DIA-250 - Shopify
DIA-250
High End Integrated Amplifier / DAC
The Gato Audio DIA-250 Integrated Amplifier with digital inputs is designed and built
to a vision of combining technology, power, soni performance, connectivity, versatility,
stunning looks and compact design.
Class-D with smooth analogue music
The DIA-250 amplifier offers a state of the art Class-D ouput stage with dedicated and optimized switch
mode power supplies. The multiple stage power amplifier is built around proven technology for
mInternational Rectifier, optimized with a precision high frequency oscillator nad PWM modulator. A pair of
precision switchin MOS-FET transistors, with super low on-resistance ensures the high frequency swithching
is done perfectly and with as little loss as possible. The outut filters are made from quality PP capacitors and
low DCR coils, converting the high power PWM signals back into detailed and smoot analogue music.
More than just an Amp
The built-in D/A convertor offers real high end performance, enabled by the use of a dedicated power
supply, a balanced-drive Burr-Brown PCM1794 D/A converter, an optimized high bandwidth I/V converter,
and an analogue stage with low-Q, low pass filters. All digital inputs are upsampled to 24bit/192kHz. This
D/A converter will upgrade any digital source - such as wired or wireless streaming from your computer or
CD drive - to a high end level of detail and musical performance.
Versatility and Connectivity
We had our eye on versatility and connectivity when designing this amplifier. The DIA-250 offers not only a
wider range of digital and analogue inputs, but also line outputs, a trigger signal for external power
amplifiers, and a configurable home theater input. The HT input can turn the amplifier into a fixed level power
amplifier for use in a surround setup, without compromising the sonic performance.
Features:
Available Finishes:
* 2 x 250W @ 8 oHm / 2 x 500W @ 4 Ohm
* Class D output stage
* Built in 24bit/192kHz D/A converter with
upsampling
* High Gloss Black
* High Gloss Walnut
* High Gloss White
* Coax and asynchronous USB digital input
up to 24bit/192kHz, optical up to
24bit/96kHz
* Accepts digital streaming directly from Apple iPad
* Two unbalanced and one balanced inputs
* Nonmagnetic enclosure
* Direct function; enables use in home theater sytems
SPECIFICATIONS
Output power (230 VAC)
:
2x 250 W 8 Ω / 2x 500 4 Ω
Frequency response
:
20 Hz - 20 kHz ± 0.5 dB, and 2 Hz - 70 kHz - 3 dB
Total Harmonic Distortion
:
< 0,01 % at rated power
Signal to Noise ratio
:
> 110 dB
Line out maximum level
13V balanced, 6,5V unbalanced
Total Harmonic Distortion
:
< 0,001 % pre out
Input impedance
:
20kΩ RCA or 40kΩ Balanced
Line out impedance
:
75 Ω
Voltage Gain
:
26 dB (+10 dB headroom)
Recommended speaker load
:
4 Ω - 16 Ω
Balanced analogue inputs
:
1 pair gold plated XLR Neutrik
Unbalanced analogue inputs
:
2 pairs of gold plated RCA Stereo
Digital inputs
:
1 pc USB type B, 1 pc Toslink, 1 pc RCA
Balanced analogue outputs
:
1 pair gold plated XLR Neutrik
Unbalanced analogue outputs
:
1 pair of gold plated RCA Stereo
Speaker output
:
2 pairs of gold plated safety banana
Trigger, 12V
:
1 pc mini jack
Power Requirements
:
115 VAC/230 VAC, 50 Hz/60 Hz, 1000W max
Power Consumption stdb/idle/max
:
< 1W/23W/1000W
Connectors
Size & Power
Dimensions
Weight
325 x 105 x 420 mm / 12.8 x 4.1 x 16.5 inch.
:
10 Kg / 22 Lb.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement