Savi® W440-M
Savi® W440-M
Wireless headset system
User Guide
TM
Welcome
Congratulations on purchasing your new Plantronics product. This user guide contains instructions for setting up and using your
Savi W440-M (D100-M USB Adapter + WH500 Headset) Wireless Headset System.
Please refer to the separate safety instructions for important product safety information prior to installation or use of the product.
The enclosed DECT Standard wireless product uses restricted wireless radio frequencies that vary by country. DECT Standard devices
are generally authorised for use in Europe, Australia and New Zealand. Use of this DECT Standard product in unauthorised countries is a
violation of law, may disrupt telecommunications networks and devices and can subject you to fines and penalties by regulatory agencies.
For specific countries in which DECT Standard devices may be lawfully used, please consult the following:
http://www.dect.org/content.aspx?id=28
Plantronics Savi User Guide
Contents
1 Package Contents................................................................. 4
6 Making Calls With Your Headset and PC......................... 12
2 System Features.................................................................... 5
Software installation..................................................... 12
3 Headset Setup....................................................................... 6
Installing the headset battery......................................... 6
Making calls with your headset and PC
with Microsoft Lync/Office Communicator................... 12
Customise the headset................................................... 6
Softphone support........................................................ 12
Wearing the headset....................................................... 7
Auto answer.................................................................. 12
Fitting the headset with a headband.............................. 7
Conferencing up to three guest headsets.................... 13
4 System Setup........................................................................ 8
7 Plantronics Control Panel................................................. 14
Connecting the power supply......................................... 8
Devices tab................................................................... 14
Docking and charging the headset................................. 8
Fitting the headset.......................................................... 8
Connecting the USB adapter to your PC....................... 8
USB adapter indicator light............................................ 9
5 Using Your Headset System................................................ 10
Powering up the headset.............................................. 10
Talk time........................................................................ 10
Muting a headset during a call..................................... 10
Right ear headset button functions.............................. 10
Placing the headset in sleep mode............................... 11
Headset tones............................................................... 11
Battery life..................................................................... 11
Headset indicator light.................................................. 11
Subscribing a headset.................................................. 11
Listening to other PC audio.......................................... 11
Plantronics Savi User Guide
Applications tab............................................................ 16
Preferences tab............................................................. 17
About tab...................................................................... 17
8 Plantronics Update Manager............................................ 18
9 Troubleshooting and Common Questions........................ 19
10Appendix........................................................................... 20
Left ear headset/Savi system button functions............ 20
Right ear headset/Savi system button functions.......... 21
1 Package Contents
Savi W440-M USB Adapter and Charger
USB Adapter
Base Power Supply
USB Charging Cable
Charger Base
Savi WH500 Headset
Headset
Headbands
Battery
Fit kit with ear loops, ear tips and foam sleeve
Plantronics Savi User Guide
4
2 System Features
Savi USB Adapter Features
Indicator Light
Subscription Button
Savi WH500 Headset Features
Volume and Mute Button
(press in to mute/unmute)
Headset (fitted with earloop and eartip)
Plantronics Savi User Guide
Call Control Button
Indicator Light
Microphone
5
3 Headset Setup
Installing the headset battery
4 Press in to attach.
Position the battery as shown on the headset and slide
into position until the battery snaps into place.
Left ear loop configuration
1 Choose the size of ear loop that fits most comfortably.
Align the ear loop as shown and insert it onto the
headset.
NOTE This product has a replaceable battery. Use only the
battery type supplied by Plantronics.
2 Rotate the ear loop up 90 degrees.
Customise the headset
The headset can be converted for wearing on the left or right ear
with either an earloop or headband.
90º
90º
Right ear loop configuration
1 Choose the size of ear loop that fits most comfortably.
Align the ear loop as shown and insert it onto the
headset.
3 Choose the size and style of ear tip that fits most
comfortably. Align the ear tip with the notch facing the
microphone as shown.
2 Rotate the ear loop up 90 degrees.
90º
90º
4 Press in to attach.
3 Choose the size and style of ear tip that fits most
comfortably. Align the ear tip with the notch facing the
microphone as shown.
Plantronics Savi User Guide
6
Wearing the headset
Fitting the headset with a headband
When you wear the headset, the microphone should rest as close
to your cheek as possible without touching. The microphone
can be adjusted inward by the pivoting earpiece to optimise the
position of the headset.
The headset can be rotated for wearing on the left or right ear.
1 Hold the headband so it is aligned to receive the headset
as shown and insert the headset into the headband.
1 Slide the headset over and behind your ear and fit the
ear tip into your ear.
2 Place your index finger on the headset indicator light
and gently push it in towards your cheek. As the headset
is pushed in, you will feel soft clicks as the pivoting earpiece
moves the microphone close to your mouth.
2 Rotate the headset up.
3 To optimise the position of the headset, push the
headset in so the microphone is close to your mouth.
Plantronics Savi User Guide
7
4 System Setup
Connecting the Power Supply
Connecting the USB Adapter to your PC
1 Connect the base power supply into the power jack on
1 Insert the USB adapter into USB Port on PC. The indicator
light on the USB adapter will be solid red to indicate the USB
adapter is powered on and will turn solid green when it finds
the headset.
the charger base.
2 Connect the power supply to the outlet. The headset
indicator light will be solid green.
NOTE The headset may have to be charged before the
USB adapter can find it.
Docking and Charging the Headset
2 The USB adapter can be folded as shown.
1 Gently push the headset into the charging cradle.
The charging indicator light on the headset will flash white to
indicate that the headset battery is charging and will turn solid
white when fully charged.
2 Charge for at least 20 minutes prior to first use. A full
charge takes 3 hours.
Charging time
Important NOTE For best performance it is recommended
that Windows is updated with Service Pack levels listed below:
Microsoft Windows® XP Service Pack 3 (SP3) or later
Microsoft Windows Vista® Service Pack 1 (SP1) or later
20 min ......................
Minimum charge
before first use
3 hours ....................
Full charge
Charging Indicator Light
Power Indicator Light
NOTE The USB charging cable can also be used to charge
the headset.
To successfully charge your headset with the USB cable,
the PC must be on and in an active state (not standby). The
charging time will vary according to the number of other
devices drawing power from the PC’s USB port(s).
Plantronics Savi User Guide
8
USB Adapter Indicator Light
USB Adapter Status
USB Indicator Light
Headset subscribed, no activity
Solid green
Headset in talk mode
Flashes green
Headset muted
Flashes red
Incoming call
Flashes red and yellow
Headset not subscribed
Solid red
USB adapter subscription
Flashes green and red
USB adapter conference subscription
Flashes green and yellow
On conference call with one or more guest headsets subscribed
Flashes yellow
Plantronics Savi User Guide
9
5 Using Your Headset System
Powering up the headset
If the headset battery is charged and connected to the headset,
the headset is automatically on.
Volume and mute button
Talk time
With a single full charge, the Savi W440 will provide up to 7 hours
of talk time. Talk time will be reduced when operating in wideband
mode and/or if the headset is used consistently at a far distance
from the adapter. The battery can be replaced, even mid-call,
essentially giving unlimited talk time.
Call control button
Indicator light
Muting a headset during a call
To mute/unmute the call, press the volume/mute button in. The
USB adapter light will flash red when the headset is muted.
When mute is activated, you will hear three high tones. When
unmuted, you will hear three low tones.
After the Plantronics software is loaded, the mute tones can be
turned off by going to Start > Programs > Plantronics Control
Panel > Devices > Device Settings > Headset – Mute Tone.
For your safety, do not use headset at high volumes
for extended periods of time. Doing so can cause
hearing loss. Always listen at moderate levels. For more
information on headsets and hearing visit: plantronics.com/
healthandsafety.
Right Ear Headset Button Functions
This table shows the headset button functions when you are
wearing the headset on the right ear. If you wear the headset
on the left ear, the volume button presses are opposite. See the
appendix for a left ear headset button functions table.
Function
Type of Press
Tones/Lights
Place, answer, or end Short press call control button
calls
1 mid-tone
Increase volume
Short press volume up
1 tone with pitch increase
Decrease volume
Short press volume down
1 tone with pitch decrease
Flash between calls
While on a call, long press volume up or down (at least 1½ sec.)
1 mid-tone
Mute/unmute headset While on a call, press the volume/mute button in
USB adapter flashes green when headset in use
USB adaptor flashes red when muted
3 high tones when muted
3 low tones when unmuted
Low battery warning
Idle: 1 low tone/15 secs
On call: 3 low tones
Plantronics Savi User Guide
10
Placing the Headset in Sleep Mode
Subscribing a Headset
If you won’t be using the headset for a long period of time and
the headset will not be in the charging cradle, you can put the
headset in sleep mode. With the headset idle, press the call
control button for three seconds until you see the headset flash
white twice. To wake the headset, press the call control button
again for three seconds until you see two white flashes.
The headset and USB adapter that are supplied together are
already subscribed to each other. However, if you wish to use
a new headset with your existing USB adapter or you need to
restore subscription to your current headset, the units can be
subscribed to each other by the following method:
Headset Tones
2 Double press the subscription button on the USB
1 Ensure your headset is charged.
adapter. The USB adapter will flash red and green.
Out of range warning
If you are on a call and go out of the operating range, you will
hear three low tones. You will hear a single mid tone when you are
back in range.
3 Press the volume up button (press volume down for left
If you stay out of range, active calls will be suspended. Calls will
be re-established when you walk back into range. If you remain
out of range for more than 5 minutes, the system will drop the
call.
4 When the indicator light on the USB adapter goes solid
If you are not on a call and go out of the operating range and
press the call control button, you will hear a single tone for the
button press and three low tones for the failure to make a link.
Low battery warning
If you are on a call, you will hear a repeated single low tone every
15 seconds indicating that the battery is low. You should recharge
the headset immediately.
If you are not on a call and press the call control button, you will
hear three low tones indicating that the battery is low. You should
recharge the headset immediately.
ear configuration) on the headset for three seconds until
the headset indicator light turns solid white.
green, the headset and the USB adapter are subscribed
to one another.
To ensure subscription was successful, press the call control
button: the headset will flash white and the USB adapter will
flash green.
NOTE If the subscription process times out after two minutes or if
the subscription process fails, the USB adapter indicator light will
become solid red for four seconds and then return to its previous
state. If this occurs, try to re-subscribe the headset again.
Ending Subscription
Battery Life
If the USB adapter is in subscription mode and you want to stop
the adapter from searching for a headset, press the subscription button again. The subscription light will turn solid red for four
seconds and then go to its previous state.
At the lower right corner of your screen in your system tray, your
headset battery status will be indicated with one of the following
icons:
Listening to Other PC Audio
Ensure the PC audio you are trying to listen to is being routed to
your Savi W440-M device.
100% 75%
50%
25%
0%
A warning will be issued if your headset is critically low.
1 Go to “Control Panel” and open “Sounds and Audio
Devices”.
2 In the “Audio” tab select your Savi 440-M under “Sound
Headset Indicator Light
If you are not on a call, you can toggle the headset in-use
indicator light on and off by pressing the headset volume down
button (press volume up for left ear configuration) for three
seconds.
Plantronics Savi User Guide
Playback”.
3 Launch the application that contains the PC audio and
hit play.
11
6 Making Calls With Your Headset and PC
Software Installation
Auto Answer
It is highly recommended that you install the Plantronics software.
Though your Savi system will operate without the software, it will
limit the system’s full capabilities.
Auto answer saves the user a button press to establish the radio
link between headset and adapter.
Install the Plantronics software to enable remote call answer/end
with compatible softphones. The software can be downloaded at
plantronics.com/software.
After installation, to visit the Plantronics control panel, click on
Start > Programs > Plantronics > Plantronics Control Panel.
The Savi W440-M is supplied with auto answer NOT SELECTED
as the default. When auto answer is set to NOT SELECTED you
must press the headset call control button to answer an incoming
call. When Auto Answer is set to SELECTED an incoming call
will be answered when the headset is removed from the charge
cradle.
Making Calls With Your Headset and PC
with Microsoft Lync/Office Communicator
To place a call
1. Short press call control button on headset
2. Dial number using Microsoft Lync/Office
Communicator
To answer a call Short press call control button on headset
To end a call
Short press call control button on headset
*Consult Microsoft Lync/Office Communicator Help for more
information on how to place a call.
Note You can also answer calls directly from Microsoft Lync/
Office Communicator by clicking on the Call Alert that appears on
your PC screen. In this case the call will be directed to the default
speakerphone which may not be your headset. Consult Microsoft
Lync/Office Communicator Help for more information.
Softphone Support
Remote call answer/end from the Savi headset is available for all
softphones with no additional steps by the user except Skype™.
For a list of compatible softphones visit plantronics.com/software.
For Skype support, please follow these steps:
1 Skype will display the following message during the install of
Plantronics Unified Runtime Engine “PlantronicsURE.exe wants
to use Skype”. Choose “Allow Access” to connect.
2 You can also check Savi W440-M Skype connection status by
going to Skype and checking the Tools > Options > Advanced
> Advanced Settings > ”Manage Other Programs Access”
setting.
Plantronics Savi User Guide
12
Conferencing Up to Three Guest Headsets
While on a call, you can subscribe up to three guest headsets to
your USB adapter for conferencing. As you add headsets to the
adapter, an additional headset icon will appear in the Plantronics
Control Panel with a number from 1 to 3 indicating the number of
guest headsets subscribed to the adapter.
Guests may conference in as described below:
1 While you are on a call, place the guest’s headset into
subscription mode.
2 Short press (less than one second) the subscription button on
the USB adapter. The USB adapter light will flash yellow and
green.
3 The USB adapter light will then turn solid yellow and you will
hear a tone in the master headset indicating a guest wishes to
join the call.
4 If you press the call control button on the master headset
within five seconds, the guest is joined to the call.
If you do not press the call control button within five seconds,
the request to join the call is rejected and the guest will hear an
error tone in their headset.
5 Guests may leave the conference call by pressing their call
control button.
When they do you will hear a single tone in the master headset
as each guest leaves the call.
To see how many headsets are subscribed to the adapter, refer
to the lower left-hand corner of the Plantronics Control Panel.
The first headset is the master headset and the number inside
the next headset is the number of guest headsets subscribed to
the adapter. The examples below show 1, then 2, then 3 guest
headsets subscribed to the adapter in addition to the master
headset.
1
Plantronics Savi User Guide
2
3
13
7 Plantronics Control Panel
User preferences and various device settings can be
changed using the Plantronics Control Panel. To start
this program, click Start > Programs > Plantronics >
Plantronics Control Panel.
Devices Tab
To configure your settings, select Plantronics D100-M
from the pull down menu and click the Device
Settings box. Below are the setting options and
defaults for the USB adapter and headset.
NOTE Some parameters that do not apply to a
particular Plantronics device may appear grayed out.
Device Settings – USB Adapter Tab
Options
Feature
Settings
Default
General
Range
High/Med/Low
High
Auto Answer
Selected/Not selected
Not selected
Audio
PC Audio Bandwidth
Wideband/Narrowband
Wideband
Feature Set Lock
Password (required)
Locked/Unlocked
Unlocked
Range
The Savi W440-M is supplied with high range set as the default.
Range can be minimized to help with PC buzzing, improve user
density, or restrict range of users.
Auto Answer
The Savi W440-M is supplied with auto answer NOT SELECTED
as the default. Auto answer saves the user a button press to
establish the radio link between headset and adapter.
To change the Range default in the software, go to : Start >
Programs > Plantronics > Plantronics Control Panel > Device
Settings – USB adapter. You can also change the range setting
by holding in the subscription button of the USB adapter for three
seconds while it is in an idle state. The USB adapter light will flash
green for high range, yellow for medium range and red for low
range.
When auto answer is set to NOT SELECTED you must press
the headset call control button to answer an incoming call.
When Auto Answer is set to SELECTED an incoming call will be
answered when the headset is removed from the charge cradle.
When Range is set to HIGH a user will have up to 300 feet of
range. When Range is set to MEDIUM a user will have up to 150
feet of range. When Range is set to LOW a user will have up to
50 feet of range.
To change the default, go to: Start > Programs > Plantronics >
Plantronics Control Panel > Device Settings – USB adapter.
PC Audio Bandwidth
The Savi W440-M is supplied with wideband audio as the default.
Wideband audio delivers heightened speech clarity and life-like
fidelity. However, wideband audio consumes more battery power
and has more stringent access criteria which reduces the number
of systems that can be deployed in a small area. All PCs support
wideband audio.
To change the PC Audio Bandwidth default in the software, go
to: Start > Programs > Plantronics > Plantronics Control Panel
> Device Settings – USB adapter. You also can toggle between
Plantronics Savi User Guide
14
narrowband and wideband audio by doing a short press (less
than one second) followed by a long press (more than three
seconds) on the USB adapter subscription button while it is in an
idle state. The USB adapter light will flash red for four seconds
upon entering narrowband mode and flash green for four seconds
upon entering wideband mode. When switching between
narrowband and wideband audio, you must re-establish the audio
link for the changes to take effect.
Feature Set Lock
See the Device Settings – Security Tab for more information.
Device Settings – Headset Tab
Options
Feature
Settings
Default
General
Mute Tone
Standard/Low/Off
Off
Ringtone
Sound 1/Sound 2/Sound 3
Sound 2
PC Volume
Standard/Low/Off
Standard
System Tones
Standard/Low/Off
Standard
Second Inbound Call
Ring Continuously/Ring Once/Ignore
Ring Continuously
Device Settings – Advanced Tab
Options
Feature
Settings
Default
Audio Protection
Anti-Startle
Selected/Not selected
Selected
G616*
Selected/Not selected
Not selected
Audio Limiting*
80 dB/85dB/Off
85dB
Hours on Phone Per Day
2/4/6/8
8
Password (required)
Locked/Unlocked
Unlocked
Feature Set Lock
*The Audio and G616 Limiting features are supported in over-the-head mode only and are based on a typical headset and recommended acoustic coupling between the headset
and the ear. Please see Headset setup for optimal wearing position.
Anti-Startle
Anti-startle provides advanced hearing protection against sudden
loud sounds. When Anti-startle is SELECTED, the system
identifies and eliminates sudden loud sounds and rapidly reduces
them to a comfortable level. When Anti-startle is NOT SELECTED,
the headset limits sound levels at 118 dBA to protect your
hearing.
Plantronics Savi User Guide
G616
G616 Acoustic Limiting provides additional hearing protection
against acoustic shock. When G616 Acoustic Limiting is
SELECTED, the system provides additional acoustic shock
protection. Sound levels are limited to 102 dBA as recommended
in the G616:2006 guideline issued by the Australian
Communications Industry Forum (ACIF). When G616 AudioLimiting is NOT SELECTED, the headset limits sound levels at
118 dBA to protect your hearing.
15
Audio Limiting
Audio Limiting provides advanced hearing protection for daily
noise exposure. When Audio-Limiting is SELECTED, the system
monitors and controls sound to ensure audio levels do not
exceed 80 dBA or 85 dBA (whichever is selected) specified by
current and imminent EU legislation. When Audio-Limiting is set
to NOT SELECTED, the headset limits sound levels at 118 dBA to
protect your hearing.
Hours on phone per day
The default is 8 hours. If you change the setting to 2/4/6 hours,
the system will adjust the audio limiting algorithm accordingly.
Feature Set Lock
See the Device Settings – Security Tab for more information.
Device Settings – Security Tab
Options
Feature
Default
Feature Set Lock
Create new password
None
Change password
None
Feature Set Lock
The Plantronics software allows the following device settings to
be locked by the IT staff and prevent end users from changing
them.
•Range
Applications Tab
The Applications Tab displays the status of Plantronics support for
various applications such as softphones and media players. The
status will only show as “enabled and running” for softphones and
media players installed and running.
• Auto Answer
• PC Audio Bandwidth
• Audio Protection (Anti-Startle, G616, Audio Limiting and Hours
on phone per day)
The ability to lock/unlock these settings requires a password. In
order to lock/unlock any setting follow these steps:
1 Create a new password
From the Security screen, create and confirm your new
password and press Set. This will store the password
directly in the device.
2 Lock/unlock a device setting
From the USB Adaptor or Advanced screen, enter your
password in Feature Set Lock, lock/unlock each feature as
desired and click Apply.
Change Your Password
You can always change the old password to a new one in
the Change Password section. You will only able to change a
password if there is a previous password set in the device.
NOTE In case you forget your password, you will need
to call your local Plantronics Technical Support for
assistance.
Plantronics Savi User Guide
16
Preferences Tab
The Preferences Tab allows you to set preferences for the media
player as well as other general settings.
Options
Feature
Settings
Default
Media Player
Action to Media Player
– When a call begins
– When a call ends
Mute/pause/do nothing
Play/do nothing
Pause
Play
General
Launch audio devices control panel
(Provides a shortcut to the Windows Sounds and Audio Devices
control panel.)
Ring Both Headset and PC
Selected/Not selected
Not selected
Microsoft Lync/Office Communicator Dial-tone
Enabled
Selected/Not selected
Selected
Audio Sensing Enabled
Selected/Not selected
Selected
Maintain Headset to PC Link
Selected/Not selected
Not selected
Ring Both Headset and PC
This parameter gives you the option to have the PC ringtone
played on both the headset as well as the PC speaker.
When this parameter is selected, the PC ringtone will be heard on
both the PC speaker as well as the headset.
When this parameter is not selected, the PC ringtone will only be
heard on either the headset or the PC speaker based on how the
PC audio has been set up.
Microsoft Lync/Office Communicator Dial-tone Enabled
If this feature is selected, when a PC radio link is established,
Microsoft Lync/Office Communicator will assume the user is trying
to place a VoIP call and provide a dial tone.
If this feature is not selected, when a PC radio link is established,
Microsoft Lync/Office Communicator will sit idle.
Audio Sensing Enabled
Audio Sensing is a special feature supported by Plantronics
wireless devices that can detect an audio signal at the USB port
and automatically establish a PC radio link between the USB
adapter and wireless headset without the user having to press
the PC call control button. If the parameter “Microsoft Lync/
Office Communicator Dial-tone Enabled” is selected, then every
time a PC radio link is established the Microsoft Lync/Office
Communicator dial tone will be heard. However, the user may
Plantronics Savi User Guide
have pressed the PC call control button to listen to music, etc.,
and does not want to hear the dial-tone. In this case, if the user
selects the “Audio Sensing Enabled” parameter, the radio link will
be established automatically when any PC audio is detected at
the USB port, thus eliminating the need for the user to press the
PC call control button.
Maintain Headset to PC Link
This parameter forces the radio link to the PC to stay active
even after the call has ended. This can eliminate the need to
re-establish the radio link when switching between PC audio
applications.
About Tab
The About Tab provides on-line access to this printable user guide
and also includes Plantronics contact information. The current
version of software and firmware currently running on your system
is also shown here.
17
8 Plantronics Update Manager
All required software for Savi W440-M can be remotely updated
when updates are available. Start Plantronics Update Manager
from Windows Start Programs menu to change settings such as
automatic or manual check for updates.
Check for Updates Automatically
By enabling this check box, you will activate a periodic automatic
check for available software updates.
Check for Updates Now
You can choose to check for available software updates at any
time by clicking on the Check For Updates Now button in Update
Manager. From the Start menu > Programs > Plantronics >
Plantronics Update Manager.
Install Checked Updates
Following an Automatic or Manual Check For Updates, this
field will be populated with any applicable software updates and
the Install Checked Updates will begin installation.
Plantronics Savi User Guide
18
9 Troubleshooting and Common Questions
My headset is unstable.
When you wear the headset, the microphone should rest as close to your cheek as possible
without touching. The microphone can be adjusted inward by the pivoting earpiece to optimise the
position of the headset. See Wearing the headset.
My headset doesn’t work with
Ensure your headset is charged.
Microsoft Lync/Office Communicator. Ensure your headset is subscribed to the USB adapter.
If you press the call control button on your headset, you should hear a Microsoft Lync/Office
Communicator dial tone. If not, you need to ensure the headset is the default device by going to
Microsoft Lync/Office Communicator > Tools > Set Up Audio and Video > Handset or Headset and
choosing your headset as the default.
Disconnect and re-connect the USB adapter. It will be solid red until it subscribes to the headset;
it will be solid green when successfully subscribed to the headset.
Restart your computer.
I hear Microsoft Lync/Office
Communicator audio through my PC
speakers and only want to hear it
through my headset.
Ensure that the headset is the default speaker/speakerphone device. Go to Microsoft Lync/Office
Communicator > Tools > Set Up Audio and Video > Speaker/Microphone or Speakerphone and
select your headset as the default device.
Speaking and/or listening volume is
too low or too high.
Adjust headset listening volume with volume button.
Adjust listening/speaking volumes in the computer’s sound control panel/system preferences.
Adjust listening/speaking volumes in the softphone application.
The sound is distorted or I hear an
echo in the headset.
Reduce speaking and/or listening volume on the computer using your softphone application.
Point microphone towards your chin.
If the distortion is still present, lower the volume on the headset.
Talk time performance is significantly
degraded even after a full recharge.
Plantronics Savi User Guide
The replaceable battery is wearing out. Contact plantronics.com to purchase a new battery. Use
only the battery type supplied by Plantronics.
19
10 Appendix
Left Ear Headset/Savi System Button Functions
This table shows the headset button functions when you are
wearing the headset on the left ear.
Headset function
Type of Press
Tones/Lights
Place, answer, or end calls
Short press call control button
1 mid-tone
Headset flashes white
USB adapter flashes green when in use
Increase volume
Short press volume down
1 tone with pitch increase
Decrease volume
Short press volume up
1 tone with pitch decrease
Flash between calls
While on a call, long press volume up or down (at least 1½ sec.)
1 mid-tone
Mute/unmute headset
While on a call, press the volume/mute button in
USB: Flashes red
Sleep/wake headset
To sleep: While idle, press call control button until flashes white twice
To wake: Press call control until flashes white twice
2 white flashes
Headset subscription mode
1. While idle, double press USB subscription button
2. While idle, press volume down until headset light is solid white
USB: Flashes red and green
Headset: Solid white
Subscribed = USB solid green
Turns headset indicator light ON or OFF
While idle, press volume up until headset flashes white twice
2 white flashes
Low battery warning
Idle: 1 low tone/15 secs
On call: 3 low tones
Out of range
Idle: 1 tone plus 3 low tones
On call: 3 low tones
Back in range
On call: 1 mid-tone
USB function
Headset subscribed, no activity
USB: Solid green
Headset in talk mode
USB: Flashes green
Headset muted
USB: Flashes red
Incoming call
USB: Flashes red and yellow
Headset not subscribed
USB: Solid red
USB adapter subscription
USB: Flashes green and red
USB adapter conference subscription
USB: Flashes green and yellow
Conference call with 1+ guest headsets
USB: Flashes yellow
Toggle between wideband/narrowband
While in idle, short press USB ( <1 sec.) plus long press ( >3 sec.)
Narrowband = USB flashes red 4 sec.
Wideband = USB flashes green 4 sec.
Range setting
While in idle, press USB for three seconds
High range = USB flashes green
Medium range = USB flashes yellow
Low range = USB flashes red
Plantronics Savi User Guide
20
Right Ear Headset/Savi System Button Functions
This table shows the headset button functions when you are
wearing the headset on the right ear.
Headset function
Type of Press
Tones/Lights
Place, answer, or end calls
Short press call control button
1 mid-tone
Headset flashes white
USB adapter flashes green when in use
Increase volume
Short press volume up
1 tone with pitch increase
Decrease volume
Short press volume down
1 tone with pitch decrease
Flash between calls
While on a call, long press volume up or down (at least 1½ sec.)
1 mid-tone
Mute/unmute headset
While on a call, press the volume/mute button in
USB: Flashes red
Sleep/wake headset
To sleep: While idle, press call control button until flashes white twice
To wake: Press call control until flashes white twice
2 white flashes
Headset subscription mode
1. While idle, double press USB subscription button
2. While idle, press volume down until headset light is solid white
USB: Flashes red and green
Headset: Solid white
Subscribed = USB solid green
Turns headset indicator light ON or OFF
While idle, press volume down until headset flashes white twice
2 white flashes
Low battery warning
Idle: 1 low tone/15 secs
On call: 3 low tones
Out of range
Idle: 1 tone plus 3 low tones
On call: 3 low tones
Back in range
On call: 1 mid-tone
USB function
Headset subscribed, no actiivity
USB: Solid green
Headset in talk mode
USB: Flashes green
Headset muted
USB: Flashes red
Incoming call
USB: Flashes red and yellow
Headset not subscribed
USB: Solid red
USB adapter subscription
USB: Flashes green and red
USB adapter conference subscription
USB: Flashes green and yellow
Conference call with 1+ guest headsets
USB: Flashes yellow
Toggle between wideband/narrowband
While in idle, short press USB ( <1 sec.) plus long press ( >3 sec.)
Narrowband = USB flashes red 4 sec.
Wideband = USB flashes green 4 sec.
Range setting
While in idle, press USB for three seconds
High range = USB flashes green
Medium range = USB flashes yellow
Low range = USB flashes red
Plantronics Savi User Guide
21
Plantronics, Inc.
Plantronics BV
345 Encinal Street
South Point Building C
Santa Cruz, CA 95060
Scorpius 140
United States
2132 LR Hoofddorp
plantronics.com
Netherlands
EEE Yönetmeliğine Uygundur
For product support contact us at plantronics.com/support
© 2011 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Savi, W440-M, and Sound Innovation are trademarks or registered
trademarks of Plantronics, Inc. Microsoft, Windows and Vista are trademarks or registered trademarks of Microsoft Corporation. Skype is a
trademark of Skype Limited or other related Skype companies.
Patents US 5,210,791; 7,633,963 and Patents Pending
83628-02 (07.13)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement