null  null
NEW!
756 RD (7” round)
d))
s
Warning Lights
Pgs. 1-2
2
756 R
RD
(7” round)
Backup
Pgs. 9-10
R4 RD (4” round)
Backup
Pgs. 9-10
756 (7” round)
& R4 (4” round) RD
Signal Lights
Pgs. 3-4 & 5-6
Stepwell/Curb
Lights
Pgs. 29-30
4500
LED Beacon
Pg. 23
O6 Mid-Turn
Marker Guard
Pg. 11
Turn Signal
Marker Light
Pg. 12
Beacons
3000 Strobe, 5000 Economy Strobe .................................... 23-24
4500 LED ................................................................................. 23
Electronic Products
Bus Light Monitor ...................................................................
Headlight Flasher ....................................................................
Ignition Security Switch (I.S.S.) ..............................................
LED Load Module....................................................................
26
26
25
25
I.D. Bar
120 Premium Series I.D. Bar ................................................... 15
Interior Lights (White Illumination)
Dome/Cargo Lights & Strip Lights ........................................ 27-28
License Plate Lights
4” Round STT Combination Lights ......................................... 13
Compact License Plate Light .................................................. 14
Marker/Clearance Lights
120
140
150
210
200
350
390
520
RD Series ........................................................................ 15-16
Series ............................................................................. 15-16
Series ............................................................................. 17-18
Series ............................................................................... 21
& 250 Series (2” & 2.5” rounds) ..................................... 21-22
Series ............................................................................. 17-18
Series ............................................................................. 19-20
Premium & RD Series (5” oval) ...................................... 19-20
Signal Lights
756 Premium & RD Series (7” round) ..................................... 3-4
756 Rear Turn w/ Arrow (7” round) ........................................ 3-4
R4 Premium & RD Series (4” round) ....................................... 5-6
O6 Series Premium (6” oval) .................................................. 7-8
O6 Series Mid-Turn Marker (6” oval) ...................................... 11
Turn Signal Marker .................................................................. 12
Stepwell Lights
Curb/Entry Light (4” oval) ....................................................... 29
Stepwell Light (4.5” round) ..................................................... 30
Warning Lights
756 Premium & RD Series (7” rounds) ....................................... 1-2
Professional LED Lighting Products
O6 Series (6” oval) ................................................................... 9
756 Premium & RD Series (7” Rounds) ................................. 9-10
R4 Premium & RD Series (4” Rounds) ................................... 9-10
2011 bus/Comm. Veh. Catalog
Backup/Reverse Lights
Amber Products - Table of Contents
Table of Contents
Our 756 Series are an industry leading 8-way LED Warning Lighting System
for School Buses. LED lighting offers your fleet reliable, unmatched light output, greater efficiency with a lower amp draw, reduced vehicle downtime &
reduced maintenance costs. Benefit with years trouble free service & greater safety
features. Lights feature smartly engineered optics to increase brightness & off angle
visibility. Increased conspicuity on the road offers an enhanced safety environment for
school bus drivers, precious cargo & other motorists sharing the road.
Benefits
•
•
•
•
•
•
•
•
Leading 8-way warning light system
Advanced optical technology exceeds all FMVSS & SAE requirements
Specially engineered reflective optics to boost light output & brightness
Sonic welded, waterproof construction
Reinforced stainless steel screw bosses – tested to 70 inch lbs. of torque
Lens w/ UV inhibitor prevents sun fade
Weatherproof seal w/ adhered neoprene gasket
Includes 7” wire length
756 Premium Series
• Greater number of LEDs (our brightest light)
756 RD Series
• Budget friendly, lower-priced LED warning light solution
Bus Installations & Product Images
Reinforced Metal
Screw Bosses
1
LED Warning Lights
7” Round 756 Premium & RD Series
756PREMIUM SERIES
7” Round Warning Light
School Bus Certified:
Color Lens #E756IEBØ(x)
(x)= A R
NEW!
756RD SERIES
7” Round Warning Light
School Bus Certified:
Color Lens #E756IEBØ(x)-RD
(x)= A R
Tech Specs
Flash Patterns:
756 Premium
756 RD
2 Modes: Steady Burn &
Strobing @ 10.4 f.p.s.
2 Modes: Steady Burn &
Strobing @ 10.4 f.p.s.
10 - 16 Vdc
Input Voltage:
Current
Consumption:
LEDs:
Mounting:
Dimensions:
@ 12.8 Vdc
Steady Burn: 2 - 3 amps
Strobing: 1.4 - 1.8 amps
@ 12.8 Vdc
Steady Burn: 1 - 1.6 amps
Strobing: 0.6 - 0.9 amps
124 Gen2 LEDs
Red - 56 Gen2 LEDs
Yellow - 96 Gen2 LEDs
Surface Mount on 6.25” (159 mm) centers
7” (178 mm) diameter x 1.875” (48 mm) depth
2
(Standard)
(Standard)
(Reflex Reflector)
(Reflex Reflector)
7” Round LED Signal lights for buses & other
large vehicle fleets offer superior lens design to maximize output & brightness even
in the most harsh weather conditions. LED
lighting offers many benefits; low amp draw,
lower maintenance (no shattered or burned
out bulbs to replace), reduced vehicle downtime & increased safety w/ heightened
visibility.
756PREMIUM
7” Round Red Stop/Turn/Tail:
Standard #ECV7561STT
Reflex Reflector, 10-30v #ECV7562STT-WP
7” Round Yellow Rear Turn:
Standard #ECV7561TY
Reflex Reflector, 10-30v #ECV7562TY-WP
7” Round Yellow Front/Park/Turn:
Standard #ECV7561FPTY
Features
• Advanced optical technology exceeds all
FMVSS & SAE requirements
• Specially engineered lens to boost light output
& brightness
• Sonic welded, waterproof construction
• Reinforced stainless steel screw bosses – tested
to 70 inch lbs. of torque
• Lens w/ UV inhibitor prevents sun fade
• Weatherproof seal w/ adhered neoprene gasket
• Includes 7” wire length
756 Premium
• Greater number of LEDs (our brightest light)
756 Premium Rear Turn w/ Arrow
• Greater number of LEDs (our brightest light)
• Distinct arrow for clear turn signal indication
756 RD Series
• Budget friendly, lower-priced LED solution
3
Bus Installations & Product Images
LED signal Lights
756PREMIUM
Premium
Stop/Tail/Turn
Premium
Turn
Rear Turn
w// Arrow
A
Input Voltage:
10 - 16 Vdc
ECV7562STT: 10 - 30 Vdc
10 - 16 Vdc
ECV7562TY: 10 - 30 Vdc
10 - 16 Vdc
Current
Consumption:
@ 12.8 Vdc
Stop/Turn: 0.20 amps
Tail: 0.01 amps
@ 12.8 Vdc
0.20 amps
@ 12.8 Vdc
0.32 amps
Tech Specs
48 Gen2
LEDs:
7” Round Sur
Surface Mounts
7” Round Rear Turn w/ Arrow:
A
Yellow #ECV7561TYA
32 Gen2
Surface Mount on 6.22” (158 mm) centers
Mounting:
7” (178 mm) diameter x 1.875” (48 mm) depth
Dimensions:
NEW!
756RD SERIES
7” Stop/Turn/Tail:
Red #ECV7561STT-RD
7” Rear Turn:
Yellow #ECV7561TY-RD
Tech Specs
Input Voltage:
Current
Consumption:
LEDs:
Mounting:
Dimensions:
RD
Stop/Tail/Turn
/Tail/Turn
RD
D
Rear Turn
10 - 16 Vdc
@ 12.8 Vdc
Stop/Turn: 0.20 amps
Tail: 0.01 amps
@ 12.8 Vdc
0.20 amps
22 Gen3
Surface Mount on 6.22” (158 mm) centers
7” (178 mm) diameter
x 1.875” (48 mm) depth
7” (178 mm) diameter
x 1.875” (48 mm) depth
4
R4PREMIUM
4” Round Red Stop/Tail/Turn*:
Light Only #ECVR41STT
Light w/ Grommet #ECVR42STT
4” Round Yellow Turn*:
Light Only #ECVR41TY
Light w/ Grommet #ECVR42TY
Grommet
Tech
Specs
R4 Premium STT
10 - 16 Vdc
Input Voltage:
Current
Consumption:
@ 12.8 Vdc
Stop/Turn: 0.19 amps
Tail: 0.015 amps
@ 12.8 Vdc
Tail: 0.03 amps
Turn: 0.28 amps
32 Gen2
40 Gen2
LEDs:
Mounting:
Dimensions:
R4 Premium TY
Recess Mount into standard 4.5” round cut outs
w/ Black Rubber Grommet or Chrome Dress Ring
4” (102 mm) diameter x 1.25” (32 mm) depth
4” Round LED Signal lights are great for buses
& other large vehicles. LED lighting offers many
benefits; low amp draw, lower maintenance,
reduced vehicle downtime & increased safety
w/ heightened visibility. Lights fit into standard 4”
round body cut outs. Recess mount style w/ optional Rubber Grommet or Chrome Dress Ring.
*Premium & RD Lights have attached
AMP Superseal 1.5 Series Connector
& include mating harness
Benefits
• Advanced optical technology exceeds all
FMVSS & SAE requirements
• Specially engineered lens to boost light output
& brightness
• Lens w/ UV inhibitor prevents sun fade
• Light includes 8” wire length w/ attached AMP
Superseal 1.5 Series Connector
R4 Premium
• Greater number of LEDs (our brightest light)
R4 RD Series
• Budget friendly, lower-priced LED solution
5
Bus & Truck Installations
LED signal Lights
4” Round Recess Mounts
NEW!
R4RD SESERIES
4” Round Red Stop/Tail/Turn*:
Light Only #ECVR41STT-RD
w/ Grommet #ECVR42STT-RD
Grommet
4” Round Yellow Turn:
Light Only #ECVR41TY-RD
w/ Grommet #ECVR42TY-RD
Tech Specs
R4 RD STT
Input Voltage:
Current
Consumption:
LEDs:
Mounting:
Dimensions:
R4 RD TY
10 - 16 Vdc
@ 12.8 Vdc
Stop/Turn: 0.012 amps
Tail: 0.17 amps
@ 12.8 Vdc
Tail: 0.025 amps
Turn: 0.25 amps
13 Gen2
21 Gen2
Recess Mount into standard 4.5” (114 mm) cut outs
w/ Black Rubber Grommet or Chrome Dress Ring
4” (102 mm) diameter x 1.25” (32 mm) depth
R4ACCESSORIES:
Chrome Dress Ring
Rubber Grommet
AMP Superseal 3-wire Pigtail
AMP Superseal 2-wire Pigtail
Mating
AMP Superseal Connector
Mati
ing Harness,
H
w/ ASCI adaptor
#ECVR4CHRM
#ECVR4GRMT
#ECVRØ3PGTL
#ECVRØ2PGTL
#ECVPGASCI
Chrome Dress Ring
Rubber Grommet
6
O6PREMIUM
6” Oval Red Stop/Tail/Turn:
Light Only #ECVO61STT
Light w/ Grommet #ECVO62STT
6” Oval Yellow Park/Turn:
Light Only #ECVO61TY
Light w/ Grommet #ECVO62TY
Grommet
6” Oval LED Signal lights are great for
or buses
s &
other large vehicles. LED lighting offers
many
ff
any
benefits; low amp draw, lower maintenance,
ce,
reduced vehicle downtime & increased safety
with heightened visibility. Lights fit into standard
6” oval body cut outs. Recess mount style with
optional Rubber Grommet or Chrome Dress Ring.
*Premium & LD lights have attached
AMP Superseal 1.5 Series Connector
& include mating harness
Benefits
• Advanced optical technology exceeds all
FMVSS & SAE requirements
• Specially engineered lens to boost light output
& brightness
• Sonic welded, waterproof construction
• Lens w/ UV inhibitor prevents sun fade
• Light includes 8” wire length w/ attached AMP
Superseal 1.5 Series Connector
O6 Premium
• Greater number of LEDs (our brightest light)
O6 LD Series
• Budget friendly, lower-priced LED solution
• Features two unique side mounted LEDs to
boost off-angle visibility
7
Bus & Truck Installations
O6LD SERIES
6” Oval Recess Mounts
LED signal Lights
6” Oval Red Stop/Tail/Turn*:
Light Only #ECVO61STT-LD
w/ Grommet #ECVO62STT-LD
6” Oval Yellow Park/Turn*:
Light Only #ECVO61TY-LD
w/ Grommet #ECVO62TY-LD
Unique Side Mounted LEDs on
each end boost side visibility
O6ACCESSORIES:
Chrome Dress Ring
Rubber Grommet
AMP Superseal 3-wire Pigtail
AMP Superseal 2-wire Pigtail
Mating Harness, AMP Superseal Connector
w/ ASCI adaptor
Tech Specs
#ECVO6CHRM
#ECVO6GRMT
#ECVRO3PGTL
#ECVRO2PGTL
#ECVPGASCI
O6 Premium
LEDs:
Mounting:
Dimensions:
O6 LD Series
10 - 16 Vdc
Input Voltage:
Current
Consumption:
Chrome Dress Ring
STT @ 12.8 Vdc
Stop/Turn: 0.21 amps
Tail: 0.015 amps
TY @ 12.8 Vdc
Tail: 0.032 amps / Turn: 0.31 amps
STT @ 12.8 Vdc
Stop/Turn: 0.16 amps
Tail: 0.023 amps
TY @ 12.8 Vdc
Tail: 0.043 amps / Turn: 0.16 amps
Red STT: 34 Gen2
Yellow Park/Turn: 42 Gen2
14 Gen2
Recess Mount into standard 6” oval cut outs
w/ Rubber Grommet or Chrome Dress Ring
6.375” (162 mm) length x 2.19” (56 mm) height x 1.5” (38 mm) depth
8
Grommet
O6PREMIUM
6” Oval Backup/Reverse
/Reverse Light:
Light Only #ECVO61B2W
w/ Grommet #ECVO62B2W
Benefits
•
•
•
•
Advanced optical technology exceeds all FMVSS & SAE requirements
Specially engineered reflective optics to boost light output & brightness
Sonic welded, waterproof construction
Lens w/ UV inhibitor prevents sun fade
756 Premium Series
756 RD Series
• Greater number of LEDs & output
(our brightest light)
• Reinforced stainless steel screw bosses –
tested to 70 inch lbs. of torque
• Weatherproof seal w/ adhered neoprene gasket
• Includes mounting screws w/ 7” wire length
• Budget friendly, lower-priced LED solution
• Single, bright-white, Gen3 LED offers
unmatched output & brightness
• Reinforced stainless steel screw bosses –
tested to 70 inch lbs. of torque
• Weatherproof seal w/ adhered neoprene
gasket
• Includes mounting screws w/ 7” wire length
R4 RD Series
R4 Premium Series
• Budget friendly, lower-priced LED solution
• Single, bright-white, Gen3 LED offers
unmatched output & brightness
• Light includes 8” wire length w/ attached
AMP Superseal 1.5 Series Connector
• Greater number of LEDs (our brightest light)
• Light includes 8” wire length w/ attached
AMP Superseal 1.5 Series Connector
O6 Premium Series
• Greater number of LEDs (our brightest light)
• Light includes 8” wire length w/ attached AMP Superseal 1.5 Series Connector
Tech Specs
756 & R4
Premium Series
LEDs:
Mounting:
9
Dimensions:
O6 Premium Series
10 - 16 Vdc
Input Voltage
Current
Consumption:
756 & R4
RD Series
@ 12.8 Vdc
4”: 0.20 - 0.70 amps
7”: 0.60 - 0.85 amps
@ 12.8 Vdc
4”: 0.20 amps
7”: 0.20 amps
@ 12.8 Vdc
0.50 - 0.70 amps
4”: 24 Gen2
7”: 28 Gen2
4”: 1 Gen3
7”: 1 Gen3
26 Gen2
4”: Recess Mount into standard 4.5” (114 mm) cut
outs w/ Black Rubber Grommet or Chrome Dress Ring
7”: Surface Mount on 6.22” (158 mm) centers
Recess Mount into standard 6” oval cut outs
w/ Rubber Grommet or Chrome Dress Ring
4”: 4” (102 mm) diameter x 1.25” (32 mm) depth
7”: 7” (178 mm) diameter x 1.875” (48 mm) depth
6.375” (162 mm) length x 2.19” (56 mm) height
x 1.5” (38 mm) depth
R4PREMIUM
6” Oval Premium| 4” & 7” Rounds, Premium & RD
LED Backup/reverse lights
4” Round Backup/Reverse:
Light Only #ECVR41B2W
Light w/ Grommet #ECVR42B2W
756PREMIUM
7” Round Backup/Reverse Light:
#ECV7561B2W
NEW!
756RD SERIES
7” Round Single Diode
Backup Light:
#ECV7561B3W
Grommet
NEW!
R4RD SERIES
4” Round Single Diode Backup Light:
Light Only #ECVR41B3W
w/ Grommet #ECVR42B3W
10
Grommet
O6MID-TURN MARKER
SAE Certified:
Light Only #ECVO61MTY-T
w/ Grommet #ECVO62MTY-T
NEW!
O6ACCESSORIES:
Rubber Grommet #ECVRO6GRMT
Metal Guard #ECVRO61BMG
Metal Guard
Benefits
• Weatherproof seal w/ adhered neoprene gasket
• Surface Mount design may be mounted directly to the body of the vehicle or
w/ optional black Rubber Grommet or black Metal Guard
• Advanced optical technology exceeds all FMVSS & SAE requirements
• Specially engineered reflective optics to boost light output & brightness
• Sonic welded, waterproof construction
• Lens w/ UV inhibitor prevents sun fade
• Light includes 8” wire length w/ attached AMP Superseal 1.5 Series Connector
Tech Specs
SAE Certified Mid-Turn Marker
Input Voltage:
10 - 16 Vdc
Current
Consumption:
@ 12.8 Vdc
Marker: 0.11 amps, Turn: 0.34 amps, Marker & Turn: 0.45 amps
LEDs:
Mounting:
Dimensions:
11
Turn Signal: 3 Gen3 LEDs, Marker: 5 Gen2 LEDs
Surface Mount on 4.79” (122 mm) centers
or Recess Mount w/ Rubber Grommet
6.47” (164 mm) length x 2.2” height x (56mm) x 1.52” (39 mm) depth
#ECV4FPTMA:
Amber Face Illuminated
LED signal Lights
Combination Turn Signal Marker Lights
TurnSIGNAL MARKER LIGHT
Dual Face, Two Stud Mount:
Universal Mount, Amber/Amber #ECV4FPTMA
Curb Side Mount, Amber/Red #ECV4FPTMK
Road Side Mount, Amber/Red #ECV5FPTMK
Side Reflector/Marker
NEW!
#ECV4FPTMK:
#ECV5FPTMK:
Red Face Illuminated
Benefits
•
•
•
•
•
•
•
•
•
Multi-function design offers park, tail
ail & turn functions
Built-in side reflector/marker on each side of light has 3 bright LEDs
Universal, Curb side or Road side models available
Vertical surface mount light has a two stud mount
Advanced optical technology exceeds all FMVSS & SAE requirements
Specially engineered reflective optics to boost light output & brightness
Sonic welded, waterproof construction
Lens w/ UV inhibitor prevents sun fade
Includes mounting hardware w/ 8” three-wire lead for installation
Tech Specs
Turn Signal Marker Light
Input Voltage:
10 - 16 Vdc
Current
Consumption:
@ 12.8 Vdc
Turn: 0.65 amps, Tail: 0.12 amps
LEDs:
Mounting:
Dimensions:
Amber Face: 18 Gen2 Super LEDs, Red Face: 9 Gen2 Super LEDs
Side Marker: 3 Gen2 Super LEDs
Two Stud Surface Mount on 2.02” (51 mm) centers
4.72” (120 mm) height x 4.53” (115 mm) width x 2.44” (62 mm) depth
12
PREMIUMCOMBO LICENSE PLATE LIGHT
w/ 4” Round Red Stop/Tail/Turn Light:
#ECVR41STTELP
RDCOMBO LICENSE PLATE LIGHT
Built-in License Plate Light
w/ 4” Round Red Stop/Tail/Turn Light:
#ECVR41STTELP-RD
Benefits
• Unique design combines two lights in one; a 4” Stop/Tail/Turn w/ a built-in
white LED License Plate Light
• Screw mount installation w/ weatherproof seal w/ adhered neoprene gasket
• Advanced optical technology exceeds all FMVSS & SAE requirements
• All the same great features as our R4 4” Round Signal Lights, see pages 5 - 6
• Weatherproof seal w/ adhered neoprene gasket
• Includes mounting hardware w/ 8” three-wire lead for installation
Premium Series
• Greater number of LEDs (our brightest light)
RD Series
• Budget friendly, lower-priced LED solution
Tech Specs
Input Voltage:
Current
Consumption:
LEDs:
Mounting:
13
Dimensions:
Premium Combo Light
RD Combo Light
10 - 16 Vdc
@ 12.8 Vdc
Stop/Tail w/ Lic. Plt. Light: 0.26 amps
Tail w/ Lic. Plt. Light 0.07 amps
@ 12.8 Vdc
Stop/Turn w/ Lic. Plt. Light: 0.20 amps
Tail w/ Lic. Plt: 0.01 amps
STT Light: 31 Gen2, Red
License Plate Light: 8 Gen1, White
STT Light: 13 Gen2, Red
License Plate Light: 8 Gen1, White
Screw Mount
4.7” (119 mm) diameter x 3” (76 mm) depth
LED License Plate Lights
Compact & 4” Round STT Combo
LEDCOMPACT LICENSE PLATE LIGHT
Standard: #ECVLPBLED
10 - 30 volt: #ECVLPBLED3Ø
Benefits
• Brightly illuminates license plates & bus numbers for easy identification
in the dark w/ 4 white Gen2 LEDs
• Durable, rustproof black polycarbonate housing complements other
bus accessories & lights
• Slim design is less likely to be hit during backup maneuvers
• Specially engineered lens to boost light output & brightness
• Sonic welded, waterproof construction
• UV inhibitor lens prevents sun fade
• Includes mounting hardware w/ 8” two-wire lead for installation
Tech Specs
Compact Standard
Compact 10 - 30v
Input Voltage:
10 - 16 Vdc
10 - 30 Vdc
Current
Consumption:
@ 12.8 Vdc
0.04 amps
@ 25.8 Vdc
0.04 amps
LEDs:
Mounting:
Dimensions:
4 Gen2
Surface Mount on 2” centers
Light: 3.5” (89 mm) width x 2.5” height (64 mm) x 1.25” (32 mm) depth
w/ Rubber Gasket: 1.75” (44 mm) depth
14
120RD SERIES I.D. BAR
Delphi
Metri-pack
Connector
#ECVIDML12(x)-RD
(x)= Y R
Benefits
• Specially engineered lens to
o boost light output
& brightness
• Sonic welded, waterproof construction
onstruction
• Lens w/ UV inhibitor prevents sun fade
• Compact & slim designs
Bus Installations
120 Premium Series Marker
• Brightest light
• PC/P2 rated combination clearance & marker
lights are perfect for bus front & rear corner
mounting
• Optional black Mounting Guard available
• Light includes neoprene gasket, mounting
hardware & 7” two-wire leads w/ .180 molded
bullets
120 RD Series I.D. Bar
• Budget friendly, lower-priced LED solution
• P2 rated combination clearance & marker lights
are perfect for bus front & rear corner mounting
• Attractive polycarbonate base protects lights
• Light includes neoprene gasket, mounting
hardware & 7” two-wire leads w/ Delphi 150
Series Metri-Pack connector
140 Series Marker
15
• P2 & P3 rated combination clearance & marker
lights are perfect for bus front & rear corner
mounting
• Flush mount design w/ built-in reflector on lens
• Light includes neoprene gasket, mounting
hardware & 7” two-wire leads w/ .180 molded
bullets
Tech Specs
120 RD Series I.D. Bar
Input Voltage:
10 - 16 Vdc
Current
Consumption:
@ 12.8 Vdc
0.16 amps
LEDs:
Mounting:
Dimensions:
9 Gen2
Surface Mount
on 16.5” (42 cm) centers
17” (43 cm) length x 1” (25 mm) width
x 1.44” (37 mm) depth
120PREMIUM SERIES
LED Marker/clearance
Marker #ECVML121(x)
w/ Mounting Guard #ECVML122(x)
120 Series I.D. Bar | 120 & 140 Markers
(x)= Y R
120ACCESSORIES
Mounting Guard #ECVML12BMG
Mounting
Guard
140SERIES
Marker #ECVML141(x)
(x)= Y R
Tech Specs
120 Series Marker
140 Series M
Marker
Input Voltage:
10 - 16 Vdc
10 - 16 Vdc
Current
Consumption:
@ 12.8 Vdc
0.05 amps
@ 12.8 Vdc
40 mA
3 Gen2
2 Gen2
Surface Mount
on 3.15” (80 mm) centers
Surface Mount
on 4” (102 mm) centers
4” (102 mm) length x 1” (25 mm) width
x 0.75” (19 mm) depth
4.5” (114 mm) length x 1.7” (43 mm) width
x 0.4” (10 mm) depth
LEDs:
Mounting:
Dimensions:
16
350SERIES
Marker #ECVMLT351(x)
(x)
(x)= Y R
Armored
A
rmo
rmored
Guard
350ACCESSORIES
Stainless Steel
Armored Guard #ECVMLT35MG
Take advantage of LED lighting for your fleet &
benefit w/ low amp draw, reduced vehicle downtime, lower maintenance & increased safety.
SoundOff Signal offers a complete line of LED
Marker/Clearance lights in a variety of sizes.
Benefits:
• PC/P2 rated markers are perfect for bus front &
rear corner mounting
• Specially engineered lens to boost light output
& brightness
• Sonic welded, waterproof construction
• Lens w/ UV inhibitor prevents sun fade
150 Series
• Compact design
• Optional Chrome Mounting Base or Mounting
Guards in Black or Chrome finishes
• Light includes neoprene gasket & 7” two-wire
leads w/ standard female plug
350 Series
• Triangular design w/ optional stainless steel
Mounting Guard
• Light includes neoprene gasket, mounting
hardware & 5” self-grounding, single-wire lead
w/ stripped wire end
17
Bus Installations
150SERIES
LED Marker/clearance
#ECVML151(x)
#ECVML152(x)
#ECVML153(x)
#ECVML154(x)
#ECVML155(x)
350 Series | 150 Series
Marker
w/ Chrome Mounting Base
w/ Black Mounting Guard & Mating Harness
w/ Chrome Mounting Guard & Mating Harness
w Black Mounting Guard
w/
(x)= Y R
Male Mating
Harness
Mounting
Base
Double
Female
Plug
Neoprene
Gasket
150ACCESSORIES
Chrome Mounting Base #ECVML15CMB
C
Chrome Mounting Guard #ECVML15CMG
Black Mounting Guard #ECVML15BMG
Mounting
Guards
Tech
Specs
150 Series
350 Series
10 - 16 Vdc
Input Voltage:
@ 12.8 Vdc
0.08 amps
@ 12.8 Vdc
0.13 amps
4 Gen2
24 Gen2
Mounting:
Surface Mount with
Mounting Base: 2” (51 mm) centers or
Mounting Guard: 3.875” (98 mm) centers
Surface Mount
on 1.44” (37 mm) centers
Dimensions:
2.5” (64 mm) length x 1.25” (32 mm) width
x 0.88” (22 mm) depth
3.44” (87 mm) height x 2.63” (67 mm) width
x 1.66” (42 mm) depth
Current
Consumption:
LEDs:
18
390SERIES
Marker #ECVML391(x)
(x)= Y R
Benefits
• Specially engineered lens to boost light output
& brightness
• Sonic welded, waterproof construction
• Lens w/ UV inhibitor prevents sun fade
390ACCESSORIES
Black Mounting Base #ECVML39BMB
520 Series
• Narrow design sets flush against the vehicle
• LED OEM & replacement marker light is
designed to fit IC school buses
• Optional Fat Gasket allows surface mounting on
any location for non-IC vehicles
• P2 rated combination clearance & marker lights
are perfect for bus front & rear corner mounting
• Sleek, chrome bezel available to complement
other lighting & accessories
• Light includes neoprene gasket, mounting
hardware & 5” two-wire leads w/ attached
Delphi 150 Series Metri-pack connector
Mounting
Base
520 Premium
• Same benefits as the standard 520 Series w/ a
greater number of LEDs (our brightest light)
• P2 rated combination clearance & marker lights
are perfect for bus front & rear corner mounting
520 RD Series
• Same benefits as the standard 520 Series w/ a
budget friendly, lower price
390 Series
19
• PC/P2 rated marker light is perfect for front &
rear corner mounting on buses
• Light can be surface mounted or used as an LED
retrofit for incandescent lights when used w/
the optional Mounting Base
• Light includes neoprene gasket, mounting
hardware & 7” two-wire leads w/ .180 molded
bullets
Bus Installations
520PREMIUM SERIES
390 Series | 520 Premium & RD Series
(x)= Y R
LED Marker/clearance
Marker #ECVMLDP1(x)
w/ Fat Gasket #ECVMLDP2(x)
Fat Gasket
Delphi
Metri-pack
Connector
520RD SERIES
Marker #ECVMLDP1(x)-RD
(x)= Y R
520ACCESSORIES
Chrome
Chrrome Bezel #ECVMLDP1CB
Chrome Bezel
Tech Specs
390 Series
520 Premium & RD Series
Input Voltage:
10 - 16 Vdc
10 - 16 Vdc
Current
Consumption:
@ 12.8 Vdc
0.08 amps
@ 12.8 Vdc
Premium: 0.06 amps
RD: 0.05 amps
4 Gen2
Premium: 6 Gen2
RD: 1 Gen2
LEDs:
Mounting:
Dimensions:
Surface Mount on 3.25” (83 mm) centers
Surface Mount on 3.75” (95 mm) centers
3.8” (97 mm) length x 1.54” (39 mm) width
x 1.48” (38 mm) depth
5” (127 mm) length x 2.31” (59 mm) width
x 0.875” (22 mm) depth
w/ Fat Gasket 1.63” (41 mm) depth
20
210SERIES
Marker #ECVML21Ø(x)-DWP
(x)= Y R
Take advantage of LED lighting for your fleet
& benefit with low amp draw, reduced vehicle
downtime, lower maintenance & increased
safety. SoundOff Signal offers a complete line of
LED Marker/Clearance lights in a variety of sizes.
Benefits
• Specially engineered Fresnel lens to boost light
output & brightness
• Sonic welded, waterproof construction
• Lens w/ UV inhibitor prevents sun fade
210 Series
• P2 & P3 rated combination clearance, side
marker & identification marker lights is perfect
for bus front & rear corner mounting
• Small, oval flush mount design
• Light includes neoprene gasket, mounting
hardware & 5” two-wire leads w/ attached
Delphi Weather Pack connector
• 200 & 250 Series
• P2 & P3 rated combination clearance, side
marker & identification marker lights is perfect
for bus front & rear corner mounting
• Available in 2” & 2.5” round sizes
• Optional black rubber grommet w/ male mating
harness available
• Lights include 5” two-wire leads w/ double
female connector
21
Tech Specs
210 Series
Input Voltage:
10 - 16 Vdc
Current
Consumption:
@ 12.8 Vdc
0.05 amps
LEDs:
Mounting:
Dimensions:
2 Gen2
Surface Mount
on 1.97” (50 mm) centers
2.32” (59 mm) length x 1.5” (38 mm) width
x 0.43” (11 mm) depth
200SERIES
2” Round LED Marker:
LED Marker/clearance
Marker #ECVML2Ø1(x)
w/ Rubber Grommet & Mating Harness #ECVML2Ø2(x)
210 Series
es | 200 Series | 250 Serie
Series
(x)= Y R
Grommet
Double
Female
Connector
Rubber
Grommet
Male Mating
Harness
250SERIES
2.5” Round LED Marker:
Marker #ECVML251(x)
w/ Rubber Grommet & Mating Harness #ECVML252(x)
(x)= Y R
Tech Specs
200 Series
250 Series
Input Voltage:
10 - 16 Vdc
Current
Consumption:
@ 12.8 Vdc
0.05 amps
LEDs:
4 Gen2
Mounting:
Recess Mount into 2” (51 mm) cut outs
Optional black Rubber Grommet
Recess Mount into 2.5” (64 mm) cut outs
Optional black Rubber Grommet
Dimensions:
2” (51 mm) diameter x 1” (38 mm) depth
2.5” (64 mm) diameter x 1” (38 mm) depth
22
4500SERIES LED
#ELB(xx)B(x)(xx)(xx)
C
L
A
S
S
M
O
U
N
T
H
E
I
G
H
T
C
O
L
O
R
CLASS
COLOR
45=Class 1
42=Class 2
LED COLOR / DOME COLOR
A
MOUNT
A
C=Flat/Pipe
W
M=Magnetic
B
HEIGHT
G
Magnetic Mount:
R
L+=Low, 4” dome
H+=High, 6” dome W
Flat/Pipe:
J
LØ=Low, 4” dome
HØ=High, 6” dome
Tech Specs
AA=A
AA=Amber/Amber
=Amber/Clear
AC =A
WA=White/Amber
WA=W
BB=Blue/Blue
BB=B
B
GG=Green/Green
GG=G
RR=Red/Red
RR=R
WC=White/Clear
WC=W
Red/Blue Split
Red/Bl
Red/B
(J in low
lo dome only)
4500 LED
Input Voltage:
10 - 30 Vdc
Current
Consumption:
1 amp @ 12 Vdc
0.5 amps @ 24 Vdc
Amber, Blue, White: 9 watts
Red: 6 watts
Output:
12 Gen3 LEDs
Technology:
8 Flash Patterns
Flash Patterns:
able
Mounting: Permanent or Magnetic Mounts available
Dimensions:
4.6” (117 mm) or 6.5” (165 mm) heights
x 6.4” (175 mm) diameter
(w/ Dust Cover)
4500 Series LED
•
•
•
•
•
•
Intense 1300 Lumen LED output rated to last 20,000+ hours
Heavy duty black powder coated cast aluminum base
Lens with UV inhibitor prevents sun fade
Easier upgrade to LED technology - same footprint as our 3000 Series
Magnetic or Permanent mounts available in 2 dome heights
Permanent mount has a 1” threaded pipe for easy pipe mounting
3000 Series Strobe
•
•
•
•
•
•
Remote or Self-contained models available in 10 or 20 watt outputs
Rugged polycarbonate base will not rust
Lens with UV inhibitor prevents sun fade
Magnetic or Permanent mounts available in 2 dome heights
Permanent mount has a 1” threaded pipe for easy pipe mounting
All heavy electronics are mounted on the bottom of circuit board to reduce
vibration to increase reliability
5000 Series Economy Strobe
•
•
•
•
23
Heavy duty black powder coated cast aluminum base
Lens with UV inhibitor prevents sun fade
Permanent mount only
All heavy electronics are mounted on the bottom of circuit board to reduce
vibration to increase reliability
NEW!
3000SERIES STROBE
6” Dome
#3(xx)(x)(x)(x)(x)
WAT T S
H M C
E O O
I U L
G N O
H T R
T
HEIGHT
COLOR
3000: ØØ=Remote,
L=Low, 4” dome
1Ø=10 watt, 2Ø=20 watt H=High, 6” dome
(4000 is 20 watt)
MOUNT
FLASH
C=Flat/Pipe
3000: Ø=Remote,
M=Magnetic
7=Double & Quad
(4000 has Double & Quad)
4” Dome
beacons
F
L
A
S
H
LED & Strobe All Weather Beacons
W
A
T
T
S
A
B
C
G
R
J
Ambe Lens
Amber
Blue Lens
L
Clear Lens (white)
Green Lens
Red Le
Lens
Red/Blue Split
Red/B
dome only)
(J in low do
(w/ Dust Cover)
(Strobe Tube 1 Yr.)
BeaconACCESSORIES*
4” Metal Branch Guard #E36ØBG4
6” Metal Branch Guard #E36ØBG6
Clear Dust Cover** #E36ØDC6
*Compatible with the 4500 & 3000 Series Beacons.
Not for use with the 5000 Economy Beacon.
**For California Title 13 compliance.
NOTE: Replacement Parts available for all Beacons, please
ease
see Price Guide for Part Numbers & Pricing.
5000ECONOMY STROBE
Amber Dome #5157LFC
Clear Dome #5157LFA
Tech Specs
3000
0 Strobe
10 - 30 Vdc
Input Voltage:
Current
Consumption:
Output:
Technology:
Flash Patterns:
Mounting:
Dimensions:
5000 E
Economy
10 watt: 1 amp @ 12.8 Vdc, 0.5 amp @ 12.8 Vdc
20 watt: 2 amps @ 12.8 Vdc, 1 amp @ 12.8 Vdc
1.5 amp @ 12.8 Vdc
0.75 amp @ 24 Vdc
10 or 20 watt
15 watts
Xenon Helix Strobe Tube
Xenon “U” Strobe Tube
2 Flash Patterns (user selectable)
Permanent or Magnetic Mount
Permanent Mount
4.6” (117 mm) or 6.5” (165 mm) heights
x 6.4” (175 mm) diameter
5.6” (142 mm) height
x 6.9” (175 mm) diameter
24
IgnitionSECURITYY SYSTEM
6“ (15 cm) L x 3.5” (89 mm) H x 11.5”
.5” (3
(38 mm) D
Mounts on 5.6” (1
(144 cm
cm) centers
Wire Length:
Lengthh: 16” (41 cm)
Heavy Duty Model #ETISSO-Ø6+
+
Ignition Security System
m
• Designed to be compatible with
th many different types of vehicles including
police package vehicles, trucks & b
buses
• For older heavy duty vehicles that require higher current draw through the
ignition switch
• Allows the vehicle to stay running when the key is removed from the
ignition witch
• Brake pedal and shift lever movement disables the I.S.S. & stops the
engine (and sounds horn if connected)
• Driver simply deactivates by turning the key to the Run position & depressing
brake
• Additional relay output provides normally open or normally closed contact
for Starter Disable, Gun Lock Disable, Camera Record, etc.
• Mounts behind the dash and within the wire length of the steering column
• Optional horn or siren alarm
LEDLOAD MODULE
#ECVLDMDLØ1
LED Load Module
• Solution for erratic flash patterns
• Adds 10 watt load across LED lamps restoring flash
rate of mechanical, turn signal & hazard flashers
• For use with LED lights only
3“ (76 mm) W x 2.43” (62 mm) H x 0.75” (19 mm) D
Mounts on 2.4” (61 mm) centers
5.5” (14 cm) wires
25
Any questions regarding vehicle compatibility please call our Technical Service experts at 1.800.338.7337
BusLIGHT MONITOR
#ECVBSLMØ1
electronic products
Bus Light Monitor
Bu
Tech
T
ech Specs
Bus Light Monitor
10 - 16 Vdc
Input Voltage:
In
Warning Lights: 240 mA - 14 amps
Tail Lights: 7.5 mA - 3 amps
Backup Lights: 20 mA - 7.5 amps
Current
Sense:
Surface Mount
on 4.375” (111 mm) centers
Mounting:
Dimensions:
Bus Lt. Monitor, Ignition Sec. System & Flashers
Back of Monitor
• Continuously monitors electrical system
to detect symptoms of battery or alternator failures before they occur
• Direct interchange for existing monitors
- allows the retrofit of monitor & LED
lights on older buses
• The first School Bus Monitor to monitor
all lights by any manufacturer; LED,
Halogen & Incandescent technology
• Patented Technology - the first Bus Light
Monitor to receive a US Patent
4.3” (109 mm) height x 6.6” (18 mm) width
x 1.25” (32 mm) depth
FlashersSELECT-A-PATTERN
Heavy Duty Model (14 amp) ..................... #ETHDSS-SP
Heavy Duty Model w/ AMP Connector..... #ETHDSS-SPA
w/ 18” wire leads ..................................... #ETHFSS-SP
w/ AMP Connector................................... #ETHFSS-SPA
w/ AMP Connector & Harness (14 amp) ... #ETHFSS-SPFL
w/ Weather Seal Connector ..................... #ETHFSS-SPWS
Isolation Model (12v) ................................ #ETHFSS-SP-ISO
Headlight Flashers for Buses
• Designed for positive side switched, 2 or 4 headlight
d
dlight
systems
• Features Select-a-Pattern Technology with 7 user
ash patterns:
e selectable fl
er
flash
PowerPulse™, RoadRunner™, ETM, Q-Switch, Cycle Flash, Single Flash or
Double Flash Alternating
• Durable & non-corrosive ABS plastic housing
• 100% Solid State, potted design for long-lasting, reliable performance
• Built-in shutdown features include protection against: short circuit, over
current, over voltage, under voltage, over temperature & reverse polarity
• 8 - 30 Vdc at 9.5 amps/output
• Dimensions: 4.7“ (12 cm) L x 2” (51 mm) W x 0.7” (18 mm) H
• Mounts on 4” (10 cm) centers
• Wire Length: 18” (46 cm)
Any questions regarding vehicle compatibility please call our Technical Service experts at 1.800.338.7337
26
LEDSTRIP LIGHT
12v #ECVCSMLEDF
24v #ECVCSMLEDF-24
LED
90° CORNER MOUNT LED90° CORNER MOUNT
STRIP LIGHT
STRIP LIGHT, 10-30 VOLT
10” Length
21” Length
32” Length
43” Length
#ECVCSLLED1Ø
#ECVCSLLED21
#ECVCSLLED32
#ECVCSLLED43
10” Length
21” Length
32” Length
43” Length
#ECVCSLLED1Ø-3Ø
#ECVCSLLED21-3Ø
#ECVCSLLED32-3Ø
#ECVCSLLED43-3Ø
LEDFLUSH MOUNT STRIP LIGHT
12” Length
24” Length
36” Length
42” Length
#ECVCLLED12
#ECVCLLED24
#ECVCLLED36
C C
#ECVCLLED42
LED Strip Light
•
•
•
•
•
Simple two wire electrical connection
onnection is easy to install
Light has a white steel base with
ith a scratch
t h resistant
i t t polycarbonate
l
b
t llens
Specially engineered Fresnel lens to boost light output and brightness
Made with Gen3 LEDs for a long-lasting light with no bulbs to change
Includes 2-wire lead w/ a 20” length
LED 90° Corner Mount Strip Light
•
•
•
•
•
Streamlined, low amp draw LED lighting
Housing design allows for clean wire management behind the light
Easy installation - make a simple 2-wire electrical connection
Glossy white powder coated Aluminum housing with a polycarbonate lens
10- 30 volt models available in all lengths
LED Flush Mount Strip Light
27
• Recessed, flush mount brightly illuminates dark spaces
• Specially engineered lens optic directs light away from viewer’s eye while illuminating
interior spaces.
• Easy installation w/ 18” of 2-wire lead, end/trim caps & mounting hardware included.
• Field serviceable - easy access to individual modules.
• Glossy white powder coated Aluminum housing with a polycarbonate lens.
InteriorWHITE LIGHTS
ECVDMLTST4
Interior Dome/Cargo Lights & Strip Lights
White illumination
7” x 3.25” #ECVDMLTST2
6” x 3” #ECVDMLTST4
5” Oval #ECVMLDP2W
EECVDMLTST2
ECVMLDP2W
EC
CVML
C
V
ECVDMLTST2 Dome LightGen3
Gen3 LED
•
•
•
•
Exclusive lens design disperses the maximum amount of light
Great for interior light for overhead lighting on passenger buses
Durable polycarbonate lens & base is a simple surface mount
Includes 2-wire lead w/ a 5” length & mounting screws for installation
ECVDMLTST4 Dome Light Gen2 LED
•
•
•
•
Smaller size with a lower price is budget friendly
Easy surface mount with a simple 2-wire electrical connection required
Great interior light for overhead lighting on passenger buses
Includes 2-wire lead w/ a 5” length & mounting screws for installation
ECVMLDP2W 5” Oval Gen2 LED
• Narrow design sets flush against the vehicle
• Fat Gasket for surface mounting
• Includes 2-wire lead w/ a 5” length &
mounting screws for installation
DomeLIGHTS
Red LED
Night Light
Nigh
12v, White LED #ECVDMLTØLMP
MPP
Ø
10-30v, White w/ Red LED Night Light #ECVDMLTALØØ
Round LED Dome Lights
•
•
•
•
Opaque lens with White LED Light
Easily accessible On/Off Switch on the lens
12 & 10-30 volt models available
12 volt light features Red LED Night Light that allows driver to see outside
the vehicle while reducing eye fatigue
• Universal surface mount design
28
NEW!
LED4” CURB/ENTRY LIGHT
Standard (no connector) #ECVCBLTST
10-30v (Delphi Weather Pack connector) #ECVCBLTST-WP
Bus Installations & Product Images
• Durable & rustproof polycarbonate
housing in an attractive black finish
complements other bus accessories &
lights
• Surface mount design
• Specially engineered Fresnel lens to
boost light output & brightness
• Meets ADA requirements
• Sonic welded, waterproof construction
for exterior or interior use
• Passes IP67 testing
• Lens with UV inhibitor prevents sun
fade & discoloration
• Light includes neoprene gasket to
create a tight, waterproof seal
• Includes mounting screws with 6.5”
two-wire lead
Tech Specs
4” Oval LED Curb/Entry Light
Input Voltage:
10 - 30 Vdc
Current
Consumption:
@ 12.8 Vdc: 0.3 amps
@ 25.8 Vdc: 0.15 amps
LEDs:
Mounting:
Dimensions:
29
1 Gen3
Surface Mount on 3.09” (78 mm) centers
4” (102 mm) width x 2.74” (70 mm) height x 1.27” (32 mm) depth
LED4.5” STEPWELL LIGHT
#ECVSWLTST
stepwell Lights
• Made with a single superr
bright Gen3 LED
• Provides excellent
lighting at the entrance
of buses & wheel chair
lifts to illuminate the
steps for safe entry & exit
in dark conditions
• Meets ADA requirements
• Specially engineered
Fresnel lens to boost
light output & brightness
• Easy retrofit for incandescent lights as it fits
existing drill holes
• Durable & shatter resistant clear polycarbonate
lens has UV inhibitor to
prevent discoloration
• Excellent heat dispersion – lens stays cool to
the touch
• Sonic welded, water
proof construction
• Weatherproof seal w/
adhered neoprene
gasket
• Includes mounting
screws with 6.5” twowire lead
Tech Specs
Bus Installations & Product Images
g
4.5” Round LED Stepwell Light
Input Voltage:
10 - 30 Vdc
Current
Consumption:
@ 12.8 Vdc: 0.3 amps
@ 25.8 Vdc: 0.15 amps
LEDs:
Mounting:
Dimensions:
4” Oval Curb/Entry & 4.5
4
4.5” R
Round Stepwell
NEW!
1 Gen3
Surface Mount - fits existing incandescent light drill holes
4.48” (114 mm) diameter x 1.20” (30 mm) depth
30
When the going gets tough,
WE GET
GOING.
Hudsonville
Hudsonvill
le
Grand
Gran Rapids
Holland
Lansing
2001
UʈÀÃÌÊ
ÕÃʈ}…ÌÃ
2002
After 36 years of experience,
we are the proud professionals
for vehicle safety products.
Exploding in growth for the past
10 years, SoundOff Signal has
grown significantly to be a trusted
employee-owned company. Our
American ingenuity and innovation provide Michigan-based
manufacturing you can count on.
Our customers are the heart
and soul of our company, and
we thank you for your business
during these tough times.
To learn more, give us a call
1.800.338.7337 or visit us at
www.soundoffsignal.com.
UʈÀÃÌÊ
7>À˜ˆ˜}ʈ}…ÌÃ
2004
UÊ
…>˜}i`
˜>“iÊ̜
-œÕ˜`"vvÊ-ˆ}˜>
UÊ*Ài`>̜ÀÊÓÒ
«Àœ`ÕVÌÃ
ˆ˜ÌÀœ`ÕVi`
2005
UÊՈÌʘiÜÊv>VˆˆÌÞ
2006
UÊ"vviÀi`Ê
i“«œÞiiÃÊ
Ã̜VŽÊœÜ˜iÀň«Ê
­-"*®
2007
UʈÀÃÌÊʈ}…ÌL>ÀÊ
­/ÊxäääÒ®
2008/2009
UÊ£™Ì…ÊVœ˜ÃiVṎÛiÊ
Þi>Àʜvʈ˜VÀi>Ãi`Ê
“>ÀŽiÌÊÅ>Ài
Óä£ä
U
œ˜Ìˆ˜ÕœÕÃÊ
}ÀœÜ̅ÊE
ˆ˜˜œÛ>̈œ˜
We are SoundOff Signal.
Continually providing quality Michigan-based
safety products to keep your fleets safe.
31
31
2011 bus/Comm. Veh. Catalog
Professional LED Lighting Products
SoundOff Signal offers
LED lighting for every
type of bus & commercial
vehicle. Many more LED
products available, ask
about our Amber & Warning
Products Catalogs. Or visit
our website at
www.soundoffsignal.com.
Smarter Products.
32
Superior Customer Relationships
Smartly Designed Lighting & Electronic Solutions
P L OY E E O W N E D
ESOP
EM
COMPANY
“Employee Owners Making the Difference”
© 2011 SoundOff Signal
Rev. 0111 / Printed in the USA / All Rights Reserved / Specifications & availability are subject to change without notice.
PO Box 206 / Hudsonville, MI 49426 / 800.338.7337 / office 616.896.7100 / order fax 616.896.1286
www.soundoffsignal.com / ISO-9001 Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement