Abocom UFE1000B User's Manual
UFE1000B
USB to
10/100M Fast Ethernet
Adapter
Now you can experience a true plug-and-play Network
device easier than ever. The USB (Universal Serial Bus)
Network Adapter allows you to connect any 10Mbps,
100Mbps or 10Mbps/100Mbps network from a
USB-enabled PC, notebook, or USB HUB. With instant
hardware recognition from Windows 98 and "Hot Swap"
feature from USB specification, you don't need to be a
MIS specialist to operate it. Just simply hook up the
USB cable at one end and plug a standard twist pair
(RJ-45) network cable in the other end, and you will be
networked within no time!
Key Features
10M or 100M data rate auto-negotiation
Feature full duplex mode that doubles the network
connection speed
High-power Bus-power no outside power is required
Easy to read LED indicators
Compact and robust design perfect solution for all
network users, both desktop and mobile
Compatible with Windows 98/2000/ME/XP
Microsoft Plug-and-Play compatible
Easy installation
Network Specification
IEEE 802.3 10BaseT and 802.3u 100BaseTX
Cat 3 / Cat 5 UTP, 100ohm STP cable up to 328ft/100M
Host Interface
High-power Bus-powered from USB HOST or
HUB, no external power needed
Full speed signal up to 12Mb/s ,upstream B type
USB port
Suspend power saving mode supported
Data Speed
10/100 Mbps for Ethernet data transfer
LED Indicator
Link status 10/100 Mbps Orange / Green
Activity (TX/RX) - Green
Driver Support
Windwos 98
Windows 2000
Windows ME
Windows XP
Windows CE 3.0
Linux
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement