TME-M006SE 5.6-inch LCD Color Monitor
TME-M006SE
(RCS PONTOISE B 338 101 280)
Sankei Kikaku Co., Ltd.
1-13-38, Hinodai,
Hino, Tokyo, Japan
R
68P91508W25-O
Printed in Japan (S)
5.6-inch LCD Color Monitor
English
■ OWNER'S MANUAL
• Please read this manual to maximize your enjoyment of the outstanding
performance and feature capabilities of the equipment, then retain the
manual for future reference.
■
•
Points to Observe for Safe Usage
•
•
Read this manual carefully before starting operation and use this system
safely. We cannot be responsible for problems resulting from failure to
observe the instructions in this manual.
This manual uses various pictorial displays to show how to use this
product safely and to avoid harm to yourself and others and damage to
your property. Here is what these pictorial displays mean. Understanding
them is important for reading this manual.
•
Meaning of displays
POWER
LCD COLOR MONITOR TME-M006SE
Warning
This label is intended to alert the user to the presence of
important operating instructions.
Failure to heed the instructions will result in severe
injury or death.
Caution
This label is intended to alert the user to the presence of
important operating instructions.
Failure to heed the instructions can result in injury or
material damage.
Warning
R
SERIAL NUMBER /
INSTALLATION DATE /
INSTALLATION TECHNICIAN /
PLACE OF PURCHASE /
ALPINE ELECTRONICS, INC.
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141, Japan
Tel.: (03) 3494-1101
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Tel.: (03) 769-0000
ALPINE ELECTRONICS GMBH
Brandenburger Strasse 2-6 D-40880 Ratingen,
Germany
Tel.: 02102-45 50
ALPINE ITALIA S.p.A.
Via C. Colombo 8, 20090 Trezzano Sul
Naviglio MI, Italy
Tel.: 02-48 40 16 24
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue De La Belle Etoile, Z.I. Paris Nord II
B.P. 50016 F-95945, Roissy,
Charles de Gaulle Cedex, France
Tel.: 01-48 63 89 89
ALPINE ELECTRONICS OF U. K., LTD.
13 Tanners Drive, Blakelands,
Milton Keynes MK14 5BU, U.K.
Tel.: 01908-61 15 56
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal De Gamarra 36, Pabellón 32
01013 Vitoria (Alava) - Apdo. 133, Spain
Tel.: 34-45-283588
DO NOT DISASSEMBLE OR ALTER
Attempts to disassemble or alter may lead to accident, fire or electric shock.
KEEP SMALL ARTICLES OUT OF THE REACH OF CHILDREN
Store small articles (batteries, screws etc.) in places not accessible to children. If swallowed, consult a physician immediately.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND
Use only in cars with a 12 volts negative (–) ground. (Check with your dealer
if you are not sure.) Failure to do so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE
BATTERY TERMINAL
Before doing any electrical wiring, disconnect the cable from the negative (–)
terminal of the battery. Failure to do so may result in electric shock or injury
due to electrical shorts.
KEEP ELECTRICAL CABLES TOGETHER TO AVOID OPERATING HAZARDS
Arrange wiring and cables in compliance with the installation manual to
prevent obstructions when driving. Cables or wiring that obstructs or hangs
up on places such as the steering wheel, gear lever, brake pedals can be
extremely hazardous.
DO NOT CUT AWAY THE WIRE SHEATH AND USE POWER TO OTHER
EQUIPMENT
Never cut away the cable shielding to use power to another piece of equipment. Doing so will exceed the current carrying capacity of the wire and result
in fire or electric shock.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE
OPERATION
Do not install in locations which might create hazards for the vehicle occupants or hinder vehicle operation (such as the steering wheel or gear shift) by
obstructing forward vision or hampering movement etc.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES
When drilling holes in the chassis for installation, take precautions so as not
to contact, damage or obstruct pipes, tanks or electrical wiring. Failure to take
such precautions may result in fire.
DO NOT USE NUTS OR BOLTS IN THE BRAKE SYSTEM WHEN MAKING
INSTALLATION OR GROUND CONNECTIONS
Never use safety-related parts such as bolts or nuts in the steering or brake
systems or tanks to make wiring installations or ground connections. Using
such parts could disable control of the vehicle and cause fire etc.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS
When problems appear, stop using the system immediately and contact the
dealer from whom you purchased the equipment. Some problems which may
warrant immediate attention include a lack of sound, noxious odors or smoke
being emitted from the unit, or foreign objects dropped inside the unit.
DO NOT OPERATE THE REMOTE CONTROL WHILE DRIVING
Do not change settings while driving. If operation requiring a prolonged view
of the display is required, stop the vehicle in a safe location before attempting
operation.
DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR
BAG
Ensure that the location chosen for the monitor does not interfere with the
operation of the passenger seat air bag. This will prevent the triggered air
bag from launching the display towards passengers, possible causing injury.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS
The wiring and installation of this unit requires special technical skill and
experience. To ensure safety, always contact the dealer where you purchased this unit to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY
Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the
unit in place as parts that come loose can create hazards.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST
Avoid installing the unit in locations with high incidence of moisture or dust.
Moisture or dust that penetrates into this unit may cause smoke or fire.
MAKE THE CORRECT CONNECTIONS
Failure to make the correct connections can cause fire or accident to occur.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED
Route the cables and wiring so as not be crimped by moving parts like seat
rail or make contact with sharp or pointed spots which might damage the
wiring.
DO NOT RAISE THE VOLUME EXCESSIVELY
Keep the volume at a level where you can still hear outside noises while
driving. Driving while unable to hear outside sounds could cause an accident.
DO NOT USE THIS EQUIPMENT OUTSIDE THE VEHICLE
Do not use this equipment for purposes other than those listed for a vehicle.
Failure to do so may result in an electric shock or an injury.
•
•
•
English
Installation
1
Installing the Monitor
2
Mounting Hole
Mounting Bracket
Caution:
If your vehicle has passenger side air bags, make sure the monitor is not
mounted in an area where the air bag will be deployed.
Monitor
Monitor Mounting Screw
3
Dashboard
Remove the monitor from the mounting bracket.
Mounting Screws (Included)
★
Double Stick Tape
4
5
Mounting Hole
Monitor
Monitor Connector Terminal
Monitor Mounting Screw
Monitor Connector
Cord Clamp
6
Height Adjustment Screw
Angle Adjustment Screw
1 Assemble the mounting bracket and temporarily mount the monitor.
Note:
Always use the TV mounting bracket supplied.
1
2 Carefully choose the installation location.
Select a location that is as flat as possible. Temporarily mount the unit there
using double-stick tape.
Notes:
• Mounting hints
• Top of the monitor should not exceed the top of the dash-board when
viewed from the drivers seat.
• The mounting surface should be strong and stable.
• Position the monitor and viewing angle so it can be easily seen.
• Do not install this unit in a location that will obstruct the operation of any
safety device (such as air bags or passive restraint systems).
• If the surface of the dash board is finished with other than plastic such as
leather, wood, or cloth, damage may occur when the mounting bracket is
removed.
2
3 Peel the protective paper from the double stick tape on the mounting bracket.
Secure the bracket at the installation location.
Clean the installation location with the cleaner supplied.
Notes:
• Warm the installation location with a dryer before putting the mounting
bracket into place.
• Do not apply force or moisture for 24 hours after installation.
• If the bracket is not attached securely, mount the bracket with the screws
provided.
• ★: If the mounting surface is curved, reform the base of the mounting
bracket to match its shape.
3
4 Connect the monitor.
Insert the connector into the back of the monitor until a click is heard.
4
5 Mount the monitor on the mounting bracket.
Align the threaded hole on the bottom of the monitor to the mounting thumbscrew. Secure the monitor by rotating the thumbscrew.
Use the cord clamper to dress the cord to prevent possible entanglements.
5
6 Adjust the height and angle of the monitor for the best viewing angle.
Determine the height and angle. Tighten the height adjusting screw and the
angle adjusting screw securely to fix the monitor.
6
•
•
•
•
•
•
•
•
•
•
Operations
Monitor
Screen Display ON/OFF
ME
VOLU
VOLUME Control/
1 Set the Main POWER switch to the STAND-BY position. The main power
lamp will illuminate.
1
DIMMER Switch/
2 When you have finished using the monitor, set the Main POWER switch to the
OFF position. The main power lamp will turn off.
Notes:
• When you turn off the car's ignition switch, make sure the monitor's power
is also turned off. If the monitor is left in the STAND-BY position, it will
slowly drain the car's battery.
• On Screen Display
The operation contents will be displayed for 3 seconds.
2
ER
MM
DI HIGH
O
AUDI
Main POWER Switch/
ER
POWDBY
STAN OFF
POWE
R
Main POWER Lamp/
MOBIL
E CO
LO
R MO
NIT
OR
TME-
M006S
Screen Display ON/OFF
1
1
POWER
1 Rotate the VOLUME control UP to increase the volume and DOWN to decrease.
VOLUME
Changing the Brightness of the Back Light
(Dimmer Function)
POWER
1
1
Changing the Brightness of the Back Light (Dimmer Function)
POWER
STANDBY
OFF
•
Adjusting the Volume
Adjusting the Volume
STANDBY
OFF
2
Remote Control Sensor/
E
•
DIMMER
HIGH
AUTO
1 Setting the DIMMER switch.
HIGH : Maintains bright backlighting.
AUTO : Adjusts the brightness automatically, depending upon the vehicle's
driving lights.
Headlights off = brighter
Headlights on = darker
1
Notes:
• Contents displayed on the screen may remain on the screen temporarily; this
is a residual image effect peculiar to the LCD and not due to failure.
• The screen may lose contrast when used in cold temperature conditions.
•
•
Connections
TUE-T011 (TV Tuner) (Sold Separately)
Connection with TV Tuner (TUE-T011) (Sold Separately)
Monitor
•
RGB INPUT
DISPLAY OUTPUT
TV TUNER/DIVERSITY UNIT
POWER SUPPLY
The unit can be operated with the remote controller attached with the TV
Tuner. For details, refer to the Owner's Manual of the TV Tuner (TUE-T011).
•
TUE-T011
POWER
COLOR CONTROL
ON
OFF
VIDEO OUTPUT
VIDEO INPUT
ANTENNA INPUT
1
2
3
4
VIDEO
L
AUDIO
LCD COLOR MONITOR TME-M006SE
NAVIGATION INPUT
R
VIDEO
(MONO)
L AUDIO
R
In Case of Difficulty
Specifications
MONITOR
Screen Size .................................................................................................................................. 6-type
Display System ............................................ Low reflection rear projection type TN liquid crystal panel
Drive System ........................................................................ Active matrix drive, normally white display
Number of Picture Elements ........................................................... 228, 480 pcs. (H:960 x V:238 dots)
Light Source ......................................... Internal optical system (U-type cold cathode fluorescent tube)
Luminance Selector ................................................................ 2-step (luminance auto-selector built-in)
Speaker ......................................................................................................... φ 36mm dynamic speaker
Volume Control ............................................................................................................... Rotary volume
Dimensions (W x H x D) ............................................................................................ 171 x 127 x 33mm
Weight ............................................................................................................................................ 510g
If you encounter a problem, please review the items in the following check list.
This guide will help you isolate the problem if the unit is at fault. Otherwise, make
sure the rest of your system is properly connected or consult your authorized
Alpine dealer.
Symptom
No function
or display.
Unclear
picture
display.
No picture
display.
φ
Cause
Car's ignition is off.
Incorrect connections.
Vehicle's battery is weak.
Monitors power is Off.
Fluorescent tube is exhausted.
Solution
Turn the ignition on.
Check connection and remedy.
Check the voltage of vehicle's
battery.
Turn the monitor's power on.
Replace the fluorescent tube.★
Adjust the monitor's brightness in
the navigation system's set-up
mode.
Navigation system's mode set
Switch to the correct mode using
incorrectly.
the navigation system's set-up
remote control.
Protective circuit is on because of Wait until the temperature inside
high temperature.
the vehicle comes down to the
operating temperature range
(45°C).
Incorrect or open connection with Check the connection and remthe Monitor.
edy.
Poor picture Brightness control is not set to the Check the dimmer switch on the
brightness. proper positions.
side of the monitor or adjust the
brightness in the navigation
system's set-up mode.
Spots or
Caused by neon signs, highChange the location of your
dotted lines/ voltage power lines, CB transmit- vehicle.
stripes
ter, other vehicle's spark plugs,
appear.
etc.
★
Brightness control is set for
minimum brightness control.
★ The fluorescent tube replacement is not free of charge even within the warranty period, for the tube is an article of consumption.
★
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement