Acer | AL2216W | User's Manual | Acer AL2216W User's Manual

Table of Contents
………………………………………………………………
1
Electrical safety
………………………………………………………………
1
Installation safety
………………………………………………………………
1
Cleaning safety
………………………………………………………………
1
Special notes on LCD
monitors
Package contents
………………………………………………………………
2
………………………………………………………………
2
Installation
instructions
Placement
………………………………………………………………
3
………………………………………………………………
3
Installation
………………………………………………………………
3
External controls
………………………………………………………………
4
Image adjustment
………………………………………………………………
5
Screen adjustment
………………………………………………………………
7
………………………………………………………………
8
Plug and play
………………………………………………………………
8
Power saver
………………………………………………………………
8
Troubleshooting
………………………………………………………………
8
Technical
specifications
Display modes
………………………………………………………………
9
………………………………………………………………
10
Safety
Attachments
Safety
Electrical
safety
Note: To ensure your safety and prolong the life of the product, read
the following safety recommendations carefully before using the product
for the first time.
y
Do not touch the inside of the monitor. Only authorized and qualified
technicians should open the LCD monitor case.
y
Hold the plug (not the power cable) when you connect the plug to
the socket. Make sure your hands are dry.
y
This product should only be operated with the type of power indicated
on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
y
This product is equipped with a 3-prong plug, (a plug having a third
grounding pin). This plug will only fit into a grounded power outlet.
If you are unable to insert the grounded plug into the outlet, contact
your electrician to replace your obsolete outlet. Do not use a
two-prong adapter instead of the grounded plug.
y
Don’t expose your LCD monitor to water, or any environment with
a high temperature or humidity, such as kitchens or swimming pools.
Flower vases filled with water are also dangerous.
y
If your LCD monitor operates abnormally (i.e., releases smoke, noise
or a smell), remove the plug immediately and contact your authorized
dealer or service center.
y
Don't touch your LCD monitor with your fingers or any hard object.
Avoid scratching or leaving any oil sludge on the surface of the
display.
y
Protect your LCD monitor by installing it in a place that is
well-ventilated, moisture proof, and dust-free.
y
Don’t install your LCD monitor near a heat source, (i.e., ovens,
space heaters, fire places, furnaces or in the sun).
y
To avoid electric shock, or dropping, install your LCD monitor in
a place where children will not touch it. Secure your LCD monitor
firmly and explain the safety rules to children, if required.
y
When installing your LCD monitor or adjusting its angle, attention
should be paid to the loading capability and leveling of the
structure supporting the LCD monitor.
Cleaning safety y
y
Don’t spray cleanser or water onto your LCD monitor or its case.
Installation
safety
y
When cleaning your LCD monitor, make sure that no liquid permeates
into the inside of the LCD monitor or any accessory.
Moisten a clean, soft, lint-free cloth with water or glass cleaner
without alcohol. Squeeze it so it's just a little damp and wipe
the surface of your LCD monitor gently. It is recommended to use
a silk cloth that is exclusively used to clean the display.
1
Special notes on LCD monitors
The following symptoms are normal for LCD monitors and do not indicate a problem with
the device:
y
Due to the nature of the fluorescent light, the screen may flicker during initial
use. Turn off the power switch and then turn it on again to make the flicker disappear.
y
You may find slightly uneven brightness on the screen depending on the desktop pattern
you use.
y
The LCD screen has effective pixels of 99.99% or more. It may include blemishes
of 0.01% or less (caused by a missing pixel or a pixel that is always lit).
y
When the same image is displayed for hours on end, its afterimage may remain after
switching to a new image. When this happens, the screen will recover slowly by changing
the image. Turning the LCD monitor off for several hours will also correct this
problem.
Package contents
LCD display
D-Sub signal cable
(optional)
(with speakers)
Power cable
DVI signal cable
User's Guide (CD)
2
Quick Start Guide
Installation instructions
Placement
Note: Read the Safety section carefully before starting the installation.
When installing your LCD monitor, consider the placement of the monitor:
y
To minimize the reflection of the monitor, protect your eyes, and ensure
premium quality, don’t install your LCD monitor near windows or where
there is backlight. Keep the monitor at least 30 cm away from your eyes.
y
The upper edge of the monitor should be just a little higher than your
line of sight.
y
Adjust the front and back dip angles of the monitor, so that you can
view the display comfortably.
Connecting the base to the monitor
Installati
on
Take the base out of the box and place it on a
flat table.
y
Position the monitor on top of the base.
y
Connect the base into the neck of the monitor
along the track.
y
You will hear a click sound when the base
and the monitor are properly connected.
Connecting the LCD monitor to a PC
y
Make sure that the power supply of your PC
is turned off and the power plug is removed.
y
Connect and fasten both ends of the signal
cable to your PC host and LCD monitor,
respectively.
y
Connect the attached power cable to your LCD
monitor.
y
Plug the power cable into the receptacle.
y
Use the cable tie to bind up the power cord
and the D-sub signal cable / DVI-D cable.
y
Turn on the power supplies of your PC and
LCD monitor.
X Power cable
Y DVI signal cable
(optional)
Z D-Sub signal cable
3
External
controls
1
Power source
2
Menu
OSD Menu
3
>
Plus
4
<
Minus
5
Auto
Automatic
adjustment
Power On/Off
Green indication: Power is on and normal.
Orange indication: Sleep status in the energy-saving
mode.
Colorless indication: Power off.
Press this button to enter OSD. Press it again to exi
OSD.
Press this button for selection or adjustment when
OSD is started.
Press this button and click < and > to adjust volume
when OSD is not started (for the model with speakers
only).
Press this button to exit the manual when OSD is
started.
Press this button for the display to optimize the
position, phase and clock pulse automatically when
OSD is not started.
4
The image settings of your LCD monitor were adjusted to their optimal status
Image
adjustment for analog TV before shipment. (See Page 9). If you want to adjust the image
for analog
settings to suit your personal preference, follow the steps below:
1.
Click Menu to display the OSD window as shown in the following figure.
2.
Click Plus or Minus to select the function to be adjusted as shown in
the following figure.
3.
Click the Menu again to select the function to be adjusted.
4.
Click Plus or Minus to change current settings.
5.
To exit the OSD window, select "
" to close and save changes. To change
other settings, repeat steps 2-4.
Bright/Contract
Phase/Clock pulse
Horizontal/Vertical
Color Temp. Adjustment
Language Selection
OSD Setting
Auto
Message
Restore
Exi
(Analog)
5
The image settings of your LCD monitor were adjusted to their optimal status
Image
adjustment for digital TV before shipment. (See Page 9). If you want to adjust the image
for
settings to suit your personal preference, follow the steps below:
digital
1. Click Menu to display the OSD window as shown in the following figure.
2.
Click Plus or Minus to select the function to be adjusted as shown in
the following figure.
3.
Click the Menu again to select the function to be adjusted.
4.
Click Plus or Minus to change current settings.
5.
To exit the OSD window, select “
” to close and save changes. To change
other settings, repeat steps 2-4.
Bright/Contrast
Phase/Clock Pulse
Horizontal/Vertical
Color Temp. Adjustment
Language Selection
OSD Setting
Input Selectio
Message
Restore
Exit
(Digital)
6
Screen
Function Definition
adjustment
Secondary
Primary
Secondary
Description
directory directory
directory items
symbol
symbol
Adjusts the contrast between the foreground
Contrast
and background of an image on the screen.
Adjusts the background brightness of the
Brightness
screen.
Adjusts the focus of the image
Phase
(for analog input adjustment only).
Adjusts the clock pulse of the image
Clock pulse
(for analog input adjustments only).
N/A
N/A
N/A
Horizontal
Moves the image left and right on the screen
(for analog input adjustments only).
Vertical
Moves the image up and down on the screen
(for analog input adjustments only).
Warm color
Sets the color temperature to warm white.
temperature
Cold color
Sets the color temp to cold white.
temperature
User
Definition/Red
User
Definition/Gree Adjusts red/green/blue gain.
n
User
Definition/Blue
English
N/A
N/A
Deutsch
N/A
Français
N/A
Español
N/A
Italiano
Used to select the language you want.
N/A
N/A
N/A
Hollands
N/A
Suomalainen
N/A
Русский
Horizontal
Moves OSD left and right.
Vertical
Moves OSD up and down.
OSD time display Adjusts OSD time display settings.
Sets up horizontal, vertical, sequence and
focus automatically (for analog input only).
N/A
Auto adjustment
N/A
Analog digital
Used to select the input source you want (for
DVI input only).
N/A
Message
Display resolution, H/V frequency and the
input port used for current input timing
function.
N/A
Restore
Restores system to default settings.
N/A
Exit
Closes the OSD window and saves changes.
7
Attachments
Plug and play y
y
The product provides the latest VESA plug and play feature to prevent
complicated and time-consuming installation procedures. The plug and
play feature allows your computer system to identify the LCD monitor
easily and set up its functions automatically.
The LCD monitor transfers the Extended Display Identification Data
(EDID) to your computer system via the Display Data Channel (DDC),
so that your computer can use the self-setting function of the LCD
monitor.
The LCD monitor has a built-in Power Control System (Power Saver).
y
When the LCD monitor is not operated for a period of time, the Power
y
Power saver
Control System automatically sets the system at low voltage status
to save power. Move the mouse slightly or press any key to return
to normal operation.
y
The Power Saver function can only be operated by the display card
of the computer system. You can set up this function from your computer.
y
The LCD monitor is compatible with EPAENERGY STAR NÜTEK when used
with VESA DPMS.
y
To save power and extend the life of the product, turn off the LCD
monitor power supply when it is idle for a long time or not being
used.
Troubleshooting
Power LED does y
not light
Icon off
Check that the power switch is turned on.
y
Make sure the power cable is connected.
y
Check that the power switch is turned on.
y
Make sure the power cable is connected.
y
Ensure that the signal cable is inserted in the receptacle
appropriately.
y
The Power Saver may turn off the monitor automatically during the
operation. Make sure the monitor is restored when you press any key
from the keyboard.
Color default y
Refer to "Color Temp. Adjustment" to adjust RGB color or select color
temperatures.
Instability
y
or ripple
Remove any electronic equipment in the vicinity that may cause EMI
interference.
y
Check the signal cable of the monitor to ensure that none of the pins
are bent.
Image offset
y
or wrong size y
Press the auto adjustment button to automatically optimize the screen.
Set up the reference position.
8
Technical specifications
LCD panel
(backlight
source)
Input signal
Panel dimension
Diagonal 559 mm (22 inch) LCD monitor
Max. resolution
1,680 x 1,050 / WXGA+
Max. pixel
Up to 16.2 M true color
Pixel span
Horizontal 0.282mm x Vertical 0.282mm
Brightness
300 cd/m2
Contrast
700 : 1
LC response time
5 ms
Visual angle
Horizontal 170° / Vertical 160°
Effective display
Horizontal 473.8 mm x Vertical 296.1 mm
Signal mode
Simulated video frequency: 0.7 Vpp, 75Ω
(separate SYNC and composite SYNC)
Horizontal 30 kHz – 82 kHz x Vertical 56 Hz – 76
Hz
135MHz
SYNC frequency
Max. pixel clock
Input terminal Image
Power transformer
Operation mode
Power
consumption
Power saving sleep
mode
D-Sub 15 PIN (VESA) / DVI-D (Optional)
AC100 – 240 Volts, 50 – 60 Hz
48W
2W @230VAC 50Hz
Power saving off mode 1W @230VAC 50Hz
Environmental
conditions
Temperature
5°C – 35°C (operation) / -20°C – 55°C (storage)
Humidity
20% – 80% (operation) / 20% – 85% (storage)
Actual dimensions (W x D x H)
513.5 x 198.2 x 405.2 mm
Net weight
4.9 kg
Safety standard
TCO03;UL/CUL;TÜV-GS;CE/LVD;TÜV-ERGO;CB;CCC;FCC-B;V
CCI-B;
CE/EMC;C-Tick; BSMI; ISO
13406-2;EPA;PCT;NOM;WEEE;PSB;HG
Lamp disposal
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org.
9
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Cet appareil numérique de la class B respecte toures les exigencies du Réglement
sur le materiel brouilieur du Canada.
Display modes If the signal of your PC system is the same as one of the following reference
signal modes, the screen will be adjusted automatically. If not, the screen
will not display or only the LED lights will display. For more information
about the adjustment mode, refer to the instructions of your display card.
Hor.
Vert.
Pixel
SYNC Polarity
Display Mode
Frequency
Frequency
Frequency
(kHz)
(Hz)
(MHz)
31.469
59.940
25.175
-/-
37.861
72.809
31.500
-/-
37.500
75.000
31.500
-/-
35.156
56.250
36.000
+/+
37.879
60.317
40.000
+/+
48.077
72.188
50.000
+/+
46.875
75.000
49.500
+/+
48.363
60.004
65.000
-/-
56.476
70.069
75.000
-/-
60.023
75.029
78.750
+/+
SXGA 1152x864
67.500
75.000
108.000
+/+
SXGA 1280x1024
63.981
60.020
108.000
+/+
79.976
75.025
135.000
+/+
WXGA+ 1440x900
55.935
55.887
106.5
-/+
WXGA+ 1680x1050
65.29
59.954
146.25
-/+
VGA TEXT
720x400
31.469
70.087
28.322
-/+
Macintosh
640x480
35.000
66.667
30.240
-/-
832x624
49.725
74.500
57.283
-/-
1024x768
60.150
74.720
80.000
-/-
VESA
VGA 640x480
SVGA 800x600
XGA 1024x768
10
(H/V)
Download PDF

advertising