BP652N_IM - Omron Healthcare

BP652N_IM - Omron Healthcare
INSTRUCTION MANUAL
Wrist Blood
Pressure Monitor
ENGLISH
ESPAÑOL
Model BP652
TABLE OF CONTENTS
Before using the monitor
Introduction........................................................................................................3
Safety information .............................................................................................4
Intended use ................................................................................................4
Operating the device ...................................................................................4
Care and maintenance.................................................................................5
Operating instructions
BBefore taking a measurement..........................................................................6
Know your unit ..................................................................................................7
Unit display........................................................................................................8
Display symbols.................................................................................................9
Heartbeat symbol .......................................................................................9
Average value symbol ................................................................................9
Irregular heartbeat symbol..........................................................................9
Movement error symbol .............................................................................9
Battery installation...........................................................................................11
Battery replacement ..................................................................................12
Setting the date and time..................................................................................13
Applying the arm cuff......................................................................................15
Applying the cuff on the left wrist............................................................15
Applying the cuff on the right wrist .........................................................16
Taking a measurement .....................................................................................17
Using the memory function .............................................................................22
Averaging function ...................................................................................22
To display your readings ..........................................................................22
To delete all readings stored in the memory.............................................23
Care and maintenance......................................................................................24
Error indicators ................................................................................................25
Troubleshooting tips ........................................................................................26
FCC statement..................................................................................................27
Limited warranty..............................................................................................28
Specifications...................................................................................................29
Guidance and manufacturer’s declaration .......................................................31
2
INTRODUCTION
Thank you for purchasing the OMRON BP652 Wrist Blood Pressure Monitor.
Fill in for future reference.
DATE PURCHASED: __________________
SERIAL NUMBER: ____________________
• Staple your purchase receipt here
• Register your product on-line at
www.register-omron.com
The monitor is compact and easy-to-use at home, at work, and during travel.
Perfect for people who frequently monitor their own blood pressure.
Your new digital blood pressure monitor uses the oscillometric method of blood
pressure measurement. This means the monitor detects your blood’s movement
through your brachial artery and converts the movements into a digital reading. An
oscillometric monitor does not need a stethoscope so the monitor is simple to use.
Clinical research has proven a direct relationship between blood pressure in the
wrist and blood pressure in the arm. Changes in wrist blood pressure reflect
changes in arm blood pressure because the arteries in the wrist and the arm are
close to each other. Frequently measuring the blood pressure in your wrist will
provide your physician with an accurate indication of changes in your blood
pressure.
The BP652 comes with the following components:
• Monitor
• Storage Case
• 2 “AAA” Alkaline Batteries
• Instruction Manual
• Quick Start Guide
Please read this instruction manual thoroughly before using the unit. Please
keep for future reference. For specific information about your own blood
pressure, CONSULT YOUR PHYSICIAN.
SAVE THESE INSTRUCTIONS
3
SAFETY INFORMATION
INTENDED USE
The device is a digital monitor intended for use in measuring blood pressure and
pulse rate in adult patient population with wrist circumference ranging from 5 1/4
inches to 8 1/2 inches (13.5 cm to 21.5 cm). The device detects the appearance of
irregular heartbeats during measurement and gives a warning signal with readings.
SAFETY SYMBOLS USED IN THIS INSTRUCTION MANUAL
Indicates a potentially hazardous situation which, if not
WARNING avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury to the user or
CAUTION
patient or damage to the equipment or other property.
OPERATING THE DEVICE
Consult your physician for specific information about your blood pressure.
Self-diagnosis and treatment using readings may be dangerous. Follow the
instructions of your physician or licensed healthcare provider.
DO NOT adjust medication based on readings from this blood pressure monitor.
Take medication as prescribed by your physician. Only a physician is qualified to
diagnose and treat High Blood Pressure.
The monitor is not intended to be a diagnostic device.
Consult your physician before using the device for any of the following conditions:
common arrhythmias such as atrial or ventricular premature beats or atrial
fibrillation, arterial sclerosis, poor perfusion, diabetes, age, pregnancy,
pre-eclampsia, renal diseases.
Note that PATIENT motion, trembling, shivering may affect the reading.
If battery fluid should get in your eyes, immediately rinse with plenty of clean
water. Consult a physician immediately.
Keep the batteries out of reach of young children.
Do not use the device on the injured wrist or the wrist under medical treatment.
Consult your physician before using the device on the arm with an arterio-venous
(A-V) shunt.
Do not use the device with other medical electrical (ME) equipment simultaneously.
4
SAFETY INFORMATION
Do not use the device in the area the HF surgical equipment, MRI, or CT scanner
exists, or in the oxygen rich environment.
Consult your physician before using the device for any of the following conditions:
• If you have had a mastectomy.
• Do not take measurements more than necessary. It may cause bruising due to
blood flow interference.
• People with severe blood flow problems or blood disorders as cuff inflation can
cause bruising.
If you have a condition that may compromise circulation, you may get an inaccurate
reading with this device. Consult your physician before using this device.
Read all of the information in the instruction manual and any other literature in the
box before operating the unit.
Do not use this device on infants or persons who cannot express their intentions.
Operate the device only as intended. Do not use the device for any other purpose.
Dispose of the device, components and optional accessories according to applicable
local regulations. Unlawful disposal may cause environmental pollution.
Do not use a mobile phone near the device. It may result in an operational failure.
Use only Omron authorized parts and accessories. Parts and accessories not
approved for use with the device may damage the unit.
Use only 1.5V Alkaline batteries with this device. Do not use other types of
batteries. This may damage the device.
Do not use in a location with moisture, or a location where water may splash on the
unit. This may damage the device.
CARE AND MAINTENANCE
Do not subject the monitor to strong shocks, such as dropping the unit on the
floor.
Do not submerge the device or any of the components in water.
Store the device and the components in a clean, safe location.
Changes or modification not approved by the manufacturer will void the user
warranty. Do not disassemble or attempt to repair the unit or components.
Do not use the device outside the specified environment. It may cause an
inaccurate reading.
5
BEFORE TAKING A MEASUREMENT
To ensure a reliable reading, follow these recommendations:
1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes
before taking a measurement. Rest for at least 5 minutes before taking the
measurement.
2. Stress raises blood pressure. Avoid taking measurements during stressful times.
3. The cuff can be applied to your left or right wrist.
4. Measurements should be taken in a quiet place.
5. Position the unit at heart level throughout the measurement.
6. Remain still and do not talk during the measurement.
7. Keep a record of your blood pressure and pulse readings for your physician. A
single measurement does not provide an accurate indication of your true blood
pressure. You need to take and record several readings over a period of time.
Try to measure your blood pressure at the same time each day for consistency.
6
KNOW YOUR UNIT
Main Unit:
Wrist cuff
Memory button
Battery
compartment
START/STOP button
Display
Date/Time setting
( ) button
Date/Time setting
( ) button
Components:
EN
ES
INSTRUCTION MANUAL
GETTING
STARTED
Wrist Blood
Pressure Monitor
Model BP652
1883330-6A
INTRODUCTION
Wrist Blood Pressure Monitor
Thank you for purchasing the OMRON BP652 Wrist Blood Pressure Monitor.
Fill in for future reference.
DATE PURCHASED: __________________
SERIAL NUMBER: ____________________
• Staple your purchase receipt here
• Register your product on-line at
www.register-omron.com
2 “AAA”
Alkaline Batteries
The monitor is compact and easy-to-use at home, at work, and during travel.
Perfect for people who frequently monitor their own blood pressure.
Your new digital blood pressure monitor uses the oscillometric method of blood
pressure measurement. This means the monitor detects your blood’s movement
through your brachial artery and converts the movements into a digital reading. An
oscillometric monitor does not need a stethoscope so the monitor is simple to use.
Clinical research has proven a direct relationship between blood pressure in the
wrist and blood pressure in the arm. Changes in wrist blood pressure reflect
changes in arm blood pressure because the arteries in the wrist and the arm are
close to each other. Frequently measuring the blood pressure in your wrist will
provide your physician with an accurate indication of changes in your blood
pressure.
The BP652 comes with the following components:
• Monitor
• Storage Case
• 2 “AAA” Alkaline Batteries
• Instruction Manual printed in English and Spanish
• Quick Start Guide
Please read this instruction manual thoroughly before using the unit. Please
keep for future reference. For specific information about your own blood
pressure, CONSULT YOUR PHYSICIAN.
Instruction
Manual
Storage
Case
7
5337790-9A
BP652
Quick Start
Guide
UNIT DISPLAY
Date/Time display
Blood pressure level indicator (bar)
Average reading symbol
Positioning symbol
Memory symbol
Systolic blood pressure
Positioning indicator
Diastolic blood pressure
Low battery symbol
Heartbeat symbol
(Flashes during
measurement)
Pulse display /
Memory number
Irregular heartbeat
symbol
Movement error
symbol
Deflation symbol
8
DISPLAY SYMBOLS
HEARTBEAT SYMBOL (
)
The Heartbeat symbol flashes on the display at every heartbeat during the
measurement.
AVERAGE READING SYMBOL (
)
The Average Reading Symbol is displayed when you press the Memory
button ( ). The most recent average reading appears on the display screen.
IRREGULAR HEARTBEAT SYMBOL (
)
When the monitor detects an irregular rhythm two or more times during the
measurement, the Irregular Heartbeat Symbol will appear on the display with the
readings.
An irregular heartbeat rhythm is defined as a
Normal Heartbeat
rhythm that varies by less than 25% from the
Pulse
average rhythm or 25% more than the
Blood
average rhythm detected while the monitor is
pressure
measuring the systolic and diastolic blood
pressure.
Irregular Heartbeat
If the irregular heartbeat symbol displays with
Short Long
your readings, we recommend you consult your
Pulse
physician. Follow the directions of your
Blood
physician.
pressure
MOVEMENT ERROR SYMBOL (
)
The Movement Error Symbol ( ) is displayed if you move your body during the
measurement. Please remove the wrist cuff, and wait 2-3 minutes. Reapply the
wrist cuff and take another measurement.
9
DISPLAY SYMBOLS
2013 ESH/ESC Guidelines for the management of arterial hypertension
Definitions of hypertension by office and home blood pressure levels
Office
Home
Systolic Blood Pressure
≥ 140 mmHg
≥ 135 mmHg
Diastolic Blood Pressure
≥ 90 mmHg
≥ 85 mmHg
These are from statistical values for blood pressure.
WARNING
Consult your physician for specific information about your blood
pressure. Self-diagnosis and treatment using readings may be
dangerous. Follow the instructions of your physician or licensed
healthcare provider.
10
BATTERY INSTALLATION
CAUTION
Use only 1.5V “AAA” alkaline batteries with this device.
1. Press the hook of the battery cover and pull
downward.
2. Install 2 “AAA” size batteries so the +
(positive) and - (negative) polarities match the
polarities of the battery compartment as
indicated.
3. Replace the battery cover.
NOTE: Make sure that the battery cover is
securely in position.
11
BATTERY INSTALLATION
BATTERY REPLACEMENT
Low battery symbol
When the Low battery symbol appears on the display, turn the monitor off and
remove all the batteries. Replace with 2 new batteries at the same time.
WARNING
If battery fluid should get in your eyes, immediately rinse with plenty
of clean water. Consult a physician immediately.
WARNING
Keep the batteries out of reach of young children.
NOTES: • Turn the unit off before replacing the batteries. If the batteries are
removed while the unit is still on, the date and time will be reset to
that of the previous use. The readings are not deleted.
• When the batteries are replaced, you may need to reset the date and
time. Refer to “Setting the Date and Time”.
• The batteries included with the device may have a shorter life.
CAUTION
Dispose of the device, components and optional accessories
according to applicable local regulations. Unlawful disposal may
cause environmental pollution.
12
SETTING THE DATE AND TIME
Set the monitor to the current date and time before taking a measurement for the
first time or after replacing the batteries.
1. TO START THE SETTING
Press the Date/Time Setting button (
to adjust the date and time.
The year flashes on the display.
)
2. SETTING THE YEAR
Press the Date/Time Setting button (
to advance by one year.
Press the Date/Time Setting button (
to set the current year.
)
)
The month flashes on the display.
NOTES: • The year can be set between
2015 and 2040. When the
display reaches 2040, it will
return to 2015.
• Press and hold the (
)
button to increase the date
and time values faster.
3. SETTING THE MONTH
Press the Date/Time Setting button (
to advance by one month.
Press the Date/Time Setting button (
to set the current month.
)
)
The day flashes on the display.
13
SETTING THE DATE AND TIME
4. SETTING THE DAY
Press the Date/Time Setting button (
to advance by one day.
Press the Date/Time Setting button (
to set the current day.
The hour flashes on the display.
5. SETTING THE HOUR
The time is set using AM or PM.
Press the Date/Time Setting button (
to advance by one hour.
Press the Date/Time Setting button (
to set the current hour.
The minute flashes on the display.
6. SETTING THE MINUTE
Press the Date/Time Setting button (
to advance by one minute.
Press the Date/Time Setting button (
to set the minute setting.
7. TO TURN THE MONITOR OFF
Press the START/STOP button.
14
)
)
)
)
)
)
APPLYING THE WRIST CUFF
CAUTION
Read all of the information in the instruction manual and any other
literature in the box before operating the unit.
CAUTION
This device is intended for use in measuring blood pressure and
pulse rate in the adult population. Do not use this device on infants
or persons who cannot express their intentions.
APPLYING THE CUFF ON THE LEFT WRIST
1. Roll up sleeve. Make sure your sleeve is not rolled up
too tightly on your arm. This may constrict the flow of
blood in your arm.
2. Put your arm through the cuff loop. Your palm
should face upward.
3. Position the cuff leaving a clearance of approximately 1/2
to 1 inch (1-2 cm) between the cuff and the bottom of
your palm.
15
APPLYING THE WRIST CUFF
4. Wrap the wrist cuff around your wrist. Do not
apply over clothing.
NOTES: • Make sure the wrist cuff does not cover the
protruding part of the wrist bone on the
outside of the wrist.
• If the wrist cuff comes off, re-assemble as shown in the figure.
APPLYING THE CUFF ON THE RIGHT WRIST
When taking a measurement using the right wrist position
the cuff as shown in the illustration.
16
TAKING A MEASUREMENT
1. Sit comfortably on a chair with your feet flat on the
floor and place your elbow on a table in order to relax
before starting blood pressure measurement.
NOTES: • The distance from the top of your seat
measuring to the top of the table you are sitting
at, should be 12±2 inches (30±5 cm). If the
distance measured between the top of your seat
and table do not fall within this parameter,
please correct your seat or table height. If you
are unable to make any seat or table
adjustments, please turn-off the position sensor
and position your wrist at heart-level by
yourself.
• The cuff must be approximately the same height
as your heart. If the cuff is too high above your
heart, your blood pressure will read artificially
low. If the cuff is too low below your heart, your
blood pressure will be artificially high.
• Relax your wrist and hand. Do not bend your
wrist back, clench your fist, or bend your wrist
forward.
17
TAKING A MEASUREMENT
SETTING THE POSITIONING SENSOR
Press and hold the
button to reset the Positioning
sensor. The Positioning sensor is set “on” as default.
Press the START/STOP button to store the new
setting.
2. Press the START/STOP button.
All symbols appear on the display.
Heart Zone Guidance-The monitor has a built-in Positioning sensor that is
used as an aid in determining if the monitor is at the correct height. It has been
designed to work with most people so that when your wrist is at the correct
position relative to your heart, the Positioning indicator will be blue. If the
Positioning indicator changes to orange, the device may not be at the correct
height relative to your heart. Due to difference in individual size and physique,
this feature may not helpful in all cases and you may wish to turn off this
feature. If you feel the position of the wrist according to positioning sensor's
guidance does NOT match your heart level, please turn off this feature and
follow your judgement. It can be disabled, see “Setting the Positioning Sensor”
below.
18
TAKING A MEASUREMENT
NOTE: Even if the device is not positioned properly and the Positioning
indicator is orange, after 5 seconds the monitor will start the
measurement and the wrist cuff will start to inflate.
(Proper position)
(Wrist is too high)
(Wrist is too low)
19
(Forward-bent posture)
TAKING A MEASUREMENT
As the cuff inflates, the monitor automatically determines your ideal inflation
level. This monitor detects your blood pressure and pulse rate during inflation.
The Heartbeat Symbol ( ) flashes at every heartbeat.
Remain still and do not move until the entire measurement process is
completed.
NOTE: To stop the inflation or measurement, push the START/STOP button.
The monitor will stop inflating, start deflating, and will turn off.
3. After the monitor has detected your blood pressure and
pulse rate, the cuff automatically deflates. Your blood
pressure and pulse rate are displayed.
4. Press the START/STOP button to turn the monitor off.
NOTES: • The monitor will automatically turn off after two minutes.
• Wait 2-3 minutes between measurements. The wait time allows the
arteries to return to the condition prior to taking the blood pressure
measurement. You may need to increase the wait time depending on
your individual physiological characteristics.
20
TAKING A MEASUREMENT
WARNING
Consult your physician for specific information about your blood
pressure. Self-diagnosis and treatment using readings may be
dangerous. Follow the instructions of your physician or licensed
healthcare provider.
WARNING
DO NOT adjust medication based on readings from this blood
pressure monitor. Take medication as prescribed by your physician.
Only a physician is qualified to diagnose and treat High Blood
Pressure.
WARNING
The monitor is not intended to be a diagnostic device.
21
USING THE MEMORY FUNCTION
Every time you complete a measurement, the monitor stores the blood pressure
and pulse rate in the memory. The monitor automatically stores up to 100 readings
(blood pressure and pulse rate). When 100 readings are stored, the oldest record is
deleted to save the most recent readings.
AVERAGING FUNCTION
The monitor calculates the average reading based on up to the three most recent
readings taken within 10 minutes.
NOTE: If two readings are stored in the memory for the 10 minute period, the
average is based on the two readings. If only one reading is stored, this is
displayed as the average.
TO DISPLAY YOUR READINGS
1. Press the Memory button ( ) to display the average reading based on the
three most recent readings taken within 10 minutes. The Average Reading
Symbol ( ) appears on the display when the average reading is shown.
2. Press the Memory button (
the oldest.
) to display the readings from the most recent to
Alternating date/time
display
22
USING THE MEMORY FUNCTION
NOTES: • The Memory number appears for a second before the pulse rate is
displayed. The newest set is number “1”.
• If the Positioning indicator is set to “on” before the measurement, the
Positioning indicator is displayed with the readings.
• The date and time are alternately displayed with the readings.
• Press the Memory button ( ) repeatedly to display the next
readings.
• Press and hold the Memory button ( ) to display the readings
faster.
3. Press the START/STOP button to turn the monitor off.
TO DELETE ALL READINGS STORED IN THE MEMORY
You cannot partially delete readings stored in the memory. All readings will be
deleted.
1. Press the Memory button (
) to turn the monitor on.
2. While holding the Memory button ( ), press the START/STOP button down
for more than 2 seconds until the display appears as it does in the following
illustration.
3. Press the START/STOP button to turn the monitor off.
NOTE: The monitor will automatically turn off after two minutes.
23
CARE AND MAINTENANCE
To keep your digital blood pressure monitor in the best condition and protect the
unit from damage, follow the directions listed below:
Do not forcefully bend the cuff. Do not fold tightly.
Clean the monitor with a soft dry cloth.
Do not use any abrasive or volatile cleaners.
Wipe clean on the surface of the cuff with a soft, moistened cloth with a
dilution of neutral detergent.
Do not allow any liquids inside the cuff. If a liquid gets in the cuff, dry
the inside well.
CAUTION
Do not submerge the device or any of the components in water. Do not
subject the monitor to extreme hot or cold temperatures, humidity or direct
sunlight.
CAUTION
Store the device and the components in a clean, safe location.
CAUTION
Do not subject the monitor to strong shocks, such as dropping the unit on the
floor.
Remove the batteries if the unit will not be used for three months or longer.
Always replace all the batteries with new ones at the same time.
Use the unit in a manner consistent with the instructions provided in this
manual.
CAUTION
Use only OMRON authorized parts and accessories. Parts and
accessories not approved for use with the device may damage the unit.
CAUTION
Changes or modification not approved by the manufacturer will void the
user warranty. Do not disassemble or attempt to repair the unit or
components.
24
ERROR INDICATORS
SYMBOL
CAUSE
CORRECTION
Wrist cuff not applied
correctly.
Apply the wrist cuff correctly. Refer to
“Applying the Wrist Cuff”.
Movement during
measurement.
Do not hold the wrist cuff. Remain still
and do not talk during measurement.
Refer to “Taking a Measurement”.
Wrist cuff not applied
correctly or movement
during measurement.
Apply the wrist cuff correctly. Refer to
“Applying the Wrist Cuff”.
Remain still and do not talk during
measurement. Refer to “Taking a
Measurement”.
Arm position changed
during measurement.
Remain still until the measurement is
complete. Refer to “Taking a
Measurement”.
Device error.
Contact Customer Service.
Batteries are low.
Replace the two batteries.
Refer to “Battery Installation”.
25
TROUBLESHOOTING TIPS
PROBLEM
CAUSES AND SOLUTIONS
Replace both batteries with new ones at the
No power.
No display appears on the unit. same time. Check the battery installation for
proper placement of the battery polarities.
Review the section “Battery Installation”.
Readings appear too high or
too low.
Blood pressure varies constantly. Many factors
including stress, time of day, how you wrap the
cuff, where you position your wrist, may affect
your blood pressure.
Review the sections “Before Taking a
Measurement” and “Taking a Measurement”.
26
FCC STATEMENT
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
27
LIMITED WARRANTY
Your BP652N Wrist Blood Pressure Monitor, excluding the batteries, is warranted
to be free from defects in materials and workmanship appearing within 5 years
from the date of purchase, when used in accordance with the instructions provided
with the monitor. The above warranty extends only to the original retail purchaser.
We will, at our option, replace without charge any monitor covered by the above
warranty. Replacement is our only responsibility and your only remedy under the
above warranty.
To obtain warranty service contact Customer Service by calling 1-800-634-4350
for the address of the inspection center and the return shipping and handling fee.
Enclose the Proof of Purchase. Include a letter, with your name, address, phone
number, and description of the specific problem. Pack the product carefully to
prevent damage in transit. Because of possible loss in transit, we recommend
insuring the product with return receipt requested.
THE FOREGOING IS THE SOLE WARRANTY PROVIDED BY OMRON IN
CONNECTION WITH THIS PRODUCT, AND OMRON HEREBY
DISCLAIMS ANY OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IMPLIED WARRANTIES AND
OTHER TERMS THAT MAY BE IMPOSED BY LAW, IF ANY, ARE
LIMITED IN DURATION TO THE PERIOD OF THE ABOVE EXPRESS
WARRANTY.
OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER
SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT COSTS,
EXPENSES OR DAMAGES.
This warranty provides you with specific legal rights, and you may have other
rights which vary from state to state. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
Visit our web site at:
Call toll free:
FOR CUSTOMER SERVICE
www.omronhealthcare.com
1-800-634-4350
28
SPECIFICATIONS
BP652N
HEM-6300-Z
LCD Digital Display
Pressure: 0 to 299 mmHg, Pulse: 40 to 180 beats/min.
Pressure: ±3mmHg or 2% of reading
Pulse: ±5% of reading
Automatic by electric pump
Inflation:
Automatic rapid deflation
Deflation:
Measurement Method: Oscillometric method
2 “AAA” alkaline batteries 1.5V
Power Source:
Approximately 300 uses with 2 new alkaline batteries
Battery Life:
Operating Temperature 50ºF to 104ºF (10ºC to 40ºC) /15 to 85% RH
/Humidity:
Storage Temperature -4ºF to 140ºF (-20ºC to 60ºC) /10 to 95% RH
/Humidity/Air Pressure: 700-1060 hPa
Approximately 2 7/8 oz. (80g)
Main Unit Weight:
not including batteries
Main Unit Dimensions: Approximately 3 1/2''(w) × 2 3/8''(l) × 1/2''(d)
(89 mm × 61 mm × 13 mm) (not including the wrist cuff)
Approximately 5 1/4" to 8 1/2" (13.5 to 21.5 cm)
Measurable
circumference of wrist:
Up to 100 readings
Memory:
Main Unit, Storage Case, 2 “AAA” Alkaline Batteries,
Contents:
Instruction Manual, and Quick Start Guide
Applied part:
Model:
Display:
Measurement Range:
Accuracy:
Protection against
electric shock:
Internally powered ME equipment
29
SPECIFICATIONS
NOTES: • These specifications are subject to change without notice.
• In the clinical validation study, the 5th phase was used on 85 subjects
for determination of diastolic blood pressure.
• This device has not been validated for use in pregnancy.
30
GUIDANCE AND MANUFACTURER’S DECLARATION
OMRON Wrist Blood Pressure Monitor (BPM)
Information for accompanying documents in the scope of IEC60601-1-2:2007
Important information regarding Electro Magnetic Compatibility (EMC)
With the increased number of electronic devices such as PC’s and mobile
(cellular) telephones, medical devices in use may be susceptible to
electromagnetic interference from other devices. Electromagnetic interference
may result in incorrect operation of the medical device and create a potentially
unsafe situation. Medical devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electro Magnetic Compatibility) with the aim to prevent unsafe product situations, the IEC60601-1-2
standard has been implemented. This standard defines the levels of immunity
to electromagnetic interferences as well as maximum levels of electromagnetic
emissions for medical devices.
Medical devices manufactured by OMRON Healthcare conform to this
IEC60601-1-2:2007 standard for both immunity and emissions.
Nevertheless, special precautions need to be observed:
• The use of accessories and cables other than those specified by OMRON,
with the exception of cables sold by OMRON as replacement parts for
internal components, may result in increased emission or decreased
immunity of the device.
• The medical devices should not be used adjacent to or stacked with other
equipment.
In case adjacent or stacked use is necessary, the medical device should be
observed to verify normal operation in the configuration in which it will be
used.
• Refer to further guidance below regarding the EMC environment in which
the device should be used.
• The MEDICAL ELECTRICAL EQUIPMENT BPM needs special
precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided in this documentations.
31
GUIDANCE AND MANUFACTURER’S DECLARATION
• The Essential Performance of the BPM is to measure a blood
pressure and a pulse rate and using the memory function.
The BPM may be interfered with by other equipment, even if that other
equipment complies with CISPR EMISSION requirements.
(Table 1)
Guidance and manufacturer’s declaration – electromagnetic emissions
OMRON BPM is intended for use in the electromagnetic environment
specified below. The customer or the user of this OMRON BPM should
assure that it is used in such environment.
Emissions test
Electromagnetic environment
– guidance
Compliance
RF emissions CISPR 11 Group 1
RF emissions CISPR 11 Class B
Harmonic emissions
IEC 61000-3-2
Not
Applicable.
Voltage fluctuations/
flicker emissions
IEC61000-3-3
Not
Applicable.
The OMRON BPM uses
RF energy only for its internal
function. Therefore, its RF emissions
are very low and are not likely to
cause any interference in nearby
electronic equipment.
The OMRON BPM
is suitable for use in all establishments,
including domestic establishments and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
32
GUIDANCE AND MANUFACTURER’S DECLARATION
(Table 2)
Guidance and manufacturer’s declaration – electromagnetic immunity
OMRON BPM is intended for use in the electromagnetic environment
specified below. The customer or the user of this OMRON BPM should
assure that it is used in such environment.
Immunity test
IEC 60601 Compliance
Test level
level
Electromagnetic environment
– guidance
Floor should be wood, concrete,
or ceramic tile. If f loors are
Electrostatic
±6 kV contact ±6 kV contact covered with synthetic material,
discharge (ESD)
±8 kV air
±8 kV air
the relative humidity should be
IEC 61000-4-2
at least 30 %.
Electrical fast
transient/burst
IEC 61000-4-4
Surge
IEC 61000-4-5
±2 kV for
power
supply lines
±1 kV for
input/output
lines
±1 kV
line(s) to
line(s)
±2 kV
line(s) to
earth
Not
Applicable.
Not Applicable.
Not
Applicable.
Not Applicable.
33
GUIDANCE AND MANUFACTURER’S DECLARATION
Immunity test
IEC 60601 Compliance
Test level
level
Electromagnetic environment
– guidance
<5 % UT
(>95 % dip
in UT)
for 0.5 cycle
Voltage dips,
short
interruptions
and voltage
variations on
power supply
inputlines
IEC 61000-4-11
40 % UT
(60 % dip in
UT)
for 5 cycles
Not
70 % UT
Applicable.
(30 % dip in
UT)
for 25 cycles
Not Applicable.
<5 % UT
(>95 % dip
in UT)
for 5 sec.
Power
frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m
Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical commercial
or hospital environment.
3 A/m
Note: UT is the A.C. mains voltage prior to application of the test level.
34
GUIDANCE AND MANUFACTURER’S DECLARATION
(Table 4)
Guidance and manufacturer’s declaration – electromagnetic immunity
OMRON BPM is intended for use in the electromagnetic environment
specified below. The customer or the user of this OMRON BPM should
assure that it is used in such environment.
Immunity test
IEC 60601 Compliance
Test level
level
Electromagnetic environment
– guidance
Portable and mobile RF
communications
equipment should be used no
closer to any part of
the OMRON BPM
including cables, than the
recommended separation
distance calculated from the
equation appropriate to the
frequency of the transmitter.
Conducted RF
IEC 61000-4-6
3 V rms
150 kHz to
80 MHz
Not
Applicable.
35
Recommend
separation distance
Not Applicable.
GUIDANCE AND MANUFACTURER’S DECLARATION
Immunity test
Radiated RF
IEC 61000-4-3
IEC 60601 Compliance
Test level
level
3 V/m
80 MHz to
2.5 GHz
Electromagnetic environment
– guidance
d = 1.2 P
80 MHz to 800 MHz
d = 2.3 P
800 MHz to 2.5 GHz
3 V/m
where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in meters (m).
Field strengths from fixed RF
transmitters as determined by an
electromagnetic site survey,a
should be less than the compliance level in each frequency
range.b
Interference may occur in the
vicinity of equipment marked
with the following symbol:
36
GUIDANCE AND MANUFACTURER’S DECLARATION
Note1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects, and people.
a
b
Field strengths from fixed transmitters, such as base stations for radio (cellular/
cordless) telephones and land mobile radio, AM and FM radio broadcast, and
TV broadcast cannot be predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF transmitters, an electromagnetic
site survey should be considered. If the measured field strength in the location
in which the OMRON BPM is used exceeds the applicable
RF compliance level above, the OMRON BPM should be observed to
verify normal operation. If abnormal performance is observed, additional
measures may be necessary, such as reorienting or relocating the OMRON
BPM.
Over the frequency range 150 kHz to 80 MHz, field strengths should be less
than 3 V/m.
37
GUIDANCE AND MANUFACTURER’S DECLARATION
(Table 6)
Recommended separation distance between portable and mobile RF
communications equipment and the OMRON BPM
OMRON BPM is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of this
OMRON BPM can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications
equipment (transmitters) and the OMRON BPM as recommended below,
according to the maximum output power of the communications equipment.
Output Power of Separation distance according to frequency of
transmitter in meter
Transmitter in
Watt
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5GHz
d = 2.3 P
d = 1.2 P
Not Applicable.
0.01
0.1
1
10
100
0.12
0.38
1.2
3.8
12
Not Applicable.
0.23
0.73
2.3
7.3
23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of2the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
Note: At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies
Note: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects, and people.
38
Manufactured for :
OMRON HEALTHCARE Co., Ltd.
Distributed by :
OMRON HEALTHCARE, INC.
1925 West Field Court
Lake Forest, IL 60045 U.S.A.
www.omronhealthcare.com
© 2014 OMRON HEALTHCARE, INC.
9701555-9A
Made in China
39
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement