Rosemount DP Level Transmitters and 1199 Seal Systems

Rosemount DP Level Transmitters and 1199 Seal Systems
Product Data Sheet
March 2015
00813-0100-4016, Rev PA
Rosemount DP Level Transmitters and
1199 Seal Systems
Applications

Level, Flow, Pressure, Interface, Density

Extreme hot and cold temperatures

Corrosive, clogging, or viscous processes

Hygienic requirements

Special process connections
Rosemount DP Level
March 2015
Proven, Reliable, and Innovative DP Level Technologies
To meet your application requirements, Rosemount DP level technologies deliver an unsurpassed product offering that is easy to
specify, order, and install. The offering includes a wide variety of process connections, direct mount or capillary connections, and
materials of construction to address almost any application. If you don’t see what you need listed here, ask us. We can create a
custom engineered solution to meet your needs.
Rosemount Level Transmitters
Level transmitters combine world-class Rosemount pressure instrumentation with direct-mount seals, all in a single integrated
model number.
Rosemount 3051SAL, 3051L, and 2051L Level Transmitters
Balanced System
Two equal lengths
of capillary
Tuned-System Assembly

Achieve best-in-class system reliability with All welded systems

Wireless configurations provide new data access

Connect to virtually any process with a comprehensive offering of process
connections, fill fluids, direct mount or capillary connections, and
materials

Quantify and optimize total system performance with QZ option
Rosemount Tuned-System™ Assemblies optimize results

Reduce installed costs by 20% by eliminating excess capillary and
transmitter mounting hardware

Improve performance by up to 30%

Increase response time by up to 80%

Reduce risk with up-front quantified performance reports
Direct mount
plus capillary
Contents
Rosemount 3051S Electronic Remote Sensor (ERS) System . . 5
Specialty Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Rosemount 3051S Scalable™ Level Transmitter . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Rosemount 3051L Level Transmitter . . . . . . . . . . . . . . . . . . . . . 47
Rosemount 3051S/3051S ERS Certifications . . . . . . . . . . . . 130
Rosemount 2051L Liquid Level Transmitter . . . . . . . . . . . . . . . 54
Rosemount 3051S Wireless Certifications . . . . . . . . . . . . . . 138
Rosemount 1199 Direct Mount Seal Systems . . . . . . . . . . . . . 62
Rosemount 1199 Remote Mount Seal Systems . . . . . . . . . . . . 68
Flanged Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Threaded Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Rosemount 3051 Product Certifications . . . . . . . . . . . . . . . 140
Rosemount 2051 Product Certifications . . . . . . . . . . . . . . . 149
Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Hygienic Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
2
www.rosemount.com
March 2015
Rosemount DP Level
Rosemount 3051S Electronic Remote Sensor Systems
The Rosemount 3051S ERS™ System is a new digital DP Level architecture that links two 3051S pressure sensors together
electronically. Differential pressure, level, and volume is calculated and transmitted using a standard two-wire 4-20 mA HART®
signal.
A digital upgrade to a proven technology

90% improvement in time response

Elimination of temperature effects and measurement drift

MultiVariable capabilities including DP, PLO, PHI, Volume, and Level

Proven Rosemount 3051S sensor technology
Simplified installations and maintenance routines

Elimination of wet legs or dry legs

Easy installations without need for heat tracing and insulation

Proactive maintenance and troubleshooting with sensor alerts and diagnostics

Simplified inventories with sensors and standard cable
Rosemount 1199 Seal Systems
A seal system consists of a pressure transmitter, one or two seals, a fill fluid, and either a direct mount or capillary style connection.
Seal systems provide a reliable process pressure measurement and prevent the process medium from contacting the transmitter
diaphragm. Transmitter/diaphragm seal systems should be considered when:

The process temperature is outside of the operating ranges of the transmitter.

The process is corrosive and/ or requires specific exotic materials of construction.

The process contains suspended solids or is viscous and is prone to plugging of connections.

The application requires the use of flush-mount hygienic connections that facilitates CIP/SIP service.

There is a requirement for easier cleaning of the process from the connections to avoid contamination between batches.
Application flexibility

Flanged, threaded, and hygienic process connections

Meets industry standards such as EN 1092-1, ANSI/ASME B16.5, JIS B2238,
ANSI/ASME B1.20.1, EN 10226-1, GOST 12815-80, China Chemical Industrial
Standards HG20615 and HG20592, and 3-A Standard 74-03

Variety of fill fluids including cold temperature, hot temperature, and hygienic &
food grade

Three different capillary diameters allow for optimization of accuracy and time
response
www.rosemount.com
3
Rosemount DP Level
March 2015
Reliable system construction

Welded design with no threaded connections

100% Helium leak tested

Advanced manufacturing techniques ensure air-free, leak-tight system that is stable over time

Reliable operation in full vacuum applications
Robust seal design

Backup convolutions on the diaphragm protect seal integrity

Recessed diaphragms reduce potential for handling damage
Rosemount Seal System Construction Options
Welded-repairable construction
All welded (vacuum) construction

All connection pointed welded except gasket between sensor
module and transmitter flange

All connection points welded including welded disk over sensor
module isolators

Transmitter can be re-used if repair work required

Ideal for vacuum applications (< 6 psia, 400 mbar-a)

Seal system & transmitter are not repairable
4
www.rosemount.com
March 2015
Rosemount DP Level
Rosemount 3051S Electronic Remote Sensor (ERS)
System
The 3051S ERS System is a flexible, 2-wire 4-20 mA HART architecture that
calculates differential pressure (DP) electronically using two pressure sensors
that are linked together with a non-proprietary electrical wire.
Ideal applications for the 3051S ERS System include tall vessels and distillation
columns that have traditionally required long lengths of capillary or impulse
piping. When used in these types of applications, the 3051S ERS System can
deliver:
1
Secondary
3051SAM
Primary
3

Faster time response

Simplified installations

Reduced maintenance
1. Choose two 3051S ERS transmitter models. These may be any combination
of 3051SAM and 3051SAL models.
In-Line
3051SAL
Coplanar
More accurate and repeatable DP measurements
How to order
2
Coplanar

2. Decide which model will be the ERS Primary (4-20 mA loop termination and
optional LCD display) and which will be the ERS Secondary. This will be
specified by the “Configuration Type” code in each model number.
3. Specify two full model numbers per the desired configuration.
In-Line
3051SAL1PG4AA1A1020DFF71DA00M5
3051SAM1ST2A2E11A2A
Additional information
Specifications: page 114
Certifications: page 130
Dimensional drawings: page 155
Rosemount 3051SAM Transmitter for ERS Applications

Coplanar and in-line sensor module platforms

Variety of process connections including threaded NPT, flanges, manifolds, and 1199 remote seals

Available with 15-year stability and 15-year limited warranty
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 1. Rosemount 3051SAM Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter type
3051SAM
Scalable Advanced Measurement Transmitter
Performance class(1)
1
Ultra: 0.025% span accuracy, 200:1 rangedown, 15-year stability, 15-year limited warranty
★
2
Classic: 0.035% span accuracy, 150:1 rangedown, 15-year stability
★
www.rosemount.com
5
Rosemount DP Level
March 2015
Table 1. Rosemount 3051SAM Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Configuration type
P
Electronic Remote Sensor - Primary
★
S
Electronic Remote Sensor - Secondary
★
Pressure module type
Pressure sensor type
G
Coplanar
Gage
★
T
In-Line
Gage
★
E
In-Line
Absolute
★
A
Coplanar
Absolute
Pressure range(2)
Coplanar gage
In-Line gage
In-Line absolute
Coplanar absolute
1A
N/A
-14.7 to 30 psig
(-1,01 to 2,06 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 30 psia
(0 to 2,06 bar)
★
2A
-250 to 250 inH2O
(-621,60 to 621,60 mbar)
-14.7 to 150 psig
(-1,01 to 10,34 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 150 psia
(0 to 10,34 bar)
★
3A
-393 to 1000 inH2O
(-0,97 to 2,48 bar)
-14.7 to 800 psig
(-1,01 to 55,15 bar)
0 to 800 psia
(0 to 55,15 bar)
0 to 800 psia
(0 to 55,15 bar)
★
4A
-14.2 to 300 psig
(-0,97 to 20,68 bar)
-14.7 to 4000 psig
(-1,01 to 275,79 bar)
0 to 4000 psia
(0 to 275,79 bar)
0 to 4000 psia
(0 to 275,79 bar)
★
5A
-14.2 to 2000 psig
(-0,97 to 137,89 bar)
-14.7 to 10000 psig
(-1,01 to 689,47 bar)
0 to 10000 psia
(0 to 689,47 bar)
N/A
★
Isolating diaphragm
2(3)
316L SST
★
3(3)
Alloy C-276
★
4(3)(4)
Alloy 400
(4)(5)
5
Tantalum
6(3)(4)
Gold-plated Alloy 400 (includes Graphite-Filled PTFE O-Ring)
7(3)(4)
Gold-plated 316L SST
Process connection
Coplanar module type
In-Line module type
A11(6)
Assemble to Rosemount 305 Manifold
Assemble to Rosemount 306 Manifold
★
A12(6)
Assemble to Rosemount 304 or AMF Manifold with SST
Traditional Flange
Assemble AMF Manifold to ½-14 NPT Female
Process Connection
★
A15(6)
Assemble to Rosemount 304 or AMF manifold to SST
Traditional Flange with Alloy C-276 Drain Vents
N/A
★
A22(6)
Assemble AMF manifold to SST Coplanar Flange
N/A
★
B11(6)(7)
Assemble to One Rosemount 1199 Remote Diaphragm
Seal with SST transmitter flange
Assemble to One Rosemount 1199 Remote
Diaphragm
★
E11
Coplanar Flange (CS), ¼-18 NPT, 316 SST Drain Vents
½ -14 NPT Female
★
6
www.rosemount.com
March 2015
Rosemount DP Level
Table 1. Rosemount 3051SAM Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
E12
Coplanar Flange (SST), ¼-18 NPT, 316 SST Drain Vents
N/A
★
E13(3)
Coplanar Flange (Cast C-276), ¼-18 NPT, Alloy C-276
Drain Vents
N/A
★
E14
Coplanar Flange (Cast Alloy 400), ¼-18 NPT, Alloy
400/K-500 Drain Vents
N/A
★
E15(3)
Coplanar Flange (SST), ¼-18 NPT, Alloy C-276 Drain Vents
N/A
★
E16
Coplanar Flange (CS), ¼-18 NPT, Alloy C-276 Drain Vents
N/A
★
E21
Coplanar Flange (CS), RC ¼, 316 SST Drain Vents
N/A
★
E22
Coplanar Flange (SST), RC ¼, 316 SST Drain Vents
N/A
★
E23(3)
Coplanar Flange (Cast C-276), RC ¼, Alloy C-276 Drain
Vents
N/A
★
E24
Coplanar Flange (Cast Alloy 400), RC ¼, Alloy 400/K-500
Drain Vents
N/A
★
E25(3)
Coplanar Flange (SST), RC ¼, Alloy C-276 Drain Vents
N/A
★
E26
Coplanar Flange (CS), RC ¼, Alloy C-276 Drain Vents
N/A
★
F12
Traditional Flange (SST), 1/4-18 NPT, 316 SST Drain Vents
N/A
★
(3)
(3)
1
F13(3)
Traditional Flange (Cast C-276), /4-18 NPT, Alloy C-276
Drain Vents
N/A
★
F14
Traditional Flange (Cast Alloy 400), 1/4-18 NPT, Alloy
400/K-500 Drain Vents
N/A
★
F15(3)
Traditional Flange (SST), 1/4-18 NPT, Alloy C-276 Drain
Vents
N/A
★
F22
Traditional Flange (SST), RC ¼, 316 SST Drain Vents
N/A
★
F23(3)
Traditional Flange (Cast C-276), RC ¼, Alloy C-276 Drain
Vents
N/A
★
F24
Traditional Flange (Cast Alloy 400), RC ¼, Alloy 400/K500
Drain Vents
N/A
★
F25(3)
Traditional Flange (SST), RC ¼, Alloy C-276 Drain Vents
N/A
★
F52
DIN-Compliant Traditional Flange (SST), ¼-18 NPT, 316
Drain Vents, 7-16-in. Bolting
N/A
★
G11
Vertical Mount Level Flange (SST), 2-in ANSI Class 150, 316
SST Drain Vents
G1/2 A DIN 16288 male (Range 1-4 only)
★
G12
Vertical Mount Level Flange (SST), 2-in ANSI Class 300, 316
SST Drain Vents
N/A
★
G21
Vertical Mount Level Flange (SST), 3-in ANSI Class 150, 316
SST Drain Vents
N/A
★
G22
Vertical Mount Level Flange (SST), 3-in ANSI Class 300, 316
SST Drain Vents
N/A
★
G31
Vertical Mount Level Flange (SST), DIN-DN 50 PN 40, 316
SST Drain Vents
N/A
★
G41
Vertical Mount Level Flange (SST), DIN-DN 80 PN 40, 316
SST Drain Vents
N/A
★
www.rosemount.com
7
Rosemount DP Level
March 2015
Table 1. Rosemount 3051SAM Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
F11
Traditional Flange (CS), ¼-18 NPT, 316 SST Drain / Vents
Non-Threaded Instrument Flange (I-Flange)
F32
Bottom Vent Traditional Flange (SST), ¼-18 NPT, 316 SST
Drain Vents
N/A
F42
Bottom Vent Traditional Flange (SST), RC ¼, 316 SST Drain
Vents
N/A
F62
DIN-Compliant Traditional Flange (316 SST), ¼-18 NPT,
316 Drain Vents, M10 Bolting
N/A
F72
DIN-Compliant Traditional Flange (316 SST), ¼-18 NPT,
316 Drain Vents, M12 Bolting
N/A
Transmitter output
A
★
4–20 mA with digital signal based on HART protocol
Housing style
Material
Conduit entry size
Housings for ERS Primary - Configuration Type code P
1A
PlantWeb housing
Aluminum
1/2–14 NPT
★
1B
PlantWeb housing
Aluminum
M20 x 1.5 (CM 20)
★
1J
PlantWeb housing
SST
1/2–14 NPT
★
1K
PlantWeb housing
SST
M20 x 1.5 (CM 20)
★
★
2E
Junction Box with Remote Display Output
Aluminum
1
2F
Junction Box with Remote Display Output
Aluminum
M20 x 1.5 (CM 20)
★
2M
Junction Box with Remote Display Output
SST
1/2–14 NPT
★
1C
PlantWeb housing
Aluminum
G1/2
1L
PlantWeb housing
SST
G1/2
2G
Junction Box with Remote Display Output
Aluminum
G1/2
/2–14 NPT
Housings for ERS Secondary - Configuration Type code S
2A
Junction Box
Aluminum
1
★
2B
Junction Box
Aluminum
M20 x 1.5 (CM 20)
★
★
/2–14 NPT
2J
Junction Box
SST
1
2C
Junction Box
Aluminum
G1/2
/2–14 NPT
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
Electronic remote sensor connection cable
R05
50 ft. (15.2 m) Spool of Electronic Remote Sensor Cable
★
R10
100 ft. (30.5 m) Spool of Electronic Remote Sensor Cable
★
R15
150 ft. (45.7 m) Spool of Electronic Remote Sensor Cable
★
8
www.rosemount.com
March 2015
Rosemount DP Level
Table 1. Rosemount 3051SAM Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Mounting bracket
Traditional flange bracket, CS, 2-in. pipe
★
Traditional flange bracket, CS, panel
★
B3(4)
Traditional flange flat bracket, CS, 2-in. pipe
★
B4
B1(4)
B2
(4)
Bracket, all SST, 2-in. Pipe and Panel
★
B7
(4)
Traditional flange bracket, B1 with SST bolts
★
B8
(4)
Traditional flange bracket, B2 with SST bolts
★
B9(4)
Traditional flange bracket, B3 with SST bolts
★
BA(4)
Traditional flange bracket, B1, all SST
★
BC(4)
Traditional flange bracket, B3, all SST
★
Special configuration (software)
C1(8)
Customer Software Configuration (“Configuration Data Sheet” must be completed)
★
C3
Gage Pressure Calibration on Rosemount 3051SAM_ _A4 only
★
NAMUR alarm and Saturation Levels, High alarm
★
C5(8)
NAMUR alarm and Saturation Levels, Low alarm
★
C6(8)
C4
(8)
Custom alarm and Saturation Levels, High alarm (requires C1 and Configuration Data Sheet)
★
C7
(8)
Custom alarm and Saturation Levels, Low alarm (requires C1 and Configuration Data Sheet)
★
C8
(8)
Low alarm (standard Rosemount alarm and saturation levels)
★
Special configuration (hardware)
D2(9)
1
★
D4(10)
External ground screw assembly
★
D5(9)
Delete transmitter drain/vent valves (install plugs)
★
D7(9)
Coplanar flange without drain/vent ports
D9
(9)
/2-14 NPT Flange Adapters
RC 1/2 Flange Adapters
Product certifications
E1
ATEX Flameproof
★
I1
ATEX Intrinsic Safety
★
N1
ATEX Type n
★
K1
ATEX Flameproof and Intrinsically Safe, Type n, Dust
★
ND
ATEX Dust
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
I5
FM Intrinsically Safe; Nonincendive
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
E6(11)
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
I6
CSA Intrinsically Safe
★
www.rosemount.com
9
Rosemount DP Level
March 2015
Table 1. Rosemount 3051SAM Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
K6(11)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
E7
IECEx Flameproof
★
I7
IECEx Intrinsic Safety
★
N7
IECEx Type n
★
K7
IECEx Flameproof, Intrinsic Safety, Type n
★
E2
INMETRO Flameproof
★
I2
INMETRO Intrinsically Safe
★
K2
INMETRO Flameproof, Intrinsic Safety, Type n
★
E3
China Flameproof
★
I3
China Intrinsic Safety, Dust Ignition-proof
★
EP
Korea Flameproof
★
IP
Korea Intrinsic Safety
★
KP
Korea Flameproof, Intrinsic Safety
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
KM
Technical Regulations Customs Union (EAC) Flameproof, Intrinsic Safety
★
KA(11)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB(11)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
(11)
KD
Shipboard approvals
SBS
American Bureau of Shipping (ABS) Type Approval
★
SBV
Bureau Veritas (BV) Type Approval
★
SDN
Det Norske Veritas (DNV) Type Approval
★
SLL
Lloyds Register (LR) Type Approval
★
Calibration certification
Q4
Calibration certificate
★
QP
Calibration Certificate and Tamper Evident Seal
★
Material traceability certification
Q8
Material Traceability Certification per EN 10204 3.1
★
Quality certification for safety
QS
Prior-use certificate of FMEDA Data
★
QT
Safety Certified to IEC 61508 with certificate of FMEDA data
★
Surface finish certification
Q16(12)
10
Surface Finish Certification for Hygienic Remote Seals
★
www.rosemount.com
March 2015
Rosemount DP Level
Table 1. Rosemount 3051SAM Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Toolkit performance reports
QZ(13)
Remote Seal System Performance Calculation Report
★
Terminal blocks
T1(8)
Transient Terminal Block
★
Sensor fill fluid
L1(14)
Inert Sensor Fill Fluid
★
Graphite-Filled PTFE O-Ring
★
O-ring
L2
Bolting material
Austenitic 316 SST Bolts
★
ASTM A 193, Grade B7M Bolts
★
L6(9)
Alloy K-500 Bolts
★
L7(3)(9)
ASTM A 453, Class D, Grade 660 Bolts
★
(9)
ASTM A 193, Class 2, Grade B8M Bolts
★
L4(9)
L5
L8
(3)(9)
Display type (ERS primary only)
M5(8)
PlantWeb LCD display
★
M7(8)(15)
Remote Mount LCD display and Interface, PlantWeb housing, No Cable, SST Bracket
★
Remote Mount LCD display and Interface, PlantWeb housing, 50 ft. (15.2 m) Cable, SST Bracket
★
Remote Mount LCD display and Interface, PlantWeb housing, 100 ft. (30.5 m) Cable, SST Bracket
★
M8
(8)
M9(8)
Pressure testing
P1
Hydrostatic Testing with Certificate
Special cleaning
P2(9)
P3
Cleaning for Special Services
(9)
Cleaning for Less than 1 PPM Chlorine/Fluorine
NACE certificate
Q15(16)
Q25
(16)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical model number:
3051SAM 1 S T 2A 2 E11 A 2A
(1) For detailed specifications see “Specifications” on page 114.
(2) The pressure range should be specified based on the maximum static pressure, not differential pressure.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments. Order with Q15 or Q25 to receive a NACE certificate.
www.rosemount.com
11
Rosemount DP Level
March 2015
(4) Not available with Pressure Sensor / Module codes T or E.
(5) Tantalum diaphragm material is only available with Pressure Sensor / Module code G.
(6) “Assemble to” items are specified separately and require a completed model number.
(7) Consult an Emerson Process Management representative for performance specifications.
(8) Not available with Configuration Type code S.
(9) Not available with Process Connection code A11.
(10) This assembly is included with options E1, N1, K1, ND, E4, E7, N7, K7, E2, KA, KC, KD, K2, T1, EP, and KP.
(11) Not available with M20 or G ½ conduit entry size.
(12) Q16 is only available when the diaphragm seal has surface finish options.
(13) The QZ report quantifies the performance of the entire ERS system. One report is provided per ERS system. The QZ option is specified on the Primary Transmitter
(Configuration Type code P).
(14) Silicone fill fluid is standard.
(15) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
(16) NACE compliant wetted materials are identified by Footnote 3.
12
www.rosemount.com
March 2015
Rosemount DP Level
Rosemount 3051SAL Transmitter for ERS Applications

Integrated transmitter and direct mount seal in a single model number

Variety of process connections including flanged, threaded, and hygienic remote seals

Available with 15-year limited warranty
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
A 3051SAL Scalable ERS Level Transmitter consists of 3 parts. First, specify the transmitter model codes found on page 13. Then,
specify a direct mount seal found on page 31. Finish the model number by specifying all desired options on page 16.
ERS Transmitter Model Codes__page 13
Direct Mount Seal Model Codes_page 31
ERS Options____page 16
Table 2. Rosemount 3051SAL Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter type
3051SAL
Scalable Advanced Level Transmitter
Performance class(1)
1
Ultra: 0.055% span accuracy, 150:1 rangedown, 15-year limited warranty
★
2
Classic: 0.065% span accuracy, 150:1 rangedown
★
Configuration type
P
Electronic Remote Sensor - Primary
★
S
Electronic Remote Sensor - Secondary
★
Pressure module type
Pressure sensor type
G
Coplanar
Gage
★
T
In-Line
Gage
★
E
In-Line
Absolute
★
A
Coplanar
Absolute
Pressure range(8)
Coplanar gage
In-Line gage
In-Line absolute
Coplanar absolute
1A
N/A
-14.7 to 30 psig
(-1,01 to 2,06 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 30 psia
(0 to 2,06 bar)
★
2A
-250 to 250 inH2O
(-621,60 to 621,60 mbar)
-14.7 to 150 psig
(-1,01 to 10,34 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 150 psia
(0 to 10,34 bar)
★
3A
-393 to 1000 inH2O
(-0,97 to 2,48 bar)
-14.7 to 800 psig
(-1,01 to 55,15 bar)
0 to 800 psia
(0 to 55,15 bar)
0 to 800 psia
(0 to 55,15 bar)
★
4A
-14.2 to 300 psig
(-0,97 to 20,68 bar)
-14.7 to 4000 psig
(-1,01 to 275,79 bar)
0 to 4000 psia
(0 to 275,79 bar)
0 to 4000 psia
(0 to 275,79 bar)
★
5A
-14.2 to 2000 psig
(-0,97 to 137,89 bar)
-14.7 to 10000 psig
(-1,01 to 689,47 bar)
0 to 10000 psia
(0 to 689,47 bar)
N/A
★
www.rosemount.com
13
Rosemount DP Level
March 2015
Table 2. Rosemount 3051SAL Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Transmitter output
A
★
4-20 mA with Digital Signal Based on HART Protocol
Housing style
Material
Conduit entry size
Housings for ERS Primary - Configuration Type Code P
1A
PlantWeb housing
Aluminum
1
★
1B
PlantWeb housing
Aluminum
M20 x 1.5 (CM 20)
★
★
/2–14 NPT
1J
PlantWeb housing
SST
1/2–14 NPT
1K
PlantWeb housing
SST
M20 x 1.5 (CM 20)
★
2E
Junction Box with Remote Display
Output
Aluminum
1/2–14 NPT
★
2F
Junction Box with Remote Display
Output
Aluminum
M20 x 1.5 (CM 20)
★
2M
Junction Box with Remote Display
Output
SST
1/2–14 NPT
★
1C
PlantWeb housing
Aluminum
G1/2
1L
PlantWeb housing
SST
G1/2
2G
Junction Box with Remote Display
Output
Aluminum
G1/2
Housings for ERS Secondary - Configuration Type Code S
2A
Junction Box
Aluminum
1
★
2B
Junction Box
Aluminum
M20 x 1.5 (CM 20)
★
2J
Junction Box
SST
1/2–14 NPT
★
2C
Junction Box
Aluminum
/2–14 NPT
1
G /2
Seal system type
Coplanar Pressure Module Type
1
Single Direct Mount Seal System
Welded-Repairable
★
2
Single Direct Mount Seal System
All welded
★
All welded
★
In-line Pressure Module Type
1
Single Direct Mount Seal System
High side connection type
Single Direct Mount Seal System (Between Transmitter and Remote Seal)
0
No Extension
★
2
2-in. (50 mm) Extension
★
4
4-in. (100 mm) Extension
★
6(2)
Thermal Range Expander - Silicone 200 Secondary Fill Fluid
★
7(3)(2)
Thermal Range Expander - SYLTHERM XLT Secondary Fill Fluid
★
Low Side Connection Type (Reference Pressure Connection)
Single Direct Mount Seal System
00
None (In-line Pressure Module Type Only)
★
20
316L SST Isolator/SST Transmitter Flange
★
30
Alloy C-276 Isolator/SST Transmitter Flange
★
14
www.rosemount.com
March 2015
Rosemount DP Level
Table 2. Rosemount 3051SAL Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Specific
gravity
at 77 °F No
(25 °C) extension
Seal fill fluid
Temperature limits(4)
Thermal range
2-in. (50 mm) 4-in. (100 mm)
expander (process
extension
extension
temperature)(5)
-49 to 401 °F
-49 to 401 °F
(-45 to 205 °C) (-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
N/A
★
D
Silicone 200
0.93
F
Silicone 200 for Vacuum
Applications
0.93
L
Silicone 704
1.07
C
Silicone 704 for Vacuum
Applications
1.07
R
Silicone 705
1.09
V
Silicone 705 for Vacuum
Applications
1.09
A
SYLTHERM XLT
0.85
-102 to 293 °F -102 to 293 °F
(-75 to 145 °C) (-75 to 145 °C)
-102 to 293 °F
(-75 to 145 °C)
N/A
★
H
Inert (Halocarbon)
1.85
-49 to 320 °F
-49 to 320 °F
(-45 to 160 °C) (-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
N/A
★
G(6)(7)
Glycerin and Water
1.13
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
N/A
★
N(6)
Neobee M-20
0.92
5 to 401 °F(2)
5 to 437 °F
(-15 to 205 °C) (-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
N/A
★
P(6)(7)
Propylene Glycol and
Water
1.02
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
N/A
★
Y(8)
Ultra ThermTM 805
1.20
N/A
N/A
N/A
Up to 770 °F
(410 °C)
★
Z(8)
UltraTherm 805 for
Vacuum
1.20
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor
pressure curves in Rosemount DP Level Fill Fluid Specification Technical
Note (00840-2100-4016).
32 to 401 °F(2)
(0 to 205 °C)
32 to 464 °F(2)
(0 to 240 °C)
32 to 500 °F(2)
(0 to 260 °C)
Up to 599 °F
(315 °C)
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor
pressure curves in Rosemount DP Level Fill Fluid Specification Technical
Note (00840-2100-4016).
68 to 401 °F(2)
(20 to 205 °C)
68 to 464 °F(2)
(20 to 240 °C)
68 to 500 °F(2)
(20 to 260 °C)
Up to 698 °F
(370 °C)
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor
pressure curves in Rosemount DP Level Fill Fluid Specification Technical
Note (00840-2100-4016).
5 to 203 °F
(-15 to 95 °C)
For use in vacuum application below 14.7 psia (1 bar-a), refer to vapor
pressure curves in Rosemount DP Level Fill Fluid Specification Technical
Note (00840-2100-4016).
★
★
★
★
★
★
Continue specifying a completed model number by choosing a remote seal type below:
page 75
page 81
www.rosemount.com
FF Flush Flanged Seal
EF Extended Flanged Seal
Process Connections:
2-in. / DN 50 / 50A
3-in. / DN 80 / 80A
4 in. / DN 100 / 100A
Process Connections:
3-in. / DN 80 / 80A
4-in. / DN 100 / 100A
15
Rosemount DP Level
March 2015
Table 2. Rosemount 3051SAL Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
page 78
RF Remote Flanged Seal
Process Connections:
½ in.
¾ in.
1-in. / DN 25 / 25A
1½-in. / DN 40 / 40A
page 86
FC Flush Flanged Seal - Ring Type Joint (RTJ)
Gasket Surface
2 in.
3 in.
RC Ring Type Joint (RTJ) Flanged Seal
½-in
¾-in
1 in.
1½ in.
RT Remote Threaded Seal
Process Connections:
¼ - 18 NPT
½ - 14 NPT
¾ - 14 NPT
1 - 11.5 NPT
1¼ - 11.5 NPT
page 96
SC Hygienic Tri Clamp Seal
Process Connections:
1.5-in.
2-in.
3-in.
page 98
SS Hygienic Tank Spud Seal
Process Connections:
4-in.
page 88
page 92
Options (include with selected model number)
Extended Product Warranty
WR3
3-year limited warranty
WR5
5-year limited warranty
Electronic remote sensor connection cable
★
★
(9)
R05
50 ft. (15.2 m) Spool of Electronic Remote Sensor Cable
★
R10
100 ft. (30.5 m) Spool of Electronic Remote Sensor Cable
★
R15
150 ft. (45.7 m) Spool of Electronic Remote Sensor Cable
★
Software configuration
C1(10)
Custom Software Configuration (requires Configuration Data Sheet)
★
Gage pressure calibration
C3
Gage Pressure Calibration on Rosemount 3051SAL_ _A4 only
★
Alarm limit
C4(10)
NAMUR Alarm and Saturation Levels, High Alarm
★
C5(10)
NAMUR Alarm and Saturation Levels, Low Alarm
★
16
www.rosemount.com
March 2015
Rosemount DP Level
Table 2. Rosemount 3051SAL Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Custom Alarm and Saturation Levels, High Alarm (requires C1 and Configuration Data Sheet)
★
C7
Custom Alarm and Saturation Levels, Low Alarm (requires C1 and Configuration Data Sheet)
★
C8(10)
Low Alarm (Standard Rosemount Alarm and Saturation Levels)
★
C6(10)
(10)
Ground screw
D4(11)
External Ground Screw Assembly
★
Conduit plug
DO
316 SST Conduit Plug
★
Product certifications
E1
ATEX Flameproof
★
I1
ATEX Intrinsic Safety
★
N1
ATEX Type n
★
K1
ATEX Flameproof and Intrinsically Safe, Type n, Dust
★
ND
ATEX Dust
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
I5
FM Intrinsically Safe; Nonincendive
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
E6(12)
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
I6
CSA Intrinsically Safe
★
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
E7
IECEx Flameproof
★
I7
IECEx Intrinsic Safety
★
N7
IECEx Type n
★
K7
IECEx Flameproof, Intrinsic Safety, Type n
★
E2
INMETRO Flameproof
★
I2
INMETRO Intrinsically Safe
★
K2
INMETRO Flameproof, Intrinsic Safety
★
EP
Korea Flameproof
★
E3
China Flameproof
★
I3
China Intrinsic Safety
★
IP
Korea Intrinsic Safety
★
KP
Korea Flameproof, Intrinsic Safety
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
KM
Technical Regulations Customs Union (EAC) Flameproof, Intrinsic Safety
★
KA(12)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(12)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
K6
KB
(12)
(12)
www.rosemount.com
17
Rosemount DP Level
March 2015
Table 2. Rosemount 3051SAL Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Shipboard approvals
SBS
American Bureau of Shipping (ABS) Type Approval
★
SBV
Bureau Veritas (BV) Type Approval
★
SDN
Det Norske Veritas (DNV) Type Approval
★
SLL
Lloyds Register (LR) Type Approval
★
Sensor fill fluid
L1(13)
Inert Sensor Fill Fluid
★
Graphite-filled PTFE o-ring
★
O-ring
L2
Bolting material
L4
★
Austenitic 316 SST Bolts
Display type (ERS primary only)
M5(10)
PlantWeb LCD display
★
M7(10)(14)
Remote Mount LCD display and Interface, PlantWeb housing, No Cable, SST Bracket
★
(10)
Remote Mount LCD display and Interface, PlantWeb housing, 50 ft. (15.2 m) Cable, SST Bracket
★
(10)
Remote Mount LCD display and Interface, PlantWeb housing, 100 ft. (30.5 m) Cable, SST Bracket
★
M8
M9
Pressure testing
P1
Hydrostatic Testing with Certificate
Special cleaning
P2
Cleaning for Special Services
P3
Cleaning for Less than 1 PPM Chlorine/Fluorine
Calibration certification
Q4
Calibration Certificate
★
QP
Calibration certificate with tamper evident seal
★
Material traceability certification
Q8
Material traceability certification per EN 10204 3.1
★
Quality certification for safety
QS
Prior-use certificate of FMEDA Data
★
QT
Safety Certified to IEC 61508 with certificate of FMEDA data
★
Toolkit performance reports
QZ(15)
Remote Seal System Performance Calculation Report
★
Transient protection
T1(10)
18
Transient Terminal Block
★
www.rosemount.com
March 2015
Rosemount DP Level
Table 2. Rosemount 3051SAL Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
NACE certificate
Q15(16)
(16)
Q25
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical model number:
3051SAL 1 P G 4A A 1A 1 0 20 D FF 7 1 DA 0 0 M5
(1) For detailed specifications see “Specifications” on page 114.
(2) Maximum working pressure (MWP) of the Thermal Range Expander is 1500 psi (103,4 bar).
(3) Thermal Range Expander with SYLTHERM XLT secondary fill fluid is not recommended for use in vacuum applications below 6 psia (400 mbar-a).
(4) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70 °F (21 °C). Temperature limits are reduced in vacuum service and may be limited by seal
selection.
(5)
For complete process and ambient temperature limits, see Thermal Range Expander temperature operating range on page 122.
(6) This is a food grade fill fluid.
(7) Not suitable for vacuum applications.
(8) Only available with Thermal Range Expander.
(9) The pressure range should be specified based on the maximum static pressure, not differential pressure.
(10) Not available with Configuration Type code S.
(11) This assembly is included with options EP, KP, E1, N1, K1, ND, E4, E7, N7, K7, E2, KA, KC, KD, K2, T1, E3, EM, KM.
(12) Not available with M20 or G½ conduit entry size.
(13) Silicone fill fluid is standard.
(14) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
(15) The QZ report quantifies the performance of the entire ERS system. One report is provided per ERS system. The QZ option is specified on the Primary Transmitter
(Configuration Type code P).
(16) Materials of construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
www.rosemount.com
19
Rosemount DP Level
March 2015
Rosemount 3051S Scalable™ Level Transmitter
3051SAL In-Line with
“FF” Flanged Seal
Rosemount 3051S Level Transmitters combine the features and benefits of a
high-performance 3051S Pressure Transmitter with the durability and reliability of
diaphragm seals all in a single model number.
Product features and capabilities include:
3051SAL Coplanar™
with
“SS” Hygienic Tank Spud
Seal

Variety of process connections including flanged, threaded, and hygienic seals

Quantified performance for the entire transmitter / seal assembly (QZ option)

HART, FOUNDATION™ fieldbus, and wireless protocols
3051SAL Tuned-System
Assembly with
Thermal Range
Expander
Additional information
Specifications: page 114
Dimensional drawings: page 155
3051SAL Balanced
System
Rosemount 3051SAL Scalable Level Transmitter
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
A 3051SAL Scalable Level Transmitter consists of 3 parts. First, specify the transmitter model codes found on page 20.
Then, specify a direct mount seal found on page 31. Finish the model number by specifying all desired options on page 26.
Transmitter Model Codes_....... page 20
Diaphragm Seal Model Codes_.page 31
Options_______ page 26
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter type
3051SAL
Scalable Level Transmitter
Performance class(1)
1
Ultra: 0.055% span accuracy, 150:1 rangedown, 15-year limited warranty
★
2
Classic: 0.065% span accuracy, 150:1 rangedown
★
Configuration type
C
20
★
Liquid Level Transmitter
www.rosemount.com
March 2015
Rosemount DP Level
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Pressure module type
Pressure sensor type
D
Coplanar
Differential
★
G
Coplanar
Gage
★
T
In-Line
Gage
★
E
In-Line
Absolute
★
A
Coplanar
Absolute
Pressure range
Coplanar DP
Coplanar gage
In-line gage
In-line
absolute
Coplanar absolute
1A
N/A
N/A
-14.7 to 30 psig
(-1,01 to 2,06
bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 30 psia
(0 to 2,06 bar)
2A
-250 to 250 inH2O
(-621,60 to 621,60
mbar)
-250 to 250 inH2O
(-621,60 to 621,60
mbar)
-14.7 to 150 psig
(-1,01 to 10,34
bar)
0 to 150 psia
0 to 150 psia
(0 to 10,34 bar) (0 to 10,34 bar)
★
3A
-1000 to 1000 inH2O
(-2,48 to 2,48 bar)
-393 to 1000 inH2O
(-0,97 to 2,48 bar)
-14.7 to 800 psig
(-1,01 to 55,15
bar)
0 to 800 psia
0 to 800 psia
(0 to 55,15 bar) (0 to 55,15 bar)
★
4A
-300 to 300 psi
(-20,68 to 20,68 bar)
-14.2 to 300 psig
(-0,97 to 20,68 bar)
-14.7 to 4000
psig
(-1,01 to 275,79
bar)
0 to 4000 psia
(0 to 275,79
bar)
0 to 4000 psia
(0 to 275,79 bar)
★
5A
-2000 to 2000 psi
(-137,89 to 137,89
bar)
-14.2 to 2000 psig
(-0,97 to 137,89
bar)
-14.7 to 10000
psig
(-1,01 to 689,47
bar)
0 to 10000 psia
(0 to 689,47
bar)
N/A
★
★
Transmitter output
A
4-20 mA with digital signal based on HART protocol
★
F(2)
FOUNDATION fieldbus protocol
★
X(3)
Wireless (requires wireless options and wireless PlantWeb housing)
★
Housing style
Material
Conduit entry
1A
PlantWeb housing
Aluminum
1
★
1B
PlantWeb housing
Aluminum
M20 x 1.5
★
★
/2–14 NPT
1J
PlantWeb housing
SST
1
1K
PlantWeb housing
SST
M20 x 1.5
★
★
/2–14 NPT
2A
Junction Box housing
Aluminum
1
2B
Junction Box housing
Aluminum
M20 x 1.5
★
2E
Junction Box with output for remote
interface
Aluminum
1
★
2F
Junction Box with output for remote
interface
Aluminum
M20 x 1.5
★
2J
Junction Box housing
SST
1
★
(4)
/2–14 NPT
/2–14 NPT
/2–14 NPT
5A
Wireless PlantWeb housing
Aluminum
1
/2–14 NPT
★
5J(4)
Wireless PlantWeb housing
SST
1/2–14 NPT
★
7J(5)
Quick Connect (A size Mini, 4-pin male
termination)
SST
N/A
★
www.rosemount.com
21
Rosemount DP Level
March 2015
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
1C
PlantWeb housing
Aluminum
G1/2
1L
PlantWeb housing
316L SST
G1/2
2C
Junction Box housing
Aluminum
G1/2
2G
Junction Box with output for remote
interface
Aluminum
G1/2
Seal system type
Coplanar pressure module type
1
Direct Mount Single Seal System
Welded-Repairable
★
2
Direct Mount Single Seal System
All Welded
★
3(6)
Tuned-System Assembly - 1 Direct Mount and 1 Remote Mount Seal with Capillary Welded-Repairable
★
4(6)
Tuned-System Assembly - 1 Direct Mount and 1 Remote Mount Seal with Capillary All Welded
★
Balanced System - 2 Remote Mount Seals with Equal Lengths of Capillary
Welded-Repairable
★
5
(6)
6
(6)
Balanced System - 2 Remote Mount Seals with Equal Lengths of Capillary
All Welded
★
7
Remote Mount Single Seal System with Capillary - 316L Low Side Transmitter
Isolator
Welded-Repairable
★
8
Remote Mount Single Seal System with Capillary - 316L Low Side Transmitter
Isolator
All Welded
★
9
Remote Mount Single Seal System with Capillary - Alloy C-276 Low Side
Transmitter
Isolator
Welded-Repairable
★
A
Remote Mount Single Seal System with Capillary - Alloy C-276 Low Side
Transmitter
Isolator
All Welded
★
In-Line pressure module type
1
Direct Mount Single Seal System
All Welded
★
7
Remote Mount Single Seal System with Capillary
All Welded
★
High side connection type
Direct mount single seal system (between transmitter and remote seal)
0
No Extension
★
2
2-in. (50 mm) Extension
★
4
4-in. (100 mm) Extension
★
6(7)
Thermal Range Expander - Silicone 200 Secondary Fill Fluid
★
7(7)(8)
Thermal Range Expander - SYLTHERM XLT Secondary Fill Fluid
★
Tuned-System assembly
0
No Extension on Direct Mount High Side Connection
★
2
2-in. (50 mm) Extension on Direct Mount High Side Connection
★
4
4-in. (100 mm) Extension on Direct Mount High Side Connection
★
6(7)
Thermal Range Expander - Silicone 200 Secondary Fill Fluid (both direct mount and remote mount capillary)
★
Thermal Range Expander - SYLTHERM XLT Secondary Fill Fluid (both direct mount and remote mount capillary)
★
7
(7)(8)
Balanced system
0
6
(7)
7(7)(8)
22
Standard Balanced System
★
Thermal Range Expander - Silicone 200 Secondary Fill Fluid (both remote mount capillaries)
★
Thermal Range Expander - SYLTHERM XLT Secondary Fill Fluid (both remote mount capillaries)
★
www.rosemount.com
March 2015
Rosemount DP Level
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Remote mount single seal system with capillary
Standard Remote Mount Single Seal System with Capillary
★
6
(7)
Thermal Range Expander - Silicone 200 Secondary Fill Fluid
★
7
(7)(8)
Thermal Range Expander - SYLTHERM XLT Secondary Fill Fluid
★
0
Low side connection type (reference pressure connection)
Direct mount single seal system
0
None (In-Line Pressure Module Type Only)
★
1 (9)
Assemble to One Rosemount 1199 Remote Seal
★
2
316L SST isolator and SST transmitter flange
★
3
Alloy C-276 isolator and SST transmitter flange
★
Tuned-System assembly, balanced, or single seal capillary system
B
0.03-in. (0.711 mm) ID Capillary
★
C
0.04-in. (1.092 mm) ID Capillary
★
D
0.075-in. (1.905 mm) ID Capillary
★
E
0.03-in. (0.711 mm) ID Capillary, PVC Coated with Closed End
★
F
0.04-in. (1.092 mm) ID Capillary, PVC Coated with Closed End
★
G
0.075-in. (1.905 mm) ID Capillary, PVC Coated with Closed End
★
Capillary length
(10)
0
No Capillary (required for Direct Mount Single Seal System)
★
A
1 ft (0.3 m)
★
B
5 ft (1.5 m)
★
C
10 ft (3.0 m)
★
D
15 ft (4.5 m)
★
E
20 ft (6.1 m)
★
F
25 ft (7.6 m)
★
G
30 ft (9.1 m)
★
H
35 ft (10.7 m)
★
J
40 ft (12.2 m)
★
K
45 ft (13.7 m)
★
L
50 ft (15.2 m)
★
M
0.5 m (1.6 ft)
★
N
1.0 m (3.3 ft)
★
P
1.5 m (4.9 ft)
★
R
2.0 m (6.6 ft)
★
T
2.5 m (8.2 ft)
★
U
3.0 m (9.8 ft)
★
V
3.5 m (11.5 ft)
★
W
4.0 m (13.1 ft)
★
Y
5.0 m (16.4 ft)
★
Z
6.0 m (19.7 ft)
★
1
7.0 m (23 ft)
★
2
8.0 m (26.2 ft)
★
www.rosemount.com
23
Rosemount DP Level
March 2015
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
3
9.0 m (29.5 ft)
★
4
10.0 m (32.8 ft)
★
5
11.0 m (36.1 ft)
★
6
12.0 m (39.4 ft)
★
7
13.0 m (42.6 ft)
★
8
14.0 m (45.9 ft)
★
9
15.0 m (49.2 ft)
★
Temperature limits
Specific gravity
at 77 °F (25 °C)
Seal fill fluid
No extension
-49 to 401 °F
(-45 to 205 °C)
(11)
2-in.
(50 mm)
extension
4-in.
(100 mm)
extension
Thermal range
expander
(process
temperature)(12)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
N/A
★
D
Silicone 200
0.93
F
Silicone 200 for
Vacuum Applications
0.93
L
Silicone 704
1.07
C
Silicone 704 for
Vacuum Applications
1.07
R
Silicone 705
1.09
V
Silicone 705 for
Vacuum Applications
1.09
A
SYLTHERM XLT
0.85
-102 to 293 °F
(-75 to 145 °C)
-102 to 293 °F
(-75 to 145 °C)
-102 to 293 °F
(-75 to 145 °C)
N/A
★
H
Inert (Halocarbon)
1.85
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
N/A
★
G(14)(15)
Glycerine and Water
1.13
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
N/A
★
N(14)
Neobee M-20
0.92
5 to 401 °F(13)
(-15 to 205 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
N/A
★
P (14)(15)
Propylene Glycol and
Water
1.02
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
N/A
★
Y (16)
UltraTherm 805
1.20
N/A
N/A
N/A
Up to 770 °F
(410 °C)
★
Z(16)
UltraTherm 805 for
vacuum applications
1.20
For use in vacuum application below 14.7 psia (1 bar-a), refer to
vapor pressure curves in Rosemount DP Level Fill Fluid Specification
Technical Note 900840-2100-4016).
★
24
For use in vacuum applications below 14.7 psia (1 bar-a), refer to
vapor pressure curves in Rosemount DP Level Fill Fluid Specification
Technical Note (00840-2100-4016).
32 to 401 °F(13)
(0 to 205 °C)
32 to 464 °F(13)
(0 to 240 °C)
32 to 500 °F(13)
(0 to 260 °C)
★
Up to 599 °F
(315 °C)
★
For use in vacuum applications below 14.7 psia (1 bar-a), refer to
vapor pressure curves in Rosemount DP Level Fill Fluid Specification
Technical Note (00840-2100-4016).
★
68 to 401 °F(13)
(20 to 205 °C)
68 to 464 °F(13)
(20 to 240 °C)
68 to 500 °F(13)
(20 to 260 °C)
Up to 698 °F
(370 °C)
★
For use in vacuum applications below 14.7 psia (1 bar-a), refer to
vapor pressure curves in Rosemount DP Level Fill Fluid Specification
Technical Note (00840-2100-4016).
★
www.rosemount.com
March 2015
Rosemount DP Level
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Continue specifying a completed model number by choosing a remote seal type below:
page 75
FF Flush Flanged Seal
Process Connections:
2-in. / DN 50 / 50A
3-in. / DN 80 / 80A
4 in. / DN 100 / 100A
EF Extended Flanged Seal
Process Connections:
3-in. / DN 80 / 80A
4-in. / DN 100 / 100A
page 78
RF Remote Flanged Seal
Process Connections:
½ in.
¾ in.
1-in. / DN 25 / 25A
1½-in. / DN 40 / 40A
page 83
PF Pancake Seal
2-in. / DN 50 / 50A
3-in. / DN 80 / 80A
page 86
FC Flush Flanged Seal - Ring Type Joint (RTJ) Gasket Surface
2 in.
3 in.
RC Ring Type Joint (RTJ) Flanged Seal
½-in
¾-in
1 in.
1½ in.
RT Remote Threaded Seal
Process Connections:
¼ - 18 NPT
½ - 14 NPT
¾ - 14 NPT
1 - 11.5 NPT
1¼ - 11.5 NPT
page 96
SC Hygienic Tri Clamp Seal
Process Connections:
1.5-in.
2-in.
3-in.
page 98
SS Hygienic Tank Spud Seal
Process Connections:
4-in.
page 81
page 88
page 92
Wireless options (requires option code X and wireless PlantWeb housing)
Update rate
WA(4)
★
User Configurable Update Rate
Operating frequency and protocol
3
★
2.4 GHz DSSS, IEC 62591 (WirelessHART)
www.rosemount.com
25
Rosemount DP Level
March 2015
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Omni-directional wireless antenna
WK(4)
(4)
WM
WN
External Antenna
★
Extended Range, External Antenna
★
High-Gain, Remote Antenna
™
SmartPower
1(17)(18)
★
Adapter for Black Power Module (I.S. Power Module Sold Separately)
Other options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
PlantWeb control functionality
A01(18)(19)(20)
★
FOUNDATION fieldbus Advanced Control Function Block Suite
PlantWeb diagnostic functionality
D01(18)(19)
FOUNDATION fieldbus Diagnostics Suite
★
DA2(21)
Advanced HART Diagnostics Suite
★
Mounting bracket
B4
★
Bracket, all SST, 2-in. pipe panel
Software configuration
C1(22)
★
Custom software configuration (Requires Configuration Data Sheet)
Gage pressure calibration
Gage pressure calibration on Rosemount 3051SAL_ _A4 only
★
C4(19)(22)
NAMUR alarm and saturation levels, high alarm
★
C5(19)(22)
NAMUR alarm and saturation levels, low alarm
★
(19)(22)
Custom alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
(19)(22)
C7
Custom alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
C8(19)(22)
Low alarm (standard Rosemount alarm and saturation levels)
★
C3
Alarm limit
C6
Hardware adjustments
D1(19)(22)(23)
★
Hardware adjustments (zero, span, alarm, security)
Flange adapter
D2
D9
★
1
/2-14 NPT flange adapter
1
RC /2 SST flange adapter
Ground screw
D4(24)
★
External ground screw assembly
Drain/vent valve
D5
26
★
Delete transmitter drain/vent valves (install plugs)
www.rosemount.com
March 2015
Rosemount DP Level
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Conduit plug
DO(25)
★
316 SST Conduit Plug
Product certifications(26)
E1
ATEX Flameproof
★
I1
ATEX Intrinsic Safety
★
IA
ATEX FISCO Intrinsic Safety (FOUNDATION fieldbus protocol only)
★
N1
ATEX Type n
★
K1
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
ND
ATEX Dust
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
I5
FM Intrinsically Safe; Nonincendive
★
IE
FM FISCO Intrinsically Safe (FOUNDATION fieldbus protocol only)
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
E6(27)
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
I6
CSA Intrinsically Safe
★
CSA FISCO Intrinsically Safe (FOUNDATION fieldbus protocol only)
★
IF
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
D3(28)
Measurement Canada Accuracy Approval
★
E7
IECEx Flameproof, Dust Ignition-proof
★
I7
IECEx Intrinsic Safety
★
IG
IECEx FISCO Intrinsic Safety (FOUNDATION fieldbus protocol only)
★
N7
IECEx Type n
★
K7
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n
★
E2
INMETRO Flameproof
★
I2
INMETRO Intrinsic Safety
★
IB
INMETRO FISCO Intrinsic Safety
★
K2
INMETRO Flameproof, Intrinsic Safety
★
E3
China Flameproof
★
I3
China Intrinsic Safety, Dust Ignition-proof
★
EP
Korea Flameproof
★
IP
Korea Intrinsic Safety
★
KP
Korea Flameproof, Intrinsic Safety
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
Technical Regulations Customs Union (EAC) Flameproof, Intrinsic Safety
★
K6
(27)
KM
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB(27)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
KA
(27)
KD
(27)
www.rosemount.com
27
Rosemount DP Level
March 2015
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Shipboard approvals
SBS
American Bureau of Shipping (ABS) Type Approval
★
SBV
Bureau Veritas (BV) Type Approval
★
SDN
Det Norske Veritas (DNV) Type Approval
★
SLL
Lloyds Register (LR) Type Approval
★
Sensor fill fluid
L1(29)
Inert sensor fill fluid
★
Graphite-filled PTFE o-ring
★
O-ring
L2
Bolting material
L4
★
Austenitic 316 SST bolts
(30)
Display type
M5(19)(31)(32)
PlantWeb LCD display
★
M7
Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket
★
M8(19)(31)
Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable, SST bracket
★
Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable, SST bracket
★
(19)(31)
(19)(31)
M9
Pressure testing
P1
Hydrostatic testing with certificate
Special cleaning
P2
Cleaning for special services
P3
Cleaning for less than 1PPM Chlorine/Fluorine
Calibration certification
Q4
Calibration certificate
★
QP
Calibration certificate and tamper evident seal
★
Material traceability certification
Q8
★
Material traceability certification per EN 10204 3.1
Quality certification for safety
QS(19)(22)
Prior-use certificate of FMEDA Data
★
QT(33)
Safety-certified to IEC 61508 with certificate of FMEDA data
★
Toolkit performance reports
QZ
★
Remote Seal System Performance Calculation Report
Transient protection
T1(34)(35)
★
Transient terminal block
Conduit electrical connector
GE(36)
GM
28
(36)
M12, 4-pin, Male Connector (eurofast®)
★
A size Mini, 4-pin, Male Connector (minifast®)
★
www.rosemount.com
March 2015
Rosemount DP Level
Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
NACE certificate
Q15(33)
(33)
Q25
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical model number:
3051SAL 1 C G 2A A 1A 10 20 D FF G 1 DA 0 0
(1) For detailed specifications see “Specifications” on page 114.
(2) Requires PlantWeb housing.
(3) Only intrinsically safe approval codes apply.
(4) Only available with output code X.
(5) Available with output code A only. Available approvals are FM Intrinsically Safe; Nonincendive (option code I5), CSA Intrinsically Safe (option code I6), ATEX Intrinsic Safety
(option code I1), or IECEx Intrinsic Safety (option code I7). Contact an Emerson Process Management representative for additional information.
(6) Low side seal identical to high side seal.
(7) Maximum working pressure (MWP) of the Thermal Range Expander is 1500 psi (103,4 bar).
(8) Thermal Range Expander with SYLTHERM XLT secondary fill fluid is not recommended for use in vacuum applications below 6 psia (400 mbar-a).
(9) Requires separate Rosemount 1199 model number to be selected. With option code 1, user must select Seal Location Option code M (low side of transmitter) in the
Rosemount 1199 Remote Mount Seal System Model.
(10) Capillary Length applies to both high and low side for Balanced Systems. Applies to Low Side Only For Tuned-System Assemblies. Applies to High Side Only for Remote Mount
Single Seal Systems with Capillary.
(11) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70 °F (21 °C). Temperature limits are reduced in vacuum service and may be limited by seal
selection.
(12) For complete process and ambient temperature limits, see Thermal Range Expander temperature operating range on page 122.
(13) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient temperature exceeds 70 °F (21 °C).
(14) This is a food grade fill fluid.
(15) Not suitable for vacuum applications.
(16) Only available with Thermal Range Expander
(17) Long-Life Power Module must be shipped separately, order Power Module 701PBKKF.
(18) Not available with output code A.
(19) Not available with output code X.
(20) With option code 10, user must select Seal Location option code M in Table 7 of Rosemount DP Level PDS.
(21) Requires PlantWeb housing and Output code A. Includes Hardware Adjustments as standard.
(22) Not available with output code F.
(23) Not available with housing style codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(24) This assembly is included with options EP, KP, E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, KD. IA, IB, IE. IF, IG, K2, T1, EM, and KM.
(25) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of carbon steel conduit plug.
www.rosemount.com
29
Rosemount DP Level
March 2015
(26) Valid when SuperModule Platform and housing have equivalent approvals.
(27) Not available with M20 or G ½ conduit entry size.
(28) Requires PlantWeb housing and Hardware Adjustments option code D1. Limited availability depending on transmitter type and range. Contact an Emerson Process
Management representative for additional information.
(29) Silicone fill fluid is standard.
(30) Not available with Housing code 01 or 7J.
(31) Not available with output code F, option code DA2, or option code QT.
(32) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for additional
information.
(33) Not available with output code F or X. Not available with housing code 7J.
(34) Not available with Housing code 5A, 5J, or 7J.
(35) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IB, IE, IF, and IG.
(36) Not available with Housing code 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe; Nonincendive (option code I5) or FM FISCO Intrinsically
Safe (option code IE), install in accordance with Rosemount drawing 03151-1009.
30
www.rosemount.com
March 2015
Rosemount DP Level
Diaphragm seals for 3051SAL
Flush Flanged (FF) Seal

Most common seal

Good for use in general applications

Easy installation on flanged connections ranging from 2-in. (DN 50) to 4-in. (DN 100)
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 4. Flush Flanged (FF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process connection
FF
Flush Flanged Seal
Process connection size
G
7
J
9
ANSI/ASME B16.5
2-in.
3-in.
N/A
4-in.
EN 1092-1/GOST 12815-80
DN 50
N/A
DN 80
DN 100
JIS B2238
50 A
80 A
N/A
100 A
★
★
★
★
Flange / pressure rating
1
2
4
G
5
6
7
H
J
A
B
D
E
★
★
★
★
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 600
PN 40 per EN 1092-1
ANSI/ASME B16.5 Class 900
ANSI/ASME B16.5 Class 1500
ANSI/ASME B16.5 Class 2500
PN 63 per EN 1092-1
PN 100 per EN 1092-1
10K per JIS B2238
20K per JIS B2238
40K per JIS B2238
PN 10/16 per EN 1092-1, Available with DN 100 only
Materials of construction
CA
DA
CB(1)
DB(1)
CC
DC
Isolating diaphragm
Upper housing
Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
CS
316 SST
★
★
★
★
★
★
Flushing connection ring (lower housing)(2)
0
A
B
None
316 SST
Alloy C-276
www.rosemount.com
★
★
★
31
Rosemount DP Level
March 2015
Table 4. Flush Flanged (FF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flushing connection quantity & size
0
1
3
7
9
None
One 1/4-18 NPT Flushing Connection
Two 1/4-18 NPT Flushing Connections
One 1/2-14 NPT Flushing Connection
Two 1/2-14 NPT Flushing Connections
★
★
★
★
★
Options (include with selected model number)
Cold temperature remote seal applications
SB
Extra Fill Fluid for Cold Temperature Applications
Remote seal diaphragm thickness
SC(3)
0.006-in. (150 μm) Diaphragm Thickness
Flushing connection ring plugs
SD
SG
SH
Alloy C-276 Plug(s) for Flushing Connection(s)
SST Plug(s) for Flushing Connection(s)
SST Drain/Vent(s) for Flushing Connection(s)
★
★
★
Flushing connection ring gaskets
S0
SY
SJ
SK
SN
No gasket for lower housing
Thermo-tork TN-9000
PTFE Gasket
Barium Sulfate-Filled PTFE Gasket
Grafoil Gasket
★
★
★
Remote seal diaphragm coating
SZ(3)
SV
0.0002-in. (5 μm) Gold Plated Diaphragm
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 13
ERS Transmitter Options
page 20
Scalable Level Transmitter Options
(1) Not available with option code SC.
(2) Supplied with Thermo-tork TN-9000 gasket if no other flushing connection ring gasket option is selected.
(3) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
32
www.rosemount.com
March 2015
Rosemount DP Level
Extended Flanged (EF) Seal

Good for use in viscous applications with plugging issues

Seal diaphragm installed flush with inner tank wall to prevent process plugging

Easy installation on 3-in. (DN 80) and 4-in. (DN 100) flanged connections
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 5. Extended Flanged (EF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process connection
EF
Extended Flanged Seal
Process connection size
7
9
ANSI/ASME B16.5
3-in. Schedule 80
4-in. Schedule 80
EN 1092-1/GOST 12815-80
DN 80
DN 100
JIS B2238
80A
100A
Extension diameters
2.58-in. (66 mm)
3.50-in. (89 mm)
★
★
Flange/pressure rating
1
2
4
G
5
6
7
H
J
A
B
D
E
★
★
★
★
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 600
PN 40 per EN 1092-1
ANSI/ASME B16.5 Class 900
ANSI/ASME B16.5 Class 1500
ANSI/ASME B16.5 Class 2500
PN 63 per EN 1092-1
PN 100 per EN 1092-1
10K per JIS B2238
20K per JIS B2238
40K per JIS B2238
PN 10/16 per EN 1092-1, Available with DN 100 only
Materials of construction
CA
DA
CB
DB
Isolating diaphragm
316L SST
316L SST
Alloy C-276
Alloy C-276
Extension / gasket surface
316L SST
316L SST
Alloy C-276
Alloy C-276
Mounting flange
CS
316 SST
CS
316 SST
★
★
★
★
Seal extension length
20
40
60
2-in. (50 mm)
4-in. (100 mm)
6-in. (150 mm)
★
★
★
Options (include with selected model number)
Cold temperature remote seal applications
SB
Extra Fill Fluid for Cold Temperature Applications
★
Remote seal diaphragm thickness
SC
0.006-in. (150 μm) Diaphragm Thickness
www.rosemount.com
33
Rosemount DP Level
March 2015
Table 5. Extended Flanged (EF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Remote seal diaphragm coating
SZ
SV
0.0002-in. (5 μm) Gold Plated Diaphragm
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 13
ERS Transmitter Options
page 20
Scalable Level Transmitter Options
34
www.rosemount.com
March 2015
Rosemount DP Level
Remote Flanged (RF) Seal

Designed to improve performance on smaller process connections

Easy installation on flanged connections ranging from 1-in. to 1.5-in. (DN 25– DN 40)
Lower housing/flushing ring required.
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 114 for more information on Material Selection.
Table 6. Remote Flanged (RF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process connection
RF
Remote Flanged Seal
Process connection size
2
4
D
F
1
A
ANSI/ASME B16.5
1-in.
11/2.-in.
N/A
N/A
1
/2-in.
3/4-in.
EN 1092-1/GOST 12815-80
N/A
N/A
DN 25
DN 40
N/A
N/A
JIS B2238
25A
40A
N/A
N/A
N/A
N/A
★
★
★
★
Flange/pressure rating
1
2
4
G
5
6
7
A
B
D
★
★
★
★
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 600
PN 40 per EN 1092-1
ANSI/ASME B16.5 Class 900
ANSI/ASME B16.5 Class 1500
ANSI/ASME B16.5 Class 2500
10K per JIS B2238
20K per JIS B2238
40K per JIS B2238
Materials of construction
CA
DA
CB
DB
CC
DC
Isolating diaphragm
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
Upper housing
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
Flange
CS
316 SST
CS
316 SST
CS
316 SST
★
★
★
★
★
★
Flushing connection ring material (lower housing)(1)
A
B
D
316L SST
Alloy C-276
Plated CS
★
★
★
Flushing connection quantity and size
5
1
3
7
9
None
One ¼-18 NPT Flushing Connection
Two ¼-18 NPT Flushing Connections
One 1/2-14 NPT Flushing Connection
Two 1/2-14 NPT Flushing Connections
www.rosemount.com
★
★
★
35
Rosemount DP Level
March 2015
Table 6. Remote Flanged (RF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Options (include with selected model number)
Cold temperature remote seal application
SB
Extra Fill Fluid for Cold Temperature Applications
★
Remote seal diaphragm thickness
SC(2)
0.006-in. (150 μm) Diaphragm Thickness
Flushing connection ring plugs
SD
SG
SH
Alloy C-276 Plug(s) for Flushing Connection(s)
316 SST Plug(s) for Flushing Connection(s)
316 SST Drain/Vent(s) for Flushing Connection(s)
★
★
★
Flushing ring connection gaskets
SY
SJ
SR
SN
S6
SK
C-4401 Gasket
PTFE Gasket
Ethylene Propylene Gasket
Grafoil Gasket
TopChem 2000
Barium Sulfate-Filled PTFE Gasket
★
★
Remote seal diaphragm coating
SZ(2)
SV
0.0002-in. (5 μm) Gold Plated Diaphragm
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 13
ERS Transmitter Options
page 20
Scalable Level Transmitter Options
(1) Supplied with C-4401 Aramid fiber gasket if no other remote seal gasket material is selected.
(2) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
36
www.rosemount.com
March 2015
Rosemount DP Level
PF Pancake Seal
Table 7. PF Pancake Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process connection
PF
Pancake Seal
★
Process connection size
G
7
J
ANSI
2-in.
3-in.
N/A
EN 1092-1/GOST 12815-80
DN 50
N/A
DN 80
★
★
★
Flange/pressure rating
0
ANSI
No flanged supplied, seal MWP based on customer
supplied flange
9
N/A
1
2
4
G
5
6
7
H
J
Class 150
Class 300
Class 600
N/A
Class 900
Class 1500
Class 2500
N/A
N/A
EN 1092-1/GOST 12815-80
N/A
★
No flanged supplied, seal MWP based on customer
supplied flange
N/A
N/A
N/A
PN40
N/A
N/A
N/A
PN63
PN100
★
★
★
★
★
Diaphragm and wetted, upper housing, flange material
LA(1)
CA(1)
DA(1)
LB
CB
DB
LC
CC
DC
Diaphragm and wetted
316L SST
316L SST
316L SST
Alloy C-276, Seam Welded
Alloy C-276, Seam Welded
Alloy C-276, Seam Welded
Tantalum, Seam Welded
Tantalum, Seam Welded
Tantalum, Seam Welded
Upper housing
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
Flange
None
CS
316 SST
None
CS
316 SST
None
CS
316 SST
★
★
★
★
★
★
★
★
★
Flushing connection ring (lower housing)(2)
0
A
B
None
316 SST
Alloy C-276
★
★
★
Flushing connection quantity & size
0
1
None
One 1/4-18 NPT Flushing Connection
www.rosemount.com
★
★
37
Rosemount DP Level
March 2015
Table 7. PF Pancake Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flushing connection quantity & size
3
7
9
Two 1/4-18 NPT Flushing Connections
One 1/2-14 NPT Flushing Connection
Two 1/2-14 NPT Flushing Connection
★
★
★
Options (include with selected model number)
Flushing connection ring gaskets
S0
SY
SJ
SK
SN
No gasket for lower housing
Thermo-tork TN-9000
PTFE Gasket
Barium Sulfate-Filled PTFE Gasket
Grafoil Gasket
★
★
★
Flushing connection ring plugs
SD
SG
SH
Alloy C-276 Plug(s) for Flushing Connection(s)
SST Plug(s) for Flushing Connection(s)
SST Drain/Vent(s) for Flushing Connection(s)
★
★
★
Remote seal diaphragm thickness
SC(3)
0.006-in. (150 μm) Diaphragm Thickness
Cold temperature remote seal applications
SB
Extra Fill Fluid for Cold Temperature Applications
Remote seal diaphragm coating
SZ(3)
SV
0.0002-in. (5 μm) Gold Plated Diaphragm
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 20
Scalable Level Transmitter Options
(1) For use with customer supplied spiral metallic gaskets.
(2) Supplied with Thermo-tork TN-9000 gasket if no other flushing connection ring gasket option is selected.
(3) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
38
www.rosemount.com
March 2015
Rosemount DP Level
FC Flush Flanged Seal - Ring Type Joint (RTJ) Gasket Surface
Table 8. FC Flush Flanged Seal - Ring Type Joint (RTJ) Gasket Surface Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
_The Expanded offering is subject to additional delivery lead time.
Model
Process connection
FC
Flush Flanged Seal - Ring Type Joint Gasket Surface
Process connection size
G
7
2-in.
3-in.
Flange/pressure rating
1
2
4
5
6
7
Class 150
Class 300
Class 600
Class 900
Class 1500
Class 2500
Diaphragm and wetted, upper housing, flange material
DA
KB
MB
CA
Diaphragm and wetted
316L SST
Alloy C-276
Alloy C-276
316L SST
Upper Housing
316L SST
316L SST
316L SST
316L SST
Flange
316 SST
316 SST
CS
CS
Flushing connection ring material (lower housing)
0
A
B
2
None
316 SST
Alloy C-276
Duplex 2205 SST
Flushing connection quantity and size
0
1
3
7
9
None
One 1/4-18 NPT Flushing Connection
Two 1/4-18 NPT Flushing Connection
One 1/2-14 NPT Flushing Connection
Two 1/2-14 NPT Flushing Connection
Options (include with selected model number)
Flushing ring connection plugs
SD
SG
SH
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Remote seal diaphragm thickness
SC
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and duplex 2507 SST for abrasive applications
Cold temperature remote seal application
SB
Extra fill for cold temp application
www.rosemount.com
39
Rosemount DP Level
March 2015
Table 8. FC Flush Flanged Seal - Ring Type Joint (RTJ) Gasket Surface Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
_The Expanded offering is subject to additional delivery lead time.
Remote seal diaphragm coating
SZ(1)
SV(1)
0.002-in. (5 μm) Gold plated diaphragm
PTFE coated diaphragm for nonstick purposes only
Complete the 3051SAL model number by specifying options as needed:
page 13
ERS Transmitter Options
page 20
Scalable Level Transmitter Options
(1) Only available on 316LSST and Alloy C-276.
40
www.rosemount.com
March 2015
Rosemount DP Level
RC Ring Type Joint (RTJ) Flanged Seal
Table 9. RC Ring Type Joint Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
_The Expanded offering is subject to additional delivery lead time.
Model
Process connection
RC
Flush Flanged Seal - Ring Type Joint Gasket Surface
Process connection size
1
A
2
4
1
/2-in. (Class 150 to 1500 includes mounting ring bolts and mounting studs)
/4-in. (Class 150 includes mounting ring bolts and mounting studs)
1-in.
11/2-in.
3
Flange/pressure rating
1
2
4
5
6
7
Class 150
Class 300
Class 600
Class 900
Class 1500
Class 2500
Diaphragm and wetted, upper housing, flange material
DA
DB
DC
Diaphragm and wetted
Upper housing
Flange
316L SST
Alloy C-276
Tantalum
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
Flushing connection ring material (lower housing)(1)
A
B
F
H
2
V
316L SST
Alloy C-276
304L SST
Titanium Grade 4
Duplex 2205 SST
Alloy 400
Flushing ring connection and size
0
1
3
7
9
None
One 1/4-18 NPT Flushing Connection
Two 1/4-18 NPT Flushing Connection
One 1/2-14 NPT Flushing Connection
Two 1/2-14 NPT Flushing Connection
Options (include with selected model number)
Flushing connection ring gaskets
SY
SJ
SR
SN
S6
SK
C-4401 Gasket
PTFE Gasket
Ethylene Propylene Gasket
Grafoil Gasket
TopChem 2000
Barium Sulfate-Filled PTFE Gasket
www.rosemount.com
★
★
41
Rosemount DP Level
March 2015
Table 9. RC Ring Type Joint Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
_The Expanded offering is subject to additional delivery lead time.
Flushing connection ring plugs
SD
SG
SH
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Remote seal diaphragm thickness
C
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and duplex 2507 SST for abrasive applications
Bolt material (optional)
3(2)
304 SST Bolts (Only available for Stud Bolt Design)
Cold temperature remote seal application
SB
Extra fill for cold temp application
Remote seal diaphragm coating
SZ(3)
SV(3)
0.002-in. (5 μm) Gold plated diaphragm
PTFE coated diaphragm for nonstick purposes only
Complete the 3051SAL model number by specifying options as needed:
page 13
ERS Transmitter Options
page 20
Scalable Level Transmitter Options
(1) Supplied with C-4401 Aramid fiber gasket if no other remote seal gasket material is selected.
(2) Standard stud bolts are Carbon Steel.
(3) Only available on 316LSST and Alloy C-276.
42
www.rosemount.com
March 2015
Rosemount DP Level
Remote Threaded (RT) Seal

For use with threaded process connections (1/4-18 to 1-11.5 NPT)

Rated for use in high-pressure applications (up to 2500 PSI)

Optional flushing connections available
Table 10. RT Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process connection style
RT
★
Remote Threaded Seal
Process connection size
3
1
★
4
3
/4-14 NPT
★
5
1-11.5 NPT
★
1
1
6
11/4 - 11.5 NPT
/2-14 NPT
/4-18 NPT
Pressure rating
0
★
2500 psi
Isolating diaphragm material
Upper housing material
Flange
CA
316L SST
316L SST
CS
★
DA
316L SST
316L SST
316 SST
★
CB
Alloy C-276
316L SST
CS
★
DB
Alloy C-276
316L SST
316 SST
★
CC
Tantalum
316L SST
CS
★
DC
Tantalum
316L SST
316 SST
★
Flushing connection ring material (lower housing)(1)(2)
A
316L SST
★
B
Alloy C-276
★
D
Plated CS
Flushing ring connection quantity & size
1
One 1/4-in. Flushing Connection
★
3
1
Two /4-in. Flushing Connections
★
5
None
★
7
One 1/2-14 NPT Flushing Connection
★
9
1
Two /2-14 NPT Flushing Connection
★
Options (include with selected model number)
Cold temperature remote seal application
SB
Extra Fill Fluid for Cold Temperature Applications
★
Remote seal diaphragm thickness
SC(3)
0.006-in. (150 μm) Diaphragm Thickness
www.rosemount.com
43
Rosemount DP Level
March 2015
Table 10. RT Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Remote seal flushing plug, drain/vent
SD
Alloy C-276 Plug(s) for Flushing Connection(s)
★
SG
316 SST Plug(s) for Flushing Connection(s)
★
SH
316 SST Drain/Vent(s) for Flushing Connection(s)
★
Remote seal gasket material
SY
C-4401 Gasket (for use with Flushing Connection Ring)
★
SJ
PTFE Gasket (for use with Flushing Connection Ring)
★
SR
Ethylene Propylene Gasket (for use with Flushing Connection Ring)
★
SN
Grafoil Gasket (for use with Flushing Connection Ring)
★
S6
TopChem 2000 (for use with Flushing Connection Ring)
SK
Barium Sulfate-Filled PTFE Gasket (for use with Flushing Connection Ring)
Remote seal bolt
S3
304 SST Bolts
S4
316 SST Bolts
★
Remote seal diaphragm coating
SZ(3)
0.0002-in. (5 μm) Gold Plated Diaphragm
SV
PTFE Coated Diaphragm for Non-Stick Purposes
Special Threads in Lower Housing
R9
Male Lower Housing Threads
Complete the 3051SAL model number by specifying options as needed:
page 13
ERS Transmitter Options
page 20
Scalable Level Transmitter Options
(1) Supplied with C-4401 aramid fiber gasket if no other remote seal gasket material is selected.
(2) Flushing Connection Ring/Lower Housing assembly bolts provided as standard are carbon steel.
(3) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
44
www.rosemount.com
March 2015
Rosemount DP Level
Hygienic Tri Clamp (SC) Seal

Good for use in hygienic applications

Easy installation on Tri-Clover style Tri Clamp connections (1.5-in. to 3-in.)

Conforms to 3-A standard 74-03
Table 11. SC Hygienic Tri-Clover Style Tri Clamp Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process connection
SC(1)
★
Tri-Clover Style Tri-Clamp Seal
Process connection size
3(2)(3)
1½-in.
★
5(2)(4)
2-in.
★
7
3-in.
★
Maximum working pressure
0
★
1000 PSI
Isolating diaphragm material
Upper housing material
LA00
316L SST
316L SST
LB00
Alloy C-276
316L SST
★
Options (include with selected model number)
Remote seal diaphragm polishing
R6
Electropolishing
Remote seal diaphragm surface finish
RD
10 μin. (0.25 μm) Ra Diaphragm Surface Finish
RG
15 μin. (0.375 μm) Ra Diaphragm Surface Finish
RH
20 μin. (0.5 μm) Ra Diaphragm Surface Finish
Surface finish certification
Q16(5)
Surface Finish Certification for Hygienic Remote Seals
★
Complete the 3051SAL model number by specifying options as needed:
page 13
ERS Transmitter Options
page 20
Scalable Level Transmitter Options
(1) Clamp and gasket furnished by user. The maximum working pressure is dependent upon the clamp pressure rating.
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
(3) 1000 inH2O or 2490 mbar for 11/2-in. SC.
(4) 150 inH2O or 373 mbar for 2-in. SC.
(5) Q16 is only available when the diaphragm seal has surface finish options (RD, RG, and RH).
www.rosemount.com
45
Rosemount DP Level
March 2015
Hygienic Tank Spud (SS) Seal

Commonly used in hygienic level applications

Seal diaphragm installed flush with inner tank wall

Conforms to 3-A standard 74-03
Table 12. SS Hygienic Tank Spud Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process connection
SS(1)
★
Hygienic Tank Spud Seal
Process connection size
A
★
4-in. Sch. 5 Tri-Clamp
Maximum working pressure (clamp rating)
0
★
600 PSI (41,37 bar)
Upper housing
A
Diaphragm and wetted
AL
BB
★
316L SST
316L SST(2)
Alloy C-276
Extension material
316L SST(2)
316L SST
★
Extension length
2
6
2-in. (50 mm) Extension
6-in. (150 mm) Extension
★
★
Options (include with selected model number)
Remote seal diaphragm thickness
SC
0.006-in. (150 μm) Diaphragm Thickness
Tank spud included with shipment
S1
Tank Spud Included with Shipment
★
Remote seal diaphragm polishing
R6
Electropolishing
Remote seal diaphragm surface finish
RH
RG(3)
20 μin. (0.5 μm) Ra Diaphragm Surface Finish
15 μin. (0.375 μm) Ra Diaphragm Surface Finish
Additional options
Surface finish certification
Q16(4)
Surface Finishing Certification for Hygienic Remote Seals
★
Complete the 3051SAL model number by specifying options as needed:
page 13
ERS Transmitter Options
page 20
Scalable Level Transmitter Options
(1) Clamp and Ethylene Propylene o-ring (conforms to 3-A standard 74 and USP class VI) supplied.
(2) Diaphragm brazed and TIG-welded to extension.
(3) Require Option code R6 (Electropolishing).
(4) Q16 is only available when the diaphragm seal has surface finish options (RG and RH).
46
www.rosemount.com
March 2015
Rosemount DP Level
Rosemount 3051L Level Transmitter
The Rosemount 3051L Level Transmitter combines the performance and capabilities of
Rosemount 3051 Transmitters with the reliability and quality of a direct mount seal in
one model number. 3051L Level Transmitters offer a variety of process connections,
configurations, and fill fluid types to meet a breadth of level applications. Capabilities of
a Rosemount 3051L Level Transmitter include:

Quantify and optimize total system performance (Option code QZ)

Tuned-System Assembly (Option code S1)

Power Advisory can proactively detect degraded electrical loop integrity issues
(Option Code DA0)

Local Operator Interface with straightforward menus and built-in configuration
buttons (Option Code M4)
3051L Level Transmitter
See Specifications and options for more details on each configuration. Specification and selection of product materials, options, or
components must be made by the purchaser of the equipment. See page 124 for more information on Material Selection.
Additional information:
Specifications: page 114
Certifications: page 140
Dimensional Drawings: page 149
Table 13. Rosemount 3051L Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter type
3051L(1)
Level Transmitter
Pressure range
2
–250 to 250 inH2O (-621,60 to 621,60 mbar)
★
3
–1000 to 1000 inH2O (-2,48 to 2,48 bar)
★
4
–300 to 300 psi (-20,68 to 20,68 bar)
★
Transmitter output
A(2)
4–20 mA with Digital Signal Based on HART Protocol
★
F
FOUNDATION fieldbus Protocol
★
W(3)
PROFIBUS® PA Protocol
★
X(4)
Wireless (requires wireless options and engineered polymer housing)
★
M(5)
Low-Power 1-5 Vdc with Digital Signal Based on HART Protocol
Process connection size, material, extension length (high side)
Code
Process connection size
Material
Extension length
G0(6)
2-in./DN 50/A
316L SST
Flush Mount Only
★
H0(6)
2-in./DN 50
Alloy C-276
Flush Mount Only
★
J0
2-in./DN 50
Tantalum
Flush Mount Only
★
(6)
A0
3-in./DN 80
316L SST
Flush Mount
★
A2(6)
3-in./DN 80
316L SST
2-in./50 mm
★
(6)
3-in./DN 80
316L SST
4-in./100 mm
★
A4
www.rosemount.com
47
Rosemount DP Level
March 2015
Table 13. Rosemount 3051L Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
3-in./DN 80
316L SST
6-in./150 mm
★
(6)
B0
4-in./DN 100
316L SST
Flush Mount
★
B2(6)
4-in./DN 100
316L SST
2-in./50 mm
★
(6)
4-in./DN 100
316L SST
4-in./100 mm
★
(6)
B6
4-in./DN 100
316L SST
6-in./150 mm
★
C0(6)
3-in./DN 80
Alloy C-276
Flush Mount
★
(6)
C2
3-in./DN 80
Alloy C-276
2-in./50 mm
★
C4(6)
3-in./DN 80
Alloy C-276
4-in./100 mm
★
(6)
3-in./DN 80
Alloy C-276
6-in./150 mm
★
(6)
D0
4-in./DN 100
Alloy C-276
Flush Mount
★
D2(6)
4-in./DN 100
Alloy C-276
2-in./50 mm
★
(6)
4-in./DN 100
Alloy C-276
4-in./100 mm
★
(6)
D6
4-in./DN 100
Alloy C-276
6-in./150 mm
★
E0
3-in./DN 80
Tantalum
Flush Mount Only
★
F0
4-in./DN 100
Tantalum
Flush Mount Only
★
A6(6)
B4
C6
D4
Mounting flange size, rating, material (high side)
Size
Rating
Material
M
2-in.
ANSI/ASME B16.5 Class 150
CS
★
A
3-in.
ANSI/ASME B16.5 Class 150
CS
★
B
4-in.
ANSI/ASME B16.5 Class 150
CS
★
N
2-in.
ANSI/ASME B16.5 Class 300
CS
★
C
3-in.
ANSI/ASME B16.5 Class 300
CS
★
D
4-in.
ANSI/ASME B16.5 Class 300
CS
★
P
2-in.
ANSI/ASME B16.5 Class 600
CS
★
3-in.
ANSI/ASME B16.5 Class 600
CS
★
(6)
2-in.
ANSI/ASME B16.5 Class 150
316 SST
★
F(6)
3-in.
ANSI/ASME B16.5 Class 150
316 SST
★
(6)
4-in.
ANSI/ASME B16.5 Class 150
316 SST
★
(6)
Y
2-in.
ANSI/ASME B16.5 Class 300
316 SST
★
H(6)
3-in.
ANSI/ASME B16.5 Class 300
316 SST
★
(6)
E
X
G
4-in.
ANSI/ASME B16.5 Class 300
316 SST
★
(6)
2-in.
ANSI/ASME B16.5 Class 600
316 SST
★
L(6)
3-in.
ANSI/ASME B16.5 Class 600
316 SST
★
Q
DN 50
PN 10-40 per EN 1092-1
CS
★
R
DN 80
PN 40 per EN 1092-1
CS
★
S
DN 100
PN 40 per EN 1092-1
CS
★
V
DN 100
PN 10/16 per EN 1092-1
CS
★
K(6)
DN 50
PN 10-40 per EN 1092-1
316 SST
★
(6)
DN 80
PN 40 per EN 1092-1
316 SST
★
DN 100
PN 40 per EN 1092-1
316 SST
★
DN 100
PN 10/16 per EN 1092-1
316 SST
★
4 in.
ANSI/ASME B16.5 Class 600
316 SST
★
N/A
10K per JIS B2238
CS
J
Z
T
U(6)
W
7
(6)
(6)
1
48
www.rosemount.com
March 2015
Rosemount DP Level
Table 13. Rosemount 3051L Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
2
N/A
20K per JIS B2238
CS
3
N/A
40K per JIS B2238
CS
4(6)
N/A
10K per JIS B2238
316 SST
5
(6)
N/A
20K per JIS B2238
316 SST
6
(6)
N/A
40K per JIS B2238
316 SST
Seal fill fluid (high side)
Specific gravity
Temperature limits (7)
D
Silicone 200
0.93
-49 to 401 °F (-45 to 205 °C)
★
F
Silicone 200 for
Vacuum
Applications
0.93
For use in vacuum applications below 14.7 psia (1 bar-a), refer to
vapor pressure curves in Rosemount DP Level Fill Fluid
Specification Technical Note (00840-2100-4016).
★
L
Silicone 704
1.07
32 to 401 °F (0 to 205 °C)(8)
★
C
Silicone 704 for
Vacuum
Applications
1.07
For use in vacuum applications below 14.7 psia (1 bar-a), refer to
vapor pressure curves in Rosemount DP Level Fill Fluid
Specification Technical Note (00840-2100-4016).
★
A
SYLTHERM™ XLT
0.85
-102 to 293 °F (-75 to 145 °C)
★
H
Inert (Halocarbon)
1.85
-49 to 320 °F (-45 to 160 °C)
★
G(9)(10)
Glycerine and Water
1.13
5 to 203 °F (-15 to 95 °C)
★
N(9)
Neobee M-20
0.92
5 to 401 °F (-15 to 205 °C)(8)
★
P(11)(12)
Propylene Glycol
and Water
1.02
5 to 203 F (-15 to 95 °C)
★
Low pressure side
Configuration
Flange adapter Diaphragm material
Sensor fill fluid
11(6)
Gage
SST
316L SST
Silicone
★
21
Differential
SST
316L SST
Silicone
★
22
Differential
SST
Alloy C-276
Silicone
★
2A(13)
Differential
SST
316L SST
Inert (Halocarbon)
★
2B
Differential
SST
Alloy C-276
Inert (Halocarbon)
★
31(6)
Tuned-System
Assembly with
Remote Seal
None
316L SST
Silicone
(requires Option Code S1)
★
(6)
(6)(13)
O-ring
A
★
Glass-filled PTFE
Housing material
Conduit entry size
A
Aluminum
½–14 NPT
★
B
Aluminum
M20 × 1.5
★
J
SST
½–14 NPT
★
K
SST
M20 × 1.5
★
P(14)
Engineered polymer
No conduit entries
★
D(15)
Aluminum
G½
M(15)
SST
G½
www.rosemount.com
49
Rosemount DP Level
March 2015
Table 13. Rosemount 3051L Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Wireless options (requires Wireless Output Code X and Engineered Polymer Housing Code P)
Wireless transmit rate, operating frequency, and protocol
WA3
★
User Configurable Transmit Rate, 2.4GHz WirelessHART
Antenna and SmartPower
WP5
★
Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
HART Revision configuration (requires HART Protocol Output Code A)
HR5(2)
Configured for HART Revision 5
★
(2)
Configured for HART Revision 7
★
HR7
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
PlantWeb control functionality
A01(16)
★
FOUNDATION fieldbus Control Function Block Suite
PlantWeb diagnostic functionality
DA0(24)
D01
(16)
Power Advisory HART Diagnostic
★
FOUNDATION fieldbus Diagnostics Suite
★
Seal assemblies
S1(17)
★
Assembled to One Rosemount 1199 Seal
Product certifications
E8
ATEX Flameproof and Dust Certification
★
I1(18)
ATEX Intrinsic Safety and Dust
★
IA
ATEX FISCO Intrinsic Safety; for FOUNDATION fieldbus or PROFIBUS PA protocols only
★
N1
ATEX Type n Certification and Dust
★
K8
ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E8, I1 and N1)
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
I5(20)
FM Intrinsically Safe, Nonincendive
★
IE
FM FISCO Intrinsically Safe; for FOUNDATION fieldbus or PROFIBUS PA protocols only
★
K5
FM Explosion-proof, Dust Ignition-Proof, Intrinsically Safe, and Division 2
★
C6
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, and Division 2
★
I6(14)
CSA Intrinsic Safety
★
K6
CSA and ATEX Explosion-proof, Intrinsically Safe, and Division 2 (combination of C6, E8, and I1)
★
E7
IECEx Flameproof, Dust Ignition-proof
★
I7
IECEx Intrinsic Safety
★
N7
IECEx Type n Certification
★
K7
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, and Type n (combination of I7, N7 and E7)
★
E2
INMETRO Flameproof
★
I2
INMETRO Intrinsic Safety
★
IB
INMETRO FISCO intrinsically safe; for FOUNDATION fieldbus or PROFIBUS PA protocols only
★
K2
INMETRO Flameproof, Intrinsic Safety
★
(19)
50
www.rosemount.com
March 2015
Rosemount DP Level
Table 13. Rosemount 3051L Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
E3
China Flameproof
★
I3
China Intrinsic Safety
★
N3
China Type n
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
KM
Technical Regulations Customs Union (EAC) Flameproof and Intrinsic Safety
★
KB
FM and CSA Explosion-proof, Dust Ignition Proof, Intrinsically Safe, and Division 2 (combination of K5 and C6)
★
KD
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of K5, C6, I1, and E8)
★
Shipboard approvals
SBS(13)
American Bureau of Shipping
★
SBV(7)(21) Bureau Veritas (BV)
SDN(7)
Det Norske Veritas
SLL(7)(21)
Lloyds Register (LR)
Bolting material
L4
Austenitic 316 SST Bolts
★
L5
ASTM A 193, Grade B7M bolts
★
L6
Alloy K-500 Bolts
★
L8
ASTM A 193 Class 2, Grade B8M Bolts
★
Display and interface options
M4(22)
LCD Display with Local Operator Interface
★
M5
LCD Display
★
Calibration certification
Q4
Calibration Certificate
★
QP
Calibration Certificate and tamper evident seal
★
QG(23)
Calibration Certificate and GOST Verification Certificate
★
Material traceability certification
Q8
Material Traceability Certification per EN 10204 3.1
★
Quality certification for safety
QS(24)
Prior-use certificate of FMEDA data
★
QT(24)
Safety certified to IEC 61508 with certificate of FMEDA
★
Toolkit total system performance reports
QZ
Seal System Performance Calculation Report
★
Conduit electrical connector
GE(13)
M12, 4-pin, Male Connector (eurofast)
★
GM(13)
A size Mini, 4-pin, Male Connector (minifast)
★
Configuration buttons
D4(24)
Analog Zero and Span
★
DZ(25)
Digital Zero Trim
★
Transient protection
T1(13)(26)
Transient Protection
www.rosemount.com
★
51
Rosemount DP Level
March 2015
Table 13. Rosemount 3051L Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Software configuration
C1(25)
Custom Software Configuration (completed CDS 00806-0100-4007 for wired and 00806-0100-4100 for wireless
required with order)
★
Low power output
C2
0.8-3.2 Vdc Output with Digital Signal Based on HART Protocol (available with Output code M only)
Alarm levels
NAMUR alarm and saturation levels, high alarm
★
CN
NAMUR alarm and saturation levels, low alarm
★
CR(24)
Custom alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
(24)
Custom alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
(24)
Rosemount Standard low alarm
★
C4(24)
(24)
CS
CT
Conduit plug
DO(13)
★
316 SST Conduit Plug
Ground screw
V5(13)(27)
★
External Ground Screw Assembly
Lower housing flushing connection options(28)
Ring material
F1
316 SST
Number
Size (NPT)
1
1/4-18 NPT
★
★
F2
316 SST
2
1/4-18 NPT
F3
Alloy C-276
1
1
/4-18 NPT
★
★
F4
Alloy C-276
2
1/4-18 NPT
F7
316 SST
1
1/2-14 NPT
★
2
1
/2-14 NPT
★
★
★
F8
316 SST
F9
Alloy C-276
1
1/2-14 NPT
F0
Alloy C-276
2
1/2-14 NPT
Lower housing intermediate gasket material
S0
No Gasket for lower housing
★
SY
Thermo-Tork TN-9000
★
NACE certificate
Q15(29)
(29)
Q25
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical model number: 3051L 2 A A0 D 21 A A F1
(1) Select Configuration Buttons (option code D4 or DZ) or Local Operator Interface (option code M4) if local configuration buttons are required.
(2) Option HR5 configures the HART output to HART Revision 5. Option HR7 configures the HART output to HART Revision 7. The device can be field configured to
HART Revision 5 or 7 if desired. HART Revision 5 is the default HART output.
(3) Option code M4 - LCD Display with Local Operator Interface required for local addressing and configuration.
(4) Requires wireless options and engineered polymer housing. Available approvals are FM Intrinsically Safe, (option code I5), CSA Intrinsically Safe (option code I6),
ATEX Intrinsic Safety (option code I1), IECEx Intrinsic Safety (option code I7) and EAC Intrinsic Safety (option code IM).
52
www.rosemount.com
March 2015
Rosemount DP Level
(5) Only available with C6, E2, E5, I5, K5, KB and E8 approval. Not available with GE, GM, SBS, DA0, M4, D4, DZ, QT, HR5, HR7, CR, CS, CT.
(6) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(7) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70 °F (21 °C). Temperature limits are reduced in vacuum service.
(8) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient, temperature exceeds 70 °F (21 °C).
(9) This is a food grade fill fluid.
(10) Not suitable for vacuum applications
(11) This is a food grade fill fluid.
(12) Not suitable for vacuum applications
(13) Not available with Wireless output(output code X).
(14) Only available with Wireless output(output code X).
(15) Not available with Product certifications options E8, K8, E5, K5, C6, K6, E7, K7, E2, K2, E3, KB, KD.
(16) Only valid with FOUNDATION fieldbus output(output code F).
(17) “Assemble-to” items are specified separately and require a completed model number.
(18) Dust approval not applicable to output code X. See “IEC 62591 (WirelessHART Protocol)” on page 147 for wireless approvals.
(19) Only available with output codes A - 4-20mA HART, F - FOUNDATION fieldbus, and W - PROFIBUS PA. Also only available with G1/2 housing thread types.
(20) Nonincendive certification not provided with Wireless output option code (X).
(21) Only available with product certifications E7, E8, I1, I7, IA, K7, K8, KD, N1, N7.
(22) Not available with FOUNDATION fieldbus (Output Code F) or Wireless output (Output Code X) or Low Power (Output Code M).
(23) Contact an Emerson Process Management representative for availability.
(24) Only available with HART 4-20 mA output(output code A).
(25) Only available with 4-20 mA HART output (Output Code A) and Wireless output (Output Code X).
(26) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IB, and IE.
(27) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(28) Supplied with C-4401 aramid fiber gasket.
(29) NACE compliant wetted materials are identified by Footnote 6.
www.rosemount.com
53
Rosemount DP Level
March 2015
Rosemount 2051L Liquid Level Transmitter
Transmitter output code
Configuration
2051L Liquid Level
Transmitter
4-20 mA HART
2051
2051 with Selectable HART(1)
A
Lower Power
2051
2051 with Selectable HART(1)
M
FOUNDATION fieldbus
F
PROFIBUS
W
Wireless
X
(1) The 4-20mA with Selectable HART device can be ordered with Transmitter
Output option code A plus any of the following options codes: M4, QT, DZ,
CR, CS, CT, HR5, HR7.
Additional information
Specifications: page 114
Certifications: page 149
Dimensional Drawings: page 155
See Specifications and options for more details on each configuration. Specification and selection of product materials, options, or
components must be made by the purchaser of the equipment. See page 124 for more information on Material Selection.
Table 14. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Model
Transmitter type
2051L
Liquid Level Transmitter
★
Pressure range
2
–250 to 250 inH2O (–0,6 to 0,6 bar)
★
3
–1000 to 1000 inH2O (–2,5 to 2,5 bar)
★
4
–300 to 300 psi (–20,7 to 20,7 bar)
★
Transmitter output
A(1)
4–20 mA with Digital Signal Based on HART Protocol
★
F
FOUNDATION fieldbus Protocol
★
W
PROFIBUS PA Protocol
★
X
Wireless
★
M
Low-Power, 1–5 V dc with Digital Signal Based on HART Protocol
54
www.rosemount.com
March 2015
Rosemount DP Level
Table 14. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Process connection size, diaphragm material (high side)
G
Process Connection Size
Diaphragm
(2)
2 in./DN 50
316L SST
★
(2)
2 in./DN 50
Alloy C-276
★
H
2 in./DN 50
Tantalum
★
(2)
3 in./DN 80
316L SST
★
(2)
4 in./DN 100
316L SST
★
(2)
3 in./DN 80
Alloy C-276
★
D(2)
4 in./DN 100
Alloy C-276
★
E
3 in./DN 80
Tantalum
★
F
4 in./DN 100
Tantalum
★
J
A
B
C
Extension length (high side)
0
None, Flush Mount
★
2
2 in./50 mm
★
4
4 in./100 mm
★
6
6 in./150 mm
★
Mounting flange size, rating, material (high side)
Size
Rating
Material
M
2-in.
ANSI/ASME B16.5 Class 150
CS
★
A
3-in.
ANSI/ASME B16.5 Class 150
CS
★
B
4-in.
ANSI/ASME B16.5 Class 150
CS
★
N
2-in.
ANSI/ASME B16.5 Class 300
CS
★
C
3-in.
ANSI/ASME B16.5 Class 300
CS
★
D
4-in.
ANSI/ASME B16.5 Class 300
CS
★
X(2)
2-in.
ANSI/ASME B16.5 Class 150
SST
★
F(2)
3-in.
ANSI/ASME B16.5 Class 150
SST
★
G(2)
4-in.
ANSI/ASME B16.5 Class 150
SST
★
Y(2)
2-in.
ANSI/ASME B16.5 Class 300
SST
★
H(2)
3-in.
ANSI/ASME B16.5 Class 300
SST
★
(2)
4-in.
ANSI/ASME B16.5 Class 300
SST
★
Q
DN50
PN 10-40 per EN 1092-1
CS
★
R
DN80
PN 40 per EN 1092-1
CS
★
K(2)
DN50
PN 10-40 per EN 1092-1
SST
★
T(2)
DN80
PN 40 per EN 1092-1
SST
★
J
www.rosemount.com
55
Rosemount DP Level
March 2015
Table 14. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Seal fill fluid (high side)
Specific gravity at
77°F (25 °C)
Temperature limits (3)
D
Silicone 200
0.93
-49 to 401 °F (-45 to 205 °C)
F
Silicone 200
for Vacuum Applications
0.93
For use in vacuum applications below 14.7 psia (1 bar-a),
refer to vapor pressure curves in Rosemount DP Level Fill
Fluid Specification Technical Note (00840-2100-4016).
L
Silicone 704
for Vacuum Applications
1.07
For use in vacuum applications below 14.7 psia (1 bar-a),
refer to vapor pressure curves in Rosemount DP Level Fill
Fluid Specification Technical Note (00840-2100-4016).
C
Silicone 704
1.07
32 to 401 °F (0 to 205 °C)(4)
★
A
SYLTHERM XLT
0.85
-102 to 293 °F (-75 to 145 °C)
★
H
Inert (Halocarbon)
1.85
-49 to 320 °F (-15 to 160 °C)
★
G(5)(6)
Glycerin and Water
1.13
5 to 203 °F (-15 to 95 °C)
★
N(5)
Neobee M-20
0.92
5 to 401 °F (-15 to 205 °C)(4)
★
P(5)(6)
Propylene Glycol and
Water
1.02
5 to 203 °F (-15 to 95 °C)
★
★
Sensor module configuration, flange adapter (low side)
Configuration
Flange adapter
1
Gage
SST
★
2
Differential
SST
★
3(7)
Tuned-System with Remote Seal
None
★
Sensor module diaphragm material, sensor fill fluid (low side)
Diaphragm material
Sensor fill fluid
1
316L SST
Silicone
★
2
Alloy C-276 (SST Valve Seat)
Silicone
★
7
Alloy C-276 (Alloy C-276 Valve Seat)
Silicone
★
316L SST
Inert (Halocarbon)
★
Alloy C-276 (SST Valve Seat)
Inert (Halocarbon)
★
Alloy C-276 (Alloy C-276 Valve Seat)
Inert (Halocarbon)
★
A(8)
B
(2)(4)
G(4)
O-ring
A
★
Glass-filled PTFE
Housing material
Conduit entry size
A
Aluminum
½–14 NPT
★
B
Aluminum
M20 × 1.5
★
J
SST
½–14 NPT
★
K(9)
SST
M20 × 1.5
★
P(10)
Engineered Polymer
No Conduit Entries
★
56
www.rosemount.com
March 2015
Rosemount DP Level
Table 14. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
D
Aluminum
G½
M(5)
SST
G½
Wireless options (requires Wireless output code X and Engineered Polymer housing code P)
Wireless transmit rate, operating frequency and protocol
WA3
User Configurable Transmit Rate, 2.4GHz WirelessHART
★
Antenna and SmartPower
WP5
Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
★
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
PlantWeb control functionality
A01(11)
FOUNDATION fieldbus Advanced Control Function Block Suite
★
Seal assemblies
S1(12)
Assemble to One Rosemount 1199 Seal (requires 1199M)
★
Product certifications
E1(5)
ATEX Flameproof
★
E2(5)
INMETRO Flameproof
★
E3(5)
China Flameproof
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
E6
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
E7
IECEx Flameproof
★
EW(5)
India (CCOE) Flameproof Approval
★
I1(5)
ATEX Intrinsic Safety
★
(5)
(5)
INMETRO Intrinsically Safe
★
I3(5)
China Intrinsic Safety
★
I4(5)(6)
TIIS Intrinsic Safety
★
I5
FM Intrinsically Safe, Division 2
★
I6
CSA Intrinsically Safe
★
I7(5)
IECEx Intrinsic Safety
★
IA(7)
ATEX FISCO Intrinsic Safety
★
IE(7)
FM FISCO Intrinsically Safe
★
IF(7)
CSA FISCO Intrinsically Safe
★
I2
www.rosemount.com
57
Rosemount DP Level
March 2015
Table 14. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
IG(7)
IECEx FISCO Intrinsically Safe
★
IW(5)
India (CCOE) Intrinsically Safety Approval
★
K1(5)
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
K2
INMETRO Flameproof and Intrinsic Safety
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
(5)
IECEx Flameproof, Intrinsic Safety, Type n and Dust
★
(5)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC(5)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(5)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
N1(5)
ATEX Type n
★
N7(5)
IECEx Type n
★
ND(5)
ATEX Dust
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
KM
Technical Regulations Customs Union (EAC) Flameproof and Intrinsic Safety
★
K6
K7
KA
Shipboard approvals
SBS(4)
American Bureau of Shipping (ABS) Type Approval
★
SBV(4)
Bureau Veritas (BV) Type Approval
★
SDN(4)
Det Norske Veritas (DNV) Type Approval
★
SLL(4)
Lloyds Register (LR) Type Approval
★
Display and interface options
M4(13)
LCD Display with Local Operator Interface
★
M5
LCD Display
★
Hardware adjustments
D4(14)
Zero and Span Configuration Buttons
★
DZ(15)
Digital Zero Trim
★
Flange adapters
DF(16)
1/2-14 NPT Flange Adapters
★
316 SST Conduit Plug
★
External Ground Screw Assembly
★
Conduit plug
DO(4)(17)
Ground screw
V5(4)(18)
58
www.rosemount.com
March 2015
Rosemount DP Level
Table 14. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Transient protection
T1(4)(19)
★
Transient Terminal Block
Software configuration
C1(11)
Custom Software Configuration (requires completed Configuration Data Sheet)
★
C4(10)(20)
NAMUR alarm and saturation levels, high alarm
★
CN(10)(16)
NAMUR alarm and saturation levels, low alarm
★
CR(10)
Custom Alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
CS(10)
Custom Alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
CT(10)
Low Alarm (standard Rosemount alarm and saturation levels)
★
Alarm limit
Calibration certification
Q4
Calibration Certificate
★
QG
Calibration Certificate and GOST Verification Certificate
★
GP
Calibration Certificate and tamper evident seal
★
Material traceability certification
Q8
★
Material Traceability Certification per EN 10204 3.1
Quality certification for safety
QS(21)
Prior-use certificate of FMEDA data
★
QT(17)
Safety Certified to IEC 61508 with certificate of FMEDA
★
Toolkit total system performance reports
QZ
★
Remote Seal System Performance Calculation Report
Conduit electrical connector
GE(4)
M12, 4-pin, Male Connector (eurofast)
★
GM(4)
A size Mini, 4-pin, Male Connector (minifast)
★
Lower housing flushing connection options(22)
Ring material
Number
Size (NPT)
F1
316 SST
1
1/4-18 NPT
★
F2
316 SST
2
1
★
1
1
★
2
1
/4-18 NPT
★
★
F3(23)
F4(19)
Alloy C-276
Alloy C-276
/4-18 NPT
/4-18 NPT
F7
316 SST
1
1/2-14 NPT
F8
316 SST
2
1
★
F9
Alloy C-276
1
1
/2-14 NPT
★
2
1/2-14 NPT
★
F0
Alloy C-276
www.rosemount.com
/2-14 NPT
59
Rosemount DP Level
March 2015
Table 14. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Lower housing intermediate gasket material
S0
No Gasket for lower housing
★
SY
Thermo-Tork TN-9000
★
NACE certificate
Q15(24)
(18)
Q25
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical model number:
2051L 2 A A0 X D 21 A A B4 M5 F1
(1) HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART Revision 7. To order HART
Revision 7 factory configured, add option code HR7.
(2) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments. Order with Q15 or Q25 to receive a NACE certificate.
(3) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70 °F (21 °C). Temperature limits are reduced in vacuum service.
(4) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient, temperature exceeds 70 °F (21 °C).
(5) This is a food grade fill fluid.
(6) Not suitable for vacuum applications.
(7) Requires option code S1.
(8) Not available with output code X.
(9) Not available with Low Power output code M.
(10) Only available with output code X.
(11) Only valid with FOUNDATION fieldbus output code F.
(12) “Assemble-to” items are specified separately and require a completed model number.
(13) Not valid with FOUNDATION fieldbus output code F and Wireless Output Code X.
(14) Only available with 4-20 mA HART (output codes A and M).
(15) Only available with HART 4-20 mA output(output codes A) and Wireless output(output code X).
(16) Not available with Remote Mount Seal Assembly option S1.
(17) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(18) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(19) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IE, IF, and IG.
(20) NAMUR-Compliant operation is pre-set at the factory.
(21) Only available with HART 4-20 mA output(output code A).
(22) Supplied with C-4401 aramid fiber gasket.
60
www.rosemount.com
March 2015
Rosemount DP Level
(23) Not available with Option Codes A0, B0, and G0.
(24) NACE Compliant wetted materials are identified by footnote (2).
www.rosemount.com
61
Rosemount DP Level
March 2015
Rosemount 1199 Direct Mount Seal Systems
Rosemount 1199 Direct Mount Seals reduce installation costs by eliminating mounting
hardware. Their advanced design also minimizes oil volume improving performance.
Product features and capabilities include:
Tuned-System Assembly Comprised of 1199
Direct Mount Seal combined with 1199
Remote Mount Seal

Direct Mount gage or absolute seal system can be used for open or vented to
atmosphere tank applications

Tuned-System Assembly order codes can be used to improve performance for DP
measurements in closed or pressurized tank applications

Variety of process connections

Quantified performance for the entire transmitter / seal assembly
(QZ option)
Additional Information:
Specifications: page 114
Dimensional Drawings: page 155
Rosemount 1199 Direct Mount Seal
The 1199 Direct Mount Seal also requires specification of a Rosemount pressure transmitter. See the appropriate Product Data Sheet
for the desired transmitter and include the option indicated in the table below for the configuration desired.
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 15. When ordering Rosemount 1199 Direct and Remote Mount Seals, add the correct seal system ordering
code to the transmitter model.
Transmitter model
2 Seals
1 Seal
3051S_C
3051C
2051C
3051S_T
3051T, 2051T, 2088
B12
S2
S2
N/A
N/A
B11
S1
S1
B11
S1
A 1199 Direct Mount Seal consists of 2 parts. First, specify the direct mount connection model codes found on page 63. Then, specify
a remote seal found on page 65.
Ordering Codes
1199 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Direct Mount Connection page 63
62
Seal Connection page 65
www.rosemount.com
March 2015
Rosemount DP Level
Table 16. Rosemount 1199 Direct Mount Seal Systems Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Product description
1199
Seal Systems
Connection type
Seal system
Seal location
All Coplanar Transmitters (3051S_C, 3051C, and 2051C)
Welded-Repairable
One or Two Seal System
High Side of Transmitter
★
(1)
R
All Welded
One Seal System
High Side of Transmitter
★
T(1)
All Welded
Two Seal System
High Side of Transmitter
★
N/A
★
W
All In-Line Transmitters (3051S_T, 3051T, 2051T, 2088)
W
All Welded
Seal fill fluid
One Seal System
Specific
gravity at 77
°F (25 °C)
D
Silicone 200
0.93
F
Silicone 200 for
Vacuum
Applications
0.93
L
Silicone 704
1.07
C
Silicone 704 for
Vacuum
Applications
1.07
R
Silicone 705
1.09
V
Silicone 705 for
Vacuum
Applications
1.09
A
SYLTHERM XLT
0.85
H
G(4)(5)
Inert
(Halocarbon)
Glycerine and
Water
1.85
1.13
Temperature limits(2)
No extension
2-in. (50 mm)
extension
4-in. (100 mm)
extension
Thermal optimizer
-49 to 401 °F
-49 to 401 °F
-49 to 401 °F
-49 to 401 °F
(-45 to 205 °C) (-45 to 205 °C)
(-45 to 205 °C)
(-45 to 205 °C)
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor
pressure curves in Rosemount DP Level Fill Fluid Specification technical note
(00840-2100-4016).
32 to 401 °F
32 to 464 °F
32 to 500 °F
32 to 599 °F
(0 to 205 °C)(3) (0 to 240 °C)(3)
(0 to 260 °C)(3)
(0 to 315 °C)
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor
pressure curves in Rosemount DP Level Fill Fluid Specification technical note
(00840-2100-4016).
68 to 401 °F(3)
68 to 464 °F(3) (20 68 to 500 °F(3) (20 68 to 698 °F (20
to 370 °C)
(20 to 205 °C)
to 240 °C)
to 260 °C)
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor
pressure curves in Rosemount DP Level Fill Fluid Specification Technical Note
(00840-2100-4016).
-102 to 293 °F
-102 to 293 °F
102 to 293 °F
102 to 293 °F
(-75 to 145 °C) (-75 to 145 °C)
(-75 to 145 °C)
(-75 to 145 °C)
-49 to 320 °F
-49 to 320 °F
-49 to 320 °F
-49 to 320 °F
(-45 to 160 °C) (-45 to 160 °C)
(-45 to 160 °C)
(-45 to 160 °C)
5 to 203 °F
5 to 203 °F
5 to 203 °F
5 to 203 °F
(-15 to 95 °C)
(-15 to 95 °C)
(-15 to 95 °C)
(-15 to 95 °C)
★
★
★
★
★
★
★
★
★
N(4)
Neobee M-20
0.92
5 to 401 °F(3)
(-15 to 205 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
★
P(4)(5)
Propylene
Glycol and
Water
1.02
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
★
Seal connection type
A
Direct Mount
www.rosemount.com
★
63
Rosemount DP Level
March 2015
Table 16. Rosemount 1199 Direct Mount Seal Systems Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Direct mount connection type
Extension length
Seal system
Connection type
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Welded-Repairable
Welded-Repairable
All Welded
All Welded
Welded-Repairable
Welded-Repairable
All Welded
All Welded
Welded-Repairable
Welded-Repairable
All Welded
All Welded
★
★
★
★
★
★
★
★
★
★
★
★
One Seal System
One Seal System
All Welded
All Welded
★
★
All Coplanar Transmitters (3051S_C, 3051C and 2051C)
94
93
96
97
B4
B3
B6
B7
D4
D3
D6
D7
Direct Mount, No Extension
Direct Mount, No Extension
Direct Mount, No Extension
Direct Mount, No Extension
Direct Mount, 2 in. (50 mm) Extension
Direct Mount, 2 in. (50 mm) Extension
Direct Mount, 2 in. (50 mm) Extension
Direct Mount, 2 in. (50 mm) Extension
Direct Mount, 4 in. (100 mm) Extension
Direct Mount, 4 in. (100 mm) Extension
Direct Mount, 4 in. (100 mm) Extension
Direct Mount, 4 in. (100 mm) Extension
All In-Line Transmitters (3051S_T, 3051T, 2051T, 2088)
95
D5
Direct Mount, No Extension
Thermal Optimizer
(1) All welded system connection types require either a 316L SST or Alloy C-276 isolating diaphragm in the pressure transmitter model codes.
(2) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70 °F (21 °C).
(3) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient temperature exceeds 70 °F (21 °C).
(4) This is a food grade fill fluid.
(5) Not suitable for vacuum applications.
64
www.rosemount.com
March 2015
Rosemount DP Level
Continue specifying a completed model number by choosing a remote seal type below:
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
● = Transmitter availability
— = Unavailable
Flanged seal assemblies
Coplanar
extensions
In-Line
0 in.
page 75
FFW Flush Flanged Seal
●
(1)
Process connections
2-in. 4-in.
●
●
2-in. / DN 50 / 50A
3-in. / DN 80 / 80A
4-in. / DN 100 / 100A
★
1
page 78
RFW Flanged Seal
●
●
—
●
/2-in. / DN 15
3/4-in.
1-in. / DN 25 / 25A
11/2-in. / DN 40 / 40A
page 81
EFW Extended Flanged Seal
●
(1)
●
●
1 1/2-in. / DN 40 / 40A
2-in. / DN 50 / 50A
3-in. / Headbox
/ DN 80 / 80A
4-in. / Headbox
/ DN 100 / 100A
page 86
FCW Flush Flanged Seal – Ring Type
Joint (RTJ) Gasket Surface
●
(1)
●
●
2-in.
3-in.
page 88
RCW Ring Type Joint (RTJ) Flanged Seal
●
—
●
●
½-in.
¾-in.
1-in.
1 ½-in.
page 91
FUW and FVW Flush Flanged Type
Seals
●
●
●
●
DN 50
DN 80
Threaded seal assemblies
Coplanar
extensions
In-Line
0 in.
page 92
www.rosemount.com
RTW Threaded Seal
●
—
★
★
Process connections
2-in. 4-in.
●
●
¼ –18 NPT
3/8 –18 NPT
½ –14 NPT
¾ –14 NPT
1 – 11.5 NPT
1 ¼ –11.5 NPT
1 ½ –11.5 NPT
G1/2 A DIN 16288
R1/2 per ISO 7/1
★
65
Rosemount DP Level
March 2015
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
page 95
HTS Male Threaded Seal
Hygienic seal assemblies
●
●
●
Coplanar
extensions
In-Line
0 in.
66
●
G1
G1 ½
G2
1-11.5 NPT
1 ½ -11.5 NPT
2-11.5 NPT
Process connections
2-in. 4-in.
page 96
SCW Hygienic Tri-Clover Style Tri Clamp
Seal
●
●
●
●
1 ½-in.
2-in.
2 ½-in.
3-in.
4-in.
page 98
SSW Hygienic Tank Spud Seal
●
●
●
●
2-in. Extension
6-in. Extension
page 101
STW Hygienic Thin Wall Tank Spud Seal
●
—
●
●
0.8 in Extension
page 102
EES Hygienic Flanged Tank Spud
Extended Seal
●
●
●
●
DN 50
DN 80
page 103
VCS Tri-Clamp™ In-Line Seal
●
—
—
—
1-in.
1 ½-in.
2-in.
3-in.
4-in.
page 104
SVS VARIVENT Compatible Hygienic
Connection Seal
●
●
●
●
Tuchenhagen
VARIVENT®
Compatible
page 105
SHP Hygienic Cherry-Burrell “I” Line
Seal
●
—
—
—
2-in.
3-in.
page 106
SLS Dairy Process Connection - Female
Thread Seal per DIN 11851
●
—
—
—
DN 40
DN 50
★
★
www.rosemount.com
March 2015
Rosemount DP Level
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Specialty seal assemblies
Coplanar
extensions
In-Line
0 in.
●
page 107
WSP Saddle Seal
—
page 109
UCP Male Threaded Pipe Mount Seals
and PMW Paper Mill Sleeve Seals
●
—
page 110
CTW Chemical Tee Seal
●
—
Process connections
2-in. 4-in.
●
2-in.
3-in.
4-in. or Larger
—
—
1 ½-in. with Threaded
Knurled Nut
1-in. with Cap Screw
Retainer
●
●
Retro-fit
●
page 111
TFS Wafer Style In-Line Seal
●
—
—
—
1-in. / DN 25
1 ½-in. / DN 40
2-in. / DN 50
3-in. / DN 80
4-in. / DN 100
page 112
WFW Flow-Thru Flanged Seal
●
—
●
●
1-in.
2-in.
3-in.
(1) Available with ANSI Class 300 or EN 1092-1 PN 40 or JIS B2238 20K or lower flange ratings.
www.rosemount.com
67
Rosemount DP Level
March 2015
Rosemount 1199 Remote Mount Seal Systems
Rosemount 1199 Remote Mount Seals are used commonly at the top of the vessel when
a DP measurement is required. The capillary that is used is available in three different
diameters to optimize time response and reduce temperature effects.
Product features and capabilities include:
Tuned-System Assembly Comprised of
1199 Direct Mount Seal combined with
1199 Remote Mount Seal

Remote Mount Seals can be used for high temperature applications

Remote Mount Seals are used on the low pressure side of the transmitter for
Tuned-System Assemblies that can be used for DP measurements in closed or
pressurized tank applications

Variety of process connections

Quantified performance for the entire transmitter / seal assembly (QZ option)
Additional Information:
Specifications: page 114
Certifications: page 149
Dimensional Drawings: page 155
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 128 for more information on Material Selection.
Rosemount 1199 Remote Mount Seal
The 1199 Remote Mount Seal also requires specification of a Rosemount pressure transmitter. See the appropriate Product Data
Sheet for the desired transmitter and include the option indicated in the table below for the configuration desired.
Table 17. When ordering Rosemount 1199 Direct and Remote Mount Seals, make sure to add the correct seal
system ordering code to the transmitter model.
Transmitter model
2 Seals
1 Seal
3051S_C
3051C
2051C
3051S_T
3051T, 2051T, 2088
B12
S2
S2
N/A
N/A
B11
S1
S1
B11
S1
68
www.rosemount.com
March 2015
Rosemount DP Level
A 1199 Remote Mount Seal consists of 2 parts. First, specify the capillary model codes found on page 69. Then, specify a remote seal
found on page 72.
Ordering codes
1199 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Remote Mount Connection page 69
Seal Connection page 72
Capillary/fill fluid
Note
Use Table 18 on page Wireless-69 for Capillary Type Connections. Use Table 16 on page Wireless-63 for Direct Mount Type
Connections.
Table 18. Rosemount 1199 Remote Mount Seal Systems Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model Product description
1199
Seal System
Connection type
Seal system
Seal location
All Coplanar Transmitters (3051S_C, 3051C, and 2051C)
W
Welded-Repairable
M
Welded-Repairable
D
Welded-Repairable
One or Two Seal
System
One or Two Seal
System
Two Seal System
R(1)
All Welded
(1)
S(1)
T
High Side of Transmitter
★
Low Side of Transmitter
★
Balanced System - Same Seal on Low and High Side
★
One Seal System
High Side of Transmitter
★
All Welded
Two Seal System
High Side of Transmitter
★
All Welded
Two Seal System
Low Side of Transmitter
★
N/A
★
All In-Line Transmitters (3051S_T, 3051T, 2051T, 2088)
W
All Welded
One Seal System
Seal fill fluid
Specific gravity at
Temperature limits(2)
77 °F (25 °C)
D
Silicone 200
0.93
F
Silicone 200 for Vacuum
Applications
0.93
L(3)
Silicone 704
1.07
C
Silicone 704 for Vacuum
Applications
1.07
R (3)
Silicone 705
1.09
V
Silicone 705 for Vacuum
Applications
1.09
A
H
SYLTHERM XLT
Inert (Halocarbon)
G(5)(6)
N(5)
P(5)(6)
–49 to 401 °F (–45 to 205 °C)
For use in vacuum applications below 14.7 psia (1 bar-a),
refer to vapor pressure curves in Rosemount DP Level Fill
Fluid Specification technical note (00840-2100-4016).
★
32 to 599 °F (0 to 315 °C)(4)
For use in vacuum applications below 14.7 psia (1 bar-a),
refer to vapor pressure curves in Rosemount DP Level Fill
Fluid Specification technical note (00840-2100-4016).
★
★
0.85
1.85
68 to 698 °F (20 to 370 °C)(4)
For use in vacuum applications below 14.7 psia (1 bar-a),
refer to vapor pressure curves in Rosemount DP Level Fill
Fluid Specification technical note (00840-2100-4016).
–102 to 293 °F (–75 to 145 °C)
–49 to 320 °F (–45 to 160 °C)
Glycerin and Water
1.13
5 to 203 °F (–15 to 95 °C)
★
Neobee M-20
0.92
5 to 437 °F (–15 to 225 °C)
★
Propylene Glycol and Water
1.02
5 to 203 °F (–15 to 95 °)
★
www.rosemount.com
(4)
★
★
★
★
★
69
Rosemount DP Level
March 2015
Table 18. Rosemount 1199 Remote Mount Seal Systems Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Seal connection type/capillary ID, description
B
C
D
E
F
G
H
J
K
M
N
P
★
★
★
★
★
★
★
★
★
★
★
★
0.03-in. (0.711 mm) ID
0.04-in. (1.092 mm) ID
0.075-in. (1.905 mm) ID
0.03-in. (0.711 mm) ID, PVC Coated with Closed End
0.04-in. (1.092 mm) ID, PVC Coated with Closed End
0.075-in. (1.905 mm) ID, PVC Coated with Closed End
0.03-in. (0.711 mm) ID, 4-in. Support Tube
0.04-in. (1.092 mm) ID, 4-in. Support Tube
0.075-in. (1.905 mm) ID, 4-in. Support Tube
0.03-in. (0.711 mm) ID, PVC Coated, 4-in. Support Tube with Closed End
0.04-in. (1.092 mm) ID, PVC Coated, 4-in. Support Tube with Closed End
0.075-in. (1.905 mm) ID, PVC Coated, 4-in. Support Tube with Closed End
Capillary length(7)
01
05
10
15
20
51
52
53
54
55
56
57
58
59
60
25
30
35
40
45
50
61
62
63
64
65
66
67
68
69
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
1 ft (0.3 m)
5 ft (1.5 m)
10 ft (3.0 m)
15 ft (4.5 m)
20 ft (6.1 m)
1.6 ft (0.5 m)
3.3 ft (1.0 m)
4.9 ft (1.5 m)
6.6 ft (2.0 m)
8.2 ft (2.5 m)
9.8 ft (3.0 m)
11.5 ft (3.5 m)
13.1 ft (4.0 m)
16.4 ft (5.0 m)
19.7 ft (6.0 m)
25 ft (7.6 m)
30 ft (9.1 m)
35 ft (10.7 m)
40 ft (12.2 m)
45 ft (13.7 m)
50 ft (15.2 m)
23 ft (7.0 m)
26.2 ft (8.0 m)
29.5 ft (9.0 m)
32.8 ft (10.0 m)
36.1 ft (11.0 m)
39.4 ft (12.0 m)
42.6 ft (13.0 m)
45.9 ft (14.0 m)
49.2 ft (15.0 m)
(1) All welded system connection types require either a 316L SST or Alloy C-276 isolating diaphragm in the pressure transmitter model codes.
70
www.rosemount.com
March 2015
Rosemount DP Level
(2) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F and must be further derated if ambient, temperature exceeds 70 °F (21 °C).
(3) Only available with Seal Connection Type \ Capillary ID, Description codes D, G, K, and P.
(4) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient temperature exceeds 70 °F (21 °C).
(5) This is a food grade fill fluid.
(6) Not suitable for vacuum applications.
(7) For Submersible Seal TSM and FSM models, refer to the Rosemount 1199 Submersible Seal Product Data Sheet, document number 00813-0400-4016.
www.rosemount.com
71
Rosemount DP Level
March 2015
Continue specifying a completed model number by choosing a remote seal type below:
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flanged seal assemblies
page 75
Process connections
FFW Flush Flanged Seal
2-in. / DN 50 / 50A
3-in. / DN 80 / 80A
4-in. / DN 100 / 100A
★
1/2-in. / DN 15
3
page 78
RFW Flanged Seal
page 81
EFW Extended Flanged Seal
11/2-in. / DN 40 / 40A
2-in. / DN 50 / 50A
3-in. / Headbox
/ DN 80 / 80A
4-in. / Headbox
/ DN 100 / 100A
page 83
PFW Pancake Seal
2-in. / DN50
3-in. / DN 80
page 86
FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface
2-in.
3-in.
RCW Ring Type Joint (RTJ) Flanged Seal
½-in.
¾-in.
1-in.
1½-in.
page 88
page 91
FUW and FVW Flush Flanged Type Seals
Threaded seal assemblies
page 92
72
/4-in.
1-in. / DN 25 / 25A
11/2-in. / DN 40 / 40A
★
★
★
DN 50
DN 80
Process connections
RTW Threaded Seal
¼ –18 NPT
3
/8 –18 NPT
½ –14 NPT
¾ –14 NPT
1 – 11.5 NPT
1¼ –11.5 NPT
1½ –11.5 NPT
G1/2 A DIN 16288
R1/2 per ISO 7/1
★
www.rosemount.com
March 2015
Rosemount DP Level
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
page 95
HTS Male Threaded Seal
Hygienic seal assemblies
G1
G1½
G2
1-11.5 NPT
1 ½ -11.5 NPT
2-11.5 NPT
Process connections
page 96
SCW Hygienic Tri-Clover Style Tri Clamp Seal
1½-in.
2-in.
2 ½-in.
3-in.
4-in.
page 98
SSW Hygienic Tank Spud Seal
2-in. Extension
6-in. Extension
page 101
STW Hygienic Thin Wall Tank Spud Seal
0.8 in Extension
page 102
EES Hygienic Flanged Tank Spud Extended Seal
DN 50
DN 80
page 103
VCS Tri-Clamp™ In-Line Seal
1-in.
1½-in.
2-in.
3-in.
4-in.
page 104
SVS VARIVENT Compatible Hygienic Connection Seal
Tuchenhagen VARIVENT
Compatible
page 105
SHP Hygienic Cherry-Burrell “I” Line Seal
2-in.
3-in.
page 106
SLS Dairy Process Connection - Female Thread Seal per DIN
11851
DN 40
DN 50
Specialty seal assemblies
page 107
www.rosemount.com
★
★
Process connections
WSP Saddle Seal
2-in.
3-in.
4-in. or Larger
73
Rosemount DP Level
March 2015
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
74
page 109
UCP Male Threaded Pipe Mount Seals and PMW Paper Mill
Sleeve Seals
1½-in. with Threaded
Knurled Nut
1-in. with Cap Screw
Retainer
page 110
CTW Chemical Tee Seal
Retro-fit
page 111
TFS Wafer Style In-Line Seal
1-in. / DN 25
1½-in. / DN 40
2-in. / DN 50
3-in. / DN 80
4-in. / DN 100
page 112
WFW Flow-Thru Flanged Seal
1-in.
2-in.
3-in.
www.rosemount.com
March 2015
Rosemount DP Level
Flanged Seals
FFW Flush Flanged Seal
Table 19. FFW Flush Flanged Seal – Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry standards
A
D
T
J
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
EN 1092-1 (European Standard)
GOST 12815-80 (Russian Standard)
JIS B2238 (Japanese Industrial Standard)
★
★
★
Process connection style
FFW
★
Flush Flanged Seal
Process connection size
G
7
J
9
ANSI/ASME B16.5
EN 1092-1 / GOST 12815-80
JIS B2238
2-in.
3-in.
N/A
4-in.
DN 50
N/A
DN 80
DN 100
50 A
80 A
N/A
100 A
ANSI/ASME B16.5
EN 1092-1 / GOST 12815-80
JIS B2238
Class 150
Class 300
Class 600
N/A
N/A
Class 900
Class 1500
Class 2500
N/A
N/A
N/A
N/A
N/A
N/A
PN 40
PN 10/16 (DN 100 only)
N/A
N/A
N/A
PN 63
PN 100
PN 160
10K
20K
40K
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
★
★
★
★
Flange / pressure rating
1
2
4
G
E
5
6
7
H
J
K
★
★
★
★
Diaphragm and wetted, upper housing, flange material
Diaphragm and wetted
Upper housing
Flange
CA(1)(2)
316L SST
316L SST
CS
★
(2)
316L SST
316L SST
316 SST
★
(1)(3)
Alloy C-276, seam welded
316L SST
CS
★
(3)
Alloy C-276, seam welded
316L SST
316 SST
★
Tantalum, seam welded
316L SST
CS
★
Tantalum, seam welded
316L SST
316 SST
★
DA
CB
DB
(1)
CC
DC
(1)(2)(3)(4)
Tantalum, brazed
316L SST
CS
★
(1)(2)(3)(4)
Tantalum, brazed
316L SST
316 SST
★
(1)(2)
Alloy C-276, solid faceplate
Alloy C-276/316L SST
CS
C3
D3
MB
www.rosemount.com
75
Rosemount DP Level
March 2015
Table 19. FFW Flush Flanged Seal – Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Diaphragm and wetted, upper housing, flange material
Diaphragm and wetted
Upper housing
Flange
KB(1)(2)
Alloy C-276, solid faceplate
Alloy C-276/316L SST
316 SST
DJ
DF
DV
Alloy B, seam welded
304L SST, seam welded
Alloy 400, seam welded
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
RH(2)(5)
Titanium Grade 4
Titanium GR.4
316 SST
DH(6)
DE
DP
Titanium Grade 4, seam welded
316L SST
316 SST
Alloy 600, seam welded
Nickel 201, seam welded
316L SST
316L SST
316 SST
316 SST
WW(2)(7)
316Ti SST (WNr 1.4571)
316Ti SST (WNr 1.4571)
316Ti SST (WNr 1.4571)
DZ(6)
D4
D5
CP
CV
Zirconium 702, seam welded
316L SST
316 SST
Alloy C-22, seam welded
Duplex 2507 SST, seam welded
Nickel 201
Alloy 400
316L SST
316L SST
316L SST
316L SST
316 SST
316 SST
CS
CS
CH(6)
C5
Titanium Grade 4
316L SST
CS
Duplex 2507 SST
316L SST
CS
Flushing connection ring material (lower housing)(8)
0
A
B
2
H
6
V
None
316L SST
Alloy C-276
Duplex 2205 SST
Titanium Grade 4
Nickel 201
Alloy 400
★
★
★
Flushing connection options, quantity (size)
0
1
3
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
★
★
★
★
★
Options (Include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
★
★
Intermediate Gasket material
0
Y
J
N
K
76
No gasket for flushing connection ring (lower housing)
Thermo-tork TN-9000 (for use with flushing connection ring)
PTFE gasket (for use with flushing connection ring)
Grafoil gasket (for use with flushing connection ring)
Barium Sulfate filled PTFE gasket (for use with flushing connection ring)
★
★
★
www.rosemount.com
March 2015
Rosemount DP Level
Table 19. FFW Flush Flanged Seal – Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flushing plug, vent/drain valve
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
★
★
★
Diaphragm thickness
C
7
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
0.002-in. (50 μm) available with 316L SST and Alloy C-276
Mounting flange
4(9)
Flat face, flush flanged
Code conformance
T(10)
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
★
Gasket surface finish
1
Gasket Surface Ra 125 Max.
Code conformance
B
Extra Fill For Cold Temp Application
★
Diaphragm coating
Z(11)
0.0002-in. (5 μm) gold plated Diaphragm
V(11)
PTFE coated diaphragm for nonstick purposes only
Capillary change
2
Radial capillary connection
Alternate design
E
One Piece Design
Typical model number:
★
1199 W DC 1 0 A FFW 7 1 DA 0 0
(1) Only available with two piece design.
(2) For use with spiral wound metallic gaskets.
(3) Not available with option code C.
(4) Only available in Process Connection Size code G, 7, and J.
(5) Not available with welded capillary connections or direct mount.
(6) Operating temperature limited to 302 °F (150 °C).
(7) Only available with one-piece design, option code E.
(8) Supplied standard with Thermo-tork TN-9000 if no other gasket option is selected.
(9) The mounting flange and upper housing are a single item for the one-piece design. Only available with diaphragm and wetted part material codes DA, DB, DJ, DF,
DV, DH, DE, DP, WW, DZ, D4, DC, and D5.
(10) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
(11) Only available on 316LSS, Alloy 400 and Alloy C-276.
www.rosemount.com
77
Rosemount DP Level
March 2015
RFW Flanged Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 20. RFW Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry standard
A
D
T
J
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
EN 1092-1 (European Standard)
GOST 12815-80 (Russian Standard)
JIS B2238 (Japanese Industrial Standard)
★
★
★
Process connection style
RFW
★
Flanged Seal
Process connection size
2
4
D
F
1
A
B
C
ANSI/ASME B16.5
EN 1092-1 / GOST 12815-80
JIS B2238
1-in.
11/2-in.
N/A
N/A
1/2-in.
3
/4-in.
N/A
N/A
N/A
N/A
DN 25
DN 40
N/A
DN 10
DN 15
DN 20
25A
40A
N/A
N/A
N/A
10A
15A
20A
ANSI/ASME B16.5
EN 1092-1 / GOST 12815-80
JIS B2238
Class 150
Class 300
Class 600
N/A
Class 900
Class 1500
Class 2500
N/A
N/A
N/A
N/A
N/A
N/A
N/A
PN 40
N/A
N/A
N/A
PN 6
PN 63
PN 100
PN 160
10K
20K
40K
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
★
★
★
★
Flange/pressure rating
1
2
4
G
5
6
7
C
H
J
K
★
★
★
★
Diaphragm, upper housing, flange material
CA
DA
CB
DB
78
Diaphragm
Upper housing
Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
★
★
★
★
www.rosemount.com
March 2015
Rosemount DP Level
Table 20. RFW Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
CC
DC
DF
DJ
DE
DV
DP
DK
Tantalum
Tantalum
304L SST
Alloy B
Alloy 600
Alloy 400
Nickel 201
Alloy 20
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
RH(1)
DH
D4
D5
DZ
CV
CP
Titanium Grade 4
Titanium Grade 4
316 SST
Titanium Grade 4
Alloy C-22
Duplex 2507 SST
Zirconium 702
Alloy 400
Nickel 201
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
316 SST
CS
CS
★
★
Flushing connection ring material (lower housing)(2)
A
B
D
2
F
H
V
C
316L SST
Alloy C-276
Plated CS
Duplex 2205
304L SST
Titanium Grade 4
Alloy 400
Tantalum lined 316L SST (no flushing connection allowed)
★
★
★
Flushing connection options, quantity size
5
1
3
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
★
★
★
Options (Include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Intermediate Gasket material
Y
J
N
K
R
C-4401 gasket (for use with flushing connection ring)
PTFE gasket (for use with flushing connection ring)
Grafoil gasket (for use with flushing connection ring)
Barium Sulfate filled PTFE gasket (for use with flushing connection ring)
Ethylene Propylene gasket (for use with flushing connection ring)
★
★
Flushing plug, vent/drain valve
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
www.rosemount.com
★
★
★
79
Rosemount DP Level
March 2015
Table 20. RFW Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Diaphragm thickness
C
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Bolt material
3
T
(3)
304 SST Bolts (only available for Stud Bolt Design)
★
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
Gasket surface finish
1
Gasket Surface Ra 125 Max.
Cold temperature application
B
★
Extra Fill For Cold Temp Application
Diaphragm coating
Z(4)
0.0002-in. (5 μm) gold plated Diaphragm
V(4)
PTFE coated diaphragm for nonstick purposes only
Large diaphragm size
9
4.1-in. (104 mm) Diaphragm Diameter
Typical model number:
1199 W DC 1 0 A RFW 2 1 DA A 5
(1) Not available with welded capillary connections or direct mount.
(2) Supplied with C4401 Aramid fiber gasket if no other gasket option is selected.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
(4) Only available on 316LSS, Alloy 400 and Alloy C-276.
80
www.rosemount.com
March 2015
Rosemount DP Level
EFW Extended Flanged Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 21. EFW Extended Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
● = Available
— = Unavailable
Code
Industry standard
A
D
T
J
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
EN 1092-1 (European Standard)
GOST 12815-80 (Russian Standard)
JIS B2238 (Japanese Industrial Standards)
★
★
★
Process connection style
EFW
★
Extended Flanged Seal
Process connection size
7
9
4
G
H
K
ANSI/ASME B16.5
EN 1092-1 / GOST
12815-80
JIS B2238
Extension
diameters
3-in.
4-in.
11/2-in.
2-in.
3-in. (Headbox)
4-in. (Headbox)
DN 80
DN 100
DN 40
DN 50
DN 80 (Headbox)
DN 100 (Headbox)
80A
100A
40A
50A
—
—
2.58-in. (66 mm)
3.50-in. (89 mm)
1.45-in. (37 mm)
1.90-in. (48 mm)
2.875-in. (73 mm)
3.780-in. (96 mm)
ANSI/ASME B16.5
EN 1092-1 / GOST
12815-80
JIS B2238
Class 150
Class 300
Class 600
N/A
N/A
Class 900
Class 1500
Class 2500
—
—
—
—
—
—
PN 40
PN 10/16 (DN 100 only)
—
—
—
PN 63
PN 100
PN 160
10K
20K
40K
—
—
—
—
—
—
—
—
★
★
Flange/pressure rating
1
2
4
G
E
5
6
7
H
J
K
Diaphragm, extension and gasket surface, upper housing, flange
material
★
★
★
★
Available with process
connection code
Code
Diaphragm
Extension/
gasket surface
Upper
housing
Mounting
flange
7
9
4
G H
K
DA
CA
DB
CB
316L SST
316L SST
Alloy C-276
Alloy C-276
316L SST
316L SST
Alloy C-276
Alloy C-276
316L SST
316L SST
316L SST
316L SST
316 SST
CS
316 SST
CS
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
www.rosemount.com
●
●
●
●
★
★
★
★
81
Rosemount DP Level
March 2015
Table 21. EFW Extended Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
DM
DD
Alloy C-276
Tantalum
316L SST
316L SST
316L SST
316L SST
316 SST
316 SST
●
●
●
●
●
—
● ●
— —
●
—
DC(1)
D5
D9
Tantalum
Tantalum Lined
316L SST
316 SST
●
●
—
● —
—
Duplex 2507 SST
Duplex 2507 SST
Duplex 2205 SST
316L SST
316L SST
316L SST
316 SST
316 SST
●
●
●
●
●
●
● ●
● ●
●
●
Extension length
2
4
6
8
1
3
5
7
9
ANSI/ASME B16.5
EN 1092-1 / JIS B2238 / GOST 12815-80
2-in.
4-in.
6-in.
8-in.
1-in.
3-in.
5-in.
7-in.
9-in.
50 mm
100 mm
150 mm
200 mm
25 mm
75 mm
125 mm
175 mm
225 mm
★
★
★
Fractional extension length
0
ANSI/ASME B16.5
EN 1092-1 / JIS B2238 / GOST 12815-80
0-in.
0 mm
★
Options (include with selected model number)
Extended product warranty
WR3
WR5
★
★
3-year limited warranty
5-year limited warranty
Diaphragm thickness
C
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Code conformance
T(2)
★
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
Gasket surface finish
1
Gasket Surface Ra 125 Max.
Cold temperature application
B
★
Extra Fill For Cold Temperature Application
Diaphragm coating
Z(3)
0.0002-in. (5 μm) Gold plated diaphragm
V(3)
PTFE coated diaphragm for nonstick purposes only
Typical model number:
1199 W DC 1 0 A EFW 7 1 DA 2 0
(1) Requires Gasket Surface Finish Code 1 Gasket Surface Finish Ra 125 Max. Available in extension lengths 2, 4 & 6 in. For all other lengths consult factory.
(2) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
(3) Only available on 316LSS, Alloy 400 and Alloy C-276.
82
www.rosemount.com
March 2015
Rosemount DP Level
PFW Pancake Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 123 for more information on Material Selection.
Table 22. PFW Pancake Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry standard
A
D
T
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
EN 1092-1 (European Standard)
GOST 12815-80 (Russian Standard)
★
★
★
Process connection style
PFW
★
Pancake Seal
Process connection size
G
7
J
ANSI
EN 1092-1 / GOST 12815-80
2-in.
3-in.
N/A
DN 50
N/A
DN 80
★
★
★
Flange/pressure rating
ANSI
1
2
4
No flange supplied, seal MWP based on
customer supplied flange
Class 150
Class 300
Class 600
9
N/A
G
5
6
7
H
J
N/A
Class 900
Class 1500
Class 2500
N/A
N/A
0
EN 1092-1 / GOST 12815-80
N/A
★
N/A
N/A
N/A
No flange supplied, seal MWP based on customer supplied
flange
PN40
N/A
N/A
N/A
PN 63
PN 100
★
★
★
★
★
Diaphragm and wetted, upper housing, flange material
Diaphragm and wetted
Upper housing
Flange
(1)
LA
316L SST
316L SST
None
★
CA(1)
316L SST
316L SST
CS
★
DA(1)
LB
CB
DB
LC
CC
DC
316L SST
316L SST
316 SST
★
Alloy C-276, Seam Welded
Alloy C-276, Seam Welded
Alloy C-276, Seam Welded
Tantalum, Seam Welded
Tantalum, Seam Welded
Tantalum, Seam Welded
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
None
CS
316 SST
None
CS
316 SST
★
★
★
★
★
★
www.rosemount.com
83
Rosemount DP Level
March 2015
Table 22. PFW Pancake Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flushing connection ring material (lower housing)(2)
0
A
B
★
★
★
None
316L SST
Alloy C-276
Flushing connection options, quantity (size)
0
1
2
7
9
★
★
★
★
★
None
1 (1/2-14 NPT)
2 (1/2-14 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
Options (Include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Intermediate Gasket material
0
Y
J
N
K
★
★
★
No gasket for flushing connection ring (lower housing)
Thermo-tork TN-9000 (for use with flushing connection ring)
PTFE gasket (for use with flushing connection ring)
Grafoil gasket (for use with flushing connection ring)
Barium Sulfate filled PTFE gasket (for use with flushing connection ring)
Flushing plug, vent/drain valve
D
G
H
★
★
★
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Diaphragm thickness
C
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Code conformance
T(3)
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
★
Gasket surface finish
1
Gasket Surface Ra 125 Max.
Cold temperature application
B
Extra Fill For Cold Temp Application
★
Diaphragm coating
Z(4)
0.0002-in. (5 μm) Gold plated diaphragm
V(4)
PTFE coated diaphragm for nonstick purposes only
Typical model number:
1199 W DC 1 0 A PFW 7 1 DA 0 0
(1) For use with customer supplied spiral wound metallic gaskets.
(2) Supplied with Thermo-tork TN-9000 gasket if no other gasket option is selected.
84
www.rosemount.com
March 2015
Rosemount DP Level
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
(4) Only available on 316LSST, Alloy 400, and Alloy C-276.
www.rosemount.com
85
Rosemount DP Level
March 2015
FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 23. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standards
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
Process connection style
FCW
Flush Flanged Seal - Ring Type Joint Gasket Surface
Process connection size
G
7
2-in.
3-in.
Flange/pressure rating
1
2
4
5
6
7
Class 150
Class 300
Class 600
Class 900
Class 1500
Class 2500
Diaphragm and wetted, upper housing, flange material
DA
KB
K5
MB
CA
Diaphragm and wetted
Upper housing
Flange
316L SST
Alloy C-276
Duplex 2507 SST/Duplex 2205
Alloy C-276
316 L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
CS
CS
Flushing connection ring material (lower housing)
0
A
B
2
None
316L SST
Alloy C-276
Duplex 2205 SST
Flushing connection options
0
1
3
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
Options (Include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Flushing plug, vent/drain valve
D
G
H
86
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
www.rosemount.com
March 2015
Rosemount DP Level
Table 23. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Diaphragm thickness
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
0.002-in. (50 μm) available with 316L SST and Alloy C-276
C
7
Code conformance
T(1)
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
Cold temp application
B
Extra Fill For Cold Temp Application
Diaphragm coating
Z(2)
V
(2)
0.0002-in. (5 μm) Gold plated diaphragm
PTFE coated diaphragm for nonstick purposes only
Alternate design
E
One Piece Design
Typical model number: 1199 W DC 1 0 A FCW 7 1 DA 0 0
(1) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
(2) Only available on 316LSST and Alloy C-276.
www.rosemount.com
87
Rosemount DP Level
March 2015
RCW Ring Type Joint (RTJ) Flanged Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 24. RCW Ring Type Joint Flanged Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
Process connection style
RCW
Flanged Seal - Ring Type Joint Gasket Surface
Process connection size
1
A
2
4
1/2-in. (bolts and studs included for ANSI Class 300 to 1500, not available for ANSI Class 150)
3
/4-in. (not available for Class 150)
1-in.
11/2-in.
Flange/pressure rating
1
2
4
5
6
7
Class 150
Class 300
Class 600
Class 900
Class 1500
Class 2500
Diaphragm, upper housing, flange material
Diaphragm
Upper housing
Flange
CA
DA
CB
DB
CC
DC
DE
DF
DJ
DV
DP
RH
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
Alloy 600
304L SST
Alloy B316L SST
Alloy 400
Nickel 201
Titanium Grade 4
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
Titanium Grade 4
CS
316 SST
CS
316 SST
CS
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
DH(1)
D4
D5
Titanium Grade 4
316L SST
316 SST
Alloy 22
Duplex 2507 SST
316L SST
316L SST
316 SST
316 SST
DZ(1)
DK
Zirconium 702
316L SST
316 SST
Alloy 20
316L SST
316 SST
88
www.rosemount.com
March 2015
Rosemount DP Level
Table 24. RCW Ring Type Joint Flanged Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Flushing connection ring material (lower housing)(2)
A
B
F
H
2
V
316L SST
Alloy C-276
304L SST
Titanium Grade 4
Duplex 2205 SST
Alloy 400
Flushing connection options
5
1
3
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Intermediate gasket material
Y
J
N
K
R
C-4401 gasket (for use with flushing connection ring)
PTFE gasket (for use with flushing connection ring)
Grafoil gasket (for use with flushing connection ring)
Barium Sulfate filled PTFE gasket (for use with flushing connection ring)
Ethylene Propylene gasket (for use with flushing connection ring)
★
Flushing plug, vent/drain valve
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Diaphragm thickness
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
C
Bolt material (optional)
3
304 SST Bolts (only available for Stud Bolt Design)
Code conformance
T(3)
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
Cold temperature application
B
Extra Fill For Cold Temp Application
Diaphragm coating
Z(4)
V
(3)
0.0002-in. (5 μm) Gold plated diaphragm
PTFE coated diaphragm for nonstick purposes only
Large diaphragm size
9
4.1-in. (104 mm) Diaphragm Diameter
Typical model number:
1199 W DC 1 0 A RCW 2 1 DA A 5
(1) Operating temperature is limited to 302 °F (150 °C).
www.rosemount.com
89
Rosemount DP Level
March 2015
(2) Supplied with C-4401 Aramid Fiber Gasket if no other gasket option is selected.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
(4) Only available on 316LSS, Alloy 400, and Alloy C-276.
90
www.rosemount.com
March 2015
Rosemount DP Level
FUW and FVW Flush Flanged Type Seals
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 25. FUW and FVW Flush Flanged Type Seals – EN Ordering Information
This seal is part of the Expanded offering is subject to additional delivery lead time.
Code
Industry standard
D
T
EN 1092-1 (European Standard)
GOST 12815-80 (Russian Standard)
Process connection style
FUW
FVW
Flush Flanged, EN 1092-1 Type D (Groove)
Flush Flanged, EN 1092-1 Type C (Tongue)
Process connection size
G
J
DN 50
DN 80
Flange/pressure rating
G
PN 40
Diaphragm and wetted, upper housing, flange material
Diaphragm and wetted
Upper housing
Flange
DA(1)
316L SST
316L SST
316 SST
KB(2)
Alloy C-276
316L SST
316 SST
Tantalum
316L SST
316 SST
(1)
DC
Flushing connection ring material (lower housing)
0
None
Flushing connection options, quantity (size)
0
None
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Cold temperature application
B
Extra Fill For Cold Temperature Application
Alternate design
E
One Piece Design
Typical model number:
1199 W DC 1 0 A FUW J G DA 0 0
(1) Only available with one piece design, option code E.
(2) Only available with two-piece design.
www.rosemount.com
91
Rosemount DP Level
March 2015
Threaded Seals
RTW Threaded Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 26. RTW Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry standard
A
D
ANSI/ASME B1.20.1 (American National Standards Institute/American Society of Mechanical Engineers
EN 10226-1 (European Standard)
★
★
Process connection style
RTW
★
Threaded (standard thread is female, for male select Option code 9)
Process connection size
ANSI/ASME B1.20.1
EN 10226-1
3
4
5
1/2-14 NPT
3
/4-14 NPT
1-11.5 NPT
N/A
N/A
N/A
★
★
★
7(1)
1
C
2
11/2-11.5 NPT
N/A
★
1/4-18 NPT
N/A
3/8-18 NPT
N/A
Parallel thread: G1/2A DIN 16288
N/A
6(1)
N
11/4-11.5 NPT
N/A
N/A
Tapered thread: R1/2 per ISO 7/1
Pressure rating
ANSI/ASME B1.20.1
EN 10226-1
0
2500 psi
172 bar
2(2)
5000 psi
344 bar
3(2)(3)
8
10000 psi
N/A
1500 psi (4.1-in. (104 mm) diaphragm
103 bar (4.1-in. (104 mm) diaphragm
★
Diaphragm, upper housing, flange material
CA
DA
CB
DB
CC
DC
DJ
DF
DP
DV
92
Diaphragm
Upper housing
Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
Alloy B
304L SST
Nickel 201
Alloy 400
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
CS
316 SST
316 SST
316 SST
316 SST
316 SST
★
★
★
★
★
★
www.rosemount.com
March 2015
Rosemount DP Level
Table 26. RTW Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
RH(4)
Titanium Grade 4
Titanium Grade 4
316 SST
DH(5)
Titanium Grade 4
316L SST
316 SST
D4
D5
DE
Alloy 22
Duplex 2507 SST
Alloy 600
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
DZ(5)
DK
Zirconium 702
316L SST
316 SST
Alloy 20
316L SST
316 SST
RZ(4)
Zirconium 702
Zirconium 702
316 SST
Flushing connection ring material (lower housing)(6)(7)
A
B
D
2
H
V
F
316L SST
Alloy C-276
Plated Carbon Steel
Duplex 2205 SST
Titanium Grade 4
Alloy 400
304L SST
★
★
Flushing connection options
5
1
3
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
★
★
★
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Intermediate Gasket material
Y
J
N
R
K
C-4401 gasket (for use with flushing connection ring)
PTFE gasket (for use with flushing connection ring)
Grafoil gasket (for use with flushing connection ring)
Ethylene Propylene gasket (for use with flushing connection ring)
Barium Sulfate filled PTFE gasket (for use with flushing connection ring)
★
★
★
★
Flushing plug, vent/drain valve
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
★
★
★
Diaphragm thickness
C
0.006-in. (150 μm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Bolt material
3
4
304 SST Bolts
316 SST Bolts
★
Code conformance
T(8)
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
www.rosemount.com
★
93
Rosemount DP Level
March 2015
Table 26. RTW Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Cold temperature application
B
★
Extra Fill For Cold Temp Application
Diaphragm coating
Z(9)
0.0002-in. (5 μm) Gold plated diaphragm
V(9)
PTFE coated diaphragm for nonstick purposes only
Special threads in lower housing
9
Male Threads
Typical model number:
1199 W DC 1 0 A RTW 3 0 DA A 5
(1) Flushing connection not available.
(2) Consult an Emerson Process Management representative for pricing and availability on Pressure Rating codes 2 or 3.
(3) The following process connection sizes are D rated: 3/4-in. (9000 psi/621 bar), 1-in. (8700 psi/600 bar), 11/4-in. (7000 psi/483 bar), and
11/2-in. (6000 psi/414 bar).
(4) Not available with welded capillary connections or direct mount.
(5) Operating temperature is limited to 302 °F (150 °C).
(6) Supplied with C-4401 aramid fiber gasket if no other gasket option is selected.
(7) Flushing Connection Ring/Lower Housing assembly bolts provided as standard are carbon steel for ANSI and 304 SST for EN.
(8) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
(9) Only available on 316LSS, Alloy 400, and Alloy C-276.
94
www.rosemount.com
March 2015
Rosemount DP Level
HTS Male Threaded Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 128 for more information on Material Selection.
Table 27. HTS Male Threaded Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
A
D
ANSI/ASME B1.20.1 (American National Standards Institute/American Society of Mechanical Engineers)
EN 10226-1 (European Standard)
Process connection style
HTS
Male Threaded Seal
Process connection size, pressure rating
ANSI/ASME B1.20.1
EN 10226-1
5A(1)
1-11,5 NPT, 8700 psi (600 bar)
N/A
7A(2)
1½-11,5 NPT, 6000 psi (414 bar)
N/A
9A (3)
2-11,5 NPT, 4000 psi (276 bar)
N/A
EA(1)
N/A
G1, 455 bar (6600 psi)
GA(2)
N/A
G11/2, BSP, 400 bar (5801 psi)
JA(3)
N/A
G2, BSP, 280 bar (4060 psi)
Diaphragm and wetted, upper housing material
LA00
Diaphragm and wetted
Upper housing
316L SST
316L SST
Typical model number:
1199 W DC 1 0 A HTS 7 A LA 0 0
Options (Include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
(1) Consult factory for calibrated spans lower than 300 psi (21 bar).
(2) Consult factory for calibrated spans lower than 100 psi (7 bar).
(3) Consult factory for calibrated spans lower than 50 psi (3,4 bar).
www.rosemount.com
95
Rosemount DP Level
March 2015
Hygienic Seals
SCW Hygienic Tri-Clover Style Tri Clamp Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the
equipment. See page 124 for more information on Material Selection.
Table 28. SCW Hygienic Tri-Clover Style Tri Clamp Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Industry standard
S
★
Hygienic Seal (conforms to 3-A Standard 74-03)
Process connection style
SCW(1)
★
Tri-Clover Style Tri-Clamp Seal
Process connection size
30(2)
(3)
50
70
60
90
1½-in.
★
2-in.
★
3-in.
2½-in.
4-in.
★
Diaphragm and wetted, upper housing material
LA00
LB00
Diaphragm and wetted
Upper housing
316L SST
Alloy C-276
316L SST
316L SST
★
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Surface finish
D
G
H
10 μin. (0.25 μm) Ra surface finish
15 μin. (0.375 μm) Ra surface finish
20 μin. (0.50 μm) Ra surface finish
Non-hygienic fill fluid
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Clamp and gasket material
2(4)
3
High-Pressure Ladish Clamp & Nitrile butadiene (NBR) gasket
Nitrile butadiene (NBR) gasket
Polishing
6
Electro polishing
Typical model number:
1199 W NC 1 0 S SCW 7 0 LA 0 0
(1) Clamp and gasket furnished by user. The maximum working pressure is dependent upon the clamp pressure rating.
(2) Consult factory for calibrated spans lower than 1000 inH2O (2490 mbar).1/2
(3) Consult factory for calibrated spans lower than 150inH2O (373 mbar).
(4) See Table 29 (next page).
96
www.rosemount.com
March 2015
Rosemount DP Level
Table 29. High Pressure Ladish™ Clamp Maximum Working Pressure
Process connection size
1
1 /2-in.
2-in.
2 1/2-in.
3-in.
4-in.
www.rosemount.com
70 °F (21 °C)
250 °F (121 °C)
1,500 psi (103 bar)
1,000 psi (69 bar)
1,000 psi (69 bar)
1,000 psi (69 bar)
1,000 psi (69 bar)
1,200 psi (83 bar)
800 psi (55 bar)
800 psi (55 bar)
800 psi (55 bar)
800 psi (55 bar)
97
Rosemount DP Level
March 2015
SSW Hygienic Tank Spud Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 30. SSW Hygienic Tank Spud Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry standard
S
Hygienic Seal (conforms to 3-A Standard 74-03)
★
Process connection style
★
SSW(1) Tank Spud Seal
Process connection size, pressure rating
A0
★
600 psi (41 bar)
Upper housing
A
★
316L SST
Diaphragm and wetted, extension material
Diaphragm and wetted
Extension
AL
316L SST(2)
316L SST(2)
★
BB
Alloy C-276
316L SST
★
Extension length
2
6
★
★
2-in.
6-in.
Options (Include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Surface finish
G(3)
H
15 μin. (0.375 μm) diaphragm surface finish
20 μin.(0.5 μm) diaphragm surface finish
Diaphragm thickness
C
0.006-in. (150 μm)
Tank spud
1
★
Tank Spud Included with Shipment
Non-hygienic fill fluid
P
3
4
Non-Hygienic fill fluid (Does not conform to 3-A Standard 74)
Nitrile butadiene (NBR) O-ring instead of Standard Ethylene Propylene O-ring
(Conforms to 3-A Standard 74)
Fluorocarbon (FMK)® O-ring, instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74)
Polishing
6
Electro polishing
Typical model number:
98
1199 W NC 1 0 S SSW A 0 AA L 2
www.rosemount.com
March 2015
Rosemount DP Level
(1) Ethylene Propylene O-Ring (conforms to 3-A standard 74 and USP class VI) and Clamp are supplied with the SSW Seal.
(2) Diaphragm brazed and TIG-welded to extension.
(3) Requires Option code 6, Electro polishing.
www.rosemount.com
99
Rosemount DP Level
March 2015
Figure 1. Sanitary Tank Spud Accessories
Tank spud and clamp
Rosemount 3051S with direct mount sanitary tank spud with clamp
Tank spud
Tank spud plug
0.19 (5)
20°
R
20° ± 1°
37-01
74
5.22
(133)
3.70
(94)
5.98
(152)
5.22
(133)
0.09
(2)
0.50
(13)
A
3.93
(100)
3.63
(92)
A
1.10
(28)
Dimensions are in inches (millimeters).
Table 31. Sanitary Tank Spud Optional Accessories
Model
Description
01199-0061-0001
2 in. Sanitary Tank Spud(1)
01199-0061-0002
6 in. Sanitary Tank Spud(1)
(1) Welding procedures and material certifications are shipped with the tank spud. Standard material is cast equivalent of 316L SST per ASTM- A351 grade CF3M.
Table 32. Sanitary Tank Spud Spare Parts
Part number
Description
01199-0526-0002
C53185-0070-0341
Clamp
Ethylene Propylene O-ring
100
www.rosemount.com
March 2015
Rosemount DP Level
STW Hygienic Thin Wall Tank Spud Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 33. STW Hygienic Thin Wall Tank Spud Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
S
Hygienic Seal (conforms to 3-A Standard 74-03)
Process connection style
STW(1)
Thin Wall Tank Spud Seal
Process connection size, pressure rating
B0
4-in. Tri-Clamp, 600 psi (41 bar)
Diaphragm and wetted, extension material
LA00
BB00
Diaphragm and wetted
Extension
316L SST
Alloy C-276
316L SST
Alloy C-276
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Surface finish
G(2)
H
15 μin. (0.375 μm) diaphragm surface finish
20 μin.(0.5 μm) diaphragm surface finish
Non-hygienic fill fluid
P
Non-Hygienic fill fluid (Does not conform to 3-A Standard 74)
Polishing
6
Electro polishing
Typical model number:
1199 W NC 1 0 S STW B 0 LA 0 0
(1) For tank walls up to 3/16-in. thick. Ethylene Propylene O-ring (conforms to 3-A standard 74 and USP class VI) and Clamp are supplied with the STW Seal.
(2) Requires Option code 6, Electro polishing.
www.rosemount.com
101
Rosemount DP Level
March 2015
EES Hygienic Flanged Tank Spud Extended Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 34. EES Hygienic Flanged Tank Spud Extended Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
S
Hygienic Seal (conforms to 3-A Standard 74-03)
Process connection style
EES
Flanged Tank Spud Seal
Process connection size, pressure rating
GG
JG
DN 50, PN 40
DN 80, PN 40
Diaphragm and wetted, extension material
LA
LB
Diaphragm and wetted
Extension
316L SST
Alloy C-276
316L SST
316L SST
Extension length(1)
10
25 mm (1-in.)
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Surface finish
G(2)
H
15 μ-in. (0.375 μm) Ra surface finish
20 μ-in. (0.50 μm) Ra surface finish
Gasket material
1
Fluorocarbon (FMK) O-ring, instead of Standard Ethylene Propylene O-ring (conforms to 3-A Standard 74).
Non-hygienic fill fluids
P
Non-Hygienic fill fluid (Does not conform to 3-A Standard 74)
Cold temperature application
B
Extra Fill For Cold Temperature Application
Polishing
6
Electro polishing
Typical model number:
1199 W NC 1 0 S EES J G LA 1 0
(1) Other extension lengths are available upon request.
(2) Requires Option code 6, Electro polishing.
102
www.rosemount.com
March 2015
Rosemount DP Level
VCS Tri-Clamp™ In-Line Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 35. VCS Tri-Clamp In-Line Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
S
Hygienic Seal (conforms to 3-A Standard 74-03)
Process connection style
VCS(1)
In-Line Tri-Clover Style Tri-Clamp Seal
Process connection size
20(2)
1-in.
30(3)
11/2-in.
50
2-in.
70
3-in.
90
4-in.
Diaphragm and wetted, upper housing material
LA00
Diaphragm and wetted
Upper housing
316L SST
316L SST
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
WR5
5-year limited warranty
Surface finish
G(4)
15 μ-in. (0.375 μm) Ra surface finish
H
20 μ-in. (0.50 μm) Ra surface finish
Non-hygienic fill fluid
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Polishing
6
Electro polishing
Typical model number:
1199 W NC 1 0 S VCS 7 0 LA 0 0
(1) Gasket and clamp are furnished by the user. The maximum working pressure is dependent upon the clamp pressure rating.
(2) Consult factory for calibrated spans lower than 15 psi (1034 mbar).
(3) Consult factory for calibrated spans lower than 5 psi (345 mbar).
(4) Requires Option code 6, Electro polishing.
www.rosemount.com
103
Rosemount DP Level
March 2015
SVS VARIVENT Compatible Hygienic Connection Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 36. SVS VARIVENT Compatible Hygienic Connection Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
S
Hygienic Seal (conforms to 3-A Standard 74-03)
Process connection style
SVS
Tuchenhagen VARIVENT Compatible Seal
Process connection size
V0(1)
VARIVENT Type N DN 40-125.
Diaphragm and wetted, upper housing material
LA00
Diaphragm and wetted
Upper housing
316L SST
316L SST
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Non-hygienic fill fluid
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Cold temperature application
B
Extra Fill For Cold Temperature Application
Polishing
6
Electro polishing
Typical model number:
1199 W NC 1 0 S SVS V 0 LA 0 0
(1) Consult factory for calibrated spans lower than 5,4 psi (373 mbar).
104
www.rosemount.com
March 2015
Rosemount DP Level
SHP Hygienic Cherry-Burrell “I” Line Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 37. SHP Hygienic Cherry-Burrell “I” Line Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
S
Hygienic Seal (conforms to 3-A Standard 74-03)
Process connection style
SHP(1)
Cherry-Burrell “I” Line Style Seal
Process connection size
50(2)
70
2-in.
3-in.
Diaphragm and wetted, upper housing material
AA00
Diaphragm and wetted
Upper housing
316L SST
316L SST
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Non-hygienic fill fluid
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Typical model number:
1199 W NC 1 0 S SHP 7 0 AA 0 0
(1) Clamp and gasket furnished by user. Maximum working pressure is the lesser of either clamp pressure rating or 500 psi.
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
www.rosemount.com
105
Rosemount DP Level
March 2015
SLS Dairy Process Connection - Female Thread Seal per DIN 11851
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 38. SLS Hygienic Dairy Process Connection Female Thread Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
S
Hygienic Seal (conforms to 3-A Standard 74-03)
Process connection style
SLS
Dairy Process Connection - Female Thread
Process connection size, pressure rating, material
F0(1)
DIN 11851 with coupling nut DN 40, PN 40, 304 SST
G0(2)
DIN 11851 with coupling nut DN 50, PN 25, 304 SST
Diaphragm and wetted, upper housing material
LA00
Diaphragm and wetted
Upper housing
316L SST
316L SST
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Polishing
6
Electro polishing.
Non-hygienic fill fluids
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Typical model number:
1199 W HC 1 0 S SLS J 0 LA 0 0
(1) Consult factory for calibrated spans lower than 15 psi (1034 mbar).
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
106
www.rosemount.com
March 2015
Rosemount DP Level
Specialty Seals
WSP Saddle Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 39. WSP Saddle Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
N
Non-Industry Standard
Process connection style
WSP
Saddle Seal
Process connection size
G
7
9
2-in. Pipe size
3-in. Pipe size
4-in. or larger Pipe size
Pressure rating
1
0
1500 psig at 100 °F (103 bar at 38 °C); eight bolt holes
1250 psig at 100 °F (86 bar at 38 °C); six bolt holes
Diaphragm, upper housing material
LA
LB
LC
L5
Diaphragm
Upper housing
316L SST
Alloy C-276
Tantalum
Duplex 2507 SST
316L SST
316L SST
316L SST
316 SST
Lower housing material(1)(2)
00
L5
B5
D5
None
316L SST
Alloy C-276
Plated Carbon Steel
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Intermediate gasket material
Y
J
N
C-4401 gasket
PTFE gasket
Grafoil gasket
Code conformance
T(3)
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
www.rosemount.com
107
Rosemount DP Level
March 2015
Table 39. WSP Saddle Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Diaphragm coating
V
PTFE Coated Diaphragm for nonstick purposes (316L SST and Alloy C-276 diaphragms only)
Typical model number:
1199 W DC 1 0 N WSP 7 1 LA L N
(1) Standard pipe schedule 40/40S, for other pipe schedules consult the factory.
(2) Supplied with C4401 Aramid fiber gasket if no gasket option is selected.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
108
www.rosemount.com
March 2015
Rosemount DP Level
UCP Male Threaded Pipe Mount Seals and PMW Paper Mill Sleeve
Seals
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 40. UCP and PMW Threaded Pipe Mount Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Industry standard
N
Non-Industry Standard
Process connection style
UCP
PMW
Male Threaded Pipe Mount Seal
Paper Mill Sleeve
Process connection size, pressure rating
30(1)
11/2-in., Threaded Knurled Nut, 600 psi at 100 °F (41 bar at 38 °C) (UCP only)
50(2)
1-in., Cap Screw Retainer, 300 psi at 100 °F (21 bar at 38 °C) (PMW only)
Diaphragm and wetted, upper housing material
AA
BB
Diaphragm and wetted
Upper housing
316L SST
Alloy C-276
316L SST
Alloy C-276
Lower housing material
00
A0
B0
None
316L SST
Alloy C-276
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Diaphragm coating
V
PTFE coated diaphragm for nonstick purposes only
Typical model number:
1199 W DC 1 0 N UCP 3 0 AA A 0
(1) Only available with UCP process connection size. Consult factory for calibrated spans lower than 50 psi (3,4 bar).
(2) Only available with PMW process connection size. Consult factory for calibrated spans lower than 100 psi (6,9 bar).
www.rosemount.com
109
Rosemount DP Level
March 2015
CTW Chemical Tee Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 41. CTW Chemical Tee Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
N
Non-Industry Standard
Process connection style
CTW
Chemical Tee Seal
Maximum working pressure (flange rating)
20
300 psi (21 bar)
Diaphragm and wetted, upper housing material
AA
BB
Diaphragm and wetted
Upper housing
316L SST
Alloy C-276
316L SST
Alloy C-276
Lower housing
00
None
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Code conformance
T(1)
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
Diaphragm coating
V
PTFE coated diaphragm for nonstick purposes only
Typical model number:
1199 W NC 1 0 N CTW 2 0 AA 0 0
(1) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
110
www.rosemount.com
March 2015
Rosemount DP Level
TFS Wafer Style In-Line Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 42. TFS Wafer Style In-Line Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
A
D
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
EN 1092-1 (European Standard)
Process connection style
TFS
Wafer Style In-Line Seal
Process connection size
ANSI/ASME B16.5
EN 1092-1
G
7
J
9
2-in.
3-in.
N/A
4-in.
DN 50
N/A
DN 80
N/A
2(1)
4
1-in.
N/A
(2)
1½-in.
N/A
(1)
N/A
DN 25
N/A
DN 40
N/A
DN 100
D
F(2)
K
Pressure rating
0
Seal MWP based on customer supplied flange
Diaphragm and wetted, upper housing material
LA
LB
Diaphragm and wetted
Upper housing
316L SST
Alloy C-276
316L SST
316L SST
Housing body length
00
3.54-in. (90 mm)
Typical model number:
1199 W DC 1 0 A TFS 7 0 LA 0 0
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
(1) Consult factory for calibrated spans lower than 15 psi (1034 mbar).
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
www.rosemount.com
111
Rosemount DP Level
March 2015
WFW Flow-Thru Flanged Seal
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 124 for more information on Material Selection.
Table 43. WFW Flow-Thru Flanged Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry standard
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
Process connection style
WFW(1)
Flow-Thru Flanged Seal
Process connection size(2)
G
7
2
2-in.
3-in.
1-in.
Flange rating(2)
1
Class 150(2)
Diaphragm, upper housing material
LA
LB
LC
Diaphragm
Upper housing(2)
316L SST
Alloy C-276
Tantalum
316L SST
316L SST
316L SST
Lower housing material(1)
L
316L SST
Pipe schedule(2)
N
40/40S
Options (include with selected model number)
Extended product warranty
WR3
WR5
3-year limited warranty
5-year limited warranty
Gasket material
Y
J
K
N
R
C-4401 gasket
PTFE O-ring
Barium Sulfate filled PTFE gasket
Grafoil gasket
Ethylene Propylene gasket
Bolt material
3
304 SST bolts
Code conformance
T(3)
112
Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103
www.rosemount.com
March 2015
Rosemount DP Level
Table 43. WFW Flow-Thru Flanged Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Cold temperature application
B
Extra Fill For Cold Temperature Application
Typical model number:
1199 W DC 1 0 A WFW 7 1 LA L N
(1) Supplied with C4401 Aramid fiber gasket if no other gasket option is selected.
(2) Consult factory for special process connection sizes, flange pressure ratings, diaphragm/lower housing materials, and pipe schedules.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
www.rosemount.com
113
Rosemount DP Level
March 2015
Specifications
Liquid level transmitter specifications
Performance specifications
For zero-based spans, reference conditions, silicone oil fill, glass-filled PTFE O-rings, SST materials, Coplanar flange (3051SMV,
3051S_C) or 1/2-in.- 14 NPT (3051S_T) process connections, digital trim values set to equal range points.
Conformance to specification (±3σ [Sigma])
Technology leadership, advanced manufacturing techniques, and statistical process control ensure measurement specification
conformance to ±3σ or better.
Reference accuracy(1)
Stated reference accuracy equations include terminal based linearity, hysteresis, and repeatability, but does not include analog
output reference accuracy of ±0.005% of span.
For FOUNDATION™ fieldbus and wireless devices, use calibrated range in place of span.
Ultra
Classic
3051SAM(2)
±0.025% of Span
For spans less than 10:1,
±(0.005% URL + 0.015% span)
±0.035% of Span.
For spans less than 10:1,
±(0.005% URL + 0.015% span)
3051SAL_C
±0.055% of Span.
For spans less than 10:1,
±(0.005% URL + 0.015% span)
±0.065% of Span.
For spans less than 10:1,
±(0.005% URL + 0.015% span)
3051L
±0.075% of Span. For spans less than 10:1, ±(0.005% URL + 0.025% span)
2051L
±0.075% of Span. For spans less than 10:1, ±(0.005% URL + 0.025% span)
(1) Stated reference accuracy equations include terminal based linearity, hysteresis, and repeatability, but does not include analog only reference accuracy of
±0.005% of span.
(2) For the Rosemount 3051SAM with 1199 assemble to code B11, use 3051SAL_C specifications.
DP Reference Accuracy of 3051S ERS System
Two coplanar gage sensors (3051SAM_ _G)
Ultra
Classic
Ranges 2-4
±0.035% of DP span
±0.049% of DP span
Range 5
±0.071% of DP span
±0.092% of DP span
±0.035% of DP span
±0.049% of DP span
±0.035% of DP span
±0.049% of DP span
±0.055% of DP span
±0.092% of DP span
Two coplanar (3051SAM_ _A)
Ranges 1-4
Two in-line gage sensors (3051SAM_ _T)
Two in-line absolute sensors (3051SAM_ _E)
Ranges 1-4
Two liquid level sensors (3051SAL)
Ranges 1-5
114
www.rosemount.com
March 2015
Rosemount DP Level
Warranty(1)
Models(1)
3051SAM and 3051SAL
Ultra
Classic
15-year limited warranty(2)
1-year limited warranty(3)
(1) Warranty details can be found in Emerson Process Management Terms and Conditions of Sale, Document 63445, Rev G (10/06).
(2) Rosemount Ultra transmitter has a limited warranty of fifteen (15) years from date of shipment. All other provisions of Emerson Process Management standard
limited warranty remains the same.
(3) Goods are warranted for twelve (12) months from the date of initial installation or eighteen (18) months from the date of shipment by seller, whichever period
expires first.
Dynamic performance
Rosemount Level Transmitters
3051SAL_C, 3051L, and 2051L models - have an 4 - 20 mA HART (1 - 5 Vdc HART Low Power) update rate of 22 updates per second.
Electronic Remote Sensor Systems
3051SAM, 3051SAL_P, and 3051SAL_S models - have an 4 - 20 mA HART (1 - 5 Vdc HART Low Power) update rate of 11 updates per
second. See page 94 for WirelessHART update rates.
For total response time, see Instrument Toolkit™.
Ambient temperature effect
See Instrument Toolkit.
Mounting position effects
With liquid level remote mount seal in vertical plane, zero shift of up to ±1 inH2O (2,49 mbar); with remote mount seal in horizontal
plane, zero shift of up to ±5 inH2O (12,45 mbar) plus extension length on extended units; all zero shifts can be zeroed; no span effect.
Vibration effect
Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field or pipeline with high vibration
level (10-60 Hz 0.21mm displacement peak amplitude / 60-2000 Hz 3g).
3051SAM
3051SAL
For Housing Style codes 1J, 1K, 1L, 2J, and 2M:
Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field with general application or
pipeline with low vibration level (10-60 Hz 0.15mm displacement peak amplitude / 60-500 Hz 2g).
3051L
Measurement effect due to vibrations is negligible except at resonance frequencies. When at resonance
frequencies, vibration effect is less than ±0.1% of URL per g when tested between 15 and 2000 Hz in any axis
relative to pipe-mounted process conditions.
2051L
Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field or pipeline with high vibration
level (10-60 Hz 0.21mm displacement peak amplitude / 60-2000 Hz 3g).
Power supply effect
Less than ±0.005% of calibrated span per volt.
Electromagnetic Compatibility (EMC)
Meets all relevant requirements of EN 61326 and NAMUR NE-21.(1)
(1)
NAMUR NE-21 does not apply to wireless output code X or ERS configurations.
www.rosemount.com
115
Rosemount DP Level
March 2015
Transient protection (Option T1)
3051SAM
3051SAL
Meets IEEE C62.41.2-2002, Location Category B
6 kV crest (0.5 μs - 100 kHz)
3 kA crest (8 × 20 microseconds)
6 kV crest (1.2 × 50 microseconds)
3051L
Meets IEEE C62.41, Category B
6 kV crest (0.5 μs - 100 kHz)
3 kV crest (8 × 20 microseconds)
6 kV crest (1.2 × 50 microseconds)
2051L
Meets IEEE C62.41, Category Location B
6 kV crest (0.5 μs - 100 kHz)
3 kV crest (8 × 20 microseconds)
6 kV crest (1.2 × 50 microseconds)
Functional Specifications
Range and Sensor Limits
Range
Table 1. 3051SAM_ _G, 3051SAL_ _D, 3051SAL_ _G Range and Sensor Limits
2
3
4
5
Minimum span
Range limits
Ultra
Classic
Upper (URL)
1.3 inH2O
(3,11 mbar)
5.0 inH2O
(12,4 mbar)
1.5 psi
(103,4 mbar)
10.0 psi
(689,5 mbar)
2.5 inH2O
(6,23 mbar)
10.0 inH2O
(24,9 mbar)
3.0 psi
(206,8 mbar)
20.0 psi
(1,38 bar)
250.0 inH2O
(0,62 bar)
1000.0 inH2O
(2,49 bar)
300.0 psi
(20,7 bar)
2000.0 psi
(137,9 bar)
Lower (LRL)
3051SAL_G
(1)(2)
-250.0 inH2O
(-0,62 bar)
-393.0 inH2O
(-979 mbar)
-14.2 psig
(-979 mbar)
-14.2 psig
(-979 mbar)
3051SAL_D(1)
-250.0 inH2O
(-0,62 bar)
-1000.0 inH2O
(-2,49 bar)
-300.0 psi
(-20,7 bar)
- 2000.0 psi
(-137,9 bar)
(1) When specifying a 3051SAL Ultra, use Classic minimum span.
(2) Assumes atmospheric pressure of 14.7 psig (1 bar).
Table 2. 3051SAM_ _A, 3051SAL_ _A Range and Sensor Limits(1)
Range and sensor limits
Range
Minimum span
Ultra
Classic
Upper (URL)
Lower (LRL)
1
0.3 psia (20,7 mbar)
0.3 psia (20,7 mbar)
30 psia (2,07 bar)
0 psia (0 bar)
2
0.75 psia (51,7 mbar)
1.5 psia (0,103 bar)
150 psia (10,34 bar)
0 psia (0 bar)
3
4 psia (275,8 mbar)
8 psia (0,55 bar)
800 psia (55,16 bar)
0 psia (0 bar)
4
20 psia (1,38 bar)
40 psia (2,76 bar)
4000 psia (275,8 bar)
0 psia (0 bar)
(1) When specifying a 3051SAL Ultra, use Classic minimum span.
116
www.rosemount.com
March 2015
Rosemount DP Level
Table 3. 3051SAM_ _T, 3051SAM_ _E, 3051SAL_ _T, 3051SAL_ _E Range and Sensor Limits
Range and sensor limits
Range
Minimum span
Ultra
Classic
Upper (URL)
Lower (LRL) (Abs.)
Lower(1) (LRL) (Gage)
1
0.3 psi (20,7 mbar)
0.3 psi (20,7 mbar)
30 psi (2,07 bar)
0 psia (0 bar)
-14.7 psig (-1,01 bar)
2
0.75 psi (51,7 mbar)
1.5 psi (0,103 bar)
150 psi (10,34 bar)
0 psia (0 bar)
-14.7 psig (-1,01 bar)
3
4 psi (275,8 mbar)
8 psi (0,55 bar)
800 psi (55,16 bar)
0 psia (0 bar)
-14.7 psig (-1,01 bar)
4
20 psi (1,38 bar)
40 psi (2,76 bar)
4000 psi (175,8 bar)
0 psia (0 bar)
-14.7 psig (-1,01 bar)
5
1000 psi (68,9 bar)
2000 psi (137,9 bar)
10000 psi (689,5 bar)
0 psia (0 bar)
-14.7 psig (-1,01 bar)
(1) Assumes atmospheric pressure of 14.7 psig (1 bar).
Table 4. 3051L Range and Sensor Limits
Range
Range and sensor limits
Minimum span
Lower (LRL)
Upper (URL)
3051L Differential
3051L Gage(1)
2
2.5 inH2O (6,2 mbar)
250 inH2O (0,62 bar)
–250 inH2O (–0,62 bar)
–250 inH2O (–0,62 bar)
3
10 inH2O (24,9 mbar)
1000 inH2O (2,49 bar)
–1000 inH2O (–2,49 bar)
-393 inH2O (-979 mbar)
4
3 psi (0,20 bar)
300 psi (20,6 bar)
–300 psi (–20,6 bar)
-14.2 psig (979 mbar)
5
20 psi (1,38 bar)
2000 psi (137,9 bar)
N/A
N/A
(1) Assumes atmospheric pressure of 14.7 psig.
Table 5. 2051L Range and Sensor Limits
Range
Range and sensor limits
Minimum span
Lower (LRL)
Upper (URL)
2051L Differential
2051L Gage(1)
2
2.5 inH2O (6,2 mbar)
250 inH2O (0,62 bar)
–250 inH2O (–0,62 bar)
–250 inH2O (–0,62 bar)
3
10 inH2O (24,9 mbar)
1000 inH2O (2,49 bar)
–1000 inH2O (–2,49 bar)
–393 inH2O (–979 mbar)
4
3 psi (0,207 bar)
300 psi (20,6 bar)
–300 psi (–20,7 bar)
–14.2 psig (–979 mbar)
(1) Assumes atmospheric pressure of 14.7 psig.
www.rosemount.com
117
Rosemount DP Level
March 2015
Service
FOUNDATION fieldbus (output code F)
Liquid, gas, and vapor applications
Power supply
Protocols
External power supply required; transmitters operate on 9.0
to 32.0 Vdc transmitter terminal voltage.
4–20 mA (output code A)
Current draw
Output
17.5 mA for all configurations (including LCD display option)
Two-wire 4–20 mA, user-selectable for linear or square root
output. Digital process variable superimposed on 4–20 mA
signal, available to any host that conforms to the HART
protocol.
Indication
Optional two-line LCD Display
Foundation fieldbus Function Block Execution Times
Execution time (milliseconds)
Power supply
External power supply required. Standard transmitter (4–20
mA) operates on 10.5 to 42.4 Vdc with no load. The 3051S
ERS System operates on 16 - 42.4 Vdc with no load.
Block
3051SAL_C
3051L
2051L
Resource
N/A
N/A
N/A
Load limitations
Transducer
N/A
N/A
N/A
Maximum loop resistance is determined by the voltage level
of the external power supplied as described by:
LCD Block
N/A
N/A
N/A
Analog Input 1, 2
20
30
35
35(1)
45
45
Figure 1. Standard HART Transmitter
PID
Maximum Loop Resistance = 43.5 * (Power Supply Voltage – 10.5)
Input Selector
20
30
30
Arithmetic
20
35
35
Signal Characterizer
20
40
40
Integrator
20
35
35
Output Splitter
20
N/A
N/A
Control Selector
20
N/A
N/A
Load (Ohms)
1387
1000
500
Operating
Region
0
10.5
20
30
Voltage (Vdc)
42.4
(1) PID with Auto-tune.
The Field Communicator requires a minimum loop resistance of 250Ω
for communication.
Figure 2. 3051S ERS System
If supply voltage ≤ 16.74 Vdc:
Maximum Loop Resistance = 277 * (Power Supply Voltage – 16.0)
If supply voltage > 16.74 Vdc:
Maximum Loop Resistance = 43.5 * (Power Supply Voltage – 12.0)
Schedule Entries
7 (max.)
Links
20 (max.)
Virtual Communications Relationships (VCR)
12 (max.)
Standard function blocks
Resource block
Contains hardware, electronics, and diagnostic information.
1322
Load (Ohms)
Foundation fieldbus Parameters
Transducer block
Operating
Region
206
0
Contains actual sensor measurement data including the
sensor diagnostics and the ability to trim the pressure sensor
or recall factory defaults.
16 16.74
42.4
Voltage (Vdc)
LCD block
Configures the local display.
The Field Communicator requires a minimum loop resistance of 250Ω
for communication.
118
www.rosemount.com
March 2015
2 analog input blocks
Processes the measurements for input into other function
blocks. The output value is in engineering units or custom
and contains a status indicating measurement quality.
PID block
Contains all logic to perform PID control in the field
including cascade and feedforward.
Rosemount DP Level
Power supply
External power supply required; transmitters operate on 9.0
to 32.0 Vdc transmitter terminal voltage.
Current draw
17.5 mA for all configurations (including LCD display option)
Output update rate
Four times per second.
Standard function blocks
Backup Link Active Scheduler (LAS)
Analog input (AI block)
The transmitter can function as a Link Active Scheduler if the
current link master device fails or is removed from the segment.
The AI function block processes the measurements and
makes them available to the host device. The output value
from the AI block is in engineering units and contains a
status indicating the quality of the measurement.
Advanced control function block suite (option code A01)
Input selector block
Selects between inputs and generates an output using
specific selection strategies such as minimum, maximum,
midpoint, average, or first “good.”
Arithmetic block
Provides pre-defined application-based equations including
flow with partial density compensation, electronic remote
seals, hydrostatic tank gauging, ratio control, and others.
Signal characterizer block
Characterizes or approximates any function that defines an
input/output relationship by configuring up to twenty X, Y
coordinates. The block interpolates an output value for a
given input value using the curve defined by the configured
coordinates.
Integrator block
Compares the integrated or accumulated value from one or
two variables to pre-trip and trip limits and generates
discrete output signals when the limits are reached. This
block is useful for calculating total flow, total mass, or
volume over time.
FOUNDATION fieldbus diagnostics suite (option code D01)
The FOUNDATION fieldbus Diagnostics provide Abnormal
Situation Prevention (ASP) indication. The integral statistical
process monitoring (SPM) technology calculates the mean and
standard deviation of the process variable 22 times per second.
The 3051S_L and 3051L use these values and highly flexible
configuration options for customization to detect many
user-defined or application specific abnormal situations (e.g.
detecting plugged impulse lines and fluid composition change).
Profibus PA (output code W)
Profile version
Physical block
The physical block defines the physical resources of the
device including type of memory, hardware, electronics, and
diagnostic information.
Transducer block
Contains actual sensor measurement data including the
sensor diagnostics and the ability to trim the pressure sensor
or recall factory defaults.
Indication
Optional two line LCD display
Local operator interface
Optional external configuration buttons
3051SAL_C Wireless self-organizing networks
Output
IEC 62591 (WirelessHART), 2.4 GHz DSSS
Radio frequency power output from antenna
External Antenna (WK option):
Maximum of 10 mW (10 dBm) EIRP
Extended Range, External Antenna (WM option):
Maximum of 18 mW (12.5 dBm) EIRP
High-Gain, Remote Antenna (WN option):
Maximum of 40 mW (16 dBm) EIRP
Local display
The optional seven-digit LCD display can display primary
variable in engineering units, percent of range, sensor
module temperature, and electronics temperature. Display
updates at update rate up to once per minute. The display
updates based on the wireless update rate.
3.02
www.rosemount.com
119
Rosemount DP Level
March 2015
Table 6. 3051L, 2051L and Level Flange Rating Limits
Update rate
User selectable 1 sec. to 60 min.
Power module
Field replaceable, keyed connection eliminates the risk of
incorrect installation, Intrinsically Safe Lithium-thionyl
chloride Power Module with polybutadine terephthalate
(PBT) enclosure. Ten-year life at one minute update rate.(1)
ANSI/ASME
Class 150
285 psig
275 psig
ANSI/ASME
Class 300
740 psig
720 psig
ANSI/ASME
Class 600
1480 psig
1440 psig
DIN
PN 10–40
40 bar
40 bar
DIN
PN 10/16
16 bar
16 bar
DIN
PN 25/40
40 bar
40 bar
-40 to 185 °F (-40 to 85 °C)
With LCD display(1): -40 to 175 °F (-40 to 80 °C)
With option code P0: -20 to 185 °F (-29 to 85 °C)
Table 6. 3051L, 2051L and Level Flange Rating Limits
SST Rating
SST Rating
Ambient
Limit is 0 psia to the flange rating or sensor rating, whichever is
lower.
CS Rating
CS Rating
Temperature limits
Overpressure limits
Type
Type
At 122 °F (50 °C), the rating decreases with increasing
temperature per EN 1092-1 Annex F.
(1) Reference conditions are 70 °F (21 °C), and routing data for three
additional network devices.
Note: Continuous exposure to ambient temperature limits of -40 °F or
185 °F (-40 °C or 85 °C) may reduce specified life by less than 20 percent.
Standard
Standard
(1) LCD display may not be readable and LCD display updates will be
slower at temperatures below -4 °F (-20 °C).
Storage
-50 to 185 °F (-46 to 85 °C)
With LCD display: -40 to 185 °F (-40 to 85 °C)
With Wireless Output: -40 to 185 °F (-40 to 85 °C)
At 100 °F (38 °C), the rating decreases with increasing
temperature, per ANSI/ASME B16.5.
Table 7. 3051SAM ERS Process Temperature Limits (Gage/Absolute Sensor)
Coplanar gage / absolute sensor
(3051SAM_ _G, 3051SAM_ _A)
In-line gage sensor / absolute sensor
(3051SAM_ _T, 3051SAM_ _E)
N/A
-40 to 250 °F (-40 to 121 °C)(3)
with Coplanar Flange(1)
-40 to 250 °F (-40 to 121 °C)(3)
N/A
with Traditional Flange(2)
-40 to 300 °F (-40 to 149 °C)(3)
N/A
with Level Flange(2)
-40 to 300 °F (-40 to 149 °C)(3)
N/A
(3)
N/A
Configuration
Silicone Fill Fluid(1)
(1)
with 305 Integral Manifold
Inert Fill Fluid
(1)(4)
-40 to 300 °F (-40 to 149 °C)
(5)
-40 to 185 °F (-40 to 85 °C)
-22 to 250 °F (-30 to 121 °C)(3)
(1) Process temperatures above 185 °F (85 °C) require de-rating the ambient limits by a 1.5:1 ratio. For example, for process temperature of 195 °F (91 °C), new
ambient temperature limit is equal to 170 °F (77 °C). This can be determined as follows: (195 °F - 185 °F) ⫻ 1.5 = 15 °F, 185 °F - 15 °F = 170 °F.
(2) Process temperatures above 185 °F (85 °C) require de-rating the ambient limits by a 1:1 ratio.
(3) 220 °F (104 °C) limit in vacuum service; 130 °F (54 °C) for pressures below 0.5 psia.
(4) Not available with 3051SAM_ _A.
(5) 160 °F (71 °C) limit in vacuum service.
120
www.rosemount.com
March 2015
Rosemount DP Level
Table 8. Fill Fluid Specifications(1)
Seal fill fluid
Temperature limits(1)
Specific Coeff. Of
Viscosity at
4-in.
gravity therm.
Thermal
77 °F (25 °C) No extension 2-in. (50mm) (100mm)
at 77 °F
exp.
optimizer
(centistokes)
extension
extension
(25 °C) (cc/cc/°C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
Capillary
-49 to 401 °F
(-45 to 205 °C)
D
Silicone 200
0.93
0.00108
9.5
F
Silicone 200
for Vacuum
Applications
0.93
N/A
N/A
L
Silicone 704
1.07
0.00095
44
C
Silicone 704
for Vacuum
Applications
1.07
N/A
N/A
R
Silicone 705
1.09
0.00077
175
V
Silicone 705
for Vacuum
Applications
1.09
N/A
N/A
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor pressure
curves in Rosemount DP Level Fill Fluid Specification technical note
(00840-2100-4016).
Y(3)
UltraThermTM
805
1.20
N/A
N/A
Up to 770 °F
(410 °C)
Z(3)
UltraTherm
805 for
Vacuum
1.20
N/A
N/A
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor pressure
curves in Rosemount DP Level Fill Fluid Specification technical note
(00840-2100-4016).
32 to 401 °F
(0 to 205 °C)(2)
32 to 464 °F
(0 to 240 °C)(2)
32 to 500 °F
(0 to 260
°C)(2)
32 to 599 °F
(0 to 315 °C)
32 to 599 °F
(0 to 315 °C)
For use in vacuum applications below 14.7 psia (1 bar-a), refer to vapor pressure
curves in Rosemount DP Level Fill Fluid Specification technical note
(00840-2100-4016).
68 to 401 °F(2)
(20 to 205 °C)
68 to 464 °F(2)
(20 to 240 °C)
Up to 770 °F
(410 °C)
68 to 500 °F(2)
(20 to 260 °C)
Up to 770 °F
(410 °C)
68 to 698 °F(2)
(20 to 370 °C)
Up to 770 °F
(410 °C)
68 to 698 °F
(20 to 370 °C)
Up to 770 °F
(410 °C)
For use in vacuum application below 14.7 psia (1 bar-a), refer to vapor pressure
curves in Rosemount DP Level Fill Fluid Specification Technical Note
(00840-2100-4016).
A
SYLTHERM
XLT
0.85
0.001199
1.6
-102 to 293 °F
(-75 to 145 °C)
-102 to 293 °F
(-75 to 145 °C)
102 to 293 °F
(-75 to 145 °C)
102 to 293 °F
(-75 to 145 °C)
102 to 293 °F
(-75 to 145 °C)
H
Inert
(Halocarbon)
1.85
0.000864
6.5
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
G(4)(5)
Glycerin and
Water
1.13
0.00034
12.5
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
N(5)
Neobee M–20
0.92
0.001008
9.8
5 to 401 °F(2)
(-15 to 205 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
P(4)(5)
Proylene
Glycol and
Water
1.02
0.00034
2.8
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
(1) Temperature limits are reduced in vacuum service. For more information on Fill Fluids please see technical note Rosemount 1199 Fill Fluid Specifications
00840-2100-4016.
(2) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient temperatures exceed 70 °F (21 °C).
(3) Only available with Thermal Range Expander.
(4) Not suitable for vacuum applications.
(5) This is a food grade fill fluid.
www.rosemount.com
121
Rosemount DP Level
March 2015
Figure 3. Thermal Range Expander Temperature Operating Range
100
80
Silicone 704
60
0
410°C
20
370°C
UltraTherm
805
315°C
Ambient Temperature (°C)
Silicone 705
40
-20
-40
-60
-75
-30
10
50
90
130
170
210
250
Process Temperature (°C)
290
Figure 4. Thermal Optimizer with Silicone 704 Fill Fluid
Temperature Limits
330
370
410
Figure 5. Thermal Optimizer with Silicone 705 Fill Fluid
Temperature Limits
Humidity limits
0–100% relative humidity
122
www.rosemount.com
March 2015
Rosemount DP Level
Turn-on time
3051SAL_C
Performance within specifications less than 2.0 seconds after power is applied to the transmitter.
3051L
Performance within specifications less than 2.0 seconds (10.0 s for Profibus protocol) after power is applied to the
transmitter
2051L
Performance within specifications less than 2.0 seconds after power is applied to the transmitter.
ERS System:
Performance within specifications less than 6.0 seconds after power is applied.
Volumetric displacement
Less than 0.005 in.3 (0.08 cm3)
Damping(1)
Software damping is in addition to sensor module response time.
3051SAL_C
Analog output response to a step change is user-selectable from 0 to 60 seconds for one time constant.
3051L
Analog output response to a step input change is user-selectable from 0 to 36 seconds for one time constant.
2051L
Analog output response to a step input change is user-selectable from 0 to 25.6 seconds for one time constant.
ERS System:
The PHI and PLO Pressure measurements and the DP calculation may be independently dampened from 0 – 60
seconds for one time constant.
(1) Does not apply to wireless option code X.
www.rosemount.com
123
Rosemount DP Level
March 2015
Physical specifications
Material selection
Emerson provides a variety of Rosemount products with various product options and configurations including materials of
construction that can be expected to perform well in a wide range of applications. The Rosemount product information presented is
intended as a guide for the purchaser to make an appropriate selection for the application. It is the purchaser’s sole responsibility to
make a careful analysis of all process parameters (such as all chemical components, temperature, pressure, flow rate, abrasives,
contaminants, etc.), when specifying product materials, options, and components for the particular application. Emerson Process
Management is not in a position to evaluate or guarantee the compatibility of the process fluid or other process parameters with the
product options, configuration, or materials of construction selected.
Electrical connections
1/2–14 NPT, PG 13.5, G1/2, and M20 × 1.5 conduit. HART interface connections fixed to terminal block.
Non-wetted parts
Transmitter flange is CF-3M (Cast version of 316L SST, material per ASTM-A743).
Capillary Tube is 316L SST.
Capillary Armor is SST or PVC Coated SST.
Electrical
Housing
Coplanar
Sensor Module
Housing
3051SAL
3051L
2051L
Low-copper aluminum alloy or
CF-8M (Cast 316 SST)
NEMA 4X, IP 66, IP 68 (66 ft (20 m)
for 168 hours)
Note: IP 68 not available with
Wireless Output.
Low-copper aluminum or CF-3M
(Cast version of 316L SST, material
per ASTM-A743). NEMA 4X, IP 65,
IP 66
Low-copper aluminum or CF-8M
(Cast version of 316 SST). Enclosure
Type 4X, IP 65, IP 66, IP 68
CF-3M (Cast version of 316L
SST, material per ASTM-A743)
CF-3M (Cast version of 316L SST,
material per ASTM-A743)
CF-3M (Cast version of 316L
SST, material per ASTM-A743)
Plated carbon steel per ASTM A449,
ASTM A449, Type 1 (zinc-cobalt
Type 1
plated carbon steel)
Austenitic 316 SST per ASTM F593
ASTM F593G, Condition CW1
ASTM A453, Class D, Grade 660 SST
(Austenitic 316 SST)
Bolts
ASTM A193, Grade B7M alloy steel
ASTM A193, Grade B7M (zinc
ASTM A193, Class 2, Grade B8M SST
plated alloy steel)
Alloy K-500
Alloy K-500
Silicone or inert halocarbon (Inert is
Silicone 200 or Fluorocarbon oil
Sensor Module
not available with 3051S_CA).
(Halocarbon or Fluorinert FC-43
Fill Fluid
In-Line series uses Fluorinert™ FC-43.
for 3051T)
SYLTHERM XLT, Silicone 705, Silicone
SYLTHERM XLT, Silicone 705,
Process Fill
704, Silicone 200, inert, glycerin and Silicone 704, Silicone 200, inert,
water, Neobee M-20, propylene
glycerin and water, Neobee M-20,
Fluid
glycol and water.
propylene glycol and water
Paint for
Aluminum
Housing
Cover O-ring
Silicone 200 or Fluorocarbon oil
(Halocarbon or Fluorinert FC-43 for
2051T)
SYLTHERM XLT, Silicone 705,
Silicone 704, Silicone 200, inert,
glycerin and water, Neobee M-20,
propylene glycol and water
Polyurethane
Polyurethane
Polyurethane
Nitrile butadiene (NBR)
Nitrile butadiene (NBR)
Nitrile butadiene (NBR)
N/A
N/A
N/A
N/A
External Antenna (WK1 / WM1):
PBT/ PC integrated omni-directional
Wireless
antenna
Antenna
Remote Antenna (WN1): Fiberglass
omni-directional antenna
Field replaceable, keyed connection
eliminates the risk of incorrect
installation, Intrinsically Safe
Power Module
Lithium-thionyl chloride Power
Module with PBT enclosure
124
ASTM A449, Type 1 (zinc-cobalt
plated carbon steel)
ASTM F593G, Condition CW1
(Austenitic 316 SST)
ASTM A193, Grade B7M (zinc plated
alloy steel)
www.rosemount.com
March 2015
Rosemount DP Level
Note
If a lower housing is supplied, then the following gaskets are the default gaskets for each seal unless another gasket
material is selected.
Level transmitter default gasket options
Seal
Gaskets
FF
ThermoTork TN-9000 gasket
FC
No gasket is supplied
RC
Klinger C-4401 gasket
RF
Klinger C-4401 gasket
RT
Klinger C-4401 gasket
PF
ThermoTork TN-9000 gasket
SSW
Ethylene Propylene O-ring
Shipping weights
Table 9. 3051SAL Weights Without SuperModule Platform, Housing, or Transmitter Options
Flange
Flush
lb. (kg)
2-in. Ext.
lb (kg)
4-in. Ext.
lb (kg)
6-in. Ext.
lb (kg)
2-in., 150
9.5 (4,3)
N/A
N/A
N/A
3-in., 150
15.7 (7,1)
16.4 (7,4)
17.6 (8,0)
18.9 (8,6)
4-in., 150
21.2 (9,6)
20.9 (9,5)
22.1 (10,0)
23.4 (10,6)
2-in., 300
11.3 (5,1)
N/A
N/A
N/A
3-in., 300
19.6 (8,9)
20.3 (9,2)
21.5 (9,8)
22.8 (10,3)
4-in., 300
30.4 (13.8)
30.3 (13,7)
31.5 (14,3)
32.8 (14,9)
2-in., 600
12.8 (5,8)
N/A
N/A
N/A
3-in., 600
22.1 (10,0)
22.8 (10,3)
24.0 (10,9)
25.3 (11,5)
DN 50 / PN 40
11.3 (5,1)
N/A
N/A
N/A
DN 80 / PN 40
16.0 (7,3)
16.7 (7,6)
17.9 (8,1)
19.2 (8,7)
DN 100 / PN 10/16
11.2 (5,1)
11.9 (5,4)
13.1 (5,9)
14.4 (6,5)
DN 100 / PN 40
12.6 (5,7)
13.3 (6,0)
14.5 (6,6)
15.8 (7,1)
www.rosemount.com
125
Rosemount DP Level
March 2015
Table 10. 3051SAM and 3051SAL Transmitter Option Weights
Option code
Option
Add lb (kg)
1J, 1K, 1L
SST PlantWeb Housing
3.5 (1,6)
2J
SST Junction Box Housing
3.4 (1,5)
7J
SST Quick Connect
0.4 (0,2)
2A, 2B, 2C
Aluminum Junction Box Housing
1.1 (0,5)
1A, 1B, 1C
Aluminum PlantWeb Housing
1.1 (0,5)
(1)
M5
LCD Display for Aluminum PlantWeb Housing ,
LCD Display for SST PlantWeb Housing(1)
0.8 (0,4)
1.6 (0,7)
Aluminum Standard Cover
0.4 (0,2)
SST Standard Cover
1.3 (0,6)
Aluminum Display Cover
0.7 (0,3)
SST Display Cover
1.5 (0,7)
Wireless Extended Cover
0.7 (0,3)
LCD Display(2)
0.1 (0,04)
Junction Box Terminal Block
0.2 (0,1)
PlantWeb Terminal Block
0.2 (0,1)
Power Module
0.5 (0,2)
Thermal Range Expander
4.1 (1.9)
(1) Includes LCD display and display cover.
(2) Display only.
Table 11. 3051L Weights without Options
Flange
Flush
lb. (kg)
2-in. ext.
lb. (kg)
4-in. ext.
lb. (kg)
6-in. ext.
lb. (kg)
2-in., 150
12.5 (5,7)
N/A
N/A
N/A
3-in., 150
17.5 (7,9)
19.5 (8,8)
20.5 (9,3)
21.5 (9,7)
4-in., 150
23.5 (10,7)
26.5 (12,0)
28.5 (12,9)
30.5 (13,8)
2-in., 300
17.5 (7,9)
N/A
N/A
N/A
3-in., 300
22.5 (10,2)
24.5 (11,1)
25.5 (11,6)
26.5 (12,0)
4-in., 300
32.5 (14,7)
35.5 (16,1)
37.5 (17,0)
39.5 (17,9)
2-in., 600
15.3 (6,9)
N/A
N/A
N/A
3-in., 600
25.2 (11,4)
27.2 (12,3)
28.2 (12,8)
29.2 (13,2)
DN 50/PN 40
13.8 (6,2)
N/A
N/A
N/A
DN 80/PN 40
19.5 (8,8)
21.5 (9,7)
22.5 (10,2)
23.5 (10,6)
DN 100/ PN 10/16
17.8 (8,1)
19.8 (9,0)
20.8 (9,5)
21.8 (9,9)
DN 100/ PN 40
23.2 (10,5)
25.2 (11,5)
26.2 (11,9)
27.2 (12,3)
126
www.rosemount.com
March 2015
Rosemount DP Level
Table 12. 3051L Transmitter Options Weights
Code
Option
Add
lb. (kg)
J, K, L, M
Stainless Steel Housing (T)
3.9 (1,8)
J, K, L, M
Stainless Steel Housing (C, L, H, P)
3.1 (1,4)
M5
LCD display for Aluminum Housing
0.5 (0,2)
M6
LCD display for SST Housing
1.25 (0,6)
Table 13. 2051L Weights without Options
Flange
Flush
lb. (kg)
2-in. ext.
lb. (kg)
4-in. ext.
lb. (kg)
6-in. ext.
lb. (kg)
2-in., 150
12.5 (5,7)
N/A
N/A
N/A
3-in., 150
17.5 (7,9)
19.5 (8,8)
20.5 (9,3)
21.5 (9,7)
4-in., 150
23.5 (10,7)
26.5 (12,0)
28.5 (12,9)
30.5 (13,8)
2-in., 300
17.5 (7,9)
N/A
N/A
N/A
3-in., 300
22.5 (10,2)
24.5 (11,1)
25.5 (11,6)
26.5 (12,0)
4-in., 300
32.5 (14,7)
35.5 (16,1)
37.5 (17,0)
39.5 (17,9)
DN 50/PN 40
13.8 (6,2)
N/A
N/A
N/A
DN 80/PN 40
19.5 (8,8)
21.5 (9,7)
22.5 (10,2)
23.5 (10,6)
DN 100/ PN 10/16
17.8 (8,1)
19.8 (9,0)
20.8 (9,5)
21.8 (9,9)
DN 100/ PN 40
23.2 (10,5)
25.2 (11,5)
26.2 (11,9)
27.2 (12,3)
Table 14. 2051L Transmitter Options Weights
Code
Option
Add
lb. (kg)
J, K, L, M
Stainless Steel Housing
3.9 (1,8)
M5
LCD display for Aluminum Housing
0.5 (0,2)
www.rosemount.com
127
Rosemount DP Level
March 2015
Rosemount 1199 Seal Specification
Functional specifications
Material Traceability (Q8 Option)
Hygienic seal approvals
Material traceability is provided for the seal, upper housing, and
if applicable, lower housing/flushing connection or diaphragm
extension, upon selecting the option code Q8 in the pressure
transmitter model number. Material traceability for the
transmitter/seal system is provided per the DIN EN10204 3.1
standard, and is only available for general purpose seal types.
Hygienic Seals: Tri-Clamp, tank spud, thin wall tank spud,
Tri-Clamp inline, and Cherry Burrell “I” line seal conform to 3-A
Hygienic Standards for Sensor and Sensor Fittings and
Connections used on Milk and Milk Product Equipment, Number
74-03.
Hygienic Fill Fluids: The hygienic fill fluids glycerin & water and
Propylene Glycol & water meet United States Pharmacopeia
(USP) and Food Chemical Codex (FCC) requirements and is
Generally Recognized as Safe (GRAS) in accordance with the FDA
Code of Federal Regulations Title 21. The hygienic fill fluid
Neobee M-20 is approved under 21CFR 172.856 as a direct food
additive and under 21 CFR 174.5 as an indirect food additive.
Hygienic O-rings: The EPDM, Fluorocarbon (FMK), and Nitrile
butadiene (NBR) O-rings for the SSW Tank Spud Seal meet 3-A
Hygienic Standard Number 18 Class 1 requirements. The EPDM
O-ring also meets USP class VI approval requirements.
Surface finish certification (Q16 option)
When ordering the Q16 option in the pressure transmitter
model number, the surface finish of the seal diaphragm is
certified per BPE 2002 requirements. This surface finish
certification is available for Tri-Clamp, Tri-Clamp Inline, Tank
Spud, and Thin Wall Tank Spud seal types.
NACE standard (T option)
NACE (National Association of Corrosion Engineers) standard
MR0175/ISO 15156 defines metallic material requirements for
resistance to sulfide stress cracking when applied on petroleum
production, drilling, gathering and flow line equipment, and
field processing facilities to be used in H2S bearing hydrocarbon
service. MR0103 provides material requirements exclusive to
sour petroleum refining environments. Compliance guidelines
are intended to include “wetted” materials as recommended by
both NACE standards. The option code T in several of the general
purpose seal types limits the wetted material offering.
Metallurgical requirements for alloys used are virtually identical
for the two standards, but application conditions enforced are
different and can limit material acceptance. Contact an Emerson
Process Management representative to aid in selecting the
proper materials to meet the NACE standard.
128
Performance specifications
Instrument Toolkit calculates the remote seal system
performance and validates model number configuration.
Remote Seal System Performance Calculation
Report (QZ Option)
When the QZ option code is specified within the pressure
transmitter model structure, Emerson will generate a remote
seal system calculation report for the given application. This
report quantifies all aspects of remote seal system performance
including seal temperature effects, head temperature effects,
seal response time, and transmitter total probable error.
Physical specifications
Material selection
Emerson provides a variety of Rosemount products with various
product options and configurations including materials of
construction that can be expected to perform well in a wide
range of applications. The Rosemount product information
presented is intended as a guide for the purchaser to make an
appropriate selection for the application. It is the purchaser’s
sole responsibility to make a careful analysis of all process
parameters (such as all chemical components, temperature,
pressure, flow rate, abrasives, contaminants, etc.), when
specifying product materials, options, and components for the
particular application. Emerson Process Management is not in a
position to evaluate or guarantee the compatibility of the
process fluid or other process parameters with the product
options, configuration, or materials of construction selected.
Note
If a lower housing is supplied, then the following gaskets
are the default gaskets for each seal unless another gasket
option is selected.
www.rosemount.com
March 2015
Rosemount DP Level
Wetted materials
Seal
Gaskets
FFW
FCW
FUW
FVW
RCW
RFW
RTW
PFW
PCW
SSW
STW
UCW
UCP
WSP
WBW
WFW
WTW
WWW
ThermoTork TN-9000 gasket
No gasket is supplied
No gasket is supplied
No gasket is supplied
Klinger C-4401 gasket
Klinger C-4401 gasket
Klinger C-4401 gasket
ThermoTork TN-9000 gasket
No gasket is supplied
Ethylene Propylene O-ring
Ethylene Propylene O-ring
Teflon O-ring
Barium-Sulfate Filled PTFE O-ring
Klinger C-4401 gasket
Klinger C-4401 gasket
Klinger C-4401 gasket
Klinger C-4401 gasket
Klinger C-4401 gasket
Tagging
The 1199 Remote Seal model number is marked on the
transmitter nameplate (neck or top label). The pressure
transmitter will be tagged in accordance with customer
requirements. The standard stainless steel tag is wired to the
transmitter. Tag is 0.02-in. (0.051 cm) thick with 0.125-in.
(0.318 cm) high letters. A permanently attached tag is available
upon request.
Calibration
Transmitters are factory calibrated to customer’s specified
range. If calibration is not specified, then the transmitters are
calibrated at maximum range. Calibration is performed at
ambient temperature and pressure.
www.rosemount.com
129
Rosemount DP Level
March 2015
Rosemount 3051S/3051S ERS Certifications
European Directive Information
Special Condition for Safe Use (X):
1. The Model 3051S/3051S ERS Pressure Transmitter
contains aluminum and is considered to constitute a
potential risk of ignition by impact or friction. Care must
be taken into account during installation and use to
prevent impact and friction.
A copy of the EC Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EC
Declaration of Conformity can be found at
www.rosemount.com.
Ordinary Location Certification from FM
Approvals
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical,
mechanical, and fire protection requirements by FM Approvals,
a nationally recognized test laboratory (NRTL) as accredited by
the Federal Occupational Safety and Health Administration
(OSHA).
Note
Transmitters marked with NI CL 1, DIV 2 can be installed in
Division 2 locations using general Division 2 wiring methods
or Nonincendive Field Wiring (NIFW). See Drawing
03151-1006.
IE
FM FISCO Field Device
Certificate:3012350
Standards: FM Class 3600 – 2011, FM Class 3610 – 2010,
FM Class 3611 – 2004, FM Class 3810 – 2005,
NEMA 250 –2003
Markings: IS CL I, DIV 1, GP A, B, C, D (-50 °C ≤ Ta ≤ +60 °C);
when connected per Rosemount drawing
03151-1006; Type 4x
North America
The US National Electrical Code (NEC) and the Canadian
Electrical Code (CEC) permit the use of Division marked
equipment in Zones and Zone marked equipment in Divisions.
The markings must be suitable for the area classification, gas,
and temperature class. This information is clearly defined in the
respective codes.
USA
E5
I5
130
FM Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate: 3008216
Standards: FM Class 3600 – 2011, FM Class 3615 – 2006,
FM Class 3616-2011, 3810 – 2005, ANSI/NEMA
250 – 2003
Markings: XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F,
G; CL III;T5(-50 °C ≤ Ta ≤ +85 °C); Factory
Sealed; Type 4X
FM Intrinsic Safety (IS) and Nonincendive (NI)
Certificate: 3012350
Standards: FM Class 3600 – 2011, FM Class 3610 – 2010,
FM Class 3611 – 2004, FM Class 3810 – 2005,
NEMA 250 –2003
Markings: IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F,
G; Class III; Class 1, Zone 0 AEx ia IIC T4; NI CL 1,
DIV 2, GP A, B, C, D; T4(-50°C ≤ Ta ≤ +70°C)
[HART]; T4(-50 °C ≤ Ta ≤ +60 °C) [fieldbus];
when connected per Rosemount drawing
03151-1006; Type 4x
Special Condition for Safe Use (X):
1. The Model 3051S/3051S ERS Pressure Transmitter
contains aluminum and is considered to constitute a
potential risk of ignition by impact or friction. Care must
be taken into account during installation and use to
prevent impact and friction.
Canada
E6
CSA Explosionproof, Dust-Ignitionproof, and Division 2
Certificate: 143113
Standards: CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No.
25-1966, CSA Std C22.2 No. 30-M1986,
CAN/CSA C22.2 No. 94-M91, CSA Std C22.2
No. 142-M1987, CSA Std C22.2 No.
213-M1987, ANSI/ISA 12.27.01-2003, CSA
Std C22.2 No. 60529:05
Markings: Explosionproof Class I, Division 1, Groups B, C,
D; Dust-Ignitionproof Class II, Division 1,
Groups E, F, G; Class III; suitable for Class I, Zone
1, Group IIB+H2, T5; suitable for Class I,
Division 2, Groups A, B, C, D; suitable for Class I,
Zone 2, Group IIC, T5; when connected per
Rosemount drawing 03151-1013; Type 4x
www.rosemount.com
March 2015
I6
Rosemount DP Level
CSA Intrinsically Safe
Certificate: 1143113
Standards: CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No.
30-M1986, CAN/CSA C22.2 No. 94-M91, CSA}
Std C22.2 No. 142-M1987, CSA Std C22.2 No.
157-92, ANSI/ISA 12.27.01-2003, CSA Std
C22.2 No. 60529:05
Markings: Intrinsically Safe Class I, Division 1; suitable for
Class 1, Zone 0, IIC, T3C; when connected per
Rosemount drawing 03151-1016; Type 4x
IF
CSA FISCO Field Device
Certificate: 1143113
Standards: CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No.
30-M1986, CAN/CSA C22.2 No. 94-M91, CSA
Std C22.2 No. 142-M1987, CSA Std C22.2 No.
157-92, ANSI/ISA 12.27.01-2003, CSA Std
C22.2 No. 60529:05
Markings: FISCO Intrinsically Safe Class I, Division 1;
suitable for Class I, Zone 0; T3C; when installed
per Rosemount drawing 03151-1016; Type 4X
Europe
E1
ATEX Flameproof
Certificate: KEMA 00ATEX2143X
Standards: EN 60079-0:2012, EN 60079-1: 2007, EN
60079-26:2007 (3051SFx models with RTD are
certified to EN60079-0:2006)
Markings:
II 1/2 G Ex d IIC T6…T4 Ga/Gb,
T6(-60 °C ≤ Ta ≤ +70 °C), T5/
T4(-60 °C ≤ Ta ≤ +80 °C)
I1
ATEX Intrinsic Safety
Certificate: BAS01ATEX1303X
Standards: EN 60079-0: 2012, EN 60079-11: 2012
Markings:
II 1 G Ex ia IIC T4 Ga, T4(-60 °C ≤ Ta ≤ +70 °C)
Input Parameters
Model
Ui
Ii
Pi
Ci
Li
SuperModule
30 V
300 mA
1.0 W
30 nF
0
3051S...A;
3051SF…A;
3051SAL…C
30 V
300 mA
1.0 W
12 nF
0
3051S…F;
3051SF…F
30 V
300 mA
1.3 W
0
0
17.5 V 380 mA 5.32 W
0
0
3051S …F…IA;
3051SF …F…IA
3051S …A…M7,
M8, or M9;
3051SF
…A…M7, M8, or
M9;
3051SAL…C…
M7, M8, or M9
30 V
300 mA
1.0 W
11.4 nF
60 μ H
3051SAL or
3051SAM
30 V
300 mA
1.0 W
11.4 nF
33 μH
3051SAL…M7,
M8, or M9
3051SAM…M7,
M8, or M9
30 V
300 mA
1.0 W
11.4 nF
93 μH
RTD Option for
3051SF
5V
500 mA 0.63 W
N/A
N/A
Temperature class Process temperature
T6
-60 °C to +70 °C
T5
-60 °C to +80 °C
T4
-60 °C to +120 °C
Special Conditions for Safe Use (X):
1. The Model 3051S Transmitters fitted with transient
protection are not capable of withstanding the 500V test
as defined in Clause 6.3.13 of EN 60079-11:2012. This
must be taken into account during installation.
2. The terminal pins of the Model 3051S SuperModule must
be provided with a degree of protection of at least IP20 in
accordance with IEC/EN 60529.
Special Conditions for Safe Use (X):
1. The device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
IA
ATEX FISCO Field Device
Certificate: BAS01ATEX1303X
Standards: EN 60079-0: 2012, EN 60079-11: 2012
Markings: II 1 G Ex ia IIC T4 Ga, T4(-60 °C ≤ Ta ≤ +70 °C)
2. For information on the dimensions of the flameproof
joints, the manufacturer shall be contacted.
www.rosemount.com
FISCO
Voltage Ui
17.5 V
Current Ii
380 mA
Power Pi
5.32 W
Capacitance Ci
0
Inductance Li
0
131
Rosemount DP Level
Special Conditions for Safe Use (X):
1. The Model 3051S Transmitters fitted with transient
protection are not capable of withstanding the 500V test
as defined in Clause 6.3.13 of EN 60079-11:2012. This
must be taken into account during installation.
2. The terminal pins of the Model 3051S SuperModule must
be provided with a degree of protection of at least IP20 in
accordance with IEC/EN 60529.
ND
ATEX Dust
Certificate: BAS01ATEX1374X
Standards: EN 60079-0: 2012, EN 60079-31: 2009
Markings:
II 1 D Ex ta IIIC T105 °C T50095 °C Da, (-20 °C ≤
Ta ≤ +85 °C), Vmax = 42.4V
Special Conditions for Safe Use (X):
1. Cable entries must be used which maintain the ingress
protection of the enclosure to at least IP66.
2. Unused cable entries must be filled with suitable blanking
plugs which maintain the ingress protection of the
enclosure to at least IP66.
3. Cable entries and blanking plugs must be suitable for the
ambient temperature range of the apparatus and capable
of withstanding a 7J impact test.
4. The SuperModule(s) must be securely screwed in place to
maintain the ingress protection of the enclosure(s).
N1
ATEX Type n
Certificate: BAS01ATEX3304X
Standards: EN 60079-0: 2012, EN 60079-15: 2010
Markings:
II 3 G Ex nA IIC T5 Gc, (-40 °C ≤ Ta ≤ +85 °C),
Vmax = 45V
Special Condition for Safe Use (X):
1. The equipment is not capable of withstanding the 500V
insulation test required by clause 6.5 of EN
60079-15:2010. This must be taken into account when
installing the equipment.
Note
RTD Assembly is not included with the 3051SFx Type n Approval.
132
March 2015
International
E7
IECEx Flameproof and Dust
Certificate: IECEx KEM 08.0010X (Flameproof)
Standards: IEC 60079-0:2011, IEC 60079-1: 2007, IEC
60079-26:2006, (3051SFx models with RTD are
certified to IEC 60079-0:2004)
Markings: Ex d IIC T6…T4 Ga/Gb, T6(-60 °C ≤ Ta ≤ +70 °C),
T5/T4(-60 °C ≤ Ta ≤ +80 °C)
Temperature class
Process temperature
T6
-60 °C to +70 °C
T5
-60 °C to +80 °C
T4
-60 °C to +120 °C
Special Conditions for Safe Use (X):
1. The device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
2. For information on the dimensions of the flameproof joints
the manufacturer shall be contacted.
Certificate: IECEx BAS 09.0014X (Dust)
Standards: IEC 60079-0:2011, IEC 60079-31:2008
Markings: Ex ta IIIC T105°C T50095°C Da,
(-20 °C ≤ Ta ≤ +85 °C), Vmax = 42.4V
Special Conditions for Safe Use (X):
1. Cable entries must be used which maintain the ingress
protection of the enclosure to at least IP66.
2. Unused cable entries must be filled with suitable blanking
plugs which maintain the ingress protection of the
enclosure to at least IP66.
3. Cable entries and blanking plugs must be suitable for the
ambient temperature range of the apparatus and capable
of withstanding a 7J impact test.
4. The 3051S- SuperModule must be securely screwed in
place to maintain the ingress protection of the enclosure.
www.rosemount.com
March 2015
I7
Rosemount DP Level
IECEx Intrinsic Safety
Certificate: IECEx BAS 04.0017X
Standards: IEC 60079-0: 2011, IEC 60079-11: 2011
Markings: Ex ia IIC T4 Ga, T4(-60 °C ≤ Ta ≤ +70 °C)
I7
Ui
Ii
Pi
Ci
Li
SuperModule
30 V
300 mA
1.0 W
30 nF
0
3051S...A;
3051SF…A;
3051SAL…C
30 V
300 mA
1.0 W
12 nF
0
3051S…F;
3051SF…F
30 V
300 mA
1.3 W
0
0
3051S …F…IA;
3051SF …F…IA
17.5
V
380 mA
5.32 W
0
0
Model
1. If the apparatus is fitted with an optional 90V transient
suppressor, it is not capable of withstanding the 500V
insulation test required by clause 6.6.13 of IEC60079-11.
This must be taken into account when installing the
apparatus.
2. It is a condition of safe use that the following parameters
shall be taken into account during installation.
Input parameters
Ui
Ii
Pi
Ci
Li
SuperModule
30 V
300 mA
1.0 W
30 nF
0
3051S...A;
3051SF…A;
3051SAL…C
30 V
300 mA
1.0 W
12 nF
0
3051S…F;
3051SF…F
30 V
300 mA
1.3 W
0
0
3051S …F…IA;
3051SF …F…IA
17.5
V
380 mA
5.32 W
0
0
3051S
…A…M7, M8,
or M9; 3051SF
…A…M7, M8,
or M9;
3051SAL…C…
M7, M8, or M9
30 V
300 mA
1.0 W
11.4 nF
60 μ H
3051SAL or
3051SAM
30 V
300 mA
1.0 W
11.4 nF
33 μ H
3051SAL…M7,
M8, or M9
3051SAM…M7
, M8, or M9
30 V
300 mA
1.0 W
11.4 nF
93 μ H
RTD Option for
3051SF
5V
500 mA
0.63 W
N/A
N/A
Model
3051S
…A…M7, M8,
or M9; 3051SF
…A…M7, M8,
or M9;
3051SAL…C…
M7, M8, or M9
30 V
3051SAL or
3051SAM
30 V
300 mA
1.0 W
11.4 nF
33 μH
3051SAL…M7,
M8, or M9
3051SAM…M7
, M8, or M9
30 V
300 mA
1.0 W
11.4 nF
93 μ H
RTD Option for
3051SF
5V
500 mA
0.63 W
N/A
N/A
300 mA
1.0 W
11.4 nF
60 μ H
Special Conditions for Safe Use (X):
1. The Model 3051S Transmitters fitted with transient
protection are not capable of withstanding the 500V test
as defined in Clause 6.3.13 of IEC 60079-11:2011. This
must be taken into account during installation.
2. The terminal pins of the Model 3051S SuperModule must
be provided with a degree of protection of at least IP20 in
accordance with IEC/EN 60529.
3. The Model 3051S enclosure may be made of aluminum
alloy and given a protective polyurethane paint finish;
however, care should be taken to protect it from impact or
abrasion if located in a zone 0 area.
www.rosemount.com
IECEx Intrinsic Safety – Group I - Mining (I7 with Special
A0259)
Certificate: IECEx TSA 14.0019X
Standards: IEC 60079-0: 2011, IEC 60079-11: 2011
Markings: Ex ia I Ma (-60 °C ≤ Ta ≤ +70 °C)
3. It is a condition of manufacture that only the apparatus
fitted with housings, junction boxes, covers and sensor
module housings made out of stainless steel are used in
Group I applications.
133
Rosemount DP Level
IG
March 2015
IECEx FISCO
Certificate: IECEx BAS 04.0017X
Standards: IEC 60079-0: 2011, IEC 60079-11: 2011
Markings: Ex ia IIC T4 Ga, T4(-60 °C ≤ Ta ≤ +70 °C)
Special Conditions for Safe Use (X):
1. For ambient temperature above 60 °C, cable wiring must
have minimum isolation temperature of 90 °C, to be in
accordance to equipment operation temperature.
FISCO
Voltage Ui
17.5 V
Current Ii
380 mA
Power Pi
5.32 W
Capacitance Ci
0
Inductance Li
0
2. The device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
I2
Special Conditions for Safe Use (X):
1. The Model 3051S Transmitters fitted with transient
protection are not capable of withstanding the 500V test
as defined in Clause 6.3.13 of IEC 60079-11:2011. This
must be taken into account during installation.
2. The terminal pins of the Model 3051S SuperModule must
be provided with a degree of protection of at least IP20 in
accordance with IEC/EN 60529.
Special Conditions for Safe Use (X):
1. The Model 3051S Transmitters fitted with transient
protection are not capable of withstanding the 500V test
as defined in Clause 6.4.12 of IEC 60079-11. This must be
taken into account during installation.
3. The Model 3051S enclosure may be made of aluminum
alloy and given a protective polyurethane paint finish;
however, care should be taken to protect it from impact or
abrasion if located in a zone 0 area.
N7
IECEx Type n
Certificate: IECEx BAS 04.0018X
Standards: IEC 60079-0: 2011, IEC 60079-15: 2010
Markings: Ex nA IIC T5 Gc, (-40 °C ≤ Ta ≤ +85 °C)
Special Conditions for Safe Use (X):
1. The equipment is not capable of withstanding the 500V
insulation test required by clause 6.5 of IEC
60079-15:2010. This must be taken into account when
installing the equipment.
Brazil
E2
134
INMETRO Flameproof
Certificate: CEPEL 03.0140X [Mfg USA, Singapore,
Germany], CEPEL 07.1413X [Mfg Brazil]
Standards: ABNT NBR IEC 60079-0:2008, ABNT NBR IEC
60079-1:2009, ABNT NBR IEC 60529:2009
Markings: Ex d IIC T* Ga/Gb, T6(-40 °C ≤ Ta ≤ +65 °C),
T5(-40 °C ≤ Ta ≤ +80 °C), IP66(Al)/IP66W(SST)
INMETRO Intrinsic Safety
Certificate: CEPEL 05.0722X [Mfg USA, Singapore,
Germany], CEPEL 07.1414X [Mfg Brazil]
Standards: ABNT NBR IEC 60079-0:2008, ABNT NBR IEC
60079-11:2009, ABNT NBR IEC
60079-26:2008, ABNT
NBR IEC 60529:2009
Markings: Ex ia IIC T4 Ga, T4(-20 °C ≤ Ta ≤ +70 °C),
IP66(Al)/IP66W(SST)
IB
HART
Fieldbus
RTD
(for 3051SFx)
Voltage Ui
30 V
30 V
5V
Current Ii
300 mA
300 mA
500 mA
Power Pi
1W
1.3 W
0.63 W
Capacitance Ci
12 nF
0
0
Inductance Li
0
0
0
INMETRO FISCO
Certificate: CEPEL 05.0722X [Mfg USA, Singapore,
Germany], CEPEL 07.1414X [Mfg Brazil]
Standards: ABNT NBR IEC 60079-0:2008, ABNT NBR IEC
60079-11:2009, ABNT NBR IEC
60079-26:2008, ABNT
NBR IEC 60529:2009
Markings: Ex ia IIC T4 Ga, T4(-20 °C ≤ Ta ≤ +40 °C),
IP66(Al)/IP66W(SST)
FISCO
Voltage Ui
17.5 V
Current Ii
380 mA
Power Pi
5.32 W
Capacitance Ci
0
Inductance Li
0
www.rosemount.com
March 2015
Rosemount DP Level
Special Condition for Safe Use (X):
1. The Model 3051S Transmitters fitted with transient
protection are not capable of withstanding the 500V test
as defined in Clause 6.4.12 of IEC 60079-11. This must be
taken into account during installation.
China
E3
China Flameproof and Dust Ignition-proof
Certificate: 3051S: GYJ091035 [Mfg USA], GYJ111400X
[Mfg China, Singapore]
3051SFx: GYJ071086 [Mfg USA, China,
Singapore]
Standards: 3051S: GB3836.1-2000, GB3836.2-2000,
GB12476.1-20003051SFx: GB3836.1-2000,
GB3836.2-2000, GB12476.1-2000
Markings: 3051S: Ex d IIC T5/T6; DIP A20TA105°C; IP66
3051SFx: Ex d IIC T5/T6; Ex d IIB+H2T3~T5; DIP
A21 TA T3~T5
11. When installation, use and maintenance of transmitter,
observe following standards:
• GB3836.13-1997 “Electrical apparatus for explosive gas
atmospheres Part 13: Repair and overhaul for apparatus used in
explosive gas atmospheres”
• GB3836.15-2000 “Electrical apparatus for explosive gas
atmospheres Part 15: Electrical installations in hazardous area
(other than mines)”
• GB50257-1996 “Code for construction and acceptance of electric
device for explosion atmospheres and fire hazard electrical
equipment installation engineering”
• GB15577-1995 “Safe regulation for explosive dust atmospheres”
• GB12476.2-2006 “Electrical apparatus for use in the presence of
combustible dust – Part 1-2: Electrical apparatus protected by
enclosures and surface temperature limitation – Selection,
installation and maintenance”
I3
China Intrinsic Safety
Certificate: 3051S: GYJ111401X [Mfg USA, China,
Singapore]
3051SF: GYJ11.1707X [Mfg USA, China,
Singapore]
Standards: 3051S: GB3836.1-2000, GB3836.4-2000
3051SF: GB3836.1/4-2010, GB3836.20-2010
GB12476.1-2000
Markings: 3051S: Ex ia IIC T4
3051SF: Ex ia IIC T4 Ga, DIP A20 TA105 °C IP66
Special Conditions for Safe Use (X):
1. Only the pressure transmitters, consisting of 3051SC
Series, 3051ST Series, 3051SL Series and 300S Series, are
certified.
2. The ambient temperature range is (-20 ~+60) °C.
3. The relation between temperature class and maximum
temperature of process medium is as follows:
Temperature
class
Temperature of process
medium (°C)
T5
≤ 95 °C
T4
≤ 130 °C
T3
≤ 190 °C
Special Conditions for Safe Use (X):
1. Symbol “X” is used to denote specific conditions of use:
For output code A and F: This apparatus is not capable of
withstanding the 500V r.m.s. insulation test required by
Clause 6.4.12 of GB3836.4-2000.
2. The ambient temperature range is:
Output code Ambient temperature
4. The earth connection facility in the enclosure should be
connected reliably.
5. During installation, use and maintenance of transmitter,
observe the warning “Don’t open the cover when the
circuit is alive.”
6. During installation, there should be no mixture harm to
flameproof housing.
7. Cable entry, certified by NEPSI with type of protection Ex d
IIC in accordance with GB3836.1-2000 and
GB3836.2-2000, should be applied when installation in
hazardous location. 5 full threads should be in
engagement when the cable entry is assembled onto the
transmitter. When pressure transmitter is used in the
presence of combustible dust, the ingress of protection of
the cable entry should be IP66.
8. The diameter of cable should observe the instruction
manual of cable entry. The compressing nut should be
fastened. The aging of seal ring should be changed in time.
A
-50 °C ≤ Ta ≤+70 °C
F
-50 °C ≤ Ta ≤+60 °C
3. Intrinsically safe parameters:
Output Housing
code
code
Display
code
Maximum Maximum Maximum Maximum Maximum
input
input
input
internal
internal
voltage: current:
power: parameters: parameters:
Ui (V)
Ii (mA)
Pi (W)
Ci (nF)
Li (uH)
A
=00
/
30
300
1
38
0
A
00
/
30
300
1
11.4
2.4
A
00
M7/M8
/M9
30
300
1
0
58.2
F
00
/
30
300
1.3
0
0
F
FISCO
00
/
17.5
500
5.5
0
0
4. The product should be used with Ex-certified associated
apparatus to establish explosion protection system that
can be used in explosive gas atmospheres. Wiring and
terminals should comply with the instruction manual of
the product and associated apparatus.
9. Maintenance should be done in non-hazardous location.
10. End users are not permitted to change any components
inside.
www.rosemount.com
135
Rosemount DP Level
March 2015
5. The cable between this product and associated apparatus
should be shielded cables (the cables must have insulated
shield). The shield has to be grounded reliably in
non-hazardous area.
6. The product complies to the requirements for FISCO field
devices specified in IEC60079-27:2008. For the connection
of an intrinsically safe circuit in accordance FISCO model,
FISCO parameters of this product are as above.
7. End users are not permitted to change any components
inside, but to settle the problem in conjunction with
manufacturer to avoid damage to the product.
8. When installation, use and maintenance of this product,
observe the following standards:
• GB3836.13-1997 “Electrical apparatus for explosive gas
atmospheres Part 13: Repair and overhaul for apparatus used in
explosive gas atmospheres”
• GB3836.15-2000 “Electrical apparatus for explosive gas
atmospheres Part 15: Electrical installations in hazardous area
(other than mines)”
• GB3836.16-2006 “Electrical apparatus for explosive gas
atmospheres Part 16: Inspection and maintenance of electrical
installation (other than mines)”
• GB50257-1996 “Code for construction and acceptance of electric
device for explosion atmospheres and fire hazard electrical
equipment installation engineering”
N3
China Type n
5. 3051S type Pressure Transmitter comply to the
requirements for FISCO field devices specified in
IEC60079-27:2008. For the connection of an intrinsically
safe circuit in accordance FISCO model, FISCO parameters
of 3051S type Pressure Transmitter are listed in the table
above.
6. The product should be used with associated
energy-limited apparatus certified by NEPSI in accordance
with GB 3836.1-2000 and GB 3836.8-2003 to establish
explosion protection system that can be used in explosive
gas atmospheres.
7. The cables between this product and associated
energy-limited apparatus should be shielded cables (the
cables must have insulated shield). The shielded has to be
grounded reliably in non-hazardous area.
8. Maintenance should be done in non-hazardous location.
9. End users are not permitted to change any components
inside, but to settle the problem in conjunction with
manufacturer to avoid damage to the product.
10. When installation, use and maintenance of this product,
observe following standards:
Certificate: 3051S: GYJ101112X [Mfg China]
3051SF: GYJ101125X [Mfg China]
Standards: GB3836.1-2000, GB3836.8-2003
Markings: Ex nL IIC T5
• GB3836.13-1997 “Electrical apparatus for explosive gas
atmospheres Part 13: Repair and overhaul for apparatus used in
explosive gas atmospheres”
Special Conditions for Safe Use (X):
1. Symbol “X” is used to denote specific conditions of use:
The apparatus is not capable of withstanding the 500V test
to earth for one minute. This must be taken into
consideration during installation.
2. The ambient temperature range is: -40 °C ≤ Ta ≤ 70 °C.
3. Cable glands, conduit or blanking plugs, certified by NEPSI
with Ex e or Ex n protection type and IP66 degree of
protection provided by enclosure, should be used on
external connections and redundant cable entries.
4. Energy limiting parameters:
Model
NOTE
Remote Mount Housing is for direct connection to the Model 3051S
HART Terminals +,- and CAN by a cable whose maximum
capacitance and inductance do not exceed 24nF and 60uH
respectively.
Maximum Maximum Maximum Maximum Maximum
input
input
input
internal
internal
Terminal
voltage: current:
power: parameters: parameters:
Ui (V)
Ii (mA)
Pi (W)
Ci (nF)
Li (uH)
3051S-C/T
1 to 5
30
300
1
30
0
3051S HART,
4-20mA/SIS
+,- and
CAN
30
300
1
11.4
0
3051S
fieldbus/Profibus
+ and -
30
300
1.3
0
0
3051S FISCO
+ and -
17.5
380
5.32
0
0
Remote Mount
Housing
+ and -
30
300
1
24
60
• GB3836.15-2000 “Electrical apparatus for explosive gas
atmospheres Part 15: Electrical installations in hazardous area
(other than mines)”
• GB3836.16-2006 “Electrical apparatus for explosive gas
atmospheres Part 16: Inspection and maintenance of electrical
installation (other than mines)”
• GB50257-1996 “Code for construction and acceptance of electric
device for explosion atmospheres and fire hazard electrical
equipment installation engineering”.
Japan
E4
Certificate: TC15682, TC15683, TC15684, TC15685,
TC15686, TC15687, TC15688, TC15689,
TC15690, TC17099, TC17100, TC17101,
TC17102, TC18876
Markings: Ex d IIC T6
Republic of Korea
EP
136
Japan Flameproof
Republic of Korea Flameproof
Certificate: 12-KB4BO-0180X [Mfg USA],
11-KB4BO-0068X [Mfg Singapore]
Markings: Ex d IIC T5 or T6
www.rosemount.com
March 2015
IP
Republic of Korea Intrinsic Safety
Certificate: 12-KB4BO-0202X [HART – Mfg USA],
12-KB4BO-0204X [Fieldbus – Mfg USA],
12-KB4BO-0203X [HART – Mfg Singapore],
13-KB4BO-0296X [Fieldbus – Mfg Singapore]
Markings: Ex d IIC T4
Rosemount DP Level
SDN Det Norske Veritas (DNV) Type Approval
Certificate: A-13243
Intended Use: Det Norske Veritas’ Rules for Classification of
Ships, High Speed & Light Craft, and Det
Norske Veritas’ Offshore Standards
Application:
Location classes
Technical Regulation Customs Union
(EAC)
Type
Temperature
Humidity
Vibration
EMC
Enclosure
EM, IM, KM Contact an Emerson Process Management
representative for additional information.
Combinations
K1
Combination of E1, I1, N1, and ND
K2
Combination of E2 and I2
K5
Combination of E5 and I5
K6
Combination of E6 and I6
K7
Combination of E7, I7, and N7
KA
Combination of E1, I1, E6, and I6
KB
Combination of E5, I5, E6, and I6
KC
Combination of E1, I1, E5, and I5
KD
Combination of E1, I1, E5, I5, E6, and I6
KG
Combination of IA, IE, IF, and IG
3051S
D
B
A
A
D / IP66 / IP68
SLL Lloyds Register (LR) Type Approval
Certificate: 11/60002(E3)
Application: Environmental categories ENV1, ENV2, ENV3,
and ENV5
D3
Custody Transfer – Measurement Canada Accuracy
Approval Certificate: AG-0501, AV-2380C
KM Combination of EM and IM
KP
Combination of EP and IP
Additional Certifications
SBS American Bureau of Shipping (ABS) Type Approval
Certificate: 00-HS145383-6-PDA
Intended Use: Measure gauge or absolute pressure of
liquid, gas or vapor applications on ABS classed vessels,
marine, and offshore installations.
ABS Rules: 2013 Steel Vessels Rules 1-1-4/7.7, 1-1-A3,
4-8-3/1.7,
4-8-3/1.11.1, 4-8-3/13.1
SBV Bureau Veritas (BV) Type Approval
Certificate: 31910/A0 BV
Requirements: Bureau Veritas Rules for the Classification of
Steel Ships
Application: Class Notations: AUT-UMS, AUT-CCS,
AUT-PORT and AUT-IMS
www.rosemount.com
137
Rosemount DP Level
March 2015
Rosemount 3051S Wireless Certifications
European Directive Information
Special Conditions for Safe Use (X):
1. The model 3051SMV Wireless PDP Transmitter shall only be used
with the 701PBKKF Rosemount SmartPower Battery Pack.
A copy of the EC Declaration of Conformity can be found at the end of
the Quick Start Guide. The most recent revision of the EC Declaration of
Conformity can be found at www.rosemount.com.
2. The transmitter may contain more than 10% aluminum and is
considered a potential risk of ignition by impact or friction.
Telecommunication compliance
All wireless devices require certification to ensure that they adhere to
regulations regarding the use of the RF spectrum. Nearly every country
requires this type of product certification.
Emerson is working with governmental agencies around the world to
supply fully compliant products and remove the risk of violating country
directives or laws governing wireless device usage.
FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following conditions: This device may not cause harmful
interference. This device must accept any interference received,
including interference that may cause undesired operation. This device
must be installed to ensure a minimum antenna separation distance of
20 cm from all persons.
3. The surface resistivity of the antenna is greater than 1G Ω . To
avoid electrostatic charge build-up, it must not be rubbed or
cleaned with solvents or a dry cloth.
Note
Transmitters marked with NI CL 1, DIV 2 can be installed in Division 2
locations using general Division 2 wiring methods or Nonincendive Field
Wiring (NIFW). See Drawing 03051-1000.
Canada
I6
Ordinary Location Certification from FM
Approvals
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical, mechanical, and
fire protection requirements by FM Approvals, a nationally recognized
test laboratory (NRTL) as accredited by the Federal Occupational Safety
and Health Administration (OSHA).
North America
The US National Electrical Code (NEC) and the Canadian Electrical Code
(CEC) permit the use of Division marked equipment in Zones and Zone
marked equipment in Divisions. The markings must be suitable for the
area classification, gas, and temperature class. This information is clearly
defined in the respective codes.
USA
I5
138
FM Intrinsic Safety (IS) and Nonincendive (NI)
Certificate: 3027705
Standards: FM Class 3600 – 2011, FM Class 3610 – 2010, FM Class
3611 – 2004, FM Class 3810 – 2005, NEMA 250 –
2003
Markings: IS CL 1, DIV 1, GP 1, B, C, D; CL II, DIV 1, GP E, F, G;
CL III; CL 1, ZONE 0 AEx ia IIC T4; NI CL 1, DIV2, GPA, B,
C, D, T4; DIP CL II, DIV 1, GP E, F, G; CL III, T5; T4
(-50 °C ≤ Ta ≤ +70 °C)/T5(-50 °C ≤ Ta ≤ +85 °C); when
connected per Rosemount drawing 03151-1000;
Type 4X
CSA Intrinsically Safe
Certificate: 1143113
Standards: CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No.
30-M1986, CAN/CSA C22.2 No. 94-M91, CSA Std
C22.2 No. 142-M1987, CSA Std C22.2 No. 157-92,
ANSI/ISA 12.27.01-2003, CSA Std C22.2 No. 60529:05
Markings: Intrinsically Safe Class I, Division 1; suitable for Class 1,
Zone 0, IIC, T3C; when connected per Rosemount
drawing 03151-1010; Type 4x
Europe
I1
ATEX Intrinsic Safety
Certificate: Baseefa13ATEX0127X
Standards: EN 60079-0: 2012, EN 60079-11: 2012
Markings:
II 1 G Ex ia IIC T4 Ga, T4(-60 °C ≤ Ta ≤+70 °C)
Special Conditions for Safe Use (X):
1. The Model 3051S Wireless and Model 3051SMV Wireless
enclosure may be made of aluminum alloy and given a protective
polyurethane paint finish; however, care should be taken to
protect it from impact or abrasion if located in a zone 0 area.
2. The surface resistivity of the antenna is greater than 1G Ω . To
avoid electrostatic charge build-up, it must not be rubbed or
cleaned with solvents or dry cloth.
International
I7
IECEx Intrinsic Safety
Certificate: IECEx BAS 13.0068X
Standards: IEC 60079-0: 2011, IEC 60079-11: 2011
Markings: Ex ia IIC T4 Ga, T4(-60 °C ≤ Ta ≤ +70 °C)
www.rosemount.com
March 2015
Rosemount DP Level
Special Conditions for Safe Use (X):
1. The Model 3051S Wireless and Model 3051SMV Wireless
enclosure may be made of aluminum alloy and given a protective
polyurethane paint finish; however, care should be taken to
protect it from impact or abrasion if located in a zone 0 area.
2. The surface resistivity of the antenna is greater than 1G Ω . To
avoid electrostatic charge build-up, it must not be rubbed or
cleaned with solvents or dry cloth.
Brazil
I2
INMETRO Intrinsic Safety
Certificate: CEPEL 08.1618
Standards: ABNT NBR IEC60079-0:2008, ABNT NBR
IEC60079-11:2009, ABNT NBR IEC 60079-26:2008,
ABNT NBR IEC 60529:2009
Markings: Ex ia IIC T5/T4 Ga, T5(-60 °C ≤ Ta ≤ +40 °C), T4(-60 °C ≤
Ta ≤ +70 °C), IP66(Al)/IP66W(SST)
Note
Not currently available on the 3051S MultiVariable Wireless Transmitter.
China
I3
China Intrinsic Safety
Certificate: GYJ11.1401X; GYJ11.1707X
Standards: GB3836.1-2010, GB3836.4-2010, GB3836.20-2010,
GB12476.1-2000
Markings: Ex ia IIC T4(-50 °C≤ Ta ≤+70 °C)
Special Condition for Safe Use (X):
1. See appropriate certificate.
Note
Not currently available on the 3051S MultiVariable Wireless Transmitter.
Japan
I4
TIIS Intrinsically Safe
Certificate: TC18649, TC18650, TC18657
Markings: Ex ia IIC T4, T4 -20 ≤ Ta ≤ 60 °C
Note
Not currently available on the 3051S MultiVariable Wireless Transmitter.
www.rosemount.com
139
Rosemount DP Level
March 2015
Rosemount 3051 Product Certifications
European Directive Information
IE
FM FISCO
Certificate: 1Q4A4.AX
Standards: FM Class 3600 – 2011, FM Class 3610 – 2010,
FM Class 3611 – 2004, FM Class 3810 – 2005
Markings: IS CL I, DIV 1, GP A, B, C, D when connected per
Rosemount drawing 03031-1019
(-50 °C ≤ Ta ≤ +60 °C); Type 4x
A copy of the EC Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EC
Declaration of Conformity can be found at
www.rosemount.com.
Ordinary Location Certification for FM Approvals
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical,
mechanical, and fire protection requirements by FM Approvals,
a nationally recognized test laboratory (NRTL) as accredited by
the Federal Occupational Safety and Health Administration
(OSHA).
North America
E5
FM Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate: 0T2H0.AE
Special Conditions for Safe Use (X):
1. The Model 3051 transmitter housing contains aluminum
and is considered a potential risk of ignition by impact or
friction. Care must be taken into account during
installation and use to prevent impact and friction.
2. The Model 3051 transmitter with the transient terminal
block (Option code T1) will not pass the 500Vrms
dielectric strength test and this must be taken into
account during installation.
C6
Standards: FM Class 3600 – 1998, FM Class 3615 – 2006,
FM Class 3810 – 2005, ANSI/NEMA 250 – 2003
Standards: ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No. 30
-M1986, CSA Std. C22.2 No.142-M1987, CSA
Std. C22.2. No.157-92, CSA Std. C22.2 No. 213
- M1987, CAN/CSA C22.2 No. 0-10, CSA Std
C22.2 No. 25-1966, CAN/CSA-C22.2 No.
94-M91, CAN/CSA-E60079-0-07,
CAN/CSA-E60079-1-07
Markings: XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F,
G; CL III; T5(-50°C ≤ Ta ≤ +85°C); Factory Sealed;
Type 4X
I5
FM Intrinsic Safety (IS) and Nonincendive (NI)
Certificate: 1Q4A4.AX
Standards: FM Class 3600 – 2011, FM Class 3610 – 2010,
FM Class 3611 – 2004, FM Class 3810 – 2005
Markings: Explosionproof for Class I, Division 1, Groups B,
C and D; Suitable for Class I, Zone 1, Group
IIB+H2, T5; Dust-Ignitionproof Class II, Division
1, Groups E, F, G; Class III Division 1; Intrinsically
Safe Class I, Division 1 Groups A, B, C, D when
connected in accordance with Rosemount
drawing 03031-1024, Temperature Code T3C;
Suitable for Class I, Zone 0; Class I Division 2
Groups A, B, C and D, T5; Suitable for Class I
Zone 2, Group IIC; Type 4X; Factory Sealed;
Single Seal (See drawing 03031-1053)
Markings: IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F, G;
Class III; DIV 1 when connected per Rosemount
drawing 03031-1019; NI CL 1, DIV 2, GP A, B, C,
D; T4(-50 °C ≤ Ta≤ +70 °C) [HART],
T5(-50 °C ≤ Ta≤ +40 °C) [HART];
T4(-50 °C ≤ Ta ≤ +60 °C) [Fieldbus/PROFIBUS];
Type 4x
Special Conditions for Safe Use (X):
1. The Model 3051 transmitter housing contains aluminum
and is considered a potential risk of ignition by impact or
friction. Care must be taken into account during
installation and use to prevent impact and friction.
2. The Model 3051 transmitter with the transient terminal
block (Option code T1) will not pass the 500Vrms
dielectric strength test and this must be taken into
account during installation.
140
CSA Explosionproof, Dust-Ignitionproof, Intrinsic Safety
and Nonincendive
Certificate: 1053834
E6
CSA Explosionproof, Dust-Ignitionproof and Division 2
Certificate: 1053834
Standards: ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No. 30
-M1986, CSA Std. C22.2 No.142-M1987, CSA
Std. C22.2 No. 213 - M1987, CAN/CSA C22.2
No. 0-10, CSA Std C22.2 No. 25-1966,
CAN/CSA-C22.2 No. 94-M91, CAN/CSA-C22.2
No. 157-92, CAN/CSA-E60079-0-07,
CAN/CSA-E60079-1-07
www.rosemount.com
March 2015
Rosemount DP Level
Markings: Explosionproof Class I, Division 1, Groups B, C
and D; Suitable for Class I, Zone 1, Group
IIB+H2, T5; Dust-Ignitionproof for Class II and
Class III, Division 1, Groups E, F and G; Class I,
Division 2, Groups A, B, C and D; Suitable for
Class I Zone 2, Group IIC; Type 4X; Factory
Sealed; Single Seal (See drawing 03031-1053)
Input parameters
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current Ii
200 mA
300 mA
Power Pi
0.9 W
1.3 W
0.012 μF
0 μF
0 mH
0 mH
Capacitance Ci
Europe
E8
Inductance Li
Special Conditions for Safe Use (X):
ATEX Flameproof and Dust
1. The apparatus is not capable of withstanding the 500 V
insulation test required by EN60079-11. This must be
taken into account when installing the apparatus.
Certificate: KEMA00ATEX2013X; Baseefa11ATEX0275X
Standards Used: EN60079-0:2012, EN60079-1:2007,
EN60079-26:2007, EN60079-31:2009
Markings:
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact or abrasion if located in
Zone 0.
II 1/2 G, Ex d IIC T6/T5 Ga/Gb,
T6(-50 °C ≤ Ta ≤ +65 °C),
T5(-50 °C ≤ Ta ≤ +80 °C);
II 1 D Ex ta IIIC T95 °C T500 105 °C Da
(-20 °C ≤ Ta ≤ +85° C)
Process Temperature
3. Some variants of the equipment have reduced markings
on the nameplate. Refer to the Certificate for full
equipment marking.
IA
Temperature class
Process temperature
T6
-50 °C to +65 °C
T5
-50 °C to +80 °C
ATEX FISCO
Certificate: BAS97ATEX1089X
Standards: EN60079-0:2012, EN60079-11:2009
Markings:
II 1 G Ex ia IIC Ga T4(-60 °C ≤ Ta ≤ +60 °C)
Special Conditions for Safe Use (X):
1. This device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
Input parameters
FISCO
2. For information on the dimensions of the flameproof joints
the manufacturer shall be contacted.
3. Some variants of the equipment have reduced markings
on the nameplate. Refer to the Certificate for full
equipment marking.
I1
ATEX Intrinsic Safety and Dust
Certificate: BAS97ATEX1089X; Baseefa11ATEX0275X
Standards: EN60079-0:2012, EN60079-11:2012,
EN60079-31:2009
Markings: HART:
II 1 G Ex ia IIC T5/T4 Ga
T5(-60 °C ≤ Ta ≤ +40°C), T4(-60 °C ≤ Ta ≤ +70 °C)
Fieldbus/PROFIBUS:
II 1 G Ex ia IIC Ga T4(-60
°C ≤ Ta ≤ +60 °C)
DUST:
II 1 D Ex ta IIIC T95 °C T500 105 °C Da
(-20 °C ≤ Ta ≤ +85 °C)
www.rosemount.com
Voltage Ui
17.5 V
Current Ii
380 mA
Power Pi
5.32 W
Capacitance Ci
Inductance Li
<5 nF
<10 μH
Special Conditions for Safe Use (X):
1. The apparatus is not capable of withstanding the 500 V
insulation test required by EN60079-11. This must be
taken into account when installing the apparatus.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact or abrasion if located in
Zone 0.
N1
ATEX Type n and Dust
Certificate: BAS00ATEX3105X; Baseefa11ATEX0275X
Standards: EN60079-0:2012, EN60079-15:2010,
EN60079-31:2009
141
Rosemount DP Level
Markings:
March 2015
II 3 G Ex nA IIC T5 Gc (-40 °C ≤ Ta ≤ +70 °C);
II 1 D Ex ta IIIC T95 °C T500 105 °C Da
(-20 °C ≤ Ta ≤ +85°C)
Special Conditions for Safe Use (X):
1. This apparatus is not capable of withstanding the 500V
insulation test that is required by EN60079-15. This must
be taken into account when installing the apparatus.
2. Some variants of the equipment have reduced markings
on the nameplate. Refer to the Certificate for full
equipment marking.
Markings: HART: Ex ia IIC T5/T4 Ga,
T5(-60 °C ≤ Ta ≤ +40 °C), T4(-60 °C ≤ Ta ≤+70 °C)
Fieldbus/PROFIBUS: Ex ia IIC Ga
T4(-60 °C ≤Ta ≤ +60°C)
Input parameters
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current Ii
200 mA
300 mA
Power Pi
0.9 W
1.3 W
0.012 μF
0 μF
0 mH
0 mH
Capacitance Ci
Inductance Li
International
E7
Special Conditions for Safe Use (X):
IECEx Flameproof and Dust
Certificate: IECEx KEM 09.0034X; IECEx BAS 10.0034X
Standards: IEC60079-0:2011, IEC60079-1:2007-04,
IEC60079-26:2006, IEC60079-31:2008
Markings: Ex d IIC T6/T5 Ga/Gb, T6(-50 °C ≤ Ta ≤ +65 °C),
T5(-50 °C ≤ Ta ≤ +80 °C);
Ex ta IIIC T95 °C T500 105 °C Da (-20 °C ≤ Ta ≤ +85
°C)
Process Temperature
1. If the apparatus is fitted with an optional 90 V transient
suppressor, it is not capable of withstanding the 500 V
insulation test required by IEC 60079-11. This must be
taken into account when installing the apparatus.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however, care should
be taken to protect it from impact or abrasion if located in
Zone 0.
IECEx Mining (Special A0259)
Certificate: IECEx TSA 14.0001X
Temperature class
Process temperature
T6
-50 °C to +65 °C
T5
-50 °C to +80 °C
Standards: IEC60079-0:2011, IEC60079-11:2011
Markings: Ex ia I Ma (-60 °C ≤ Ta ≤ +70 °C)
Input parameters
Special Conditions for Safe Use (X):
1. This device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
2. For information on the dimensions of the flameproof joints
the manufacturer shall be contacted.
3. Some variants of the equipment have reduced markings
on the nameplate. Refer to the Certificate for full
equipment marking.
I7
IECEx Intrinsic Safety
Certificate: IECEx BAS 09.0076X
Standards: IEC60079-0:2011, IEC60079-11:2011
142
HART
Fieldbus/PROFIBUS
FISCO
Voltage Ui
30 V
30 V
17.5 V
Current Ii
200 mA
300 mA
380 mA
Power Pi
0.9 W
1.3 W
5.32 W
0.012 μF
0 μF
<5 nF
0 mH
0 mH
<10 μH
Capacitance Ci
Inductance Li
Special Conditions for Safe Use (X):
1. If the apparatus is fitted with optional 90 V transient
suppressor, it is not capable of withstanding the 500 V
insulation test required by IEC60079-11. This must be
taken into account when installing the apparatus.
2. It is a condition of safe use that the above input
parameters shall be taken into account during installation.
3. It is a condition of manufacture that only the apparatus
fitted with housing, covers and sensor module housing
made out of stainless steel are used in Group I
applications.
www.rosemount.com
March 2015
N7
Rosemount DP Level
IECEx Type n
Certificate: IECEx BAS 09.0077X
Standards: IEC60079-0:2011, IEC60079-15:2010
Markings: Ex nA IIC T5 Gc (-40 °C ≤ Ta ≤ +70 °C)
Special Conditions for Safe Use (X):
1. If the equipment is fitted with an optional 90 V transient
suppressor, it is not capable of withstanding the 500 V
insulation test required by ABNT NBR IRC 60079-11:2008.
This must be taken into account when installing the
equipment.
Special Condition for Safe Use (X):
1. The apparatus is not capable of withstanding the 500 V
insulation test required by IEC60079-15. This must be
taken into account when installing the apparatus.
Brazil
E2
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however, care should
be taken to protect it from impact or abrasion if located in
Zone 0.
IB
INMETRO FISCO
Certificate: UL-BR 13.0584X
INMETRO Flameproof
Standards: ABNT NBR IEC60079-0:2008 + Errata 1:2011,
ABNT NBR IEC60079-11:2009
Certificate: UL-BR 13.0643X
Standards: ABNT NBR IEC60079-0:2008 + Errata 1:2011,
ABNT NBR IEC60079-1:2009 + Errata 1:2011,
ABNT NBR IEC60079-26:2008 + Errata 1:2008
Markings: Ex ia IIC T4 Ga (-60 °C ≤ Ta ≤ +60 °C)
Input parameters
Markings: Ex d IIC T6/T5 Ga/Gb, T6(-50 °C ≤ Ta ≤ +65 °C),
T5(-50 °C ≤ Ta ≤ +80 °C)
FISCO
Special Conditions for Safe Use (X):
1. This device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
2. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
3. The capacitance of the wrap around label, being 1.6nF,
exceeds the limit in Table 9 of ABNT NBR IEC 60079-0. The
user shall determine suitability for the specific application.
I2
INMETRO Intrinsic Safety
Certificate: UL-BR 13.0584X
Standards: ABNT NBR IEC60079-0:2008 + Errata 1:2011,
ABNT NBR IEC60079-11:2009
Markings: HART: Ex ia IIC T5/T4 Ga,
T5(-60 °C ≤ Ta ≤ +40 °C), T4(-60 °C ≤ Ta ≤ +70 °C)
Fieldbus/PROFIBUS: Ex ia IIC T4 Ga
(-60 °C ≤ Ta ≤ +60 °C)
Input parameters
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current Ii
200 mA
300 mA
Power Pi
0.9 W
1.3 W
0.012 μF
0 μF
0 mH
0 mH
Capacitance Ci
Inductance Li
www.rosemount.com
Voltage Ui
17.5 V
Current Ii
380 mA
Power Pi
5.32 W
Capacitance Ci
Inductance Li
<5 nF
<10 μH
Special Conditions for Safe Use (X):
1. If the equipment is fitted with an optional 90 V transient
suppressor, it is not capable of withstanding the 500 V
insulation test required by ABNT NBR IRC 60079-11:2008.
This must be taken into account when installing the
equipment.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however, care should
be taken to protect it from impact or abrasion if located in
Zone 0.
China
E3
China Flameproof
Certificate: GYJ14.1041X; GYJ10.1313X [Flowmeters]
Standards: GB3836.1-2000, GB3836.2-2010,
GB12476-2000
Markings: Ex d IIC T6/T5, T6(-50 °C ≤ Ta ≤ +65 °C),
T5(-50 °C ≤ Ta ≤ +80°C)
143
Rosemount DP Level
March 2015
Special Conditions for Safe Use (X):
1. The relation between ambient temperature arrange and
temperature class is as follows:
Ta
Temperature class
-50 °C~+80 °C
T5
-50 °C~+65 °C
T6
When used in a combustible dust environment, the
maximum ambient temperature is 80 °C.
2. The earth connection facility in the enclosure should be
connected reliably.
3. Cable entry certified by notified body with type of
protection Ex d IIC in accordance with GB3836.1-2000 and
GB3836.2-2000, should be applied when installed in a
hazardous location. When used in combustible dust
environment, cable entry in accordance with IP66 or
higher level should be applied.
4. Obey the warning “Keep tight when the circuit is alive.”
5. End users are not permitted to change any internal
components.
6. During installation, use and maintenance of this product,
observe the following standards:
GB3836.13-1997 “Electrical apparatus for explosive gas
atmospheres Part 13: Repair and overhaul for apparatus
used in explosive gas atmospheres”
GB3836.15-2000 “Electrical apparatus for explosive gas
atmospheres Part 15: Electrical installations in hazardous
area (other than mines)”
GB3836.16-2006 “Electrical apparatus for explosive gas
atmospheres Part 16: Inspection and maintenance of
electrical installation (other than mines)”
GB50257-1996 “Code for construction and acceptance of
electric device for explosion atmospheres and fire hazard
electrical equipment installation engineering”.
GB12476.2-2006 “Electrical apparatus for use in the
presence of combustible dust Part 1-2: Electrical apparatus
protected by enclosures and surface temperature
limitation-Selection, installation and maintenance”
GB15577-2007 “Safety regulations for dust explosion
prevention and protection”
I3
China Intrinsic Safety
Certificate: GYJ13.1362X; GYJ101312X [Flowmeters]
Standards: GB3836.1-2010, GB3836.4-2010,
GB3836.20-2010, GB12476.1-2000
Markings: Ex ia IIC Ga T4/T5
Special Conditions for Safe Use (X):
1. Symbol “X” is used to denote specific conditions of use:
a.If the apparatus is fitted with an optional 90V transient
suppressor, it is not capable of withstanding the 500V
insulation test for 1 minute. This must be taken into
account when installing the apparatus.
b.The enclosure may be made of aluminum alloy and
given a protective polyurethane paint finish; however,
care should be taken to protect it from impact or
abrasion if located in Zone 0.
2. The relation between T code and ambient temperature
range is:
Model
T
code
Temperature
range
HART
T5
-60°C ≤ Ta ≤ +40°C
HART
T4
-60°C ≤ Ta ≤ +70°C
Fieldbus/PROFIBUS/FISCO
T4
-60°C ≤ Ta ≤ +60°C
Flowmeter with 644 Temp
Housing
T4
-40°C ≤ Ta ≤ +60°C
3. Intrinsically Safe parameters:
Input parameters
HART
Fieldbus/PROFIBUS
FISCO
Voltage Ui
30 V
30 V
17.5 V
Current Ii
200 mA
300 mA
380 mA
Power Pi
0.9 W
1.3 W
5.32 W
0.012 μF
0 μF
<5 nF
0 mH
0 mH
<10 μH
Capacitance Ci
Inductance Li
Note 1: FISCO parameters apply to both Group IIC and IIB.
Note 2: [For Flowmeters] When 644 Temperature
Transmitter is used, it should be used with Ex-certified
associated apparatus to establish explosion protection
system that can be used in explosive gas atmospheres.
Wiring and terminals should comply with the instruction
manual of both 644 Temperature Transmitter and
associated apparatus. The cables between 644
Temperatures Transmitter and associated apparatus
should be shielded cables (the cables must have insulated
shield). The shielded cable has to be grounded reliably in a
non-hazardous area.
4. Transmitters comply with the requirements for FISCO field
devices specified in IEC60079-27:2008. For the connection
of an intrinsically safe circuit in accordance with FISCO
Model, FISCO parameters are listed in the table above.
5. The product should be used with Ex-certified associated
apparatus to establish explosion protection system that
can be used in explosive gas atmospheres. Wiring and
terminals should comply with the instruction manual of
the product and associated apparatus.
144
www.rosemount.com
March 2015
6. The cables between this product and associated apparatus
should be shielded cables (the cables must have insulated
shield). The shielded cable has to be grounded reliably in a
non-hazardous area.
7. End users are not permitted to change any intern
components but to settle the problem in conjunction with
the manufacturer to avoid damage to the product.
8. During installation, use and maintenance of this product,
observe the following standards:
GB3836.13-1997 “Electrical apparatus for explosive gas
atmospheres Part 13: Repair and overhaul for apparatus
used in explosive gas atmospheres”
GB3836.15-2000 “Electrical apparatus for explosive gas
atmospheres Part 15: Electrical installations in hazardous
area (other than mines)”
GB3836.16-2006 “Electrical apparatus for explosive gas
atmospheres Part 16: Inspection and maintenance of
electrical installation (other than mines)”
GB50257-1996 “Code for construction and acceptance of
electric device for explosion atmospheres and fire hazard
electrical equipment installation engineering”.
GB12476.2-2006 “Electrical apparatus for use in the
presence of combustible dust Part 1-2: Electrical apparatus
protected by enclosures and surface temperature
limitation-Selection, installation and maintenance”
GB15577-2007 “Safety regulations for dust explosion
prevention and protection”
N3
China Type n
Certificate: GYJ101111X
Rosemount DP Level
Special Conditions for Safe Use (X):
1. Symbol “X” is used to denote specific conditions of use:
The apparatus is not capable of withstanding the 500V test
to earth for one minute. The must be taken into
consideration during installation.
2. The ambient temperature range is -40°C ≤ Ta ≤ +70°C.
3. Maximum input voltage: 55V.
4. Cable glands, conduit or blanking plugs, certified by NEPSI
with Ex e or Ex n protection type and IP66 degree of
protection provided by enclosure, should be used on
external connections and redundant cable entries.
5. Maintenance should be done in non-hazardous location.
6. End users are not permitted to change any internal
components but to settle the problem in conjunction with
manufacturer to avoid damage to the product.
7. During installation, use and maintenance of this product,
observe the following standards:
GB3836.13-1997 “Electrical apparatus for explosive gas
atmospheres Part 13: Repair and overhaul for apparatus
used in explosive gas atmospheres”
GB3836.15-2000 “Electrical apparatus for explosive gas
atmospheres Part 15: Electrical installations in hazardous
area (other than mines)”
GB3836.16-2006 “Electrical apparatus for explosive gas
atmospheres Part 16: Inspection and maintenance of
electrical installation (other than mines)”
GB50257-1996 “Code for construction and acceptance of
electric device for explosion atmospheres and fire hazard
electrical equipment installation engineering”
Standards: GB3836.1-2000, GB3836.8-2003
Markings: Ex nA IIC T5 (-40 °C ≤ Ta ≤ +70 °C)
Japan
E4
Japan Flameproof
Certificate: TC20577, TC20578, TC20583, TC20584
[HART]; TC20579, TC20580, TC20581,
TC20582 [Fieldbus]
Markings: Ex d IIC T5
www.rosemount.com
145
Rosemount DP Level
March 2015
Technical Regulations Customs Union
(EAC)
EM, IM, KM
Contact an Emerson Process Management
representative for further information.
Combinations
K2
Combination of C6, E8, and I1
K7
Combination of E7, I7, and N7
K8
combination of E8, I1, and N1
KB
Combination of E5, I5, and C6
KD
Combination of E8, I1, E5, I5, and C6
Conduit Plugs and Adapters
IECEx Flameproof and Increased Safety
Certificate: IECEx FMG 13.0032X
Standards: IEC60079-0:2011, IEC60079-1:2007,
IEC60079-7:2006-2007
Markings: Ex de IIC Gb
ATEX Flameproof and Increased Safety
Certificate: FM13ATEX0076X
Standards: EN60079-0:2012, EN60079-1:2007,
IEC60079-7:2007
II 2 G Ex de IIC Gb
Conduit Plug Thread Sizes
Identification mark
M20 x 1.5
G1/2A
M20
1
1
/2- 14 NPT
/2– 14 NPT
3
/4 - 14 NPT
3/4 – 14 NPT
Female thread
Identification mark
PG 13.5
K6
/2- 14 NPT
M20 x 1.5 – 6H
/2- 14 NPT
Combination of E5 and I5
1
Identification mark
1
K5
Thread
Male thread
M20 x 1.5 – 6H
Combination of E2 and I2
Markings:
Thread Adapter Thread Sizes
M20
1
/2 NPT
G1/2
M20
1
/2 – 14 NPT
PG 13.5
Special Conditions for Safe Use (X):
1. When the thread adapter or blanking plug is used with an
enclosure in type of protection increased safety “e” the
entry thread shall be suitably sealed in order to maintain
the ingress protection rating (IP) of the enclosure.
2. The blanking plug shall not be used with an adapter.
3. Blanking Plug and Threaded Adapter shall be either NPT or
Metric thread forms. G½ and PG 13.5 thread forms are
only acceptable for existing (legacy) equipment
installations.
Additional Certifications
SBS American Bureau of Shipping (ABS) Type Approval
Certificate: 09-HS446883A-PDA
Intended Use: Measure gauge or absolute pressure of
liquid, gas or vapor applications on ABS classed
vessels, marine, and offshore installations.
ABS Rules: 2014 Steel Vessels Rules 1-1-4/7.7, 4-8-3/13.1,
1-1-A3, 4-8-3/1.7, 4-8-3/1.11.1
SBV Bureau Veritas (BV) Type Approval
Certificate: 23155/A3 BV
Requirements: Bureau Veritas Rules for the Classification of
Steel Ships
Application: Class notations: AUT-UMS, AUT-CCS,
AUT-PORT and AUT-IMS; Pressure transmitter
type 3051 cannot be installed on diesel engines
SDN Det Norske Veritas (DNV) Type Approval
Certificate: A-13245
Intended Use: Det Norske Veritas’ Rules for Classification of
Ships, High Speed & Light Craft and Det Norske
Veritas’ Offshore Standards
146
www.rosemount.com
March 2015
Rosemount DP Level
Ordinary Location Certification for FM
Application:
Location classes
Type
3051
Temperature
D
Humidity
B
Vibration
A
EMC
B
Enclosure
D
SLL Lloyds Register (LR) Type Approval
Certificate: 11/60002
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical,
and fire protection requirements by FM, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal
Occupational Safety and Health Administration (OSHA).
North American Certifications
Factory Mutual (FM) approvals
I5
Application: Environmental categories ENV1, ENV2, ENV3
and ENV5
C5
Custody Transfer - Measurement Canada Accuracy
Approval
Certificate: AG-0226; AG-0454; AG-0477
IEC 62591 (WirelessHART Protocol)
Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
Fisher-Rosemount GmbH & Co. — Wessling, Germany
Emerson Process Management Asia Pacific Private Limited —
Singapore
Beijing Rosemount Far East Instrument Co., LTD — Beijing, China
Special Conditions for Safe Use (X):
1. The inline pressure sensor may contain more than 10%
aluminum and is considered a potential risk of ignition by
impact or friction. Care must be taken into account during
installation and use to prevent impact and friction.
2. The surface resistivity of the transmitter is greater than
one gigaohm. To avoid electrostatic charge build-up, it
must not be rubbed or cleaned with solvents or a dry cloth.
European Directive Information
The most recent revision of the EC declaration of conformity can
be found at www.rosemount.com.
3. The Model 3051 Wireless Pressure Transmitter shall only
be used with the 701PGNKF Rosemount SmartPower
Battery Pack.
Telecommunication Compliance
All wireless devices require certification to ensure that they
adhere to regulations regarding the use of the RF spectrum.
Nearly every country requires this type of product certification.
Emerson is working with governmental agencies around the
world to supply fully compliant products and remove the risk of
violating country directives or laws governing wireless device
usage.
CSA - Canadian Standards Association
I6
FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions: This device may not cause
harmful interference. This device must accept any interference
received, including interference that may cause undesired
operation. This device must be installed to ensure a minimum
antenna separation distance of 20 cm from all persons.
www.rosemount.com
FM Intrinsically Safe
Certificate No: 3046325
Applicable Standards: Class 3600:2011, Class 3610:2010,
Class 3810: 2005, ANSI/ISA 60079-0 2009,ANSI/ISA
60079-11:2009&#10;ANSI/NEMA 250:2003, ANSI/IEC
60529:2004
Markings: Intrinsically Safe for Class I, Division I, Groups A,
B, C, D
Zone Marking: Class I Zone 0, AEx ia IIC
T4 (-40 °C to 70 °C)
Intrinsically Safe when installed according to Rosemount
Drawing 03031-1062
Enclosure Type 4X/IP66/IP68/IP67
CSA Intrinsically Safe
Certificate No: 2526009
Applicable Standards: CSA C22.2 No. 0-M91, CSA C22.2
No. 94-M91, CSA C22.2 No. 142-M1987, CSA C22.2 No.
157-92, CSA C22.2 No. 60529-05
Markings: Intrinsically Safe For Class I, Division I, Groups A,
B, C, D T4 (-40 °C to 70 °C) Intrinsically safe when installed
according to Rosemount drawing 03031-1063 Enclosure
Type 4X/IP66/IP68
European Certifications
I1
ATEX Intrinsic Safety
Certificate No: Baseefa12ATEX0228X
Applicable Standards: EN60079-11:2012,
EN60079-0:2012
147
Rosemount DP Level
March 2015
Markings: Ex ia IIC T4 Ga (-40 °C ≤ Ta ≤ 70 °C)
II 1G IP66/68
1180
Special Conditions for Safe Use (X):
1. The plastic enclosure may constitute a potential
electrostatic ignition risk and must not be rubbed or
cleaned with a dry cloth.
I7
IECEx Intrinsic Safety
Certificate No: IECEx BAS 12.0124X
Applicable Standards: IEC60079-11:2011,
IEC60079-0:2011
Markings: Ex ia IIC T4 Ga (-40 °C ≤ Ta ≤ 70 °C)IP66/68
Special Conditions for Safe Use (X):
1. The plastic enclosure may constitute a potential
electrostatic ignition risk and must not be rubbed or
cleaned with a dry cloth.
The Model 701PGNKF Power Module may be replaced in a
hazardous area. The Power Module has a surface resistivity
greater than 1G Ω and must be properly installed in the
wireless device enclosure. Care must be taken during
transportation to and from the point of installation to
prevent electrostatic charge build-up.
148
www.rosemount.com
March 2015
Rosemount DP Level
Rosemount 2051 Product Certifications
European Directive Information
E6
A copy of the EC Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EC
Declaration of Conformity can be found at
www.rosemount.com.
Ordinary Location Certification for Factory Mutual
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical,
mechanical, and fire protection requirements by a nationally
recognized test laboratory (NRTL) as accredited by the Federal
Occupational Safety and Health Administration (OSHA).
Markings: Explosion-Proof for Class I, Divisions 1, Groups
B, C, and D. Dust-Ignition Proof for Class II and
Class III, Division 1, Groups E, F, and G. Suitable
for Class I, Division 2; Groups A, B, C, and D for
indoor and outdoor hazardous locations. Class I
Zone 1 Ex d IIC T5. Enclosure type 4X, factory
sealed. Single Seal.
North America
E5
I5
IE
FM Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate: 3032938
Standards: FM Class 3600 – 2011, FM Class 3615 – 2006,
FM Class 3810 – 2005, ANSI/NEMA 250 –
1991. ANSI/IEC 60529 2004
Markings: XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP
E, F, G; CL III; T5(-50°C Ta +85°C);
Factory Sealed; Type 4X
FM Intrinsic Safety (IS) and Nonincendive (NI)
Certificate: 3033457
Standards: FM Class 3600 – 1998, FM Class 3610 – 2007,
FM Class 3611 – 2004, FM Class 3810 – 2005
Markings: IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E,
F, G; Class III; DIV 1 when connected per
Rosemount drawing 02051-1009; Class I,
Zone 0; AEx ia IIC T4; NI CL 1, DIV 2, GP A, B,
C, D; T4(-50 °C ≤ Ta ≤+70 °C); Type 4x
CSA Explosion-Proof, Dust Ignition Proof
Certificate: 2041384
Standards: CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No.
25-1966, CSA Std C22.2 No. 30-M1986,
CAN/CSA-C22.2 No. 94-M91, CSA Std C22.2
No.142-M1987, CAN/CSA-C22.2 No.157-92,
CSA Std C22.2 No. 213-M1987,
CAN/CSA-E60079-0:07,
CAN/CSA-E60079-1:07,
CAN/CSA-E60079-11-02, CAN/CSA-C22.2 No.
60529:05, ANSI/ISA-12.27.01–2003
I6
CSA Intrinsic Safety
Certificate: 2041384
Standards: CSA Std. C22.2 No. 142 - M1987, CSA Std.
C22.2 No. 213 - M1987, CSA Std. C22.2 No.
157 - 92, CSA Std. C22.2 No. 213 - M1987,
ANSI/ISA 12.27.01 – 2003,
CAN/CSA-E60079-0:07,
CAN/CSA-E60079-11:02
Markings: Intrinsically safe for Class I, Division 1, Groups
A,B, C, and D when connected in accordance
with Rosemount drawings 02051-1008.
Temperature code T3C. Class I Zone 1 Ex ia IIC
T3C. Single Seal. Enclosure Type 4X
FM FISCO
Certificate: 3033457
Standards: FM Class 3600 – 1998, FM Class 3610 – 2007,
FM Class 3611 – 2004, FM Class 3810 – 2005
Markings: IS CL I, DIV 1, GP A, B, C, D when connected per
Rosemount drawing 02051-1009
(-50 °C ≤ Ta ≤ +60 °C); Type 4x
www.rosemount.com
149
Rosemount DP Level
March 2015
Europe
E1
Table 16. Input Parameters
ATEX Flameproof
Certificate: KEMA 08ATEX0090X
Standards: EN60079-0:2006, EN60079-1:2007,
EN60079-26:2007
Markings:
II 1/2 G Ex d IIC T6 IP66 (–50 °C ≤ Ta ≤ 65 °C);
II 1/2 G Ex d IIC T5 IP66 (–50 °C ≤ Ta ≤ 80 °C)
FISCO
Special Conditions for Safe Use (X):
1. The Ex d blanking elements, cable glands and wiring needs
to be suitable for a temperature of 90 °C.
2. This device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for
maintenance shall be followed in detail to assure safety
during its expected lifetime.
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
I1
Current li
380 mA
Power Pi
5.32 W
Capacitance Ci
0 μF
Inductance Li
0 mH
Special Conditions for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact and abrasion when
located in Zone 0.
N1
Table 15. Input Parameters
Special Condition for Safe Use (X):
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current li
200 mA
300 mA
Power Pi
1.0 W
1.3 W
Capacitance Ci
0.012 μF
0 μF
Inductance Li
0 mH
0 mH
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact and abrasion when
located in Zone 0.
150
17.5 V
ATEX Intrinsic Safety
Certificate: Baseefa08ATEX0129X
Standards: EN60079-0:2012, EN60079-11:2012
Markings:
II 1 G Ex ia IIC T4 Ga (–60 °C ≤ Ta ≤ +70 °C)
Special Condition for Safe Use (X):
IA
Voltage Ui
ATEX Type n
Certification: Baseefa08ATEX0130X
Standards: EN60079-0:2012, EN60079-15:2010
Markings:
II 3G Ex nA IIC T4 Gc (-40 °C ≤ Ta ≤ +70 °C)
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
electrical strength test as defined in clause 6.5.1 of by EN
60079-15:2010. This must be taken into account during
installation.
ND ATEX Dust
Certification: Baseefa08ATEX0182X
Standards: EN60079-0:2012, EN60079-31:2009
Markings:
II 1 D Ex ta IIIC T95 °C T500 105 °C
Da (-20 °C ≤ Ta ≤ +85 °C)
Special Condition for Safe Use (X):
If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
ATEX FISCO
Certificate: Baseefa08ATEX0129X
Standards: EN60079-0:2012, EN60079-11:2012
Markings:
II 1 G Ex ia IIC T4 Ga (-60 °C ≤ Ta ≤ +60 °C)
www.rosemount.com
March 2015
Rosemount DP Level
International
E7
Table 19. Input Parameters
FISCO
IECEx Flameproof
Certificate: IECExKEM08.0024X
Standards: IEC60079-0:2004, IEC60079-1:2007-04,
IEC60079-26:2006
Markings: Ex d IIC T6/T5 IP66, T6(-50 °C ≤ Ta ≤ +65 °C),
T5(-50°C ≤ Ta ≤ +80 °C)
Table 17. Process Temperature
Temperature Class
Process Temperature
T6
-50 °C to +65 °C
T5
-50°C to +80°C
Special Conditions for Safe Use (X):
1. The device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for
maintenance shall be followed in detail to assure safety
during its expected lifetime.
I7
IECEx Intrinsic Safety
Certificate: IECExBAS08.0045X
Standards: IEC60079-0:2011, IEC60079-11:2011
Markings: Ex ia IIC T4 Ga (–60 °C ≤ Ta ≤+70 °C)
Table 18. Input Parameters
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current li
200 mA
300 mA
Power Pi
1.0 W
1.3 W
Capacitance Ci
0.012 μF
0 μF
Inductance Li
0 mH
0 mH
Special Condition for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
17.5 V
Current li
380 mA
Power Pi
5.32 W
Capacitance Ci
0 μF
Inductance Li
0 mH
Special Condition for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact and abrasion when
located in Zone 0.
N7
2. The Ex d blanking elements, cable glands, and wiring shall
be suitable for a temperature of 90°C
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
Voltage Ui
IECEx Type n
Certificate: IECExBAS08.0046X
Standards: IEC60079-0:2011, IEC60079-15:2010
Markings: Ex nA IIC T4 Gc (-40°C ≤ Ta ≤ +70°C)
Special Condition for Safe Use (X):
1. If fitted with a 90V transient suppressor, the equipment is
not capable of withstanding the 500V electrical strength
test as defined in clause 6.5.1 of IEC60079-15:2010. This
must be taken into account during installation.
Brazil
E2
INMETRO Flameproof
Certificate: CEPEL 09.1767X, CEPEL 11.2065X, UL-BR
14.0375X
Standards: ABNT NBR IEC60079-0:2008, ABNT NBR
IEC60079-1:2009, ABNT NBR
IEC60079-26:2008, ABNT NBR IEC60529:2009,
ABNT NBR IEC60079-0:2008 + Errata 1:2011,
ABNT NBR IEC 60079-1:2009 + Errata 1:2011,
ABNT NBR IEC 60079-26:2008 + Errata 1:2009
Markings: Ex d IIC T6/T5 Ga/Gb IP66,
T6(-50°C ≤ Ta ≤ +65°C), T5(-50°C ≤ Ta ≤ +80°C)
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact and abrasion when
located in Zone 0.
IG
IECEx FISCO
Certificate: IECExBAS08.0045X
Standards: IEC60079-0:2011, IEC60079-11:2011
Markings: Ex ia IIC T4 Ga (-60 °C ≤ Ta ≤ +60 °C)
www.rosemount.com
151
Rosemount DP Level
March 2015
Special Condition for Safe Use (X):
1. The device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
Special Condition for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is not capable of withstanding the 500V
insulation test required by ABNT NBR IRC 60079-11:2008.
This must be taken into account when installing the
equipment.
2. The Ex d blanking elements, cable glands, and wiring shall
be suitable for a temperature of 90°C
China
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
E3
I2
INMETRO Intrinsic Safety
Certificate: CEPEL 09.1768X, CEPEL 11.2066X
Standards: ABNT NBR IEC60079-0:2008, ABNT NBR
IEC60079-11:2009, ABNT NBR IEC
60079-26: 2008, ABNT NBR IEC60529:2009
Markings: Ex ia IIC T4 Ga IP66W (-60°C ≤ Ta ≤ +70°C)
Table 20. Input Parameters
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current li
200 mA
300 mA
Power Pi
0.9 W
1.3 W
Capacitance Ci
0.012 μF
0 μF
Inductance Li
0 mH
0 mH
Special Condition for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is not capable of withstanding the 500V
insulation test required by ABNT NBR IRC 60079-11:2008.
This must be taken into account when installing the
equipment.
IB
INMETRO FISCO
Certificate: CEPEL 09.1768X, CEPEL 11.2066X
Standards: ABNT NBR IEC60079-0:2008, ABNT NBR
IEC60079-11:2009, ABNT NBR IEC
60079-26: 2008, ABNT NBR IEC60529:2009
Markings: Ex ia IIC T4 Ga IP66W (-60°C ≤ Ta ≤ +60°C)
Table 21. Input Parameters
FISCO
152
China Flameproof
Certificate: GYJ13.1386X; GYJ101321X [Flowmeters]
Standards: GB3836.1-2000, GB3836.2-2000
Markings: Ex d IIC T6/T5, T6(-50°C ≤ Ta ≤ +65°C),
T5(-50°C ≤ Ta ≤ +80°C)
Special Condition for Safe Use (X):
1. Symbol “X” is used to denote specific conditions of use:

The Ex d blanking elements, cable glands, and wiring
shall be suitable for a temperature of 90°C

This device contains a thin wall diaphragm.
Installation, maintenance and use shall take into
account the environment conditions to which the
diaphragm will be subjected.
2. The relation between T code and ambient temperature
range is:
Ta
Temperature Class
-50 °C ≤ Ta ≤ +80 °C
T5
-50 °C ≤ Ta ≤ +65 °C
T6
3. The earth connection facility in the enclosure should be
connected reliably.
4. During installation, use and maintenance of the product,
observe the warning “Don’t open the cover when the
circuit is alive.”
5. During installation, there should be no mixture harmful to
flameproof housing
6. Cable entry and conduit, certified by NEPSI with type of
protection Ex d IIC and appropriate thread form, should be
applied when installed in a hazardous location. Blanking
elements should be used on the redundant cable entries.
7. End users are not permitted to change any internal
components, but to settle the problem in conjunction with
the manufacturer to avoid damage to the product.
Voltage Ui
17.5 V
Current li
380 mA
Power Pi
5.32 W
8. Maintenance should be done in a non-hazardous location.
Capacitance Ci
0 μF
Inductance Li
0 mH
9. During installation, use and maintenance of this product,
observe the following standards: GB3836.13-1997,
GB3836.15-2000, GB3836.16-2006, GB50257-1996
www.rosemount.com
March 2015
I3
Rosemount DP Level
China Intrinsic Safety
Certificate: GYJ12.1295X; GYJ101320X [Flowmeters]
Standards: GB3836.1-2010, GB3836.4-2010,
GB3836.20-2010
Markings: Ex ia IIC T4 Ga
1. Symbol “X” is used to denote specific conditions of use:
a. If the apparatus is fitted with an optional 90V transient
suppressor, it is not capable of withstanding the 500V
insulation test for 1 minute. This must be taken into
account when installing the apparatus.
b. The enclosure may be made of aluminum alloy and
given a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion if
located in Zone 0.
2. The relation between T code and ambient temperature
range is:
Temperature
T Code
range
Model
HART, Fieldbus,
T4
Profibus, and Low Power
-60°C ≤ Ta ≤ +70°C
FISCO
T4
-60°C ≤ Ta ≤ +60°C
Flowmeter with 644
Temp Housing
T4
-40°C ≤ Ta ≤ +60°C
3. Intrinsically Safe parameters:
NOTE
[For Flowmeters] When 644 temperature transmitter is used, the 644
temperature transmitter should be used with Ex-certified associated
apparatus to establish explosion protection system that can be used
in explosive gas atmospheres. Wiring and terminals should comply
with the instruction manual of both 644 temperature transmitter and
associated apparatus. The cables between 644 temperatures
transmitter and associated apparatus should be shielded cables (the
cables must have insulated shield). The shielded cable has to be
grounded reliably in a non-hazardous area.
4. The product should be used with Ex-certified associated
apparatus to establish explosion protection system that
can be used in explosive gas atmospheres. Wiring and
terminals should comply with the instruction manual of
the product and associated apparatus.
5. The cables between this product and associated apparatus
should be shielded cables (the cables must have insulated
shield). The shielded cable has to be grounded reliably in a
non-hazardous area.
6. End users are not permitted to change any internal
components, and needs to settle the problem in
conjunction with the manufacturer to avoid damage to the
product.
7. During installation, use and maintenance of this product,
observe the following standards: GB3836.13-1997,
GB3836.15-2000, GB3836.16-2006, GB50257-1996
HART
Fieldbus/
PROFIBUS
FISCO
Japan
Voltage Ui
30 V
30 V
17.5 V
E4
Current li
200 mA
300 mA
380 mA
Power Pi
1W
1.3 W
5.32 W
Capacitance Ci
0.012 μF
0 μF
0 nF
Inductance Li
0 mH
0 mH
0 μF
NOTE
FISCO parameters comply with the requirements for FISCO field
devices in GB3836.19-2010
www.rosemount.com
Japan Flameproof
Certificate: TC20598, TC20599, TC20602, TC20603
[HART]; TC20600, TC20601, TC20604,
TC20605 [Fieldbus]
Markings: Ex d IIC T5
Combinations
K1
Combination of E1, I1, N1, and ND
K2
Combination of E2 and I2
K5
Combination of E5 and I5
K6
Combination of E6 and I6
K7
Combination of E7, I7, and N7
KB
Combination of K5 and K6
KD
Combination of K1, K5, and K6
153
Rosemount DP Level
March 2015
Additional Certifications
SBS American Bureau of Shipping (ABS) Type Approval
Certificate: 09-HS446883B-3-PDA
Intended Use: Marine & Offshore Applications
Measurement of either Gauge or Absolute
Pressure for Liquid, Gas, and Vapor.
ABS Rules: 2013 Steel Vessels Rules 1-1-4/7.7,
1-1-Appendix 3, 4-8-3/1.7, 4-8-3/13.1
SBV Bureau Veritas (BV) Type Approval
Certificate: 23157/A2 BV
BV Rules:
Bureau Veritas Rules for the Classification of
Steel Ships
Application: Class notations: AUT-UMS, AUT-CCS,
AUT-PORT and AUT-IMS; Pressure
transmitter type 2051 cannot be installed on
diesel engines
SDN Det Norske Veritas (DNV) Type Approval
Certificate: A-13245
Intended Use: Det Norske Veritas’ Rules for Classification of
Ships, High Speed & Light Craft Det Norske Veritas’
Offshore Standards
Application:
Locations classes
Type
2051
Temperature
D
Humidity
B
Vibration
A
EMC
B
Enclosure
D
SLL Lloyds Register (LR) Type Approval
Certificate: 11/60002
Application: Environmental categories ENV1, ENV2, ENV3
and ENV5
154
www.rosemount.com
March 2015
Rosemount DP Level
Dimensional Drawings
Figure 1. Rosemount 3051S ERS Measurement Transmitter
Rosemount 3051S ERS Measurement Transmitter - Coplanar style
Rosemount 3051S ERS Measurement Transmitter - In-Line style
5.21 (132)
4.55 (116)
4.20
(107)
3.45
(88)
8.04
(204)
Dimensions are in inches (millimeters).
www.rosemount.com
155
Rosemount DP Level
March 2015
Figure 2. Rosemount 3051S Scalable Level Transmitter with FF Seal
Rosemount 3051S Scalable Level Transmitter with FF(1)(2)- Coplanar style
5.17
(131)
4.51
(114)
8.57
(217,7)
+ Direct Mount
Extension Length
Rosemount 3051S Scalable Level Transmitter with FF(1)(2) - In-Line style
5.17
(131)
8.04
(204)
(1) FF (FFW) seal dimensions and pressure ratings can be found on page 167.
(2) Lower housing (flushing ring) is available with FFW style flange.
Dimensions are in inches (millimeters).
156
www.rosemount.com
March 2015
Rosemount DP Level
Figure 3. Rosemount 3051S Scalable Level Transmitter with Thermal Range Expander
Rosemount 3051S Scalable Level Transmitter with Thermal Range Expander – Coplanar style
4.20
(106, 7)
5.17
(131, 3)
8.36
(212, 3)
7.64
(194, 2)
Rosemount 3051S Scalable Level Transmitter with Thermal Range Expander – In-Line style
5.17
(131, 3)
4.20
(106, 7)
7.84
(199, 1)
13.51
(343, 2)
1.50
(38, 1)
www.rosemount.com
157
Rosemount DP Level
March 2015
Rosemount 3051S Scalable Level Transmitter with EF(1)- Coplanar style
5.21 (132)
4.20
(107)
4.55 (116)
8.55
(217)
3.62
(92)
+Direct
+ DirectMount
Mount
ExtensionLength
Length
Extension
Rosemount 3051S Scalable Level Transmitter with EF(1) - In-Line style
5.17
5.21
(131)
(132)
4.20
4.20
(107)
(107)
7.97
8.04
(202)
(204)
1.50
1.50
(38)
(38)
(1) EF (EFW) seal dimensions and pressure ratings can be found on page 173.
Dimensions are in inches (millimeters).
158
www.rosemount.com
March 2015
Rosemount DP Level
Figure 4. Rosemount 3051S Scalable Level Transmitter with RF Seal
Rosemount 3051S Scalable Level Transmitter with RF(1)- Coplanar style
5.21 (132)
4.20
(107)
4.55 (116)
8.55
(217)
3.62 (92)
+Direct Mount
+ Direct Mount
Extension
Length
Extension Length
Rosemount 3051S Scalable Level Transmitter with RF(1) - In-Line style
4.20
(107)
5.21 (132)
7.97
(202)
1.50 (38)
(1)
RF (RFW) seal dimensions and pressure ratings can be found on page 172.
Dimensions are in inches (millimeters).
www.rosemount.com
159
Rosemount DP Level
March 2015
Figure 5. Rosemount 3051S Scalable Level Transmitter with SS Seal
Rosemount 3051S Scalable Level Transmitter with SS(1)- Coplanar style
5.21 (132)
4.20
(107)
4.55 (116)
8.55
(217)
3.64 (92)
+Direct Mount
+ Direct Mount
Extension
Extension Length
Length
Rosemount 3051S Scalable Level Transmitter with SS(1) - In-Line style
4.20
(107)
5.21 (132)
7.97
(202)
1.50 (38)
(1) SS (SSW) seal dimensions and pressure ratings can be found on page 98.
Dimensions are in inches (millimeters).
160
www.rosemount.com
March 2015
Rosemount DP Level
Figure 6. Rosemount 3051S Scalable Level Transmitter with SC Seal
Rosemount 3051S Scalable Level Transmitter with SC(1)- Coplanar style
5.21 (132)
4.20
(107)
4.55 (116)
8.55
(217)
3.64 (92)
+Direct Mount
+ Direct Mount
Extension
Length
Extension Length
Rosemount 3051S Scalable Level Transmitter with SC(1) - In-Line style
4.20
(107)
5.21 (132)
7.97
(202)
1.50 (38)
(1) SC (SCW) seal dimensions and pressure ratings can be found on page 186.
Dimensions are in inches (millimeters).
www.rosemount.com
161
Rosemount DP Level
March 2015
Figure 6. Wireless Antenna on a Wireless PlantWeb Housing(1)(2) with FF Seal
AA
BB
6.93
(176)
90°
10.91
(277)
4.20
(107)
3.457
(87.8)
6.72
(171)
6.06
(155)
8.12
(206)
A. 900 mHZ Antenna
B. 2.4 GHz/WirelessHART Antenna
Dimensions are in inches (millimeters).
(1) Wireless 3051SAL_C transmitters require wireless transmitter output (option code X), the wireless PlantWeb housing (option codes 5A, 5B), an external antenna
,
option ( option codes WK, WM), as well as a SmartPower™ supply (option code 1).
(2) Antenna rotation and dimensions are equal for both Inline and Coplanar styles of transmitters.
162
www.rosemount.com
March 2015
Rosemount DP Level
Figure 7. Rosemount 3051L Level Transmitter with FF or EF Seal(1)
5.0 (127)
4.1
(105)
4.3 (109)
7.14
(181)
6.67
(169)
A
8.29
(211)
B
“A”
A. 2.4 or 6-in. Extension (only available with 3 and 4 inch flange configurations)
B. Flange Adapters (optional, differential configuration only)
Dimensions are in inches (millimeters).
(1) FF (FFW) and EF (EFW) seal and flange diameter dimensions can be viewed on page 167 and page 173.
Transmitter direct mount extension
Flange rating
Transmitter flange extension
Extension dimension (“A”)
ANSI/ASME B16.5 Class 600
All others
2-in.
0-in.
7.65 in. (194,3 mm)
5.65 in. (143,5 mm)
www.rosemount.com
163
Rosemount DP Level
March 2015
Figure 8. Rosemount 2051L Level Transmitter with FF or EF Seal(1)
5.00 (127)
4.36 (110, 7)
3.85 (97, 8)
A
6.60
(167, 7)
7.02
(178, 2)
8.12
(206, 2)
B
A. 2.4 or 6-in. Extension (only available wit 3 and 4 inch flange configurations)
B. Flange Adapters (optional, differential configuration only)
Dimensions are in inches (millimeters)
(1) FF (FFW) and EF (EFW) seal and flange diameter dimensions can be viewed on page 167 and page 173.
164
www.rosemount.com
March 2015
Rosemount DP Level
Figure 9. Tuned-System Assembly
Tuned System Assembly(1)(2) shown with Rosemount 3051S Scalable Level Transmitter
5.21 (132)
4.20
(107)
4.55 (116)
(116)
7.70
(196)
8.55
(217)
Rosemount 1199 Remote Seal System Assembly shown with Rosemount 3051S Scalable Transmitter
4.55
(116)
(116)
4.20
(107)
7.70
(196)
8.55
(217)
2.5
(63.5)
A
B
A
B
A. Capillary Connection Only
B. Capillary Connects to 1199 Remote Seals
Dimensions are in inches (millimeters)
(1) Tuned System Assemblies require specification of capillary length and addition 1199 Remote Seal.
(2) Tuned System Assemblies are available on all Level Transmitters.
www.rosemount.com
165
Rosemount DP Level
March 2015
Figure 10. Thermal Optimizer (D5) with FFW
4.55
4.20
(107)
(116)
(116)
7.97
(202)
5.72
(145)
Dimensions are in inches (millimeters).
166
www.rosemount.com
March 2015
Rosemount DP Level
Figure 11. FFW Flush Flanged Seal - Two-Piece Design (Shown with Flushing Ring)
D
A
B
E
C
F
A. Process flange
B. Diaphragm
C. Flushing connection
Dimensions are in inches (millimeters).
D. Connection to transmitter
E. Diaphragm
F. Flushing ring
Table 22. Dimensional Table for FFW Flush Flanged Raised Face Seals Two Piece (Upper Housing and Flange)
Design
Pipe size
ANSI/ ASME
2-in.
3-in.
4-in.
EN1092-1
DN 50
DN 80
DN 100
Class
Flange
Flange
diameter
thickness
“A” in. (mm.) “B” in. (mm.)
Bolt
circle
“C” in.
(mm.)
# of bolts
Bolt hole
diameter
“D” in.
(mm.)
Standard
Raised face
diaphragm
outer
diameter
diameter
“F” in. (mm.) “G” in. (mm.)
150 lb.
6.00 (152)
0.69 (18)
4.75 (121)
4
0.75 (19)
2.30 (58)
3.62 (92)
300 lb.
6.50 (165)
0.81 (21)
5.00 (127)
8
0.75 (19)
2.30 (58)
3.62 (92)
600 lb.
6.50 (165)
1.00 (25)
5.00 (127)
8
0.75 (19)
2.30 (58)
3.62 (92)
150 lb.
7.50 (191)
0.88 (22)
6.00 (152)
4
0.75 (19)
3.50 (89)
5.00 (127)
300 lb.
8.25 (210)
1.06 (27)
6.62 (168)
8
0.88 (22)
3.50 (89)
5.00 (127)
600 lb.
8.25 (210)
1.25 (32)
6.62 (168)
8
0.88 (22)
3.50 (89)
5.00 (127)
150 lb.
9.00 (229)
0.88 (22)
7.50 (191)
8
0.75 (19)
3.50 (89)
6.20 (157)
300 lb.
10.0 (254)
1.19 (30)
7.88 (200)
8
0.88 (22)
3.50 (89)
6.20 (157)
600 lb.
10.75 (273)
1.50 (38)
8.50 (216)
8
1.00 (25)
3.50 (89)
6.20 (157)
PN 40
6.50 (165)
0.79 (20)
4.92 (125)
4
0.71 (18)
2.30 (58)
4.00 (102)
PN 63
7.09 (180)
1.02 (26)
5.31 (135)
4
0.87 (22)
2.30 (58)
4.00 (102)
PN 100
7.68 (195)
1.10 (28)
5.71 (145)
4
1.02 (26)
2.30 (58)
4.00 (102)
PN 40
7.87 (200)
0.94 (24)
6.30 (160)
8
0.71 (18)
3.50 (89)
5.43 (138)
PN 63
8.46 (215)
1.10 (28)
6.69 (170)
8
0.88 (22)
3.50 (89)
5.43 (138)
PN 100
9.06 (230)
1.26 (32)
7.09 (180)
8
1.02 (26)
3.50 (89)
5.43 (138)
PN 16
8.66 (220)
0.79 (20)
7.09 (180)
8
0.71 (18)
3.50 (89)
6.20 (157)
PN 40
9.25 (235)
0.94 (24)
7.48 (190)
8
0.87 (22)
3.50 (89)
6.20 (157)
PN 63
9.84 (250)
1.18 (30)
7.87 (200)
8
1.02 (26)
3.50 (89)
6.20 (157)
www.rosemount.com
167
Rosemount DP Level
March 2015
Table 22. Dimensional Table for FFW Flush Flanged Raised Face Seals Two Piece (Upper Housing and Flange)
Design
Pipe size
JIS
50A
80A
100A
Class
Flange
Flange
diameter
thickness
“A” in. (mm.) “B” in. (mm.)
Bolt
circle
“C” in.
(mm.)
# of bolts
Bolt hole
diameter
“D” in.
(mm.)
Standard
Raised face
diaphragm
outer
diameter
diameter
“F” in. (mm.) “G” in. (mm.)
10K
6.10 (155)
0.63 (16)
4.72 (120)
4
0.75 (19)
2.30 (58)
20K
6.10 (155)
0.71 (18)
4.72 (120)
8
0.75 (19)
2.30 (58)
3.62 (92)
3.62 (92)
40K
6.50 (165)
1.02 (26)
5.12 (130)
8
0.75 (19)
2.30 (58)
4.00 (102)
10K
7.28 (185)
0.71 (18)
5.91 (150)
8
0.75 (19)
3.50 (89)
5.00 (127)
20K
7.87 (200)
0.87 (22)
6.30 (160)
8
0.91 (23)
3.50 (89)
5.00 (127)
40K
8.27 (210)
1.26 (32)
6.69 (170)
8
0.91 (23)
3.50 (89)
5.43 (138)
10K
8.27 (210)
0.71 (18)
6.89 (175)
8
0.75 (19)
3.50 (89)
6.20 (157)
20K
8.86 (225)
0.95 (24)
7.28 (185)
8
0.91 (23)
3.50 (89)
6.20 (157)
40K
9.84 (250)
1.42 (36)
8.07 (205)
8
0.98 (25)
3.50 (89)
6.20 (157)
Table 23. Dimensional Table for FFW Flush Flanged Raised Face Seals Two Piece (Upper Housing and Flange)
Design
Pipe size
ANSI / ASME
2-in.
3-in.
4-in.
EN1092-1
DN 50
DN 80
DN 100
JIS
50A
80A
100A
168
Inner diameter
“K” in. (mm.)
Beveled edge
“L” in. (mm.)
2.12 (54)
2.12 (54)
Thickness with
Thickness with
1/4-NPT F.C. “M” 1/2-NPT F.C. “M” in.
Minimum gasket
I.D. “N” in. (mm.)
Weight lbs.
(kg.)
7.40 (3.33)
in. (mm.)
(mm.)
2.48 (63)
0.97 (25)
1.30 (33)
2.62 (67)
2.48 (63)
0.97 (25)
1.30 (33)
2.62 (67)
8.99 (4.05)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
2.62 (67)
10.44 (4.70)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
13.79 (6.21)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
17.84 (8.03)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
20.31 (9.14)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
19.56 (8.80)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
29.56 (13.30)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
40.73 (18.33)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
9.02 (4.06)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
12.58 (5.66)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
15.23 (6.85)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
15.03 (6.76)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
18.87 (8.49)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
23.34 (10.50)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
16.08 (7.24)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
20.31 (9.14)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
26.74 (12.03)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
2.62 (67)
6.93 (3.15)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
2.62 (67)
7.11 (3.20)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
10.41 (4.68)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
10.52 (4.73)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
13.61 (6.12)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
20.08 (9.04)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
14.03 (6.31)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
19.16 (8.62)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
4.50 (113)
32.12 (14.45)
www.rosemount.com
March 2015
Rosemount DP Level
Figure 12. FFW Flush Flanged Seal - One-Piece Design (Shown with flushing ring)
D
A
B
E
C
F
봀
D. Connection to transmitter
E. Diaphragm
F. Flushing ring
A. Process flange
B. Diaphragm
C. Flushing connection
Dimensions are in inches (millimeters).
Table 24. Dimensional Table for FFW Flush Flanged Seals One Piece (Upper Housing and Flange) Design (Option
code E)
Standard
Raised Raised
Flange
Flange
Bolt
Bolt hole
Minimum
diaphragm
face
face
diameter thickness circle # of diameter
gasket I.D. Weight
diameter diameter height
lbs. (kg.)
“A” in.
“B” in. “C” in. bolts “D” in.
“N” in.
“F” in.
“G” in.
“J” in.
(mm.)
(mm.) (mm.)
(mm.)
(mm.)
(mm.)
(mm.)
(mm.)
Pipe size Class
ANSI / ASME
2-in.
3-in.
4-in.
150 lb.
6.00 (152)
0.69 (18)
4.75
(121)
4
0.75 (19)
2.30 (58)
3.62 (92)
0.06
(1.5)
2.62 (67)
5.82
(2.62)
300 lb.
6.50 (165)
0.81 (21)
5.00
(127)
8
0.75 (19)
2.30 (58)
3.62 (92)
0.06
(1.5)
2.62 (67)
7.53
(3.39)
600 lb.
6.50 (165)
1.00 (25)
5.00
(127)
8
0.75 (19)
2.30 (58)
3.62 (92)
0.25
(6.4)
2.62 (67)
9.72
(4.37)
150 lb.
7.50 (191)
0.88 (22)
6.00
(152)
4
0.75 (19)
3.50 (89)
5.00 (127)
0.06
(1.5)
3.82 (97)
11.70
(5.27)
300 lb.
8.25 (210)
1.06 (27)
6.62
(168)
8
0.88 (22)
3.50 (89)
5.00 (127)
0.06
(1.5)
3.82 (97)
15.92
(7.16)
600 lb.
8.25 (210)
1.25 (32)
6.62
(168)
8
0.88 (22)
3.50 (89)
5.00 (127)
0.25
(6.4)
3.82 (97)
19.67
(8.85)
150 lb.
9.00 (229)
0.88 (22)
7.50
(191)
8
0.75 (19)
3.50 (89)
6.20 (157)
0.06
(1.5)
4.50 (114)
16.68
(7.51)
300 lb.
10.00 (254)
1.19 (30)
7.88
(200)
8
0.88 (22)
3.50 (89)
6.20 (157)
0.06
(1.5)
4.50 (114)
26.99
(12.15)
600 lb.
10.75 (273)
1.50 (38)
8.50
(216)
8
1.00 (25)
3.50 (89)
6.20 (157)
0.25
(6.4)
4.50 (114)
40.10
(18.05)
www.rosemount.com
169
Rosemount DP Level
March 2015
Figure 13. FFW Flush Flanged Seal - Flushing Connection Ring (Lower Housing)
M
K
L
G
Table 25. Dimensional Table for FFW Flushing Connection Ring (Lower Housing)
Pipe size
ANSI / ASME
2-in.
3-in.
4-in.
EN1092-1
DN 50
DN 80
DN 100
JIS
50A
80A
100A
170
Class
Raised face
diameter “G”
in. (mm.)
Beveled
Thickness with Thickness with
Inner diameter
Weight lbs.
edge “L” in. 1/4–NPT F.C. “M” 1/2–NPT F.C. “M”
“K” in. (mm.)
(kg.)
(mm.)
in. (mm.)
in. (mm.)
150 lb.
3.62 (92)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
1.85 (0.83)
300 lb.
3.62 (92)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
1.85 (0.83)
600 lb.
3.62 (92)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
1.85 (0.83)
150 lb.
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.63 (1.18)
300 lb.
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.63 (1.18)
600 lb.
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.63 (1.18)
150 lb.
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
300 lb.
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
600 lb.
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
PN 40
4.00 (102)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.24 (1.01)
PN 63
4.00 (102)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.24 (1.01)
PN 100
4.00 (102)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.24 (1.01)
PN 40
5.43 (138)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.62 (1.63)
PN 63
5.43 (138)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.62 (1.63)
PN 100
5.43 (138)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.62 (1.63)
PN 16
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
PN 40
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
PN 63
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
10K
3.62 (92)
2.12 (54)
N/A
0.97 (25)
1.30 (33)
1.85 (0.83)
20K
3.62 (92)
2.12 (54)
N/A
0.97 (25)
1.30 (33)
1.85 (0.83)
40K
3.62 (92)
2.12 (54)
N/A
0.97 (25)
1.30 (33)
1.85 (0.83)
10K
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.63 (1.18)
20K
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.63 (1.18)
40K
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.63 (1.18)
10K
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
20K
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
40K
6.20 (157)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
5.60 (2.52)
www.rosemount.com
March 2015
Rosemount DP Level
Figure 14. RFW Flanged Seal Standard Design
A
D
B
C
E
A. Process flange
B. Diaphragm
C. Lower housing or flushing connection
D. Connection to transmitter
E. Diaphragm
Dimensions are in inches (millimeters).
Table 26. RFW Flanged Seal Standard Design Dimensions(1)
Class
Flange
thickness
“B” in.
(mm.)
/2-in.
2500 lb.
5.25 (133)
1.19 (30)
2.45 (62)
3/4-in.
300/600 lb.
4.62 (117)
0.62 (16)
150 lb.
4.25 (108)
0.50 (13)
300 lb.
4.88 (124)
600 lb.
4.88 (124)
150 lb.
Pipe
size
ANSI / ASME
1
1-in.
11/2-in.
EN 1092-1
Overall height “C” in.
(mm.)
Flange
diameter
“A” in.
(mm.)
Lower
housing
Weight lbs.
diameter
(kg.)
“F” in.
(mm.)
Bolt circle
diameter
“D” in.
(mm.)
Bolt hole
diameter
“E” in.
(mm.)
2.79 (71)
3.50 (89)
0.88 (22)
2.62 (67)
8.49 (3.82)
2.45 (62)
2.79 (71)
3.25 (83)
0.75 (19)
2.62 (67)
4.99 (2.25)
2.45 (62)
2.79 (71)
3.12 (79)
0.63 (16)
2.62 (67)
4.19 (1.89)
0.62 (16)
2.45 (62)
2.79 (71)
3.50 (89)
0.75 (19)
2.62 (67)
5.30 (2.39)
0.69 (18)
2.45 (62)
2.79 (71)
3.50 (89)
0.75 (19)
2.62 (67)
5.58 (2.51)
5.00 (127)
0.62 (16)
2.45 (62)
2.79 (71)
3.88 (99)
0.63 (16)
2.88 (73)
5.63 (2.53)
300 lb.
6.12 (155)
0.75 (19)
2.45 (62)
2.79 (71)
4.50 (114)
0.88 (22)
2.88 (73)
8.20 (3.69)
No or 1/4-in. 1/2-in. NPT
NPT flush
flush
connection connection
600 lb.
6.12 (155)
0.88 (22)
2.45 (62)
2.79 (71)
4.50 (114)
0.88 (22)
2.88 (73)
9.09 (4.09)
DN 25
PN 40
4.53 (115)
0.71 (18)
2.45 (62)
2.79 (71)
3.35 (85)
0.55 (14)
2.68 (68)
5.09 (2.29)
DN 40
PN 40
5.91 (150)
0.71 (18)
2.45 (62)
2.79 (71)
4.33 (110)
0.71 (18)
3.47 (88)
8.04 (3.62)
20A
40K
4.72 (120)
0.79 (20)
2.45 (62)
2.79 (71)
3.35 (85)
0.75 (19)
2.62 (67)
5.59 (2.52)
10K
4.92 (125)
0.55 (14)
2.45 (62)
2.79 (71)
3.54 (90)
0.75 (19)
2.62 (67)
5.00 (2.25)
20K
4.92 (125)
0.63 (16)
2.45 (62)
2.79 (71)
3.54 (90)
0.75 (19)
2.62 (67)
5.31 (2.39)
40K
5.12 (130)
0.87 (22)
2.45 (62)
2.79 (71)
3.74 (95)
0.75 (19)
2.76 (70)
6.86 (3.09)
10K
5.51 (140)
0.63 (16)
2.45 (62)
2.79 (71)
4.13 (105)
0.75 (19)
3.19 (81)
6.20 (2.79)
20K
5.51 (140)
0.71 (18)
2.45 (62)
2.79 (71)
4.13 (105)
0.75 (19)
3.19 (81)
7.36 (3.31)
40K
6.30 (160)
0.94 (24)
2.45 (62)
2.79 (71)
4.72 (120)
0.91 (23)
3.54 (90)
11.06 (4.98)
JIS
25A
40A
(1) Lower housing is loose on standard design, consult factory for retained lower housing options.
www.rosemount.com
171
Rosemount DP Level
March 2015
Figure 15. RFW Flanged Seal Stud Bolt Design
E
A
B
C
D
F
E. Connection to transmitter
F. Diaphragm
Dimensions are in inches (millimeters).
A. Upper housing
B. Diaphragm
C. Lower housing or Flushing Connection
D. Bolts
Table 27. RF/RFW Flanged Seal Standard Design Dimensions(1)
Overall height “A” in.
(mm.)
Pipe size
Class
No or 1/4-in.
1/2-in. NPT
EN 1092-1 ANSI / ASME
NPT flush
flush
connection connection
Lower
housing
diameter
“D” in.
(mm.)
Raised face
diameter Weight lbs.
(kg.)
“E” in.
(mm.)
150 lb.
300/600 lb.
2.52 (64)
2.77 (70)
2.82 (72)
2.87 (73)
2.38 (61)
2.62 (67)
1/2-13NC, 2.5-in.
1
3.74 (95)
3.75 (95)
1.38 (35)
1.38 (35)
6.28 (2.83)
6.53 (2.94)
/4-in.
150 lb.
2.52 (64)
2.82 (72)
2.75 (70)
1
/2-13NC, 2.5-in.
3.88 (99)
1.69 (43)
6.46 (2.91)
DN 15
PN 40
PN 100/160
2.52 (64)
2.52 (64)
2.82 (72)
2.82 (72)
2.56 (65)
2.95 (75)
M12x1.75, 60mm
M12x1.75, 60mm
3.74 (95)
4.13 (105)
1.77 (45)
1.77 (45)
6.27 (2.82)
6.92 (3.11)
DN 20
PN 40
2.52 (64)
2.82 (72)
2.95 (75)
M12x1.75, 60mm
4.13 (105)
2.28 (58)
6.90 (3.11)
10/20K
40K
10K
20K
40K
10/20K
2.52 (64)
2.52 (64)
2.52 (64)
2.52 (64)
2.52 (64)
2.52 (64)
2.82 (72)
2.82 (72)
2.82 (72)
2.82 (72)
2.82 (72)
2.82 (72)
2.56 (65)
2.95 (75)
2.76 (70)
2.76 (70)
3.15 (80)
2.95 (75)
M12x1.75,60mm
M16x2.00,70mm
M12x1.75,60mm
M12x2.00,60mm
M16x2.00,70mm
M12x1.75,60mm
3.74 (95)
4.33 (110)
3.74 (95)
3.74 (95)
4.53 (115)
3.94 (100)
1.81 (46)
2.05 (52)
2.01 (51)
2.01 (51)
2.17 (55)
2.21 (56)
6.30 (2.84)
7.70 (3.47)
6.39 (2.88)
6.39 (2.88)
8.26 (3.72)
6.68 (3.01)
1/2-in.
3
10A
JIS
Stud circle
diameter Stud (size, length)
“C” in. (mm.)
“B” in.
(mm.)
15A
20A
/2-13NC, 2.5-in.
(1) Lower housing is loose on standard design, consult factory for retained lower housing options.
172
www.rosemount.com
March 2015
Rosemount DP Level
Figure 16. EFW Extended Flanged Seal - Extended Flanged Assembly
A
D
B
E
C
F
D. Connection to transmitter
E. Extension length
F. Diaphragm
A. Process flange
B. Extension
C. Diaphragm
Dimensions are in inches (millimeters).
Table 28. EFW Extended Flanged Seal Dimensions
Pipe size
ANSI / ASME
11/2-in.
2-in.
3-in.
4-in.
EN 1092-1
DN 50
DN 80
DN 100
Class
Flange diameter
“A” in. (mm.)
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
PN 40
PN 63
PN 100
PN 40
PN 63
PN 100
PN 16
PN 40
PN 63
5.00 (127)
6.12 (156)
6.12 (156)
6.00 (152)
6.50 (165)
6.50 (165)
7.50 (191)
8.25 (210)
8.25 (210)
9.00 (229)
10.00 (254)
10.75 (273)
6.50 (165)
7.08 (180)
7.68 (195)
7.87 (200)
8.46 (215)
9.06 (230)
8.66 (220)
9.25 (235)
9.84 (250)
www.rosemount.com
Bolt hole
Raised face
Flange thickness Bolt circle “C” in.
# of bolts diameter “D” diameter “F” in.
“B” in. (mm.)
(mm.)
in. (mm.)
(mm.)
0.62 (16)
0.75 (19)
0.88 (22)
0.69 (18)
0.82 (21)
1.00 (25)
0.88 (22)
1.06 (27)
1.25 (32)
0.88 (22)
1.19 (30)
1.50 (38)
0.79 (20)
1.02 (26)
1.10 (28)
0.94 (24)
1.10 (28)
1.26 (32)
0.79 (20)
0.94 (24)
1.18 (30)
3.88 (99)
4.50 (114)
4.50 (114)
4.75 (121)
5.00 (127)
5.00 (127)
6.00 (152)
6.62 (168)
6.62 (168)
7.50 (191)
7.88 (200)
8.50 (216)
4.92 (125)
5.31 (135)
5.71 (145)
6.30 (160)
6.69 (170)
7.09 (180)
7.09 (180)
7.48 (190)
7.87 (200)
4
4
4
4
8
8
4
8
8
8
8
8
4
4
4
8
8
8
8
8
8
0.63 (16)
0.88 (22)
0.88 (22)
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0.88 (22)
0.88 (22)
0.75 (19)
0.88 (22)
1.00 (25)
0.71 (18)
0.87 (22)
1.02 (26)
0.71 (18)
0.88 (22)
1.02 (26)
0.71 (18)
0.87 (22)
1.02 (26)
2.88 (73)
2.88 (73)
2.88 (73)
3.62 (92)
3.62 (92)
3.62 (92)
5.00 (127)
5.00 (127)
5.00 (127)
6.20 (158)
6.20 (158)
6.20 (158)
4.02 (102)
4.02 (102)
4.02 (102)
5.43 (138)
5.43 (138)
5.43 (138)
6.20 (158)
6.20 (158)
6.20 (158)
173
Rosemount DP Level
March 2015
Table 28. EFW Extended Flanged Seal Dimensions
Pipe size
JIS
50A
80A
100A
Class
Flange diameter
“A” in. (mm.)
10K
20K
40K
10K
20K
40K
10K
20K
40K
6.10 (155)
6.10 (155)
6.50 (165)
7.28 (185)
7.87 (200)
8.27 (210)
8.27 (210)
8.86 (225)
9.84 (250)
Bolt hole
Raised face
Flange thickness Bolt circle “C” in.
# of bolts diameter “D” diameter “F” in.
“B” in. (mm.)
(mm.)
in. (mm.)
(mm.)
0.63 (16)
0.71 (18)
1.02 (26)
0.71 (18)
0.87 (22)
1.26 (32)
0.71 (18)
0.94 (24)
1.42 (36)
4.72 (120)
4.72 (120)
5.12 (130)
5.91 (150)
6.30 (160)
6.69 (170)
6.89 (175)
7.28 (185)
8.07 (205)
4
8
8
8
8
8
8
8
8
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0.91 (23)
0.91 (23)
0.75 (19)
0.91 (23)
0.98 (25)
3.62 (92)
3.62 (92)
4.00 (102)
5.00 (127)
5.00 (127)
5.43 (138)
6.20 (158)
6.20 (158)
6.20 (158)
Table 29. EFW Extended Flanged Seal Dimensions
Process connection size
ANSI B16.5
EN 1092-1
JIS B2238
Diameter “E”
in. (mm.)
3-in.
4-in.
1 ½-in.
2-in.
3-in. Headbox
4-in. Headbox
DN 80
DN 100
DN 40
DN 50
DN 80 Headbox
DN100 Headbox
80A
100A
40A
50A
N/A
N/A
2.58 (66)
3.50 (89)
1.45 (37)
1.90 (48)
2.88 (73)
3.78 (96)
174
www.rosemount.com
March 2015
Rosemount DP Level
Table 30. EFW Extended Flanged Seal Weights pounds (kilograms)
Extension length
Pipe size
1 1/2-in.
2-in.
ANSI / ASME
3-in.
3-in.
Headbox
4-in.
4-in.
Headbox
Class
1-in.
2-in.
3-in.
4-in.
5-in.
6-in.
7-in.
8-in.
9-in.
(25 mm.) (51 mm.) (76 mm.) (102 mm.) (127 mm.) (152 mm.) (178 mm.) (203 mm.) (229 mm.)
150 lb.
5.53
(2.49)
5.99
(2.70)
6.46
(2.91)
6.92
(3.11)
7.38
(3.32)
7.85
(3.53)
8.31
(3.74)
8.78
(3.95)
7.47
(3.36)
300 lb.
8.11
(3.65)
8.57
(3.86)
9.04
(4.07)
9.50
(4.28)
9.96
(4.48)
10.43
(4.69)
10.89
(4.90)
11.36
(5.11)
10.05
(4.52)
600 lb.
9.00
(4.05)
9.46
(4.56)
9.93
(4.47)
10.39
(4.68)
10.86
(4.89)
11.32
(5.09)
11.78
(5.30)
12.25
(5.51)
10.94
(4.92)
150 lb.
8.22
(3.70)
8.80
(3.96)
9.41
(4.23)
10.00
(4.50)
10.60
(4.77)
11.19
(5.04)
11.79
(5.31)
12.38
(5.57)
11.16
(5.02)
300 lb.
9.81
(4.41)
10.39
(4.68)
11.00
(4.95)
11.60
(5.22)
12.19
(5.49)
12.79
(5.76)
13.38
(6.02)
13.98
(6.29)
12.75
(5.74)
600 lb.
11.26
(5.07)
11.84
(5.33)
12.44
(5.60)
13.05
(5.87)
13.64
(6.14)
14.23
(6.40)
14.83
(6.67)
15.42
(6.94)
14.20
(6.39)
150 lb.
15.89
(7.15)
17.64
(7.94)
19.48
(8.77)
21.27
(9.57)
23.08
(10.39)
24.88
(11.20)
26.69
(12.01)
28.50
(12.83)
22.47
(10.11)
300 lb.
19.94
(8.97)
21.69
(9.76)
23.53
(10.59)
25.32
(11.39)
27.13
(12.21)
28.93
(13.02)
30.74
(13.83)
32.54
(14.64)
26.52
(11.93)
600 lb.
22.43
(10.09)
24.18
(10.88)
26.02
(11.71)
27.81
(12.51)
29.62
(13.33)
31.42
(14.14)
33.23
(14.95)
35.03
(15.76)
29.01
(13.05)
150 lb.
15.76
(7.09)
17.40
(7.83)
19.07
(8.58)
20.90
(9.41)
22.40
(10.08)
24.07
(10.83)
25.74
(11.58)
27.41
(12.33)
23.24
(10.46)
300 lb.
19.81
(8.91)
21.45
(9.65)
23.12
(10.40)
24.95
(11.23)
26.45
(11.90)
28.12
(12.65)
29.79
(13.41)
31.45
(14.15)
27.29
(12.28)
600 lb.
22.30
(10.04)
23.94
(10.77)
25.61
(11.52)
27.44
(12.35)
28.94
(13.02)
30.61
(13.77)
32.28
(14.53)
33.94
(15.27)
29.78
(13.40)
150 lb.
28.61
(12.87)
39.17
(17.63)
49.62
(22.33)
60.07
(27.03)
70.52
(31.73)
80.94
(36.42)
91.42
(41.14)
101.88
(45.85)
31.74
(14.28)
300 lb.
38.62
(17.38)
49.18
(22.13)
59.63
(26.83)
70.08
(31.54)
80.54
(36.24)
90.96
(40.93)
101.44
(45.65)
111.89
(50.35)
41.75
(18.79)
600 lb.
48.37
(21.77)
58.93
(26.52)
69.38
(31.22)
79.83
(35.92)
90.28
(40.63)
100.70
(45.32)
111.19
(50.04)
121.64
(54.74)
51.50
(23.18)
150 lb.
22.84
(10.28)
25.85
(11.63)
28.90
(13.01)
31.99
(14.40)
35.00
(15.75)
38.06
(17.13)
41.11
(18.50)
44.13
(19.86)
32.00
(14.40)
300 lb.
32.85
(14.78)
35.87
(16.14)
38.92
(17.51)
42.00
(18.90)
45.02
(20.26)
48.07
(21.63)
51.12
(23.00)
54.14
(24.36)
42.02
(18.91)
600 lb.
42.60
(19.17)
45.62
(20.53)
48.67
(21.90)
51.75
(23.29)
54.77
(24.65)
57.82
(26.02)
60.87
(27.39)
63.89
(28.75)
51.77
(23.30)
www.rosemount.com
175
Rosemount DP Level
March 2015
Table 30. EFW Extended Flanged Seal Weights pounds (kilograms)
Extension length
Pipe size
DN 50
Schedule
40
EN 1092 - 1
DN
80
Schedule
80
Headbox
Schedule
40
DN
100
Schedule
80
Headbox
176
Class
1-in.
2-in.
3-in.
4-in.
5-in.
6-in.
7-in.
8-in.
9-in.
(25 mm.) (51 mm.) (76 mm.) (102 mm.) (127 mm.) (152 mm.) (178 mm.) (203 mm.) (229 mm.)
PN 40
9.87
(4.44)
10.45
(4.70)
11.06
(5.00)
11.66
(5.25)
12.25
(5.51)
12.84
(5.78)
13.44
(6.05)
14.03
(6.31)
12.81
(5.76)
PN 63
13.37
(6.02)
13.96
(6.28)
14.56
(6.55)
15.16
(6.82)
15.75
(7.09)
16.35
(7.36)
16.94
(7.62)
17.54
(7.89)
16.31
(7.34)
PN 100
16.05
(7.22)
16.63
(7.48)
17.23
(7.75)
17.83
(8.02)
18.43
(8.29)
19.02
(8.56)
19.61
(8.82)
20.21
(9.09)
18.99
(8.55)
PN 40
16.85
(7.58)
18.47
(8.31)
20.08
(9.04)
21.70
(9.77)
23.32
(10.49)
24.94
(11.22)
26.56
(11.95)
28.18
(12.68)
23.97
(10.79)
PN 63
20.70
(9.32)
22.32
(10.04)
23.93
(10.77)
25.55
(11.50)
27.17
(12.23)
28.79
(12.96)
30.41
(13.68)
32.03
(14.41)
27.82
(12.52)
PN 100
25.29
(11.38)
26.90
(12.11)
28.51
(12.83)
30.13
(13.56)
31.75
(14.29)
33.37
(15.02)
34.99
(15.75)
36.61
(16.47)
32.40
(14.58)
PN 40
16.53
(7.44)
17.76
(7.99)
19.07
(8.58)
20.36
(9.16)
21.65
(9.74)
22.93
(10.32)
24.22
(10.90)
25.51
(11.48)
21.12
(9.50)
PN 63
20.38
(9.17)
21.61
(9.72)
22.92
(10.31)
24.21
(10.89)
25.50
(11.48)
26.78
(12.05)
28.07
(12.63)
29.36
(13.21)
24.97
(11.24)
PN 100
24.97
(11.24)
26.20
(11.79)
27.51
(12.38)
28.79
(12.96)
30.08
(13.54)
31.37
(14.12)
32.65
(14.69)
33.94
(15.27)
29.56
(13.30)
PN 40
16.92
(7.61)
18.56
(8.35)
20.23
(9.10)
22.06
(9.93)
23.56
(10.60)
25.23
(11.35)
26.90
(12.11)
28.56
(12.85)
24.40
(10.98)
PN 63
20.77
(9.35)
22.41
(10.08)
24.08
(10.84)
25.91
(11.66)
27.41
(12.33)
29.08
(13.09)
30.75
(13.84)
32.41
(14.58)
28.25
(12.71)
PN 100
25.35
(11.41)
26.99
(12.15)
28.66
(12.90)
30.49
(13.72)
31.99
(14.40)
33.66
(15.15)
35.33
(15.90)
37.00
(16.65)
32.84
(14.78)
PN 16
19.23
(8.65)
22.07
(9.93)
24.95
(11.23)
27.85
(12.53)
30.73
(13.83)
33.62
(15.13)
36.50
(16.43)
39.39
(17.73)
29.81
(13.41)
PN 40
23.32
(10.50)
26.16
(11.77)
29.05
(13.07)
31.94
(14.37)
34.83
(15.67)
37.71
(16.97)
40.60
(18.27)
43.48
(19.57)
33.90
(15.26)
PN 63
29.83
(13.42)
32.67
(14.70)
35.56
(16.00)
38.45
(17.30)
41.34
(18.60)
44.22
(19.90)
47.11
(21.20)
50.00
(22.50)
40.41
(18.18)
PN 16
18.85
(8.48)
21.43
(9.64)
23.98
(10.79)
26.53
(11.94)
29.08
(13.09)
31.66
(14.25)
34.17
(15.38)
36.72
(16.52)
26.81
(12.06)
PN 40
22.95
(10.33)
25.53
(11.49)
28.07
(12.63)
30.62
(13.78)
33.17
(14.93)
35.75
(16.09)
38.27
(17.22)
40.82
(18.37)
30.90
(13.91)
PN 63
29.46
(13.26)
32.04
(14.42)
34.58
(15.56)
37.13
(16.71)
39.68
(17.86)
42.26
(19.02)
44.78
(20.15)
47.33
(21.30)
37.41
(16.83)
PN 16
19.38
(8.72)
22.40
(10.08)
25.45
(11.45)
28.53
(12.84)
31.55
(14.20)
34.60
(15.57)
37.65
(16.94)
40.67
(18.30)
28.55
(12.85)
PN 40
23.48
(10.57)
26.49
(11.92)
29.54
(13.29)
32.63
(14.68)
35.65
(16.04)
38.70
(17.42)
41.75
(18.79)
44.77
(20.15)
32.64
(14.69)
PN 63
29.99
(13.50)
33.00
(14.85)
36.05
(16.22)
39.14
(17.61)
42.16
(18.97)
45.21
(20.34)
48.26
(21.72)
51.28
(23.08)
39.15
(17.62)
www.rosemount.com
March 2015
Rosemount DP Level
Table 30. EFW Extended Flanged Seal Weights pounds (kilograms)
Extension length
Pipe size
Class
50A
Schedule
40
10K
7.73
(3.48)
8.31
(3.74)
8.91
(4.01)
9.51
(4.28)
10.11
(4.55)
10.70
(4.82)
11.30
(5.08)
11.89
(5.35)
10.67
(4.80)
20K
7.91
(3.56)
8.49
(3.82)
9.10
(4.10)
9.70
(4.37)
10.29
(4.63)
10.89
(4.90)
11.48
(5.17)
12.07
(5.43)
10.85
(4.88)
40K
11.18
(5.03)
11.76
(5.29)
12.37
(5.57)
13.00
(5.85)
13.56
(6.10)
14.16
(6.37)
14.75
(6.64)
15.35
(6.91)
14.12
(6.35)
10K
12.41
(5.58)
14.02
(6.31)
15.63
(7.03)
17.25
(7.76)
18.87
(8.49)
20.49
(9.22)
22.11
(9.95)
23.73
(10.68)
19.52
(8.78)
20K
15.51
(6.98)
17.12
(7.70)
18.73
(8.43)
20.35
(9.16)
21.97
(9.89)
23.59
(10.62)
25.21
(11.34)
26.83
(12.07)
22.62
(10.18)
40K
21.92
(9.86)
23.53
(10.59)
25.15
(11.32)
26.77
(12.05)
28.39
(12.78)
30.00
(13.50)
31.62
(14.23)
33.24
(14.96)
29.04
(13.07)
10K
12.09
(5.44)
13.32
(5.99)
14.63
(6.58)
15.91
(7.16)
17.20
(7.74)
18.49
(8.32)
19.78
(8.90)
21.06
(9.48)
16.68
(7.51)
20K
15.19
(6.84)
16.42
(7.39)
17.73
(7.98)
19.01
(8.55)
20.30
(9.14)
21.59
(9.72)
22.88
(10.30)
24.16
(10.87)
19.78
(8.90)
40K
21.60
(9.72)
22.83
(10.27)
24.14
(10.86)
25.43
(11.44)
26.72
(12.02)
28.00
(12.60)
29.29
(13.18)
30.58
(13.76)
26.19
(11.79)
10K
17.15
(7.72)
19.99
(9.00)
22.87
(10.29)
25.77
(11.60)
28.65
(12.89)
31.54
(14.19)
34.42
(15.49)
37.31
(16.79)
27.73
(12.48)
20K
22.16
(9.97)
24.99
(11.25)
27.88
(12.55)
30.78
(13.85)
33.66
(15.15)
36.55
(16.45)
39.43
(17.74)
42.31
(19.04)
32.73
(14.73)
40K
35.21
(15.84)
38.05
(17.12)
40.94
(18.42)
43.83
(19.72)
46.72
(21.02)
49.60
(22.32)
52.49
(23.62)
55.37
(24.92)
45.79
(20.61)
10K
16.77
(7.55)
19.35
(8.71)
21.90
(9.86)
24.45
(11.00)
27.00
(12.15)
29.58
(13.31)
32.09
(14.44)
34.64
(15.59)
24.73
(11.13)
20K
21.78
(9.80)
24.36
(10.96)
26.91
(12.11)
29.46
(13.26)
32.00
(14.40)
34.59
(15.57)
37.10
(16.70)
39.65
(17.84)
29.73
(13.38)
40K
34.83
(15.67)
37.41
(16.83)
39.96
(17.98)
42.51
(19.13)
45.06
(20.28)
47.64
(21.44)
50.16
(22.57)
52.71
(23.72)
42.79
(19.26)
80A
JIS
Schedule
80
Schedule
40
100A
Schedule
80
www.rosemount.com
1-in.
2-in.
3-in.
4-in.
5-in.
6-in.
7-in.
8-in.
9-in.
(25 mm.) (51 mm.) (76 mm.) (102 mm.) (127 mm.) (152 mm.) (178 mm.) (203 mm.) (229 mm.)
177
Rosemount DP Level
March 2015
Figure 17. PFW Pancake Seal
A
B
D
C
E
F
D. Connection to transmitter
E. Diaphragm
F. Flushing connection
A. Process flange
B. Flushing Connection
C. Diaphragm
Dimensions are in inches (millimeters).
Table 31. PFW Pancake Seal Dimensions
Pipe
size
EN1092-1
ANSI / ASME
2-in.
178
3-in.
DN
50
DN
80
Class
Flange diameter
“A” in. (mm.)
Flange
thickness
“B” in. (mm.)
# of
bolts
Bolt circle
“C” in.
(mm.)
Bolt hole
diameter
“D” in.
(mm.)
Standard
diaphragm
diameter “F” in.
(mm.)
150 lb.
300 lb.
600 lb.
900/1500 lb.
2500 lb.
150 lb.
300 lb.
600 lb.
900 lb.
1500 lb.
2500 lb
PN 40
PN 63
PN 100
PN 40
PN 63
PN 100
6.00 (152)
6.50 (165)
6.50 (165)
8.50 (216)
9.25 (235)
7.50 (191)
8.25 (210)
8.25 (210)
10.50 (267)
10.50 (267)
12.00 (305)
6.50 (165)
7.09 (180)
7.68 (195)
7.87 (200)
8.46 (215)
9.06 (230)
0.69 (18)
0.81 (21)
1.00 (25)
1.50 (38)
2.00 (51)
0.88 (22)
1.06 (27)
1.25 (32)
1.50 (38)
1.88 (48)
2.62 (67)
0.67 (17)
0.91 (23)
0.98 (25)
0.83 (21)
0.98 (25)
0.98 (25)
4
8
8
8
8
4
8
8
8
8
8
4
4
4
8
8
8
4.75 (121)
5.00 (127)
5.00 (127)
6.50 (165)
6.75 (172)
6.00 (152)
6.62 (168)
6.62 (168)
8.00 (203)
8.00 (203)
9.00 (229)
4.92 (125)
5.31 (135)
5.71 (145)
6.30 (160)
6.69 (170)
7.09 (180)
0.75 (19)
0.75 (19)
0.75 (19)
1.00 (25)
1.13 (29)
0.75 (19)
0.88 (22)
0.88 (22)
1.25 (32)
1.25 (32)
1.38 (35)
0.71 (18)
0.87 (22)
1.10 (28)
0.71 (18)
0.87 (22)
1.10 (28)
2.30 (58)
2.30 (58)
2.30 (58)
2.30 (58)
2.30 (58)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
2.30 (58)
2.30 (58)
2.30 (58)
3.50 (89)
3.50 (89)
3.50 (89)
www.rosemount.com
March 2015
Rosemount DP Level
Table 32. PFW Pancake Seal Dimensions
Inner
Thickness
Minimum
Outer
Beveled
Thickness with
diameter
with 1/4-NPT 1
gasket I.D.
diameter “L”
Pipe size diameter “G”
/2-NPT F.C. “M”
“K”
“N”
F.C. “M”
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
ANSI / ASME
2-in.
EN1092-1
3-in.
DN 50
DN 80
Weight
lbs. (kg.)
3.62 (92)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
2.62 (67)
8.61 (3.87)
3.62 (92)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
2.62 (67)
10.20 (4.59)
3.62 (92)
2.12 (54)
2.48 (63)
0.97 (25)
1.30 (33)
2.62 (67)
11.65 (5.24)
3.62 (92)
2.12 (54)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
24.84 (11.18)
3.62 (92)
2.12 (54)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
36.92 (16.61)
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
16.83 (7.57)
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
20.88 (9.40)
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
23.35 (10.51)
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.82 (97)
33.83 (15.22)
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.82 (97)
47.39 (19.98)
5.00 (127)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
2.82 (97)
81.97 (36.89)
4.00 (102)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
10.67 (4.80)
4.00 (102)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
14.24 (6.41)
4.00 (102)
2.40 (61)
N/A
0.97 (25)
1.30 (33)
2.62 (67)
16.89 (7.60)
5.43 (138)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
18.76 (8.44)
5.43 (138)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
22.60 (10.17)
5.43 (138)
3.60 (91)
N/A
0.97 (25)
1.30 (33)
3.82 (97)
27.07 (12.18)
www.rosemount.com
179
Rosemount DP Level
March 2015
Figure 18. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Two-Piece Design (Shown with flushing
ring)
D
A
B
E
C
A. Process flange
B. Diaphragm
C. Flushing connection
D. Connection to transmitter
E. Diaphragm
Dimensions are in inches (millimeters).
Table 33. Dimensional Table for FCW 2-Piece Flange Type Flush Diaphragm Seal
ANSI / ASME
Pipe size
2-in.
3-in.
180
Class
Flange
Flange
Bolt circle
Bolt hole
Overall
diameter “A” thickness “B” diameter “C” diameter “D” height “H”
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
Raised face
height “J”
in. (mm.)
150 lb.
6.00 (152)
0.69 (18)
4.75 (121)
0.75 (19)
2.43 (62)
0.68 (17)
300 lb.
6.50 (165)
0.82 (21)
5.00 (127)
0.75 (19)
2.43 (62)
0.68 (17)
600 lb.
6.50 (165)
1.00 (25)
5.00 (127)
0.75 (19)
2.43 (62)
0.68 (17)
1500 lb.
8.50 (216)
1.50 (38)
6.50 (165)
1.00 (25)
2.57 (65)
0.82 (21)
2500 lb.
9.25 (235)
2.00 (51)
6.75 (171)
1.14 (29)
3.07 (78)
0.82 (21)
150 lb.
7.50 (191)
0.88 (22)
6.00 (152)
0.75 (19)
2.43 (62)
0.68 (17)
300 lb.
8.25 (210)
1.06 (27)
6.62 (168)
0.88 (22)
2.43 (62)
0.68 (17)
600 lb.
8.25 (210)
1.25 (32)
6.62 (168)
0.88 (22)
2.43 (62)
0.68 (17)
900 lb.
9.50 (241)
1.50 (38)
7.50 (191)
1.00 (25)
2.57 (65)
0.82 (21)
1500 lb.
10.50 (267)
1.88 (48)
8.00 (203)
1.25 (32)
3.07 (78)
0.82 (21)
2500 lb.
12.00 (305)
2.62 (67)
9.00 (229)
1.38 (35)
4.07 (103)
0.82 (21)
www.rosemount.com
March 2015
Rosemount DP Level
Table 34. Dimensional Table for FCW 2-Piece Flange Type Flush Diaphragm Seal
ANSI / ASME
Pipe
size
2-in.
3-in.
Thickness
RTJ diameter Diaphragm Raised face
Inner
Thickness with
1
with
/2-NPT
“E”
diameter “F” diameter “G” diameter “K” 1/4-NPT F.C. “L”
F.C. “L”
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
Weight
lbs. (kg.)
3.25 (83)
2.30 (58)
4.00 (102)
2.12 (54)
1.40 (36)
1.70 (43)
8.78 (3.95)
3.25 (83)
2.30 (58)
4.25 (108)
2.12 (54)
1.40 (36)
1.70 (43)
10.56 (4.75)
3.25 (83)
2.30 (58)
4.25 (108)
2.12 (54)
1.40 (36)
1.70 (43)
12.01 (5.40)
3.75 (95)
2.30 (58)
4.88 (124)
2.12 (54)
1.40 (36)
1.70 (43)
26.81 (12.06)
4.00 (102)
3.50 (89)
5.25 (133)
2.12 (54)
1.40 (36)
1.70 (43)
39.98 (17.99)
4.50 (114)
3.50 (89)
5.25 (133)
3.60 (91)
1.50 (38)
1.80 (46)
16.04 (7.22)
4.88 (124)
3.50 (89)
5.75 (146)
3.60 (91)
1.50 (38)
1.80 (46)
20.72 (9.32)
4.88 (124)
3.50 (89)
5.75 (146)
3.60 (91)
1.50 (38)
1.80 (46)
23.19 (10.44)
4.88 (124)
3.50 (89)
6.12 (155)
3.60 (91)
1.50 (38)
1.80 (46)
35.56 (16.00)
5.38 (137)
3.50 (89)
6.62 (168)
3.60 (91)
1.50 (38)
1.80 (46)
50.72 (22.82)
5.00 (127)
3.50 (89)
6.62 (168)
3.60 (91)
1.50 (38)
1.80 (46)
86.12 (38.75)
Figure 19. RCW Flanged Remote Seal Ring Type Joint (RTJ) and Flushing Connection Ring
A
D
B
E
C
A. Process flange
B. Diaphragm
C. Flushing connection
www.rosemount.com
D. Connection to transmitter
E. Diaphragm
Dimensions are in inches (millimeters).
181
Rosemount DP Level
March 2015
Table 35. RCW Flanged Remote Seal Dimensions
Pipe
size
1
/2-in.
ANSI/ ASME
3/4-in.
1-in.
11/2-in.
182
Class
Lower
Lower
Overall height
Bolt
RTJ
Flange
Flange
Bolt hole housing
housing
“H” in. (mm.)
circle
groove
Weight
diameter thickness
diameter inner
outer
diameter
diameter
lbs.
1
1
“A” in.
“B” in.
“D” in. diameter
diameter No or /4-in. /2-in. NPT
“C” in.
“F” in.
(kg.)
flush
(mm.)
(mm.)
(mm.)
“E” in.
“G” in. NPT flush
(mm.)
(mm.)
(mm.)
(mm.) connection connection
2500 lb.
5.25
(133)
1.19 (30)
3.50 (89)
0.88 (22)
0.62 (16)
1.69 (43)
2.64 (67)
2.88 (73)
3.18 (81)
1.49
(0.67)
300/600
lb.
4.62
(117)
0.62 (16)
3.25 (83)
0.75 (19)
0.82 (21)
1.69 (43)
2.64 (67)
2.88 (73)
3.18 (81)
5.22
(2.35)
900/1500
lb.
5.12
(130)
1.00 (25)
3.50 (89)
0.88 (22)
0.82 (21)
1.75 (45)
2.64 (67)
2.88 (73)
3.18 (81)
7.45
(3.35)
2500 lb.
5.50
(140)
1.25 (32)
3.75 (95)
0.88 (22)
0.82 (21)
2.00 (51)
2.90 (74)
2.88 (73)
3.18 (81)
10.11
(4.55)
150 lb.
4.25
(108)
0.50 (13)
3.12 (79)
0.63 (16)
1.05 (27)
1.88 (48)
2.64 (67)
2.88 (73)
3.18 (81)
4.38
(1.97)
300 lb.
4.88
(124)
0.62 (16)
3.50 (89)
0.75 (19)
1.05 (27)
2.00 (51)
2.77 (70)
2.88 (73)
3.18 (81)
5.67
(2.55)
600 lb.
4.88
(124)
0.69 (18)
3.50 (89)
0.75 (19)
1.05 (27)
2.00 (51)
2.77 (70)
2.88 (73)
3.18 (81)
5.95
(2.68)
900/1500
lb.
5.88
(149)
1.12 (29)
4.00
(102)
1.00 (25)
1.05 (27)
2.00 (51)
2.83 (72)
2.88 (73)
3.18 (81)
10.15
(4.57)
2500 lb.
6.25
(159)
1.38 (35)
4.25
(108)
1.00 (25)
1.05 (27)
2.38 (60)
3.27 (83)
2.88 (73)
3.18 (81)
14.55
(6.55)
150 lb.
5.00
(127)
0.62 (16)
3.88 (98)
0.63 (16)
1.61 (41)
2.56 (65)
3.27 (83)
2.88 (73)
3.18 (81)
6.78
(3.05)
300 lb.
6.12
(156)
0.75 (19)
4.50
(114)
0.88 (22)
1.61 (41)
2.69 (68)
3.58 (91)
2.88 (73)
3.18 (81)
10.01
(4.50)
600 lb.
6.12
(156)
0.88 (22)
4.50
(114)
0.88 (22)
1.61 (41)
2.69 (68)
3.58 (91)
2.88 (73)
3.18 (81)
10.90
(4.91)
900/1500
lb.
7.00
(178)
1.25 (32)
4.88
(124)
1.12 (28)
1.61 (41)
2.69 (68)
3.64 (93)
2.88 (73)
3.18 (81)
16.43
(7.39)
2500 lb.
8.00
(203)
1.75 (45)
5.75
(146)
1.25 (32)
1.61 (41)
3.25 (83)
4.52
(115)
2.88 (73)
3.18 (81)
29.39
(13.23)
www.rosemount.com
March 2015
Rosemount DP Level
Figure 20. FUW Flush Flanged Type Seal - EN1092-1 Type D
A
C
D
B
Dimensions are in inches (millimeters).
A. Process flange
B. Diaphragm
C. Connection to transmitter
D. Diaphragm
Table 36. FUW Flush Flanged Type Seal Dimensions
EN 1092-1
Bolt
Flange
Flange
Bolt hole
circle
diameter thickness
diameter # of
Pipe
“C”
Class
“A”
“B”
“D”
size
bolts
in.
in. (mm.) in. (mm.)
in. (mm.)
(mm.)
Standard Raised
diaphragm face Groove Groove Groove Weight
diameter diameter O.D.
I.D.
depth
lbs.
“F”
“G”
“J”
“K”
“L”
(kg.)
in. (mm.) in. (mm.)
DN
50
PN
40
6.50
(165)
0.79 (20)
4.92
(125)
0.71 (18)
4
2.30 (58)
4.00
(102)
3.46
(88)
2.83
(72)
0.16
(4.0)
6.29
(2.83)
DN
80
PN
40
7.87
(200)
0.94 (24)
6.30
(160)
0.71 (18)
8
3.50 (89)
5.43
(138)
4.76
(121)
4.13
(105)
0.16
(4.0)
11.29
(5.08)
Figure 21. FVW Flush Flanged Type Seal - EN1092-1 Type C
A
C
D
B
Dimensions are in inches (millimeters).
A. Process flange
B. Diaphragm
www.rosemount.com
C. Connection to transmitter
D. Diaphragm
183
Rosemount DP Level
March 2015
EN 1092-1
Table 37. FVW Flush Flanged Type Seal Dimensions
Pipe
size
Standard
Flange
Flange
Bolt hole
Groove Tongue Tongue
diaphragm
Bolt circle
Weight
diameter thickness
diameter # of
O.D.
I.D.
depth
diameter
“C” in.
lbs.
Class
“A” in.
“B” in.
“D” in. bolts
“J” in. “K” in. “L” in.
“F” in.
(mm.)
(kg.)
(mm.)
(mm.)
(mm.)
(mm.) (mm.) (mm.)
(mm.)
DN 50
PN 40
6.50
(165)
0.79 (20)
4.92 (125)
0.71 (18)
4
2.30 (58)
3.43
(87)
2.87
(73)
0.18
(4.5)
5.52
(2.48)
DN 80
PN 40
7.87
(200)
0.94 (24)
6.30 (160)
0.71 (18)
8
3.50 (89)
4.72
(120)
4.17
(106)
0.18
(4.5)
10.01
(4.50)
Figure 22. RTW Threaded Seal
D
A
B
C
E
A. Upper housing
B. Diaphragm
C. Lower housing or flushing connection
D. Connection to transmitter
E. Diaphragm
Dimensions are in inches (millimeters).
Table 38. RTW Threaded Seal Dimensions
Rating
Overall diameter 'A' in.
(mm.)
2500 psi (173 bar)
5000 psi (345 bar)
10000 psi (690 bar)
3.74 (95)
3.74 (95)
4.00 (102)
184
Overall height “B” in. (mm.)
No or 1/4-in. NPT flush
connection
2.47 (63)
1.95 (50)
1.95 (50)
1
/2-in. NPT flush connection
2.82 (72)
2.31 (59)
N/A
www.rosemount.com
March 2015
Rosemount DP Level
Table 39. RTW Threaded Seal Weights pounds (kilograms)
Class
Pipe size
1500 psi
2500 psi
5000 psi
10000 psi
10.73
(4.83)
10.72
(4.82)
10.67
(4.80)
10.62
(4.78)
10.52
(4.73)
10.38
(4.67)
10.23 (4.60)
6.15
(2.77)
6.13
(2.76)
6.09
(2.74)
6.03
(2.71)
5.93
(2.67)
5.76
(2.59)
5.61 (2.52)
5.72
(2.57)
5.70
(2.57)
5.66
(2.55)
5.60
(2.52)
5.50
(2.48)
5.33
(2.40)
5.18 (2.33)
6.95
(3.13)
6.93
(3.12)
6.89
(3.10)
6.83
(3.07)
6.73
(3.03)
6.56
(2.95)
6.41 (2.88)
Parallel thread: G1/2A
DIN 16288
N/A
N/A
N/A
N/A
Tapered thread: R1/2
per ISO 7/1
N/A
N/A
N/A
N/A
1/4-18 NPT
3
ANSI / ASME
/8-18 NPT
1/2-14 NPT
3/4-14 NPT
1-11.5 NPT
1 1/4-11.5 NPT
EN 1092 - 1
1 1/2 - 11.5 NPT
103 bar
172 bar
344 bar
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
12.93
(5.82)
N/A
7.07
(3.18)
N/A
6.64
(3.00)
10.67
(4.80)
6.10
(2.75)
5.67
(2.55)
Figure 23. HTS Male Threaded Seal
A
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
Table 40. HTS Male Threaded Seal Dimensions
Process type Connection size
ANSI NPT
EN 10226 BSP
1-in. NPT
11/2-in. NPT
2-in. NPT
G1 BSP
G11/2 BSP
G2 BSP
www.rosemount.com
Outer diameter Diaphragm diameter Length “C” Overall height Weight lbs.
“A” in. (mm.)
“B” in. (mm.)
in. (mm.) “D” in. (mm.)
(kg.)
2.03 (51.6)
2.36 (59.9)
2.74 (69.6)
2.03 (51.6)
2.36 (59.9)
2.74 (69.6)
1.09 (27.9)
1.70 (43.2)
1.90 (48.3)
1.09 (27.9)
1.70 (43.2)
1.90 (48.3)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
0.87 (22.0)
0.98 (24.9)
1.24 (31.5)
2.50 (63.5)
2.50 (63.5)
2.50 (63.5)
2.15 (54.6)
2.24 (56.9)
2.50 (63.5)
1.60 (0.72)
2.32 (1.04)
3.09 (1.39)
1.48 (0.67)
2.10 (0.95)
3.06 (1.38)
185
Rosemount DP Level
March 2015
Figure 24. SCW Tri Clamp Seal
A
A
B
A
B
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
Table 41. SCW Tri-Clamp Seal Dimensions
Pipe size
186
Outer diameter “A” O-ring groove diameter “B” Diaphragm diameter “C”
in. (mm.)
in. (mm.)
in. (mm.)
Weight
lbs. (kg.)
11/2-in.
2.00 (51)
1.72 (44)
1.21 (31)
0.97 (0.44)
2-in.
2.50 (64)
2.22 (56)
1.68 (43)
1.23 (0.55)
21/2-in.
3.05 (77)
2.78 (71)
2.07 (53)
1.56 (0.70)
3-in.
3.58 (91)
3.28 (83)
2.58 (66)
1.98 (0.89)
4-in.
4.68 (119)
4.35 (110)
3.66 (93)
3.02 (1.36)
www.rosemount.com
March 2015
Rosemount DP Level
Figure 25. SSW Tank Spud Seal
A
B
C
D
A.Connection to transmitter
B. Extension length
C. Diaphragm
D. Tank spud
Dimensions are in inches (millimeters).
Table 42. SSW Tank Spud Seal Dimensions
Pipe size
Extension length
“A” in. (mm.)
Weight lbs. (kg.)
4-in. SCH 5
2-in. Long
6-in. Long
2.10 (53)
6.10 (155)
9.20 (4.14)
12.66 (5.70)
Figure 26. STW Hygienic Thin Wall Tank Spud Seal
A
Weight lbs (kg): 3.09 (1.39)
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
www.rosemount.com
187
Rosemount DP Level
March 2015
Figure 27. EES Hygienic Flanged Tank Spud Extended Seal
A
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
Table 43. EES Hygienic Flanged Tank Spud Extended Seal Dimensions
Standard
Flange
Flange
Bolt circle
Extension
Bolt hole
diaphragm
Pipe
# of
Weight lbs.
diameter “A” thickness “B”
diameter “C”
diameter “E” diameter “F”
diameter “D”
size
bolts
(kg.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
DN50
6.50 (165)
0.79 (20)
4
4.92 (125)
2.99 (76)
3.24 (82)
0.55 (14)
10.48 (4.72)
DN80
7.87 (200)
0.94 (24)
8
6.30 (160)
4.04 (102)
4.24 (108)
0.55 (14)
17.34 (7.80)
Figure 28. VCS Tri Clamp In-Line Seal
Dimensions are in inches (millimeters).
188
www.rosemount.com
March 2015
Rosemount DP Level
Table 44. VCS Tri Clamp In-Line Seal Dimensions
Pipe size
Inner diameter “A” Groove diameter “B” Flange diameter “C” Outer diameter “D”
Weight lbs. (kg.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
1-in.
0.87 (22)
1.72 (44)
1.99 (51)
2.33 (59)
2.67 (1.20)
1½-in.
1.37 (35)
1.72 (44)
1.99 (51)
2.73 (69)
2.69 (1.21)
2-in.
1.87 (48)
2.22 (56)
2.52 (64)
3.19 (81)
3.43 (1.54)
3-in.
2.87 (73)
3.28 (83)
3.58 (91)
4.14 (105)
4.76 (2.14)
4-in.
3.82 (97)
4.35 (110)
4.69 (119)
5.06 (129)
6.24 (2.81)
Figure 29. SVS VARIVENT Compatible Connection Seal
3.31 (84)
A
0.66
(17)
Weight lbs (kg): 1.13 (0.51)
B
2.24 (57)
2.67 (68)
2.78 (71)
A. Connection to Transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
Figure 30. SHP Cherry-Burrell “I” Line Seal
A
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
www.rosemount.com
189
Rosemount DP Level
March 2015
Table 45. SHP Cherry-Burrell “I” Line Seal Dimensions
Size
Outer diameter “A” in.
(mm.)
Extension diameter “B” in.
(mm.)
Weight lbs. (kg.)
2-in.
2.64 (67)
2.24 (57)
0.74 (0.33)
3-in.
3.88 (98)
3.31 (84)
1.76 (0.79)
Figure 31. SLS Hygienic Dairy Process Connection Female Thread Seal per DIN 11851
A
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters)
Table 46. SLS Hygienic Dairy Process Connection Female Thread Seal per DIN 11851 Dimensions
Female Process size/ Hub diameter “A”
thread
rating
in. (mm.)
DIN
11851
190
DN 40 PN 40
DN 50 PN 25
1.89 (48)
2.40 (61)
“B” in. Thread diameter “C” Hub height “D”
“E”
(mm.)
in. (mm.)
in. (mm.)
in. (mm.)
2.20 (56)
2.70 (69)
Rd 65 X 1/6-in.
1
Rd 78 X /6-in.
Weight
lbs. (kg.)
1.18 (30)
0.39 (10)
1.61 (0.72)
1.22 (31)
0.43 (11)
2.32 (1.04)
www.rosemount.com
March 2015
Rosemount DP Level
Figure 32. WSP Saddle Seal
A
B
B
C
C
A. Upper housing
Dimensions are in inches (millimeters).
A. Upper housing
B. Connection to transmitter
C. Diaphragm
Dimensions are in inches (millimeters).
Table 47. WSP Saddle Seal Dimensions
Size
Overall height “A” Inner diameter “B” Outer diameter “C” Bolt circle diameter “D” in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
6 Bolts
8 Bolts
2-in.
2.72 (69)
1.50 (38)
2.50 (64)
2.99 (76)
2.91 (74)
3-in.
2.46 (63)
2.01 (51)
3.02 (77)
2.99 (76)
2.91 (74)
4-in. and larger
2.60 (66)
2.01 (51)
3.00 (76)
2.99 (76)
2.91 (74)
www.rosemount.com
191
Rosemount DP Level
March 2015
Table 48. WSP Saddle Seal Weights
Pipe size
ANSI / ASME
2-in.
3-in.
4-in.
Class
Weights lbs. (kg.)
1250 psig
4.61 (2.09)
1500 psig
4.63 (2.10)
1250 psig
4.36 (1.98)
1500 psig
4.38 (1.99)
1250 psig
5.46 (5.48)
1500 psig
5.60 (2.54)
Figure 33. UCP and PMW Threaded Pipe Mount Seals
A
UCP
Weights lbs (kg): 1.33 (0.60)
B
PMW
A
Weight lbs (kg): 0.77 (0.35)
1.06
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
192
www.rosemount.com
March 2015
Rosemount DP Level
Figure 34. CTW Chemical Tee Seal
A
B
Weight lbs (kg): 4.18 (1.88)
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
Figure 35. TFS Wafer Style In-Line Seal
A
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
Table 49. TFS Wafer Style In-Line Seal Dimensions
Pipe size
Flange face diameter “A” Outer diameter “B” Inner diameter “C”
in. (mm.)
in. (mm.)
in. (mm.)
Weight lbs. (kg.)
1-in.
2.00 (51)
2.64 (67)
1.090 (28)
3.91 (1.76)
11/2-in.
2.88 (73)
3.23 (82)
1.61 (41)
5.73 (2.58)
2-in.
3.62 (92)
3.74 (95)
2.07 (52)
7.42 (3.34)
3-in.
5.00 (127)
5.00 (127)
3.07 (78)
12.20 (5.49)
4-in.
6.19 (157)
6.19 (157)
4.00 (102)
17.56 (7.90)
DN25
2.68 (68)
2.72 (69)
1.09 (28)
4.76 (2.14)
DN40
3.46 (88)
3.46 (88)
1.61 (41)
7.35 (3.31)
DN50
4.02 (102)
4.09 (104)
1.99 (51)
9.97 (4.49)
DN80
5.43 (138)
5.47 (139)
3.24 (82)
15.24 (6.86)
DN100
6.38 (162)
6.46 (164)
4.22 (107)
18.69 (8.41)
www.rosemount.com
193
Rosemount DP Level
March 2015
Figure 36. WFW Flow-Thru Flanged Seal
A
B
A
B
A. Connection to transmitter
B. Diaphragm
Dimensions are in inches (millimeters).
Table 50. WFW Flow-Thru Flanged Seal Dimensions
Upper to
Flange
Overall
Bolt circle
Outside
Bolt hole
centerline
thickness
length “A”
diameter “C” diameter “D” diameter “E”
height “B”
“F” in.
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
in. (mm.)
(mm.)
Nominal
Class
pipe size
1-in.
2-in.
3-in.
150 lb.
Weight lbs.
(kg.)
7.00 (178)
2.40 (61.0)
3.12 (79)
4.25 (108)
0.62 (16)
0.50 (13)
11.80 (5.31)
9.00 (229)
3.31 (84)
4.75 (121)
6.00 (152)
0.75 (19)
0.69 (18)
16.89 (7.60)
11.00 (279)
3.61 (92)
6.00 (152)
7.50 (191)
0.75 (19)
0.88 (22)
29.08 (13.09)
Table 51. Capillary and Support Tube Weights Measured per Foot (.30 m.) of Capillary
194
Part
Weight lbs. (kg.)
0.03” ID, SST armor
0.095 (0.043)
0.04” ID, SST armor
0.091 (0.041)
0.075” ID, SST armor
0.100 (0.045)
0.03” ID, PVC armor
0.105 (0.048)
0.04” ID, PVC armor
0.100 (0.045)
0.075” ID, PVC armor
0.110 (0.050)
Capillary Adaptor
0.085 (0.039)
2” Support Tube
0.035 (0.016)
4” Support Tube
0.090 (0.041)
www.rosemount.com
Rosemount DP Level
Product Data Sheet
00813-0100-4016, Rev PA
March 2015
Rosemount World Headquarters
Emerson Process Management
6021 Innovation Blvd
Shakopee, MN 55379, USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
[email protected]
North America Regional Office
Emerson Process Management
8200 Market Blvd.
Chanhassen, MN 55317, USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
[email protected]
Latin America Regional Office
Emerson Process Management
1300 Concord Terrace, Suite 400
Sunrise, Florida, 33323, USA
+1 954 846 5030
+1 954 846 5121
[email protected]
Europe Regional Office
Emerson Process Management Europe GmbH
Neuhofstrasse 19a P.O. Box 1046
CH 6340 Baar
Switzerland
+41 (0) 41 768 6111
+41 (0) 41 768 6300
[email protected]
Asia Pacific Regional Office
Emerson Process Management Asia Pacific Pte Ltd
1 Pandan Crescent
Singapore 128461
+65 6777 8211
+65 6777 0947
[email protected]
Middle East and Africa Regional Office
Emerson Process Management
Emerson FZE P.O. Box 17033,
Jebel Ali Free Zone - South 2
Dubai, United Arab Emirates
+971 4 8118100
+971 4 8865465
[email protected]
Standard Terms and Conditions of Sale can be found at: www.rosemount.com\terms_of_sale.
The Emerson logo is a trademark and service mark of Emerson Electric Co.
Rosemount and Rosemount logotype are registered trademarks of Rosemount Inc.
ERS, Coplanar, SmartPower, Tuned-System, Rosemount, and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management
group of companies.
HART and WirelessHART are registered trademarks of FieldComm Group.
PROFIBUS is a registered trademark of PROFINET International (PI).
Foundation fieldbus is a trademark of FieldComm Group.
SYLTHERM and D.C. Silicone 704 are registered trademarks of Dow Corning Corporation.
VARIVENT is a registered trademark of GEA Process Engineering Limited.
eurofast and minifast are registered trademarks of TURCK.
Fluorinert is a trademark of 3M.
Neobee is a registered trademark of Stepan Specialty Products, LLC.
All other marks are the property of their respective owners.
© 2015 Rosemount Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement