The connections on the MS
INSTALLATION
INSTALLATION WARNING
•
Ensure the marine vessels + 12V lead is removed from the battery
before any equipment is connected
•
Investigate the marine vessels fuel tanks and electrical wiring
locations before you begin installation
• Ensure all wiring is protected to avoid damage
BT100
CONNECT WIRES
TOGETHER
AMPLIFIER ON (+12V) , - - -
POWER (+12V)
'-----'
RCA(REO)
AUXIN (RED)
L...J,_._Iil"'f'(/.1
0
RCA (WHITE)
AUX IN (WHITE)
e
®®®
eee
®®®
MARINE HEAD UNIT
FUSION recommends that the MS-BT1 00 is mounted in an elevated
position as far away from metal work as possible. This will ensure
maximum range for Bluetooth audio streaming. Any barrier between the
MS-BT1 00 and your streaming device will reduce the range.
The connections on the MS-BT1 00 are:
GROUND(-) wire
Black
Ground
connection
for MS-BT1 00
Connect the "Ground" wire
first. This wire should be
connected to the same
ground connection as the
marine head unit. This wire
is usually Black.
POWER + 12V wire
Red
Power
connection
for MS-BT1 00
Connect to the "Amplifier
On" wire on the back of your
marine head unit. This wire
is usually Blue.*
White RCA plug
Left Audio
Channel
Connect to the White AuxIn
RCA socket on your marine
head unit
Red RCA plug
Right Audio
Channel
Connect to the Red Aux In
RCA socket on your marine
head unit
* FUSION recommends that the MS-BT1 00 is connected to the "Amplifier
On" wire on the back of the marine head unit as this ensures that the
MS-BT1 00 is switched off when the head unit is off. FUSION marine
head units also provide electrical protection to the MS-BT1 00 when
connected this way. If the MS-BT1 00 is connected directly to a 12V
power supply, then a 2 amp fuse must be installed between the
power supply and MS-BT1 00, at the power source end of the cable.
The MS-BT1 00 can be secured by either using the adhesive backing tape
or by using a 6 gauge, pan head, self tapping, non-corrosive screw.
Please ensure that the mounting surface is flat clean and dry prior to
applying the adhesive backing tape. The surface can be cleaned with an
alcohol swab.
When mouting using the screw hole, ensure that the surface is flat and
tightening the screw does not distort the case.
ALTERNATIVE MOUNTING:
REMOVE LINER ON ADHESIVE PAD
AND STICK UNIT TO BULKHEA >---"""'7
DRIL PILOT HOLt---~
REGISTER YOUR PRODUCT ONLINE:
For your own peace of mind. register your product purchase online at
www.fusionelectronics.com
We'll keep you up to date with any news related to your product, any
software upgrades or new accessories to help you get the most from your
product.
This product is backed by a 1 Year Limited Consumer Warranty and by
registering your product you can be assured that if the unexpected occurs
we'll have your details and be ready to help.
RECORD YOUR PRODUCT DETAILS HERE:
SERIAL NUMBER: _ _ _ _ _ _ _ __
DATE OF PURCHASE: _ _ _ _ _ _ __
AFFIX RECEIPT HERE:
OVERVIEW
The MS-BT1 00 Bluetooth module is designed to provide Bluetooth audio
streaming from a compatible smartphone or media player directly to your
FUSION marine stereo.
The MS-BT1 00 supports audio only and is connected to the auxiliary input
audio source on your stereo. Whether you have an iPhone, Android or
Windows smartphone you can enjoy your favourite tracks while you're
on board your vessel through FUSION's superior marine entertainment
stereos and speakers.
A 1.5m (5 Ft) long cable is provided to allow an optimal mounting position
for the best range possible.
OPERATION
After installation (see overleaf for installation instructions). the
MS-BT1 00 will be powered on and off when the marine head unit is
powered on and off. The MS-BT1 00 is a Bluetooth device, and before you
can stream music you need to "pair" with it.
BLUETOOTH PAIRING
To pair with the MS-BT1 00 you first need to "discover" it from your
streaming device.
Please refer to your smartphone or media player user manual to start the
Bluetooth discovery mode.
The name of the MS-BT1 00 in discovery mode is "FUSION MS-BT1 00".
Please select this device to connect.
The MS-BT1 00 does not require a PIN number to pair.
If the MS-BT1 00 is currently connected to a smartphone or media device,
it cannot be discovered by any other device.
CONNECTING TO A DIFFERENT BLUETOOTH STREAMING DEVICE
To connect to a different Bluetooth streaming device, you will need to
disconnect from your current device. Please refer to your smartphone or
media player user manual on how to do this.
When the MS-BT1 00 is powered off and on it always enters discovery mode.
PLAYING MUSIC
After your smartphone or media player is paired, you can use your music
player application on this device to select and play music over Bluetooth.
Please ensure that your marine head unit source selection is set to Aux
ln. The play, pause, next track, previous track controls on the marine
head unit do not control the MS-BT1 00. All music selection and playback
is controlled from your smartphone or media player.
RECEIVING PHONE CALLS
The exact operation is dependent on your smartphone. On most
Smartphones if you are streaming music and you receive a phone call,
the music will pause and the ring tone will be played through your
smartphone speaker. If you answer the phone, the call will not be played
through the marine head unit. Once the call is completed, the music will
automatically start playing again.
TECHNICAL SPECIFICATIONS
Cable Length:
Water Resistant Design:
Bluetooth:
Operating range:
Dimensions:
Operating Voltage:
Operating Current:
Compliances:
1.5m (5 Ft)
IP65 enclosure
A2DP V3.0 Class 2
:i!:1 Om (33ft)
59mm (h) x 42mm (w) x 15mm (d)
10- 16V DC
20m A
BQB 8020331
FCC
CE, C-Tick
TROUBLESHOOTING
When I play music on
my smartphone there
is no audio output
through the main
head unit
When I search for
Bluetooth devices I
am unable to find the
FUSION MS-BT1 00
on my smartphone
•
Ensure that you have paired with the
MS-BT1 00 (please refer to your
smartphone or media player user manual).
•
Ensure that your smartphone's music
player is configured to play music
over Bluetooth.
•
Ensure that the marine head unit is
powered on and the auxiliary input source
is selected.
•
Ensure that all wires and connectors
are connected as per the installation
instructions.
•
Ensure that the marine head unit is
powered on.
•
Ensure that no other Bluetooth audio
streaming devices are currently paired
with the MS-BT1 00. If you are unsure if
this is the case, power the head unit off,
then on again.
•
Ensure that all wires and connectors are
connected as per the installation instructions.
V2.0
ENGLISH
LIMITED 1 YEAR MARINE CONSUMER WARRANTY
FUSION Electronics Limited ('FUSION') warrants that this FUSION Marine product is free from
defects in material and workmanship, according to the following terms and conditions:
•
The initial limited warranty for the FUSION product purchased extends to the first 12 months
beginning on the date of purchase of the product
•
The limited warranty extends only to the original consumer purchaser lconsumerl of the product
and is not assignable or transferable to any subsequent purchaser/end user.
•
The Limited warranty extends only to consumers who purchase the product in one of the
countries lor areas! set forth on www.fusionelectromcs.com. The Limited warranty is only valid
in FUSION's intended country lor areal of sale of the product.
•
During the Limited warranty period, FUSION or its authorised service network wiLL repair or
replace lat FUSION's discretion!, any defective product or parts thereof with new and return the
product to the consumer in working condition. No charge wiLL be made to the consumer for
either parts or labour in repairing or replacing the product. All replaced parts and cosmetic
parts should be free of defects at the time of shipment and, therefore shall not be covered under
these limited warranty terms .
•
Repaired product will be warranted for the balance of the original warranty period or for ninety
1901 days from the date of repair, whichever is longer.
•
All warranty claims must be accompanied with a copy of this warranty card, and a copy of proof
of purchase.
The consumer shall have no coverage or benefits under this limited warranty if any of the
following conditions are applicable:
•
The product has been subject to: abnormal use, abnormal conditions, improper storage,
unauthorised modifications, unauthorised connections, unauthorised repair including but not
Limited to use of unauthorised spare parts in repairs, misuse. neglect-, abuse, accident,
alteration, improper installation, acts of God, spill of foods or liquids, maladjustment of
customer controls or other acts which are beyond the reasonable control of FUSION, including
deficiencies in consumable parts such as fuses, and breakage or damage to antennae unless
caused directly by defects in materials or workmanship, and normal wear and tear of the product.
•
FUSION was not notified by the consumer of the alleged defect or malfunction of the product
during the applicable limited warranty period.
•
The product serial number or the accessory date code has been removed, defaced or altered.
•
The product was used with or connected to an accessory not supplied by FUSION or fit for use
with FUSION product, or used in a manner other than its intended use.
If a problem develops during the limited warranty period, the consumer should take the following
step-by-step procedure:
1. The consumer shall return the product to any authorised FUSION dealer in authorised
sales countries for repair or replacement processing. FUSION assumes no freight or shipping
responsibility for returning goods to an authorised FUSION dealer, or return freight from an
authorised dealer to the consumer submitting the warranty claim.
2. The consumer shaLL be charged for any parts or labour charges not covered by this Limited
warranty. The consumer shall be responsible for expenses related to removal and reinstallation
of the product.
3. If the product is returned to FUSION after the expiration of the warranty period, FUSION'S
normal service policies shaLL apply and the consumer will be charged accordingly.
THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY APPLY TO THE EXTENT THAT THEY ARE
NOT SUPERCEDED BY ANY OTHER RIGHTS AND REMEDIES UNDER ANY APPLICABLE LEGISLATION
THAT CANNOT BE EXCLUDED. OTHERWISE, TO THE EXTENT PERMITTED BY LAW, ANY IMPLIED
WARRANTY IS EXCLUDED AND THE FOREGOING WARRANTY IS THE PURCHASER'S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
TO THE EXTENT PERMITTED BY LAW, FUSION SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR A LOSS OF ANTICIPATED BENEFITS OR PROFITS, OUT OF USE OR
INABILITY TO USE THE PRODUCT.
•
Some states in America do not allow the exclusion or limitation of consequential damages, so
the above Limitation and exclusion may not apply to you. This warranty gives you specific legal
rights which may vary from state to state.
•
FUSION neither assumes nor authorises any authorised service centre or any person or entity
to assume for it any other obligation or liability beyond that which is expressly provided for in
this warranty.
•
All warranty information, product features and specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement