pE 1000 Brochure.qxd
pulseEKKO 1000
®
pulseEKKO ® 1000
The latest advancements in digital
ground penetrating radar technology
User-friendly and cost-effective -- this member of the
pulseEKKO ® family continues on the path of excellence
in Sensors & Software's digital ground penetrating radar
(GPR) technology.
With optimal performance in high resolution
applications, pulseEKKO® 1000 is perfect for all your
GPR needs. High fidelity, fully digital timing control and
digital data acquisition throughout make the
pulseEKKO ® 1000 unmatched for geotechnical and
non-destructive testing (NDT) demands in GPR.
Use long cables for easy access
to confined areas
Use the backpack and cart for single operator surveys
Use the odometer wheel and cart for road surveys
Features
• bistatic antennas
• CMP acquisition
• computer control
• digital acquisition at antenna
• ergonomic antenna carts
• interchangeable antennas
• lightweight, modular, compact
• odometer control
• remote triggering
• signal stacking
The software configuration is designed so that even a novice can easily access
and use the system in the field. The system is compatible with MS-DOS* and
Windows* and is open-ended to allow for use with the rapid technology
advancements of today.
wiggle-trace display of buried pipes
Processing
• AGC, SEC & USER gains
• FFT filtering & trace attributes
• modeling & migration
colour display of voids
• seismic processing software
• temporal & spatial filtering
• topographic compensation
• wiggle trace & color display
grey-scale display of rebar
Applications
Find rebar & conduit
location before you drill
• archaeology
• concrete inspection
• forensics
• geology
• NDT
Locate pipes under pavement
• pipe & cable location
• tomography imaging
• tunnel wall & pipe liner inspection
• unexploded ordnance (UXO) detection
Find voids in tunnels
pulseEKKO ® 1000 Technical Specifications
Antennas (Shielded)
110 MHz
225 MHz
450 MHz
900 MHz
1200 MHz
92
40
23
23
18
x
x
x
x
x
46
23
16
16
12
x
x
x
x
x
16 cm
7 cm
6 cm
6 cm
12 cm
9.0
1.0
0.7
0.7
0.5
kg
kg
kg
kg
kg
Console
control & data output
power requirement
size
weight
RS232 serial port (optional parallel)
2.1 [email protected] dc
25 x 16 x 16 cm
2.8 kg
Control & Display
computer
digital storage
hard copy output
XT to Pentium to P6 and beyond
hard drive & any PC medium
PC compatible printers
GPR Parameters
maximum system performance
programmable sampling interval
equivalent time sampling rate to
programmable stacking
programmable time window
162dB
10 ps-20000 ps in 2 ps steps
100 GHz
1-2048 stacks
1 ns-32767 ns
Receiver Electronics
output
lsb
size
weight
16 bit digital
1.5 mV
23 x 16 x 5 cm
1.5 kg
Transmitter Electronics
output
size
weight
200V
23 x 16 x 5 cm
1.7 kg
* trademark of Microsoft
pulseEKKO is a registered trademark of Sensors & Software Inc.
* trademark of Microsoft
s u b s u r f a c e
Sensors & Software Inc.
1040 Stacey Court
Mississauga, ON L4W 2X8 CANADA
i m a g i n g
Tel: (905) 624-8909
Fax: (905) 624-9365
s o l u t i o n s
Email: [email protected]
Website: www.sensoft.ca
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement