KD-AR959BS / KD-R950BT / KD-R85MBS / KD
ENGLISH
ESPAÑOL
FRANÇAIS
KD-AR959BS / KD-R950BT / KD-R85MBS /
KD-AR855BT / KD-R850BT
CD RECEIVER
INSTRUCTION MANUAL
RECEPTOR CON CD
MANUAL DE INSTRUCCIONES
RÉCEPTEUR CD
MANUEL D’INSTRUCTIONS
Please read all instructions carefully before
operation to obtain the best possible performance
from the unit.
Por favor lea detenidamente este manual para
comprender a fondo todas las instrucciones y
obtener un máximo disfrute de esta unidad.
Veuillez lires les instructions attentivement avant
d’utiliser l’appareil afin d’obtenir les meilleures
performances possibles de l’appareil.
For customer Use:
Enter below the Model No. and Serial No. which are
located on the top or bottom of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
GET0981-001B [J]
JS_JVC_KD_AR959_J_C001B.indd 1
20/10/2014 2:46:08 PM
CAUTION
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
In compliance with Federal Regulations, following are reproductions of labels on, or inside
the product relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top Plate
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de
la vida útil (aplicable a los países que hayan adoptado sistemas independientes de
recogida de residuos)
Los productos con el símbolo de un contenedor con ruedas tachado no
podrán ser desechados como residuos domésticos. Los equipos eléctricos y
electrónicos al final de la vida útil, deberán ser reciclados en instalaciones
que puedan dar el tratamiento adecuado a estos productos y a sus
subproductos residuales correspondientes. Póngase en contacto con su
administración local para obtener información sobre el punto de recogida
más cercano. Un tratamiento correcto del reciclaje y la eliminación de
residuos ayuda a conservar los recursos y evita al mismo tiempo efectos
perjudiciales en la salud y el medio ambiente.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment may
cause harmful interference to radio communications, if it is not installed and used in
accordance with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—
special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
Informação sobre a eliminação de pilhas
Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada
ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou
importador.
A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos
naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio
ambiente.
i
JS_JVC_KD_AR959_J_S001A.indd i
12/6/2013 9:52:28 AM
Para cumplimiento de la COFETEL:
“La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada”
IC (Industry Canada) Notice
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
The term “IC: ” before the certification/ registration number only signifies that the Industry
Canada technical specification were met.
Note de IC (Industrie Canada)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
L’expression “IC:” avant le numéro d’homologation/ enregistrement signifie seulement que
les specifications techniques d’Industrie Canada ont été respectées.
CAUTION
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C
to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and operated keeping the
radiator at least 20cm or more away from person’s body (excluding extremities: hands,
wrists, feet and ankles). Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
ATTENTION
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui
est considérée conforme sans évaluation de l’exposition maximale autorisée. Cependant,
cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre
le dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et
chevilles). Conformément à la réglementation d’Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé
pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
• Contains Bluetooth Module
• Contains Bluetooth Module
FCC ID: XQN-BTR60X
IC: 9688A-BTR601
ii
JS_JVC_KD_AR959_J_S001A.indd ii
11/25/2013 5:54:22 PM
CONTENTS
BEFORE USE
BEFORE USE
2
BASICS
3
GETTING STARTED
4
CD / USB / iPod
5
RADIO
7
AUX
8
Pandora®
9
iHeartRadio®
10
SiriusXM® Radio
(for KD-AR959BS / KD-R85MBS)
11
BLUETOOTH®
13
AUDIO SETTINGS
19
DISPLAY SETTINGS
20
MORE INFORMATION
21
TROUBLESHOOTING
23
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level.
General:
• Avoid using the USB device or iPod/iPhone if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded
data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short
circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
Remote control (RM-RK52):
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or
equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used
batteries promptly. If swallowed, contact a physician immediately.
Maintenance
INSTALLATION /
CONNECTION
26
SPECIFICATIONS
29
How to read this manual
• Operations are explained mainly
using buttons on the faceplate of
KD-AR855BT.
• [XX] indicates the selected items.
• ( XX) indicates references are
available on the stated page.
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector
gently with a cotton swab, being careful not to damage the connector.
Handling discs:
• Do not touch the recording surface of the disc.
Connector (on the reverse
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
side of the faceplate)
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
2
JS_JVC_KD_AR959_J_ff_EN.indd 2
20/10/2014 2:46:43 PM
BASICS
Faceplate
Remote control (RM-RK52)
Attach
KD-R85MBS can be remotely controlled with an
optionally purchased remote control.
Remote sensor (Do not expose
to bright sunlight.)
Display window
KD-AR959BS
KD-R950BT
Volume knob
(turn/press)
Detach
Loading slot
Pull out the insulation sheet
when using for the first time.
How to reset
How to replace the battery
Detach
button
Your preset adjustments
will also be erased.
To
Do this (on the faceplate)
Do this (on the remote control)
Turn on the power
Press B /SOURCE.
• Press and hold to turn off the power.
( not available )
Adjust the volume
Turn the volume knob.
Press VOL + or VOL –.
Press the volume knob to mute the sound or pause playback.
• Press again to cancel.
Press
to mute the sound or pause playback.
• Press again to cancel.
Select a source
• Press B /SOURCE repeatedly.
• Press B /SOURCE, then turn the volume knob within 2 seconds.
Press SOURCE repeatedly.
Change the display
information
Press DISP repeatedly. ( 23)
• Press and hold to scroll the current display information.
( not available )
ENGLISH |
JS_JVC_KD_AR959_J_ff_EN.indd 3
3
20/10/2014 2:46:56 PM
GETTING STARTED
Default: XX
CLOCK
1
1
2
3
4
Cancel the demonstration
Press and hold MENU.
Turn the volume knob to select [DEMO], then press the knob.
Turn the volume knob to select [DEMO OFF], then press the knob.
Press MENU to exit.
2
Set the clock
1
2
3
4
Press and hold MENU.
Turn the volume knob to select [CLOCK], then press the knob.
Turn the volume knob to select [CLOCK SET], then press the knob.
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [24H/ 12H], then press the knob.
6 Turn the volume knob to select [12 HOUR] or [24 HOUR], then press the
knob.
7 Press MENU to exit.
CLOCK ADJ
AUTO: The clock time is automatically set using the Clock Time (CT) data
in FM Radio Broadcast Data System signal. ; OFF: Cancels.
CLOCK DISP
ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
SETTINGS
BEEP
ON: Activates the keypress tone. ; OFF: Deactivates.
SRC SELECT
AM *
ON: Enables AM in source selection. ; OFF: Disables.
PANDORA *
ON: Enables PANDORA in source selection. ; OFF: Disables.
IHEART *
ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
AUX *
ON: Enables AUX in source selection. ; OFF: Disables.
F/W UPDATE
SYSTEM / BLUETOOTH
F/W xxxx
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
* Not displayed when the corresponding source is selected.
3
Set the basic settings
1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
4
JS_JVC_KD_AR959_J_02_EN.indd 4
11/25/2013 5:55:40 PM
CD / USB / iPod
Start playback
The source changes automatically and
playback starts.
CD
Eject disc
Label side
USB
USB input terminal
USB 2.0 cable*1
(commercially available)
To
Do this
Select a track/file
Press S/ T (or press H / I on RM-RK52).
Select a folder *3
Press 1 K / 2 J (or press J / K on RM-RK52).
Reverse/
Fast-forward
Press and hold S/ T (or press and hold H / I on RM-RK52).
Repeat play *4
Press 4 B repeatedly to make a selection.
• Audio CD or JVC Playlist Creator (JPC) / JVC Music Control (JMC) file ( 22):
TRACK RPT, RPT OFF
• MP3/WMA/WAV file: TRACK RPT, FOLDER RPT, RPT OFF
• iPod: ONE RPT, ALL RPT, RPT OFF
Random play *4
Press 3 A repeatedly to make a selection.
• Audio CD: ALL RND, RND OFF
• MP3/WMA/WAV file or JPC / JMC file: FOLDER RND, ALL RND, RND OFF
• iPod: SONG RND, ALL RND, RND OFF
iPod/iPhone
USB input terminal
(Accessory of the iPod/iPhone)*1
Press 5 iPod MODE repeatedly to select the
control mode ([HEAD MODE] / [IPHONE MODE]).
HEAD MODE: From the unit.
IPHONE MODE: From the iPod/iPhone.*2
*1
*2
*3
*4
Do not leave the cable inside the car when not using.
You can still play/pause, file skip, fast-forward or reverse files from the unit.
Only for MP3/WMA/WAV files. This does not work for iPod.
For iPod: Applicable under [HEAD MODE] only.
ENGLISH |
JS_JVC_KD_AR959_J_f_EN.indd 5
5
12/16/2013 11:51:15 AM
CD / USB / iPod
Select a track/file from a list
For iPod: Applicable only when [HEAD MODE] is selected. ( 5)
1 Press MENU .
2 Turn the volume knob to make a selection, then press the knob.
• MP3/WMA/WAV file: Select the desired folder, then a file.
• iPod or JPC / JMC file: Select the desired file from the list (PLAYLISTS,
ARTISTS, ALBUMS, SONGS, PODCASTS*, GENRES, COMPOSERS*,
AUDIOBOOKS*).
* Only for iPod.
If you have many files....
You can search through them quickly (on step 2 above) by turning the
volume knob quickly.
• Not applicable for iPod.
Change the USB drive
When a smartphone (Mass Storage Class) is connected to the USB input
terminal, you can select its internal memory or external memory (such as an
SD card) to playback the stored songs.
You can also select the desired drive to playback when a multiple drives
device is connected.
Press 5 iPod MODE repeatedly to select the desired drive.
(or)
1 Press and hold MENU .
2 Turn the volume knob to select [USB/IPOD], then press the knob.
3 Turn the volume knob to select [USB], then press the knob.
4 Press the volume knob to select [DRIVECHANGE].
The next drive is selected automatically.
Repeat steps 1 to 4 to select the following drives.
Selectable items: [DRIVE 1] to [DRIVE 5]
Select a song by name
While listening to the iPod and [HEAD MODE] is selected ( 5)....
If you have many folders or tracks/files, you can search through them
quickly according to the first character (A to Z, 0 to 9 and OTHERS).
• “OTHERS” appear if the first character is other than A to Z, 0 to 9.
1 Press MENU .
2 Turn the volume knob to select the desired list, then press the
knob.
3 Press 1 K / 2 J or turn the volume knob quickly to select the desired
character.
4 Turn the volume knob to select the desired folder or track/file, then
press the knob.
Change the playback speed of the Audiobook
While listening to the iPod and [HEAD MODE] is selected ( 5)....
1 Press and hold MENU .
2 Turn the volume knob to select [USB/IPOD], then press the knob.
3 Turn the volume knob to select [IPOD], then press the knob.
4 Turn the volume knob to make a selection, then press the knob.
BOOK NORMAL / BOOK FASTER / BOOK SLOWER: Select the desired playback
speed of the Audiobooks sound file in your iPod/iPhone.
(Default: Depends on your iPod/iPhone setting.)
• To return to the previous setting item or hierarchy, press G PTY.
• To cancel, press MENU.
6
JS_JVC_KD_AR959_J_02_EN.indd 6
12/6/2013 9:54:13 AM
RADIO
Search for your favorite program (PTY Search)
“ST” lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1 Press B /SOURCE to select FM or AM.
2 Press S/ T (or press H / I on RM-RK52) to search for a station
automatically.
(or)
Press and hold S/ T (or press and hold H / I on RM-RK52) until
“M” flashes, then press repeatedly to search for a station manually.
Store a station
You can store up to 18 stations for FM and 6 stations for AM.
While listening to a station....
Press and hold one of the number buttons (1 to 6) to store.
(or)
1 Press and hold the volume knob until “PRESET MODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
Available only for FM source.
1 Press and hold G PTY.
2 Turn the volume knob to select a PTY code, then press the knob to
start searching.
If there is a station broadcasting a program of the same PTY code as
you have selected, that station is tuned in.
PTY code: NEWS, INFORM (information), SPORTS, TALK, ROCK, CLS ROCK (classic rock),
ADLT HIT (adult hits), SOFT RCK (softrock), TOP 40, COUNTRY, OLDIES, SOFT, NOSTALGA
(nostalgia), JAZZ, CLASSICL (classical), R & B (rhythm and blues), SOFT R&B (soft rhythm
and blues), LANGUAGE, REL MUSC (religious music), REL TALK (religious talk), PERSNLTY
(personality), PUBLIC, COLLEGE, HABL ESP (Spanish talk), MUSC ESP (Spanish music),
HIP HOP, WEATHER
Other settings
1 Press and hold MENU.
2 Turn the volume knob to select [TUNER], then press the knob.
3 Turn the volume knob to make a selection ( 8), then press the
knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
• To select a stored station: Press one of the number buttons (1 to 6).
(or)
Press MENU, then turn the volume knob to select a preset number and
press the knob to confirm.
ENGLISH |
JS_JVC_KD_AR959_J_02_EN.indd 7
7
11/25/2013 5:55:41 PM
RADIO
Default: XX
RADIO
TIMER
Turns on the radio at a specific time regardless of the current source.
1 ONCE/ DAILY/ WEEKLY/ OFF: Select how often the timer will be turned on.
2 FM/ AM: Select the FM or AM band.
3 01 to 18 (for FM)/ 01 to 06 (for AM): Select the preset station.
4 Set the activation day * and time.
• “M” lights up when complete.
* Selectable only when [ONCE] or [WEEKLY] is selected in step 1.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM] in [SRC SELECT] after Radio Timer for AM is
selected. ( 4)
SSM
SSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18: Automatically presets up to 18
stations for FM. “SSM” stops flashing when the first 6 stations are stored. Select
SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations.
IF BAND
AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
MONO
Displayed only when the source is FM.
ON: Improves the FM reception, but the stereo effect will be lost. ; OFF: Cancels.
AREA
AREA US: For North/Central/South America, AM/FM intervals: 10 kHz/200 kHz. ;
AREA EU: For any other areas, AM/FM intervals: 9 kHz/50 kHz. ; AREA SA: For
some South American countries, AM/FM intervals: 10 kHz/50 kHz.
AUX
Use a portable audio player
1 Connect a portable audio player (commercially available).
3.5 mm (1/8") stereo mini plug with “L” shaped connector
(commercially available)
Auxiliary input jack
Portable audio player
2 Select [ON] for [AUX] in [SRC SELECT]. ( 4)
3 Press B /SOURCE to select AUX.
4 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio
output.
8
JS_JVC_KD_AR959_J_02_EN.indd 8
12/3/2013 10:32:37 AM
Pandora®
Preparation:
Install the latest version of the Pandora application onto your device
(iPhone/ iPod touch), then create an account and log in to Pandora.
• Select [ON] for [PANDORA] in [SRC SELECT]. ( 4)
Create a new station
1 Press MENU.
2 Turn the volume knob to select [NEW STATION], then press the knob.
3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then
press the knob.
A new station is created based on the current song or artist.
Start listening
1 Open the Pandora application on your device.
2 Connect your device to the USB input terminal.
Search for a registered station
1 Press MENU.
2 Turn the volume knob to make a selection, then press the knob.
USB input terminal
[BY DATE]: According to the registered date.
[A-Z]: Alphabetical order.
3 Turn the volume knob to the desired station, then press the knob.
(Accessory of the iPod/iPhone)*
Bookmark a song or artist information
1 Press and hold the volume knob.
2 Turn the volume knob to select [THIS TRACK] or [THIS ARTIST], then
The source changes to PANDORA and broadcast starts.
* Do not leave the cable inside the car when not using.
To
Do this
Pause or resume
playback
Press the volume knob (or press
RM-RK52).
Thumbs up or
thumbs down
Skip a track
on
press the knob.
“BOOKMARKED” appears and the information is stored to your device.
The bookmark is available on your Pandora account but not on this
unit.
Press 2 / 1 (or press J / K on RM-RK52).
• If thumbs down is selected, the current track is
skipped.
Press T (or press I on RM-RK52).
ENGLISH |
JS_JVC_KD_AR959_J_f_EN.indd 9
9
12/12/2013 5:35:12 PM
iHeartRadio®
Preparation:
Install the latest version of iHeart Link for JVC application onto your
device (iPhone/ iPod touch), then create an account and log in to
iHeartRadio.
• Select [ON] for [IHEART] in [SRC SELECT]. ( 4)
Start listening
1 Open the iHeart Link application on your device.
2 Connect your device to the USB input terminal.
USB input terminal
(Accessory of the iPod/iPhone)*
* Do not leave the cable inside the car when not using.
3 Press B /SOURCE to select IHEARTRADIO.
Broadcast starts automatically
To
Do this
Pause or resume playback
Press the volume knob (or press
on RM-RK52).
Thumbs up or thumbs down
Press 2 / 1 (or press J / K on
for custom station
RM-RK52).
• If thumbs down is selected, the
current track is skipped.
Skip a track for custom station
Press T (or press I on RM-RK52).
Create a new/custom station
Press and hold the volume knob.
Add to favorite stations for
Press and hold 3.
live station
Scan for live station
Press 3.
Search for a station
1 Press MENU.
2 Turn the volume knob to select a category, then press the knob.
3 Turn the volume knob to the desired station, then press the knob.
When a city list appears, you can skip cities in alphabetical order.
4 Press MENU to exit.
Skip cities by alphabetical order
While a city list appears during search...
1 Turn the volume knob quickly to enter character search.
You can search through the list quickly according to the first character
(A to Z).
2 Turn the volume knob or press 2 / 1 to select the character to
be search for.
3 Press the volume knob to start searching.
10
JS_JVC_KD_AR959_J_04_EN.indd 10
12/10/2013 11:17:53 AM
SiriusXM® Radio (for KD-AR959BS / KD-R85MBS)
Preparation:
1 Connect the optional SiriusXM Vehicle Tuner (commercially
available).
Antenna
Expansion port on
the rear panel
SiriusXM Vehicle Tuner
2 Activate the subscription through www.siriusxm.com/activatenow
or call 1-866-635-2349.
The Radio ID is required to activate the SiriusXM Vehicle Tuner.
The Radio ID is located on the label of the SiriusXM Vehicle Tuner
and can also be shown on the unit’s display window when you select
“Channel 0” after SiriusXM Vehicle Tuner is connected.
For users in Canada: To activate SiriusXM Canada service go to
www.xmradio.ca and click on “ACTIVATE RADIO” in the top right
corner, or call 1-877-438-9677.
3 Press B /SOURCE to select SIRIUS XM to start updating.
Start listening
1 Press B /SOURCE to select SIRIUS XM.
2 Press MENU.
3 Turn the volume knob to select a CATEGORY, then press the knob.
4 Turn the volume knob to select a category from the list, then press
the knob.
If “ALL CHANNELS” is selected, all the available channels will be
shown.
5 Turn the volume knob to select a channel, then press the knob.
(or)
Press S/ T to search for a channel manually.
• Pressing and holding S/ T changes the channel rapidly.
If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is
selected, a pass code input screen appears. Enter the pass code to receive
the channel.
Store a channel
You can store up to 18 channels.
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESET MODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
To select a stored channel:
Press one of the number buttons (1 to 6).
(or)
1 Press MENU.
2 Turn the volume knob to select PRESET, then press the knob.
3 Turn the volume knob to select a preset number, then press the
knob.
(or)
Press J / K on RM-RK52.
SiriusXM Replay™
1 Press the volume knob.
“ ” lights up and the unit memorizes this paused position.
2 Press the volume knob to start Replay.
Replay starts from the paused position in step 1.
During Replay...
• To pause or resume playback, press the volume knob.
• To skip the current song backward/forward, press S/ T (or press
H / I on RM-RK52).
• To rewind/fast-forward, press and hold S/ T (or press and hold
H / I on RM-RK52).
• To exit from Replay and go to live, press and hold the volume knob.
ENGLISH |
JS_JVC_KD_AR959_J_ff_EN.indd 11
11
20/10/2014 2:47:07 PM
SiriusXM® Radio
Smart Favorites
User preset channels 1 to 6 are initially assigned as the Smart Favorites
channels. SiriusXM Vehicle Tuner automatically buffers the broadcast
audio content of the Smart Favorites channels in the background.
• Smart Favorite channel is available with SXV200 or later SiriusXM tuner
models.
• “ * ” appears at the last character of the channel name for the Smart
Favorites channels.
• This unit can store a maximum of six Smart Favorites channels. If you try
to assign the 7th channel, an error beep tone will be heard.
To cancel the Smart Favorites channels...
1 Press MENU.
2 Turn the volume knob to select PRESET, then press the knob.
3 Turn the volume knob to select a preset number, then press and
hold the knob.
“ * ” are removed from the last character.
To reassign the Smart Favorites channels...
Repeat steps 1 to 3.
“ * ” appears at the last character.
When you select a Smart Favorites channel, you can rewind and replay
up to 30 minutes of any of the missed news, talk, sports or music content.
SiriusXM settings
1 Press and hold MENU.
2 Turn the volume knob to select [SIRIUS XM], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press MENU to exit.
Default: XX
There are two types of lock functions available:
• SiriusXM-defined: When [MATURE CH] is set to [ON]
• User-defined: Using [CHANNEL EDIT] when [MATURE CH] is set to [OFF]
CH LOCK
To unlock settings:
1 Turn the volume knob to select a number.
2 Press S/ T to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code. (Initial pass code is
0000.)
4 Press the volume knob to confirm.
CODE SET 1 Turn the volume knob to select a number.
2 Press S/ T to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings from next
time.
CH EDIT * 1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press the
knob. “L” appears in front of the channel number.
3 Press and hold G PTY to exit.
CH CLEAR* YES: Clears all the locked channels. ; NO: Cancels.
MATURE CH ON: Turns on the SiriusXM-defined lock setting (mature channel). ; OFF: Turns
off.
• If [ON] is selected, your setting [CH EDIT] is temporary ignored.
SIGNAL LVL WEAK/ GOOD/ STRONG: Shows the strength of the current received signal.
BUF USAGE 0% — 100% (0): Shows the memory usage for Replay buffer.
SXM RESET YES: Resets stored channel, locked channel setting and Mature CH setting to
default. ; NO: Cancels.
* Displayed only when [MATURE CH] is set to [OFF].
To return to the previous setting item or hierarchy, press G PTY.
12
JS_JVC_KD_AR959_J_02_EN.indd 12
11/25/2013 5:55:42 PM
BLUETOOTH®
You can operate Bluetooth devices using this unit.
Connect the microphone
Rear panel
Microphone (supplied)
Microphone input jack*
Secure using cord clamps
(not supplied) if necessary.
Adjust the microphone
angle
* For KD-AR959BS / KD-R85MBS, connect to the microphone input terminal.
( 27)
If you turn off the unit or detach the control panel during a phone call
conversation, the Bluetooth connection is disconnected. Continue the
conversation using your mobile phone.
Supported Bluetooth profiles
– Hands-Free Profile (HFP1.5)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP1.3)
– Object Push Profile (OPP)
– Phonebook Access Profile (PBAP)
– Serial Port Profile (SPP)
Pair a Bluetooth device
When connecting a Bluetooth device to the unit for the first time,
perform pairing between the unit and the device. Once the pairing is
completed, the Bluetooth device will remain registered in the unit even if
you reset the unit.
• Up to five devices can be registered (paired) in total.
• A maximum of two Bluetooth phones and one Bluetooth audio device
can be connected at any time.
• This unit supports Secure Simple Pairing (SSP).
• Some Bluetooth devices may not automatically connect to the unit
after pairing. Connect the device to the unit manually. Refer to the
instruction manual of the Bluetooth device for more information.
1 Press B /SOURCE to turn on the unit.
2 Search and select “JVC UNIT” on the Bluetooth device.
“BT PAIRING” flashes on the display.
• For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3 Perform (A) or (B) depending on what scrolls on the display.
• For some Bluetooth devices, pairing sequence may vary from the
steps described below.
(A) “[Device Name]” “XXXXXX” “VOL – YES” “BACK – NO”
• “XXXXXX” is a 6-digit passkey randomly generated during each
pairing.
Ensure that the passkey which appears on the unit and
Bluetooth device is the same.
Press the volume knob to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
(B) “[Device Name]” “VOL – YES” “BACK – NO”
Press the volume knob to start pairing.
• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN
code “0000” into the Bluetooth device.
You can change to a desired PIN code before pairing. ( 17)
• If only “PAIRING” appears, operate the Bluetooth device to
confirm pairing.
ENGLISH |
JS_JVC_KD_AR959_J_ff_EN.indd 13
13
20/10/2014 2:47:19 PM
BLUETOOTH®
“PAIRING COMPLETED” appears when pairing is completed.
• “ ” or “ ” will light up when a Bluetooth mobile phone is connected.
• “ ” will light up when a Bluetooth audio player is connected.
Bluetooth mobile phone
To
Do this
Receive a call
Press
or the volume knob.
On RM-RK52: Press J / K / H / I .
• When [AUTO ANSWER] is set to the selected time, the
unit answers incoming call automatically. ( 15)
Reject an
incoming call
Press and hold
or the volume knob.
On RM-RK52: Press and hold J / K / H / I .
End a call
Press and hold
or the volume knob.
On RM-RK52: Press and hold J / K / H / I .
Activate or
deactivate
hands-free
mode
Adjust the
phone volume
Press the volume knob during a call.
• Operations may vary according to the connected
Bluetooth mobile phone.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device connected.
1 Press and hold
.
“BLUETOOTH”
“CHECK MODE” appears. “SEARCH NOW USING
PHONE” “PIN IS 0000” scrolls on the display.
2 Search and select “JVC UNIT” on the Bluetooth device within
3 minutes.
3 Perform (A), (B) or (C) depending on what appears on the display.
(A) “PAIRING” “XXXXXX” (6-digit passkey): Ensure that the same
passkey appears on the unit and Bluetooth device, then operate
the Bluetooth device to confirm the passkey.
(B) “PAIRING” “PIN IS 0000”: Enter “0000” on the Bluetooth device.
(C) “PAIRING”: Operate the Bluetooth device to confirm pairing.
After pairing is successful, “PAIRING OK” “[Device Name]” appears and
Bluetooth compatibility check starts.
If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device
to allow phonebook access to continue.
The connectivity result flashes on the display.
“PAIRING OK” and/or “H.FREE OK”*1 and/or “A.STREAM OK”*2 and/or
“PBAP OK”*3 : Compatible
*1 Compatible with Hands-Free Profile (HFP)
*2 Compatible with Advanced Audio Distribution Profile (A2DP)
*3 Compatible with Phonebook Access profile (PBAP)
After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B /SOURCE to turn off the power, then turn
on the power again.
Switch between
two connected
phones
Turn the volume knob during a call.
Phone volume: [00] to [50] (Default: [15])
• This adjustment will not affect the volume of the
other sources.
Press
repeatedly.
• Not applicable during a call.
Improve the sound quality during a call
While talking on the phone....
1 Press and hold MENU.
2 Turn the volume knob to make a selection ( 15), then press the
knob.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
14
JS_JVC_KD_AR959_J_f_EN.indd 14
12/12/2013 5:35:37 PM
BLUETOOTH®
Default: XX
MIC LEVEL
–20 — +08 (0): The sensitivity of the microphone increases as the
number increased.
NOISE RDCT
–05 — –20 (–10): Adjust the noise reduction level until the least
noise is being heard during a phone conversation.
ECHO CANCEL
1 — 10 (4): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
DIAL NUMBER
VOICE
1 Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2 Press S / T to move the entry position.
Repeat steps 1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
Speak the name of the contact you want to call or the voice command to
control the phone functions. ( 16, Use Voice Recognition)
SETTINGS
Bluetooth mode operations
to enter Bluetooth mode.
1 Press
2 Turn the volume knob to make a selection (see the following table),
AUTO ANSWER
01 SEC — 30 SEC: The unit answer incoming call automatically in the
selected time (seconds). ; OFF: Cancels.
RING TONE
IN UNIT: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming
calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
IN PHONE: The unit uses the connected phones’ ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
RING COLOR
(for
KD-AR959BS /
KD-R950BT)
COLOR 01 — COLOR 29 (COLOR 06): Display zone will change to
the selected color during a call or when a text message comes in. ;
OFF : Cancels.
MSG NOTICE *
ON: The unit rings and “RCV MESSAGE” appears to notify you of an
incoming text message. ; OFF: Cancels.
then press the knob.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
RECENT CALL
PHONEBOOK
1 Press the volume knob to select a name or a phone number.
• “>” indicates call received, “<“ indicates call made, “M” indicates
call missed.
• “NO HISTORY” appears if there is no recorded call history or call
number.
2 Press the volume knob to call.
1 Turn the volume knob to select a name, then press the knob.
2 Turn the volume knob to select a phone number, then press the knob to
call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does
not support PBAP, “SEND P.BOOK MANUALLY” appears. Transfer the
phonebook manually. ( 17, P.BOOK WAIT)
• This unit can display only non-accent letters. (Accent letters such as “Ú”
is showns as “U”.)
• If the phonebook contains many contacts, ( 16, Select a contact by
name).
Default: XX
* Functionality depends on the type of the phone used.
ENGLISH |
JS_JVC_KD_AR959_J_f_EN.indd 15
15
12/16/2013 11:52:12 AM
BLUETOOTH®
Text message notification
When the phone receives a text message, the unit rings and “RCV
MESSAGE” appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
.
1 Press and hold
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
holding
activate the priority device. ( 17, PRIORITY)
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Select a contact by name
• You can search through the contacts quickly according to the first letter
(A to Z, 0 to 9, and OTHERS).
• “OTHERS” appears if the first character is other than A to Z, 0 to 9.
1 Press
to enter Bluetooth mode.
2 Turn the volume knob to select [PHONEBOOK], then press the knob.
3 Press 1 K / 2 J to select the desired letter.
4 Turn the volume knob to select a name, then press the knob.
5 Turn the volume knob to select a phone number, then press the
knob to call.
To return to the previous setting item or hierarchy, press G PTY.
Store a contact in memory
You can store up to 6 contacts.
1 Press
to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL], [PHONEBOOK], or
[DIAL NUMBER], then press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold one of the number buttons (1 to 6).
“MEMORY P(selected preset number)” appears when the contact is
stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in
step 2 and store a blank number.
Make a call from memory
to enter Bluetooth mode.
1 Press
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
“NO PRESET” appears if there is no contacts stored.
Delete a contact
Not applicable for mobile phone that supports PBAP.
1 Press
to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL] or [PHONEBOOK], then
press the knob.
3 Turn the volume knob to select a contact or a phone number.
4 Press and hold G PTY.
5 Turn the volume knob to select [DELETE] or [DELETE ALL], then press
the knob.
DELETE: Selected name or phone number in step 3 is deleted.
DELETE ALL: All names or phone numbers from the selected menu in
step 2 is deleted.
6 Turn the volume knob to select [YES] or [NO], then press the knob.
16
JS_JVC_KD_AR959_J_02_EN.indd 16
12/6/2013 10:03:17 AM
BLUETOOTH®
Bluetooth mode settings
1 Press and hold MENU.
2 Turn the volume knob to select [BLUETOOTH], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
AUTO CNNCT
ON: The unit automatically reconnect when the Bluetooth device is
within range. ; OFF: Cancels.
INITIALIZE
YES: Updates all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
then press the knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
INFORMATION
MY BT NAME: Displays the unit name (JVC UNIT). ;
MY ADDRESS: Shows address of this unit.
Default: XX
PHONE
AUDIO
Selects the phone or audio device to connect or disconnect.
APPLICATION
Shows the connected phone name using the JVC Smart Music Control *1
app. “ ” appears in front of the device name.
DELETE PAIR
1 Turn the volume knob to select a device to delete, then press the
knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PRIORITY
Selects a device to be connected as priority device. “ ” appears in front
of the device name set as priority.
• “NO PAIR” appears if there is no registered device found.
P.BOOK WAIT *2
Copies up to 400 numbers from the phonebook memory of a connected
phone.
SET PINCODE
(0000)
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
Repeat steps 1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
*1 JVC Smart Music Control is designed to view JVC car receiver status
and perform simple control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www.jvc.net/cs/car/>.
*2 Selectable only when the connected phone supports OPP.
ENGLISH |
JS_JVC_KD_AR959_J_02_EN.indd 17
17
12/3/2013 10:32:54 AM
BLUETOOTH®
Internet radio via Bluetooth
Listen to Pandora
Preparation:
Select [ON] for [PANDORA] in [SRC SELECT]. ( 4)
You can listen to Pandora on your smart phone (Android OS) through
Bluetooth on this unit.
1 Open the Pandora application on your device.
2 Connect to Bluetooth audio player. ( 13)
3 Press B /SOURCE to select PANDORA.
The source switches and broadcast starts automatically.
• You can operate Pandora in the same way as Pandora for iPod/iPhone.
( 9)
Listen to iHeartRadio
Preparation:
Select [ON] for [IHEART] in [SRC SELECT]. ( 4)
You can listen to iHeartRadio on your smart phone (Android OS) through
Bluetooth on this unit.
1 Open the iHeart Link application on your smart phone.
2 Connect your smart phone via Bluetooth connection. ( 13)
3 Press B /SOURCE to select IHEARTRADIO.
The source switches and broadcast starts automatically.
• You can operate iHeartRadio in the same way as iHeartRadio for iPod/
iPhone. ( 10)
Bluetooth audio player
Operations and display indications may differ according to their
availability on the connected device.
To
Playback
Do this
1 Press B /SOURCE to select BT AUDIO.
2 Operate the Bluetooth audio player to start
playback.
Pause or
resume
playback
Press MENU (or press
Select group or
folder
Press 1 K / 2 J (or press J / K on RM-RK52).
Reverse/
forward skip
Press S / T (or press H / I on RM-RK52).
Reverse/
fast-forward
Press and hold S / T (or press and hold H / I on
RM-RK52).
Repeat play
Press 4 B repeatedly to make a selection.
TRACK RPT, ALL RPT, RPT OFF
Random play
Press 3 A repeatedly to make a selection.
GROUP RND, ALL RND, RND OFF
on RM-RK52).
18
JS_JVC_KD_AR959_J_04_EN.indd 18
12/10/2013 11:24:00 AM
AUDIO SETTINGS
1 Press and hold MENU.
2 Turn the volume knob to make a selection, then press the knob.
Repeat step 2 until the desired item is selected.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
Default: XX
EQ SETTING
EQ PRESET
FLAT / HARD ROCK / JAZZ / POP / R&B / TALK / USER1 / USER2 /
VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE: Selects a preset
equalizer.
EASY EQ
Default: 00
1 USER1/ USER2: Select a preset name.
2 Adjust your own sound settings.
(For KD-R85MBS / KD-AR855BT / KD-R850BT)
SUB.W *1: –08 to +08/ BASS LVL: –06 to +06/
MID LVL: –06 to +06/ TRE LVL: –06 to +06
(For KD-AR959BS / KD-R950BT)
SUB.W *1: –08 to +08/ BASS LVL: –10 to +10/
MID LVL: –10 to +10/ TRE LVL: –10 to +10
PRO EQ
1 USER1/ USER2: Select a preset name.
(for
2 BASS / MIDDLE / TREBLE: Select a sound tone.
KD-R85MBS / 3 Adjust the sound elements of the selected sound tone.
KD-AR855BT /
BASS
Frequency: 60/ 80/ 100/ 200 Hz
Default: (80 Hz)
Level:
KD-R850BT)
–06 to +06
(00)
Q:
Q1.0/ Q1.25/ Q1.5/ Q2.0
(Q1.0)
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz
Default: (1.0 kHz)
Level:
–06 to +06
(00)
Q:
Q0.75/ Q1.0/ Q1.25
(Q1.25)
TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz Default: (10.0 kHz)
Level:
–06 to +06
(00)
Q:
Q FIX
(Q FIX)
PRO EQ
1 USER1/ USER2: Select a preset name.
(for
2 BASS / MID BASS / MID / MID HIGH / HIGH: Select a sound tone.
KD-AR959BS / 3 Adjust the sound elements of the selected sound tone.
KD-R950BT)
BASS
Frequency: 63/ 80/ 100/ 125 Hz
Default: (80 Hz)
Level:
–10 to +10
(00)
Q:
Q1.0/ Q1.25/ Q1.5/ Q2.0
(Q1.25)
MID BASS Frequency: 200/ 250/ 315/ 400 Hz
Default: (250 Hz)
Level:
–10 to +10
(00)
Q:
Q1.0/ Q1.25/ Q1.5/ Q2.0
(Q1.25)
MID
Frequency: 630/ 800 Hz/ 1.0/ 1.25 kHz Default: (800 Hz)
Level:
–10 to +10
(00)
Q:
Q0.75/ Q1.0/ Q1.25/ Q2.0
(Q1.0)
MID HIGH Frequency: 2.0/ 2.5/ 3.15/ 4.0 kHz
Default: (2.5 kHz)
Level:
–10 to +10
(00)
Q:
Q0.75/ Q1.0/ Q1.25/ Q2.0
(Q1.0)
HIGH
Frequency: 6.3/ 8.0/ 10.0/ 12.5 kHz
Default: (8.0 kHz)
Level:
–10 to +10
(00)
Q:
Q0.75/ Q1.0/ Q1.25/ Q2.0
(Q1.0)
AUDIO
BASS BOOST
+01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD
01 / 02: Boosts low or high frequencies to produce a well-balanced sound at
low volume. ; OFF: Cancels.
SUB.W LEVEL *1 –08 — +08 (00): Adjusts the subwoofer output level.
SUB.W *2
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF *1
THROUGH: All signals are sent to the subwoofer. ; LOW 55Hz / MID 85Hz /
HIGH 120Hz: Audio signals with frequencies lower than 55 Hz/ 85 Hz/
120 Hz are sent to the subwoofer.
*1 Displayed only when [L/O MODE] is set to [SUB.W] and [SUB.W] is set to
[ON].
*2 Displayed only when [L/O MODE] is set to [SUB.W].
ENGLISH |
JS_JVC_KD_AR959_J_ff_EN.indd 19
19
20/10/2014 2:47:31 PM
AUDIO SETTINGS
HPF *3
OFF: All signals are sent to the front/rear speakers. ; LOW 100Hz /
MID 120Hz / HIGH 150Hz: Audio signals with frequencies lower than
100 Hz/ 120 Hz/ 150 Hz are cut off from the front/rear speakers.
FADER*4 *5
R06 — F06 (00): Adjusts the front and rear speaker output balance.
BALANCE *4
L06 — R06 (00): Adjusts the left and right speaker output balance.
VOL ADJUST
–05 — +05 (00): Presets the volume adjustment level of each source
(compared to the FM volume level). Before adjustment, select the source
you want to adjust. (“VOL ADJ FIX” appears if FM is selected.)
AMP GAIN
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ; HIGH POWER: The maximum volume level is 50.
D.T.EXP
(Digital Track
Expander)
ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ; OFF: Cancels.
L/O MODE *6
SUB.W / REAR: Selects whether rear speakers or a subwoofer are
connected to the REAR/SW line out terminals on the rear panel (through an
external amplifier).
*3
*4
*5
*6
For KD-AR959BS / KD-R950BT / KD-R85MBS / KD-AR855BT.
This adjustment will not affect the subwoofer output.
If you are using a two-speaker system, set the fader level to [00].
For KD-R950BT / KD-R850BT.
DISPLAY SETTINGS
KD-AR959BS / KD-R950BT
KD-R85MBS / KD-AR855BT / KD-R850BT
1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat step 2 until the desired item is selected.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
Default: XX
DISPLAY
DIMMER
Selects the display and button illumination adjusted in the [BRIGHTNESS]
setting.
AUTO: Changes between the day and night adjustments when you turn off
or on the car headlights. *1 ; ON: Selects the night adjustments. ; OFF: Selects
the day adjustments.
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and night
separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone for setting. ( Illustration above)
3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15)
SCROLL *2
ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at
5-second intervals. ; OFF: Cancels.
*1 The illumination control wire connection is required. ( 27, 28)
*2 Some characters or symbols will not be shown correctly (or will be blanked).
20
JS_JVC_KD_AR959_J_ff_EN.indd 20
20/10/2014 2:47:43 PM
DISPLAY SETTINGS
Default: XX
COLOR (for KD-AR959BS / KD-R950BT)
PRESET
You can select a color for [ALL ZONE], [ZONE 1], [DISP ZONE], or
[ZONE 2] separately. For [ALL ZONE], you can also select a color pattern.
Default color:
ALL ZONE: [COLOR 06], ZONE 1: [COLOR 06],
DISP ZONE: [COLOR 01], ZONE 2: [COLOR 27]
1 Select a zone for setting. ( 20)
2 Select a color for the selected zone.
• COLOR 01 to COLOR 29
• USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• COLOR FLOW 01 to COLOR FLOW 03: Color changes at different
speeds.
• SPECTRUM/ GROOVE/ TECHNO/ EMOTION/ RELAX/
NIGHT SWEEP: The selected color pattern is shown.* (Selectable
only when [ALL ZONE] is selected in step 1.)
* If one of these color pattern is selected, the [ZONE 1], [DISP ZONE],
[ZONE 2] illumination color will change to the default color.
DAY COLOR
NIGHT COLOR
COLOR GUIDE
Store your own day and night colors for different zone.
1 Select a zone for setting. ( 20)
2 RED / GREEN / BLUE: Select a primary color.
3 00 to 31: Select the level.
Repeat steps 2 and 3 for all the primary colors.
• Your setting is stored to [USER] in [PRESET].
• If [00] is selected for all primary colors for [DISP ZONE], nothing
appears on the display.
MORE INFORMATION
About discs and audio files
• This unit can only play the following CDs:
• This unit can play back multi-session discs; however, unclosed sessions will be skipped
during playback.
• Unplayable discs:
- Discs that are not round.
- Discs with coloring on the recording surface or discs that are dirty.
- Recordable/ReWritable discs that have not been finalized.
- 8 cm CD. Attempting to insert using an adapter may cause malfunction.
• DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with the “Compact
Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product
cannot be recommended.
• Playable files:
- File extensions: MP3 (.mp3), WMA (.wma)
- Bit rate: MP3: 8 kbps — 320 kbps
WMA: 32 kbps — 192 kbps
- Sampling frequency:
MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz
WMA: 8 kHz — 48 kHz
- Variable bit rate (VBR) files.
• Maximum number of characters for file/folder name:
It depends on the disc format used (includes 4 extension characters—<.mp3> or
<.wma>).
- ISO 9660 Level 1 and 2: 32 characters
- Romeo: 32 characters
- Joliet: 32 characters
- Windows long file name: 32 characters
ON: Changes the button, display and USB input terminal illumination
when settings are performed on menu and list search. Display zone will
automatically change depending on volume level. ; OFF: Cancels.
[NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car’s
headlight.
ENGLISH |
JS_JVC_KD_AR959_J_02_EN.indd 21
21
12/3/2013 10:33:08 AM
MORE INFORMATION
About USB devices
About Pandora
•
•
•
•
This unit can play MP3/WMA/WAV files stored on a USB mass storage class device.
You cannot connect a USB device via a USB hub.
Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
The maximum number of characters for:
- Folder names: 64 characters
- File names: 64 characters
- MP3 Tag: 64 characters
- WMA Tag: 64 characters
- WAV Tag: 64 characters
• This unit can recognize a total of 20 480 files, 999 folders (999 files per folder including folder
without unsupported files), and of 8 hierarchies.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
• Pandora is available only in the U.S., Australia and New Zealand.
• Because Pandora is a third-party service, the specifications are subject to change without
prior notice. Accordingly, compatibility may be impaired, or some or all of the services may
become unavailable.
• Some functions of Pandora cannot be operated from this unit.
• For issues using the application, please contact Pandora at [email protected]
About iPod/iPhone
About JVC Playlist Creator and JVC Music Control
• Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5
• It is not possible to browse video files on the “Videos” menu in [HEAD MODE].
• The song order displayed on the selection menu of this unit may differ from that of the iPod/
iPhone.
• If some operations are not performed correctly or as intended, visit:
<http://www.jvc.net/cs/car/>.
• This unit supports the PC application JVC Playlist Creator and AndroidTM application JVC Music
Control.
• When you play audio file with song data added using the JVC Playlist Creator or JVC Music
Control, you can search for audio file by Genres, Artists, Albums, Playlists, and Songs.
• JVC Playlist Creator and JVC Music Control are available from the following web site:
<http://www.jvc.net/cs/car/>.
About iHeartRadio
• iHeartRadio® is a third-party service, therefore the specifications are subject to change
without prior notice. Accordingly, compatibility may be impaired or some or all of the
services may become unavailable.
• Some iHeartRadio® functionality cannot be operated from this unit.
About Bluetooth
• Depending on the Bluetooth version of the device, some Bluetooth devices may not be able
to connect to this unit.
• This unit may not work with some Bluetooth devices.
• Signal conditions vary, depending on the surroundings.
• For more information about Bluetooth, visit the following JVC website:
<http://www.jvc.net/cs/car/>.
22
JS_JVC_KD_AR959_J_02_EN.indd 22
12/3/2013 10:33:10 AM
MORE INFORMATION
Change the display information
Symptom
Press DISP repeatedly.
FM or AM
CD or USB
TROUBLESHOOTING
Station name (PS)*1 Frequency Program type (PTY)*1*2
Day/Clock (back to the beginning)
*1 For FM Radio Broadcast Data System stations only.
*2 If unavailable, “NO PTY” / “NO TEXT” appears.
Title*1*2
Playing time Day/Clock Disc name*3 Album title/Artist*4 Track
title*5 Folder/file name*6 (back to the beginning)
*3 Only for CD-DA: If not recorded, “NO NAME” appears.
*4 Only for MP3/WMA/WAV files: If not recorded, “NO NAME” appears.
*5 If not recorded, “NO NAME” appears.
*6 Only for MP3/WMA/WAV files.
USB-IPOD
Playing time Day/Clock Album title/Artist*7
the beginning)
*7 If not recorded, “NO NAME” appears.
PANDORA
Station name Album title/Artist
(back to the beginning)
IHEART
Station name Track title*8 Track Artist*8
beginning)
*8 If unavailable, station name appears.
Track title
Track title*7
Playing time
Day/Clock
(back to
Day/Clock
(back to the
SiriusXM
Channel no./Channel name B Artist B Song title B Content information B
Category name B Day/Clock B (back to the beginning)
AUX
AUX
BT AUDIO
Playing time Day/Clock Album title/Artist*9
the beginning)
*9 If not recorded, “NO NAME” appears.
Day/Clock
Track title*9
(back to
Sound cannot be heard.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHK WIRING
THEN RESET UNIT” /
“WARNING CHK WIRING THEN
RESET UNIT” appears and no
operations can be done.
Check to be sure the terminals of the speaker wires are
insulated properly, then reset the unit. If this does not
solve the problem, consult your nearest service center.
Source cannot be selected.
Check the [SRC SELECT] setting. ( 4)
Radio reception is poor. /
Static noise while listening to
the radio.
• Connect the antenna firmly.
• Pull the antenna out all the way.
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers, and
a limited number of symbols.
“PLEASE” and “EJECT” appear
alternately.
Press , then insert the disc correctly.
“IN DISC” appears.
Make sure nothing is blocking the loading slot when you
eject the disc.
Disc cannot be ejected.
Press and hold to forcibly eject the disc. Be careful not
to drop the disc when it is ejected.
Playback order is not as
intended.
The playback order is determined by the file name (USB) or
the order in which files were recorded (disc).
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears and
track skips.
Check whether the track is a playable format.
( 21)
ENGLISH |
JS_JVC_KD_AR959_J_02_EN.indd 23
23
12/3/2013 10:33:10 AM
TROUBLESHOOTING
Symptom
“CANNOT PLAY” flashes
and/or connected device
cannot be detected.
Remedy
Symptom
• Check whether the connected device is compatible with this
unit and ensure the files are in supported formats. ( 21)
• Reattach the device.
iHeartRadio
• Check the connection between this unit and iPod/iPhone.
• Detach and reset the iPod/iPhone using hard reset.
“ADD ERROR”
“SEARCH ERR”
New station creation is unsuccessful.
“CHK DEVICE”
Check the Pandora application on your device.
“NO SKIPS”
The skip limit has been reached.
“NO STATIONS”
No stations are found.
“STATION LIM”
The number of registered stations has reached its limit. Retry
after deleting unnecessary stations from your device.
“NO SKIPS”
The skip limit has been reached. Retry later.
“NO STATIONS”
No stations are found.
“NOT CONNCTD”
Link to the application is impossible.
“UPDATE APP”
Make sure you have installed the latest version of the iHeart
Link for JVC application on your device.
“PLS LOGIN”
You haven’t log in. Log in again.
“STATION NOT
AVAILABLE”
Broadcast from the station is over.
“STATION NOT
SELECTED”
No station is selected.
“STREAM ERR”
Broadcast data is interrupted.
“THUMBS ERR”
Registration of Thumbs Up/Down has failed.
“TIMED OUT”
The request has resulted in time-out.
“UPGRADE APP”
Make sure you have installed the latest version of the Pandora
application on your device.
“CH LOCKED”
The selected channel is locked. Enter the correct pass code to
unlock. ( 12)
“CONNECT ERR”
Communication is unstable.
“CHAN UNSUB”
“RATING ERR”
Registration of thumbs up/thumbs down has failed.
The selected channel is unsubscribed.
Call 1-866-635-2349 or 1-877-438-9677 to subscribe.
“LICENSE ERR”
You try to access from a country which Pandora is not
deliverable.
“CH UNAVAIL”
The selected channel is unavailable.
“CHK ANTENNA”
Check the antenna and its connection are in good condition.
“CHECK TUNER”
Make sure the SiriusXM Vehicle Tuner is connected to the unit.
“NO SIGNAL”
Make sure the antenna is mounted outside the vehicle.
SiriusXM® Radio
Pandora
The iPod/iPhone does not
turn on or does not work.
iHeartRadio
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
Remedy
Station cannot be
selected.
If “Explicit Content” in [Account Settings] is checked in
the web version of iHeartRADIO, custom stations become
unavailable.
“CREATE ERR”
Custom station name creation is unsuccessful.
“SUBSCRIPTN UPDATED
– ENTER TO CONTINUE”
Your subscription is updated. Press the volume knob to
continue.
“SAVE ERROR”
Addition to the favorite category failed.
“WRONG CODE”
Make sure you have entered the correct pass code. ( 12)
“DISCONNCTED”
Check the connection to the device.
24
JS_JVC_KD_AR959_J_04_EN.indd 24
12/10/2013 11:30:51 AM
TROUBLESHOOTING
Bluetooth®
Remedy
No Bluetooth device
is detected.
• Search from the Bluetooth device again.
• Reset the unit. ( 3)
Pairing cannot be
made.
• Make sure you have entered the same PIN code to both the
unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 13)
“PAIRING FULL”
appears.
The number of registered devices has reached its limit. Retry
after deleting an unnecessary device. ( 17, DELETE PAIR)
“PLEASE WAIT”
appears.
The unit is preparing to use the Bluetooth function. If the
message does not disappear, turn off and turn on the unit,
then connect the device again.
“BT DEVICE NOT
FOUND” appears.
The unit failed to search for the registered Bluetooth devices
during [AUTO CNNCT]. Turn on Bluetooth from your device
and connect manually. ( 17)
Echo or noise occurs.
• Adjust the microphone unit’s position. ( 13)
• Check the [ECHO CANCEL] setting. ( 15)
Phone sound quality
is poor.
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
“NOT SUPPORT”
appears.
The connected phone does not support Voice Recognition
feature.
“ERROR” appears.
Try the operation again. If “ERROR” appears again, check if
the device supports the function you have tried.
Symptom
The unit does not respond
when you try to copy the
phonebook to the unit.
Bluetooth®
Symptom
Remedy
You may have tried to copy the same entries (as
stored) to the unit. Press DISP or G PTY to
exit.
Sound is being interrupted or
skipped during playback of a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Turn off, then turn on the unit and try to connect
again.
• Other Bluetooth devices might be trying to connect
to the unit.
The connected Bluetooth
audio player cannot be
controlled.
• Check whether the connected Bluetooth audio
player supports Audio/Video Remote Control Profile
(AVRCP). (Refer to the instructions of your audio
player.)
• Disconnect and connect the Bluetooth player again.
“H/W ERROR” appears.
Reset the unit and try the operation again. If “H/W
ERROR” appears again, consult your nearest service
center.
“BT ERROR PLS UPDATE”
appears.
Update the Bluetooth firmware. ( 4)
If you have any troubles, try the following:
1 Check TROUBLESHOOTING
2 Reset the unit ( 3)
3 Contact (USA only)
Call: 1-800-252-5722 ( or ) visit: http://www.jvc.com
ENGLISH |
JS_JVC_KD_AR959_J_04_EN.indd 25
25
12/10/2013 12:07:28 PM
INSTALLATION / CONNECTION
Warning
• The unit can only be used with a 12 V DC power supply, negative ground.
• Disconnect the battery’s negative terminal before wiring and mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the car
chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after installation.
Installing the unit (in-dash mounting)
Do the required wiring.
( 27, 28)
Caution
• For safety’s sake, leave wiring and mounting to professionals. Consult the
car audio dealer.
• Install this unit in the console of your vehicle. Do not touch the metal parts
of this unit during and shortly after use of the unit. Metal parts such as the
heat sink and enclosure become hot.
• Do not connect the wires of speakers to the car chassis or Ground wire
(black), or connect them in parallel.
• Connect speakers with a maximum power of more than 50 W. If the
maximum power of the speakers is lower than 50 W, change the
[AMP GAIN] setting to avoid damaging the speakers. ( 20)
• Mount the unit at an angle of less than 30º.
• If your vehicle wiring harness does not have the ignition terminal, connect
Ignition wire (red) to the terminal on the vehicle’s fuse box which provides
12 V DC power supply and is turned on and off by the ignition key.
• After the unit is installed, check whether the brake lamps, blinkers, wipers,
etc. on the car are working properly.
• If the fuse blows, first make sure the wires are not touching car’s chassis,
then replace the old fuse with one that has the same rating.
Basic procedure
1 Remove the key from the ignition switch, then
disconnect the
terminal of the car battery.
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
Dashboard of
your car
Bend the appropriate tabs to
hold the sleeve firmly in place.
When installing without the
mounting sleeve
How to remove the unit
Use only the specified screws. Using wrong
screws might damage the unit.
Flat or round head screws
(not supplied)
M5 × 8 mm (M5 × 3/8")
2 Connect the wires properly.
See Wiring connection. ( 27, 28)
3 Install the unit to your car.
See Installing the unit (in-dash mounting).
4 Connect the terminal of the car battery.
5 Reset the unit. ( 3)
Pocket
Bracket (not supplied)
26
JS_JVC_KD_AR959_J_02_EN.indd 26
11/25/2013 5:55:46 PM
Wiring connection
(for KD-AR959BS / KD-R85MBS)
Signal cord (not supplied)
Rear output
JVC Amplifier
Front output
Subwoofer output
MIC (Microphone input
terminal) ( 13)
Fuse (10 A)
Vehicle dashboard
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 11)
Factory wiring
harness (vehicle)
To the steering
wheel remote
control adapter
Recommended
connection
Blue: To power antenna
Blue/white: To amplifier
Vehicle-specific Wiring
Harness (separately
purchased)
Antenna terminal
Light blue/yellow
Remote wire
(not supplied)
STEERING
WHEEL
REMOTE
Join the same color wires together.
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
(Not used) Insulate to prevent short circuit
Ignition switch
Yellow: Battery 12 V
Red: Ignition 12 V
For more information:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
Black: Ground
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
Green/black
Purple: Rear speaker (right)
Purple/black
Car fuse block
Separate
red wire
Make this connection if your
vehicle factory wiring harness
does not have “12 V ignition
switch” wire.
ENGLISH |
JS_JVC_KD_AR959_J_ff_EN.indd 27
27
20/10/2014 2:47:58 PM
Wiring connection (for KD-R950BT / KD-AR855BT / KD-R850BT)
KD-AR855BT
KD-R950BT / KD-R850BT
Rear output
Part list for
installation
Signal cord (not supplied)
JVC Amplifier
Front output
Front output
(A) Faceplate
Rear/subwoofer output
Subwoofer output
Fuse (10 A)
Remote wire
(not supplied)
Vehicle dashboard
(B) Trim plate
Factory wiring
harness (vehicle)
To the steering
wheel remote
control adapter
Recommended
connection
Blue: To power antenna
Blue/white: To amplifier
Vehicle-specific Wiring
Harness (separately
purchased)
Antenna terminal
Light blue/yellow
Microphone input
jack ( 13)
STEERING
WHEEL
REMOTE
(C) Mounting sleeve
Join the same color wires together.
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
(Not used) Insulate to prevent short circuit
Ignition switch
Yellow: Battery 12 V
(D) Wiring harness
Red: Ignition 12 V
For more information:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
Black: Ground
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
Green/black
Purple: Rear speaker (right)
Purple/black
Car fuse block
Separate
red wire
Make this connection if
your vehicle factory wiring
harness does not have
“12 V ignition switch” wire.
(E) Extraction key
28
JS_JVC_KD_AR959_J_02_EN.indd 28
11/25/2013 5:55:47 PM
USB
CD player
Laser Diode
Digital Filter (D/A)
Spindle Speed
Wow & Flutter
Frequency Response (±1 dB)
Total Harmonic Distortion (1 kHz)
Signal-to-Noise Ratio (1 kHz)
Dynamic Range
Channel Separation
GaAIAs
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.01 %
105 dB
90 dB
85 dB
MP3 Decode
WMA Decode
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
USB Standard
Compatible Devices
File System
Maximum Supply Current
MP3 Decode
WMA Decode
WAV Decode
USB 1.1, USB 2.0 (Full speed)
Mass storage class
FAT12/ 16/ 32
DC 5 V 1 A
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
Linear-PCM
Bluetooth
Channel Space Selection
Usable Sensitivity (S/N = 20 dB)
Frequency Response (±3 dB)
Input Maximum Voltage
Input Impedance
Audio
Channel Space Selection
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity (DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
AM Frequency Range
87.9 MHz to 107.9 MHz (200 kHz step)
87.5 MHz to 108.0 MHz (50 kHz step)
50 kHz/200 kHz
8.2 dBf (0.71 μV/75 Ω)
17.2 dBf (2.0 μV/75 Ω)
30 Hz to 15 kHz
64 dB
40 dB
530 kHz to 1 700 kHz (10 kHz step)
531 kHz to 1 611 kHz (9 kHz step)
9 kHz/10 kHz
29 dBμ (28.2 μV)
20 Hz — 20 kHz
KD-AR959BS / KD-R950BT: 1 000 mV
KD-R85MBS / KD-AR855BT / KD-R850BT:
1 200 mV
30 kΩ
Version
Frequency Range
Output Power
Maximum Communication Range
Profile
Bluetooth Ver.2.1+EDR
2.402 GHz — 2.480 GHz
+4 dBm (MAX), 0 dBm (AVE) Power Class 2
Line of sight approx. 10 m
HFP1.5 (Hands-Free Profile), A2DP (Advanced
Audio Distribution Profile), AVRCP1.3 (Audio/
Video Remote Control Profile), OPP (Object
Push Profile), PBAP (Phonebook Access
Profile), SPP (Serial Port Profile)
Maximum Output Power
Full Bandwidth Power
(at less than 1 % THD)
Speaker Impedance
Preout Level/Load (CD)
50 W × 4
22 W × 4
Preout Impedance
General
TUNER
FM Frequency Range
Auxiliary SPECIFICATIONS
Operating Voltage
(10.5 V — 16 V allowable)
Maximum Current Consumption
Operating Temperature Range
Installation Size (W × H × D)
Weight
4 Ω — 8 Ω
KD-AR959BS / KD-R85MBS / KD-AR855BT:
4 800 mV/10 kΩ load
KD-R950BT / KD-R850BT:
2 500 mV/10 kΩ load
≤ 600 Ω
14.4 V
10 A
0°C to +40°C
182 mm × 53 mm × 158 mm
(7-3/16" × 2-1/8" × 6-1/4")
1.2 kg (2.65 lbs)
Subject to change without notice.
ENGLISH |
JS_JVC_KD_AR959_J_ff_EN.indd 29
29
20/10/2014 2:48:11 PM
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• Lightning is a trademark of Apple Inc.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.
• iHeartRadio® is a registered mark of Clear Channel Broadcasting, Inc. in the United States and other countries. Such marks are used under license.
• Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved.
• Android is trademark of Google Inc.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and
trade names are those of their respective owners.
© 2013 JVC KENWOOD Corporation
JS_JVC_KD_AR959_J_C001B.indd 2
1213DTSMDTJEIN
11/11/2014 12:26:35 PM
WHEN IT IS NOT REQUIRED
TO DETACH THE FRONT CONTROL
PANEL FROM THE MAIN UNIT,
USE THE PROVIDED SCREW TO
ATTACHTH ECONTROL PANELTO
THE MAIN UNIT.
GE40401-001A
CANADA
.JVC
JVC CANADA INC.
WARRANTY
GARANTIE
Warranty applies only to PRODUCT distributed in Canada by JVC Canada Inc.
Lagarantls' applique seulement aux PRODUITSdistrlbues au Canada par JVCCanada Inc.
JVC CANADA INC. (hereafter called "JVC") gives the following express warranty for each new JVC product distributed in
Canada by JVC and sold by an authorized JVC dealer. JVC warrants that this JVC product is free, under normal use and
maintenance, from any defects in material and workmanship subject to the following terms and conditions:
1. To Obtain Warranty Service:
3. Standards:
(a) JVCproduct requiring servicemust be presented together
If any defects should be found in aJVC product within the
with proof of purchase.
applicable terms, necessary repairs shall be made at no cost to
(b) The JVC product must be brought in for service to an
the purchaser for parts or labour when JVC acknowledges that
authorized JVC Service Centre.
such defects are due to faulty material or workmanship.
2. Limitation:
This Warranty shall not apply to:
(a) Repair or replacement of any cabinets, batteries, plates.
connection cords. antennas. dust covers, knobs, speaker
grills, speaker cones, projection screens, projection screen
savers, and all accessories.
(b) Any defects caused or repairs required as a result of
misuse, abusive operation, negligence, improper use and/or
insufficient care.
(c) Any defect caused or repairs required as a result of not
following the instructions in the operation manual.
(d) Any JVC product tampered with, adjusted or repaired by
any party other than JVC or authorized JVC Service Centre
personnel.
(e) Any JVC products on which the serial number has been
defaced, modified or removed.
(f) Maintenance, cleaning or periodic check-up
(g) Conversion to foreign or domestic voltage or frequency.
(h) Any JVC product without the Canadian Electrical Safety
Regulations ID.
(i) Any JVCproducts used for commercial or institutional,
rental. or display purposes.
Parts ...... 1 year (except video head - 90 days)
Labour ... 90 days
(j) Any JVCproduct which has been resold and no longer owned
by the original purchaser.
(k) Product purchased from ·outside Canada", "bankruptcy" or
' liquidator'.
(I) Any defects caused by fire. llood, lightning, power surge, or
other events beyond the control of JVC.
(m)FOR AUTO PRODUCTS
Warranty does not cover elimination of car static or electrical
interferences. cleaning of head, adjustments. or labour cost
for the removal or reinstallation of the unit for repair.
4. Exclusion of All Other Express Warranties:
This warranty constitutes the entire express warranty given by
JVC for JVC products and no dealer or service centre personnel
or his, its or their agent or employee is, or are authorized to
extend or enlarge this warranty on behall of JVC.
5. Disclaimer of Consequential Damage:
To the extent the law permits JVC disclaims any responsibility
for loss of time or use of its product, transportation costs,
or any other indirect, incidental or consequential damage or
inconvenience.
WARRANTY TERM (VALID FROM THE DATE OF PURCHASE)
Product
Projection TV In-Home Service
Colour TV In-Home (25" and above)
D-ILA Rear Projection In-Home Service
LCD TV In-Home Service (25" and above)
Parts
(Years)
Labour
(Years)
1
1
* In-Home service to be provided where available.
Where it is not available. the purchaser must assume the
responsibility and expense for the proper packing, shipment
and all costs associated with the delivery of the equipment to
and from the closest JVC Authorized Service Centre.
Receivers and Home Speakers purchased
separatel y. Front Projection and Car
Audio "ARSENAL" Series
AC Adapters. Remote controls.
Headphones. Microphones and Projector
lamps
2
2
90 days 90 days
Wood Cone Speakers
5
5
All Other Categories
1
1
JVC CANADA INC. ( ci-apres appele "JVC") en once Ia garantie expresse suivante pour tout nouveau produit JVC distribue
au Canada par JVC et vendu par un detaillant JVC autorise. JVC vous garantit que ce produit est degage, so us utilisation et
entretien normal, de tout defaut materiel et de fabrication sous reserve des modalites et conditions suivantes:
1. Pour obtenir un service de garantie:
(a) Les produits JVC necessitant un service doit @
tre presentee
avec Ia prevue d'achat.
(b) Leproduit JVC doit etre apporte pour service chez un centre
de service JVC autorise.
2. Restrictions:
Cette garantie ne s'applique pasaux:
(a) Reparation ou remplacement de lout cabinet, batteries,
panneau avant. cordons de raccord. antennes. housses
de protection, boutons. couverts de hautparleur. cOnes de
hautparleur. ecrans de projection, protecteurs d'ecran de
projection et tous les accessoires.
(b) Taus defauts occasionnes ou reparations requises suiteaune
utilisation abusive, mauvaise. negligente et/ou une utilization
incorrecte.
(c) Taus defauts occasionnes ou reparations requises suite
a!'omission de suivre les recommandations du manuel
d'instruction.
(d) Tout produitJVC altere. ajusteou repare par tout autre
entreprise queJVC ou un centre de service d'entretien ou de
service autorise JVC.
(e) Tout produit JVC dont le numero de serie a lite altere, modilie
ou enleve.
(f) l:entretien, les verifications period iques et nettoyage.
(g) La conversion aune frequence ou une tension etrangere ou
domestique.
(h) Tout produit JVC n'ayant pas le signe d'identification qui
conforme aux norms electriques Canadiennes (CSA).
(i) Pour tout produit utilise ades fins commerciales,
institutionnelles, de location ou utiliseades fins d'etalage.
Pieces ... ............ 1 An (Excepte les teles video- 90 jours)
Main d'oeuvre ... 90 Jours
(j) Tout produit JVCayant ete revendu et qui n'est plus Ia
propriete de l'acheteur original.
(k) Produit achete a"l'exterieur du Canada". provenant d'une
"fail lite" ou d'un "liquidateur".
(I) Tout dommagecause par le feu, une inondation. un eclair.
une surtension ou tout autreevenement hors du contr61ede
JVC.
JVC CANADA INC.
6070 kestrel Road , Missisauga, Ontario, L5T 1 SB Canada
TEL: (905) 670-3381 FAX: (905)670-7244 Service toll free#: 1-800-964-2650
http://www.jvc.ca E-mail: [email protected]
Product Registration
We suggest that you register your product since it will enable us to contact you directly if it is ever necessary to correct a safety related
condition in your product. You can register at http://www.jvc.ca/www/Support/Warranty.aspx
For customer use:
Enter below the Model No. and Serial No. which is located either on the rear, bottomor side of the cabinet. Retain this information for future
reference.
Model No.:
Serial No.:
Purchase date:
Name of dealer:
(m)POURLESPRODUITS D'AUTOMOBILE
La garantiene couvre pas !'elimination d'interferences
statiques ou electriques de Ia voiture, le nettoyagede tete.
les ajustements et les coOts de main d'ceuvreassocies a
l'enlevement ou aIa reinstallation de I' unite pour reparation.
3. Criteres:
Si un produit JVCs'averait defectueux. seton les conditions
applicables, les reparations necessaires seront effectues
sans coOts additionnels al'acheteur pour les pieces et Ia main
d'ceuvre lorsqueJVC reconnait que detells defectuosites sont
causees par une defectuosite de materiel ou de fabrication.
4. Exclusion de foutes autres garanties expresses :
Cette garantieconstitue l'entiere garantieexpress donnee par
JVC pour les produits JVC. Nul representant ou employe d'un
detailIant ou d'un service d'entretien n'est autorise aprolonger
cette garantie au nom de JVC.
5. Denegation des dommages indirects:
Dans Ia mesurepermise par Ia loi, JVC nietoute responsabilite
pour perte de temps ou d'usage de ses produits. des coots de
transport outout autredommage ou inconvenient indirect,
accidentel et consequent.
CONDITIONS DE GARANTIE (VALABLE aPARTIR DE LA DATE D'ACHAT)
Produit
Pieces
I (Annees)
Main-O'oeuver
(Annees)
~crans de projection Service aDomicile
Ecrans de TV Couleur ServiceaDomicile(25" et plus)
1
1
TVprojection arriere D-ILA Service aDomicile
Ecrans de LCDService aDomicile(25" et plus)
* Service adomicile fourni par un detaillant disponible.
S'il n'yapas deserviceJVC disponibleaproximite, l'acheteur doit assumer
Iaresponsabiliteet les coOtspour un emballageadequat, l'expedition. ainsi
quetous les coOts associesaIalivraison de l'equipement chez et depuis le
detaillant JVC autorise leplus pres pour un service d'entretien.
Recepteurs et Hauts-Parleurs achetes
separement, Projecteur Avant et Audio d'Auto
2
2
de Serie "ARSENAL"
Adaplateurs AC, Telecommande, Casque
D'ecoute, Microphones et Lampede Projecteur 90 Jours 90 Jours
EnceinteaC6ne en Bois
5
5
Toutes les autres cateqories
1
1
JVC CANADA INC.
6070 kestrel Road, Missisauga, Ontario. L5T 1 SB Canada
TEL: (905) 670-3381 FAX: (905)670-7244 Service toll free#: 1-800-964-2650
http://www.jvc.ca E-mail: [email protected]
Enregistrement du prodult
Nous vous conseillons d'enregistrer votre produit, car il nous permettra de vous contacter directement si jamais elle est necessaire pour
corriger un probleme lieaIa securite de votre produit. Vous pouvez vous inscrire ahttp://www.jvc.ca/www/Support/Warranty.aspx
Pour l'utlllsalion des clients:
Entrez ci-dessous le numero de modele et le numero de serie qui se trouve soil al'arriere. en bas ou sur le cote de !'armoire. Conservez ces
informations pour reference future.
No. de modele:
No. de serie:
Date d'achat:
Nom du revendeur:
JVC AMERICAS CORP.
U.S.A.
TO OUR VALUED CUSTOMER
THANK YOU FOR PURCHASING THIS JVC PRODUCT.
WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE.
NEED HELP ON HOW TO HOOK UP?
NEED ASSISTANCE ON HOW TO OPERATE?
NEED TO LOCATE A JVC SERVICE CENTER?
LIKE TO PURCHASE ACCESSORIES?
JVC IS HERE TO HELP!
TOLL FREE: 1 (800)252-5722
http ://www.jvc.com
Remember to retain your Bill of Sale for Warranty Service.
Do not attempt to service the product yourself
Caution
To prevent electrical shock, do not open the cabinet.
There are no user serviceable parts inside.
Please refer to qualified service personnel for repairs.
.JVC
LIMITED WARRANTY
ONLY FOR PRODUCT PURCHASED IN U.S.A.
JVC Americas Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL
RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original pu rchase for
the period shown below. ("The Warranty Period")
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AN D IN THE
COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective within thewarranty period, JVCwill repair or replace defective parts with new or rebuilt equivalents at no
charge to the original owner. Such repair and replacement services shall be rendered by JVCduring normal business hours at JVC authorized
service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products may be brought to a JVC
authorized service center on a carry-in basis. Color televisions with ascreen size of 37"classor greater qualify for in-home service. In such
cases. atechnician will come to your home and either repair the TV there or remove and return it if it cannot be repaired inyour home.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Please do not return your product to the retailer. Instead, return your product to the JVC authorized servicecenter nearest you. If shipping the
product tothe service center, please be sure to package it carefully, preferably in the original packaging, and include a brief description of
theproblem(s) and a copy of the proof of purchase to verily purchase date. Please call1-800-252-5722 to locatethe nearest JVC authorized
service center. Service locations can also be obtained fromour website htlp://www.jvc.com.lf your product qualifies for in-home service, the
service representative will require clear access to the product.
If you have any questions concerning your JVC Product, please contact our Customer Care Center at 800-252-5722
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of
reasonable care, or if repaired or serviced by anyone other than a service facility authori zed by JVC to render such service, or if affixed to
any attachment not provided withihe products. or if the model or serial number has been altered, tampered with, defaced or removed;
2. Initial installation, installation and removal from cabinets or mounting systems.
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures dueto line power surge;
6. User Removal Memory Devices/Video Pick-up Tubes/CCD Image Sensors are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
9. Products used for commercial purposes, including, but not limited to rental.
10. Loss of data resultant from malfunction of hard drive or other data storage device;
There are no express warranties except as listed above.
THE DURATION OFANY IMPLIEDWARRANTIES, INCLUDING THEIMPLIED WARR ANTY OF MERCHANTABILITY, IS LIMITEDTO
THEDURATION OFTHE EXPRESS WARRANTY HEREIN. JVCSHALL NOT BELIABLE FORANY LOSS OF USE OFTHEPRODUCT,
INCONVENIENCE, OR AN Y OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAl (INCLU DING, WITHOUT
LIMITATION, DAMAG ETOTAPES, RECORDS ORDISCS) RESULTINGFROM THEUSE OF THIS PRODUCT, OR ARISINGOUT OF ANY
BREACHOFTHISWARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES. INCLUDING THEWARRANTIES OF MERCHANTABILITYAND
FITNESS FOR PARTICULARPURPOSE, ARE LIMITED TO THEWARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts. so
these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which
vary from state to state.
JVC AMERICAS CORP.
1700 Valley Road, Wayne, New Jersey 07470
http://www.jvc.com
PRODUCT REG ISTRATION
We suggest that you register your product since it will enable us to contact you
directly if it is ever necessary to correct a safety related condition in your product.
You can register at www.register.jvc.com
Please note that failure to register does not diminish any of your rights during the
warranty period.
BT-50004-1 (0313)
REFURBISHED PRODUCTS CARRYASEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAIL OFREFURBISHED PRODUCT
WARRANTY, PLEASE REFERTOTHE REFURBISHED PRODUCTWARRAN TY INFORMATION PACKAGEDWITH EACH REFURBISHED PRODUCT.
For customer use:
Enter belowthe Model No. and Serial No. which is located either on the rear, bottom or sideof the cabinet. Retain this information for future
reference.
Model No.:
Serial No.:
Purchase date:
Name of dealer:
Printed in Indonesia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement