HellermannTyton Product Catalogue 2016/2017

HellermannTyton Product Catalogue 2016/2017
Date of issue: October 2015
Application Tooling
6.1 Automatic Cable Tying System
500
6.2 Application Tooling for Cable Ties
508
6.3 Application Tooling for
Date of issue: October 2015
Cutting Plastic Ties
526
Snappers
527
Heat Shrinkable Tubing
528
Non Shrinkable Tubing
531
Braided Sleeves
533
Identification
534
6
6.1 Automatic Cable Tying System
Manual Tensioning Tool with Plastic Housing
EVO7, EVO7SP
515
Autotool 2000 CPK
500
MK7HT
516
Accessories for Autotool 2000 CPK
501
MK9
518
Cable ties for Autotool 2000 Series
502
MK9HT
519
Automatic bundling up to Ø 20 mm
Pneumatic Tensioning Tool with Metal Housing
Automatic bundling
Bundling Clips for Automatic Cable Tying Systems
503
MK3PNSP2
514
Pneumatic Tensioning Tool with Plastic Housing
Waste free bindings up to Ø 80 mm
Autotool System 3080
504
MK7P
517
Accessories for Autotool System 3080
505
MK9P
520
Cable ties for Autotool System 3080
506
MK9PSST
522
Manual Tensioning Tool for KR-Series
KR6/8
KR8PNSE
Tool Overview for Cable Ties
508, 510
Flowchart for Optimum Tool Selection
509, 510
Technical Information
511
Manual Tensioning Tool for cable ties with low profile head
MK10-SB
513
Manual Tensioning Tool, simple version
MK20, MK 21
513
Manual Tensioning Tool with Metal Housing
MK3SP
514
MK6
518
521
Manual Tensioning Tool for Metal Ties MBT-Series
MK9SST
522
KST-STG200
523
THT
525
Manual Tensioning Tool for Metal Ties MBT-, MLT- and AMT-Series
HDT16
523
Manual Tensioning Tool for Metal Ties MST-Series
MST6
524
MST9
524
Manual Tensioning Tool for Metal Ties MLT-Series
MTT4
525
Date of issue: October 2015
6.2 Application Tooling for Cable Ties
Product Selection
How to use a cable tie tool
521
Pneumatic Tensioning Tool for KR-Series
Application Tooling
6.3 Application Tooling
for Non Shrinkable Tubing
6.3 Application Tooling for Cutting Plastic Ties
Three-Pronged Pliers for Sleeves and Grommets
Manual Cutting Tool for Plastic Ties
CUTties
526
NA
531
VA2.5/5 - Reinforced
532
K, S, SS
533
6.3 Application Tooling for Snappers
Manual Tool
ASNP, MSNP snapper tools
527
6.3 Application Tooling for Braided Sleeves
Helagaine Braided Sleeving
HSG0 hot cutting tool
6.3 Application Tooling
for Heat Shrinkable Tubing
Heat Shrink tool
ShrinkPad 110
528
529
Electrical Hot Air Tool
Date of issue: October 2015
6.3 Application Tooling for Identification
Manual Tool for Helafix HCR
Gas powered Hot Air Tool
E4500
533
H5002 - handy tool
530
H5004 - for professional use
530
Helafix HCT Application tool
534
6
Application Tooling
6.1
Automatic Cable Tying System
Automatic bundling up to Ø 20 mm
Autotool 2000 CPK
The reliability, ergonomics, simple handling and flexibility makes the
Autotool 2000 CPK ideal for a variety of high volume applications, e.g.
in cable assemblies for automotive, brown and white goods industry,
electronics, TV and domestics appliances, sealing of bags and the
bundling of parts. Overall the Autotool 2000 CPK gives full, flexible and
cost effective utilization of labour and maximises efficiency.
With the Bench Mount Kit CPK or the Overhead Suspension CPK the
Autotool 2000 CPK can be used stationary or mobile, depending on the
customer’s application.
Another option is to integrate the AT2000 CPK into a fully automated
production line by using the Power Pack with integrated Control Box,
which is the interface between the AT2000 CPK and your production line.
Features and Benefits
• Evolutionary model combining long-term customer experience
and requirements
• Electronically operated automatic bundling system
• Speeds up the bundling process
• Consistency and quality in the process of threating, tensioning
and cutting
• Bundling with flush cut off / optional with excess tail
• Several languages available
• Service Software - Extensive data analysis with included PC software
possible, Production Data Acqusition (PDA)
• Tensioning drive completely controlled and monitored electronically
• High reproducibility of the bundling results
• Adjustable cycle time settings between 0.8 - 1.4 sec.
• Removable handle for full automation
• Troubleshooting via menu navigation
Autotool 2000 CPK.
AT2000 CPK Service Software.
One Step to the Web!
TYPE
Article-No.
Power Supply
Electronically, with Power Pack CPK
Autotool 2000 CPK
106-00000
Cycle Time
adjustable 0.8 sec to 1.4 sec.
Weight
1.8 kg
Tension Force
adjustable
Subject to technical changes.
500
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
Power Pack for Autotool 2000 CPK.
Application Tooling
Automatic Cable Tying System
6.1
Automatic bundling up to Ø 20 mm
Accessories for Autotool 2000 CPK
Features and Benefits
• Supports the main features of the Autotool 2000 CPK
• Power Pack - Input 100-240 V a.c. 50/60 Hz; Output 25,2 V d.c.,
max. 150 W
• Bench Mount Kit CPK for stationary usage
• Overhead Suspension CPK for flexible usage
• Power Pack CPK with Control Box for full automation usage
• Stand-off HH20 - used as a spacer for optimal bundling support
TYPE
Article-No.
Bench Mount Kit CPK
106-00040
Overhead Suspension CPK
106-00050
Power Pack CPK
106-00100
Power Pack CPK with Control Box
106-00110
HH20
120-00080
Subject to technical changes.
Bench Mount Kit CPK included Foot Pedal, Autotool 2000 CPK, Power Pack CPK
and T18RA3500.
Application with the Bench Mount Kit CPK.
Date of issue: October 2015
Overhead Suspension CPK, Autotool 2000 CPK, Power Pack CPK and T18RA3500.
Further information at www.HellermannTyton.com/tools
501
Application Tooling
6.1
Automatic Cable Tying System
Automatic bundling up to Ø 20 mm
Cable ties for Autotool 2000 Series
For bundling and securing cables, pipes and hoses, especially in
applications that require high volumes of cable ties, e.g. in cable
assembly, automotive, industrial equipment and the packaging sector.
Features and Benefits
• Made from 100% high quality plastic, can be easily recycled
• Provides a secure hold around bundles
• Available in natural and black
• Other colours available on request
• Bandoleers of 50 cable ties or reels of 3,500 available
Cable ties for Autotool 2000 Series.
MATERIAL
Polyamide 6.6, heat
stabilised (PA66HS)
Polyamide 6.6, heat and
UV-resistant (PA66HSW)
Operating Temperature
-40 °C to +105 °C, (+145 °C, 500 h)
-40 °C to +150 °C, (+195 °C, 500 h)
Flammability
UL94 V2
UL94 V2, Limited Fire Hazard, Low generation of toxic
gases and corrosive acid, Low smoke generation
Polyamide 4.6 (PA46)
TYPE
T18RA50
Bundle
Ø max.
20.0
80
Colour
Material
Pack
Cont.
Article-No.
Black (BK)
PA66HSW
2,000 pcs.
120-40020
20.0
80
Black (BK)
PA66HSW
3,500 pcs.
120-50010
20.0
80
Natural (NA)
PA46
3,500 pcs.
120-46009
T18RA50
20.0
80
Natural (NA)
PA66HS
2,000 pcs.
120-40019
T18RA3500
20.0
80
Natural (NA)
PA66HS
3,500 pcs.
120-50009
T18RA3500
All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content.
More colours on request. Please contact us!
Halogen-free according to the interdictions of the GADSL list and compulsory registration of the SVHC list.
502
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
Bandoleer T18RA
Application Tooling
Automatic Cable Tying System
6.1
Automatic bundling
Bundling Clips for Automatic Cable Tying Systems
Features and Benefits
• Optimized for Automatic Cable Tying Systems
• Easy to fix
Bundling Clips ATSBCFT6LG.
Harness board accessory HH20.
Panel
Thickness
Hole Ø
(FH)
Colour
Material
Article-No.
ATSBCEC35
1.5 - 4.0
-
Black (BK)
PA66HIRHS
102-68355
ATSBCSFT6.5
2.3 - 3.3
6.3 - 6.7
Black (BK)
PA66HIRHS
102-69066
ATSBCSFT6.5-MD
2.0 - 3.0
6.3 - 6.7
Black (BK)
PA66HIRHS
102-69065
ATSBCEC36
1.5 - 4.0
-
Black (BK)
PA66HIRHS
102-68365
ATSBCEC37
1.5 - 4.0
-
Black (BK)
PA66HIRHS
102-68375
ATSBCFT6LG
0.6 - 5.1
6.3 - 7.0
Black (BK)
PA66HIRHS
102-67065
ATSBCEC38
1.5 - 4.0
-
Black (BK)
PA66
102-68385
ATSBC2KSFT6,5
1.7 - 2.3
6.3 - 6.7
Black (BK)
PA66HIRHS
102-69068
ATSBCKSFT6,5
0.7 - 1.3
6.3 - 6.7
Black (BK)
PA66HIRHS
102-69067
ATSBCOWSFT6,5
2.3 - 3.3
6.3 - 6.7
Grey (GY)
PA46
102-69070
ATSBCSFT6,5PT2,3-3,3
2.3 - 3.3
6.3 - 6.7
Grey (GY)
PA46
102-69069
Date of issue: October 2015
TYPE
Drawing
All dimensions in mm. Subject to technical changes.
Further information at www.HellermannTyton.com/tools
503
Application Tooling
6.1
Automatic Cable Tying System
Waste free bindings up to Ø 80 mm
Autotool System 3080
By assembling the ATS3080 into different devices, the tool can be
customised for various customer applications. For example, with the
horizontal bench mount kit, plastic bags can be closed in seconds.
Also, because of the unique closing mechanism, the plastic tie closing
the bag can serve as a tamper evident seal and is compatible material
for recycling.
HellermannTyton developed an innovative solution for harnesses in the
Automotive industry. With the ATS3080, it is now possible to fasten
fixings, also known as foot parts, at the same time as the automatic
binding. This simplifies the final assembly of harnesses, because the
pre-assembled harness can be fixed directly to the metal edge or into
a hole! This means that you can now produce a complex harness
completely automatically.
Features and Benefits
• Electrical bundling system from HellermannTyton
• Waste free fastenings every time with a completely flush cut
• No lost time for emptying or cleaning waste boxes
• Bundling diameter up to 80 mm
• Processes outside serrated Nylon 6.6 strap and closures
on “endless reels”
• Outstanding innovation: double play between tool and material
• Usable with overhead dispenser or bench mount system
• Can be integrated into fully automated production line
• Flexible tool especially for automotive, packaging and white and
brown goods industries
• High-capacity tool
• Short cycle time (0.8 - 1.3 sec. - depending on bundle diameter)
• Jaws available in 3 different diameters: 30, 50, 80 mm
• Material available in reels of 500 m straps and 5000 pcs closures
TYPE
Article-No.
Autotool System 3080
102-00000
Autotool System 3080.
Autotool System 3080 with three Jaw sizes - to optimise the cycle time for the
different bundling diameters.
Subject to technical changes.
One Step to the Web!
504
Power Supply
Electrical, with Switching Power Pack
Cycle Time
approx. 1.3 sec. (50 mm jaw)
Weight
1.9 kg
Tension Force
Continuously adjustable
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
Switching Power Pack for ATS3080.
Application Tooling
Automatic Cable Tying System
6.1
Waste free bindings up to Ø 80 mm
Accessories for Autotool System 3080
Features and Benefits
• For stationary or mobile use of the ATS3080 in bench mount kit or
overhead dispenser
• Integrates ATS3080 into a fully automated production line
• Switching Power Pack - Input: 230/150 VAC, 50/60 Hz;
Output: 48 VDC, max. 50 W
• Bench Mount Kit - tool and tie reel stand including foot pedal
• Overhead dispenser and tie reel stand including balancer
Date of issue: October 2015
Optional: Bench Mount Kit with plate.
Packaging application with the Bench
Mount Kit Horizontal.
TYPE
Article-No.
Bench Mount Kit Automatic
102-00042
Bench Mount Kit Horizontal
102-00041
Bench Mount Kit Movable
102-00040
Overhead Suspension
102-00050
Switching Power Pack
102-00100
Subject to technical changes.
Bench Mount Kit with ATS3080, Switching Power Pack, Foot Pedal and
consumables.
Overhead Suspension with ATS3080 and consumables.
Further information at www.HellermannTyton.com/tools
505
Application Tooling
6.1
Automatic Cable Tying System
Waste free bindings up to Ø 80 mm
Cable ties for Autotool System 3080
For bundling and securing cables, hoses and pipes or closing plastic
bags. Ideal for applications where large volumes of cable ties are
required, e.g. in cable assembly, automotive, industrial equipment and
packaging sectors.
Features and Benefits
• Innovative strap and closures
• Two-piece consumable parts
• Waste-free and optimised material utilisation guaranteed
• No time lost through emptying and cleaning waste boxes
• Mechanically detected bundle diameter
• Flush cut-off of fastenings
• Outside serrated strap prevents damage to wire insulation
• Available in reels of 500 m strap and 5000 pcs closures
Closures and strap for ATS3080.
Polyamide 6.6, high impact modified,
heat and UV stabilised (PA66HIRHSUV)
MATERIAL
Polyamide 6.6, heat and UV stabilised (PA66HSUV)
Operating Temperature
-40 °C to +95 °C, (+105 °C, 5000 h)
-40 °C to +105 °C, (+145 °C, 500 h)
Flammability
UL94 HB
UL94 V2
9.0
1.2
8.0
5.4
4.5
Closure ATS3080
TYPE
Strap ATS3080
Bundle
Ø max.
Colour
Material
Pack
Cont.
Article-No.
Closures Black ATS3080
80.0
225
Black (BK)
PA66HSUV
5,000 pcs.
102-66210
Strap Black ATS3080
80.0
225
Black (BK)
PA66HIRHSUV
500 m
102-66110
Closures Natural ATS3080
80.0
225
Natural (NA)
PA66HSUV
5,000 pcs.
102-66209
Strap Natural ATS3080
80.0
225
Natural (NA)
PA66HIRHSUV
500 m
102-66109
Please find the corresponding
Bundling Clips on page 503.
506
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
Minimum Order Quantity (MOQ) may differ from package content.
Autotool 2000 – automated solutions
Date of issue: October 2015
For more information
please contact us!
Application Tooling
6.2
Product Selection
Tensioning Tools for Cable Ties
MK10-SB.
See page 513
EVO7/EVO7SP.
See page 515
MK9.
See page 518
1
MK20, MK21.
6
MK7HT.
10
MK9HT.
See page 513
See page 516
See page 519
2, 3
MK3SP.
7
MK7P.
11
MK9P.
See page 514
See page 517
See page 520
4
MK3PNSP2.
8
MK6.
See page 514
See page 518
5
9
12
Tensioning Tools for Cable Ties KR-Series
KR6/8.
13
KR8PNSE.
See page 521
14
Date of issue: October 2015
See page 521
508
Further information at www.HellermannTyton.com/tools
Application Tooling
6.2
Product Selection
Flowchart for optimum tool selection
Cable tie
Tool
Page
MK10-SB
513
MK20
513
MK10-SB
513
MK21
513
MK3PNSP2
514
MK7P
517
MK9P
520
EVO7 / EVO7SP
515
MK3SP
514
MK7HT
516
MK6
518
MK9
518
MK9HT
519
= 2.5 mm
AT2000 CPK
500
= 4.5 mm
ATS3080
504
yes
KR8PNSE
521
no
KR6/8
521
Attributes
 4.8 mm
bandwidth
no
 4.8 mm
 4.8 mm
yes
bandwidth
 4.8 mm
standard
cable ties
tool must
have
automatic
cut-off
pneumatic
 4.8 mm
yes
bandwidth
no
 4.8 mm
yes
yes
bandwidth
pneumatic
Date of issue: October 2015
cable ties KR
series
electrical
Further information at www.HellermannTyton.com/tools
509
Application Tooling
6.2
Product Selection
Tensioning Tools for Metal Ties
MK9SST.
See page 522
MST6.
See page 524
15
MK9PSST.
19
MST9.
See page 522
See page 524
16
HDT16.
20
MTT4.
See page 523
See page 525
17
KST-STG200.
21
THT.
See page 523
18
See page 525
Flowchart for optimum tool selection
Cable tie
Attributes
yes
tool must
have
automatic
cut-off
no
metal cable
ties MST
series
510
Page
yes
bandwidth
 16.0 mm
MK9PSST
522
no
bandwidth
 16.0 mm
MK9SST
522
 16.0 mm
HDT16
523
 12.3 mm
KST-STG200
523
 12.0 mm
MTT4
525
 7.9 mm
THT
525
5.9 mm
MST6
524
8.9 mm
MST9
524
pneumatic
bandwidth
bandwidth
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
standard
metal cable
ties
Tool
Application Tooling
Technical Information
6.2
How to use a cable tie tool (using an EVO7 as an example)
1. Use tension adjustment knob to
select your desired tension setting.
2. Fasten a nylon HellermannTyton
cable tie around the bundle.
3. Insert strap of cable tie through side
opening of nosepiece.
4. P lace front of nosepiece flush to the
head of the cable tie.
5. Pull trigger until cable tie tensions and cuts.
Tool testing - Determination of tensions
To date, no generally applicable test method has been established on
the market. The companies within the HellermannTyton group work
with a usual force meter with minimum 10 kHz frequency of data
sampling to determine the tensile forces of the tools and to guarantee
the quality of the tools.
It is more difficult to test cable tie tools than would appear at first
glance. It is of supreme importance to comply with a standardised test
procedure and consistent test conditions, e.g. the size and cross-section
of the cable ties and the water content of the tie. A test using different
ties and / or different conditioning can easily lead to different values.
Date of issue: October 2015
In general, the speed of cut-off, the position of the tool with respect
to the cable tie, the condition of the wearing parts in the tool and the
state of the cable tie play a fundamental role in the determination of
tensile forces.
Therefore we must point out that any values we provide must only ever
be regarded as guide values for your information. The values cannot be
transferred into practice 'one for one'.
In our user instructions, we specify an adjustment range for each type
of cable tie. If tension values must be documented or comply with a
specification, we recommend that you adjust them with the aid of the
force meter. Also, as a guideline, half the minimum holding strength of
the cable tie should be used as tensile force.
The minimum tensile strength (also referred to as minimum unlocking
strength) is the least force which the cable tie can withstand before
it tears or stretches. This strength is determined using a threaded tie,
hence the following formula should be used for guidance as to the
correct tensile force of the tool:
Min. tensile strength
=
2
rec. tensile force
Example:
225 N min. tensile strength
T50R =
2
225 N = 112.5 N rec. tensile force according to formula
2
Further information at www.HellermannTyton.com/tools
511
6.2
Application Tooling
Technical Information
The tensile force can of course be adjusted up or down, in line with the
corresponding application.
onto the device after removing the adjustment unit (loosening a screw is
all it takes to remove).
Please bear in mind that this statement applies only to HellermannTyton
products. Cable ties from other manufacturers may require a higher or
lower force setting.
After a period of time, to be defined, you test the device again and if
necessary re-adjust it. The problem of determination of forces depends
on the individual case and has no direct connection with the quality of
our product. An exact value for each setting (e. g. in Newtons), without
stating a tolerance, cannot be confirmed.
In order to secure the device against manipulation or unintentional
maladjustment after it has been adjusted using the force meter,
HellermannTyton offers an adjustment safety cap (Art. No.: 110-07200
for MK7HT, MK7P, MK9, MK9HT, MK9SST, MK9P) which you can push
Test set-up with a usual force meter and EVO7
cable tie tool.
1. Lay the cable tie (green) into the fixture (A).
2. B
ring the nose piece of the tensioning tool (B)
flush to the test block (C).
4. Re-set the force meter (D) to zero.
5. Pull the trigger of the tensioning tool continuously until the
cable tie is cut.
6. The tension force achieved at the cut off point is determined.
3. Insert the strap of the cable tie into the tensioning tool
and pull the strap flush against the fixture (A).
512
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
The following describes how to check the tension force of a manual
tensioning tool.
Application Tooling
Application Tooling for Cable Ties
6.2
Manual Tensioning Tool for Cable ties with
low profile head
MK10-SB up to 9.5 mm strap width
Features and Benefits
• Ideal for easy handling of entire HellermannTyton RPE and
PE-Series cable ties
• Tensions and cuts off pre-looped cable ties flush at the head
MK10-SB.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
9.5
2.5
0.33 kg
110-10001
MK10-SB
All dimensions in mm. Subject to technical changes.
For product specific approvals and specifications please refer to the Appendix.
Manual Tensioning Tool for Cable Ties,
simple version
MK20 up to 4.8 mm strap width
MK21 up to 7.6 mm strap width
Features and Benefits
• Lightweight, ergonomic tools
• For tensioning and cutting HellermannTyton standard cable ties
4.8 - 7.6 mm wide
• MK20 and MK21 ideal for on-site assembly
• Mounted and pre-tensioned ties are cut off by twisting the tool
Date of issue: October 2015
MK20, MK21.
Apply.
Tension.
Twist to cut.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MK20
4.8
1.5
0.05 kg
110-20006
MK21
7.6
2.5
0.05 kg
110-21016
All dimensions in mm. Subject to technical changes.
Further information at www.HellermannTyton.com/tools
513
Application Tooling
6.2
Application Tooling for Cable Ties
Manual Tensioning Tool with Metal Housing
MK3SP up to 4.8 mm strap width
This tough metal tool MK3SP is used by harness makers for the
automotive and white goods industries, as well as in aerospace,
railway and medical.
Features and Benefits
• Tough metal tool for HellermannTyton plastic cable ties
up to 4.8 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tensioning force
• Reliable and low maintenance
MK3SP.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
MK3SP
4.8
1.5
0.33 kg
110-03500
-
-
0.01 kg
110-03524
SP MK3SP replacement blade
Weight
Article-No.
All dimensions in mm. Subject to technical changes.
Pneumatic Tensioning Tool with Metal Housing
MK3PNSP2 up to 4.8 mm strap width
Features and Benefits
• Pneumatic tensioning tool
• Tough metal housing
• For cable ties up to 4.8 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force
• High application speed
• Reliable and low maintenance
MK3PNSP2.
MK3PNSP2
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.)
6 Bar
Hose Internal Diameter
4.0 mm
LxHxW
approx. 225 x 140 x 40 mm
Specifications
CE, GS
Strap Width
max. (G)
Strap Thickness
max.
Article-No.
4.8
1.5
0.56 kg
110-03400
SP compressed air hose
-
-
0.35 kg
110-30002
SP MK3PNSP2 cutting blade
-
-
0.01 kg
110-30101
All dimensions in mm. Subject to technical changes.
For product specific approvals and specifications please refer to the Appendix.
514
Weight
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
TYPE
Air Supply
Application Tooling
Application Tooling for Cable Ties
6.2
Manual Tensioning Tool with Plastic Housing
EVO7 up to 4.8 mm strap width
Features and Benefits
• Ergonomic, slip-proof handle for a comfortable and secure grip
• Extremely low maintenance
• Fast and precise application with minimum effort (TLC mechanism)
• Convenient and simple tension adjustment
• Extended, slim nose for use in narrow spaces
• Housing made of resilient and lightweight glass fibre-reinforced polyester
• Standard grip span (90 mm) and short grip span (80 mm) available
EVO7.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
EVO7
4.8
1.5
0.28 kg
110-70129
EVO7SP
4.8
1.5
0.28 kg
110-70130
-
-
-
110-70106
BLADEKT
All dimensions in mm. Subject to technical changes.
TLC-Technology: Tension – Lock – Cut
The new EVO7 protects muscles and joints and increases effectiveness
• Less recoil shock reduces impact to the operator´s hand
Date of issue: October 2015
• Application of force is significantly reduced
Application video: EVO7
1. Tension: Tie is tensioned as usual.
3. Cut: Innovative, effortless and less recoil shock cut-off function.
2. L ock: When the desired tension is met the locking mechanism locks the tie
in place.
For product specific approvals and specifications please refer to the Appendix.
Further information at www.HellermannTyton.com/tools
515
Application Tooling
6.2
Application Tooling for Cable Ties
Manual Processing Tool with Plastic Housing
MK7HT up to 4.8 mm strap width
MK7HT application tool is mainly used to apply cable ties in harness
making industries.
Features and Benefits
• Light glass-fibre-reinforced housing
• Ergonomic design
• For cable ties up to 4.8 mm width
• MK7 HighTension version with higher tension force than MK7
• Consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force combined with three-step quick
adjustment
MK7HT.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MK7HT
4.8
1.5
0.29 kg
110-07000
SP MK7HT replacement blade
-
-
0.01 kg
110-07511
SP lock cap tensioning knob
-
-
0.01 kg
110-07200
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
516
Further information at www.HellermannTyton.com/tools
Application Tooling
Application Tooling for Cable Ties
6.2
Pneumatic Tensioning Tool with Plastic Housing
MK7P up to 4.8 mm strap width
The MK7P pneumatic bundling tool sets a new benchmark for the
rational application of ties in the industrial production process. Improved
compressed air supply moves the tensioning piston faster than in
comparable tools.
Features and Benefits
• Pneumatic tensioning tool
• Light glass-fibre-reinforced housing
• For cable ties up to 4.8 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force
• High application speed
MK7P.
Date of issue: October 2015
The easy to use quick-set-knob.
Air Supply
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.)
6 Bar
Hose Internal Diameter
4.0 mm
LxHxW
approx. 220 x 170 x 40 mm
Specifications
CE, GS
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MK7P
4.8
1.5
0.43 kg
110-07100
SP compressed air hose
-
-
0.35 kg
110-30002
SP MK7P replacement blade
-
-
0.01 kg
110-07111
SP lock cap tensioning knob
-
-
0.01 kg
110-07200
All dimensions in mm. Subject to technical changes.
For product specific approvals and specifications please refer to the Appendix.
Further information at www.HellermannTyton.com/tools
517
Application Tooling
6.2
Application Tooling for Cable Ties
Manual Tensioning Tool with Metal Housing
MK6 up to 9.0 mm strap width
Features and Benefits
• Tough metal tool
• For cable ties up to 9.0 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force
• Reliable and low maintenance
MK6.
TYPE
MK6
SP MK6 replacement blade
Strap Width
max. (G)
Strap Thickness
max.
9.0
2.0
0.52 kg
110-06000
-
-
0.01 kg
110-06026
Weight
Article-No.
All dimensions in mm. Subject to technical changes.
Manual Tensioning Tool with Plastic Housing
MK9 up to 13.5 mm strap width
MK9 tool is used to apply bigger cable ties as they are used in trucks
and busses. MIL and VG certification allows the use of MK9 for military
vehicle and aviation construction.
Features and Benefits
• Glass-fibre-reinforced housing
• Ergonomic design
• For HellermannTyton plastic cable ties up to 13.5 mm width
• Consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force combined with two-step quick
adjustment
• MIL and VG approved
MK9.
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
13.5
2.0
0.39 kg
110-09500
SP MK9 replacement blade
-
-
0.01 kg
110-09511
SP lock cap tensioning knob
-
-
0.01 kg
110-07200
TYPE
MK9
For product specific approvals and specifications please refer to the Appendix.
518
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
Application Tooling
Application Tooling for Cable Ties
6.2
Manual Tensioning Tool with Plastic Housing
MK9HT up to 13.5 mm strap width
The MK9HT boasts especially high tensioning forces. Ideal for
applications where larger cable ties need to be securely fastened,
such as in truck and bus construction.
Features and Benefits
• Glass-fibre-reinforced housing
• Ergonomic design
• For cable ties up to 13.5 mm width
• MK9 HighTension version with higher tension force than MK9
• Consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force combined with two-step quick
adjustment
MK9HT.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MK9HT
13.5
2.0
0.39 kg
110-09000
SP MK9 replacement blade
-
-
0.01 kg
110-09511
SP lock cap tensioning knob
-
-
0.01 kg
110-07200
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
Further information at www.HellermannTyton.com/tools
519
Application Tooling
6.2
Application Tooling for Cable Ties
Pneumatic Tensioning Tool with Plastic Housing
MK9P up to 13.5 mm strap width
The MK9P is constructed with heavy duty parts to ensure optimum
performance. It is ideally designed to apply heavy-duty ties that are used
in vehicle construction such as trucks, busses and railways.
Features and Benefits
• Pneumatic tensioning tool
• Glass-fibre-reinforced housing
• For cable ties up to 13.5 mm width
• For consistent tensioning and automatically flush cutting
• Infinitely adjustable tension force
• High application speed
• Holding ring for a balancer
• Option of lower or upper air attachment
MK9P.
MK9P is also available with upper air
attachment.
Air Supply
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.)
6 Bar
Hose Internal Diameter
4.0 mm
LxHxW
approx. 280 x 200 x 55 mm
Specifications
CE, GS
Strap Width
max. (G)
Strap Thickness
max.
Weight
Air att.
Position
Article-No.
13.5
2.5
0.91 kg
Lower air connection
110-09100
13.5
2.5
0.91 kg
Top air connection
110-09110
SP compressed air hose
-
-
0.35 kg
-
110-30002
SP lock cap tensioning knob
-
-
0.01 kg
-
110-07200
SP MK9P replacement blade
-
-
0.01 kg
-
110-09111
TYPE
MK9P
For product specific approvals and specifications please refer to the Appendix.
520
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
Application Tooling
Application Tooling for Cable Ties
6.2
Manual Tensioning Tool for KR-Series
KR6/8
Application tool KR6/8 crimps the glass-fibre-reinforced locking pin
of the KR seal and leads to plastic deformation of the tie ends.
This produces a very permanent connection.
Features and Benefits
• Tough metal tool
• For applying KR-cable ties only
• For tensioning, fixing and cutting KR-cable ties
• Simply change the front plate to apply two different strap widths:
6 mm and 8 mm
KR6/8.
TYPE
For Ties
Strap Width
max. (G)
Weight
Article-No.
KR6/8
KR6, KR8
8.0
0.52 kg
121-00680
SP KR6/8 replacement blade
KR6, KR8
-
0.01 kg
122-68019
All dimensions in mm. Subject to technical changes.
Pneumatic Tensioning Tool for KR-Series
KR8PNSE
Application tool KR8PNSE crimps the glass-fibre-reinforced locking pin
of the KR seal and leads to plastic deformation of the tie ends.
This produces a very permanent connection.
Date of issue: October 2015
Features and Benefits
• Tough metal tool
• Pneumatic
• For applying KR-cable ties only
• For tensioning, fixing and automatically cutting KR-cable ties
• Tensioning force can be adapted with the air pressure
• Holding ring for a balancer
KR8PNSE.
Air Supply
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.)
4 Bar
Hose Internal Diameter
6.0 mm
LxHxW
approx. 320 x 210 x 50 mm
Specifications
CE, GS
For Ties
Strap Width
max. (G)
Weight
Article-No.
KR8PNSE
KR8
8.0
1.56 kg
121-00889
SP KR8PNSE replacement blade
KR8
-
0.01 kg
122-80032
TYPE
All dimensions in mm. Subject to technical changes.
For product specific approvals and specifications please refer to the Appendix.
Further information at www.HellermannTyton.com/tools
521
Application Tooling
6.2
Application Tooling for Cable Ties
Manual Tensioning Tool for Metal Ties MBT-Series
MK9SST up to 16.0 mm strap width
The MK9SST is constructed with heavy duty parts to ensure optimum
performance. It is designed to apply our MBT cable ties with a strap
width of up to 16 mm. The tool is ideally suited for use in most arduous
environments such as those found on board ships, oil rigs, construction
sites or in nuclear power stations.
Features and Benefits
• Glass-fibre-reinforced housing
• Ergonomic design
• Consistent tensioning and automatic cutting of metal ties
(MBT-Series)
• Infinitely adjustable tension force combined with two-step quick
adjustment
TYPE
MK9SST
SP MK9SST replacement blade
MK9SST.
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
16.0
0.3
0.60 kg
110-95000
-
-
0.01 kg
110-95273
All dimensions in mm. Subject to technical changes.
Pneumatic Tensioning Tool for Metal Ties
MBT-Series
MK9PSST up to 16.0 mm strap width
The MK9 Pneumatic Stainless Steel Tool (MK9PSST) is constructed
with heavy-duty parts to ensure optimum performance in demanding
environments. It is ideally designed to apply stainless steel MBT-Series
(Metal Ball Tie Series) up to 16.0 mm width.
MK9PSST.
Air Supply
Non oiled / oiled
Air Pressure (min.)
3 Bar
Air Pressure (max.)
6 Bar
Hose Internal Diameter
4.0 mm
LxHxW
approx. 280 x 200 x 55 mm
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
16.0
0.7
0.91 kg
110-95350
SP MK9PSST replacement blade
-
-
0.01 kg
110-95307
SP lock cap tensioning knob
-
-
0.01 kg
110-07200
TYPE
MK9PSST
All dimensions in mm. Subject to technical changes.
522
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
Features and Benefits
• Unique levels of repeatability and accuracy
• High application speed and low maintenance
• Improved compressed air supply for faster tensioning piston movement
• Shorter processing time and greater volume of connecting tie application
• Ergonomic design
• Automatic ejection of cut-off cable tie end
• Ideally designed to apply stainless steel MBT-Series up to 16.0 mm width
• Air pressure between 3 and 6 bar
Application Tooling
Application Tooling for Cable Ties
6.2
Manual Tensioning Tool for Metal Ties MBT-,
MLT- and AMT-Series
HDT16 up to 16.0 mm strap width
The HDT16 application tool is designed for installing heavy duty stainless
steel cable ties within a range of industries such as shipbuilding, oil
rigs, mining and mass transit. The tool can easily be adjusted making
it suitable for applying both MBT, MLT and AMT cable ties with a strap
width of up to 16 mm.
Features and Benefits
• Two way nose piece for use with MBT-Series and AMT-, MLT-Series
stainless steel cable ties
• Easy adjustment of the handles to ensure the most ergonomic
position for the operator
• Integrated cutting mechanism delivering a flush cut and professional
finish every time
• The ideal tool for achieving a perfect installation of MBT, MLT and
AMT cable ties
HDT16.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
HDT16
16.0
0.4
1.00 kg
110-40000
All dimensions in mm. Subject to technical changes.
Manual Tensioning Tool for Metal Ties MBT-Series
KST-STG200 up to 12.3 mm strap width
The KST-STG200 application tool is designed for installing heavy
duty stainless steel cable ties within a range of industries such as
shipbuilding, oil rigs, mining and mass transit. The tensioning strength
can be adjusted while pulling the trigger. The tool is easy to handle and
far more reliable than trying to tension the ties by hand.
Features and Benefits
• Tough metal tool
• Operator controlled tensioning
• Cut off by pulling the hand lever
KST-STG200.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
12.3
0.3
0.56 kg
110-09950
KST-STG200
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
Further information at www.HellermannTyton.com/tools
523
Application Tooling
6.2
Application Tooling for Cable Ties
Manual Tensioning Tool for Metal Ties
MST-S Series
MST6 for 5.9 mm strap width
The MST6 tool has been specially developed for reliably applying
HellermannTyton MST-Series metal cable ties. The punch-lock
mechanism mechanically crimps the tie ensuring a reliable bundling with
perfect resistance to vibration. The tension force is freely adjustable by
the operator.
Features and Benefits
• Tough metal tool
• Ergonomic design
• Consistent tensioning and automatically cutting of metal ties
• Designed for use with MST-S Series ties (5.9 mm)
• For tensioning, fixing and cutting MST-S metal ties only
MST6.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MST6
5.9
0.3
0.53 kg
110-61000
SP MST6-P29 (blade)
-
-
0.01 kg
110-61001
SP MST6-P30 (punch)
-
-
0.01 kg
110-61002
All dimensions in mm. Subject to technical changes.
One Step to the Web!
Manual Tensioning Tool for Metal Ties
MST-M Series
MST9 for 8.9 mm strap width
The MST9 tool has been specially developed for reliably applying
HellermannTyton metal cable ties of the MST-M Series.The punch-lock
mechanism mechanically crimps the tie ensuring a reliable bundling with
perfect resistance to vibration. The tension force is freely adjustable by
the operator.
MST9.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MST9
8.9
0.4
0.54 kg
110-13000
SP MST9-P29 (blade)
-
-
0.01 kg
110-13001
SP MST9-P30 (punch)
-
-
0.01 kg
110-13002
All dimensions in mm. Subject to technical changes.
524
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
Features and Benefits
• Tough metal tool
• Ergonomic design
• Consistent tensioning and automatic cutting of metal ties
• Designed for use with MST-M Series ties (8.9 mm)
Application Tooling
Application Tooling for Cable Ties
6.2
Manual Tensioning Tool for Metal Ties MLT-Series
MTT4 up to 12.0 mm strap width
The MTT4 tensioning tool is a lightweight manual processing tool which
is easy to use for application of the MLT (releasable) series. The extended
nose piece ensures the fixing length of the MLT cable tie. While using
the ratchet system, the operator can easily cut off the tie at the correct
length with the long cutter lever.
Features and Benefits
• Tough metal tool
• Simple ratchet operation, easy to use
• Operator controlled tensioning and cutting facility
MTT4.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
MTT4
12.0
0.7
0.78 kg
110-04000
All dimensions in mm. Subject to technical changes.
Manual Tensioning Tool for Metal Ties MBT-Series
THT up to 7.9 mm strap width
The THT Tool is ideal for occasional users of stainless steel MBT cable
ties. The THT Tool allows simple hand tensioning of MBT ties for quick
and easy installations, coiling the tail for a safe, neat finish.
Features and Benefits
• Ergonomic T-Handle design with rubber grip
• Suitable for MBT cable ties (4.6 mm and 7.9 mm)
• Simple tensioning mechanism coils the strap tail quickly without
cut off
Date of issue: October 2015
THT.
TYPE
Strap Width
max. (G)
Strap Thickness
max.
Weight
Article-No.
7.9
1.0
0.15 kg
110-09970
THT Tool
All dimensions in mm. Subject to technical changes.
Further information at www.HellermannTyton.com/tools
525
Application Tooling
6.3
Application Tooling for Cutting Plastic Ties
Manual Cutting tool for plastic ties
CUTties
The CUTties is a cutting tool for removing plastic cable ties. It ensures
the strap of the tie is cut while preserving the wires and harnesses
from being damaged in the process. Its use is recommended in many
applications for which wires and harnesses have a high added value, in
particular for railway and aviation industries.
Features and Benefits
• Cutting tool for plastic ties
• Tie can be cut off at any part of the strap
• Ensures the cable isolation from being damaged
• Light-weight aluminium housing, ergonomically designed
• Single-handed operation
• Three tools for cable tie width from 2.3 to 4.8 mm
• Coloured push rods allows their identification
TYPE
The CUTties is a precise cutting tool for plastic ties.
Bring the tool perpendicular to the
tie...
... apply light pressure...
... press on the button whilst
maintaining pressure on the tool...
... release the button and remove the
tool, the tie is cut.
For Cable Tie Width
Colour
Weight
Article-No.
2.3 - 2.8
Blue (BU), Yellow (YE)
0.075 kg
110-05000
CUTties-3
3.3 - 3.8
Blue (BU), Green (GN)
0.085 kg
110-05001
CUTties-5
4.0 - 4.8
Blue (BU), Red (RD)
0.089 kg
110-05002
CUTties-1
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
526
Further information at www.HellermannTyton.com/tools
Application Tooling
Application Tooling for Snappers
6.3
Snapper Tools
MSNP1-70 for Snapper Size 1 to 70
ASNP2-22 for Snapper Size 2 to 22
ASNP24-70 for Snapper Size 24 to 70
Features and Benefits
• For efficient fixing of the snapper hose clips
• MSNP tool: handy for installation on site
• ASNP tool: suitable for series production. The retaining screw limits
the draw-in area and prevents overstretching of the snapper
Snapper Application Tools MSNP1-70 and ASNP24-70.
Pneumatic Tools for Snapper are
available on request. Contact us!
Snapper hose clips for tubes and
harnesses see page 174.
Snapper Application Tool ASNP2-22.
TYPE
MSNP1-70
Application
Weight
Material
Colour
Article-No.
SNP-Series 1 up to 70
0.18 kg
Metal, Plastic
Yellow (YE)
191-01700
ASNP2-22
SNP-Series 2 up to 22
0.20 kg
Metal, Plastic
Blue (BU)
191-02220
ASNP24-70
SNP-Series 24 up to 70
0.25 kg
Metal, Plastic
Red (RD)
191-24700
Date of issue: October 2015
Subject to technical changes.
Further information at www.HellermannTyton.com/tools
527
Application Tooling
6.3
Application Tooling for Heat Shrinkable Tubing
Processing tool for heat shrinkable products
ShrinkPad 110
The ShrinkPad 110 provides a fast and reliable process for the recovery
of thinwalled heat shrinkable products with or without an adhesive
liner. The heat process takes place through a direct contact method.
The key components are the two specially heated elastic pads, which
encapsulate the shrinkable product whilst transferring heat effectively
with minimal heat loss. The electrically heated and pneumatically
controlled pads can process material to a maximum diameter of 10 mm
and a maximum length of 110 mm.
Features and Benefits
• Processing by direct-contact method with specially heated, elastic pads
• Minimal lost of heat due to direct contact with the shrinking object
• Reduces the shrinking time
• Increased process security in the shrinking process due to a
temperature-controlled heat source
• Good integration into automated workflows possible
• Very high level of job security
• Long life span of the pads
Heat shrink processing tool ShrinkPad 110 - control unit, shrink press unit, power
cable and foot switch.
ShrinkPad 110 - for fast and reliable
heat shrink processing.
Application video:
ShrinkPad 110
Shrink pad set.
Power Supply
230V AC / 50 Hz
Air Supply
Non oiled / oiled
Air Pressure (max.)
6 Bar
Hose Internal
Diameter
6.0 mm
Weight
12.5 kg
Operating
Temperature
+100 °C to +300 °C
Cycle Time
0.5 to 10 sec.
Operation Type
foot switch
LxHxW
Control unit approx. 205 x 210 x 160 mm,
Shrink press unit approx. 140 x 130 x 220 mm,
Pad approx. 110 x 7 x 20 mm
Specifications
CE
Shrink pads: Max. processing dimensions
Carton
Quantity
Article-No.
ShrinkPad 110
1 pcs.
391-30000
Pad for ShrinkPad 110
2 pcs.
391-30001
TYPE
For product specific approvals and specifications please refer to the Appendix.
528
Further information at www.HellermannTyton.com/tools
Date of issue: October 2015
Subject to technical changes.
Application Tooling
Application Tooling for Heat Shrinkable Tubing
6.3
Gas powered Hot Air Tool
E4500
The E4500 hot air gun starter kit is ideal for working in cramped spaces
or where there is no power supply. The kit includes a E4500 hot air
tool with protective spring, gas cartridge P445, reflector nozzle Z2 and
flat nozzle Z3. The hot air tool is suitable for shrinking all types of heat
shrink products including tubing, shapes and cable repair sleeves. It can
also be used for the bending and shaping of PVC pipes, soft soldering of
copper pipes, drying, defrosting (of locks), heating and paint stripping.
Features and Benefits
• Cordless hot air gun works with special gas cartridge
• Does not need any power supply
• Suitable for outdoor use
• Designed for heat shrink tubing, end caps and moulded shapes
• Supplied with protective spring, two nozzles and a gas cartridge
• Allows precise working in any position even in restricted spaces
• Can be operated on its stand for hands free use
• Light weight tool
• Operating time of cartridige: approx. 1.5 hours
• With easy Piezo ignition
E4500-H with heat protecting spring.
Practical hot air gun kit E4500 with accessories.
Gas cartridge P445.
One Step to the Web!
TYPE
Description
E4500
Hot air gun with protective spring incl. gas cartridge, reflector nozzle Z2 and flat nozzle Z3
391-90002
P445
P445 Refill Gas Cartridge (Butane, Propane, Propene)
391-90101
Article-No.
Date of issue: October 2015
Subject to technical changes.
Further information at www.HellermannTyton.com/tools
529
Application Tooling
6.3
Application Tooling for Heat Shrinkable Tubing
Electrical Hot Air Tool
H5002 - handy tool
For applying heat shrinkable products like thin walled shrink tubing
and moulded shapes.
Features and Benefits
• Lightweight and compact hot air tool
• Enables comfortable, fatigue-free work
• Temperature electronically controlled from 100-600 °C,
cold air step of 50 °C
• Air-flow regulation adjusted in two stages (300 l/min and 500 l/min)
H5002 - The light, convenient hot-air tool.
TYPE
Air Flow
l/min
Operating
Temperature
Standby Temp.
°C
Wattage
Operational
Voltage
Weight
Article-No.
H5002
300 - 500 l/min
+100 °C to +600 °C
50 °C
2,000 W
230 V AC ~ / 230-240 V
0.9 kg
391-50200
Subject to technical changes.
Electrical Hot Air Tool
H5004 - for professional use
H5004 electrical hot air tool is designed for shrinking down many heat
shrinkable products like thin wall tubing, with and without adhesive,
end caps and moulded shapes.
Features and Benefits
• Professional hot air gun
• Temperature electronically controlled
• Air flow regulation
• Equiped with LED temperature indication enableling precise
temperature adjustment
H5004 - for professional use.
TYPE
Air Flow
l/min
Operating
Temperature
Standby Temp.
°C
Wattage
Operational
Voltage
Weight
Article-No.
H5004
150 - 500 l/min
+50 °C to +650 °C
50 °C
2,300 W
230-240V, 50Hz
1.13 kg
391-50400
Date of issue: October 2015
Subject to technical changes.
530
Further information at www.HellermannTyton.com/tools
Application Tooling
Application Tooling for Non Shrinkable Tubing
6.3
Three-Pronged Pliers for Sleeves and Grommets
NA
Three-pronged expansion tools are used to ensure speedy and precise
application of expandable markers and sleeves.
Features and Benefits
• To easy affix expandable sleeves of every type onto cables/connectors
• Sleeve simply slide onto the prongs
• Push pliers and pull over cable
• Close pliers, sleeve is placed easily
• Hellerine lubricant recommended for easy operation
Fast, secure application with the NA three-pronged pliers.
Replacement prong NA1K/3
Replacement prong NA0/1
Three-prong pliers max.
application diameter
Replacement prong NA8/10
Replacement prong NA4/5
TYPE
Bundle
Ø min.
Bundle
Ø max.
ØD
max.
Max. length
of marker
Article-No.
NA/01
1.3
1.8
10.5
28
621-10001
NA1K/3
2.5
5.0
11.0
28
621-10103
NA4/5
7.5
10.0
15.5
50
621-10405
NA8/10
12.0
17.0
25.5
60
621-10810
NA/01 PRONG
1.3
1.8
-
28
621-60001
NA1K/3 PRONG
2.5
5.0
-
28
621-60103
NA4/5 PRONG
7.5
10.0
-
50
621-60405
NA8/10 PRONG
12.0
17.0
-
60
621-60810
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
Further information at www.HellermannTyton.com/tools
531
Application Tooling
6.3
Application Tooling for Non Shrinkable Tubing
Three-Pronged Pliers for Sleeves and Grommets
VA2,5/5 - Reinforced
Expansion tools are used to ensure speedy and precise application of
expandable markers and sleeves.
Features and Benefits
• Suitable for expanding tubing cut lengths and rubber parts
• Withstands high loading
• Set of 3 2.5/5 pins
• Replacement pins available in sizes 8 and 18
VA2.5/5.
Replacement prong size 2.5/5
Three-prong pliers max.
application diameter
Replacement prong size 18
Replacement prong size 8
TYPE
VA2.5/5
Bundle
Ø min.
Bundle
Ø max.
ØD
max.
Article-No.
2.5
5.0
26.0
621-00200
VA-2.5/5 PRONG
2.5
5.0
26.0
621-01200
VA2.5/5 PRONG 8
8.0
10.0
28.0
621-02200
VA2.5/5 PRONG 18
18.0
20.0
30.0
621-03200
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
532
Further information at www.HellermannTyton.com/tools
Application Tooling
Application Tooling for Non Shrinkable Tubing
6.3
Three-Pronged Pliers for Sleeves and Grommets
K, S, SS
Three-pronged expansion tools are used to ensure speedy and precise
application of expandable markers and sleeves.
Features and Benefits
• For speedy application of markers and sleeves
• Hellerine lubricant recommended for easy operation
• Handy D kit contains a tool body, a range of prongs and small bottle
of Hellerine lubricant
Fast, secure application with the three-pronged expansion tools.
Three-prong pliers max.
application diameter
TYPE
Bundle
Ø min.
Bundle
Ø max.
ØD
max.
Max. length
of marker
Article-No.
D KIT
1.2
11.5
17.0
32
621-80005
K TOOL
5.0
10.0
17.0
32
621-80007
SS TOOL
1.2
2.0
15.0
20
621-80008
S TOOL
2.5
4.0
15.0
20
621-80009
All dimensions in mm. Subject to technical changes.
Application Tooling
Application Tooling for Braided Sleeves
Hot cutting tool
HSG0
The HSG0 hand tool is used to cut braided sleeving cleanly and without
fraying.
Date of issue: October 2015
Features and Benefits
• Light and sturdy
• Heats up quickly with the press of button and cuts in seconds
• The yarn melts and fuses together
• No fraying of the sleeving
A replacement blade is available
with the item number 170-99002.
The HSG0 hot cutting tool prevents the braided sleeving from fraying.
TYPE
Weight
Colour
Article-No.
HSG0
1.15 kg
Blue (BU)
170-99001
Subject to technical changes.
Further information at www.HellermannTyton.com/tools
533
Application Tooling
6.3
Application Tooling for Identification
Helafix Tool
HCT1 for carrier size HCR09
HCT2 for carrier size HCR12
HCT1 and HCT2 tools are ideal for cleanly cutting the carrier strip as well
as punching out the securing holes. For HCR06, HCR18 and HCR24, the
front part of the pliers can be used. To fix the character holders HC and
HCR simply use the T18 range of cable ties, fixings or rivets.
Features and Benefits
• Cleanly cut Helafix HCR carrier tubing
• Punch securing holes on edges of HCR09 (HCT1) and HCR12 (HCT2)
• Apply punched HCR09 and HCR12 with T18 range of cable ties
• Suitable for punching rivet holes in HCR06, HCR18 and HCR24 tubing
• Punch hole diameter 2.5 mm
• Fix with T18 range of cable ties, or suitable rivets
Any length can be used…,
…just cut to suit.
TYPE
For Carrier
Width
For
Size
ØD
Article-No.
HCT1
10.0
HCR09
2.5
525-00010
HCT2
13.0
HCR12
2.5
525-00013
Date of issue: October 2015
All dimensions in mm. Subject to technical changes.
534
Further information at www.HellermannTyton.com/tools
www.HellermannTyton.com/tools
Date of issue: October 2015
Manual and pneumatic processing tools:
The professional way to fasten metal cable ties
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement