H.264 Standalone DVR
H.264 Standalone DVR
USER MANUAL_V2.08
INDEX
Chapter one Products Introduce.......................................................................................4
1.1 Technical Parameter............................................................................................................................ 4
1.2 Performance........................................................................................................................................ 5
Chapter Two Hardware......................................................................................................... 6
2.1 H.264 standalone 4CH/8CH/16CH/24CH/32CH DVR....................................................................... 6
Chapter Three Operation...................................................................................................12
3.1Operation instruction........................................................................................................................ 12
3.2 Powering On......................................................................................................................................14
3.3 Shutdown...........................................................................................................................................16
3.4 Multi Channel....................................................................................................................................16
3.5 Preview..............................................................................................................................................16
3.6 Recording operation....................................................................................................................... 17
3.7 Playback video.................................................................................................................................. 18
3.8 How to control PTZ...........................................................................................................................19
3.9 Alarm control.....................................................................................................................................20
3.10 Display Adjust................................................................................................................................. 21
Chapter Four Menu Operation Guide............................................................................ 22
4.1 Recording Setup................................................................................................................................ 22
4.2 Camera.............................................................................................................................................. 24
4.3 Network Setup...................................................................................................................................26
4.4 System Setup..................................................................................................................................... 31
4.5 System Management......................................................................................................................... 34
Chapter Five IE Preview.....................................................................................................37
5.1 logging on interface.......................................................................................................................... 37
5.2 System Settings................................................................................................................................. 38
5.3 State control.......................................................................................................................................41
Chapter Six Asee series phone software for use................................................... 44
6.1 Asee................................................................................................................................................... 44
6.1.1 Instructions of Android ................................................................................................................. 45
6.1.2 Instructions of Blackberry ............................................................................................................ 51
6.1.3 Instructions of iPhone ...................................................................................................................55
6.1.4 Instructions of Symbian..................................................................................................................61
Chapter Seven
Instructions of imac......................................................................... 65
7.1 Essential condition.............................................................................................................................65
7.2 Installation and operation instructions............................................................................................... 65
Chapter Eight
The Cloud funtion............................................................................... 69
8.1 DVR Setup........................................................................................................................................ 69
8.2 PC Setup............................................................................................................................................72
8.3 The other operation of PC..................................................................................................................77
Chapter nine The use of P2P phone software Nvplayer..........................................86
2
9.1
instructions of Android................................................................................................................... 86
9.1.1 Essential condition..........................................................................................................................86
9.1.2 Installation and operation instructions............................................................................................ 86
9.2
instructions of iPhone..................................................................................................................... 91
9.2.1 Essential condition..........................................................................................................................91
9.2.2 Installation and operation instructions............................................................................................ 91
Chapter Ten FAQ (Frequently Asked Questions).......................................................96
3
Power
This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the
machine.
If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug
away from power socket;
... safety
This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the
raining or humid area.
In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified
technician check it before reboot the DVR;
The DVR is the precision machine, there is nothing for repair by customers themselves in it, when it break
down, please ask the qualified technician to check and repair, or contact with the agents of it.
... Installation
Please keep the DVR in level for installation;
Pay attention to equipment ground;
For the first time to install the DVR, please make sure if the hard disk drive install or not;
Prevent to open the case and change the hard disk drive in electrified;
Propose to select the performance of hard disk drive will be 7200 rotating speed person second;
Please select the appropriate installation site, so let the air can be free flow inside the DVR, prevent the
machine overheating;
Please do not install the DVR nearby the radiator, air chute etc. heat source,
or where the direct sunlight, too much dust, or mechanical vibration or attack;
Chapter one Products Introduce
1.1 Technical Parameter
Compression standard
H.264 baseline [email protected]
Video iInput
Composite 1.0Vp-p/75Ω,BNC×4/ BNC×8/ BNC×16/ BNC×24/ BNC×32
Video output
Composite 1.0Vp-p/75Ω,BNC×1, VGA×1
Resolution
Preview
D1 704×576(PAL),720×480(NTSC)
CIF 352×288(PAL),320×240(NTSC)
Recording
D1 704×576(PAL),720×480(NTSC)
CIF 352×288(PAL),320×240(NTSC)
Frate rate
Preview/ recording
4ch 100fps(PAL), 120fps(NTSC
8ch 200fps(PAL), 240fps(NTSC)
16ch 400fps(PAL), 480fps(NTSC)
24ch 600fps(PAL), 720fps(NTSC)
32ch 600fps(PAL), 720fps(NTSC)
Audio input
-8dB~22k,RCAx4(4ch)
Audio output
-8dB~92dB,RCAx1
Audio decode
ADPCM
Alarm input
Input low level alarm, user setting normal open or normal close, Varies
according to the model
4
Alarm output
1ch output or 2ch output;Varies according to the model
Recording mode
Manual recording, timing recording , motion detection recording and external
Simplex/duplex/ triplex
triplex(recording, playback , LAN transmission)
alarm recording
LAN
RJ45(10M/100M self-adapting)
PTZ control
Yes
Communication
RS485×1,USB2.0×2
USB
USB mouse control
Hard disk drive
1or2or4x SATA(2TB or above)
Remote control unit
Yes
Dimension
Main board size : 220mm x 112mm
Power supply
AC110-230V
1.2 Performance
Turn-by-turn analog video output and
VGA interface, according to TVmonitor or
VGA
monitor
to
live
view
Internal 1or2 or 3SATA interface, MAX
in1/4/8/9/16/24/32or more video channel
Real-time
monitoring
tomonitoring the recording streaming and
the record file capacity in Every hours
every channel, to presentation the status
2TB hard disk drive, the file of hard
Storage
function
disk drive include cover mode
circulation recording and none cyclical
recording, the storage data to use the
of video channel, recording, dynamic
proprietary format, can not falsify the
detection, video loss, monitoring lock-up.
data, make sure the data safety.
You can view the system log in local
DVR.
Video compression format:: H.264
Compression
format
Through USB interface to backup. ( for
Support 8ch video and audio signal,
video
Backup
function
and audio maintaining stability in
synchronous.
example USB drive and mobile hard
disk drive etc.) The video file can be
downloaded
by
Client
software
through LAN to laptop hard disk drive.
* through network to real time remote
* Multiplex, to achieve real time recording
monitoring;
to be independent at the same time to
* PTZ control
single channel playback, research and
* recording research and real time
backwards, network monitoring, network
playback;
search download etc.
* system setting parameter modify and
* Multiple recording
mode: Manual,
Recording
normal, alarm, linkage,dynamic detection
and
recording etc. turn-by-turn pre-recording
playback
function.
function
* Can playback the record file in DVR
the system software upgrade;
Network
Operation
function
* remote monitoring alarm process and
view the system log message;
* to use embedded TCP/IP protocol and
Embedded
Operation
System,
can
through network, to achieve quick-search
access the DVR through client software
the recording file and recording type,
program bundle in the package;
multiple playback type: SLOW, Fast
*Management Model: use enhancement
Forward, Backwards, step Forward.
user management, password mode to
Display the exact time of event occurred
make sure the valid user to login the
while recording file playback.
system, flexible convenient and fast to
set
5
the
different
permission
user
requirement.
8ch alarm input ( alarm event mode can
be set normal open or normal close
selection),and turn-by-turn video loss
alarm, dynamic detection alarm, the
* Possess specific interface, achieve
alarm device may be smoke detection
Alarm
censer,
linkage
detector.Possess
function
alarm output,
temperature
4ch
detector,
relay
IR
switch
Com-munication
port
flexible convenient and
alarm input and PTZ control;
* possess a standard Ethernet interface,
achieve
the
network
remote
monitoring.
fast to achieve alarm linkage and
lighting control at site.
They’re possess protective circuit in
Alarm input and alarm output port,
make sure the device not to damaged.
* Support PTZ decoder through RS485
communicate
PTZ
control
* scalable multiple decoder protocol,
Intelligent
easy to achieve to control the pan
operation
driver
and
speed
dome
camera
* mouse operation function;
* In menu for same setting and to
process shortcut copy operation
function.
Chapter Two Hardware
2.1 H.264 standalone 4CH/8CH/16CH/24CH/32CH DVR
2.1.1 Hard disk Installation
For the first use, please install the hard disk
1 Remove the screws on both
○
2 extracted from the next cover up
○
sides of shell
6
3 connect hard disk and mother board
○
4 fix the screw of hard disk
○
5 close cover
○
6 install the screws on both sides of shell
○
2.1.2 Rear panel
4CH
Item
Interface
1
VIDEO IN
4ch video input
Description
2
AUDIO IN
4ch audio input
3
V-OUT
1ch video output
4
A-OUT
1ch audio output
5
VGA
6
HD-OUT
VGA monitor
7
NETWORK
8
USB
9
ON/OFF
Power supply switcher
10
DC-12V
Power adaptor port
HDMI interface
RJ45 for internet
First USB for backup or upgrade system of DVR; Second
USB for mouse
11
ALARM IN:1 2 3 4 alarm input port
RS-485:A, B
ALARM OUT: N1 alarm output port, every channel connect
GND、OUT、COM;
every two channel OUT, COM port is for GND;
8CH
7
Item
Interface
1
VIDEO IN
Description
2
AUDIO IN
3
V-OUT
1ch video output
4
A-OUT
1ch audio output
5
VGA
6
HD-OUT
7
NETWORK
8
USB
9
ON/OFF
Power supply switcher
10
DC-12V
Power adaptor port
8ch video input
4ch
or
8ch audio input
VGA monitor
HDMI interface
RJ45
First USB for backup or upgrade system of DVR; Second
USB for mouse
11
ALARM IN:IN1-IN4 alarm input port
RS-485:A , B
ALARM OUT: N1 alarm output port, every channel connect
GND、OUT、COM;
every two channel OUT, COM port is for GND;
16CH
8
Item
Interface
1
VIDEO IN
16ch video input
2
AUDIO IN
4ch audio input
3
V-OUT
1ch video output
4
A-OUT
1ch audio output
5
VGA
6
HD-OUT
7
NETWORK
8
USB/ MOUSE
Description
VGA monitor
HDMI interface
RJ45 for internet
First USB for backup or upgrade system of DVR;Second
USB for mouse
9
ON/OFF
Power supply switcher
10
DC-12V
Power adaptor port
ALARM IN:4CH
11
alarm input port
RS-485:A, B
ALARM OUT: N1 N2 for alarm output port, every channel
connect
C and O;
port is for GND;
24CH
Item
Interface
1
VIDEO IN
24ch video input
Description
2
AUDIO IN
8ch audio input
3
V-OUT
1ch video output
4
A-OUT
1ch audio output
5
VGA
6
NETWORK
7
USB/ MOUSE
VGA monitor
RJ45 for internet
First USB for backup or upgrade system of DVR;Second
USB for mouse
8
ON/OFF
Power supply switcher
9
DC-12V
Power adaptor port
10
HD-OUT
11
TALK
HDMI interface
AUDIO TALKBACK
9
ALARM IN:16CH
12
RS-485:A, B
alarm input port
RS485-S A,B
ALARM OUT: N1 N2 for alarm output port, every channel
connect
port is for GND;
C and O;
32CH
Item
Interface
1
VIDEO IN
32ch video input
Description
2
AUDIO IN
8ch audio input
3
V-OUT
1ch video output
4
A-OUT
1ch audio output
5
VGA
6
NETWORK
7
USB/ MOUSE
VGA monitor
RJ45 for internet
First USB for backup or upgrade system of DVR;Second
USB for mouse
8
ON/OFF
Power supply switcher
9
DC-12V
Power adaptor port
10
HD-OUT
HDMI interface
11
TALK
12
AUDIO TALKBACK
ALARM IN:16CH
RS-485:A, B
alarm input port
RS485-S A,B
ALARM OUT: N1 N2 for alarm output port, every channel
connect
C and O;
port is for GND;
2.1.3 Alarm input port
8chanel alarm input, the mode of alarm input is no restriction (possible is normal open also normal close);
the GND alarm detector connect to COM under parallel connection (the power of alarm detector supply by
external power supply;
the ground terminal of alarm detector join-up in parallel with DVR;
the NC of alarm detector connect with the input end (alarm) of DVR;
when you want to reset the remote alarm of triggered , the +12V power supply of alarm detector supply by DVR,
10
for example, smoke detector.
When you select the external power supply, please share the GND with DVR;
Alarm input circuit:
Alarm inlet connection:
2.1.4
Alarm
output port
4 way switching
value alarm output,
selectable in normally open contact, also selectable in normally closed contact, the external alarm
device
should
be
need Vcc;
Chapter Three Operation
3.1Operation instruction
3.1.1 Remote control AND Front panel keypad
11
Table:
S/
N
KEYpad
Name
1
【POWER】
2
【MENU】
3
【ESC】
4
5
Operating
instruction
S/
N
Keypad
Name
8
【 ENTER 】
【OK】
This button is used
as“enter”and“ok” key in most
circumstances
9
【PTZ】
Access/exit from PTZ control
under preview state
10
【+/-】
Volume or number
increase/reduction Select item
of the list
11
【
ZOOM
IN/OUT】
Lens control
Power ON/OFF
Access main menu
Exit operation or enter upper
menu
Close soft keyboard
Close current window
Exit from current control
Return to last menu
Exit from PTZ control under
preview state
【
】
Slow playback,1/2×, 1/4×,
1/8× and single frame play
【
】
Fast playback, 2×,4× and 8×
12
Operating
instruction
playback
12
13
【
【
【
Playback stop
】
】
▲.▼.
6
】
【REC】
7
【SEARCH】
14
【0~9 10+】
Digital input Corresponding;
Channel is magnified in full
screen under preview state
【FN】
Short cut
【
】
Switching
of
1/4/8/9/16/24/32Preview mode
Play / Pause
Four-way to move the focal
point in main menu, up and
down to move in the normal
window, to control pan driver
to move in
the PTZ control windows
15
To mode of recording
Search for
choosing
playback
16
【ALARM】
【CLEAR】
Alarm reset
Clear alarm
time
3.1.2 How to use mouse of DVR (for right hand mouse)
To any function menu icon click the mouse left key into the menu
To run the control point out operation
Change again select frame or motion detection piece mode
Click the assemble frame popping to pull down the list
In the input frame, can select digit, character, lowercase, block letter, left click
mouse on the keyboard of character input, that’s. ← say move back, _ say
1
Left key single click
blank,Shift say switch case .
13
Right click mouse, popping the shortcut menu, as follows;
2
Right click mouse
。
Through the menu can be switching preview screen window mode, start
replays, PTZ control. Four pictures playback mode, the point of the right mouse
button, Can in a single picture, four pictures, eight pictures (8 road playback), 16
screen (16 road playback), twenty four picture,thirty two picture,
broadcast control switch view show or hide broadcast control bar.
3
Double
click
left
button
To run the ActiveX Control ActiveX special operation, For example, double click
the certain item of record listed file, then the system will playback the segment
record video.
Depress the left key and dragging the mouse, banding select Motion detection
area, depress right key of mouse and Dragging, cancel the banding select area.
4
Dragging the mouse
Dragging playback ProgressBar back and forth to dolly moves, to achieve the
playback position adjustment. Dragging the audio and video regulation
parameter bar dolly moves, to achieve the parameter adjustment.
3.2 Powering On
Boot-strap
If【POWER】pilot lamp off, please follow the operation step by step:
First step: if the power does not plug into, please plug into the power, then the DVR
begin to start, by now, if the
DVR still inactive, to enter the next step;
Second step: turn on the power supply of the DVR
at the back panel, DVR begins to start.
If【POWER】pilot lamp to offer RED, press the 【POWER】key, DVR
begins to start.
The video output mode of DVR ’s the default setting is multi picture channel mode after starting the DVR , if the
time of start the DVR
is in the Timing Recording Setting, the DVR will automatically to start the Timing Recording
function, the corresponding channel’s recording pilot lamp will be light, the DVR is normal operation.
Button
Description
Button
14
Description
Main Menu
PTZ control
Wizard language
Alarm control
Multi channel
Display setup
Recording
Control
Playback
Back up
Exit
If before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk
connection!
Note:
In this dialog you can select language and quickly set various of parameters.
15
3.3 Shutdown
There are two safety mode for Shutdown
Enter【Exit】,select【Power Down】.
Abnormal shutdown
Through the rear panel to shutdown
During the DVR running, directly to turn off the power through the rear panel power switch, please avoid as much
as possible to do it. (specially while the DVR recording).
Directly to pull up the power cable of DVR
While the DVR running, directly to pull up the power cable of DVR, please avoid as much as possible to do it.
(specially while the DVR recording).
Caution: In some area, the power supply is irregularity, it will cause the DVR working not normal-operation, the
DVR will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply.
3.4 Multi Channel
1/4/8/9/16/24/32 preview screen mode switch
3.5 Preview
After log in system of DVR, system will automatically directly enter the preview mode
In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on
16
the picture, re setting the date. There is a alarm input mode icon. (the meaning of every kind of icon as following
table)
Channel picture attention
1
3
Channel is video when channel
video pictures showed this symbol
Channel happen when dynamic
2
test,
channel
video
pictures
showed this symbol
Channel open sound, the channel
video pictures showed this symbol
3.6 Recording operation
Customer can according to select the different kind of recording mode in this system. For the
different kind of recording mode you set, the channel will be showed the mark on everyone channel.
Manual recording
Note: Manual recording operational requirement the user should have “recording” permission.
Please make sure the hard disk drive has been installed and it has been formatted.
1)Input manual recording operation menu
Single click right key of mouse or In main menu=> recording control can into manual recording operation menu.
Under preview mode, press REC key or on the Remote controller unit key into recording control operation menu, as
follows:
2) The explanation of manual recording operation menu
【manual recording】 Priority level highest, no matter currently what status of every channel, after carry out the
manual press, corresponding channel will be record common in progress;
【 Auto recording 】 Setting channel recording by setting condition to record under Timing, Motion detection and
Alarm in Recording Setting;
【Stop Recording】All video channel stop recording;
17
3.7 Playback video
Button
Description
Button
Synchronous/asynchronous play
Description
Voice adjustment
1/4/8/9/16/24/32
frame by frame
screen(switch image)
Speed slow
Hide / display
list
Speed normal
recording date
Speed fast
Play/pause/stop
Sound off/on
rewind
Note:
1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc.
information in the Playback control panel;
2) Can’t same time to select the Fast forward operation function in over 2 channel, only progress in anyone channel;
3) Can drag the Playback Speed toolbar by mouse;
4)In this dialog you can select the video precise to the second.
18
3.8 How to control PTZ
【Zoom】Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control.
【Focus】Slight adjusting the focal length
【Iris】Aperture size adjustment
【Speed】Through the slider adjust rotation stepinterval, yuntai mainly used to control direction operation, the step
length of turning the faster yuntai.
【Preset】Adjust the camera Angle, then direction and the corresponding input and clicking on [ set] button, preset
dots to set the dots in the preset rastelli.
Input presets dots and click on [Transfer] button, the camera will be transferred to the preset point corresponding
position.Click[remove ] button, this presets dianjiang be cleared
【Set】Click 【Start Tour】 the trajectory of said no corresponding, click the 【 add Preset 】 and 【 delete Preset
point 】, 【Clear Tour】 the cruise lines.
【Start Tour】begin to track record, was registered date 【 end Tour】,thus set up from the corresponding track
circuit.
19
【Left Limit】Began to limit scanning Settings, was registered date 【 right Limit 】, thus set up corresponding limit
scanning.
【Add Preset】Add presets point to the cruise lines.
【Delete Preset】Cruise lines from deleting preset points.
【Clear Tour】Remove the cruise line designated.
Note: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
【Control】PTZ Control
【Tour Scan】Point between cruise control.
【Pattern Scan】Track patrol control.
【PTZ Reset】Remove all Settings, original reset to the original state.
【Limit Scan】Yuntai boundary scan control around.
【Auto Pan】Remove the cruise line designated
Note: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
3.9 Alarm control
【Set Alarm】Selection need protection channel, click confirm corresponding channel after in protection status
【Clear Alarm】Remove protection condition, not alarm input to react
【 Alarm Output 】 Open the alarm output.In the premise of no trigger alarm input,user can operate the output.for
example, some alarm switch is connected with a lamp,lamp is open when alarm is trigered
【All】Can choose all the channels
20
3.10 Display Adjust
(1)Video
【Video Effect】Optional: standard, downy, sharp, custom.
【Default】Restoring default effect, for custom video effects, copy standard effect parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(2)Monitor
【Device】Optional: VGA output, TV output etc display output device.
【Default】Restoring default display parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(3)Setup
21
【Device】The first generation of DVR’s optional: VGA output, TV output etc display output devices, the system may
support multiple equipment and output.
The second generation of DVR’s optional:VGA Output+HDMI Output、TV Output.
【Resolution】Setting the resolution of the display device.
The first generation of DVR default VGA resolution is 1024 x 768;
The second generation of DVR default VGA resolution is 1280 x 1024;
Chapter Four Menu Operation Guide
4.1 Recording Setup
(1) Recording Setup
【Channel】Choose the need to install passage "whole" says setting all channels.
【 Image Size 】 CIF/HALF D1/D1,if the model is 960H,the encoding format maybe is 960H/D1/CIF,if the model is
1080P,the encoding format maybe is 1080P/720P, different models,different encoding format
【Encoding Mode】Including fixed bitrate, dynamic bitrate.
【Image Quality】Client-side image quality, the higher the quality the clearer. Choice scope: minimum, low, general,
high, highest
【Frame Rate】Can click on the button manually input, 1 ~ 25 frames per second (PAL) or 1 ~ 30 frames per second
22
(NTSC) continuous adjustable.【Audio】Can select close, open according to requirements
【Pre-Alarm Rec】Can select close, open according to requirements
(2)Channel Overlay
【Channel】Choose the need to install passage "whole" says setting all channels.
【Channel Name】Can manual corresponding input channel's name
【 Channel Display 】 Can choose according to the requirements of users don't use, the top-left corner, left, lower,
middle and downward, upper, right, and lower.
【Time Display】Can choose according to the requirements of users don't use, the top-left corner, left, lower, middle
and downward, upper, right, and lower.
(3)Recording Schedule
【Channel】Choose the need to install passage "whole" says setting all channels.
Each longitudinal row of every seven days a week, said the 24 hours a day manipulated said, mouse the left key
click on the small square footage, setting time to clean it has chosen right-click drag video time.
23
4.2 Camera
When the system starts the camera will detect the format of video
(1) PTZ Setup
【Channel】Choose regional channels, yuntai Settings "whole" says setting all channels
【PTZ Protocol】Yuntai equipment communication protocol
It contains these options:Pelco_D、Pelco_P、LILIN、MINKING、STAR、VIDO、NEON、DSCP、HY、N-control、
RM110、SAMSUNG,the default option is Pelco_D.
★Note:
yuntai parameter Settings every channel need after completion in Settings of gc1318 alone.
【PTZ Address】Yuntai equipment address, digital range 0 to 255.
★Note:
here with the address must be consistent ball machine address, we can't control the ball machine.
【Bit-rate】Yuntai equipment baud rate.
(2)Video Setup
24
【Video Mode】Provide PAL and NTSC both formats video formats choice, modify after you must restart your system
can take effect.
【Channel】Choose to set the video Settings area passage "whole" says setting all channels
【Reserved Section】Click Settings enter. The white areas for privacy area
【Buzzer Alarm】Happen when video lost choice whether or not to allow buzzer warning
【Alarm Output】Happen when video lost upcoming linkage selected channel corresponding alarm output
(3)Motion Detection
【Channel】Choose need to set up mobile testing area passage "whole" says setting all channels
【Sensitivity Setting】Can be set to give: minimum, low, general, high, highest
【Detection Area】Click Settings enter.
Green area for dynamic test, grey areas design.ferroconcrete-brick undefended area for. Press the mouse left key to
drag on the lower detection area to the right, press the mouse button clearance. Detection area drag The save and
exit button can save Settings, some give up and quit button abandon modification.
【Buzzer Alarm】Occur when dynamic test on the buzzer whether to allow the alarm
【Trigger Recording】That will happen when dynamic test on the linkage of selected channel fast ball trigger video
【Alarm Output】In this passage setting user can be copied to the other channels, fulfill the same dynamic detection
alarm Settings
25
4.3 Network Setup
(1)General Setup
【DHCP】After checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS
server, etc
【UPnP】Can choose according to the requirement
【IP Address】Network logic address can according to the requirements set
【Subnet Mask】Server subnet mask
【Default Gateway】Server gateway
【DNS Server】DNS server addresses
【Server Port】Data port, initial socket for 7777
【HTTP Port】the default port for 80. If change, when using IE browser, need to monitor the IP address, adding new
socket. If use IP address to 82, from the original browsing http://192.168.0.19, change for http://192.168.0.19:82.
26
【Handset Port】Network phones socket, initial socket for eight thousand eight hundred and eighty eight
(2)Dial-UP Setup
Tip: PPPoE dial-up successful, according to
【 PPPoE IP 】 shown on IP address, users can remote access
hard disk video recorder. By nic LAN IP access.
The dvr support model:
Unicom:huawei E173,zhongxing MF100
Telecom:huawei EC150.huawei EC156.zhongxing MF583
“3G DIAL” have two modes with automatic and manual dialing, the operation follows as below.
1.
Automatic Dialing
Select the Automatic Dialing in the interface of the following picture, fill the right information according to the
operator where the 3G card belongs to and the 3G referred guide, It includes IPS names, AP, dial-telephone, ID and
password, the interface shows as the other following picture (some IPS once be chosen, the other relative
information has been already done, so you needn’t fill any more, click “SAVE” directly). Then click “Save” directly.
After having detected the 3G signal when DVR start, the system will dial up automatically.
2.
Manual Dialing
In the interface of following picture, users would fill the right information in the menu bar as same as
Automatic dialing and click “SAVE”. Then click “Dial-up” after saving successfully (The referred information
would be saved still after the DVR restart, but you should click “Dial-up” again).
In these two modes, if the dial-up want success, first you should make sure that the 3G card is available. Since
the 3G signal has been existed, the related menu bar will show the correct IP address; if failed, system will popup a
window to show the wrong information.
27
(3)DDNS Setup
【 DDNS
Service
】
Dynamic
DNS
provider
website,
Via
DDNS
server,
it
compatible
with
SODDNS,ANYVISION,PANSIM, DYNDNS.ORG.if you select soddns, you can customize your favorite domain
name.it shows as following picture.
28
【DDNS Domain】Dynamic domain name, soft keyboard and hard keyboard can be input.
【DDNS Account】Login domain name service provider website user name
【DDNS Password】Login domain name service provider website password
Tip: through the dynamic DNS server. Support dynamic DNS.
(4)Email
【SSL Protocol】Sending E-mail in use safety network connection
【Test Email】Send an email to the recipient mailbox test
【Email Address】The recipient's email address. Users can input two different email address.
【Send Email】The sender email address .
【SMTP Server】Send mailbox mail server
【Email Account】The sender email address the corresponding account
【Email Password】The sender email address of the corresponding email password
29
According to the customer request can be checked 【Video Setup 】and 【 Motion Detection 】 sending emails.
Two can also choose.
Note: your sender email must support SMTP.
(5)P2P Setup
The specific operation of P2P, refer to the eighth chapter “ The cloud function”
(6)Access Control
【List Rule】According to the requirement to choose: don't use, allow access, refused to visit.
【Starting IP】Display IP address started section
【Ending IP】Display IP address end segments
【Add】On the basis of the need for added
【Delete】According to the need to delete
30
4.4 System Setup
(1)Time
【 System Language 】 Used in a remote remote device control more hard disk video recorder occasions, only in
remote controls address and hard disk video recorder Numbers identical to remote operation.
【Device Number】According to the requirement to select the time zones, has twenty six time zone for user Settings.
【Time Zone】Select the format the date is displayed in including date, sun and moon June 21 years in three formats.
【Date Mode】To choose time display modes include 24-hour system and 12 hours to make
【System Date】The current system date
【System Time】The current system time
【Daylight-saving mode】According to the requirement to choose
【Set Time】Confirm modification system of time
(2)HDD Management
31
【Disk Full】When video disk full system how to deal with, "said system will be automatic coverage the earliest video
files continue covering video," stop video "says system to stop the current video.
【File Time】Says automatic generation video files interval, the set range 5-120 minutes.
【Recording Bit-rate】Said the total rate of current coding
【Recording Time】Said the storage devices systems installed in accordance with the current bitrate can store video
of time.
Display the current hard disk attributes: types, hard disk, usable capacity total capacity. Click [formatting ], all
storage file will be lost.
Tip: to format the hard disk before please stop system current all those videos.
(3)User Management
【User】Characters in length up to 8 bytes, ignore trailing Spaces. Can be letters, Numbers, and other symbols. The
32
user has the largest number of eight, user name may not be repeated.
【User Rights】According to the requirements set of functions need checked
【Add User】Input need to add user, and input the account password and passwords. According to save button to add
user.
【Delete User】Select the users need to delete, and click on the "yes" button to remove users
【Edit User】Choose need to modify user, and in user permissions bar needed under the function of check. According
to the save button modified users.
【Edit Password】Select the account, input to modify current user password, and enter the account password and
confirmation password new. According to the save button for password changing. The password can be set to 0 ~ 8
bits
(4)Alarm Setup
【Alarm Input】Choose corresponding alarm channel, "all" setup all channel said.
【Input Type】Alarm input to often open/closed type choice (voltage output style)
【Clear Alarm】Stop the current alarm video and alarm output, but not removal, can again trigger alarm.
【PTZ Relate】When will the linkage happened alarm yuntai control
【Trigger Recording】When will trigger happened alarm selected channel video.
【Alarm Output】When will the linkage happened alarm corresponding alarm output
(5)Output Management
33
【Buzzer Output】In the chosen time intervals have alarm input will start buzzer output.
【Send Email】In the chosen time intervals have alarm input which will send relevant information, such as the alarm
events, paparazzi pictures, equipment name, device ID, etc sent to user specifies the mailbox.
【Alarm Output】In the chosen time intervals have alarm input will start alarm output
(6)Margin Adjust
By the function, you can adjust the distance between the display device and the picture edge.
4.5 System Management
(1)System Upgrade
34
Show the system hardware versions, software version, release dates. Click [software upgrade 】, the system
began to automatically detect and upgrade file.
Note: equipment currently support upgrades: local USB mode, IE mode, the client software.
USB mode: former ensure USB device to connect upgrade normal, as upgrade program has
copy USB
devices in the root directory. According to the interface can upgrade operation hints.
Upgrade was successful, and the screen appears to restart operating hints. Equipment reboot after system that
will enable the new software.
(2)Log Search
【Date Search】Can search according to date
【Log Type】Optional: all, operation log, set diaries, alarm log, error log
Note: according to the left, right arrow can move forward and content.
35
(3)Default
Restoring default can restore selected according to need. The system restore to the default configuration state
out, can according to the menu options choose to restore the corresponding Settings.
Tip:
menu color, language, time date format, video format, IP address, the user account, etc will not be
restored.
(4)Exception Handling
36
【Exception Type】Choose abnormalities: hard disk full, hard disk errors, network connection.
【Buzzer】When abnormality, choose whether to allow the buzzer hints.
Chapter Five IE Preview
5.1
logging on interface
To input the IP address
Pretermission IP address is 192.168.0.20
37
5.2 System Settings
Point
, As the picture ,You can set up language directory,After all to save you set.
38
39
40
5.3 State control
In state control you can set reboot server, close server , remote to go up
Remote upgrade: let PC file load in the system
Log: to inquire sometime the server’s action
41
42
43
Chapter Six
Asee series phone software for use
6.1 Asee
This module has mainly instructions on the installation and usage in Android, Blackberry, iPhone mobile phone.
1) The acquisition of client software:
The client software can be got from the CD material equipped with CD , then choose English and select the options
supporting tools, finally choose the mobile phone monitoring or obtained from technical support. Each type of
corresponding client software as follows.
1. Asee.apk: The smart phone monitoring client of Android operating system
2. ASee.cod & ASee.alx: The smart phone monitoring client of BlackBerry operating system
3. ASee.sisx: The smart phone monitoring client of Symbian operating system
Notes:
44
 The mobile phone client of apple mobile phone system (iOS)can be directly searched for ASee+ in the appstore
and installed online.
 The mobile phone client of Android system can be directly searched for ASee+ in the Android market and
installed online.
2) The main functions of the program which is straight even version of current mobile phone monitoring are shown as
follows:
1. Browsing real-time video function. In addition to BlackBerry, it can support four pictures at the same time preview.
2. PTZ control function (the controlled ball machine is in front).
3) The instructions of three platforms is shown as follows.
1. Android
2. Blackberry
3. iPhone
4.Symbian
6.1.1 Instructions of Android
6.1.1.1
Essential condition
1) Support the version 1.5 or above of Android system.
2) Support DVR platform versions:
 Hisilicon v1.0.1.8 and higher.
 GRain v8.33 and higher.
6.1.1.2 Installation and operation instructions
1)Installation
Support two installation modes and the user can choose one way for installation.
1. Install online
Search ASee+ on google market and install online. As the below image shows:
45
2. Install offline
Copy the Asee.apk installation package to Android phone through cable. In the specified directory find out the
corresponding .apk, click the application installation (If there is not installed apk installer in the mobilke phone, the
user needs to download an apk installation software so that it can identify the apk package), and there will be
program icons after finishing installing. As the above image shows.
3)Click the program icon
<Asee+>,the first screen after running is shown in the below image.
46
The functions of buttons show as follows:
Table 1-1
Function keys
Definition
Function specification
Play
When the program connects with device, play video
Capture the current screen(the default save path: the default pictures
Capture
directory of mobile)
Set some information of the device, such as IP address, dynamic domain
Settings
name, port, username, password and device alias information.
About
Some device information of the software
Previous group
It can show the previous channels group.
Next group
It can show the next channels group.
Choose one video channel of the device. And cooperate with "next
Select channel
group" can switch the 8 or 16 channels.
PTZ control
PTZ direction control including up, down, left and right.
Zoom
Zoom in/out control of PTZ.
Focal length
Focal length adjustment of PTZ.
Aperture
Aperture control of PTZ.
4)If it is first running or need to change the parameters, please click the <settings> button
<Device List> page, as shown in the below image.
47
and enter the
In <device list>interface, click <Add> button
and enter <settings> interface, as shown in the above image
Notes:

<DVR Title>:It is convenient to identify among multiple devices.

<Server>:The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping
before using public IP and mobile phones need to open wifi before using LAN IP).

<Port>:The mobile port set in DVR(default parameter is 8888).
 <User Name>:The username permitted to login the DVR(default username is ‘admin’).

<Password>:The password of the user (default password is empty).

<Max Channel>: The actual channel numbers of DVR.
5)After finishing, click <OK>and enter the
Device List page. As shown in the below image
48
Notes:
<Back>:Back to the screen of previewing image.
<Channel List>:It shows the corresponding DVR and the default channel list, the user can arbitrarily
choose a channel to preview image.
<Information Edit>:Click this button and enter the “Settings” interface, you can editor delete the device
information, as shown in the above image
6)Complete settings, choose channel to preview, and the preview function include two modes: common mode and
full screen mode.
1. Common mode is shown in the below image
49
2. Full screen mode is that when mobile phone lay down horizontally it will automatically switch to full screen mode,
as shown in the above image
7)Channel switch function
Select some channels in the Device List interface, the program will automatically switch to the Preview Interface and
open the corresponding channel preview in Preview Interface. Program displays the default 1 ~ 4 channels, if the
user clicks the channel button
of Next Group in the Preview Interface, the channels group will switch to 5 ~ 8,
8 ~ 12, 12~16 and circulation switch. As shown in the below image
50
6.1.2 Instructions of Blackberry
6.1.2.1 Essential condition
1) Support the version 4.6 or above of Blackberry system, and mobile phone screen resolution is 480*360 and
480*320.
Support 8900, 9000, 9700, 9630, 9900 of Blackberry.
2) Support DVR platform versions:
Hisilicon v1.0.1.8 and higher.
GRain v8.33 and higher§2.2 Installation and operation instructions
6.1.2.2 installation
1)Install ASee. cod and ASee. jdp installation package into Blackberry handset through the desktop manager,
as shown in the below image.
2)Click the options on mobile phone desktop and enter the interface of the above image.
3) <Asee> permission settings
a. Click <application program> to find out
<Asee>;
b. Click the icon of <Asee> and enter the permission settings.
c. Click <edit permissions>, set all permissions <permit>.
Note:Some permissions can not be set <permit>( the gray options mean cannot
change this option), and
click “save”.
4)Enter the initial interface
Click the program icon
<Asee>, after running procedure there will be an welcome page, then enter the initial
interface, as shown in the below image.
51
Notes:
<Title>:It is convenient to distinguish between multiple devices.
 <Address> : The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping
before using public IP and mobile phones need to open wifi before using LAN IP).
<Port>:The mobile port set in DVR(default parameter is 8888)
.
<Channel total>:The actual channel number of DVR.
<User ID>:The username owens view permissions of mobile phone(default username is admin).
<Password>:The mobile phone port of DVR (default password is empty).
<Network type>:Choose the network type that you need.
The corresponding functions of buttons show as follows:
Function keys
Definition
Function specification
Enter the playing interface, and the program will connect with device and
login
begin to play video
exit
Device list
Exit the program
Enter the device list interface.
5) Click <login>, play the main interface, as shown in the below image.
52
The corresponding functions of buttons in <Main interface> show as follows:
Function keys
Definition
Play
Full screen
Function specification
When the program connects with device, play video
Play full screen.
Capture the current image (the default save path: the default pictures
Capture
directory of mobile)
About
Next group
Some device information of the software.
It can select the next channels group (1-4、4-8、8-16) or PTZ control.
Choose one video channel of the broadcasting device and select any
Select channel
one of 8 channels.
Up control of PTZ
Down control of PTZ
Left control of PTZ
Right control of PTZ
Zoom in
The up direction control of PTZ.
The down direction control of PTZ.
The left direction control of PTZ
The right direction control of PTZ
The zoom in control of PTZ.
53
Zoom out
Focal length +
Focal length -
The zoom out control of PTZ.
Amplify the focal length of PTZ.
Lessen the focal length of PTZ.
Aperture +
Amplify the aperture of PTZ.
Aperture -
Lessen the aperture of PTZ.
6) Exit the application program
Click the button <Exit> and exit the program, as the below image shows.
7)
Edit the <Device List> interface
1. Click the <Device List>and enter <Device List> interface, as shown in the above image.
2. Click the <menu> button and enter the <device edit> interface, as the below image shows.
The corresponding functions of buttons in < device edit> interface show as follows:
54
Menu definition
Set to real-time preview
New Device
Edit
Delete
Delete All Records
Shutdown
Function specification
When the program connects with device, play video.
Create a new record.
Edit record.
Delete the selected record.
Delete all records.
Shut down the program.
6.1.3 Instructions of iPhone
6.1.3.1 Essential condition
1) Support the version iOS 3.0 or above, and mobile phones includes iPhone, iPod, touch etc.
2) Support DVR platform versions:
 Hisilicon v1.0.1.8 and higher.
 GRain v8.33 and higher§2.2 Installation and operation instructions
6.1.3.2 Installation and operation instructions
1)Run the App Store program of iPhone
Switch to the search tag page, and input Asee + in the search box to find the application installation package, then
click <install> .After finishing installation, there will be Asee + program icon on the mobile phone desktop, as shown in
the below image.
55
2)Click the program icon Asee+ and the initial interface after running procedure is shown in the above image.
The corresponding functions of buttons show as follows:
Function keys
Definition
Function specification
Stop
When the program disconnects with device, stop playing the video.
playing
Capture the current image (the default save path: the default pictures
Capture
directory of mobile).
Set some information of the device, such as IP address, dynamic domain
Settings
name, port, username, password and device alias information.
Channels group switch
About
It can switch to next channels group.
Some device information of the software.
Choose one channel video of the broadcasting equipment. And cooperate
Select channel
with "next group " can achieve the switch of 8ch and 16ch.
PTZ control
PTZ direction control including up, down, left and right.
56
Zoom
Focal length
Aperture
Zoom in/out control of PTZ.
Focal length adjustment of PTZ.
Aperture control of PTZ.
3)Initial usage of need to change the parameter
1.Please click
the settings button
and enter the device manage interface, as shown in the below image.
2.Then select Add button and enter device add interface, as shown in the above image.
Notes:
<Device Name>:It is convenient to distinguish between multiple devices.
<Address> :The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped
before using public IP and mobile phones need to open wifi before using LAN IP).
57
<Port>:The mobile phone port set in DVR(default parameter is 8888).
<User ID>:The username permitted to login the DVR(default username is ‘admin’).
<Password>:The password of the user (default password is empty).
<Max Channel>:The actual channel number of DVR.
3.After finishing, click <OK>, enter <Device Manage> interface. As shown in the below image.
4.In the <Device Manage> page, click the <back> button, enter the <add channel> interface, then click the <+>
button
, as shown in the above image.
5.Click the <+> button
, and switch automatically to <Device List>, as shown in the below image.
58
6.Click the button
to view all channel numbers, as shown in the above image.
7.Double click any channel, then switch to the <channel preview> interface to preview channels, it can support four
channels previewing at the same time, as shown in the below image.
8.Click the <settings> button
enter the <Device Manage> interface, as shown in the above image. The user
can edit, modify and delete device information by clicking the corresponding icon or slipping the item.
(1)Click the <edit> button
enter <parameter modifying> interface, as shown in the below image.
59
(2)Slide rightly the <edit> button
to delete the information. As shown in the above image.
4)Video display mode
There are two modes: common mode and full screen mode
Switch: when the mobile phone lay down horizontally it will automatically display full screen.
common mode
full screen mode
5)Channel switch function
Select some channels in the Device list interface, the program will automatically switch to the Preview Interface and
open the corresponding channel preview in Preview Interface. Program displays the default 1 ~ 4 channels, when
60
elected the channel <Channel switch> button
in the <preview interface>, the channels group will switch to 5
~ 8, 8 ~ 12, 12~16 and circulation switch. As shown in the below image.
6.1.4 Instructions of Symbian
6.1.4.1 Essential condition
1) Support the version OS S60 or above of Symbian system.
2) Support DVR platform versions:
•
Hisilicon v1.0.1.20 and higher.
•
GRain v8.42 and higher.
6.1.4.2 Installation and operation instructions
Installation
Support two installation modes and the user can choose one way for installation.
1.Install online
Search ASee on google market and install online.
2.Install offline
Copy the Asee.sisx installation package to Symbian phone through cable. In the specified directory find out the
corresponding .sisx, click the application installation (If there is not installed apk installer in the mobile phone, the
user needs to download an apk installation software so that it can identify the sisx package), and there will be
program icons after finishing installing. As the following figure shows.
61
2)Click the program icon
<Asee>,the first screen after running is shown in the following figure
click PTZ show as the following figure
The functions of buttons show as follows:
Function keys
Definition
Play/pause
Function specification
When the program connects with device, play video
62
Capture the current screen(the default save path: the default pictures directory
capture
of mobile)
Set some information of the device, such as IP address, dynamic domain name,
settings
port, username, password and device alias information.
Full screen
pervious/next
exit
For this channel full screen.
Pervious to the former channel,next to the latter channel
quit current software
Choose one video channel of the device. And cooperate with "next group" can
Select channel
switch the 8 or 16 channels.
Ptz
PTZ control
zoom
Focal length
Aperture
PTZ
PTZ direction control including up, down, left and right.
Zoom in/out control of PTZ.
Focal length adjustment of PTZ.
Aperture control of PTZ.
3)If it is first running or need to change the parameters, please click the <settings> button
<Device List> page, as shown in the following figure:
63
and enter the
Notes:
1)<server address>:The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped
before using public IP and mobile phones need to open wifi before using LAN IP).
2)<port>:The mobile phone port set in DVR(default parameter is 8888).
3)<uer ID>:The username permitted to login the DVR(default username is ‘admin’).
4)<password>:The password of the user (default password is empty).
5)<alias>:the record’s name
After entering the above information, identify and select play.
64
图 6-79
Chapter Seven
Instructions of imac
7.1 Essential condition
1)Support the version OS X 10.6.3 or above of imac system.
2)Support DVR platform versions:
a)
Hisilicon v1.0.1.20 and higher.
b)
GRain v8.42 and higher.
7.2 Installation and operation instructions
One method:
To unzipped the Asee.app in windows xp os, copy it to the mac machine.and then you will find the icon.
The other method:
Download from App Store,Search for Asee ,find the corresponding program installation package (Asee.apk
installation package), install online.After finishing installation, as the following figure shows:
7.2.1 operation instructions
After installing,click Asee icon to work.
Log on the main menu interface,as the following figure shows
65
main menu interface
After loading,enter default main menu interface,buttons instruction as show below:
buttons instruction
Button icon
corresponding definition
function introduction
single picture
Single picture shows video channel
4 pictures
4pictures show video channels
disconnect
disconnect
Capture
disconnect single picture of connection
disconnect all pictures of connection
Capture the current image (the default save path: the default
pictures directory of mobile).
full screen
Picture full-screen
66
add
add device
delete
Delete device
modify
Modify device
Switch pictures on Imac platform,click view->scream mode on the top of the screen to switch pictures from 1/4/9/16,
as the following figure shows:
picture switch
First login ,preview interface is empty, need to set parameters and add device,after adding device, can preview,
configuration, modify or delete equipment information
click “add
ect.
”,pop-up a message box as shown in the follong figure:
add device
The current message box shows the need to enter five information: device name、IP address、port、user ID and
password.
67
Device name:the name of monitor device,help you distinguish between multiple devices
IP address:The public IP address or dynamic domain name of DVR(here the address must be internet address)
port:The mobile phone port set in DVR,default parameter is 8888
User name:default username usually to be ‘admin’,can be set according to the DVR .
Password::admin user’s default password is empty,can be set according to the DVR.
add device
after inputting above information , click“ok”.enter main menu interface,click a picture,after appearing green
frame(as shown window 1 in picture below),click a channel on right channel column(such as channel 1
play,as shown in the following figure
68
),connect
connection play interface
If there is error device information above,click
to modify or click
,add the device again.
Note:Asee on Imac platform can only add one device,and there is no PTZ control function.
Chapter Eight
The Cloud funtion
8.1 DVR Setup
1.Main Menu Network Setup P2P Setup
69
Click the button”Registration”
If there is no network, it will prompt”Registration failure”;
If you have access to the Internet, it will prompt " registration is successful!”;
70
Click the button “OK”.If success,you will see the following picture.
Note:If use the function of P2P, you’d better not use the function of “DHCP”,At the same time to ensure that the IP
address is a network IP address , and different with the others..
71
8.2 PC Setup
1.Opne IE, type http://www.soddns.com in the address bar, and then press enter.
If this is the first landing, you should download the control according to your pc system. If the system is xp, click
the button “XP DownLoad”; if the system is windows 7,click the button “Win7 DownLoad”. Or let your pc to test and
download itself, this maybe takes much more time.
The detail of it
72
Click the button “Run” or “save”;
Click the button “Run”;
73
Click the button “Next”;
Click the button “Install”;
74
Click the button “Finish”;
Note: If finish, you should reboot the pc.
75
★Domain Name /Device ID:you can look up the device id of this dvr ,above device’s id is 10257027;
★Net Port:5050;
★DVR Username:admin;
★Password:null;
Note:the username and password are the same as the local DVR’s
2.Type the information, and then click the button”login”;
76
If you want to view all the channel ,you can view one by one ,or view all the channel by click the button”start”;
8.3 The other operation of PC
8.3.1 User Login
77
(1) local login
★
Logout: logout the current user
★
Cancel:cancel the operation
(2) cloud login
★
Username: The account can manage multi device ID
★
Password: Manage user password
★
Auto-login: when you select this option, open www.soddns.com, automaticlly login
★
Regist: Here you can get the account, the user can follow the prompts to register
78
Registration page
Successful registration information
8.3.2 Server List: shows the currently logged in equipment
8.3.3 Device Manager
79
★
DEVICE NAME: The name of the device
★
NET ADDRESS: Enter the ID of the device
★
NET PORT: Default 5050
★
MOB PORT: Default 8800
★
DEV PORT: Default 5040
★
USER: Default admin
★
PASSWORD: Default null
★
DEVICE TYPE: According to the actual type of the device,such as DVR
★
CHN COUNT: The number of channels
8.3.4 Remote Control:control the PTZ
80
8.3.5 Remote Output Control
8.3.6 Remote Color: you can adjust the color of each channel,you will see it in the following picture
★Default: Set the current color to the initial values
81
8.3.7 Remote Playback
★Type: it include “All”,”Manual”,”Auto”,”Alarm”
★Chn: slecet the playback channel
★Search: search the files and display the results
★Hide: hidden the file directory
★Show FileList: shows the last retrieved file derectory
82
★Playback: double click the file, and then playback
★ Backup: In the file list, select one file, click the right mouse, then click backup, it will pop-up “Save as ”
dialog.
83
8.3.8 Window Select:you can switch between the single-screen, four, nine, siteen images
84
8.3.9 Taskbar
85
Chapter nine The use of P2P phone software Nvplayer
This manual has mainly instructions on the installation and usage in Android and iPhone mobile phone.
1) The acquisition of client software:
The client software can be got from the CD material equipped with CD . Each type of corresponding client software
as follows.
a) NVPlayer.apk: The smart phone monitoring client of Android operating system
b) NVPlayer.ipa: The smart phone monitoring client of IPhone operating system
2) The main functions of the program which is straight even version of current mobile phone monitoring are shown as
follows:
1.Browsing real-time video function.
3) The instructions of two platforms is shown as follows.
1. Android
2.IPhone
9.1
instructions of Android
9.1.1 Essential condition
1)
Support the version 1.5 to 4.2 of Android system.
2)
Support DVR platform versions:
a)
The first generation of the dvr : V1.0.1.51 and higher.
b)
The second generation of the dvr : V2.0.0.40 and higher.
9.1.2 Installation and operation instructions
Installation
Now can support two installations mode for installation.
86
1. Install offline
Copy the NVPlayer.apk installation package to Android phone through cable. In the specified directory find out the
corresponding .apk, click the application installation (If there is not installed apk installer in the mobilke phone, the
user needs to download an apk installation software so that it can identify the apk package), and there will be
program icons after finishing installing. As the following picture shows.
2. Install online
Search Nvplayer on google market and install online. As the following picture shows:
87
1)Click the program icon
<NVPlayer>,the first screen after running is shown in the following picture.
Notes:
<Add>: Here you can add multiple devices.
<Edit>:Here you can edit the devices,such as delete one device in the server list.
<Login>:Some devices landing.
88
<Search>:Search mobile devices within the lan, currently only supports searching IPC.
<Server List>:Display the current list of the servers that have been added.
and enter <Add Device> interface, as shown in the
2) In <server list>interface, click <Add> button
followong picture.
Notes:
<Name>:Name easy to distinguish multiple devices,name can be the same as the server.
<Server>:In the P2P interface of the DVR, click the button “registration”, it will create one device ID, you can
copy the ID to here.
<Port>:The default port is 8800,do not modify.
<User Name>:The username permitted to login the DVR(default username is ‘admin’).
<Password>:The password of the user (default password is empty).
3)
Setting is completed, click <Save> button,you will see the Server list interface.
89
4)
Click one of them, it will show the following picture.
The functions of buttons show as follows:
Function keys
Definition
Pause
Function specification
When the program connects with device,
Esc
Go to the previous level.
90
pause video
Previous group
Next group
It can show the previous channels group.
It can show the next channels group.
Choose one video channel of the device. And cooperate with "next
Select channel
group" can switch 5-8,9-12,13-16 and so on.
9.2
instructions of iPhone
9.2.1 Essential condition
1)Support the version ios4.3 to ios6.1 of IPhone system.
2)Support DVR platform versions:
a)
The first generation of the dvr : V1.0.1.51 and higher.
b)
The second generation of the dvr : V2.0.0.40 and higher.
9.2.2 Installation and operation instructions
Installation
Now can support two installations mode for installation.
1. Install offline
Copy the NVPlayer.ipa installation package to Iphone mobile through cable. In the specified directory find out the
corresponding .ipa, click the application installation, and there will be program icons after finishing installing. As
following picture shows.
91
the
2. Install online
Run the App Store program of
iPhone.
Switch to the search tag page, and input Nvplayer in the search box to find the application installation package, then
click <install> .After finishing installation, there will be Nvplayer program icon on the mobile phone desktop, as shown
in the above picture.
1)Click the program icon
<NVPlayer>,the first screen after running is shown in the following picture.
92
Notes:
<Add>: Here you can add multiple devices.
<Edit>:Here you can edit the devices,such as delete one device in the server list.
<Login>:Some devices landing.
<Search>:Search mobile devices within the lan, currently only supports searching IPC.
<Server List>:Display the current list of the servers that have been added.
and enter <Add Device> interface, as shown in the
2) In <server list>interface, click <Add> button
following picture.
93
Notes:
<Name>:Name easy to distinguish multiple devices,name can be the same as the server.
<Server>:In the P2P interface of the DVR, click the button “registration”, it will create one device ID, you can
copy the ID to here.
<Port>:The default port is 8800,do not modify.
<User Name>:The username permitted to login the DVR(default username is ‘admin’).
<Password>:The password of the user (default password is empty).
3) Setting is completed, click <Save> button,you will see the Server list interface.
94
4)
Click one of them, it will show the following picture.
The functions of buttons show as follows:
Function keys
Definition
Function specification
95
Pause
When the program connects with device,
Esc
pause video
Go to the previous level.
Previous group
It can show the previous channels group.
Next group
It can show the next channels group.
Choose one video channel of the device. And cooperate with "next
Select channel
group" can switch the 9 to 16 channels.
Chapter Ten FAQ (Frequently Asked Questions)
01:Why the DVR did not run after connect the power supply?
①Please check the power switch turn on or off at the rear panel of DVR.
②Please check if the turn on DVR operation correct or not?
③If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W)
02:Still stop over on the boot-strap frame?
Physical damaged in hard disk drive
Boot manager abnormal.
03:Why does appear the boot running too slow?
①There are too much capacity data in hard disk drive, the system will automatic search the data when
the system boot up, caused the boot
running slow.
② The hard disk drive error will cause the system research the data repeatedly, caused the boot
running slow.
04:Why does the system reboot repeatedly?
①Check the hard disk drive, if there is not the FAT32 formatted in it or the problem in it and caused the
96
DVR reboot;
② Please check the power supply of DVR, if you installed a lot of hard disk drive, it may be reboot
repeatedly underpower;
③ Please pull up the network cable, then to check the DVR can work normally or not, being the
catastrophe failure in network,
it will cause the DVR reboot repeatedly;
05:Why does the system halted of DVR during the playback and search the video file information in progress?
Please check if you install the hard disk drive or if the drive is ok or not? Please replace the good one
for it soon;
If the ambient temperature on the high side or not?
Is there any heaven current installation surrounding and external video device, heavy current surging
video cable, caused the DVR can not work properly and the system halted;
06:Firmware upgrade failure?
U drive is not good compatible with the DVR, cause the DVR can not detected it, suggested to try one
or two more different kind of U drive in the market;
USB interface is not good;
The voltage hunting fearfulness during the system firmware upgrade in progress;
07:Why the display color is black and white in TV and VGA monitor?
Check the video system is it matching the video input, DVR, TV or VGA monitor, if there is not on all
fours, please set the video system mode in auto automatic recognition;
08:Why does nothing display on the TV or VGA monitor?
①please make sure if the power supply of TV or VGA monitor turn on or not; if the illumination located
in the lowest status?
②if the video connected with TV or VGA monitor properly? Check if there is any video signal input?
And make sure the line faulty or not?
09:Why does the video like water wave, to appear obstruction distortion?
①if there is short circuit, open circuit or insufficient solder and connection failure of video cable?
② If the video cable obstruction by high voltage interference, please separate the video and high
voltage in linkup cabling, at the meantime, please select the better quality, shield video cable for the project;
③In the whole system, only select the central point to grounding, please do not multi port to grounding,
then, cause the common mode obstruction, please connect the screw in DVR rear panel to grounding;
④Check if there is the become old problem in the camera or TV monitor and cable?
10:Why do the color of live video and record video data distortion?
①Make sure the input and output video parameter of main menu setting correct;
②Make sure the connection is correct;
11:Why does the video skew became deformed, color cast?
①Make sure the VGA cable and DVR be connected with grounding properly;
② The DVR working atmosphere temperature high, or no good in radiating, cause the VGA chipset
working exceptional, or the mention circuit parameter is abnormal;
12:Why does the record video playback in mosaic under local DVR?
①The recording parameter setting is too low cause the record video quality overall down, sometime
appears to mosaic;
97
②The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic
raising;
Postscript 1
D1、CIF models Product
4CH
parameter Table
8CH
Compress
Video out
Picture standard
24CH
32CH
H.264 baseline [email protected]
standard
Video in
16CH
BNC
BNC
BNC
BNC
BNC
(1.0Vp-p/75Ω)
(1.0Vp-p/75Ω)
(1.0Vp-p/75Ω)
(1.0Vp-p/75Ω)
(1.0Vp-p/75Ω)
1TV BNC
1TV BNC
1TV BNC
1TV BNC
1TV BNC
(1.0Vp-p/75Ω)/
(1.0Vp-p/75Ω)/
(1.0Vp-p/75Ω)/
(1.0Vp-p/75Ω)/
(1.0Vp-p/75Ω)/
1VGA
1VGA
1VGA
1VGA/1HDMI
1VGA/1HDMI
PAL(704×576),
PAL(704×576),
PAL(704×576),
PAL(704×576),
PAL(704×576),
NTSC(704×480)
NTSC(704×480)
NTSC(704×480)
NTSC(704×480)
NTSC(704×480)
1024x768/800x
1024x768/800x
1024x768/800x
1024x768/800x
1024x768/800x
600/1280x1024
600/1280x1024
600/1280x1024
600/1280x1024
600/1280x1024
D1/HD1/CIF
D1/HD1/CIF
D1/HD1/CIF
D1/CIF
CIF
4ch
8ch
16ch
24ch
32ch
PAL:1~25P/S;
PAL:1~25P/S;
PAL:1~25P/S;
PAL:1~25P/S;
PAL:1~25P/S;
NTSC:1~30P/S
NTSC:1~30P/S
NTSC:1~30P/S
NTSC:1~30P/S
NTSC:1~30P/S
Audio in
RCA×4
RCA×4/RCA×8
RCA×4/RCAX16
RCA×8
RCA×8
Audio out
RCA×1
RCA×1
RCA×1
RCA×1
RCA×1
Audio encoded
ADPCM
ADPCM
ADPCM
ADPCM
ADPCM
32Kbps
32Kbps
32Kbps
32Kbps
32Kbps
4E
4E
4E/8E/16E
16E
16E
1CH
1CH
1CH/4CH
2CH
2CH
resolution ratio
Record encoded
Record play
Roll rate
Audio encoded
rate
Alarm In
Alarm Out
Record mode
Manual record,
Manual record,
Manual record,
Manual record,
Manual record,
motionrecord and
motionrecord and
motionrecord and
motionrecord and
motionrecord and
externa alarm
externa alarm
externa alarm
externa alarm
externa alarm
98
Mult
mode
Hd interface
Network
interface
record
record
record
record
record
Record,Play,
Record,Play,
Record,Play,
Record,Play,
Record,Play,
Internet
Internet
Internet
Internet
Internet
HDMI:
HDMI:
HDMI:
HDMI:
HDMI:
1080P(1920*108
1080P(1920*108
1080P(1920*108
1080P(1920*108
1080P(1920*108
0)
0)
0)
0)
0)
RJ45(10M/100M)
RJ45(10M/100M)
RJ45(10M/100M/
RJ45(10M/100M/
RJ45(10M/100M/
1000M)
1000M)
1000M)
ASEE: symbian、Android、iphone、Blackberry and so on;
Mobil platform
Nvplayer:Android,iphone and so on.
RS485
PTZ control
PTZ control
PTZ control
PTZ control
PTZ control
Communication
RS485×1,
RS485×1,
RS485×1/2,
RS485×1/2,
RS485×1/2,
USB2.0×2
USB2.0×2
USB2.0×2
USB2.0×2
USB2.0×2
port
Hard Disc
USB interface
Remote control
Power adapter
Working
temperature
Working
humidity
Product size
(mm)
Product weight
SATA×1/2
SATA×1\2
2/4SATA
2/4SATA
2/4SATA
(maximum 4T)
(maximum 4T)
(maximum 4T)
(maximum 4T)
(maximum 4T)
Usb mouse,Usb
disc backup、usb
mobile hard disk
Usb mouse,Usb
disc backup、usb
mobile hard disk
Usb mouse,Usb
disc backup、usb
mobile hard disk
Usb mouse,Usb
disc backup、usb
mobile hard disk
Usb mouse,Usb
disc backup、usb
mobile hard disk
Yes
Yes
Yes
Yes
Yes
12V/3A /4A DC
12V/3A/4A DC
12V/4A /6ADC
12V4A/6ADC
12V4A /6ADC
( according to
( according to
( according to
( according to
( according to
the sum of
the sum of
the sum of
the sum of
the sum of
DISK)
DISK)
DISK)
DISK)
DISK)
0℃~+60℃
0℃~+60℃
0℃~+60℃
0℃~+60℃
0℃~+60℃
10%~90%
10%~90%
10%~90%
10%~90%
10%~90%
330x250x50mm
330x250x50mm
380x300x55mm
( according to
( according to
( according to
the sum of
the sum of
the sum of
DISK)
DISK)
DISK)
2.6(without
2.6(without
3.0(without
99
440*360*70mm
440*360*90mm
( according to
( according to
the sum of
the sum of
DISK)
DISK)
3.46(without
3.52(without
(Kg)
disc)
disc)
disc)
disc)
disc)
Postscript 2
960H Model Product
parameter Table
4CH
Compress
standard
Video in
Video out
Picture standard
8CH
16CH
BNC(1.0Vp-p/75Ω)
BNC(1.0Vp-p/75Ω)
H.264 baseline [email protected]
BNC(1.0Vp-p/75Ω)
1TV BNC(1.0Vp-p/75Ω)/
1VGA
1TV BNC(1.0Vp-p/75Ω)/ 1VGA
1TV BNC(1.0Vp-p/75Ω)/
1VGA
PAL(960×576),
PAL(960×576),
PAL(960×576),
NTSC(960×480)
NTSC(960×480)
NTSC(960×480)
1024x768/800x
1024x768/800x
1024x768/800x
600/1280x1024
600/1280x1024
600/1280x1024
960H/D1 /CIF
960H/D1 /CIF
960H/D1 /CIF
4ch
8ch
16ch
Roll rate
PAL:1~25P/S;NTSC:1~30P/S
PAL:1~25P/S;NTSC:1~30P/S
PAL:1~25P/S;NTSC:1~30P/S
Audio in
RCA×4
RCA×8
RCA×4
Audio out
RCA×1
RCA×1
RCA×1
Audio encoded
ADPCM
ADPCM
ADPCM
32Kbps
32Kbps
32Kbps
4E
4E/8E
4E/8E/16E
1CH
1CH
1CH/4CH
Manual record,motionrecord
Manual record,motionrecord and
Manual record,motionrecord
and externa alarm record
externa alarm record
and externa alarm record
Record,Play,Internet
Record,Play,Internet
Record,Play,Internet
resolution ratio
Record encoded
Record play
Audio encoded
rate
Alarm In
Alarm Out
Record mode
Mult
mode
100
Hd interface
Network
interface
Mobil platform
RS485
Communication
port
Hard Disc
USB interface
Remote control
Power adapter
Working
temperature
Working
humidity
HDMI: 1080P(1920*1080)
HDMI: 1080P(1920*1080)
HDMI: 1080P(1920*1080)
RJ45(10M/100M)
RJ45(10M/100M)
RJ45(10M/100M/1000M)
Naway.CAB;symbian v3;symbian v5;Naway-Android;iphone,Blackberry
PTZ control
PTZ control
PTZ control
RS485×1,USB2.0×2
RS485×1/2,USB2.0×2
RS485×1/2,USB2.0×2
SATA×1/2(maximum 4T)
SATA×1/2/4(maximum 4T)
2/4/8SATA(maximum 4T)
Usb mouse,Usb disc backup、
usb mobile hard disk
Usb mouse,Usb disc backup、
usb mobile hard disk
Usb mouse,Usb disc backup、
usb mobile hard disk
Yes
Yes
Yes
12V/3A/4A DC
12V/3A /4A/6A DC
12V/3A /4A/6A DC/ATX
( according to the sum of
( according to the sum of
( according to the sum of
DISK)
DISK)
DISK)
0℃~+60℃
0℃~+60℃
0℃~+60℃
10%~90%
10%~90%
10%~90%
380x300x55mm
330x250x50mm
330x250x50mm
440X400X70
( according to the sum of
( according to the sum of
440X400X90
DISK)
DISK)
Product size
(mm)
( according to the sum of
DISK)
Product weight
(Kg)
2.6(without disc)
2.6(without disc)
Attention:Parameters vary depending on the model
101
3.0(without disc)
PRODUCT WARRANTY CARD
All the products sold are covered by 12months warranty from the date of
invoice.
Warranty instructions:
1. Please contact us when the product is caused by its own fault within 1year
warranty.
2. Please mail us your written warranty card as soon as possible after purchasing
our products so that we can repair or replace this product to its original operation
condition. Or the company will not deal with it.
3. Please write the truth on the warranty card.
4. Paid for repairing as follows:
A: Equipment failure caused by human operation
B: Equipment failure caused by not conforming to the using environment
C: No warranty card
D: Warranty expired
Product model
Purchasing time
Product serial number
User name
Contact person
Telephone
Note:Please keep the warranty card for the better service.
102
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement