Acu-Rite Thermostat 00380W User's Manual

Acu-Rite Thermostat 00380W User's Manual
 Please DO NOT return product to the retail store.
=> For technical assistance and product return information, please call
dia Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:30 P.M. (CST) DESIGNED TO WORK FOR YOU" model +00380W
www.chaneyinstrument.com
LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be
free of defects if properly installed and operated for a period of one year from date of purchase. REMEDY FOR BREACH OF
THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Any product which, under
normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon
examination by Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and
charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such
transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it
manufactures which shall have received normal wear and tear, been damaged, tampered, abused, improperly installed,
damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.
ACURITE. Wireless Thermometer
Package Contents:
(1) Display Unit (A)
(1) Wireless Sensor (B)
4 ”D,
i (1) Instruction Manual
THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL a
OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY PTT
OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. CHANEY EXPRESSLY low 35" G7 bin What You Need:
DISCLAIMS ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, WHETHER ARISING IN TORT OR — e (2) AA batteries
BY CONTRACT FROM ANY BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR N 4 .
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT . . . ° (2) AAA batteries
APPLY TO YOU. CHANEY FURTHER DISCLAIMS ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO B. Wireless Sensor A. Display Unit
THE EXTENT PERMITTED BY LAW. BY ACCEPTANCE OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER
ASSUMES ALL LIABILITY FOR THE CONSEQUENCES ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR
CORPORATION 15 AUTHORIZED TO ASSUME FOR CHANEY ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF Thank You for purchasing this ACURITE® product. Please read this manual in it's
ITS PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE THE . Full ; he benefi de Fthi d PI k hi
TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN WRITING AND SIGNED BY A DULY entirety to fully enjoy the benefits and reatures or this product. Flease keep this
AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE manual for futu re reference.
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Chaney Customer Care oq. .
For in-warranty repair, please contact: 877-221-1252 NOTE: A clear film IS applied to the LCD at the factory that must be removed
Customer Care Department Mon-Fri 8:00 a.m. to 4:30 p.m. CST prior to using this product. Locate the clear tab on the left side of the display
Chaney Instrument Company d . | | +
965 Wells Street and simply peel 10 remove.
Lake Geneva, WI 53147 www.chaneyinstrument.com
- ) This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
1- This device may NOT cause harmful interference, and
C 2- This device must accept any interference received, including Ind Outd
interference that may cause undesired operation. ndoor/Outdoor
Selection Button
\ J NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are Indoor
designed to provide reasonable protection against harmful interference in a residential installation. Temperature
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used or
in accordance with the instructions, may cause harmful interference to radio communications. Outdoor
However, There is no guarantee that interference will not occur in a particular installation. If this Temperature
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
e Reorient or relocate the receiving antenna. L
e Increase the separation between the equipment and the receiver. Е Red
* Connect the equipment into an outlet on a circuit different from that to which the asy-to- “la
receiver is connected. Display
* Consult the dealer or an experienced radio/TV technician for help. Fahrenheit or
Celsius Display
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the
equipment. Daily High &
Patent numbers: 5,978,738; 6,076,044; 6,597,990 | Low Temperature
ACURITE® is a registered trademark of the Chaney Instrument Co. (clears every rs)
00380W INST 101410 Lake Geneva, WI
SETUP
Battery Choice & Temperature Range
Extended periods of cold temperatures ( below -4°F / -20°C ) can cause
alkaline batteries to function improperly. This will cause the outdoor
wireless sensor to stop transmitting temperature readings. Use lithium
batteries in these low temperature conditions to ensure continued operation
for wireless sensors placed outdoors. NOTE: Rechargeable batteries are
not recommended due to higher operating voltages.
di BV. ToL (10%) 0%) 1580F |
ALKALINE = 40 | о
BATTERIES 40°F (20°C) (70%) 158 F |
aq PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY
SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove battteries from
equipment which is not to be used for an extended perid of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead
batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT
incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries
(alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
Installing Batteries - Wireless Sensor
Remove the battery =
compartment cover. ей
Install 2 fresh “AA” m
batteries as shown here. e —
|
\
\ Е
fes Y
BATTERIES MUST BE | pa
INSTALLED FOR THE |
SENSOR TO OPERATE |
LA
E
Le
zZ +
Installing Batteries - Display Unit
REMOVE
Remove the battery BATTERY
compartment cover. COMPARTMENT
Install 2 fresh
“AAA” battery as
shown here.
©
INSTALL 2 “AAA”
BATTERY
Now that setup is complete, you must choose a location to place the
wireless sensor and the main display. The wireless sensor MUST be placed
less than 165 feet (50 m) away from the main display.
This wireless thermometer uses radio frequency for communication, which is
susceptible to interference from other electronic devices and large metallic
items or thick walls. Always place both units at least 3 feet (.91 m) away
from appliances ( TV, microwave, radios, etc. ) or objects ( large metal
surfaces, thick stone walls, etc. ) that may interfere with the wireless
communication.
(1;
165 Feet Maximum
(50 meters)
Placement of Display Console
Place the display console in a dry area free of dirt and dust. To
help ensure an accurate indoor temperature measurement, be
sure to place the display console out of direct sunlight, and away
from any heat sources or vents in your home. There are 2
placement options for the display console. You may hang the
main unit on a wall using the integrated hang hole. Alternatively,
you may place the main unit on a table top or other flat surface
using the integrated table top display stand.
Placement of Sensor
The wireless sensor MUST BE PLACED OUTDOORS to observe
outdoor temperature and humidity. The wireless sensor must be
placed less than 165 feet (50 m) from the main unit.
The wireless sensor is water resistant and is designed for
general outdoor use. However, to extend the life of the product,
place the wireless sensor in an area protected from direct
weather elements. To ensure an accurate outdoor temperature
measurement, be sure the wireless sensor is placed out of direct
- | sunlight and away from any heat sources.
There are 2 placement options for the wireless sensor. You may
hang the it on a wall using one of the two integrated hang holes,
or use string (not included) to hang it from a suitable location like
a well covered tree branch.
3
TROUBLESHOOTING
(no temperature reading)
Low 35 5 hig "|
№
* Make certain that the batteries are installed
correctly into the wireless sensor. The wireless
sensor batteries may need replacing.
* Relocate the display unit and/or the
wireless sensor. Both units must be within 165
feet from each other.
* Make sure both units are placed at least 3
feet from other electronic appliances and
devices that may interfere with the wireless
communication (such as TV's, microwaves,
radios, computers etc).
* Make certain there are no large metallic
surfaces or very thick stone walls or surfaces
between the wireless sensor and the main unit.
* Metal screens or LOW-E windows may
interfere with the wireless communication.
* In some cases, relocating AND resetting the
display unit and wireless sensors (removing
and re-installing batteries) may be necessary.
NOTE: It may take up to 20 minutes for the
display unit to re-synchronize with the sensor
when batteries are replaced. Use lithium
batteries in sensor when temperature is below
-4°F.
Display Unit
Screen Not Working
Make certain that the batteries are installed
correctly.
The batteries may need to be replaced.
Please DO NOT return product to the retail store.
=D For technical assistance and product return information, please call
di | Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:30 PM. (CST)
www.chaneyinstrument.com
4
SPECIFICATIONS
Product Facts
Batteries: 2 Xx “AAA” (not included)
Batteries: 2 x “AA” (not included)
Lithium Batteries Recommended in
Outdoor Sensor (AA batteries)
If temperatures are below -4°F
о]
Measurement Ranges
Outdoor Temperature: -40°F to 158°F
-40°C to 70°C
Indoor Temperature: 32°F to 122°F
0°C to 50°C
Wireless Range: 165 ft/ 50m MAX
Depending on home construction materials
7]
MADE IN CHINA
HECHO EN CHINA
Limited One
Year Warranty
Instructions &
Warranty Enclosed
Customer Care:
877-221-1252
www.chaneyinstrument.com
-
Patent numbers: 5,978,738; 6,076,044; 6,597,990
ACURITE® is a registered trademark of the Chaney Instrument Co.
Lake Geneva, WI
PRODUCT REGISTRATION
To receive product updates
and information,
Log on to
www.chaneyinstrument.com
т
| Search keyword or item | ©
| SUPPORT ABOUT US Y
Product Documentation
Frequently Asked Questions
(FAQ)
Troubleshooting
Product Registration
CONTACT US ”
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement