Connector Strips - Strand Lighting

Connector Strips - Strand Lighting
Strand Circuit Distribution Systems
Connector Strips
Power Connect Connector Strips from Strand
Lighting are designed to provide an electrical
distribution system for connecting portable
luminaires to your lighting system by placing
permanent lighting circuits within your facility.
Based on our proven R21 Powered Raceway
dimmer design, Power Connect Connector Strips
can be supplied with a variety of flush mounted or
pigtail connectors, and can be mounted either
horizontally or vertically.
Power Connect Connector Strip
Features
●
• 2 Inch high standard vinyl labels standard on one side. Two
sided and lamicoid labels are available as an option
16-gauge steel strip finished in a textured black-powder
coat finish
• Standard connectors include Stage Pin, Twist-Lock® and
Edison in flush or pigtail mounting versions
• Circuits may be wired to multiple outlets on the connector
strip
• Our "Z-Fold Tiered Packaging" is designed to accommodate
the use of palette jacks and forklifts to transport the
connector strip from our factory to your job site. This
unique shipment method also assures that your connector
strip arrives at your project site scratch and dent free.
• Wired with high temperature wire to DIN rail mounted
screw terminal blocks
• "Z-Fold Tiered Packaging" allows us to deliver a completely
fabricated pre-wired connector strip. The installing
contractor unfolds the connector strip from the Z-Fold Tier
and installs prethreaded splicing kits between each section,
and connects the field wiring to the Power Connect
Connector Strip terminal box.
• Custom lengths and configurations are available
• Pigtail connectors provided with strain-relief bushings
• ETL and cETL listed and labeled
• A wide variety of hangers for pipe mount and wall mount
applications are available
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Connector Strips
Grid Iron
Junction Box
Strand Circuit Distribution Systems
Rigging System (by others)
Kellums
Strain Relief
Power Connect
Connector Strip
Terminal Box
Mounting
Bracket
Kellums
Support Grip
SO Multi Cable
Cable Cradle
Cable Clamp
Pigtail Connector
Flush Mount
Connector
Ordering Information
Cat No.
Description
Lighting Fixture
Pipe (by others)
Note, sample system diagram for illustrative purposes only. Some items
shown are by others and not available through or provided by Strand Lighting.
96700-XXXX Power Connect Connector Strip
Grid Iron Boxes
(Note, “-XXXX” is part of your custom part number)
97051
97052
97053
97054
97055
97056
Brackets
71444
71440
71443
71441
71445
71442
Single Pipe Overhung Hanger Bracket
Single Pipe Rigged Hanger Bracket
Double Pipe Offset Hanger Bracket
Double Pipe Rigged Hanger Bracket
Threaded Rod Bracket
Wall Mount Hanger Bracket
Grid Iron Junction Box – 16 Terminals
Grid Iron Junction Box – 30 Terminals
Grid Iron Junction Box – 40 Terminals
Grid Iron Junction Box – 60 Terminals
Grid Iron Junction Box – 72 Terminals
Grid Iron Junction Box – 100 Terminals
Clamps / Cradles
95550
95551
95501
Cable Clamp
Cable Cradle, Small
Cable Cradle, Large
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: +1 (212) 213-8219
Fax: +1 (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
021213NA
www.strandlighting.com
© Philips Group 2013
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
Strand Lighting Controls
Relay Panels
Contact Relay Panels come in four panel sizes for 12, 24,
36 and 48 relay variants. Contact Relay Panels are ideal
for a wide range of control and energy management
applications.
The system’s integrated clock provides full astronomical
time control for hundreds of events with full day-of-theweek and calendar scheduling. The integrated flash warn
feature provides visual warning of any timeclock control
action.
Contact is easy to set up and configure with a simple
walkaround interface for connecting control stations to
relays, as well as a computer-based configurator for
advanced installations.
Contact Relay Panel
Features
●
Recessed or surface-mount relay panel
•
Password protected LCD screen and pushbuttons makes
easy system configuration, or configure via your personal
computer
●
Individually fed branch circuits or 3-Phase MLO power
options
•
cCSAus Listed
•
Master - Slave operation one rack processor can run up to
96 relays or dimmers
•
Space for 12, 24, 36 or 48 relay poles per enclosure
•
Single and Double pole relays rated for 20 amps 120, 230,
277, and 347 volts
Cabinets may be linked to A21 dimmer racks to provide a
fully integrated solution
•
•
Barriers available for systems fed from breaker panels to
allow for 120/277 volt feeds
•
Vision.net control station support
•
DMX512 Input
•
Optional ShowNet Ethernet
•
Astronomical clock
•
Active Power Management is an available option on all
Contact relay panels with integral circuit breakers
•
Local control of all relays
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Strand Lighting Controls
Relay Panels
24 Circuit Relay Panel
12 Circuit Relay Panel
22.00 in.
0.18 in.
14.38 in.
0.18 in.
4.00 in.
4.00 in.
23.50 in.
High Voltage
Access Panel
Low Voltage
Access Panel
21.90 in.
21.50 in.
20.9 in.
0.18 in.
Control Panel
High Voltage
Access Panel
Control Panel
Low Voltage
Access Panel
36 Circuit Relay Panel
48 Circuit Relay Panel
22.00 in.
22.00 in.
0.18 in.
0.18 in.
4.00 in.
4.00 in.
High Voltage
Access Panel
High Voltage
Access Panel
23.50 in.
23.50 in.
0.18 in.
0.18 in.
34.80 in.
Low Voltage
Access Panel
Control Panel
34.80 in.
Low Voltage
Access Panel
Control Panel
Relay Panels
Strand Lighting Controls
Strand Lighting Active Power Management Technology
Contact Relay panels with integral breakers support Active
Power Management technology. Relays with Active Power
Management sensors installed will report load status and
may have a maximum load set on a per relay basis in one
amp increments. Active Power Management can be
installed in blocks of four relays.
Active Power Management allows designers to securely set
limits on circuits to meet watts per square foot requirement
on track lighting and other circuits to meet energy
conservation codes. Once a circuit has a load limit set at
commissioning the limit cannot be changed. Load
monitoring and status reporting is also a standard feature
of Active Power Management allowing a facility to
dynamically monitor and adjust lighting loads.
Vision.net Stations and Sensors
Connecting Contact to our popular range of Vision.net controls will allow system
designers to create and operate easy-to-use lighting systems that fully integrate local
control with occupancy sensors and photo cells.
Lighting Control without Active Power Management
Lighting Control without Active Power Management
Main feed to
relay panels
Micro Circuit
Breaker Panels
2-Wire Branch Circuit Terminations
Contact Relay Panels
Micro Circuit Cabinets
Track Lighting
72
144
72
Total Terminations
288
Contact Relay Panels
Lighting Control with Active Power Management
Lighting Control with Active Power Management
Main feed to
relay panels
2-Wire Branch Circuit Terminations
Contact Relay Panels
Track Lighting
Contact Relay Panels
Total Terminations
72
72
144
Relay Panels
Strand Lighting Controls
Contact Relay Panel
Ordering Information
Cat No.
Description
Contact Relay Panels
Contact Relay Panel Options
Contact Relay Panels - individually fed (1), (3)
Control Options
76910
76911
76912
76913
76960
76961
74161
76924
76990
Relay Insert Panel, 12-circuit
Relay Insert Panel, 24-circuit
Relay Insert Panel, 36-circuit
Relay Insert Panel, 48-circuit
Master Control Option
Auxiliary Control Option (operates with a master panel)
Ethernet Control Module
UL 924 Kit
Barrier Kit
Contact Relay Panel Power Modules with 3-phase input and
breakers for 120 volt power supplies (1), (2), (3)
Relay Options
76921C
76922C
76923C
76991
76992
Relay Insert Panel with Breakers, 24-way
Relay Insert Panel with Breakers, 36-way
Relay Insert Panel with Breakers, 42-way
Relay, 1-pole
Relay, 2-pole (occupies two slots)
377V Power Supply Option
Contact Relay Panel Power Modules with 3-phase input and
breakers for 277 volt power supplies (1), (2), (3)
76931C
76932C
76933C
Relay Insert Panel with Breakers, 24-way
Relay Insert Panel with Breakers, 36-way
Relay Insert Panel with Breakers, 42-way
Contact Relay Panel Enclosures
CONBOX-1
CONBOX-2
CONBOX-3
CONBOX-4
Enclosure for use with 76910 insert
Enclosure for use with 76911 insert
Enclosure for use with 76912 / 76913 / 76921C /
76931C inserts
Enclosure for use with 76922C / 76923C / 76932C /
76933C inserts
76952
277/347V Power Supply for control electronics
Circuit Breaker Options
76966
76967
76969
Circuit Breaker, 1-pole, 20A, 120V
Circuit Breaker, 2-pole, 20A, 120V
Circuit Breaker, 1-pole, 20A, 277V
Notes:
(1)
(2)
(3)
When ordering, specify control options and relay
types (number of 1 pole or 2 pole). Note, 2-pole
relays occupy (and count as) two relay slots.
Panels with circuit breakers come with 3-phase
mains lugs for power input.
Panel inserts only. When ordering, specify relay
panel enclosure. See Contact Relay Panel
Enclosures for required enclosure type.
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, Texas 75238
Tel: (214) 647-7880
Fax: (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: (212) 213-8219
Fax: (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Room 6-10,
20/F Delta House
3 On Yiu Street
Shatin, N.T. Hong Kong
Tel: + 852-2757-3033
Fax: + 852-2757-1767
061711NA
www.strandlighting.com
© Philips Group 2011
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Marssteden 152
Enschede 7547 TD
the Netherlands
Tel: +31-53-4500424
Fax: +31-53-4500425
Strand Architectural Controls
Vision.net 4 is a fully integrated suite of architectural lighting
controls designed to meet the needs of the most demanding
customers. Scalable from a single room to large multibuilding campuses our decentralized control approach
delivers maximum reliability and flexibility.
Designed to integrate with all of our dimming systems, low
voltage switching cabinets and DMX drivers Vision.net 4 can
control any lighting load with intuitive precision.
Vision.net 4 7-Inch Color Touchscreen
Features
●
Next generation scalable architectural control from a single
room to a multi-building campus
●
Scales from a single space up to 255 rooms in a single
system. Systems may be linked to build a system with up to
1000 systems each with 255 rooms
●
Distributed intelligence - no central processor required
●
Available with push button, slider and touchscreen panels
●
Simple computer-based set up and configuration with
Vision.net 4 designer software
●
Fully scalable to over 1,000 stations
●
Occupancy sensors and photocells available
●
Designers can easily create rooms, room combinations and
easily define stations and buttons
●
Vision.net 4 designer provides a simple graphical set up
and configuration system for original set up and updates as
the needs of a facility changes
●
Low-cost Cat 5e wiring
●
Touchscreen systems provide connectivity to PaletteOS
consoles and dimmer racks for system access and
monitoring
●
Smart jacks allow portable stations to be customized for
each room. One portable can be used in multiple spaces
each with a unique configuration.
●
127 channels per room
●
Unlimited dimmers per room with patching and DMX512
snapshot support
●
255 stations per system
●
Astronomical time-clock and calendar-based events
●
Connects to C21, EC21, A21, R21 and Contact systems
●
Vision.net 4 to DMX512 module available for DMX512
controlled devices
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Strand Architectural Controls
Vision.net 4 Touchscreen Features
●
Full-color touchscreens available in a range of screen sizes
●
Screens may be easily configured and set up with Vision.net 4
Designer software with USB, serial data, and Ethernet
interfaces
●
Using our optional ShowNet Ethernet connectivity touchscreens
can provide remote access to Strand Lighting Rack Palette,
Palette, and Light Palette control consoles, C21, EC21 A21, and
R21 dimming systems
●
Touchscreens provide system astronomical time-clock and
calendar functions
●
Portable touchscreens available
●
Fully graphical-room combine supported
●
A variety of backgrounds and button styles are available to create
dynamic easy to use screens
●
Wide range of on-screen button and fader options
●
Multi-language text support is available along with a large
selection of icons allow users to label and inform users
●
Web browser available for all network-based stations
●
Screen support is available from a variety of clock displays and a
stop watch timer for theatrical applications
Vision.net 4 Touchscreen
Touchscreen Set-up Slider/Button View
Vision.net 4 Occupancy Sensors
Vision.net 4 occupancy sensors and photocells provide dynamic lighting control for your facility. Choose from two ceiling-mount
occupancy sensors to meet the specific needs of your system. Photocell stations provide a choice of lumen maintenance and
daylight harvesting. All settings and features of Vision.net 4 occupancy sensors and photocells are easily programmed - from the
ground without the use of ladders - using the IR Sensor Programming remote.
8'
12'
10'
18'
24'
12'
20'
25'
25'
45'
30'
60'
Field of View: Occupancy Sensor (63059CM)
Field of View: Occupancy Sensor (63059HB)
63063 IR Sensor Programming
Remote Transmitter
Strand Architectural Controls
Vision.net 4 Control Station Features
●
All station buttons and faders are fully programmable
●
All stations include integrated processors and may operate as
stand-alone systems
●
Station set up and configuration is simple
●
Configuration software can upload and download station set-up
data
●
Commands include (but are not limited to):
- Raise/lower
- Preset
- Toggle on/off
- Smart commands allow multiple system commands to be
executed from a single button press
Vision.net 4 stations provide a wide range of button
and slider stations. Any button can be programmed
with a wide range of functions.
- Commands to PaletteOS consoles
●
All keypads feature programmable backlighting
●
Custom-configurable button and slider stations
●
IR Remote port
●
Optional IR Remote Transmitter with four-room, four-scene
control, master raise/lower, and all on/off
●
Available in five standard colors:
White
Ivory
Brown Black
Gray
Button stations allow for custom engraving and are
backlit to show what scene is active.
Strand Architectural Controls
Vision.net 4 Designer
●
Windows-based configuration software
●
Simple point and click operation
●
Easy download and upload of station
configuration data to an entire system
from a single access point
●
Built in design tools and system
simulators allow users to fully test and
simulate their systems
●
Drag and drop touchscreen setup
Vision.net 4 Designer set-up screen.
System outputs may be simulated so
that you can easily test your design
and configuration.
Web browser available for all
network-based stations.
Optional remote access to Strand
control consoles via ethernet.
Strand Architectural Controls
Ordering Information
Cat No.
Description
Vision.net 4 Control Stations
Touchscreen Stations
95242A
95242B
95242P
95242SE
95242RM
Vision.net 4 7-inch color VGA touchscreen
station, light almond*
Vision.net 4 7-inch color VGA touchscreen
station, black*
Vision.net 4 7-inch color VGA touchscreen
station, portable in Hammond Case
Vision.net 4 7-inch color VGA touchscreen
station, flush, locking enclosure, black
Vision.net 4 7-inch color VGA touchscreen
station, rack mount, black
95246RM
95246SE
Vision.net 4 15-inch color VGA touchscreen
station, rack mount
Vision.net 4 15-inch color VGA touchscreen
station, rack mount, with locking enclosure
* Note, these items require one of the following back boxes:
95243
Vision.net 4 7-inch flush mount back box kit
for 95242A or 95242B
Vision.net 4 7-inch surface mount back box
kit for 95242B
95244
Pre-populated Standard Stations
Custom Stations
63303
63398
63322
63306
63309
63321
63312
63315
Vision.net 4 slider station with IR, 3 channel
& master, 6 presets, 2-gang
Vision.net 4 slider station with IR, 6 channel
& master, 6 presets, 3-gang
Vision.net 4 slider station with IR, 9 channel
& master, 6 presets, 4-gang
Vision.net 4 push button station, 1 button,
1-gang
Vision.net 4 slider station, 12 channel &
master, 7 presets, 5-gang
Vision.net 4 slider station, 15 channel &
master, 7 presets, 5-gang
Custom Vision.net 4 station
Vision.net 4 push button station, 2 button,
1-gang
Vision.net 4 push button station with IR, 4
button, 1-gang
Vision.net 4 push button station with IR, 8
button, 1-gang
63324
63328
Notes:
To make any station portable, add "P" to the part number.
IR = Integrated Infrared Receiver
Color Suffix: -White, -Ivory, -Brown, -Black, -Gray
Vision.net 4 stations may be custom configured for your facility by indicating the number of buttons or sliders that are required in each gang position.
Module 1 (1st Gang)
Button or
Slider
1
2
3
4
5
6
7
8
1
2
3
4
Module 2 (2nd Gang)
Button or
Slider
1
2
3
4
5
6
7
8
1
2
3
4
Module 3 (3rd Gang)
Button or
Slider
1
2
3
4
5
6
7
8
1
2
3
4
Module 4 (4th Gang)
Button or
Slider
1
2
3
4
5
6
7
8
1
2
3
4
Strand Architectural Controls
Ordering Information
Cat No.
Description
Accessories
Occupancy Sensors and Photocells
Vision.net 4 DMX Interface
63059CM
63059HB
63060CM
63063
63054
63065SE
Ceiling-mount occupancy sensor
High bay-mount occupancy sensor
Ceiling-mount photocell
Remote programmer for occupancy sensors
and photocells
AV input/occupancy sensor interface
Vision.net 4 to DMX512 interface
Vision.net 4 Data Cable Splitter
63055RM
63055SE
Vision.net 4 Portable Extension Cables
Vision.net 4 4 way data cable splitter for
panel mounting
Vision.net 4 4 way data cable splitter with
enclosure
Note: All table top stations include one 25 ft. cable
Vision.net 4 Configuration Software
95095
67518
95096
95097
Vision.net 4 Portable Extension Cable, 10FT
(3M), (A4M-A4F)
Vision.net 4 Portable Extension Cable, 25FT
(8M), (A4M-A4F)
Vision.net 4 Portable Extension Cable, 50FT
(16M), (A4M-A4F)
Windows configuration software on CD-ROM
Receptacle Stations
63341
63035
Vision.net 4 Smart Jack receptacle, 1 gang*
Vision.net 4 RS232 programming station*
* Includes stainless steel faceplate with insert
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: (214) 647-7880
Fax: (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: (212) 213-8219
Fax: (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852-2796-9786
Fax: +852-2798-6545
030612NA_EUA
www.strandlighting.com
© Philips Group 2012
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Marssteden 152
Enschede 7547 TD
the Netherlands
Tel: +31-53-4500424
Fax: +31-53-4500425
Strand Control Systems
PaletteVL Lighting Control Console
PaletteVL
There’s so much that’s new with Palette VL. And so
much that you already know. The Palette VL family of
consoles bridge between the clean simple operation of
our regular Palette consoles with the control and
sophistication of our larger Light Palette VL consoles.
Now you can have the power of conventional and
moving light control in a value priced system. Palette VL
features an integral trackball, moving light encoders and
direct action attribute keys to extend the power of the
Palette family of consoles. Available with 500 to 8,000
channels, the new consoles now offer an optional
second video display to present more information to
console operators, including an advanced moving light
control screen.
PaletteVL Lighting Control Console with 64 Submasters
Features
●
16 or 64 Submaster models with Unlimited Submaster Pages
●
Tracking, Cue Only or Preset operation
●
Two DMX ports with 1,024 outputs
●
Low profile "easy touch" bump buttons
●
Integrated Moving Light Controls with integrated trackball, and 4
rotary encoder wheels
●
Light Palette-style encoder wheel
●
Support for two video displays (touchscreen optional)
●
Hard disk for show file storage
●
Wired and wireless focus remote options
●
USB key for external show file storage
●
Windows Off-line Editor
●
Strand ShowNet standard on all systems with over 18,000 DMX
outputs
●
Available with up to 8,000 channels
●
Split memory playback
●
25 Button Array for Group / Palette Selection
●
Unlimited effects playbacks
●
Vision.net control interface for seamless interface between
Entertainment and Architectural controls
●
Microsoft Windows Operating System
●
High-resolution Graphical User Interface with mouse
●
Unlimited cues, groups, subs and effects per show
●
Network support for a wide range of Ethernet data protocols
including ShowNet, streaming ACN, ArtNet, Pathway and Color
Kinetics networks
●
PaletteOS's Universal Attribute Control - Automated lighting
control with the intelligent fixture library
●
Up to 26 part cues
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
PaletteVL Lighting Control Console
Strand Control Systems
Introduction
Strand’s new Palette VL consoles build on the most successful
lighting control operating system to bring you PaletteOS, a high
resolution point/click graphic environment to unleash your creativity
and speed up workflow. At its core, PaletteOS is all about real world
control with simple direct operation to record cues and set levels,
coupled with an intuitive approach to moving light control. Colors
quickly match to the color filters you know, gobos rotate in RPM not
DMX values and our displays deliver real information that you need all
the time. Available in two models one with 16 submasters and one
with 64 submasters, there is a Palette VL to meet your needs.
Palette has a powerful web browser that lets you configure and
monitor your network and interact directly with Strand’s
award-winning C21 dimming systems. Right there on the console
screen. And if one screen is not enough, the PaletteVL comes
standard with two video connections.
And Palette is an elegant and highly functional lighting console,
leveraging industry-standard technologies to make it robust and
future-safe. Palette’s brain is a rugged industrial PC that could be
swapped in seconds if you ever needed to. Palette has a generous
hard drive, or you can save your shows anywhere on the network. You
even get a shiny new USB key for show storage.
Oh, and you can even read your existing Strand 300 and 500 series
console show files, bringing new life to your repertory of productions.
PaletteVL Lighting Control Console with 16 Submasters
Strand Control Systems
PaletteVL Lighting Control Console
PaletteVL Lighting Control Console with 16 Submasters
Power Input
Processor
DMX512 Out (XLR-5M)
PaletteVL Lighting Control Console with 64 Submasters
Power Input
Processor
DMX512 Out (XLR-5M)
Strand Control Systems
PaletteVL Lighting Control Console
Technical Specifications
Dimensions (LxWxH):
Electrical
Supply Voltage:
Universal power supply 90-240V
Approvals:
ETL listed and CE marked
92811/92812/92813: 25.3 x 18.2 x 4.3 in.
642.6 x 462.3 x 109.3mm
92814/92815/92816: 39.1 x 18.2 x 4.3 in.
993.1 x 462.3 x 109.3mm
Connectivity
Mechanical
Construction:
Galvanized sheet steel and aluminum
extrusion and Flame retardant ABS
controls
1 Ethernet (RJ45) port, Strand ShowNet compatible
2 USB ports (rear)
Operating Temperature: 0° to 40°C ambient (32° to 104°F)
1 USB port (front)
Humidity:
5% - 95% non-condensing
2 VGA monitor outputs (monitors not included)
Storage Temperature:
-40° to 70°C (-40° to 158°F)
1 Serial port
2 DMX512 (XLR5) ports
Weights:
92811/92812/92813: 26.8 lbs (12.2 kg)
92814/92815/92816: 46.0 lbs (20.9 kg)
Ordering Information
Cat. No. Description
PaletteVL Consoles*
Peripheral Equipment - Cables
92811-NC
92811
92812
92813
92814-NC
92814
92815
92816
Palette VL16 – 16 submaster Console - No Channels
Palette VL16 – 500 Channel, 16 submaster Console
Palette VL16 – 1000 Channel, 16 submaster Console
Palette VL16 – 1500 Channel, 16 submaster Console
Palette VL64 – 64 submaster Console - No Channels
Palette VL64 – 500 Channel, 64 submaster Console
Palette VL64 – 1000 Channel, 64 submaster Console
Palette VL64 – 1500 Channel, 64 submaster Console
95090
96456
96459
Includes:
*All consoles include Palette keyboard, mouse, dust
cover, USB key, power cord and printed installation
guide. Monitors not included.
Accessories
66216
67528
95220
95712
Palette Keyboard (additional)
USB Key Drive (additional)
20-inch Flat Panel Monitor
17-inch Touch Screen Flat Panel Monitor
Pocket Palette Wireless Kits
Peripheral Equipment - Software
66149
67509
67510
66150
50 Additional Channels with a NEW Console Purchase
50 Additional Channels for an EXISTING Console
DMX-512 Control Cable 25’ (A5F to A5M)
Ethernet cable 10’ 10/100BaseT (RJ-45)
Ethernet cable 25’ 10/100BaseT (RJ-45)
Pocket Palette Networked Kit (includes remote,
controller switch, and (2) access ports
Pocket Palette Standalone Kit (includes remote and
wireless access point)
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: +1 (212) 213-8219
Fax: +1 (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
120312NA_EA
www.strandlighting.com
© Philips Group 2012
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
Strand Lighting Control Systems
ShowNet Nodes
DMX512 Networking Nodes
Compact and flexible, the N21 ShowNet Node provides
cost-effective network connectivity for facilities of all sizes.
Each node features two or four DMX512 connectors that may
be dynamically configured for input or output operation.
N21 ShowNet Portable Node
Based on a 32-bit ARM processor, all N21 nodes utilize the
Linux operating systems for stable 10/100BT operation.
Nodes may be configured with any web browser. Node status,
Node ID, and DMX512 port identification are available on the
integral LCD display. The display features adjustable back
lighting.
All Strand Lighting N21 ShowNet nodes feature advanced
DMX512 patching, permitting any range of 512 numbers to be
selected for each DMX512 port. Priority patching with up to
three levels of priority assignments is available.
N21 ShowNet Rack Mount Node
Features
• Compact and cost-effective ShowNet DMX512 nodes
• Adjustable backlight levels for dark applications
• Fast 40 Hz DMX512 update rate
• Fully compliant with IEEE802.3af power over Ethernet
• DMX512 ports may be custom configured with any 512
DMX512 addresses for complete system flexibility
• Dimmer status reporting link available on any port for
legacy dimming systems
• One port may be configured to support Vision.net control
input to ShowNet networking
• N21 ShowNet Nodes may be configured with a standard
web browser
• 10/100BT Ethernet operation
• Each node may be configured using any Pocket Palette
wireless remote
• Integral LCD display provides node and port labeling
• Portable node fits standard two-gang back boxes
• Local screen selector provides node status and
configuration information
• 32-bit processor standard with Linux O/S
• Compatible with all N21 ShowNet nodes and control
systems
• 1U rack mount nodes available with 4 DMX512 ports
• N21 ShowNet nodes are available in portable, wall mount
and 1U rack mount variants
• Surface mount and pipe mount versions available
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Strand Lighting Control Systems
ShowNet DMX512 Nodes
65151 N21 ShowNet Node, 2-Port, POE, 2-gang
4.5 in
114.3 mm
65152 N21 ShowNet Node, 2-Port, POE, SN110 Retrofit
4.5 in
114.3 mm
3.625 in
92.1 mm
4.625 in
117.5 mm
3.5 in
88.9 mm
4.625 in
117.5 mm
2-Gang Back Box
(by others)
Back Box
(by others)
65153 N21 ShowNet Node, 2-Port, POE, with Surface Mount Box
65153P N21 ShowNet Node, 2-Port, POE, with portable
mount back box, C-Clamp and U-Bolt Hardware
2-inch
U-Bolt
C-Clamp
4.5 in
114.3 mm
3.625 in
92.1 mm
4.625 in
117.5 mm
Ethernet
Connection
Surface
Mount Box
NOTE: 65153P Node shares same
dimensions as 65153 Node.
3.625 in
92.1 mm
65154 N21 ShowNet Node, 4-Port, 1U Rack Mount Enclosure with AC Adapter
AC to DC Power Supply
(included with unit)
REAR VIEW
19.00 in / 482.60 mm
6.50 in / 165.10 mm
1.72 in / 43.64 mm
FRONT VIEW
NOTE: Drawings are not to scale.
SIDE VIEW
Strand Lighting Control Systems
ShowNet DMX512 Nodes
Simplified programming and configuration.
Using a simple point-and-click web browser interface, routing DMX512 is very
easy and the most powerful part of a Strand Lighting ShowNet network. Over
32,000 DMX512 addresses are supported on all Strand networks.
Technical Specifications
Environmental Data
Connectivity
DMX512:
Ethernet:
2 Each, 5-pin female XLR
1 Each, RJ45
Operating Temperature: 32 to 104ºF / 0 to 40ºC
Storage Temperature: -40 to 158ºF / -40 to 70ºC
Humidity:
5% - 95% non-condensing
Mechanical Data
Electrical Data
Construction:
Wall Mount:
Rack Mount:
Weight:
Wall Mount:
Rack Mount:
Dimensions:
Wall Mount:
Rack Mount:
Steel faceplate, unit is designed to fit
a standard deep masonry box
Steel enclosure
Input Power:
Wall Mount:
Rack Mount:
1.9 lbs / 0.86 kg
4.9 lbs / 2.2 kg
IEEE 802.3AF Power over Ethernet on
all 2-port models.
AC to DC Power Supply, Universal
Voltage (included)
Refer to Drawings on Page Two
Refer to Drawing on Page Two
Ordering Information
Cat No.
Description
N21 ShowNet DMX512 Networking Nodes
65151
65152
65153
N21 ShowNet Node, 2-Port, POE, 2-gang
N21 ShowNet Node, POE, SN110 retrofit
N21 ShowNet Node, 2-Port Node, POE, with surface
mount back box
65153-P
65154
N21 ShowNet Node, 2-Port, POE, with portable mount
back box, C-clamp/U-bolt hardware
N21 ShowNet Node, 4-Port, 1U rack mount enclosure,
universal AC adapter
Strand Lighting Control Systems
ShowNet DMX512 Nodes
This page intentionally left blank
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: +1 (212) 213-8219
Fax: +1 (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
022813NA_EUA
www.strandlighting.com
© Philips Group 2013
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
Selecon LED Fixtures
PL House Light LED Luminaire
for New Construction
PL House Light LED Luminaires
A revolutionary break through in Theatrical and Entertainment House Lighting. Drawing on technology and
specific insight, nurtured and developed with in the
Philips Entertainment group the PL House Light LED
Luminaire offers an RGBW 50,000 hour L70 replacement
for 300 and 500 watt halogen house lights.
Being an RGBW LED luminaire the PL House light also
aides in the overall lighting design of a production giving
designers the control and flexibility to immerse the
audience in color.
PL House Light LED Luminaire
for Retrofit Applications
Features
Fully tunable high output RGBW LED light engine
supporting color temperatures from 2300K to 9970K and
full color mixing with a maximum output similar to that of
a 70 watt metal halide luminaire
No ultra-violet (wavelengths of less than 400nm) - for UV
- A, B or C or the Infrared spectrum (wavelengths of more
than 775nm) are emitted by PL House Light LED
luminaires
High CRI is maintained down to very low light levels (>50
Lux) as the integral dimmer (0 to 100%) reduces intensity
with minimal color shift maintaining the selected color
balance
Choice of wireless DMX 512 receiver compatible with
Wireless Solutions W-DMX, Lumen Radio Wireless DMX,
and City Theatrical Show DMX (all sold separately)
Quick selection of Warm White, Cool White and Daylight
color presets simplifies matching existing light sources
Adjustable 20° to 45° beam spread
Defined maximum energy consumption with power
presets - from 30 watts to full power
Available with either black or clear (polished) reflectors for
new construction or retrofit applications
On-board LCD display and menu system for easy setup and
control
Electronic power supply; ETL / cETL approved and CE
marked
LED light engine is comprised of a single chip with RGBW
LEDs
Full color mixing for creative flexibility in lighting your
display - PL House Light LED luminaire features a broad
color gamut with precise color mixing controls
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Selecon LED Fixtures
PL House Light LED Luminaire
Photometrics (Feet / Foot Candles)
40o Beam Spread (Lens Tube at #6)
Beam Diameter
7.26
10.89
14.52
18.15
21.78
Throw Distance
10
15
20
25
30
Central Illumination
Foot Candles
Warm White (3,200K)
59
26
15
9
7
Cool White (4,000K)
78
35
20
13
9
Day Light (5,600K)
98
43
24
16
11
30o Beam Spread (Lens Tube at #8~#9)
Beam Diameter
5.32
7.98
10.64
13.30
15.96
18.62
21.28
Throw Distance
10
15
20
25
30
35
40
Central Illumination
Foot Candles
Warm White (3,200K)
108
48
27
17
12
9
7
Cool White (4,000K)
150
67
38
24
17
12
9
Day Light (5,600K)
186
83
46
30
21
15
12
20o Beam Spread (Lens Tube at #10)
Beam Diameter
3.63
5.445
7.26
9.075
10.89
12.705
14.52
16.335
18.15
Throw Distance
10
15
20
25
30
35
40
45
50
Central Illumination
Foot Candles
Warm White (3,200K)
224
100
56
36
25
18
14
11
9
Cool White (4,000K)
316
140
79
51
35
26
20
16
13
Day Light (5,600K)
376
167
94
60
42
31
24
19
15
PL House Light LED Engine
PL House Light’s powerful LED engine offers exceptional performance and life. Under normal operating
conditions our LED engine has a life expectancy in excess of 50,000 hours, however under worst case
operating conditions with the luminaire set to continuous full output it is possible that a small percentage
of LED’s may require replacement sooner. The Philips Selecon three-year limited warranty includes our
guarantee against premature failure of the LED engine.
Selecon LED Fixtures
PL House Light LED Luminaire
Photometrics (Meters / Lux)
40o Beam Spread (Lens Tube at #6)
Beam Diameter
2.21
3.32
4.43
5.53
6.64
Throw Distance
3.05
4.57
6.1
7.62
9.14
Central Illumination
Lux
Warm White (3,200K)
629
280
157
101
70
Cool White (4,000K)
842
375
211
135
94
Day Light (5,600K)
1049
467
262
168
117
30o Beam Spread (Lens Tube at #8~#9)
Beam Diameter
1.62
2.43
3.25
4.05
4.86
5.68
6.49
Throw Distance
3.05
4.57
6.1
7.62
9.14
10.67
12.19
Central Illumination
Lux
Warm White (3,200K)
1160
517
290
186
129
95
73
Cool White (4,000K)
1617
720
404
259
180
132
101
Day Light (5,600K)
1995
889
499
320
222
163
125
20o Beam Spread (Lens Tube at #10)
Beam Diameter
1.11
1.66
2.21
2.77
3.32
3.87
4.42
4.98
5.53
Throw Distance
3.05
4.57
6.1
7.62
9.14
10.67
12.19
13.72
15.24
Central Illumination
Lux
Warm White (3,200K)
2407
1072
602
386
268
197
151
119
96
Cool White (4,000K)
3395
1512
849
544
378
277
213
168
136
Day Light (5,600K)
4046
1802
1011
648
451
331
253
200
162
Selecon LED Fixtures
PL House Light LED Luminaire
5.9 in. /
149.9 mm
3.5 in. /
88.9 mm
4.5 in. /
114.3 mm
6.5 in. /
165.1 mm
PL House Light LED Luminaire
(New Construction Models)
7.6 in. /
193.1 mm
4.3 in. /
109.2 mm
15.0 in. /
381.0 mm
12.0 in. /
304.8 mm
8.0 in. /
203.2 mm
5.9 in. /
149.9 mm
4.5 in. /
114.3 mm
6.5 in. /
165.1 mm
PL House Light LED Luminaire
(Retrofit Construction Models)
7.6 in. /
193.1 mm
4.3 in. /
109.2 mm
14.6 in. /
370.8 mm
12.0 in. /
304.8 mm
7.9 in. /
200.7 mm
Note: Power interconnect cable, between J-Box
and luminaire assembly removed for clarity.
4.5 in. /
114.3 mm
Selecon LED Fixtures
PL House Light LED Luminaire
120W LED Engine
LCD Display Menu System
J-Box (for electrical connections)
Trim Ring Mounting Assembly
Note: PLHLRC model shown. Basic
features are the same for all models.
Trim Ring / Reflector Assembly
Technical Specifications
Electrical Specifications
Source:
Output:
Operating Voltages:
Frequency:
Current Draw
Quiescent Load:
Ambient Temperature:
Control:
DMX512 Channels:
True RGBW 120W LED chip
> 2,000 lumens (white light)
120 Volts AC
50/60 Hz
1.25 Amps (150 Watts)
2.4 Watts
0° to 40°C
On-board menu / DMX512
15 Channels (16-Bit Mode)
9 Channels (8-Bit Mode)
3 Channels (3-Channel Mode)
Standards Compliance: ETL/cETL Listed and CE Marked (NON-IC
Rated)*
Mechanical Specifications
Construction:
Die cast aluminum and molded
engineering grade plastic components
Lenses:
Beam Spread:
Precision coated aspheric lenses
20o to 45o
*Note: PL House Light LED Luminaires are NON-IC (NON
Insulated Contact) Rated fixtures. If insulation is present in an
application where these fixtures are used, a minimum 3-inches of
clearance should exist on all sides of the fixture, and no insulation
may be present across the top of the installed fixture.
Selecon LED Fixtures
PL House Light LED Luminaire
Ordering Information
Cat No.
Description
PL House Light LED Luminaires
Accessories - Sloped Ceiling Adapters*
Retrofit Models (120V Markets)
PLHLSA5
PLHLRC
PLHLSA10
PLHLRB
PL House Light LED Luminaire for Retrofit
Installations, Clear (polished) Reflector
PL House Light LED Luminaire for Retrofit
Installations, Black Reflector
PLHLSA15
PLHLSA20
New Construction Models (120V Markets)
PLHLSA25
PLHLIC
PLHLIB
PL House Light LED Luminaire for New
Construction, Clear (polished) Reflector
PL House Light LED Luminaire for New
Construction, Black Reflector
PLHLSA30
PL House Light LED Luminaire 5o Slope
Adapter (Philips Lightolier# 7926-MC)
PL House Light LED Luminaire 10o Slope
Adapter (Philips Lightolier# 7926-MD)
PL House Light LED Luminaire 15o Slope
Adapter (Philips Lightolier# 7926-ME)
PL House Light LED Luminaire 20o Slope
Adapter (Philips Lightolier# 7926-MF)
PL House Light LED Luminaire 25o Slope
Adapter (Philips Lightolier# 7926-MG)
PL House Light LED Luminaire 30o Slope
Adapter (Philips Lightolier# 7926-MH)
Retrofit Models (230V Markets)
*Sloped ceiling adapters are for New Construction Models (PLHLIC
and PLHLIB) only.
PLHL230RC
Accessories - Luminaire DMX Cables
PLHL230RB
PL House Light LED Luminaire for Retrofit
Installations, Clear (polished) Reflector
PL House Light LED Luminaire for Retrofit
Installations, Black Reflector
PL1DMXFRJ45
PL1DMXFRJ46
New Construction Models (230V Markets)
PL1DMXMRJ47
PLHL230IC
PLHL230IB
PL House Light LED Luminaire for New
Construction, Clear (polished) Reflector
PL House Light LED Luminaire for New
Construction, Black Reflector
PL1DMXMRJ48
DMX512 cable XLR5 Female to RJ45 12
in. / 305 mm White
DMX512 cable XLR5 Female to RJ45 12
in. / 305 mm Black
DMX512 cable XLR5 Male to RJ45 12 in.
/ 305 mm White
DMX512 cable XLR5 Male to RJ45 12 in.
/ 305 mm Black
Accessories - Wireless DMX Receivers
PL1WDMX03
PL1LDMX03
PL1SDMX03
PLHLWL
Wireless Solutions Wireless DMX512
Receiver, Black**
Lumen Radio Wireless DMX512 Receiver,
Black**
City Theatrical DMX512 Receiver, Black**
PL House Light LED Luminaire Wireless
DMX Receiver Adapter Plate
**A PLHLWL adapter plate is required for all wireless DMX512
receivers (sold separately).
Selecon Lighting
Dallas
10911 Petal Street
Dallas, Texas 75238
Tel: (214) 647-7880
Fax: (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: (212) 213-8219
Fax: (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: +64 9 481 0100
Fax: +64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T. Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
021113NA_EUA
© Philips Group 2013
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31(0) 543-542516
Selecon LED Fixtures
PLPROFILE4 LED Luminaire
PLPROFILE4 LED Luminaire
The PLPROFILE4 luminaire is a LED, variable-beam profile with precise beam control and pattern projection from a high output
beam. An innovative combination of LED source technology and precision optical design, the PLPROFILE4 luminaire delivers Philips
Selecon’s industry benchmark projection quality in a compact, robust luminaire.
The PLPROFILE4 luminaire uses the same proven LED engine as the Philips Selecon PL3, PL1, PL Series 1 luminaire range ,and the
Philips VARI*LITE VLX wash luminaire ranges, meaning color matching is simplified across the stage. The user interface is the same
ensuring ease of use.
A key benefit of the PLPROFILE4 luminaire is that it is no longer necessary to change lamps or color filter. Combining the superior
control and light quality of a Philips Selecon Profile with seamless fading between colors allows designers a new level of creativity.
Less power consumption and no dimmer circuits makes the PLPROFILE4 luminaire the obvious choice for pattern projection and
stage washes on the larger stage.
Features
•
Four RGBW LED chips deliver limitless color mixing and
variable color temperature.
•
DMX512 Input/Output with 8 or 16-bit resolution or a
simple 3-channel control
•
Seven optical systems: 15°-35° and 25°-50° Zoomspots;
14°,19°, 26°, 36° and 50° Fixed Beams.
•
•
All lens tubes interchangeable and can be ordered
separately. 360° barrel rotation.
Wireless DMX512 option - compatible with Wireless
Solution W-DMX, Lumen Radio, or City Theatrical Show
DMX512 transmitters
•
•
Infinite color choice from the RGBW engines and
supporting color temperatures from 2300K to 9970K in
white
On-board LCD menu for ease of luminaire set up and
addressing
•
•
Homogenized fully mixed color output light, no multiple
color shadows
No ultra-violet (wavelengths of less than 400nm) – for
UVA, B or C or the Infrared spectrum (wavelengths of
more than 775nm)
•
Luminaire color: black
•
Ten’s of thousands of hours of life expectancy
•
Electronic universal power supply 100-240VAC
•
Quick selection of Warm White, Cool White, and Daylight
•
PowerCon In and Through connectors
•
Color presets simplifies matching existing light sources
•
Electronic power supply; cETLus listed and CE marked
•
User defined on board presets states available to record
your color composition
•
Constant color balance down to very low light levels
irrespective of intensity setting
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Selecon LED Fixtures
PLPROFILE4 LED Luminaire
2
1
PLPROFILE4 LED Luminaire
Advanced Control
The PLPROFILE4 LED luminaire has an on-board LCD menu system for
luminaire setup, control, and addressing. The menu system is extremely
user-friendly and offers all configuration options with a few button
presses.
Wireless DMX512 Control
Having trouble getting data to your light on set? All PLPROFILE4
luminaires support wireless DMX512 control for instant connections
without running control wiring. Each wireless receiver also has a DMX512
out port to control adjacent luminaires. Receivers are available for
Wireless Solution W-DMX, Lumen Radio, or City Theatrical DMX512
transmitters.
PLPROFILE4 Luminaire Advanced Control
1
LCD Menu Display
2
Local controls offer the ability to access preset color
temperatures; locally stored custom presets adjust intensity;
colors and motorized focus.
Console Control
All PLPROFILE4 luminaires support wired and wireless DMX512 control
with a choice of 8 or 16 bit control resolution or simple 3-channel control.
With the increased development of LED luminaires like PL1 and PL3 with
4 or more colors additional control is needed for intuitive operation. All
Strand Lighting Palette family controls support extended color control and
color temperature control to simplify programming and luminaire color
matching.
Strand Lighting Light Palette VL
PLPROFILE4 Luminaire LED Engine
The PLPROFILE4 luminaire’s powerful LED engines offer exceptional
performance and life. Under normal operating conditions our LED engine
has a potential life expectancy of up to 50,000 hours, however under
worst case operating conditions with the luminaire set to continuous full
output it is possible that a small percentage of LEDs may require
replacement sooner. The Philips Selecon three-year limited warranty
includes our guarantee against premature failure of the LED engine.
PLPROFILE4 Luminaire LED Engine
Selecon LED Fixtures
PLPROFILE4 LED Luminaire
Luminaire Dimensional Chart
Zoom
Fixed
Lens Tube Length
Dimensions
Luminaire Total Length
Angle (°)
14
19
26
36
50
15-35
Metric (mm)
400
310
270
250
200
370
Imperial (in)
15.7
12.2
10.6
9.8
7.9
14.6
Metric (mm)
835
745
705
685
635
805
Imperial (in)
32.9
29.3
27.7
27.0
25.0
31.7
25-50
280
11.0
715
28.1
Side View
Front View
16.9 in /
430 mm
12.9 in /
327.7 mm
9.8 in /
250 mm
16.3 in /
414.3 mm
R 9.1 in /
231.1 mm
LUMINAIRE - TOTAL LENGTH (SEE CHART)
Technical Specifications
Electrical Specifications
Mechanical Specifications
Source:
4 Each, True RGBW 120W LED chip
Construction:
Operating Voltages:
100 to 240 Volts AC (auto-ranging)
Machined aluminum, sheet metal, and
molded engineering grade plastic
components
Frequency:
50/60 Hz
Color:
Black
Current Draw:
6.0 Amps (100V) / 2.5 Amps (240V) Maximum load with all LEDs at full RGBW
Weight:
25.2 lbs / 11.5 kg (luminaire
engine/shutter/yoke assemblies only)
Maximum Thru (AC):
20 Amps at thru connector
Optical Specifications
Ambient Temperature:
0° to 40°C (32° to 104°F)
Output:
Control:
On-Board Menu / DMX512A
DMX512 Channels:
15 Channels (16-Bit Mode)
9 Channels (8-Bit Mode)
3 Channels (3-Channel Mode)
Standards Compliance: cETLus Listed and CE Marked
> 6,000 lumens (white light)
Selecon LED Fixtures
PLPROFILE4 LED Luminaire
Ordering Information
Cat No.
Description
PLPROFILE4 LED Luminaires
Accessories - Lens / Projection
PLPF4-03
20IRIS
SPXGHB
SPXGHGB
19PACCF
19PACSMFB
19SPXCF
SPX14LT
SPX19LT
SPX26LT
SPX36LT
SPX50LT
SPX1535LT
SPX2550LT
PLPROFILE4 LED Luminaire LED Engine Only, Black,
with C-Clamp, Top Box, Top Box Bolt, Safety Cable
and PowerCon AC Input Connector
PLPROFILE4 LED Luminaire LED Engine, Black,
with Axial Ellipsoidal 14o Fixed Beam Lens
(SPX14LT), C-Clamp, Top Box, Top Box Bolt, Safety
Cable and AC Input Cable (PC1XX*)
PLPROFILE4 LED Luminaire LED Engine, Black,
with Axial Ellipsoidal 19o Fixed Beam Lens
(SPX19LT), C-Clamp, Top Box, Top Box Bolt, Safety
Cable and AC Input Cable (PC1XX*)
PLPROFILE4 LED Luminaire LED Engine, Black,
with Axial Ellipsoidal 26o Fixed Beam Lens
(SPX26LT), C-Clamp, Top Box, Top Box Bolt, Safety
Cable and AC Input Cable (PC1XX*)
PLPROFILE4 LED Luminaire LED Engine, Black,
with Axial Ellipsoidal 36o Fixed Beam Lens
(SPX36LT), C-Clamp, Top Box, Top Box Bolt, Safety
Cable and AC Input Cable (PC1XX*)
PLPROFILE4 LED Luminaire LED Engine, Black,
with Axial Ellipsoidal 50o Fixed Beam Lens
(SPX50LT), C-Clamp, Top Box, Top Box Bolt, Safety
Cable and AC Input Cable (PC1XX*)
PLPROFILE4 LED Luminaire LED Engine, Black,
with Axial Ellipsoidal 15o to 35o Zoomspot Lens
(SPX1535LT), C-Clamp, Top Box, Top Box Bolt,
Safety Cable and AC Input Cable (PC1XX*)
PLPROFILE4 LED Luminaire LED Engine, Black,
with Axial Ellipsoidal 25o to 50o Zoomspot Lens
(SPX1535LT), C-Clamp, Top Box, Top Box Bolt,
Safety Cable and AC Input Cable (PC1XX*)
PLPF4-03-14
PLPF4-03-19
PLPF4-03-26
PLPF4-03-36
PLPF4-03-50
PLPF4-03-1535
PLPF4-03-2550
20-Leaf SPX Iris
SPX Gobo Holder, Size B, for Metal Gobos
SPX Gobo Holder, Size B, for Glass Gobos
SPX Color Frame, Spare
SPX Lens Safety, Mesh
SPX Replacement Color Frame, 6-1/4” Square, Black
SPX Axial Ellipsoidal 14o Fixed Beam Lens Tube Only
SPX Axial Ellipsoidal 19o Fixed Beam Lens Tube Only
SPX Axial Ellipsoidal 26o Fixed Beam Lens Tube Only
SPX Axial Ellipsoidal 36o Fixed Beam Lens Tube Only
SPX Axial Ellipsoidal 50o Fixed Beam Lens Tube Only
SPX Axial Ellipsoidal 15o to 35o Zoomspot Lens Tube Only
SPX Axial Ellipsoidal 25o to 50o Zoomspot Lens Tube Only
Accessories - AC Power Input Cables
PC1BE
PC1GP
PC1GTL
PC1GR
PL Series Luminaire AC Power Input Cable (39 inches /
1 meter), Powercon without AC connector (bare end)
PL Series Luminaire AC Power Input Cable (39 inches /
1 meter), Powercon with Stagepin Connector
PL Series Luminaire AC Power Input Cable (39 inches /
1 meter), Powercon with Twistlock Connector
PL Series Luminaire AC Power Input Cable (39 inches /
1 meter), Powercon with Edison Connector
Accessories - AC Interconnect Cables
PC3PC
PL Series Luminaire PowerCon Male to PowerCon
Female 2.5 Meter Cable for interconnection between
units
Accessories - Wireless DMX512 Receivers
*Specify AC input connector at time of ordering (GR - Edison / GP - Grounded
Stagepin / GTL - Twistlock).
PL1WDMX03
Accessories - Clamps
PL1LDMX03
PL1SDMX03
SC
MC
W-DMX Wireless DMX512 Receiver (Wireless Solutions)
Black
Lumen Radio Wireless DMX512 Receiver Black
City Theatrical Wireless DMX512 Receiver Black
Selecon Molded Yoke Rated C-Clamp
Mega Claw, Black Anodized
Accessories - Wireless DMX512 Transmitters
Accessories - Luminaire Software Uploader Cable
PLUPLD
USB Luminaire Software Programming Kit (for updating or
reloading luminaire software only) - includes USB to DMX
Dongle, Uploader Program, and Carry Bag
PL1WDMXTR
PL1LDMXTR
PL1SDMXTR
W-DMX Wireless DMX512 Transmitter
Lumen Radio Wireless DMX512 Transmitter
City Theatrical Wireless DMX512 Base Transmitter
Selecon Lighting
Dallas
10911 Petal Street
Dallas, Texas 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: +1 (212) 213-8219
Fax: +1 (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: +64 9 481 0100
Fax: +64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T. Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
030113_NA_EUA
© Philips Group 2013
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
Selecon LED Fixtures
PLPROFILE1 LED Luminaire
The PLPROFILE1 LED luminaire is a variable beam profile with precise beam
control and pattern projection from a high output beam. An innovative
combination of LED source technology and precision optical design, the
PLPROFILE1 luminaire delivers Philips Selecon’s industry benchmark
projection quality in a compact, robust fixture.
A key benefit of the PLPROFILE1 luminaire is that it is no longer necessary to
change lamps or color filter. Combining the superior control and light quality
of a Philips Selecon Profile with seamless fading between colors allows
designers a new level of creativity. Less power consumption and no dimmer
circuits makes the PLPROFILE1 luminaire the obvious choice for pattern
projection and stage washes.
PLPROFILE1 LED Luminaire
Features
•
Delivers the performance of a 500 watt profile fixture with
a maximum power consumption of 150 watts
•
Constant color balance down to very low light levels
irrespective of intensity setting
•
Available in 18 to 34 or 24 to 44 degree beam angles
•
•
Interchangeable lens tray between medium and wide
versions
DMX512 Input/Output with 8 or 16-bit resolution or a
simple 3-channel control
•
•
Slot provided for iris, M-size pattern holder, or third party
effect accessory
On-board LCD menu for ease of luminaire set up and
addressing
•
•
Infinite color choice from the RGBW engine and
supporting color temperatures from 2700K to 5600K in
white
No ultra-violet (wavelengths of less than 400nm) – for
UVA, B or C or the Infrared spectrum (wavelengths of
more than 775nm)
•
Luminaire color: black
•
Electronic universal power supply 100-240VAC
•
PowerCon In and Through connectors
•
Electronic power supply; ETL / cETL approved and CE
marked
•
Homogenized fully mixed color output light, no multiple
color shadows
•
Ten’s of thousands of hours of life expectancy
•
Quick selection of Warm White, Cool White, and Daylight
•
User defined on board presets states available to record
your color composition
•
Color presets simplifies matching existing light sources
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Selecon LED Fixtures
PLPROFILE1 LED Luminaire
1
PLPROFILE1 LED Luminaire
2
Advanced Control
The PLPROFILE1 LED luminaire has an on-board LCD menu system for
luminaire setup, control, and addressing. The menu system is extremely
user-friendly and offers all configuration options with a few button
presses.
Console Control
All PLPROFILE1 luminaires support DMX512 control with a choice of 8 or
16 bit control resolution or simple 3-channel control. With the increased
development of LED luminaires like PL1 and PLPROFILE1 with 4 or more
colors additional control is needed for intuitive operation. All Strand
Lighting Palette family controls now support extended color control and
color temperature control to simplify programming and luminaire color
matching.
PLPROFILE1 Luminaire Advanced Control
1
LCD Menu Display
2
Local controls offer the ability to access preset color
temperatures; locally stored custom presets adjust intensity;
colors and motorized focus.
PLPROFILE1 LED Engine
The PLPROFILE1 luminaire’s powerful LED engines offer exceptional
performance and life. Under normal operating conditions our LED engine
has a potential life expectancy of up to 50,000 hours, however under
worst case operating conditions with the luminaire set to continuous full
output it is possible that a small percentage of LEDs may require
replacement sooner. The Philips Selecon three-year limited warranty
includes our guarantee against premature failure of the LED engine.
Strand Lighting Light Palette VL
The PLPROFILE1 luminaire uses the same proven LED engine as the
Philips Selecon PL3, PL1, PLCYC1, PLFRESNEL1 and the Philips Vari-Lite
VLX luminaires meaning the color experience is simplified across the
stage.
Interchangeable lens trays for fast
and easy choice of either medium
zoom (18-34 degrees) or wide zoom
(24-44 degrees) without the use of
tools. Lens trays sold separately.
PLPROFILE1 Luminaire LED Engine
Selecon LED Fixtures
PLPROFILE1 LED Luminaire
Technical Specifications
Electrical Specifications
Mechanical Specifications
Source:
1 Each, True RGBW 120W LED chip
Construction:
Operating Voltages:
120 to 240 Volts AC (auto-ranging)
Machined aluminum, sheet metal, and
molded engineering grade plastic
components
Frequency:
50/60 Hz
Color:
Black
Current Draw:
1.3 Amps (115V) / 0.65 Amps (230V) Maximum load with all LEDs at full RGBW
Weight:
18.7 lbs / 8.5 kg (luminaire only)
Power Consumption:
150 Watts (max., RGBW at 100%)
Ambient Temperature:
0° to 40°C (32° to 104°F)
Control:
On-Board Menu / DMX512
DMX512 Channels:
15 Channels (16-Bit Mode)
9 Channels (8-Bit Mode)
3 Channels (3-Channel Mode)
Optical Specifications
Output:
> 2,000 lumens (white light)
Beam Angle:
18-34 Degrees or 24-44 Degrees (depends
on lens option purchased)
Standards Compliance: ETL/cETL Listed and CE Marked
Dimensions
Side View
Front View
664.9 mm / 26.2 in.
310.0 mm / 12.2 in.
249.8 mm / 9.8 in.
404.8 mm / 15.9 in.
173.0 mm / 6.8 in.
Selecon LED Fixtures
PLPROFILE1 LED Luminaire
Infinite color choices from the RGBW engine and
supporting color temperatures from 2700K to
5600K in white.
Ordering Information
Cat No.
Description
PLPROFILE1 LED Luminaires
Accessories - AC Power Input Cables
PLZS1-1834-03 PLPROFILE1 LED Luminaire, 18-34 Degree
Zoomspot, Black, with SC C-Clamp, Safety Cable,
and AC Input Cable*
PC1BE
PC1GP
PLZS1-2444-03 PLPROFILE1 LED Luminaire, 24-44 Degree
Zoomspot, Black, with SC C-Clamp, Safety Cable,
and AC Input Cable*
PC1GTL
*Specify AC input connector at time of ordering (GR - Edison / GP - Grounded
Stagepin / GTL - Twistlock).
PC1GR
PLPROFILE1 Luminaire AC Power Input Cable (39
inches / 1 meter), Powercon without AC connector
(bare end)
PLPROFILE1 Luminaire AC Power Input Cable (39
inches / 1 meter), Powercon with Stagepin
Connector
PLPROFILE1 Luminaire AC Power Input Cable (39
inches / 1 meter), Powercon with Twistlock
Connector
PLPROFILE1 Luminaire AC Power Input Cable (39
inches / 1 meter), Powercon with Edison Connector
Accessories - Zoomspot Lenses
Accessories - AC Interconnect Cables
15ACAX1834LT Acclaim Axial Zoomspot 18-34 Degrees Lens Tray,
Black
15ACAX2444LT Acclaim Axial Zoomspot 24-44 Degrees Lens Tray,
Black
PC3PC
PLPROFILE1 Luminaire PowerCon Male to PowerCon
Female 2.5 Meter Cable for interconnection between
units
Accessories - Clamps
Accessories - Luminaire Software Uploader Cable
SC
MC
Selecon Molded Yoke Rated C-Clamp
Mega Claw, Black Anodized
PLUPLD
Accessories - Top Box Assembly
PLICB
USB Luminaire Software Programming Kit (for
updating or reloading luminaire software only) includes USB to DMX Dongle, Uploader Program,
and Carry Bag
Spare Top Box (Interconnect) Assembly
Philips Selecon
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: +1 (212) 213-8219
Fax: +1 (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
021113_NA_EUA
www.seleconlight.com
© Philips Group 2013
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
Selecon LED Fixtures
PLFRESNEL1 LED Luminaire
The PLFRESNEL1 LED Luminaire is a general purpose lighting fixture for
theatre, small studio, and display lighting applications. It produces an
adjustable cone of light with a soft edge which is easily blended with
adjacent beams to provide even illumination. Using LED source
technology combined with a traditional Fresnel lens, the PLFRESNEL1
LED Luminaire delivers Philips Selecon’s industry benchmark quality
without the compromising performance of spreader lenses.
PLFRESNEL1 LED Luminaire
A key benefit of the PLFRESNEL1 LED Luminaire is that it is no longer
necessary to change lamps or color filters. Combining the superior
control and light quality of a Philips Selecon Fresnel with seamless
fading between colors allows designers a new level of creativity. Less
power consumption and no dimmer circuits makes the PLFRESNEL1
LED Luminaire the obvious choice for any stage lighting need.
Features
•
Delivers the performance of a 500 watt fresnel fixture with
a maximum power consumption of 150 watts
•
On-board LCD menu for ease of luminaire set up and
addressing
•
Variable beam angle from 15 to 54 degrees
•
•
Infinite color choice from the RGBW engine and
supporting color temperatures from 2700K to 5600K in
white
No ultra-violet (wavelengths of less than 400nm) – for
UVA, B or C or the Infrared spectrum (wavelengths of
more than 775nm)
•
Luminaire color: black
•
Electronic universal power supply 100-240VAC
•
PowerCon In and Through connectors
•
Electronic power supply; ETL / cETL approved and CE
marked
•
Homogenized fully mixed color output light, no multiple
color shadows
•
Ten’s of thousands of hours of life expectancy
•
Quick selection of Warm White, Cool White, and Daylight
•
User defined on board presets states available to record
your color composition
•
Color presets simplifies matching existing light sources
•
Constant color balance down to very low light levels
irrespective of intensity setting
•
DMX512 Input/Output with 8 or 16-bit resolution or a
simple 3-channel control
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Selecon LED Fixtures
PLFRESNEL1 LED Luminaire
PLFRESNEL1 LED Luminaire
1
2
Advanced Control
The PLFRESNEL1 LED luminaire has an on-board LCD menu system for
luminaire setup, control, and addressing. The menu system is extremely
user-friendly and offers all configuration options with a few button
presses.
Console Control
PLFRESNEL1 Luminaire Advanced Control
1
LCD Menu Display
2
Local controls offer the ability to access preset color
temperatures; locally stored custom presets adjust intensity;
colors and motorized focus.
All PLFRESNEL1 luminaires support DMX512 control with a choice of 8 or
16 bit control resolution or simple 3-channel control. With the increased
development of LED luminaires like PL1 and PLPROFILE1 with 4 or more
colors additional control is needed for intuitive operation. All Strand
Lighting Palette family controls now support extended color control and
color temperature control to simplify programming and luminaire color
matching.
PLFRESNEL1 LED Engine
The PLFRESNEL1 luminaire’s powerful LED engines offer exceptional
performance and life. Under normal operating conditions our LED engine
has a potential life expectancy of up to 50,000 hours, however under
worst case operating conditions with the luminaire set to continuous full
output it is possible that a small percentage of LEDs may require
replacement sooner. The Philips Selecon three-year limited warranty
includes our guarantee against premature failure of the LED engine.
Strand Lighting Light Palette VL
The PLFRESNEL1 luminaire uses the same proven LED engine as the
Philips Selecon PL3, PL1, PLCYC1, PLPROFILE1 and the Philips Vari-Lite
VLX luminaires meaning the color experience is simplified across the
stage.
PLFRESNEL1 Luminaire LED Engine
Selecon LED Fixtures
PLFRESNEL1 LED Luminaire
Technical Specifications
Electrical Specifications
Mechanical Specifications
Source:
1 Each, True RGBW 120W LED chip
Construction:
Operating Voltages:
120 to 240 Volts AC (auto-ranging)
Machined aluminum, sheet metal, and
molded engineering grade plastic
components
Frequency:
50/60 Hz
Color:
Black
Current Draw:
1.3 Amps (115V) / 0.65 Amps (230V) Maximum load with all LEDs at full RGBW
Weight:
12.3 lbs / 5.6 kg (luminaire only)
Power Consumption:
150 Watts (max., RGBW at 100%)
Ambient Temperature:
0° to 40°C (32° to 104°F)
Control:
On-Board Menu / DMX512
DMX512 Channels:
15 Channels (16-Bit Mode)
9 Channels (8-Bit Mode)
3 Channels (3-Channel Mode)
Optical Specifications
Output:
> 2,000 lumens (white light)
Beam Angle:
15 to 54 Degrees (user adjustable)
Standards Compliance: ETL/cETL Listed and CE Marked
Dimensions
Side View
Front View
444.8 mm / 17.5 in.
208.3 mm / 8.2 in.
249.6 mm /
9.8 in.
341.9 mm /
13.5 in.
Selecon LED Fixtures
PLFRESNEL1 LED Luminaire
Infinite color choices from the RGBW engine and
supporting color temperatures from 2700K to
5600K in white.
Note, unit shown with optional barndoor accessory.
Ordering Information
Cat No.
Description
PLFRESNEL1 LED Luminaires
Accessories - AC Power Input Cables
PLFR1-03
PC1BE
PLFRESNEL1 LED Luminaire, 15-54 Degree
Fresnel, Black, with Top Box (Interconnect)
Assembly, SC C-Clamp, Safety Cable, and AC Input
Cable*
*Specify AC input connector at time of ordering (GR - Edison / GP - Grounded
Stagepin / GTL - Twistlock).
PC1GP
PC1GTL
Accessories - Barndoors
PC1GR
20BDMF
Acclaim Fresnel Barndoor, 4-Way, Black
PLFRESNEL1 Luminaire AC Power Input Cable (39
inches / 1 meter), Powercon without AC connector
(bare end)
PLFRESNEL1 Luminaire AC Power Input Cable (39
inches / 1 meter), Powercon with Stagepin
Connector
PLFRESNEL1 Luminaire AC Power Input Cable (39
inches / 1 meter), Powercon with Twistlock
Connector
PLFRESNEL1 Luminaire AC Power Input Cable (39
inches / 1 meter), Powercon with Edison Connector
Accessories - Clamps
Accessories - AC Interconnect Cables
SC
MC
PC3PC
Selecon Molded Yoke Rated C-Clamp
Mega Claw, Black Anodized
PLFRESNEL1 Luminaire PowerCon Male to
PowerCon Female 2.5 Meter Cable for
interconnection between units
Accessories - Top Box Assembly
PLICB
Spare Top Box (Interconnect) Assembly
Accessories - Luminaire Software Uploader Cable
PLUPLD
USB Luminaire Software Programming Kit (for
updating or reloading luminaire software only) includes USB to DMX Dongle, Uploader Program,
and Carry Bag
Philips Selecon
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: +1 (212) 213-8219
Fax: +1 (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
021113_NA_EUA
www.seleconlight.com
© Philips Group 2013
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
Selecon LED Fixtures
PL3 LED Luminaire
A revolutionary breakthrough in stage and studio lighting the PL3 LED
Luminaire delivers full control of the beam color composition irrespective of
intensity.
Drawing on technology and specific insight, nurtured and developed, within
the Philips Entertainment group the PL3 meets the everyday challenges of
illuminating the world’s stages and studios. A lighting instrument that
extends the creative possibilities with light while significantly reducing the
impact of our activities on the environment.
PL3 LED Luminaire
Features
•
Infinite color choice from the three RGBW engines,
supporting color temperatures from 2300K to 9970K
Wireless DMX512 options - compatible with Wireless
Solution W-DMX, Lumen Radio, or City Theatrical
DMX512 transmitters
•
Variable beam angle from a 15 degree spot to a 55
degree flood angle - flood angle can be shaped using the
four or eight door barndoor accessory
Motorized Zoom to adjust beam angle - at menu system
or via DMX512 control
•
On-board LCD menu for ease of luminaire set up and
addressing
•
No ultra-violet (wavelengths of less than 400nm) - for
UVA, B or C or the Infrared spectrum (wavelengths of
more than 775nm)
•
Luminaire colors: black or white
•
Electronic power supply; ETL / cETL approved and CE
marked
•
High output RGBW LED luminaire delivering the output of
a 1000/1200-watt Fresnel
•
•
•
Homogenized fully mixed "white" light, no multiple color
shadows
•
25,000 hour life before degradation in light output and
quality is expected
•
Quick selection of Warm White, Cool White, and Daylight
color presets simplifies matching existing light sources
•
User defined on board presets states available to
record your color composition
•
Constant color balance down to very low light levels
irrespective of intensity setting
•
DMX512 input with 8 or 16-bit resolution
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Selecon LED Fixtures
PL3 LED Luminaire
PL3 LED Luminaire
Advanced Control
PL3 Luminaire Advanced Control
The PL3 LED luminaire has an on-board LCD menu system for luminaire
setup, control, and addressing. The menu system is extremely
user-friendly and offers all configuration options with a few button
presses.
Wireless DMX512 Control
1
2
Working on location? Having trouble getting data to your light on set? All
PL3 luminaires support wireless DMX512 control for instant connections
without running control wiring. Each wireless receiver also has a DMX512
out port to control adjacent luminaires. Receivers are available for
Wireless Solution W-DMX, Lumen Radio or City Theatrical transmitters.
1
LCD Menu Display
2
Local controls offer the ability to access preset color
temperatures; locally stored custom presets adjust intensity;
colors and motorized focus.
Console Control
All PL3 luminaires support wired and wireless DMX512 control with a
choice of 8 or 16 bit control resolution. With the increased development
of LED luminaires like PL1 and PL3 with 4 or more colors additional
control is needed for intuitive operation. All Strand Lighting Palette family
controls support extended color control and color temperature control to
simplify programming and luminaire color matching.
Strand Lighting Light Palette VL
Selecon LED Fixtures
PL3 LED Luminaire
PL3 LED Luminaire
Lighting for Designers with...
•
An adjustable beam 15 to 55 degrees
•
Barndoors or snoot provide beam control
•
Absolute color control
•
Precise intensity control
•
Homogeneous beam free of multi colored shadows
The PL3 LED luminaire extends the creative opportunities of lighting design
to tell a story, command attention, and direct emotion.
PL3 LED Luminaire shown with
Barndoor Option
Lighting for Every Need
The PL3 luminaire delivers color balanced whites for stage, television, and film production along with beautiful colors to meet the
needs of lighting directors and designers everywhere. The long life of the LED engines, reduces maintenance cost dramatically and
with the energy savings PL3 delivers; users will quickly see the total cost of ownership benefits.
PL3 LED luminaire at Daylight and
Warm White settings
PL3 LED Engine
PL3’s powerful LED engines offer exceptional performance and life. Under normal operating conditions our LED engine has a life
expectancy in excess of 25,000 hours, however under worst case operating conditions with the luminaire set to continuous full
output it is possible that a small percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited
warranty includes our guarantee against premature failure of the LED engine.
Selecon LED Fixtures
PL3 LED Luminaire
Photometrics (preliminary)
PL3 - Wide (56o Field Angle)
Meters
Feet
Throw Distance
2.0
4.0
6.0
8.0
6.0
12.0
18.0
24.0
Beam Diameter
2.1
4.2
6.4
8.5
6.4
12.7
19.1
25.5
Wattage*
Central Illumination (Lux)
Wattage
Central Illumination (Footcandles)
Warm White
148
2327
582
259
145
148
223
56
25
14
Cool White
205
2962
741
329
185
205
284
71
32
18
Daylight
246
3396
849
377
212
246
326
81
36
20
Blue
78
179
45
20
11
78
17
4
2
1
Red
70
683
171
76
43
70
65
16
7
4
Green
136
1951
488
217
122
136
187
47
21
12
PL3 - Narrow (15o Field Angle)
Meters
Feet
Throw Distance
4.0
8.0
12.0
16.0
12.0
24.0
36.0
50.0
Beam Diameter
1.0
2.1
3.1
4.1
3.1
6.2
9.3
13.0
Wattage*
Central Illumination (Lux)
Wattage
Central Illumination (Footcandles)
Warm White
148
8140
2035
904
509
148
781
195
87
45
Cool White
205
10501
2625
1167
656
205
1007
252
112
58
Daylight
246
12068
3017
1341
754
246
1157
289
129
67
Blue
78
659
165
73
41
78
63
16
7
4
Red
70
2326
582
258
145
70
223
56
25
13
Green
136
6923
1731
769
433
136
664
166
74
38
Note: *Wattage refers to total power consumed at the recorded preset LED levels.
Selecon LED Fixtures
PL3 LED Luminaire
Technical Specifications
Electrical Specifications
Mechanical Specifications
Source:
Output:
Operating Voltages:
Frequency:
Current Draw
Construction:
Machined aluminum, sheet metal, and
molded engineering grade plastic
components
Colors:
Black or White
Weight:
22.1 lbs / 10.1 kg (luminaire only)
Lenses:
Precision coated aspheric lenses
3 Each, True RGBW 120W LED chips
> 6,000 lumens (white light)
120 to 240 Volts AC (auto-ranging)
50/60 Hz
4.60 Amps (120V) / 2.35 Amps (240V) Maximum load with all LEDs at full RGBW
Ambient Temperature: 0° to 50°C (32° to 122°F)
Control:
On-board menu / DMX512 / Infrared
Remote Control
DMX512 Channels:
18 (16-Bit Mode)
12 (8-Bit Mode)
3 (3-Channel Mode)
Standards Compliance: ETL/cETL Listed and CE Marked
Dimensions
9.75 in /
247.7 mm
18.7 in /
475.0 mm
12.2 in /
310.0 mm
13.5 in /
343.0 mm
12.4 in /
315.0 mm
6.6 in /
167.6 mm
11.2 in /
284.5 mm
14.1 in /
358.1 mm
16.4 in /
416.6 mm
AC Input
DMX Out / Thru
DMX In
Selecon LED Fixtures
PL3 LED Luminaire
PL3 LED Luminaire shown with
Accessory Holder Option
Ordering Information
Cat No.
Description
PL3 LED Luminaire
Accessories - AC Power Input Cables
PL3
PL3W
Spare Power Input Cables
PL3 LED Luminaire, Black
PL3 LED Luminaire, White
PL3BE
Accessories - Barndoors & Holders
PL3ACH
20BDSF2020
20BDSF20208
20CFSF2020
PL3 LED Luminaire Accessory Holder
Barndoor, Black
Barndoor, 8 Way, Black
Spare Color Frame
PC1GP
PC1GTL
PC1GR
Accessories - Clamps (1)
SC
MC
Selecon Molded Yoke Rated C-Clamp
Mega Claw, Black Anodized
PL3 Luminaire AC Power Input Cable (39 inches / 1
meter), Powercon with no connector (bare end user to supply connector)
PL3 Luminaire AC Power Input Cable (39 inches / 1
meter), Powercon with Stagepin Connector
PL3 Luminaire AC Power Input Cable (39 inches / 1
meter), Powercon with Twistlock Connector
PL3 Luminaire AC Power Input Cable (39 inches / 1
meter), Powercon with Edison Connector
Accessories - Wireless DMX Receivers
Accessories - Connectors (2)
PL1WDMX03
PL1LDMX03
PL1SDMX03
GR
GP
GTL
Accessories - Wireless DMX Transmitters
15A NEMA 5-15P Male Edison
20A, Male Stage Pin
20A, NEMA L5-20P Male Twist-Lock
PL1WDMXTR
PL1LDMXTR
PL1SDMXTR
Notes:
(1)
Do Not install the PL3 LED Luminaire using C-Clamp (82019 or
USCLAMP). This Luminaire requires the longer bolt utilized in clamps
Molded Yoke Rated C-Clamp (SC) or Mega Claw (MC).
(2)
All PL3 luminaires ship with a "bare-end" 39 inch/1 meter power
input cable. Add -GR, -GP, or -GTL to the part number to have a
connector installed. All other accessories sold separately.
W-DMX Wireless DMX512 Receiver, Black
Lumen Radio Wireless DMX512 Receiver, Black
City Theatrical Wireless DMX512 Receiver, Black
W-DMX Wireless DMX512 Transmitter
Lumen Radio Wireless DMX512 Transmitter
City Theatrical Wireless DMX512 Transmitter
Selecon Lighting
Dallas
10911 Petal Street
Dallas, Texas 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: +1 (212) 213-8219
Fax: +1 (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: +64 9 481 0100
Fax: +64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T. Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
073112NA
© Philips Group 2012
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
For further information on the PL3 including the
Operation manual please visit the Philips Selecon
web site at: www.seleconlight.com/pl3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement