT
SPST SPDT DPST DPDT
SP and DP refer to single pole and double pole, ST and DT refer to
single throw and double throw.
Pole refers to an independent arrangement of contacts, all connected
to a center contact or pivot.
SP switches have at least one electrical circuit.
DP switches have at least two independent circuits (and act
like two identical switches that are mechanically linked).
Do not confuse ‘pole’ with ‘terminal’. The DPST switch, for
example, has four terminals, but it is a DP, not a 4P switch.
Throw refers to the numbers of On positions a switch has.
ST switches close at least one circuit at only one position.
The other position of the handle is Off.
DT switches close at least one circuit in the Up position, as well
as the Down position (On-On). A DT switch can also have a center
position (frequently On-Off-On).
The following switch diagrams illustrate the most common types of
toggle and rocker switch.
BAT
On 2 & 3
BAT
2
On 1 & 3, 4 & 6
+
Off
LOAD
LOAD
3
DPST On-Off
Both load terminals can be energized at the same time.
They are independent of each other and could be of different
voltages.
LOAD
1
On 2 & 3, 5 & 6
LOAD
BAT
+
1
+
BAT
+
2
On 1 & 2, 4 & 5
+
LOAD
Off
LOAD
3
LOAD
3
DPDT On-On
Functions like two separate SPDT switches operated by
the same actuator. Only two loads can be On at a time.
SPST On-Off
1
LOAD
On 2 & 3
2
BAT
1
+
LOAD
On 1 & 2
LOAD
3
BAT
BAT
+
2
+
Off
On 1 & 2, 4 & 5
3
LOAD
1
LOAD
On 2 & 3, 5 & 6
LOAD
SPDT On-On
Only one of the loads can be energized at a time.
On 2 & 3
2
BAT
LOAD
DPDT On-Off-On
Functions like two separate SPDT switches operated by the
same actuator. Only two loads can be On at a time.
Off
+
On 1 & 2
LOAD
Single pole/throw and double pole/throw switches are by far the most
common switches, but triple and quadruple pole configurations are also
available. They are commonly denoted 3PST, 3PDT, 4PDT, etc.
3
SPDT On-Off-On
Only one of the loads can be energized at a time.
Rapid ship item. 20
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
rockers & toggles
SP & DP Switches
with 6 Terminal Locations
B
Switches with One Pilot Light
SPST On-Off, dependent
4
Dependent illumination.
Three terminals.
Diagrams represent both momentary contact or maintained
contact switches.
B
+
2
3
L
Switches without Pilot Lights
F
SPST ON-Off
Two terminals.
B
B
+
+
SPST On-Off, independent
1
Independent illumination. Four terminals.To convert an
independent switch into dependent, connect a jumper wire
from terminal 3 to terminal 6, and connect terminal 4 to ground.
2
3
L
3
L
A
A1
4
4
B
SPDT On-Off-On
B
2
L
3
B
1
L1
Three terminals.
+
+
G1
3
Independent illumination
DPST On-Off
B
5
G2
Switch converted to dependent
by adding jumper wire
+
+
1
+
4
B
SPST On-Off,
dependent & independent
Four terminals.
4
B
B
L1
3
6
6
Jumper
Switches with Two Pilot Lights
Four terminals.
2
3
L
6
B
+
2
2
L2
B
+
L2
L
3
C
L1
Six terminals.
B
+
L2
1
4
2
5
3
6
2
L
6
3
L
C1
DPDT On-On
+
6
H
L3
+
B
L4
SPDT On-Off-On,
or On-On, dependent
L1
Four terminals.
Both pilots dependent.
B
D
1
+
4
2
3
L2
J
DPDT On-Off-On
Six terminals.
L1
B
L2
+
1
4
2
5
3
6
L3
+
B
SPDT On-Off-On,
or On-On, independent
L1
L4
Four terminals.
Both pilots independent.
B
E
L2
+
1
4
2
5
3
6
K
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
21
B
rockers & toggles
How to Identify a 6-terminal switch
How to select the right switch
You can find out the type of rocker or toggle switch by
a quick visual inspection.
1. Rocker or Toggle?
It’s your choice - Cole Hersee has rockers and toggles available
in all electrical configurations, and in different styles.
Look at the back of the switch, where the terminals are.
Notice that there are six possible terminal positions.
2. Switch rating: very important
Toggle and rocker switches are designed so that each vertical set
of terminals makes up one pole.
Pole 1
Pole 2
1
4
2
5
3
6
a) You need to know the voltage of your system (12V or 24V).
b) You need to know how much current will be running in the
circuit being switched. Always select a switch equal to or greater
in amperage to the amperage rating of the circuit in your
application.
3. Switch configuration
Check out the diagram in this section that explains the difference
between single/double pole and single/double throw. Switches
are marked SPST, SPDT, DPST or DPDT.
You can see immediately that a switch with three verticallyorganized terminals must be a SPDT. Now check the actuator
(rocker or toggle handle) to see if the switch is 2-position or
3-position.
If it only has two terminals, it must be a SPST, the simplest
of all switch configurations. Notice that the two terminals are
organized vertically (never side-by-side). Terminals can be
located at 1 and 2, 1 and 3, or 2 and 3.
If it has terminals at 1, 3, 4 and 6, it must be a DPST. You can
see that it utilizes the left side (pole 1) and right side (pole 2)
of the switch — two poles (DP).
If it has six terminals, it’s a DPDT. Check the actuator to see
if the switch is 2-position or 3-position.
Match the circuit diagram to your needs, or replace an existing
switch with one of the same configuration.
4. Waterproof/water-resistant
Cole Hersee uses the term water-resistant for marine switches.
‘Waterproof’ properly refers to switches that will be used
submerged underwater.
Determine how much exposure your switch will receive, and
select water-resistant for switches which might receive exposure
to salt spray or rain. The international IP rating demotes resistance
to ingress of dust or liquid. IP66 is high pressure wash resistant.
IP67 is immersible.
Many Cole Hersee toggle switches are ‘sealed’, containing
0-rings in the stem of the actuator, and have gaskets to exclude
moisture. Others are completely coated in plastic and usually
have wire terminals. Such switches are a good choice for use
in boats.
5. Terminals
Switches come with blade terminals, screw terminals or integral
wire terminals. Cole Hersee recommends screw terminals (or
wire terminals in a plastic-coated switch) for marine applications.
SPST
SPDT
DPST
6. Switches with pilot lights
DPDT
Many of our switches contain an integral pilot light which can
be very helpful, and the lenses are available in different colors.
Cole Hersee 58328 Series switches come with a variety of lenses
in different colors – you simply snap in the color you want.
There’s one more thing to know – illuminated switches come in
Dependent or Independent types. With a Dependent switch, the
pilot is On when the switch is On, and Off when the switch is Off.
The illumination of Independent switches or switch groups is
usually controlled by a master switch independent of the circuit
that the illuminated switch controls - it can be convenient to have
all switches illuminated so that they can be seen in the dark.
Rapid ship item. 22
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
windshield wiper switches C
Electronic Switches
Electrical Switches
C1
C2
75600-01 Two Motors, 12V DC
One switch synchronizes two motors. One Delphi (Packard) 4-way
male connector 6294544 (mates with 2977048) and one Delphi
(Packard) 6-way male connector 2977042 (mates with 2977044).
Lead and connector assembly: 5.625" (142.9mm) long.
C1 Electronic switches
Electronic Windshield
Wiper Switches
Microprocessor design ensures dependable control of wipers. With
dynamic parking feature and intermittent delay for use with one or
two permanent magnet electric wiper motors with negative ground.
4 positions: Off/Park – Intermittent range – Low- High. Push-to-wash
(one to three wipes after the knob is released). Black plastic knob with
reliable metal insert and set screw, white imprint imprinted with SAE
washer wiper symbol. Diecast case 2 7/32” (56.4mm) square 1 13/16”
(46.0mm) long. 7/16 -28 thread mounting stem, 0.45” (11.3mm) long.
Hexnut and lockwasher included. Switches conform to SAE J1455, SAE
J112a and J234.
OFF/
PARK
ON, Long Delay 15 sec
Intermittent
Delay
ON, Short Delay 2 sec
75602-02 Two Motors, 24V DC
Same as 75600-01, but 24V.
Synchronizes
two motors!
LOW SPEED
HIGH SPEED
75600-04 One Motor, 12V DC
Microprocessor design. Six color-coded wire leads, 5" (127.0mm)
long. With round knob imprinted with SAE washer-wiper symbol.
75602-04 One Motor, 24V DC
Microprocessor design. Same as 75600-04, except 24V.
Dynamic Parking
The wiper motors on your boat have either dynamic or
non-dynamic (coast-to-park) parking. If you are replacing a switch,
you need to know which type they are. Cole Hersee wiper switches
on this page have the added benefit of dynamic parking.
With dynamic parking the wiper blades are retarded electrically to
bring the wipers to a rapid stop in the correct position after you
turn the switch off.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
23
C
windshield wiper switches
C2 Electrical switches
Standards
Electrical Wiper Switches
Suitable for permanent magnet electric wiper motors. 3 positions:
Off/Park – Low – High. Black plastic knob with metal insert and set screw.
Mounting stem 7/16” – 28 thread. 12V DC.
75212-04 Without Dynamic Parking
Without push-to-wash. 4 blade terminals. Plated steel case 1 3/8”
(34.9mm) diameter, 3/8” long. Mounting stem 0.32” (9.6mm) long.
Cole Hersee makes switches and connectors that meet industry
standards, generally understood to be those of the SAE and the
automotive industry. Many of our switches meet other standards
as well, such as USCG or ABYC.
For over a century, Underwriters’ Laboratories (UL) has been a
third-party trusted source worldwide for product compliance.
Having the UL mark on our products means that UL has tested and
evaluated representative samples of that product and determined
that they meet the stringent UL requirements. Products are
continually checked by UL to make sure they continue to meet
those requirements – UL inspectors visit the Cole Hersee factory
every quarter to check on certified products. UL marks may be
only used on products certified by UL and under the terms of
a written agreement between UL and Cole Hersee.
Visit the UL website, www.ul.com where you can find us listed
under ‘Cole-Hersee’.
UL certified products are accepted in the US and Canada by OSHA,
insurance companies, labor unions, fire officials and electrical
inspectors.
75221-09 Without Dynamic Parking
With push-to-wash. 5 blade terminals. Internal circuit breaker.
Plated steel case 1 3/8” (34.9mm) diameter, 3/8” long. Mounting
stem 0.32” (9.6mm) long.
75226 Dual Motor, Without Dynamic Parking
With push-to-wash. 7 blade terminals. Plated steel case 1 3/8”
(34.9mm) diameter, 3/8” long. Mounting stem 0.32” (9.6mm) long.
The UL Listing Mark
LISTED
One375Mof the most common UL Marks, found on many Cole Hersee
products. It means UL found that samples of this product met
the UL safety requirements that are primarily based on UL's own
published Standards for Safety.
MARINE
75228-04 With Dynamic Parking
5 blade terminals. Use with motors with dynamic parking capability. Sealed construction, including shaft O-ring. Mounting stem is
0.45” (11.4mm) long. Diecast case 1 5/8” (41.3mm) diameter.
LISTED The UL Marine Mark
707B
These products have been tested specifically for marine use, and
have been evaluated to UL's published Marine Safety Standards
and other applicable standards and codes. These requirements
specifically relate to hazards that can occur as a result of exposure
to harsh marine environments - vibration, impact, ignition protection, water ingress and salt spray corrosion common on pleasure
craft and boats.
Many of our marine switches also conform to applicable ABYC
and USGC standards.
American Boat & Yacht Council: www.abycinc.org
United States Coast Guard: www.uscg.mil
75236 Dual Motor, With Dynamic Parking
With push-to-wash, 8 blade terminals. Sealed construction,
including shaft o-ring. Mounting stem is 0.45" (11.4mm) long.
Diecast case 1 5/8" (41.3mm) diameter.
We provide UL certification because our customers may be
mandated to install UL-marked products. There are costs associated with UL certification and ongoing testing and auditing, and
therefore UL-labeled switches may be slightly more expensive
than their unmarked counterparts.
MARINE
LISTED The CE Mark
The CE mark is a European mark analogous to UL. It similarly
denotes that a product has undergone assessment procedures
complies with European standards that apply to the product.
The designation "CE" is French for "Conformité Européen".
Rapid ship item. 24
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
relays & solenoids D
Relays & Microrelays
Modules
Solenoid Relays
D1
D2
D3
Heavy Duty Relays 40A at 12V DC
D1 Relays & Microrelays
Heavy Duty & High Power Relays
These relays are used in many boats.Typical applications include: lighting, starting, horn, heating and cooling. Ignition protected to SAE J1171,
Section 5. Standard ISO terminal footprint for Form A (SPST), Form C
changeover (SPDT) and Form 2A (SPST, 2 terminals). Relays are available
sealed and unsealed (unsealed are supplied with snap-in brackets.)
Specifications:
Pull-in voltage: 7.8V maximum at 12V DC, 15.6V at 24V DC.
Release voltage: 1.2V minimum at 12V DC, 2.4V at 24V DC.
Temperature range: -40°C to 85°C.
Operational life: Electrical to 100,000 cycles; Mechanical to
10 million cycles.
Contact Material: Silver alloy.
Dielectric strength: 500V rms between coil and contact.
Insulation resistance: 100MΩ minimum (500V DC).
Vibration resistance: 10-40Hz double amplitude 1.5mm.
Cole Hersee Relays are rated based on a steady state resistive
load. De-rate according to the type of load: Motor load: Inrush can
be 5 to 10 x steady state current. Solenoid load: Inrush can be 10
to 20 x steady state current. Incandescent lamp load: Inrush can
be 10 to 15 x steady state current.
No Need To Order Brackets!
Specifications:
Contact rating (Resistive load) at 20°C:
12V DC: Normally Open 40A, Normally Closed 30A.
24V DC: Normally Open 20A, Normally Closed 15A.
Contact arrangement:
Available as Form A (SPST),
Form C (SPDT) and Form 2A
(SPST, 2 terminals).
High Power Relays 70A at 12V DC
Specifications:
Contact rating (Resistive load) at 20°C:
12V DC: Normally Open 70A, Normally Closed 60A.
24V DC: Normally Open 35A, Normally Closed 30A.
Contact arrangement:
Available as Form A (SPST) and
Form C (SPDT).
Relays and mircrorelays are supplied with a snap-in bracket,
therefore dealers need less inventory.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
25
D
relays & solenoids
Microrelays 25A at 12V DC
Relay Part Number Structure
These microrelays are used in many boats. They have a reduced size,
but can accept a 25A load. Typical applications include: lamp control,
horns, power windows, fuel pumps, and fans. Standard terminal
footprint for Form A (SPST), Form C changeover (SPDT) Microrelays
are available sealed and unsealed.
S Sealed
N Nothing
(no sealing)
R
R Relay
00 Without bracket
M Microrelay
01 With snap-in bracket
A
40
01
12
R
R Resistor
15 15A at 24V DC
20 20A at 24V DC
25 25A at 12V DC
35 35A at 24V DC
40 40A at 12V DC
70 70A at 12V DC
D Diode
N Nothing
(no suppressor)
12 12V DC
Specifications:
C Form C (SPDT)
2 Form 2A
(SPST two terminals)
Microrelay Stock Items
Relay Stock Items
Form.
Bracket
Amp.
Volt. Suppressor
Seal
RA-400112-NN
BP A:SPST
01: Snap-in
40
12
N
N
RA-400112-RN
BP A:SPST
01: Snap-in
40
12
R
N
A:SPST
01: Snap-in
40
12
D
N
A:SPST
00: None
40
12
D
S
A:SPST
00: None
20
24
D
S
RA-400112-DN
RA-400012-DS
BP RA-200024-DS
RC-400112-NN
BP C:SPDT
01: Snap-in
40
12
N
N
RC-400112-DN
BP C:SPDT
01: Snap-in
40
12
D
N
RC-200124-RN
BP C:SPDT
01: Snap-in
20
24
R
N
RC-400012-DS
BP C:SPDT
00: None
40
12
D
S
2:SPST
01: Snap-in
20
24
R
N
R2-200124-RN
RA-700112-NN
BP A:SPST
01: Snap-in
70
12
N
N
RA-700112-DN
BP A:SPST
01: Snap-in
70
12
D
N
RC-700112-NN
BP C:SPDT
01: Snap-in
70
12
N
N
RC-700112-RN
BP C:SPDT
01: Snap-in
70
12
R
N
Rapid ship item. BP
26
Available in retail clamshell pack. 24 24V DC
A Form A (SPST)
Contact rating (Resistive load) at 20°C:
12V DC: Normally Open 25A, Normally Closed 20A.
24V DC: Normally Open 15A, Normally Closed 10A.
Contact arrangement: Available as Form A (SPST), and
Form C (SPDT).
Vibration resistance: 10-40Hz double amplitude 1.27mm.
Pull-in voltage: 7.8V maximum at 12V DC, 15.6V at 24V DC.
Release voltage: 1.2V minimum at 12V DC, 2.4V at 24V DC.
Temperature range: -40°C to 85°C.
Operational life: Electrical to 100,000 cycles. Mechanical to
10 million cycles.
Contact Material: Silver alloy.
Dielectric strength: 500V rms between coil and contact.
Insulation resistance: 100M minimum (500V DC).
Part Number
S
Part Number
Form.
Bracket
Amp.
MA-250012-RN
A:SPST
00:None
25
Volt. Suppressor
12
R
Seal
MA-250012-RS
A:SPST
00:None
25
12
R
S
MA-250012-NN A:SPST
00:None
25
12
N
N
N
MA-150024-RS A:SPST
00:None
15
24
R
S
MA-150024-DN A:SPST
00:None
15
24
D
N
MA-150024-NN A:SPST
00:None
15
24
N
N
MC-250012-NN C:SPDT
00:None
25
12
N
N
MC-150024-RS C:SPDT
00:None
15
12
R
S
MC-150024-NN C:SPDT
00:None
15
24
N
N
Forward & Reverse Module
See page 28.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
relays & solenoids
Relay Sockets
Form 2 (SPST) with suppression
Accepts Cole Hersee relays and standard ISO relays.
Modular – sockets dovetail together. Accepts standard quick-connect
terminals. Easy mount bracket. Constructed of rugged glass-filled
polyamide. Temperature range -40F to 85°C.
99025, High Power Socket
For use with Cole Hersee High Power Relays. Form A (SPST)
Use with Tyco (AMP) terminals 280756 or 280755.
30
85
86
30
87 87
85
86
(-)
RESISTOR OR DIODE
Relay Schematics
87
0.315 [8.00]
0.331 [8.40]
87
86
85
1.043 [26.5] Sq. Ref.
30
FORM 2 TERMINALS
Microrelay Schematics
FORM A TERMINALS
0.662 [16.81]
Form A (SPST)
87
0.662 [16.81]
0.551
0.315
0.331 [8.40]
0.705 [17.91]
87
86
30
85
86
87 87
(+)
0.662 [16.81]
99026, Heavy Duty Socket
For use with Cole Hersee Heavy Duty Relays. Form A (SPST) or
Form C (SPDT). Use with Tyco (AMP) terminals 42281 or Ark-Les
3000H112A series.
Form A (SPST)
D
85
0.906
87
30
87
86
86
FORM A TERMINALS
30
85
0.705 [17.91]
0.354
0.610
30
0.331 [8.40]
85
30
85
86
87
0.453
FORM A TERMINALS
MA-250012-NN
40A Type has .250" terminals. 70A Type has .375" terminals. 1.024
0305
30
86,87,87a
85
Cole Hersee Co.
Form A (SPST)
with suppression
www.colehersee.com
Form A (SPST)
with suppression
0.453
0.662 [16.81]
85
(-)
30
(+)
86
(+)
30
85
87
86
30
87
FORM A TERMINALS
RESISTOR OR DIODE
FORM A TERMINALS
0305
RESISTOR OR DIODE
85
30
85
0.331 [8.40]
85
86
2 PLCS
0.610
86
86MA-250012-NN
87
30
0.354
0.331 [8.40]0.248
87
0.705
[17.91]
TYP 0.906
(-)
0.315
87
0.188
3 PLCS
85
0.551
0.705 [17.91]
0.030
30
FORM A TERMINALS
0.662 [16.81]
0.453
1.024
FORM C TERMINALS
86,87,87a
Cole Hersee Co.
www.colehersee.com
Form C (SPDT)
0.453
DETAIL B
Form C (SPDT)
(-)
(+)
TYP
87
87
0.315 [8.00]
SEE NOTE 11
0.188
3 PLCS
RESISTOR OR DIODE
30
85
86
0.354
30
87 87a
87
86
87a
86
0.331 [8.40]
87a
86
8785
0.315 [8.00]
FORM C (SPDT)
0.248
2 PLCS
0.030
86
0.315
0.662 [16.81]
RELAY CIRCUITRY
85
0.551
DETAIL D
DETAIL C
FORM A (SPST)
30
0.662 [16.81]
30 3085 85
85 0.70586
87 87a
[17.91]
(-)
87a
8686 8787 87a
(+)
0.177 [17.91]
0.705
85
30
SEE NOTE 11
RESISTOR OR DIODE
85
30 0.331 [8.40]
87
0.453
FORM C TERMINALS
30
FORM C TERMINALS
Form C (SPDT)
with suppression
DETAIL B
Form C (SPDT)
with
suppression
RELAY
CIRCUITRY
0.551
0.315
DETAIL D
DETAIL C
0.662 [16.81]
FORM C TERMINALS
0.662 [16.81]
87
0.315 [8.00]
85
0.354
FORM C (SPDT)
FORM A (SPST)
87
87a
86
30
85
(-)
86
(+)
87
0.315 [8.00]
87
SEE NOTE 11
30
0.331 [8.40]
30
87a
RESISTOR OR DIODE
86
85
(-)
86
87 87a
85
0.705
86 [17.91]
87 87a
85
30
85
30 85
(-)
(-)
86 868787 87a
87a
(+) (+)
86
30
87
85
0.705 [17.91]
0.177
30
0.453
SEE NOTE 11
RESISTOR
DIODE
RESISTOR
ORORDIODE
0.331 [8.40]
FORM C TERMINALS
30
(+)
RESISTOR OR DIODE
FORM C TERMINALS
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
27
D
relays & solenoids
Electronic Solenoid 48785
D2 Modules
Forward & Reverse
Relay Module 24452
Reversing module carries a heavy load and is suitable for
intermittent or continuous operation at 12V DC. Ideal for hatches,
winches/windlasses, intake/exhaust fans and many other direction reversing applications. Fully sealed to accommodate harsh
environments. Dynamic braking stops the motor when the control
switch is turned to Off. Low profile module (less than 2” high)
saves space in cramped installations. Studs are securely secured
in epoxy. Protective cover 97297 is also available.
Fully solid-state, with no moving parts to wear out. The
Electronic Solenoid stands up to over one million On-Off cycles.
It is completely sealed, ignition protected, and withstands
vibration and adverse environments. Use the Electronic Solenoid in
both 12V or 24V applications... or any voltage between 9 and 31V.
• Solenoid can be used in both High Side and
Low Side switching applications.
• Needs only a very low control current.
• Suitable for high inrush demand circuits.
Specifications:
9 - 31V DC, 85A continuous or 175A intermittent.
24452 F & R Module
Module only.
Low On resistance of .005 .
Low control current of .02A (max) means lighter wires,
smaller harnesses.
97297 Protective Cover
On/Off control voltage must be identical to the system voltage.
Wide temperature operating range -40°C to + 85°C
without derating.
Protected from transient voltage spikes or surges.
BAT
+
BAT
+
Red
Red
Specifications:
Black
High performance silver tin oxide contacts assure long cycle life.
70A at 12V DC intermittent, max On time 5 mins, Off time 3 mins.
50A at 12V DC Continuous. For intermittent operation. Control
switch should be Mom On – Off – Mom On; for continuous
operation On – Off – On.
LOAD
+
–
LOAD
High side switching application
Black
+
–
Low side switching application
Load current inrush: 150A. Pull-in voltage 7.8V max.
Low coil current draw. Coil resistance 82 Ohms ± 10%.
Vibration resistance: 10-55Hz. Double amplitude 1.55mm.
Environmental: -40°C to 85°C. Rust and moisture-resistant
plastic housing.
Fully sealed to IP67 with high strength epoxy for total
moisture protection.
Ignition protected.
Smart Battery Isolators
Prevents loads on an auxiliary battery from draining the starting
battery. More versatile than conventional isolators, it works with
all types of alternator, and allows bi-directional charging from
alternator to shore power. See page 46.
Tin-plated brass studs and hardware for corrosion resistance.
Dielectric strength: 500V RMS between coil and contact.
Rapid ship item. 28
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
relays & solenoids
D
200A Electronic Latching
Relay 48520
Electronic Motor Reversing
Module 24560
For ultra-high power applications. Protects motors and other loads
from damage due to overcurrent and overheating. Reduces downtime caused by repeated replacement of conventional solenoids.
Ideal for severe environments, hard-to-access locations and
labor-intensive installations. Ignition protected to ISO 8846.
60A at 12V DC, 45A at 24V DC (continuous duty load).
Eliminates inductive arcing, the No.1 killer of electromechanical
relays in motor applications. Solid state switching makes it ideal for
applications with high cycles and multiple position adjustments.
Features and benefits:
High output current capability.
Protects expensive components from damage due to overcurrent.
Solid state design eliminates contact wear, and extends service
life to one million On-Off cycles.
Stands up to corrosion, vibration, temperature and humidity
extremes. Electronics sealed to IP67. EMI/RFI protected to SAE
J1113. 12V 200A continuous. Inrush: 500A for 5 seconds. Control
current 2mA max. 6:00L x 4.85W x 3.00”H (152.4 x 123.2 x
76.2mm). Height is measured to the top of the studs.
No More Dead Batteries!
When battery voltage (12/24V) falls below 11.0V/22.0V the status
LED begins to flash green. When the battery falls below 9.5V, the
unit cuts off power to prevent damage to the motor and changes
the LED to steady red.
Fully sealed: waterproof and dustproof to IP67 – ideal for harsh
environments. When motor reaches end of travel, unit shuts off.
Works without end-of travel switches (it has internal end-oftravel sensing). End of travel shut off means that one push of
a switch is all it takes to complete the movement of the motor.
Automatically applies dynamic braking to motor. Reliable for
in excess of one million cycles. Overcurrent and under-voltage
protected. Electronic controls protect expensive motors. Integral
Status LED and output to drive a remote status LED. When used
with remote LED indicator, boat operator can stay at the controls
and know that the operation is complete.
Specifications:
Operating temperature range: -40˚ to +150˚F (-40˚ to +65˚C),
50A at 65˚C.
Ingress Protection: IP67 per IEC 529.
Humidity: 0 to 90% RH.
Vibration: 10-500 Hz per SAE J1455.
Shock: per SAE J1455.
Inductive transient: +/- 600V per SAE J1455.
Terminal torque specs:
SureStartTM Low Voltage Disconnect switches automatically
disconnect ancillary loads before battery power is insufficient
to start the boat. They automatically reconnect when voltage
has been restored.
Prolongs battery life by preventing irreversible damage due to
excessive discharge. See section E1.
Motor Terminals 1/4 -20
25 in-lbs max (2.9 Nm)
Power Terminals 5/16 -24 25 in-lbs max
Operating voltage 12V: 9.5V min, 12V typical, 16V max.
Operating voltage 24V: 18V min, 24V typical, 32V max.
Quiescent current: 1mA typical, 2mA max.
Load current: 50A continuous, 75A inrush.
Overcurrent protection: 75A typical. System will disconnect load
and sound alarm after 5 seconds of excessive current.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
29
relays & solenoids
D
D3 solenoid relays
Continuous Duty
24080
24081-01 UL
24135 coated
24636 composite
24063
24063-08 coated UL
24107
24144 200A
24624-10 sealed composite
36V Insulated
24V insulated
24V grounded
Intermittent Duty
Solenoid relays can generally remotely switch a heavier current
than is used in regular relays or microrelays. By using a solenoid,
the amount of heavy wiring needed to power the load is reduced,
since the control circuit mounted on the panel typically utilizes a
smaller wire gauge.
24008
24104
Solenoids are commonly used to control starter and winch motors,
and they have many other uses on vehicles of all kinds.
24124
24059
24059-08 UL
24115
24117 coated
24117-01 coated UL
24143 200A
24420 Normally Closed
24512-10 composite
24612 composite
24612-10 composite
24812 225A composite
24812-01 225A composite
24082 curved
24106
24612-G10 composite
12V insulated
12V grounded
6V grounded
2430 phenolic
24021 RSC phenolic
24023 phenolic
24046
24047
24060
24076 coated
24077 coated
24612-03 composite
24612-13 composite
M-200
M-200-01 UL
24021 phenolic RSC
24022 phenolic
24037
24038 curved
24071 coated
24103 RSC
24712-GS7 sealed composite
M-202
24041
24039 curved
24097
6V insulated
How Solenoid Relays Work
Key
CONTROL CIRCUIT STUDS
CONTROL CIRCUT STUDS
2
HOUSING
COIL
PLUNGER
1
1
4
LOAD CIRCUT STUDS
LOAD CIRCUIT STUDS
4-stud solenoid diagram
A typical 4-stud solenoid
The diagram shows a magnetic coil surrounding a contact plunger.
Before energization, the plunger is not electrically connected
to the control circuit. When the control circuit is energized, the
electromagnetic force induced in the coil attracts the plunger,
which moves to close the load circuit. When the control circuit is
de-energized, the spring-loaded plunger returns to its normal state
and the load circuit is broken. In continuous duty applications,
energization of the coil causes heating, therefore the solenoid
housing will become warm even in normal operation.
Composite – Body is made of glass-filled nylon.
Phenolic – Body is made of phenolic resin.
UL – Item is UL and CE rated.
Coated – Item is coated in PVC plastic for added environmental protection.
RSC – Contains resistor shorting circuit.
Curved – Bracket is curved for mounting on curved surface.
Sealed – Item has an internal seal.
3
2
B
1
Reversing
Polarity Switches
3
3
2
4
1
4
B
B
L
L
For changing the direction of permanent magnet motors.
Sealed Rocker Switches (Page 12)
58027-18
Mom On - Off - Mom On
58311-18
Mom On - Off - Mom On
LOAD
B+
1
4
2
5
B
Energized solenoid
Solenoid in its normal state
Control circut and load circuit closed
Control circut and load circuit open
For more information on solenoid relays, visit the interactive
training section of the Cole Hersee website:
www.colehersee.com
3
Toggle Switches (Page 18)
55046-06
Mom On - Off - Mom On
Product Interchange
Locate the equivalent Cole Hersee parts – check Section J.
Rapid ship item. 30
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
relays & solenoids
Continuous Duty Solenoid Relays
D
24107
2
Plated steel case, or with an added coat of plastic for extra protection.
85A except where noted. Normally Open Contacts, SPST, One circuit:
Off - On Housings: Contacts: Copper 5/16" -24 thread, hexnuts and
lockwashers included. 200A solenoids have silver contacts. Coil, ignition and ground terminals: Steel 10-32 thread, hexnuts and lockwashers included. Bracket mounting holes 5/16" x 19/32" (7.9 x 15.1) on
2 13/64" centers (56.0mm).
1
3
BAT +
24144 200A
Electrical Rating: 200A carry only.
Not to break 200A at 24V DC. Silver contacts.
36V insulated
24080
2
2
3
3
1
1
4
4
24V grounded
24135
Same as 24080, but with plastic coating.
24124
2
24080-01 UL-Listed
Same as 24080, but UL and CE rated.
Continuous Rating: 65A at 36V DC.
Intermittent rating: 120A make, 65A break.
10 sec On, 30 min Off.
MARINE
LISTED
LISTED
375M
1
3
Ignition
Protected
24V insulated
12V insulated
24115
24063
2
3
1
4
24059
BP
2
24063-08
Same as 24063,
but with plastic coating and UL Listed.
3
MARINE
LISTED
375M
LISTED
1
4
Ignition
Protected
24117
Same as 24059, but with plastic coating.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
31
D
relays & solenoids
24059-08 UL Listed BP
Same as 24059, but UL and CE rated.
Continuous rating: 65A at 12V DC.
Intermittent rating: 75 0A make, 100A break.
10 sec On, 30 min Off.
MARINE
6V insulated
24097
LISTED
2
LISTED
375M
3
Ignition
Protected
24117-01
Same as 24059-08, with UL/CE listing but with plastic coating.
1
4
24143 200A
Electrical Rating: 200A. Silver contacts.
2
Intermittent Duty Solenoid Relays
3
1
4
24420 Normally On
Continuous Duty 35A.
Plated steel case (some with an added coat of plastic) or phenolic
plastic case. Normally Off, SPST, One circuit: Off - On 750A make,
100A break, 10sec On, 20min Off, except where noted. Contacts:
Copper. Terminals: Copper. Small ignition and ground terminals are
10-32 thread. Large contact terminals are 5/16" -24 thread. Hexnuts
and lockwashers are included. Bracket mounting holes 5/16 x 19/32,"
2 13/64" on centers (7.9 x 15.1, 56.0mm).
24V insulated
1
2
120A make, 65A break. 10 sec On, 30 min Off.
24008
3
2
3
1
4
4
12V grounded
24106
24104
BP
24082 Curved Bracket
New Master Disconnect
75920 Sealed Master Disconnect - See page 42.
Rapid ship item. 32
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
relays & solenoids
12V grounded
M-200-01 Marine, UL Listed
Same as M-200, but with UL & CE listing.
Intermittent rating: 750A make, 100A break.
10 sec On, 30 min Off.
24037
2
24060
D
MARINE
LISTED
LISTED
375M
Ignition
Protected
2
1
3
24071
Same as 24037, but with plastic coating.
1
M-202 Marine
Marine construction. Clear protective finish, brass hexnuts and
lockwashers.
3
BAT +
24046
2
1
3
BAT +
24077
Same as 24046, but with plastic coating.
24022 Phenolic Housing
Bracket mounting holes 9/32" x 25/64," 2 7/64" on centers
(7.1 x 9.9, 53.6mm).
24023 Phenolic Housing
Bracket mounting holes 5/16" x 9/32," 2 9/16" on centers
(8.1 x 7.2, 65.1mm).
2
1
12V insulated
3
4
2430 Phenolic Housing
24047
PVC coated model: 24076.
2
2
3
1
3
BAT +
1
4
M-200 Marine BP
Same as 24047, but marine construction. Clear protective
finish, brass hexnuts and lockwashers.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
33
D
relays & solenoids
6V grounded
24636 36V Insulated
L bracket, two 10-32 stud coil terminals.
24041
24624-10 24V Insulated
F bracket, two 10-32 stud coil terminals.
2
24512-10 12V Insulated BP
F bracket, two blade coil terminals.
1
3
24612 12V Insulated
L bracket, two 10-32 stud coil terminals.
24039 Curved Bracket
24612-10 12V Insulated
F bracket, two 10-32 stud coil terminals.
2
24612-G10 12V Grounded BP
F bracket, one 10-32 stud coil terminal.
1
3
Intermittent Duty, 200A
For starting small engines.12V DC. SPST normally open contacts. 200A
make and break, 5 secs On, 5 secs Off, 300A inrush. (Sealed solenoids
200A make and break, 5 secs On, 5 secs Off. 500A inrush, maximum On
time 20 secs.) Allow at least 40 secs cooling after maximum On time.
Copper contacts. Maximum operating voltage 14V DC. Cycle life: 10,000
minimum. Sealed solenoids are protected against ingress of contaminants
such as oil or gasoline, dirt and moisture. Bracket mounting holes 5/16" x
19/32" (7.9 x 15.1) on 2 13/64" centers (56.0mm).
Plastic Body Solenoid Relays
Rugged glass-filled nylon construction. Available in close-fitting
L bracket or F bracket that gives a standoff.
Continuous Duty, 100A
For starting small engines. SPST normally open contacts. 100A make
and break, 400A inrush. Silver contacts. Large studs: 5/16"-24. 12V
type: maximum operating voltage 14V DC. 24V type: maximum operating
voltage 27V DC. 36V type: maximum operating voltage 36V DC. Cycle
life: 50,000 minimum. Bracket mounting holes 5/16" x 19/32" (7.9 x
15.1) on 2 13/64" centers (56.0mm).
2
2
3
Insulated.
Shown: L
bracket, blade
terminals.
4
1
3
Insulated.
Shown: F
bracket, stud
terminals.
2
Grounded.
Shown: L
bracket, blade
terminal.
4
1
1
2
24612-03 12V Insulated, L Bracket BP
5/16" -24 large studs, two 10-32 stud coil terminals.
Grounded.
Shown: F
bracket, stud
terminal.
1
3
3
24612-13 12V Insulated, F Bracket
5/16" -24 large studs, two 10-32 stud coil terminals.
24712-GS7 12V Grounded, Sealed BP
1/4" -20 large studs, one 8-32 stud coil terminal.
Rapid ship item. 34
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
relays & solenoids
Special Purpose Solenoid Relays
Heavy Service, 225A, Continuous Duty
SPST normally open contacts. Insulated. 12-48V DC. Suitable for use
with winches, small thrusters, etc. 225 make and break, 600A inrush.
Resistor Shorting Circuit
In this application, 3 is Normally Open. It becomes common with 1 and
4 when the solenoid is energized. Commonly used in engine starting
applications. Intermittent duty.
24103 12V Grounded
2
Large studs: 5/16"-24, two 10-32 stud coil terminals. 12V silver contact,
50k cycles. Copper contact 25k cycles. Maximum operating voltage 14V
DC, cycle life 25,000 minimum. 36V type: maximum operating voltage
36V DC, cycle life 50,000 minimum. 48V type: maximum operating
voltage 48V DC. Cycle life: 50,000 minimum. Bracket mounting holes
5/16" x 19/32" (7.9 x 15.1) on 2 13/64" centers (56.0mm). Other types
available by special order.
2
3 RESISTOR
SHORTING
CIRCUIT
1
4
24021 Phenolic Housing, 12V Grounded
Bracket mounting holes 9/32 x 1/2," 2 13/64" on centers
(7.2 x 12.7, 56.0mm). Contact terminal 5/16" -24 thread.
3
1
D
4
24824-01 24V
Silver contacts.
Two Circuits
Normally Off and Normally On. Special application: for forward and
reverse systems. Housing: Steel. Continuous Duty, Normally Closed
contacts 35A, Normally Open contacts 85A. Two circuits, DPST.
24812 12V
Copper contacts.
24400 36V Insulated
24812-01 12V
Silver contacts.
2
Special Types of Solenoid Relays
3
1
36V Two Circuits Insulated
24400
24V Two Circuits Insulated
24402
12V Two Circuits Insulated
24401 & 24401-04 coated
12V Two Circuits Grounded
24401-01
12V Latching
24200
24V Motor Reversing Solenoid
24450-02
12V Motor Reversing Solenoid
24450
24V Heavy Service 225A
24824-01
12V Heavy Service 225A
24812 & 24812-01
12V Resistor Shorting Circuit
24103 & 24021
4
5
24402 24V Insulated
Same as 24400 only 24V.
6
24401 12V Insulated
Same as 24400 only 12V.
24401-04
Same as 24401, but with plastic coating.
24401-01 12V Grounded
2
1
3
4
Rapid ship item. BP
Available in retail clamshell pack. 5
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
35
relays & solenoids
D
Motor Reversing Solenoid 12V
Latching Solenoid Relay
Suitable for use with motors for deck hatches, trim tabs etc. DPDT
intermittent duty. 12V DC. Common ground coil. Two blade coil terminals,
5/16" -24 large studs. Copper contacts. 75A make and break, maximum
On time 5 mins. 125A make and break, maximum On time 30 secs. 150A
make and break, maximum On time 0.5 secs. Allow 5 mins Off after max
On time. Maximum operating voltage 14.5V DC. Cycle life 10,000 cycles at
5 secs On, 25 secs Off. Shipped with mounting hardware. Use to control
reversing motors such as those in winches and windlasses. Two solenoids
in one for cost and space savings. Two integral solenoids provide dynamic
breaking for permanent magnet motors when neither coil is energized.
12V Continuous Duty, 110A (carry only). Insulated. Plated steel
housing. Requires only a momentary application of coil power to
operate. Very little heat is generated, because the coil is de-energized
when the solenoid is On. This special solenoid toggles On and Off and
requires no current to maintain the continuity of the power circuit.
Actuation of the external momentary switch causes current to flow in
the solenoid coil, locking the contact in place, and maintaining the load
circuit in an On position. A second actuation of the momentary switch
releases the plunger, turning the load circuit Off.
Use in conjunction with one of many types of Cole Hersee SPDT
momentary switches: rocker (such as 58027-04), or ignition-type
keyed switch (such as 75705-01).
24200
Momentary
Switch
+
BAT
2
3
Also available as 24V: 24450-02 with same rating as 24450.
Contact Cole Hersee.
LOAD
24450
1
BP
4
Latching Solenoid
Relay Applications
+
T1
1. A Remote Battery Isolator
In a two-battery system, use the Latching Solenoid to isolate
the batteries from each other, and prevent battery drain from the
higher into the lower. It has an advantage over electronic Battery
Isolators (see page 47), in that it will not produce a voltage drop
during operation.
BAT
T2
+
Forward
BAT
Reverse
MOTOR
200A Latching Relay
2. A Remote Battery Disconnect
Use it as a remote Battery Disconnect Switch. This eliminates
the need for heavy gauge wiring between the control panel and
the battery.
Solid-state relay switches heavy motors and protects them from
damage due to overcurrent and overheating. Reduces downtime
due to replacement of conventional solenoids. Ignition protected.
See page 29.
Rapid ship item. 36
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
battery management products E
Low Voltage Disconnect Switches
Battery Selector & Master Disconnect Switches
Master Disconnect Selector Switches
Battery Isolators
E1 Low Voltage Disconnect Switches
SuperStartTM Compact
Low Voltage Disconnect
E1
E2
E3
E4
When battery voltage falls below programmed voltage setting
for 2 minutes non-critical loads are automatically disconnected.
Waterproof and dustproof to IP67 international standard.
(Submersible to 3 feet.) Sealed connector makes it ideal for
harsh environments. Advanced technology enables a robust
product in a small lightweight package. Programmable timer
feature automatically disconnects loads after key off, regardless
of battery condition. 12804 Harness fits this LVD.
Specifications
4.5"W x 4.3"L x 3.1"H (114.3 x 108.6 x 79.0mm).
Operating Temperature Range: -40° to +85°C ( -40° to +185°F).
100A at 85°C, 125A at 60°C.
Ingress Protection: IP66 per IEC 529.
48513
Compact LVD
Humidity: 0 to 90 %RH.
48513-01
LVD & Harness
Vibration: 10-500 Hz per SAE J1455.
12804
Harness
Shock and Thermal Shock: per SAE J1455.
Inductive Transient: +/- 600V per SAE J1455.
12 or 24V,
125A at 60ºC, 100A at 85ºC
Load Dump: + 100V per SAE J1455.
Battery Terminal Torque: 50 in-lbs max.
Electronically senses battery voltage and conserves starting
power. Automatically disconnects and reconnects loads based
on battery condition; no operator action is required to protect the
batteries. Prolongs battery life by preventing damage due
to excessive discharge.
Eliminates the need for both separate timer or voltage sensing
delay relay devices and high current relay or solenoid, and
simplifies wiring and installation. Small size and lightweight design
means easier and more discrete mounting, to use space more
efficiently, eliminate hardware, and give better routing of wires.
Solid state switch is inherently better for use with electronic
devices. It creates less noise and interference and protects
electronics from switching spikes.
Rapid ship item. BP
Available in retail clamshell pack. Operating Voltage: 9V min, 12V typical, 16V max if used with 12V
DC systems.
Disconnect Voltage: 12.05V min, 12.1V typical, 12.15V max
When voltage drops below 12.1V, system activates the alarm
for one minute and then disconnects loads.
Quiescent Current: 1mA typical, 2mA max. Circuit operating current.
Load Current: 100A at 85°C, 125A at 60°C.
Overcurrent Protection: 150A. System will disconnect load and
sound alarm after 5 seconds of excessive current.
Key-Off Ttimer: 5 minutes minimum, 15 minutes typical. Option
feature. After key off, unit will wait a set time before activating
alarm. One minute later loads are shut off.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
37
E
battery management products
SureStartTM Automatic Low
Voltage Disconnect Switch
Ensures ample starting capacity and prolongs battery life.
Automatically disconnects non-critical loads from a battery
when the battery voltage falls below a predefined threshold.
Automatically reconnects the loads to the battery when it
is being charged. Manual override permits a user to make
or break the connection, regardless of battery voltage.
Overcurrent, short-circuit and over-temperature protection.
48510 200A at 12V DC
48511 100A at 12V DC
48511-01 Kit
48512 150A at 12V DC
–
+ Battery
Momentary
Switch
12V 50mA
LED and/or Buzzer
VIOLET
WHITE
Ignition Switch
ORANGE
BLACK
Low Voltage
Disconnect Switch
Load
LVD Accessories
58036-06 Rocker Switch
Mom On-Off-On SPST switch for use with LVDs. Uniform with
series 58031 & 58332 switches in Section B1. Use with 48513.
12804 Harness
Harness kit (Deutsch connector & wires) fits 48513 LVD.
No more stranded boats! The SureStartTM LVD ensures there’s
enough starting power to get home, and saves the batteries on
boats that are not used every day.
48511-01 Kit contains
48511 LVD and 40205 SigmaTM Alarm Switch.
Specifications
6.0"L x 5.1"W x 3.0"H (152.4 x 130.2 x 76.2mm).
Environmental: -40˚C to 85˚C. SAE J1455 & J1113.
Electrical: 150A or 200A continuous. Inrush: 500A
(for 5 seconds). 2mA max quiescent current.
Ignition-proof to ISO 8846.
Disconnects when battery drops below 12.1V for 2 minutes,
reconnects when battery meets or exceeds 13.0V for 10
seconds. (Factory programmable).
Alarm: Active low, 50mA.
Activates 1 minute before disconnect. (Factory programmable)
Accuracy: ±100mV.
Electronics sealed to IP67.
Rapid ship item. 38
BP
Available in retail clamshell pack. 40205 SigmaTM Rocker & Alarm
Digital switch with piezo alarm. Use with 48510, 48511 and 48512.
ABYC & USCG Rules
Boats are built and repaired to ABYC & USCG standards.
11.7.1.2.1. A battery switch shall be installed in the positive
conductor(s) from each battery or battery bank with a CCA rating
greater than 800 amperes. Exceptions: 1. Trolling motor conductors.
11.7.1.2.2. A battery switch shall be mounted in a readily accessible
location as close as practicable to the battery.
11.7.1.2.3. Battery Switch Ratings.
The intermittent rating of a battery switch shall not be less than the
maximum cranking current of the largest engine cranking motor that
it serves. The minimum continuous rating of a battery switch shall
be the total ampacities of the main overcurrent protection devices
connected to the battery switch, or the ampacity of the feeder cable
to the switch, whichever is less.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
battery management products
E2
Battery Selector & Master Disconnect Switches
Designed for two battery installations where typically one is used for
starting, and the other is used for accessory loads. The switch allows
batteries (or banks of batteries) to be used separately or combined.
E
A selector switch allows use of the first battery, the second battery, or
both batteries simultaneously. This provides back-up starting power in
an emergency. Either or both batteries can be selected for energizing.
These switches combine the functions of Battery Selector and
Master Disconnect Switches to give four battery power options:
MARINE
M-750 Basic Switch
M-751 With Lock
Same as M-750, but with lock and two keys.
LISTED
375M
LISTED
Ignition
Protected
M-752 With Lock
Same as M-750, but with Alternator Field Disconnect.
• Power cut off at the source.
• Power On, Battery 1.
• Power On, Battery 2.
• Power On, both Batteries.
Battery selector switches provide a positive battery disconnect,
which has many advantages:
• It gives a reliable shutdown of power during maintenance.
• The version with the key protects against theft of the boat,
when unattended.
M-754
Same as M-750, but with circuit for pilot light (not supplied).
Heavy-Duty Construction
Vaporproof, weather-, dust- and corrosion-resistant. Durable, fractureresistant high temperature plastic case, knob and insulator. Switches
conform to USCG section 183.410 for ignition protection. Resistant to
impact, and temperature extremes.
Heavy duty copper stud terminals, with brass hexnuts. Can be surface
mounted, or installed through a 3 5/16" diameter hole in the panel.
Dimensions: Flange: 6" (152.4mm) diameter, overall height 2 5/8"
(66.7mm). Terminals: 3 copper studs, 3/8" (9.5mm) diameter.
• It helps protect against electrical fires, when the boat is not in use, and minimizes battery drain.
Electrical Ratings
Labeled UL 707B. Rating: 500A intermittent, 310A continuous, 6-36V DC.
Electrical ratings on UL labels are conservative. Use with either alternators or generators. Make before break design permits operation through
the three On positions with the engines running. Engines should always
be shut down before turning to Off. Wiring instructions are included.
Largest amp capacity for the dollar of any competitive switch
500A intermittent, 310A continuous, 6-36V DC
Large knob for easy grip...
even when wearing gloves.
Max Starting Power
Delivers maximum starting
power: allows either or
both batteries to be used.
Can be switched between
batteries even when the
engine is running.
3/8" - 24 copper
studs are solidly
machined to the
contact plates and
cannot come apart.
Flange for easy
flush mounting.
Can also mount
through a panel.
Heavy spring ensures
rock-solid electrical contact
and provides strong detent
action to the switch.
Impact-Resistant
Water-Resistant
500 Amp Capacity
Rugged polyester
thermo-plastic case
and knob. Stands up
to impact, maintains
its water-resistant
integrity.
High-performance synthetic
rubber o-ring keeps out
water, contaminants and
vapors. Many battery
switches have no o-ring!
Solid copper contact plates.
Easily handles amperages
as high as 500A intermittent.
Largest amp capacity for the
dollar of any battery switch.
Rapid ship item. BP
Available in retail clamshell pack. All-weather hardware:
heavy copper studs
and brass nuts for
maximum current
capacity.
Corrosion-Proof
Stainless steel
screws securely hold
the plate against the
o-ring, and keep the
switch watertight.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
39
battery management products
E
Wiring Diagrams
M-752
Key to diagrams: L = starter & load, SW = Battery Selector &
Master Disconnect Switch, BAT = battery, ISO = Battery Isolator,
COM = common, ALT = alternator, REG = Regulator, PL = Pilot
Light, IGN = Ignition, ACC = Accessory.
One engine and two batteries
F
BAT 1
B
A
+
REG
SW
BAT 2
M-750
One engine and two batteries
+
1
2
F1 F2
COM
L
CUT
SW
ALT
2
BAT 2 +
1
+ BAT 1
L
Two engines and two batteries,
with battery isolator
ALT
F
COM
BAT 1
Two engines and two batteries
BAT 2
SW
2
BAT 2 +
+
2
F1 F2
CUT
ALT
L1
L2
1
2
1
COM
+ BAT 1
A
REG
ISO
1
B
+
L1
L2
COM
ALT
M-754
One engine and two batteries
One engine, two batteries,
with battery isolator
IGN or ACC
BAT 1
SW
+
BAT 2
+ BAT 1
ALT
1
2
BAT 2
+
+
ISO
PL 2
PL 1
L
L
COM
ALT
ALT
Two engines and two batteries
Two engines, two batteries, two switches
IGN or ACC
BAT 1
BAT 2
BAT 2
+
SW
2
1
L2
2
ALT 2
40
BP
Available in retail clamshell pack. PL 2
ALT 1
COM
+
BAT 1
1
L1
COM
Rapid ship item. +
SW
+
PL 1
L2
L1
ALT
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
battery management products
E
Two engines, two batteries, two switches
1. IGN or ACC
BAT 1
BAT 2
2. IGN or ACC
+
+
PL 2
PL 1
PL 2
PL 1
ALT 2
L2
ALT 1
L1
Battery Types
Starting Batteries (SLI)
SLI - Starting, Lighting, Ignition. These batteries are designed to deliver very
high amperage for a short time. They are usually constructed of many thin
plates to get the amps out quickly and recharge quickly. While this is a strong
point for starting, they are not designed to withstand deep discharge cycles
that come with powering engine offloads. Starting batteries survive the longest
when they are kept in the 95%+ state of charge. They are very useful when
setting up a dual battery bank setup with one bank dedicated to starting, but
are not the best choice when using a single battery (or single bank) for starting
and powering loads.
SLI batteries are rated in two ways:
CCA - Cold Cranking Amps: The maximum amperage they can deliver at 0ºF
for 30 seconds.
MCA or CA - Marine Cranking Amps or Cranking Amps: The same as CCA
except at 32ºF (freezing point).
Deep Cycle Batteries
These batteries are designed to take lower amperage draw over a several
hours, even days. They are constructed with fewer thick plates that are
designed to give off power, rather than supplying lots of amps quickly. They
recover well from deep discharge down to 20% state of charge, but last the
longest if allowed to discharge no lower than 50% state of charge.
One engine and two batteries,
with battery isolator
IGN or ACC
BAT 1
BAT 2
Deep Cycle batteries are rated in two ways:
Amp hours: The total cumulative amps a battery can deliver over a 20 hour
period. So if the rating is 100, it can deliver 5 amps for 20 hours before it gets
to 10.5V.
+
+
ALT
2
PL 2
1
ISO
PL 1
L
ALT
Alternator Field Disconnect
Reserve Capacity (RC at 25A): The number of minutes that a fully charged
battery can deliver 25A before it reaches 10.5A. RC is the best number to look
at, as it is a more realistic measure, and it can be used to compare batteries.
Dual Purpose Batteries
These batteries are a hybrid between SLI and deep cycle batteries. They have
plates that are thicker than in SLI batteries, but thinner than deep cycle. They
don’t start as well as a SLI battery and they don’t supply as much power as a
deep cycle, but if you only have one battery or battery bank, they are a good
compromise. These batteries are frequently listed by both CCA and RC for
comparison purposes.
Battery Construction
While Lithium Ion (LI) and Nickel Metal Hydride (NiMH) are commonly used in
electronic devices such as laptops and cellphones, and are starting to show up
in hybrid vehicles, you still can’t beat lead acid for price/performance combination, and they are the most commonly used type in vehicle applications.
Lead-acid batteries are usually one of three types: Flooded, Absorbed Glass Mat
(AGM) or Gel.
Flooded batteries are the classic batteries, and they can be purchased as
types that are sealed and maintenance-free, or ones that allow you to add
water. They are usually the least expensive battery type in a group size. The
unsealed units are not spillproof and if tipped over are likely to leak acid. Even
the sealed units are more likely to leak than the other types of batteries
AFD is a useful built-in feature that will protect the alternator if the
boat operator accidentally turns the switch to Off with the engines
running. Battery Selector Switch M-752 has the integral AFD, which
is a second switch inside the body of the main switch that is electrically isolated from the power switching circuit. In switch operation
the AFD switch closes before the battery switch contacts close, and
it opens before they open. It’s connected in the field wire between
the voltage regulator and the alternator, and it prevents the alternator from producing power when the AFD switch is open. It protects
the diodes inside the alternator, which could be destroyed by the
electrical surge if the battery switch is suddenly turned Off when the
alternator is still running.
Rapid ship item. BP
Available in retail clamshell pack. AGM (Absorbed Glass Mat) batteries have glass material between the plates
that holds the electrolyte. AGM batteries (as well as Gel batteries) will not leak
acid if broken. AGM batteries are no-maintenance, and are sealed against
fumes, hydrogen, leakage, or non-spilling even if they are broken. They can
survive most freezes. AGM batteries are "recombinant"; which means the
oxygen and hydrogen recombine in the battery and prevent the loss of water
through electrolysis. The recombining is highly efficient, so almost no water is
lost. AGM batteries self-discharge slowly (from 1% to 3% per month), so they
can sit in storage for much longer periods without charging. The plates in AGM's
are closely packed and firmly mounted, and will withstand shock and vibration
better than standard batteries.
Gel Batteries are an adaptation of the flooded lead acid battery. A gelling agent
is added to the electrolyte to decrease motion inside the battery case. Many
gel batteries are VRLA (Valve Regulated Lead Acid) batteries and use one-way
valves in place of open vents. This helps the gases to recombine into water
in the battery. "Gel Cell" batteries are non-spillable even if they are broken.
Gel cells must be charged at a lower voltage than flooded or AGM, to prevent
excess gas from damaging the cells. Rapid charging of a Gel Battery with a
conventional charger may cause irreparable damage!
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
41
E
battery management products
E3 Master Disconnect Selector Switches
Performance of the 75920
Single Pole
75920 Master Disconnect Switch
Cole Hersee 75920
3000A
2500A
2000A
Current
Pollak 51-327
Protects boats against tampering, theft and battery drain.
Protects from hazards during boat servicing,and can be lockedout or tagged-out. Provides an effective emergency power cutoff.
1500A
Albright ED250
BEP 701
1000A
500A
1
2.5
5
10
15
20
30
40
50
60
70
80
90
100
120
240
300 nuous
0
Guest 2122
i
t
Con
High amperage capacity: 300A at 12V DC. Can be used in
both positive or in negative path applications. Waterproof and
dustproof to IP67 (immersible). Switch can be located in the
best location, regardless of environment. Composite engineered
polymer housing will not rust or corrode. Tested per SAE 1455
for salt corrosion. Large red knob is easy to operate with gloved
hands; 90º switch travel makes it easy to identify the switch
position. Built-in lockout satisfies OSHA requirements for an
energy isolation device. Attractive styling suitable for visible
mounting close to boat operator. Large divider on base prevents
accidental shorting of high energy cables. Fits standard Master
Disconnect mounting pattern. Knob is secured in place with
a set screw.
Blue Seas
9001e
Duration of Power
(seconds)
Performance graph (Duration vs. current) of the Cole Hersee 75920
and some competitive marine switches.
Horizontal axis: Time. From continuous (maintained) current (on the
left) down to one second (on the right). Vertical axis; Current withstood
by a given switch for the duration noted along the horizontal axis.
Specifications
Operating temperature range: -40 to 85°C.
Ingress protection rating: IP67.
Corrosion test: 96 hours salt spray test to ASTM standard.
Vibration test: 10-500Hz to SAE J1455.
Shock test: To SAE J1455.
Torque, Battery terminals: 5/16” – 24, 70-90 in-lbs
(8-10Nm).
Torque, Mounting hardware: 3/4” - 16, 18 ft-lbs max
(24.4Nm).
Operating voltage: 6V min, 36V max.
Continuous current: 300A max at 12V, 250A max at 24V,
200A max at 36V.
Intermittent current: 1000A at 12V, 90 sec on, 5 min off;
1500A at 12V, 60 sec on, 5 min off; 2000A at 12V, 30 sec
on, 5 min off; 3000A at 12V, 15 sec on, 5 min off.
Rapid ship item. 42
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
battery management products
With Diecast Lever
Two positions: Off-On. For 6-36V DC systems. Will disconnect the
battery circuit only. Electrical Ratings (unless noted): 1000A intermittent,
175A continuous. UL Listed 707B: 800A intermittent, 175A continuous.
UL Listed 375M: 250A at 6V, 125A at 12V intermittent; 40A at 6V, 20A
at 12V continuous. Electrical ratings on UL labels are conservative.
2484-16
Mounting stem: Brass, 3/4" -16 thread,
23/32" (18.3mm) long. Fits panels up to
3/16" (4.8mm) thick. Terminals:
Two 3/8" -24 studs. Case: Plated steel.
Contacts: Silver. Labeled UL 707B.
MARINE
LISTED
375M
LISTED
2484-A
Same as 2484-16, but without UL label.
2484-09
Same as 2484-16, but with copper contacts, and without UL label.
2484-06
Same as 2484-16, but without UL label, and with
weather-resistant with O-ring seal in operating
shaft, gasket-sealed terminal insulation and sealant
in mounting stem and case.
2484
Same dimensions as 2484-16, but with
copper contacts and ratings: Labeled UL 375M.
M-284-01 Long Stem, Brass Case BP
Mounting stem: Brass 3/4" -16 thread
(19.1mm), 1 13/32" (46.1mm) long. Fits
panels up to 15/16" (23.8mm) thick.
Terminals: Two 3/8" (9.5mm) diameter studs.
Actuator: Chrome-plated lever. Silver-laminated
contacts. Labeled UL 707B.
E
M-284-A
Same as M-284-01, but without UL label.
M-284-02 Weather-Resistant
Same as M-284-01, but with O-ring seal in operating shaft,
gasket-sealed terminal insulator and diecast lever with protective dichromate finish, and without UL label. Also available with
faceplate (M-284-09BP)
M-288 50 Amps
Rated at 50A at 14V DC. Mounting stem: 5/8" (15.9mm) diameter,
3/4" (19.1mm) long. Fits panels up to 17/32" (13.5mm) thick.
Terminals: Two 10-32 brass screw terminals. Actuator: Diecast
lever. Contacts: Silver. Case: Plated steel.
75908 2000A Intermittent, Weather-Resistant
Disconnects battery circuit only. Electrical rating: 2000A
intermittent. 30 seconds On, 3 minutes Off, 300A continuous.
Mounting stem: 3/4"-16 thread. Fits panels up to 1/4" (6.4mm)
thick. Terminals: Two 1/2"-20 copper studs. Case: Plated steel.
Sealing: sealed between shaft and mounting stem; case and
terminal insulator. Also available as double pole (75907)
MARINE
LISTED
375M
LISTED
MARINE
LISTED
375M
Battery Switch Ratings
LISTED
Continuous: This is the rating that is meant to indicate what the
device can handle forever with no interruption. It is usually measured
as the amperage that a device can handle for one hour without
exceeding the maximum allowed temperature rise at the terminals.
Continuous rated switches may be used as intermittent switches.
Intermittent: This is the amount of current the switch can handle for
5 minutes with the same temperature rise as above. Intermittent rating of a switch is always higher than continuous rating. Intermittent
rated switches may not be used as continuous rated switches.
M-284 BP
Same as M-284-01, but with copper contacts, and without UL
label.
Rapid ship item. BP
Available in retail clamshell pack. Inrush: This the short duration rating of the switch. This rating is
meant to reflect the ability of the switch to withstand a short term,
high current event like starting. A large diesel engine starting in cold
weather can draw close to 2000A for about 30 seconds. A switch
can have multiple inrush ratings to help match your application.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
43
battery management products
E
Double Pole
M-290-05 UL-Listed
Brass case. Silver laminated contacts.
LISTED
Chrome-plated diecast lever. Brass mounting
375M
stem 3/4" -16 thread 1 13/32" (46.1mm) long.
Fits panels through 15/16" (23.8mm) thick.
Two 3/8" -24 and two 10-32 studs. Labeled UL 707B.
Two positions: Off-On. For 6-36V DC systems. Will disconnect the
battery and the alternator or generator field circuit. Electrical ratings:
Large studs: 1000A intermittent.
15 seconds On, 5 minutes Off. 125A continuous (unless noted).
Small studs: 20A continuous.
MARINE
LISTED
With Diecast Lever
75903 Steel Case
Chrome-plated diecast lever. Plated steel case. Brass contacts.
Brass mounting stem 3/4" -16 thread 23/32" (18.3mm) long.
Fits panels through 3/16" (4.8mm) thick. Two 3/8" -24 and two
10-32 studs.
75904-01 Weather-Resistant,
With Indexing Pin and O-ring
Diecast lever. Plated steel case. Silver-laminated contacts.
Brass mounting stem 3/4" -16 thread 17/32" (13.5mm) long.
Fits panels through 1/4" (6.4mm) thick. Two 3/8" -24 and
two 10-32 studs. O-ring seal in the operating shaft, and gasketsealed terminal insulator.
75904 Steel Case, Silver Contacts
Same as 75903, but with laminated silver contacts.
M-289 Brass Case
Chrome-plated diecast lever. Brass contacts. Brass mounting stem
3/4" -16 thread 1 13/32" (46.1mm) long. Fits panels through
15/16" (23.8mm) thick. Two 3/8" -24 and two 10-32 studs.
75907 2000A Intermittent, Weather-Resistant
Electrical ratings: Large studs: 2000A intermittent, 30 seconds
On, 3 minutes Off. 300A continuous. Small studs: 20A continuous. Plated steel case. Chrome-plated diecast lever. Mounting
stem 3/4" -16 thread, fits panels through 1/4" (6.4mm) thick. Two
1/2" -20 copper and two 10-32 studs. Sealed between shaft and
mounting stem, and case and terminal insulator. With indexing pin.
Also available as single pole (75908).
M-290 Brass Case, Silver Contacts
Same as M-289, but with laminated silver contacts.
M-290-01
Same as M-290, but with O-ring seal in operating shaft.
Emergency Cutoff
Master disconnect switches are commonly mounted in a prominent
location for use in case of emergency, so that the entire electrical
system of the boat can be shut down with one switch.
Rapid ship item. 44
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
battery management products
For Two High Current Loads
75912
Also useful for applications where both positive and negative
circuits need to be switched. Electrical ratings: 125A continuous,
750A intermittent; 15secs On, 5min Off. Up to 36V DC max, carry
only. Silver contact surfaces. Both poles are separately insulated.
Four 3/8" -24 studs. Lockwasher and two brass hexnuts per stud
are provided. 3/4" -16 brass mounting stem. Operating temperature range: -40° to 85°F (-40° to 29°C) O-ring seal in mounting
stem; gasket seal at terminal insulator. Epoxy seal at case,
mounting stem and locating pin. Heavy duty plated steel case.
With indexing pin. Mounting torque 20ft lbs (27 Nm); stud torque
4.4 to 7.4 ft lbs (6-10Nm).
E
Accessories
Battery Jumper Terminals and Stud
Use them to make easily-accessible battery connections, inside or
outside the vehicle. Can be used individually or in pairs. Easy to install.
Solid brass posts. Includes brass hexnut and lockwasher. Jumper
terminals have contact post 13/16" (20.6mm) diameter, 1 1/8" (28.8mm)
long, which is grooved to accept standard jumper cables. 6 -48V DC.
46210-02 Post With Red Cap For Positive Terminals
Disconnects positive
& negative at the
same time!
97846-A Replacement Captive Red Cap
46210-03 Post With Black Cap For Negative Terminals
BAT
+
A
B A
B
STARTER
SOLENOID
STARTER
MOTOR
97846-B Replacement Captive Black Cap
Wiring Diagrams
46211-R Red Battery Feeder Stud
Brings 6-36V DC power through bulkheads or firewalls.
Impact-resistant plastic insulator/mounting bushing, 1 17/64"
(32.1mm) diameter, 5/8" (15.9mm) long. Two 3/8" -16 thread
brass stud terminals, 5/8" (15.9mm) long.
SPST Switches
BAT
+
SWITCH
STARTER
SOLENOID
STARTER
MOTOR
DPST Switches
REGULATOR
B
F
A
46211-01 Black Battery Feeder Stud
Same as 46211-R, only black plastic.
SWITCH
BAT
+
STARTER
SOLENOID
A or B
STARTER
MOTOR
F
GENERATOR
OR ALTERNATOR
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
45
battery management products
E
24505 Lockout Lever Kit
Special lever and flange plate accept a padlock to securely lock a
Disconnect Switch in the Off position, which is required by many
lock-out/tag-out safety regulations. For use with Cole Hersee
lever actuated master disconnect switches with a 3/4" diameter
(19.1mm) mounting stem: 2484, 2484-A, 2484-06, 2484-09,
2484-16, 75903, 75904, 75904-01, M-284, M-284-A, M-28401, M-284-02, M-289, M-290, M-290-01, M-290-05, 75907
& 75908. (We recommend the use of a padlock with a 5/16"
(7.9mm) diameter shackle.)
E4 battery isolators
Smart Battery Isolators
48525 85A at 12V DC
48530 200A at 12V DC
Prevents loads on auxiliary battery from draining the starting
battery, a Smart Isolator is more flexible than traditional
Battery Isolators:
Face Plates
82065 Without Indexing Hole
For Master Disconnect Switches. Polished aluminum with
enamel finish. Fits Cole Hersee Master Disconnect Switches
without indexing pin. 2 1/2" (63.5mm) diameter.
82065-02 With Indexing Hole
Same as 82065, but with hole for indexing pin.
It works with all types of alternator.
Smaller and lighter than traditional isolators.
There are no efficiency losses due to diodes.
It allows bi-directional charging from the alternator
or from shore power.
It reduces the load on the charging system by not
connecting the auxiliary battery until the primary battery is charged to 13.2V. This extends the life of
expensive charging components.
Simple to install – connect to starting battery, auxiliary battery
and ground. Optional start assist: momentary switch allows the
auxiliary battery to assist the starting battery.
LED status indicator.
Specifications
Operating temperature range: -40 to 85ºC.
Ingress protection: IP66 per IEC, (high pressure wash resistant).
Humidity: to 90% RH.
Vibration: 10-500Hz per SAE J1455.
Shock & thermal shock: per SAE J1455.
EMI/RF: Per SAE J1455 & J1113.
Inactive Boats
Battery terminals torque: 50 in-lbs (5.78Nm).
Normal input voltage: 9V min, 16V max.
If you leave a fully charged battery in an inactive boat, it could be
dead in as little as two months. Onboard electronics continue to
draw small quiescent currents to retain their memory, even when
the boat is off.
Two solutions are to install a Master Disconnect Switch (Section E3)
or a Low Voltage Disconnect (Section E1).
Rapid ship item. 46
BP
Available in retail clamshell pack. Continuous current: 48525 85A; 49530 200A.
Connect voltage: 13.2V typical after two minutes at this level.
Disconnect voltage: 12.7V after one minute at this level.
Quiescent current: 5mA typical, 8mA max. Relay off, start signal
input open or grounded.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
battery management products
General Purpose Battery Isolators
4-Stud Type
For use with Delcotron-type alternators. Four studs. Schematic
diagrams on page 48.
E
48070 70 Amp
Terminations: three 1/4" (6.4mm) studs. Two 9/32" (7.2mm)
diameter mounting holes. Size: 5"L x 3 1/4"W x 2 3/16"H
(127.0 x 82.6 x 71.0mm).
48092 90 Amp
Terminations: three 1/4" (6.4mm) studs and one No. 10 stud. Two
9/32" (7.2mm) diameter mounting holes. Size: 6 1/2"L x 3 1/4"W
x 2 13/16"H (165.0 x 82.6 x 71.0mm).
48090 90 Amp
Terminations: three 1/4" (6.4mm) studs. Two 9/32" (7.2mm)
diameter mounting holes. Size: 6 1/4"L x 3 1/4"W x 2 3/16"H
(165.0 x 82.6 x 71.0mm).
48122 140 Amp
Terminations: three 5/16" (7.9mm) studs and one No.10 stud.
Four 9/32" (7.2mm) diameter mounting holes. Size: 6"L x 4
13/16"W x 3 11/32"H (152.4 x122.2 x 84.9mm).
48162 200 Amp
Terminations: three 5/16" (7.9mm) studs and one No.10 stud.
Four 9/32" (7.2mm) diameter mounting holes. Size: 8 1/2"L x 4
3/16"W x 3 13/32"H (215.0 x 122.2 x 86.5mm).
48120 140 Amp
Terminations: three 5/16" (7.9mm) studs. Four 9/32" (7.2mm)
diameter mounting holes. Size: 6 1/4"L x 4 3/16"W x 3 11/32"H
(152.4 x 122.2 x 84.9mm).
48160 200 Amp
Terminations: three 5/16" (7.9mm) studs. Four 9/32" (7.2mm)
diameter mounting holes. Size: 8 1/2"L x 4 3/16"W x 3 13/32"H
(215.0 x 122.2 x 86.5mm).
3-Stud Battery Isolators
For use with alternators that do not have an integral electronic
voltage regulator.
48080 42 Amp
Terminations: one 10AWG 6" (152.4mm) wire lead, two 12AWG
wire leads. Two 13/64" (5.2mm) diameter mounting holes. Size:
5"L x 3 1/4"W x 2 3/16"H (127.0 x 82.6 x 71.0mm).
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
47
E
battery management products
High Efficiency
The Versatile 75912
High efficiency with Schottky diode.
48051 75 Amp at 12V DC
48161 250 Amp
Same as 48160, but with Schottky diodes. Terminations: three
5/16" (7.9mm) studs. Four 9/32" (7.2mm) diameter mounting
holes. Size: 8 1/2"L x 4 3/16"W x 3 13/32"H (215.0 x 122.2 x
86.5mm).
1. Use the 75912 for switching two motors or two battery banks
simultaneously. The two circuits can be different voltages such
as 12V and 24V.
2. Extra safety. When used in one circuit the 75912 controls the
negative and positive sides of the circuit.
Dead Batteries in
Inactive Boats
Your fully charged battery could be dead within as little as two
months if your boat is inactive!
Battery Isolators
Today’s boats all have electronics, and although they require only a
very small amount of current to maintain their memory, over time
that’s enough to kill a battery.
4-Stud Type
ALT
48092, 48122 and 48162.
BAT
+
IGN
BATTERY
ISOLATOR
+ BAT
CIRCUIT
BREAKER
L
MAIN
LOAD
L
SECONDARY
LOAD
3-Stud Type
48070, 48080, 48090, 48120, 48160, and 48161.
ALT
BAT
+
+
BATTERY
ISOLATOR
Rapid ship item. 48
BP
BAT
CIRCUIT
BREAKER
L
L
MAIN
LOAD
SECONDARY
LOAD
Available in retail clamshell pack. Any minor breakdown in insulation in the boat’s electrical system
can result in the same problem. Insulation degradation can occur
as a result of abrasion or infiltration of contaminants such as seawater, or from the use of test prods.
Apart from the disappointment and inconvenience, there are two
very important reasons to avoid complete battery discharge.
First, contaminants can crystallize on the battery plates, and the
battery will no longer hold a full charge – an irreversible process.
The second problem occurs with cold temperatures. When a battery is fully charged, its electrolyte freezes at -83ºF (-64ºC), but
when it’s discharged it freezes at a higher temperature closer to
32ºF (0ºC). Resulting ice buildup can break intercell connections or
even crack the case.
A good way to prevent a dead battery is to fully charge it, then
disconnect the ground cable. In this state the battery can hold a
charge for about a year. This procedure is highly recommended
when a boat is stored, but it is inconvenient for short term storage.
Installation of a Cole Hersee Master Disconnect or a SureStartTM
Low Voltage Disconnect will prevent problems.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
momentary & push-pull switches
Push-Button Switches
Push-Button Caps
Push-Pull Switches
Push-Pull Accessories
F
F1
F2
F3
F4
M-626-02 With Screw-On Cap BP
Same as M-490, but with screw-on black rubber cap 83280-03.
F1 Push-button switches
Normally 0ff
SPST. Off - Momentary On. On with button depressed, spring return
to Off. Corrosion-resistant brass case, plunger button and mounting
hardware. Moisture-repellent insulators. Chrome-plated buttons and
facenuts, except where noted.
M-612 With Recessed Button BP
Same as M-490, but with recessed facenut, designed to prevent
accidental actuation.
Extra Heavy Duty
35A at 12V, 20 at 24V, 10A at 36V DC.
M-490 BP
Two brass screw terminals. Mounting stem; brass 5/8"-32 thread,
1 3/8" (34.9mm) long, fits panels up to 1" (25.4mm) thick.
Silver contacts.
M-491 With Large Button BP
Same as M-490, but with large anodized aluminum button, 15/16"
(23.8mm) diameter.
M-626 With Snap-On Cap BP
Same as M-490, but with snap-on black rubber cap 407-03.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
49
F
momentary & push-pull switches
Heavy Duty
Normally On
10A at 12V DC. For 6-36V DC applications.
SPST. On - Momentary Off. Off with button depressed, spring return to
On. Corrosion-resistant brass case and mounting hardware. Gasket-
sealed case. 10A at 12V DC.
M-492 BP
Two brass screw terminals. Brass mounting stem 5/8"-32, 1 3/8"
(34.9mm) long. Fits panels up to 1" (25.4mm) thick.
M-639 With Chrome Plunger
Chrome-plated brass plunger. Two brass screw terminals.
Brass mounting stem 5/8”-32 thread, 1” (25.4mm) long.
Fits panels up to 3/4” (19.1mm) thick.
M-492-01*
Same as M-492 except with blade terminals.
M-485 With 1" Stem, and Gasket BP
Two brass screw terminals. Brass mounting stem 5/8"-32,
1" (25.4mm) long. Fits panels up to 3/4" (19.1mm) thick.
Gasket-sealed case.
M-914-01 With Nylon Cap Plunger
Two brass screw terminals. Brass mounting stem 3/8"-32 thread,
1" (25.4mm) long. Fits panels up to 3/4" (19.1mm) thick.
M-524 With Snap-On Cap
Same as M-485 except with snap-on black rubber cap 407-03.
M-485-01
Same as M-485 except with blade terminals.
M-485-02
Same as M-485 except with screw-on black rubber cap
83280-03.
M-608 PVC-Coated BP
PVC-coated body sealed against moisture and dirt, with black
rubber snap-on cap 407-03. Two 12" (304.8mm) 18AWG leads.
Brass mounting stem 5/8"-32, 15/16" (23.8mm), fits panels up
to 1/2" (12.7mm) thick.
Typical Applications
for push-button & push-pull switches
Horn: 9187, M-492, M-490, M-608, M-612, M-626, M-626-02
Start: 9187, M-492, M-490, M-608, M-612, M-626, M-626-02
Stop: M-530
Hatch/Door: 9006, 90043-07, 90043, 91126
Lights: M-476, M-482, M-482-01, M-532 (3 circuit)
Windlass: 9250
Nav light: M-476, M-532
Single Wiper: M-482, M-527, M-606
Magneto: Rapid ship item. 50
BP
Available in retail clamshell pack. M-530
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
momentary & push-pull switches
Specialized Push-Button Switches
90002 Normally On, Sealed
Weather-resistant and dust-resistant. Gasket-sealed case
and O-ring in stem. Two screw terminals with lockwashers.
Mounting stem: 5/8"-32 thread, 1 1/16" (26.9mm) long.
90002-01 Normally On, Sealed, Heavy-Duty
Same as 90002, except with silver contacts for heavy duty
applications up to 36V DC.
F
9006 Normally On, With Boot BP
Black rubber boot covers and protects the face of the switch,
making it dust-resistant. Plastic button. 4A at 12V DC lamp load.
Two 2mm x 5mm blade terminals. 4A at 12V DC.
9044 Normally Off
2 screw terminals. Mounting stem: 5/8"-32 thread, 1.06"
(26.9mm) long. Gasket seal in the case. Chrome-plated brass
button and facenut. Steel case. 10A at 12V DC.
91126 Normally On, PVC-Coated
PVC-coated body for moisture and dirt protection. Two 7"
(177.8mm) wire leads. Mounting stem: 7/16"-20 thread,
.44" (11.2mm) long. Steel button, .38" (9.7mm) diameter.
90043 Normally On, Sealed, With Rubber Cap
Two blade terminals accept 2-pole Delphi (Packard) connector
2977647 or equivalent. Mounting stem: 5/8"-32 thread, .625"
(15.9mm) long. Gasket seal in the case. Steel plunger protrudes
through the snap-on rubber cap. Plated steel case. Solid silver
contacts 20A at 12V DC, make and break, 30A continous.
9187 Normally Off, Black Button BP
5A at 12V to 24V DC. Two blade terminals .250" wide (6.4mm).
Nickel-plated brass hexnut and facenut. Nylon push-button, .410"
diameter (10.4mm). Body size (to top of terminal): .890"L
x .560"W x .773"H (22.6 x 14.2 x 19.6mm).
9187-01 Normally Off, White Button
Same as 9187, except with white/natural nylon color button.
9187-02 Normally Off, Red Button
Same as 9187, except with red button.
BP
90043-07 PVC-Coated, Sealed, With Rubber Cap
Same as 90043, except with PVC-coated body and two 7"
(177.8mm) 18AWG wire leads.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
51
F
momentary & push-pull switches
9250 Momentary Windlass Switch
35A at 12V, 20A at 24V DC. Picture shows typical vertical mounting
location. Mounting plate and diaphragm are not supplied. OffMomentary On, spring return to Off. Brass case and mounting
hardware. Silver contacts. Two brass screw terminals. Brass
mounting stem 5/8"-32 thread, 7/16" (11.1mm) long, fits panels
up to 3/16" (4.8mm) thick. Anodized aluminum button 15/16"
(23.8mm) diameter. Plunger button is loose, and must be held in
place with rubber diaphragm.
F3 push-pull switches
Marine Construction
10A at 12V DC, 6-36V DC. Brass mounting hardware included.
One Circuit
Brass housing, brass mounting stem 3/8" -32 thread, 1 1/4" (31.8mm)
long. Fits panels up to 3/4" (19.1mm) thick.
M-482 SPST Off-On BP
Normally Off. Two brass screw terminals. Chrome-plated brass
knob. Gasket-sealed case.
F2 push-button Caps
Threaded Caps
Rubber cap is permanently fastened to the integral mounting nut by a
rolled brass bezel. The deep threaded 5/8"-32 aluminum mounting nut
assures a positive seal. Durable, resilient rubber, embossed ‘PUSH’. Fits
Cole Hersee and all other push button switches with a 5/8"-32 thread
mounting stem.
M-482-01 SPST Off-On BP
Normally Off. Two brass blade terminals. Chrome-plated brass
knob. Gasket-sealed case.
83280 Gray
83280-02 Red
83280-03 Black
M-482-02 SPST Off-On
Normally Off. Two brass screw terminals. Black plastic knob,
10-32 thread, and set screw. Gasket-sealed case.
BP
83280-05 Oil-Resistant
Resistant to gasoline and diesel fuels. Cap is molded from resilient
Hydrin which provides excellent resistance. Brown color.
Push-Pull Ignition
Snap-on Caps
Ribs on the inside of the rubber cap engage with the
switch facenut.
407-01 Gray
407-02 Red
BP
BP
407-03 Black
BP
Push-pull ignition and start switch 9576. See page 4.
Rapid ship item. 52
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
momentary & push-pull switches
M-606 SPST Off-On BP
Normally Off. Brass housing, plasticized. Two insulated copper
wire leads, 12" (304.8mm) long. Chrome-plated brass knob,
10-32 thread.
M-628 SPST Off-On BP
Normally Off. Two brass screw terminals. Chrome-plated brass
knob, 10-32 thread.
M-486 SPST Off-On "Pull"
Normally Off. Brass case and mounting hardware. Two brass
screw terminals. Brass mounting stem 3/8"-32, 1 1/4" (31.8mm)
long. Fits panels up to 7/8" (22.2mm) thick. Chrome-plated brass
knob, embossed 'PULL,' 7/8" (22.2mm) diameter.
M-530 SPST Off-On
Normally On. Gasket-sealed brass housing. Two brass screw
terminals. Chrome-plated brass knob. Brass mounting stem,
3/8"-32 thread, 1 1/4" (31.8mm) long.
F
M-531 SPST Off-On-On BP
Off - On A&B - On B&H. Brass housing. Three brass screw terminals. Chrome-plated brass knob 10-32 thread. Brass mounting
stem, 3/8" -32 thread, 1 1/4" (31.8mm) long, fits panels up to 1"
(25.4mm) thick. With brass facenut, washer and hexnut.
M-630 SPDT On-On
Brass housing. Three screw terminals. Chrome-plated brass knob.
Brass mounting stem, 3/8" -32 thread, 1 1/4" (31.8mm) long, fits
panels up to 1" (25.4mm) thick. With brass facenut, washer and
hexnut.
Three Circuits
M-532 Running lights, Anchor Light, Headlights BP
SPDT Off-On1-On2. On 1 Battery, running lights, anchor light.
On 2 Battery, running lights, headlights. Brass housing. Four
brass screw terminals. Chrome-plated brass knob 10-32 thread.
Brass mounting stem, 3/8" -32 thread, 1 1/4" (31.8mm) long,
fits panels up to 1" (25.4mm) thick. With brass facenut, washer
and hexnut.
M-476 SPDT Off-On-On BP
Off-On1-On1&2, normally Off. Three screw terminals. Chromeplated brass knob. Applications include control of lighting circuits,
including cabin and running lights.
Two Circuits
M-527 SPST Off-On BP
Normally Off. Brass housing. Three brass screw terminals.
Chrome-plated brass knob 10-32 thread. Brass mounting stem,
3/8" -32 thread, 1 1/4" (31.8mm) long, fits panels up to 1"
(25.4mm) thick. With brass facenut, washer and hexnut.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
53
F
momentary & push-pull switches
Plated Brass Knobs
F4 Push-pull accessories
Chrome-plated solid brass, no imprint.
Brass Facenuts
8113-10
Face diameter 7/8" (22.2mm), 10-32 thread.
Chrome-plated brass, or nickel-plated brass.
8340 To Fit 3/16" Shaft
5/8" (15.9mm) hex, 1/4" (6.4mm) thickness. 3/8"-24 thread to
fit 3/16" (4.8mm) shaft. Chrome-plated brass.
8197-10
Face diameter 3/4" (19.0mm), 10-32 thread.
8343 To Fit 1/4" Shaft
5/8" (15.9mm) hex, 1/4" (6.4mm) thickness. 7/16"-28
thread to fit 1/4" (6.4mm) shaft. Chrome-plated brass.
8304
Round knurl 3/4" (19.0mm) diameter, 1/4" (6.4mm) thickness.
5/8"-32 thread. Chrome-plated brass.
Running Lights
US Collision regulations (COLREGS)
83307 For Toggle Switches
Nickel-plated brass. Round knurl 9/16"
(14.3mm) diameter, 1/16" (1.6mm)
thickness. 15/32"-32 thread.
Brass Hexnuts
For Mounting Of Switches
Vessels under 12 meters length
Vessels 12-21
meters length
White, Red, Green
or Yellow 360°
2 nautical miles
2 nautical miles
Masthead
2
3
Stern
2
2
Red & Green
1
2
Towing
2
2
12 meters = 39.4ft, 20 meters = 65.6ft
Boats under 23ft may carry a 360° lantern or flashlight in
lieu of running lights. International regulations allow sailboats
under 20 meters to display a single masthead tricolor navigation light while under sail. Suitable Push-Pull light switches
– M-476 and M-532.
8346 3/8-32
1/2" (12.7mm) hex, 3/32" (2.4mm) thick.
8338 5/8-32
7/8" (22.2mm) hex, 1/8" (3.2mm) thick.
Rapid ship item. 54
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
G
breakers & fuses, blocks, connectors
Circuit Breakers & Accessories
Fuses
Terminal Blocks
Trailer Connectors
G1 circuit breakers & Accessories
Plastic Case Breakers
30406 12V Type III
Available in: 25, 30, 40, 50A.
G1
G2
G3
G4
Glass Fuse Breakers
30410 12V Type II BP
An inexpensive way to upgrade your fuses to breakers! Breaker
replaces 3AG (AGC) and SFE glass fuses: snaps into standard
clips on Cole Hersee fuse blocks.
(See page 61).
Available in 10, 15, 20, 25, 30, 35,
40A, and in BP as 30410-30 BP.
30407 12V Type III, With Cross-Bracket
Available in: 15, 20, 25, 30, 40, 50A .
Mini Breakers
30419 12V Type II
Gray plastic housing with silver cover.
Available in 10, 15, 20 and 25A.
30423 24V Type III
Available in: 10 and 15A.
Breaker Types
SAE Type II and Type III are considered appropriate for
marine applications. Type II remains open (circuit is broken)
as long as the overload exists. It resets after the power is
manually turned off and the overload is corrected. Type III is
manual. It remains open until the button on the breaker is
manually reset.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
55
G
breakers & fuses, blocks, connectors
ATC/ATO Breakers
Inline Fuse/Breaker Holders
Conform to SAE J553. Replacement for ATC or ATO fuses. Color-coded
housings with rating marked on the top: 10A red, 15A blue, 20A yellow,
25A silver, 30A green.
Protect circuits and equipment from damaging overloads.
30147 ATC/ATO Fuse Holder BP
Accepts ATO and ATC fuses and circuit breakers from 3A to 20A.
Easy to install and easy to change the fuse. 16AWG insulated
copper wire leads, 4" (101.6mm) long. Brass contacts. Supplied
without a fuse.
Terminals are grooved so that they can be easily snapped off
with pliers to fit.
30411 Type II
Silver housing with rating marked on the top.
Available in: 10, 15, 20, 25, and 30A.
3031 Glass Fuse Holder
Accepts SFE fuses through 20A and 3AG (AGC) fuses through
30A. Positive twist-lock seal will not open accidentally; large
brass contacts maintain solid contact with the fuse for maximum
efficiency. 14AWG wire leads, 8" (203.2mm) long. Brass contacts.
To install, cut wire loop.
30413 Type III
Available in: 10, 15, 20, 25, and 30A.
3031-0 Without Fuse
BP
3031-14 With 14A Fuse
3031-20 With 20A Fuse
Breaker mounting brackets
Durable, lightweight molded nylon. Breakers mount securely using
stud and hexnut. Mounting holes .280" x .440" (7.1 x 11.2mm).
Slots are .910" (23.1mm) on centers, and .210" (5.3mm) wide.
BP
3031-30 With 30A Fuse
30183 Mini Fuse Holder BP
Accepts Mini Fuses, or breakers 2-30A. Body material
withstands high temperatures. Up to 32V at 30A.
87128-4, 4-Gang
5.69" long (114.5mm), mounting holes 4.89"
(124.2mm) on centers.
87128-6, 6-Gang
7.51" long (190.8mm), mounting holes 6.71"
(170.4mm) on centers.
30186 Maxi Fuse Holder
Accepts Maxi Fuses or breakers 20-60A. Up to 32V at 30A.
87128-8, 8-Gang
9.33" long (237.0mm), mounting holes 8.53"
(216.7mm) on centers.
87128-10, 10-Gang
11.15" long (233.2mm), mounting holes 10.35"
(262.9mm) on centers.
Rapid ship item. 56
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
breakers & fuses, blocks, connectors
Busbars
For connecting circuit breakers to provide higher amperage ratings.
Holes/slots are .910" (23.1mm) on centers. Hole size: .210" (5.3mm).
G
ABYC Busbar Standards
Brass Busbars
Boats are built and repaired to ABYC standards, which are
requirements based on years of practical experience.
86099-2, 2-Gang
E9.16.K.
86099-3, 3-Gang
(10) No more than four conductors shall be secured to any one
terminal stud. If additional conections are necessary, two or more
terminal studs shall be connected together by means of jumpers
or copper straps.
86099-4, 4-Gang
86099-5, 5-Gang
(11) Ring and captive spade type terminal connectors shall be the
same nominal size as the stud.
(12) Conductors terminating at switchboards, in junction boxes, or
fixtures shall be arranged to provide a length of conductors to be
fanned at terminal studs.
Copper Busbars
Slotted. Recommended for use with nylon mounting brackets 87128.
Slots are .910" on centers. Slot width: .210" (5.3mm). Width of bar:
.560" (14.2mm).
(13) The shanks of terminals shall be protected against
accidental shorting by the use of insulation barriers or sleeves,
except for those used in grounding systems.
86126-2, 2-Gang
1.41" L (35.81mm).
86126-4, 4-Gang
3.23" L (82.1mm).
Dead Batteries in
Inactive Boats
86126-6, 6-Gang
5.05" L (128.3mm).
86126-8, 8-Gang
6.87" L (174.5mm).
Your fully charged battery could be dead within as little as two
months if your boat is inactive!
86126-9, 9-Gang
7.78" L (197.6mm).
Today’s boats all have electronics, and although they require only
a very small amount of current to maintain their memory, over
time that’s enough to kill a battery.
86126-12, 12-Gang
10.51" L (267.0mm).
Any minor breakdown in insulation in the boat’s electrical system
can result in the same problem. Insulation degradation can occur
as a result of abrasion or infiltration of contaminants such as seawater, or from the use of test prods.
Brackets & Busbars
Apart from the disappointment and inconvenience, there are two
very important reasons to avoid complete battery discharge.
Nylon Brackets and Busbars
Brackets in a range from 4-gang to 10 gang conveniently house
and organize the stud-type circuit breakers and can be used
with slotted busbars from 2-gang to 12-gang to create a variety
of circuitries.
First, contaminants can crystallize on the battery plates, and the
battery will no longer hold a full charge – an irreversible process.
The second problem occurs with cold temperatures. When a battery is fully charged, its electrolyte freezes at -83ºF (-64ºC), but
when it’s discharged it freezes at a higher temperature closer to
32ºF (0ºC). Resulting ice buildup can break intercell connections
or even crack the case.
A good way to prevent a dead battery is to fully charge it, then
disconnect the ground cable. In this state the battery can hold a
charge for about a year. This procedure is highly recommended
when a boat is stored, but it is inconvenient for short term storage.
Installation of a Cole Hersee Master Disconnect or a SureStartTM
Low Voltage Disconnect will prevent problems.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
57
breakers & fuses, blocks, connectors
G
Connectors
G2 fuses
30245 Quick-Connect Bullet Socket
Provides fast and easy connect and disconnect for many
applications, including vehicle to trailer connections.
For 18AWG to 14AWG wires. 20 per pack.
30223 Quick-Tap Splicer and Tap
10 per pack.
Part number suffixes indicate the amperage, eg: AGC98113-10 is a 10A
glass fuse. Note that all fuses have a 3-letter prefix to match industry
standards. Circuit breakers and fuses are a cost-effective solution to
protecting wiring, equipment and subsystems. Essentially, fuses are a onetime, disposable solution. Circuit breakers can be re-used after overload.
BP
Maxi
Mini
ATC
Quick-Tap Wire Splicer
MAX 98111 Maxi Blade Fuse
Available in 20, 30, 40, 50A and 20, 30, 40A .
BP
ATC 98108 Blade Fuse
Available in 5, 10, 15, 20, 25, 30, 40A and 10, 15, 20, 30A .
No need to strip the wire!
To make a Tap Splice
With the splicer open:
Press the existing circuit wire (red wire in the picture)
into the outer channel.
Press the tap wire (yellow) into the inner channel.
Snap the splicer cover into place.
Squeeze with pliers.
ATM 98107 Mini Blade Fuse
Fast-acting type.
Available in 5, 10, 15, 20, 25, 30A and 10, 15, 20, 30A .
AGC 98113 Glass Fuse
Available in 1/4, 1/2, 3/4, 1, 1 1/2, 2, 3, 4, 5, 6, 7, 8, 9,
10, 15, 20, 30, 40A and 1/4, 1/2, 1, 3, 4, 5, 7, 10, 20A.
BP
BP
BP
To make an Inline Splice
With the splicer open:
Press one wire (yellow) into the outer channel.
Press the other wire (red) into the inner channel.
Snap the splicer cover into place.
Squeeze with pliers.
Upgrade Your
System To Breakers!
If you use a terminal block that accepts glass fuses, it's easy
to upgrade to 30410 breakers. See page 55.
To make a Pigtail Splice
With the splicer open:
Press one wire (red) into the outer channel.
Press the other wire (yellow) into the inner channel.
Snap the splicer cover into place.
Squeeze with pliers.
Rapid ship item. 58
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
breakers & fuses, blocks, connectors
G3 terminal blocks
Terminal Blocks, Common Busbar
G
46206-04 BP
4-gang, with solid brass busbar. 10-32 stud terminals with
hexnuts and lockwashers. Two eyelets for mounting with 3/16"
(4.76mm) screws (not included). Eyelets are 3.125" (79.4mm) on
centers. Moisture-repellent thermoset plastic insulator base. 3
7/8"L x 5/8"W x 27/32"H (44.4 x 15.9 x 21.4mm).
With One Busbar
Available in solid brass or tin-plated solid brass.
M-449 10-Gang BP
Solid brass busbar safely carries up to 150A. Two 1/4-20 brass
studs with hexnuts. 8-32 round head screws for attachment of
wires. Two mounting holes accept No.10 countersink flathead
screws. Moisture-resistant molded thermoplastic insulator base.
5 3/4"L x 1 1/4"W x 1 1/32"H (146.0 x 31.7 x 26.1mm). Two
mounting holes 5.19" (131.8mm) on centers.
With Two Busbars
Two solid brass busbars, hard fiber insulator base, 8-32 screws.
Width: 2.25" (57.2mm), height: 3/8" (9.5mm). Mounting holes .75"
(19.1mm) on centers.
M-649-04 4-Gang
2.75" long (98.5mm).
M-449-04 10-Gang, Tin-Plated Brass BP
Same as M-449, but all brass is tinned for corrosion-resistance.
M-649-06 6-Gang BP
4.25" long (108.0mm).
M-448 20-Gang BP
Same as M-449, but with 20 outlets. Length: 8 7/8" (225.4mm).
Two mounting holes 8.31" (211.1mm) on centers.
M-649-08 8-Gang
5.75" long (146mm).
Red Light On –
White Light Off
M-448-02 20-Gang, Tin-Plated Brass
Illuminated toggle switch clearly identifies On and Off positions.
Available in SPST On-Off and SPDT On-Off-On. See page 18.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
59
G
breakers & fuses, blocks, connectors
Terminal Blocks, Individual Feed
4721-P3 3-Gang
Length: 3.25" (82.6mm). Eyelets are 2.50" (63.5mm) on centers.
Moisture-repellent molded Bakelite insulator base with barrier strips.
Nickel-plated brass terminal links and 8-32 binding head screws.
Width: 1.31" (33.3mm), height: .67" (17.0mm).
4721-P4 4-gang
Length: 3.87" (98.3mm). Eyelets are 3.12" (79.2mm) on centers.
4721-P5 5-Gang
Length: 4.5" (114.3mm). Eyelets are 3.75" (95.3mm) on centers.
M-426 4-Gang BP
Length: 3.22" (81.8mm). Paired mounting holes 2.81"
(71.4mm) on centers.
4721-P6 6-Gang
Length: 5.12" (130.0mm). Eyelets are 4.38" (111.3mm)
on centers.
4721-P8 8-Gang
Length: 6.37" (161.8mm). Eyelets are 5.62" (142.7mm)
on centers.
M-427 6-Gang BP
Length: 4.33" (110.1mm). Paired mounting holes 3.93"
(99.9mm) on centers.
M-428 8-Gang BP
Length: 5.46" (138.7mm). Paired mounting holes 5.06"
(128.5mm) on centers.
4721-P10 10-Gang
Length: 7.62" (193.5mm). Eyelets are 6.87" (174.5mm)
on centers.
4721-P12 12-Gang
Length: 8.87" (225.3mm). Eyelets are 8.12" (206.2mm)
on centers.
4721-P14 14-Gang
Length: 10.12" (257.0mm). Eyelets are 9.37" (238.0mm)
on centers.
M-429 10-Gang BP
Length: 6.59" (167.4mm). Paired mounting holes 6.19"
(157.2mm) on centers.
Smart Battery Isolators
M-456 14-Gang
Length: 8.84" (224.5mm). Paired mounting holes 8.44"
(214.4mm) on centers.
Prevents loads on an auxiliary battery from draining the starting
battery. More versatile than conventional isolators, it works with
all types of alternator, and allows bi-directional charging from
alternator to shore power. See page 46.
With Stud Terminals
10-32 thread stud terminals with hexnuts, flat washers and lockwashers. Two eyelet mounting holes for 3/16" (4.8mm) screws
(screws not included). Moisture-repellent phenolic insulator base.
5/8" (15.9mm) wide x 27/32" (21.4mm) high.
4721-P2 2-Gang
Length: 2.62" (66.5mm). Eyelets are 1.87" (47.5mm) on centers.
Rapid ship item. 60
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
breakers & fuses, blocks, connectors
G
For Glass Fuses and 30410 Breakers
Common Hot Feed
For SFE 20A or 3AG (AGC) fuses, and 30410 circuit breakers.
(See page 55 & 58).
Fiber base, 2.24" (56.9mm) wide, with 11/64" (4.4mm) diameter
mounting holes. Solid brass busbar, phosphor-bronze fuse clips.
Height: 5/8" (15.9mm). Brass terminals and screws.
Individual Hot Feed
Nickel-plated phosphor-bronze plated fuse clips. Hard fiber
insulator base with 11/64" (4.4mm) diameter mounting holes.
Width: 2 1/4" (57.2mm), height 5/8" (15.9mm). Brass terminals
and screws. Mounting holes .75" (19.0mm) on centers.
M-414-01 Brass 4-Gang
Length: 2 3/4" (98.5mm).
BP
M-415-01 Brass 5-Gang
Length: 3 1/2" (88.9mm).
Also available with steel terminals and screws: 4625-01.
M-412 2-Gang
Length: 1 1/4" (31.8mm).
M-641-01 Brass 6-Gang BP
Length: 4 1/4" (108.0mm).
Also available with steel terminals and screws: 4626-01.
M-414 4-Gang
Length: 2 3/4" (69.9mm).
M-643-01 Brass 8-Gang
Length: 5 3/4" (146.1mm).
M-415 5-Gang
Length: 3 1/2" (88.9mm).
M-645-01 Brass 10-Gang
Length: 7 1/4" (184.2mm).
BP
M-647-01 Brass 12-Gang
Length: 8 3/4" (222.3mm).
No More Dead Batteries!
New Ignition Switches
SureStartTM Low Voltage Disconnect switches automatically
disconnect ancillary loads before battery power is insufficient
to start the boat. They automatically reconnect when voltage
has been restored.
Prolongs battery life by preventing irreversible damage due to
excessive discharge. See section E1.
Rapid ship item. BP
Available in retail clamshell pack. New 95060 Series is fully sealed and has an integral Deutsch
connector. See page 1.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
61
breakers & fuses, blocks, connectors
G
For Plug-In Breakers & Fuses
For ATC and ATO fuses and circuit breakers. Fuse/breaker contacts are
recessed for safety. Recessed area in the center of the block accepts
a label. Electrical ratings: 25A maximum per circuit at 12V to 24V DC.
150A maximum total for the block at 12V DC. For 24V DC applications
use only ATC or ATO fuses.
Black thermoplastic block. Blade terminals are .25" wide
(6.4mm). Stud terminal is 10-32 with hexnut, flat washer and
lockwasher. Four .218" (5.5mm) diameter mounting holes take
#10 screws. Size: 3.375" wide x .812" high (85.7 x 20.6mm).
Mounting holes 1.06" (27.0mm) on centers, widthwise.
With Common Hot Feed &
Common Ground
46379-6 6-Gang
Length 3.77" (95.8mm). Mounting holes .625" (15.9mm)
on centers.
46379-8 8-Gang
Length 4.39" (111.5mm). Mounting holes 1.25" (31.8mm)
on centers.
With Common Hot Feed Only
46377-6 6-gang BP
Length: 2.47" (62.7mm). Mounting holes .625" (15.9mm)
on centers.
46379-10 10-Gang BP
Length 5.02" (127.5mm). Mounting holes 1.88" (47.6mm)
on centers.
M-674 Combination Fuse Block & Terminal Block
For SFE 20A or 3AG (AGC) fuses. Common hot feed to four
independently-fused circuits, and common ground strip for
four circuits. Solid brass busbars, terminals and terminal screws.
Nickel-plated phosphor-bronze fuse clips. Two eyelet holes for
mounting with 3/16" (4.8mm) screws, 2.25" (57.2mm) on centers. 3 1/2"L x 2 3/4"W x 25/32"H (88.2 x 69.8 x 19.8mm).
46377-8 8-Gang
Length: 3.09" (78.5mm). Mounting holes 1.25" (31.8mm)
on centers.
Accepts 30410 Breakers
46377-10 10-Gang BP
Length: 3.72" (94.5mm). Mounting holes 1.875" (47.6mm)
on centers.
46377-12 12-Gang
Length: 4.34" (110.0mm). Mounting holes 2.5" (63.5mm)
on centers.
46377-14 14-Gang
Length: 4.97" (126.2mm). Mounting holes 3.125" (79.4mm)
on centers.
Reversing
Polarity Switches
For changing the direction of permanent magnet motors.
46377-18 18-Gang
Length: 6.22" (158.0mm). Mounting holes 4.375" (111.1mm)
on centers.
Sealed Rocker Switches (Page 12)
58027-18
Mom On - Off - Mom On
58311-18
Mom On - Off - Mom On
LOAD
B+
Toggle Switches (Page 18)
55046-06
Mom On - Off - Mom On
Interchange
1
4
2
5
3
Want to select a replacement part? Check Section J.
Rapid ship item. 62
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
breakers & fuses, blocks, connectors
G4 Trailer connectors
Connectors with Screw-on Caps
M-121 2-Pole Pair, Brass Screws
Brass terminal screws.
G
BP
Molded insulator bodies. Precision-machined contacts. Knurled caps
unscrew for easy connection of wires, and protect against weather and
dirt. Terminal ID .110" (2.8mm) accepts up to 12AWG stranded wire.
M-118 2-Pole Pair, Polarized, Brass Screws
BP
1238 2-Pole Polarized Plug And Socket
Screw-on cap protects the socket from dirt and moisture when
not in use. Polarized for proper mating of circuits. Includes
one 1102-F plug. Mount in 45/64" (17.9mm) diameter hole in
panels up to 3/8" (9.5mm) thick. Plated steel cap and housing.
Recommended Wire Sizes
Fire can result when a wire gets overheated because there's
too much current flowing through it. It is important to use
the correct wire size that's appropriate to the amperage and
length of the wire that you're using. Use the wire rating next
above the amperage needed.
Both fuses and ciruit breakers stop dangerous overcurrent
by rapidly shutting down an overloaded circuit. Fuses are
one-use devies; circuit breakers can be re-set.
This American Boat & Yacht Coucil table indicates how much
amperage each wire can carry:
Connectors with Rubber Caps
Polarized to assure proper mating of circuits. Molded insulator bodies.
Precision-machined brass contacts. Rubber caps protect connectors.
1134 4-Pole Pair
Circuit identification printed on the insulator.
M-115 4-Pole Pair, Brass Screws BP
Same as 1134, but with brass terminal screws.
M-114 3-Pole Pair, Brass Screws
Brass terminal screws.
Wire Size
Ohms
per 1000ft
Ampacity inside
the engine
compartment
Ampacity outside
the engine
compartment
18AWG 0.8mm2
6.385
20
17
16AWG 1mm2
4.016
25
21.3
14AWG 2mm 2.525
35
29.8
12AWG 3mm2
1.588
45
38.3
10AWG 5mm2
0.9989
60
51
8AWG 8mm2
0.6282
80
68
6AWG 13mm2
0.3951
120
102
4AWG 19mm2
0.2485
160
136
2
2AWG 32mm
0.1563
210
178.5
1AWG 40mm2
0.1239
245
208
0AWG 50mm2
0.09827
285
242.3
2/0AWG 62mm2
0.07793
330
280.5
3/0AWG 81mm2
0.06180
385
327.3
4/0AWG 103mm2
0.04901
445
378.3
2
You can calculate the voltage drop (volts) across a length of wire (ft)
at a given amperage (amps)... Voltage drop = wire length x amperage
divided by 1000 x ohms per 1000ft.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
63
G
breakers & fuses, blocks, connectors
Universal Trailer Connectors
Switch Connectors
Weatherproof connectors & wire lead assemblies. Polarized to assure
proper mating of circuits. Molded bodies. Color-coded 16AWG wire, 6"
long (152.4mm). Conductors are properly aligned and bonded into the
insulation, to assure minimal voltage drop, and for ease in connecting.
31101 Sealed Key Switch Connector
Six-pole connector fits all 95060 Series switches. Connector
is 0.77 x 0.77 x 1.26" (19.7 x 19.7 x 32.0mm) with six 16AWG
(1.0mm2 ) GXL 6" (152.4mm) wire leads.
11135 5-Pole Pair
11134 4-Pole Pair
Ignition switch wire colors for use with 95060 Series switch
per ABYC recommendation.
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
BP
11134-08BP 4-Pole Pair, With Splicers BP
Retail pack with 11134 and eight 30223 Quick-Tap wire splicers.
11173 3-Pole Pair
BP
11172 2-Pole Pair
BP
Red - Battery
Yellow with red stripe - Start
Orange - Accessory
Purple - Ignition
Purple - Ignition
Red - Battery
12804 LVD Connector
Color-coded wires conform to ABYC Standard Deutsch 4-pin
plug with 6" wires fits Compact Low Voltage Disconnect 48513.
16AWG (1.00mm sq) SXL wires. Black wire to pin1, purple to 2,
white to 3, orange to 4.
1160 Document Holder Tube
Weatherproof tube protects important papers. 5" x 1 1/8"
(127.0 x 28.6mm). Captive brass screw-on cap. Brass
flange, aluminum body. Three 3/16" (4.8mm) diameter
mounting holes in the flange.
Rapid ship item. 64
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
monitoring devices H
Buzzers & Alarms
Pilot Lights
Monitoring Switches
H1 Buzzers & Alarms
Buzzers & Alarms
4099 Universal Buzzer 12V DC BP
Hundreds of uses. For engine overheating, high water or any
system that needs an alarm. Works with any temperature,
pressure, door or momentary switch. Electrical contacts are
designed for instant response and uninterrupted signal.
H1
H2
H3
M-40177BP Marine Engine Warning Kit BP
For inboard and outboard engines with 12V DC electrical
system. Handy kit includes buzzer 4099, temperature switch
84251, and pressure switch 8606. Alarm sounds when oil
pressure is too low and/or engine coolant temperature is too
high. Installation instructions included.
Impact-resistant ABS resin case. Moisture-repellent insulator.
Two screw terminals with lockwashers. Size: 1 7/32"L x 2 1/2"W
x 2 17/32"H (30.9 x 63.2 x 64.3mm).
40151 24V Buzzer
Same as 4099, but for 24V DC systems.
IGN
BAT
+
4112-RC Buzzer/LED Pilot Light “Dual Alarm” BP
Rugged combination warning light and buzzer give audible and
visible alert. Universal application: use with any electrical switch.
Red lens, long-life LED. 11/16" (17.46mm) diameter mounting
stem, 17/32" (13.88mm) long. Body size: 1 7/8"L x 1"W x 1
11/32"H (47.6 x 25.4 x 34.1mm). Wiring is the same as in the
M-40177 in the next column. 12V DC. Also available as 24V.
Item No. 4124-RD.
Rapid ship item. BP
Available in retail clamshell pack. BUZZER
OIL
TEMP
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
65
H
monitoring devices
40212 Dual Rate Electronic Alarm 12V DC
Utilizes advanced integrated circuit surface mount technology.
Negative ground. Use with two input sources to warn of two
different hazardous conditions. Sounds at two different rates:
one sensor triggers a fast-rate alarm, the second actuates a slower
rate alarm tone. Also available in 24V. Order number 40224.
Minimum sound level: 90dB. Lightweight molded plastic
housing. Solid-state circuitry. Size: 2.005"L x 1.185"W
x .930"H (50.4 x 30.3 x 23.6mm). Plugs into Cole Hersee
Sealed Beam Connector 3032 or 3029, Delphi (Packard)
12033871, or accepts individual connectors for 1/4"
(6.4mm) blades.
H2 Pilot Lights
LED Pilot Lights
12V DC. With rugged light-emitting diode light source that
ensures long hours of service. Never needs bulb replacement.
Mounting hole: 0.546" diameter(13.9mm). Quick connect .250"
(6.4mm) terminals are polarized for ease of wiring. Body length
1.248" (31.7mm), maximum bezel diameter 0.630" (16.0mm).
Fits into panels .020" through .300" thick (0.5 to 7.6mm).
Nickel-plated washer and hexnut. Also available in 24VContact Cole Hersee.
PL-612-R red
PL-612-G green
PL-612-B blue
PL-612-A amber
SENSOR
OR SWITCH
FAST
SLOW
B
B+
+
SENSOR
OR SWITCH
Incandescent Pilot Lights
40205 SigmaTM Alarm Switch
This item is both switch and alarm, and contains a highly audible
warning signal within the rocker switch.
Compatible with microprocessor-based systems, the alarm switch
can provide status warning in such applications as: door/hatch
ajar, high/low pressure, high/low temperature, on-off, and many
other situations, as well as providing an alarm override for the
Cole Hersee SureStartTM Low Voltage Disconnect Switch 48510
and 48512.
LED power source 5V or 12V DC; alarm power source 12V DC.
Fits standard panel opening. Designed to meet SAE J1455
environmental standard. See page 13.
12V DC. Corrosion-resistant construction. Spring-actuated brass
contacts assure proper contact with the bulb. Items with wire leads
are 16AWG (1.0mm2) insulated stranded copper leads, 8" (203mm)
long. All items are provided with 12V bulb.
M-320
Single contact. Insulated. Plastic socket. 17/32" (13.5mm)
diameter lens. Chrome-plated brass bezel 7/8" (22.2mm)
diameter. 3/4" (19.1mm) diameter mounting stem, 1 1/16"
(27.0mm) long. 12V #53 bulb supplied. Two leads.
M-320-GC green
M-320-RC red
Rapid ship item. 66
BP
Available in retail clamshell pack. BP
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
monitoring devices
M-326
H
H3 monitoring switches
Double contact. Metal socket. Faceted lens 15/16"(23.8mm)
diameter lens, gasket-sealed. Chrome-plated brass bezel 1 1/4"
(31.8mm) diameter, 7/8" (22.2mm) diameter mounting stem,
1 1/4" (31.8mm) long. 12V #68 bulb supplied. Two leads.
M-326-AC amber
M-326-RC red
Temperature Switches
All items are self-grounding. Switches are normally Off and utilize PTF
or NPTF dryseal thread which require no sealant. Senders use PTF
thread. Connect switches to a warning light or buzzer, connect senders
to a gauge. For use with a single indicator.
84210
On at 239° to 271°F. 1/2" -14 thread.
1/2" -14 dryseal thread mounting stem (PTF-SAE short).
Mounting hex flat 15/16". (115.0 – 132.8°C).
M-328, Stainless Bezel
Single contact. Insulated. Plastic socket. Red 5/8" (15.9mm)
diameter lens, with internal honeycomb pattern. Satin finish
stainless steel bezel 3/4" (19.1mm) diameter, 1.2" (12.7mm)
diameter mounting stem, 7/8" (22.2mm) long. 12V #53 bulb
supplied. Two leads.
DL-75-12V Single Contact Panel Lamp
Snap-in mounting. Brass socket. One 18AWG (0.8mm) wire
lead, 30" long (793mm), with blade terminal. Snaps into 1 1/4"
(31.8mm) holes in panels .150" to .250" (3.8 to 6.4mm) thick.
One spring prong is eliminated for indexing in keyed holes.
Gasket-sealed lens and weatherproof sleeve. Frosted non-glare
lens. Chrome-plated brass bezel/hood 1.52” (38.7mm) diameter.
Supplied with 12V #67 bulb. Fixed hood. Self-grounding in metal
panels.
No More Dead Batteries!
Low Voltage Discconnect electronically senses battery voltage and
conserves starting power. See page 37 and 38.
Rapid ship item. BP
Available in retail clamshell pack. 84218
On at 184° to 216°F. 1/2" -14 thread.
Same as 84210, but with different range.
84227
On at 232° to 264°F. 1/2" -14 thread
Same as 84210, but with different range.
84236
On at 251° to 283°F. 1/2" -14 thread.
84229
On at 246°to 266°F. 3/8" -18 thread.
3/8" -18 dryseal thread mounting stem (NPTF).
Mounting hex flat 13/16". Stud terminal. (118.9 – 130.0°C).
84248
On at 253° to 273°F. 3/8" -18 thread.
3/8" -18 dryseal thread mounting stem (NPTF).
Mounting hex flat 13/16". (122.8 – 133.9°C).
.250" blade terminal.
84251
On at 190° to 210°F. 3/8" -18 thread.
Same as 84248, but with different range.
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
67
H
monitoring devices
Oil Pressure Switches
8606 SPST
Off at: 2 - 6 psi. 1/8" -27 thread.
Normally On, Off at: 2 - 6 psi (13.8 – 41.4 kPa).
.250" blade terminal. 1/8" -27 mounting stem.
8609 SPST
Off at: 4.5 - 7.5 psi. 1/8" -27 thread.
Normally On, Off at: 4.5 - 7.5 psi (31.0 – 51.7 kPa).
8-32 stud terminal. 1/8" -27 mounting stem.
8610 SPST
Off at: 4.5 - 7.5 psi. 1/8" -27 thread.
Same as 8609, but with combination blade and stud terminal.
86284 SPST
On at: 2 - 6 psi. 1/8" -27 thread.
Insulated, normally Off. On at 2 - 6 psi (13.8 – 41.4 kPa).
Mounting stem: 1/8"-27 dryseal thread.
86302-02 SPST
On at: 4-11 psi. 1/8" -27 thread.
Insulated, normally Off. On at 4-11 psi (27.5 - 75.8 kPa).
Two silver-plated male blade terminals .25" (6.4mm) wide.
86281 DPST
1/8" -27 thread.
One grounded, one insulated circuit. Mounting stem: 1/8"-27
dryseal thread. Operation: circuit 1 – terminal 2 normally closed to
ground, opens at 2 - 8 psi (13.8 – 55.2 kPa); circuit 2 - terminals
1 & 3 normally open, close at <11 psi (75.9 kPa).
2
1
Oil Pressure/Electric Choke
Switches
3
New Ignition Switches
86272 SPST
On at: 2 - 6 psi. 1/8" -27 thread.
Insulated, normally Off. On at 2 - 6 psi (13.8 – 41.4 kPa).
Mounting stem: 1/8"-27 dryseal thread.
New 95060 Series is fully sealed and has an integral Deutsch
connector. See page 1.
Rapid ship item. 68
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
point-of-purchase
I
ED
HOT FE
Information
NEW
Products
on New
ny
Hersee Compa
from Cole
200 Amp
ic Relay
Electron
.
applications from
igh power
ating.
other loads
For ultra-h
and overhe
motors and
Protects due to overcurrent
damage
ons
TSHARDTOACCESS
VIRONMENEINSTALLATIONS
RINTENSIV
)DEALFORSEVEREEN
D
LOCATIONSANDLABO CAUSEDBYREPEATES
SOLENOID
DOWNTIME
2EDUCES ENTOFCONVENTIONAL
REPLACEM
Applicati
& Benefits
LITY
NTCAPABI
NTSFROM
TPUTCURRE
ESYSTEMCOMPONE
EXPENSIV
s0ROTECTS
RCURRENT
ND
UETOOVE
CTWEARA
DAMAGED
TESCONTA
ATEDESIGNELIMINA CYCLES
s3OLIDST
TO
ERVICELIFE
EXTENDSS
VEREENVIRONMENTS
REDFORSE
s%NGINEE
Features
s(IGHOU
48520
Corrosion
XTREMES
6IBRATION
UMIDITYE
UREANDH
4EMPERAT
ROTECTED
)GNITIONP
3EALEDELECTRONICS
ons
Specificati
D-616
Clamshell Packaging
Assortment Kits
Merchandising Aids
Literature
I1
I2
I3
I4
I1 Clamshell packaging
Clamshell Packaging
Many of our popular product items are packaged in see-through
clamshells. Items that are available in clamshell are denoted
throughout this catalog with a symbol, and in the price list with
the suffix ‘BP’. If you want clamshell items, be sure to order using
the BP suffix.
All BP items are packed 6 per inner-pack,
6 inner-packs per case pack, 36 items per case pack.
I2 Assortment kits
Assortment Kits
Assortment kits contain an assortment of relays, and are very helpful
at the counter, to assist a customer in making a purchase. Plastic
compartment box measures 8" x 6" x 1 7/8" (203 x 158 x 46mm).
Planogramming of clamshells is easy because most items fit in
one of three clamshell pegboard profiles. Clamshell packaging is
crush resistant and recloseable, and protects the contents during
shipping. Product description and information is trilingual (English,
Spanish and French.)
SD-40* Relays Kit
Contains a selection of 40A and 70A relays. For more details,
request sheet D-608 or view it on the Cole Hersee website.
For more information on how the clamshell can maximize
planogram space, download sheet D-597 from our website.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
69
point-of-purchase
I
I3 merchandising aids
I4 literature
Merchandising Aids
Literature
These signs are available free of charge with order.
F-1245 Metal Sign
Lightweight aluminum sign is supplied with foam tape for
adhesion to any smooth flat surface, or it can be tacked to a wall.
Size: 24" X 15" (610 x 381mm).
D-275 Master Catalog
Contains the broadest range
of our products. Also available
in downloadable PDF format
on our website.
D-400 Heavy Duty Catalog
Contains products suitable for
heavy duty and off-road vehicles.
F-1244 Large Card Sign
Two-sided card sign can be hung, or attached to a pegboard
display of Cole Hersee products. Size: 19" x 7" (483 x 178mm).
‘Hot Feed’ Spec Sheets
A range of sheets that give details on specific products or
groups of products. For a complete listing see our website.
F-1243 Small Card Sign
Two-sided card sign can be hung, or attached to a pegboard
display of Cole Hersee products. Size: 10 1/2" x 5" (267 x 127mm).
HOT FEED
Information on New Products from Cole Hersee Company
ED
HOT FE
Products
ion on New
Informat
Hersee
from Cole
y
Compan
itches
cker Sw
Sigma Ro
i°
܈ÌV…Êvi ð
ÀœVŽiÀÊÃ
ˆVÊÃÞÃÌi“
vÀˆi˜`ÞÊ
iiVÌÀœ˜
ˆÌ…ÊÕÃiÀ‡
iVÌÀˆV>É ˆÌˆœ˜Ã°
Ã܈ÌV…ÊÜ
‡L>Ãi`Êi
“LÀ>˜iÊ
œ˜`
ÀÀi˜Ìʓi ʓˆVÀœ«ÀœViÃÜÀ ʜÀÊ>`ÛiÀÃiÊV
Àˆ˜i
UʜÜÊVÕ
̈LiÊ܈̅ Ì>LiÊvœÀʓ>
\ÊÃՈ
UÊ
œ“«>
Ì>˜Ì
ERSEEAT
}°
iÈÃ
ZEDBY#OLE(
VŽˆ}…̈˜
UÊ7>ÌiÀ‡À
Customizable
ANBECUSTOMI
iÊÊL>
Readily
BERACTUATORC G
DGRAPHICS
UÊ,iˆ>L
MIMPRINTAN
s3ILICONERUB GLASERETCHIN
NEW
™
COLORSCUSTO
LOWCOSTUSIN
TOMMOLD
UDEDIFFERENT F,%$LENS
LEUSINGACUS
s/PTIONSINCL ANDLOCATIONO
ISALSOVARIAB
SHAPECOLOR
FTHEACTUATOR
s4HESHAPEO
58500
s
CTORORPIN ECTOR
Specification
-OLEXCONNE CENTERSCONN
s!CCEPTSPIN
EPINX
XSQUAR
6$#
OURCE6$#
s,%$POWERS TACTRATINGM!AT
Hª#
UMCON
ª#THROUG
s-AXIM
NTALSTANDARD
PERATURERANGE
MM
ENVIRONME
s/PERATINGTEM
X
MEET3!%*
GX
s$ESIGNEDTO
TOMM
PANELOPENIN
TO
s&ITSSTANDARD
ICKNESSOF
ANELTH
s&ITSP
NEW
Forward & Reverse
Relay Module
UÊޘ>“ˆVÊLÀ>Žˆ˜}°
UÊ
>ÀÀˆiÃÊ>ʅi>ÛÞʏœ>`ÊVÕÀÀi˜Ì°
UÊՏÞÊÃi>i`ÊqÊV>˜Ê܈̅ÃÌ>˜`ÊÛiÀÞÊ
…>ÀÅÊi˜ÛˆÀœ˜“i˜Ìð
UʘÌiÀ“ˆÌÌi˜ÌʜÀÊVœ˜Ìˆ˜ÕœÕÃʜ«iÀ>̈œ˜°
Informa
tion on
New Prod
ucts
NEW
)DEALFORTARPORLIFTAPPLICATIONS!LSOUSEONHOISTSHATCHES
WINCHESSNOWPLOWSINTAKEEXHAUSTFANSVEHICLEOUTRIGGERS
ANDOTHERREVERSINGAPPLICATIONS-ODULEAUTOMATICALLYREVERSESTHE
DIRECTIONOFTHEMOTORWHENTHEAPPROPRIATECONTROLCIRCUITISENERGIZED
WITHAPULSEFROMACONTROLSWITCH$YNAMICBRAKINGSTOPSTHEMOTORWHEN
THESWITCHRETURNSTO/FF,OWPROFILEMODULESAVESSPACE3TUDSARESECURELY
ANCHOREDINEPOXY™™(™™MM
Specifications
s(IGHPERFORMANCESILVERTINOXIDECONTACTSASSURELONGCYCLELIFE
s!AT6$#INTERMITTENTMAX/NTIMEMINS/FFTIMEMINS
!AT6$#CONTINUOUS
s,OADCURRENTINRUSH!0ULLINVOLTAGE6MAX
s,OWCOILCURRENTDRAW#OILRESISTANCEΩ ±10%.
s6IBRATIONRESISTANCE(Z$OUBLEAMPLITUDEMM
s%NVIRONMENTAL#TO#2USTANDMOISTURERESISTANT
PLASTICHOUSING
200 Am
from Cole
Hersee
)DEALFORS
s)GNITIONPROTECTED
LOCATIONS EVEREENVIRONM
s4INPLATEDBRASSSTUDSANDHARDWAREFORCORROSION
ANDLABOR
ENTS
RESISTANCE
INTENSIVEI HARDTOACCESS
2EDUCESD
s$IELECTRICSTRENGTH62-3BETWEENCOILANDCONTACT
REPLACEME OWNTIMECAUSED NSTALLATIONS
NTOFCONV
BYRE
s&ORINTERMITTENTOPERATIONCONTROLSWITCHSHOULDBE
ENTIONALS PEATED
-OM/N/FF-OM/NFORCONTINUOUSOPERATION
OLENOIDS
Features
/N/FF/N
& Bene
55046 DPDT Reverse Polarity Toggle
25A at 12V DC Mom On – Off – Mom On.
Four blade terminals.
fits
s(IGHOUT
PUTCURREN
TCAPABILIT
s0ROTECTS
Y
EXPENSIVE
DAMAGEDU
SYST
ETOOVERCU EMCOMPONENTS
s3OLIDSTA
RRENT
FROM
EXTENDSSETEDESIGNELIMI
RVICELIFET NATESCONTACTW
O
s%NGINEER
EARAND
CYCLES
EDFORSEV
EREENVIRO
Corrosion
NMENTS
6IBRATION
4EMPERATU
75712-04 Rotary Reversing Switch
REANDHUM
)GNITIallows
IDITYEXTRE
Heavy duty 50A at 12V DC switch
ONPROTECT
MES
ED
forward & reverse without a3EALE
relay.
DELECTRON
ICS
/LD#OLONY!VENUE"OSTON-!53!ss&AX
3EEOURINTERACTIVEPRODUCTCATALOGATwww.colehersee.com
Compan
y
p Electr
o
For ultr
a-high
power
Protec
applica
24452
damagets motors and
tions.
!PROTECTIVECOVER
due to
oth
ISALSOAVAILABLE
overcu er loads from
rrent and
s&ULLYSEALEDTO)0WITHHIGHSTRENGTHEPOXYFORTOTAL
Applicatio
overhe
MOISTUREPROTECTION
ns
atin
"̅iÀÊ,iÛiÀȘ}Ê
œ“«œ˜i˜ÌÃ
24401 SPDT Double-action Solenoid
85A at 12V DC. Use a pair of these
solenoids in a reversing circuit. 12V
24401, 24V 24402, 36V 24400.
s&AX
s
!53!
hersee.com
OSTONww.cole
OLONY!VENUE"UCTCATALOGATw
/LD#
IVEPROD
3EEOURINTERACT
HOT F
EED
12V DC high power motor reversing relays.
nic Rela
y
g.
Cole Hersee
48520
part numbe
r
Specifi
cations
s%NVIRONME
D-612
ƒ# NTAL
TOƒ#3!
%LECTR
ONICSSEALED%**
)GNITIO
NPROTECTED TO)0
%-)2
&)PROTECTED TO)3/
TO3!%*
D-611
s%LECTRICAL
6 !CONTINU
#ONTR
OLCURRENT OUS)NRUSH!
M!MAX
FORSECS
s$IMENSION
S
,X7
XXX(
THETO
POFTHESTUD MM(EIGHTISM
S
EASUREDTO
/LD#OLONY
3EEOURINTERA !VENUE"OST
CTIVEPRODUCTCON-!53!
ATALOGA
Twww.colehes
s&AX
rsee.co
m
D-616
Rapid ship item. 70
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
J
interchange
Product interchange to Cole Hersee parts.
Listed alphabetically by brand name.
Suggested replacement parts are electrically identical, but they may have some physical characteristics that are different, and so may not be an
exact equivalent. This listing is based on the most recent information and interpretation at the time of publication of this catalog.
Cole Hersee unsealed relays are supplied with a separate snap-in bracket. It is not necessary to order a separate bracket.
American Zettler
Ancor
American Zettler
220110.........................30220
220120.........................30219
220202.........................31302
220203.........................31304
220211.........................31301
220212.........................31303
220213.........................31305
401182.........................31240
401252.........................31241
401312.........................31242
401372.........................31243
401502.........................31244
401572.........................31246
401622.........................31245
553051.........................M-426
553052.........................M-427
553053.........................M-428
553054.........................M-429
554000.........................82159-1
554001.........................82159-2
554002.........................82159-3
554009.........................98628
554010.........................M-58031-01
554022.........................M-58031-07
554024.........................58326-01
554026.........................M-58031-02
554030.........................M-58031-04
554033.........................M-58031-05
554035.........................M-58031-09
555010.........................55014
555022.........................55037
555026.........................55016
555028.........................55033
555033.........................55017
555105.........................81264-01
555700.........................5582
555702.........................5570
556010.........................54100-01
556022.........................54101-01
556026.........................54103-01
556028.........................54104-01
556110.........................M-54111-01
556111.........................54109-01
Cole Hersee
AZ973-1A-12DC3........RA-400112-NN
AZ973-1A-12DC1........RA-400112-NN
AZ973-1A-12DC3D1......RA-400112-DN
AZ973-1A-12DC1D1....RA-400112-DN
AZ973-1A-12DC4D1....RA-400012-DS
AZ973-1A-12DC3R1...RA-400112-RN
AZ973-1A-12DC1R1...RA-400112-RN
AZ973-1C-12DC3........RC-400112-NN
AZ973-1C-12DC1........RC-400112-NN
AZ973-1C-12DC3D1....RC-400112-DN
AZ973-1C-12DC1D1....RC-400112-DN
AZ973-1C-12DC4D1....RC-400012-DS
AZ973-1C-12DC3R1....RC-400112-RN
AZ973-1C-12DC1R1....RC-400112-RN
AZ973-1A-24DC3........RA-200124-NN
AZ973-1A-24DC1........RA-200124-NN
AZ973-1A-24DC3D1....RA-200124-DN
AZ973-1A-24DC1D1....RA-200124-DN
AZ973-1A-24DC4D1....RA-200024-DS
AZ973-1A-24DC3R1...RA-200124-RN
AZ973-1A-24DC1R1...RA-200124-RN
AZ973-1C-24DC3........RC-200124-NN
AZ973-1C-24DC1........RC-200124-NN
AZ973-1C-24DC3D1....RC-200124-DN
AZ973-1C-24DC1D1...RC-200124-DN
AZ973-1C-24DC4D......RC-200024-DS
AZ973-1C-24DC3R1....RC-200124-RN
AZ973-1C-24DC1R1....RC-200124-RN
AZ980-1A-12D*..........RA-700112-NN
AZ979-1A-12D*..........RA-700112-NN
AZ980-1C-12D*...........RC-700112-NN
AZ979-1C-12D*...........RC-700112-NN
* These American Zettler relays
are rated at 80A, the Cole Hersee
relays at 70A
Ancor
Ancor
Cole Hersee
220809.........................31102
220808.........................31103
220100.........................30238
Rapid ship item. BP
Cole Hersee
Available in retail clamshell pack. Ancor
Cole Hersee
601002..........................AGC98113-1/4
601005.............................AGC98113-1/2
601010.............................AGC98113-1
601015.............................AGC98113-1.5
601020...........................AGC98113-2
601030...........................AGC98113-3
601040...........................AGC98113
601050...........................AGC98113-5
601060...........................AGC98113-6
601070...........................AGC98113-7
601075.............................AGC98113-7.5
601080...........................AGC98113-8
601100...........................AGC98113-10
601150...........................AGC98113-15
601200...........................AGC98113-20
601300...........................AGC98113-30
603905...........................ATM98107-5
603910...........................ATM98107-10
603915...........................ATM98107-15
603920...........................ATM98107-20
603930...........................ATM98107-30
604005.........................ATC98108-5
604010.........................ATC98108-10
604015.........................ATC98108-15
604020.........................ATC98108-20
604025.........................ATC98108-25
604030.........................ATC98108-30
607017.........................30147
Blue Sea Systems
Blue Sea Systems
Cole Hersee
2203.............................46211-01
2204.............................46211-R
2305.............................46206-04
2404.............................M-426
2406.............................M-427
2408.............................M-428
2410.............................M-429
4138.............................81264-01
4150.............................5582
4151.............................55037
4152.............................55016
Blue Sea Systems
Cole Hersee
4154.............................55033-01
4155.............................55019
5138................................MAX98111-30
5139................................MAX98111-40
5140................................MAX98111-50
5239.............................ATC98108-5
5241.............................ATC98108-10
5242.............................ATC98108-15
5243.............................ATC98108-20
5244.............................ATC98108-25
5245.............................ATC98108-30
7503.............................48811-01
8266.............................82159-2
8267.............................82159-1
8268.............................82159-3
8278.............................98628
8290.............................M-58031-09
8292.............................M-58031-07
9001e...........................M-750
Bosch
Bosch
Cole Hersee
0 332 019 150...............RA-400112-NN
0 332 019 151...............RA-400112-NN
0 332 019 155...............RA-400112-DN
0 332 209 150................RC-400112-NN
0 332 209 151................RC-400112-NN
0 332 209 159...............RC-400112-RN
0 332 209 161...............RC-400112-RN
0 332 209 203................RC-200124-NN
0 332 209 211.................RC-200124-NN
0 332 209 204................RC-200124-DN
Bosch SPST relays have 5 terminals;
Cole Hersee relays have 4 terminals.
Bussmann
Bussmann
Cole Hersee
121A25.........................30056-25
121A35.........................30056-35
121B15.........................30056-15
121B25.........................30056-25
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
71
J
interchange
Bussmann
Cole Hersee
121B20.........................30056-20
121B40.........................30056-40
121H10.........................30404-10
121H15.........................30404-15
121H20.........................30404-20
121H25.........................30404-25
121H30.........................30404-30
121H40.........................30404-40
121L10.........................30056-10
121L20.........................30056-20
123A-15-A2P-HA..........30407-15
123A15-B4P-HA............30407-15
123A20-B4P-HA............30407-20
123A20-00P..................30406-20
123A30-A2P-HA............30407-30
123A30-00P..................30407-30
123A40-00P..................30407-40
ATC-5............................ATC98108-5
ATC-10..........................ATC98108-10
ATC-15..........................ATC98108-15
ATC-20..........................ATC98108-20
ATC-25..........................ATC98108-25
ATC-30..........................ATC98108-30
ATC-40..........................ATC98108-40
ATM-5...........................ATM98107-5
ATM-10.........................ATM98107-10
ATM-15.........................ATM98107-15
ATM-20.........................ATM98107-20
ATM-25.........................ATM98107-25
ATM-30.........................ATM98107-30
MAX-20.........................MAX98111-20
MAX-30.........................MAX98111-30
MAX-40.........................MAX98111-40
MAX-50.........................MAX98111-50
HHB..............................3031-0
HHX...............................30186
HHM..............................30183
HHC..............................30147
Guest
Guest
Cole Hersee
2100.............................M-752
2101.............................M-750
2102.............................M-744*
2110.............................M-752
2111.............................M-750
2401A...........................48070*
2430.............................48120*
3100.............................M-752
3101.............................M-750
3200.............................M-753
3201.............................M-751
3102.............................M-744*
* Not UL or CE
Hella
Hella
Cole Hersee
87402...........................RA-400112-NN
87401...........................RC-400112-NN
87499...........................RC-400112-NN
87104...........................RC-400112-DN
87424...........................RC-400112-DN
87404...........................RC-400112-RN
87420...........................RC-400112-RN
Rapid ship item. 72
BP
Hella
Cole Hersee
49401...........................RC-400112-RN
49400...........................RC-400112-RN
87427...........................RC-200124-DN
87115...........................RC-200124-RN
87426...........................RC-200124-RN
87430...........................RA-700112-RN
87432...........................RA-700112-RN
Perko
Perko
Cole Hersee
52.................................26100
276...............................M-435
310...............................M-550
321...............................M-531
366...............................M-532
514...............................5570
647...............................M-674
688...............................M-484
701...............................M-608
749...............................M-121
751...............................M-115
786...............................3031-20
8501.............................M-750
8502.............................M-751
105(1)...........................M-628
105(2)...........................M-628
105SP...........................M-628-BP
196-1 ..........................31240
196-2 ..........................31241
196-3 ..........................31242
196-4 ..........................31243
196-5 ..........................31244
196-6 ..........................31245
196-7 ..........................31246
255(1)...........................M-492
255SP...........................M-492-BP
381(1)...........................M-476
720-2 ..........................11172
720-3 ..........................11173
720-4 ..........................11134
Prestolite/Ametek
Prestolite is now Ametek.
Prestolite/Ametek
Cole Hersee
15-1 ............................24090
15-10 ..........................9107
15-10 ..........................24041
15-104 ........................24023
15-12 ..........................2427
15-121 ........................9060
15-122 ........................9060
15-123 ........................24037 or
24022
15-129 ........................24041
15-131 ........................24041
15-132 ........................24059
[24059-08]
15-133 ........................24143
15-134 ........................24037
15-136 ........................24037
15-137 ........................24047
[M-200-01]
15-139 ........................24106
15-14 ..........................2427
15-140 ........................24082
Available in retail clamshell pack. Prestolite/Ametek
Cole Hersee
15-141 ........................24063
[24063-08]
15-148 ........................24047
[M-200-01]
15-149 ........................24046
15-15 ..........................2427
15-150 ........................24047
[M-200-01]
15-157 ........................24055
15-160 ........................24041
15-161 ........................24027
15-163 ........................24037
15-164 ........................24060
15-168 ........................24041
15-169 ........................24041
15-17 ..........................24041
15-174 ........................24103
15-183 ........................24044
15-189 ........................24037
15-191 ........................24041
15-192 ........................24063
[24063-08]
15-2 ............................24090
15-202 ........................24106
15-204 ........................24063
[24063-08]
15-212 ........................24060
15-220 ........................24059
[24059-08]
15-220 ........................24055
15-223 ........................24046
15-225 ........................24039
15-232 ........................24037
15-236 ........................24143
15-247 ........................24037
15-249 ........................24059
15-254 ........................24060 or 24046
15-265 ........................24143
15-268 ........................24022
15-269 ........................24063
15-28 ..........................2427
15-29 ..........................24041
15-2C ..........................24020
54-35 .......................... 7787
54-3D ..........................7762
54-3F .........................7787
54-4D...........................7762
54-ID ...........................7774
5-77 ............................2430
70-9 ............................5507
71-BF............................95808
71-10C ........................95864
71-10D ........................95506
71-10F . .......................95654
71-11F . .......................95658
71-13F . .......................95672
71-14D ........................95507
71-14F . .......................95673
71-16F . .......................95858
71-1C ..........................9548
71-1F . .........................9537
71-1U ..........................9577
71-20D.........................95498
71-210 ........................95507
71-220 ........................95803
Prestolite/Ametek
Cole Hersee
71-28D.........................95674
71-29D.........................95682
71-2F . .........................95503
71-2U ..........................9578
71-3 ............................95656
71-340 ........................95832
71-350 ........................95832
71-3C ..........................95645
71-3F . .........................95624
71-3U ..........................9579
71-40 ..........................95507
71-4C ..........................9603
71-4F . .........................95643
71-5C ..........................9589
71-5F . .........................9589
71-6F . .........................95802
71-7C ..........................95647
71-7D ..........................95499
71-7F . .........................95802
71-8 ............................9535
71-9C ..........................95818
71-9D...........................95506
71-9F . .........................95651
71-SC ..........................95650
72-1 ............................71077
72-1C ..........................71067
72-2C ..........................71041
72-2F . .........................71046
72-2U ..........................7157
72-3C ..........................71061
72-4C ..........................71064
72-4D...........................71092
72-4F . .........................71045
72-4U ..........................7178
90-174D.......................24092
90-179-D . ...................24091
90-202 ........................24092
90-203 ........................24091
90-2C ..........................24118
90-325 ........................24091
90-326 ........................24118
PU-4001 ......................30037
PU-4002 ......................30037
PU-4003 ......................30037
PU-4008 ......................30037
PU-4050 ......................30037
PU-5001 ......................30037
SAD-4001 ....................24090
SAD-4001-A ................24090
SAD-4101.....................24090
SAD-4301.....................24090
SAD-4401.....................24090
SAD-4501.....................24090
SAD-4503.....................24090
SAE-4001 ....................24037
SAE-4002 ....................24047
[M-200-01]
SAE-4003 ....................24047
[M-200-01]
SAE-4004M...................24060
SAE-4005 ....................24037
SAE-4005T ..................24037
SAE-4006 ....................24037
SAE-4007 ....................24047
[M-200-01]
SAJ-4005 ....................24037
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
interchange
Prestolite/Ametek
Cole Hersee
SAP-453 ......................24021
SAS-4201 ....................24059
[24059-08]
SAS-4202.....................24059
[24059-08]
SAS-4203.....................24037
SAS-4203M..................24037
SAS-4205.....................24037
SAS-4206.....................24047
[M-200-01]
SAS-4208.....................24106
SAS-4209.....................24082
SAS-4212.....................24106
SAS-4213.....................24143
SAS-4214.....................24059
SAS-4211Y...................24103
SAS-4217Y...................24103
SAS-4301.....................24080
[24080-01]
SAS-4302.....................24080
[24080-01]
15-2F............................2426
15-3 ............................24090
15-300 ........................24400
15-301 ........................24401
15-303 ........................24044
15-304 ........................24005
15-305 ........................24084
15-306 ........................24085
15-307 ........................24021
15-31 ..........................2427
15-310 ........................24063
[24063-08]
15-311 ........................24059-08
15-312 ........................24047
15-313 ........................24059-08
15-315 ........................24143
flat bracket
15-316 ........................24143
15-317..........................24063
[24063-08]
15-32 ..........................24047
[M-200-01]
15-322 24059
15-323 24401
15-326 ........................24402
15-330 ........................24144
15-334 ........................24080
[24080-01]
15-348 ........................24047
[M-200-01]
15-365 ........................24022
[24037 steel]
15-386 ........................24401
15-3C ..........................24005
15-3F . .........................24021
15-404 ........................24044
15-406 ........................24103
15-407 ........................24103
15-415 ........................24047
15-418 ........................24023
15-433 ........................24059
15-438 ........................24401-01
15-464 ........................24063
15-47 ..........................9060
15-477 ........................24105
Rapid ship item. Prestolite/Ametek
Cole Hersee
15-482 ........................24008
15-49 ..........................9183
15-4C ..........................24083
15-50 ..........................9060
15-51 ..........................9060
15-57 ..........................24090
15-5F .........................24041
15-6 ............................24047
[M-200-01]
15-60 ..........................24020
15-602 ........................24055
15-62 ..........................24090
15-7 ............................2427
15-75 ..........................24037 or
24022
15-76 ..........................24047
[M-200-01]
15-77 ..........................24046 or
2430
15-79 ..........................24044 or
24020
15-8 ............................24044
15-81 ..........................24047 or
24023
15-83 ..........................9183
15-M ...........................24041
16-133 ........................24059
[24059-08]
16-4 ............................24090
16-5 ............................24022
32-10 ..........................30037
32-17 ..........................30037
32-19 ..........................30037
32-2 ............................30037
32-21 ..........................30037
32-22 ..........................30037
32-52 ..........................30139
36-1C ..........................24118
36-3C ..........................24133
52-1 ............................8629
52-1C ..........................8652
52-1F . .........................8731
52-2 ............................8715
52-2C ..........................8713
52-2D ..........................8487
52-2F . .........................8722
52-3 ...........................8650
52-3C ..........................8729
52-3F . .........................8723
52-4C ..........................8728
52-4F . .........................6732
52-5C ..........................8718
52-5F . .........................8733
52-6C ..........................8719
52-6F . .........................8736
52-7C ..........................8729
52-7F . .........................8737
52-8C ..........................8719
53-1F . .........................9059
53-4 ............................9279
53-5 ............................9011
53-6 ............................M-492
53-7 ............................96101
53-8 ............................96102
53-9 ............................9023
54-1 ............................7769
BP
Available in retail clamshell pack. Prestolite/Ametek
Cole Hersee
54-160 ........................7769
54-16U ........................7770
54-1C ..........................7787
54-2 ............................7776
54-2D ..........................7771
54-2F . .........................7775
72-5D ..........................71092
72-5F . .........................71063
72-6C ..........................71069
72-6F . .........................71055
72-7C ..........................71070
72-7F . .........................71073
72-8C ..........................71078
72-8F . .........................71051
72-IU ...........................7157
72-SC...........................71060
72-SF ..........................71054
73-1 ............................6855-B
73-2 ............................68021-B
74-1 ............................8602
74-11F . .......................86268
74-1J . .........................86294
74-2 ............................8606
74-2C ..........................8611
74-2J . .........................86293
74-2U ..........................86256
74-3D...........................86255
74-3F .........................8642
74-4D ..........................86263
74-50 ..........................86266
74-6D ..........................86267
74-6F . .........................8642
74-9F . .........................86260
74-BF .........................86268
74-IC ..........................8643
74-ID ...........................8600
74-IF . ..........................8642
74-IU ...........................8610
75-1 ...........................8641
75-1D...........................92001
75-2C ..........................92020
75-4C ..........................9253
75-5C ..........................92021
76-1 ............................9075
76-1 F...........................9293
76-1U ..........................9087
76-2 ............................9266
76-2F . .........................9297
76-3D ..........................9265
76-5 ............................5586
76-7 ............................M-484
77-1 ............................1134
77-10 ..........................1222
77-11 ..........................1165
77-12 ..........................11172
77-13 ..........................11173
77-15 ..........................11134
77-17 ..........................11134
77-2 ............................M-121
77-3 ............................1257
77-4 ............................1233
77-5 ............................1232
77-6 ............................1233
77-7 ............................1235
77-8 ............................1236
77-9 ............................12063
Prestolite/Ametek
J
Cole Hersee
78-1 ............................5007
78-10 ..........................3031-20
78-11 ..........................3031-14
78-12 ..........................3031-9
78-13 ..........................5044
78-14 ..........................5018
78-2 ............................5027
78-20 ..........................55021
78-3 ............................M-476
78-4 ............................M-628
78-6 ............................5582
78-8 ............................5558
79-1 ............................84201
79-12D ........................84228
79-13D ........................84214
79-14D ........................84233
79-15D.........................84236
79-16D ........................84230
79-170 ........................84230
79-180 ........................84236
79-2 ............................84206
79-220 ........................84236
79-2C .........................84206
79-2D ..........................84207
79-2F . .........................84224
79-3 ............................84213
79-4 ...........................84204
79-4F . .........................84229
79- 5.............................84206
79-5D...........................84213
79-5F............................84229
79-6D ..........................84213
79-7D ..........................84227
79-9D ..........................84226
79AD ...........................84210
79-IC ...........................84200
79-IF . ..........................84204
7l-8D............................95505
81-1 ............................2560
81-2 ............................2564
81-3 ............................2564
81-4 ............................2564
81-5 ............................1576
81-6 ............................3029
8-38 ............................2430
84-1 ............................30055-30
84-2 ............................30055-15
84-3 ............................30055-8
84-4 ............................30055-20
84-5 ............................30056-30
84-7 ............................30056-8
84-8 ...........................30056-20
SAS-4303.....................24044
SAS-4401.....................24063
[24063-08]
SAS-4410.....................24063
SAS-4416.....................24063
SAS-4609.....................24105
SAS-5201A...................24143
SAS-5201B...................24143
SAS-5202C...................24047
[M-200-01]
SAS-5203A ..................24059
[24059-08]
SAS-5303A-1 . .............24080
[24080-01]
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
73
J
interchange
Prestolite/Ametek
Cole Hersee
SAS-5401 ....................24063
[24063-08]
SAS-5401A ..................24044
SAS-5402D...................24008
SAS-5403A-1 . .............24063
[24063-08]
SAS-5803A...................24059-08
SAW-4201.....................24044
SAW-4201T...................24037
SAW-4203.....................24047
[M-200-01]
SAW-4204.....................24037
SAW-4205.....................24046
SAW-4205M ................24060
SAW-4206.....................24047
[M-200-01]
SAW-4206M ................24047
SAW-4207.....................24037
SAW-4208.....................24047
[M-200-01]
SAW-4209.....................24046
SAW-4210Y...................24044
SAW-4211.....................24060
SAW-4214.....................24039
SAW-4215.....................24037
SAW-4218.....................24060
SAW-4601.....................24041
SAW-4602.....................24055
SAW-4604.....................24041
SAW-4604A...................24041
SAW-4607.....................24041
SAW-4608.....................24027
SAW-4609.....................24055
SAW-5203.....................24047
SAZ-4201 A .................24085
SAZ-4201E ..................24022
[15-544]
SAZ-4201N ..................24021
SAZ-4201BA.................24022 or
24037
SAZ-4201BR.................24023
SAZ-4401 ....................24144
SBC-4201B...................24021
SBC-4201C...................24059
SBC-4201D...................24106
SBC-4301A ..................24084
SBC-4401B...................24059
SBD-4201.....................24401
SBD-4201A...................24401
SBD-4201G...................24401
SBD-4201H...................24401-01
SBD-4401.....................24402
SBD-4301.....................24400
SRP-4385 ....................24044
SRP-438 S....................24084
SRP-439 S ...................24085
SRP-448.......................24092
SRP-451.......................24041
SS-4001 ......................24039
SS-4002 ......................24039
SS-4003 ......................24044
SS-4004 ......................2427
SS-4008 ......................24022
SS-4009 ......................24039
SS-4011 ......................24022
SS-4014 ......................2427
Rapid ship item. 74
BP
Prestolite/Ametek
Cole Hersee
SS-4017 ......................24039
SS-4018 ......................24039
SS-4020 ......................24039
SS-4023 ......................24022
SS-4028 ......................24044
SS-4030 ......................24041
SS-4032 ......................24047
[M-200-01]
SS-4301 ......................24044
SS-4702 ......................24023
SS-5401 ......................24005
SST-4001A ..................24041
SST-4002 . ...................2427
SST-4003 ...................2426
SST-4004 . ...................24039
SST-4010 . ...................24039
SST-4012 . ...................24039
SST-4013 . ...................24047
[M-200-01]
SW-4001.......................9060
SW-4012.......................9183
SW-4013 .....................9060
SW-4014T ...................24023
SW-4015 .....................9060
Sea Dog
Sea Dog
Cole Hersee
8033.............................PL-612-R
8033.............................PL-624-R
8171.............................PL-612-G
8171.............................PL-624-G
8172.............................PL-612-A
8172.............................PL-624-A
9001.............................M-750
9002.............................M-752
420101.........................54100-01
420102.........................54101-01
420103.........................54107-01
420111.........................54109-01
420113.........................54110-01
420121.........................5582
420121.........................M-54111-01
420122.........................55037
420123.........................55016
420123.........................M-54111-02
420124.........................55033
420128.........................55019
420129.........................55065-03
420201.........................M-58031-01
420202.........................M-58031-07
42020...........................M-58031-04
420208.........................M-58031-05
420209.........................M-58031-09
420241.........................56027-01
420242.........................58027-02
420243.........................58027-07
420244.........................58027-11
420251.........................58328-04
420290.........................98628
420291.........................82159-2
420292.........................82159-1
420390.........................M-482
420400.........................M-531
420410.........................M-476
420420.........................M-492
420424.........................83280-03
Available in retail clamshell pack. Sea Dog
Cole Hersee
420425.........................83280-02
420429.........................96101
420441.........................54003
420465.........................M-484
420485.........................M-597
420486.........................M-597
420487.........................M-597
420513.........................4623
420516.........................4626
420526.........................M-641-01
420544.........................M-414-01
420546.........................M-641-01
420554.........................3031-20
420555.........................3031-30
420842.........................30406-20
420844.........................30406-40
422750.........................M-750
426162.........................M-121
426163.........................M-114
426164.........................M-115
426620.........................M-429
426624.........................M-426
426626.........................M-427
426628.........................M-428
426875.........................1134
426876.........................1134
426880.........................11172
428032.........................31240
428033.........................31241
428034.........................31242
428035.........................31243
428037.........................31244
428059.........................31245
428061.........................31246
Sierra
Sierra
Cole Hersee
MP41070-1...................95060-60-BP
MP39760......................M-832-BP
MP40970......................M-597-BP
MP40990......................M-598-BP
MP39200......................M-850-BP
MP41030......................M-850-BP
MP39060......................M-550-BP
MP39080......................M-550-14-BP
MP41000......................M-832-BP
FS40740.......................46377-10-BP
TG40020.......................54100-01-BP
TG40040.......................54103-01-BP
TG40060.......................54109-01-BP
TG40010.......................54110-01-BP
RK40140W....................56000-08-BP
RK40170W....................56003-03-BP
MP39300......................96101-BP
FS40590.......................M-414-01-BP
FS45620.......................M-426-BP
FS45630.......................M-427-BP
FS45650.......................M-428-BP
FS40750.......................M-449-BP
MP39580......................M-476-BP
MP39380......................M-482-BP
TG21070.......................5582-BP
MP39310......................M-492-BP
MP39620......................M-532-BP
TG40300...........................M-54111-01-BP
TG40320...........................M-54111-02-BP
Sierra
Cole Hersee
RK19400S.......................M-58031-01-BP
RK19420S.......................M-58031-02-BP
RK19410S.......................M-58031-07-BP
MP39390....................M-606-BP
MP39350....................M-608-BP
FS40600.....................M-641-01-BP
FS40610.....................M-643-01-BP
FS40670.....................M-649-04-BP
FS40680.....................M-649-06-BP
FS40550.....................M-674-BP
MP39070....................M-712-09-BP
TG21020.....................551800-BP
MP39680....................9187-BP
MP36390....................9187-02-BP
RK19500K...................58328-100-BP
RK19510K...................58328-101-BP
RK19520K...................58328-103-BP
RK40150W..................56001-04-BP
MP39220....................81264-03-BP
MP39240....................81264-01-BP
MP39160....................M-490-BP
MP41040....................95060-50-BP
RK19430.........................M-58031-08-BP
RK19480.........................M-58031-09-BP
RK19490.........................M-58031-05-BP
Tyco
Tyco
Cole Hersee
VF4-11F11......................RA-400112-NN
VF4-11F11-S01..............RA-400112-RN
VF4-15F11......................RC-400112-NN
VF4-15F11-S01..............RC-400112-RN
VF4-11H11.....................RA-200124-NN
VF4-11H11-S01.............RA-200124-RN
VF4-15H11.....................RC-200124-NN
VF4-15H11-S01.............RC-200124-RN
VF7-11F11......................RA-700112-NN
VF7-11F11-S01..............RA-700112-RN
Potter & Brumfield
Potter & Brumfield
Cole Hersee
VF4-41F11......................RA-400112-NN
VF4-41F11-S01..............RA-400112-RN
VF4-45F11......................RC-400112-NN
VF4-45F11-S01..............RC-400112-RN
VF4-41H11.....................RA-200124-NN
VF4-41H11-S01.............RA-200124-RN
VF4-45H11.....................RC-200124-NN
VF4-45H11-S01.............RC-200124-RN
VF7-41F11......................RA-700112-NN
VF7-41F11-S01..............RA-700112-RN
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
notes
Rapid ship item. BP
Available in retail clamshell pack. J
Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
75
featured products
Electronic Latching Relay
Compact Low Voltage Disconnect
For high power loads up to 200A.
Page 29.
Conserves power to start the boat!
Page 37.
Sealed Ignition Switches
With integral connector.
LED Pilot Lights
Never replace another bulb!
Page 66.
SigmaTM Rocker Switches
Master Disconnect Switches
For microprocessor - based control systems.
Protects boats from tampering, theft, and battery drain.
300 Amp capacity!
Page 42.
Forward & Reverse Module
Page 28.
Smart Battery Isolator
Prevents loads on auxiliary battery from draining starting
battery. Page 46.
Rapid ship item. 76
BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
featured products
LED Rocker Switch
2 Circuit Master Disconnect
Super-bright LED.
Page 9.
Disconnect both negative and positive, or use to switch two
loads. Page 45.
Motor Reversing Module
Trouble-free reversing. Unit understands when end of travel is
reached. Page 29.
Locking Rocker Switch
Prevents accidental actuation.
Page 13.
Tin-Plated Brass Busbars
10-gang or 20-gang.
Page 59.
Low Voltage Disconnect
No more dead batteries!
Page 38.
Rapid ship item. BP
Available in retail clamshell pack. Minimum order quantity may apply. Part numbers needed in BOX require a -BX suffix on the purchase order.
Cole Hersee Co. 20 Old Colony Ave, Boston, MA 02127-2467 colehersee.com
77
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement