2Wire AU2700 Owner's Manual

2Wire AU2700 Owner's Manual
OLYMPUS
DIAGNOSTIC SYSTEMS GROUP
AU2700 & AU5400
ON-LINE SPECIFICATIONS
-1-
AU2700/5400
Online Specifications
Issued: 2000.3.16
Revised: 2000.6.8
Olympus Optical Co., Ltd.
-2-
Table of contents
page
1. Outline..............................................................................................................................................................................................4
2. Basic Specification ...........................................................................................................................................................................5
2.1
Format of Transmission....................................................................................................................................................5
2.2
Transmission code ............................................................................................................................................................5
2.3
Text format .......................................................................................................................................................................6
3.Transmission Text Format.................................................................................................................................................................9
3.1
Common and changeable item..........................................................................................................................................9
3.2
T.R.I. inquiry text .............................................................................................................................................................9
3.3
T.R.I. text .......................................................................................................................................................................11
3.4
Test result transmission text ...........................................................................................................................................12
3.5
Relation between real-time/batch and Transmission text................................................................................................21
3.6
Others .............................................................................................................................................................................22
4. Transmission Protocols ..................................................................................................................................................................30
4.1
Protocols at AU2700/5400 .............................................................................................................................................30
4.2
Timing/time-out..............................................................................................................................................................33
4.3
Rule of class B................................................................................................................................................................35
5.Application Protocol .......................................................................................................................................................................37
5.1
Receiving T.R.I. .............................................................................................................................................................37
5.2
Sending test result protocol ............................................................................................................................................40
5.3
Others .............................................................................................................................................................................42
6. Specification of Connection ...........................................................................................................................................................43
6.1
In/Output signals and Terminals.....................................................................................................................................43
6.2
Signal Level....................................................................................................................................................................43
6.3
Applicable Connector .....................................................................................................................................................43
6.4
others ..............................................................................................................................................................................43
A. Appendix…………………………………………………………………………………………………………………..44
1. Flags list ...............................................................................................................................................................................44
2. Online parameters list...........................................................................................................................................................46
3. Character table......................................................................................................................................................................49
4. Online parameter sheet ........................................................................................................................................................50
5. Online alarm list ...................................................................................................................................................................52
-3-
1. Outline
1) The following data is exchanged between the AU2700/5400 and the host computer system.
(1) Test Requisition Information (T.R.I.)
(2) Test Results
2) The data transmission is conducted in either of the following mode:
(1) Class A Transmission is without synchronizing with analysis. This mode does not utilize the ACK/NAK protocol.
(2) Class B Transmission is synchronizing with analysis. This mode does utilize the ACK/NAK protocol.
3) The Following format and protocol can be selected by [PARAMETER] [ONLINE] menu.
(1) Setup
(2) Communication protocol
A. T.R.I. Inquiry Text Format
B. Test Result Text Format
(3) Test Number Assignment
2. Basic Specification
-4-
(2.1)
Format of Transmission
Item
Transmission
line
Synchronization
Contents
RS-232C
Data transmission
mode
Bit/sec
Configuration
Half-Duplex
Synchronization
4800bps, 9600bps
start bit
data bit
parity bit
stop bit
total
1 bit
7 or 8 bit
none, odd or even
1 or 2 bit
9-12 bit
These can be selected by [PARAMETER] [ONLINE] [PROTOCOL]
menu.
Form of
Transmission
Use channel
Retry
(2.2)
Class A Transmission are conducted from the sender to
the receiver in a certain time of interval.
Class B Transmission are conducted by confirming with ACK
(receipt acknowledged)or NAK (not acknowledged)
between the sender and the receiver.
1 channel
Class A: None
Class B: 0-3 This can be selected by [PARAMETER] [ONLINE]
[PROTOCOL]menu.
Transmission code
Item
Data code
Contents
7 bit code ASCII CODE
Limit of value
20H-7EH
8 bit code
These can be
selected by
[PARAMETER]
[ONLINE]
[PROTOCOL]
menu.
1 byte code
Control code
20H-7EH
A1H-DFH
01H-1FH
06H
15H
00H-FFH
Start code/terminate code
ACK
NAK
BCC
-5-
(2.3)
Text format
(1) Basic configuration as follows:
1) 2) 3)
4)
Name
1) Text start code
2) Text
Classification
Digit
1,2
2
Contents
01h-1Fh
R#
RB
R_ *
RH
RE
S#
S_ *
SH
SE
D#
DB
D_ *
DH
DR
DA
d_ *
dH
DQ
DE
3) Unit No.
5)
6)
Data start code
T.R.I. inquiry
Start of T.R.I. inquiry
T.R.I. inquiry of
normal sample
T.R.I. inquiry of
rerun sample
End of T.R.I. inquiry
T.R.I.
T.R.I. of normal sample
T.R.I. of rerun sample
Stop of T.R.I. inquiry
Test result
Start of transfer result
Normal sample result
Rerun sample result
Reagent blank sample
Result
Calibration result
Stat fast result(AU2700 Only)
Emergency fast result
(AU5400 Only)
Stat fast rerun result
(AU2700 Only)
Emergency fast rerun result
(AU5400 Only)
QC sample result
End of result transfer
0,2
Remarks
Normally 02h
AU2700/5400
→ Host
Host
→ AU2700/5400
AU2700/5400
→ Host
[PARAMETER]
[ONLINE] [PROTOCOL]
menu.
(Optional)
4) Text code
Contents of Text
Data No. is added behind
text of Header parts.
5) text end code
1,2
01h-1Fh
End of text code
6) BCC
(Block Check
Character)
1
00h-FFh
The sum with the Exclusive
or logic between 2-5 and including
5.
(Optional)
remarks * _ is space.
-6-
[PARAMETER]
[ONLINE] [PROTOCOL]
menu.
[PARAMETER]
[ONLINE] [PROTOCOL]
menu.
[PARAMETER]
[ONLINE] [PROTOCOL]
menu.
(2) Blocking
A. Definition of Term
1)
2)
3)
4)
Term
Text length
5)
6)
Definition
Is the total number of bytes from 1) to 6).
[PARAMETER]
[ONLINE]
[PROTOCOL] menu.
Max block
length
[PARAMETER]
[ONLINE]
[PROTOCOL] menu.
It is the Max length of text in one record.
The length of block can be selected in online parameter menu.
(256, 512, 1024)
-7-
B. Kind of text and blocking
Kind
Fixed length
Text
Variable
length text
Kind of text
• Start of T.R.I. inquiry
• T.R.I. inquiry text
• End of T.R.I.
transmission text.
• Stop of T.R.I. inquiry
• Start of transfer result
transmission text.
• End of result transfer
transmission text.
• T.R.I. text
• Rerun T.R.I. text
• Test result text
• Rerun result text
• QC result text
• Acal result text
• Reagent blank result
text
• STAT(fast) result text
(AU2700 only)
• Emergency(fast) result
text
(AU5400 only)
Method of Blocking
Non-blocking
Using
blocking
Max block length
< text length
Block
Identification
No.
(0-9,E)
first block
Block
Identification No. =0
second block
(see page 9)
Block
Identification No. =1
•
•
Text end
code
last block
Block
Identification No. =E
Text end code = ETX(03H)
and using ETB = yes *1
End of block = ETB
End of text = ETX
Text end code <>ETX(03H)
or ETB(17h)is no-use *1
End of block is
designated in menu.
End of text is
designated in menu.
Using ETB can be selected
in online parameters.
Remark *1:When Block Identification No. is numeric(0,1,....), Only “End of Block” is used.
When Block Identification No. is “E”, Only “End of Text” is used.
-8-
3. Transmission Text Format
(3.1)
Common and changeable item
The following can be selected by [PARAMETER] [ONLINE] [PROTOCOL] menu.
Text start code
1)
Unit No.
3)
Common Item
Text end code
5)
BCC
6)
Sample Type
Dummy(in Test Result transmission Text)
Block Identification No.
Rack No./Cup Position
Unit No. on the T.R.I. text (with out Rerun)
ANL unit No. and Cuvette side on Test Result transmission Text (without RB,ACAL,QC)
Space Code before the Text Classification (S,R,D text)
Reagent Lot No. and bottle No.
The order of the Sample number and Sample ID on the text can be changed, the sample type, the Dummy spaces and
the Block Identification Number can be changed in the [PARAMETER] [ONLINE] [PROTOCOL] menu. There is a
function at the bottom of the page called “Special”. These features may be altered under the “Special” menu.
Making changes in the “Special” menu only affects the T.R.I. Text and Test Result Transmission Text.
(3.2)
T.R.I. inquiry text
(1) Start text to inquiry test requisition.
1) R B
3) 5) 6)
(2) Normal run inquiry test requisition.
1) R
_ 3)
Rack no.
Cup
Position
Sample no.
Sample type
-9-
Sample ID
5) 6)
(3) Repeat run inquiry test requisition.
1) R H 3)
Rack No.
Cup
Position
Sample no.
Sample type
(4) End text to inquiry test requisition.
1) R E 3) 5) 6)
- 10 -
Sample ID
5) 6)
(3.3)
T.R.I. text
(1) Normal sample test requisition information text.
1) S _
Rack No.
cup
position
Sample no.
Sample ID
_
Sample type
s
e
x
age
month
Patient
Information 4
Test
code
Test
code
Test
code
Patient
Information 2
Patient
Information 5
Patient
Information 6
Test
code
Test
code
_
Block Identification No.
Patient
Information 1
Test
code
Dummy
_ _
Test
code
Patient
Information 3
Test
code
5) 6)
(2) Repeat run sample test requisition information text.
1) S H
Rack no.
Cup
Position
Sample no.
Sample ID
Sample type
Original
Sample no.
Block Identification No.
Blocking
Test
code
Me Test
th code
od
Me Test
th code
od
Me Test
th code
od
- 11 -
Me
th
od
Test
code
Me
th 5)
od
6)
(3) End of T.R.I. Text transmission.
1) S E 5) 6)
(3.4)
Test result transmission text
(1) Start of test result transmission text.
1) D B 3) 5) 6)
- 12 -
(2) Normal sample test result text.
1) D
_ 3)
Cup
Position
Rack no.
Sample no.
Sample ID
Sample type
S
e
x
Age
Month
Patient
Information 4
Patient
Information 2
Patient
Information 5
Patient
Information 6
Blocking
R1 Bottle
No.
R2 Lot No.
R2 Bottle
No.
Cuvette side
ANL unit No.
Blocking
Test Result
Flags
5) 6)
- 13 -
_
Block Identification No.
Patient
Information 1
Test
code R1 Lot No.
Dummy
_ _ _
Patient
Information 3
(3) Stat(fast) test result text (AU2700 only).
1) d
_ 3)
Cup
Rack no.
Posi_ _ _ _ tion
1-22
S
e
x
Age
Month
Patient
Information 4
P n n n
Sample no.
Sample ID
Sample type
Patient
Information 2
Patient
Information 5
Patient
Information 6
Blocking
R1 Bottle
No.
R2 Lot No.
R2 Bottle
No.
Cuvette side
ANL unit No.
Blocking
Test Result
Flags
5) 6)
- 14 -
_
Block Identification No.
Patient
Information 1
Test
code R1 Lot No.
Dummy
_ _ _
Patient
Information 3
(4) Emergency(fast) test result text (AU2700 only).
1) d _
3)
Cup
Rack no.
Posi_ _ _ _ tion
1-22
S
e
x
Age
Month
Patient
Information 4
E n n n
Sample no.
Sample ID
Sample type
Patient
Information 2
Patient
Information 5
Patient
Information 6
Blocking
R1 Bottle
No.
R2 Lot No.
R2 Bottle
No.
Cuvette side
ANL unit No.
Blocking
Test result
Flags
5) 6)
- 15 -
_
Block Identification No.
Patient
Information 1
Test
code R1 Lot No.
Dummy
_ _ _
Patient
Information 3
(5) Repeat run result text -1 .
1) D H 3)
Rack no.
Cup
Position
Sample no.
Sample ID
Sample type
Block Identification No.
Blocking
Test
code R1 Lot No.
R1 Bottle
No.
R2 Lot No.
R2 Bottle
No.
Cuvette side
ANL unit No.
Blocking
Test result
Flags
5) 6)
- 16 -
Original
Sample no.
(6) Repeat run result text -2 Stat fast sample (AU2700 Only) .
1) d H 3)
Rack no.
_ _ _ _
Cup
Position
1-22
P n n n
Sample no.
Sample ID
Sample type
Block Identification No.
Blocking
Test
code R1 Lot No.
R1 Bottle
No.
R2 Lot No.
R2 Bottle
No.
Cuvette side
ANL unit No.
Blocking
Test result
Flags
5) 6)
- 17 -
Original
Sample No.
(7) Reagent blank result text.
1) D R 3) _
_
_
_
_ _
Sample no.
Sample type
This dummy is same ID digits
and assigned area is decided associated
with the rack No.
_
_
_
_
_
_
Dummy
_ _ _
Block Identification No.
ANL unit No.
Cuvette side
Test
code
R1 Lot No.
R1 Bottle No.
R2 Lot No.
1:First data
2:Second data
Test Result
Flags
5) 6)
- 18 -
R2 Bottle No.
(8) Acal (Calibration) result text.
1) D A 3) _
_
_
_
_ _
Sample no.
This dummy spaces is assigned in case rack No. exists
and assigned area is decided associated with the rack No.
Calibrator ID
Calibrator No. (1-80)
Block Identification No.
ANL unit No.
Cuvette side
Blocking
Test
Code R1 Lot No.
R1 Bottle
No.
R2 Lot No.
R2 Bottle
No.
Blocking
Test result
Flags
5) 6)
- 19 -
Dum
my
_ _
(9) QC (Quality Control) result text.
1) D Q 3) _
_
_
_
_
_
Sample no.
Control ID
This dummy No. is assigned in case rack No. exists
and assigned area is decided associated with the rack No.
Control No.
Block Identification No.
ANL unit No.
Cuvette side
Blocking
Test
code R1 Lot No.
R1 Bottle
No.
R2 Lot No.
R2 Bottle
No.
Blocking
Test result
Flags
5) 6)
(10) End of test result transfer text.
1) D E
3) 5) 6)
- 20 -
Dum
my
_ _
(3.5)
Relation between real-time/batch and Transmission text
•
•
T.R.I. inquiry of Routine, Emergency, Stat and Repeat run can be selected as real-time or batch.
Test results of all samples can be selected as real-time or batch.
- 21 -
(3.6) Others
(1) Contents and formats of text.
Item
1. Rack No.
Digit
4 or 5
(Optional)
Contents
'0001'-'9999' or
'00001'-'99999'
STAT sample is space
When Rack no. is no setting,
Rack No. is '00000'.
2. Cup position
(Optional)
2
rack : '01'-'10'
STAT : '01'-'22'
3. Sample type
1
4. Sample No.
4
5. Sample ID
4-26
space : serum
U : urine
X : other
'0001'-'9999' : Routine sample
'E001'-'E999' : Emergency sample
'P001'-'P999' : Stat sample
'R001'-'R999' : Reagent blank
'A001'-'A999' : Calibration sample
'Q001'-'Q999' : QC sample
Number or character
6. Original
Sample No.
4
7. Reserved
8. Block
Identification
No.
4
1
'0001'-'9999' : normal sample
'E001'-'E999' : emergency sample
'P001'-'P999' : stat sample
Space
'0'-'9' Last text is 'E'
- 22 -
Remarks
•
The digit of rack no.
and cup pos. and
these using is
changeable in
[PARAMETER]
[ONLINE]
[PROTOCOL]
menu.
•
In case ,receive
T.R.I.
in batch.
•
This is automatically
assigned when rack
No. is in use.
•
Number of digits can
be changed in the
[PARAMETER]
[FORMAT]
[FORMAT
REQUISITION]
menu.
For Repeat Run Results.
9.ANL unit No.
1
(Optional)
‘1’: AU5400 ISE
‘1’: AU5400 unit 1
‘2’: AU5400 unit 2
‘3’: AU5400 unit 3
‘1’: AU2700
10.Cuvette side
1
(Optional)
11. Sex
AU5400
‘0’ : inner cuvette (ISE Cell 1)
‘1’ : outer cuvette (ISE Cell 2)
AU2700
‘0’ : inner cuvette(ISE)
‘1’ : outer cuvette
1
M : male
F : female
SP : none sex
0 : no-set
12. Age
(Optional)
13. Month
(Optional)
14. Patient
Information
(Optional)
15. Online
Test No.
3
20
'000'-'150'
space : no-set
*1
'00'-'11'
space : no-set
*1
number or character
2
'01'-'99'
16. Method
1
'0':normal
'1':dilution
‘2’:condense
- 23 -
(Optional)
2
ANL unit No. is added to the
header portion of RB, ACAL,
and QC result data. Normal
sample and rerun sample, it is
added to each item. However,
in the case of an calculate
item, a space is added. In a
normal sample and repeat run,
it can be prevented from
adding a unit number by the
setup of an on-line condition
menu. This option can be
selected in the
[PARAMETER][ONLINE]
[PROTOCOL][SPECIAL]
menu.
Cuvette side is added to the
header portion of RB, ACAL,
and QC result data. Normal
sample and rerun sample, it is
added to each item. However,
in the case of an calculate
item, a space is added. In a
normal sample and rerun, it
can be prevented from adding
a unit number by the setup of
an on-line condition menu.
This option can be selected in
the
[PARAMETER][ONLINE]
[PROTOCOL][SPECIAL]
menu.
•
These items can be
selected/canceled in
the [PARAMETER]
[FORMAT]
[FORMAT
REQUISITION]
menu.
•
This number can be
changed in the
[PARAMETER]
[ONLINE] [TEST
NO.]
For Repeat Run Results.
17. Test result
8 or 11
Test Result digits can be 6 or 9.
Flags digits is 2.
•
Refer to Appendix 1 (Flags List)
•
18. Lot No. and
Bottle No.
(Optional)
4*4
Number or character
•
0 suppress can be
selected/canceled in
online parameter
menu
Number of digits can
be changed to
6 or 9 in
online parameter
menu.
This option can be
selected in the
[PARAMETER]
[ONLINE]
[PROTOCOL]
[SPECIAL] menu.
Remark *1: If only age is the space in the text from a host, AU2700/AU5400 will output an error. The combination of Age
and Month is as follows.
Host -> AU2700/5400
Pattern
Age
1
Spaces
2
XXX
3
Spaces
4
XXX
Month
Spaces
Spaces
XX
XX
- 24 -
Result
OK
OK
Error
OK
(2) Test result format.
A. Test result
•
0
Data digit is 6 and 0 suppress is not used.
1 2
•
-
•
4
1
2
3
.
4 5
6
Data digit is 6 and 0 suppress is used.
_
•
-
.
Data digit is 9 and 0 suppress is not used.
0
-
3
1
2 3
4
Data digit is 9 and 0 suppress is used.
_
1
2 3
.
4
5
6
- 25 -
B.
LIH result
•
Data digit is 6 and 0 suppress is not used.
LIP
ICT
HEM
0
0
0
0 NORMAL
1+
2 ++
3 +++
4 ++++
5 +++++
6 ABN
9 Test not performed.
•
FLAG
Data digit is 9 and 0 suppress is not used.
LIP
0 0
ICT
0 0
HEM
0 0
0 NORMAL
1+
2 ++
3 +++
4 ++++
5 +++++
6 ABN
9 Test not performed.
FLAG
- 26 -
•
Data digit is 6 and 0 suppress is used.
LIP
ICT
_
_
HEM
_
0 NORMAL
FLAG
1+
2 ++
3 +++
4 ++++
5 +++++
6 ABN
9 Test not performed.
•
LIP
_ _
Data digit is 6 and 0 suppress is used.
ICT
_ _
HEM
_ _
0 NORMAL
1+
2 ++
3 +++
4 ++++
5 +++++
6 ABN
9 Test not performed.
FLAG
- 27 -
(3) T.R.I. of calculated tests.
Note: Calculated Test No. in T.R.I. from Host is ignored. The tests that create the calculated tests
can only be ordered from the Host.
(4) Data format that Test result data is digit over.
a.
Data digit is 6.
9
9
9
9
9 9
• Data digit is 9.
9
9
9
9
9
9
9
9
9
(5) Data format that Test result data is OD-value.
• Data digit is 6.
0
.
1 2
3
4
When the data is negative OD-value, it is same as digit over.
• Data digit is 9.
-
0
.
1
2
3
4
- 28 -
(6) T.R.I of LIH.
In any case, LIH test no. in T.R.I from Host is necessary for LIH analysis.
LIH Reagent Test Name
LIH
LIH Measure
All
Even if AU2700/AU5400 does not have the request from
a host, it performs LIH analysis.
Select
AU2700/AU5400 performs LIH analysis according to the
request from a host.
Other
All
Even if AU2700/AU5400 does not have the request from
a host, it performs LIH analysis.
No
LIH analysis is not performed even if AU2700/AU5400
has the request from a host.
Note 1) These can be selected by the following menus.
LIH Reagent Test Name : [PARAMETER] – [COMMON TEST PARAMETERS] – [TEST NAME]
LIH Measure
: [PARAMETER] – [COMMON TEST PARAMETERS] – [ROUND]
- 29 -
4. Transmission Protocols
(4.1)
Protocols at AU2700/5400
(1) Class A: without ACK/NAK exchange.
A. Sending
Text to be sent:
T.R.I. Inquiry text
Repeat Run T.R.I. Inquiry text
Start of Test Result Transmission text
Test Result text
Repeat Run Result text
End of Test Result Transmission text
Initial
Condition
Start
of
Text
Block end (BCC)
Transmission text
Text end (BCC)
B. Receiving
Text to be received:
T.R.I. text
Repeat Run T.R.I. text
End of T.R.I. Transmission text
Initial
Condition
Start
of
Text
Block end (BCC)
Transmission text
Text end (BCC)
- 30 -
(2) Class B: with ACK/NAK protocol.
A. Sending
Text to be sent:
T.R.I. Inquiry text
Repeat Run T.R.I. Inquiry text
Start of Test Result Transmission text
Test Result text
Repeat Run Result text
End of Test Result Transmission text
ACK
Received
ACK
Received
Block end (BCC)
Initial
Condition
Start
of
Text
Transmission text
Text end (BCC)
1st time: resending the same block
2nd time: sending the next block
1st time: resending the same text
2nd time: return to initial condition
- 31 -
NAK
Received
or
Time-out
NAK
Received
or
Time-out
B. Receiving
Test to be sent:
T.R.I. text
Repeat Run T.R.I. text
End of T.R.I. Transmission text
ACK
Send
ACK
Send
NAK
Send
NAK
Send
Block end (BCC)
Initial
Condition
Start
of
Text
Transmission text
Text end (BCC)
1st time: receiving the same block
2nd time: receiving the next block
1st time: receiving the same text
2nd time: return to initial condition
- 32 -
(4.2)
Timing/time-out
(1) Time-out/timing list .
Kind
Description
T1
Limit time from end of transfer/receive to start
of text receive.
T2
Limit time from start of text receive to end of
text receive.
T3
Limit time from start of text transfer to end of
text transfer.
T4
Limit time from end of text transfer to response of
receive.
T5
Interval time of transmission
T6
Min. time from receive
T7
Limit time from NAK response to start receive
of retry text.
t1
Min. time from end of transfer text to receivable
text.
t2
Min. time from end of transfer text to next receivable
text.
Min. time from end of transfer text to receivable
t3
Response.
Min. time from end of receiving text to transfer
t4
Response.
A
<T2
t1<<T1
B.
Case 2
A
0.5 s
0.5 s
0.5 s
<T3
T5<
B
C
AU2700/5400
Host
<T3
<T3
T5<
<T3
T5<
- 33 -
s
s
s
s
0.5 s
B
<T3
0.1 x n sec
(Note 2)
2
2
1
2
C
AU2700/5400
Host
2 s
n=1-99
(2) Rule of class A
Case 1
Remarks
(Note 1)
note 1) ((Max text length x Character length)/Bit/sec)+ 0.5 s
note 2) These time-outs can be changed in the online parameters menu.
A.
Default
Not Changeable
C.
AU2700/5400
Host
Case 3
A
B
<T2
C
<T2
t2<<T1
<T2
t2<<T1
- 34 -
(4.3)
Rule of class B
(1) Case 1
A
A
C
K
AU2700/5400
Host
A
C
K
C
B
<T3
<T2
t3<<T4
t1<<T1
<T3
t4<
T5<
(2) Case 2
A
B
AU2700/5400
Host
A
C
K
<T3
<T3
t3<<T4
T5<
(3) Case 3
AU2700/5400
Host
A
C
K
A
C
<T2
<T2
t2<<T1
t4<
(4) Case 4 (Abnormal Case 1)
A
AU2700/5400
Host
A
B
N
A
K
N
A
K
<T3
<T3
t3<<T4
T6<
<T3
t3<<T4
- 35 -
T5<
(5) Case 5 (Abnormal Case 2)
A
A
AU2700/5400
Host
N
A
K
N
A
K
<T3
B
<T3
t3<<T4
T6<
<T2
t3<<T4
t1<
(6) Case 6 (Abnormal Case 3)
AU2700/5400
Host
N
A
K
N
A
K
A
A
<T2
B
<T2
t4<
t2<<T7
<T2
t4<
t1<<T1
(7) Case 7 (Abnormal Case 4)
AU2700/5400
Host
N
A
K
N
A
K
A
B
A
<T2
<T2
t4<
t2<<T7
<T3
t4<
- 36 -
T5<
5. Application Protocol
(5.1)
Receiving T.R.I.
(1) Trans./receive sequence in one session.
General sequence :
A. Example 1
Shift next Rx-transfer when Online Error occurred.
RB
Rx
Rx
Rx
AU2700/5400
・・・
0
E
0
E
Sx
Sx
Sx
Sx
Host
SE
In case 2 blocks
B. Example 2
Stop the session when Online Error occurred.
RB
Rx
Rx
RE
AU2700/5400
・・・
0
E
0
E
Sx
Sx
Sx
Sx
Host
(2) Detail
T.R.I.
Receive Kind of text
Real-time RB(request
Start)
Timing/condition
This text is transferred when it is shifted from stand-by
mode to start measure and then the first Rx is transmitted.
R_ * (request
normal)
(Note 2)
Request of
When detecting cup, this Sample No. is transferred if this
sample no.
sample has not T.R.I..
Request of
When reading ID is normally, this Sample ID is transferred
sample id
if this sample has not T.R.I..
RH (request
rerun)
(Note 2)
Request of
When detecting cup, this Sample No. is always transmitted
sample no.
Request of
When reading ID is normally, this Sample ID is always
sample ID
transmitted.
remarks * _ is space.
Note 1) The number of times a T.R.I. inquiry can be sent when an online error is generated can be selected in
[PARAMETER] [ONLINE] [PROTOCOL].
Note 2) It is possible that the R_-text and RH-text are mixed in one session.
- 37 -
Receive
Kind of text
Real-time
Sx
SE
RE (request
end)
Batch
RB (request
start)
R_ * (request
Normal)
Request of
sample no.
RH (request rerun)
Request of
sample no.
Sx
Timing/condition
This text can be received after end of Rx-transfer within
the designated time.
This text is transferred when shifting to the modes below.
1) measure mode to standby mode
2) measure mode to stop mode
This text is transmitted when the communication is
canceled by the online alarm.
This text is transmitted when receiving T.R.I. is sent in the test
requisition.
(Note 3)
This text is transmitted at the designated time intervals.
The texts are the samples that are selected in the test
requisition menu.
(Note 3)
This text is transmitted at the designated time intervals.
The texts are the samples that are selected in the test
requisition menu.
This text can be received after end of Rx-transfer within
the designated time.
SE
RE (request end)
This text is transmitted when it was receiving the last sample No.
in test requisition menu and SE text isn't received.
This text is transmitted when the communication is
canceled in the test requisition menu.
This text is transmitted when the communication is
canceled by the online alarm.
remarks * _ is space.
Note 3) R_-text and RH-text is transferred in separate sessions.
- 38 -
(3) Kind of T.R.I. transfer/receive.
A. T.R.I. of normal sample
Setting of parameters
Receive T.R.I.. inquiry
Real-time
Method of T.R.I. inquiry & T.R.I.
Method of
T.R.I. inquiry
Sequential
Rack no.
Kind of T.R.I.
Request
of sample no
Sample ID
Batch
Request
of sample ID
Request
of sample no
Sequential
Rack no.
T.R.I. inquiry
Sample no
T.R.I.
Sample no *1
Sample no
(Calculated rack
No. and cup pos.
No.)
Sample ID
Sample no *1
Sample no.
Sample ID *1
Sample no *1
Sample no *1
Sample ID
Sample ID *1
Sample no *1
• Selectable setting of receiving T.R.I. in online parameter menu and requisition format menu.
• Selectable method of T.R.I. in system menu.
Remark *1: Sample no. and Sample ID of T.R.I. must be same to the Sample no. and Sample ID of T.R.I inquiry.
(4) T.R.I. of Repeat sample
Setting of parameters
Repeat sample
Receive of T.R.I. Repeat rack
Real-time
Using
Batch
-
Method of T.R.I. inquiry & T.R.I.
Method of
T.R.I. inquiry
Sequential
rack no.
Kind of T.R.I.
Sample ID
Request
of sample ID
Sequential
rack no.
Request
of sample no.
T.R.I. inquiry
Request
of Sample no.
Sample ID
Repeat sample no.
Sample ID
Repeat sample no.
*1
Repeat sample no.
T.R.I.
Original
sample no. *1
Repeat sample no.*1
Sample ID *1
Repeat sample no.*1
Original
sample no. *1
Sample ID *1
Remark *1: Repeat sample no. and sample ID of T.R.I. must be same as the Repeat sample no. and sample ID of T.R.I
inquiry.
- 39 -
(5.2)
Sending test result protocol
(1) Transfer sequence for one session.
General sequence :
A. Example 1
Shift next Dx-transfer when Online Error occurred.
DB
Dx
Dx
Dx
Dx
Dx
0
E
0
E
E
DE
AU2700/5400
2 blocks
Host
B. Example 2
Stop session when Online Error occurred.
DB
Dx
Dx
Dx
Dx
Dx
0
E
0
E
E
DE
AU2700/5400
Host
(2) Detail
Data
Trans. Kind of text
Real
DB (START)
-time
Timing/condition
This text is transmitted when
it is shifted from stand-by
mode to measure mode and just
behind the first Dx is transmitted.
Normal end
It is shifting the
transfer of the
test results.
Dx (result data)
It is transmitted one by one
the samples that are finished
measuring.
It is shifting next
The transfer of
Dx/DE.
DE (end)
This text is transmitted after
the last transfer of Dx text
and the below shifting mode.
It is ended the
session of transfer of
The text of test
results.
1) measure mode to standby
2) measure mode to stop
This text is transmitted when
the communication is canceled
by the online alarm.
- 40 -
Online error
It is output the
alarm and it is
executed the below
• Error protocol is
stop.
It is canceled the
transfer of Dx/DE
• Error protocol is
continue
It is shifting next
the transfer of
Dx/DE.
It is output the
alarm and ended
the session of the
transfer of the
text of test results.
Data
Trans.
Batch
Kind of text
DB (start)
Dx
(result data)
DE (end)
Timing/condition
This text is transmitted when it
selected the start of transmission
in the online menu.
Normal end
It is shifting the
transfer of the test
Results.
This text is transmitted at
the designate time intervals.
The text are the samples that
is selected in the online menu
It is shifting next
The transfer of
Dx/DE.
This text is transmitted when
it was transmitting the
sample No. that is selected in
online menu and it was after
the designated time.
It is ended the
session of transfer
of the text of test
results.
Online error
It is output the
alarm and it is
executed the below
• Error protocol is
stop.
It is canceled the
transfer of Dx/DE
• Error protocol is
continue.
It is shifting next
the transfer of
Dx/DE.
It is output the
alarm and ended
The session of the
transfer of the
text of test results.
This text is transmitted when
the communication is canceled
in the online menu.
This text is transmitted when
the communication is canceled
by the online alarm.
Note 1) The number of times a TRI Inquiry can be sent when an online error is generated can be selected in the
[PARAMETER] [ONLINE] [PROTOCOL] menu.
- 41 -
(5.3) Others
(1) Mixing the session of the TRT inquiry and the session of the test results.
A. General sequence
Rx
Dx
Dx
Rx
AU2700/5400
・・・
Host
Sx
Sx
Sx
(a)
Sx
(b)
(2) Detail
Section
(a)
Definition of section
The start of the transmission of the text
of T.R.I. inquiry
-- The end of the receiving of all T.R.I.
for one samples
Limitation
Don't transmit the Test result text.
(b)
The start of the transmission of the text
of the test results
-- The end of the receiving of all result
for one samples
Don't transmit the T.R.I. text.
- 42 -
6. Specification of Connection
(6.1)
In/Output signals and Terminals
PC Terminal
at AU2700/5400
Signal Name
Abbrv.
Terminal
at host
Direction
computer
(25 Pin Configuration)
------------------------------------------------------------------------------------------------------------------Ground
FG
1
Data sent
TxDATA
3
3 (Rx DATA)
Data receive
RxDATA
2
2 (Tx DATA)
Signal Ground
SG
5
7 (SG)
Request to send RTS
Clear to send
CTS
7
8
Caution: RTS and CTS must be connected directly.
(6.2)
Signal Level
Signal/Signal Format
Signal Level
-----------------------------------------------------------------------------------SPACE (ON)
+3V and higher ("H")
MARK (OFF)
-3V and lower ("L")
Note: "H" stands for "HIGH LEVEL" and "L" for "LOW LEVEL".
(6.3)
Applicable Connector
Style of connector : Confirm the standard of IBM PC (RS232 DB9 Male)
Provide a RS232 DB9 Female connector.
Style of connector Cover : ditto
(6.4)
Others
A. When powering ON or OFF the host computer system, ensure that the AU2700/5400 is in
Standy mode. Powering ON or OFF the host computer system while the AU2700/5400 is being operated may
result in abnormality function of the AU2700/5400.
B. The cable for host communication is not included in the AU2700/5400 standard accessories.
A shielded cable must be used for host connection.
C. Do not use the terminals on the AU2700/5400 other than No. 2,3,5,7, or 8 for any purpose.
- 43 -
A.
Flag
(
%
?
#
R
!
U
u
Y
y
@
$
D
B
*
&
Z
F
G
x
1
2
3
4
5
6
7
p
T
P
N
H
L
J
K
S
Appendix
(1) Flags list
Contents
Failed to evade the contamination since the detergent for evading the contamination is not enough.
The sample probe is clogged with sample.
Calculation unable due to abnormal photometric data
Sample level detection error
Reagent level detection error
Calculation unable due to abnormal data
Reagent absorbance value at P-START of Reagent Blank run, is smaller than the
Lower limit of the Parameter.
Reagent absorbance value at P-START is lower than the lower limit specified
In the Parameters in routine run.
Reagent absorbance value at P-END of Reagent Blank run, is greater than the
Upper limit of the Parameter.
Reagent absorbance value at P-END is higher than the upper limit specified
In the Parameters in routine run.
Abnormally high result; absorbance of every wavelength is more than 2.5.
No linearity validation conducted because less than 3 data obtained in the
Kinetics.
Too quick reaction slope in increasing kinetics, absorbance at P-START is
Higher than MAX. OD in increasing FIXED assay, or too slow reaction slope
In decreasing kinetics (= no reaction observed)
Too quick reaction slope in increasing kinetics, or absorbance at P-END is
Lower than MIN. OD in increasing FIXED assay.
Linearity error in kinetics.
Linearity error in kinetics.
Prozone data error (prozone check point data error)
Prozone error
Result higher than the dynamic range specified in the Parameters
Result lower than the dynamic range specified in the Parameters
Other QC data error
QC result beyond the QC value range specified in the Parameters
Multi-rule QC data error
Multi-rule QC data error
Multi-rule QC data error
Multi-rule QC data error
Multi-rule QC data error
Multi-rule QC data error
Result beyond the panic value specified in the Parameters
Abnormality found in the Inter-Item Check
Result higher than DECIDE RANGE designated in parameters.
Result lower than DECIDE RANGE designated in parameters.
Higher than the result value range specified in the Parameters
Lower than the result value range specified in the Parameters
Result higher than the repeat run range specified in the Parameters
Result lower than the repeat run range specified in the Parameters
Result extracted for repeat run
- 44 -
/
r
e
c
a
b
)
Test not performed: test has been requisitioned but not performed due
To any reason.
transferred data to host
edited data
correct data by manual correction
On-board stability over
Calibration stability over or Calibration does not exist.
Current reagent lot number was different from reagent lot No. when ACAL analysis
- 45 -
(2) Online parameters list
Transmission information
T.R.I. receive
Normal sample
Emergency sample
Stat sample
Normal Repeat sample
Emergency Repeat sample
Stat Repeat sample
Test result transfer
Normal sample
Emergency sample
Stat sample
Stat Fast sample
Normal Repeat sample
Emergency Repeat sample
Stat Repeat sample
QC sample
Calibration sample
Reagent blank sample
Protocol 2
Error control
Receive
Transfer
Protocol –1
Data format
character length
parity bit
stop bit
7/8
ODD/EVEN/none
1/2
[PARAMETER] [ONLINE]
[PROTOCOL] menu.
Basic text format
start code 1
start code 2
end code 1
end code 2
Max text length
unit no.
use ETB
00H-FFH
00H-FFH
00H-FFH
00H-FFH
256/512/1024
00-99 space
use/none
[PARAMETER] [ONLINE]
[PROTOCOL] menu.
Sequence control
bit/sec
protocol
BCC check
retry times
time out T1
T2
T3
T4
T5
T6
T7
Text Format
Contents
menu
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
[PARAMETER] [ONLINE] [SETUP]
menu.
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
Real-time/none
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
Real-time/batch/none
Contents
Continue/stop
Continue/stop
Contents
menu
[PARAMETER] [ONLINE]
[PROTOCOL] menu.
menu
4800/9600
class A/class B
use/none
(0-3)
nn
nn
nn
nn
nn
nn
nn
- 46 -
Text information
rack no. /cup position
rack no. digit
Contents
use/none
4/5
menu
[PARAMETER] [ONLINE]
[PROTOCOL] menu.
Sex
age/month
use/none
use/none
patient information 1
patient information 2
patient information 3
patient information 4
patient information 5
patient information 6
sample ID digits
use/none digits
use/none digits
use/none digits
use/none digits
use/none digits
use/none digits
4-26 digits
[PARAMETER] [FORMAT]
[REQUISITION FORMAT]
menu.
[PARAMETER] [FORMAT]
[REQUISITION FORMAT]
menu.
[PARAMETER] [FORMAT]
[REQUISITION FORMAT]
menu.
data format
6 /9 digits
[PARAMETER] [ONLINE]
[PROTOCOL] menu.
data zero suppress
used/none
[PARAMETER] [ONLINE]
[PROTOCOL] menu.
Sample Type
used/none
[PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Dummy
used/none
[PARAMETER] [ONLINE]
(Test Result Transmission Text)
[PROTOCOL] [SPECIAL] menu.
Block Identification No.
used/none
[PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
ANL Unit No.
used/none Note 3
[PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Cuvette Side
used/none Note 3
[PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Sequence of S.No. and S.ID in
S.No. / S.ID
[PARAMETER] [ONLINE]
T.R.I text
[PROTOCOL] [SPECIAL] menu.
Sequence of S.No. and S.ID in
S.No. / S.ID
[PARAMETER] [ONLINE]
Test result text
[PROTOCOL] [SPECIAL] menu.
Lot No. and Bottle No.
used/none
[PARAMETER] [ONLINE]
[PROTOCOL] [SPECIAL] menu.
Note 1)When you send the “Block Identification No.” field as none, the program will change the parameters automatically as
following.
End Code = ETX
ETB Control = used
Note 3) Only a Normal sample and repeat sample can be changed.
- 47 -
Each of the following parameters are influenced as shown below.
Sample Type
Dummy
(Test Result
Transmission Text)
Block Identification
No.
Sequence of S.No.
and S.ID in
T.R.I text
Sequence of S.No.
and S.ID in
Test result text
ANL Unit No.
Cuvette Side
Lot No. and Bottle
No.
○
×
-
RB
-
R_
○
-
RH
×
×
RE
-
S_
○
○
SH
×
×
SE
-
DB
-
D_
○
○
d_
○
○
DH
×
×
dH
×
×
DR
×
×
DA
×
×
DQ
×
×
DE
-
-
○
×
-
×
×
-
-
○
○
×
×
×
×
×
-
-
-
×
-
-
×
-
-
-
-
×
×
×
×
×
-
-
-
-
-
-
-
-
-
○
○
×
×
×
×
×
-
-
-
-
-
-
-
-
-
○
○
○
○
○
○
○
○
○
○
○
○
×
×
○
×
×
○
×
×
○
-
: influenced
: not influenced
: not apply
- 48 -
(3) Character Table
HIGH
LOW
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
SH
SX
EX
ET
EQ
AK
BL
BS
HT
LF
H
M
CL
CR
SO
SI
1
DE
D1
D2
D3
D4
NK
SN
EB
CN
EM
SB
EC
2
3
SP 0
!
1
"
2
#
3
$
4
% 5
& 6
'
7
(
8
)
9
*
:
+ ;
4
5
6
@ P
A Q a
B R b
C S
c
D T d
E U e
F
V f
G W g
H X h
I
Y i
J
Z j
K [
k
7
p
q
r
s
t
u
v
w
x
y
z
{
FS
GS
RS
US
,
.
/
L
M
N
O
|
}
~
DL
<
=
>
?
\
]
^
_
l
m
n
o
8
9
A
B
C
From 20H to 7EH: These characters can be used for the Sample ID code.
From 30H to 39H: These characters can be used for Test numbers.
A1 - DC is Japanese character set.
- 49 -
D
E
F
(4) AU2700/5400 Online Parameter Sheet
Set up
T.R.I. Receive
Routine Normal
Routine Emergency
Routine Repeat
Emergency Repeat
Stat Normal
Stat Repeat
Results Transfer
Routine Normal
Routine Emergency
Routine Repeat
Emergency Repeat
Stat Normal
Stat Repeat
Stat Fast
QC
Calibration
Reagent blank
Upper protocol
Error control
T.R.I. Receive
Results Transfer
Lower protocol
Character format
Character length.
Parity bit
Stop bit
Data format
Start code 1
Start code 2
End code 1
End code 2
Text length
Unit No.
ETB control
SEQ. Control
Bit/sec
Class
BCC check
Retry
Time out T1
T2
T3
T4
T5
T6
T7
Text format
Setting
real time
real time
real time
real time
real time
real time
batch
batch
batch
batch
batch
batch
none
none
none
none
none
none
real time
real time
real time
real time
real time
real time
real time
real time
real time
real time
Setting
batch
batch
batch
batch
batch
batch
none
batch
batch
batch
none
none
none
none
none
none
continue
continue
Setting
7
odd
1
[
[
[
[
stop
stop
8
even
2
(01-1F)
(00-1F)
(01-1F)
(00-1F)
256
512
[ ] (00-99 space)
yes
no
[
[
[
[
[
[
[
[
none
none
none
none
]
]
]
]
4800
9600
Class A
Class B
yes
no
] (0-3)
] (0-99)
] (0-99)
] (0-99)
] (0-99)
] (0-99)
] (0-99)
] (0-99)
Setting
- 50 -
1024
Rack No.
Sex
AGE/MONTH
patient inf. 1
patient inf. 2
patient inf. 3
patient inf. 4
patient inf. 5
patient inf. 6
ID digits
Data format
ZERO Suppress
Sample Type
Dummy
Block Identification
ANL unit No.
Cuvette side
Sequence of S.No. and S.ID in
T.R.I text
Sequence of S.No. and S.ID in
Test result text
Lot No. and Bottle No.
none
4
yes
no
yes
no
yes[ ]digits
yes[ ]digits
yes[ ]digits
yes[ ]digits
yes[ ]digits
yes[ ]digits
[ ]digits (4-26)
6
9
yes
no
yes
no
yes
no
yes
no
yes
no
yes
no
No.
S.ID
yes
no
yes
no
5
no
no
no
no
no
no
- 51 -
(5) ONLINE ALARM LIST
1)ONLINE ERROR [ aa ] [ bbbbbbbbb ]
<Operation>
(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive has been designated
as "STOP", then the following will occur:
1) Text following the alarm will not be received.
2) In a case when the text requisition is received real-time,the "STOP" status is ignored at the start of
the next analysis and the text requisition will be received real-time again.
(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive has been designated to "CONTINUE",
the test requisition for the next sample will be received real-time.
<Description>
(1).Communication error occurs when transmittng the text for test requisition or when receiving the test requisition format.
(2).The display in the [ ] and its meaning are as follows.
aa : type of the errors
---------------------------------------------------------------01 : Device name error
02 : Framing error
03 : Over run error
04 : Parity error
05 : Time out error
06 : Receive NAK when transmitting a text
07 : BCC error when receiving a text
08 : Other communication errors
09 : Function error (Full Duplex instead of Half Duplex)
10 : Unit name error
11 : Parameter error
12 : Request cancel
---------------------------------------------------------------bbbbbbbbb
: Text having error
---------------------------------------------------------------RB
: Start text for receiving the test
requisition information.
RE
: End text for receiving the test
requisition information.
R_ __ nnnn
: normal run, normal sample, sample No.
R_ _E nnnn
: normal run, emergency sample, sample No.
R_ _P nnnn
: normal run, STAT sample, sample No.
R_ U_ nnnn
: normal run, urine sample, sample No.
R_ UE nnnn
: normal run, urine emergency sample, sample No.
R_ UP nnnn
: normal run, urine STAT sample, sample No.
R_ X_ nnnn
: normal run, urine sample, sample No.
R_ XE nnnn
: normal run, urine emergency sample, sample No.
R_ XP nnnn
: normal run, urine STAT sample, sample No.
RH __ nnnn
: repeat run, normal sample, sample No.
RH _E nnnn
: repeat run, emergency sample, sample No.
RH _P nnnn
: repeat run, STAT sample, sample No.
RH U_ nnnn
: repeat run, urine sample, sample No.
RH UE nnnn
: repeat run, urine emergency sample, sample No.
RH UP nnnn
: repeat run, urine STAT sample, sample No.
R_ __ xxxxxxxxxxx: normal run, normal sample, sample ID
R_ _E xxxxxxxxxxx: normal run, emergency sample, sample ID
R_ _P xxxxxxxxxxx: normal run, STAT sample, sample ID
R_ U_ xxxxxxxxxxx: normal run, urine sample, sample ID
R_ UE xxxxxxxxxxx: normal run, urine emergency sample,sample ID
R_ UP xxxxxxxxxxx: normal run, urine STAT sample, sample ID
R_ X_ xxxxxxxxxxx: normal run, urine sample, sample ID
R_ XE xxxxxxxxxxx: normal run, urine emergency sample,sample ID
R_ XP xxxxxxxxxxx: normal run, urine STAT sample, sample ID
RH __ xxxxxxxxxxx: repeat run, emergency sample, sample ID
RH _E xxxxxxxxxxx: repeat run, emergency sample, sample ID
RH _P xxxxxxxxxxx: repeat run, STAT sample, sample ID
- 52 -
RH U_ xxxxxxxxxxx: repeat run, urine sample, sample ID
RH UE xxxxxxxxxxx: repeat run, urine emergency sample, sample ID
RH UP xxxxxxxxxxx: repeat run, urine STAT sample, sample ID
RH X_ xxxxxxxxxxx: repeat run, emergency sample, sample ID
RH XE xxxxxxxxxxx: repeat run, emergency sample, sample ID
RH XP xxxxxxxxxxx: repeat run, STAT sample, sample ID
----------------------------------------------------------------
- 53 -
2)ONLINE ERROR [ aa ] [ bbbbbbbbb ]
<Operation>
(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "STOP",
the following events can occur:
1). The text following the alarm will not be received.
2). In a case when the text requisition is received real-time,the "STOP" designation is ignored and the text requisition
will be received in real-time at the start of the next analysis.
(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "Continue",
the test requisition for the next sample will be received.
<Description>
(1). Communication error occurs when transmitting the text for test requisition or receiving the test requisition format.
(2). The display in the [ ] and its meaning are as follows.
aa : type of the errors
---------------------------------------------------------------01 : Device name error
02 : Framing error
03 : Over run error
04 : Parity error
05 : Time out error
06 : Receive NAK when transmitting a text
07 : BCC error when receiving a text
08 : Other communication errors
09 : Function error (Full Duplex instead of Half Duplex)
10 : Unit name error
11 : Parameter error
12 : Request cancel
---------------------------------------------------------------bbbbbbbbb
: Text having error
---------------------------------------------------------------RB
: Start text for receiving the test
requisition information.
RE
: End text for receiving the test
requisition information.
R_ __ nnnn
: normal run, normal sample, sample No.
R_ _E nnnn
: normal run, emergency sample, sample No.
R_ _P nnnn
: normal run, STAT sample, sample No.
R_ U_ nnnn
: normal run, urine sample, sample No.
R_ UE nnnn
: normal run, urine emergency sample, sample No.
R_ UP nnnn
: normal run, urine STAT sample, sample No.
R_ X_ nnnn
: normal run, Other normal sample, sample No.
R_ XE nnnn
: normal run, Other emergency sample, sample No.
R_ XP nnnn
: normal run, Other STAT sample, sample No.
RH __ nnnn
: repeat run, normal sample, sample No.
RH _E nnnn
: repeat run, emergency sample, sample No.
RH _P nnnn
: repeat run, STAT sample, sample No.
RH U_ nnnn
: repeat run, urine sample, sample No.
RH UE nnnn
: repeat run, urine emergency sample, sample No.
RH UP nnnn
: repeat run, urine STAT sample, sample No.
RH X_ nnnn
: repeat run, Other normal sample, sample No.
RH XE nnnn
: repeat run, Other emergency sample, sample No.
RH XP nnnn
: repeat run, Other STAT sample, sample No.
R_ __ xxxxxxxxxxx: normal run, normal sample, sample ID
R_ _E xxxxxxxxxxx: normal run, emergency sample, sample ID
R_ _P xxxxxxxxxxx: normal run, STAT sample, sample ID
R_ U_ xxxxxxxxxxx: normal run, urine sample, sample ID
R_ UE xxxxxxxxxxx: normal run, urine emergency sample, sample ID
R_ UP xxxxxxxxxxx: normal run, urine STAT sample, sample ID
R_ X_ xxxxxxxxxxx: normal run, Other normal sample, sample ID
R_ XE xxxxxxxxxxx: normal run, Other emergency sample, sample ID
R_ XP xxxxxxxxxxx: normal run, Other STAT sample, sample ID
RH __ xxxxxxxxxxx: repeat run, normal sample, sample ID
RH _E xxxxxxxxxxx: repeat run, emergency sample, sample ID
- 54 -
RH _P xxxxxxxxxxx: repeat run, STAT sample, sample ID
RH U_ xxxxxxxxxxx: repeat run, urine sample, sample ID
RH UE xxxxxxxxxxx: repeat run, urine emergency sample, sample ID
RH UP xxxxxxxxxxx: repeat run, urine STAT sample, sample ID
RH X_ xxxxxxxxxxx: repeat run, Other normal sample, sample ID
RH XE xxxxxxxxxxx: repeat run, Other emergency sample, sample ID
RH XP xxxxxxxxxxx: repeat run, Other STAT sample, sample ID
----------------------------------------------------------------
- 55 -
3)ONLINE FORMAT ERROR
<<Operation>>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for samples following the alarm.
<<Description>>
(1).In the Online Parameter menu, submenu Set Up, the T.R.I. receive is not designated asn "YES" for the necessary parameter.
(2).The display in the [ ] and its meaning are as follows.
aaaa
: Type of error
---------------------------------------------------------------R_ __
: normal run, a normal sample
R_ _E
: normal run, an emergency sample
R_ _P
: normal run, a STAT sample
R_ U_
: normal run, a urine normal sample
R_ UE
: normal run, a urine emergency sample
R_ UP
: normal run, a urine STAT sample
R_ X_
: normal run, a Other normal sample
R_ XE
: normal run, an Other emergency sample
R_ XP
: normal run, a Other STAT sample
---------------------------------------------------------------RH __
: repeat run, a normal sample
RH _E
: repeat run, an emergency sample
RH _P
: repeat run, a STAT sample
RH U_
: repeat run, a urine normal sample
RH UE
: repeat run, a urine emergency sample
RH UP
: repeat run, a urine STAT sample
RH X_
: repeat run, a Other normal sample
RH XE
: repeat run, an Other emergency sample
RH XP
: repeat run, a Other STAT sample
---------------------------------------------------------------bbbbbbbbbb : Information type that is not designated
No sample No.
No ID No.
- 56 -
4)ONLINE ILLEGAL TEXT CODE [ aa ]
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for samples following the alarm.
<Description>
(1).When receiving the test requisition information text using online, the text classification code is out of specification.
(2).The display of [ ] and its meaning are as follows.
aa
:
---------------------------------------------------------------R_
: Normal sample
RH
: Repeat run sample
---------------------------------------------------------------5)ONLINE ILLEGAL TEXT BLOCK No. [ aa -> bb ]
<Operation>
(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "STOP",
the following events occur:
1).Disregard the test requisition information text for the sample generating the alarm.
2).System will not receive text for samples following the sample generating the alarm.
3).In a case when the text requisition is received in real-time, the "STOP" is ignored and the text requisition text
will be received with real-time again during the next analysis.
(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "Continue",
the following events occur:
1).Disregard the test requisition information text for the sample generating the alarm.
2).The test requisition information text for the next sample will be received.
<Description>
(1).When receiving the requisition information text using online, the block identification No. is out of specification.
(2).The display of [ ] and its meaning are as follows.
aa : Previously received block identification No.
bb : Last received block identification No.
- 57 -
6)ONLINE ILLEGAL SAMPLE No. [ aa: bbbbb ]
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for other samples within the run.
<Description>
(1).When receiving the test requisition information text using online, sample No. of the sample generating the alarm
does not meet the specification.
(2).The display of [ ] and its meaning are as follows.
aa
: Sample type
---------------------------------------------------------------__
: Normal sample
_E
: Emergency sample
_P
: Stat sample
U_
: Urine normal sample
UE
: Urine emergency sample
UP
: Urine stat sample
X_
: Other Normal sample
XE
: Other Emergency sample
XP
: Other Stat sample
---------------------------------------------------------------bbbb
: Sample No.
---------------------------------------------------------------0001-9999 : Normal sample
E001-E999 : Emergency
P001-P999 : Stat sample
----------------------------------------------------------------
- 58 -
7)ONLINE ILLEGAL RACK No. [ aaaaaaa: b: cccccccc ]
<Operation>
(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "STOP",
the following events occur:
1).Disregard the test requisition information text for the sample generating the alarm.
2).System will not receive text for samples following the sample generating the alarm.
3).In a case when the text requisition is received in real-time, the "STOP" is ignored and the text requisition text
will be received with real-time again during the next analysis.
(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "Continue",
the following events occur:
1).Disregard the test requisition information text for the sample generating the alarm.
2).The test requisition information text for the next sample will be received.
<Description>
(1).When receiving the requisition information text using online, the rack No. is out of specification.
(2).The display of [ ] and its meaning are as follows.
aaa
: Transferred sample type and sample No.
--------------------------------------------------------------__ nnnn
: Normal sample
_E nnnn
: Emergency sample
_P nnnn
: Stat sample
U_ nnnn
: Urine normal sample
UE nnnn
: Urine emergency sample
UP nnnn
: Urine stat sample
X_ nnnn
: Other normal sample
XE nnnn
: Other emergency sample
XP nnnn
: Other Stat sample
bbb
: Received sample type and sample No.
--------------------------------------------------------------__ nnnn
: Normal sample
_E nnnn
: Emergency sample
_P nnnn
: Stat sample
U_ nnnn
: Urine normal sample
UE nnnn
: Urine emergency sample
UP nnnn
: Urine stat sample
X_ nnnn
: Other normal sample
XE nnnn
: Other emergency sample
XP nnnn
: Other Stat sample
--------------------------------------------------------------b
: Received the kind of rack
---------------------------------------------------------------N
: Normal sample rack
E
: Emergency rack
R
: Repeat run rack
---------------------------------------------------------------ccccccc
: Received rack No. and position in rack
- 59 -
8)ONLINE ILLEGAL SAMPLE KIND No. [ aa ]
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for the other samples within the run.
<Operation>
(1).When receiving the test requisition information text using online, sample kind No. of the sample generating the alarm
does not meet the specification.
(2).The display of [ ] and its meaning are as follows.
aa
: Sample type
---------------------------------------------------------------__
: Normal sample
_E
: Emergency sample
_P
: Stat sample
U_
: Urine normal sample
UE
: Urine emergency sample
UP
: Urine stat sample
X_
: Other normal sample
XE
: Other emergency sample
XP
: Other stat sample
---------------------------------------------------------------9)ONLINE ILLEGAL GENDER TEXT [ a ]
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for other samples within the run.
<Description>
(1).When receiving the requisition information text using online, the sex of this text is not within the specification.
(2).The display of [ ] and its meaning are as follows.
a
: Received sex
10)ONLINE ILLEGAL AGE/MONTH [ aaa bb ]
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for other samples within the run.
<Description>
(1).When receiving the requisition information text using online, age or month age (age for baby before one year old) of this
text is out of the specification.
(2).The display of [ ] and its meaning are as follows.
aaa
: Received age
bb
: Received month age
- 60 -
11)ONLINE ANALYSIS METHOD MISMATCH [ aa <> bb ]
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for other samples within the run.
<Description>
(1).When receiving the test requisition information text using online, sample type of this text does not match
the required sample type.
(2).The display of [ ] and its meaning are as follows.
aa
: Sample type
---------------------------------------------------------------__
: Normal sample
_E
: Emergency sample
_P
: Stat sample
U_
: Urine normal sample
UE
: Urine emergency sample
UP
: Urine stat sample
X_
: Other normal sample
XE
: Other emergency sample
XP
: Other Stat sample
---------------------------------------------------------------bb
: Received sample type
---------------------------------------------------------------__
: Normal sample
_E
: Emergency sample
_P
: Stat sample
U_
: Urine normal sample
UE
: Urine emergency sample
UP
: Urine stat sample
X_
: Other normal sample
XE
: Other emergency sample
XP
: Other Stat sample
----------------------------------------------------------------
12)ONLINE SAMPLE No. MISMATCH [ aaaaaa <> bbbbbb ]
- 61 -
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for the other samples within the run.
<Description>
(1).When receiving the test requisition information text using online, sample type of this does not match the required sample.
(2).The display of [ ] and its meaning are as follows.
aaaaaaa
: Transferred sample type and sample No.
--------------------------------------------------------------__ nnnn
: Normal sample
_E nnnn
: Emergency sample
_P nnnn
: Stat sample
U_ nnnn
: Urine normal sample
UE nnnn
: Urine emergency sample
UP nnnn
: Urine stat sample
X_ nnnn
: Other normal sample
XE nnnn
: Other emergency sample
XP nnnn
: Other Stat sample
--------------------------------------------------------------bbbbbb
: Received sample type and sample No.
--------------------------------------------------------------__ nnnn
: Normal sample
_E nnnn
: Emergency sample
_P nnnn
: Stat sample
U_ nnnn
: Urine normal sample
UE nnnn
: Urine emergency sample
UP nnnn
: Urine stat sample
X_ nnnn
: Other normal sample
XE nnnn
: Other emergency sample
XP nnnn
: Other Stat sample
---------------------------------------------------------------
- 62 -
13)ONLINE RACK No. MISMATCH [ aaaaaa : bbbb <> cccc ]
<Operation>
(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "STOP",
the following events occur:
1).Disregard the test requisition information text for the sample generating the alarm.
2).System will not receive text for samples following the sample generating the alarm.
3).In a case when the text requisition is received in real-time, the "STOP" is ignored and the text requisition text
will be received with real-time again during the next analysis.
(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "Continue",
the following events occur:
1).Disregard the test requisition information text for the sample generating the alarm.
2).The test requisition information text for the next sample will be received.
<Description>
(1).When receiving the test requisition information text using online, rack No. of this does not match the required sample.
(2).The display of [ ] and its meaning are as follows.
aaaaaaaaa : Transferred sample type and sample No.
--------------------------------------------------------------__ nnnn
: Normal sample
_E nnnn
: Emergency sample
_P nnnn
: Stat sample
U_ nnnn
: Urine normal sample
UE nnnn
: Urine emergency sample
UP nnnn
: Urine stat sample
X_ nnnn
: Other normal sample
XE nnnn
: Other emergency sample
XP nnnn
: Other Stat sample
--------------------------------------------------------------bbbb
: Transferred rack No.
--------------------------------------------------------------cccc
: Received rack No.
--------------------------------------------------------------14)ONLINE MISMATCH [ aaaaaaaaaa <> bbbbbbbbbbb ]
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for the other samples within the run.
<Description>
(1).When receiving the test requisition information text using online, sample ID of this text does not match
the required ones.
(2).The display of [ ] and its meaning as follows.
aaaaaaaaa
: Transferred sample ID
bbbbbbbbb
: Received sample ID
- 63 -
15)ONLINE ITEM ERROR [ aaaaaaaa ]
<Operation>
(1).Disregard the test requisition information text for the sample generating the alarm.
(2).Continue to receive the test requisition information text for the other samples within the run.
<Description>
(1).When receiving the test requisition information text using online, the test requisition cannot be stored.
(2).The display of [ ] and its meaning are as follows.
aaaaaa
: Sample type and sample No.
--------------------------------------------------------------__nnnn
: Normal sample
__Ennn
: Emergency sample
__Pnnn
: Stat sample
_U_nnn
: Urine normal sample
_UEnnn
: Urine emergency sample
_UPnnn
: Urine stat sample
_Xnnnn
: Other normal sample
_XEnnn
: Other emergency sample
_XPnnn
: Other Stat sample
H_nnnn
: repeat run normal sample
H_Ennn
: repeat run emergency sample
H_Pnnn
: repeat run stat sample
HUnnnn
: repeat run urine normal sample
HUEnnn
: repeat run urine emergency sample
HUPnnn
: repeat run urine stat sample
HXnnnn
: repeat run other normal sample
HXEnnn
: repeat run other emergency sample
HXPnnn
: repeat run other stat sample
---------------------------------------------------------------
- 64 -
16)ONLINE RERUN ITEM ERROR [ aaaaaaaa ]
<Operation>
(1).Disregard the repeat run test requisition information for the sample generating the alarm.
(2).Continue to receive the test requisition information text for the other samples within the run.
<Description>
(1).When receiving the test requisition information text for repeat run using online, repeat run test requisition cannot be
stored with for the following reasons.
1).Original sample that is designated in the repeat run text is not stored in the normal run/sample test requisition
information.
2).Sample No. is not set to the original sample that is designated in the repeat run text.
3).Original sample that is designated in the repeat run text has already been stored as a repeat run sample
for another sample.
(2).The display of [ ] and its meaning are as follows.
---------------------------------------------------------------aaaaaa
: sample type and original sample No.
__nnnn
: Normal sample
__Ennn
: Emergency sample
__Pnnn
: Stat sample
_Unnnn
: Urine normal sample
_UEnnn
: Urine emergency sample
_UPnnn
: Urine stat sample
_Xnnnn
: Other normal sample
_XEnnn
: Other emergency sample
_XPnnn
: Other Stat sample
----------------------------------------------------------------
- 65 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement