Abocom FM560C User's Manual

Abocom FM560C User's Manual
PCMCIA
Fax Modem 56K
Quick Installation Guide
M73-APO02-390
REGULATORY STATEMENTS
FCC Part 68 Registration
The high speed PC card FAX/MODEM is registered with the FCC as compliant with
the rules of Part 68, and use of this modem is subject to the following restrictions:
1. The Federal Communication Commission FCC has established rules which permit
this device to be directly connected to the telephone network. Standardized jacks
are used for these connections. This equipment should not be used on party lines
or coin phones.
2. If this device is malfunctioning, it may also be causing harm to he telephone
network; this device should be disconnected until the source of the problem can
be determined and until repair has been made. If this is not done, the telephone
company may temporarily disconnect service.
3. The telephone company may make changes in it’s facilities, equipment, operation
and procedures; if such changes affect the compatibility or use of this device, the
telephone company is required to give adequate notice of the with the FCC.
4. If the telephone company requests information on what equipment is connected to
their lines, inform them of:
a. The telephone number which this unit is connected to
b. The ringer equivalence number.
c. The USOC jack required.
d. The FCC Registration number.
Items (b) and (d) are indicated on the label. The Ringer Equivalence Number (REN)
is used to determine how many devices can be connected to your telephone line. In
most areas, the sum of the REN’s of all the devices on any one line should not exceed
5.0. If too many devices are attached, they may not ring properly.
FCC Part 15 Registration
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the distance between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult an experienced radio/TV technician for help.
CTR 21 pan-European Certification
This equipment has been approved in accordance with Council Decision 98/482/EC
for pan-European single terminal connection to the public switched telephone
network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an unconditional
assurance of successful operation on every PSTN network termination point. In the
event of problems, you should contact your equipment supplier in the first instance.
This device is designed to work with the notified networks in all EC member states.
Nevertheless, some of the network services in invidual countries might not be
supported, but they will not affect the normal data and fax applications. For example,
the metering charge service in Germany. Besides you may encounter difficulty of
using PULSE dialing function in some of the countries, such as Nordic countries.
This kind of network compatibility is dependent on the physical and software settings
of this device. If the users are desired to use this device on those networks, they
should contact the vendor or supplier first.
HARDWARE INSTALLATION
1.
2.
Locate the PCMCIA slot of your system.
Align the PCMCIA FAX MODEM 56K PC
Card toward the PCMCIA slot. Push evenly
and steadily until it is seated.
Notebook
Connects to RJ-11 phone jack
3.
4.
Connect the other end of the PC Card cable
to the telephone line outlet.
You are now ready to continue the software
installation.
CAUTION
To reduce the risk of fire, use only No. 26
AWG or larger telecommunication line cord.
For Windows NT does not support
“Hot Insert/Remove”, be sure to
complete the hardware installation as
described above before you start
Windows
NT
and
software
installation.
-1-
SOFTWARE INSTALLATION
Installation for Windows 98
1.
2.
3.
4.
5.
6.
7.
8.
As soon as the PCMCIA Fax Modem 56K
PC is inserted into the PCMCIA slot,
Windows automatically detects the new
hardware device and the following message
will be prompted.
Insert the device driver compact disc into
your CD-ROM drive. Click Next.
Select Specify a location when the
following figure appears. Enter the CDROM drive letter followed by driver\win98.
Click Next. Or you may click the Browse
button to select the driver\win98 folder in
your CD-ROM drive.
When the following figure appears, click
Finish. The Installation program will
continue.
Click Next to continue.
Select Search for the best driver… and
click Next.
Follow the on-screen instruction to proceed.
Click Next to continue.
-2-
9.
The installation program will proceed
automatically. Click Finish to complete the
installation.
Installation for Windows 2000
If you want to use the Microsoft built-in driver,
make sure to execute d:\Driver\Win2000\
PAR.exe. Or perform the following procedures
to update the latest driver.
1. Once the PCMCIA Fax Modem 56K PC
Card is plugged into your PCMCIA slot,
Windows will prompt you a standard
PCMCIA Card Modem has been installed
and ask you if you want to restart your
computer. Select No.
2. Double-click the small icon at the right
bottom on your screen as illustrated below. If
the icon does not appear at all, go to My
ComputerÆ
Control
PanelÆ
SystemÆHardwareÆ device Manager.
Select Modems and skip to Step 4.
3. Click Properties.
-3-
4. Select the Driver tab. Click the Update
Driver…button.
5. Click Next to continue.
6. Select Display a list of the known drivers
for this device so that I can choose a
-4-
specific driver as illustrated below. And
click Next.
7. Click Have Disk when the following dialog
box appears.
8. Load the CD that contains the device driver
into your CD drive. Click Browse and direct
the proper file location with the disk drive
followed by Driver\Win2000\LTW2KG.
-5-
9. Select LTW2KG, and click Open. Follow
the on-screen instructions to proceed.
10. When the following figure appears, click
Next.
11. When Windows prompt you an Update
Driver Warning message. Select Yes.
-6-
12. Click Next to continue.
13. Click Yes to continue at the Digital
Signature Not Found screen.
14. Click finish to complete the installation.
-7-
15. Remember to restart your computer to
activate this new device.
Installation for Windows Millennium
If you want to use the Microsoft built-in driver,
make
sure
to
execute
d:\Driver\WinME\PAR.exe. Or perform the
following procedures to update the latest driver.
1. Once the PCMCIA Fax Modem 56K PC
Card is plugged into the PCMCIA slot of
your system, Windows will automatically
detect the Lucent Win Modem.
2. To update WDM Communication Device
driver,
right-click
My
ComputerÆPropertiesÆDevice Manager.
3. Click WDM Modem Enumerator to
expand.
-8-
4.
5.
6.
7.
Load the device driver into the CD-ROM
drive
of
your
system.
Click
PropertiesÆDriverÆ Update Driver.
Select Specify the location of the driver
(Advanced) and click Next.
Select Display a list of all the drivers…and
click Next.
Click the Have Disk…button.
Click
Browse to select the CD-ROM drive where
you put the device driver. (for example: D:\)
Enter the CD-ROM driver letter followed by
Driver\WinME.
-9-
8.
Click Next.
9.
Click Next to proceed.
10. Click OK to finish the installation.
11. Go back to step 2. Click Modem to expand.
12. Load the device driver into the CD-ROM
drive of your system. Click PropertiesÆ
Driver ÆUpdate Driver.
13. Select Specify the location of the driver
(Advanced) and click Next.
14. Select Display a list of all the drivers…and
click Next.
15. Click the Have Disk…button.
Click
Browse to select the CD-ROM drive where
you put the device driver. (for example: D:\)
Enter the CD-ROM driver letter followed by
Driver\WinME.
16. Click Next.
17. Click Next to proceed.
18. Click Finish to complete the installation.
19. To verify if the PCMCIA Fax Modem 56K
exists in your system, go to Device
Manager. PCMCIA Fax Modem 56K and
PCMCIA Fax Modem 56K WDM
Modem Enumerator should be found. If
not, contact your dealer for technical
support.
- 10 -
Installation for Windows XP
1. Once the device is well inserted into your
PCMCIA slot, windows will prompt you the
following message. Insert the device driver
CD (or diskette). Select install the hardware
automatically … and click next.
2. Select the device you inserted and click next.
3. Click Continue Anyway. Then windows will
start to copy the appropriate driver into your
system.
4. Click finish to complete the software
installation.
- 11 -
5. To verify if the device exists in your system,
go to Start Æ Control Panel ÆSystem
ÆHardware ÆDevice Manager. Check if
the device is listed. If not, contact your dealer
for technical support.
Installation for Windows NT
1.
2.
3.
4.
5.
6.
Before you start Windows NT, make sure
the PCMCIA Fax Modem 56K PC Card has
been properly inserted into the free
PCMCIA slot of your computer.
Load the device driver compact disk in the
CD-ROM drive.
Start Windows NT.
Go to My Computer.
Click the CD-ROM drive. Click the
driver\winnt folder. Or you may click the
Browse button to select the CD-ROM drive
and the driver\winnt folder.
Double-click setup.exe. The installation
program will proceed automatically.
Note: If Softex or Card Wizard was already
installed in your system, Windows will appear
message for PC Card malfunctioning. Ignore
this message and install the WinNT driver.
Remember to reboot after the installation.
- 12 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement