Sony | FDR-X1000VR | Instruction manual | Checking the bundled items Name of main parts Charging

4-566-638-11(1)
Checking the bundled items
•Camera (1)
Camera is set in the Waterproof Case. Open the cover of the case as illustrated
below.
Digital 4K Video Camera Recorder
Startup Guide
For the detailed information on how to use the camera and software,
visit the following Web site.
http://www.sony.net/actioncam/support/
To edit movies, use the PC software dedicated to the camera “Action
Cam Movie Creator.” You can download it from the following Web site.
http://www.sony.net/acmc/
The information on the sticker (in the perforated box, below) is required
when connecting the camera to a smartphone.
FDR-X1000V
•Micro USB cable (1)
•Rechargeable battery pack
(NP-BX1) (1)
•Waterproof Case (1)
•Attachment Buckle (1)
•Flat Adhesive Mount (1)
•Curved Adhesive Mount (1)
•Startup Guide (this document) (1)
•Reference Guide (1)
Getting Started
4
Confirm that the camera is turned off.
Charging the battery pack
1
Slide the lock lever down to open the battery pack cover.
To turn off the camera, press the NEXT or PREV button several
times to display [PwOFF], and press the ENTER button.
5
Open the connector cover () and connect the camera to
an activated computer with the micro USB cable (supplied)
().
Lights in amber
while charging
•Insert the memory card properly, confirming each side is facing the
correct direction.
•To eject the memory card, lightly push the memory card once.
*Use an SDXC card (Class10) when recording movies in XAVC S. Use an
SDXC UHS-I memory card (U3) when recording movies with 100 Mbps.
Notes
•Operation with all memory cards is not assured.
•Confirm the direction of the memory card. If you forcibly insert the memory card
in the wrong direction, the memory card, memory card slot, or image data may
be damaged.
•Format the memory card before use.
•Confirm that the connector cover and the battery pack/memory card cover are
securely closed and any foreign matter is not stuck in the cover before use.
Otherwise, it may result in water immersion.
Name of main parts
Setting the clock
REC HOLD switch
REC (Movie/Photo) button/
ENTER (Menu execute) button
 (N mark)
PREV (previous menu) button
NEXT (next menu) button
Display panel
Speaker
REC/LIVE lamp
IR remote receiver
Lens
Microphones
Connector cover (HDMI OUT,
Multi/Micro USB Terminal)
REC/access/CHG (charge) lamp
Lock lever
Battery pack/memory card cover
Press the NEXT or PREV button and select [SETUP]  [CONFG] 
[DATE] to set the date and time, and region.
2
Insert the battery pack.
Notes
•During periods of extended shooting, camera temperature may rise to a point
where shooting stops automatically.
•Playback of images recorded with other cameras, is not assured on this camera.
•If you play back [XAVC S 120p/100p] or [XAVC S 240p/200p] movies recorded
with this camera on a camera which does not support that format, the camera
may freeze. In this case, remove and reinsert the battery.
Setting
You can change the shooting mode and various settings of the camera
in [SETUP] mode.
1
2
Press the NEXT or PREV button to display [SETUP] and press
the ENTER button.
Press the NEXT or PREV button to display the item to set
and press the ENTER button.
Recording
Connector cover
Micro USB cable
1
2
3
Press the NEXT or PREV button to turn the camera on.
Inserting a memory card
Press the NEXT or PREV button to select the desired
shooting mode.
Align the  mark as illustrated.
Press the REC button to start recording.
3
Terminal
side
Close the cover.
Confirm that the yellow mark on the lock lever is not visible.
microSD card/
microSDHC card/
microSDXC card
Printed
side
Memory Stick Micro™
(Mark2) media
To stop recording, press the REC button again.
* When you press the REC button while the camera is turned off,
recording starts with the last shooting mode set before the
camera was turned off.
© 2015 Sony Corporation
http://www.sony.net/
Printed in China
Menu items
Connecting to a separately sold Live-View Remote
List of modes
Items you can set in SETUP
Items you can set in CONFG
Display
Modes
Display
Items
Display
Items
LOOP
Loop recording mode
VMODE
Image quality setting mode
Wi-Fi
Wi-Fi connection
MOVIE
Movie mode
V.FMT
Movie format
GPS
GPS log
PHOTO
Photo mode
STEDY
SteadyShot
PLANE
Airplane mode
INTVL
Interval photo recording mode
AUDIO
Audio recording
MOUNT
Mount*1
LIVE
Live streaming mode
WIND
Wind noise reduction
TC/UB
Time code/user bit
COLOR
Color mode
IR-RC
IR-remote controller
HDMI settings
SETUP
Setup mode
L.OPT
Loop recording time
HDMI
PLAY
Play mode
DRIVE
Still image mode switching
BGM
Back ground music*1, *2
PwOFF
Power off
FPS
Still image shooting interval
USBPw
USB power supply
SELF
Self-timer
A.OFF
Auto power off
ANGL
Still image angle of view
BEEP
Beep
LAPSE
Interval photo recording
DATE
Date & time setting
FLIP
Flip
SCENE
Scene
DST
Daylight saving time (summer time)
setting
WB
White balance
LANG
Language setting
AESFT
AE shift
V.SYS
Switching NTSC/PAL
CONFG
Configuration Settings
VER.
Version
FORMT
Format
RESET
Resetting the settings
Notes
•Button operations
–– NEXT: Goes to the next menu
–– PREV: Goes to the previous menu
–– ENTER: Executes the menu
•To return to the [SETUP] or [CONFG] menu from
each setup item, select [BACK], then press the
ENTER button.
•When you press the NEXT button and PREV button
simultaneously, you can go to the Wi-Fi setting
menu.
•The menu may change depending on the camera
operating conditions.
*1 These are the setup items for Highlight Movie
Maker. For details, refer to the Help Guide.
*2This function is not available in some countries/
regions.
1
iOS
Turn on the power of the Live-View Remote.
For details on operation, refer to the Help Guide of the Live-View
Remote.
2
3
4
Press the NEXT or PREV button to select [SETUP] 
[CONFG]  [Wi-Fi]  [ON].
Select the SSID of the camera (attached to this manual) on
the Live-View Remote.
When [ACPT?] is displayed on the display panel of the
camera, press the ENTER button of the camera.
Connecting to the smartphone
You can operate the camera with your smartphone as well as the
separately sold Live-View Remote.
Installing PlayMemories Mobile™ on
your smartphone
Android OS
Search for PlayMemories Mobile on Google Play, then
install it. When using One-touch functions (NFC),
Android 4.0 or later is required.
Android (Supporting NFC)
Search for PlayMemories Mobile on App Store, then
install it. When using iOS, One-touch functions (NFC) are
not available.
Notes
•Update PlayMemories Mobile to the latest version if you have already installed
it on your smartphone.
•The Wi-Fi function described in this manual is not guaranteed to work with all
smartphones and tablets.
•The operation methods and display screens for the application are subject to
change without notice by future upgrades.
•For more information about PlayMemories Mobile, refer to the following
website.
(http://www.sony.net/pmm/)
•Google play may not be supported depending on country or region. In this case,
search for “PlayMemories Mobile” on the internet then install it.
Set Wi-Fi to ON on the camera, and touch the (N mark) of the
smartphone against the (N mark) of the camera.
When PlayMemories Mobile starts, settings are automatically applied
to establish Wi-Fi connection.
iPhone
Turn on the camera, and set Wi-Fi to ON on the camera.
Select the shooting mode: [LOOP], [MOVIE], [PHOTO], [INTVL].
Open [Settings] on the smartphone.
Select [Wi-Fi] on the smartphone.
Select the SSID that is printed on the sticker attached to this manual.
Input the password on the same sticker (First time only).
Confirm that the SSID of the camera is displayed on the smartphone.
Return to the Home screen, then start PlayMemories Mobile.

Connecting



Android
Turn on the camera, and set Wi-Fi to ON on the camera.
Select the shooting mode: [LOOP], [MOVIE], [PHOTO], [INTVL].
Start PlayMemories Mobile on the smartphone.
Select the SSID that is printed on the sticker attached to this manual.
Input the password on the same sticker (First time only).



If the sticker is lost
If the sticker is lost, you can recall your user ID and password by the
following procedure.
Insert a charged battery pack into the camera.
Connect the camera to a computer with the micro USB cable
(supplied).
Press the NEXT or PREV button to turn the camera on.
Display [Computer]  [PMHOME]  [INFO]  [WIFI_INF.TXT] on
your computer, then confirm your ID and password.
Using Help Guide
“Help Guide” is the online instruction manual.
Use this for details on how to use the camera, what you can set/
operate with your smartphone, and safety precautions.
http://rd1.sony.net/help/cam/1520/h_zz/
Download PDF

advertising