Acer | AL1932 | User's Manual | Acer AL1932 User's Manual

Table of Contents
Precautions .....................................................................................................................2
Package contents ............................................................................................................3
Installation instructions.................................................................................................3
Assembling the Monitor.....................................................................................................................3
Repackage the Monitor ......................................................................................................................4
Adjusting the Viewing Angle.............................................................................................................4
Connecting the Devices......................................................................................................................5
Switching the Power ..........................................................................................................................5
Adjusting display settings..............................................................................................6
External Controls ...............................................................................................................................6
OSD options ....................................................................................................................7
OSD Menu .........................................................................................................................................7
Troubleshooting .............................................................................................................9
General specifications ..................................................................................................10
Recycling Information
Any question about recycling monitors, please contact Acer agents.
For more information about Acer, please visit
http://www.acer.com
1
Precautions
The monitor may be damaged if placed too near a source of heat. Be aware of the
location of radiators, cookers, open fires etc.
Do not cover the slots and openings on the back or top of the cabinet as the
monitor requires ventilation. The monitor should be located in a well-ventilated
room to prevent the possibility of overheating.
Do not allow sharp objects such as knives, pens, or pencils near the screen. If such
objects touch the screen, the LCD panel will be permanently scratched.
When cleaning this monitor, disconnect it from the electric socket to avoid any
danger of electrocution. A soft, lint-free cloth should be used to clean the
outside of the monitor. A cloth very slightly moistened with a mild detergent
solution will clean stubborn stains. Keep liquids away from the display screen,
including sprays. Do not spray liquid directly - it is best to lightly spray on to a
cloth and wipe. If liquid gets inside the monitor it can cause electrical shock
and/or damage to the unit.
If you encounter a problem, please check the "Troubleshooting" section first. If
this does not resolve the problem do not attempt to repair the monitor by yourself;
opening or removing covers can lead to injury or death through electrocution
among other hazards. Please contact a qualified engineer if you find the
troubleshooting section does not help.
SPECIAL NOTES ON LCD MONITOR
The following symptoms are normal with LCD monitor and do not indicate a problem.
NOTES
Due to the nature of the fluorescent light, the screen may flicker during initial use.
Turn off the Power Switch and then turn it on again to make sure the flicker
disappears.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes
of 0.01% or less such as a missing pixel or a pixel lit all of the time.
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing the image or turning off the
Power Switch for hours.
2
Package contents
LCD Monitor
AC/DC Adapter
Power Cord
Audio Cable
User Manual (CD)
Quick Start Guide
VGA Cable
Installation instructions
Assembling the Monitor
1. Put the base of monitor on the desk
2. Put the monitor on flat table or plate.
carefully.
3
Repackage the Monitor
Save the original box and packing material in case you have to ship or transport the monitor.
Repackage the monitor:
1.
Unplug the power cord to make sure the power is off.
2.
Put the monitor into carton carefully.
Important
To find a clean and flat surface table place the monitor .
To select clean and dry clothes put under the monitor for avoiding scratches.
Adjusting the Viewing Angle
The viewing angle of the monitor ranges from -5°~35°.
4
Connecting the Devices
Caution: Make sure that the computer and the monitor are both disconnected from the
power supply.
AC/DC Adapter
With power cord
VGA Cable
Audio Cable
Connect the plug of the AC/DC adapter to the (DC IN ) socket of the
monitor , then be insert the power cord into the adapter and a properly
grounded electric socket.
Connect the signal cable to the VGA input socket (VGA IN) of the
monitor , and connect the signal cable to the VGA output socket of the
graphics card on the computer. Then tighten the thumbscrews on the
connector.
Connect the audio input socket (AUDIO IN) of the LCD monitor and
the computer by means of the audio cable.
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure
the shape of the plug matches the shape of the socket it is inserted into, and
that none of the pins are bent or otherwise damaged.
Switching the Power
First, switch the power on to the monitor, then switch the power on to the computer. When you
see the LED on the power button go blue, this indicates the computer is ready for use. Allow
about 10 seconds for the video signal to appear. If you do not see the blue light LED on the power
button or a video signal, check the connections.
5
Adjusting display settings
External Controls
Power on/off
Blue: power on
Orange: in sleep mode
1
○
POWER
2
○
OSD
Function
3
○
UP/ PLUS
If OSD is active, press to select or adjust OSD options. If OSD is
inactive, press once, then press the buttons marked
or
to
adjust the volume.
4
○
DOWN /
MINUS
If OSD is active, press to select or adjust OSD options. If OSD is
inactive, press once, then press the buttons marked
or
to
adjust the volume.
5
○
AUTO
Press to view OSD.
If OSD is active, press to exit a selection in OSD.
If OSD is active, press to enter a selection in OSD. If OSD is
inactive, press and the monitor will automatically optimize the
position, focus and clock of your display.
6
OSD options
Please refer to "External Controls" on Page 6.
To adjust the OSD settings:
1. Press the MENU button to open the OSD main menu.
2. Use the buttons marked
or
, to select the menu option you want.
3. Press AUTO button to highlight a control, and then press
or
to adjust the option
setting.
4.
Press the MENU button to return to the previous menu option or exit the OSD.
OSD Menu
Picture
Brightness:
This adjusts the brightness of the picture on the screen.
Contrast:
This adjusts dark and light shades of color relative to each other
to achieve a comfortable contrast.
Color Temp. :
There are three ways of adjusting color:
Warm (Reddish white)
Cool (Bluish white)
User : You can adjust the colors red, green and blue to the
intensity you desire.
Focus:
This removes any horizontal distortion and makes the picture
clear and sharp.
Clock:
If there are any vertical stripes seen on the background of the
screen this renders them less noticeable by minimizing their size.
It also changes the size of the horizontal screen.
H-Position:
This adjusts the horizontal screen position.
V-Position:
This adjusts the vertical screen position.
7
Audio
Volume: Adjusts the volume.
Mute : on /off
Options
Auto Config. :
System runs auto-configuration.
Reset:
Recall to default settings.
Information:
This shows brief information on the screen.
Settings
Language:
Select the OSD menu language from
English, French, German, Italian, Spanish, Simplified Chinese,
Traditional Chinese, Japanese and Russian.
OSD H. Position
OSD V. Position
OSD Time-out
This changes the position of the OSD window on the screen and
staying time.
8
Troubleshooting
Problems
Possible Solutions
Power LED is not
ON
•
•
Check to see if the power switch is in the ON position.
Ensure that the Power Cord is connected.
No Picture
•
•
•
Check to see if the power switch is in the ON position.
Ensure that the Power Cord is connected.
Ensure the video cable is securely connected to the back of the monitor
and the computer.
Move the mouse or press any key on the keyboard to bring the monitor
out of "active off" mode.
•
Picture shows
inappropriate colors
•
Picture bounces or a •
wave pattern is
•
present in the
picture
Image is not sized
or centered properly
•
•
See "Color Adjustment" to adjust RGB color or to select color
temperature.
Move or switch off electrical devices that may be causing interference.
Inspect the monitor's video cable and ensure that none of the pins are
bent.
Press Auto key and the monitor will automatically optimize the position
of your display.
See "Position adjustment".
Caution: Do not attempt to service the monitor yourself or open the computer yourself.
Please refer all servicing to qualified service personnel if the problems cannot
be solved in "Troubleshooting" section.
9
General specifications
Item
LCD Panel
Display
Max resolution
Pixel Pitch
Color
Brightness
Contrast Ratio
Response Time
View Angle of Horizontal
View Angle of Vertical
External Controls
Power Button
Control Buttons
OSD Function
Picture
Audio
Options
Settings
Video Interface
Video
Sync
Audio
Plug & Play
Power
Power Source
Power consumption during
normal operation
Power consumption during
active off operation
Dimension and Weight
Dimension (W×H×D)
Weight (Net/ Gross)
Specification
19-inch Flat panel active-matrix TFT LCD
SXGA 1280×1024 pixels
0.294 mm
16.2M
400 cd/m² (Typical)
500:1 (Typical)
12ms (Typical)
70° / 70°
75° / 65°
ON/ OFF
MENU /
/
/ AUTO
Contrast / Brightness /Color Temp. /Focus / Clock / H-Position /
V-Position
Volume /Mute
Auto config. / Information / Reset
Language / OSD H-Position / OSD V-Position / OSD time-out
Analog 0.7V
TTL (+/ -)
2W x 2
DDC2B
100~240V AC, 50/60 Hz
50W, approx.
< 2W
455.8X458.5X190.6 mm (with stand)
7.1 / 10.2 kg
10
Download PDF

advertising