3M MP8670 Owner's Manual

3M MP8670 Owner's Manual
MP8670 Multimedia Projector
Operator's Guide
MP8670 Projecteur multimédia Guide de l'opérateur
MP8670 Multimedia-Projektor Benutzerhandbuch
Proyector de Multimedia MP8670 Manual del Usuario
MP8670 Proiettore Multimediale Manuale dell'operatore
MP8670 Bruksanvisning for multimediaprojektor
E
O
W
P
U
N
M
E
ZO
OM
JE
C
TO
R
M
U
T
E
ON
+
STA
ND
BY
S
CU
FO
+
R
L
A
IN
M
P
P
U
T
T
E
M
P
R
E
S
E
T
MP8670 Multimedia Projector Gebruiksaanwijzing
P
R
O
3 TABL
E
P
R
O
MP
867
0
3
MP
867
0
EPS-84A
Safeguards
................................................................................................................. 3
Warranty
................................................................................................................. 5
Section 1:
Unpack ....................................................................................................... 6
1.1
1.2
1.3
1.4
Section 2:
2.1
2.2
2.3
2.4
Section 3:
3.1
3.2
Section 4:
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
Section 5:
5.1
Section 6:
6.1
6.2
6.3
6.4
Section 7:
7.1
7.2
Contents of Shipping Box ............................................................................................ 6
Optional Accessories ................................................................................................... 6
Keep Your Packing Materials ...................................................................................... 6
What's Next? ................................................................................................................ 6
Product Description .................................................................................. 7
Machine Characteristics ............................................................................................... 7
Part Identification List ................................................................................................. 8
System Setup - Connecting Various Equipment .......................................................... 9
Remote Control Transmitter Identification ................................................................. 11
Basic Operations ........................................................................................ 12
Projector Startup .......................................................................................................... 12
Projector Shutdown ..................................................................................................... 12
Adjustments and Functions ...................................................................... 13
How To Use Height Adjustment Feet .......................................................................... 14
Plug & Play - Function ................................................................................................ 14
Freeze Function............................................................................................................ 14
Magnify Function ........................................................................................................ 14
Picture-in-Picture ......................................................................................................... 14
Menu Navigation ......................................................................................................... 15
SETUP ......................................................................................................................... 16
INPUT .......................................................................................................................... 17
IMAGE ........................................................................................................................ 18
OPT .............................................................................................................................. 19
Maintenance ............................................................................................... 20
Cleaning the Air Filter ................................................................................................. 20
Lamp........................................................................................................... 21
Lamp ............................................................................................................................ 21
Display Lamp Operation Hours ................................................................................... 21
Reset Lamp Hours ....................................................................................................... 21
Replacing the Lamp ..................................................................................................... 22
Troubleshooting ......................................................................................... 23
Symptom/Solution Table ............................................................................................. 23
Message/Solution Table ............................................................................................... 23
Section 8:
Accessories ................................................................................................. 24
Appendix:
Technical Information ............................................................................... A-1
© 3M 1999
ENGLISH
MP8670 Table of Contents
3M™ Multimedia Projector MP8670
1
ENGLISH
2
3M™ Multimedia Projector MP8670
© 3M 1999
Safeguards
ENGLISH
INTENDED USE
Before operating the machine, please read the entire manual thoroughly. The 3M™ Multimedia Projector 8670
was designed, built and tested for use indoors, using 3M™ brand lamps, 3M™ brand ceiling mount hardware
and nominal local voltages. This projector is not intended for household use. The use of other replacement
lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral
equipment and/or create a potentially unsafe operating condition.
IMPORTANT SAFEGUARDS
1.
Read and understand all instructions before using.
Pay particular attention to areas where this
symbol is shown.
WARNING - Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Caution - Indicates a potentially hazardous situation which, if not avoided, could result in
minor or moderate injury. It may also be used to alert against unsafe practices.
✔ Note - Used to emphasize important conditions or details.
2.
Close supervision is necessary when any appliance is used by or near children. Do not leave
appliance unattended while in use.
3.
Never look directly into the projector lens when the lamp is on. The high pressure mercury lamp
produces a strong light which could damage your eyesight.
4.
Care must be taken as burns can occur from touching hot parts.
5.
Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged – until it
has been examined by a qualified service technician.
6.
Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
7.
If any extension cord is necessary, a cord with a current rating at least equal to that of the appliance
should be used. Cords rated for less amperage than the appliance may overheat.
8.
Always unplug appliance from electrical outlet before cleaning and servicing and when not in
use. Grasp plug and pull to disconnect.
9.
To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.
10.
To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified
technician when service or repair work is required. Incorrect assembly can cause electric shock
when the appliance is subsequently used.
11.
Connect this appliance to a grounded outlet.
12.
Do not expose this projector to direct sunlight, or use it outside.
13.
Keep all ventilation openings free of any obstructions.
14.
Always open the lens shutter or remove lens cap when the projection lamp is on.
15.
Do not look directly into light beam of laser pointer. The pointer produces a strong light which could
damage your eyesight.
16.
The projection lamp contains mercury. Always dispose of it in a proper manner according to local
regulations.
17.
To avoid premature lamp failure, do not change the mounting position of the projector
(desktop
ceiling mount or ceiling
desktop mount) and continue to use the same lamp.
18.
Always operate machine on a flat, sturdy surface.
➮
© 3M 1999
➮
3M™ Multimedia Projector MP8670
3
ENGLISH
LOCATION OF PRODUCT SAFETY LABELS
The following safety labels are used on or within the 8670 projector to alert you to items or areas requiring your attention:.
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 670 mm
MAX. OUTPUT: 1mW
CLASS II LASER PRODUCT
AVOID EXPOSURELASER RADIATION IS
EMITTED FROM THIS
APERTURE
Laser Aperture
SAVE THESE INSTRUCTIONS
The information contained in this manual will help you operate and maintain your 3M MP8670 Multimedia Projector.
4
3M™ Multimedia Projector MP8670
© 3M 1999
LIMITED WARRANTY
3M warrants this product against any defects in material and workmanship, under normal usage and storage, for a
period of two years from date of purchase. Proof of purchase date will be required with any warranty claim. In
the event this product is found to be defective within the warranty period, 3M's only obligation and your
exclusive remedy shall be replacement of any defective parts (labor included).
To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects.
In the USA call 1-800-328-1371 for warranty or repair service.
LIMITATION OF LIABILITY
THE FOREGOING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND 3M
SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTIBILITY AND FITNESS. 3M SHALL NOT BE
LIABLE FOR ANY DAMAGES, DIRECT, CONSEQUENTIAL, OR INCIDENTAL, ARISING OUT OF THE USE OR INABILITY
TO USE THIS PRODUCT.
Important: The above warranty shall be void if the customer fails to operate product in accordance with 3M's
written instructions. This warranty gives you specific legal rights and you may have other rights which vary from
state to state.
FCC STATEMENT - CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if
not installed and used in accordance with the instruction manual may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class "A" computing device pursuant to Subpart B of
Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his/her own expense will be required to take whatever measures may be
required to correct the interference.
EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for
EMC (Electro Magnetic Compatibility) and fulfills these requirements.
Video Signal Cables: Double shielded coaxial cables (FCC shield cable) must be used and the outer shield must
be connected to the ground. If normal coaxial cables are used, the cable must be enclosed in metal pipes or in a
similar way to reduce the interference noise radiation.
Video Inputs: The input signal amplitude must not exceed the specified level.
PATENTS, TRADEMARKS & COPY RIGHTS
IBM is a registered trademark of International Business Machines Corporation. Apple Macintosh and Apple
Powerbook are registered trademarks of Apple Computer, Inc. Microsoft and Windows 95 & Windows 98
are registered trademarks, and Windows and Windows for Workgroups are trademarks of the Microsoft
Corporation. Toshiba is a registered trademark of Toshiba Corporation. Kensington is a trademark of
Kensington Corporation. All other products are trademarks or registered trademarks of their respective
companies.
© 3M 1999
3M™ Multimedia Projector MP8670
5
ENGLISH
Warranty
1.1 Contents of Shipping Box
The 3M™ MP8670 Multimedia Projector is shipped with the necessary cables required for standard VCR, PC,
MAC™ II or laptop computer connections. Carefully unpack and verify that you have all of the items shown
below in Figure 1.1.
VIDEO
POSITION
W
PO
U
N
E
E
T
RESET
P
O
R
0
67 R
P8 CTO
M PROJE
E
3 TA B L
M
U
+
Y
DB
AN
ST
N
O
M
S
CU
FO
+
ER
LA
IN
P
M
U
P
T
TE
P
M
R
T
E
S
E
RGB
LASER
STANDBY/ON
M
O
ZO
ENGLISH
Section 1: Unpack
MENU
FREEZE
+
MAGNIFY
–
VOLUME
OFF
Pin P
MUTE
BLANK AUTO
3
TIMER
+
+
FOCUS
ZOOM
–
–
MP
867
0
MP8670 Multimedia
Projector
Remote Control
Transmitter
ON
OFF 2
S-Video Cable
(S-Video mini DIN4-pin)
Power Cord
US, UK, Europe
3-Conductor
Video/Audio Cable
VGA Cable
(15-15 pin M/M)
3
4
5
6
MAC
Adaptor
Stereo
Mini-Jack Cable
Figure 1.1 Inventory of Shipping Box
The shipping carton contains the items illustrated in Figure 1.1. In addition, the following items are also
included, but not shown here. If any of these items are missing, please contact your place of purchase.
•
•
•
PS/2 mouse cable .............. (1)
ADB mouse cable ............. (1)
Serial mouse cable ............ (1)
1.2 Optional Accessories
•
•
RS-232 control cable ........ (1)
USB mouse cable .............. (1)
1.3 Keep Your Packing Materials
✔ Important
Save the shipping box and packing materials in the event the MP8670 should require shipping to a 3M
Service Center for repair.
1.4 What's Next?
After you have unpacked the MP8670 system and identified all the parts, you are ready to set up the projector.
We hope you will enjoy using this high performance product in your meetings, presentations and training
sessions.
This product has been produced in accordance with 3M's highest quality and safety standards to ensure smooth
and trouble free use in the years to come.
6
3M™ Multimedia Projector MP8670
© 3M 1999
2.1 Machine Characteristics
The MP8670 Multimedia Projector integrates ultra-high bright lamp and polysilicon LCD display technology
into a single unit. It accepts input from two different computer sources and one video/audio source and projects a
bright, super crisp image. Switching your presentation from a computer input to a video input, and then back to a
computer input simply requires the push of a button on the remote control keypad or control panel keypad.
The MP8670 Multimedia Projector offers the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
UHB (ultra-high bright) projection lamp
SVGA resolution (3 separate 800 x 600 LCD
panels are used for the R, G and B signals)
Intelligent XGA scaling
(60 Hz and 75 Hz)
Intelligent VGA scaling
Compact size, light weight for portability
RGB (computer video) output terminal
USB, Serial, PS/2 and Apple Desktop Bus
(ADB) mouse emulation
Power zoom and power focus functions
4x digital magnification
Easy to set up and use
Ability to display 16.7 million colors
Two computer input connection
One video input connections
(composite and S-video compatible)
Full function remote control
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Two built-in stereo speakers (1 watt each)
Horizontal and vertical image inverting function
Horizontal and vertical image position control
Digital keystone correction
On screen menu with eight languages
Universal power supply
IR sensor in front and rear for maximum remote
control range
RS-232 control capability
Optional ceiling mount kit
Laser pointer (remote control)
Color balance control for data/video
Mounting holes for optional document camera
Plug & Play compatible
Picture-in-Picture (PinP)
Freeze function
Kensington™ Slot K (Kensington
microsaver needed)
✔ Note
The MP8670 is one of the brightest portable projectors in the marketplace. The brightness of your
machine will vary depending on the ambient room conditions and contrast/brightness settings.
© 3M 1999
3M™ Multimedia Projector MP8670
7
ENGLISH
Section 2: Product Description
ENGLISH
2.2 Part Identification List
VIDEO
RGB
LASER
STANDBY/ON
POSITION
1
RESET
MENU
FREEZE
+
MAGNIFY
–
VOLUME
OFF
Pin P
MUTE
BLANK AUTO
2
TIMER
+
+
FOCUS
ZOOM
–
–
E
W
O
P
U
N
N
O
Y
DB
AN
ST
T
U
M
M
O
ZO
E
+
10
R
TO
0
67
P8
M
EC
OJ
LE
AB
PR
3
RT
O I
1
RGB IN
2
S-VIDEO IN
9
VIDEO IN
CONTROL
PO
12
E
M
S
CU
FO
+
R
L
A
IN
P
P
M
U
T
T
E
P
M
R
E
S
E
T
3
RGB OUT
AUDIO IN
R
MONO
AUDIO IN
1
2
R
AUDIO
OUT
USB
3
MD05551
MD05401
MP
867
0
4
11
8
5
7
6
EPS-88A
Figure 2.1 Identifying MP8670 Parts
1.
2.
3.
4.
5.
6.
7.
8.
8
Remote control transmitter
Control panel keypad
a) STANDBY/ON button
b) ON, LAMP, TEMP Indicators
c) INPUT, MUTE, RESET buttons
d) MENU buttons
Stereo speakers
Cooling fan exhaust
Carry handle
Height adjustment feet
Air filter cover
Projection lens
9. Remote control sensors (front/back)
10. Terminal connection panels
a) S-Video, Video, Audio inputs
b) RGB1 and RGB2 inputs
c) RGB output
d) Audio L/R input, Audio output
(stereo mini jack)
e) RS-232, PS/2, Serial, ADB Control
f) USB Port (must use USB mouse cable,
optional)
11. AC input-power cord connection
12. Main power switch
3M™ Multimedia Projector MP8670
© 3M 1999
WHT RED
ENGLISH
2.3 System Setup - Connecting Various Equipment
YEL WHT RED
VCR
Laser Disc
OUT OUT OUT
OUT OUT OUT
S-VIDEO IN
S-VHS
IN
VIDEO IN
IN
AUDIO IN
Audio Right
IN
Audio Left
IN
Audio L/R
Video
IN
R
MONO
IN
R
MD05551
MAC
OUT
O I
1
RGB IN
2
S-VIDEO IN
MONITOR
PORT
VIDEO IN
CONTROL
RGB OUT
AUDIO IN
R
Laptop
MONO
AUDIO IN
1
2
R
AUDIO
OUT
USB
MD05551
MD05401
Power
MAC PC
RGB
IN
1
MONITOR
PORT
PC
CONTROL
PS/2 or
SERIAL
PORT
OUT
RGB IN
2
RGB IN
RGB OUT
RGB
OUT
CONTROL
AUDIO 1
AUDIO IN
1
2
IN
CRT
Display
AUDIO
OUT
USB
AUDIO 2
IN
OUT
SPEAKERS
EPS-89A
Figure 2.2 Cable Connections
Caution
Turn power off to all devices before making connections. Never plug anything into the projector or
computer while any device is in operation.
The MP8670 must be powered down when making connections. The mouse emulation may not work if
the unit is not powered down before the mouse cable connections are made.
© 3M 1999
3M™ Multimedia Projector MP8670
9
ENGLISH
2.3 System Setup - Connecting Various Equipment (continued)
Apple™ Desktop Mouse - The Macintosh operating system should recognize the MP8670 as a mouse
without any drivers being loaded.
VirtualMouse for PC Computer - For IBM™ compatible computers, the operating systems will need to
be set to "Serial Mouse," "PS/2 Mouse," or "USB Mouse" to recognize the projector as a mouse pointer
device.
Change mouse driver information to "Serial Mouse," "PS/2 Mouse," or "USB Mouse."
a) Windows™ 95/Windows™ 98 - Click "Start;" select "Settings;" select "Control Panel." Click on
"Mouse;" select the "General" tab; (see what driver is currently loaded and make note of it); select
"Change;" select "Show all devices;" (make note of the current Manufacturer and Model); select
"Standard Mouse Type" for Manufacturer; then select "Standard Serial Mouse," "Standard PS/2
Mouse," or "USB Mouse." Click OK to change and apply the new driver. Restart Windows if
prompted.
b) Windows™ 3.1 - From "Program Manager" click "Main;" then click "Windows Setup," (make note of
what the current mouse driver is); Click "Options;" then "Change Systems Settings." Choose
"Mouse." It should be listed as "Microsoft or IBM PS/2." USB mouse emulation is not supported in
Windows 3.1.
✔ Note
For proper mouse operation, always turn the projector power on first and then power up the computer.
For some laptop computers you may need to disable the internal pointing device (IPD). This is done through
the BIOS level set up of the particular machine, or it could be listed in a "Utilities" program group, i.e., "Toshiba
Utilities™," or "Thinkpad Features™."
10
3M™ Multimedia Projector MP8670
© 3M 1999
ENGLISH
2.4 Remote Control Transmitter Identification
INPUT
LASER
Press the VIDEO or RGB button to select
the input source. Press again to select the
next source.
Press and hold down button to project laser
pointer.
STANDBY/ON
Set main power switch to ON. Press
STANDBY/ON button to begin projection
mode (lamp on) or press and hold button
for 1 second to switch to standby mode
(lamp off).
VIDEO
RGB
LASER
STANDBY/ON
POSITION
CAUTION
To prevent injury to eyesight, do not point
laser beam at other persons or look directly
into laser beam.
POSITION
LEFT MOUSE
Press button then use DISC PAD to move
image (RGB signal only) up/down or left/
right.
Press for left mouse button function
(located on back of remote).
RESET LEFT MOUSE BUTTON
DISC PAD
For menu screens, press DISC PAD to
select menu items. For non-menu screens,
press DISC PAD for mouse shift or left
mouse button function.
MENU
Press to display the menu screen and light
the remote control buttons. The button light
automatically turns off.
RESET
MENU
FREEZE
FREEZE
+
MAGNIFY
–
VOLUME
OFF
PinP
BLANK AUTO
Press button to turn ON/OFF the freeze
image function.
VOLUME
MUTE
Press up to increase or down to decrease
speaker volume.
TIMER
MUTE
Press button to turn the mute function
(speaker sound) ON/OFF.
MAGNIFY
Press the MAGNIFY (+) to enlarge the
center of the display image. Press again
to enlarge image to maximum of 4X
magnification. Press MAGNIFY (-) to
reduce the display image size. Press OFF
to return to normal image size. (Can be
used with the POSITION button to select
the image area being magnified.)
For menu screens, press button to return to
initial settings. For non-menu screens, press
button for right mouse button function.
+
+
FOCUS
ZOOM
–
–
TIMER
Press button to turn the menu screen timer
ON/OFF. The timer does not display when
the blank function is active.
ZOOM
Press (+) to increase or (-) to decrease the
size of the displayed image.
PinP
AUTO
Press the PinP button to display a video
signal as a small picture-in-picture screen
in the corner of an RGB display. Press it
again to enlarge the picture-in-picture
screen size. Press it a third time to exit
the PinP screen and turn the function OFF.
The position of the picture-in-picture
screen can be controlled by pressing the
POSITION button or from the Image menu.
(Both RGB and Video signals must be
present for the picture-in-picture screen to
operate.)
Press the AUTO button to activate the auto
sync function. The message “AUTO IN
PROGRESS” will display for several
seconds as the projector adjusts the V.
POSIT, H.POSIT. H.PHASE, & H. SIZE
settings. The Auto Sync function will not
operate under the following conditions:
• Initial screen message NO INPUT IS
DETECTED or SYNC IS OUT OF
RANGE is displayed.
• Freeze and Magnify functions have not
been turned off prior to pressing AUTO
button.
• Software application running on your
computer is not set to maximum
screen size prior to pressing AUTO
button.
BLANK ON
Press button to turn ON/OFF the screen
blanking function.
FOCUS
Press (+) or (-) to adjust the image
sharpness.
© 3M 1999
3M™ Multimedia Projector MP8670
11
3.1 Projector Startup
–
ZOOM
+
–
FOCUS
MUTE
+
INPUT
O I
MENU
STANDBY ON
TEMP
RESET
FOCU
S
M
U
T
M
O
ZO
E
+
BY
ND
STA
N
O
M
E
N
U
+
ER
W
PO
LA
IN
P
P
M
U
T
P
M
TE
R
E
S
E
T
POWER LAMP
R
0
67
P8
M
CTO
OJE
BLE
3
RTA
3
PO
PR
MP
867
0
EPS-91A
Figure 3.1 Projector Controls
1.
Make all cable connections and line hookups with the power off.
2.
Turn the POWER SWITCH
O I
of the projector on. The ON indicator will light up orange.
STANDBY ON
3.
Press the STANDBY/ON button
. The ON indicator blinks (green) and then lights (green).
The ON indicator will blink green during warm-up and lamp ignition. When power is turned off,
there is a 60 second reset period before the STANDBY/ON button will function again.
4.
Adjust the screen size by pressing the ZOOM button.
5.
Adjust the focus by pressing the focus button. – +
Press any other button to make the focus screen disappear.
6.
Turn on all connected equipment. Refer to section 2.3.
7.
Press the INPUT button
on the projector or the INPUT SELECT (VIDEO or RGB) button on the
remote to select the source of the signal to be projected on the screen. The selected signal input is
displayed at the bottom right of the screen. The display will show the last selected input source before
power was turned off.
–
ZOOM
+
FOCUS
INPUT
3.2 Projector Shutdown
STANDBY ON
1.
Press and hold the STANDBY/ON button
for 1 second. The ON indicator blinks orange and the
lamp turns off. After approximately 1 minute, the fan stops and the indicator stays orange.
2.
Turn the MAIN POWER SWITCH
O I
ENGLISH
Section 3: Basic Operations
of the projector off.
Caution
Do not turn off the POWER SWITCH before pressing the STANDBY/ON button. After the STANDBY/ON button is
pressed, the fan rotates for about 1 minute to cool the projector.
3.
Attach lens cap to protect projection lens.
4.
Disconnect cables if moving projector to new location.
12
3M™ Multimedia Projector MP8670
© 3M 1999
Section 4: Adjustments and Functions
ENGLISH
4.1 How To Use Height Adjustment Feet
Adjust the image elevation using the height adjustment at the front of the projector.
1.
Raise the front end of the projector so the feet are not touching the table top.
2.
Push the lock button to unlock the foot.
3.
Extend or retract each foot to the desired height.
4.
Release the lock button to lock the foot into position.
5.
For fine adjustments, rotate each foot.
Caution
Do not unlock the foot adjusters if the projector is not supported. If the foot adjusters do not lock
completely, turn the foot adjusters slightly before locking.
Front View
3 MP8670
Side View
2
RGB IN
1
S-VIDEO IN
O I
VIDEO IN
CONTROL
RGB OUT
AUDIO IN
R
MONO
R
AUDIO IN
2
1
AUDIO
OUT
USB
MD05551
MD05401
0-9 O
Figure 4.1 Height Adjustment
© 3M 1999
3M™ Multimedia Projector MP8670
13
ENGLISH
4.2 Plug & Play Function
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is VESA
DDC (Display Data Channel) compatible. Plug & play is a system configured with peripheral equipment
including a computer and display, and a compatible operating system.
✔ Note
Use the RGB cable included with this projector when using plug & play. With other cables, pins (12) - (15) are
sometimes not connected (effective only for RGB1).
4.3 Freeze Function
The Freeze function is used to display (freeze) a single frame of the image being projected. This function can be
used together with the Magnify function to freeze the image and then enlarge (magnify) part of the image to view
it in greater detail. Press the FREEZE button repeatedly to engage and disengage this function.
✔ Note
The POSITION icon does not display when the freeze function is engaged and the screen cannot be moved
with the DISC PAD. Some menu items are not operational while the Freeze function is engaged.
4.4 Magnify Function
The Magnify function is used to enlarge a portion of the display image. Press the MAGNIFY (+) button to
magnify the center of the displayed image. Press again to magnify to 4x. Press the MAGNIFY (-) button to
reduce image size. Press OFF to return to normal image size. To move the display area being magnified, press the
POSITION button, then use the DISC PAD to move the magnified area up, down, left or right.
✔ Note
To return to normal display, press the MAGNIFY OFF button or press the INPUT SELECT. Some menu items are
not operational while the Magnify function is engaged.
4.5 Picture-in-Picture
The PinP button on the remote control is used to display a video signal image in the RGB signal image. Press the
PinP button to display the PinP screen (small size). Press again to increase the screen size (maximum size
screen). Press a third time to exit the function and remove the PinP screen.
[small screen size ➔ maximum screen size ➔ OFF]
Both RGB and Video signals must be present for the picture-in-picture function to operate.
1. Select RGB1 or RGB2 input.
2. Start the video input source.
3. Press the PinP button on the remote control to display a small PinP screen in the corner of the projector
image. Press the PinP button again to enlarge the size of the screen display to maximum.
4. Press the POSITION button on the remote control to change the location of the PinP screen. The
position of the picture-in-picture screen can also be changed from the Image menu.
5. Press the PinP button a third time to exit the function and remove the PinP screen from the projector
image.
14
3M™ Multimedia Projector MP8670
© 3M 1999
ENGLISH
4.6 Menu Navigation
MENU
Figure 4.2 Menu Button
1.
Press any MENU button on projector or remote control MENU button.
On-screen menus are displayed on the screen.
2.
Select the menu to be adjusted using the MENU (
Selected Menu is highlighted.
3.
Select the item to be adjusted using the MENU (
Highlighted items may be adjusted.
) buttons or DISC PAD.
) buttons or DISC PAD.
✔ Note
Separate settings are provided for the VIDEO1, VIDEO2, RGB1 and RGB2 input terminals. Adjustments are
saved after power off.
SETUP
Factory Default Setting:
INPUT
IMAGE
OPT.
VOLUME
To reset a single item from SETUP menu:
1.
Select the adjustment item (bright, contrast...).
2.
Press the RESET button. Only the selected item resets.
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
Figure 4.3 Default Settings
© 3M 1999
3M™ Multimedia Projector MP8670
15
4.7 SETUP
ENGLISH
The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB
(Figure 4.4) or Video (Figure 4.5) menu according to the input source being projected.
RGB signal input
SETUP
INPUT
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL R
COLOR BAL B
Video signal input
IMAGE
SETUP
OPT.
121
57
7
800
Figure 4.4 RGB Signal
Adjustment Item
VOLUME
BRIGHT
(BRIGHTNESS)
CONTRAST
Details of Adjustment
Decrease
Dark
Lower
INPUT
IMAGE
OPT.
VOLUME
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
H SIZE
COLOR BAL R
COLOR BAL B
Figure 4.5 Video Signal
Freeze On
Magnify On
Both On
Increase
Adjustable
Adjustable
Adjustable
Bright
Adjustable
Adjustable
Adjustable
Higher
Adjustable
Adjustable
Adjustable
Not Adjustable
Adjustable
Not Adjustable
SHARPNESS
Soft
Sharp
COLOR
Less
More
Not Adjustable
Adjustable
Not Adjustable
Red
Green
Not Adjustable
Adjustable
Not Adjustable
TINT
V.POSIT
(V.POSITION)
Moves the picture up or down.*
Not Adjustable
Not Adjustable
Not Adjustable
H.POSIT
(H.POSITION)
Moves the picture left or right.*
Not Adjustable
Not Adjustable
Not Adjustable
H.PHASE
Decreases the picture flicker.*
Not Adjustable
Adjustable
Not Adjustable
Widens or Narrows the horizontal
size of picture.*
Not Adjustable
Not Adjustable
Not Adjustable
H.SIZE
COLOR BAL R
Less red
More red
Adjustable
Adjustable
Adjustable
COLOR BAL B
Less blue
More blue
Adjustable
Adjustable
Adjustable
*Auto Sync Function: Press the AUTO button on the remote control to engage the automatic sync function. The
message “AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT,
H.POSIT. H.PHASE, & H. SIZE settings.
.
•
•
•
•
•
16
✔ Note
TINT cannot be adjusted with a PAL or M-PAL video signal input.
TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.
V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.
Menu operation is not possible during magnify or freeze functions.
Displaying the Setup menu will cancel the magnify and freeze functions.
3M™ Multimedia Projector MP8670
© 3M 1999
4.8 INPUT
SETUP
INPUT
RGB
VIDEO
IMAGE
ENGLISH
The INPUT sub-menu is used to select the RGB or video input source. The RGB values are shown in figure 4.6.
The VIDEO values are shawn in figure 4.7.
OPT.
FH: 48.3
FV: 60
SETUP
KHz
Hz
IMAGE
OPT.
RGB
VIDEO
Figure 4.6 Input Menu - RGB
© 3M 1999
INPUT
AUTO
NTSC
PAL
SECAM
NTSC4.43
M-PAL
N-PAL
Figure 4.7 Input Menu - Video
Adjustment
Area
Value
RGB
Displays the following RGB inputs:
FH: horizontal sync frequency
FV: vertical sync frequency
Video
Selects the VIDEO signal format Auto,
NTSC, PAL, SECAM,
NTSC 4.43, M-PAL, N-PAL
3M™ Multimedia Projector MP8670
17
4.9 IMAGE
ENGLISH
The IMAGE sub-menu is used to change the image characteristics.
SETUP
INPUT
IMAGE
OPT.
SETUP
KEYSTONE
KEYSTONE
MIRROR
MIRROR
BLANK
BLANK
START UP
START UP
P.IN P. POS
P.IN P. POS
SETUP
INPUT
IMAGE
OPT.
KEYSTONE
MIRROR
BLANK
START UP
INPUT
IMAGE
OPT.
WHITE
BLUE
BLACK
BLANK
START UP
P.IN P. POS
INPUT
IMAGE
OPT.
SETUP
KEYSTONE
MIRROR
MIRROR
BLANK
P.IN P. POS
OPT.
MIRROR
KEYSTONE
START UP
IMAGE
KEYSTONE
NORMAL
H: INVERT
V: INVERT
H&V: INVERT
P.IN P. POS
SETUP
SETUP
INPUT
INPUT
IMAGE
OPT.
BLANK
TURN ON
TURN OFF
START UP
P.IN P. POS
Figure 4.8 Image Adjustment Screens
Adjustment
Screen
KEYSTONE
Reduce distortion
at bottom of image.
Reduce distortion
at top of image.
MIRROR
Inverts the picture horizontally or vertically.
H: INVERT Inverts the picture horizontally.
V: INVERT Inverts the picture vertically.
H&V: INVERT Inverts the picture horizontally and vertically.
BLANK
Selects the blank color.
STARTUP
P. IN P. POS
18
Value
Enable / disable startup screen
Change the picture in picture screen display position.
3M™ Multimedia Projector MP8670
© 3M 1999
4.10 OPT.
SETUP
SETUP
INPUT
IMAGE
OPT.
SETUP
COM. SPEED
COM. BITS
COM. BITS
TIMER
TIMER
LANGUAGE
LANGUAGE
AUTO OFF
AUTO OFF
A. ADJUST
A. ADJUST
SYNC ON G
SYNC ON G
INPUT
IMAGE
OPT.
SETUP
COM. SPEED
LANGUAGE
AUTO OFF
AUTO OFF
A. ADJUST
A. ADJUST
SYNC ON G
SYNC ON G
IMAGE
OPT.
SETUP
INPUT
COM. SPEED
COM. SPEED
COM. BITS
COM. BITS
TIMER
10 min.
IMAGE
OPT.
LANGUAGE
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
NORSK
NEDERLANDS
JAPANESE
AUTO OFF
A. ADJUST
SYNC ON G
INPUT
IMAGE
OPT.
AUTO OFF
0 min.
A. ADJUST
SYNC ON G
SETUP
INPUT
COM. SPEED
COM. SPEED
COM. BITS
COM. BITS
TIMER
TIMER
LANGUAGE
LANGUAGE
AUTO OFF
SYNC ON G
OPT.
TIMER
LANGUAGE
A. ADJUST
IMAGE
TIMER
LANGUAGE
INPUT
OPT.
1200
2400
4800
9600
19200
COM. BITS
7N1
8N1
TIMER
SETUP
INPUT
IMAGE
COM. SPEED
COM. BITS
SETUP
INPUT
COM. SPEED
ENGLISH
The OPT. sub-menu allows you to control communication function.
IMAGE
OPT.
AUTO OFF
TURN ON
TURN OFF
A. ADJUST
SYNC ON G
TURN ON
TURN OFF
Figure 4.9 OPT Adjustment Screens
Adjustment
Screen
Value
Default
COM. SPEED
Selects the data speed of transmission. (For mouse emulation-1200)
1200
COM. BITS
Selects the data format of transmission.
7N1... 7 data-bits, No parity, 1 stop bit. (For mouse emulation-7N1)
8N1... 8 data-bits, No parity, 1 stop bit.
7N1
TIMER
LANGUAGE
AUTO OFF
Sets the timer ( 0-99 minutes).
—
Selects the language on-screen menu. (English, French, German,
Spanish, Italian, Norwegian, Netherlands, Japanese)
—
Selects how long projector will stay on in minutes, if no input is detected.
—
Select 0 to disable this function.
AUTO ADJUST
SYNC ON G
© 3M 1999
Sets the auto-adjustment function to ON/OFF.
Sets the SYNC on G function to ON/OFF.
3M™ Multimedia Projector MP8670
19
5.1 Cleaning the Air Filter
✔ Note
Clean the air filter about every 50 hours, if air is restricted due to dust accumulation on filter, the projector may
shut down due to overheating.
1. Turn off the MAIN POWER switch of the projector and pull out power cord (1). Let cool for
20 minutes.
2. Push tab (2) and remove the air filter cover (3) from the front of projector.
3. Lift retainer wire (4) and carefully remove foam air filter (5).
4. Vacuum (6) dust and dirt from filter.
5. Re-install air filter and replace air filter door.
1
O
P
U
N
E
T
U
M
0
67
P8
M
3
RT
3
3
PO
OR
CT
JE
RO
EP
M
O
ZO
E
+
Y
DB
AN
ST
N
O
M
S
CU
FO
W
E
+
R
L
A
IN
M
P
P
U
T
T
E
M
P
R
E
S
E
T
Power
AB
L
ENGLISH
Section 5: Maintenance
MP
867
0
4
6
2
5
EPS-97A
Figure 5.1 Remove Air Filter
20
3M™ Multimedia Projector MP8670
© 3M 1999
Section 6: Lamp
ENGLISH
6.1 Lamp
The following symptoms may indicate a lamp in need of replacement:
•
•
LAMP indicator lights up red.
"CHANGE THE LAMP" message appears on the screen.
✔ Note
This lamp contains mercury. Consult your local hazardous waste regulations and dispose of this lamp in a
proper manner.
6.2 Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1. While the projector is running, press and hold the TIMER button on the remote control for 3 seconds.
2. The operating time of the lamp will be displayed. The message "CHANGE THE LAMP, AFTER
REPLACING LAMP RESET THE LAMP TIMER" will appear after the lamp operating hours have
reached the end of the normal lamp life. The message "POWER WILL TURN OFF AFTER 20
HOURS" will appear when 20 or less lamp hours remain. The number of hours left until shut down
will decrease until 0 hour is reached, then power will be turned off.
✔ Note
After normal lamp operating time has expired, the projector will only run for 10 minute intervals when restarted
until the lamp is replaced and the lamp timer is reset. The message "CHANGE THE LAMP" will blink at
projector start up to remind you to change the lamp.
6.3 Reset Lamp Hours
1. To display the total lamp hours, press and hold for 3 seconds, the RESET button on the projector or
Timer button on the remote control.
2. To reset the lamp timer, press the RESET button on the projector or MENU button on the remote
while the total lamp hours are displayed. Use the arrow button on the projector or the DISC PAD to
select 0 (or CANCEL).
© 3M 1999
3M™ Multimedia Projector MP8670
21
6.4 Replacing the Lamp
ENGLISH
WARNING
To reduce the risk of electrical shock, always turn off projector and disconnect power cord before changing
lamp.
Caution
To reduce the risk of severe burns, allow the projector to cool for at least 30 minutes before replacing the
lamp.
To reduce the risk of cuts to fingers and damage to internal components, use caution when removing lamp
glass that has failed and shattered into sharp pieces.
✔ Note
For maximum lamp life, do not apply shock, handle or scratch the lamp glass when it is hot. Also, do not use
an old or previously used lamp as a replacement lamp.
1.
Remove lamp access door: The lamp access door is located on the bottom of the machine.
Use a screwdriver to unscrew the cover retaining screw (1) and gently remove the cover (2) and set it
aside.
2.
Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (3)
✔ Note
All lamp module screws must be loosened. These screws are self-containing screws that cannot be removed
from the lamp module or access door.
3.
Remove lamp module: Carefully slide the lamp module out (4) using steady pressure.
Caution
To reduce the risk of cuts to fingers from sharp metal fittings and/or decreasing image quality by touching
the lens, do not insert hand into the empty lamp compartment when the lamp has been removed.
4.
Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated. Tighten the
lamp module retaining screws (3) to secure the lamp module in place.
Insert the hinge tabs on the bottom of the lamp access door, then close and tighten the retaining screw
(1) to secure the door.
✔ Note
Reset the lamp operation hours. See section 6.3 for details.
1
2
4
3
3
EPS-98A
Figure 6.1 Lamp Module
22
3M™ Multimedia Projector MP8670
© 3M 1999
Section 7: Troubleshooting
Symptom
Cause
ENGLISH
7.1 Symptom/Solution Table
Solution
Power cannot be
turned on.
• The Main power is not turned on.
• The power cord is disconnected.
• 60 seconds have not elapsed since
the power was turned off.
• Turn the MAIN POWER switch on.
• Insert the power cord into an AC socket.
• Wait 60 seconds before turning on power.
No picture and sound.
• The setting of the input source is not
• Set the correct input using the input select button of
correct.
the projector or the remote control.
• RGB/Video/Audio wiring to projector is • Connect the cable to correct input/output source.
not correct.
Sound is heard with no
picture.
• RGB/Video/Audio wiring to projector
is not correct.
• The brightness is set fully to dark.
• Lens cap is on.
• Connect the cable to correct input/output source.
• Press the MENU button and increase BRIGHTNESS.
• Remove lens cap.
Picture is displayed with
no sound.
• Audio wiring to projector is not correct. • Connect the cable to correct input/output source.
• The volume is set to minimum.
• Press the VOL button to increase Volume.
• The unit is muted.
• Press the MUTE button.
Color is weak and tint is
incorrect.
• The color and tint have been adjusted
incorrectly.
• Adjust the color and tint correctly.
Picture is dark.
• The brightness and contrast has not
been adjusted incorrectly.
• The lamp needs to be replaced.
• Adjust the brightness and contrast correctly.
• Replace the lamp with a new one.
Picture is not clear
• Projector is out of focus.
• Adjust the focus and H PHASE.
LAMP indicator lights
red.
• Lamp will not ignite.
• Turn off power and let cool for 20 minutes, then restart.
• If problem persists call your dealer.
LAMP indicator blinks
red.
• Air filter door on bottom of case
is open.
• Ensure air filter door is closed.
TEMP indicator lights
red.
• Temperature inside projector
is too hot.
• Clear blocked ventilation holes.
• Clean air filter.
7.2 Message/Solution Table
Error Message Displays
NO INPUT IS DETECTED.
Cause
The projector is not detecting a signal.
SYNC IS OUT OF RANGE. The horizontal frequency of input signal
exceeds projector capability.
Solution
Check cable connections to input device. Input device not
connected to this input mode, switch to next mode.
Switch projector to correct resolution.
See Appendix A.5
CHANGE THE LAMP.
CALL A MAINTENANCE
PERSON.
Nearing end of normal lamp operating time.
Change the projector lamp and reset the lamp operation
hours to zero.
CHANGE THE LAMP.
CALL A MAINTENANCE
PERSON.
THE POWER WILL TURN
OFF AFTER * HR.
Remaining lamp operation time = 20 hours
or less.
Change the projection lamp and reset the lamp operation
hours to zero.
CHANGE THE LAMP.
(Blinking message)
Normal lamp operating time has expired.
Safety feature shuts projector down after 10
minutes.
© 3M 1999
*Indicates number of hours until power turns
off automatically.
3M™ Multimedia Projector MP8670
Change the projector lamp and reset the lamp operation
hours to zero.
23
ENGLISH
Section 8: Accessories
8.1 Service Information
For product information, product assistance, service information, or to order accessories, please call:
In U.S. or Canada: 1-800-328-1371
In other locations, contact your local 3M Sales office.
Accessories
Part Number
Ultra-high performance lamp module, 190 W . . . . . . . . . . . . . . .
Power cord (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cord (UK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cord (Germany) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VGA cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S-video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-conductor video/audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS/2 mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADB mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stereo mini jack cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Not Included with Basic Packet
Ceiling mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustable height suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shipping case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Soft carry case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RS-232 control cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document Camera - 120 VAC 60 Hz (optional) . . . . . . . . . . . . . .
Document Camera - 220 VAC 50 Hz (optional) . . . . . . . . . . . . . .
78-6969-8588-3
26-1011-8852-7
78-8118-3304-1
78-8118-3303-3
78-8118-3401-5
26-1011-3308-2
26-1011-3419-0
78-8118-3306-6
78-8118-3426-2
78-8118-3424-7
78-8118-3425-4
26-1012-0683-2
78-8118-3534-3
Part Number
78-6969-8748-2
78-6969-8312-7
78-6969-8584-1
78-6969-8585-8
78-8118-3312-4
78-8118-8186-7
78-6969-8578-3
78-6969-8724-3
How to Order
Please order these parts through your dealer, or contact 3M Customer Service at the following number:
In U.S. or Canada: 1-800-328-1371
In other locations, contact your 3M Sales office.
---------------------------------------------------------------------------------------------------------------------------------------The contents of this manual are subject to revision without prior notice.
3M assumes no responsibility for the infringement of special rights of a third party or other rights that may arise
out of the information contained in this manual.
Reproduction of this manual in any form without prior permission is strictly prohibited.
3M will replace the manual if any pages are missing or collated incorrectly.
24
3M™ Multimedia Projector MP8670
© 3M 1999
Appendix: Technical Information
Table of Contents
A.1
A.2
A.3
A.4
A.5
A.6
A.7
Technical Specifications
Dimensions
Projector-to-Screen Distance
Connection to the Video Signal Terminal
Connection to the RGB Signal Terminal
Indicator Status
Connection to the Control Signal Terminal
A.1 Technical Specifications
✔ Note
All specifications are subject to change without notice.
Product name
Multimedia projector
Model Name
MP8670
Display system
3 LCD panels, RGB shutter system.
Panel size
33 mm (1.3 in.)
Drive system
TFT active matrix
Number of pixels
480,000 pixels (V600 × H800) per panel.
1.44 million total pixels with 3 panels.
Lens
F/Number: F/1.7 – F/2.3
Lamp
Ultra-high brightness lamp 190W, UHB
Speaker (stereo)
2 x 1 watt
Power supply
AC100 ∼ 120V, 3.7A / AC220 ∼ 240V, 1.5A (Universal)
Power consumption
320W
Operating temperature range
32° ∼ 95°F (0° ~ 35°C)
Dimensions
11.5 in. (W) x 5 in. (H) x 13.8 in. (D)
289 mm (W) x 124 mm (H) x 345 mm (D)
Weight
5.9 kg (13 lbs.)
Input/Output
terminal
© 3M 1999
video signal input
terminal
S VIDEO : Mini DIN 4pin terminal
VIDEO : RCA Jack terminal
AUDIO : RCA Jack terminal
RGB input/output
signal terminal
RGB signal : D-sub 15pin (Female)
AUDIO
: Stereo mini jack
Control terminal
D-sub 15pin (Male)
3M™ Multimedia Projector MP8670
Focal Length: F = 49 – 64 mm (2 in. – 2.5 in.)
(D) Does not include lens.
A-1
TECHNICAL
Liquid crystal
panel
A.2 Dimensions
O I
POWER LAMP
TEMP
STANDBY ON
PORTABLE PROJECTOR
3 MP8760
RESET
MENU
MUTE
ZOOM
INPUT
+
FOCUS
+
1
AUDIO
OUT
CONTROL
AUDIO IN
1
2
345 mm
(13.8 in.)
RGB IN
2
RGB OUT
USB
MOUSE
S-VIDEO IN
VIDEO IN
R
AUDIO IN
R
MONO
MD05551
MD05401
289 mm
(11.5 in.)
3 MP8670
124 mm
68 mm (5 in.)
(2.7 in.)
TECHNICAL
31 mm
(1.2 in.)
A-2
3M™ Multimedia Projector MP8670
EPS-99A
© 3M 1999
A.3
Projector-to-Screen Distance
Example of the Multimedia projector and screen installation. Determine picture size and projection distance as
shown below.
Width
81 cm
(32 in.)
122 cm
(48 in.)
163 cm
(64 in.)
203 cm
(80 in.)
244 cm
(96 in.)
305 cm
(120 in.)
406 cm
(160 in.)
Screen Size
Height
61 cm
(24 in.)
91 cm
(36 in.)
122 cm
(48 in.)
152 cm
(60 in.)
183 cm
(72 in.)
229 cm
(90 in)
305 cm
(120 in.)
Diagonal
102 cm
(40 in.)
152 cm
(60 in.)
203 cm
(80 in.)
254 cm
(100 in.)
305 cm
(120 in.)
381 cm
(150 in.)
508 cm
(200 in.)
Distance to Screen
Minimum
Maximum
140 cm
186 cm
(4.6 ft)
(6.1 ft)
216 cm
290 cm
(7.1 ft)
(9.5 ft)
290 cm
384 cm
(9.5 ft)
(12.6 ft)
366 cm
485 cm
(12.0 ft)
(15.9 ft)
448 cm
588 cm
(14.7 ft)
(19.3 ft)
558 cm
716 cm
(18.3 ft)
(23.5 ft)
741 cm
981 cm
(24.3 ft)
(32.2ft)
© 3M 1999
3M™ Multimedia Projector MP8670
A-3
TECHNICAL
✔ Note
These sizes are ± 1%. This is due to variations in the manufacture of the lens. If you are close to one of the
endpoints you should verify with your unit that the image is the proper size at the proper distance.
A.4 Connection to the Video Signal Terminal
a)
Input signal
S-VIDEO signal
Luminance signal
Chrominance signal
VIDEO signal
1.0Vp-p, 75Ω termination
AUDIO signal
b)
Signal input terminal
1.0Vp-p, 75 Ω termination
0.286Vp-p (burst signal), 75 Ω termination
Input
200mVrms, 20 kΩ below (MAX 3.0Vp-p)
Output
0~200mVrms, 1k Ω
Chrominance signal
Ground
Luminance signal
Ground
S VIDEO input (Mini DIN 4pin)
✔ Note
Video input signal terminals have priority in the following order:
1. S-VIDEO input terminal
2. RCA jack (composite) input terminal
Audio sound from input devices is output to the RGB/Video out jack.
A.5 Connection to the RGB Signal Terminal
a)
Input signal / Output signal
Video signal
Analog 0.7Vp-p 75 Ω termination (Positive polarity)
Horizontal sync signal
TTL level (Positive/negative polarity)
Vertical sync signal
TTL level (Positive/negative polarity)
Composite sync signal TTL level
Audio signal
TECHNICAL
b)
A-4
Input
200mVrms, 20k Ω below (MAX 3.0Vp-p)
Output 0 ∼ 200mVrms, 1k Ω
Signal input terminal / output terminal
1
Video signal (Red)
9
No Connection
2
Video signal (Green)
10 Ground
3
Video signal (Blue)
11 No Connection
4
No Connection
12 SDA (DDC 1/2B)
5
No Connection
13 Horizontal/Composite sync signal
6
Ground (for R)
14 Vertical sync signal
7
Ground (for G)
15 SCL (DDC 1/2B)
8
Ground (for B)
3M™ Multimedia Projector MP8670
© 3M 1999
c)
Example of computer signal
Resolution HxV
Refresh Rate
Horizontal
Standard Type
Note
Frequency
Display
Dots HxV
640 x 350
85.1 Hz
37.9 kHz
VGA-1
800 x 490
640 x 400
56.4 Hz
24.8 kHz
NEC PC9800
800 x 560
640 x 400
85.1 Hz
37.9 kHz
VGA-2
800 x 560
640 x 480
85.0 Hz
43.3 kHz
VESA
VGA-3 (85 Hz)
800 x 600
640 x 480
59.9 Hz
31.5 kHz
VESA
VGA-3
800 x 600
640 x 480
66.7 Hz
35.0 kHz
MAC 13"
800 x 600
640 x 480
72.8 Hz
37.9 kHz
VESA
VGA-3 (72 Hz)
800 x 600
640 x 480
75.0 Hz
37.5 kHz
VESA
VGA-3 (75 Hz)
800 x 600
720 x 400
85.0 Hz
37.9 kHz
VESA
TEXT
800 x 600
56.3 Hz
35.2 kHz
VESA
SVGA (56 Hz)
800 x 600
800 x 600
60.3 Hz
37.9 kHz
VESA
SVGA (60 Hz)
800 x 600
800 x 600
72.2 Hz
48.1 kHz
VESA
SVGA (72 Hz)
800 x 600
800 x 600
75.0 Hz
46.9 kHz
VESA
SVGA (75 Hz)
800 x 600
800 x 600
85.1 Hz
53.7 kHz
VESA
SVGA (85 Hz)
800 x 600
832 x 624
74.5 Hz
49.7 kHz
MAC 16"
800 x 600
1024 x 768
60.0 Hz
48.4 kHz
XGA (60 Hz)
768 x 576
VESA
Compressed
1024 x 768
70.1 Hz
56.5 kHz
VESA
XGA (70 Hz)
768 x 576
Compressed
1024 x 768
75.0 Hz
60.0 kHz
VESA
XGA (75 Hz)
768 x 576
Compressed
Note 1: MAC adapter is necessary to set the resolution mode.
Projector is compatible with 13 inch mode and 16 inch mode.
Set all dip switches OFF except those indicated below.
MAC 13" mode = switch 1 and 2 are ON
MAC 16" mode = switch 2 and 4 are ON
(Example of 16 inch mode)
© 3M 1999
3M™ Multimedia Projector MP8670
A-5
TECHNICAL
Note 2: Some input sources may not be displayed properly because they are not compatible with the projector.
A.6 Indicator Status
The ON, LAMP and TEMP indicators will light or blink in the following cases:
ON
LAMP
TEMP
MEANING
REMEDY
INDICATOR
INDICATOR
INDICATOR
Lights orange
Turns off
Turns off
Standby mode
Normal
Flashes green
Turns off
Turns off
During warm up
Normal
Lights green
Turns off
Turns off
During operation
Normal
Flashes orange
Turns off
Turns off
During cooling down
Normal
Lights red
Lights red
Turns off
Lamp does not light
Turn off power and let
projector cool for 45 minutes.
Lights red
Flashes red
Turns off
Lamp or lamp cover
loose or missing.
Fully insert lamp module or
lamp cover and secure with
retaining screws.
Lights red
Turns off
Flashes red
Cooling fan not
operating.
Contact your dealer.
Flashes red
Flashes red
Turns off
The lamp operating
hours have reached
2000 hours or more.
Replace the lamp.
TECHNICAL
*When the LAMP indicator lights or blinks, turn the power off. If the problem persists, contact your dealer.
A-6
3M™ Multimedia Projector MP8670
© 3M 1999
A.7 Connection to the Control Signal Terminal
a)
Mouse emulation
(1) While the projector and computer are turned OFF, connect the projector and the mouse terminal of
computer using an appropriate cable (PS/2, Serial or ADB).
(2) Turn ON the projector.
(3) Turn ON the computer.
(4) Select the correct mouse driver for the application. See computer's User Manual for this procedure.
✔ Note
In some Notebook computers with an internal pointing device, mouse emulation will not work unless the
internal pointing device is disabled. In this case, disable the internal pointing device in BIOS setting. Check
the computer's manual for procedure to follow to disable internal pointing device in BIOS setting.
Caution
Turn off the power to both the projector and computer before connecting. Connect the computer to the
control terminal of the projector using the appropriate cable.
PS/2 mouse
Projector
D-sub 15pin (Female)
1
5
6
SEL0
RTS
10
11
+5V
GND
15
ADB mouse
D-sub 15pin (Female)
1
5
RTS
6
10
© 3M 1999
15
+5V
GND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
3M™ Multimedia Projector MP8670
Computer
DATA
Mini DIN 6pin
6
GND
+5V
CLK
5
4
3
2
1
PS/2 port
Projector
SDATA
11
1
2
3
4
5
6
1
2
3
4
Computer
ADS
(POWER ON)
+5V
GND
Mini DIN 4pin
4
2
3
1
ADB port
A-7
TECHNICAL
CLK
DATA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A.7 Connection to the Control Signal Terminal (continued)
Serial mouse
Projector
D-sub 15pin (Female)
1
5
6
SEL0
RTS
10
11
15
GND
RDP
TDP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
Computer
CD
RD
TD
DTR
GND
DSR
RTS
DTS
RI
(male)
D-sub 9pin
1
5
6
9
Serial Mouse cable
RS-232 Control Cable (not included with basic packout)
This cable is used to directly control the projector without using the Remote Control or Operator's Panel.
Projector
D-sub 15pin (Female)
1
5
6
SEL0
RTS
10
11
15
GND
TECHNICAL
RD
TD
A-8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
Computer
CD
RD
TD
DTR
GND
DSR
RTS
CTS
RI
D-sub 9pin (male)
1
5
6
9
RS-232 Cable
3M™ Multimedia Projector MP8670
© 3M 1999
A.7 Connection to the Control Signal Terminal (continued)
USB Mouse Cable
This cable is used to connect the projector and computer to allow computer mouse control via the projector's
remote control buttons. Connect the cable, select the input source where the computer is to be connected and start
the mouse functions.
USB Mouse Jack
(B Type)
2 1
3 4
Projector
+5V
–DATA
+DATA
GND
Computer
1
2
3
4
1
2
3
4
USB Cable
+5V
–DATA
+DATA
GND
USB Mouse Jack
(A Type)
1 2 3 4
EPS-103A
© 3M 1999
3M™ Multimedia Projector MP8670
A-9
TECHNICAL
✔ Note
Some laptop computers with a built-in pointing device (track ball) may not recognize the external mouse. In this
case, change the BIOS (system setup) so that an external mouse can be selected. Some computers may not
have the necessary utility program to operate a mouse. Refer to the computer hardware manual.
Serial Command Codes
All numbers in this document are in Hexadecimal. You must send at the same communication setting
as the projector and use a null modem serial cable to connect to the projector.
There are four types of messages: 1) ASK, 2) REPLY, 3) SET and 4) DEFAULT.
Ask Code:
User:
20
XX
XX is the attribute you are checking.
Projector:
1Y
XX
Y bytes of data
This is a reply code. The Y is the number of extra bytes that come after the command.
The XX is the same as in the Ask code.
Set Code:
User:
3Y
XX
Y bytes of data
XX is the attribute you are checking. The Y is the number of bytes for the data.
Projector:
1Y
XX
Y bytes of data
This is a reply code. The Y is the number of extra bytes that come after the command.
The XX is the same as in the Set code.
Default Code:
User:
40
XX
XX is the attribute you are checking.
Projector:
1Y
XX
Y bytes of data
This is a reply code. The Y is the number of extra bytes that come after the command.
The XX is the same as in the Ask code.
TECHNICAL
Errors:
For an error, the projector will reply with the same code that was sent but with a 0 in the first nibble.
A-10
3M™ Multimedia Projector MP8670
© 3M 1999
Serial Command Code Table
Command Code
05
# Bytes
1
Communication
06
1
Power
11
1
Zoom
12
1
Focus
13
1
Mirror
14
1
Magnify
15
Set Command
6
Data Code
00
01-7F
0X
1X
X0
X1
X2
X3
X4
3E
3F
01-3F
41-7F
01-3F
41-7F
00
01
02
03
00 00 00 00 00 00
00 00-3C 05
00 00-0D 04
64 00-20 06
Ask Command
1
Freeze
16
1
Input
21
1
Video Type
22
2
Volume
Mute
23
24
1
1
Brightness
31
3
Contrast
32
3
© 3M 1999
00
01
00
01
11
12
21
22
00 00
00 01
00 02
00 03
00 04
00 05
00 06
00-24
00
01
00 00 00 00 00 24
00 00 00 00 00 24
3M™ Multimedia Projector MP8670
Meaning
Stop mouse function
Enable mouse function
8N1
7N1
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
Power off
Power on
Zoom +
Zoom Focus +
Focus Normal
H Invert
V Invert
H & V Invert
X-coordinate = First,
2-bytes (left top corner)
Y-coordinate = Second,
2-bytes (00 00, 00 00)
Magnification = Third,
2-bytes (64 00 is x 8,
20 06 is x1)
Magnify Off
Magnify On
Freeze Off (normal display)
Freeze On
Video 1
Video 2
RGB 1
RGB 2
Auto
NTSC
PAL
SECAM
NTSC 4.43
M-PAL
N-PAL
00 - Softest
Mute off
Mute on
24 is high end of scale
24 is high end of scale
A-11
TECHNICAL
Function
Mouse
Serial Command Code Table (con't)
Function
Color
Command Code
33
# Bytes
3
Tint
34
3
Sharpness
35
3
H. Phase
37
3
H. Position
38
4
H. Size
36
4
V. Position
3A
3
Color Balance R
3B
3
Color Balance B
3D
3
Auto Adjust
3C
1
Blank
41
1
Reveal
42
1
Data Code
00 00 00 00 00 24
00 00 00 00 00 24
00 00 00 00 00 24
00 00 00 00 00 24
00 00 00 01
00 00 52 7F
00 00 00 00
00 00 00 7F
00 00 00 01
00 00 02 7F
00 00 00
00 00 24
00 00 00
00 00 24
00
07
0X
1X
bit 0 - 0
bit 0 - 1
bit 1 - 0
bit 1 - 1
bit 2 - 0
bit 2 - 1
bit 3 - 0
bit 3 - 1
0X
X1
X4
Meaning
24 is high end of scale
24 is green end of scale
24 is sharp end of scale
7F is right end of scale
7F is wide end of scale
02 7F is down
24 is dark red
24 is dark blue
Start
Stop
Blank off
Blank on
Blue off
Blue on
Green off
Green on
Red off
Red on
No change
Change
Stop
Reveal down
Reveal right
TECHNICAL
X is down and right is 0 - 7
with 7 being the fastest
A-12
3M™ Multimedia Projector MP8670
© 3M 1999
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy
or completeness is not guaranteed Before using this product, you must evaluate it and determine if it is suitable for your intended application. You
assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall have no force or effect unless expressly set forth in a written agreement signed by an
authorized officer of 3M.
Warranty and Limited Remedy. This product will be free from defects in material and manufacture for a period of two years from the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Limitation of Liability. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether
direct, indirect, special, incidental or consequential regardless of the legal theory asserted.
Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we're the only
transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call
us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.
3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-9000
3M Canada
P.O. Box 5757
London, Ontario
N6A 4T1
3M Mexico, S.A. de C.V.
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico
3M Europe
Boulevard de l'Oise
95006 Cerge Pontoise Cedex
France
Printed on 50% recycled wastepaper,
including 10% post-consumer
Litho in USA
© 3M 1999
78-6970-8994-0 Rev. A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement