advertisement
AIMCO
For over 40 years AIMCO has been working with manufacturers around the world, we are the complete global source for all assembly, fastening, and critical bolting needs. AIMCO can effectively and swiftly meet your needs whether you’re in Thailand fastening a 3 mm nut at 3 Nm, or in Tennessee, USA torquing the last lug nut. AIMCO provides the tools and solutions, on a global scale, that guarantee the success of your project. It is with great pride that AIMCO can say the products that we manufacture are MADE IN THE USA.
ISO 9001: 2015 Certified
Visit our NEW website www.aimco-global.com
AIMCO
TABLE OF CONTENTS
AIMCO
GEN IV ACE CONTROLLER . . . . . . . . . . . . . . . . . . . . . . 10
CONTROLLER SOFTWARE . . . . . . . . . . . . . . . . . . . . . . 17
1000 SERIES NUTRUNNERS . . . . . . . . . . . . . . . . . . . . . 18
1000, 2000, & 5000 SERIES PISTOL GRIP NUTRUNNERS. . . . . . . . 20
2000, 3000, & 5000 SERIES ANGLE NUTRUNNERS . . . . . . . . . . 21
2000, 3000, & 5000 SERIES INLINE NUTRUNNERS . . . . . . . . . . 22
5000 SERIES FIXTURED NUTRUNNERS . . . . . . . . . . . . . . . . 23
TUBENUT NUTRUNNERS AND SPECIALTY GEARHEADS . . . . . . . . . 24
HOLD & DRIVE NUTRUNNERS . . . . . . . . . . . . . . . . . . . . 25
MID-EXIT CABLE NUTRUNNERS. . . . . . . . . . . . . . . . . . . . 26
RIV NUTRUNNERS. . . . . . . . . . . . . . . . . . . . . . . . . . 27
HT SERIES DC TOOLS . . . . . . . . . . . . . . . . . . . . . . . . 28
HT SERIES DC ANGLE TOOLS . . . . . . . . . . . . . . . . . . . . 29
HT SERIES DC DUAL LEVER AND GEARHEAD TOOLS . . . . . . . . . . 30
HT SERIES NOSE EXTENSIONS . . . . . . . . . . . . . . . . . . . . 31
HT SERIES DC TOOL ACCESSORIES. . . . . . . . . . . . . . . . . . 31
DC TOOL / SPINDLE SELECTION GUIDE . . . . . . . . . . . . . . . . 32
CABLES AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . 34
CORDLESS TOOLS. . . . . . . . . . . . . . . . . . . . . . . . . . 37
MULTIPLE NUTRUNNING SYSTEMS . . . . . . . . . . . . . . . . . . 39
UA-MC SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
UA-AMC SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . 41
UEC-4800 CONTROLLERS . . . . . . . . . . . . . . . . . . . . . . 42
UEP-MC SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . 45
UECD-4800 CONTROLLERS . . . . . . . . . . . . . . . . . . . . . 46
UDP-MC / ACRA-PULSE MC SERIES . . . . . . . . . . . . . . . . . 48
UECP-4800 CONTROLLERS. . . . . . . . . . . . . . . . . . . . . . 49
CONTROLLED PULSE TOOL ACCESSORIES . . . . . . . . . . . . . . . 50
FIXTURED F-SERIES NUTRUNNERS . . . . . . . . . . . . . . . . . . 51
TORQUE MEASUREMENT OVERVIEW . . . . . . . . . . . . . . . . . 55
TORQUE MEASUREMENT SYSTEMS . . . . . . . . . . . . . . . . . . 58
TORQUE MEASUREMENT TESTERS . . . . . . . . . . . . . . . . . . 59
TORQUE MEASUREMENT ANALYZERS . . . . . . . . . . . . . . . . . 62
TOOL MANAGER / AUDIT MANAGER SOFTWARE . . . . . . . . . . . . 65
HIGH-CAPACITY TEST STANDS . . . . . . . . . . . . . . . . . . . . 66
TORQUE WRENCHES . . . . . . . . . . . . . . . . . . . . . . . . 71
TORQUE CARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
DATA COLLECTION SOFTWARE . . . . . . . . . . . . . . . . . . . . 79
TRANSDUCERS . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
TORQUE MEASUREMENT CABLES. . . . . . . . . . . . . . . . . . . 84
ACRADYNE HT SERIES PNEUMATIC TOOLS . . . . . . . . . . . . . . 85
ACRADYNE HIGH-SPEED SERIES HT PNEUMATIC TOOLS . . . . . . . . 86
ACRADYNE HT SERIES PNEUMATIC TOOL ACCESSORIES . . . . . . . . 87
AIMCO PULSE TOOLS: OVERVIEW. . . . . . . . . . . . . . . . . . . 88
OMEGA PULSE: UAT SERIES . . . . . . . . . . . . . . . . . . . . . 90
OMEGA PULSE: UL / ULT SERIES. . . . . . . . . . . . . . . . . . . 92
SERIES . . . . . . . . . . . . . . . . . . . . . . . . 93
UDBP PULSE SERIES CORDLESS TOOLS . . . . . . . . . . . . . . . 96
UDP-TA DIRECT PLUG-IN PULSE TOOLS . . . . . . . . . . . . . . . . 98
UAN & URW SERIES NUTRUNNERS. . . . . . . . . . . . . . . . . . 99
TUBENUT & GEARED NUTRUNNERS. . . . . . . . . . . . . . . . . 100
DYNATORQUE MANUAL TORQUE MULTIPLIERS . . . . . . . . . . . . 101
US-LT PNEUMATIC SCREWDRIVERS. . . . . . . . . . . . . . . . . 102
US & US-LD PNEUMATIC SCREWDRIVERS. . . . . . . . . . . . . . 104
SIGNATURE SERIES SHUT-OFF IMPACT CORDLESS TOOLS . . . . . . 105
SIGNATURE SERIES PRECISION CLUTCH CORDLESS TOOLS . . . . . . 106
SERIES ELECTRIC SCREWDRIVERS . . . . . . . . . . . . 109
IMPACT TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . 112
GRINDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
SANDERS & DRILLS. . . . . . . . . . . . . . . . . . . . . . . . 115
PERCUSSION TOOLS. . . . . . . . . . . . . . . . . . . . . . . . 116
SCREW PRESENTERS: OVERVIEW . . . . . . . . . . . . . . . . . .117
A-50 SCREW PRESENTERS . . . . . . . . . . . . . . . . . . . . 118
ACRA-FEED AUTOMATIC SCREW FEED SYSTEMS. . . . . . . . . . . 119
GRAVITY DEFYING BALANCERS. . . . . . . . . . . . . . . . . . . 120
LINE REEL BALANCERS / RETRACTORS . . . . . . . . . . . . . . . 121
TOOL SUPPORT SYSTEMS . . . . . . . . . . . . . . . 122
CUSTOM REACTION DEVICES. . . . . . . . . . . . . . . . . . . . 123
ACCESSORIES / LINEAR ARM . . . . . . . . . . . . . 123
GCI TORQUE REACTION ARMS . . . . . . . . . . . . . . . . . . . 124
CARBON TORQUE ARMS / TUBES . . . . . . . . . . . . . . . . . 126
WORKSTATION COMPONENTS AND ASSEMBLIES. . . . . . . . . . . 128
AIR PREPARATION UNITS . . . . . . . . . . . . . . . . . . . . . 130
AIR LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
AIR LINE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . 132
STANDARD FASTENER TOOLS. . . . . . . . . . . . . . . . . . . . 133
. . . . . . . . . . . . . . . . . . . . . 136
CUSTOM / SPECIAL PARTS. . . . . . . . . . . . . . . . . . . . . 138
CONVERSION CHARTS . . . . . . . . . . . . . . . . . . . . . . . 142
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
ERGO-DRIVE sockets are uniquely designed for repeatable, accurate rundowns. They also ensure excellent product quality, longer tool life, and better ergonomics for the tool user. Look for the ERGO-DRIVE logo in this catalog to see where ERGO-DRIVE sockets/extensions benefit tool operation, operator, and rundown.
See page 136 for ERGO-DRIVE details
.
Visit our NEW website www.aimco-global.com
4
PRODUCTIVITY
The speed and efficiency of the assembly process
Every manufacturer wants to produce finished goods in the most cost-effective manner possible. Whether the customer is a large automotive manufacturer, building several hundred vehicles daily, or an electronics company producing individual, custom made components, AIMCO provides products and services that allow each company to work at their ideal pace in order to keep its processes running efficiently.
RELIABILITY
The total cost of tool maintenance and repair
To keep production lines running, tools must perform reliably. AIMCO helps manufacturers face the challenges of maintenance, repair and lost labor time by offering products with superior workmanship and durability. By combining high quality products with a detailed and flexible servicetraining program, AIMCO ensures its tools will meet the customer’s expectations of reliability.
ERGONOMICS
The relationship between assembler and the assembly process
Employees are the most important assets of any company. Protecting these individuals from job related health issues is critical. To help its customers face the challenges surrounding ergonomics, AIMCO focuses on providing products that combine a lack of torque reaction, low vibration, light weight, as well as quiet and simple operation. These features allow assemblers to do their job in the safest possible manner and help manufacturers avoid the often hidden costs of workplace injuries.
QUALITY
The ability of the tool to adhere to process requirements
The most important challenge faced by many companies is meeting the customer’s demands for quality. AIMCO provides assembly tools that have been tested and proven to meet the most stringent engineering specifications.
AIMCO backs those tools up with its innovative Auditor torque measurement products. This allows manufacturers to focus on their most important goal — creating a quality product.
Visit our NEW website www.aimco-global.com
PERQ
®
Power tool specified for application
process that runs efficiently, produces high quality products and does so at the lowest possible cost.
Combining PERQ with AIMCO’s vast experience and unequalled service will enable any manufacturer to succeed in the global marketplace.
Each of the PERQ elements acts as a gear – each interacts with the others to affect the overall profitability of the manufacturing process. AIMCO looks at each step in the manufacturing process to determine the best type of tool, or equipment, for that application. Only AIMCO, with its extensive product lineup, can offer the manufacturer the ideal tool for the job, whether it be continuous drive or pulse tool, electric, pneumatic or battery powered.
tools with electric or battery powered motors
Pneumatic tools will often have a longer overall service life when compared to
Power Source
Power Source
similar tools with electric or battery powered motors
Power Tool or Controlled Tool specified for application
Electric tools can provide excellent torque repeatability due to their slower speeds
Cordless tools, due to their mobility, allow the most flexibility in line-design
Cordless tools prevent air-hoses and cords from interfering with operators movements
Electric tools allow more flexibility at low torque ranges (< 3 Nm) while pneuelectric or battery powered motors.
• Pneumatic tools will often have a longer overall service life when compared to similar tools with
Drive Type
Drive Type
electric or battery powered motors.
Discontinuous drive tools will provide the fastest operation
Discontinuous tools often allow operators to do more by freeing up one hand excellent torque repeatability due to their slower speeds.
for other, simultaneous tasks
Discontinuous tools offer virtually no torque reaction, making cumbersome and
• Cordless tools prevent air-hoses and cords from interfering with operators movements.
expensive reaction-systems unnecessary
Continuous drive tools can be used effectively on a wider range of joint types, from very hard to extremely soft
Continuous drive tools generally require less frequent maintenance than dis-
Continuous drive tools can provide excellent Torque repeatability due to their reaction-systems unnecessary.
Discontinuous drive tools offer equal or superior Clamp Load repeatability
• Continuous drive tools can be used effectively on a wider range of joint types, from very hard to extremely soft.
when compared to continuous drive tools with similar torque capacity
• Continuous drive tools generally require less frequent maintenance than discontinuous drive tools.
Pistol-style tools generally offer the quickest operation due to their “point-andtighten” familiarity continuous drive tools with similar torque capacity Inline continuous drive tools will normally require a reaction device when used on applications requiring greater than approximately 2.5 Nm (20 InLb)
For continuous drive tools, the right-angle configuration allows the highest possible torque ranges before reaction devices are required
Right-angle tools often allow the ability to reach into some low-clearance applications
Hand-held tools are normally the fastest to use on individual applications
Multi-spindle systems provide high productivity rates, but their speed and cost may not be justified
• Multi-spindle systems provide high productivity rates, but their speed and cost may not be justified.
• Fixtured systems can be fully automated, allowing the operator to conduct other tasks as the system operates.
Visit our NEW website www.aimco-global.com
5
OVERVIEW
The speed and efficiency of the assembly process
AIMCO’s commitment to you doesn’t end with the purchase of our tools. Our goal is to educate you and your team on the most effective and efficient ways to utilize our tools; therefore, consistently producing a quality product.
One of the many benefits of purchasing AIMCO tools is the opportunity to attend our Tool-U training. AIMCO believes this is one of the greatest assets we can offer you. AIMCO has spent valuable time and dollars in setting up a training program at our corporate headquarters in Portland, Oregon, that will enable your team to receive effective technical and practical training.
Our training program is not performed in just one corner of our facility; virtually our entire facility is accessed for training individuals tailored to their specific needs and applications. This is essential for the continued success of our training.
6
Visit our NEW website www.aimco-global.com
The objective of the Tool-U program is to train your team from a technical aspect, learning how to effectively trouble shoot in order to reduce down time, as well as testing and proper use of the tool for maximum performance.
We do not depend on just one individual to train our customers; AIMCO utilizes a team of experts to share their knowledge with you. Our training programs have been designed to cover all elements influencing the fastening process. The first key to success is understanding the mechanics of the fastened joint; AIMCO then explores the synergy between the joint, power tool, torque measurement and operator handling. The knowledge you gain from participating in the Tool University program can be applied to almost any assembly process regardless of the tool brand.
AIMCO is so committed to ensuring you receive proper training that this program is offered to our customers at no charge.
Visit our NEW website www.aimco-global.com
7
OVERVIEW
The speed and efficiency of the assembly process
AIMCO’s Technical and Repair Service departments are one of the biggest value adds in the industry.
We don’t just work for you, we work with you.
AIMCO’s Repair and Technical Field Services provide support unmatched by our competitors.
Our skilled technicians work closely with our
Technical Services group, as well as our expert team of engineers, to share knowledge, keep up with new technologies, and improve processes.
GUARANTEED
The relationship between assembler and the assembly process
When AIMCO receives tools and equipment for servicing, they are pre-tested and inspected to identify issues and provide pertinent feedback to the user on getting the most out of their tool investment. We provide precise repair estimates giving the best value for your money. Repairs are completed using factory standards, parts, and processes. Once a repair is complete, it is tested, and/or calibrated, using N.I.S.T. certified measuring equipment, and guaranteed to perform to factory specifications.
8
Visit our NEW website www.aimco-global.com
CUSTOMER SERVICE
The total cost of tool maintenance and repair
To keep production lines running, tools must perform reliably. AIMCO helps manufacturers face the challenges of maintenance, repair, and lost labor time by offering products with superior workmanship and durability. By combining high quality products with a detailed and flexible service-training program, AIMCO ensures its tools will meet the expectations of reliability.
FOLLOW THROUGH
The ability of the tool to adhere to process requirements
The most important challenge faced by most companies is to meet its customer’s demands for quality. AIMCO provides assembly tools that have been tested and proven to meet the most stringent engineering specifications. AIMCO backs those tools with its innovative Auditor torque measurement products. This allows manufacturers to focus on their most important goal — satisfied customers.
Visit our NEW website www.aimco-global.com
9
ACRADYNE GEN IV ACE CONTROLLER
AcraDyne’s Gen IV ACE Controller provides a single platform that commands all transducerized tools in the AIMCO portfolio
A
IR |
C
ORDLESS |
E
LECTRIC
The same, simple programming for all tool types, including:
AcraDyne
- DC Tools
- Cordless Battery Tools
Uryu
- Air Powered Tools
- Electric Tools
• No additional controller training needed for different platforms (tool type specific knowledge is required)
• One common communication for your global data collection, line controls, and fieldbus platforms
Visit our NEW website www.aimco-global.com
ACRADYNE GEN IV ACE CONTROLLER
ACE controller provides ultimate FLEXIBILITY and FREEDOM to command tools for every application
One common communication for your global data collection, line controls, and fieldbus platforms.
Visit our NEW website www.aimco-global.com
ACRADYNE GEN IV ACE CONTROLLER
The AcraDyne Gen IV ACE controller is the culmination of more than 40 years of serving our industrial fastening customers with 15 years of designing and manufacturing DC tools that are Made in the USA. It is filled with countless advanced capabilities and features. The Gen IV ACE Controller is the core of the modular AcraDyne DC system. One controller will command any tool in the AcraDyne line from 0.5 Nm to 12,000 Nm, all with one cable.
Four Digit LED Torque Display:
Large numbers can be seen from a distance.
Parameter Set Display:
Displays current parameter set and enables user to quickly change by scrolling up or down.
Secondary display allows user to easily set and toggle through information:
• Angle
• Engineering Units
• Bolt Count
• Job/Job Sequence
Optional
7”
Touch-
Screen Display:
• Runs the same software on PC for ease of use.
• Real-Time
Graphing.
• Selectable Run
Screens
FEATURES AND BENEFITS
• Web browser based programing – Receive data on your PC, tablet, smartphone, or any other webcapable device. You can use more than one device at a time: Be in program mode on one device while reviewing real-time curves on another, while watching tool diagnostics on a third
• Multiple fastening strategies – Program up to 256 parameters with as many as 20 steps
• Jobs capability – 99. Event log – 5,000
• Backup & restore through USB or Ethernet
• Removable flash memory
• Assignable I/O (8 X 8)
• Rundown storage – 1,000,000
• Real-time curve viewing. Curve storage – 20,000
NETWORKING CAPABILITIES
• Ethernet Protocols including Open
Protocol, Ethernet/IP & PFCS
• Modular field bus connectivity:
PROFIBUS, DeviceNET, Modbus
TCP, or any fieldbus offered by
• Data collection
• Serial protocols and string output
• Bar code scanning & printing
• Multi-spindle synchronization
Visit our NEW website www.aimco-global.com
ACRADYNE GEN IV ACE CONTROLLER
Tool Connector
• Tool connector varies by tool type
USB Ports (
4
)
• Backup and Restore
• Update Software
• Download Data and
Curves
• Expandable USB
Peripherals
P ower
C onneCtor
(
110
V /
220
V)
System Port
• Uses standard USB Type-B cable
• Easily connect to any computer to run software, program your controller, and download data and curve.
Illuminated On/Off Switch
Dual Ethernet Ports
• Enables two networks simultaneously for separate line control and data collection
• Supports any industry standard protocol
• Remote system monitoring, programming and download data
Serial Port
• Data String Output
• Serial Protocols
• Bar Code Scanners
• Printers
24V I/O (Assignable)
• 8 In/8 Out
Mounting Bracket with Wire and
Cable Routing Channels
Fieldbus Platform
• Supports CC-Link,
DeviceNET, PROFINET,
PROFIBUS and all platforms offered by
Visit our NEW website www.aimco-global.com
ACRADYNE GEN IV ACE CONTROLLER
SYSTEM PORT
& REMOVABLE
MEMORY
X
X
X
X
GEN IV ACE iEC Controller for all AcraDyne DC Tools
LIGHTS (L)
LED DISPLAY (D)
GRAPH (G)
24V I/O
ASSIGNABLE
8 X 8”
SERIAL
PORT WITH
PROTOCOLS
BACKUP &
RESTORE
(USB)
L/D
L/D
L/D/G
L/D/G
X
X
X
X
X
X
X
X
X
X
ETHERNET*
TWO PORTS
MODEL iEC4E iEC4EV iEC4EG iEC4EGV
X
X
X
X
* Ethernet channel supports the Open Protocol, Toolsnet, EtherNet/IP, Modbus/TCP, and other protocols.
Add (-T) to model number for top exit tool cable option. For fieldbus options add: P = Profibus, C = CC Link, D = DeviceNet, N = ProfiNet. Other fieldbus options available upon request.
MODEL iAC4E iAC4EV iAC4EG iAC4EGV iAC4ES iAC4ESV iAC4ESG iAC4ESGV iAC4ESR iAC4ESRV
SYSTEM PORT
& REMOVABLE
MEMORY
X
X
X
X
X
X
X
X
X
X
GEN IV ACE iAC Controller for Transducerized Uryu Air Tools
LIGHTS (L)
LED DISPLAY (D)
GRAPH (G)
L/D
L/D
L/D/G
L/D/G
L/D
L/D
L/D/G
L/D/G
L/D
L/D
24V I/O
ASSIGNABLE
8 X 8”
X
X
X
X
X
SERIAL
PORT WITH
PROTOCOLS
X
X
X
X
X
X
X
X
X
X
BACKUP &
RESTORE
(USB)
X
X
X
X
X
X
X
X
X
X
SOLENOID
SHUT OFF
ON BOARD
X
X
X
X
X
X
PROGRAMMABLE
REGULATOR
ON BOARD
X
X iAC4ESRG iAC4ESRGV
X
X
L/D/G
L/D/G X
X
X
X
X
X
X
X
X
* Ethernet channel supports the Open Protocol, Toolsnet, EtherNet/IP, Modbus/TCP, and other protocols.
Add (-T) to model number for top exit tool cable option. For fieldbus options add: P = Profibus, C = CC Link, D = DeviceNet, N = ProfiNet. Other fieldbus options available upon request.
ETHERNET*
TWO PORTS
X
X
X
X
X
X
X
X
X
X
X
X
Visit our NEW website www.aimco-global.com
ACRADYNE GEN IV ACE CONTROLLER
MODEL iBC4E iBC4EV iBC4EG iBC4EGV
GEN IV ACE iBC Controller for all AcraDyne Transducerized Battery Tools
SYSTEM PORT
& REMOVABLE
MEMORY
LIGHTS (L)
LED DISPLAY (D)
GRAPH (G)
24V I/O
ASSIGNABLE
8 X 8”
SERIAL
PORT WITH
PROTOCOLS
BACKUP &
RESTORE (USB)
ETHERNET*
TWO PORTS
X
X
X
X
L/D
L/D
L/D/G
L/D/G
X
X
X
X
X
X
* Ethernet channel supports The Open Protocol, Toolsnet, EtherNet/IP, Modbus/TCP, and other protocols.
For fieldbus options, add: P = Profibus, C = CC Link, D = DeviceNet, N = ProfiNet. Other - options available upon request.
X
X
X
X
X
X
X
X
Visit our NEW website www.aimco-global.com
ACRADYNE GEN IV ACE CONTROLLER
NETWORK CONNECTIVITY
DIMENSIONS
WIDTH
5.83 in / 148 mm
HEIGHT
15.75 in / 400 mm
DEPTH
12.44 in / 316 mm
Visit our NEW website www.aimco-global.com
WEIGHT
15.65 lb / 7.1 kg
ACRADYNE CONTROLLER SOFTWARE
SOFTWARE
AcraDyne’s software package is on-board every AcraDyne controller and is provided FREE of charge. This comprehensive, user-friendly program allows programming, analysis, and diagnostics.
The software is based on a standard web browser, allowing you to connect the AcraDyne controller with any computer, tablet, or smart device. Connect through Ethernet, USB, or wirelessly via a network connected to both devices.
Adding and editing Parameter Sets
(256) and Jobs (99) is easy and intuitive in the parameter set up function.
View curve results in real time or view stored results. As many as 20,000 curve results can be stored in memory.
Tool programming and diagnostics for repair, calibration and advanced troubleshooting.
Choose from several run screens that display easy to view, large screen indicators.
Visit our NEW website www.aimco-global.com
ACRADYNE 1000 SERIES NUTRUNNERS
FEATURES AND BENEFITS
Superior size, speed, and duty cycle
Angle
In-line
Push-to-Start
Fixtured
Rear Exit
Cable
APPLICATION DATA
1000 SERIES
ANGLE*
AEN4C12004B
AEN4C12009B
AEN4C12014B
AEN4C12018B
AEN4C12022B
IN-LINE**
AES4A12003B(V)(Q)
AES4A12006B(V)(Q)
AES4A12011B(V)(Q)
AES4A12014B(V)(Q)
AES4A12018BV
AES4A12022BV
PUSH-TO-START
AEL4A12003B(Q)
AEL4A12006B(Q)
AEL4A12011B(Q)
AEL4A12014B(Q)
AEL4A12018B
AEL4A12022B
FIXTURED***
AEF4(A)(C)(X)12003B(B)(Q)
AEF4(A)(C)(X)12006B(B)(Q)
AEF4(A)(C)(X)12011B(B)(Q)
AEF4(A)(C)(X)12014B(B)(Q)
AEF4(A)(C)(X)12018B(B)
AEF4(A)(C)(X)12022B(B)
NM
4
9
14
18
22
3
6
11
14
18
22
3
6
11
14
18
22
14
18
22
3
6
11
* Add ”F” to part numbers for flush socket.
** “V” indicates extended Ergo-Drive output
MAX
TORQUE
*** Add “B” to part numbers for bottom exit cable.
10
13
16
2.2
4.4
8.1
NM
0.8 - 3
1.5 - 6
2.8 - 11
3.5 - 14
4.5 - 18
5.5 - 22
1 - 4
2.3 - 9
3.5 -14
4.5 - 18
5.5 - 22
0.8 - 3
1.5 - 6
2.8 - 11
3.5 - 14
4.5 - 18
5.5 - 22
FT-LB
2.2
4.4
8.1
10
13
16
3
6.6
10
13
16
2.2
4.4
8.1
10
13
16
0.8 - 3
1.5 - 6
2.8 - 11
3.5 - 14
4.5 - 18
5.5 - 22
TORQUE
RANGE FT-LB
0.7 - 3
1.7 - 6.6
2.6 - 10
3.3 - 13
4.1 - 16.
0.6 - 2.2
1.1 - 4.4
2 - 8.1
2.6 - 10
3.3 - 13
4.1 - 16
0.6 - 2.2
1.1 - 4.4
2 - 8.1
2.6 - 10
3.3 - 13
4.1 - 16
0.6 - 2.2
1.1 - 4.4
2 - 8.1
2.6 - 10
3.3 - 13
4.1 - 16
FREE SPEED
RPM LB
2,625
2,625
1,313
1,037
840
656
3,111
1,750
875
691
560
2,625
2,625
1,313
1,037
840
656
2.0
2.0
2.2
2.2
2.2
2.2
2.0
2.2
2.2
2.2
2.2
2.0
2.0
2.2
2.2
2.2
2.2
2,625
2,625
1,313
1,037
840
656
2.2
2.2
2.2
2.0
2.0
2.2
Fixtured
Bottom Exit
Cable
WEIGHT (-)
SOCKET KG
OUTPUT
DRIVE
0.91
1/4 Q.C.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
0.91
3/8 sq. dr.
0.91
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
0.91
3/8 sq. dr.
0.91
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
0.91
3/8 sq. dr.
0.91
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
1.00
3/8 sq. dr.
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Visit our NEW website www.aimco-global.com
ACRADYNE 1000 SERIES NUTRUNNERS
DIMENSIONS
ANGLE
AEN4C12004B
AEN4C12009B
AEN4C12014B
AEN4C12018B
AEN4C12022B
DIMENSIONS
INLINE
AES4A12003B
AES4A12006B
AES4A12011B
AES4A12014B
AES4A12018B
AES4A12022B
PUSH-TO-START
AEL4A12003B
AEL4A12006B
AEL4A12011B
AEL4A12014B
AEL4A12018B
AEL4A12022B
IN
11.65
11.00
11.66
11.66
11.66
(A) MM
295.9
279.5
296.4
296.4
296.4
IN
1.47
1.47
1.47
1.47
1.47
(B) MM
37.3
37.3
37.3
37.3
37.3
IN
11.12
11.12
11.44
11.44
11.44
11.44
IN
11.31
11.32
11.62
11.62
11.62
11.62
(A)
(A)
MM
282.7
282.7
290.5
290.5
290.5
290.5
MM
287.3
287.4
295.4
295.4
295.4
295.4
IN
1.47
1.47
1.47
1.56
1.47
1.47
IN
1.56
1.56
1.56
1.56
1.56
1.56
(B)
(B)
MM
37.3
37.3
37.3
39.6
37.3
37.3
MM
39.6
39.6
39.6
39.6
39.6
39.6
A
B
IN
.98
1.29
1.29
1.29
1.29
(C)
C
D
MM
24.8
32.8
32.8
32.8
32.8
E
IN
.62
.82
.82
.82
.82
B
(D) MM
A
15.8
20.9
20.9
20.9
20.9
C
IN
.40
.52
.52
.52
.52
(E) MM
10.2
13.1
13.1
13.1
13.1
D
E
IN
7.38
7.38
7.38
7.38
7.38
7.38
IN
7.38
7.38
7.38
7.38
7.38
7.38
(C)
(C)
MM
187.5
187.5
187.5
187.5
187.5
187.5
MM
187.5
187.5
187.5
187.5
187.5
187.5
D
IN
1.59
1.59
1.59
1.59
1.59
1.59
IN
1.59
1.59
1.59
1.59
1.59
1.59
G
(D)
(D)
MM IN
40.4 1.25
40.4 1.25
40.4 1.25
40.4 1.25
40.4 1.25
40.4 1.25
MM IN
40.4 1.25
40.4 1.25
40.4 1.25
40.4 1.25
40.4 1.25
40.4 1.25
A
B
C
(E)
(E)
MM
31.8
31.8
31.8
31.8
31.8
31.8
MM
31.8
31.8
31.8
31.8
31.8
31.8
F
DIMENSIONS
FIXTURED IN
AEF4A12003B
AEF4A12006B
AEF4A12011B
AEF4A12014B
11.53
11.53
12.20
12.20
AEF4A12018B
AEF4A12022B
AEF4C12003B
AEF4C12006B
AEF4C12011B
AEF4C12014B
AEF4C12018B
AEF4C12022B
AEF4X12003B
AEF4X12006B
AEF4X12011B
AEF4X12014B
9.35
9.35
10.00
10.00
AEF4X12018B 10.00
AEF4X12022B 10.00
12.20
12.20
15.32
15.32
15.99
15.99
15.99
15.99
(A) MM IN
292.9 9.10
292.9 9.10
309.8
9.10
309.8
9.10
309.8
9.10
309.8
9.10
389.2
9.10
389.2 9.10
406.1
9.10
406.1
9.10
406.1
9.10
406.1
9.10
237.5
9.10
237.5
9.10
254.4
9.10
254.4
9.10
254.4
9.10
254.4
9.10
(B) MM IN
231.04 1.47
231.04
1.47
231.04 1.47
231.04 1.47
231.04 1.47
231.04 1.47
231.04 1.47
231.04
1.47
231.04 1.47
231.04 1.47
231.04 1.47
231.04 1.47
231.04 1.47
231.04
1.47
231.04 1.47
231.04 1.47
231.04 1.47
231.04 1.47
(C) MM IN
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
37.3 1.13
(D) MM IN
28.57 2.06
28.57 2.06
28.57 2.72
28.57 2.72
28.57 2.72
28.57 2.72
28.57 2.06
28.57 2.06
28.57 2.72
28.57 2.72
28.57 2.72
28.57 2.72
28.57 2.06
28.57 2.06
28.57 2.72
28.57 2.72
28.57 2.72
28.57 2.72
E
(E) MM IN
52.2 1.59
52.2 1.59
69.1
1.59
69.1 1.59
69.1 1.59
69.1 1.59
52.2 1.59
52.2 1.59
69.1
1.59
69.1 1.59
69.1 1.59
69.1 1.59
52.2 1.59
52.2 1.59
69.1
1.59
69.1 1.59
69.1 1.59
69.1 1.59
(F) MM IN
40.4 2.18
40.4 2.18
40.4 2.18
40.4 2.18
40.4 2.18
40.4 2.18
40.4 5.98
40.4 5.98
40.4 5.98
40.4 5.98
40.4 5.98
40.4
5.98
40.4 .80
40.4 .80
40.4 .80
40.4 .80
40.4 .80
40.4
.80
(G) MM
20.4
20.4
20.4
20.4
20.4
20.4
55.5
55.5
151.8
151.8
151.8
151.8
151.8
151.8
55.5
55.5
55.5
55.5
Visit our NEW website www.aimco-global.com
ACRADYNE PISTOL GRIP NUTRUNNERS
FEATURES AND BENEFITS
1000 & 2000 Series
• 1000 & 2000 series tools available with bottom exit, rear exit, or top exit cable configurations. 5000 series tools available in bottom exit or top exit models
• AcraDyne’s multi-function button
(MFB) provides increased flexibility
• On-board lights and audible signal for operator feedback
• Push-To-Start models also available
Bottom
Exit Cable
5000 Series
Top Exit
Cable
Rear Exit
Cable
AEP35075AV
AEP35635A
APPLICATION DATA
MAX
TORQUE
NM FT-LB
1000 SERIES*
AEP4(A)(R)(T)12003B(V)(Q) 3
AEP4(A)(R)(T)12006B(V)(Q) 6
AEP4(A)(R)(T)12011B(V)(Q) 11
AEP4(A)(R)(T)12014B(V)(Q) 14
AEP4(A)(R)(T)12018BV
AEP4(A)(R)(T)12022BV
2000 SERIES*
18
22
2.2
4.4
8.1
10
13
16
AEP4(A)(R)(T)22020BV
AEP4(A)(R)(T)22025BV
AEP4(A)(R)(T)22030BV
AEP4(A)(R)(T)22035BV
AEP4(A)(R)(T)22040BV
20
25
30
35
40
14
18
22
25
29
TORQUE RANGE
NM FT-LB
0.8 - 3
1.5 - 6
2.8 - 11
3.5 - 14
0.6 - 2.2
1.1 - 4.4
2 - 8.1
2.6 - 10
4.5 - 18 3.3 - 13
5.5 - 22 4.1 - 16
5 - 20 3.7 - 14
6.3 - 25 4.6 - 18
7.5 - 30
8.8- 35
5.5 - 22
6.5 - 25
10 - 40 7.4 - 29
FREE
SPEED
RPM
2,625
2,625
1,313
1,037
840
656
1,313
1,037
840
747
656
WEIGHT (-)
SOCKET
LB KG
2.2
1.00
2.2
1.00
2.3
1.04
2.3
1.04
2.3
1.04
2.3
1.04
2.4
1.09
2.4
1.09
2.4
1.09
2.4
1.09
2.4
1.09
OUTPUT
SQ DR
3/8*
3/8*
3/8.
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
IN
(A)
MM IN
(B)
MM IN
(C)
MM IN
(D)
MM
7.34
178.8
0.54
13.7
6.01
152.6
1.96
49.7
7.34
178.8
0.54
13.7
6.01
152.6
1.96
49.7
8.00
203.3
0.54
13.7
6.01
152.6
1.96
49.7
8.00
203.3
0.54
13.7
6.01
152.6
1.96
49.7
8.00
203.3
0.54
13.7
6.01
152.6
1.96
49.7
8.00
203.3
0.54
13.7
6.01
152.6
1.96
49.7
8.66
219.9
0.56
14.2
6.87
174.4
1.96
49.7
8.66
219.9
0.56
14.2
6.87
174.4
1.96
49.7
8.66
219.9
0.56
14.2
6.87
174.4
1.96
49.7
8.66
219.9
0.56
14.2
6.87
174.4
1.96
49.7
8.66
219.9
0.56
14.2
6.87
174.4
1.96
49.7
* “V” indicates extended Ergo-Drive output Replace “V” with “Q” for 1/4” quick change output only as noted in the table.
Add “A” to part numbers for bottom exit cable models. Add “R” to part numbers for rear exit cable models. Add “T” to part numbers for top exit cable models
MAX
TORQUE
NM FT-LB
TORQUE RANGE
NM FT-LB
5000 SERIES
AEP35075AV(T)
AEP35090AV(T)
AEP35110AV(T)
AEP35135AV(T)
AEP35170AV(T)
AEP35350A(T)
F
AEP35420A(T)
AEP35515A(T)
7
75
90
55
66
110
135
81
99
170 125
280
6
206
19 - 75
23 - 90
14 - 55
17 - 66
28 - 110 21 - 81
34 - 135 25 - 99
43 - 170 32 - 125
70 - 280 52 - 207
350 258
420 310
88 - 350
105 - 420
65 - 258
78 - 310
12.7mm
.50in
515 380 128 - 515 95 - 380
635 468 159 - 635 117 - 469
“V” indicates extended Ergo-Drive output.
Add “T” to part numbers for top exit cable models
D
304.8mm
12.00in
37.3mm
1.47in
15.9mm
.63in
1000 Series
C
FREE
SPEED
RPM
D
B
944
767
634
515
418
F
192
159
E
129
104
6.4mm
.25in
C
C
WEIGHT (-)
SOCKET
LB KG
8
9.2
4.17
9.2
4.17
9.2
4.17
9.2
4.17
9.2
4.17
13.6
2
6.17
13.6
6.17
13.6
6.17
13.6
6.17
13.6
6.17
7
A
377.8mm
14.88in
OUTPUT
SQ DR IN
(A)
MM IN
(B)
MM IN
(C)
MM IN
(D)
MM
1/2
1/2
1/2
1/2
1/2
1
3/4
TOOL RUNDOWN
2 PLACES 180° APART
3/4
3/4
R17.5mm
.69in
3/4
3/4
F
E
SHOWN WITHOUT REACTION BAR
AND WITHOUT LOCKNUT
15.95
405.2
.68
17.4
7.37
187.1
1.96
49.7
15.95
405.2
.68
17.4
7.37
187.1
1.96
49.7
15.95
405.2
.68
17.4
7.37
187.1
1.96
49.7
15.95
405.2
.68
17.4
7.37
187.1
1.96
49.7
6
15.95
405.2
5
.68
17.4
4
7.37
187.1
1.96
49.7
12.7mm
.50in
18.43
468.2
1.11
28.1
7.37
187.1
1.96
49.7
18.43
468.2
1.11
28.1
7.37
187.1
1.96
49.7
18.43
18.43
468.2
468.2
.63in
28mm
1.10in
1.11
1.11
28.1
47mm
28.1
7.37
7.37
187.1
187.1
1.96
1.96
49.7
49.7
31.8mm
18.43
468.2
1.11
28.1
7.37
187.1
1.96
49.7
40.7mm
58.7mm
2.31in
A
D
B
C
5000
Series
C
1
A
8 7
B
25.4mm
1.00in
B
B
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
10000 SE PINE STREET
PORTLAND, OREGON 97216
503.254.6600
5
DOCUMENT CONTROL
UNCONTROLLED DOCUMENTS. HOLDERS ARE RESPONSIBLE FOR
VERIFYING THE CURRENT REVISION LEVEL WITH PURCHASING OR
ENGINEERING PRIOR TO USE OR FABRICATION. THE CONTROLLED
VERSION OF THIS DOCUMENT IS ELECTRONICALLY MAINTAINED.
PROPRIETARY AND CONFIDENTIAL
CONFIDENTIAL TO ACRADYNE/AIMCO. IN THE ABSENCE
HAS LOANED THIS COPY WITH THE MUTUAL UNDERSTANDING
THAN FOR THAT IN WHICH IT WAS PROVIDED, (B) THE DATA
CONTAINED HEREIN WILL NOT BE DISCLOSED TO OTHERS,
(C) IT WILL NOT BE REPRODUCED, AND (D) IT WILL BE RETURNED
TO ACRADYNE/AIMCO IMMEDIATELY UPON DEMAND.
C
B
A
5/17/11
4/21/11
03/09/11
25871 SWITCH WAS 24874
UPDATED WITH PRODUCTION
REDLINES
PRODUCTION RELEASE
REVISION BLOCK
A
DESCRIPTION OF CHANGES MADE TO PART
294
277
230
ECN #
MDJ
JJN
MDJ
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
DIMENSIONS AND TOLERANCING PER ANSI Y14.5
SURFACE ROUGHNESS PER ANSI Y14.36
BLOCK TOLERANCING PER DECIMAL:
.X = .030 .XX = .010 .XXX =
ANGLE =
.005 .XXXX =
0 30'
REMOVE BURRS AND SHARP EDGES: R.015 MAX
MACHINE SURFACE FINISH: 125 RMS OR BETTER
.0005
SIZE
D
SCALE 1 : 1
AEP4A12011AV
OUTLINE DRAWING
1000 SERIES
PART / DRAWING NUMBER
AEP4A12011AV
DO NOT SCALE DRAWING
REVISION
C
SHEET 2 OF 3
A
Visit our NEW website www.aimco-global.com
4 3 2 1 6
D
5
DOCUMENT CONTROL
PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED TO BE
UNCONTROLLED DOCUMENTS. HOLDERS ARE RESPONSIBLE FOR
ENGINEERING PRIOR TO USE OR FABRICATION. THE CONTROLLED
VERSION OF THIS DOCUMENT IS ELECTRONICALLY MAINTAINED.
PROPRIETARY AND CONFIDENTIAL
THIS DRAWING CONTAINS INFORMATION STRICTLY
CONFIDENTIAL TO ACRADYNE/AIMCO. IN THE ABSENCE
OF EXPRESSED WRITTEN PERMISSION, ACRADYNE/AIMCO
HAS LOANED THIS COPY WITH THE MUTUAL UNDERSTANDING
THAN FOR THAT IN WHICH IT WAS PROVIDED, (B) THE DATA
CONTAINED HEREIN WILL NOT BE DISCLOSED TO OTHERS,
(C) IT WILL NOT BE REPRODUCED, AND (D) IT WILL BE RETURNED
TO ACRADYNE/AIMCO IMMEDIATELY UPON DEMAND.
8 7 6
D
4
A
REVISION
LEVEL
01/09/12
REVISION
RELEASE DATE
PRODUCTION RELEASE
DESCRIPTION OF CHANGES MADE TO PART
REVISION BLOCK
3
542
ECN #
LHELLER
AUTHOR/
APPROVAL
CATALOG NO.
MODEL NO.
AEP35075AV
AEP35090AV
AEP35110AV
AEP35135AV
AEP35170AV
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
BLOCK TOLERANCING PER DECIMAL:
.X = .030 .XX =
2
.0005
AEP35_ _ _AV
TOOL OUTLINE
5000 SERIES, GEN III
SIZE
D
SCALE 3:4
PART / DRAWING NUMBER
AEP35_ _ _AV
DO NOT SCALE DRAWING
1
REVISION
A
SHEET 3 OF 6
A
B
D
C
F
E
ACRADYNE ANGLE NUTRUNNERS
FEATURES AND BENEFITS
AcraDyne angle nutrunners provide the perfect solution to space-limited fastening applications. A compact, durable head houses a precision right- angle gear set which fits into the tightest spaces and delivers a highly accurate fastening cycle. Lightweight materials and a uniform body diameter provide a comfortable grip. The ergonomically placed start lever ensures simple control.
AEN33060C
AEN33200CF
AEN32015C
AEN35140B
AEN32025CDL
AEN35285B
APPLICATION DATA
MAX
TORQUE TORQUE RANGE
FREE
SPEED
WEIGHT (-)
SOCKET
NM FT-LB
2000 SERIES
AEN32015C(DL) 15
AEN32025C(DL) 25
AEN32030C(F)(DL) 30
11
18
22
AEN32040C(F)(DL) 40
3000 SERIES
AEN33042C(F) 42
30
31
NM
3 - 15
8 - 40
9.5 - 42
FT-LB
2.2 - 11
5.9 - 29
7 - 31
39 12 - 53 8 - 39
RPM
1,481
5 - 20 3.7 - 15 833
6 - 30 4.4 - 22 803
574
1,095
865
LB
2.7
2.7
2.8
2.8
4.4
4.4
KG
1.22
1.22
1.27
1.27
2.00
2.00
AEN33053C(F) 53
AEN33060C(F)(DL) 60
AEN33090C(F)(DL) 90
AEN33120C(F)(DL) 120
44
66
89
12 - 60
18 - 90
24 - 120
9 - 44
13 - 66
18 - 88
845
568
442
6.6
6.6
9.3
2.99
2.99
4.22
AEN33200C(F)(DL) 200 148 40 - 200 29 - 147 245
AEN33210C(F)(DL) 210 95 50 - 210 37 - 155 234
9.4
10.0
4.26
4.54
AEN33300C(F)(DL) 300 221 60 - 300 42 - 221 151 10.0
4.54
AEN33375C(F)(DL) 375 277 75 - 375 55 - 276 151 10.0
4.54
5000 SERIES
AEN35090B(F) 90 66 23 - 90 17 - 66 607 6.9
3.13
AEN35140B(F)
AEN35175B(F)
140 103 35 - 140 26 - 103 472 10.4
4.72
175 129 44 - 175 33 - 129 384 10.5
4.76
AEN35225B(F)
AEN35285B(F)
AEN35350B(F)
225 166
285 210
56 - 225 41 - 166
71 - 285 52 - 210
291
236
12.3
12.3
5.58
5.58
350 258 88 - 350 65 - 258 191 12.3
5.58
* Add “F” to part numbers for flush socket only as noted in the table.
Add “DL” to part numbers for dual levers only as noted in the table.
OUTPUT
SQ. DR
3/8
3/8
3/8
3/8
3/4
3/4
3/4
1/2
3/4
3/4
3/8
3/8
1/2.
1/2.
1/2
3/4
3/4
3/4
3/4
C
D
IN
(A)
MM IN
(B)
MM IN
(C)
MM IN
(D)
MM IN
(E)
MM
14.61
371 1.85
47 1.37
34.8
.90
22.9
.52
13.1
14.61
371 1.85
47 1.37
34.8
.90
22.9
.52 13.1
14.42
366.2
1.85
47 1.65
41.8
1.16
29.4
.70
17.8
14.42
366.2
1.85
47 1.65
41.8
1.16
29.4
.70
17.8
16.63
422.33 1.85
47 1.66 42.11 1.17 29.67
.7
17.78
16.63
422.33 1.85
47 1.66 42.11 1.17 29.67 .7
17.78
18.92
480.53 1.85
47 1.90 48.36 1.37 34.90 .83
20.96
18.92
480.53 1.85
47 1.90 48.36 1.37 34.90 .83
20.96
21.00
533.46 1.85
47 2.78 70.59 2.08 52.81 1.05
26.67
23.21
589.64 1.85
47 2.59 65.75 1.89 47.98 1.05
26.67
23.58 598.88 1.85
47 2.90 73.53 1.97 50.04 1.25
31.75
23.58 598.88 1.85
47 2.90 73.53 1.97 50.04 1.25
31.75
23.58 598.88 1.85
47 2.90 73.53 1.97 50.04 1.25
31.75
22.59
573.7
2.31
58.7 1.90
48.4
1.37
34.9
.81
20.6
22.52
571.9
2.31
58.7 2.59
65.8
1.89
48 1.05
26.7
22.52
571.9
2.31
58.7 2.59
65.8
1.89
48 1.05
26.7
22.88
581.1
2.31
58.7 2.90
73.5
1.97
50 1.25
31.8
22.88
581.1
2.31
58.7 2.90
73.5
1.97
50 1.25
31.8
22.88
581.1
2.31
58.7 2.90
73.5
1.97
50 1.25
31.8
A
B
2000 & 3000 Series
A
B
A
C
D
C
D
B
E
E
Visit our NEW website www.aimco-global.com
ACRADYNE INLINE NUTRUNNERS
FEATURES AND BENEFITS
Due to their compact size and durability, AcraDyne inline nutrunners are the ideal choice for fixtured fastening applications. A uniform body diameter and a hex shaped mounting point allow for simple installation into fixtured plates. A reaction bar for use in handheld applications is also included with all AcraDyne inline nutrunners.
AES32010CV
AES32038CV
AES33040CV
AES35170AV
AES33060C-2
AES35280A
APPLICATION DATA
AES35075AV
AES35090AV
AES35110AV
AES35135AV
AES35170AV
AES35280A
AES35350A
AES35420A
AES35515A
AES35635A
MAX
TORQUE
75
90 66
110
135 100 34 - 135 25 - 100
170 126 43 - 170 32 - 126
280 207 70 - 280 52 - 207
350 258 88 - 350 65 - 258 192
420
515
635
55
81
310
380
469
TORQUE RANGE
19 - 75 14 - 55
23 - 90 17 - 66
28 - 110
105 - 420
128 - 515
21 - 81
78 - 310
95 - 380
159 - 635 117 - 469
FREE
SPEED
944
767
634
515
418
159
129
104
WEIGHT (-)
SOCKET
2000 SERIES*
AES32010C(V)(Q)
AES32025C(V)(Q)
AES32038C(V)
NM FT-LB
10
25
38
7.4
AES32020C(V)(Q) 20 15
18
28
NM FT-LB RPM LB KG
2 - 10 1.5 - 7.4
2,222 2.5
1.13
4 - 20 3.0 - 15 1,250 2.5
1.13
5 - 25 3.7 - 18
7.5 - 38 5.5 - 28
893
595
3.2
4.2
1.45
1.91
3000 SERIES*
AES33040C(V)(-2)
AES33060C(V)(-2)
40
60
30
44
8 - 40 5.9 - 30 1,314 6.4
2.90
12 - 60 8.9 - 44 883 6.4
2.90
AES33100C(V)(-2) 100 74 20 - 100 15 - 74
AES33150CV 150 111 30 - 150 22 - 111
489
329
8.1
8.1
3.67
3.67
AES33150C-2
AES33230CV
AES33230C-2
AES33400C
AES33600C
5000 SERIES
150 111 30 - 150 22 - 111
185 137 46 - 185 34 - 137
230 170 46 - 230 34 - 170
400 295 80 - 400 59 - 295
600 443 120 - 600 89 - 443
329
221
8.1
3.67
8.1
3.67
221 8.1
3.67
122 13.0** 5.90**
82 13.0** 5.90**
9.2
4.17
9.2
4.17
9.2
4.17
9.2
4.17
9.2
4.17
236 12.8
5.81
12.8
12.8
5.81
12.8
5.81
12.8
5.81
5.81
OUTPUT
SQ. DR
IN
3/8*
3/8*
3/8.*
3/8.
1/2
1/2
1/2
1/2.
(A)
IN
(B)
MM
(C)
IN MM IN
(D)
MM
18.24 463.38 1.94 49.28 1.85
18.24 463.38 1.94 49.28 1.85
22.56 572.99 1.94 49.28 1.85
22.56 572.99 1.94 49.28 1.85
47
47
47
47
.68
.68
.68
.68
IN
(E)
MM
17.17 1.59 40.4
17.17 1.59 40.4
17.17 1.59 40.4
17.17 1.59 40.4
3/4
1/2
3/4
3/4.
22.56 572.99 1.94 49.28 1.85
47 .68
17.17 1.59 40.4
22.56 572.99 1.94 49.28 1.85
47 .68
17.17 1.59 40.4
22.56 572.99 1.94 49.28 1.85
47 .68
17.17 1.59 40.4
24.90 632.46 1.94 49.28 1.85
47 1.11 28.08 1.59 40.4
3/4 24.90 632.46 1.94 49.28 1.85
47 1.11 28.08 1.59 40.4
1/2
1/2
1/2.
1/2.
1/2
3/4
3/4
3/4
3/4.
3/4
IN
13.85
13.85
13.85
16.69
* 2000 series tools are available in “V” for Ergo-Drive and Q for 1/4” quick-change models only as noted in the table.
3000 series tools are available in “V” for Ergo-Drive and “-2” models for 2” sliding spindle only as noted in the table.
5000 series tools: “V” indicates extended Ergo-Drive output.
** Includes reaction bar and fixture nut
MM
351.7 1.59
351.7 1.59
351.7 1.59
424 1.50
40.4 1.85
40.4 1.85
40.4 1.85
38.1 1.85
47
47
47
47
.56
.56
.56
.51
14.3 1.59 40.4
14.3 1.59 40.4
14.3 1.59 40.4
12.9 1.59 40.4
21.86
555.2
1.85
47 2.31 58.7
.68
17.4
1.59 40.4
21.86
555.2
1.85
47 2.31 58.7
.68
17.4
1.59 40.4
21.86
555.2
1.85
47 2.31 58.7
.68
17.4
1.59 40.4
21.86
555.2
1.85
47 2.31 58.7
.68
17.4
1.59 40.4
21.86
555.2
1.85
47 2.31 58.7
.68
17.4
1.59 40.4
24.34
618.2
1.85
47 2.31 58.7
1.19
30.1
1.59 40.4
24.34
618.2
1.85
47 2.31 58.7
1.19
30.1
1.59 40.4
24.34
618.2
1.85
47 2.31 58.7
1.19
30.1
1.59 40.4
24.34
618.2
1.85
47 2.31 58.7
1.19
30.1
1.59 40.4
24.34
618.2
1.85
47 2.31 58.7
1.19
30.1
1.59 40.4
2000 & 3000 Series
5000 Series
A
A
D
B C
D
B C
E E
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Visit our NEW website www.aimco-global.com
ACRADYNE FIXTURED NUTRUNNERS
AEF35135AV
Standard Spindle, Rear Exit Cable
AEF35135AVB
Standard Spindle, Bottom Exit Cable
AEF35350A
Standard Spindle, Rear Exit Cable
AEF35135A-2
2” Sliding Spindle, Rear Exit Cable
AEF35135AB-2
2” Sliding Spindle, Bottom Exit Cable
APPLICATION DATA
5000 SERIES* NM
AEF35075A(V)(VB)(-2)(B-2) 75
AEF35090A(V)(VB)(-2)(B-2) 90
AEF35110A(V)(VB)(-2)(B-2) 110
AEF35135A(V)(VB)(-2)(B-2) 135
AEF35170A(V)(VB) 170
AEF35170A(-2)(B-2)
AEF35280A(B)**
AEF35350A(B)**
AEF35420A(B)**
AEF35515A(B)**
AEF35635A(B)**
170
280
350
420
515
635
MAX
TORQUE FT-LB NM
55
66
81
100
125
19 - 75
23 - 90
28 - 110
34 - 135
43 - 170
125
207
258
43 - 170
70 - 280
88 - 350
310 105 - 420
380 128 - 515
469 159 - 635
TORQUE
RANGE
* “V” = standard spindle with rear exit cable. “VB” = standard spindle with bottom exit cable. “B” = bottom exit cable
“-2” = 2” sliding spindle with rear exit cable. “B-2“ = 2” sliding spindle with bottom exit cable.
** Item 28843 is a panel mount 2” sliding spindle for 280 – 635 Nm models.
D
FT-LB
14 - 55
17 - 66
21 - 81
25 - 100
32 - 125
32 - 125
52 - 207
65 - 258
77 - 310
95 - 380
117 - 469
FREE
SPEED RPM
159
129
104
418
236
192
944
767
634
515
418
LB
9.6
13.6
13.6
13.6
13.6
13.6
9.6
9.6
9.6
9.6
9.6
WEIGHT (-)
SOCKET KG
OUTPUT
DRIVE
4.35
1/2 SQ. DR.
4.35
1/2 SQ. DR
4.35
1/2 SQ. DR
4.35
1/2 SQ. DR
4.35
1/2 SQ. DR
4.35
3/4 SQ. DR
6.17
3/4 SQ. DR.
6.17
3/4 SQ. DR
6.17
3/4 SQ. DR
6.17
3/4 SQ. DR
6.17
3/4 SQ. DR
B
E
C
DIMENSIONS
5000 SERIES
AEF35075AV
AEF35090AV
AEF35110AV
AEF35135AV
AEF35170AV
AEF35075A-2
AEF35090A-2
AEF35110A-2
AEF35135A-2
AEF35170A-2
AEF35280A
AEF35350A
AEF35420A
AEF35515A
AEF35635A
*
IN
23.48
23.48
23.48
20.4
20.4
20.4
20.4
20.4
18
23.48
23.48
18
18
18
18
(A) MM IN
457.2
457.2
457.2
457.2
1.85
1.85
1.85
1.85
457.2
1.85
596.3
1.85
596.3
1.85
596.3
1.85
596.3
1.85
596.3
1.85
518.1
518.1
518.1
518.1
518.1
1.85
1.85
1.85
1.85
1.85
(B) IN
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
2.31
MM
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
(C) logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
MM
58.7
58.7
58.7
58.7
58.7
58.7
58.7
58.7
58.7
58.7
58.7
58.7
58.7
58.7
58.7
Visit our NEW website www.aimco-global.com
IN
2.23
2.23
2.23
1.86
1.86
1.86
1.86
1.86
.72
2.23
2.23
.72
.72
.72
.72
A
(D) IN
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
MM
47.1
47.1
47.1
56.6
56.6
56.6
47.1
47.1
18.4
18.4
18.4
18.4
18.4
56.6
56.6
(E) MM
40.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
40.4
ACRADYNE TUBENUT NUTRUNNERS AND SPECIALTY GEARHEADS
FEATURES AND BENEFITS
• Patented safety algorithm
• Transducer senses resistance in the initial 90 degrees of rotation and returns to open upon any resistance encountered
• Durable tubenut head design
• Simple, one-touch back to open operation for maximum productivity
WITH INNOVATIVE SAFETY SENSOR TECHNOLOGY!
AET 2000 Series Model
AET 1000 Series Model
AET 2000 Series Model with Double Levers
APPLICATION DATA
1000 SERIES* NM
AET4AA12018B
AET4AB12025B
14
20
AET4A12025B-KD 25
2000 SERIES* NM
AET32020C(DL)
AET32025C(DL)
20
25
AET32035C(DL)
AET32050C(DL)
35
50
MAX
TORQUE FT-LB
MAX
TORQUE FT-LB
15
18
13
18
18
26
37
NM
3.6 - 14
5 - 20
5 - 25
NM
4 - 16
5 - 20
7 - 28
10 - 40
TORQUE
RANGE
TORQUE
RANGE
FT-LB
2.7 - 11
3.7 - 15
3.7 - 18
FT-LB
3.0 - 12
3.7 - 15
5.2 - 21
7.4 - 30
FREE
SPEED
RPM
516
387
387
FREE
SPEED
RPM
622
466
347
257
LB
3.1
3.1
3.1
LB
3.1
4.0
4.5
5.6
WEIGHT
(-) SOCKET
WEIGHT
(-) SOCKET
KG
KG
IN
1.41
1/4 - 7/16
1.41
3/8 - 5/8
1.41
3/8 - 5/8
IN
1.41
1/4 - 7/16
1.81
3/8 - 5/8
2.04
1/2 - 7/8
2.54
5/8 - 1-3/16
OUTPUT
DRIVE
OUTPUT
DRIVE
NM
7 - 12
10 - 17
10 - 17
NM
7 - 12
10 - 17
13 - 24
17 - 32
* Add “DL” to part numbers for double levers.
Request specific socket size when placing your order. AIMCO offers a wide variety of socket sizes to fit your needs. Contact AIMCO at 1-503-254-6600, or toll free 1-800-852-1368.
SPECIALTY GEARHEADS
AIMCO can provide specialized heads for most any application. Tubenut, Hold and Drive, Crow Foot,
Offsets, and Sliding Spindles are just a few of the head styles available. Whatever the requirements,
AIMCO will recommend the head configuration that will get the job done successfully.
Visit our NEW website www.aimco-global.com
ACRADYNE HOLD & DRIVE NUTRUNNERS
DIMENSIONS
MODEL
AEH4F12020B-1
AEH4F12026B-1
AEH32025C-1
AEH32030C-1
AEH32040C-1
AEH33042C-1
AEH33053C-1
AEH33060C-1
AEH33090C-1
AEH33120C-1
AEH33200C-1
AEH35090B-1
AEH35140B-1
AEH35175B-1
AEH35225B-1
AEH35285B-1
AEH35350B-1
FEATURES AND BENEFITS
• Torques ranging from 20 Nm – 200 Nm
• Very robust design
• 1” and 2” travels are standard
• Sockets and holders are custom
AEH33120C-1
AEH32040C-1
APPLICATION DATA
MODEL*
AEH4F12020B-(1,2)
AEH4F12026B-(1,2)
AEH32025C-(1,2)
AEH32030C-(1,2)
AEH32040C-(1,2)
AEH33042C-(1,2)
AEH33053C-(1,2)
AEH33060C-(1,2)
AEH33090C-(1,2)
AEH33120C-(1,2)
AEH33200C-(1,2)
AEH35090B-(1,2)
AEH35140B-(1,2)
AEH35175B-(1,2)
AEH35225B-(1,2)
AEH35285B-(1,2)
AEH35350B-(1,2)
NM
140
175
225
285
350
53
60
90
120
200
90
30
40
42
20
26
25
MAX
TORQUE FT-LB
103
129
166
210
258
39.
44
66
89
148
66
22
30
31
15
19
18
* Add “1” to part numbers for 1” travel. Add “2“ to part numbers for 2” travel.
NM
4 - 20
5 - 26
5 - 25
6 - 30
8 - 40
10 - 42
12 - 53
12 - 60
18 - 90
24 - 120
40 - 200
23 - 90
35 - 140
44 - 175
56 - 225
71 - 285
88 - 350
TORQUE
RANGE
E
D
F
29 - 148
17 - 66
26 - 103
33 - 129
41 - 166
52 - 210
65 - 258
FT-LB
3 - 15
4 - 19
4 - 18
4 - 22
6 - 30
7 - 31
8 - 39
9 - 44
13 - 66
FREE SPEED
RPM
533
432
833
803
574
1,095
865
845
568
7
442
291
236
191
245
607
472
384
26.92mm
1.060in
WEIGHT LB
MIN/MAX
SOCKET
-1 = 2.8
-2 = 3.0
9/16 (14 MM) / 13/16, (21 MM)
-1 = 2.8
-2 = 3.1
9/16 (14 MM) / 13/16, (21 MM)
-1 = 3.5
-2 = 3.5
9/16 (14 MM) / 13/16, (21 MM)
-1 = 3.5
-2 = 3.6
9/16 (14 MM) / 13/16, (21 MM)
-1 = 3.5
-2 = 3.7
9/16 (14 MM) / 13/16, (21 MM)
-1 = 5.6
-2 = 5.8
9/16 (14 MM) / 13/16, (21 MM)
-1 = 5.6 -2 = 5.8
9/16 (14 MM) / 13/16, (21 MM)
-1 = 7.3
-2 = 7.5
9/16 (14 MM) / 1-1/4, (32 MM)
-1 = 7.3
-2 = 7.6
9/16 (14 MM) / 1-1/4, (32 MM)
-1 = 10.0 -2 = 10.3
5/8 (15 MM) / 1-1/4, (32 MM)
-1 = 10.0
-2 = 10.4
5/8 (16 MM) / 1-1/4, (32 MM)
-1 = 7.6
-2 = 7.9
9/16 (14 MM) / 1-1/4, (32 MM)
-1 = 10.6
44.45mm
1.750in
-2 = 11.0
42.07mm
1.656in
5/8 (15 MM) / 1-1/4, (32 MM)
-1 = 10.6
-2 = 11.1
5/8 (15 MM) / 1-1/4, (32 MM)
-1 = 12.9
-2 = 13.3
3/4 (19MM) / 1-1/4, (32 MM)
-1 = 12.9
-2 = 13.3
3/4 (19MM) / 1-1/4, (32 MM)
-1 = 12.9
-2 = 13.3
174.32mm
3/4 (19MM) / 1-1/4, (32 MM)
40.39mm
1.590in
2
A
1
IN
14.59
14.59
14.59
14.59
14.59
16.79
16.79
18.92
18.92
21.00
23.21
22.63
22.52
22.52
22.92
22.92
22.92
C
B
35.56mm
1.400in
38.50mm
1.516in
36.51mm
1.438in
C D
(A) MM IN
589.5
574.8
571.9
571.9
582.2
582.2
582.2
370.7 1.59
370.7 1.59
370.7 1.85
370.7 1.85
370.7 1.85
426.5
1.85
426.5 1.85
480.5
480.5
533.5
1.96
1.96
1.96
1.96
2.31
2.31
2.31
2.31
2.31
2.31
(B) MM IN
3.72
3.72
8
3.72
3.72
3.72
3.72
3.72
4.04
4.04
4.87
4.87
4.02
4.87
4.87
5.52
5.52
5.52
47
47
47
40.4
47
47
49.8
49.8
49.8
49.8
58.7
58.7
58.7
58.7
58.7
58.7
Visit our NEW website www.aimco-global.com
E
(C)
7
MM
94.4
94.4
94.4
94.4
94.4
94.4
94.4
102.5
102.5
123.7
123.7
102.1
123.7
123.7
140.1
140.1
140.1
IN
3.17
3.17
4.09
3.36
4.09
4.09
5.52
5.52
5.52
3.17
3.17
3.17
3.17
3.37
3.37
4.09
B
(D)*
5
MM IN
DOCUMENT CONTROL
PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED TO BE
UNCONTROLLED DOCUMENTS. HOLDERS ARE RESPONSIBLE FOR
PROPRIETARY AND CONFIDENTIAL
THIS DRAWING CONTAINS INFORMATION STRICTLY
CONFIDENTIAL TO ACRADYNE/AIMCO. IN THE ABSENCE
80.6
CONTAINED HEREIN WILL NOT BE DISCLOSED TO OTHERS,
(C) IT WILL NOT BE REPRODUCED, AND (D) IT WILL BE RETURNED
TO ACRADYNE/AIMCO IMMEDIATELY UPON DEMAND.
80.6
80.6
80.6
80.6
80.6
4
A
.76
.76
LEVEL
.76
85.66
85.66
.94
.94
103.82
1.13
.76
.76
.76
.76
09/21/12
REVISION
RELEASE DATE
103.82
1.13
85.26
1.32
103.82
1.13
103.82
1.13
112.2
112.2
112.2
1.32
1.32
1.32
(E)
PRODUCTION RELEASE
DESCRIPTION OF CHANGES MADE TO PART
REVISION BLOCK
3
MM
19.3
725
ECN #
AUTHOR/
APPROVAL
19.3
19.3
19.3
19.3
19.3
23.9
23.9
28.6
28.6
33.4
28.6
28.6
33.4
33.4
33.4
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
BLOCK TOLERANCING PER DECIMAL:
.X = .030 .XX = .010 .XXX = .005 .XXXX =
REMOVE BURRS AND SHARP EDGES: R.015 MAX
MACHINE SURFACE FINISH: 125 RMS OR BETTER
.0005
2
AEH33053A-1 H & D NUTRUNNER, 1" TVL.
TOOL OUTLINE
GEN 3, 3000 SERIES
SIZE
D
SCALE 1 : 1
PART / DRAWING NUMBER
AEH33053A-1
DO NOT SCALE DRAWING
1
REVISION
A
SHEET 2 OF 2
A
C
B
D
F
E
ACRADYNE MID-EXIT CABLE NUTRUNNERS
FEATURES AND BENEFITS
• Length
- Reduced tool length due to cable exiting in front of grip surface
• Ergonomics
- Reduced torque reaction compared to pistolstyle tools
- The inline handle, coupled with the ergonomic hand positioning, allows for increased leverage and decreased strain on the wrist
• Cable management
- If used with a spring balancer, the tool hangs naturally near its center of gravity, the cable is controlled by the balancer
- Front positioning of cable provides for easy cable management
Inline
Angle:
Square Drive
Angle:
Flush Socket
Offset
Straight
Patent Pending
Specialized heads and blades available by request.
Contact AIMCO at 1-503-254-6600, or toll free 1-800-852-1368.
APPLICATION DATA
MODEL*
AEN4C22015BM(F)
AEN4F22030BM(F)
AEN4F22037BM(F)
AEN4F22044BM(F)
AES4A22020BVM
AES4A22025BVM
AES4A22030BVM
AES4A22040BVM
NM
44
20
25
30
40
15
30
37
E
F
MAX
TORQUE
8
FT-LB
32
15
18
22
30
11
22
29
7
NM
3.75 - 15
7.5 - 30
9.25 - 37
11 - 40
5 - 20
6.3 - 25
7.5 - 30
10 - 40
40.39mm
1.59in
6
TORQUE
RANGE
F
E
33.35mm
1.31in
5
FT-LB
2.77 - 11
8
5.53 - 22
6.82 - 29
8.11 - 29
3.7 - 15
165.89mm
6.53in
4.6 - 18
5.5 - 22
7.4 - 30
4
FREE
SPEED RPM LB
7
700
675
533
432
1050
830
672
525
3
6
WEIGHT (-)
SOCKET
2.4
2.4
2.4
2.6
3.3
3.3
3.3
2.4
11.94mm
.47in
2
21.08mm
.83in
5
6.35mm
.25in
14.15mm
.56in
108.80mm
4.28in
KG
1
1.18
4
1.50
1.50
1.50
37.34mm
1.47in
1.09
1.09
1.09
1.09
F
E
A
D
D
OUTPUT
DRIVE
3/8 sq. dr.
3/8 sq. dr.
3/8 sq. dr.
3/8 sq. dr.
3/8 sq. dr.
3/8 sq. dr.
3/8 sq. dr.
40.51mm
1.60in
2
40.39mm
1.59in
1
DIMENSIONS
MODEL IN
AEN4C22015BM 9.02
AEN4F22030BM 11.24
AEN4F22037BM 11.24
AEN4F22044BM 11.24
AES4A22020BM 9.0
AES4A22025BM 9.0
AES4A22030BM 9.0
AES4A22040BM 9.0
(A)
C
B
MM IN
A
229.1
1.47
285.6
1.47
8
285.6
1.47
285.6
1.47
228.1
1.47
228.1
1.47
228.1
1.47
228.1
1.47
3/8" SQ. DR.
(B)
43.64mm
1.72in
43.64mm
1.72in
C
MUTI FUNCTION
BUTTON
7
C
F
C
C D
E
MM IN
37.3
1.29
37.3
1.66
6
37.3
1.66
37.3
1.66
37.3
3.49
37.3
3.49
37.3
3.49
37.3
3.49
(C)
B
A
10000 SE PINE STREET
503.254.6600
15.88mm
.63in
B
B
A
5
MM
DOCUMENT CONTROL
IN
PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED TO BE
UNCONTROLLED DOCUMENTS. HOLDERS ARE RESPONSIBLE FOR
VERIFYING THE CURRENT REVISION LEVEL WITH PURCHASING OR
VERSION OF THIS DOCUMENT IS ELECTRONICALLY MAINTAINED.
32.8
.82
CONFIDENTIAL TO ACRADYNE/AIMCO. IN THE ABSENCE
HAS LOANED THIS COPY WITH THE MUTUAL UNDERSTANDING
THAT (A) IT WILL NOT BE USED FOR ANY PURPOSE OTHER 42.1
1.17
42.1
1.17
42.1
1.17
88.6
88.6
88.6
88.6
4
A
381mm
15.00in
B
TOOL MODEL
AEN4F22030BM
AEN4F22037BM
AEN4F22044BM
(D)
08/03/12
MM
DESCRIPTION OF CHANGES MADE TO PART
REVISION BLOCK
29.7
3
IN (E)
DIMENSIONS ARE IN INCHES
SURFACE ROUGHNESS PER ANSI Y14.36
PRODUCTION RELEASE
20.9
.52
676
M. JULIANO
ECN #
.70
BLOCK TOLERANCING PER DECIMAL:
.X = .030 .XX = .010 .XXX =
ANGLE =
.005 .XXXX =
0 30'
2
7
29.7
29.7
6
.70
.70
5
—
—
—
—
MM IN
AEN4F220_ _BM ANGLE NUTRUNNER
GEN 4, 2000 SERIES
.0005
DOCUMENT CONTROL
PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED TO BE
UNCONTROLLED DOCUMENTS. HOLDERS ARE RESPONSIBLE FOR
SIZE
D
13.1
PART / DRAWING NUMBER
AEN4F220_ _BM
5.53
REVISION
A
17.8
CONFIDENTIAL TO ACRADYNE/AIMCO. IN THE ABSENCE
HAS LOANED THIS COPY WITH THE MUTUAL UNDERSTANDING
1
5.73
08/28/12
THAN FOR THAT IN WHICH IT WAS PROVIDED, (B) THE DATA
CONTAINED HEREIN WILL NOT BE DISCLOSED TO OTHERS,
17.8
4
A
REVISION
LEVEL
5.73
A
17.8
5.73
—
—
—
—
(F)
PRODUCTION RELEASE
DESCRIPTION OF CHANGES MADE TO PART
REVISION BLOCK
—
—
—
—
3
MM
140.4
145.6
699 LHELLER
AUTHOR/
APPROVAL
ECN #
145.6
145.6
DIMENSIONS ARE IN INCHES
SURFACE ROUGHNESS PER ANSI Y14.36
BLOCK TOLERANCING PER DECIMAL:
.X = .030 .XX =
2
TOOL MODEL
AES4A22020BVM
AES4A22025BVM
AES4A22030BVM
AES4A22035BVM
AES4A22040BVM
AES4A220_ _BVM INLINE NUTRUNNER
GEN 4, 2000 SERIES
.0005
SIZE
D
SCALE 1:1
PART / DRAWING NUMBER
AES4A220_ _BVM
DO NOT SCALE DRAWING
1
REVISION
A
SHEET 2 OF 2
A
B
C
D
E
F
Visit our NEW website www.aimco-global.com
ACRADYNE RIV-NUT NUTRUNNERS
FEATURES AND BENEFITS
• Top and rear exit cable are standard
• Straight, Fixtured, and Push-to-Start models are available by request. Contact AIMCO at 1-503-254-6600, or toll free 1-800-852-1368.
Top Exit Cable Rear Exit Cable Bottom Exit Cable
A
B
C
D
E
F
APPLICATION DATA
MODEL*
AEP4(A)(R)(T)12006BR
AEP4(A)(R)(T)12011BR
AEP4(A)(R)(T)12014BR
8
AEP4(A)(R)(T)12018BR
AEP4(A)(R)(T)12022BR
AEP4(A)(R)(T)22020BR
AEP4(A)(R)(T)22025BR
AEP4(A)(R)(T)22030BR
AEP4(A)(R)(T)22040BR
22
20
25
30
40
7
MAX
TORQUE
NM FT-LB
6
11
14
18
TORQUE RANGE
NM FT-LB
FREE
SPEED
RPM
4.4
1.5 - 6 1.1 - 4.4
2,625
8.1
2.8 - 11 2 - 8.1
1,313
10
13
3.5 - 14 2.6 - 10
6
4.5 - 18 3.3 - 13
5
1,037
840
16
15
18
22
30
5.5 - 22
5 - 20
6.3 - 25
7.5 - 30
10 - 40
4.1 - 16
3.7 - 15
4.6 - 18
5.5 - 22
7.4 - 30
656
1,313
1,037 34.9mm
1.38in
840
656
WEIGHT (-)
SOCKET
LB KG
2.2
1.00
2.3
1.04
2.3
1.04
4
2.3
1.04
2.3
1.04
2.4
1.09
2.4
1.09
2.4
1.09
2.4
1.09
OUTPUT
SQ DR
37.3mm
1.47in
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
IN
(A)
MM IN
(B)
MM
* Add “A” to part numbers for bottom exit cable models, Add “R” to part numbers for rear exit cable models, Add “T” to part numbers for top exit cable models.
IN
(C)
MM IN
(D)*
MM
9.68 245.9
1.05 26.7
6.01
152.6
1.96 49.8
9.68 245.9
1.05 26.7
6.87 174.5
1.96 49.8
9.68 245.9
1.05 26.7
6.87 174.5
1.96 49.8
3 2 1
9.68 245.9
1.05 26.7
6.87 174.5
1.96 49.8
9.68 245.9
1.05 26.7
6.87 174.5
1.96 49.8
10.18 258.6
1.05 26.7
6.87 174.5
1.96
F
49.8
10.18 258.6
1.05 26.7
2 PLACES 180° APART
6.87 174.5
1.96 49.8
10.18 258.6
1.05 26.7
6.87 174.5
1.96 49.8
10.18 258.6
1.05 26.7
6.87 174.5
1.96 49.8
E
41mm
1.61in
A
TOOL HEADLIGHTS
B
D
GEARING STEPS
SINGLE STEP
DOUBLE STEP
MODEL NO.
AEP4A12006BR
AEP4A12014BR
AEP4A12022BR
C
C
38.1mm
1.50in
6
D
10000 SE PINE STREET
PORTLAND, OREGON 97216
503.254.6600
5
DOCUMENT CONTROL
PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED TO BE
UNCONTROLLED DOCUMENTS. HOLDERS ARE RESPONSIBLE FOR
VERIFYING THE CURRENT REVISION LEVEL WITH PURCHASING OR
VERSION OF THIS DOCUMENT IS ELECTRONICALLY MAINTAINED.
PROPRIETARY AND CONFIDENTIAL
CONFIDENTIAL TO ACRADYNE/AIMCO. IN THE ABSENCE
OF EXPRESSED WRITTEN PERMISSION, ACRADYNE/AIMCO
HAS LOANED THIS COPY WITH THE MUTUAL UNDERSTANDING
THAT (A) IT WILL NOT BE USED FOR ANY PURPOSE OTHER
THAN FOR THAT IN WHICH IT WAS PROVIDED, (B) THE DATA
CONTAINED HEREIN WILL NOT BE DISCLOSED TO OTHERS,
(C) IT WILL NOT BE REPRODUCED, AND (D) IT WILL BE RETURNED
TO ACRADYNE/AIMCO IMMEDIATELY UPON DEMAND.
4
A
02/26/13 PRODUCTION RELEASE
DESCRIPTION OF CHANGES MADE TO PART
REVISION BLOCK
3
853
ECN #
M. JULIANO
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
DIMENSIONS AND TOLERANCING PER ANSI Y14.5
SURFACE ROUGHNESS PER ANSI Y14.36
BLOCK TOLERANCING PER DECIMAL:
.X = .030 .XX = .010 .XXX =
ANGLE =
.005 .XXXX =
0 30'
REMOVE BURRS AND SHARP EDGES: R.015 MAX
MACHINE SURFACE FINISH: 125 RMS OR BETTER
DRAWINGS AND TECHNICAL DOCUMENTS CONTROLLED BY:
ACRADYNE MECHANICAL ENGINEERING
2
.0005
AEP4A120_ _BR
OUTLINE DRAWING
GEN 4, 1000 SERIES
SIZE
D
SCALE 1 : 1
PART / DRAWING NUMBER
AEP4A120_ _BR
DO NOT SCALE DRAWING
1
REVISION
A
SHEET 2 OF 2
A
B
8 7
Visit our NEW website www.aimco-global.com
ACRADYNE HIGH TORQUE DC TOOLS
Critical bolting demands tools that deliver high torque with superior performance. Couple with AcraDyne’s Controller, the HT Series tools combine these features in an electric, high-torque bolting system that beats the competition in accuracy, speed, and safety.
FEATURES AND BENEFITS
• One of the most accurate high-torque tools in the world today
• Up to 100 times faster than hydraulic tools
• 250 Nm – 12,000 Nm
• Ergonomic, robust design with five handle configurations
• Over 300 models to choose from
• Built-in integral transducer for optimal monitoring and control
• The world’s ONLY traceable system at the square drive
• Data retrieval
• Designed and
MADE IN THE USA
Pistol Type
(AEP)
Rear Mounted Pistol
(AED)
Axial Type
(AEJ)
FIXED GEARCASE
MODEL* SERIES
Straight Lever Type (AES)
APPROX. TORQUE APPROX. SPEED
NM FT-LB RPM
(AEP) (AED) (AES) (AEJ) (AEF)4A66250B
(AEP) (AED) (AES) (AEJ) (AEF)4A66425B
(AEP) (AED) (AES) (AEJ) (AEF)4A66625B
(AEP) (AED) (AES) (AEJ) (AEF)4A66925B
(AEP) (AED) (AES) (AEJ) (AEF)4A771200B
(AEP) (AED) (AES) (AEJ) (AEF)4A773000B
6000
6000
6000
6000
7000
7000
(AEP) (AED) (AES) (AEJ) (AEF)4A884200B1
(AEP) (AED) (AES) (AEJ) (AEF)4A884200B
8000
8000
4,200
4,200
(AEP) (AED) (AES) (AEJ) (AEF)4A885000B 8000 5,000
(AEP) (AED) (AES) (AEJ) (AEF)4A896500B 8000/9000 6,500
(AEP) (AED) (AES) (AEJ) (AEF)4A898100B 8000/9000 8,100
(AEP) (AEJ)4A8X12000B 8000/9000 12,000
250
425
625
925
1,200
3,000
185
315
460
682
885
2,213
3,100
3,100
3,700
4,800
6,000
8,850
* Add “B” to the end of the model number for bottom exit cable (AEF fixtured models only).
9
7
12
12
5
3.5
315
165
106
72
65
25
Fixtured Type
(AEF)
WEIGHT
KG LB
LENGTH
MM IN
DIA.
MM IN
DRIVE SOUND LEVEL
IN dB(A)
4.6
10.5
254
4.6
10.5
254
4.8
10.5
254
4.8
10.5
254
10
10
10
10
66
66
66
66
2.6
2.6
2.6
2.6
6.6
14.5
259 10.2
76 3.0
7.5
16.5
294 11.6
76 3.0
0.75
0.75
0.75
0.75
1
1
11.1
24.5
340 13.4
86 3.6
1
11.1
24.5
340 13.4
86 3.6
1.5
11.1
24.5
340 13.4
86 3.6
1.5
15.7
34.5
378 14.9
101 4.0
1.5
15.7
34.5
378 14.9
101 4.0
1.5
23.0
51.0
526 21 131 5.2
1.5
66
66
66
66
66
66
66
66
66
66
66
66
360° SWIVEL GEARCASE
MODEL
(AEP) (AEJ)4B66250B
(AEP) (AEJ)4B66425B
(AEP) (AEJ)4B66625B
(AEP) (AEJ)4B66925B
(AEP) (AEJ)4B771200B
(AEP) (AEJ)4B773000B
(AEP) (AEJ)4B884200B1
(AEP) (AEJ)4B884200B
(AEP) (AEJ)4B885000B
(AEP) (AEJ)4B896500B
(AEP) (AEJ)4B898100B
(AEP) (AEJ)4B8X12000B
SERIES
APPROX. TORQUE APPROX. SPEED
NM FT-LB RPM
6000
6000
6000
6000
7000
7000
8000
8000
8000
8000/9000
5,000
6,500
8000/9000 8,100
8000/9000 12,000
250
425
625
925
1200
3,000
4,200
4,200
185
315
460
682
885
2,213
3,100
3,100
3,700
4,800
6,000
8,850
72
65
25
12
12
315
165
106
9
7
5
3.5
WEIGHT
KG LB
5.5
7.3
8.2
11.8
11.8
5.3
5.3
5.5
11.8
16.4
26
36
16.4
36
24.0
52.5
12
16
18
26
26
12
12
12
LENGTH
MM IN
305
305
305
305
310
345
391
391
391
429
429
564
MM
DIA.
IN
12
12.2
13.6
15.4
15.4
12
12
12
66
66
66
2.6
2.6
2.6
66 2.6
76 3.0
76 3.0
86 3.6
86 3.6
15.4
86 3.6
16.9
101 4.0
16.9
101 4.0
22 131 5.2
DRIVE SOUND LEVEL
IN dB(A)
0.75
0.75
0.75
0.75
1
1
1
1.5
1.5
1.5
1.5
1.5
66
66
66
66
66
66
66
66
66
66
66
66
Visit our NEW website www.aimco-global.com
ACRADYNE HIGH TORQUE DC ANGLE TOOLS
FEATURES AND BENEFITS
• Transducerized closed loop control at the output like all
AcraDyne HT-Series tools
• These low-profile head, small-diameter, lever-operated tools, with the torque measured at the output, offer a unique solution
• The torque reported is the torque delivered
• One of the most accurate high-torque right-angle tools in the world
• Smallest tools of their kind on the market
• Same durable, high-cycle gearing as our other HT-series tools
• Models up to 12,000 Nm available upon request
AEN3571000A
AEN356540A
SPECIFICATIONS
MODEL
AEN356540A
AEN3571000A
AEN3571600A
AEN3572600A
MAX. TORQUE*
NM FT-LB
540
1,000
398
737
1,600
2,600
1,180
1,917
AEN3571600A AEN3572600A
TORQUE RANGE
NM FT-LB
135 – 540
250 – 1,000
100 – 398
184 – 737
400 – 1,600
650 – 2,600
295 – 1,180
479 – 1,917
FREE SPEED
RPM
109
61
33
21
LB
WEIGHT
KG
13.1
16.3
5.95
7.39
16.7
18.5
7.57
8.40
OUTPUT DRIVE
3/4” Square Drive
1” Square Drive
1” Square Drive
1” Square Drive
DIMENSIONS
AEN356540A
AEN3571000A
AEN3571600A
AEN3572600A
IN
22.58
22.92
22.92
22.92
A
MM
573.6
582.2
582.2
582.2
IN
2.31
2.31
2.31
2.31
B
MM
58.7
58.7
58.7
58.7
IN
4.75
5.36
5.36
6.77
C
MM
120.6
136.1
136.1
171.9
IN
4.05
4.44
4.44
5.86
D
MM
102.8
112.7
112.7
148.8
IN
1.33
1.53
1.53
1.53
E
MM
33.7
38.7
38.7
38.7
Visit our NEW website www.aimco-global.com
ACRADYNE HIGH TORQUE DUAL LEVER AND GEARHEAD TOOLS
DUAL LEVER TOOLS
FEATURES AND BENEFITS
• Additional safety when using a tool with a reaction bar or nose extension
• Requires both hands to start the tool, keeping hands clear of application
• Helps avoid accidental starting of the tool
• Available in three handle types: “Handle Bar” (F) style,
Straight (S) style with side handle, and Pistol (P) style
AEF Type
AES Type
AEP Type
MODEL*
(HANDLE TYPE)
AE(S)(F)(P)4(A)(B)66250
AE(S)(F)(P)4(A)(B)66425BDL
AE(S)(F)(P)4(A)(B)66625BDL
AE(S)(F)(P)4(A)(B)66925BDL
AE(S)(F)(P)4(A)(B)771200BDL
AE(S)(F)(P)4(A)(B)773000BDL
AE(S)(F)(P)4(A)(B)884200B1DL
AE(S)(F)(P)4(A)(B)884200BDL
AE(S)(F)(P)4(A)(B)885000BDL
AE(S)(F)(P)4(A)(B)896500BDL
AE(S)(F)(P)4(A)(B)898100BDL
AEF4(A)(B)8912000BDL
SERIES
APPROX.
TORQUE
NM FT-LB
APPROX.
SPEED
RPM
315
165
106
72
65
25
12
12
9
7
5
3.5
WEIGHT
KG LB
4.6
4.6
4.8
4.8
6.6
7.5
11.1
11.1
11.1
15.7
15.7
23.0
10.5
10.5
10.5
10.5
14.5
16.5
24.5
24.5
24.5
34.5
34.5
51.0
LENGTH
MM IN
* The fifth digit of the model number is “A” for fixed gearcase models and “B” for 360° swivel gearcase models.
- Above data is for 360° swivel gearcase models. For non-clutched models, reduce weight by 1.5 lb (0.7 kg) and length by 2 in (51 mm).
- For Straight Type tools Choose the position of the handle by adding (L) for left side and (R) for right side
340
340
340
378
378
526
254
254
254
254
259
294
13.4
13.4
13.4
14.9
14.9
21
10
10
10
10
10.2
11.6
MM
DIA.
IN
86
86
86
101
101
131
66
66
66
66
76
76
3.6
3.6
3.6
4.0
4.0
5.2
2.6
2.6
2.6
2.6
3.0
3.0
DRIVE
IN
1
1.5
1.5
1.5
1.5
1.5
0.75
0.75
0.75
0.75
1
1
SOUND
LEVEL dB(A)
66
66
66
66
66
66
66
66
66
66
66
66
HT GEARHEAD TOOLS
FEATURES AND BENEFITS
• Custom made to fit virtually any application
• Same durable gearing as found on AcraDyne’s standard HT series tools
• Model types available:
- HT Offset Gearhead tools
- HT Right Angle with Offset Gearhead tools
- HT Right Angle Air tools with Offset Gearhead
Visit our NEW website www.aimco-global.com
ACRADYNE HIGH TORQUE ACCESSORIES
NOSE EXTENSIONS
FEATURES AND BENEFITS
• Ideal for hard-to-reach applications when a torque tube, or arm, is not desirable
• A cost-effective, more flexible option compared to a multiple spindle system
• Common applications:
- Wheel install and repair stations
- Large flange assembly
- Mining vehicle shovel bolts
- Railway equipment maintenance
- Oil and gas industry well fixtures
ACCESSORIES
Custom accessories are available for your application; contact an
AIMCO Customer Service Associate for details, 1-503-254-6600, or toll free 1-800-852-1368.
Hoist Ring
Swivel Handle
Swivel Bail
MODEL DESCRIPTION
25291
26479
26332
25289
26336
26477
26327
26630
26478
26328
26337
28514
28549
27045
30300
Swivel Bail, 6000 Series
Swivel Bail, 7000 Series
Swivel Bail, 8000 Series
Swivel D-Handle, 6000 Series
Swivel D-Handle, 7000 Series
Swivel D-Handle, 8000 Series
Stationary Bail, 6000 series (26336 handle not included)
Stationary Bail, 7000 series (26336 handle not included)
Stationary Bail, 8000 series (26336 handle not included)
Fixed Handle (for use with 26479, 26332, 25289)
Rear Fixed Hoist Ring, 6000/7000/8000 Series Pistols
Rear Folding Hoist Ring Kit for 8000 Series Pistols
Sliding Spindle, 6000 Series
Sliding Spindle, 7000 Series
Sliding Spindle, 8000 Series
REACTION BARS
Fixed
Handle
Fixed
Handle with Hoist
Ring
HT tool includes a standard, spline attachment reaction device. Custom reaction devices are available; contact an
AIMCO Customer
Service Associate for more details,
1-503-254-6600, or toll free 1-800-
852-1368.
Single Ended Flat
Single Ended Offset
Double Ended Flat
Double Ended Offset
MODEL DESCRIPTION
26810
26800
25277
27255
26815
26885
27200
26890
25274
25275
26840
6000 Series
7000 Series
8000 Series
9000 Series
2.375” Offset, 6000 Series
4.00” Offset, 6000 Series
3.10” Offset, 7000 Series
4.00” Offset, 7000 Series
3.35” Offset, 8000 Series
4.00” Offset, 8000 Series
3.35” Offset, 9000 Series
26830
26820
25278
6000 Series
7000 Series
8000 Series
25276 3.35” Offset, 8000 Series
PROTECTIVE COVERS
Durable protective covers prevent marring and damage.
MODEL
BJ10078
BJ10077
BJ10076
DESCRIPTION
Protective Cover, 6000 Series
Protective Cover, 7000 Series
Protective Cover, 8000 Series
Visit our NEW website www.aimco-global.com
DC TOOLS: TOOL/SPINDLE SELECTION GUIDE
LENGTH WEIGHT
MODEL RPM** IN MM LB KG
ANGLE
AEN4C12004B
AEN4C12009B
AEN4C12014B
AEN4C12018B
AEN4C12022B
AEN32015C
AEN32025C
AEN32030C
AEN32040C
AEN33042C
AEN33053C
1,481
833
803
574
1,095
1,095
3,111 11.65 295.9
2.0
0.91
1,750 11.00 279.5
2.2
1.00
875
691
560
11.66 296.4
11.66 296.4
11.66 296.4
2.2
2.2
2.2
1.00
1.00
1.00
14.6
14.6
14.4
371.0
371.0
366.2
2.7
2.7
2.8
1.22
1.22
1.27
14.4
366.2
2.8
1.27
16.6
422.3
4.4
2.00
16.6
422.3
4.4
2.00
AEN33060C
AEN33090C
AEN33120C
AEN33200C
AEN33210C
AEN33300C
245
234
151
845
568
442
18.9
480.5
6.6
2.99
18.9
480.5
6.6
2.99
21.0
533.5
9.3
4.22
23.2
589.6
9.4
4.26
23.6
599.9 10.0
4.54
23.6
599.0 10.0
4.54
AEN33375C
AEN35090B
AEN35140B
151
607
472
23.6
599.0 10.0
4.54
22.6
573.7
6.9
3.13
22.5
571.9
10.4
4.72
AEN35175B
AEN35225B
AEN35285B
AEN35350B
INLINE
384
291
236
191
22.5
22.9
22.9
22.9
571.9
10.5
581.1 12.3
581.1 12.3
581.1 12.3
4.76
5.58
5.58
5.58
AES4A12003BQ 2,625 11.12
282.7 2.0
0.91
AES33150CV
AES33230CV
AES33230C-2
AES33400CV
AES33600CV**
AES35075AV
AES35090AV
AES35110AV
AES35135AV
AES35170AV
AES35280A
AES35350A
AES35420A
AES35515A***
AES35635A****
AES4A12006BQ 2,625 11.12
282.7 2.0
0.91
AES4A12011BV 1,313 11.44
290.5 2.2
1.00
AES4A12014BV 1,037 11.44
290.5 2.2
1.00
AES4A12018BV 840 11.44
290.5 2.2
1.00
AES4A12022BV 656 11.44
290.5 2.2
1.00
AES32010CV 2,222 13.9
351.7 2.5
1.13
AES32020CV
AES32025CV
AES32038CV
AES33040CV
AES33060CV
AES33100CV
1,250
893
595
13.9
13.9
16.7
351.7 2.5
351.7 3.2
424.0 4.2
1.13
1.45
1.91
1,314 18.2
463.4 6.4
2.90
883 18.2
463.4 6.4
2.90
489 22.6
573.0 8.1
3.67
329 22.6
573.0 8.1
3.67
221 22.6
573.0 8.1
3.67
221 22.6
573.0 8.1
3.67
122 24.9
632.5 13.0* 5.90*
82 24.9
632.5 13.0* 5.90*
944 21.9
555.2 9.2
4.17
767 21.9
555.2 9.2
4.17
634 21.9
555.2 9.2
4.17
515 21.9
555.2 9.2
4.17
418 21.9
555.2 9.2
4.17
236 24.2
615.1 12.8
5.81
192 24.2
615.1 12.8
5.81
159 24.2
615.1 12.8
5.81
129 24.2
615.1 12.8
5.81
104 24.2
615.1 12.8
5.81
* Includes reaction bar and fixture nut.
** Torque Range: 120-480 Nm Max Torque: 600 Nm
*** Torque Range: 128-515 Nm
**** Torque Range: 159-635 Nm
TORQUE, Nm
5 10 15 20 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450
Recommended Torque Range Max Torque
Visit our NEW website www.aimco-global.com
DC TOOLS: TOOL/SPINDLE SELECTION GUIDE
LENGTH WEIGHT
MODEL RPM** IN MM LB KG
PISTOL
AEP4_12003B_
AEP4_12006B_
AEP4_12011BV
AEP4_12014BV
AEP4_12018BV
AEP4_12022BV
AEP4_22020BV
AEP4_22025BV
AEP4_22030BV
AEP4_22035BV
AEP4_22040BV
2,625 7.3
186.3
2.2
1.00
2,625 7.3
186.3
2.2
1.00
1,313 8.0
203.3
2.3
1.04
1,037 8.0
203.3
2.3
1.04
840 8.0
203.3
2.3
1.04
656 8.0
203.3
2.3
1.04
1,313 8.7
219.9
2.4
1.09
1,037 8.7
219.9
2.4
1.09
840
747
656
8.7
8.7
8.7
219.9
219.9
219.9
2.4
2.4
2.4
1.09
1.09
1.09
AEP35075AV
AEP35090AV
AEP35110AV
AEP35135AV
AEP35170AV
AEP35280A
515
418
236
944
767
634
16.0
405.2
9.2
4.17
16.0
405.2
9.2
4.17
16.0
405.2
9.2
4.17
16.0
405.2
9.2
4.17
16.0
405.2
9.2
4.17
18.4
468.2 13.6
6.17
AEP35350A
AEP35420A
AEP35515A*
AEP35635A**
TUBENUT
AET4A12018B
192
159
129
104
18.4
18.4
18.4
18.4
468.2 13.6
468.2 13.6
468.2 13.6
468.2 13.6
6.17
6.17
6.17
6.17
516 15.41 288.1
3.1
1.41
AET4A12025B 387 15.41 288.1
3.1
1.41
AET4A12025B-KD 387 15.9
404.9
3.1
1.41
AET32020C
AET32025C
AET32035C
AET32050C
622 17.2
436.4
3.1
1.41
466
347
257
17.8
18.1
18.8
450.9
460.5
478.0
4.0
4.5
5.6
1.81
2.04
2.54
* Torque Range: 128 - 515 Nm
** Torque Range: 159 - 635 Nm
TORQUE, Nm
5 10 15 20 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450
HIGH TORQUE SERIES
MODEL
( )4(A)(B)66200B
( )4(A)(B)66425B
( )4(A)(B)66625B
( )4(A)(B)66925B
( )4(A)(B)771200B
( )4(A)(B)773000B
( )4(A)(B)884200B1
( )4(A)(B)884200B
( )4(A)(B)885000B
( )4(A)(B)896500B
( )4(A)(B)898100B
( )4(A)(B)8X12000B
RPM**
12
9
7
5
3.5
65
25
12
315
165
106
72
IN
15.4
15.4
16.9
16.9
22
12.2
13.6
15.4
12
12
12
12
LENGTH
MM
391
391
429
429
564
305
305
305
305
310
345
391
LB
26
26
36
36
52.5
16
18
26
12
12
12
12
WEIGHT
KG
11.8
11.8
16.4
16.4
24.0
5.3
5.3
5.5
5.5
7.3
8.2
11.8
TORQUE, Nm
50 100 200 300 400 500 600 850 1100 1200 1300 1500 2000 2500 3000 4000 5000 6500 8100 12000
Recommended Torque Range Max Torque
Visit our NEW website www.aimco-global.com
ACRADYNE ACCESSORIES
CABLE ASSEMBLIES
24330
Standard Tool Cable
The AcraDyne DC electric nutrunner tool system uses a single cable to carry all necessary conductors for superior ergonomics and durability.
• Flexible polyurethane cover for maximum durability, abrasion and transmission fluid resistant
27115
Lightweight Tool Cable
• Quick disconnects at both ends facilitate tool changeover and troubleshooting
• The CAN data/signal is via RJ45 for products such as the KDM, socket tray or computer
MODEL DESCRIPTION
LENGTH
M FT
TOOL CABLES
24330
25350
24320
27110
Cable G3 Tool Cable 3M
Cable G3 Tool Cable 5M
Cable G3 Tool Cable 10M
3
5
9.8
16.4
10 32.8
Cable G3 Tool Cable 3M Lightweight* 3 9.8
27115 Cable G3 Tool Cable 5M Lightweight* 5 16.4
27122
EXTENSIONS
Cable G3 Tool Cable 10M Lightweight* 10 32.8
24320 Extension cable 10M
25518 Extension cable 20M
10 32.8
20 65.6
*Lightweight cables are for use only with 1000 & 2000 Series tools.
CABLE ADAPTERS AND CONNECTORS
MODEL DESCRIPTION
ADAPTERS AND CONNECTORS
25646 G1 iEC to G3 Cable Adapter
DATA INTERFACE OPTION
MODEL DESCRIPTION
DATA INTERFACE OPTIONS
27348
I/O Wiring Connector – Simple module to facilitate connections to I/O on iEC Controllers
26934 G3 iEC to G1 Cable Adapter
28292
System Port Cable, USB 2.0 Cable, A
Male to B Male, 3M
27210 G3 Tool to G1 Cable Adapter
26364 Right Angle Cable Adapter
26594 Conversion Kit G1 iEC to G3 iEC
27370
25491
Conversion Kit G3 iEC to G1 iEC
Breakaway Cable Connector – Ensures disconnect of cable should stress in excess of 40 occur
CABLE TESTER UNIT
AcraDyne’s Cable Tester Unit helps diagnose and verify functionality of AcraDyne Tool Cables.
• Eliminate guesswork as to whether cable is damaged or is functioning within specifications
• Verifies each specific conductor within the cable for continuity
MODEL DESCRIPTION
26700 Cable Tester Unit, G3
26709
Adapter, G3 Tool to G1
Cable (Cable Tester only)
Visit our NEW website www.aimco-global.com
ACRADYNE ACCESSORIES
SOCKET TRAY
Socket trays, for use with iEC and UEC Controllers, are supplied with blank socket pucks machined to fit specific sockets for the application. AIMCO provides this machining as an additional service. When ordering, please specify the outer dimensions of the sockets you plan to use, and whether you would like a quote for the machining service.
• Simply remove the assigned socket to select the application to be run
• Quick and easy set up. Parameters assigned to socket position automatically
• Optional self-illuminating socket receptacles
• Delrin
®
blanks may be easily machined by the customer to accommodate custom socket profiling
• Nothing to break, wear out, or maintain
• Proximity sensors detect presence of socket
TOOL BAILS
• AcraDyne’s spring bails are designed for use with any of the AcraDyne 1000, 2000, or 3000
Series tools
• Spring bails snap on quickly and firmly at any place on the body of the tool for perfect balance and secure suspension
MODEL DESCRIPTION
25501 Wire Bail for 1000 Series Tools
27594
27791
Stationary Bail for 1000 Series Tools
Rotating Bail Assembly for 1000 Series Tools
26568 Cable Bail to Hang Tool Vertically for Gen III Cables
21208 Spring Bail for 2000 Series Tools
23662 Rotating Bail for 2000 Series Tools
AMPST-2-I AMPST-6-I
28475 Rotating Bail for AEN33042C and AEN33053C
23575 Rotating Bail for 3000 Series Tools
AMPST-6S-I
MODEL
AMPST-2-I
AMPST-2-U
AMPST-4-I
AMPST-4-U
AMPST-6S-I
AMPST-6S-U
AMPST-6-I
AMPST-6-U
AMPST-8-I
AMPST-8-IL
AMPST-8-U
DESCRIPTION
2-Position Socket Tray for iEC Controllers, 2 x 1, 1.25” Socket
2-Position Socket Tray for UEC Controllers, 2 x 1, 1.25” Socket
4-Position Socket Tray for iEC Controllers, 2 x 2, 1.25” Socket
4-Position Socket Tray for UEC Controllers, 2 x 2, 1.25” Socket
6-Position Socket Tray for iEC Controllers, 6 x 1, 1.25” Socket
6-Position Socket Tray for UEC Controllers, 6 x 1, 1.25” Socket
6-Position Socket Tray for iEC Controllers, 3 x 2, 1.25” Socket
6-Position Socket Tray for UEC Controllers, 3 x 2, 1.25” Socket
8-Position Socket Tray for iEC Controllers, 4 x 2, 1.25” Socket
8-Position Socket Tray for iEC Controllers, 4 x 2, 2.0” Socket
8-Position Socket Tray for UEC Controllers, 4 x 2, 1.25” Socket
Socket trays with 6 – 8 positions are available in varied configurations to suit workspace requirements (straight or double rows). Please let your AIMCO representative know of your specific requirements when inquiring.
SLIDING SPINDLES
20712
MODEL
20712
20848
28843
20848
DESCRIPTION
Sliding Spindle 2” Stroke 2000 Series Tools, 3/8” Drive
Sliding Spindle 2” Stroke 3000 Series Tools, 1/2” Drive
Spindle Assembly, 2” Stroke, 5000 Series, 3/4” Drive
VERTICAL TOOL HANGER
Designed for AcraDyne Gen 1 tools, tool hangers are a great way to keep a tool in place when not being used.
21159
Visit our NEW website www.aimco-global.com
ACRADYNE ACCESSORIES
CONTROLLER BRACKETS
MODEL DESCRIPTION
20322 Basic wall-mounting plate
20853
27816
Table stand free standing platform
Mounting bracket with internal wireways
ANGLE TOOL BODY JACKETS
Keep tools protected with
AIMCO’s tool
Body Jackets.
20322
20853
27816
MOUNTING BRACKETS
MODEL DESCRIPTION
23730
25717
Mounting Bracket for 1000 Series
Angle Tools
25843
26443
24924
28622
Mounting Bracket for 1000 Series
Push-To-Start Tools
Mounting Bracket for 1000/2000
Series Straight and
Pistol Tools
Mounting Flange for
1000/2000 Series
Straight and Pistol
Tools
Mounting Flange for
2000 Series Inline
Tools
LIGHT TOWER
Cost- and energy-efficient LED light tower is visible from any direction, angle, and distance
•
Two built-in alarms (FB
Type) with selectable sound patterns
•
Adjustable Volume (Max.
85 dB at 1 m)
•
Tower includes red, yellow, green, blue, and clear lenses
MODEL DESCRIPTION
30340
Mounting Bracket for 2000 Series
Angle Tools
25718
26570
25265
Mounting Bracket for 3000/5000
Series Angle Tools
Mounting Bracket for 3000/5000
Series Straight Tools
Angle head
Mounting Bracket
(Cradle type) for
3000/5000 Angle
Tools over 225 Nm
30351
Mounting Bracket,
Drive End for 2000
Series Inline Tools
28489 Light Tower
Bracket for Gen IV
Controller
MODEL
BJ10051
BJ10052
BJ10053
BJ10054
BJ10055
DESCRIPTION
For 1000 series angle tools
For 2015, 2025 series angle tools
For 2030, 2040, 2055 series angle tools
For 3060, 3090 series angle tools
For 3120, 3200 series angle tools
BAR CODE SCANNER
28859
Bluetooth
®
-Enabled Scanner Kit
Sturdy bar code scanners allow you to easily scan small, stacked, or poorly printed, one-dimensional bar codes. Kit includes a cradle, power supply, and
USB/Ethernet cable.
• Scratch proof, tempered glass exit window
• Single-circuit board construction eliminates common interconnection failures
• Industrial long-life charging contacts can withstand 250,000+ insertions into cradle
• Wireless scanner enables users to hold scanner at any angle
MODEL
20400
28859
DESCRIPTION
RS232 Barcode Reader Kit
RS232 Wireless Barcode Reader Kit
Visit our NEW website www.aimco-global.com
ACRADYNE CORDLESS TOOLS
UNMATCHED ACCURACY
FEATURES AND BENEFITS
• Pistol Tool Torque Range: 1.5–14 Nm
Angle Tool Torque Range: 1.5–120 Nm
Straight Tool Torque Range: 1.5–14 Nm
• Transducerized for precise delivery of torque and angle to the fastener
• Self-contained with on-board control
• Load tool programming software through USB cable interface
• Vibration alarm handle provides tactile feedback
• Programmable
– Torque
– Angle
– RPM
– Time
– Fastening direction
• 100 PSET
• Six step, multi-stage job functionality
• Multicolor LED status screen
• 150,000 results stored on-board
ABS-CTA11WQ
ABP-CTA11Q
MODEL
PISTOL
ABP-CTA11Q (WQ) (BQ) (WBQ)
ABP-CTA14Q (WQ) (BQ) (WBQ)
ANGLE
ABN-CTA10 (W) (B) (WB)
ABN-CTA12 (W) (B) (WB)
ABN-CTA20 (W) (B) (WB)
ABN-CTA30 (W) (B) (WB)
ABN-CTA55 (W) (B) (WB)
ABN-CTA90 (W) (B) (WB)
ABN-CTA120 (W) (B) (WB)
STRAIGHT
ABS-CTA11Q (WQ) (BQ) (WBQ)
ABS-CTA14Q (WQ) (BQ) (WBQ)
NM
TORQUE RANGE
FT-LB
1.5 - 11.0
3.0 - 14.0
1.5 - 10.0
2.5 - 12.0
5.0 - 20.0
8.0 - 30.0
15.0 - 55.0
25.0 - 90.0
35.0 - 120
1.5 - 11.0
3.0 - 14.0
W = WiFi option B = Barcode option Q = Quick Change
1.1 - 8.1
2.2 - 10.3
1.1 - 7.4
1.8 - 8.9
3.7 - 14.8
5.9 - 22.1
11.1 - 40.6
18.4 - 66.4
25.8 - 88.5
1.1 - 8.1
2.2 - 10.3
MAX
SPEED
RPM
570
460
570
380
300
170
90
60
50
570
460
DRIVE
TYPE
1/4“ QC
1/4“ QC
1/4” QC
1/4” QC
Visit our NEW website www.aimco-global.com
3/8” Sq.
3/8” Sq.
3/8” Sq.
3/8” Sq.
3/8” Sq.
1/2” Sq.
1/2” Sq.
ABN-CTA90
KG
WEIGHT W/O
BATTERY
LB
1.15
1.15
1.4
2.9
3.1
1.35
1.4
1.2
1.2
0.95
0.95
2.5
2.5
3.1
6.4
6.8
3.0
3.1
2.6
2.6
2.1
2.1
ACRADYNE CORDLESS TOOLS
BATTERIES
• Up to 40% lighter than Ni-MH batteries
• Deep-discharge protection prevents battery failure
BATTERY MODEL #
AB-B1825LI
AB-B1850LI
VOLTAGE
18V
18V
TYPE
Li-Ion
Li-Ion
AB-B1825LI
CAPACITY
2.5 Ah
5.0 Ah
AB-B1850LI
WEIGHT
.8 Lb/.35 kg
1.3 Lb/.6 kg
MODEL
AB-C18110
AB-C18220
BATTERY CHARGERS
• Battery defect detection
• Microprocessor-controlled charging: Charging time is dependent on the capacity of the battery
• Reverse polarity protection
• Automatic battery voltage detection
AB-C18110
DESCRIPTION
Quick-charge unit for 110V
Quick-charge unit for 220V
OUTPUT
14.4V – 18V, 3.0A
INPUT
110VAC, 50-60Hz
CHARGING TIME
Max 55 min for 2.5 Ah battery
14.4V – 18V, 3.0A
220-240VAC, 50-60Hz Max 55 min for 2.5 Ah battery
DIMENSIONS
(W/O BATTERY)
3.39” wide x 4.21” tall x 6.02” deep
86 mm wide x 107 mm tall x 153 mm deep
3.39” wide x 4.21” tall x 6.02” deep
86 mm wide x 107 mm tall x 153 mm deep
WEIGHT
1.2 Lb/.55 kg
1.2 Lb/.55 kg
TOOL DIMENSIONS
A B C D E
MODEL IN MM IN MM IN MM IN MM IN MM
PISTOL
ABP-CTA11Q (WQ) (BQ) (WBQ) 9.1
230 1
ABP-CTA14Q (WQ) (BQ) (WBQ) 9.1
230 1
ANGLE
ABN-CTA10 (W) (B) (WB)
ABN-CTA12 (W) (B) (WB)
ABN-CTA20 (W) (B) (WB)
ABN-CTA30 (W) (B) (WB)
ABN-CTA55 (W) (B) (WB)
ABN-CTA90 (W) (B) (WB)
ABN-CTA120 (W) (B) (WB)
17.8
17.8
17.8
28.1
451
451
451
715
3.7
3.7
3.7
14.4
26
26
95
95
95
365
8.6
8.6
1.3
1.3
1.3
2.8
218
218
33
33
33
71
4.5
4.5
4.5
4.5
4.5
4.5
115
115
115
115
115
115
–
–
0.8
0.8
0.8
2.1
STRAIGHT
ABS-CTA11Q (WQ) (BQ) (WBQ) 17.2
437 3.2
81 0.8
20 4.5
115 –
ABS-CTA14Q (WQ) (BQ) (WBQ) 17.2
437 3.2
81 0.8
20 4.5
115 –
21
21
21
20.6
523 6.8
173 1.7
42 4.5
115 1.1
29
22 559 8.2
209 1.7
42 4.5
115 1.1
29
25.7
653 11.9
303 1.9
49 4.5
115 1.4
35
54
–
–
–
–
Visit our NEW website www.aimco-global.com
ACRADYNE SYSTEMS
MULTIPLE NUTRUNNING SYSTEMS
AIMCO can integrate the AcraDyne tool spindle into a customized Multiple
Nutrunning system. From simple systems vertically suspended above the part, to assembly stations that integrate with your line, AIMCO can effectively accommodate your project.
LET US KNOW YOUR REQUIREMENTS AND WE WILL PROPOSE A SOLUTION TAILORED TO YOUR NEEDS.
INDUSTRY APPLICATIONS
• Harvester chain-pull assembly, 2-spindle
• Engine flywheel assembly, 3-spindle
• Wheel lug nut assembly, 4-spindle
• Axle u-bolt assembly, 4-spindle
• Gasoline generator assembly, 6-spindle
• Lawn mower motor assembly, 7-spindle
• Air-cooled small vehicle engine assembly,
10-spindle
FEATURES AND BENEFITS
• Nutrunner sequencing - Allows nutrunners to be sequenced at each phase of the tightening process, providing even distribution of torque and load to each fastener. This prevents part damage and distortion
• Snug threshold, final torque in one pass - No need for multiple torque stage sequencing. Fixtured nutrunners save time and effort
• No missed fasteners - Multiple nutrunners have a spindle dedicated to each location, ensuring quality on every rundown on every bolt
• Better residual torques - Synchronized controlled fastening allows residual torque levels to be consistent with the dynamic torque specification
• Saving in cycle time - Compared to using a single nutrunner tool with many rundowns, running all fasteners simultaneously reduces in-station cycle time
• Cost saving benefits - Saving installation cycle time frees operators to handle additional tasks and potentially reduce labor costs
• Collect data — Most common methods of collecting data for quality control and statistical analysis can be implemented from a serial data string using
RS232 to formatted data from a network database
Visit our NEW website www.aimco-global.com
UA-MC SERIES
MAGNETOSTRICTIVE TRANSDUCER SYSTEM LAYOUT
OIL-PULSE UNIT
MAGNETOSTRICTIVE
TRANSDUCER
SENSOR
SHAFT
SENSING &
EXCITING COIL
Uryu’s brushless Magnetostrictive Torque Transducer consists of an anvil and a pair of sensor coils. Without contacting the anvil, the sensor coil detects load to the Anvil (non-contact).
The grooves in the anvil are provided at a 45 degree angle in one region. When torque is applied to the anvil, tensile stress appears on the region and magnet permeability increases.
These permeability changes are detected, respectively transformed to the voltage change (proportional to applied torque), and converted to torque signals to control the tool.
UA-MC SERIES
FEATURES AND BENEFITS
• Patented Auto Relief Technology provides additional torque control during pulsing events
• External solenoid valve increases power-to-weight ratios by 20%
• Magnetostrictive Transducer provides durability with low size and weight
• All models work with any UEC Series controller and can connect to a wide range of network protocols
• With torque reaction virtually nonexistent, allowing for one-handed operation, the UA-MC provides significantly increased productivity
UA-50MC
MODEL
PISTOL TYPE
UA-40MC
UA-40DMC
UA-50MC
UA-50DMC
UA-60MC
UA-70MC
UA-80MC
UA-90MC
UA-100MC
UA-130MC
UA-150MC
STRAIGHT TYPE
UA-40SMC
UA-40SDMC
UA-50SMC
UA-50SDMC
UA-60SMC
UA-60SDMC
UA-70SMC
TORQUE RANGE
NM FT-LB
6.8 - 12.0
6.9 - 12.0
16.6 - 29.0
16.6 - 29.0
25.1 - 44.0
28.5 - 50.0
40.0 - 60.0
45.7 - 80.0
51.4 - 90.0
74.2 - 130.0
150 - 220
7.0 - 13.0
5.0 - 12.0
11.0 - 25.0
9.0 - 23.0
18.0 - 38.0
16.0 - 34.0
30.0 - 50.0
5.0 - 8.8
5.0 - 8.8
12.2 - 21.4
12.2 - 21.4
18.5 - 32.5
21.0 - 37.0
29.6 - 44.4
33.8 - 59.2
38.0 - 66.6
54.9 - 96.2
111 - 163
5.2 - 9.6
3.7 - 8.9
8.1 - 18.5
6.7 - 17.0
13.3 - 28.1
11.8 - 25.2
22.2 - 37.0
FREE SPEED
RPM
3,600
3,600
4,250
4,250
5,000
5,700
6,000
5,500
5,200
4,500
4,350
3,600
3,600
4,250
4,250
5,000
5,000
5,700
MM
175
187
195
203
170
170
170
170
215
233
251
246
246
246
246
252
252
265
LENGTH
IN
6.9
7.4
7.7
8.0
6.7
6.7
6.7
6.7
8.5
9.2
9.9
9.7
9.7
9.7
9.7
10.0
10.0
10.4
LB
2.5
2.7
3.4
3.7
2.4
2.4
2.4
2.4
4.5
6.2
8.8
2.7
2.7
2.7
2.7
2.9
2.9
3.1
WEIGHT
KG
1.1
1.2
1.6
1.7
1.1
1.1
1.1
1.1
2.1
2.8
4.0
1.2
1.2
1.2
1.2
1.3
1.3
1.4
RECOMMENDED AIR PRESSURE: 85 PSI
DRIVE SIZE
IN
AIR USAGE
CFM
Air Inlet: 1/4” N.P.T. Recommended Air Hose Size: 1/4” I.D. for UA-40MC - UA-50MC 3/8” I.D. for UA-60MC - UA-100MC 1/2” I.D. for UA-130MC - UA-150MC
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
3/8
3/8
3/8
1/2
3/8
1/4 QC
3/8
1/4
1/2
1/2
3/4
3/8
1/4
3/8
1/4
3/8
1/8
3/8
7.0
7.0
8.8
8.8
14.0
14.0
15.8
14.0
15.8
16.8
18.6
7.0
7.0
8.8
8.8
19.3
25.6
24.7
Visit our NEW website www.aimco-global.com
UA-AMC SERIES
SYSTEM LAYOUT
Note: Use a guided socket which can fit in the anvil size.
UAAMC
FRL
To Booster Tank
Solenoid Valve
Recommended
Air Motor Oil: AM-OIL
UEC-4800TP
(With Angle
Board)
Sensor Cable
Note: The air hose between the tool and the solenoid valve should be within 5m.
Angle Encoding Cable
UA-AMC SERIES
FEATURES AND BENEFITS
• The UA-AMC features angle measurement for improved process control
• No torque reaction
• Detects cross threading, double hits on the same fastener, stripped and damaged fastener threads, and incorrect fasteners in an application
• Transducer integrated resolver
• Patented Auto Relief Technology provides smooth torque delivery during pulsing events
• Triple chamber air motors for high power output in UA-400AMC,
UA-500AMC, and UA-600AMC models
• UEC-4800 controllers can easily be upgraded to angle-capable models.
Contact your AIMCO representative for details, 1-503-254-6600, or toll free 1-800-852-1368
UA-500AMC
MODEL
UA-400AMC
UA-500AMC
UA-600AMC
UA-700AMC
UA-800AMC
UA-900AMC
UA-1000AMC
UA-1300AMC
TORQUE RANGE
NM
7 - 13
11 - 25
18 - 38
30 - 50
40 - 60
40 - 80
50 - 90
85 - 130
FT-LB
5.2 - 9.6
8.1 - 18.4
13.3 - 28.0
22.1 - 36.9
29.5 - 44.3
29.5 - 59.0
36.9 - 66.4
62.7 - 95.9
FREE SPEED
RPM
3,600
4,250
5,000
5,700
6,000
5,500
5,200
4,500
MM
193.0
193.0
198.5
207.5
215.5
227.5
235.0
256.5
LENGTH
7.8
8.2
8.5
IN
7.6
7.6
9.0
9.3
10.1
3.1
3.3
3.7
LB
3.0
3.0
4.7
5.4
7.2
WEIGHT
1.4
1.5
1.7
KG
1.4
1.4
2.2
2.5
3.3
RECOMMENDED AIR PRESSURE: 85 PSI
DRIVE SIZE AIR USAGE
3/8
3/8
3/8
IN
3/8
3/8
1/2
1/2
1/2
CFM
7.0
8.8
14.0
15.8
16.8
18.6
19.3
25.6
Air Inlet: 1/4” N.P.T. Recommended Air Hose Size: 1/4” I.D. for UA-400AMC - UA-500AMC 3/8” I.D. for UA-600AMC - UA-1000AMC 1/2” I.D. for UA-1300AMC
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Visit our NEW website www.aimco-global.com
UEC-4800 CONTROLLER
STATE-O F -TH E-A RT C O NTR O LLE R F O R P U LS E TO O LS
FEATURES AND BENEFITS: UEC-4800
• Programmable from front panel or PC – no separate touchpad module or cable required
• 12,000 data point memory
• On-screen statistical readout
• Eight parameter sets available
• Increased programmable I/O options
• Built-in Ethernet connectivity
• PC Windows-based software included
• For use with pneumatic or electric transducerized tools
• Compatible with: UA-MC, UEP-MC (with driver box),
UA-SMC, UA-AMC (with optional Angle Encoder Board),
ALPHA-MC, and UXR-MC series tools
UEC-4800
FEATURES AND BENEFITS: UEC-4800TP
UEC-4800TP Controller with Touch-Screen option.
• Provides all features of the UEC-4800
• Enhanced user interface via Touch-Screen programming and information access
UEC-4800-EX Controller with network connectivity
MODEL
24V
I/O
URYU DATA,
BARCODE,
& PRINTER
UEC-4800
UEC-4800A-ANGLE
UEC-4800TP
UEC-4800TPA
UEC-4800-EX
UEC-4800-EXL
UEC-4800-EDA
UEC-4800-EPA
UEC-4800-EPAL
UEC-4800A-EXL
UEC-4800A-EDA
UEC-4800A-EDAL
UEC-4800A-EPA
UEC-4800A-EPAL
UEC-4800A-EPL
UEC-4800TP-EX
UEC-4800TP-EXL
UEC-4800TP-EDA
UEC-4800TP-EDAL
UEC-4800TP-EPA
UEC-4800TP-EPAL
UEC-4800TPA-EX
UEC-4800TPA-EXL
UEC-4800TPA-EDA
UEC-4800TPA-EDAL
UEC-4800TPA-EPA
UEC-4800TPA-EPAL
UEC-5500
X
X
X
X
X
X
X
X
X
X
X
X
*UEC-4800A-EPL includes MKS module with Profibus only.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
LIGHT TOWER
& BYPASS SWITCH
CAPABLE
X
X
X
X
X
X
X
X
X
X
X
X
ETHERNET
PROTOCOLS
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SERIAL
PROTOCOLS
& BAR CODE
ANYBUS
DEVICENET
ANYBUS
PROFIBUS
TOUCH
PANEL
DISPLAY
ANGLE
MONITORING
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X*
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Visit our NEW website www.aimco-global.com
UEC-4800A CONTROLLER
FEATURES AND BENEFITS: UEC-4800A
• Economical LCD front panel
• Easily program or upload your program from a PC
• Torque Wave data visible on your PC
• Memorizes max. 12,000 fastening data. When connected to a PC, standard deviations, Cp value, and Cpk values can be analyzed instantly from the stored data within the controller
• Graph statistical data
UEC-4800A SPECIFICATIONS
Power Supply
Power Frequency
Noise Protection
Insulation Protection
Ambient Temperature
Ambient Humidity
Power Consumption
Weight
Dimensions
Main Functions
Parameter Setup
AC100~240V ±10%
50/60 Hz
1000V 1µS (according to noise simulator)
DC500V over 10MΩ
0~50°C (non-freezing)
Under 90%RH (no dew)
Approx. 30VA
Approx. 3.6 kg
265(d) x 222(w) x 120(h)
Torque Monitoring/Control + Fastening Counter
Manual Input on Front LCD Panel
Personal Computer (with setup software)
Display
LED
Input Terminal Signal
Output Terminal Signal
UEC-4800(A)(TP)(TPA) BLOCK DIAGRAM
LAN
Hub
UEC-4800A
Torque Resolution ±2048 (12-Bit A/D)
LCD: 20 characters x 4 lines
Contents: Work No., Fastening Count, Down No., Fastening Time, Pulse No.
1-digit digital display (DPM): WORK NO.
4-digit digital display (DPM): TORQUE
COUNT Lamp: OK (Green), NOK (Red)
TORQUE Lamp: LOW (Yellow), OK (Green), HIGH (Red)
Operation Voltage/Current: DC24V/approx. 10mA
6 terminals (free format), VALVE
Contact Capacity: AC:125V, 0.3A, DC:30V, 1A
6 terminals (free format), VALVE
LAN Cable
Rear side of UEC
PC / Printer etc.
Power Cable
Receptacle
Torque Sensor Cable
TOOL
PLC
Serial Printer
Visit our NEW website www.aimco-global.com
PLC PC
UEC-4800TP / TPA CONTROLLER
FEATURES AND BENEFITS: UEC-4800TP/TPA
• Programmable from front panel or PC
• Can be used with various transducerized tools:
- Oil-Pulse Tools fitted with a Magnetostrictive Transducer: UA-MC series,
ALPHA-MC Series, UEP-MC Series (UEPD driver is required separately)
- Pneumatic Tools fitted with a Strain-Gauged Transducer UAN-M Series,
UOW-M Series, UNR-NT Series
• Highly reliable torque control and monitor
• Ethernet (TCP/IP) capable
Torque Wave
Monitor
Display
• Choose between Torque Control and Monitor. Detect various errors and control the job with the fastening counter
• Torque Wave data visible on both front touch panel and PC
• Can be used for eight different fastening applications
Torque Monitor Display
• Front panel, PC display, or buzzer indicates Input/Output (terminal blocks and tool wiring), checks, and errors
• Memorizes cumulative fastening numbers and pulse numbers from the start of operation
• Memorizes maximum 12,000 fastening data. Analyze standard deviations, Cp value, and Cpk value instantly from stored data within the controller. When connected to a PC, statistical data can be graphed
• Interlocks with production line using Input/Output terminals
UEC-4800TP/TPA SPECIFICATIONS
Power Supply
Power Frequency
Noise Protection
AC100~240V ±10%
50/60 Hz
1000V 1µS (according to noise simulator)
Insulation Protection DC500V over 10MΩ
Ambient Temperature 0~50°C (non-freezing)
Ambient Humidity Under 90%RH (no dew)
Power Consumption
Weight
Dimensions
Main Functions
Parameter Setup
Display
Approx. 30VA
Approx 3.6 kg
265(d) x 222(w) x 120(h)
Torque Monitoring/Control + Fastening Counter
Manual Input on Front Touch Panel
Personal Computer (with setup software)
Torque Resolution ±2048 (12-Bit A/D)
320 x 240 dot 25 characters X 15 lines
LED
Input Terminal Signal
Output Terminal Signal
COUNT Lamp: OK (Green), NOK (Red)
TORQUE Lamp: LOW (Yellow), OK (Green), HIGH (Red)
Operation Voltage/Current: DC24V/approx. 10mA
6 terminals (free format), VALVE
Contact Capacity: AC:125V, 0.3A, DC:30V, 1A
6 terminals (free format), VALVE
(Input Terminal Block)
Signal Allocations
COM: Common Terminal for the input terminals. (-)
IN 1~6: Input Terminals
IN COM: Common Terminal for the input terminals. (-)
OUT COM: Common Terminal for the output terminals.
The conventional UEC-4800 Series has been superceded by
UEC-4800(SD), which has the following new functions:
1) miniSD card slot on back panel
- Fastening data and wave can be saved to miniSD card
- Option to save and read setting values in miniSD card
2) Terminal on the rear side. The following terminals are added:
1 x Input terminal
1 x Output terminal
2 x Input COM terminals
2 x Output COM terminals
3) Valve Check
Valve wiring check function checks the valve connection to the terminal. If using ALPHA-MC fitted with the valve inside the tool, it checks the tool valve connection
4) Other Features
- Increased PC communication speed to 115,200 bps
- Faster data input and memory deletion
(Output Terminal Block)
Signal Allocations
COM: Common Terminal for the output terminals.
OUT 1~5: Output Terminals
VALVE: Valve Output (0V)
VALVE COM: +24V
Out 6: Output Terminal
OUT COM: Common Terminal for the output terminals
Visit our NEW website www.aimco-global.com
SYSTEM LAYOUT
UEP-MC SERIES
Uryu’s UEP-MC series includes a unique Magnetostrictive Transducer designed to precisely measure dynamic torque. Highly accurate torque value and fastening count data is displayed by the UECD controller, making it easy to monitor the application.
UEP-MC SERIES
FEATURES AND BENEFITS
• Operates on standard 110V or 220V power
• Extremely durable, brushless motor
• Programmable tool RPM for increased accuracy and adjustability to joint conditions
• Two stage trigger for separate, slower RPM for soft start applications
• Quiet operation
• I/O capability for programmable line control
• Pulse tool advantages on applications that require controlled electric tools
UEP-60MC
MODEL TYPE
UEP-50MC(-STDA)* Transducerized
UEP-50DMC-STDA* Transducerized
UEP-60MC(-STDA)* Transducerized
UEP-60DMC(-STDA)* Transducerized
UEP-70MC(-STDA)* Transducerized
UEP-80MC(-STDA)* Transducerized
UEP-100MC(-STDA)* Transducerized
TORQUE RANGE
NM FT-LB
5 - 10
5 - 10
10 - 25
10 - 25
25 - 40
30 - 60
60 - 120
3.7 - 7.4
3.7 - 7.4
7.4 - 18.5
7.4 - 18.5
18.5 - 29.6
22.2 - 44.4
44.4 - 88.8
FREE SPEED
RPM
2,000
2,000
2,000
2,000
2,000
2,000
2,000
WEIGHT
LB
5.2
6.6
9.2
4.0
4.0
4.7
4.7
* Add ”-STDA” to part numbers to include tool, driver box, and driver cable (components can be purchased individually).
LENGTH
IN
9.3
9.3
10.9
7.9
7.9
8.7
8.7
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Visit our NEW website www.aimco-global.com
DRIVE
IN
3/8 sq.
1/4 hex
3/8 sq.
1/4 hex
3/8 sq.
1/2 sq.
1/2 sq.
SOUND LEVEL dB(A)
72
75
75
70
70
70
70
REQUIRED
DRIVER BOX
UEPD-51A-UL
UEPD-51A-UL
UEPD-61A-UL
UEPD-61A-UL
UEPD-71A-UL
UEPD-71A-UL
UEPD-101A-UL
UECD-4800 CONTROLLER
UECD-4800 FOR UEP TOOLS
FEATURES AND BENEFITS
• Integrates Tool Driver and UEC-4800 Controller –
No separate box
• Windows-based PC Software included
• Programmable tool speeds
• 4 Models to suit UEP Series tools
UECD-4800 FUNCTIONS AND SPECIFICATIONS
• Motor Setting
- Motor current can be set in four steps
- Motor rotational speed can be set in
100 rpm increments
• Fastening error detection and fastener number countdown functions ensure seamless operation
• Allows setup or changeover of fastening torque and fastening number count
• Tool’s maintenance is possible by counting both total cycle numbers (how many fasteners) and/or total pulse numbers
• Input/Output check and error messages can be checked from your PC or the front panel of UECD-4800, which will notify you with a buzzer
• Can set up and monitor various control values.
Values can be set either on the front panel or on the PC
• Ethernet (TCP/IP) capable. Upload and receive setting values. Upload fastening result/waveform data through PC software
• Power Supply: UEP tool is driven by commercial electricity, providing flexible assembly line changes
Power Supply
Power Frequency
AC100~240V ±10%
50/60 Hz
Noise Protection 1000V 1µS (according to noise simulator)
Insulation Protection DC500V over 10MΩ
Ambient Temperature 0~50°C (non-freezing)
Ambient Humidity 90%RH or less (no dew)
Weight
Dimensions
Main Functions
Approx. 11.30 kg
265(d) x 222(w) x 200(h)
Torque control, Torque monitoring, Fastener number count
Parameter Setup
Manual Input on Front LCD Panel
PC (with exclusive setup software)
Display
Torque Resolution ±2048 (12-Bit A/D use)
LCD type, 20 characters x 4 lines
Contents: Work No., Bolt Count No., Tightening Time, Pulse Blow Number
1-digit digital display (DPM): Work No. displayed
4-digit digital display (DPM): Torque reading displayed
LED
Input Terminal Signal
Total Lamp (for count judgment): OK (Green), NOK (Red)
Torque Lamp (for torque judgment): LOW (Yellow), OK (Green), HIGH (Red)
Operation Voltage/Current: DC24V, approx. 10mA
6 terminals available (programmable). Note: Contact input necessary
Output Terminal Signal
Contact Capacity: DC 30V, 1A
6 terminals available (programmable), VALVE
Visit our NEW website www.aimco-global.com
UECD-4800 CONTROLLER
24V I/O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
MODEL
UECD-4800A-50
UECD-4800A-60
UECD-4800A-70
UECD-4800A-100
UECD-4800TPA-50
UECD-4800TPA-60
UECD-4800TPA-70
UECD-4800TPA-100
UECD-4800A-EX-50
UECD-4800A-EXL-50
UECD-4800A-EDA-50
UECD-4800A-EDAL-50
UECD-4800A-EPA-50
UECD-4800A-EPAL-50
UECD-4800A-EX-60
UECD-4800A-EXL-60
UECD-4800A-EDA-60
UECD-4800A-EDAL-60
UECD-4800A-EPA-60
UECD-4800A-EPAL-60
UECD-4800A-EX-70
UECD-4800A-EXL-70
UECD-4800A-EDA-70
UECD-4800A-EDAL-70
UECD-4800A-EPA-70
UECD-4800A-EPAL-70
UECD-4800A-EX-100
UECD-4800A-EXL-100
UECD-4800A-EDA-100
UECD-4800A-EDAL-100
UECD-4800A-EPA-100
UECD-4800A-EPAL-100
UECD-4800TPA-EX-50
UECD-4800TPA-EXL-50
UECD-4800TPA-EDA-50
UECD-4800TPA-EDAL-50
UECD-4800TPA-EPA-50
UECD-4800TPA-EPAL-50
UECD-4800TPA-EX-60
UECD-4800TPA-EXL-60
UECD-4800TPA-EDA-60
UECD-4800TPA-EDAL-60
UECD-4800TPA-EPA-60
UECD-4800TPA-EPAL-60
UECD-4800TPA-EX-70
UECD-4800TPA-EXL-70
UECD-4800TPA-EDA-70
UECD-4800TPA-EDAL-70
UECD-4800TPA-EPA-70
UECD-4800TPA-EPAL-70
UECD-4800TPA-EX-100
UECD-4800TPA-EXL-100
UECD-4800TPA-EDA-100
UECD-4800TPA-EDAL-100
UECD-4800TPA-EPA-100
UECD-4800TPA-EPAL-100
URYU DATA,
BARCODE &
PRINTER
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
LIGHT TOWER
& BYPASS SWITCH
CAPABLE
ETHERNET
PROTOCOLS
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
SERIAL
PROTOCOLS
& BAR CODE
ANYBUS
DEVICENET
ANYBUS
PROFIBUS
TOUCH PANEL
DISPLAY
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Visit our NEW website www.aimco-global.com
UDP-MC / ACRA-PULSE MC SERIES
UDP-MC SERIES
FEATURES AND BENEFITS
• High speed for increased productivity
• No torque reaction
• Magnetostrictive Transducer provides increased durability with reduced size and weight
• Auto relief pulse mechanism for measured application of tightening energy
• Durable 11 mm cable
• Use with UECP-4800A Controller with integrated driver box
• Automatic Ventilation System: Cooling fan is activated automatically when pulling the throttle trigger, which reduces heat and increases duty cycle
• Safety: To protect the operator, the UDP-MC tool stops operation immediately when failure is detected, including overloaded operation, short circuit, and broken wire
UDP-A60MC
UDP-A80MC
MODEL
UDP-A60MC
UDP-A80MC
TYPE
Transducerized
Transducerized
TORQUE RANGE
NM FT-LB
5 - 25
25 - 55
3.7 - 18.5
18.5 - 40.5
FREE SPEED
RPM
1,000 - 4,800
1,000 - 4,800
WEIGHT
LB
3.4
3.9
LENGTH
IN
8.4
9.5
DRIVE
IN
3/8 SQ.
3/8 SQ.
SOUND LEVEL dB(A)
74
76
REQUIRED
DRIVER BOX n/a n/a
ACRA-PULSE MC SERIES
FEATURES AND BENEFITS
• Electronically controlled built-in shut-off valve stops tool as soon as target torque is reached
• LED indicator shows Good or No Good after each tightening
UXR-1820MC
ALPHA-60SMC
MODEL
PISTOL
ALPHA-101MC
UXR-1820MC
INLINE
ALPHA-60SMC*
UXR-2400SMC
TORQUE RANGE
NM FT-LB
38 - 70
160 - 250
27.4 - 51.3
117.8 - 183.7
10 - 17 7.2 - 14.4
350 - 600 258.2 - 442.7
FREE SPEED
RPM
6,200
4,600
6,300
3,300
MM
LENGTH
IN
243
322
280
457
9.6
12.7
11.0
18.0
LB
WEIGHT
KG
4.6
12.3
2.6
27.6
2.1
5.5
1.4
12.5
DRIVE
IN
1/2 SQ.
3/4 SQ.
3/8 SQ.
1.0 SQ.
NOISE LEVEL dB(A)
Air Hose Size: 3/8” I.D.
* External Solenoid Valve (909-749-0) Required
*
Air Inlet: N.P.T. 1/4” N.P.T. 3/8” for UXR-1820MC N.P.T. 1/2” for UXR-2400SMC logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Recommended air pressure: 85 PSI
80
84
75
85
AIR USAGE
CFM
17.6
24.7
8.8
35.3
Visit our NEW website www.aimco-global.com
UECP-4800 CONTROLLER
UECP-4800 - UDP TOOLS
FEATURES AND BENEFITS
• Integrates Tool Driver and UEC-4800 Controller – No Separate Box
• Windows-based PC software included
• Programmable tool speeds
UECP-4800 FUNCTIONS AND SPECIFICATIONS
•
Motor Setting
- Motor current can be set in four steps
- Motor rotational speed can be set in 100 rpm increments
• Fastening error detection and fastener number countdown functions ensure seamless operation
• Allows setup or changeover of fastening torque and fastening number count
• Tool’s maintenance is possible by counting both total cycle numbers (how many fasteners) and/ or total pulse numbers
• Input/Output check and error messages can be checked from your PC or the front panel of
UECP-4800, which will notify you with a buzzer
• Set up and monitor various control values on the front panel or on a PC
• Ethernet (TCP/IP) capable. Upload and receive setting values. Upload fastening result/waveform data through PC software
• Power Supply: UDP tool is driven by commercial electricity, providing flexible assembly line changes
The UECP-4800 is an exclusive controller for UDP-MC Series, so it cannot be connected to other MC/EC tools.
Power Supply
Power Frequency
Noise Protection
AC100~240V ±10%
50/60 Hz
1000V 1µS (according to noise simulator)
Insulation Protection DC500V over 10MΩ
Ambient Temperature 0~50°C (non-freezing)
Ambient Humidity
Weight
90%RH or less (no dew)
Approx. 11.30 kg
Dimensions
Main Functions
Parameter Setup
265(d) x 222(w) x 200(h)
Torque control, Torque monitoring, Fastener number count
Manual Input on Front LCD Panel
PC (with exclusive setup software)
Display
LED
Input Terminal Signal
Torque Resolution ±2048 (12-Bit A/D use)
LCD type, 20 characters x 4 lines
Contents: Work No., Bolt Count No., Tightening Time, Pulse Blow Number
1-digit digital display (DPM): Work No. displayed
4-digit digital display (DPM): Torque reading displayed
Total Lamp (for count judgment): OK (Green), NOK (Red)
Torque Lamp (for torque judgment): LOW (Yellow), OK (Green), HIGH (Red)
Operation Voltage/Current: DC24V, approx. 10mA
6 terminals available (programmable). Note: Contact input necessary
Output Terminal Signal
Contact Capacity: DC 30V, 1A
6 terminals available (programmable), VALVE
MODEL
UECP-4800A
UECP-4800A-EX
UECP-4800A-EXL
UECP-4800A-EDA
UECP-4800A-EDAL
UECP-4800A-EPA
UECP-4800A-EPAL
24V I/O
X
X
X
X
X
X
X
URYU DATA,
BARCODE, &
PRINTER
X
X
X
LIGHT TOWER &
BYPASS SWITCH
CAPABLE
ETHERNET
PROTOCOLS
SERIAL PROTOCOLS
& BAR CODE
ANYBUS
DEVICENET
ANYBUS
PROFIBUS
TOUCH PANEL
DISPLAY
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Visit our NEW website www.aimco-global.com
CONTROLLED PULSE TOOL CABLES / CONTROLLER BRACKETS
EC/MCCBL-25
910-623-0
CONTROLLED PULSE TOOL CABLES
PART
NUMBER
909-921-0
910-974-0
910-975-0
910-546-0
910-547-0
910-548-0
LENGTH
DESCRIPTION FUNCTION M FT
Sensor Cable Assy. Tool Cable to Controller 5
Joint Cable Assy.
Tool Cable to Controller 5
Joint Cable Assy.
Tool Cable to Controller 10 35
Joint Cable Assy.
Tool Cable to Controller 3 10
18
18
Joint Cable Assy.
Tool Cable to Controller 5 18
Joint Cable Assy.
Tool Cable to Controller 10 35
UA-
MC
X
UA-
AMC
X
EC/MCCBL-3 Sensor Cable Assy. Tool Cable to Controller 1
EC/MCCBL-10 Sensor Cable Assy. Tool Cable to Controller 3
EC/MCCBL-25 Sensor Cable Assy. Tool Cable to Controller 7
EC/MCCBL-30 Sensor Cable Assy. Tool Cable to Controller 9
EC/MCCBL-35 Sensor Cable Assy. Tool Cable to Controller 10 35
EC/MCCBL-40 Sensor Cable Assy. Tool Cable to Controller 12 40
EC/MCCBL-45 Sensor Cable Assy. Tool Cable to Controller 13 45
EC/MCCBL-50 Sensor Cable Assy. Tool Cable to Controller 15 50
EC/MCCBL-60 Sensor Cable Assy. Tool Cable to Controller 18 60
EC/MCCBL-75 Sensor Cable Assy. Tool Cable to Controller 22 75
25
30
3
10
911-023-0
910-623-0
Encoder “Y” Cable
Enables Angle Sensor.
Splits Tool Cable to
Controller
0.3
1
0.3
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
* Requires Controller with Angle Encoder Board installed
910-975-0
911-023-0
X
X
X
TOOL SERIES
UEP-
MC
UDP-
MC
ALPHA-
MC
X
X
X
UXR-
MC
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
CONTROLLER PLATFORM
UEC-
4800
UECD-
4800
UECP-
4800
X
X
X
X
X
X
X*
X
UEC-4800TRAY
UEC-4800 CONTROLLER BRACKET KIT
UEC-4800TRAY provides a stable platform for the UEC-4800 Controller.
TOOL HOLDERS
Rubber tool holders protect tool’s torque sensor when not in use.
• Flexible mounting configurations for easy access and viewing
• Provides compact storage of light tower and accessories with controller
• Durable, Powder Coat finish
MODEL
852-644-1 KIT
852-669-1 KIT
852-645-1 KIT
USED FOR
ULT / UAT / UL 30 – 70 series
UX 450 – 500 series
UD-50 / UD-60 series
ULT / UAT / UL / UA-MC / UDBP-TA 40 – 60 series
UX / UX-T 612 – 800 series
UW-6 / UW-ST6 series
UL T/ UAT / UL / UA-MC 90 – 130 series
UDBP-TA 70 series
UX-T 700 series
UW-8 / UW-9 series
Visit our NEW website www.aimco-global.com
FIXTURED F-SERIES NUTRUNNERS
NO. OF
SPINDLES
1-Spindle
2-Spindle
5-Spindle
10-Spindle
VOLUME & WIDTH
BEFORE
CM
16,800
24,360
47,040
84,840
MM
200
290
560
1,010
FEATURES AND BENEFITS
• Reduced Cable Numbers — Integral type tube containing torque sensor cable and resolver cable
• Enhanced Memory Capacity — Designed with increased memory capacity for improved efficiency of assembly line and tightening data control
• Open Network Communication — Various communication boards are available
(M-NET, Device net, Inter-bas, CC-link)
• Automatic Setting (Automatic recommended value input) — Advance value preparation per application will help you simplify your parameter setting
• Space Saving — One-piece spindle controller/driver unit reduces space occupancy by 40% to 60%
F-SERIES NETWORK CONNECTIVITY
CM
5,512
8,056
15,688
28,408
UEC-F024H
MM
130
190
370
670
VOLUME & WIDTH WITH F-SERIES
UEC-F060H
CM
6,106
9,243
18,656
34,344
MM
144
218
440
810
CM
6,784
10,600
22,048
41,128
UEC-F120H
MM
160
250
520
970
Visit our NEW website www.aimco-global.com
1
3
2
4
5
FIXTURED F-SERIES NUTRUNNERS
Main Unit UEC-F300MII
Controls up to 31 spindle units and directs fastening.
10
Spindle units UEC-F024H
& UEC-F060H minus UEC-MKB
UEC-F024H with optional
UEC-MKB display unit
1
2
6
7
8
9
4
5
6
1
2
3
7
8
1
2
3
4
5
6
7
8
9
10
Power Socket
AC100~220V single phase
External Input/Output Connector
PLC1: input signal connector for control signal input (fixed allocation)
PLC2: output signal connector for judgement result and status output
(free allocation)
Serial Port (Data Input Connector)
RS232C DATA-IN accepts serial numbers, etc. provided by external equipment such as a barcode reader then outputs tightening data together with serial numbers
Serial Port (Data Output Connector)
RS232C PRINTER outputs tightening result data to your printer (free format)
Serial Port (Data Output Connector)
RS232C PLC outputs tightening result data to PLC (free format)
Serial Port (Data Output Connector)
RS485 outputs tightening result data to an external exclusive display unit
PC Connector
RS232C for communication with a PC
Spindle-to-Spindle Communication Connector
RS485 for internal spindle unit to spindle unit communications
Manual Switches
RESET, START, REVERSE and CAL
LED Display
POWER, M RUN, ACCEPT, REJECT and ALARM
1
2
3
4
5
6
7
8
Status Change Switch
RUN/BYPASS change switch
RUN: Operation possible status
BYPASS: Non-operation status
External Communication Device
RS485 connector
Resolver Connector
Tool and resolver connection
MON Connector (Monitor Output)
Analog torque electric pressure and angle pulse output
T/D Connector
Tools torque sensor connection
I/O Connector
External input and output control connection
MOTOR Connector
Connection with tools magnet motor
AC IN Connector
AC200V~220V 3-phase power socket
Visit our NEW website www.aimco-global.com
1
2
Manual Operation Switches
START: manual start switch
REVERSE: Manual reverse switch
CAL: Manual calibration switch
RESET: Manual reset switch
Data Display Operation Switch
MODE switch
SET switch
DATA UP switch
DATA DOWN switch
NOTE: Display unit (UEC-MKB) is an option
FIXTURED F-SERIES NUTRUNNERS
INLINE NUTRUNNERS
UNR-F100-1900NT
UNR-F050-1400NT
UNR-F015-65NT
The “F” Series Nutrunner System will satisfy multiple tightening patterns
.
• Torque tightening • Pre-load detection
• Spline press fit tightening
• Torque
• Pin hole alignment tightening
• Angle tightening
• Angle
• Idle operation check
• Plastic range monitor
Rated Strain
Output Voltage
Non-Lineality
2000X10–6
1.0 mV/V
±0.5% R.O.
Influence on Zero Point
Due to Temperature
±0.1% R.O./°C
Temperature Rating –10~+65°C
Input Output Resistance 480Ω
Maximum Input Voltage 16V
Insulation Resistance Greater than 300Ω
Overload Capacity 150%
INLINE NUTRUNNER SPECIFICATIONS
MODEL
UNR-F015-45NT
L1
EXTERNAL DIMENSIONS (MM)
L2 L3 D1 D2 P A B
TORQUE CAPACITY MOTOR
SENSOR NM TYPE
371 41 12 40.5 38 51 M6 9.5
TM-035 34.3
F015
UNR-F015-65NT 371 41 12 40.5 38 51 M6 9.5
TM-035
UNR-F015-200NT 400 41 12 40.5 38 51 M6 9.5
TM-035
UNR-F015-280NT 400 41 12 40.5 38 51 M6 9.5
TM-035
34.3
34.3
34.3
F015
F015
F015
UNR-F015-350NT 400 41 12 40.5 38 51 M6 9.5
TM-035
UNR-F050-270NT 453.5
41 12 50 38 51 M6 9.5
TM-035
UNR-F050-630NT 500.5
41 16.5
50 38 62 M8 12.7
TM-085
UNR-F050-730NT 500.5
41 16.5
50 38 62 M8 12.7
TM-085
UNR-F050-880NT 512.5
45 20 50 48 62 M8 15.88
TM-150
UNR-F050-1400NT 512.5
45 20 50 48 62 M8 15.88
TM-150
UNR-F100-1300NT 519.5
45 20 62 48 62 M8 15.88
TM-150
UNR-F100-1900NT 515.5
45 20 62 48 76 M8 15.88
TM-250
UNR-F100-2500NT 515.5
45 20 62 48 76 M8 15.88
TM-250
UNR-F100-3700NT 589 57 30 62 58 76 M10 19 TM-400
UNR-F100-5400NT 704.5
80 40 62 70 90 M10 25.4
TM-700
UNR-F100-7000NT 704.5
80 40 62 70 90 M11 25.4
TM-700
UNR-F100-10000NT 704.5
80 40 62 70 90 M11 25.4
TM-1000
34.3
34.3
83.3
83.3
147
147
147
245
245
392
686
686
980
F100
F100
F100
F100
F100
F050
F050
F100
F100
F015
F050
F050
F050
250
370
540
700
1,000
88
140
130
190
TIGHTENING
TORQUE
NM
4.5
6.5
20
28
35
27
63
73
370
260
175
120
90
540
340
730
500
FREE
SPEED WEIGHT SPINDLE FLANGE
RPM KG UNIT DESIGN
3,200
2,200
730
500
2.48
2.48
2.73
2.73
UEC-F024H
UEC-F024H
UEC-F024H
UEC-F024H
(a)
(a)
(a)
(a)
410
1,750
750
650
2.73
4.86
5.08
5.08
UEC-F024H
UEC-F060H
UEC-F060H
UEC-F060H
(a)
(a)
(a)
(a)
5.47
5.47
7.42
7.94
7.94
9.55
17.0
17.0
17.0
UEC-F060H
UEC-F060H
UEC-F120II
UEC-F120II
UEC-F120II
UEC-F120II
UEC-F120II
UEC-F120II
UEC-F120II
(b)
(b)
(b)
(b)
(b)
(a)
(a)
(a)
(b)
Visit our NEW website www.aimco-global.com
FIXTURED F-SERIES NUTRUNNERS
“F” NUTRUNNER MOTORS’ MINIMUM PITCH CIRCLE
Refer to minimum pitch circles for designing your machine.
TYPE
UNR-F015-45NT
UNR-F015-65NT
UNR-F015-200NT
UNR-F015-280NT
UNR-F015-350NT
UNR-F050-270NT
UNR-F050-630NT
UNR-F050-730NT
UNR-F050-880NT
UNR-F050-1400NT
UNR-F100-1300NT
A
43
43
43
43
43
59
59
59
59
59
66
B
52
52
52
52
52
72
72
72
72
72
75
90
90
92
90
90
90
64
64
64
DIMENSIONS (MM)
C D E
64
64
46
46
74
74
46
46
46
64
64
64
74
74
74
108
108
108
F
92
92
G
122
122
92 122
92 122
92 122
122
122
122
160
160
160
64 108 122 160
64 108 122 160
65 116 130 170
UNR-F100-1900NT
UNR-F100-2500NT
UNR-F100-3700NT
70 100 110
70 100 110
76 100 110
78 115 132 174
78 115 132 174
78 120 140 184
UNR-F100-5400NT
UNR-F100-7000NT
94
94
125
125
143
143
102
102
166
166
188
188
257
257
UNR-F100-10000NT 94 125 143 102 166 188 257
RIGHT ANGLE NUTRUNNERS
UNR-F100-550NTC
UNR-F050-95NTC
UNR-F050-130NTC
UNR-F100-250NTC
UNR-F015-55NTC
UNR-F015-25NTC
RIGHT ANGLE NUTRUNNER SPECIFICATIONS
MODEL L1 L2
EXTERNAL DIMENSIONS (MM)
H1 H2 D1 D2 P A B TYPE
STRAIGHT MOTORS
SENSOR MOTOR
UNR-F015-25NTC 507 120 49 10.6 70 28 85 M6 9.5
UNR-F015-200NT TM-035 F015
UNR-F015-55NTC 521 130 58 18 70 36 85 M6 12.7
UNR-F015-350NT TM-035
UNR-F050-95NTC 643 150 73.5
20 85 45 102 M6 15.88 UNR-F050-630NT TM-085
F015
F050
UNR-F050-130NTC 649 150 73.5
20 85 45 102 M6 15.88 UNR-F050-880NT TM-150
UNR-F100-200NTC 681.5
170 85.5
20 85 56 102 M6 15.88 UNR-F100-1300NT TM-150
UNR-F100-250NTC 677.5
170 85.5
20 100 56 120 M8 15.88 UNR-F100-1900NT TTM-150
UNR-F100-380NTC 716.5
200 109.5
25 110 74 134 M10 19 UNR-F100-2500NT TM-250
UNR-F100-550NTC 784 200 114.5
29 110 74 134 M10 25.4 UNR-F100-3700NT TM-400
F050
F100
F100
F100
F100
TIGHTENING
TORQUE
(NM)
25
55
95
130
200
250
380
550
FREE
SPEED WEIGHT SPINDLE
(RPM) (KG) UNIT
460 4.18
UEC-F024
260
480
340
460
340
235
165
4.37
8.08
8.3
11.92
12.3
UEC-F024
UEC-F060
UEC-F060
UEC-F120
UEC-F120
15.92
UEC-F120
17.43
UEC-F120
Visit our NEW website www.aimco-global.com
TORQUE MEASUREMENT: OVERVIEW
Torque measurement and the verification of torque tools and applied torque are an integral part of today’s threaded assembly process. The method used to measure torque can affect the judgments made regarding tool performance, assembly processes and overall product quality.
DYNAMIC TORQUE RESIDUAL TORQUE
Dynamic torque is the torque produced during the actual tightening process, normally measured using rotary transducers and a torque analyzer.
Advantages:
• Reduces operator influence
• Measures applied torque
• Can also include angle of rotation as error proofing parameter
Residual torque is the torque measured by producing an incremental amount of movement of the fastener after the actual tightening process, normally measured using a dial or digital torque wrench.
Advantages:
• Easy access to fastener
• Error proofing
• Can detect missed fasteners or joints with significant relaxation
HARD JOINT SOFT JOINT
Less than 30° degrees of rotation
720° degrees or more of rotation
Metal
Metal
Metal
Metal
Metal
Gasket
Metal
Metal
Gasket
Metal
AUDIT METHOD
OR
AUDIT METHOD
OR
Dynamic Torque: 15 Nm Residual Torque: 18 Nm Dynamic Torque: 15 Nm Residual Torque: 12 Nm
Values as examples only
A hard joint, one requiring a low degree of rotation during tightening, will normally show very little relaxation after tightening. Due to the high amount of remaining clamp load and friction within the joint members, additional movement of the fastener requires additional torque energy to be applied.
Therefore, Residual Torque values will be higher than
Dynamic Torque values.
Visit our NEW website www.aimco-global.com
Values as examples only
A soft joint, one requiring a high degree of rotation during tightening, will normally show significant amounts of relaxation after tightening. Relaxation leads to a loss of clamp load and friction within the joint members. Due to this relaxation, additional movement of the fastener requires relatively small amounts of additional torque energy and Residual Torque values will be lower than
Dynamic Torque values.
TORQUE MEASUREMENT: OVERVIEW
Checking torque measurement before, during, and after assembly ensures quality manufacturing. Proper torque measurement is critical in many assembly operations. AIMCO utilizes years of experience to design a process around your specific auditing requirements. From simple dial wrenches to electronic data collectors and joint analyzers for R&D, AIMCO is with you every step of the way.
BEFORE ASSEMBLY
Tool Capability
DURING ASSEMBLY
Process Capability
AFTER ASSEMBLY
Product Capability
Is the tool working correctly?
Testing and verifying tools under controlled conditions helps you identify accuracy and repeatability before using them in production.
Equipment used:
• Desktop testers with internal transducers
• Auditor analyzers with either stationary or rotary transducers
• UFT hydraulic joint simulators and rotary transducers
How does the tool work with the product being assembled?
Testing the tools during the actual process helps ensure that the process is working correctly. Variables in the parts and influences from the operator can be accounted for.
Equipment used:
• Torque Data Collectors/
Analyzers
• Auditor Rotary
Transducers
Does the finished product meet expectations?
Checking the product after assembly is the final opportunity to verify that product quality is satisfactory before user delivery
Equipment used:
• Click/Dial wrenches
• Electronic wrenches with
Auditor analyzers
• Rotary transducers and
Auditor analyzers with hand driver to move fastener
Visit our NEW website www.aimco-global.com
TORQUE MEASUREMENT: OVERVIEW
MEASURING QUALITY — PROCESS CAPABILITY
STATISTICAL ANALYSIS IS AN IMPORTANT STEP IN ANY QUALITY CONTROL PROCESS.
One of the most widely accepted statistical indicators of process quality, and therefore product quality, is Cpk, or the process capability for a centered process. This value indicates how capable a process is and whether the results of that process are properly centered near a specific target. A capable process is one that approaches, as a limit, 100% conformance to specifications.
Cpk is a statistical value that indicates how tightly grouped a series of samples is around the target value. Cpk is a function of the Upper Specification Limit (USL), the Lower Specification Limit (LSL), the mean of the samples and the standard deviation (
σ
) of the samples.
An acceptable, or capable, process will normally have a Cpk value of at least 1.33.
MEASURING QUALITY — CLAMP LOAD
THE PURPOSE OF THREADED FASTENING IS TO PRODUCE THE CORRECT AMOUNT OF CLAMP LOAD WITHIN THE JOINT.
Due to the cost and difficulty of measuring clamp load during the actual assembly process, torque is used as the control parameter during tightening. Many manufacturers use torque values as the primary indicator of threaded assembly quality. However, achieving repeatable clamp load is a better indicator of joint quality.
Studies have shown that discontinuous drive tools can produce equal or better clamp load results when compared to continuous drive tools.
Visit our NEW website www.aimco-global.com
TORQUE MEASUREMENT SYSTEMS
TORQUE MEASUREMENT SYSTEMS
DEVICES MODEL SERIES
DATA
COLLECTOR
INTEGRATED
TRANSDUCER
TORQUE
WRENCH
TORQUE
WRENCH
LOADER
EXTERNAL
TRANSDUCER
PORT
STATIONARY
TRANSDUCERS
-SMART
STATIONARY
TRANSDUCERS
-IND STD
ROTARY
TRANSDUCER
-SMART
ROTARY
TRANSDUCER
- IND STD
Testers ATC
AUET
AUET-DC
AUET/MTM
Analyzers
AUET/MTM-DC
ATDA
ATDA-DC
ATDA-8000-10-
DCA(-TA)(-TP)
Test Stands AHCTS*
AHCTS-K*
AHDTS*
AHBTS*
AIMTS*
Wrenches ADW
ADW-DC
APTW
ATW
ATWL
Moment Alpha
Torque Cart iTVC*
Transducers ARTIS
ASTIS
AISI
AISF
Rundown
Fixtures
AJKR
AJKS
ARDFA
ARDIA
ARDA (Spline Drive)
Joint
Simulator
UFT
X
X
X
X
X*
X*
X*
X*
X*
X
X
X*
X
X
X
X
X
X*
X*
X*
X*
X*
X*
X*
X*
X*
X*
X*
X
X
X
X
X*
X
X
X
X
X
X
X*
X*
X*
X*
X*
X*
X
X
X*
X*
X*
X*
X*
X*
X
X*
X*
X*
X*
X*
X*
X*
X*
X*
X*
X*
X*
X
*configured to customer specifications
Visit our NEW website www.aimco-global.com
TORQUE MEASUREMENT TESTERS
TORQUE MEASUREMENT: TESTERS
Features and Benefits
• Heavy industrial design
• All software included
• Auditor Torque Testers are designed for intuitive and functional usability. AUET/MTM models are available with our unique dual integrated torque transducer package.
ATC AUET
Auditor Torque Cube Auditor Universal
Electronic Tester
Testers are designed to audit torque wrenches and power tools, including pulse tools
Compact vertical or horizontal benchmount tester.
Bench mount or line side tester utilizing integrated transducer.
1 - 1,000 Nm
100 in-oz - 750 ft-lb
AUET/MTM
Auditor Universal Electronic
Tester - Multiple Transducer
Module
Bench mount or line side tester with dual integrated transducer and external transducer capacity.
1 - 1,000 Nm
100 in-oz - 750 ft-lb up to 5,000 ft-lb
AUET-DC
Auditor Universal
Electronic Tester - Data
Collector
Bench mount or line side tester utilizing integrated transducer. Provides data collection capability with included software to interface with PC.
1 - 1,000 Nm
100 in-oz - 750 ft-lb
AUET/MTM-DC
Auditor Universal Electronic
Tester/Multiple transducer
Module - Data Collector
Bench mount or line side tester with dual integrated transducer and external transducer capacity. Data collection capability with included software to interface with PC.
1 - 1,000 Nm
100 in-oz - 750 ft-lb up to 5,000 ft-lb
Integrated Transducer Range
(values are in full scale)
External Transducer Capacity
(Transducer sizes exceeding this range may be special ordered)
Vertical / Horizontal Mount
Bi-directional accuracy of +/- X of indicated reading within the top 90% of the tester’s capacity
Data Output to PC
Integrated Torque Transducer
External Transducer Port
Number of Stored Readings
Adjustable Rundown Fixture Included *
Rechargeable NiMH Battery
Measurement Modes
Peak
First Peak (Click)
Pulse
Track
Units of Measure Options
Tool Manager Software Included
1 - 1,350 Nm
100 in-oz - 1,000 ft-lb
X
1%
X
1
999
1
X
X
X
X
X
8
* Included with all testers and analyzers with a range up to 1000 in-lb.
0.50%
X
1
999
1
X
X
X
X
X
8
0.50%
999
2
X
X
2
X
X
X
X
X
8
0.50%
X
1
999
1
X
X
X
X
X
8
X
0.50%
999
2
X
X
2
X
X
X
X
X
8
X
TORQUE MEASUREMENT TESTERS USED IN CONJUNCTION WITH
External Transducers
ASTIS - Stationary
AISI / AISF - Stationary - Analog
ARTIS - Rotary
Switch box for External Transducer
AISWT-4L > 4 Way Intellect box
AISWT-6L > 6 Way Intellect box
Cables
ICBL-USB - USB Serial > PC
ATDBLIS - IS Transducer w/angle (10 Pin)
ATDBRIS - IS Transducer (4 Pin)
ICBL-10P - Intellect transducer cable
Identification chip in cable - 10 pin connector
ICBL-4P - Intellect transducer cable.
Identification chip in cable - 4 pin connector
ICBL-5000L - Connect from AUET/MTM & ATDA
to Intellect Transducers, Analog AISI / AISF
X X
X
X
X
X
X
X
X
X
X
X
X
Visit our NEW website www.aimco-global.com
X
X
X
X
X
X
X
X
X
X
X
X
AUDITOR TORQUE CUBE
ATC-10
ATC-25
ATC-100
ATC-250
ATC-500
ATC-750
ATC-1800
ATC-150F
ATC-250F
ATC-500F
ATC-750F
AUDITOR TORQUE CUBE
The Auditor Torque Cube (ATC) is a compact, versatile desktop tester that provides a multitude of capabilities.
The ATC is designed to test hand or power tools with the following:
• Peak, first peak, and track modes
• Multiple engineering units
• Manual and auto clear function
• Multiple frequency response settings
• Bi-directional use and accuracy
• Accuracy is better than 1% of indicated reading top 90% of range
• Serial data output
• Memory: 999 data samples
• Battery and/or mains powered
Because precision and quality are critical, you can depend on our testers to calibrate and certify your tools. Whether you are assembling large complicated systems or small precise time pieces, AIMCO provides the best system for your application. Our instruments have been judged “best in class” by independent
National Standards laboratories. Auditor Torque Cube is rugged enough to test and verify tools at “point of use” while still being accurate enough to calibrate hand and power tools.
Each tester is shipped with a mains/battery charger power cord, a hex to allen drive bit, and a bolting template. Models with max torque of 1,000 ft-lb or less also include a joint rundown fixture. The ATC can be positioned vertically or horizontally for the ergonomic testing of inline or pistol grip tools.
MODEL RECOMMENDED TORQUE RANGE
NM IN-LB/FT-LB KG
WEIGHT
LB MM
W X H X D
IN
SQUARE DRIVE
IN
Vertical Configuration
ATC-10
ATC-25
ATC-100
ATC-250
ATC-500
ATC-750
ATC-1800
Horizontal Configuration
ATC-150F
ATC-250F
ATC-500F
ATC-750F
0.13 - 1.13
0.28 - 2.83
1.13 - 11.3
2.83 - 28.3
5.65 - 56.5
8.47 - 84.8
21.2 - 203
20 - 200
34 - 340
68 - 678
102 - 1,017
1 - 10 in-lb
2.5 - 25 in-lb
10 - 100 in-lb
25 - 250 in-lb
50 - 500 in-lb
75 - 750 in-lb
188 - 1,800 in-lb
15 - 150 ft-lb
25 - 250 ft-lb
50 - 500 ft-lb
75 - 750 ft-lb
1.13
1.13
1.13
1.13
1.13
1.13
1.13
2.25
2.25
2.25
2.25
2.5
2.5
2.5
2.5
2.5
2.5
2.5
5
5
5
5
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
79 x 95 x 83
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
3.13 x 3.75 x 3.25
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
Visit our NEW website www.aimco-global.com
AUDITOR BENCH-MOUNT TESTERS
AUET
AUET/MTM
AUET/MTM-DC
AUDITOR UNIVERSAL ELECTRONIC TESTERS
Auditor Universal Electronic Testers (AUET) have a broad range of features to accommodate most requirements. They are designed to be bench-top mounted and are available in several configurations and various single or multiple torque ranges. Onboard memory allows you to capture 999 torque event readings. The testers are also available in file capability
(DC) models that require PC software Auditor Tool
Manager (ATM).
Instruments up to 1,000 in-lb are supplied with rundown adapters/joint kits. Rundown kits for larger instruments can be ordered separately. AUET/MTM units are supplied with an external transducer port and selector switch for connecting additional transducers.
AUET testers utilize the same transducers as the ATC instruments, providing the same high quality accuracy and durability. The common interface makes the
Auditor tester extremely user friendly.
SINGLE TRANSDUCER MODELS
MODEL* RECOMMENDED TORQUE RANGE
KGF-CM/NM
AUET-050(-DC)
AUET-0100 (-DC)
AUET-10(-DC)
AUET-50 (-DC)
0.4 - 3.6 kgf-cm
0.7 - 7.2 kgf-cm
1.1 - 11.5 kgf-cm
0.5 - 5.6 Nm
AUET-100 (-DC)
AUET-250 (-DC)
AUET-500(-DC)
1.1 - 11.3 Nm
2.8 - 28.3 Nm
5.7 - 56.5 Nm
AUET-1000(-DC) 11.3 - 113 Nm
AUET-1200 (-DC) 13.6 - 135.6 Nm
AUET-1800(-DC) 20.3 - 203.4 Nm
* Add “-DC” to part numbers for data collecting models.
IN-OZ/IN-LB
5 - 50 in-oz
10 - 100 in-oz
1 - 10 in-lb
5 - 50 in-lb
10 - 100 in-lb
25 - 250 in-lb
50 - 500 in-lb
100 - 1,000 in-lb
120 - 1,200 in-lb
180 - 1,800 in-lb
Data collecting models allow multiple files/tools/applications to be associated with torque data. Requires Tool Manager software.
Custom sizes are also available. Contact an AIMCO Customer
Service Associate for ordering options, 1-503-254-6600, or toll free 1-800-852-1368.
DUAL TRANSDUCER MODELS
MODEL** TRANSDUCER
1
AUET/MTM-050-25 0.04 - 0.4 Nm
AUET/MTM-050-600(-DC) 0.04 - 0.4 Nm
AUET/MTM-0100-050(-DC) 0.07 - 0.71 Nm
AUET/MTM-10-100 (-DC) 0.11 - 1.12 Nm
AUET/MTM-50-250 (-DC) 0.56 - 5.65 Nm
AUET/MTM-50-500 (-DC) 0.56 - 5.65 Nm
AUET/MTM-50-1000(-DC) 0.56 - 5.65 Nm
AUET/MTM-100-500 (-DC) 1.13 - 11.3 Nm
AUET/MTM-100-1000 (-DC) 1.13 - 11.3 Nm
AUET/MTM-100-1200(-DC) 1.13 - 11.3 Nm
AUET/MTM-100-1600(-DC) 1.13 - 11.3 Nm
AUET/MTM-100-2000(-DC) 1.13 - 11.3 Nm
AUET/MTM-250-1600(-DC) 2.82 - 28.2 Nm
AUET/MTM-250-1800(-DC) 2.82 - 28.2 Nm
AUET/MTM-250-2500(-DC) 2.82 - 28.2 Nm
AUET/MTM-500-2500(-DC) 5.7 - 56.5 Nm
RECOMMENDED TORQUE RANGE
TRANSDUCER
2
0.3 - 2.8 Nm
6.8 - 67.8 Nm
0.04 - 0.4 Nm
1.3 - 11.3 Nm
2.8 - 28.3 Nm
5.7 - 56.5 Nm
11.3 - 113 Nm
5.7 - 56.5 Nm
11.3 - 113 Nm
13.6 - 135.6 Nm
18.1 - 180.8 Nm
22.6 - 226 Nm
18.1 - 180.8 Nm
20.3 - 203.4 Nm
28.2 - 282.5 Nm
28.2 - 282.5 Nm
TRANSDUCER
1
5 - 50 in-oz
5 - 50 in-oz
10 - 100 in-oz
1.0 - 10 in-lb
5.0 - 50 in-lb
5.0 - 50 in-lb
5.0 - 50 in-lb
10 - 100 in-lb
10 - 100 in-lb
10 - 100 in-lb
10 - 100 in-lb
10 - 100 in-lb
25 - 250 in-lb
25 - 250 in-lb
25 - 250 in-lb
50 - 500 in-lb
TRANSDUCER
2
2.5 - 25 in-lb
60 - 600 in-lb
5 - 50 in-oz
10 - 100 in-lb
25 - 250 in-lb
50 - 500 in-lb
100 - 1,000 in-lb
50 - 500 in-lb
100 - 1,000 in-lb
120 - 1,200 in-lb
160 - 1,600 in-lb
200 - 2,000 in-lb
160 - 1,600 in-lb
180 - 1,800 in-lb
250 - 2,500 in-lb
250 - 2,500 in-lb
Custom sizes are also available. Contact an AIMCO Customer Service Associate for ordering options, 1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
AUDITOR TORQUE MEASUREMENT ANALYZERS
TORQUE MEASUREMENT: ANALYZERS
Features and Benefits
• Auditor Torque Analyzers share similar features across all products and are designed for intuitive and functional usability.
• Connects to AIMCO’s line of rotary and stationary transducers
ATDA
Auditor Torque Data Analyzer
Bi-directional
Data Output to PC
External Transducer Port
Number of stored readings
Rechargeable NiMH Battery
Digital I/O for external devices
Measurement Modes
Peak
First Peak (Click)’
Pulse
Track
Measurement Units
Software Included
Barcode Reader Capable
Portable analyzer to be connected to various transducers
X
X
X
X
8
X
X
X
X
X
1
999
Auditor Torque Data Analyzer with Data
Collection
ATDA-DC
Portable analyzer to be connected to various transducers. Provides data collection capability with included software to interface with PC
X
X
1
999
X
X
X
X
X
X
X
8
X
ATDA-8000
Auditor Torque Data Analyzer with
7” screen
7” screen with high resolution display and intuitive user interface
X
X
1
999
X
X
X
X
X
X
X
8
X
X
ATDA-8000-10-DCA(-TA)(-TP)
Auditor Torque Data Analyzer
10” display with Data Collection.
TA = Torque & Angle, TP = Torque
& Pressure
10” touch screen with high resolution display and intuitive user interface with multiplexer
X
X
X
X
X
4
999
X
8
X
X
X
X
X
USED IN CONJUNCTION WITH
Transducers
AISI / AISF - Analog
AISI / AISF - Digital
ASTIS - Stationary
ARTIS - Rotary
Wrenches
ATW
Switch boxes for External Transducers
AISWT-4L > 4 Way Intellect box
AISWT-6L > 6 Way Intellect box
Cables
ICBL-USB - USB Serial > PC
ATDBLIS - IS Transducer w/ angle
(10 Pin)
ATDBRIS - IS Transducer (4 Pin)
ICBL-10P - Intellect transducer
cable. Identification chip in cable
10 pin connector
ICBL-4P - Intellect transducer
cable. Identification chip in cable
4 pin connector
ICBL-5000L - Connect from AUET/
MTM & ATDA to Intellect Transducer,
Analog AISI / AISF
ICBL-8000DIG - Connect from
ATDA-8000 series analyzer to
Digital AISI / AIFI transducer
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Visit our NEW website www.aimco-global.com
AUDITOR TORQUE DATA ANALYZERS
ATDA-DC
AUDITOR TORQUE DATA ANALYZERS
The Auditor Torque Data Analyzer (ATDA) DC is designed to be portable or conveniently placed on a bench. The tester can be connected to various transducers, as well as transducerized wrenches and rotary or stationary transducers. The user interface is common between the ATC (Cube), AUET, AUET-DC,
AUET/MTM, AUET/MTM-DC, ATDA, and ATDA-
DC. All of these instruments have similar menus.
Additionally, all data collector testers utilize Auditor
Tool Manager for tool testing and data management.
The Auditor Torque Data Analyzer is available in two configurations:
This is a great “starter” tool management system. It provides testing, archiving, and analysis of tools at single or multiple torque targets. The tool and torque data is stored in a SQL database and can be exported to Excel or any .csv spreadsheet.
MODEL
ATDA
ATDA-DC
DESCRIPTION
Auditor Torque Data Analyzer
Auditor Torque Data Collector
• ATDA: A simple torque analyzer with sequential memory, 999 data samples, engineering limits, limited statistical processing average, range, Cp and CpK with serial output
• ATDA-DC: Contains all of the features of the
ATDA and has additional file capability. It can associate data with file names and manage data collection with a computer and Auditor Tool
Manager software
Visit our NEW website www.aimco-global.com
AUDITOR TORQUE DATA ANALYZERS
ATDA-8000-10-DCA(-TA)(-TP)
ATDA-8000
TOUCH SCREEN AUDITOR TORQUE DATA ANALYZERS
Auditor offers the ATDA-8000 and the ATDA-8000-
10-DCA(-TA)(-TP). The ATDA-8000 is a touch screen instrument with a high resolution display and user interface that facilitates “point of use” tool validation.
The user interface is intuitive and the display provides clear easy to read data. Features and parameter settings are password protected to ensure parameters cannot be inadvertently changed. After initial setup, the instrument provides semi-automatic tool validation and judgment.
The ATDA-8000 is a single channel instrument.
The ATDA-8000-10-DCA(-TA)(-TP) is a larger instrument that includes a multiplexor for connection to multiple transducers allowing a wide range of tools to be tested with one instrument. The (-TA) model is designed for torque and angle analysis and the (-TP) model is designed for torque and pressure analysis.
Both the ADTA-8000 and the ATDA-8000-10-
DCA(-TA)(-TP) systems work with AIMCO’s line of digital transducers.
MODEL
ATDA-8000
ATDA-8000-10-DCA(-TA)(-TP)
DESCRIPTION
Auditor Torque Analyzer Single channel 7” touch screen point of use validation system
Auditor Torque Analyzer Multiple transducer 10” touch screen point of use validation system
Visit our NEW website www.aimco-global.com
AUDITOR TOOL MANAGER / AUDIT MANAGER
AUDITOR TOOL MANAGER SOFTWARE
Tool Manager Software is included with the purchase of AUET-DC and AUET/MTM-DC data-collecting torque testers, as well as the ADW-DC data-collecting torque wrench. Create a database of tools and store test results with this easy-to-use software integrator to/from tester to PC.
Tool Manager
Software
AUDITOR AUDIT MANAGER SOFTWARE
Audit Manager Software is included with the purchase of ATDA-DC data collecting torque analyzers. The View
Data tab allows you to look at the collected data and the trace file. This data can be exported to Excel as a .csv file and displayed by Excel charts. The trace file displays the data in a torque/time graph and allows the user to supersede the move-on reading selected by the wrench by visually discerning via the trace where the fastener started to rotate. When selecting a single job the average, range, sigma, Cp, and CpK values are listed.
Audit Manager
Software
Visit our NEW website www.aimco-global.com
AUDITOR HIGH-CAPACITY TEST STANDS
TORQUE MEASUREMENT: HIGH CAPACITY TEST STANDS
Features and Benefits
• Advanced test stations for larger tools and higher torque output
• Configured to meet application requirements
• Durable industrial grade devices
AHCTS
Auditor High Capacity
Test Stand
AHCTS-K
Auditor High Capacity
Test Stand - Hydraulic
Designed for testing tools with continuous rotating output spindles and pulse tools.
Specifically designed for hydraulic wrenches testing.
Capacity 6,750 Nm 33,750 Nm
AHDTS
Auditor High Capacity
Test Stand Dual Transducer
Two transducers, one for rotary tools and one for hydraulic tools. Includes rundown & reaction fixtures with a single display.
33,750 Nm
AHBTS
Auditor High Capacity
Stand w/variable joint simulation
Designed for testing rotating tools without the use of rundown fixtures.
Adjustable airbrake joint simulation eliminates
CCW rotation after rundown.
6,750 Nm
AIMTS
Auditor High Capacity
Impact Test Stand
Ideal for testing impact wrenches and is recommended to utilize rundown fixtures when testing impacts.
2,700 Nm
ACCESSORIES
Rundown fixtures
AHCTS-3/4RDF
AHCTS-1RDF
AHCTS-1.5RDF
X
X
X
X
X
X
ADAPTERS
Square to Square Drive Adapters*
CA1510
CA1550
CA1575
Insert Adapters*
CA2510I
CA2515I
Square to Hex Drive Adapters*
CA2575I
1-1/2” Male to 1” Female
1-1/2” Male to 1/2” Female
-1/2” Male to 3/4” Female
2-1/2” Male to 1” Female
2-1/2” Male to 1-1/2” Female
2-1/2” Male to 3/4” Female
CA150108DHD 1-1/2” Male to 1-1/2” Male Hex
AHCTS
X
X
X
X
X
X
AHCTS-K
X
* Partial list. Contact an AIMCO Customer Service Associate for more options, 1-503-254-6600, or toll free 1-800-852-1368.
AHDTS
X
X
X
X
X
X
AHBTS
X
X
X
X
X
X
AIMTS
Visit our NEW website www.aimco-global.com
AUDITOR HIGH-CAPACITY TEST STANDS
AHCTS-5000
AHCTS TEST STAND FOR ROTATING TOOLS
Designed for testing tools with continuous rotating output spindles. The test stand includes a rundown fixture, bushing for side load support, reaction post or reaction paddles, transducer and torque analyzer display.
MODEL DESCRIPTION
AHCTS-0500
AHCTS-2500
AHCTS-5000
AHCTS-7500
¾” Square Drive w/rundown fixture
1.5” Square Drive w/rundown fixture
1.5” Square Drive w/rundown fixture
1.5” Square Drive w/rundown fixture
Please refer to Configuration Options on following page for required ordering options.
AHDTS-5025
AHCTS-001K
AHCTS-K STAND FOR HYDRAULIC TOOLS
The AHCTS-K stands are specifically designed for hydraulic wrench testing. Hydraulic wrenches have very low profiles but very high torque output, therefore, working height must be minimized to prevent side loading which could lead to errors in data or damage to tool or reaction devices.
Either stand can be ordered with options such as extension legs, casters, embedded or attached torque analyzers with various rundown fixtures and reaction devices. Contact an AIMCO Customer
Service Associate for additional information,
1-503-254-6600, or toll free 1-800-852-1368.
MODEL
AHCTS-0.5K
AHCTS-001K
AHCTS-2.5K
AHCTS-005K
AHCTS-010K
AHCTS-025K
DESCRIPTION
¾” Square Drive w/reaction device
1” Square Drive w/reaction device
1.5” Square Drive w/reaction device
1.5” Square Drive w/reaction device
1.5” Square Drive w/reaction device
2” Square Drive w/reaction device
Please refer to Configuration Options on following page for required ordering options.
Optional Pelican Case shown
(ordered separately)
CAPACITY
Ft-Lb
500
1,000
2,500
5,000
10,000
25,000
AHDTS DUAL TEST STAND FOR ROTATING AND
HYDRAULIC TOOLS
This stand has two transducers embedded into the base, one for rotary tools and one for hydraulic tools. It comes with rundown and reaction fixtures and one display.
MODEL
AHDTS-5025
DESCRIPTION
1.5” Sq Dr dual station w/rundown fixture and reaction devices
Contact an AIMCO Customer Service Associate for ordering options, 1-503-254-6600, or toll free
1-800-852-1368.
25503
Visit our NEW website www.aimco-global.com
AUDITOR HIGH-CAPACITY TEST STANDS
AHCTS Series High Capacity Test Stands for Rotary and Hydraulic Tools Configuration Options
Base Model
Number
AHCTS-xxxx
Display
1 = ATDA
2 = No Embedded
Display
3 = ATDA-DC
4 = ATDA-8000
Digital (7”)
5 = ATDA-8000-10
Digital
6 = Standard
Embedded
Display
Legs
1 = 6”
2 = No legs
(Standard)
3 = 18”
4 = Custom
Base Size
0 = 8 x 8”
1 = 12 x 12”
3 = 14 x 19”
(Standard)
4 = 18 x 24”
5 = 18 x 36”
6 = NA
Rundown Fixture
Capacity (ft-lb)
1 = 500
2 = No
3 = 1,000
4 = 2,500
5 = 5,000
6 = 7,500
7 = 1.5” Kit
Max. capacity
7,500 Ft-Lb
8 = 2.5” Kit
Max. capacity
7,500 Ft-Lb
Reaction Post
1 = Single Post
2 = No
3 = Multiple Posts 6”
4 = Paddles
5 = Custom
6 = Single Post 9”
(Standard for Hydraulic Models)
7 = Multiple Posts 9”
8 = 9” Post and
Paddles (Standard for Rotary
Models) (1, 3, 4, 5 include articulated arm)
Model Number
Digits 1–10
Model #
Digit 11
Auditor High Capacity Test Stand for Rotary Tools
AHCTS-0500
680 Nm / 500 ft-lb
AHCTS-1000
1,360 Nm / 1,000 ft-lb
AHCTS-2500
3,400 Nm / 2,500 ft-lb
AHCTS-5000
6,800 Nm / 5,000 ft-lb
AHCTS-7500
10,200 Nm / 7,500 ft-lb
Auditor High Capacity Test Stand for Hydraulic Tools
Model #
Digit 12
Model #
Digit 13
0, 1, or 3
0, 1, or 3
0, 1, or 3
0, 1, or 3
0, 1, or 3
Model #
Digit 14
Model #
Digit 15
AHCTS-0.5K
680 Nm / 500 ft-lb
AHCTS-001K
1,360 Nm / 1,000 ft-lb
AHCTS-2.5K
3,390 Nm / 2,500 ft-lb
AHCTS-005K
6,800 Nm / 5,000 ft-lb
AHCTS-010K
13,600 Nm / 10,000 ft-lb
AHCTS-025K
34,000 Nm / 25,000 ft-lb
AHCTS-050K
68,000 Nm / 50,000 ft-lb
0–5
(3–5 come with casters)
0–5
(3–5 come with casters)
0–5
(3–5 come with casters)
0–5
(3–5 come with casters)
0–5
(3–5 come with casters)
0–5
(3–5 come with casters)
0–5
(3–5 come with casters)
2
2
2
2
2
2
2
Casters
1 = Yes
2 = No
Model #
Digit 16
Articulated Arm and Mount
1 = Yes
2 = No
Digital
Module
1 = Yes
(for Tablet or PC direct)
2 = No
Model #
Digit 17
Model #
Digit 18
Visit our NEW website www.aimco-global.com
AUDITOR HIGH-CAPACITY TEST STANDS
AIMTS TEST STAND FOR IMPACT TOOLS
Obtain accurate test results with the AIMTS Series
Impact Test Stand. When used with an Auditor ATDA
Analyzer or AUET/MTM Desktop Torque Tester, the tool’s performance data can be recorded and stored.
Each Auditor Analyzer comes standard with PC-based software to store and organize data for use within a quality system. It is necessary to bolt the AIMTS to a bench. We also recommend that a rundown fixture always be used for testing impacts.
AIMTS-2000
Test stand for large impact tools
AIMTS-0500
Test stand for small impact tools
MODEL DESCRIPTION
AIMTS-0500
AIMTS-2000
¾” square drive impact test stand
1.5” square drive impact test stand
Refer to Configuration Options below for required ordering options.
AIMTS Series High Capacity Impact Test Stand Configuration Options
Base Model #
AIMTS-xxxx
Display
1 = ATDA
2 = No Embedded Display
3 = ATDA-DC
4 = ATDA-8000 Digital (7”)
5 = ATDA-8000-10 Digital
Legs
1 = 6”
2 = No legs
(Standard)
3 = 18”
4 = Custom
Base Size
6 = Bench Stand
Rundown Fixture Capacity (ft-lb)*
1 = 500
2 = No
3 = 2,000
4 = 50
5 = 5,000
6 = 10,000
7 = 20,000
8 = 250
9 = 2,500
Options
Not available for
AIMTS test stands.
Enter 222 for model # digits
15–17
Digital Module
1 = Yes
(for Tablet or
PC direct)
2 = No
Model Number
Digits 1–10
Model Number
Digit 11
Model Number
Digit 12
Model Number
Digit 13
Model Number
Digit 14
Model Number
Digits 15–17
Model Number
Digit 18
AIMTS-0050
68 Nm / 50 ft-lb
AIMTS-0250
340 Nm / 250 ft-lb
AIMTS-0500
680 Nm / 500 ft-lb
AIMTS-2000
2,720 Nm / 2,000 ft-lb
AIMTS-2500
3,390 Nm / 2,500 ft-lb
AIMTS-5000
6,780 Nm / 5,000 ft-lb
2
2
2
2
2
2
6
6
6
6
6
6
222
222
222
222
222
222
* Ordering more than one rundown fixture is highly recommended if you’re doing a lot of testing. Having multiple rundown fixtures ensures that you have spares when dealing with heat issues.
AIMTS test stands are available in capacities of up to 20,000 ft-lb. Capacities other than what is shown here are quoted separately. Contact an AIMCO Customer Service Associate at 1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
AUDITOR HIGH-CAPACITY TEST STANDS
AHBTS-2500
Auto Release test stand for quickly testing large rotating tools
AHBTS TEST STAND WITH BRAKING SYSTEM FOR ROTATING TOOLS
These test stands are for testing rotating tools without requiring the use of rundown fixtures. We utilize an airbrake for testing tools that cannot or should not be used in reverse. These test stands are compatible with any Auditor Torque Analyzer.
MODEL
AHBTS-2500
DESCRIPTION
1.5” square drive, brake system w/reaction device, rotary transducer and display
AHBTS-5000 1.5” square drive, brake system w/reaction device, rotary transducer and display
Refer to Configuration Options below for required ordering options.
AHBTS Series High Capacity Test Stand with Brake System Configuration Options
Base Model
Number
AHBTS-xxxx
Display
4 = ATDA-8000
Digital (7”)
5 = ATDA-8000-10
Digital
Legs
1 = 6”
2 = No legs
(Standard)
3 = 18”
4 = Custom
(Requires Display
Controller)
Base Size
0 = 8 x 8”
1 = 12 x 12”
3 = 14 x 19”
(Standard)
4 = 18 x 24”
5 = 18 x 36”
6 = NA
Model #
Digit 11
Model #
Digit 12
Model #
Digit 13
Rundown Fixture
Capacity (ft-lb)
2 = No
Model #
Digit 14
Reaction Post
1 = Single Post
2 = No
3 = Multiple
Posts 6”
5 = Custom
6 = Single Post 9”
7 = Multiple
Posts 9”
Model #
Digit 15
Model # Digits
1–10
AHBTS-2500
3,400 Nm / 2,500 ft-lb
AHBTS-5000
6,800 Nm / 5,000 ft-lb
2
2
Casters
1 = Yes
2 = No
Articulated Arm and Mount
1 = Yes
2 = No
Digital
Module
1 = Yes
2 = No
Model #
Digit 16
Model #
Digit 17
(For Tablet or PC
Direct)
Model #
Digit 18
Visit our NEW website www.aimco-global.com
AUDITOR TORQUE WRENCHES
TORQUE MEASUREMENT: TORQUE WRENCH
Features and Benefits
• Multiple Options from
Simple to Sophisticated
• Similar Interface with other Auditor Products
• Durable
ADW
* Auditor Digital Wrench
Torque Range
Bi-Directional accuracy of +/-
X of indicated reading within the top 90% of the tester’s capacity
Software Included
10 - 500 Nm
7 - 370 ft-lb
Digital wrench with multiple head options for line side testing/auditing
1%
X
ADW-DC
* Auditor Digital Wrench with
Data Collection
10 - 500 Nm
7 - 370 ft-lb
APTW
Auditor Preset
Torque Wrench
5 - 340 Nm
4 - 250 ft-lb
ATW
Auditor Torque Wrench
5 - 200 Nm
4 - 148 ft-lb
Data-collecting digital wrench with multiple head options for line side testing/auditing
Interchangeable heads. Preset uses proprietary adjustment tool to guard against unauthorized setting changes
Transducer on a stick.
Communicates with data collecting testers and analyzers
1%
X
3% 0.50%
MOMENT ALPHA
Digital Torque Wrench with Angle
Screwdriver: 0.5 - 5 Nm
0.4 - 3.7 ft-lb
Wrench: 4 - 1,000 Nm
3.0 - 738 ft-lb
Ensure accuracy in quality OR production applications. Wifi/
Bluetooth delivery
±4%
USED IN CONJUNCTION WITH
ATDA(DC) Data Analyzer
AUET(DC) Tester
AUET/MTM(DC) Tester
TORQUE WRENCH LOADERS
X
X
X
ATWL-250
ATWL-750
ATWL-1000
For Calibration of all types of torque wrenches eliminating human variable for more accurate measurement - digital transducer used with ATDA-8000-10-DCA
Torque range up to 340 Nm / 250 ft-lb
Torque range up to 1,020 Nm / 750 ft-lb
Torque range up to 1,360 Nm / 1,000 ft-lb
Visit our NEW website www.aimco-global.com
AUDITOR DIGITAL WRENCH SERIES
ADW-0010K111312222
ADW-1400F125312222
ADW DATA COLLECTING TORQUE WRENCH
• Large memory capacity
• Every torque value has associated trace file
• “Pick a Point” and “Move On” feature
• Barcode scanner
• Alpha Numeric screen for entering text
• Field replaceable batteries
• Docking station connection
• Serial connection
• Battery charger connection
• Ergonomic handle
• Switch between measure and data collection modes at any time
• Multiple files and route capability
• Data memory and simple statistics “On Board”
• Complete statistical analysis, data archiving and exporting in Audit Manager software
• Five models standard ranges 10 - 500 Nm full scale
• Torsion transducer — not length dependent
• Transducer is replaceable
• 1,400 Nm model uses different handle design
TORQUE RANGE WEIGHT OVERALL LENGTH SQ. DRIVE
MODEL
ADW-0010K
ADW-0075K
NM
1 - 10
7.5 - 75
FT-LB
0.7 - 7.4
5.5 - 55
LB
2.2
3.1
KG
1
1.4
IN
18
23.5
MM
457.2
596.9
IN
1/4
3/8
ADW-0180K
ADW-0270K
18 - 180
27 - 270
13 - 130
20 - 198
3.6
3.6
1.6
1.6
30.1
30.1
765.2
765.2
1/2
3/4
ADW-0500K 50 - 500 37 - 369 4 1.8
36 914 1
ADW-1400F 140 - 1,400 103 - 1,033 4.8
2.2
60 1,524 1
Each model includes a case, a battery charger, and a standard square-drive head. Other heads are available at additional cost.
Unit accuracy is ± 1.0% FSD of indicated reading for the top 95% of full scale as indicated above.
*Part numbers with K, D or F followed by a 1 designate models with file and route capability. K followed by 2 indicate sequential memory but no file capability.
Part numbers with K, D or F followed by a 1,1 indicate file and route with bar code and docking station capability. K, D or F followed by a 1,2 indicate file and route capability with serial port only.
Please refer to the Configuration Options table on following page for required ordering options.
DOCKING STATION
• Nest for accepting all wrench sizes
• Charger and serial communication accomplished through docking station
• Bench mountable
ADW-DS
Visit our NEW website www.aimco-global.com
AUDITOR DIGITAL WRENCH SERIES
ADW Series Digital Torque Wrenches Configuration Options
Base Model Number Style Data Collector
Bar Code and
Docking Station
Square Drive
Size
Type of
Transducer
Engineering
Unit
ADW-xxxx
K = Katana
D = Katana with
Dovetail
Transducer
F = Straight Stick
1 = Yes
2 = No
1 = Yes
2 = No (Serial Port
Only)
1 = 1/4”
2 = 3/8”
3 = 1/2”
4 = 3/4”
5 = 1”
6 = N/A
1 = Intellect
2 = Industrial
Standard
3 = N/A
1 = Nm
2 = Ft-lb
3 = In-lb
Model # Digits 1-8
Model #
Digit 9
Model #
Digit 10
Model #
Digit 11
Model #
Digit 12
Model #
Digit 13
Model #
Digit 14
Non Data-Collecting (Sequential Memory)
ADW-0010K2
10 Nm / 7.4 ft-lb
ADW-0075K2
75 Nm / 55 ft-lb
ADW-0180K2
180 Nm / 130 ft-lb
ADW-0270K2
270 Nm / 198 ft-lb
ADW-0500K2
500 Nm / 369 ft-lb
ADW-1000K2
1,000 Nm / 738 ft-lb
ADW-1200K2
1,200 Nm / 885 ft-lb
ADW-1000K2
1,400 Nm / 1,033 ft-lb
ADW-1200K2
2,000 Nm / 1,475 ft-lb
K or D
K or D
K or D
K or D
K or D
F
F
F
F
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1 or 2
2
3
3
4
4 or 5
5
5
5
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
1
1
1
Data Collecting (File and Route Capability)
ADW-0010K1
10 Nm / 7.4 ft-lb
ADW-0075K1
75 Nm / 55 ft-lb
ADW-0180K1
180 Nm / 130 ft-lb
ADW-0270K1
270 Nm / 198 ft-lb
ADW-0500K1
500 Nm / 369 ft-lb
ADW-1000K2
1,000 Nm / 738 ft-lb
F
1
1
1
1
1
1 or 2
2
3
3
4
4 or 5
3
3
3
3
3
3
1
1
1
1
1
1
ADW-1200K2
1,200 Nm / 885 ft-lb
ADW-1000K2
1,400 Nm / 1,033 ft-lb
ADW-1200K2
2,000 Nm / 1,475 ft-lb
F
F
F 5
5
5
3
3
3
Standard capacities shown. Additional capacities available on request. Contact an AIMCO Customer Service Associate at 1-503-254-6600, or toll free 1-800-852-1368.
1
1
1
Future Options
Not yet available.
Enter 2222 for model # digits 15–18
Model #
Digits 15–18
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
2222
Visit our NEW website www.aimco-global.com
AUDITOR ELECTRONIC TORQUE WRENCHES
ALLOW PRECISE TIGHTENING AND AUDITING OF YOUR ASSEMBLY APPLICATIONS
“TRANSDUCERS ON A STICK”
• Non-Length Dependent – Where the operator’s hand is positioned during use has no effect on torque readings
• Available in Industry Standard (IS) or
Intelligent (Intellect) Configurations –
Transducer is compatible with a wide variety of IS style instruments or Auditor
Intellect instruments that self recognize the transducer
• Durable – Steel, Aluminum and Carbon
Fiber construction provide optimal strength and weight. Transducer supplied with overload capacity of 150% of full scale
• Accurate – Torque readings are accurate to 1% of indicated reading in top 95% of full scale
MODEL
ATW-0100F
ATW-0200F
ATW-0500F
ATW-1000F
NM
14 - 136
27 - 272
68 - 680
136 - 1,360
Unit accuracy is ± 0.5% of indicated reading for the top 90% of full scale as indicated above.
Required Accessory: ATDBRIS IS cable to connect Auditor ATDA instrument.
TORQUE RANGE
FT-LB
10 - 100
20 - 200
50 - 500
100 - 1,000
SQUARE DRIVE
IN
3/8
1/2
3/4
1
Visit our NEW website www.aimco-global.com
AUDITOR PRESET TORQUE WRENCHES
FEATURES AND BENEFITS
• Easy-to-use preset wrenches for fastener torque auditing
• Torque ranges from 5 – 340 Nm
• User friendly, sleek, ergonomic design
• Tactile feedback on achievement of preset torque
• Proprietary adjustment tool guards against unauthorized setting changes
• Wide range of interchangeable heads provide flexibility and convenience
• +/- 3% accuracy when used in clockwise or counterclockwise directions
PRESET WRENCHES
APTW-25
APTW-50
APTW-100
APTW-150
APTW-200
APTW-340
DESCRIPTION
Auditor Preset Torque Wrench, 5 - 25 Nm, Accepts 12 mm Inserts
Auditor Preset Torque Wrench, 10 - 50 Nm, Accepts 12 mm Inserts
Auditor Preset Torque Wrench, 20 - 100 Nm, Accepts 12 mm Inserts
Auditor Preset Torque Wrench, 30 - 150 Nm, Accepts 12 mm Inserts
Auditor Preset Torque Wrench, 40 - 200 Nm, Accepts 14 mm Inserts
Auditor Preset Torque Wrench, 60 - 340 Nm, Accepts 14 mm Inserts
RATCHET AND
SQUARE DRIVE
HEADS
9 x 12
APTH-12RT25
APTH-12RT38
APTH-12RT50
APTH-12SD25
APTH-12SD38
APTH-12SD50
14 x 18
APTH-14RT50
APTH-14RT34
APTH-14SD50
DESCRIPTION
Auditor Preset Torque Wrench Ratchet Insert, 1/4 SQ DR, 12 mm
Auditor Preset Torque Wrench Ratchet Insert, 3/8 SQ DR, 12 mm
Auditor Preset Torque Wrench Ratchet Insert, 1/2 SQ DR, 12 mm
Auditor Preset Torque Wrench SQ DR Insert, 1/4 SQ DR, 12 mm
Auditor Preset Torque Wrench SD DR Insert, 3/8 SQ DR, 12 mm
Auditor Preset Torque Wrench SQ DR Insert, 1/2 SQ DR, 12 mm
Auditor Preset Torque Wrench Ratchet Insert, 1/2 SQ DR, 14 mm
Auditor Preset Torque Wrench Ratchet Insert, 3/4 SQ DR, 14 mm
Auditor Preset Torque Wrench SQ DR Insert, 1/2 SQ DR, 14 mm
OPEN END HEADS DESCRIPTION
9 x 12
APTH-12OE7
APTH-12OE8
APTH-12OE9
APTH-12OE10
APTH-12OE11
APTH-12OE12
APTH-12OE13
APTH-12OE14
APTH-12OE15
APTH-12OE16
APTH-12OE17
APTH-12OE18
APTH-12OE19
APTH-12OE20
14 x 18
APTH-14OE1
APTH-14OE13
APTH-14OE14
APTH-14OE15
APTH-14OE16
APTH-14OE17
APTH-14OE18
APTH-14OE19
APTH-14OE21
APTH-14OE22
APTH-14OE24
APTH-14OE25
APTH-14OE27
APTH-14OE30
APTH-14OE32
APTH-14OE34
APTH-14OE36
APTH-14OE38
APTH-14OE41
APTH-14OE118
APTH-14OE138
Auditor Preset Torque Wrench Insert 7 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 8 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 9 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 10 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 11 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 12 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 13 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 14 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 15 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 16 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 17 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 18 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 19 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 20 mm OE, 12 mm
Auditor Preset Torque Wrench Insert 1” OE, 14 mm
Auditor Preset Torque Wrench Insert 13 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 14 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 15 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 16 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 17 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 18 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 19 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 21 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 22 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 24 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 25 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 27 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 30 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 32 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 34 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 36 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 38 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 41 mm OE, 14 mm
Auditor Preset Torque Wrench Insert 1-1/8” OE, 14 mm
Auditor Preset Torque Wrench Insert 1-3/8” OE, 14 mm
Visit our NEW website www.aimco-global.com
MOMENT ALPHA DIGITAL TORQUE WRENCH
ENSURE ACCURACY IN QUALITY OR PRODUCTION APPLICATIONS
FEATURES
• Torque and angle measurement
• Modular system with self-identifying accessories
• Wireless delivery WiFi/Bluetooth
• One wrench/tablet analyzer to perform audits in full torque range from 0.5 – 1,000 Nm (with optional accessories)
– Screwdriver mode from
0.5 – 5 Nm
– Flexion mode (wrench) from
4 – 1,000 Nm
• Works in both clockwise and counter-clockwise operation
• Uses standard drive adapters (see
• Tactile feedback to operator
• Rechargeable battery pack (wrench handle)
Power Indicator Light
Kit: CPSKS00
Ergonomic Handle
On/Off Button
CPSKV00
Handle Design Prevents Tool from Rolling on Surfaces
Easy-Grip
Base for
Screwdriver
Mode
Easy-Clip, Dust-proof, and Moisture-Resistant
Battery Compartment
KIT MODEL* PARTS INCLUDED
Production
CPSKS00 Includes (1) Wrench, (1) Wrench Battery, (1) Battery Charger, (1) 40 Nm Adapter, (1) Production Controller, Production Premium Software, (1) 200 Nm Extension,
(1) 600 Nm Extension. and (1) 14 x 18 Ratchet Head (see p. 75)
Includes (1) Wrench, (1) Wrench Battery, (1) Battery Charger, (1) 40 Nm adapter, (1) Production Controller, and Production Premium Software CPSMH00
Quality
CPSKU00
CPSMJ00
Includes (1) Wrench, (1) Wrench Battery, (1) Battery Charger, (1) 40 Nm Adapter, (1) Quality Controller, Quality Premium Software, (1) 200 Nm Extension,
(1) 600 Nm Extension, and (1) 14 x 18 Ratchet Head (see p. 75)
Includes (1) Wrench, (1) Wrench Battery, (1) Battery Charger, (1) 40 Nm Adapter, (1) Quality Controller, Quality Premium Software
* Additional kits available. Contact an AIMCO Customer Service Associate, 1-503-254-6600, or toll free 1-800-852-1368.
WRENCH
HANDLE TORQUE RANGE LENGTH
CPSKV00 Screwdriver Mode: 0.5 - 5 Nm
Wrench Mode: 4 - 40 Nm (requires CPSJP81 adapter)
4 - 1,000 Nm (with appropriate extension*)
7.9”
200 mm
WEIGHT
0.82 lb
0.37 kg
TORQUE
TRANSDUCER
ACCURACY
TIGHTENING
ACCURACY
ANGLE
TRANSDUCER
ACCURACY
ISO 6789 < 1% < ±4% ±1%
Visit our NEW website www.aimco-global.com
MOMENT ALPHA DIGITAL TORQUE WRENCH
REMOTE DISPLAY
CPSKR82
FEATURES
• Pre-set tightening settings
• Audible alarm
• Four tightening modes: Torque, Angle, Torque and Angle, Angle and Torque
• 2.4” color display touchscreen
• International units: Nm, kg/m, kp/m, ft-lb, in-lb, ft-oz, in-oz
• Sturdy and suited to industrial environments
MODEL DESCRIPTION
CPSKR81 Production Controller w/out software
CPSKR82 Quality Controller w/out software
CPSKS50 Production Premium Software
CPSKU50 Quality Premium Software
SIZE
7.1” x 13.8” x 5.9”
180 x 350 x 150 mm
8.7” x 5.4” x 1.3”
221 x 138 x 32 mm
—
—
WEIGHT
7.05 lb
3.2 kg
1.05 lb
0.5 kg
—
—
ACCESSORIES
CPSKS82
CPSJP75
Battery Unit
CPSJP73
Battery
Charger
600 Nm Extension
CPSKS81
CPSJP81
40 Nm Adapter
200 Nm Extension
MODEL
CPSJP75
DESCRIPTION
Battery Unit
(includes 3 rechargeable
AA batteries)
CPSJP73 Battery Charger
CPSJP81 Adapter 40 Nm
CPSKS86 Extension 100 Nm
SIZE
—
—
3.5” / 89 mm
5.71” / 145 mm
CPSKS81
CPSKS85
CPSKS87
CPSKS82
CPSKS88
Extension 200 Nm
Extension 300 Nm
Extension 400 Nm
Extension 600 Nm
Extension 1,000 Nm
* End Effectors sold separately. See page 75.
14.41” / 366 mm
27.06” / 688 mm
30.27” / 769 mm
42.72” / 1,085 mm
70.86” / 1,800 mm
END
EFFECTOR
CONNECTION WEIGHT
— —
—
—
14 x 18*
14 x 18*
14 x 18*
14 x 18*
14 x 18*
1 in.*
—
0.03 lb
0.01 kg
0.06 lb
0.03 kg
1.1 lb
0.5 kg
2.6 lb
1.2 kg
3.08 lb
1.4 kg
5.07 lb
2.3 kg
5.07 lb
2.3 kg
Visit our NEW website www.aimco-global.com
TORQUE CARTS
TORQUE MEASUREMENT: TORQUE CARTS
Features and Benefits
• Test on repeatable joint simulators or production joints
• Simple to sophisticated options
• Manual or self-propelled
• Mobile test carts can be configured for testing continuous and discontinuous drive tools that include DC electric, clutch, battery, impulse, and torque wrenches
• Each cart is customizable to meet testing needs from 1 - 1,356 Nm
Contact your AIMCO representative for a quote or more information
Hydraulic Braking Technology
• Dry braking with multiple hydraulic cylinders where thrust is generated equally to allow better linear control of the braking ramp
• Programmable joint characteristics for use with continuous drive tools - no unwinding required after testing
UFT Repeatable Joint Simulator
• Mechanically adjustable hydraulic pressure circuits allow the bolt tightening body to be configured to simulate various joint characteristics
• Ideal for repeatable, linear joint rate simulation while testing all tools including impulse tools
DataPro Software
Torque Wrench Loader Option
* Optional equipment - extension added to cart iTVC
X
X
X
AUDITOR TORQUE CART
iTVC Torque Cart
AIMCO offers torque carts for “lineside” or “point of use“ tool validation and calibration. Our torque carts allow testing of tools on repeatable joint simulators and “in process” use on production joints, allowing users to identify process capability. There are multiple torque cart options:
• Manual push carts equipped with simple torque testers
• Manual push carts equipped with data collectors and database application software
• Self propelled cart with computer and relational database application
• Driven cart with computer and relational database application
Each cart can be equipped to specific customer requirements. Maximum torque range on board torque cart is 1,356 Nm or 1,000 ft-lb. Ancillary test stands up to 50,000 ft-lb available.
Visit our NEW website www.aimco-global.com
DATA COLLECTION SOFTWARE
DATAPRO SOFTWARE + SQNET SOFTWARE - TORQUE CART DATA MANAGEMENT
As the data management system for the AIMCO Torque
Cart line, DataPro and SQnet software provide tool management, verification, and calibration. Users can manage complete tool inventory, create jobs/routes, and store collected data. Calibration sequencing can be scheduled by time or number of rundowns.
TRACES
The axis of the trace can be torque/time, torque/angle, angle/time. Save a trace, retrieve it, and overlay a new trace for comparison. Trace details are displayed at the bottom of the graph: max. values, plot time (ms), number of data points, filter frequency, and sample rate.
Torque Values from a Click Wrench
SQNET - QUALITY CONTROL & PRODUCTION LINE
SQnet is designed to manage quality control of the production line, manage all the tools (supplier, models, technical specifications), and manage related qualitycontrol tests (Cm, Cmk, and XR charts).
TORQUE VERIFICATION
DataPro displays sample values of torque, angle, and pulse count. It calculates statistics: average, Cp,
Cpk, Six Sigma, and Mean variation. As values are measured, they are graphically plotted on a X-bar range chart scaled to specification limits.
Quality: manage tools, operation locations, and quality-control of production lines.
Production: check residual torque or perform joint analysis in order to test bench settings and to set accurate tightening parameters.
DATABASE INFORMATION
View operation lists and associated tools along with historic test or quality data.
From the historic data screen, launch statistical graphs to view and analyze archived data. Graphs include X-bar range, histogram, Six Sigma, Cp, and Cpk graphs.
Visit our NEW website www.aimco-global.com
TRANSDUCERS
TORQUE MEASUREMENT: TRANSDUCERS
Features and Benefits
Superior:
• Accuracy
• Compatibility
• Durability
Auditor offers multiple styles of transducers in various configurations. Industry standard transducers (2mv/v) and intellect transducers for Auditor instruments that reduce configuration set up time.
Rotary Stationary
ARTIS ASTIS AISI - AISF*
Auditor Rotary Transducer Industry Standard Auditor Stationary Transducer Industry Standard Auditor Industry Standard Stationary
Used in Conjunction with Analyzer
ATC
AUET
AUET/MTM
ATDA
ATDA-8000
X
X
X
X
X
X
X
X
X
* See Configuration Options on following page to configure complete part number for AISI / AISF models. Please contact an AIMCO Customer Service Associate for additional information, 1-503-254-6600, or toll free 1-800-852-1368.
AUDITOR ROTARY TRANSDUCERS
Suitable for use with all continuous drive tools, impulse tools and torque wrenches.
ARTIS Series
MODEL
ARTIS-25H-2T(A)
ARTIS-25H-5T(A)
ARTIS-25H-10T(A)
ARTIS-25H-20T(A)
ARTIS-25S-10T(A)
ARTIS-25S-20T(A)
ARTIS-38S-25T(A)
ARTIS-38S-75T(A)
ARTIS-50S-180T(A)
ARTIS-75S-250T(A)
ARTIS-75S-500T(A)
ARTIS-100S-750T(A)
ARTIS-100S-1400T(A)
DRIVE
IN
3/8 Sq.
1/2 Sq.
3/4 Sq.
3/4 Sq.
1 Sq.
1 Sq.
1/4 Hex
1/4 Hex
1/4 Hex
1/4 Hex
1/4 Sq.
1/4 Sq.
3/8 Sq.
*Add “A” to the end of the part number to indicate torque/angle transducer.
NM
MAX TORQUE
IN-LB/FT-LB
75
180
250
500
750
1400
20
10
20
25
2
5
10
18 in-lb
44 in-lb
88 in-lb
180 in-lb
88 in-lb
180 in-lb
225 in-lb
50 ft-lb
130 ft-lb
180 ft-lb
370 ft-lb
553 ft-lb
1,025 ft-lb
WEIGHT
LB
1.2
1.5
2.2
2.2
4.0
4.0
1.0
1.0
1.0
1.2
1.0
1.0
1.0
Visit our NEW website www.aimco-global.com
TRANSDUCERS
AUDITOR STATIONARY TRANSDUCERS
Stationary Transducers with joint rundown fixtures and, where applicable, bench stands.
ASTIS
AISI
ASTIS industry standard transducers can be used with multiple analyzers.
MODEL
ASTIS-25D-11
ASTIS-25D-28
ASTIS-38D-135
ASTIS-50D-270
ASTIS-75D-1000
ASTIS-100D-1700
ASTIS-100S-3000
NM
11
28
135
270
1017
1,695 Nm
4,100 Nm
MAX TORQUE
IN-LB/FT-LB
100 in-lb
250 in-lb
100 ft-lb
200 ft-lb
750 ft-lb
750 ft-lb
3,000 ft-lb
DRIVE
IN
3/4
1
1
1/4
1/4
3/8
1/2
AISI / AISF
Transducers connect to the
ATDA-8000 analyzer and mount directly to a benchtop.
MODEL*
AISI-200025
AISI-200100
AISI-200500
AISF-200100
AISF-200250
AISF-201000
MAX TORQUE
NM
2.8
11.3
56.5
135.6
339
1,350
WEIGHT
IN-LB/FT-LB KG LB
25
100
500
1.13
2.5
1.13
2.5
1.13
2.5
1,200/100
3,000/250
2.25
2.25
12,000/1,000 2.8
5
5
6
MM
W X H X D
IN
DRIVE
IN
79 x 95 x 83 3.13 x 3.75 x 3.25
1/4
79 x 95 x 83 3.13 x 3.75 x 3.25
1/4
79 x 95 x 83 3.13 x 3.75 x 3.25
3/8
100 x 65
100 x 65
100 x 65
4 x 3
4 x 3
4 x 3
1/2
1/2
1
* See Configuration Options below to configure complete part number for AISI / AISF models.
Auditor AISI / AISF Industry Standard Transducers Configuration Options
Base Model # Angle
1 = Yes
2 = No
Capacity
00025 = 25 in-Lb / 25 Ft-Lb
00050 = 50 In-Lb / 50 Ft-Lb
00100 = 100 In-Lb / 100 Ft-Lb
00250 = 250 In-Lb / 250 Ft-Lb
00350 = 350 In-Lb / 350 Ft-Lb
00500 = 500 In-Lb / 500 Ft-Lb
00600 = 600 In-Lb / 600 Ft-Lb
00750 = 750 In-Lb / 750 Ft-Lb
01000 - 1,000 In-Lb / 1,000 Ft-Lb
Configuration
1 = Bench
Stand
2 = Inline
3 = Loader
(1000
Series
Only)
Expanded
Range*
1 = Yes
2 = No
Digital
1 = Yes
2 = No
Drive Size
1 = 1/4” Hex
(up to 100 In-Lb / 8.3 Ft-Lb)
2 = 1/4” Sq.
(up to 100 In-Lb / 8.3 Ft-Lb)
3 = 3/8” Sq.
(150–500 In-Lb / 12.5–41.7 Ft-Lb)
4 = 1/2” Sq.
(1,800–3,000 In-Lb / 150–250 Ft-Lb)
5 = 3/4” Sq.
(3,000–12,000 In-Lb / 250–1,000 Ft-Lb)
6 = 1” Sq.
(12,000–24,000 In-Lb / 1,000–2,000 Ft-Lb)
7 = 1-1/2” Sq.
(24,000+ In-Lb / 2,000+ Ft-Lb)
Model #
Digits 1–5
Model #
Digit 6 Model # Digits 7–11
Model #
Digit 12
Model #
Digit 13
Model #
Digit 14 Model # Digit 15
Stationary
AISI-
(in-lb capacities)
AISF-
(ft-lb capacities)
2
2
*Standard range is 10%–100% of maximum capacity. Expanded range is 5%–100% of maximum capacity.
Transducers are available in capacities of up to 10,000 Ft-Lb. Contact an AIMCO Customer Service Associate at 1-503-254-6600, or toll free 1-800-852-1368.
Wireless
1 = Yes
2 = No
Model #
Digit 16
2
2
Visit our NEW website www.aimco-global.com
RUNDOWN FIXTURES
TORQUE MEASUREMENT: RUNDOWN FIXTURES
Features and Benefits
• Enables accurate and repeatable testing of pneumatic or electric power tools
• Mechanical Belleville system of bolt, nut or nut body,
Belleville washers and main housing, 1/4” – 3/4” drive sizes, 10 in-lb – 1,200 ft-lb
• Fixtures can be ordered to simulate hard, med., or soft joints
Wear-Resistant Heavy Duty
Heavy Duty, Fully Encapsulated
Heavy Duty, Encapsulated Washers
Standard (Included w/analyzer)
Spline Drive
Used in Conjunction with External Transducer
ASTIS
AISI / AISF
ARTIS
*Spline drive feature provides rundown control when testing pulse tools.
ARDFA-XXXXHD
ARDIA-XXXHD
X
X
X
X
HDE Series
HDS Series
HD Series
ARDFA-XXXHDS
ARDIA-XXXHDS
X
X
X
X
ARDFA-XXXHDE
ARDIA-XXXHDE
X
X
X
X
ARDFA-XXX
ARDIA-XXX
X
X
X
X
ARDA-XXX
X
X
X*
AUDITOR RUNDOWN FIXTURES
To test power tools, pneumatic or electric, consistent rotational speed must be achieved. The joint rundown fixture/simulator provides the means by which the tool motor and spindle rotates freely at the start of the test cycle and then develops torque as rotation resistance increases as fastener/joint load increases. The linearity and consistency of the joint rundown fixtures/simulators vary greatly and the tool test data is a product of the variations in these rundown fixtures. Higher quality joint rundown fixtures produce torque data with less scatter.
ARDIA MODELS
MODEL*
ARDIA-10(HD)(HDE)(HDS)
ARDIA-25(HD)(HDE)(HDS)
ARDIA-50(HD)(HDE)(HDS)
RECOMMENDED TORQUE RANGE
NM IN-LB
.13 - 1.13
.28 - 2.8
.56 - 5.6
1.0 - 10
2.5 - 25
5 - 50
ARDIA -100 (HD)(HDE)(HDS)
ARDIA-150(HD)(HDE)(HDS)
ARDIA-250(HD)(HDE)(HDS)
ARDIA-350(HD)(HDE)(HDS)
1.3 - 11.3
1.7 - 16.9
2.8 - 28.3
4 - 40
10 - 100
15 - 150
25 - 250
35 - 350
ARDIA -500 (HD)(HDE)(HDS)
ARDIA-750(HD)(HDE)(HDS)
5.6 - 56.5
8.5 - 84.7
50 - 500
75 - 750
3/8”
3/8”
ARDIA-1000(HD)(HDE)(HDS) 11.3 - 113 100 - 1,000
*Add “HD” to part numbers for wear resistant models. Add “HDS” to part numbers for fully encapsulated wear resistant models.
*Add “HDE” to part numbers for partial encapsulated wear resistant models.
3/8”
1/4”
1/4”
3/8”
3/8”
SQUARE
DRIVE
1/4”
1/4”
1/4”
ARDFA MODELS
MODEL*
ARDFA-100(HD)(HDE)(HDS)
ARDFA-150(HD)(HDE)(HDS)
ARDFA -250 (HD)(HDE)(HDS)
RECOMMENDED TORQUE RANGE SQUARE
NM FT-LB DRIVE
13.6 - 136
20.4 - 204
34 - 340
10 - 100
15 - 150
25 - 250
1/2”
1/2”
1/2”
ARDFA-500(HD)(HDE)(HDS)
ARDFA-600(HD)(HDE)(HDS)
67.8 - 678
81.6 - 816
50 - 500
60 - 600
3/4”
3/4”
ARDFA-750(HD)(HDE)(HDS) 101.7 - 1,017 75 - 750 3/4”
*
Add “HD” to part numbers for wear resistant models. Add “HDS” to part numbers for encapsulated wear resistant models.
* Add “HDE” to part numbers for partial encapsulated wear resistant models.
Visit our NEW website www.aimco-global.com
JOINT KITS / JOINT SIMULATORS
JOINT KITS
Joint kits are an essential accessory for accurate off-line testing of powered assembly tools.
• Represent production joint conditions off the production line
• Can be adjusted to include joint conditions specified by
ISO 5393
• Allows free running of bolt before torque gradient
• Provide linear response.
Repeatable 1/4” – 1” drive sizes, 28 – 1,695 Nm.
ROTARY KIT*
AJKR
STATIONARY KIT**
AJKS
MODEL
AJKR-28
AJKR-135
AJKR-271
AJKR-1017
AJKR-1695
MODEL
AJKS-25D
AJKS-38D
AJKS-50D
AJKS-75D
AJKS-100D
* AJKR for use with ARTIS external transducers..
**AJKS for use with ASTIS or ARTIS external transducers.
DRIVE SIZE - IN
1/4
3/8
1/2
3/4
1
DRIVE SIZE - IN
1/4
3/8
1/2
3/4
1
Kit Components
UFT SERIES HYDRAULIC MECHANICAL JOINT SIMULATORS
UFT-6
UFT-10 UFT-16
• Designed for pulse tool and continuous drive tool certification and testing, UFT Joint Simulators offer the most repeatable and linear joint rate simulation on the market
• For use with ARTIS external transducers
• Bolt tightening body and hydraulic pressure loading mechanism are connected by a hydraulic pressure circuit.
Ideal for ISO 5393 test procedures
• Quickly and easily simulate three joint rates by opening or closing two external valves
• Specially coated testing bolt produces over 100,000 cycles without variation or deformation
UFT-S10
UFT-S16
UFT-24
MODEL
UFT-6
UFT-10 / UFT-S10
UFT-16 / UFT-S16
UFT-24*
BOLT
SIZE
M8
M10
M12
M14
M5
M6
M6
M16
M18
M20
M24
* UFT-24 medium hard/soft joints only
Reaction fixture for continuous drive tools not included. Sockets included.
TORQUE RANGE
NM FT-LB
3.2 - 5.4
5.4 - 14.7
6.7 - 14.7
14.7 - 31.4
31.4 - 53.9
53.9 - 88.2
88.2 - 149
149 - 190
190 - 294
294 - 441
441 - 686
2 - 4
4 - 11
5 - 11
11 - 23
23 - 40
40 - 65
65 - 110
110 - 140
140 - 217
217 - 325
325 - 506
Visit our NEW website www.aimco-global.com
LB
WEIGHT
KG
8 3.6
43 19.5
88
108
40
49.1
TORQUE MEASUREMENT CABLES
ICBL-USB
ATDBLIS
ATDBRIS ICBL-10P
ICBL-4P ICBL-5000L
ICBL-8000DIG
TORQUE MEASUREMENT CABLES
MODEL DESCRIPTION
ICBL-USB*
ATDBLIS*
ATDBRIS*
ICBL-10P*
Connects between COM port of display to PC
Connect to IS transducer w/ angle - 10 pin
Connect to IS transducer - 4 pin
Intellect transducer cable. Identification chip in cable - 10 pin connector
ICBL-4P*
ICBL-5000L
Intellect transducer cable. Identification chip in cable - 4 pin connector
Connect from AUET/MTM & ATDA to Intellect
Transducers, Analog AISI / AISF
ICBL-8000DIG Connect from ATDA-8000 series analyzer to
AISI / AIFI transducer
* Compatible with ATDA, AUET, ADW products
SERIAL
CABLE
X
TRANSDUCER
CABLE
X
X
X
ROTARY
X
X
X
X
X
ROTARY
W/ANGLE STATIONARY IND STD INTELLECT
X
X
X
X
X
X
X
X
X
X
TESTER / ANALYZER COMPATIBILITY
MODEL ATC AUET
AUET/
MTM
AUET-
DC
ICBL-USB
ATDBLIS
ATDBRIS
ICBL-10P
ICBL-4P
ICBL-5000L
ICBL-8000DIG
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
AUET/
MTM-DC
X
X
X
X
X
X
ATDA
X
X
X
X
X
X
ATDA-
DC
X
X
X
X
X
X
ATDA-
8000
ATDA-8000-10-
DCA(-TA)(-TP)
X
X
X
X
AISWT
SWITCHBOX
X
ADW
X
ADW-
DC
X
AIMTS TEST
STAND
X
TRANSDUCER COMPATIBILITY
MODEL
ATDBLIS
ATDBRIS
ICBL-10P
ICBL-4P
ICBL-5000L
ICBL-8000DIG
ASTIS
X
STATIONARY
ANALOG AISI/AISF DIGITAL AISI/AISF
ROTARY
ARTIS
X
X
X
X
X
X
Visit our NEW website www.aimco-global.com
ACRADYNE HIGH TORQUE PNEUMATIC TOOLS
AAP1B66600A
AAP1B76950A
FEATURES AND BENEFITS
AcraDyne’s High Torque Pneumatic
Bolting Tools offer a reliable and dependable solution for the installation and removal of heavy-duty fasteners.
Appropriate for use in industries requiring high torque capability, accuracy, power, and safety.
• Modular design allows for ease of maintenance
• Interchangeable motors and gearing
• Same proven and reliable gearbox as the AcraDyne DC line
• One-hand reverse
AAP1B772000A
AAP1B885100A
MODEL
AAP1B66400A
AAP1B66600A
AAP1B66850A
AAP1B76950A
AAP1B771350A
AAP1B772000A
AAP1B772950A
AAP1B885100A
(NM)
1,350
2,000
2,950
5,100
400
600
850
950
TORQUE
(FT-LB)
1,000
1,475
2,175
3,775
300
450
625
700
SPEED
(RPM)
9
8
22
14
27
31
57
39
WEIGHT
(LB)
10.4
12.7
14.9
23
9.75
9.75
9.75
10.4
AIR PREPARATION UNITS
Many stacking filter/regulator combinations are available. See page 130
for options.
AFRL-4HTA
Standalone Unit
AFRL-4
28178
HT Air Tool/AFRL
Carrying Kit
SQUARE DR.
(IN)
1
1
1
1-1/2
3/4
3/4
3/4
3/4
AIR CONSUMPTION
(CFM)
26.3
26.3
26.3
31.5
22.9
22.9
22.9
26.3
Visit our NEW website www.aimco-global.com
ACRADYNE HIGH-SPEED SERIES HIGH TORQUE PNEUMATIC TOOLS
Our High-Torque Pneumatic High-Speed Series Bolting
Tools offer a reliable and dependable solution for the installation and removal of heavy-duty fasteners with high torque capability, accuracy, power, and safety.
FEATURES AND BENEFITS
• Extremely fast rundown speed due to the dual motor design
• High torque output to weight ratio
• No reaction force due to the reaction bar and swivel gearbox
• Full swivel gearcase facilitates reaction bar positioning for ease of use and operator comfort
• Handle exhaust with low sound level
• Low air consumption compared to large motor frame type tools
• Uses the same durable and reliable gearbox from our DC line of high toque tools
• Modular design allows for easy maintenance
• One motor is used for all models in the range
• Two-piece handle construction enables flexible handle design
• Available in reversible and non-reversible models
MODEL*
AAP2B76250A(R)
AAP2B76450A(R)
AAP2B76650A(R)
AAP2B76950A(R)
AAP2B771400A(R)
AAP2B772000A(R)
AAP2B773000A(R)
AAP2B785100A(R)
*Add “R” to part numbers for reversible models.
950
1,400
2,000
3,000
4,800
(NM)
250
450
650
TORQUE
(FT-LB)
185
330
480
700
1,000
1,475
2,210
3,540
153
110
63
52
26.5
SPEED
(RPM)
660
335
223
AAP2B76950A
AAP2B771400A
10.5
14.6
14.8
15.0
19.7
(LB)
10.5
10.5
10.5
WEIGHT
4.8
6.6
6.7
6.8
8.9
(KG)
4.8
4.8
4.8
SQUARE DR.
(IN)
3/4
3/4
3/4
3/4
1
1
1
1.5
Visit our NEW website www.aimco-global.com
ACRADYNE HT PNEUMATIC TOOL ACCESSORIES
Polyurethane Hose for HT Tools
ASH-500C-15MSZ
• Durable Polyurethane is chemical resistant and lightweight, and provides excellent recoil memory and maximum flexibility
• Available in transparent hose color (opaque also available)
• Assemblies for coiled hose include reusable swivel fitting. Straight hose available with or without fittings
• Working temperature: –104° F to 175° F
• Working pressure: 100 PSI
16"
TAIL
“RL”
(Retracted Length)
8"
TAIL
SINGLE AIR HOSE ASSEMBLIES (COILED)
MODEL
DESCRIPTION
(O.D. x I.D. x LENGTH)
RETRACTED
LENGTH
NPT
FITTINGS
I.D.
ASH-500C-15MSZ 3/4’’ x 1/2’’ x 15’
ASH-500C-25MSZ 3/4’’ x 1/2’’ x 25’
13’’
23’’
1/2’’
1/2’’
Custom length coil assemblies and special colors available in minimum order quantities. contact an AIMCO Customer Service Associate, 1-503-254-6600, or toll free 1-800-852-1368.
STRAIGHT AIR HOSE
(SOLD PER FOOT)
MODEL DESCRIPTION
ASH-500Z 1/2’’ I.D.
Contact an AIMCO Customer
Service Associate about full reel pricing, 1-503-254-6600, or toll free 1-800-852-1368.
Rubber Hose for HT Tools
28796
1/2” ID
• Designed for use in a wide range of industrial, construction, and agricultural applications
• Constructed of high grade, reinforced
EPDM synthetic rubber
• Working temperature: –40° F to 190° F
SINGLE AIR HOSE (RUBBER)
I.D.
O.D.
LENGTH
1/2” 0.81”
5/8” 0.97”
3/4” 1.12”
10 ft
10 ft
10 ft
WORKING
PRESSURE
200 psi
200 psi
200 psi
WEIGHT
2.0 lb
2.7 lb
3.4 lb’
Custom lengths available. Contact an AIMCO Customer Service
Associate for more details, 1-503-254-6600, or toll free 1-800-
852-1368.
REACTION BARS
Tool includes standard, spline attachment reaction device. See
Custom reaction devices are available; contact an AIMCO
Customer Service Associate for more details, 1-503-254-6600, or toll free 1-800-852-1368.
Reaction Bars
Air Line Fittings
28164
28163
PLUGS
MODEL
28161
28162
28163
28164
28162
28161
DESCRIPTION
1/2” x 1/4” MPT
1/2” x 3/8” MPT
1/2” x 1/2” MPT
1/2” x 1/2” FPT
27768 27769
QUICK-CHANGE COUPLERS
MODEL
27768
27769
DESCRIPTION
1/2” FPT
1/2” MPT
27771
PROTECTIVE COUPLER
MODEL
27771
DESCRIPTION
Vinyl
500-SZ
SWIVEL FITTING
MODEL
500-SZ
CAPACITY
1/2’’ NPT Swivel Fitting
Visit our NEW website www.aimco-global.com
AIMCO PULSE TOOLS: OVERVIEW
HOW DOES A PULSE TOOL WORK?
The unique design of a pulse tool, combining motor power and hydraulics, leads to an assembly tool that produces smooth, controlled torque in a series of very fast (2 – 4 ms) events and virtually no torque reaction.
• At free-speed, the entire pulse unit, a sealed cylinder containing hydraulic fluid and an output shaft, rotates at the same speed as the tool motor
• As resistance to rotation increases, the rotation of the output shaft slows, while the rotation of the cylinder and the hydraulic fluid continues until they approach a seal point within the cylinder
• This seal point produces an increase in fluid pressure and transmits the energy from the rotational mass of the cylinder and fluid to the output shaft, producing torque on the fastener
• After a series of these cycles (pulses), fluid pressure builds to a point that overcomes the limit of a relief valve, allowing pressure to drop and torque to be controlled
TIMELINE
1965
NEW TECHNOLOGY
The first pulse tool prototype was designed in an attempt to provide a tool that would provide torque control without the high maintenance costs of impact wrenches.
1980
U SERIES
Uryu produces the U-series, the first pulse tools to be available commercially for assembly. The
U-Series evolves over the next several years to cover torque ranges from 4 – 850 Newton meters and finally, the development of fullshut-off tools. The lack of torque reaction and accurate, repeatable torque makes these tools a manufacturer standard.
1988
EC SERIES
The EC Series
(and later the MC
Series) combines the advantages of pulse tools with the technology of controlled tools. By incorporating a transducer into the design of the U-Series pulse tool, customers gain the Productivity and
Ergonomics of pulse tools and the traceability and control of other transducerized assembly tools.
Manufacturers with safety critical applications now have many more options for assembly tools.
2006
UEP-MC SERIES
Uryu does what no other manufacturer can by developing the UEP series, the first and only electric powered pulse tool. The lower speeds, quiet operation, and extremely repeatable torque make the UEP the perfect choice for applications where accuracy and clean operation are critical. By combining programmable tool speed with the MC-style transducer, extremely accurate and repeatable torque is achieved on a variety of applications.
Visit our NEW website www.aimco-global.com
2012
UDP-MC CONTROLLED SERIES
Uryu introduced the UDP-MC controlled series
— smaller, lighter electric pulse tools that have an integrated fan unit. The state-of-the-art
UECD controller with a built-in driver box eliminates the need for a secondary driver box in the system configuration
.
TIMELINE
OMEGA PULSE TOOLS: OVERVIEW
BENEFITS OF AIMCO PULSE TOOLS:
Pulse tools offer advantages in all of the PERQ
®
reliability and quality.
elements – productivity, ergonomics,
By partnering with AIMCO, manufacturers can apply the advantages of pulse tools in many ways to reduce production costs and increase profits.
• Reliability – Advances in design and AIMCO’s extensive maintenance and training programs add up to years of low cost service from any AIMCO pulse tool
• Productivity – Combining high operating speeds with one-handed operation, AIMCO pulse tools help manufacturers produce at the highest possible rates
• Quality – AIMCO pulse tools offer the most repeatable torque and clamp load results of any assembly tool, guaranteeing high product quality for manufacturers
• Ergonomics – Light weight, low vibration and no torque reaction make AIMCO pulse tools the safest assembly tools available for threaded assembly
1995
ALPHA SERIES
The Alpha-series continued
Uryu’s advancements in pulse-tool design. In order to achieve the best possible power-to-weight ratio, the
Alpha 9-blade, twin chamber air motor is developed. Still unique today, this new motor provides significantly more power, thereby, reducing cycle times and improving torque repeatability. The new Alpha air motor and design changes make the tools smaller and lighter, keeping Uryu at the forefront of pulse tool technology.
2001
ULT / UL SERIES
Continuous innovations and developments include a new O-ring design that improves durability, roller bearings in the pulse unit to increase hydraulic fluid life and redesigned porting helps maintain fluid temperature and torque repeatability. UL tools, with their non-shut off operation, are ideal for applications where the lightest, fastest tool is necessary. Each model features the powerful Alpha air motor and latest in pulse unit design.
2013
UA-AMC CONTROLLED PULSE SERIES
The UA-AMC Series features angle measurement for improved process control.
It detects cross threading, double hits on the same fastener, stripped and damaged fastener threads and incorrect fasteners. It also features patented Auto Relief
Technology, which modulates the beginning of the torque event, increases pulse frequency, and reduces resistance during the non-pulsing portion of the cycle.
This shortens cycle time and increases fluid life.
UAT SERIES
In 2013, Uryu developed and patented the latest innovation in
Pulse Tool technology. Auto Relief
(PAT) enables efficient delivery of torque energy to the application.
Auto Relief responds to everchanging pressures in the pulse unit, applying its energy in a smooth manner to the joint as the torque is developed. The Auto Relief valve is fully open during free run and automatically closes when torque resistance is sensed. No adjustment required. Benefits include elimination of initial torque spike on hard joints, reduction in oil flow resistance, and maximized performance of the tool.
Visit our NEW website www.aimco-global.com
OMEGA PULSE TOOLS: UAT SERIES
PATENTED AUTO RELIEF
TECHNOLOGY:
UAT features patented Auto Relief
Technology providing additional control to the application of torque during the pulsing events.
• Auto Relief eliminates initial spike of torque during a cycle. Highly effective on hard joint applications
• Auto Relief ramps up pressure within the pulse unit resulting in more pulses in less time providing a more efficient and even torque event
Mechanism
(Patented)
■
Fastening efficiency comparison (UAT vs ULT)
A NEW LEAP FORWARD IN
PRODUCTIVITY AND QUALITY:
• Fastening accuracy and time can be improved by as much as 30% depending on application
Visit our NEW website www.aimco-global.com
OMEGA PULSE TOOLS: UAT SERIES
UAT-30D
UAT-40(D)
UAT-60(D)(L)
UAT-80 UAT-130
UAT-150
UAT-50(D)(L)
PISTOL SHUT-OFF
UAT-70(L)
UAT-90(L)
UAT-100(L)
UAT-180
UAT-200
Recommended Air Pressure: 85 psi
MODEL
UAT-30D
UAT-40
UAT-40D
UAT-50
UAT-50D
UAT-50L
UAT-50DL
UAT-60
UAT-60D
UAT-60L
UAT-70
UAT-70L
UAT-80
UAT-90
UAT-90L
UAT-100
UAT-100L
UAT-130
UAT-150
UAT-180
UAT-200
FREE SPEED
RPM
4,200
3,800
3,800
4,600
4,600
4,000
4,000
6,700
6,700
6,000
6,000
5,300
5,600
5,700
5,100
5,200
5.200
4,500
3,900
3,300
2,400
TORQUE RANGE
NM FT-LB
2.5 - 5.5
4.5 - 8
4.5 - 8
7 - 15.5
7 - 15.5
7 - 15.5
7 - 15.5
15 - 32
15 - 32
13 - 28
30 - 55
25 - 48
45 - 63
50 - 85
45 - 75
70 - 130
60 - 110
110 - 150
140 - 210
160 - 250
200 - 400
1.9 - 4.1
3.3 - 5.9
3.3 - 5.9
5.2 - 11.5
5.2 - 11.5
5.2 - 11.5
5.2 - 11.5
11.1 - 23.7
11.1 - 23.7
9.6 - 20.7
22.2 - 40.7
18.5 - 35.5
33.3 - 46.6
37.0 - 62.9
33.3 - 55.5
51.8 - 96.2
44.4 - 81.4
81.4 - 111
103.6 - 155.4
118.4 - 185
148 - 296
LB
WEIGHT
KG
3.7
5.1
6.4
8.1
12.8
2.8
3.2
3.2
3.7
2.0
2.1
2.1
2.1
2.3
2.3
2.0
2.0
2.0
1.9
2.0
2.0
1.7
2.3
2.9
3.7
5.8
1.3
1.5
1.5
1.7
0.9
1.0
1.0
1.0
1.1
1.1
0.9
0.9
0.9
0.9
0.9
0.9
OVERALL LENGTH
IN MM
7.8
8.5
9.5
10.5
11.0
7.3
7.6
7.6
7.8
6.5
6.8
7.0
6.8
7.1
7.1
6.4
6.5
6.4
6.5
6.4
6.5
199
217
240
264
279
186
192
192
199
165
174
177
174
180
180
165
162
165
162
165
162
DRIVE
IN
SOUND LEVEL dB(A)
79
82
82
84
85
80
82
79
82
75
80
80
77
80
78
78
78
75
76
75
75
1/2
1/2
3/4
3/4
3/4
3/8
1/2
1/2
1/2
1/4
3/8
1/4
3/8
3/8
3/8
1/4
3/8
1/4
3/8
1/4
3/8
Air Hose Size: 1/4” ID for UAT-30 to UAT-50, 3/8” ID for UAT-60 to UAT-100, 1/2” ID for UAT-130 to UAT-200
Note Torque Ranges reflect residual B joint torque values
Air Inlet Thread: 1/4” NPT for UAT-30 to UAT-100 3/8” NPT for UAT-130 to UAT-200
UAT Models containing “D” indicate 1/4” quick change bit holder
UAT Models containing “L” indicate models designed to run at 57 PSI air pressure.
Most models can be equipped with TM (Tightening Monitor) feature for use with qualifier systems. Order TM tools by adding “TM“ to model number (for example, UAT-60 becomes UAT-60TM).
AIR USAGE
CFM
16.8
24.6
24.6
24.6
35.2
16.8
18.6
15.8
19.3
8.8
12.3
12.3
8.8
14.0
10.5
10.5
8.8
8.8
8.8
8.8
8.8
UAT-40S
UAT-30SD
UAT-40SD
UAT-50S(L)
UAT-50SD(L)
UAT-60S(L) UAT-60SD(L)
UAT-70S(L)
INLINE SHUT-OFF
Recommended Air Pressure: 85 psi
MODEL
UAT-30SD
UAT-40S
UAT-40SD
UAT-50S
UAT-50SD
UAT-50SL
UAT-50SDL
UAT-60S
UAT-60SD
UAT-60SL
UAT-60SDL
UAT-70S
UAT-70SL
FREE SPEED
RPM
3,400
3,300
3,300
3,900
3,900
3,800
3,800
5,700
5,700
5,300
5,300
4,700
4,400
TORQUE RANGE
NM FT-LB
2.5 - 5.5
4.5 - 8.0
4.5 - 8.0
7.0 - 15.5
7.0 - 15.5
7.0 - 15.5
1.9 - 4.1
3.3 - 5.9
3.3 - 5.9
5.2 - 11.5
5.2 - 11.5
5.2 - 11.5
7.0 - 15.5
15.0 - 32.0
15.0 - 32.0
13.0 - 28.0
13.0 - 28.0
30.0 - 50.0
25.0 - 45.0
5.2 - 11.5
11.1 - 23.7
11.1 - 23.7
9.6 - 20.7
9.6 - 20.7
22.2 - 37.0
18.5 - 33.3
1.9
2.1
2.1
1.9
1.9
1.9
1.9
WEIGHT
LB KG
1.9
1.9
1.9
1.9
1.9
1.9
0.9
0.9
0.9
0.8
0.9
0.9
0.9
1.0
1.0
0.9
0.9
0.9
0.9
9.1
9.4
9.4
8.9
9.0
9.1
9.0
OVERALL LENGTH
IN MM
8.8
8.9
8.8
8.7
8.8
8.9
222
224
227
224
227
224
227
229
232
229
232
239
239
DRIVE
IN
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
1/4
3/8
3/8
Air Hose Size: 1/4” ID for UAT-30 to UAT-50, 3/8” ID for UAT-60 to UAT-70
Note Torque Ranges reflect residual B joint torque values
UAT Models containing “L” indicate models designed to run at 57 PSI air pressure.
Air Inlet Thread: 1/4” NPT for UAT-30 to UAT-70
UAT Models containing “D” indicate 1/4” quick change bit holder
Most models can be equipped with TM (Tightening Monitor) feature for use with qualifier systems. Order TM tools by adding “TM“ to model number (for example, UAT-60 becomes UAT-60TM).
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
SOUND LEVEL dB(A)
78
78
75
68
70
70
77
80
78
75
80
80
77
AIR USAGE
CFM
12.3
7.0
7.0
8.8
8.8
7.0
7.0
10.5
10.5
8.8
8.8
12.3
9.5
Visit our NEW website www.aimco-global.com
OMEGA PULSE TOOLS: UL SERIES
OMEGA UL SERIES
Whether the goal is improving productivity, ergonomics, reliability, or quality, the
UL Series contains the technology to achieve success.
FEATURES AND BENEFITS
• Models available from 6 – 230 Nm (4.4 – 170 Ft-lb)
• Available in Standard, Tightening Monitor, and
Transducerized versions
• High power-to-weight ratio
• Reduced maintenance and extended service life
• Environmentally friendly design
• Accurate and repeatable
UL-30
UL-50
UL-60
UL-70
UL-40
UL-80
UL-90
UL SERIES PISTOL NON SHUT-OFF
MODEL
UL-60D
UL-60
UL-70
UL-80
UL-90
UL-100
UL-130
UL-150
UL-30D
UL-30
UL-40D
UL-40
UL-50D
UL-50
FREE SPEED
RPM
7,000
7,000
5,700
5,900
6,000
5,400
4,400
3,800
5,700
5,700
6,100
6,100
6,400
6,400
TORQUE RANGE
NM FT-LB
6 - 12
6 - 12
11 - 20
13 - 22
18 - 28
22 - 35
22 - 35
32 - 50
40 - 65
45 - 70
60 - 100
80 - 130
100 - 160
150 - 230
4.4 - 8.9
4.4 - 8.9
8.1 - 14.8
9.6 - 16.3
13.3 - 20.7
16.3 - 25.9
16.3 - 25.9
23.7 - 37.0
29.6 - 48.1
33.3 - 50.0
44.4 - 74.0
59.2 - 96.2
74.0 - 118.4
109.9 - 169.6
UL-100
LB
1.8
1.8
2.1
2.5
2.9
3.7
5.1
6.6
1.5
1.5
1.5
1.5
1.7
1.7
WEIGHT
KG
0.8
0.8
1.0
1.1
1.3
1.7
2.3
3.0
0.7
0.7
0.7
0.7
0.8
0.8
UL-130
UL-150
OVERALL LENGTH
IN MM
5.6
5.5
6.0
6.4
6.7
7.0
7.8
8.4
5.4
5.2
5.4
5.2
5.8
5.5
143
140
153
162
170
177
197
213
137
133
137
133
146
140
Omega Series Pulse Unit
❹
❷
❶
❸
❶
Roller bearings – reduced friction
❷
Accumulator – stable fluid temperature
❸
Reduced size – lightweight tools
❹
New O-ring design – better durability
DRIVE
IN
1/4 sq.
3/8 sq.
3/8 sq.
3/8 sq.
1/2 sq.
1/2 sq.
1/2 sq.
3/4 sq.
1/4 hex
3/8 sq.
1/4 hex
3/8 sq.
1/4 hex
3/8 sq.
Recommended Air Pressure: 85 psi
SOUND LEVEL AIR USAGE dB(A) CFM
80
80
80
80
82
80
83
84
75
75
75
75
78
78
14.0
14.0
15.8
16.8
18.6
20.3
22.7
24.7
7.0
7.0
7.0
7.0
10.5
10.5
UL-30S UL-40S
UL SERIES INLINE NON SHUT-OFF
MODEL
FREE
SPEED
RPM
TORQUE RANGE
NM FT-LB LB
WEIGHT
UL-50S
KG IN
UL-60S
OVERALL LENGTH
MM
DRIVE
UL-70S
Recommended Air Pressure: 85 psi
SOUND
LEVEL dB(A)
AIR USAGE
UL-30SD
UL-30S
UL-40SD
UL-40S
UL-50SD
UL-50S
UL-60SD
UL-60S
UL-70S
5,000
5,000
5,000
5,000
6,400
6,400
6,700
6,700
5,400
6 - 12
6 - 12
9 - 20
11 - 22
18 - 28
22 - 35
22 - 35
32 - 50
36 - 60
4.4 - 8.9
4.4 - 8.9
6.7 - 14.8
8.1 - 16.3
13.3 - 20.7
16.3 - 25.9
16.3 - 25.9
23.7 - 37.0
26.6 - 44.4
1.4
1.4
1.4
1.4
1.6
1.6
1.7
1.7
1.9
0.6
0.6
0.6
0.6
0.7
0.7
0.8
0.8
0.9
8.2
8.1
8.2
8.1
8.4
8.2
8.3
8.2
8.8
209
205
209
205
214
208
212
209
223
1/4 hex
3/8 sq.
1/4 hex
3/8 sq.
1/4 hex
3/8 sq.
1/4 hex
3/8 sq.
3/8 sq.
75
72
75
72
78
78
80
80
84
Air Hose Size: 1/4 I.D. for UL-30 (D/SD) - UL-50 (D/SD) – 3/8” I.D. for UL-60 (D/SD) - UL-150 (D/SD) Air Inlet: N.P.T. 1/4 NOTE: Torque ranges reflect residual B joint torque values
All pulse tools ending in “D” include a 1/4” Hex quick-change bit holder.
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
8.1
8.1
8.1
8.1
12.3
12.3
15.8
15.8
14.0
Visit our NEW website www.aimco-global.com
IN CFM
OMEGA PULSE / ACRA-PULSE SERIES
ULT-150
ULT-180
ULT-40C
ULT-50C
ULT-60C
ULT-70C
ULT-70CH
OMEGA PULSE ULT SERIES PISTOL / ANGLE SHUT-OFF
FREE SPEED
RPM
TORQUE RANGE
NM FT-LB LB
WEIGHT
KG
OVERALL LENGTH
IN MM MODEL
PISTOL
ULT-150
ULT-180
ANGLE
ULT-40C
ULT-50C
ULT-60C
ULT-70C
ULT-70CH
3,700
3,300
3,500
4,500
5,200
4,400
2,500
140 - 210
160 - 250
4.5 - 7.5
7.0 - 15.5
13 - 28
20 - 35
30 - 50
104 - 155
118 - 185
3.3 - 5.6
5.2 - 11.5
9.6 - 20.7
14.8 - 25.9
22.2 - 37.0
6.4
8.1
2.9
3.0
3.2
3.6
4.1
2.9
3.7
1.30
1.35
1.45
1.65
1.85
9.5
10.4
9.8
9.8
10.3
10.8
11.4
240
264
250
250
261
275
290
DRIVE
IN
3/4” Sq. Dr.
3/4” Sq. Dr.
3/8” Sq. Dr.
3/8” Sq. Dr.
3/8” Sq. Dr.
3/8” Sq. Dr.
1/2” Sq. Dr.
SOUND LEVEL AIR USAGE dB(A) CFM
“L” following model number denotes Low Air Pressure type
NOTE: Torque ranges reflect residual B joint torque values
“H” within model number denotes High Torque type
82
82
70
78
80
82
82
24.7
24.7
7.0
8.6
10.5
12.3
12.3
UX-T700L
UXR-T1820
UXR-T3000S
ACRA-PULSE PISTOL / INLINE SHUT-OFF 3/8” – 1/2” DRIVE
MODEL
FREE
SPEED
RPM
TORQUE RANGE
NM FT-LB
OVERALL
LENGTH
MM IN
WEIGHT
LB KG
FROM CENTER TO
OUTSIDE
MM IN
PISTOL 3/8” - 1/2” DRIVE
UX-T700L*
UXR-T2000
INLINE
7,500
PISTOL 3/4” - 1” DRIVE
UXR-T1820 4,400
4,000
UXR-T2400S*
UXR-T3000S
3,600
4,400
13 - 26 10 - 19
150 - 250 110 - 180
200 - 400 150 - 290
360 - 650 260 - 470
450 - 850 330 - 620
187
270
303
444
477
7.4
10.6
11.9
17.5
18.8
3.2
1.5
9.9
4.5
15.0
6.8
26.5
12.0
32.0
14.5
25.5
42.0
47.0
61.5
62.0
1.0
1.7
1.8
2.4
2.4
SQ.
DRIVE
IN
3/8
1
1
3/4
3/4
Recommended Air Pressure: 85 psi
NOISE
LEVEL dB(A)
AIR USAGE
CFM
72
84
85
85
85
10.5
Air Hose Size: 3/8” I.D. 1/2” I.D. for UXR-T1820 - UXR-T3000S Air Inlet: N.P.T. 1/4” 3/8” for UXR-T1820 & UXR-T2000 1/2” for UXR-T2400S & UXR-T3000S
NOTE: Torque ranges reflect residual B joint torque values Inside Trigger Standard (UXR-T2400S – UXR-T3000S)
* UX-T700L and UXR-T2400S models can be equipped with a TM (Tightening Monitor) feature for use with qualifier systems. Order TM tools by adding “TM“ to model number (for example, UX-T700L becomes UX-T700LTM).
24.7
34.0
35.3
37.1
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Visit our NEW website www.aimco-global.com
ACRA-PULSE SERIES
U-350D
PISTOL NON SHUT-OFF 1/4” HEX DRIVE
UX-450D
MODEL
U-350D
UX-450D
UX-500D
UX-612D
FREE SPEED
RPM
10,500
9,500
9,300
9,300
TORQUE RANGE
NM FT-LB
3.5 - 5.8
8 - 14
13 - 20
16 - 28
2.5 - 4.2
5.8 - 10
10 - 15
12 - 20
Air Hose Size: 1/4 I.D. for U-350D - UX-500D – 3/8” I.D. for UX-612D
All Tools Standard with 1/4” Quick Change Chuck
OVERALL LENGTH
MM IN
154
152
152
165
6.1
6.0
6.0
6.5
LB
WEIGHT
KG
1.7
1.9
1.9
2.1
Air Inlet Thread: N.P.T. 1/4
0.8
0.9
0.9
1.0
UX-500D UX-612D
Recommended Air Pressure: 85 psi
FROM CENTER TO OUTSIDE NOISE LEVEL AIR USAGE
MM IN dB(A) CFM
22.0
22.0
22.0
22.5
0.9
0.9
0.9
0.9
<
74
70
70
75
5.3
7.0
8.8
11.2
NOTE: Torque ranges reflect residual B joint torque values
UX-450
UX-612
UX-500 UX-700
PISTOL NON SHUT-OFF 3/8” – 1/2” DRIVE
MODEL
UX-450
UX-500
UX-612
UX-700
UX-800
UX-900
UX-1000
UX-1300
UX-1400
FREE SPEED
RPM
9,000
7,600
6,800
6,200
5,300
9,500
9,300
9,300
9,000
TORQUE RANGE
NM FT-LB
9 - 15
15 - 25
20 - 35
25 - 45
6.5 - 11
11 - 19
15 - 25
20 - 35
35 - 60
45 - 75
25 - 45
35 - 55
50 - 95 40 - 70
80 - 130 60 - 95
100 - 160 75 - 120
OVERALL LENGTH
MM IN
175
181
187
205
224
147
147
160
169
Air Hose Size: 1/4” I.D. for U-410 - UX-500 – 3/8” I.D. for UX-612 - UX-1400
6.9
7.1
7.4
8.1
8.8
5.8
5.8
6.3
6.7
WEIGHT
LB KG
1.9
0.9
1.9
0.9
2.1
1.0
3.0
1.4
3.7
1.7
4.1
1.9
4.8
2.2
5.9
2.7
7.0
3.2
UX-800
UX-1300
UX-1400
UX-900
UX-1000
Recommended Air Pressure: 85 psi
FROM CENTER TO OUTSIDE SQ. DRIVE NOISE LEVEL AIR USAGE
MM IN IN dB(A) CFM
28.0
30.0
33.0
36.0
40.0
22.0
22.0
22.5
25.5
0.9
0.9
0.9
1.0
1.1
1.2
1.3
1.4
1.6
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
65
70
75
73
73
75
75
76
78
14.1
14.7
17.9
19.4
21.1
7.0
8.8
11.2
12.3
Air Inlet: N.P.T. 1/4” NOTE: Torque ranges reflect residual B joint torque values
PISTOL NON SHUT-OFF 3/4” – 1” DRIVE
UX-1620 UXR-1820
UXR-2000
Recommended Air Pressure: 85 psi
MODEL
UX-1620
UXR-1820
UXR-2000
FREE SPEED
RPM
5,000
4,600
4,200
TORQUE RANGE
NM FT-LB
120 - 190
160 - 250
300 - 450
90.0 - 140.0
120.0 - 185.0
220.0 - 330.0
OVERALL LENGTH
MM IN
241
242
282
9.5
9.5
11.1
WEIGHT
LB KG
7.9
9.0
14.3
3.6
4.1
6.5
Air Hose Size: 3/8” I.D. for UX-1620 1/2” I.D. for UXR-1820
Air Inlet: N.P.T. 1/4” for UX-1620 N.P.T. 3/8” for UXR-1820, UXR-2000
NOTE: Torque ranges reflect residual B joint torque values Torque Control in Left-Hand Rotation Available for UXR-2000
FROM CENTER TO OUTSIDE SQ. DRIVE NOISE LEVEL AIR USAGE
MM IN IN dB(A) CFM
40.0
42.0
47.0
1.6
1.7
1.8
3/4
3/4
3/4
82
84
85
22.9
26.3
31.5
AUTO REVERSING
MODEL
UX-ST800
FREE
SPEED
RPM
7,300
TORQUE
NM
RANGE
FT-LB
OVERALL
LENGTH
MM IN
35 - 55 25 - 40 195 7.7
WEIGHT
LB KG
3.8
1.8
FROM CENTER TO
OUTSIDE
MM IN
28.0
1.1
Air Hose Size: 3/8” I.D. Air Inlet: N.P.T. 1/4”
NOTE: Torque ranges reflect residual B joint torque values
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Recommended Air Pressure: 85 psi
NOISE
LEVEL dB(A)
AIR
USAGE
CFM
75 10.5
Visit our NEW website www.aimco-global.com
UX-ST800
ACRA-PULSE SERIES
1/4” Hex Drive 3/8” Sq. Drive
1/2” Sq. Drive
UX-450SD
UX-612S
U-310SD
UX-900S
UX-1000S
UX-1300S
U-410S
UX-500SD
UX-700S
3/4”–1” Sq. Drive
U-350SD
UX-450S
UX-612SD
U-410SD
UX-700SD
UX-500S
INLINE NON SHUT-OFF
MODEL
FREE
SPEED
RPM
TORQUE RANGE
NM FT-LB
OVERALL
MM
LENGTH
IN
1/4” Hex Drive (Tools Come Standard with 1/4” Quick Change Chuck)
U-310SD 11,000 2.5 - 3.1
1.8 - 2.2
222
U-350SD
U-410SD
10,500
10,500
3.5 - 5.8
7 - 10
2.5 - 4.2
5.0 - 7.2
238
240
UX-450SD
UX-500SD
UX-612SD
UX-700SD
3/8” Sq. Drive
U-410S
UX-450S
UX-500S
UX-612S
UX-700S
UX-800S
1/2” Sq. Drive
UX-900S
UX-1000S
UX-1300S
9,500
9,300
9,300
9,000
10,500
9,500
9,300
9,300
9,000
9,000
7,600
6,800
6,200
8 - 14 5.8 - 10
13 - 20 10 - 15
16 - 28 12 - 20
20 - 36 16 - 28
7 - 10
9 - 15
5.0 - 7.2
6.5 - 11
15 - 25 11 - 19
20 - 35 15 - 25
25 - 45 20 - 35
35 - 60 25 - 45
45 - 75 35 - 55
50 - 95 40 - 70
80 - 130 60 - 95
239
244
253
249
239
234
239
248
244
250
310
320
336
3/4” Drive
UXR-2000S*
1” Sq. Drive
UXR-2400S*
UXR-3000S*
4,200
4,000
4,400
300 - 450 220 - 330
400 - 650 290 - 470
500 - 850 360 - 630
340
385
455
12.2
12.6
13.2
13.4
15.2
17.9
8.7
9.4
9.5
9.4
9.5
10.0
9.8
9.4
9.2
9.4
9.8
9.5
9.8
Air Inlet N.P.T.: 1/4” 3/8” for UXR-2000S 1/2” for UXR-2400S and UXR-3000S
*Torque control in left-hand rotation available
WEIGHT
LB KG
1.8
1.8
2.0
2.2
2.8
3.2
3.9
4.6
6.6
1.5
1.5
1.8
1.8
2.0
2.2
2.8
15.4
7.0
23.7
11.0
29.3
13.3
0.8
0.8
0.9
1.0
1.3
1.5
1.8
2.1
2.6
0.6
0.7
0.8
0.8
0.9
1.0
1.3
UX-800S
FROM CENTER TO
OUTSIDE
MM IN
22.0
22.0
22.0
23.3
26.5
35.5
18.0
22.0
22.0
22.0
22.0
23.3
26.5
37.5
39.0
42.0
47.0
55.0
62.0
0.9
0.9
0.9
0.9
1.0
1.0
1.1
1.1
1.3
0.7
0.7
0.9
0.9
0.9
0.9
1.0
1.8
2.1
2.1
UXR-2000S
UXR-2400S
UXR-3000S
NOISE
LEVEL dB(A)
Recommended Air Pressure: 85 psi
AIR
USAGE
CFM
AIR HOSE
SIZE (I.D.)
<
70
70
70
75
78
75
74
74
70
<
70
70
75
78
5.3
7.0
8.8
11.1
12.3
14.2
5.3
5.3
5.3
7.0
8.8
11.1
12.3
75
75
77
85
14.9
17.9
19.4
31.6
3/8”
3/8”
3/8”
1/2”
85
85
35.2
37.1
1/2”
1/2”
NOTE: Torque ranges reflect residual B joint torque values
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
ALPHA-70C
ALPHA-70CH
UX-500C
ANGLE 3/8” – 1/2” DRIVE
UX-612C UX-700C UX-800C UX-1000C
Recommended Air Pressure: 85 psi
MODEL
ALPHA-70C
ALPHA-70CH
UX-500C
UX-612C
UX-700C
UX-800C
UX-1000C
FREE SPEED
RPM
6,300
3,600
9,300
9,800
9,500
9,000
6,800
TORQUE RANGE
NM FT-LB
28 - 45
50 - 76
13 - 20
16 - 28
20 - 36
29 - 43
50 - 80
20.2 - 32.5
36.1 - 56.0
10.0 - 15.0
12.0 - 20.0
16.0 - 28.0
20.0 - 31.0
40.0 - 58.0
LB
WEIGHT
KG
3.7
4.3
6.8
3.9
4.4
2.8
3.0
1.7
1.9
3.1
1.8
2.0
1.3
1.4
OVERALL LENGTH
MM IN
266
282
270
283
273
285
365
10.5
11.1
10.6
11.1
10.8
11.2
14.4
SQ. DRIVE NOISE LEVEL AIR USAGE
IN dB(A) CFM
3/8
1/2
3/8
3/8
3/8
3/8
1/2
82
82
82
85
85
85
90
15.8
15.8
8.8
11.2
12.3
14.1
17.9
Air Hose Size:
*
1/4” I.D. for UX-500C – 3/8” I.D. for ALPHA-70C, ALPHA-70CH, UX-612C - UX-1000C Air Inlet: N.P.T. 1/4 NOTE: Torque ranges reflect residual B joint torque values logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Visit our NEW website www.aimco-global.com
UDBP PULSE SERIES CORDLESS TOOLS
The next-generation cordless pulse tool combines industry-leading pulse technology with Lithium-Ion battery power.
FEATURES AND BENEFITS
• Uryu Direct Battery Pulse (UDBP) – This new design connects the pulse unit directly to the motor — no reduction gearing — resulting in a tool with less noise and vibration
• Brushless Internal Permanent Magnet (IPM) motor provides longer motor life and more efficiency allowing more fastening cycles per battery charge
• Auto Relief Technology provides additional control to the application of torque during the pulsing events
• On board LEDs for application illumination
• Li-Ion battery provides more power and ends the “batterymemory” issues of NiCd batteries
• Tool/battery combination is 27% lighter than earlier UBP tools
• RF Types transmit “good” signal to receiver (sold separately) over 426 Mhz
• “Good” signal can be used for Poka-Yoke or Bolt Counting
UDBP-TA50
UDBP-TA70(P)
Battery: UB111Li,
UB222Li, UB333Li
Charger: UBC
The lithium-ion battery provides excellent power-toweight ratio. It does not experience the memory effect caused by repeated recharging after being only partially discharged.
The battery power indicator provides you with a visual indication to charge the lithium-ion battery.
●
= good charge
●
= low charge (recharging needed)
●
= very low charge (immediate recharging needed)
The slide design battery provides the high-energy efficiency in power and no damage to contact.
MODEL TYPE
UDBP-TA40(RF) Shut-off
UDBP-TA40(P)-RF Shut-off
UDBP-TA50(RF) Shut-off
UDBP-TA50(P)-RF Shut-off
UDBP-TA60(RF) Shut-off
UDBP-TA60(P)-RF Shut-off
UDBP-TA70(P)-RF Shut-off
FREE
SPEED
RPM
4,800
4,800
4,800
4,800
4,800
4,800
4,800
TORQUE RANGE
NM FT-LB
4.5 - 8
4.5 - 8
6.5 -13
7 - 15
3.3 - 5.9
3.3 - 5.9
4.8 - 9.6
5.1 - 11.1
13 - 26 9.6 - 19.2
15 - 28 11.1 - 20.7
26 - 47 19.2 - 34.7
WEIGHT W/
BATTERY
LB
3.7
3.7
4.4
3.1
3.1
3.1
3.1
LENGTH
IN
8.8
8.7
9.2
8.2
8.2
8.2
8.1
(P) Designates 3/8” square drive anvil with socket retainer pin. Tools with no (P) suffix have a quick-change driver anvil.
Adding “KIT” to the tool model number will include two (2) batteries and the battery charger with the specified tool. Example: UDBP-T50KIT
NOTE: Torque ranges reflect residual B joint torque values.
Charge Time: 80% battery capacity - 40 minutes, 100% battery capacity - 64 minutes.
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
DRIVE
IN
1/4 hex
1/4 hex
1/4 hex
3/8 sq.
1/4 hex
3/8 sq.
3/8 sq.
Visit our NEW website www.aimco-global.com
SOUND
LEVEL dB(A)
77
76
76
76
76
75
75
(RF) represents the tool with wireless transmission feature.
VOLTAGE
V
11.1
11.1
11.1
11.1
22.2
22.2
33.3
BATTERY
UB111Li
UB111Li
UB111Li
UB111Li
UB222Li
UB222Li
UB333Li
CHARGER
UBC
UBC
UBC
UBC
UBC
UBC
UBC
UDBP PULSE TOOL BATTERIES
UDBP SERIES KITS AND COMPONENTS
Standard Shut Off Type
TOOL TOOL BATTERY (SUPPLIED SEPARATELY)
UDBP-TA40
UDBP-TA50
UB111LI
UB111LI
UDBP-TA50(P)
UDBP-TA60
UDBP-TA60(P)
UB111LI
UB-222LI
UB-222LI
UDBP-TA70(P) UB-333LI
Shut Off Type With Rf Communication (Poka Yoke)
TOOL
UDBP-TA40RF
UDBP-TA40(P)RF
UDBP-TA50RF
UDBP-TA50(P)-RF
UDBP-TA60RF
UDBP-TA60(P)-RF
UDBP-TA70(P)-RF
2 CHANNEL
RF RECEIVER
TWF-600R
TWF-600R
TWF-600R
TWF-600R
TWF-600R
TWF-600R
TWF-600R
TOOL BATTERY
(SUPPLIED
SEPARATELY)
UB111LI
UB111LI
UB111LI
UB111LI
UB-222LI
UB-222LI
UB-333LI
CHARGER
UBC
UBC
UBC
UBC
UBC
UBC
UBC
CHARGER
UBC
UBC
UBC
UBC
UBC
UBC
TOOL PLUS
1 BATTERY
UDBP-TA40RF-B
UDBP-TA40(P)RF-B
UDBP-TA50RF-B
UDBP-TA50(P)-RF-B
UDBP-TA60RF-B
UDBP-TA60(P)-RF-B
UDBP-TA70(P)-RF-B
TOOL PLUS 1 BATTERY
UDBP-TA40-B
UDBP-TA50-B
UDBP-TA50(P)-B
UDBP-TA60-B
UDBP-TA60(P)-B
UDBP-TA70(P)-B
TOOL PLUS 2 BATTERIES AND 1 CHARGER
UDBP-TA40-KIT
UDBP-TA50-KIT
UDBP-TA50(P)-KIT
UDBP-TA60-KIT
UDBP-TA60(P)-KIT
UDBP-TA70(P)-KIT
TOOL PLUS 2 BATTERIES
AND 1 CHARGER
UDBP-TA40RF-KIT
UDBP-TA40(P)RF-KIT
UDBP-TA50RF-KIT
UDBP-TA50(P)-RF-KIT
UDBP-TA60RF-KIT
UDBP-TA60(P)-RF-KIT
UDBP-TA70(P)-RF-KIT
TOOL PLUS 2 BATTERIES,
1 CHARGER, AND
1 RECEIVER
UDBP-TA40RF-KTR
UDBP-TA40(P)RF-KTR
UDBP-TA50RF-KTR
UDBP-TA50(P)-RF-KTR
UDBP-TA60RF-KTR
UDBP-TA60(P)-RF-KTR
UDBP-TA70(P)-RF-KTR
BODY JACKETS FOR UDBP SERIES
BATTERY COVERS
RECEIVER
863-964-1
863-965-1
863-966-1
MODEL
863-964-1
863-965-1
863-966-1
DESCRIPTION
Body Jacket for UDBP 40/50 Series
Body Jacket for UDBP 60 Series
Body Jacket for UDBP 70 Series
863-976-1
863-977-1
863-978-1
MODEL DESCRIPTION
863-976-1 Battery Cover for UDBP 40/50 Series
863-977-1 Battery Cover for UDBP 60 Series
863-978-1 Battery Cover for UDBP 70 Series
MODEL
TWF-600R
DESCRIPTION
Receiver for UDBP (RF) type tools 426 Mhz (sold separately)
www.aimco-global.com 800-852-1368
Visit our NEW website www.aimco-global.com
UDP-TA SERIES
DIRECT PLUG IN, SHUT OFF PULSE TOOLS
FEATURES AND BENEFITS
• Direct Wall Plug in – Tool plugs directly to
100 – 115 VAC wall power with circuit protection breaker box or integrated power cable balancer
• Brushless (IPM) Motor provides long motor life with integrated trigger activated fan for increased duty cycle
• Patented Auto Relief Pulse Unit Technology
• Lightweight, high impact, rugged plastic housing for superior ergonomics
• Optional power cable integrated balancer available
UDP-TA40(B)
MODEL TORQUE RANGE
NM FT-LB
Bottom Cable Exit Models (denoted by B)
UDP-TA40 (B) 4.5 - 8.0
UDP-TA40D (B)
UDP-TA50 (B)
UDP-TA50D (B)
UDP-TA55 (B)
4.5 - 8.0
7.0 - 15.5
7.0 - 15.5
12.5 - 25.0
3.3 - 5.9
3.3 - 5.9
5.2 - 11.5
5.2 - 11.5
9.3 - 18.5
RPM
FREE SPEED
3,300
3,300
3,900
3,900
4,800
OVERALL LENGTH
IN MM
7.1
7.2
7.1
7.2
7.3
179.5
182.5
179.5
182.5
184.5
Top Cable Exit Models (denoted by (B-TL) )
UDP-TA40 (B-TL) 4.5 - 8.0
UDP-TA40D (B-TL)
UDP-TA50 (B-TL)
4.5 - 8.0
7.0 - 15.5
UDP-TA50D (B-TL)
UDP-TA55 (B-TL)
7.0 - 15.5
12.5 - 25.0
3.3 - 5.9
3.3 - 5.9
5.2 - 11.5
5.2 - 11.5
9.3 - 18.5
3,300
3,300
3,900
3,900
4,800
7.1
7.2
7.1
7.2
7.3
179.5
182.5
179.5
182.5
184.5
3.0
3.0
3.0
3.0
3.0
UDP-TA50D(B-TL)
LB
WEIGHT
KG
3.0
3.0
3.0
3.0
3.0
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
3/8” Sq.
1/4” Hex
3/8” Sq.
1/4” Hex
3/8” Sq.
DRIVE
3/8” Sq.
1/4” Hex
3/8 Sq.
1/4” Hex
3/8” Sq.
OPTIONAL ACCESSORIES
MODEL
UCB-25
UCB-TA-CBL
910-629-0
910-618-0
910-619-0
910-627-0
DESCRIPTION
Power Cable Balancer
110VAC Wall-to-Breaker Power Cable
Breaker Unit
5M UDP Tool to Breaker Cable
10M UDP Tool to Breaker Cable
5M UDP Extension Cable*
* Extension Cables connect between Tool and Breaker Cables
UCB-25
Power Cable
Balancer
910-619-0
10M Tool-to-Breaker Cable
Visit our NEW website www.aimco-global.com
910-629-0 Breaker Unit
UCB-TA-CBL Wall-to-Breaker
Power Cable
UAN & URW SERIES NUTRUNNERS
UAN SERIES ANGLE NUTRUNNERS
Designed for fastening in tight quarters or applications not served well by a pulse tool. The UAN Series transfers torque through beveled angle gears, continuously driving the fastener. When the resistance to rotation overcomes the spring resistance on the clutch, the tool will disengage at the adjusted torque value. Low reaction force characteristics on hard joints make it comfortable for the operator to use. Ideal for applications ranging from 6 – 60 Nm (4 – 44 ft-lb).
• Torque Control
• Electronically Monitored or Controlled type
ANGLE/INLINE TORQUE CONTROL UAN SERIES
MODEL
TORQUE RANGE
NM FT-LB
FREE
SPEED
RPM
OVERALL
LENGTH
MM IN
ANGLE HEAD
MM
HEIGHT
IN
ANGLE
UAN-611R-60C 6.5 - 12.0
4.3 - 8.6
UAN-611R-50C 8.5 - 15.0
5.7 - 10.8
UAN-611R-40C 10.0 - 18.0
7.2 - 12.9
UAN-611R-30C 13.0 - 25.0
9.3 - 18.0
UAN-701R-60C 20.0 - 31.0 14.5 - 23.1
UAN-701R-40C 28.0 - 45.0 21.0 - 33.3
UAN-701R-30C 37.0 - 60.0 27.5 - 44.1
Air Hose Size: 3/8 I.D.
270
600
400
300
620
470
400
Air Inlet: N.P.T. 1/4
383 15.1
373 14.7
373 14.7
373 14.7
445 17.5
455 17.9
455 17.9
47
47
51
58
47
47
47
1.9
1.9
2.0
2.3
1.9
1.9
1.9
UAN-611R-30C
FROM CENTER
TO OUTSIDE
MM IN
WEIGHT
LESS SOCKET
KG LB
Recommended Air Pressure: 85 psi
SQUARE
DRIVE
IN
NOISE
LEVEL dB(A)
AIR
USAGE
CFM
14.0
14.0
14.0
14.0
14.0
18.0
18.0
0.5
0.5
0.7
0.7
0.5
0.5
0.5
1.6
2.4
2.4
2.4
1.6
1.6
1.6
3.5
5.3
5.3
5.3
3.5
3.5
3.5
3/8
3/8
3/8
1/2
3/8
3/8
3/8
80
85
85
85
80
80
80
21.2
21.2
21.2
21.2
31.8
31.8
31.8
URW SERIES IN-LINE RATCHET WRENCHES
Designed to set flush over the fastener head, the URW Series is ideal for narrow fastening spaces. Motor torque is transferred from a gear driven, dual lobed cam that pushes a spring loaded push rod, rotating the socket one tooth at a time. A wide variety of socket sizes, head thicknesses, and tool lengths allow the URW Series access to many difficult applications.
URW-8 URW-9N
URW SERIES RATCHET WRENCHES
MAX TORQUE
NM FT-LB
FREE SPEED
RPM
OVERALL LENGTH
MM IN MODEL
STRAIGHT HEAD
URW-6
URW-8N
URW-8
URW-9N
URW-10N
URW-12N
Air Hose Size: 3/8 I.D.
11
16
16
31
57
59
8.1
11.8
11.8
22.9
42.2
43.7
Air Inlet: N.P.T. 1/4
210
260
240
140
155
145
292
300
360
380
394
397
11.5
11.8
14.2
15.0
15.5
15.6
URW-10N
LB
WEIGHT
KG
2.5
4.2
5.0
5.2
5.8
5.9
Visit our NEW website www.aimco-global.com
1.2
1.9
2.3
2.4
2.7
2.7
URW-12N
Recommended Air Pressure: 85 psi
MIN/MAX HEX SOCKET SIZE
MM IN
AIR USAGE
CFM
6 - 12
7 - 15
7 - 15
7 - 15
10 - 19
12 - 23
1/4 - 7/16
7/16 - 9/16
7/16 - 9/16
7/16 - 9/16
9/16 - 3/4
3/8 - 13/16
9.9
19.5
19.8
23.7
25.0
25.0
TUBENUT & GEARED NUTRUNNERS
UOW SERIES OPEN-END NUTRUNNERS
Designed for tubenut fastening, the UOW Series can transfer torque through a variety of options.
• Stall Type — Depending on the application requirements, the standard
UOW Series will stall when torque resistance matches power output
• Mechanical Shut-off Type — For greater torque accuracy and less reaction impulse to the operator, the UOW-T Series incorporates a mechanical clutch to shut off the tool at the preset torque
• Electronically Monitored Type — For critical torque applications requiring monitoring or controlling of the fastening torque, the UOW-M
Series utilizes a transducer to signal the clutch shut-off
• UOW series incorporates a one-hand, two-step throttle, which automatically reverses the socket to a preset open position
UOW-11-10
UOW-11-14
UOW-11-22
UOW/UOW-T SERIES TUBENUT WRENCHES
MODEL
STALL
UOW-11-10
UOW-11-14
UOW-11-22
UOW-11-30
SHUT-OFF CLUTCH
UOW-T60-10
UOW-T60-14
UOW-T60-22
UOW-T60-30
GEARED WRENCHES
UGW-6N
UGW-8N
MAX TORQUE/RANGE
NM FT-LB
13
16
24
32
4 - 14
5 - 17
7 - 24
10 - 32
18
23
9.6
11.8
17.8
23.7
3.0 - 10.4
3.7 - 12.6
5.2 - 17.8
7.4 - 23.7
13.3
17.0
FREE
SPEED
RPM
390
290
220
160
300
240
170
130
530
410
OVERALL LENGTH
MM IN
295
311
326
347
370
385
400
420
310
322
11.7
12.3
12.8
13.7
14.6
15.1
15.8
16.6
12.2
12.7
Air Hose Size: 3/8 I.D. Air Inlet: N.P.T. 1/4
UOW-11-30
LB
WEIGHT
KG
3.3
3.5
3.9
4.4
4.6
4.9
5.2
5.7
3.1
3.2
2.1
2.2
2.4
2.6
1.4
1.5
1.5
1.6
1.8
2.0
UOW-T60-22 UGW-8N
MIN/MAX HEX SOCKET SIZE
MM IN
Recommended Air Pressure: 85 psi
NOISE
LEVEL dB(A)
AIR
USAGE
CFM
7 - 12
10 - 17
11 - 24
14 - 36
7 - 12
10 - 17
11 - 24
14 - 36
9 - 12
10 - 17
1/4 - 7/16
7/16 - 5/8
7/16 - 5/8
5/8 - 1-3/16
1/4 - 7/16
7/16 - 5/8
7/16 - 5/8
5/8 - 1-3/16
3/8 - 7/16
7/16 - 5/8
76
76
76
76
76
76
76
76
76
76
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
* logo indicates where ERGO-DRIVE sockets/extensions benefit tool operation.
Visit our NEW website www.aimco-global.com
DYNATORQUE MANUAL TORQUE MULTIPLIERS
ATM-800
ATM-1800
ATM-3800
FEATURES AND BENEFITS
Manual Torque Multipliers offer the perfect, economical solution to high torque bolting applications.
• Superior power to weight ratio
• Delivered torque accuracy +/- 4%
• Anti-Wind Up safety feature (2,800 NM models and up) prevents input device from springing backward when released
• True torque multiplication ratios
• Standard reaction arms supplied. Custom reaction arms/nose extensions available to suit specific applications
• No preventative maintenance required
• Overload protected by shear-drive design (spare torsion shaft included). Easily replace sheared-off pins at the work site
MODEL
ATM-800
ATM-1800
ATM-2800
ATM-3800
ATM-5000
ATM-8000
ATM-12000
ATM-16000
INPUT
IN
1/2
3/4
1/2
3/4
3/4
3/4
3/4
3/4
OUTPUT
IN
3/4
1
1
1
1.5
1.5
1.5
2.5
*
Weight shown does not include weight of reaction device.
RATIO
1:3.5
1:3.6
1:13
1:13
1:17
1:49
1:58
1:75
MAX TORQUE
OUTPUT
Nm Ft-Lb
800
1,800
2,800
3,800
5,000
8,000 5,904
12,000 8,856
16,000 11,808
590
1,238
2,066
2,804
3,690
A B
(MM) (MM)
65
90
95
95
120
132
156
215
C D
(MM) (MM)
268
272
292
105 132
150 188
200 240
200
215
240
272
344
348
370
130
132
132
132
150
200
200
225
WEIGHT*
LB KG
2.9
6.6
11.5
11.5
15.4
25.4
11.5
30.9
14.0
57.3
26.0
1.3
3.0
5.2
5.2
7.0
CARRYING CASE
All DynaTorque Multipliers are supplied in a rugged, weather-resistant, portable carrying case.
ATM-16000
Visit our NEW website www.aimco-global.com
US-LT PNEUMATIC SCREWDRIVERS
TORQUE CONTROL AUTOMATIC SHUT-OFF TYPE
• Precise repeatability improves quality
• Minimal wear on internal parts for longer life
• Quick shut off for minimum torque reaction
• Speed choice for flexibility
• Easy external torque adjustment
• Midrange air motor provides high speed during entire cycle
• Ideal for industrial torque control applications
US-LT30B Series
US-LT50B Series
US-LT10B
US-LT20B Series
US-LT40B Series
TORQUE CONTROL LIGHT TOUCH (LT) SERIES – PUSH-TO-START INLINE
MODEL
TORQUE RANGE
NM IN-LB
FREE SPEED OVERALL LENGTH
RPM MM IN
US-LT10B 0.2 - 0.6
US-LT20B-10 0.4 - 1.1
US-LT20B-18 0.3 - 0.7
US-LT30B-11 1.1 - 2.1
US-LT30B-17 0.7 - 1.5
1.8 - 5.3
3.1 - 9.7
2.2 - 6.2
9.7 - 18.5
6.2 - 13.2
US-LT30B-23 0.4 - 1.0
3.5 - 8.8
US-LT40B-08 1.6 - 4.0
14.1 - 35.2
US-LT40B-15 1.0 - 2.2
US-LT40B-21 1.0 - 1.7
6.2 - 19.4
6.2 - 15.0
US-LT50B-05 5.0 - 10.2
44.0 - 92.4
US-LT50B-08 3.0 - 5.5
26.4 - 48.4
US-LT50B-17 1.5 - 2.6
9.7 - 23.0
1,000
1,000
1,800
1,100
1,700
2,300
800
1,500
2,100
480
800
1,700
191
180
180
187
187
187
209
209
209
240
240
240
Air Hose Size: 1/4 I.D. for US-LT10B - US-LT40B Series – 3/8” I.D. for US-LT50B Series
Each model is equipped with its standard and alternate clutch springs
7.4
8.2
8.2
8.2
9.5
7.5
7.1
7.1
7.4
7.4
9.5
9.5
Recommended Air Pressure: 85 psi
WEIGHT
LB KG
FROM CENTER TO OUTSIDE NOISE LEVEL AIR USAGE
MM IN dB(A) CFM
0.9
1.4
1.4
1.4
2.2
0.6
0.7
0.7
0.9
0.9
2.2
2.2
0.3
0.3
0.3
0.4
0.4
0.4
0.7
0.7
0.7
1.0
1.0
1.0
12.0
13.0
13.0
15.5
15.5
15.5
16.5
16.5
16.5
19.5
19.5
19.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
75
70
70
70
70
71
70
70
74
74
75
75
Air Inlet: 1/8 for US-LT10B - US-LT20B Series – 1/4” for US-LT30B - US-LT50B Series
7.0
10.5
10.5
10.5
17.5
5.2
5.6
5.6
7.0
7.0
17.5
17.5
EXTERNAL TORQUE ADJUSTMENT
(AIR SHUT-OFF)
Set the hand driver into the key hole on the Adjusting
Gear, turn clockwise to increase torque. Turn counter clockwise to decrease torque.
408-088-2
SILENCER ASSEMBLIES
MODEL
DIRECT
TYPE
SILENCER
LEADER
HOSE
ASSEMBLY
US-LT10 Series N/A
US-LT20 Series N/A
US-LT30 Series 408-088-2
US-LT40 Series 496-088-1
934-201-0
934-201-0
934-150-0
934-150-0
EXHAUST
HOSE
ASSEMBLY
459-885-1
455-885-1
408-885-0
—
Visit our NEW website www.aimco-global.com
US-LT PNEUMATIC SCREWDRIVERS
US-LT30B_C Series US-LT40B_C Series US-LT40_C Series
US-LT30BL Series US-LT40BL Series
TORQUE CONTROL LIGHT TOUCH (LT) SERIES – ANGLE AND LEVER
MODEL
ANGLE
US-LT30B-11C
US-LT30B-17C
US-LT40B-03C
US-LT40B-05C
US-LT40B-08C
US-LT40B-15C
US-LT40-03C
US-LT40-05C
US-LT40-08C
LEVER
US-LT30BL-11
US-LT30BL-17
US-LT40BL-08
US-LT40BL-15
TORQUE RANGE
SOFT JOINT
NM IN-LB
1.1 - 2.1
0.7 - 1.5
5.0 - 10.0
3.5 - 18.5
3.5 - 13.2
44 - 88
2.3 - 5.7
20.0 - 49.5
1.6 - 4.0
1.0 - 2.2
8.7 - 34.7
8.7 - 19.4
5.0 - 10.0
43.4 - 86.8
2.3 - 5.7
1.6 - 4.0
1.1 - 2.1
0.7 - 1.5
9.7 - 18.5
6.2 - 13.2
1.6 - 4.0
14.1 - 35.2
1.0 - 2.2
8.8 - 19.4
Angle Head Height: 32 - 36mm
20.0 - 50.2
8.7 - 34.7
FREE
SPEED
RPM
1,100
1,700
300
500
800
1,500
300
500
800
1,100
1,700
800
1,500
Air Inlet: N.P.T. 1/4”
OVERALL
LENGTH
MM IN
298
295
359
322
320
320
360
322
320
229
229
249
249
10.7
10.7
14.2
13.0
12.8
12.8
14.2
13.0
12.8
WEIGHT
LB KG
2.1
2.0
2.0
2.4
1.5
1.5
2.4
2.1
2.0
8.2
8.2
9.8
9.8
1.2
1.2
1.5
1.5
0.5
0.5
0.7
0.7
Air Hose Size: 1/4” I.D. for all models
0.9
0.9
0.9
1.1
0.7
0.7
1.1
0.9
0.9
FROM CENTER
TO OUTSIDE
MM IN
36
36
35.5
38.5
36
36
35.5
35.5
32
15
15
17
17
1.5
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.3
0.6
0.6
0.7
0.7
Recommended Air Pressure: 85 psi
HEX BIT OR
DRIVE SIZE
IN
NOISE
LEVEL dB(A)
AIR
USAGE
CFM
1/4
1/4
3/4
1/4
1/4
1/4
1/4 Sq.
1/4 Sq.
1/4 Sq.
1/4
1/4
1/4
1/4
75
75
75
72
73
73
72
75
75
70
70
70
70
7.0
7.0
10.5
10.5
10.5
10.5
10.5
10.5
10.5
5.2
5.2
5.6
5.6
US-LT31PB Series US-LT41PB Series US-LT51PB Series US-LT60P Series
TORQUE CONTROL LIGHT TOUCH (LT) SERIES – PISTOL
MODEL
US-LT31PB-05
US-LT31PB-11
US-LT31PB-17
US-LT31PB-23
US-LT41PB-08
US-LT41PB-15
US-LT41PB-21
US-LT51PB-05
US-LT51PB-08
US-LT51PB-17
US-LT60P-03*
US-LT60P-07*
US-LT60P-11*
TORQUE RANGE
(SOFT JOINT)
NM IN-LB
2.4 - 5.0
1.1 - 2.1
0.7 - 1.5
0.4 - 1.0
1.6 - 4.0
1.0 - 2.2
1.0 - 1.7
5.0 - 10.5
44.0 - 92.4
3.0 - 5.5
1.5 - 2.6
7.0 - 20.0
61.6 - 176.0
4.0 - 10.0
35.2 - 88.0
4.0 - 7.0
21.1 - 44.0
9.7 - 18.5
6.2 - 13.2
3.5 - 8.8
14.0 - 35.2
8.8 - 19.4
8.8 - 15.0
26.4 - 48.4
13.2 - 22.9
35.2 - 61.6
FREE
SPEED
RPM
500
1,100
1,700
2,300
800
1,500
2,500
480
800
1,700
320
650
1,100
MM
OVERALL
LENGTH
IN
198
230
230
230
175
198
198
170
175
175
189
170
170
Air Hose Size: 1/4 I.D. for US-LT31PB & US-LT41PB Series Air Inlet: N.P.T. 1/4”
* Optional 3/8” Sq. Drive available for US-LT60P Series ADD (P) to Model Number
8.5
9.1
9.1
9.1
7.7
8.5
8.5
7.0
7.7
7.7
8.2
7.0
7.0
Recommended Air Pressure: 85 psi
LB
WEIGHT
KG
FROM CENTER
TO OUTSIDE
MM IN
2.6
3.7
3.7
3.7
1.9
2.6
2.6
1.6
1.9
1.9
1.9
1.6
1.6
0.9
0.7
0.7
0.7
0.9
0.9
0.9
1.2
1.2
1.2
1.7
1.7
1.7
16
16
16
16
17
17
17
20
20
20
22
22
22
3/8 I.D. for US-LT31PB-05, US-LT51PB Series & US-LT60P Series
0.8
0.9
0.9
0.9
0.6
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.6
NOISE
LEVEL dB(A)
75
75
76
77
74
74
75
70
70
70
70
70
70
AIR
USAGE
CFM
10.5
17.5
17.5
17.5
21.0
21.0
21.0
7.0
10.5
10.5
7.0
7.0
7.0
Visit our NEW website www.aimco-global.com
US & US-LD PNEUMATIC SCREWDRIVERS
US-LD40P-15
DIRECT DRIVE SERIES
MODEL
MAX TORQUE
SOFT JOINT HARD JOINT
NM FT-LB NM FT-LB
FREE
SPEED
RPM
PISTOL
US-LD40P-08
US-LD40P-15
US-LD40P-21
US-LD50P-05
US-LD50P-08
US-LD50P-17
4.8
3.0
2.0
10.0
6.5
3.5
3.6
2.2
1.5
7.4
4.8
2.6
5.7
3.2
2.8
11.2
7.8
5.9
4.2
2.4
2.1
8.3
5.8
4.4
940
1,700
2,500
500
900
1,900
130
130
130
153
153
150
OVERALL LENGTH
MM IN
US-LD50P-08
WEIGHT
LB KG
FROM CENTER TO OUTSIDE
MM IN
US-3.5ACB
Recommended Air Pressure: 72 psi
NOISE
LEVEL dB(A)
AIR
USAGE
CFM
5.1
5.1
5.1
6.0
6.0
5.9
1.5
0.7
1.5
0.7
1.5
0.7
2.0
0.9
2.0
0.9
2.0
0.9
17
20
17
17
20
20
0.7
0.7
0.7
0.8
0.8
0.8
74
74
70
70
75
75
14.0
14.0
14.0
17.5
17.5
17.5
ANGLE
US-3.5ACB
Air Hose Size: 1/4 I.D.
MAX TORQUE
SOFT JOINT
NM FT-LB
HARD JOINT
NM FT-LB
1.75
1.1
2.5
1.8
Air Inlet: N.P.T. 1/4
CAPACITY
(SCREW SIZE)
MM IN
4 No. 8
FREE
SPEED
RPM
2,000
OVERALL
LENGTH
MM IN
200 7.9
WEIGHT
LB KG
FROM CENTER
TO OUTSIDE
MM IN
1.4
0.7
10.0
0.4
NOISE
LEVEL dB(A)
85
AIR
USAGE
CFM
7.0
US-3.5B
CUSHION CLUTCH SERIES
CAPACITY
(SCREW SIZE) FREE SPEED
MODEL
US-3.5B
US-5
Air Hose Size: 1/4” I.D.
MM
4
5
IN
No. 8
No. 10
Air Inlet: N.P.T. 1/4”
RPM
2,000
1,400
MM
OVERALL
LENGTH
IN
214
236
8.5
7.1
WEIGHT LESS BIT
LB KG
1.4
2.4
0.6
1.1
FROM CENTER
TO OUTSIDE
MM IN
17
21
0.7
0.8
US-5
Recommended Air Pressure: 57 psi
NOISE
LEVEL dB(A)
AIR
USAGE
CFM
75
75
7.0
7.0
US-350PW
IMPACT SERIES
CAPACITY
(SCREW SIZE)
MM IN MODEL
PISTOL
US-350PW
US-450PW
US-652PW
STRAIGHT
US-6W
US-450WB
4
5
6
6
5
No. 8
No. 10
1/4
1/4
No. 10
FREE
SPEED
RPM
15,000
14,000
9,000
9,500
11,000
Air Hose Size: 1/4” I.D. Air Inlet: N.P.T. 1/4”
(R) Denotes Directional Muffled Rear Exhaust option
US-450PW
OVERALL LENGTH WEIGHT LESS BIT
MM IN LB KG
121
151
155
4.8
5.9
6.1
1.2
1.7
1.9
US-652PW
0.5
0.8
0.9
FROM CENTER
TO OUTSIDE
MM IN
17
17
23
0.7
0.7
0.9
Recommended Air Pressure: 85 psi
NOISE
LEVEL dB(A)
AIR
USAGE
CFM
81
79
79
US-450WB
7.0
7.0
12.4
187
161
7.4
6.3
1.8
1.2
0.8
0.6
22.5
18.5
0.9
0.7
85
80
10.5
7.0
Recommended air pressure: 57 psi for US-350PW, US-450PW, US-6W, and US-450WB / 72 psi for US-652PW.
NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368
Visit our NEW website www.aimco-global.com
SHUT-OFF IMPACT CORDLESS TOOLS
Tested and PROVEN to BEAT the competition in vibration and noise levels. These tools outperform the competition in number of rundowns per battery charge.
SHUT-OFF IMPACT TOOLS
The Signature Series Impact Shut-Off Pistol Tool can operate as a standard impact wrench or as an impact wrench with a programmable shut-off point, preventing over-torquing. These innovative tools deliver a torque range of 2–89 ft-lb (3–120 Nm).
No torque reaction, coupled with the ergonomic, lightweight design and reduced vibration, helps to prevent user injury.
FEATURES AND BENEFITS
• Brushless motor provides longer motor life and increased efficiency
• Easy-to-read process information lights
• Advanced shut-off system
• LED light for work-area illumination
• Programmable buttons for easy operation
• Li-Ion battery provides long battery life
• Mini USB port for connection to optional programmer (SPC-2PGM)
SIW-P5538
MODEL
TORQUE RANGE
NM FT-LB
MAX TORQUE
NM FT-LB
SIW-P2525Q
SIW-P3225Q
SIW-P3238
SIW-P5538
SIW-P5550
SIW-P10050
SIW-P12050
3 - 25
6 - 32
6 - 32
15 - 55
15 - 55
25 - 100
30 - 120
2 - 18
4 - 24
4 - 24
11 - 41
11 - 41
18 - 74
22 - 89
40
90
90
120
120
180
210
Shut-Off Impact Tools Include: Body Jacket, Bail, and one (1) 18V Li-Ion Battery
90
133
155
30
66
66
90
BATTERY AND CHARGER
The Signature Series Shut-Off Impact
Tool battery features a slim profile design and a slide mount connection to the tool, which ensures durability and makes changing out batteries quick and easy.
BATTERY MODEL #
SIW-B18LI
SIW-B1BLI-HC
CHARGER MODEL #
SIW-C18
VOLTAGE /
CAPACITY TYPE
18V, 2.0 Ah
18V, 4.0 Ah
Li-Ion
Li-ion
OUTPUT INPUT
18V-19.2V, 4.0 A 100-240VAC, 50-60 Hz
FREE SPEED
2,400
2,400
2,400
2,400
2,400
2,400
2,400
SIW-B18LI
SIW-C18
BATTERY
(V)
18
18
18
18
18
18
18
Visit our NEW website www.aimco-global.com
LB
WEIGHT
KG
2.4
2.4
2.9
2.2
2.2
2.2
2.4
1.1
1.1
1.3
1
1
1
1.1
ANVIL SIZE NOISE LEVEL dB(A)
1/4 QC
1/4 QC
3/8 Sq Dr
3/8 Sq Dr
1/2 Sq Dr
1/2 Sq Dr
1/2 Sq Dr
71
71
71
71
71
71
71
ACCESSORIES
MODEL # DESCRIPTION
BJ10091 Grey Body Jacket Cover
SIW-PBL Suspension Bail
SIW-38PR Pin Retainer Kit, 3/8” Drive
SIW-50PR Pin Retainer Kit, 1/2” Drive
BJ10091 SIW-PBL
PRECISION CLUTCH CORDLESS TOOLS
Quick shut-off, precision clutch minimizes torque reaction, ensuring precise application of torque.
PRECISION CLUTCH TOOLS
Signature Series precision clutch tools feature a quick-releasing clutch that delivers accuracy across multiple joint types. Constructed of precision machined parts, this tool guarantees accuracy and durability over the life of the tool.
FEATURES AND BENEFITS
• LED indicator provides simple process information to the operator.
The signal is visible from any angle
• Press button for easy F/R operation
• LED light for working in dark areas
• Trigger repeat protection avoids double hits on already seated screws
• Easily attached sliding battery system
• Mini USB port for connection to optional programmer (SPC-2PGM)
• Li-Ion battery pack delivers longer run time
• Ergonomic handle design provides outstanding balance and weight and is ideal for accessing hard-to-reach locations
• Angle tool enables multiple head positions
SPC-P2325Q
SPC-A21625
MODEL
Pistol Grip*
SPC-P2325Q
SPC-P2625Q
SPC-P2925Q
SPC-P21225Q
Right Angle Nutrunner**
SPC-A21025Q
SPC-A21025
SPC-A21038
SPC-A21625Q
SPC-A21625
SPC-A21638
SPC-A23038
SPC-A23538
SPC-A25038
SPC-A27038
TORQUE RANGE
NM FT-LB
.8 – 3
1 – 6
1.5 – 9
2 – 12
3 – 12
3 – 12
3 – 12
5 – 18
5 – 18
5 – 18
8 – 30
10 – 35
10 - 50
20 - 70
.6 – 2.2
.7 – 4.4
1.1 – 6.6
1.5 – 8.8
2.2 – 8.8
2.2 – 8.8
2.2 – 8.8
3.7 – 13.3
3.7 – 13.3
3.7 –1 3.3
5.9 – 22
7.4 – 25.8
7.4 – 37
14.8 – 51.7
FREE SPEED RPM RANGE
(PROGRAMMABLE WITH
PROGRAMMER ACCESSORY)
500 – 1,550
300 – 1,000
300 – 800
250 – 600
400 – 1,000
400 – 1,000
400 – 1,000
300 – 600
300 – 600
300 – 600
250 – 480
220 – 330
200 Non-Programmable Fixed Speed***
170 Non-Programmable Fixed Speed***
* Pistol Grip Tools include: Torque Adjustment Tool and one (1) 18V Li-Ion Battery
** Angle Nutrunners include: Torque Adjustment Tool, Head Indexing Spanner Wrench, and one (1) 18V Li-Ion Battery
*** High torque tools feature fixed RPM.
BATTERY
VOLTAGE
18V
18V
18V
18V
18V
18V
18V
18V
18V
18V
18V
18V
18V
18V
TOOL WEIGHT (W/O BATTERY)
LB KG
Visit our NEW website www.aimco-global.com
3.5
3.5
5.3
6.3
3.5
3.5
3.5
3.5
3.5
3.5
2.1
2.1
2.1
2.1
.95
.95
.95
.95
1.6
1.6
2.4
2.9
1.6
1.6
1.6
1.6
1.6
1.6
ANVIL
SIZE
1/4” hex
1/4” hex
1/4” hex
1/4” hex
1/4” hex
1/4” Sq
3/8” Sq
1/4” hex
1/4” Sq
3/8” Sq
3/8” Sq
3/8” Sq
3/8” Sq
3/8” Sq
PRECISION CLUTCH CORDLESS TOOL ACCESSORIES
BATTERY AND CHARGER
The AIMCO Signature Series
Precision Clutch Tool battery and charging system could not be more simple. One universal battery and charger interface with all of the Signature Series
Precision Clutch tools. Each tool utilizes the same lightweight 18V
Li-Ion battery, which provides superior battery life. The charger accepts input AC power of 100–
240VAC, making use simple anywhere in the world.
SPC-B218LI
BATTERY MODEL #
SPC-B218LI
SPC-B218LI-HC
CHARGER MODEL #
SPC-C218-19
VOLTAGE
18V
18V
OUTPUT
18V-19.2V
3.0 A
SPC-C218-19
TYPE
Li-Ion
Li-Ion
INPUT
100-240VAC
50-60 Hz
CAPACITY
2.0 Ah
4.0 Ah
DIMENSIONS
(W/O BATTERY)
6.25” deep x 5” wide x 3.5” tall
158.75 mm x 127 mm x 89 mm
WEIGHT
.8 Lb/.4 kg
1.4 Lb/.64 kg
WEIGHT
1.2 Lb/.54 kg
PRECISION CLUTCH TOOL ATTACHMENTS
A wide variety of special heads and attachments can be fitted to Signature Series Angle Nutrunners.
Contact your AIMCO representative for assistance,
1-503-254-6600, or toll free 1-800-852-1368.
Angle:
Square Drive
Angle:
Flush Socket
Offset
Straight
QUICK CLIP
The two piece Quick Clip comes with a belt clip and a stretch cord attachment for the Signature Series Precision Clutch pistol tool. The patented ball feature allows for quick and easy release.
SPC-QC
Open End
BODY JACKETS
Prevent damage to the workpiece.
MODEL
BJ10082
BJ10083
DESCRIPTION
Clear Body Jacket for
Signature Series Precision
Clutch Pistol Tools
Clear Body Jacket for
Signature Series Precision
Clutch Angle Nutrunners
Visit our NEW website www.aimco-global.com
CORDLESS TOOL ACCESSORIES
TOOL SPEED PROGRAMMER
Each Signature Series battery tool has programmable features that enhance operator efficiency. Programmable features include:
• Tool speed control from minimum (1,500 rpm) to maximum (2,400 rpm) speed in 50 rpm increments
• Forward/Reverse Mode - Three setting options
• Two-stage trigger delay control
• Screw count / impact count
• Supervisor level “lock-out” control
Additionally, the Signature Series battery tool has an integrated mini
USB connector that couples to the Signature Series Programmer module. Simply connect the tool to the Programmer Module and flash the tool to the desired RPM. The programmed RPM will remain until a change is desired.
SPC-2PGM
HOLSTERS
AIMCO offers right-hand and lefthand holsters for pistol and right angle tools.
SPC-P-HL-LH for Left Hand
SPC-P-HL-RH for Right Hand
Signature Series tools can be adapted to a wide range of application-specific configurations.
Contact your AIMCO Customer Service Associate for assistance, 1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
ELECTRIC SCREWDRIVERS
SERIES
• Available in push-to-start and lever start styles
• Ergonomic design — Lightweight, compact housings ensure operator comfort during operation
• Accurate torque control — Precise controlled fastening with automatic shut-off clutches
AE-5681
• External brush replacement — Virtually no down time for brush replacement
• UL Listed and CE Certified — Drivers meet electrical safety standards in both the U.S. and Europe
• Direct plug-in style — Offers easy and convenient start-up (certain models), simply plug it in
• External torque adjustment — Torque level can be easily adjusted by simply turning the external adjustment ring
• State-of-the-art motor design — Ensures comfortable grip temperature for operator and extended motor life
ELECTRA
®
SERIES
MODEL
TORQUE RANGE
IN-LB KGF-CM
FREE SPEED
RPM LB
WEIGHT
KG
PUSH-TO-START DIRECT PLUG-IN SERIES
AE-5681
(Includes torque cover)
3.5 - 15.6 4 - 18.0
AE-8681
(Includes pistol grip handle adapter)
15 - 45 23.0 - 51.8
LOW-VOLTAGE LEVER START SERIES (Requires External Power Supply)
AE-2020
AE-4020
AE-4520
.35 - 1.3
.9 - 5
1.3 - 8.7
.40 - 1.5
1.0 - 6.0
1.5 - 10.0
AE-7010
AE-8010
6.1 - 17.4
10.4 - 26.0
7.0 - 20.0
12.0 - 29.9
LOW-VOLTAGE PUSH-TO-START SERIES (Requires External Power Supply)
AE-7010PS
AE-8010PS
6.1 - 17.4
10.4 - 26.0
7.0 - 20.0
12.0 - 29.9
1,000
600
720
720
720
750
550
750
550
1.2
1.6
1.4
1.4
* 220V AC is available upon request. Contact AIMCO at 1-503-254-6600, or toll free 1-800-852-1368.
0.7
0.7
0.7
1.4
1.4
0.5
0.7
0.6
0.6
0.3
0.3
0.3
0.6
0.6
IN
LENGTH
MM
9.3
10.6
8.0
8.0
8.0
9.3
9.3
9.3
9.3
237
269
203
203
203
236
236
236
236
HEX DRIVE
IN MM
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
POWER
SOURCE
115V AC*
115V AC*
POWER SUPPLY:
required power supplies
2
POWER SUPPLY:
power supplies
2
ELECTRA
®
LOW ESD SERIES
• Grounded bit — Grounded chuck assembly routes any existing charge to ground
• Carbonized housing — Handle material and buttons are constructed of carbonized plastic throughout, enabling any charge received by the handle to be routed to ground
• Long-Lasting ESD resistant handle — Material will maintain its integrity for the life of the handle, unlike coatings or paints
AE-5681ESD
ELECTRA
®
LOW ESD SERIES
MODEL
AE-4520ESD*
AE-5681ESD
TORQUE RANGE
IN-LB KGF-CM
1.3 - 8.7
3.5 - 15.6
1.5 - 10.0
4 - 18.0
FREE SPEED
RPM
720
1,000
LB
0.9
1.2
WEIGHT
KG
* Low-voltage units require an external power supply.
** 220V AC is available upon request. Contact AIMCO at 1-503-254-6600, or toll free 1-800-852-1368.
0.4
0.5
IN
8.0
9.3
LENGTH
MM
204
237
IN
HEX DRIVE
MM
1/4
1/4
6.4
6.4
POWER
SOURCE
35V DC
115V AC**
Visit our NEW website www.aimco-global.com
ELECTRIC SCREWDRIVERS
ELECTRA
®
SLIP CLUTCH SERIES
• High-speed performance — For quick and consistent assembly and disassembly
• Maximum ergonomics and convenience — Offers a combination of a slip clutch with a high speed motor to provide low torque reaction; one of the best power-to-weight ratios in the industry
• Added maintenance feature — LED light indicates when to change brushes. Brush cap contains a switch that shuts off the power during brush replacement
• Direct 110V plug-in — Eliminates the need for an external power supply
• 1/4” hex quick change chuck for easy bit changes
• External torque collar for easy torque adjustment.
ELECTRA
®
SLIP CLUTCH SERIES
MODEL
AE-2015
RECOMMENDED TORQUE RANGE
IN-LB KGF-CM
4.3 - 21.7 5.0 - 25.0
FREE SPEED
RPM
1,000
LB
WEIGHT
KG
1.2
** 220V AC is available upon request. Contact AIMCO at 1-503-254-6600, or toll free 1-800-852-1368.
.55
IN
LENGTH
MM
9.2
234
AE-2015
IN
HEX DRIVE
MM
1/4 6.4
POWER
SOURCE
110 V / 120V AC*
PRECISION SERIES
For low torque applications
• Featuring ergonomic design
• Comes with options such as long-life brushless motors and adjustable speed power supplies
AE-6300
AE-6450
STANDARD MODELS
• Optional speed control power supply — Enables infinite control from 20% to 100% of maximum tool speed and adjustable soft start to minimize cross threading
• Ergonomic housing — Oval shape conforms to hand
• Duralite — Casing material provides a secure grip
• Integrated Lever — Feather touch integrated lever reduces travel and stress. Requires only 2 mm of travel to activate
• External torque control — Twist and go
PRECISION SERIES
TORQUE RANGE
IN-LB KGF-CM MODEL
STANDARD
AE-6300
AE-6450
HIGH SPEED
AE-6300S
AE-6450S
EXTENDED LIFE
AE-6300M
.85 - 5.0
1.3 - 8.7
.35 - 4.3
1.3 - 8.7
1.0 - 5.5
1.0 - 5.8
1.5 - 10.0
0.4 - 5.0
1.5 - 10.0
1.1 - 6.3
FREE SPEED
RPM
725
770
920
920
550
LB
0.9
0.9
0.9
0.9
0.9
EXTENDED LIFE MODELS
• Sealed Swiss motor — For higher duty cycles, longer life, and less maintenance. Sealed casing means no brush changes are necessary
• Extended warranty on tool motor — Three year standard motor warranty
• Compact power supply — Makes setup a breeze
WEIGHT
KG
0.4
0.4
0.4
0.4
0.4
IN
8.5
8.5
8.5
8.5
8.5
LENGTH
MM
216
216
216
216
216
HEX DRIVE
IN
1/4
1/4
1/4
1/4
1/4
Visit our NEW website www.aimco-global.com
ELECTRIC SCREWDRIVERS
AE-224PS
AE-278PS
APM-30
ELECTRA
®
SERIES ACCESSORIES – POWER SUPPLIES
MODEL
COMPATIBLE
SCREWDRIVERS
TOOL
RPM
VOLTAGE
CONVERSION
AE-224PS
AE-278PS
APM-30
AE-2020
AE-2020ESD
AE-4020
AE-4520
AE-4520ESD
AE-7010
AE-7010PS
AE-6300M
AE-6300
AE-6300S
AE-6450
AE-6450S
AE-8010
AE-8010PS
720
STANDARD
550
VARIABLE SPEED / SOFT START
110V AC - 220V AC / 30V DC
110V AC - 220V AC / 30V DC
DIMENSIONS
(LB)
2.6 x 1.6 x 5.0
66 x 41 x 127 mm
1.6 x 5.0 x 2.6
41 x 127 x 66 mm
2.1 x 3.4 x 1.9
53 x 87 x 48 mm
WEIGHT
(KG)
1.0 .45
1.0 .45
0.4 0.2
ANGLE HEAD
ATTACHMENTS
Available for lever start series.
PISTOL GRIP HANDLE
Converts to a pistol style driver for horizontal fastening.
Not available for Low
Available for Trigger
ESD Series.
Start only (included with
OPTIONAL ACCESSORIES
AE-8681).
ITEM MODEL
Angle Head Attachments
Pistol Grip Handle
Torque Cover
Fastener Counter
AE-2045A
AE-7080A
AE-PG7080
AE-TC2040
AE-TC7080
4H2055
AM-45
AM-65
TORQUE COVER
Prevents accidental torque adjustment by the operator (included with AE-5681).
FASTENER COUNTER
Verifies and error-proofs assembly process.
COMPATIBLE SCREWDRIVERS
For AE-2020, AE-4020, AE-4520
For AE-7010, AE-8010
For AE-7010, AE-7010PS, AE-8010, AE-8010PS
For AE-2020, AE-4020, AE-4520
For AE-7010, AE-7010PS, AE-8010, AE-8010PS
For AE-8681
For AE-2020, AE-4020, AE-4520 Standard and ESD types
For AE-7010, AE-7010PS, AE-8010 and AE-8010PS
Visit our NEW website www.aimco-global.com
IMPACT TOOLS
UW-SERIES IMPACT TOOLS
UW-Series impact tools offer fast, economical operation in high-volume heavy assembly applications.
UW-6SLRDK
UW-6SL(D)K
UW-6SLRK
UW-61ERK UW-8SHK
UW-8SHRK
TWIN HAMMER PISTOL IMPACT WRENCHES
MODEL
CAPACITY
MM IN
UW-6SLRDK
UW-6SLDK
UW-6SLK
UW-6SLRK
UW-61ERK
UW-8SHRK
UW-8SHK
UW-9SRK
UW-9SK
UW-10SHRK 12
UW-10SHK 12
8
8
10
10
UW-13SRK
UW-13SK
13
13
UW-131ERK 13
6
6
8
6
6
Air Hose Size: 3/8” I.D.
5/16
5/16
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/4
1/4
1/4
1/4
5/16
TORQUE RANGE
(APPROX)
NM FT-LB
6.9 - 18
6.9 - 18
7.8 - 19
7.8 - 19
14 - 40
18 - 40
29 - 69
35 - 87
35 - 87
47 - 170
49 - 180
88 - 250
88 - 250
84 - 260
5 - 13
5 - 13
6 - 14
6 - 14
10 - 30
13 - 30
21 - 51
26 - 64
26 - 64
35 - 125
36 - 133
65 - 184
65 - 184
62 - 192
SPEED
RPM
7,300
7,500
7,000
7,000
6,000
6,500
6,000
6,500
5,500
8,500
8,500
8,500
8,500
7,300
Air Inlet: N.P.T. 1/4”
UW-9SRK
UW-9SK
UW-10SHK
UW-10SHRK
UW-13SK
UW-13SRK
UW-131ERK
Recommended Air Pressure: 85 psi
OVERALL
LENGTH
MM IN
215
215
205
172
172
178
178
183
183
175
175
175
175
150
8.5
8.5
8.1
6.8
6.8
7.0
7.0
7.2
7.2
6.9
6.9
6.9
6.9
5.9
WEIGHT
KG LB
2.6
2.6
3.0
1.6
1.6
1.8
1.8
2.1
2.1
1.0
1.0
1.0
1.0
1.5
2.1
2.1
2.1
FROM CENTER
TO OUTSIDE
MM IN
31.0
31.0
31.0
2.1
31.0
3.3
29.5
3.4
31.0
3.4
31.0
3.9
34.0
4.0
34.0
4.7
30.5
4.7
35.0
5.7
37.5
5.7
37.5
6.5
37.5
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.3
1.3
1.4
1.4
1.5
1.5
1.5
SQ. DR. OR
HEX SIZE
IN
1/4 Hex
1/4 Hex
1/4 Sq.
1/4 Sq.
3/8 Sq.
1/2 Sq.
1/2 Sq.
1/2 Sq.
1/2 Sq.
1/2 Sq.
1/2 Sq.
1/2 Sq.
1/2 Sq.
1/2 Sq.
NOISE
LEVEL dB(A)
91
91
92
92
91
93
93
93
95
95
95
95
95
97
AVERAGE AIR
CONSUMPTION
NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
14.0
14.0
16.0
17.6
16.0
16.0
16.0
19.4
19.4
12.4
12.4
12.4
12.4
12.4
UW-6SSDK
UW-6SSLRDK
UW-6SSHDK
UW-6SSHK
UW-6SSHRDK
UW-6SSHRK
UW-9SSK
UW-13SSK
UW-401L
TWIN HAMMER INLINE IMPACT WRENCHES
Recommended Air Pressure: 85 psi
MODEL
CAPACITY
MM IN
TORQUE RANGE
(APPROX)
NM FT-LB
SPEED
RPM
UW-6SSDK
UW-6SSLK
UW-6SSRK
UW-6SSHDK
UW-6SSLRDK 6
6
8
6
6
1/4
1/4
1/4
5/16
1/4
7.8 - 22
7.8 - 20
9.8 - 26
15 - 30
6.9 - 18
6 - 16
6 - 15
7 - 19
11 - 22
5 - 13
UW-6SSHK 8
UW-6SSHRDK 8
UW-6SSHRK 8
UW-9SSK
UW-13SSK
UW-401
UW-401L
10
13
3/8
1/2
35 - 87
89 - 250
26 - 64
66 - 184
7,000
6,300
38 1-1/2 880 - 2,500 649 - 1,844 3,200
38
5/16
5/16
5/16
1-1/2
22 - 50
15 - 30
22 - 50
790 - 2,300
16 - 37
11 - 22
16 - 37
583 - 1,696
7,500
7,300
7,300
3,200
7,500
8,500
7.500
7,500
8,500
Air Hose Size: 3/8” I.D., 1/2” I.D. for UW-401 and UW-401L models Air Inlet: N.P.T. 1/4”
OVERALL
LENGTH
MM IN
290
281
494
205
249
249
654
185
197
225
205
239
WEIGHT
KG LB
FROM CENTER
TO OUTSIDE
MM IN
7.3
7.8
8.9
8.1
9.4
1.0
2.1
28.0
0.9
1.9
31.0
1.0
2.1
29.5
1.2
2.7
22.0
0.9
1.9
31.0
8.1
9.8
9.8
1.3
2.7
27.5
1.3
2.8
27.5
1.3
2.8
27.5
11.4
11.1
2.1
3.2
4.6
7.0
34.0
39.0
19.5
15.1
33.2
62.5
25.8
16.5
36.3
62.5
1.3
1.5
2.5
1.1
1.1
1.1
2.5
1.1
1.2
1.2
0.8
1.3
SQ. DR. OR
HEX SIZE
IN
1/4 Hex
3/8 Sq.
3/8 Sq.
1/4 Hex
1/4 Hex
1/4 Sq.
1/4 Hex
3/8 Sq.
1/2 Sq.
1/2 Sq.
1 Sq.
1 Sq,
NOISE
LEVEL dB(A)
95
97
110
92
91
91
110
91
90
91
91
91
NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
AVERAGE AIR
CONSUMPTION
12.4
12.4
12.4
16.0
19.4
42.4
42.4
10.5
10.5
10.5
12.4
10.5
IMPACT TOOLS MODEL NUMBER KEY UW-_SH = Pistol grip
UW-_SSH = Straight handle
UW-_CSH = Angle head
UW-_P = Pistol grip for 140 and 381 series
+
L = Long anvil +
R = Rear exhaust +
K = Lightweight
DK = Driver-type anvil, lightweight
Visit our NEW website www.aimco-global.com
IMPACT TOOLS
UW-6CSK
UW-6CSHK
UW-6CSHRK
TWIN HAMMER ANGLE IMPACT WRENCHES
MODEL
UW-6CSK
UW-6CSHK
UW-6CSHRK
UW-9CSK
UW-13CSK
Air Hose Size: 3/8” I.D.
10
13
8
8
CAPACITY
MM IN
6 1/4
5/16
5/16
3/8
1/2
TORQUE RANGE
(APPROX)
NM FT-LB
7.8 - 22 6 - 16
19 - 41
19 - 41
27 - 71
75 - 200
14 - 30
14 - 30
20 - 52
55 - 148
Air Inlet: N.P.T. 1/4”
SPEED
RPM
7,500
7,500
7,300
7,000
6,500
UW-9CSK UW-13CSK
Recommended Air Pressure: 85 psi
238
282
337
374
OVERALL
LENGTH
MM IN
218 8.6
9.4
11.1
13.3
14.7
WEIGHT
KG LB
FROM CENTER
TO OUTSIDE
MM IN
1.4
3.1
28.0
1.7
3.8
27.5
1.7
3.8
27.5
2.8
6.1
34.0
5.2
11.4
39.0
1.1
1.1
1.1
1.3
1.5
SQ. DR. OR
HEX SIZE
IN
3/8 Sq.
3/8 Sq.
3/8 Sq.
1/2 Sq.
1/2 Sq.
NOISE
LEVEL AVERAGE AIR dB(A) CONSUMPTION
94
94
94
95
97
10.5
12.4
10.5
12.4
26.5
NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
UW-140P(WR)
UW-220P
UW-220PL
UW-251P
UW-381
UW-381L
UW-381P
SWING HAMMER IMPACT WRENCHES
Recommended Air Pressure: 85 psi
MODEL
CAPACITY
MM IN
TORQUE RANGE
(APPROX)
NM FT-LB
SPEED
RPM
UW-140P(WR) 12 1/2
UW-220P 19 3/4
70 - 210
300 - 700
UW-220PL
UW-251P
19
25
3/4
1
300 - 700
600 - 1,000
52 - 155
221 - 516
221 - 516
443 - 738
UW-381
UW-381L
UW-381P
38 1-1/2 760 - 2,000 561 - 1,475 4,700
38 1-1/2 1,400 - 2,000 1,033 - 1,475 4,700
38 1-1/2 760 - 2,000 561 - 1,475 4,700
6,500
5,500
5,500
5,500
OVERALL
LENGTH
MM IN
WEIGHT
KG LB
FROM CENTER
TO OUTSIDE
MM IN
200
230
350
276
7.9
9.1
13.8
10.9
2.7
2.8
4.4
8.0
5.9
9.6
10.3
17.6
33.0
42.0
42.0
55.0
395 115.6
9.5
20.9
58.5
543 21.4
10.0
20.9
58.5
276 10.9
10.0
20.9
58.5
1.3
1.7
1.7
2.0
2.3
2.3
2.3
SQ. DR. OR
HEX SIZE
IN
1/2 Sq.
3/4 Sq.
3/4 Sq.
1 Sq.
1 Sq.
1 Sq.
1 Sq.
NOISE
LEVEL dB(A)
93
95
95
95
100
100
99
AVERAGE AIR
CONSUMPTION
25.0
25.0
25.0
28.0
31.5
31.5
31.5
Air Hose Size: 3/8” for UW-140P(WR) 1/2” I.D. for other models
Air Inlet:
NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
N.P.T. 1/4” for UW-140P(WR) N.P.T. 3/8” for UW-220P and UW-251P series N.P.T. 1/2” for UW-381 series
TWIN HAMMER JUMBO IMPACT WRENCHES
MODEL
UW-550
UW-75S
CAPACITY
MM IN
Air Hose Size: 3/4” I.D.
TORQUE RANGE
(APPROX)
NM FT-LB
SPEED
RPM
55 2-1/4 2,500 - 5,800 1,844 - 4,278
76 3 7,800 - 17,000 5,753 - 12,539
3,500
1,400
Air Inlet: N.P.T. 1”
UW-550
UW-75S
Recommended Air Pressure: 85 psi
OVERALL
LENGTH
MM IN
WEIGHT
KG LB
FROM CENTER
TO OUTSIDE
MM IN
525 20.7
36.0
79.0
78.0
670 26.4
56.0
123.0
96.0
3.1
3.8
SQ. DR. OR
HEX SIZE
IN
1-1/2 Sq.
1-1/2 Sq.
NOISE
LEVEL dB(A)
112
112
AVERAGE AIR
CONSUMPTION
79.0
114.0
NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
STUD BOLT WRENCH
Recommended Air Pressure: 85 psi
MODEL
CAPACITY
MM IN
TORQUE RANGE
(APPROX)
NM FT-LB
SPEED
RPM
OVERALL
LENGTH WEIGHT
MM IN KG LB
FROM CENTER
TO OUTSIDE
MM IN
UW-ST6SHK 8 5/16 22 - 49 16 - 36 6,500 170 6.7
1.7
3.7
24.0
1.0
SQ.
DR.
IN
3/8 Sq.
NOISE
LEVEL AVERAGE AIR dB(A) CONSUMPTION
92 14.0
Air Hose Size: 3/8” I.D. Air Inlet: N.P.T. 1/4” NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
UW-ST6SHK
Visit our NEW website www.aimco-global.com
UAG Series
GRINDERS
ANGLE GRINDERS
MODEL*
UAG-40SBL-136
UAG-50SBL-109
UAG-50SBL-120
UAG-70SBL-76
UAG-90SBL-59
CAPACITY
(WHEEL SIZE)
IN
4
5
5
7
9
SPEED
RPM
13,600
10,900
12,000
7,600
5,900
UAG-40SBL-136
RATED
HORSEPOWER
HP
1.0
1.0
1.0
2.0
2.5
UAG-50SBL-109
UAG-50SBL-120
OVERALL
LENGTH
MM IN
246
246
246
300
308
9.7
9.7
9.7
11.8
12.1
UAG-70SBL-76
OVERALL
HEIGHT
MM IN
76
76
76
98
98
3.0
3.0
3.0
3.9
3.9
WEIGHT
KG LB
1.3
1.4
1.4
2.9
3.3
2.9
3.1
3.1
6.4
7.3
UAG-90SBL-59
Recommended Air Pressure: 85 psi
NOISE
LEVEL dB(A)
84
82
82
83
88
AVERAGE AIR
CONSUMPTION
CFM
34.0
34.0
34.0
57.0
67.0
UG-25NA UG-38N UG-38NA
UG-38NL
UG-38NS
DIE GRINDERS
MODEL*
UG-25NA
UG-38N
UG-38NA
UG-38NL
UG-38NS
UG-50S-200
UG-45H
UG-60S-29*
COLLET
CHUCK SIZE
IN
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
* UG-60S-29 includes spanner wrench to tighten collet
SPEED
RPM
23,500
25,000
22,000
21,000
25,000
23,000
18,000
2,900
MINI ANGLE DIE GRINDERS
MODEL*
UG-20A-200
UG-20A-120
UG-50S-200A
COLLET
CHUCK SIZE
IN
1/4
1/4
1/4
SPEED
RPM
20,000
12,000
20,000
RATED
HORSEPOWER
HP
0.2
0.2
0.3
RATED
HORSEPOWER
HP
0.4
0.3
0.5
0.5
0.3
0.4
0.4
0.4
OVERALL LENGTH
MM
174
198
196
227
153
164
165
317
IN
6.8
7.8
7.7
8.9
6.0
6.5
6.5
12.5
KG
0.6
0.6
0.8
1.1
0.5
0.6
0.7
0.9
WEIGHT
LB
1.3
1.3
1.8
2.3
1.2
1.3
1.4
2.0
Recommended Air Pressure: 85 psi
OVERALL OVERALL NOISE
LENGTH
MM
HEIGHT WEIGHT LEVEL
IN MM IN KG LB dB(A)
131 5.2
80 3.2
0.5
1.1
75
131 5.2
80 3.2
0.5
1.1
76
195 7.7
87 3.4
0.9
2.0
75
AVERAGE AIR
CONSUMPTION
CFM
10.7
10.7
14.0
UG-50S-200
UG-60S-29
UG-45H
Recommended Air Pressure: 85 psi
NOISE LEVEL dB(A)
85
73
76
77
82
85
75
85
AVERAGE AIR
CONSUMPTION
CFM
10.7
14.0
22.0
18.0
10.7
10.7
14.0
10.7
UG-20A-120
UG-20A-200
UG-50S-200A
LIGHTWEIGHT GRINDERS
MODEL*
UG-65EB
UG-65EBL
UG-650EL
CAPACITY
(WHEEL SIZE)
IN
2.5
2.5
2.5
SPEED
RPM
14,600
14,600
14,600
UG-65EB
RATED
HORSEPOWER
HP
0.6
0.6
0.6
OVERALL LENGTH
MM IN
242
272
420
9.8
10.7
16.5
UG-65EBL
WEIGHT
KG LB
1.3
1.4
1.6
2.8
3.1
3.4
NOISE LEVEL dB(A)
95
95
85
UG-650EL
Recommended Air Pressure: 85 psi
AVERAGE AIR
CONSUMPTION
CFM
22.0
22.0
22.0
HORIZONTAL GRINDER
MODEL
UG-1250L-72
CAPACITY
(WHEEL SIZE)
IN
5
SPEED
RPM
7,200
*Air Hose Size: 3/8” I.D. – 1/2” I.D. (UG-1250L-72)
RATED
HORSEPOWER
HP
1.0
OVERALL
LENGTH
MM IN
436 17.2
WEIGHT
KG LB
2.8
6.2
Air Inlet: N.P.T. 1/4” - N.P.T. 3/8” (
UAG-90SBL-59 and
UG-1250L-72)
Recommended Air Pressure: 85 psi
NOISE
LEVEL dB(A)
88
AVERAGE AIR
CONSUMPTION
CFM
32.7
UG-1250L-72
NOTE: Additional models available.
Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
SANDERS AND DRILLS
SANDER
MODEL
CAPACITY
(WHEEL SIZE)
IN
UP-25DB 5
Air Hose Size: 3/8” I.D.
Recommended Air Pressure: 85 psi
SPEED
RPM
10,000
RATED
HORSEPOWER
HP
0.3
OVERALL
LENGTH
MM IN
WEIGHT
KG LB
212 8.3
1.7
3.7
NOISE
LEVEL dB(A)
73
AVERAGE AIR
CONSUMPTION
CFM
7.0
Air Inlet: N.P.T. 1/4” NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
UP-25DB
UD-50-22
UD-50-200
UD-50-45
UD-60-04
UD-60-07
UD-60-15
UD-60-20
UD-60-29
UD-80-04
UD-80-07
UD-80-12
UD-50S-22
UD-50S-45
UD-60S-15
UD-60S-29
UD-50S-45A
UD-50S-45A*
UD-60S-15C
UD-60S-29C
DRILLS
CAPACITY
MM IN MODEL
PISTOL
UD-50-200 3
UD-50-45
UD-50-22
UD-60-29
UD-60-20
UD-60-15
UD-60-07
UD-60-04
UD-80-12
UD-80-07
UD-80-04
INLINE
UD-50S-45
UD-50S-22
UD-60S-29
UD-60S-15
ANGLE
UD-50S-45A 4
UD-50S-45A* 4
UD-60S-29C 8
UD-60S-15C 8
6
8
8
8
13
13
8
8
6
8
8
13
13
16
1/4
5/16
5/16
5/16
1/8
1/4
5/16
5/16
5/16
5/16
1/2
1/2
1/2
1/2
5/8
#8
#8
5/16
5/16
SPEED
RPM
23,000
5,000
2,200
2,900
2,000
1,600
700
500
1,200
700
400
5,000
2,200
2,900
1,600
5,000
5,000
2,900
1,600
OVERALL
LENGTH
MM IN
135
180
180
219
220
145
140
167
216
239
247
210
205
227
238
253
253
276
283
5.3
7.1
7.1
8.6
8.6
5.7
5.5
6.6
8.5
9.4
9.7
8.3
8.1
8.9
9.4
10
10
10.9
11.1
WEIGHT WITH
CHUCK
KG LB
0.7
1.2
1.2
1.4
1.4
0.9
0.9
1.1
1.8
2.3
2.9
0.9
0.8
1.1
1.2
0.9
0.9
1.5
1.6
1.5
2.6
2.6
3.1
3.1
1.9
2.0
2.4
4.0
5.1
6.4
1.9
1.8
2.3
2.5
1.98
1.98
3.3
3.5
FROM CENTER TO
OUTSIDE
MM IN
21.0
21.0
21.0
22.5
22.5
22.5
22.5
22.5
26.0
26.0
26.0
21.0
21.0
22.5
22.5
21.0
21.0
22.5
22.5
0.8
0.9
0.9
0.9
0.9
0.8
0.8
0.9
1.0
1.0
1.0
0.8
0.8
0.9
0.9
0.8
0.8
0.9
0.9
NOMINAL
CHUCK SIZE
IN
5/16
5/16
5/16
5/16
5/16
5/16
1/2
1/2
1/2
1/2
5/8
5/16
5/16
5/16
5/16
–
–
5/16
5/16
TYPE OF
SPINDLE
IN-THR’D
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
1/4-28UNF
1/4-28UNF
3/8-24UNF
3/8-24UNF
* UD-50S-45A* comes with a cone jaw chuck installed.
Air Hose Size: 3/8” I.D. Air Inlet: N.P.T. 1/4” NOTE: Other models are available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
5/8-16UNF
Recommended Air Pressure: 85 psi
NOISE
LEVEL dB(A)
AVERAGE AIR
CONSUMPTION
CFM
73
77
76
75
75
72
72
77
79
79
79
79
79
79
79
77
77
77
77
14
14
18
18
14
14
18
18
14
18
18
18
18
14
14
18
23
23
23
Visit our NEW website www.aimco-global.com
PERCUSSION TOOLS
SBH-0
BRH-5U(R,H)
SBH-1A(R,H)
BRH-1U(R,H)
BRH-5US(R,H)
BRH-1US(R,H)
BRH-1UG(R,H)
Low-Vibration Type
BRH-5UG(R,H)
RIVETING HAMMERS
MODEL
SBH-0
SBH-1A(R,H)*
BRH-1U(R,H)
BRH-1US(R,H)
CAPACITY
DURALUMIN STEEL
IN IN
3/32
7/64
—
—
1/8
1/8
3/32
3/32
BRH-1UG(R,H)
BRH-5U(R,H)*
BRH-5US(R,H)
1/8
1/4
1/4
3/32
3/16
3/16
2,800
1,800
1,800
BRH-5UG(R,H)
BRH-7(R,H)*
1/4
-
3/16
-
VIBRATION-PROOF TYPE (Vibration total value < 2.5 m/s
2
)
1,800
3,400
BRH-1UD(R,H)
BRH-5UD(R,H)
#5
1/4
#3
#10
2,800
2,800
BLOW
PER MIN.
BPM
6,500
4,000
2,800
2,800
Air Hose Size: 3/8” I.D. Air Inlet: N.P.T. 1/4”
BRH-7(R,H)
187
189
246
258
168
OVERALL
LENGTH
MM IN
123
209
4.8
8.2
122
180
4.9
7.1
7.4
7.4
9.7
10.2
6.6
1.8
1.4
1.5
2.1
1.6
WEIGHT
KG LB
0.3
0.9
0.7
1.9
1.1
1.0
2.4
2.2
3.9
3.1
3.2
4.7
3.6
143
211
5.6
10.7
1.4
1.7
3.1
3.6
* R - Round Bushing H - Hex Bushing
BRH-1UD(R,H)
14.3
12.7
12.7
12.7
19.1
PISTON
DIAMETER
MM IN
10.0
11.1
0.4
0.4
14.3
14.3
0.6
0.6
0.6
0.5
0.5
0.5
0.8
14.3
12.7
0.6
0.6
BRH-5UD(R,H)
38
100
100
100
50
PISTON
STROKE
MM IN
23
56
0.9
2.2
38
38
1.5
1.5
1.5
4.0
4.0
4.0
2.0
Recommended Air Pressure: 85 psi
95
95
95
95
100
NOISE AVERAGE AIR
LEVEL CONSUMPTION dB(A) CFM
90
92
3.5
5.0
95
95
12.0
12.0
12.0
13.0
13.0
13.0
17.0
38
100
1.5
1.5
95
95
12.0
12.0
RH-25
RH-80
RH-90
CB-13P
RH-100Z
ONE SHOT HAMMERS
MODEL
CB-13P
RH-25
RH-80
RH-90
RH-100Z
RH-200
BLOW POWER
LB
1.7
20.4
27.6
103
78.1
139
RIVET SET
DIA X LENGTH
IN
4.04 x 9.86
—
—
—
—
—
Air Hose Size: 3/8” I.D. Air Inlet: N.P.T. 1/4”
SHANK DIAMETER
MM IN
—
10.2
10.2
10.2
10.2
10.2
—
0.401
0.401
0.401
0.401
0.401
RH-200
MM
STROKE
3.0
29.8
29.8
29.8
29.8
39.8
IN
0.12
1.2
1.2
1.2
1.2
1.2
MM
LENGTH
185
213
254
328
328
341
IN
7.3
8.4
10.0
12.9
12.9
13.4
Recommended Air Pressure: 85 psi
LB
0.7
2.0
2.9
3.5
3.9
4.6
WEIGHT
KG
0.3
0.9
0.3
1.6
1.8
2.1
NOTE: Additional models available. Please contact AIMCO, 1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
SCREW PRESENTERS: OVERVIEW
For semi-automated assembly, look no further — AIMCO’s Acra-Feed screw presenters provide:
PRODUCTIVITY
• One hand operation eliminates manual handling of screws
• Screw is presented to operator for easy magnetic or vacuum pickup
• Keeps workspace clear of dropped fasteners
• Quick feed rate from oscillating hopper design — up to two (2) screws per second
• Large hopper holds approximately 1,000 — 1,500 fasteners
• Solid design — no tie downs or straps required
FLEXIBILITY
• Perfect for contract or dedicated assembly
• Switch rails in minutes for different screw sizes
Acra-Feed
®
Screw Presenter
ERGONOMICS
• Allows for fewer arm and hand movements
RELIABILITY
• Heavy duty industrial design
• Modular design for easy repairs
QUALITY
• Uses existing or our new torque control drivers
• Keeps stray fasteners from getting into assemblies
FASTENING IN 3 EASY STEPS
1
Load screws into the hopper.
There is no side to load unit and no gates to limit capacity.
2
Address screw with magnetized bit.
Visit our NEW website www.aimco-global.com
3
Bring screw to workpiece and fasten parts.
A-50 SCREW PRESENTERS
A-50B-1
Standard Screw Presenter
A-50BRBT-1
Robotic Screw
Presenter
A-50BRBTC-4
Compact Robotic
Screw Presenter
STANDARD SCREW PRESENTERS
ADDITIONAL RAIL SCREW SIZE MAX SCREW LENGTH
MODEL
A-50A-0
A-50A-1.7
A-50B-1
A-50B-2
A-50B-3
A-50B-4
A-50C-6
PART NO.
AR-0
AR-1.7
BR-1
BR-2
BR-3
BR-4
CR-6
A-50C-8 CR-8 #6-8
A-50C-10 CR-10 #10
Dimensions: 5.1 (W) x 8.5 (L) x 5.3 (H) Weight: 7.0 lb.
IN
#0
—
#1
#2
#3
#4
#6
3.0
3.5
4.0
5.0
MM
1.4
1.7
2.0
2.3
2.6
.75
.75
.75
.75
IN
.39
.39
.75
.75
.75
18
18
18
18
MM
10
10
18
18
18
COMPACT ROBOTIC SCREW PRESENTERS
ADDITIONAL
RAIL
NOMINAL
SCREW SIZE
MAX SCREW
LENGTH
MODEL
A-50ARBTC-0
A-50ARBTC-1.7
A-50BRBTC-1
A-50BRBTC-2
A-50BRBTC-3
A-50BRBTC-4
A-50CRBTC-6
A-50CRBTC-8
PART NO.
AR-RBTC-0
AR-RBTC-1.7
BR-RBTC-1
BR-RBTC-2
BR-RBTC-3
BR-RBTC-4
CR-RBTC-6
CR-RBTC-8
A-50CRBTC-10 CR-RBTC-10 #10
Dimensions: 7.2 (L) x 4.9 (W) x 5.7 (H) Weight: 6.7 lb.
#2
#3
#4
#6
#6-8
IN
#0
—
#1
MM
1.4
1.7
2.0
2.3
2.6
3.0
3.5
4.0
5.0
IN
.390
.390
.700
.700
.700
.700
.700
.700
.700
MM
10
10
18
18
18
18
18
18
18
OPTIONAL ACCESSORIES
MODEL PART NO.
Mag-O-Net Bit Magnetizer AM1/4Z, AM5Z, AM3/16Z
ROBOTIC SCREW PRESENTERS
ADDITIONAL RAIL SCREW SIZE MAX SCREW LENGTH
MODEL
A-50ARBT-0
A-50ARBT-1.7
A-50BRBT-1
A-50BRBT-2
A-50BRBT-3
A-50BRBT-4
A-50CRBT-6
A-50CRBT-8
PART NO.
AR-RBT-0
AR-RBT-1.7
BR-RBT-1
BR-RBT-2
BR-RBT-3
BR-RBT-4
CR-RBT-6
CR-RBT-8
IN
#0
-
#1
#2
#3
#4
2.6
3.0
#6 3.5
#6-8 4.0
MM
1.4
1.7
2.0
2.3
A-50CRBT-10 CR-RBT-10 #10 5.0
Dimensions: 5.1” (W) x 10.8” (L) x 5.3” (H) Weight: 9.2 lb.
IN
.39
.39
.70
.70
.70
.70
.70
.70
.70
MM
10
10
18
18
18
18
18
18
18
WHICH TO USE…?
Standard Screw Presenters
For manual assembly stations where the operator must otherwise pick up and hold fasteners by hand.
Robotic Screw Presenters
For automated fastening systems or manual systems using vacuum assist to pick up nonferrous fasteners.
Compact Robotic Screw Presenters
For automated systems, or manual systems, using vacuum-assist to pick up nonferrous fasteners when work space is limited,
Visit our NEW website www.aimco-global.com
ACRA-FEED AUTOMATIC SCREW FEED SYSTEMS
Reduces Cycle Time By Approximately Two Seconds Per Fastener
FEATURES AND BENEFITS
• Delivers fastener directly to the driver
• For #2 - #10 fasteners, up to 1 inch long
• Available for captive washer type screws (A-315V)
• Feed speed of up to 1 screw per second
• System includes feeder, hose assembly, air screwdriver, and FRL
PRODUCTIVE
• Eliminates reaching for fasteners
• Most jams are easily cleared on the line
• Frees operator’s hand for productive use
• Large hopper holds between 1,000 – 5,000 fasteners
A-2100
ERGONOMIC
• Eliminates manual handling of fasteners and shavings
• Reduces workspace clutter
• Keeps workspace clean of dropped fasteners
• Torque reaction of standard driver is minimal and can be eliminated with optional Ergo-Arm
A-315V
RELIABLE
• Longest warranty in the industry — 3 years
• Rocking Bar design only operates as needed
• “Photo eyes” maximize motor life
• Design eliminates burrs and shavings by minimal handling of the fastener
• Durable head assembly lasts for years
• There are more Acra-Feed systems in use than any other system
MODEL
A-2100 Series
A-315V Series
* Dependent on screw size
Delivery Hose: 10 ft
APPLICABLE
SCREWS
M2-M5 (#2 - #10)
M2-M5 (#2 - #10)
Air Pressure: 85 psi
SCREW LENGTH
IN
1/4-1
1/4-1
MM
6-25
6-25
HOPPER CAPACITY
1,500cc (1,000-5,000 pcs)*
450cc (500-2,500 pcs)*
MAX FASTENING SPEED
60 screws/min*
60 screws/min*
WEIGHT (LB)
68
74
Power: AC 110V, 20W, AC 220V by request. Contact AIMCO at 1-503-254-6600, or toll free 1-800-852-1368.
DIMENSIONS
L X W X H (IN)
7 x 17 x 16
10 x 21 x 16
HOW TO ORDER: Acra-Feed systems are application-specific and configured to the unique workpiece and requirements of the user. Quotations are provided from a review of sample workpieces, 25 fasteners, and required torque specifications.
Visit our NEW website www.aimco-global.com
GRAVITY-DEFYING BALANCERS
TW-SERIES BALANCERS
TW-0 & TW-00
Series
TW-0 and TW-00
• Gravity defying / “true balance”
• No tension buildup to cause worker fatigue
• Easy external direct drive tensioning
• 360 degree upper swivel
• Safety cable provision
• Tool clip included
MODEL
TW-00
TW-0
TW-3
TW-5
TW-9
TW-15
TW-22
TW-30
TW-40
TW-50
TW-60
TW-70
CAPACITY
LB
1.1 - 3.3
1.1 - 3.3
KG
0.5 - 1.5
0.5 - 1.5
2.2 - 6.6
5.5 - 11.0
9.9 - 19.8
19.8 - 33.0
33.0 - 48.4
1.0 - 3.0
2.5 - 5.0
4.5 - 9.0
9.0 - 15.0
15 - 22
48.4 - 66.0
66.0 - 88.0
88.0 - 110.0
110.0 - 132.0
132.0 - 154.0
22 - 30
30 - 40
40 - 50
50 - 60
60 - 70
ANTI-GRAVITY
CAPACITY (LB)
2.5 - 3.0
2.5 - 3.0
4.5 - 6.0
8.0 - 10.5
15.0 - 19.0
26.0 - 32.5
41.0 - 48.0
CABLE
18” stranded steel cable 1/8 dia.
3.3-ft stranded steel cable 1/8” dia..
4.3-ft stranded steel cable 5/32” dia.
4.3-ft stranded steel cable 5/32” dia.
4.3-ft stranded steel cable 5/32” dia.
4.3-ft stranded steel cable 5/32” dia.
5-ft stranded steel cable 3/16” dia.
58.0 - 65.5
77.5 - 87.5
5-ft stranded steel cable 3/16” dia.
5-ft stranded steel cable 3/16” dia.
100.0 - 109.5
5-ft stranded steel cable 3/16” dia.
122.0 - 131.0
5-ft stranded steel cable 3/16” dia.
144.0 - 153.0
5-ft stranded steel cable 3/16” dia.
TW-3 through TW-70
• Tapered drum allows
“true balance” throughout cable travel
• Easy external direct drive tensioning
• Cast aluminum casing for durability
TW-3 to TW-70 Series
• Permanent lubrication
• 360 degree top swivel
• Enclosed spiral spring for added safety
• Safety chain provision (TW-3 through
TW-15 models)
• Automatic safety lock plus manual drum lock (TW-22 through TW-70)
ASB-SERIES BALANCERS
• Built-in Safety Features: The cable, drum, and enclosed spring are fully visible without opening the unit for easy and convenient safety checks. The sturdy spiral spring is enclosed for greater control and safety
• Ergonomic Spring Release: The automatic safety lock provides extra control
• Extended Cable Length: Stainless steel cables allow for extended reach on applications
• Enhanced Gear Mechanism: Allows for more exact adjustment of tension
• No Recoil and Low Resistance: Tapered drum style provides gravity defying tool positioning and low travel
ASB-OC Gravity
Defying and Hand
Adjustable Balancer
MODEL
ASB-0C
ASB-3C
ASB-5C
1.1 - 3.3 lb
3.3 - 6.6 lb
5.5 - 11 lb
CAPACITY
0.5 - 1.5 kg
1.5 - 3 kg
2.5 - 5 kg
51.1 in
86.4 in
86.4 in
STROKE
130 cm
220 cm
220 cm
ASB-3C
ASB-5C
1.5 lb
3.0 lb
3.4 lb
WEIGHT
0.7 kg
1.4 kg
1.5 kg
Visit our NEW website www.aimco-global.com
LINE REEL BALANCERS / RETRACTORS
LINE REEL BALANCERS
LR-Series
• Designed for light duty applications with small pneumatic tools
• Integrating air hose and support cable keep work areas clean
• Adjustable ball stop for optional positioning
• 1/4” I.D. polyvinyl hose with 1/4” NPT inlet
• 360 degree upper swivel
• Maximum 142 PSI
LR-09B-90/200
RETRACTORS
RPA Series
• No tools needed to set tension
• 5 ft nylon coated steel cable
• Reinforced hanging bracket includes safety cable provision
• Adjustable cable stop
• Three (3) models support weight 0.5 – 5 lb
• Tool clip included
RMA-L Series
• Steel housing with polyester finish
• Reinforced hanging bracket includes safety cable provision
• 8 ft of 3/32” diameter coated steel cable
• Permanently lubricated
• Tool clip included
• External tension adjustment
• Ratchet cable lock
MODEL
RPA-1
RPA-2
RPA-3
RMA-7L
RMA-15L
RMA-20L
* With ratchet lock
0.5 - 1.5 lb
1.5 - 3.0 lb
3.0 - 5.0 lb
5 - 10 lb*
10 - 15 lb*
15 - 23 lb*
CAPACITY
0.2 - 0.7 kg
0.7 - 1.4 kg
1.4 - 2.3 kg
2.3 - 4.8 kg*
4.5 - 6.8 kg*
6.8 - 10.4 kg*
RMA-L Series
MODEL HOSE LENGTH
LR-09B-90 35.5 in 90 cm
LR-09B-200 78.3 in 199 cm
CAPACITY
3 lb
3 lb
1.5 kg
1.5 kg
RPA Series
Visit our NEW website www.aimco-global.com
ERGO-ARM TOOL SUPPORT SYSTEMS
FEATURES AND BENEFITS
• Ergonomic support for electric and pneumatic tools reduces operator fatigue
• Increases productivity, consistency, and accuracy
AD-D1098-PAC
AD-D1098-SAC
PARALLEL ARM SERIES
AD-D1098-P, AD-D1098-PAC, AD-D1098-PACE
• Minimizes operator control
• Vertical adjustment eliminates cross-threading
• Fixtured tool increases repeatability
• Adjustable reach
• Available in air or oil cylinder models
• Electric tool mount standard on PACE model
MODEL
AIR CYLINDER SERIES
AD-D1098-SAC
AD-D1098-PAC
ARM STYLE
Single
Parallel
Parallel
TOOL MOUNT
Air manifold
Air manifold
Electric AD-D1098-PACE
OIL CYLINDER SERIES
AD-D1098-S
AD-D1098-P
Single
Parallel
Air manifold**
Air manifold
* Max torque allowed may be dependent on tool clutch type and joint rate
** For single arm electric tool mount, order EAP-202ED-KIT
IN
REACH
MM
4 - 33
4 - 33
4 - 33
4 - 33
4 - 33
102 - 838
102 - 838
102 - 838
102 - 838
102 - 838
SINGLE ARM SERIES
AD-D1098-S, AD-D1098-SAC
• Full tool rotation
• Operator control
• Adjustable reach
• Compatible with automatic screw feeder
• Available in air or oil cylinder models
LB
CAPACITY
KG
0 - 15
0 - 15
0 - 15
0 - 15
0 - 15
0 - 7
0 - 7
0 - 7
0 - 7
0 - 7
MAXIMUM TORQUE*
IN-LB NM
110
110
110
110
110
12
12
12
12
12
SPECIAL FEATURES
OF CLASSIC STYLE ERGO-ARM
Air regulator offers precision adjustment of resistance for perfect balance
Dual ball bearing joint construction for smoother movement and long life
Visit our NEW website www.aimco-global.com
Unique upper rail adjustment allows true vertical approach to any fastener – no crossthreading
ERGO-ARM ACCESSORIES AND LINEAR ARM
ERGO-ARM ACCESSORIES
• End-of-Arm Tooling options for the Ergo-
Arm allow you to choose the style right for your application
• Tool holders permit the tool to swivel, rotate, swing, or twist. Heavy duty construction can lock out any single, or combination of rotating, actions allowing only the motions required by your application
• End-of-Arm Tooling Brackets are simple to use. One Ergo-Arm can be used for more than one application
FOR USE WITH MODELS
AD-D1098-S/SAC
EAP-202ED-KIT
Electric Driver Tool
Mount Kit
FOR USE WITH MODELS
AD-D1098-P/PAC
EAP-203-ASSY
Air Manifold
Tool Mount Kit
(Standard on parallel units)
EAP-202ASSY
Driver Tool
Mount
LINEAR ARM
• Smooth movement and perfect balance while limiting operator control
• Machined stainless steel and ball bearing construction
• Two high quality tool balancers are included with each arm to provide a wide range of adjustment
MODEL DESCRIPTION
LQ-0002 Linear Arm
LQ-0004 Linear Arm
LQ-0024H Heavy Duty Arm
MAX. REACH
IN CM
14
24
24
37
58
58
LINEAR ARM KIT
WEIGHT CAPACITY
LB KG
1- 5
3 - 10
3 - 10
0.5 - 2.3
1.4 - 4.5
1.4 - 4.5
PARALLEL ARM KIT
MAX TORQUE
FT-LB NM
20
25
75
27
34
102
LQ-0002 Linear Arm
ships with two ASB-0C balancers.
LQ-0004 Linear Arm
ships with two TW-3 balancers.
LQ-0024H Heavy Duty
Arm
ships with two TW-3 balancers.
IN
HEIGHT
CM
24
36
36
61
91.4
91.4
EAA-04 - Provides easy conversion of standard Ergo-
Arms to the parallel style.
STANDARD TOOL MOUNT DIAMETER
IN CM
1.6
1.6
1.6
4.1
4.1
4.1
CUSTOM REACTION DEVICES
• Torque Tubes
• Articulating Torque Arms
• Ergo Arm 3 Zero Gravity Arms
• Smart Arms
Ergo-Arm 3
Articulating
Smart Carbon
Arm
Articulating
Torque Arm
Carbon Fiber
Arm
Ergo-Arm 3 Torque Tube
Contact an AIMCO Customer Service Associate, 1-503-254-6600, or toll free 1-800-852-1368, in order to determine the exact torque reaction system needed to improve the productivity and ergonomics of your assembly station.
Visit our NEW website www.aimco-global.com
GCI TORQUE REACTION ARMS
RUGGED FLEXIBILITY FOR EVEN THE MOST COMPLEX TORQUE APPLICATIONS
Carbon Fiber Arm
Constructed of durable aluminum, steel, or carbon fiber, GCI Torque Arms are available with multiple tool mounting options for application specifics.
These highly ergonomic and user friendly arms are available in torque ranges of 150 Nm to 7,500 Nm and with reaches ranging up to 20 ft.
GCI arms can be designed as Smart Arms with encoders and intuitive PC-based AdaptiCS software.
This complete Smart Arm system error-proofs even the most complex torque applications.
FEATURES AND BENEFITS
• Available in aluminum, steel, or carbon fiber
• Configurable installation: floor mount, wall mount, overhead mount, bench mount, or portable base
• Braking options: manual/automatic, discrete braking with verification, parking brakes, and electric/pneumatic actuation
• Tool holding options: fixed position, gimbal mount
• Integrated tool start/brake actuation capability: tool trigger start, remote tool start
• Smart Arm Capabilities:
– Available with as many as six encoders to monitor all desirable tool positions relative to application
– Intuitive, user-friendly AdaptiCS PC-based software that runs on an integrated industrial PC or on a customer supplied PC
– Accepts easily scalable part images
Rugged tablet
PC option for Smart Arm
MODEL MAX. TORQUE
IPT SERIES - TORQUES TO 375 NM
IPT150 150 Nm
IPT375
IP SERIES - TORQUES TO 4,000 NM
375 Nm
IP4 550 Nm
IP5
IP7
IP8T
F SERIES - CARBON FIBER ARMS
F70
F600
F1500
F3000
F7500
1,000 Nm
3,000 Nm
4,000 Nm
70 Nm
600 Nm
1,500 Nm
3,000 Nm
7,500 Nm
MAX. TOOL WEIGHT MAX. REACH MAX. VERTICAL TRAVEL
12 lb
50 lb
30 lb
50 lb
100 lb
100 lb
10 lb
50 lb
50 lb
75 lb
75 lb
5 ft
6 ft
8 ft
12 ft
12 ft
12 ft
3 ft
20 ft
20 ft
20 ft
12 ft
Visit our NEW website www.aimco-global.com
30 in
36 in
48 in
60 in
60 in
72 in
18 in
72 in
72 in
72 in
72 in
CONSTRUCTION
Aluminum
Steel
Steel
Steel
Steel
Steel
Carbon Fiber Composite
Carbon Fiber Composite
Carbon Fiber Composite
Carbon Fiber Composite
Carbon Fiber Composite
GCI TORQUE REACTION ARMS
FEATURES
Remote starts
Parking brake and main rotation stops
Additional Smart Arm Features
Discrete brake end rotation with encoder
Discrete brake tooling rotation
Encoded tool sleeve
Tool sleeve
AdaptiCS Software
• Batch count capabilities
• Bidirectional arm articulation tracking
• Full torque/angle results display
• Integrates into any line control (PLC, MES, etc.)
• Multiple part locate strategies (1-point, 2-point,
3-point)
• Fully programmable dynamic display with integrated PC option
• Multiple rework strategies to fit customer requirements
• Integrates devices such as torque controllers via open protocol, encoded GCI torque reaction arms, scanners, vision cameras, and digital IO (pass/fail)
• AdaptiCS Enterprise (optional) provides full line control, interlocks, and data collection
• Runs on Windows 7, 8, and 10
Visit our NEW website www.aimco-global.com
CARBON TORQUE ARMS / TUBES
CARBON TORQUE ARMS / TUBES
Carbon Arms and Carbon Torque tubes are lightweight, yet strong devices designed to absorb torque reactive forces. Highly flexible and modular, they adapt to a wide range of tools, and eliminate hazards to operators during fastening processes.
FEATURES AND BENEFITS
• Absorb torque reaction from continuous drive tools
• Counter balance tool weight when configured with AIMCO’s wide array of tool balancers (page
balancer kits
• Orient tool correctly to the workpiece to improve efficiency and reduce operator effort in alignment to the fastener
TELESCOPIC TORQUE ARMS
ACA80-1500
MODEL
ACA10-1000
ACA10-1500
ACA15-1000
ACA15-1500
ACA15-2000
ACA40-1000
ACA40-1500
ACA40-2000
ACA40-2500
ACA80-1500
ACA80-2000
ACA80-2500
ACA150-1500
ACA150-2000
ACA150-2500
ACA220-1500
ACA220-2000
ACA220-2500
ACA Series
MIN.
LENGTH
MM
646
806
986
658
828
998
495
665
486
646
806
486
668
838
1003
668
838
1,003
MAX.
LENGTH
MM
1,556
2,046
2,576
1,586
2,078
2,588
1,105
1,605
1,066
1,556
2,046
1,066
1,578
1,918
2,248
1,578
2,088
2,588
MAX
TORQUE
NM
80
80
80
40
40
40
15
15
40
10
10
15
150
150
150
220
220
220
ACA-POSIX
POSITIONING
SYSTEM
The compact, self-contained
ACA-Posix process visualization system guides operators through their assigned tasks. It connects to ACA-P2 series arms with integrated balancer kits.
FEATURES AND BENEFITS
• Intuitive and simple programming on 7” color
LCD touch-screen display
• Store up to 500 unique assembly sequences
• Communicates directly with Power Tool controllers over digital I/O
• Store and display product images or CAD drawings. Images/drawings are displayed with targeting sequences to direct operators easily through their task
• Output for synchronizing with line controls
MODEL
ACA-V15-1000
ACA-V15-1500
ACA-V15-2000
ACA-V40-1000
ACA-V40-1500
ACA-V40-2000
ACA-V40-2500
ACA-V80-1500
ACA-V80-2000
ACA-V80-2500
ACA-V150-1500
ACA-V150-2000
ACA-V150-2500
ACA-V220-1500
ACA-V220-2000
ACA-V220-2500
ACA-V Series
MIN.
LENGTH
MM
949
1,119
1,289
960
1,129
1,294
960
1,129
1,294
777
937
1,097
777
937
1,097
1,277
ACA-V15-1000
MAX.
LENGTH
MM
1,865
2,357
2,867
1,957.5
2,357
2,862
1,957.5
2,357
2,867
1,345
1,835
2,325
1,345
1,835
2,325
2,855
MAX
TORQUE
NM
150
150
150
220
80
80
80
220
220
40
40
40
15
15
15
40
ACA-P240-2500
ACA-P2 Series
X,Y Axis Encoders
(Requires ACA-POSIX System)
MODEL
MIN.
LENGTH
MM
ACA-P215-1000
ACA-P215-1500
ACA-P215-2000
ACA-P240-1000
ACA-P240-1500
ACA-P240-2000
ACA-P240-2500
ACA-P280-1500
ACA-P280-2000
1,157
830
1,000
ACA-P280-2500
ACA-P2150-1500
1,169
839
ACA-P2150-2000 1,009
ACA-P2150-2500
ACA-P2220-1500
1,174
839
ACA-P2220-2000 1,009
ACA-P2220-2500 1,174
647
803
977
647
803
977
MAX.
LENGTH
MM
2,737
1,757
2,249
2,760
1,749
2,087
1,227
1,713
2,227
1,227
1,713
2,227
2,419
1,749
2,259
2,760
MAX
TORQUE
NM
80
150
150
40
80
80
150
220
220
220
40
40
40
15
15
15
Visit our NEW website www.aimco-global.com
CARBON TORQUE ARMS / TUBES
ANTI-ROTATION TORQUE ARMS
ACTT-V40-850 300
ACTT SERIES TORQUE TUBES
MODEL
ACTT-V15-600 150
ACTT-V15-800 300
ACTT-V40-600 150
ACTT-V40-850 300
ACTT-V40-1500 600
ACTT-V80-900 300
ACTT-V80-1500 600
ACTT-V80-2100 900
MIN. LENGTH
MM
300
600
300
600
900
150
300
150
MAX. LENGTH
MM
600
800
600
850
1,500
900
1,500
2,100
MAX TORQUE
NM
80
80
80
40
40
15
15
40
MODEL
ACPTT-V15-510 150
ACPTT-V15-710 300
ACPTT-V40-510 150
ACPTT-V40-760 300
ACPTT-V40-1410 600
ACPTT-V80-810 300
ACPTT-V80-1410 600
ACPTT-V40-SA-510 150
ACPTT SERIES TORQUE TUBES
FOR ACSA ARTICULATING SUPPORT ARMS
MIN. LENGTH
MM
150
300
150
300
600
300
600
MAX. LENGTH
MM
600
800
600
850
1,500
900
1,500
MAX LENGTH
MM
15
15
40
40
40
80
80
ACCESSORIES
TOOL HOLDERS
DESCRIPTION MODEL
FOR ACRADYNE TOOLS
ACAH-40PS1000
ACAH-80PS3-5000
ACAH-150PS3-5000
Tool holder for carbon fiber arm, AcraDyne 1000 series pistol/straight tools, 40 Nm
Tool holder for carbon fiber arm, AcraDyne 3000/5000 series pistol/straight tools, 80 Nm
Tool holder for carbon fiber arm, AcraDyne 3000/5000 series pistol/straight tools, 150 Nm
MODEL DESCRIPTION
MIN. TOOL
GRIP (MM)
MAX. TOOL
GRIP (MM)
FOR TELESCOPIC ARMS
ACAH-15
ACAH-40-80
ACAH-150-220
Base tool holder 4 screws
Base tool holder 4 screws
Base tool holder 4 screws
Multi-Position
ACAH-15-MPE2745 Multi-position tool holder interface
ACAH-150220-MPE4070 Multi position tool holder
ACAH-4080-MPE2745 Multi-position tool holder
Swivel
ACAH-S154080
ACAH-SL15150
Swivel tool holder 20 to 35 mm
Swivel tool holder 40 to 55 mm
27
40
27
20
40
27
30
40
45
70
45
35
55
45
60
70
FOR ANTI-ROTATION ARMS
Straight
ACAHTT-15A-3060
ACAHTT-15S-2745
Angle Tool Holder, 15 Nm Arm
Straight Tool Holder, 15 Nm Arm
ACAHTT-4080A-3165 Angle Tool Holder,
40/80 Nm Arms
ACAHTT-40S-2745 Straight Tool Holder,
40/80 Nm Arms
30
27
31
27
60
45
65
45
Angle
ACSA ARTICULATING
SUPPORT ARMS
MODEL
ACSA-600-1500
ACSA-800-1500
ACSA-1000-1500
ACSA-600-1500
MAX
REACH
MM
600
800
1,000
MAX
HEIGHT
MM
1,500
1,500
1,500
MAX
TORQUE
NM
80
80
80
BALANCER KITS
FOR ACA-P2 SERIES
MODEL
MIN.
CAPACITY
(KG)
MAX.
CAPACITY
(KG)
ACA-P2BK-4 2 4
ACA-P2BK-6
ACA-P2BK-8
ACA-P2BK-10
ACA-P2BK-14
8
10
4
6
10
14
6
8
ACA-P2BK-10
Visit our NEW website www.aimco-global.com
WORKSTATION COMPONENTS AND ASSEMBLIES
COMPONENTS
TRACK
Steel with beige polyester finish. Use for vertical and horizontal workstation support.
PART
NUMBER
AT3-3
AT3-4
AT3-6
AT3-9*
PART
NUMBER
AT5-3
AT5-4
AT5-6
AT5-9*
AT5-12*
30#
TRACK
3 ft track
4 ft track
6 ft track
9 ft track
30#
TRACK
3 ft track
4 ft track
6 ft track
9 ft track
12 ft track
1.18
1.575
TRACK NUT (ATN-3/5)
Zinc plated steel. Use to attach accessories to track, as end stops, or to isolate rolling accessories.
• ATN-3 for 30 lb. track
• ATN-5 for 50 lb. track
1.26
14 GA
1.575
11 GA
END STOP (AES-3/5)
Zinc oxide finish. Use to prevent balancer trolley from “overtraveling” horizontal track.
• AES-3 for 30 lb. track
• AES-5 for 50 lb. track
MOUNTING PLATE
(AMP-5)
Black polyester finish.
Use as a base to mount vertical uprights.
5.00
3.50
0.562
DIA.
4.00
6.00
0.47
0.55
END CAP (AEP-3/5)
Black molded vinyl. Use to cap track ends for a professional finish.
• AEP-3 for 30 lb. track
• AEP-5 for 50 lb. track
ANGLE BRACKET (AB-3/5)
Black polyester finish.
Use to mount horizontal track to vertical track.
• AB-3 for 30 lb. track
• AB-5 for 50 lb. track
6.00
(152)
JOINT HANGER
BRACKET (AJH-3/5)
Black polyester finish.
Use to couple and hang end-to-end track.
• AJH-3 for 30 lb. track
• AJH-5 for 50 lb. track
0.41 DIA. TYPE
6.00
(152)
3.00
5.00
AJH-5 Shown
BALANCER TROLLEY (ABT-3/5)
Black polyester finish.
Use as moving support for tool balancers, hose, and cable. Quality ball bearing wheels for long life and smooth tracking.
• ABT-3 for 30 lb track (1.00 dia)
• ABT-5 for 50 lb track (1.25 dia)
HANGER BRACKET
(AHB-3/5)
Black polyester finish.
Use to suspend track at right angle.
• AHB-3 for 30 lb. track
• AHB-5 for 50 lb. track
0.41 DIA TYP
VERTICAL COLUMN (AVC-5*)
Beige polyester finish, 3” diameter x 9 ft upright steel column with welded base.
Use as floor mount for extra stability with jibs or workstation components.
2.50
HOSE/CABLE TROLLEY
Black polyester finish. Use for moving cable or hose festoon.
Supports hose cable
OD .60-.94.
• AIC3-2 for 30 lb. track
• AIC5-2 for 50 lb. track
U-BOLTS (AUB-5)
Zinc plated steel. Use to secure boom bracket, or any flat metal plate, to AVC-5 (sold individually).
END CLAMP (AEC5-2)
Black polyester finish.
Use as end stop with hose carrier for festoon.
Cable/hose OD .60-.94.
5.5
SUPPORT CLAMPS (ASC-3/5)
Black polyester finish. Use as additional support for track.
• ASC-3 for 30 lb. track
• ASC-5 for 50 lb. track
1.50
0.531 DIA. TYP
TOOL CLIP (SH-5)
Steel clip with safety latch. Use for tool attachment and as replacement clip for lightweight tool balancers.
Measures 2.37” long.
ROLLING HANGER (ABT5-R)
Black polyester finish. Use as support for rolling track. Allows X/Y axis movement, includes ball bearing wheels.
13.0”
4.5
3.00
4.00
1.0
90° CONNECTOR FOR
3/8” HOSE (WSCH)
3/8” I.D. Brass. Use to provide stable transfer point from air line to tool.
90 degree connector attaches to ABT-5.
WALL- AND FLOOR-
MOUNTED JIBS
3 FT. SWINGING JIB (AW3S)
3 FT FIXED JIB (AW3F)
3 FT. SWINGING JIB FOR CHANNEL MOUNT
(AJS3**)
Jibs are mounted to wall or beams to create free standing workstations. End stop, end cap, and balancer trolley included.
Maximum weight: 30 lb.
AW3S
AW3F
AJS3**
AW6S
AW6F
6 FT. SWINGING JIB (AW6S)
6 FT FIXED JIB (AW6F)
Jibs can be wall mounted or attached to vertical column (AVC-5) to create a freestanding workstation. End stop, end caps, and balancer trolley are included. Maximum weight: 50 lb.
All complete assemblies are beige polyester finish and include balancer trolley, end caps, and end stops. Floor mounted assemblies are not able to ship via UPS.
When choosing a workstation system, remember...
Total weight capacities should include tool balancer, hose/cable, and tool/fixture. Units need to be supported vertically and horizontally every 6 ft.
* * Additional freight may apply
** AJS3 Does not include balancer trolley
Visit our NEW website www.aimco-global.com
WORKSTATION COMPONENTS AND ASSEMBLIES
FLOOR MOUNTED
3 FT. SWINGING JIB*
(AW3FMS)
FLOOR MOUNTED
3 FT. FIXED JIB*
(AW3FMF)
Maximum weight: 30 lb
Column height: 6 ft
AW6FMS*
FLOOR MOUNTED
6 FT. SWINGING JIB*
(AW6FMS*)
AW6FMF*
FLOOR MOUNTED
6 FT. FIXED JIB*
(AW6FMF*)
Maximum weight: 50 lb
Column height: 9 ft
AW3FMS
AW3FMF
*Units include end stop, balancer trolley and intermediate carrier.
BENCH MOUNTED SWINGING JIB (JJ30-S)
BENCH MOUNTED FIXED JIB (JJ30)
Maximum weight: 30 lb
Column height: 48” including mounting plate
3 ft. swinging jib includes balancer trolley, end stop, and cap
JJ30
CREATE A CUSTOM SUPPORT SYSTEM USING AIMCO’S
QUALITY PRODUCTS
• Organize work area to create a safe, productive working environment
• Reduce risk of injury to assembler by providing support for heavy tools
• Protect valuable tools, fixtures, and monitoring devices from damage by suspending them out of the way
AIMCO BASIC WORKSTATION KIT (ATW-50)
AIMCO WORKSTATION KIT
BENCH MOUNTED WORKSTATION
WITH TORQUE ARM (JJ30-TA**)
• 5 lb. maximum weight (RPA-3 included)
20 inc hes
• 5’ column height including mounting plate
• 38” jib length (swinging)
• 15 ft-lb torque rating
• 3/8” NPT inlet
• 1/4” NPT outlet
• Beige polyester finish
• 1/4” braided air hose
• 21” maximum vertical arm travel
**Additional freight may apply
**For use with pneumatic tools only
JJ30-TA
• 50 lb maximum weight capacity
• 48” uprights
• 36” extensions
• Table mounts included
• 6’ tool rail with rolling trolley included
• All necessary hardware included
TROLLEY MOUNTED TORQUE ARM WITH
3-LB RETRACTOR AND HOSE (FA-50-2*)
Ergonomic arm absorbs torque reaction.
Moves front to back along overhead jib.
(TA-50-2)
Moves side to side on overhead track.
AIMCO can customize a workstation for you.
Contact an AIMCO Customer Service Associate
1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
AIR PREPARATION UNITS
AFRL STACKING FILTER/REGULATORS
Stacking filter/regulator combinations provide air filtration and precise regulation in a single unit for easy mounting and installation.
L
TR
LS
TG
TB
FEATURES AND BENEFITS
AFRL-2-C
AFRL-3-C
HS
HB
• All models include L-mount bracket, gauge, and metal bowl shields
• Polycarbonate filter and lubricator bowls (metal bowls standard on
AFRL-8)
• 25-micron filter included on all models
AFRL-3
AFRL-4
AFRL-8
• Regulating range: 7 – 125 PSI
• Custom order upgrade items include metal bowl, 5 micron filter, semi-automatic filter drain, and reduced PSI range regulator.
Contact an AIMCO Customer
Service Associate for more information, 1-503-254-6600, or toll free 1-800-852-1368
28178
HT Air Tool/AFRL
Carrying Kit
H
HS
H
TG
TR
TB
HB
AFRL-4HTA
Standalone Unit
LS
L
MODEL PORT GAUGE
AFRL-2
AFRL-8
1/4”
AFRL-2-C 1/4”
AFRL-3 3/8”
AFRL-3-C 3/8”
AFRL-4 1/2”
1”
PORT
1/8”
1/8”
1/4”
1/4”
1/4”
1/4”
FLOW RATE
CFM
70
60
140
105
140
180
BOWL
L/MIN SHIELD
2,000 yes
1,700
4,000 yes yes
3,000
4,000
5,000 yes yes yes
H HB HS L LS TB TG TR
IN/MM IN/MM IN/MM IN/MM IN/MM IN/MM IN/MM IN/MM
6.16 (156.5) 1.39 (35.3) 1.50 (38.1) 7.13 (181.1) 2.52 (64.0) 1.61 (41.0) 2.39 (60.7) 2.09 (53.1)
8.31 (211.1) 1.38 (35.1) 3.64 (92.5) 4.61 (117.1) 2.30 (58.4) 1.61 (40.9) 2.39 (60.7) 2.09 (53.1)
7.54 (191.5) 1.57 (40.0) 1.61 (40.9) 9.37 (238.0) 3.31 (84.1) 1.97 (50.0) 2.58 (65.5) 2.76 (70.1)
10.31 (261.9) 1.57 (39.9) 4.41 (112.0) 6.06 (153.9) 3.03 (77.0) 1.97 (50.0) 2.58 (65.5) 2.76 (70.1)
7.54 (191.5) 1.57 (40.0) 1.61 (40.9) 9.37 (238.0) 3.31 (84.1) 1.97 (50.0) 2.58 (65.5) 2.76 (70.1)
10.69 (271.5) 1.97 (50.0) 1.89 (48.0) 11.81 (300.0) 4.13 (104.9) 2.75 (69.9) 2.97 (75.4) 3.54 (89.9)
AIR PREPARATION UNITS: BASIC FUNCTIONS
Clean, regulated, and lubricated compressed air for
AIMCO tools
PRESSURE VESSEL
Stored compressed air, oil-water emulsion from condensate and lubricating oil
LUBRICATOR
Clean, dry compressed air, regulated at desired pressure
REGULATOR
Contaminated compressed air
- oil water, solids
(scale, etc.)
Clean compressed air with pressure fluctuations
FILTER
The supply of clean, dry air is essential to the operation of pneumatic powered tools. Use only clean filtered air for longer tool life. Provide proper airflow (CFM) and regulate air pressure (PSI) for optimum performance.
To determine unit size for application, you need to know:
• Total air flow (CFM) required for application
• Size of incoming air line and size of air line required by tool
• Air supply pressure (PSI)
• Allowable pressure drop
• Does the application require lubrication?
• Does the overall system have the required capacity?
Visit our NEW website www.aimco-global.com
AIR LINE
Polyurethane Hose
• Durable Polyurethane is chemical resistant and lightweight, and provides excellent recoil memory and maximum flexibility
I.D.
16”
TAIL
“RL”
(Retracted Length)
• Available in transparent hose color (opaque also available)
• Assemblies for coiled hose include reusable swivel fitting.
Straight hose available with or without fittings
• Working temperature: –104° F to 175° F
SINGLE AIR HOSE ASSEMBLIES (COILED)
MODEL
DESCRIPTION
(O.D. x I.D. x
LENGTH)
ASH-250C-10MSZ 3/8” x 1/4” x 10’
ASH-250C-15MSZ 3/8” x 1/4” x 15’
ASH-250C-25MSZ 3/8” x 1/4” x 25’
ASH-375C-15MSZ 9/16” x 3/8” x 15’
ASH-375C-25MSZ 9/16” x 3/8” x 25’
ASH-500C-15MSZ 3/4” x 1/2” x 15’
ASH-500C-25MSZ 3/4” x 1/2” x 25’
RETRACTED
LENGTH
7”
9-1/2”
15-1/2”
10”
14”
13”
23”
WORKING
PRESSURE
100 psi
100 psi
100 psi
100 psi
100 psi
100 psi
100 psi
NPT
FITTINGS
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
Custom length coil assemblies and special colors available in minimum order quantities. contact an AIMCO Customer Service Associate, 1-503-254-6600, or toll free 1-800-852-1368.
8”
TAIL
STRAIGHT AIR HOSE (SOLD PER FOOT)
MODEL DESCRIPTION
ASH-375Z
ASH-500Z
3/8” I.D.
1/2’’ I.D.
Contact an AIMCO Customer Service Associate about full reel pricing, 1-503-254-6600, or toll free 1-800-852-1368.
Rubber Hose
28796
1/2” ID
• Designed for use in a wide range of industrial, construction, and agricultural applications
• Constructed of high grade, reinforced EPDM synthetic rubber
• Working temperature:
–40° F to 190° F
SINGLE AIR HOSE (RUBBER)
I.D.
O.D.
LENGTH WORKING PRESSURE WEIGHT
3/16” 0.44”
1/4” 0.5”
5/16” 0.58”
3/8” 0.67”
1/2” 0.81”
5/8” 0.97”
3/4” 1.12”
10 ft
10 ft
10 ft
10 ft
10 ft
10 ft
10 ft
200 psi
200 psi
200 psi
200 psi
200 psi
200 psi
200 psi
Custom lengths available. Contact an AIMCO Customer Service Associate for more details, 1-503-254-6600, or toll free 1-800-852-1368.
0.8 lb
0.9 lb
1.2 lb
1.5 lb
2.0 lb
2.7 lb
3.4 lb
HELPFUL HINTS FOR AIR HOSE USE
• Use recommended I.D. air hose and fittings
• Replace air hose regularly to help maintain clean air
• A clear hose allows you to see water or dirt accumulation in hose
• Use correct length of hose to reduce air loss and pressure drop
• Use locking quick-disconnect couplers for additional safety
Visit our NEW website www.aimco-global.com
AIR LINE ACCESSORIES
BRASS QUICK COUPLERS
Manual ball couplers designed for use with ergonomic twist plugs.
Brass with nitrile seals, rated to 300 PSI, from
-40° to +250° F.
MODEL DESCRIPTION
B23
B23E
B25
1/4” NPT F x 1/4” QC Brass Coupler
1/4” NPT F x 3/8” QC Brass Coupler
3/8” NPT F x 3/8” QC Brass Coupler
IN-LINE MINI REGULATORS
Easily adjust airflow with the turn of a dial.
MODEL
932-100-0
932-110-0A
CAPACITY
1/8” NPT
1/4” NPT
B23
B23E
B25
932-100-0
932-110-0A
MINI AIR GAUGE SWIVEL JOINT KITS
• Bi-directional 360º rotation
• Keeps air hose straight and untwisted
• Decreases operator fatigue
MODEL INLET WEIGHT
7021AG
7041AG
1/4” NPT
3/8” NPT
MAX
PSI
TOOL
CFM
3 oz Up to 125 25
3 oz Up to 125 50
7021AG
SWIVEL AIR FITTINGS
For use with most portable air tools, including grinders, drills, screwdrivers, buffers, sanders, staple guns, and more. Rotates 360º for awkward angles.
MODEL
7021
7041A
7051
INLET
1/4” NPT
3/8” NPT
1/2” NPT
WEIGHT
3 oz
11 oz
7 oz
7021
MAX PSI
Up to 125
Up to 125
Up to 125
7041A
7051
TOOL CFM
25
50
60
AIR LINE FITTINGS
MODEL CAPACITY
250-RZ 1/4” NPT Rigid Fitting
250-SZ 1/4” NPT Swivel Fitting
375-RZ 3/8” NPT Rigid Fitting
375-SZ 3/8” NPT Swivel Fitting
500-SZ 1/2” NPT Swivel Fitting
375-RZ
375-SZ
500-SZ
BRASS ADAPTERS
AND BUSHINGS
209P-8-6
Pipe fittings for use as medium and low pressure connectors.
Meets functional requirements of SAE
J530, SAE J531,
ASME and ASA.
Rated 1,000 PSI from
-65° to +250° F.
222P-6-4
222P-8-6
MODEL DESCRIPTION
222P-6-4 3/8” NPT F x 1/4” NPT M Adapter
222P-8-6 1/2” NPT F x 3/8” NPT M Adapter
222P-12-8 3/4” NPT F x 1/2” NPT M Adapter
209P-6-4 1/4” NPT F x 3/8” NPT M Bushing
209P-8-6 3/8” NPT F x 1/2” NPT M Bushing
ERGONOMIC TWIST PLUGS
These unique, ergonomically designed hose fittings provide 360° rotation and
35° angled rotation in any direction.
• Two rotation points prevent kinking of air hose
TS-30NP-2NPT
• Design ensures full air pressure flow
• Rotating joint comes with polyurethane dust cover
• Heavy duty construction
TS-20US-2NPT
TS-20NP-2NPT
TS-30US-3NPT
MODEL DESCRIPTION
TS-30NP-2NPT 3/8” NPT Female x 1/4” NPT Male
TS-20NP-2NPT 1/4” NPT Female x 1/4” NPT Male
TS-20US-2NPT 1/4” US Plug x 1/4” NPT Male
TS-30US-3NPT 3/8” US Plug x 3/8” NPT Male
Visit our NEW website www.aimco-global.com
STANDARD FASTENER TOOLS
STANDARD FASTENER TOOLS
Connect your tool to the application with Bits, Sockets and Nutsetters from AIMCO.
AIMCO has assembled the most complete package of commonly used screwdriver bits and nutsetters in the industry. Our goal is to supply you with the highest quality bits and nutsetters for your fastener needs.
L
Whether you’re in electronics, aerospace, automotive, or fit your needs.
IMPACT SOCKETS
PART NO
A31/4
A35/16
A33/8
A306
A307
A308
HEX
3/8” Square Drive
1/4”
5/16”
3/8”
D1
MM
10
12
15
6 mm 10
7 mm 13
8 mm 14
Sq.
3/8” Square Drive, Deep
A307-2
A307-2.75
A308-2
7 mm
7 mm
8 mm
13
13
14
0.49
0.49
0.55
L
Ø
D1
Ø
D2
Ø
D2 L
TYPE A
Sq.
TYPE B
Ø
D1
L
L
Ø
D2
0.39
0.47
0.59
0.39
0.49
0.55
Ø
D1
D1
IN
D2 D2
MM
TYPE C
Sq.
H
(6PT)
IN
H
(6PT)
19
20
20
19
19
19
Ø
D1
0.75
0.75
0.75
0.75
0.79
L
IN
Ø
D2
Ø
D2
TYPE A
L
MM
L
34
32
32
34
34
34
L
Ø
D2
1.34
1.34
1.34
1.34
1.26
1.26
Ø
D2
Ø
D2
20
20
20
TYPE A
0.79
0.79
0.79
70
50
L
1.97
2.76
1.97
PART NO HEX
D1
MM
QUICK CHANGE CHUCKS
H
D1
IN
1/2” Square Drive, Magnetic
A408MP
A410MP
A412MP
8 mm
10 mm
12 mm
16
18
21
0.61
0.69
0.81
3/4” Square Drive
A611/16
A63/4
A613/16
A614
A616
A617
11/16” 30
3/4” 32
13/16” 35
14 mm 24
16 mm
17 mm
27
30
1.18
1.26
1.38
0.95
1.06
1.18
3/4” Square Drive, Deep
A611/16-4 11/16” 31
A63/4-4 3/4” 33
A613/16-4 13/16” 36
A617-4
A618-4
A619-4
17 mm 31
18 mm 32
19 mm 33
1.22
1.30
1.42
1.22
1.26
1.30
1” Square Drive
A87/8
A815/16
A81
A817
A819
A821
7/8” 37
15/16” 38
1” 41
17 mm 31
19 mm 33
21 mm 37
1.46
1.50
1.61
1.22
1.30
1.46
D2
MM
25
25
25
44
44
44
44
44
38
44
44
44
38
44
38
54
54
54
50
50
50
D2
IN
0.98
0.98
0.98
1.73
1.73
1.73
1.50
1.73
1.50
2.13
2.13
2.13
1.97
1.97
1.97
L
MM
1.73
100
1.73
100
1.73
100
1.73
100
1.73
100
1.50
100
40
40
40
50
50
50
55
50
55
59
59
59
63
63
63
L
IN
1.58
1.58
1.58
3.94
3.94
3.94
3.94
3.94
3.94
1.97
1.97
1.97
2.17
1.97
2.17
2.32
2.32
2.32
2.48
2.48
2.48
Sq.
3/8” Square Drive, Magnetic
A31/4MP
A35/16MP
A33/8MP
A308MP
A310MP
A311MP
1/4”
5/16”
3/8”
8 mm
10 mm
11 mm
10
12
15
14
17
17
0.39
0.47
0.59
0.55
0.65
0.65
19
19
19
20
20
19
0.75
0.75
0.75
0.79
0.79
0.75
34
34
34
32
32
34
1.34
1.34
1.34
1.26
1.26
1.34
PART NO
SQ
DRIVE
ADC-2S
ADC-3S
1/4”
3/8”
ADC-4S 1/2”
ADC-3SH7/16Z 3/8”
ADC-4SH7/16Z 1/2”
ALLEN SOCKETS
HEX
1/4”
1/4”
1/4”
7/16”
7/16”
D1
MM
19
20
19
25
33
D1
IN
0.75
0.79
0.75
0.98
1.30
L
MM
38
42
46
46
55
1/2” Square Drive
A43/8
A47/16
A41/2
A408
A409
A410
3/8”
7/16”
1/2”
16
18
19
8 mm 16
9 mm 16
10 mm 18
0.63
0.69
0.75
0.61
0.63
0.69
25
25
25
25
25
25
0.98
0.98
0.98
0.98
0.98
0.98
38
38
50
40
40
40
1.50
1.50
1.97
1.58
1.58
1.58
PART NO HEX
L1
MM
L1
IN
L1
H
L
MM
L
L
IN
1/2” Square Drive, Deep
A43/8-3.25
A47/16-3.25
7/16” 19
A41/2-3.25
A410-2
A410-3
A410-3.25
A411-3.25
3/8” 17
1/2”
10 mm
10 mm
10 mm
11 mm
22
18
18
17
19
0.67
0.73
0.85
0.69
0.69
0.67
0.73
25
25
25
25
25
25
25
0.98
0.98
0.98
0.98
0.98
0.98
0.98
82
82
82
50
75
82
82
3.23
3.23
3.23
1.97
2.95
3.23
3.23
3/8” Square Drive
A31/4C
A304C
1/4”
4 mm
1/2” Square Drive
A41/4C
A405C
1/4”
5 mm
10
10
25
25
0.39
0.39
0.98
0.98
42
42
50
50
1.65
1.65
1.97
1.97
Additional types and sizes of fastener tools, as well as custom parts, are available upon request. Contact an AIMCO Customer Service Associate at 1-503-254-6600, or toll free 1-800-852-1368.
L
IN
1.50
1.65
1.81
1.81
2.17
Sq.
Visit our NEW website www.aimco-global.com
STANDARD FASTENER TOOLS
L
UNIVERSAL SOCKETS
EXTENSIONS
H Sq.
L H
H
Sq.
L
D2
PART NO HEX
D1
MM
3/8” Square Drive
A310U
A311U
10 mm
11 mm
16
16
1/2” Square Drive
A412U
A413U
12 mm
13 mm
20.5
19
D1
IN
0.63
0.63
0.81
0.75
D1
D2
MM
20
20
25
24
D2
IN
0.79
0.79
0.98
0.95
L
MM
55
60
70
70
L
IN
2.17
2.36
2.76
2.76
PART NO
A375E
A405E
A610E
A810E
A1220E
A1418E
A2426E
SQ
DRIVE
3/8”
1/2”
3/4”
1”
1-1/4”
1-1/2”
2-1/2”
HEX
3/8”
1/2”
3/4”
1”
1-1/4”
1-1/2”
2-1/2”
H
L
MM
75
51
100
102
200
178
264
L
IN
Sq.
2.95
2.01
3.94
4.02
7.87
7.01
10.39
D
MM
54
60
84
137
20
30
44
SOCKET ADAPTERS
NUTSETTERS
L
PART NO
A3B07-1.2
A3B07-2
A3B07-2.75
A3B07-4
A3B08-1.2
A3B08-2
A3B08-2.75
A3B08-4
A3B08-6
A3B08-8
A3B09-2.75
A3B09-4
A3B1/4-2
A3B1/4-2.5
A3B5/16-2
A3B5/16-2.5
A3B3/8-2
A3B3/8-2.5
A3B05-2.75
A3B55-1.2
A3B55-2.75
A3B55-4
A3B06-2.75
A3B10-1.2
A3B10-2
A3B10-2.75
A3B11-2.75
A3B12-1.2
A3B13-2.75
A3B14-2.75
A3B16-2.75
A3B17-2.75
HEX
8 mm
8 mm
8 mm
8 mm
9 mm
9 mm
7 mm
7 mm
7 mm
7 mm
8 mm
8 mm
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
5 mm
5.5 mm
5.5 mm
5.5 mm
6 mm
10 mm
10 mm
10 mm
11 mm
12 mm
13 mm
14 mm
16 mm
17 mm
H
L
MM
50
63
50
63
50
63
70
30
70
100
70
30
50
70
100
30
50
70
100
150
200
70
100
30
50
70
70
30
70
70
70
70
L
IN
2.76
3.94
5.91
7.87
2.76
3.94
1.18
1.97
2.76
3.94
1.18
1.97
2.50
2.76
1.18
2.76
3.94
2.76
1.97
2.50
1.97
2.50
1.97
1.18
1.97
2.76
2.76
1.18
2.76
2.76
2.76
2.76
FEMALE MALE
PART NO SQ. DRIVE SQ. DRIVE
A302A
A403A
A504A
A604A
A806A
A128A
A#508A
3/8”
1/2”
5/8”
3/4”
1”
1-1/4”
Spline #5
1/4”
3/8”
1/2”
1/2”
3/4”
1”
1”
D
MM
50
60
60
22
25
35
38
D
IN
0.87
0.98
1.38
1.50
1.97
2.36
2.36
L
MM
70
76
90
35
37
47
53
L
IN
1.38
1.46
1.46
2.09
2.76
2.99
3.54
Bit and Nutsetter Part Number Nomenclature
Precedes Part Number
BITS
A3S = Phillips
A38S = Phillips
A39S = Phillips
®
Power
Drive
A3W = Double Ended
Phillips
®
®
®
Insert
Insert
Reduced Nose
A3M = Slotted Power Drive
A38M = Slotted Insert
A3MT = Slotted Power Drive
Reduced Nose
A3C = Allen Socket Head
Power Drive
A38C = Allen Socket Head
Insert
A3R = Square Recess
Power Drive
A3RT = Square Recess
Turned Down (Power)
A38R = Square Recess Insert
A3T = Torx
®
Power Drive
A38T = Torx
®
Insert
A3TS = Torq-Set
®
Power
Drive
A38TS = Torq-Set
®
Insert
A3TA = Triangle Power
Drive
A3TW = Tri-Wing
®
Power
Drive
A38TW = Tri-Wing
®
Insert
A7 = 7/16 Power Drive
AS = Electric Type
Phillips
®
AM = Electric Type Slotted
ATW = ElectricType Tri-
Wing
®
AT = Electric Hios Type
Torx
®
A26S = Electric Driver
Phillips
®
A26M = Electric Driver Slotted
A26C = Electric Driver Allen
Socket Head
A3BHM = Insert Bit Holder
(Magnetic Type)
A3BHD = Insert Bit Holder
(Non Magnetic)
NUTSETTERS
A3B = Nutsetter
A3BMP = Magnetic (MP)
Pressed Type
A3BMS = Magnetic (MS)
Spring Loaded
A3BMT = Magnetic (MT)
Tube Type
A3BU = Universal
Nutsetter
MAG-O-NETS
AM = AIMCO Mag-O-Net
®
Contained within
Part Number
BITS
PZ = Pozidriv
®
PZACR = Pozidriv
SDV = Supadriv
®
®
ACR
TR = Torx
®
Tamper
Resistant
®
ACRI = ACR
ACR = ACR
®
®
Installation
Remove
ACRB = ACR
®
4x4 Both
Install and
Remove
E4 = Electric 4mm diameter
E5 = Electric 5mm diameter
RS = Reduced Shank
Additional types and sizes of fastener tools, as well as custom parts, are available upon request. Contact an AIMCO Customer Service Associate at 1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
D
IN
0.79
1.18
1.73
2.13
2.36
3.31
5.39
L
Sq.
STANDARD FASTENER TOOLS
MAG-O-NETS
®
: A Revolutionary Way to Convert Standard Bits to Magnetic Bits
FEATURES AND BENEFITS
• Easy, cost effective alternative to traditional magnetic bit holder and insert bit combination
• Improves torque transfer by eliminating “wobble effect”
• Easily adjust magnetic attraction by moving Mag-O-Net collar closer to or further from fastener
• Fits virtually any standard screwdriver bit
• Reusable and interchangeable
– once a bit is worn out, simply remove your Mag-O-Net and slide it onto the next bit
• Lifetime guarantee on magnetic attraction
PART
NO
AM1/4Z
AM5Z
AM3/16Z
INNER OUTER L
DIAMETER (ID) DIAMETER (OD) MM
7 mm
6 mm
3/16 in
19 mm
17.5 mm
17.5 mm
10
10
10
OD
ID
*U.S. Patent 5861789
L
PHILLIPS POWER BITS
L
TORX POWER BITS
PART NO
A3S0-2
A3S1-2
A3S1-2.75
A3S1-3
A3S1-3.5
A3S1-4
A3S1-6
A3S2-1.2
A3S2-1.6
A3S3-2
A3S3-2.75
Double-Ended
POINT
SIZE
1
1
1
1
1
0
1
3
3
2
2
L
MM
90
100
150
50
50
70
75
30
40
50
70
L
IN
1.97
1.97
2.76
2.95
3.54
3.94
5.91
1.18
1.57
1.97
2.76
PART NO
A3T6-2
A3T7-2
A3T7-2.75
A3T7-3.5
A3T7-6
A3T8-2
A3T9-2.75
BIT HOLDERS
TORX
SIZE
T7
T8
T7
T7
T9
T6
T7
L
MM
50
50
70
90
150
50
70
L
L
12
A3W1-3
A3W1-4
A3W2-2
A3W2-3
A3W2-4
A3W2-6
A3W2-8
A3W2-10
A3W2-12
A3W3-2
A3W3-3
A3W3-4
A3W3-6
A3W3-8
1
1
2
2
2
2
2
2
2
3
3
3
3
3
75
100
50
75
100
150
200
250
300
50
75
100
150
200
2.94
3.94
1.97
2.94
3.94
5.91
7.87
9.84
11.81
1.97
2.94
3.94
5.91
7.87
PART NO
1/4” Hex, Magnetic
A3BHM-3
A3BHM-4
A3BHM-6
A3BHM-8
A3BHM-10
L
MM
75
100
150
200
250
L
IN
2.94
3.94
5.91
7.87
9.84
Additional types and sizes of fastener tools, as well as custom parts, are available upon request. Contact an AIMCO Customer Service Associate at 1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
1/4
H
L
IN
1.97
1.97
2.76
3.54
5.91
1.97
2.76
ERGO-DRIVE SERIES
ERGO-DRIVE
®
SOCKETS PROTECT...
...YOUR INVESTMENT!
Pulse tools are an investment and the anvil is the most expensive single part of any pulse tool. ERGO-DRIVE sockets decrease vibration and wear on this critical component.
VIBRATION LEVEL
db(VL)
125
120
115
110
105
100
95
90
85
113
X
107
109
101
Y
AXIS DIRECTION
C O N V E N T I O N A L S O C K E T
120
Z
113
E R G O - D R I V E S O C K E T
...YOUR ASSEMBLERS!
ERGO-DRIVE sockets cause significantly less vibration during fastening than conventional sockets. This allows your assemblers to do their jobs without the worry of vibration related injuries.
EXTENSION
LENGTHS
75 MM
ERGO DRIVE
STANDARD
2%
100 MM
ERGO DRIVE
STANDARD
150 MM
ERGO DRIVE
STANDARD
3.5%
7%
12%
18%
29%
% TORQUE LOSS USING ULT-70 (SET AT 45Nm)
...YOUR PRODUCTS!
By reducing run-out and vibration, ERGO-DRIVE sockets allow the most repeatable, accurate rundowns to take place, ensuring excellent product quality.
ERGO-DRIVE VS. STANDARD
Cross Section
ERGO-DRIVE
O-ring retaining insert maximizes secure fit to your pulse tool.
SLEEVE
UDBP-TA50
RECESSED
SQUARE DRIVE
STANDARD
Cross Section
EXTENSION
STANDARD
EXTENSION
ERGO-DRIVE
Visit our NEW website www.aimco-global.com
ERGO-DRIVE FASTENER TOOLS
L
Ø
D1
Ø
D2
ERGO-DRIVE SOCKETS
Sq.
PART NO HEX
3/8” Square Drive
A31/4EDS
A31/2EDS
A306EDS
A308EDS
A310EDS
A312EDS
A314EDS
A316EDS
A318EDS
1/4”
1/2”
6 mm
8 mm
10 mm
12 mm
14 mm
16 mm
18 mm
H
(6PT)
D1
MM
14
17
20
22
25
27
10
20
10
TYPE A
L
Ø
D1
L
Sq.
TYPE B
Ø
D1
L
Ø
D2
L
TYPE A
L
0.39
0.77
0.39
0.55
0.65
H
(6PT)
0.79
0.87
0.98
1.06
D1
Ø
D1
IN
Sq.
H
(6PT)
D2
20
20
20
20
20
20
19
22
19
Ø
D1
0.75
0.87
0.75
0.79
0.79
Ø
D1
0.79
0.79
0.79
0.79
D2
Ø
D2
IN
TYPE A
L
MM
L
L
42
42
42
42
45
44
44
44
1/2” Square Drive
A41/2EDS
A413EDS
A414EDS
A415EDS
A416EDS
A417EDS
A418EDS
A419EDS
1/2”
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
23
24
25
19
22
28
29
30
0.75
0.85
0.89
0.93
0.98
1.10
1.14
1.18
25
25
25
25
25
28
28
28
0.98
0.98
0.98
0.98
0.98
1.10
1.10
1.10
52
52
52
50
52
54
54
54
3/4” Square Drive
A61-1/8EDS
A61-1/4EDS
A61-1/2EDS
A618EDS
A624EDS
1-1/8”
1-1/4”
1-1/2”
18 mm
24 mm
1” Square Drive
A815/16EDS
A8100EDS
15/16” 38
100 mm 136
57
31
40
44
49
1.73
1.91
2.24
1.22
1.52
1.50
5.35
44
44
40
44
44
54
76
1.73
1.73
1.73
1.73
1.73
2.13
2.99
69
120
68
60
65
64
66
Ø
D2
2.52
2.60
2.68
2.36
2.36
Ø
D2
L
IN
Ø
D2
Ø
D2
Ø
D2
1.73
1.73
1.73
1.65
1.65
1.65
1.65
D2
1.77
1.77
2.72
4.72
1.97
2.05
2.05
2.05
2.05
2.13
2.13
2.13
H
ERGO-DRIVE QUICK CHANGE CHUCKS
H
H
Sq.
Sq.
Sq.
PART NO
SQ
DRIVE
3/8” Square Drive
A352EDE
A3100EDE
A375EDE
A3150EDE
A3190EDE
A3254EDE
A3300EDE
A3320EDE
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
A464EDE
A476EDE
A4125EDE
A4204EDE
A4254EDE
A4355EDE
3/4” Square Drive
A676EDE
A6100EDE
A6150EDE
A6200EDE
3/4”
3/4”
3/4”
3/4”
1” Square Drive
A8150EDE
A8200EDE
1”
1”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
H
Ø
D1
L
L L
MM
TYPE A
IN
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
52
100
75
150
190
254
300
320
1/2”
1/2” Ø
D1
1/2”
1/2”
1/2”
1/2”
64 2.52
76
125
2.99
4.92
204
254
355
8.03
TYPE C
13.98
L
2.05
3.94
2.95
5.91
7.48
L
11.81
12.60
L
Ø
D2
D
MM
Ø
D
D
IN
Ø
20
20
20
20
20
20
20
20
28
Ø 28
28
28
28
28
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
1.10
1.10
1.10
1.10
1.10
1.10
3/4”
3/4”
3/4”
3/4”
1”
1”
76
100
150
200
150
200
2.99
3.94
5.91
7.87
5.91
7.87
40
40
40
40
54
54
1.58
1.58
1.58
1.58
2.13
2.13
Sq.
Ø
D
PART NO
3/8” Square Drive
ADC-3SEDSQ
ADC-3SEDSQH7/16
1/2” Square Drive
ADC-4SEDSQ
ADC-4SEDSQH7/16
SQUARE DRIVE
3/8”
3/8”
1/2”
1/2”
HEX
1/4”
7/16”
1/4”
7/16”
Additional types and sizes of fastener tools, as well as custom parts, are available upon request. Contact an AIMCO Customer Service Associate at 1-503-254-6600, or toll free 1-800-852-1368.
Visit our NEW website www.aimco-global.com
CUSTOM BITS, SOCKETS, AND EXTENSIONS
CUSTOM BITS, SOCKETS, AND EXTENSIONS
FOR THE POWER TOOL USER
AIMCO can provide specials for virtually any application.
From design to delivery, AIMCO’s quick response ensures high quality, tight tolerance specials.
Specials are available in every style including:
• Deep Socket
• Extended Socket
• Universal
• Allen Head
• Torx Head
• Socket Adapter
• Nut Runner Socket
• Nut Runner Joint
• Nutsetter
• Magnetic Nutsetter
• Universal Nutsetter
• Screwdriver Bits
Sample request forms are shown. Your detailed requirements will allow AIMCO to quickly respond with custom solutions for your fastening requirements.
ØD1
A
H
L1
L
ØC
Sq.
L2
ØD2
MAGNET
MP MT MS
SOCKET
H
SIZE
L
TYPE
L1 L2 A
ØC ØD1 ØD2
Sq.
Visit our NEW website www.aimco-global.com
SOCKET
TYPES
SPECIAL PARTS
SPECIAL PARTS
Visit our NEW website www.aimco-global.com
SPECIAL PARTS
Visit our NEW website www.aimco-global.com
CONVERSION CHARTS
1/32
1/16
3/32
1/8
5/32
3/16
7/32
1/4
Fraction
n
Decimal
n
Metric Conversions (to .32)
DECIMAL
.03125
.0625
.09375
.125
.15625
.1875
.21875
.25
MM
.7938
9/32
1.5875
5/16
2.3812
11/32
3.175
3/8
3.9688
13/32
4.7625
7/16
5.5562
15/32
6.35
1/2
DECIMAL
.28125
.3125
.34375
.375
.40625
.4375
.46875
.5
MM
7.1438
17/32
7.9375
9/16
8.7312
19/32
9.525
5/8
10.3188
21/32
11.1125
11/16
11.9062
23/32
12.7
3/4
DECIMAL
.53125
.5625
.59375
.625
.65625
.6875
.71875
.75
MM
13.4938
25/32
14.2875
13/16
15.0812
27/32
15.875
7/8
16.6688
29/32
17.4625
15/16
18.2562
31/32
19.05
1
DECIMAL
.78125
.8125
.84375
.875
.90625
.9375
.96875
1.0
MM
19.8438
20.6375
21.4312
22.225
23.0188
23.8125
24.6062
25.4
Thread Size to Hex Size
M 8
(M 8)
M 10
(M 10)
M 12
(M 12)
M 14
(M 14)
M 16
M 18
M 20
(M 22)
M 22
M 24
M 2
M 2.3
M 2.6
M 3
M 3.5
M 4
M 5
(M 5-6)
M 6
M 7
UNITS TO BE
CONVERTED
1 ozf-in
1 lbf-in
1 lbf-ft
1 gf-cm
1 kgf-cm
1 kgf-m
1 mN-m
1 cN-m
1 N-m
OZF-IN
= 1
= 16
= 192
= 0.014
= 13.89
= 1389
= 0.142
= 1.42
= 141.6
19
21
22
24
27
30
32
34
36
13
14
16
17
18
7
8
9
10
11
MM
4
4.5
5
5.5
6
M 60
M 64
M 68
M 72
M 76
M 80
M 85
M 90
M 95
M 100
M 105
M 110
M 115
M 120
M 27
M 30
M 33
M 36
M 39
M 42
M 45
M 48
M 52
M 56
115
120
130
135
145
150
155
165
170
90
95
100
105
110
65
70
75
80
85
MM
41
46
50
55
60
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/4
2-1/2
UNC
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
INCHES
7/16
1/2
9/16
11/16
3/4
7/8
15/16
1-1/8
1-5/16
1-1/2
1-11/16
1-7/8
2-1/16
2-1/4
2-5/8
3
3-3/8
3-3/4
SAE
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1-1/8
1-1/4
1-3/8
1-1/2
SAE
LBF-IN
0.0625
1
12
0.0009
0.868
86.8
0.009
0.088
8.851
Torque Conversion Factors
LBF-FT
0.005
0.083
1
0.00007
0.072
7.233
0.0007
0.007
0.738
GF-CM
72
1152.1
13826
1
1000
100000
10.2
102
10197
METRIC
KGF-CM
0.072
1.152
13.83
0.001
1
100
0.01
0.102
10.20
KGF-M
0.0007
0.0115
0.138
0.00001
0.01
1
0.0001
0.001
0.102
INTERNATIONAL SYSTEM - S.I.
MNM CNM NM
7.062
113
1356
0.098
98.07
9807
1
10
1000
0.706
11.3
135.6
0.01
9.807
980.7
0.1
1
100
0.007
0.113
1.356
0.0001
0.098
9.807
0.001
0.01
1
INCHES
7/16
1/2
9/16
5/8
3/4
7/8
15/16
1-1/16
1-1/4
1-7/16
1-13/16
2
2-3/16
Visit our NEW website www.aimco-global.com
INDEX
MODEL # PAGE MODEL #
A
PAGE MODEL #
PAGE MODEL #
PAGE MODEL #
PAGE
Visit our NEW website www.aimco-global.com
INDEX
MODEL # PAGE MODEL # PAGE MODEL # PAGE MODEL #
,
PAGE MODEL # PAGE
Visit our NEW website www.aimco-global.com
INDEX
MODEL #
B
C
D
E
PAGE MODEL #
F
G - H
I
iBC4E 15 iBC4EG 15 iBC4EGV 15 iBC4EV 15
iEC4E 14 iEC4EG 14 iEC4EGV 14 iEC4EV 14
J - K
L
M - Q
R
PAGE MODEL # PAGE MODEL #
S
T
U - V
PAGE MODEL #
PAGE
Visit our NEW website www.aimco-global.com
INDEX
MODEL # PAGE MODEL # PAGE MODEL # PAGE MODEL #
PAGE MODEL #
W - Z
Numbers
PAGE
Visit our NEW website www.aimco-global.com
PRINTED IN THE U.S.A.
LIT-AT100, REV 08-08-17, ©2017 AIMCO
AIMCO CORPORATE HEADQUARTERS
10000 SE Pine Street
Portland, Oregon 97216
Phone: (503) 254–6600
Toll Free: 1-800-852-1368
AIMCO CORPORATION DE MEXICO SA DE CV
Ave. Cristobal Colon 14529
Chihuahua, Chihuahua. 31125
Phone: (01-614) 380-1010
Fax: (01-614) 380-1019
AIMCO SOUTH AMERICA
Carrera 29A, #7B-91.
Origami Building. Int604.
Medellin; Colombia 050021
AIMCO EUROPE
Dibao Plaza Avenida Río Gallo, 431
19174 Galápagos - Guadalajara
Spain
Phone: +34 673 34 99 25
AIMCO CHINA
Room 607, No. 3998 Hongxin Rd
Minhang District, Shanghai
China
Phone: 0086-21-34319246
Fax: 0086-21-34319245
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 10 GEN IV ACE CONTROLLER
- 17 CONTROLLER SOFTWARE
- 18 1000 SERIES NUTRUNNERS
- 20 1000, 2000, & 5000 SERIES PISTOL GRIP NUTRUNNERS
- 21 2000, 3000, & 5000 SERIES ANGLE NUTRUNNERS
- 22 2000, 3000, & 5000 SERIES INLINE NUTRUNNERS
- 23 5000 SERIES FIXTURED NUTRUNNERS
- 24 TUBENUT NUTRUNNERS AND SPECIALTY GEARHEADS
- 25 HOLD & DRIVE NUTRUNNERS
- 26 MID-EXIT CABLE NUTRUNNERS
- 27 RIV NUTRUNNERS
- 28 HT SERIES DC TOOLS
- 29 HT SERIES DC ANGLE TOOLS
- 30 HT SERIES DC DUAL LEVER AND GEARHEAD TOOLS
- 31 HT SERIES NOSE EXTENSIONS
- 31 HT SERIES DC TOOL ACCESSORIES
- 32 DC TOOL / SPINDLE SELECTION GUIDE
- 34 CABLES AND ACCESSORIES
- 37 CORDLESS TOOLS
- 39 MULTIPLE NUTRUNNING SYSTEMS
- 40 UA-MC SERIES
- 41 UA-AMC SERIES
- 42 UEC-4800 CONTROLLERS
- 45 UEP-MC SERIES
- 46 UECD-4800 CONTROLLERS
- 48 UDP-MC / ACRA-PULSE MC SERIES
- 49 UECP-4800 CONTROLLERS
- 50 CONTROLLED PULSE TOOL ACCESSORIES
- 51 FIXTURED F-SERIES NUTRUNNERS
- 55 TORQUE MEASUREMENT OVERVIEW
- 58 TORQUE MEASUREMENT SYSTEMS
- 59 TORQUE MEASUREMENT TESTERS
- 62 TORQUE MEASUREMENT ANALYZERS
- 65 TOOL MANAGER / AUDIT MANAGER SOFTWARE
- 66 HIGH-CAPACITY TEST STANDS
- 71 TORQUE WRENCHES
- 78 TORQUE CARTS
- 79 DATA COLLECTION SOFTWARE
- 80 TRANSDUCERS
- 84 TORQUE MEASUREMENT CABLES
- 85 ACRADYNE HT SERIES PNEUMATIC TOOLS
- 86 ACRADYNE HIGH-SPEED SERIES HT PNEUMATIC TOOLS
- 87 ACRADYNE HT SERIES PNEUMATIC TOOL ACCESSORIES
- 88 AIMCO PULSE TOOLS: OVERVIEW
- 90 OMEGA PULSE: UAT SERIES
- 92 OMEGA PULSE: UL / ULT SERIES
- 93 SERIES
- 96 UDBP PULSE SERIES CORDLESS TOOLS
- 98 UDP-TA DIRECT PLUG-IN PULSE TOOLS
- 99 UAN & URW SERIES NUTRUNNERS
- 100 TUBENUT & GEARED NUTRUNNERS
- 101 DYNATORQUE MANUAL TORQUE MULTIPLIERS
- 102 US-LT PNEUMATIC SCREWDRIVERS
- 104 US & US-LD PNEUMATIC SCREWDRIVERS
- 105 SIGNATURE SERIES SHUT-OFF IMPACT CORDLESS TOOLS
- 106 SIGNATURE SERIES PRECISION CLUTCH CORDLESS TOOLS
- 109 SERIES ELECTRIC SCREWDRIVERS
- 112 IMPACT TOOLS
- 114 GRINDERS
- 115 SANDERS & DRILLS
- 116 PERCUSSION TOOLS
- 117 SCREW PRESENTERS: OVERVIEW
- 118 A-50 SCREW PRESENTERS
- 119 ACRA-FEED AUTOMATIC SCREW FEED SYSTEMS
- 120 GRAVITY DEFYING BALANCERS
- 121 LINE REEL BALANCERS / RETRACTORS
- 122 TOOL SUPPORT SYSTEMS
- 123 CUSTOM REACTION DEVICES
- 123 ACCESSORIES / LINEAR ARM
- 124 GCI TORQUE REACTION ARMS
- 126 CARBON TORQUE ARMS / TUBES
- 128 WORKSTATION COMPONENTS AND ASSEMBLIES
- 130 AIR PREPARATION UNITS
- 131 AIR LINE
- 132 AIR LINE ACCESSORIES
- 133 STANDARD FASTENER TOOLS
- 138 CUSTOM / SPECIAL PARTS
- 142 CONVERSION CHARTS