3M MP8770/MP8770L User's Manual

3M MP8770/MP8770L User's Manual
MP8755/MP8755L
MP8770/MP8770L
Multimedia Projector
Operator’s Guide
MP8755/MP8755L/MP8770/MP8770L Projecteur multimédia Guide de l'opérateur
MP8755/MP8755L/MP8770/MP8770L Multimedia-Projektor Benutzerhandbuch
Proyector de Multimedia MP8755/MP8755L/MP8770/MP8770L Manual del Usuario
MP8755/MP8755L/MP8770/MP8770L Proiettore Multimediale Manuale dell'operatore
MP8755/MP8755L/MP8770/MP8770L Bruksanvisning för multimediaprojektor
E
ON
U
M
T
STA
ND
BY
E
M
N
U
A
L
P
M
IN
R
E
W
O
P
U
P
T
T
P
M
E
R
E
S
E
T
MP8755/MP8755L/MP8770/MP8770L Multimedia Projector Gebruiksaanwijzing
AB
LE
EC
TO
+
R
5
75
P8
M
RT
FOC
US
+
PR
OJ
3
PO
ZO
OM
3
MP
875
5
EPS-84A
© 3M IPC 2000
3M™ Multimedia Projector MP8720
1
Table of Contents
Safeguards
................................................................................................................. 3
Warranty
................................................................................................................. 5
Section 1:
Unpack ....................................................................................................... 6
1.1
1.2
1.3
1.4
Section 2:
2.1
2.2
2.3
2.4
Section 3:
3.1
3.2
Section 4:
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
Section 5:
5.1
Section 6:
6.1
6.2
6.3
6.4
Section 7:
7.1
7.2
Section 8:
8.1
Appendix:
ENGLISH
Please click on any section to jump to that section.
Contents of Shipping Box ......................................................................................................... 6
Optional Accessories ................................................................................................................. 6
Keep Your Packing Materials .................................................................................................... 6
What's Next? .............................................................................................................................. 6
Product Description .................................................................................. 7
Machine Characteristics ............................................................................................................ 7
Part Identification List ............................................................................................................... 8
System Setup — Connecting Various Equipment ..................................................................... 9
Remote Control Transmitter Identification ............................................................................... 11
Basic Operations ........................................................................................ 12
Projector Startup ........................................................................................................................ 12
Projector Shutdown ................................................................................................................... 12
Adjustments and Functions ...................................................................... 13
How To Use Height Adjustment Feet ........................................................................................ 13
Plug & Play — Function ........................................................................................................... 14
Freeze Function ......................................................................................................................... 14
Magnify Function ...................................................................................................................... 14
Picture-in-Picture ....................................................................................................................... 14
Menu Navigation ....................................................................................................................... 15
SETUP ....................................................................................................................................... 16
INPUT ........................................................................................................................................ 17
IMAGE ...................................................................................................................................... 18
OPT ............................................................................................................................................ 19
Maintenance............................................................................................... 20
Cleaning the Air Filter ............................................................................................................... 20
Lamp........................................................................................................... 21
Lamp .......................................................................................................................................... 21
Display Lamp Operation Hours ................................................................................................ 21
Reset Lamp Hours ..................................................................................................................... 21
Replacing the Lamp ................................................................................................................... 22
Troubleshooting ......................................................................................... 23
Symptom/Solution Table ........................................................................................................... 23
Message/Solution Table ............................................................................................................. 24
Accessories ................................................................................................. 25
Service Information ................................................................................................................... 25
Technical Information ............................................................................... A-1
The Appendix is in English only. Please click here to read it.
© 3M 2000
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
1
ENGLISH
2
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
Safeguards
ENGLISH
INTENDED USE
Before operating the machine, please read the entire manual thoroughly. The 3M™ Multimedia Projector 8755/
8755L/8770/8770Lwas designed, built and tested for use indoors, using 3M™ brand lamps, 3M™ brand ceiling
mount hardware and nominal local voltages. This projector is not intended for household use. The use of other
replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector
or peripheral equipment and/or create a potentially unsafe operating condition.
IMPORTANT SAFEGUARDS
1.
Read and understand all instructions before using.
Pay particular attention to areas where this
symbol is shown.
WARNING - Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Caution - Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury. It may also be used to alert against unsafe practices.
✔
2.
3.
Note - Used to emphasize important conditions or details.
Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended
while in use.
Never look directly into the projector lens when the lamp is on. The high pressure mercury lamp produces a strong
light which could damage your eyesight.
4.
5.
Care must be taken as burns can occur from touching hot parts.
Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged – until it has been
examined by a qualified service technician.
6.
7.
Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
If any extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used.
Cords rated for less amperage than the appliance may overheat.
8.
Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and
pull to disconnect.
9.
To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.
10.
To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when
service or repair work is required. Incorrect assembly can cause electric shock when the appliance is subsequently
used.
11.
12.
Connect this appliance to a grounded outlet.
Do not expose this projector to direct sunlight, or use it outside.
13.
Keep all ventilation openings free of any obstructions.
14.
15.
Always open the lens shutter or remove lens cap when the projection lamp is on.
Do not look directly into light beam of laser pointer. The pointer produces a strong light which could damage your
eyesight.
16.
17.
The projection lamp contains mercury. Always dispose of it in a proper manner according to local regulations.
To avoid premature lamp failure, do not change the mounting position of the projector (desktop
ceiling mount or
ceiling
desktop mount) and continue to use the same lamp.
18.
Always operate machine on a flat, sturdy surface.
© 3M 2000
➮
➮
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
3
ENGLISH
LOCATION OF PRODUCT SAFETY LABELS
The following safety labels are used on or within the MP8755/MP8755L/MP8770/MP8770L projector to alert you to items
or areas requiring your attention:
CAUTION
LASER RADIATIONDO NOT STARE INTO BEAM
WAVE LENGTH: 650nm
MAX . OUTPUT: 1mW
CLASS 2 LASER PRODUCT
CAUTION
RADIAZIONI LASER
NON GUARDARE NEL RAGGIO LUCE
LASER DI CLASSE 2
LASERAPPARECCHIO
RADIATION
RAYONNEMENT LASER
MANUFACTURED
NE PAS REGARDER DANS
DO NOT
STARE
INTO BEAM
LE FAISCEAU APPAREIL
A LASER DE CLASSE 2
PLACE
OF
WAVE LASER-STRAHLUNG
LENGTH: 670
mm
MANUFACTURER:A
NICHT IN DEN STRAHL
MADE IN JAPAN
BLICKEN LASER KLASSE2
MAX. OUTPUT:
1mW
IEC60825-1:1993+A1:1997
CLASS II LASER PRODUCT
AVOID EXPOSURELASER RADIATION IS
EMITTED FROM THIS
APERTURE
Laser Aperture
SAVE THESE INSTRUCTIONS
The information contained in this manual will help you operate and maintain your 3M MP8755/MP8755L/MP8770/
MP8770L Multimedia Projector.
4
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
LIMITED WARRANTY
3M warrants this product against any defects in material and workmanship, under normal usage and storage, for a period of
two years from date of purchase. Proof of purchase date will be required with any warranty claim. In the event this product
is found to be defective within the warranty period, 3M's only obligation and your exclusive remedy shall be replacement of
any defective parts (labor included).
To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. In the
USA call 1-800-328-1371 for warranty or repair service.
LIMITATION OF LIABILITY
THE FOREGOING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND 3M
SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTIBILITY AND FITNESS. 3M SHALL NOT BE
LIABLE FOR ANY DAMAGES, DIRECT, CONSEQUENTIAL, OR INCIDENTAL, ARISING OUT OF THE USE OR INABILITY
TO USE THIS PRODUCT.
Important: The above warranty shall be void if the customer fails to operate product in accordance with 3M's written
instructions. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
FCC STATEMENT - CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class "A" computing device pursuant to Subpart B of Part 15 of the FCC
Rules, which are designed to provide reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his/
her own expense will be required to take whatever measures may be required to correct the interference.
EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro
Magnetic Compatibility) and fulfills these requirements.
Video Signal Cables: Double shielded coaxial cables (FCC shield cable) must be used and the outer shield must be
connected to the ground. If normal coaxial cables are used, the cable must be enclosed in metal pipes or in a similar way to
reduce the interference noise radiation.
Video Inputs: The input signal amplitude must not exceed the specified level.
PATENTS, TRADEMARKS & COPYRIGHTS
IBM is a registered trademark of International Business Machines Corporation. Apple Macintosh and Apple
Powerbook are registered trademarks of Apple Computer, Inc. Microsoft and Windows 95 & Windows 98
are registered trademarks, and Windows and Windows for Workgroups are trademarks of the Microsoft Corporation.
Toshiba is a registered trademark of Toshiba Corporation. Kensington is a trademark of Kensington Corporation. All
other products are trademarks or registered trademarks of their respective companies.
© 3M 2000
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
5
ENGLISH
Warranty
1.1 Contents of Shipping Box
The 3M™ MP8755/MP8755L/MP8770/MP8770L Multimedia Projector is shipped with the necessary cables required for
standard VCR, PC, MAC™ II or laptop computer connections. Carefully unpack and verify that you have all of the items
shown below in Figure 1.1.
VIDEO
T
POSITION
FOCU
S
JE
C
TO
R
E
T
U
M
M
O
ZO
+
Y
DB
AN
ST
N
O
U
N
E
M
PO
W
+
ER
LA
M
P
T
U
P
IN
TE
M
P
R
E
S
E
RGB
LASER
STANDBY/ON
TA
B
LE
P
R
O
MP
877
0
O
R
RESET
P
ENGLISH
Section 1: Unpack
MENU
FREEZE
+
MAGNIFY
—
VOLUME
OFF
Pin P
MUTE
BLANK AUTO
TIMER
+
+
FOCUS
ZOOM
—
—
MP
877
0
MP8770 Multimedia
Multimedia
Projector
Projector
Remote Control
Transmitter
ON
OFF 2
S-Video Cable
(S-Video mini DIN4-pin)
Power Cord
US, UK, Europe
3-Conductor
Video/Audio Cable
VGA Cable
(15-15 pin M/M)
3
4
5
6
MAC
Adapter
Adaptor
Stereo
Mini-Jack Cable
Figure 1.1 Inventory of Shipping Box
The shipping carton contains the items illustrated in Figure 1.1. In addition, the following items are also included, but not
shown here. If any of these items are missing, please contact your place of purchase.
•
•
•
PS/2 mouse cable .................. (1)
ADB mouse cable ................. (1)
Serial mouse cable ................ (1)
1.2 Optional Accessories
•
•
RS-232 control cable ............ (1)
USB mouse cable ................. (1)
1.3 Keep Your Packing Materials
✔ Important
Save the shipping box and packing materials in the event the MP8755/MP8755L/MP8770/MP8770L should
require shipping to a 3M Service Center for repair.
1.4 What’s Next?
After you have unpacked the MP8755/MP8755L/MP8770/MP8770L system and identified all the parts, you are ready to set
up the projector.
Please read this guide thoroughly before operating your new projector.
Be sure to check our web site (www.3m.com/meetings) regularly for updates and supplemental information. On the CDROM, you can link directly to the web site by clicking here or on “3M Innovation” in the lower right corner of the Main
Menu.
6
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
2.1 Machine Characteristics
The MP8755/MP8755L/MP8770/MP8770L Multimedia Projector integrates ultra-high bright lamp and polysilicon LCD
display technology into a single unit. It accepts input from two different computer sources and one video/audio source and
projects a bright, super crisp image. Switching your presentation from a computer input to a video input, and then back to a
computer input simply requires the push of a button on the remote control keypad or control panel keypad.
The MP8755/MP8755L/MP8770/MP8770L Multimedia Projector offers the following features:
•
UHB (ultra-high bright) projection lamp
•
XGA resolution (3 separate 1024 x 768 LCD
panels are used for the R, G and B signals)
• Horizontal and vertical image inverting
function
• Horizontal and vertical image position control
•
Intelligent XGA scaling (60 Hz and 75 Hz)
• Digital keystone correction
•
Intelligent VGA scaling
• On-screen menu with eight languages
•
Compact size, light weight for portability
• Universal power supply
•
RGB (computer video) output terminal
•
USB, Serial, PS/2 and Apple Desktop Bus
(ADB) mouse emulation
• IR sensor in front and rear for maximum
remote control range
• RS-232 control capability
•
Power zoom and power focus functions
• Optional ceiling mount kit
•
4x digital magnification
• Laser pointer (remote control)
•
Easy to set up and use
• Color balance control for data/video
•
Ability to display 16.7 million colors
• Mounting holes for optional document camera
•
Two computer input connections
• Plug & Play compatible
•
One video input connection
(composite and S-video compatible)
• Picture-in-Picture (PinP)
•
Full function remote control
•
Two built-in stereo speakers (1.2 watts each)
• Freeze function
• Kensington™ Slot K (Kensington microsaver
needed)
✔ Note
The MP8755/MP8755L/MP8770/MP8770L is one of the brightest portable projectors in the
marketplace. The brightness of your machine will vary depending on the ambient room conditions and
contrast/brightness settings.
© 3M 2000
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
7
ENGLISH
Section 2: Product Description
VIDEO
RGB
LASER
STANDBY/ON
POSITION
1
RESET
MENU
FREEZE
+
MAGNIFY
—
VOLUME
OFF
Pin P
2
MUTE
BLANK AUTO
TIMER
+
+
FOCUS
ZOOM
—
—
R
E
W
O
P
U
N
E
N
O
Y
DB
AN
ST
E
T
U
C
JE
O
TO
R
M
O
ZO
M
10
+
12
M
S
CU
FO
+
IN
P
M
A
L
U
P
T
P
M
E
T
R
T
E
S
E
3
O I
1
RGB IN
2
S-VIDEO IN
LE
B
TA
R
O
P
9
VIDEO IN
CONTROL
P
R
MP
877
0
ENGLISH
2.2 Part Identification List
RGB OUT
AUDIO IN
R
MONO
AUDIO IN
1
2
R
AUDIO
OUT
USB
MD05551
MP
877
0
MD05401
4
11
8
5
7
6
EPS-129A
Figure 2.1 Identifying MP8770 Parts
1.
2.
3.
4.
5.
6.
7.
8.
8
Remote control transmitter
Control panel keypad
a) STANDBY/ON button
b) POWER, LAMP, TEMP indicators
c) INPUT, MUTE, RESET buttons
d) MENU buttons
Stereo speakers
Cooling fan exhaust
Carry handle
Height adjustment feet
Air filter cover
Projection lens
9. Remote control sensors (front/back)
10. Terminal connection panels
a) S-Video, Video, Audio inputs
b) RGB1 and RGB2 inputs
c) RGB output
d) Audio L/R input, Audio output
(stereo mini-jack)
e) RS-232, PS/2, Serial, ADB control
f) USB port (must use USB mouse cable,
optional)
11. AC input-power cord connection
12. Main power switch
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
WHT RED
ENGLISH
2.3 System Setup - Connecting Various Equipment
YEL WHT RED
VCR
Laser Disc
OUT OUT OUT
OUT OUT OUT
S-VIDEO IN
S-VHS
IN
VIDEO IN
IN
AUDIO IN
Audio Left
IN
Audio Right
IN
Audio L/R
Video
IN
L
MONO
IN
R
MD05551
MAC
OUT
O I
1
RGB IN
2
S-VIDEO IN
MONITOR
PORT
VIDEO IN
CONTROL
RGB OUT
AUDIO IN
R
Laptop
MONO
AUDIO IN
1
2
R
AUDIO
OUT
USB
MD05551
MD05401
Power
MAC PC
RGB
IN
1
MONITOR
PORT
PC
CONTROL
PS/2 or
SERIAL
PORT
OUT
RGB IN
2
RGB IN
RGB OUT
RGB
OUT
CONTROL
AUDIO 1
AUDIO IN
1
2
IN
CRT
Display
AUDIO
OUT
USB
AUDIO 2
IN
OUT
SPEAKERS
EPS-89A
Figure 2.2 Cable Connections
Caution
Turn power off to all devices before making connections. Never plug anything into the projector or
computer while any device is in operation.
The MP8755/MP8755L/MP8770/MP8770L must be powered down when making connections. The mouse
emulation may not work if the unit is not powered down before the mouse cable connections are made.
© 3M 2000
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
9
ENGLISH
2.3 System Setup - Connecting Various Equipment (continued)
Apple™ Desktop Mouse - The Macintosh operating system should recognize the MP8755/MP8755L/MP8770/
MP8770L as a mouse without any drivers being loaded.
VirtualMouse for PC Computer - For IBM™ compatible computers, the operating systems will need to
be set to “Serial Mouse,” “PS/2 Mouse,” or “USB Mouse” to recognize the projector as a mouse pointer
device.
Change mouse driver information to “Serial Mouse,” “PS/2 Mouse,” or “USB Mouse.”
a) Windows™ 95/Windows™ 98 - Click “Start;” select “Settings;” select “Control Panel.” Click on
“Mouse;” select the “General” tab; (see what driver is currently loaded and make note of it); select
“Change;” select “Show all devices;” (make note of the current Manufacturer and Model); select
“Standard Mouse Type” for Manufacturer; then select “Standard Serial Mouse,” “Standard PS/2
Mouse,” or “USB Mouse.” Click OK to change and apply the new driver. Restart Windows if
prompted. USB mouse emulation is not supported in all versions of Windows 95.
b) Windows™ 3.1 - From “Program Manager” click “Main;” then click “Windows Setup,” (make note of
what the current mouse driver is). Click “Options;” then “Change Systems Settings.” Choose
“Mouse.” It should be listed as “Microsoft or IBM PS/2.” USB mouse emulation is not supported in
Windows 3.1.
✔ Note
For proper mouse operation, always turn the projector power on first and then power up the computer.
For some laptop computers you may need to disable the internal pointing device (IPD). This is done through
the BIOS level set up of the particular machine, or it could be listed in a “Utilities” program group, i.e., “Toshiba
Utilities™,” or “Thinkpad Features™.”
10
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
ENGLISH
2.4 Remote Control Transmitter Identification
INPUT
LASER
Press the VIDEO or RGB button to select
the input source. Press again to select the
next source.
Press and hold down button to project laser
pointer.
STANDBY/ON
Set main power switch to ON. Press
STANDBY/ON button to begin projection
mode (lamp on) or press and hold button
for 1 second to switch to standby mode
(lamp off).
VIDEO
RGB
LASER
STANDBY/ON
POSITION
POSITION∗
Press button then use DISC PAD to move
image (RGB signal only) up/down or left/
right.
RESET∗/RIGHT MOUSE BUTTON
DISC PAD∗/LEFT MOUSE BUTTON
For menu screens, press DISC PAD to
select menu items. For non-menu screens,
press DISC PAD for mouse shift or left
mouse button function.
RESET
MENU
FREEZE
MAGNIFY
–
VOLUME
PinP
VOLUME∗
BLANK AUTO
MUTE
Press up to increase or down to decrease
speaker volume.
TIMER
MUTE∗
Press button to turn the mute function
(speaker sound) ON/OFF.
MAGNIFY∗
PinP∗
Press the PinP button to display a video
signal as a small picture-in-picture screen
in the corner of an RGB display. Press it
again to enlarge the picture-in-picture
screen size. Press it a third time to exit
the PinP screen and turn the function OFF.
The position of the picture-in-picture
screen can be controlled by pressing the
POSITION button or from the Image menu.
(Both RGB and Video signals must be
present for the picture-in-picture screen to
operate.)
BLANK ON
Press button to turn ON/OFF the screen
blanking function.
FOCUS
Press (+) or (-) to adjust the image
sharpness.
© 3M 2000
Press button to turn ON/OFF the freeze
image function.
OFF
MENU∗
Press the MAGNIFY (+) to enlarge the
center of the display image. Press again
to enlarge image to maximum of 4X
magnification. Press MAGNIFY (-) to
reduce the display image size. Press OFF
to return to normal image size. (Can be
used with the POSITION button to select
the image area being magnified.)
For menu screens, press button to return to
initial settings. For non-menu screens, press
button for right mouse button function.
FREEZE∗
+
Press the remote control button to display
the menu screen.
CAUTION
To prevent injury to eyesight, do not point
laser beam at other persons or look directly
into laser beam.
+
+
FOCUS
ZOOM
–
–
TIMER∗
Press button to turn the menu screen timer
ON/OFF. The timer does not display when
the blank function is active.
ZOOM
Press (+) to increase or (-) to decrease the
size of the displayed image.
AUTO∗
Press the AUTO button to activate the auto
sync function. The message “AUTO IN
PROGRESS” will display for several
seconds as the projector adjusts the V.
POSIT, H.POSIT. H.PHASE, & H. SIZE
settings. The Auto Sync function will not
operate under the following conditions:
• Initial screen message NO INPUT IS
DETECTED or SYNC IS OUT OF
RANGE is displayed.
• Freeze and Magnify functions have not
been turned off prior to pressing AUTO
button.
• Software application running on your
computer is not set to maximum
∗ This button will not function if the
screen size prior to pressing AUTO
message "NO INPUT IS DETECTED" or
button.
"SYNC IS OUT OF RANGE" is displayed.
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
11
Section 3: Basic Operations
ENGLISH
3.1 Projector Startup
— ZOOM +
— FOCUS +
MUTE
INPUT
O I
MENU
STANDBY ON
LAMP POWER TEMP
P
M
LA
P
M
TE
RE
ER
W
PO
NU
T
T
FOC
US
+
MU
PO
RT
AB
LE
SE
INPU
ME
STAN
DB
Y ON
+
RESET
TE
ZO
OM
OJE
CT
OR
MP
877
0
PR
MP
877
0
EPS-130A
Figure 3.1 Projector Controls
1. Make all cable connections and line hookups with the power off.
3. Press the STANDBY/ON button
STANDBY ON
O I
2. Turn on the projector’s MAIN POWER SWITCH
. The POWER indicator will light up orange.
. The POWER indicator blinks (green) and then lights (green).
The POWER indicator will blink green during warm-up and lamp ignition. When power is turned off,
there is a 60 second reset period before the STANDBY/ON button will function again.
4. Adjust the screen size by pressing the ZOOM button. – +
5. Adjust the focus by pressing the focus button. – +
Press any other button to make the focus screen disappear.
6. Turn on all connected equipment. Refer to Section 2.3.
ZOOM
FOCUS
7. Press the INPUT button
INPUT
on the projector or the INPUT SELECT (VIDEO or RGB) button on the
remote to select the source of the signal to be projected on the screen. The selected signal input is
displayed at the bottom right of the screen. The display will show the last selected input source before
power was turned off.
3.2 Projector Shutdown
1. Press and hold the STANDBY/ON button
STANDBY ON
for 1 second. The POWER indicator blinks orange and the lamp turns
2. Turn off the projector’s MAIN POWER SWITCH
O I
off. After approximately 1 minute, the fan stops and the indicator stays orange.
.
Caution
Do not turn off the MAIN POWER SWITCH before pressing the STANDBY/ON button. After the STANDBY/ON button is
pressed, the fan rotates for about 1 minute to cool the projector.
3. Attach lens cap to protect projection lens.
4. Disconnect cables if moving projector to new location.
12
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
Section 4: Adjustments and Functions
ENGLISH
4.1 How To Use Height Adjustment Feet
Adjust the image elevation using the height adjustment feet at the front of the projector.
1.
Raise the front end of the projector so the feet are not touching the tabletop.
2.
Push the lock button to unlock the foot.
3.
Extend or retract each foot to the desired height.
4.
Release the lock button to lock the foot into position.
5.
For fine adjustments, rotate each foot.
Caution
Do not unlock the foot adjusters if the projector is not supported. If the foot adjusters do not lock
completely, turn the foot adjusters slightly before locking.
Front View
MP8770
Side View
RGB IN
1
2
S-VIDEO IN
O I
VIDEO IN
CONTROL
RGB OUT
AUDIO IN
R
MONO
R
AUDIO IN
2
1
AUDIO
OUT
USB
MD05551
MD05401
0-9
O
Figure 4.1 Height Adjustment
© 3M 2000
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
13
ENGLISH
4.2 Plug & Play Function
This projector is VESA DDC 1/2B compatible. Plug & Play is possible by connecting to a computer that is VESA DDC
(Display Data Channel) compatible. Plug & Play is a system configured with peripheral equipment including a computer
and display, and a compatible operating system.
✔ Note
Use the RGB cable included with this projector when using Plug & Play. With other cables, pins (12) - (15) are
sometimes not connected (effective only for RGB1).
4.3 Freeze Function
The Freeze function is used to display (freeze) a single frame of the image being projected.
✔ Note
The FREEZE function will turn off during the operation of the MENU, FOCUS, PinP, VOLUME, MUTE, BLANK,
TIMER, AUTO or POSITION functions.
4.4 Magnify Function
The Magnify function is used to enlarge a portion of the display image. Press the MAGNIFY (+) button to magnify the
center of the displayed image. Press again to magnify to 4x. Press the MAGNIFY (-) button to reduce image size. Press
OFF to return to normal image size. To move the display area being magnified, press the POSITION button, then use the
DISC PAD to move the magnified area up, down, left or right.
✔ Note
To return to normal display, press the MAGNIFY OFF button. The MAGNIFY function will turn off during the
operation of the KEYSTONE or AUTO functions.
4.5 Picture-in-Picture
The PinP button on the remote control is used to display a video signal image in the RGB signal image. Press the PinP
button to display the PinP screen (small size). Press again to increase the screen size (maximum size screen). Press a third
time to exit the function and remove the PinP screen.
[small screen size ➔ maximum screen size ➔ OFF]
Both RGB and Video signals must be present for the Picture-in-Picture function to operate.
1. Select RGB1 or RGB2 input.
2. Start the video input source.
3. Press the PinP button on the remote control to display a small PinP screen in the corner of the projector
image. Press the PinP button again to enlarge the size of the screen display to maximum.
4. Press the POSITION button on the remote control to change the location of the PinP screen. The
position of the Picture-in-Picture screen can also be changed from the Image menu.
5. Press the PinP button a third time to exit the function and remove the PinP screen from the projector
image.
14
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
ENGLISH
4.6 Menu Navigation
MENU
Figure 4.2 Menu Button
1. Press any MENU button on projector or remote control MENU button.
On-screen menus are displayed on the screen.
2. Select the menu to be adjusted using the MENU (
) buttons or DISC PAD.
Selected Menu is highlighted.
3. Select the item to be adjusted using the MENU (
) buttons or DISC PAD.
Highlighted items may be adjusted.
✔ Note
Separate settings are provided for the VIDEO, RGB1 and RGB2 input terminals. Adjustments are saved after
power off.
SETUP
Factory Default Setting:
INPUT
IMAGE
OPT.
VOLUME
To reset a single item from SETUP menu:
BRIGHT
CONTRAST
1. Select the adjustment item (bright, contrast...).
SHARPNESS
COLOR
2. Press the RESET button. Only the selected item resets.
TINT
COLOR BAL R
COLOR BAL B
Figure 4.3 Default Settings
© 3M 2000
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
15
4.7 SETUP
ENGLISH
The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4)
or Video (Figure 4.5) menu according to the input source being projected.
RGB Signal Input
SETUP
INPUT
IMAGE
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL R
COLOR BAL B
Video Signal Input
OPT.
SETUP
INPUT
IMAGE
OPT.
VOLUME
BRIGHT
CONTRAST
121
57
7
800
SHARPNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
Figure 4.4 RGB Signal
Figure 4.5 Video Signal
Adjustment Item
VOLUME
Decrease
BRIGHT
(BRIGHTNESS)
CONTRAST
Increase
Dark
Bright
Lower
Higher
SHARPNESS
Soft
Sharp
COLOR
Less
More
TINT
Red
Green
V.POSIT
(V.POSITION)
Moves the picture up or down.*
H.POSIT
(H.POSITION)
Moves the picture left or right.*
H.PHASE
Decreases the picture flicker.*
H.SIZE
Widens or Narrows the horizontal
size of picture.*
COLOR BAL R
Less red
More red
COLOR BAL B
Less blue
More blue
*Auto Sync Function: Press the AUTO button on the remote control to engage the automatic sync function. The message
“AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT, H.POSIT. H.PHASE, & H.
SIZE settings. Auto Adjust can also be executed using the operation buttons of the main unit. Hold down the RESET button
and press the input switch (INPUT) button.
•
•
•
•
•
16
✔ Note
TINT cannot be adjusted with a PAL, SECAM, N-PAL or M-PAL video signal input.
TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.
V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.
Menu operation is not possible during freeze functions.
Displaying the Setup menu will cancel the magnify and freeze functions.
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
4.8 INPUT
ENGLISH
The INPUT sub-menu is used to select the RGB or video input source. The RGB values are shown in figure 4.6. The
VIDEO values are shown in Figure 4.7.
SETUP
INPUT
RGB
VIDEO
IMAGE
OPT.
fH: 48.3
fV: 60
KHz
Hz
Figure 4.6 Input Menu - RGB
Adjustment
Area
© 3M 2000
SETUP
INPUT
IMAGE
OPT.
RGB
VIDEO
AUTO
NTSC
PAL
SECAM
NTSC4.43
M-PAL
N-PAL
Figure 4.7 Input Menu - Video
Value
RGB
Displays the following RGB inputs:
fH: horizontal sync frequency
fV: vertical sync frequency
Video
Selects the VIDEO signal format Auto,
NTSC, PAL, SECAM,
NTSC 4.43, M-PAL, N-PAL
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
17
4.9 IMAGE
ENGLISH
The IMAGE sub-menu is used to change the image characteristics.
SETUP
INPUT
IMAGE
OPT.
SETUP
KEYSTONE
KEYSTONE
MIRROR
MIRROR
BLANK
BLANK
START UP
START UP
P.IN P.
P.IN P.
SETUP
INPUT
IMAGE
OPT.
KEYSTONE
MIRROR
BLANK
START UP
INPUT
IMAGE
OPT.
WHITE
BLUE
BLACK
BLANK
START UP
P.IN P.
INPUT
IMAGE
OPT.
SETUP
KEYSTONE
MIRROR
MIRROR
BLANK
P.IN P.
OPT.
MIRROR
KEYSTONE
START UP
IMAGE
KEYSTONE
NORMAL
H: INVERT
V: INVERT
H&V: INVERT
P.IN P.
SETUP
SETUP
INPUT
INPUT
IMAGE
OPT.
BLANK
TURN ON
TURN OFF
START UP
P.IN P.
Figure 4.8 Image Adjustment Screens
Adjustment
Screen
18
Value
KEYSTONE
Reduce distortion
at bottom of image.
MIRROR
Inverts the picture horizontally or vertically.
H: INVERT Inverts the picture horizontally.
V: INVERT Inverts the picture vertically.
H&V: INVERT Inverts the picture horizontally and vertically.
BLANK
Selects the blank color.
STARTUP
Enable / disable startup screen
When canceled, the background color will change to blue.
P. IN P.
Change the picture in picture screen display position.
Reduce distortion
at top of image.
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
4.10 OPT.
SETUP
INPUT
IMAGE
ENGLISH
The OPT. sub-menu allows you to control communication function.
OPT.
COM. SPEED
COM. BITS
TIMER
LANGUAGE
AUTO OFF
SYNC ON G
SETUP
INPUT
IMAGE
COM. SPEED
COM. BITS
TIMER
LANGUAGE
SETUP
OPT.
SETUP
LANGUAGE
AUTO OFF
SYNC ON G
SYNC ON G
IMAGE
OPT.
OPT.
7N1
8N1
TIMER
AUTO OFF
INPUT
IMAGE
COM. BITS
SETUP
INPUT
COM. SPEED
COM. SPEED
COM. BITS
COM. BITS
TIMER
IMAGE
OPT.
TIMER
10 min.
LANGUAGE
SETUP
INPUT
COM. SPEED
1200
2400
4800
9600
19200
LANGUAGE
AUTO OFF
AUTO OFF
SYNC ON G
SYNC ON G
INPUT
IMAGE
OPT.
SETUP
INPUT
COM. SPEED
COM. SPEED
COM. BITS
COM. BITS
TIMER
TIMER
LANGUAGE
LANGUAGE
AUTO OFF
SYNC ON G
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
NORSK
NEDERLANDS
JAPANESE
IMAGE
OPT.
AUTO OFF
0 min.
SYNC ON G
TURN ON
TURN OFF
EPS-137A
Figure 4.9 OPT Adjustment Screens
Adjustment
Screen
Value
Default
COM. SPEED
Selects the data speed of transmission.
1200
COM. BITS
Selects the data format of transmission.
7N1... 7 data-bits, No parity, 1 stop bit.
8N1... 8 data-bits, No parity, 1 stop bit.
7N1
TIMER
Sets the timer ( 0-99 minutes).
—
LANGUAGE
Selects the language on-screen menu. (English, French, German,
Spanish, Italian, Norwegian, Netherlands, Japanese)
—
AUTO OFF
Selects how long projector will stay on in minutes, if no input is detected.
Select 0 to disable this function.
—
SYNC ON G
Sets the SYNC on G function to ON/OFF (supports older monitors).
© 3M 2000
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
19
5.1 Cleaning the Air Filter
✔ Note
Clean the air filter about every 50 hours. If air is restricted due to dust accumulation on filter, the projector may
shut down due to overheating.
1.
Turn off the MAIN POWER SWITCH of the projector and disconnect power cord (1). Let cool for 20
minutes.
2.
Push tab (2) and remove the air filter cover (3) from the front of the projector.
3.
Lift retainer wire (4) and carefully remove foam air filter (5).
4.
Vacuum (6) dust and dirt from filter.
5.
Re-install air filter and replace air filter door.
1
P
M
E
T
T
P
M
A
L
SE
R
E
W
O
P
INP
ME
MU
UT
FOC
US
TE
ZO
OM
P
O
R
TA
B
LE
0
77 R
P8 JECTO
M PRO
NU
+
STA
ND
BY
ON
+
Power
RE
ENGLISH
Section 5: Maintenance
3
MP
877
0
4
6
2
5
EPS-132A
Figure 5.1 Remove Air Filter
20
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
Section 6: Lamp
ENGLISH
6.1 Lamp
The following symptoms may indicate a lamp in need of replacement:
•
•
LAMP indicator lights up red.
“CHANGE THE LAMP” message appears on the screen.
✔ Note
This lamp contains mercury. Consult your local hazardous waste regulations and dispose of this lamp in a
proper manner.
6.2 Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1.
While the projector is running, press and hold the TIMER button on the remote control for 3 seconds.
2.
The operating time of the lamp will be displayed. The message “CHANGE THE LAMP, AFTER
REPLACING LAMP RESET THE LAMP TIMER” will appear after the lamp operating hours have reached
the end of the normal lamp life. The message “POWER WILL TURN OFF AFTER 20 HOURS” will appear
when 20 or less lamp hours remain. The number of hours left until shut down will decrease until 0 hour is
reached, then power will be turned off.
✔ Note
After normal lamp operating time has expired, the projector will only run for 10 minute intervals when restarted
until the lamp is replaced and the lamp timer is reset. The message “CHANGE THE LAMP” will blink at
projector start up to remind you to change the lamp.
6.3 Reset Lamp Hours
© 3M 2000
1.
To display the total lamp hours, press and hold for 3 seconds, the RESET button on the projector or Timer
button on the remote control.
2.
To reset the lamp timer, press the RESET button on the projector or MENU button on the remote while the
total lamp hours are displayed. Use the arrow button on the projector or the DISC PAD to select 0 (or
CANCEL).
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
21
6.4 Replacing the Lamp
ENGLISH
WARNING
To reduce the risk of electrical shock, always turn off projector and disconnect power cord before changing
lamp.
Caution
To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the
lamp.
To reduce the risk of cuts to fingers and damage to internal components, use caution when removing lamp
glass that has failed and shattered into sharp pieces.
✔ Note
For maximum lamp life, do not apply shock, handle or scratch the lamp glass when it is hot. Also, do not use an
old or previously used lamp as a replacement lamp.
1. Remove lamp access door: The lamp access door is located on the bottom of the machine. Use a screwdriver to
unscrew the cover retaining screw (1) and gently remove the cover (2) and set it aside.
2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (3)
✔ Note
All lamp module screws must be loosened. These screws are self-containing screws that cannot be removed
from the lamp module or access door.
3. Remove lamp module: Carefully slide the lamp module out (4) using steady pressure.
Caution
To reduce the risk of cuts to fingers from sharp metal fittings and/or decreasing image quality by touching the
lens, do not insert hand into the empty lamp compartment when the lamp has been removed.
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated. Tighten the
lamp module retaining screws (3) to secure the lamp module in place.
Insert the hinge tabs on the bottom of the lamp access door, then close and tighten the retaining screw
(1) to secure the door.
✔ Note
Reset the lamp operation hours. See Section 6.3 for details.
1
2
4
3
3
EPS-98A
Figure 6.1 Lamp Module
22
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
Section 7: Troubleshooting
Symptom
Cause
ENGLISH
7.1 Symptom/Solution Table
Solution
Power cannot be turned
on.
• The main power is not turned on.
• The power cord is disconnected.
• 60 seconds have not elapsed since
the power was turned off.
• Turn on the MAIN POWER SWITCH.
• Insert the power cord into an AC socket.
• Wait 60 seconds before turning on power.
No picture and sound.
• The setting of the input source is
not correct.
• RGB/Video/Audio wiring to
projector is not correct.
• Set the correct input using the input select button of
the projector or the remote control.
• Connect the cable to correct input/output source.
Sound is heard with no
picture.
• RGB/Video/Audio wiring to
projector is not correct.
• The brightness is set fully to dark.
• Lens cap is on.
• Connect the cable to correct input/output source.
• Audio wiring to projector is not
correct.
• The volume is set to minimum.
• The unit is muted.
• PinP is on and audio is switched to
VIDEO mode.
• Connect the cable to correct input/output source.
Color is weak and tint is
incorrect.
• The color and tint have been
adjusted incorrectly.
• Adjust the color and tint correctly.
Picture is dark.
• The brightness and contrast has
not been adjusted correctly.
• The lamp needs to be replaced.
• Adjust the brightness and contrast correctly.
Picture is not clear.
• Projector is out of focus.
• Adjust the focus and H PHASE.
LAMP indicator lights
red.
• Lamp will not ignite.
• Turn off power and let cool for 20 minutes, then
restart.
• If problem persists call your dealer.
• Temperature inside projector is too
hot.
• Clear blocked ventilation holes.
• Clean air filter.
• Lamp access door on bottom of
case is open.
• Ensure lamp access door is closed.
• The lamp operating hours have
reached maximum operating hours.
• Replace the lamp.
• Cooling fan not operating.
• Contact your dealer.
Picture is displayed with
no sound.
LAMP indicator blinks
red.
TEMP indicator blinks
red.
© 3M 2000
• Press the MENU button and increase BRIGHTNESS.
• Remove lens cap.
• Press the VOL button to increase Volume.
• Press the MUTE button.
• Press VOLUME and move DISC PAD to switch to
audio input.
• Replace the lamp with a new one.
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
23
ENGLISH
7.2 Message/Solution Table
Error Message
Displays
Cause
Solution
NO INPUT IS
DETECTED.
The projector is not detecting a signal.
Check cable connections to input device. Input device
not connected to this input mode, switch to next mode.
SYNC is out of Range.
The horizontal frequency of input signal
exceeds projector capability.
Switch projector to correct resolution.
See Appendix A.5
Nearing end of normal lamp operation
CHANGE THE LAMP.
CALL A MAINTENANCE time.
PERSON.
CHANGE THE LAMP.
CALL A MAINTENANCE
PERSON.
THE POWER WILL
TURN OFF AFTER *hr.
Remaining lamp operation time = 20
hours or less.
CHANGE THE LAMP.
(Blinking message)
Normal lamp operating time has
expired. Safety feature shuts projector
down after 10 minutes.
24
Change the projector lamp and reset the lamp
operation hours to zero.
Change the projection lamp and reset the lamp
operation hours to zero.
*Indicates number of hours until power
turns off automatically.
Change the projector lamp and reset the lamp
operation hours to zero.
3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
Section 8: Accessories
ENGLISH
8.1 Service Information
For product information, product assistance, service information, or to order accessories, please call:
In U.S. or Canada: 1-800-328-1371
In other locations, contact your local 3M Sales office.
Accessories
Part Number
Ultra-high performance lamp module, 190 W . . . . . . . . . . . . . . . . . . . . .
Power cord (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cord (UK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cord (Eu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VGA cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S-video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-conductor video/audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS/2 mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADB mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stereo mini jack cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Not Included with Basic Packet
Ceiling mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustable height suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shipping case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Soft carry case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RS-232 control cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document Camera - 120 VAC 60 Hz (optional) . . . . . . . . . . . . . . . . . . .
Document Camera - 220 VAC 50 Hz (optional) . . . . . . . . . . . . . . . . . . .
78-6969-8919-9
DY-0205-1356-9
DY-0205-1355-1
DY-0205-1354-4
78-8118-3401-5
78-8118-3308-2
78-8118-3238-1
78-8118-3234-0
78-8118-8107-3
78-8118-8105-7
78-8118-8016-5
78-8118-8104-0
78-8118-8246-9
Part Number
78-6969-8748-2
78-6969-8312-7
78-6969-8584-1
78-6969-8585-8
78-8118-3312-4
78-8118-8186-7
78-6969-8578-3
78-6969-8724-3
How to Order
Please order these parts through your dealer, or contact 3M Customer Service at the following number:
In U.S. or Canada: 1-800-328-1371
In other locations, contact your 3M Sales office.
---------------------------------------------------------------------------------------------------------------------------------------The contents of this manual are subject to revision without prior notice.
3M assumes no responsibility for the infringement of special rights of a third party or other rights that may arise out of the
information contained in this manual.
Reproduction of this manual in any form without prior permission is strictly prohibited.
3M will replace the manual if any pages are missing or collated incorrectly.
© 3M 2000
3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
25
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy
or completeness is not guaranteed Before using this product, you must evaluate it and determine if it is suitable for your intended application. You
assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall have no force or effect unless expressly set forth in a written agreement signed by an
authorized officer of 3M.
Warranty and Limited Remedy. This product will be free from defects in material and manufacture for a period of two years from the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Limitation of Liability. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether
direct, indirect, special, incidental or consequential regardless of the legal theory asserted.
Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we're the only
transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call
us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.
3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-9000
QR46271
3M Canada
P.O. Box 5757
London, Ontario
N6A 4T1
3M Mexico, S.A. de C.V.
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico
3M Europe
Boulevard de l'Oise
95006 Cerge Pontoise Cedex
France
Printed on 50% recycled wastepaper,
including 10% post-consumer
Litho in USA
© 3M 2000
78-6970-9041-9 Rev. B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement