framed series - Preference Audio
K-5LCR K-802 K-602 framed series Every Preference model loudspeaker is "timbre-matched" ensuring sonic uniformity throughout the line. This means all models have been carefully engineered to have a family sound; this is also referred to as "voice matching". Certain fine loudspeakers in the audio industry become benchmarks of sound quality or reference standards by which authoritative industry experts judge all others. K-5LCR K-802 K-602 Dual 5-1/4" 8" 6-1/2" Woofer Size 1" 1" 1" Tweeter Size Frequency Response 45 - 21K 35 - 21K 42 - 21K Power Handling FEATURES Wooven Kevlar® woofer with butyl rubber surround Tetoron® soft dome pivoting tweeters Center / All Channel - LCRS Phase plug pole piece extensions & IR Knockouts High-grade crossovers High temperature Polyimide voice coils & Magnetically Shielded AIB ribbed baffle design Industry Leading Superior Clamp-ring Mounting System Baffle Mounted MF & HF EQ switches SPECIFICATIONS Hz ± 3 dB 50 / 100 60 / 120 30 / 60 watts nom. / max. Sensitivity 90 91 90 dB 1 watt / 1 meter Impedance 8 8 8 individually pairs pairs Sold and shipped in Pairs or Individually Overall Dimensions Cut-Out Dimensions Loudspeaker Depth View the entire Preference Product Line: ohms nominal 9"x 15-3/4" 10-1/2" x 14-1/2" 9-1/16" x 12 -3/4" WxH 7-7/8" x 14-7/16" 9" x 13" 8" x 11-3/4" WxH 3-1/2" 3-1/4" 3-1/4" D Tetoron Tweeter KEVLAR® and TETORONTM DRIVER TECHNOLOGY Kevlar woofers and Tetoron tweeters help give Preference loudspeakers a lush musical sound that is rich and powerful. Extremely durable and strong, Preference speakers come with a Limited Lifetime Warranty and withstand the test of time. Kevlar Woofer FAR-FORWARD DESIGN Preference loudspeakers are designed to have the woofer mounted as close to the grille as possible, helping the woofer & tweeter avoid being “swallowed up” by the baffle mounting, and creating more open and airy sound for every seating location. FRONT-MOUNTED DRIVERS Preference woofers are mounted from the front on ALL our round models, reducing the footprint by more than 1 inch, and yielding one of the smallest footprints in the industry. Less real estate on the ceiling or wall means less obtrusive installations. 1 ANTI-VIBRATION MOTOR BOOT Preference speakers are capable of a great deal of energy output in the lower frequency ranges. The custom-tooled motor boot on the woofer’s magnet assembly helps damp extraneous energy and enables the Preference line to play loud, clean, and clear. 2 MULTI-ORDER CROSSOVER DESIGN Preference speakers’ multi-order crossover networks seamlessly blend the drivers and optimize off-axis performance. Customers don’t stand under the ceiling speaker and listen to music, but constantly move around. Preference speakers reproduce music accurately over the widest area, creating great sound throughout the home. 3 POLYPROPYLENE CAPACITORS in the PREFERENCE CROSSOVERS Preference speaker crossovers use polypropylene capacitors in all critical signal areas for the best musical performance. Large electrolytic capacitors are used for long life only where polypropylene is impractical. 1 4 2 6 5 3 4 GOLD-PLATED CONNECTORS with HIGH-FORCE SPRINGS Preference speakers have gold-plated connectors with high-force springs exerting constant pressure for solid, durable connections that get tighter over time with even the largest gauge wire. 5 LARGE GAUGE WIRE And speaking of wire, Preference speakers are built with beefy, 14 gauge wire connections to reproduce as much musical detail as possible throughout the frequency range. 6 FR-4 FIBERGLASS PC BOARDS Preference speakers are built with durable, high-quality FR-4 fiberglass PC boards for the crossover platform to solidly support the crossover components and input terminals. HIGH-ACCURACY FREQUENCY CONTOUR SWITCHES All Preference speakers (except Single-Point) come with tweeter and mid-range switches to fine-tune high and mid frequency performance. Installers can easily adjust each speaker to the room characteristics. CONSTANT COLOR BACKGROUND Preference speakers are designed with “constant color background” and avoid flashy cones, glitzy tweeters & bling, producing a smooth consistent background that gives the grille a uniform look. EASY PAINTING The perforated grilles are easy to paint with ordinary fast-dry spray paint. For a custom finish, color and sheen matched spray paints are available through Preference Audio and My Perfect Color®.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project