Digital Media Gateway
Digital Media Gateway
DMG 3200
SWITCH
IPIO Contr ol
S tatus
DMG 3200
S ync I n
Data A
Data B
Control
HI -DENSITY
MODULAR
HOT- SWAP
The DMG 3200 is a feature-rich gateway product
for a seemingly endless array of applications;
ranging from digital turnaround, to modulation,
descrambling, scrambling and even multiplexing.
Dual form factors and modular architecture make
it ideally suited to meet each customer’s unique
system needs.
An intuitive web GUI provides ease of management
and complete control over all unit functionality,
as well as extensive status of all input and output
signals.
Detailed alarming and management
protocols, such as SOAP and SNMP, allow the
DMG 3200 to be remotely managed or seamlessly
integrated into existing management platforms.
KEY FEATURES
• 1RU and 4RU chassis
• Gbit/s IP (electrical or optical), ASI, DVB-S/S2, DVB-T/2,
8VSB and DVB-C inputs
• Any combination of inputs in the same chassis.
Maximum:
- 64 ASI
- 32 DVB-S/S2, DVB-T/T2, DVB-C, 8VSB
• Gbit/s IP (electrical or optical), ASI, COFDM, DVB-T/
T2 Terrestrial, DVB T/T2 Cable, and DVB-T/T2 Gateway,
DVB-S/S2 outputs supporting MPTS and SPTS
• Multiplexing
• PSI/SI regeneration
• PSI/SI/PSIP input analysis
• Up to 32 DVB-CI slots for DVB descrambling
APPLICATIONS
• Central Head-end
The ideal solution for deployments requiring aggregation
of services from multiple sources, service processing and
preparation for QAM broadcast over cable networks.
• Remote Head-end
With IP, 8VSB, ASI or DVB-T/T2 input sources, powerful
edge processing capabilities, high density QAM output
alongside Sencore’s receiver/decoder products options,
operators can deliver all broadcast services.
•Contribution
High throughput ASI feeds, multiplexing functionality,
and an easy to use user interface make dynamic service
adjustments possible.
• Regional Adaptation
For insertion of local programming at regional broadcast
locations. Transparent mode enables direct transport
stream forwarding for network conversion applications.
• Support for DVB-CA and AES bulk descrambling.
Intergrates with Verimatrix and Latens
• Support DVB and AES scrambling, simulcrypt interface
based
• Intuitive web-based user control
• Dual redundant hot-swappable power supplies
• Monitoring of power and fans
• SNMP Alarm MIB
• SOAP/XML Interface for external control
SPECIFICATIONS
Digital Media Gateway DMG 3200
SWITCH MODULE SPECIFICATIONS
SWITCH MODULE
INPUT INTERFACE SPECIFICATIONS
IP INPUT
Bitrate:
Placement:
Interface:
Maximum data rate:
Data format:
Transport stream:
Network de-jittering
using PCR:
FEC (SMPTE 2022-1):
IP Input/Output
Interface:
Maximum data rate
per port:
Maximum number of
services per port:
Data format:
Transport stream:
Service filtering:
Video format:
IP Input
IP de-jittering:
Forward Error Correction:
IP Output
Multiplexing:
Forward Error Correction:
Tables Supported:
PSI:
SI: PSIP: Gbit/s routing between modules in a
chassis
1 slot wide (4RU switch module must be
placed in slot 0; redundant module
in slot 17)
2 × 10/100/1000 Base-T Ethernet or SFP
Optical SFP (class 1 laser product)
Up to 850 MBit/s per port TS rate
250
UDP/RTP Multicast/Unicast
SPTS and MPTS
Yes
Transport stream, MPEG-2 SD/HD and
MPEG-4 SD/HD
PCR or CBR
SMPTE 2022-1
250 input streams per data port (licensed)
Yes (licensed)
SMPTE 2022-1
250 output streams per data port
(licensed)
PAT, PMT, CAT
SDT, NIT, EIT pf , TOT, TDT, BAT, AIT
MGT, TVCT, CVCT
Frame Synchronization Input
Interface:
Accepts black burst and Tri-Level
reference signal.*
Management
Interface:
10/100/1000 Base-T Ethernet
Built-in user interface:
Web
External interface:
SNMP for alarms, SOAP for configuration
and status
* If SDI reference signal support is needed, contact your sales
representative.
CLOCK REFERENCE
GPS reference input
Antenna connector:
Impedance:
1pps timing accuracy: Active Antenna Voltage
output:
Internal reference
hold-over: 1pps reference input
Number of input ports:
Input connector type:
Impedance:
Input level 1pps (1Hz):
Internal reference
hold-over:
10/100/1000 Base-T Ethernet and SFP
interface
Optical SFP (class 1 laser product)
Up to 850 MBit/s
UDP Multicast/Unicast, RTP
SPTS and MPTS
Yes
125 services
DUAL IP IO
IP Input/Output
Interface:
Operational mode:
2×10/100/1000 Base-T Ethernet and
SFP
The module can be configured to;
· 1 input and 1 output
· Seamless (Hitless) IP in
· Cloned IP out
· Dual IP in
· Dual IP out
Maximum data rate
per port:
Up to 850 Mbit/s per port in Seamless
(Hitless) in, cloned out or 1×IPIN +
1×IPOUT
Up to 850 Mbit/s sum of both ports in
Dual IP in or Dual IP out mode
Maximum number of
services per port:
250
Data format:
UDP/RTP Multicast/Unicast
Transport stream:
SPTS and MPTS
Service filtering:
Yes
Video format:
Transport stream, MPEG-2/4 (H264)
SD/HD
IP Input
IP de-jittering:
Yes, based on PCR or CBR
Forward Error Correction: SMPTE 2022-1
250 input streams per data port (licensed)
IP Output
Multiplexing:
Yes (licensed)
Forward Error Correction: SMPTE 2022-1
250 output streams per data port (licensed)
ASI INPUT
0V, 3.3V(default) or 5V
Key reference specification: EN 50083-9
Connector:
BNC female, 75Ω
Number of inputs
per module:
4
Maximum bit-rate per port: Up to 213.7Mbit/s (burst)
≤1us in 4 hrs @ΔT= 0˚C
8VSB/QAM INPUT
1
BNC female
TTL or 50 Ω
TTL
Connector:
F female, 75Ω
Number of inputs
per module:
4 demodulators
Input Level:
-34 to +40 dBmV
Frequency range:
50 – 860 MHz
Modulation:
8VSB, QAM Annex B
Band:Broadcast
SMA female
50 Ω
< 100 ns RMS
≤1us in 4 hrs @ΔT= 0˚C
SPECIFICATIONS (cont)
Digital Media Gateway DMG 3200
DVB-S/S2 INPUT
Key reference
specifications:
Connector:
Number of inputs
per module:
Decoding:
DVB-S Constellation:
DVB-S2 Constellation:
DVB-S2 Constellation
(Enhanced version):
Symbol rate DVB-S:
Symbol rate DVB-S2:
Symbol rate DVB-S2
(Enhanced version):
FEC DVB-S:
FEC DVB-S2 QPSK:
FEC DVB-S2 8PSK:
FEC DVB-S2
(Enhanced version):
DVB-S2 FEC frames:
DVB-S2 FEC frames
(Enhanced version):
Input level:
Input level
(Enhanced version):
Frequency range:
LNB voltage:
Maximum LNB
supply current:
LNB signaling:
Multiple streams
(Enhanced version):
EN 300 421, EN 302 307
F female, 75Ω
4
LDPC and BCH
QPSK
QPSK, 8-PSK
QPSK, 8-PSK, 16-APSK
1–45 MSym/s
5–30 MSym/s
1–45 MSym/s
1/2, 2/3, 3/4, 5/6, 7/8
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
3/5, 2/3, 3/4, 5/6, 8/9, 9/10
1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9, 9/10
Normal frames
Short and Normal frames
-70 to -25 dBm
-70 to -20 dBm (16 APSK, 9/10 code rate)
950–2150 MHz
0/13/18 Volt
400 mA
LNB voltage + 22kHz continuous tone
Yes, 1 per input port
DVB-T INPUT
Key reference specification: ETSI EN 300744
Connector:
F female, 75Ω
Number of inputs
per module:
4 demodulators (one connector)
Input level:
-30 to -75 dBm (at 8MHz, 3/4, 64-QAM,
gaussian channel)
Frequency range:
47 – 862 MHz
Channel bandwidth:
7 and 8 MHz
Guard interval:
1/4, 1/8, 1/16, 1/32
Carrier mode:
2k, 8k
Hierarchy stream:
High and low priority
Hierarchy mode:
All
Carrier modulation:
QPSK, 16QAM, 64QAM
FEC code rate:
1/2, 2/3, 3/4, 5/6, 7/8
Spectral inversion:
Automatic
DVB-T2
Key reference specification: ETSI EN 302755, Nordig 2.1
FFT Size:
1k, 2k, 4k, 8k, 8k extended, 16k,
16k extended, 32k, 32k extended
Guard Interval:
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
FEC frame:
Normal (64k), Short (16k)
FEC code rate (PLP):
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Constellation (PLP):
QPSK, 16-QAM, 64-QAM, 256-QAM
Channel bandwidth:
5, 6, 7 or 8 MHz
Pilot pattern:
P1–P8
SISO and MISO
transmission:
Yes
Single and Multiple-PLPs: Yes
Spectral inversion:
Automatic
Rotated constellation:
Automatic
DVB-C INPUT
Key reference specification: EN 300 429, ITU-T J83 annex A, and C
Connector:
F female, 75Ω
Number of inputs
per module:
4 demodulators (one connector)
Frequency range:
47–862 MHz
Channel bandwidth:
6, 7 and 8 MHz
QAM Mode:
4, 16, 32, 64, 128, 256 QAM
Symbol rate:
0.87-7.2 Mbaud
Spectrum inversion:
Automatic
Input power level:
- 30 to -65 dBm (at 256 QAM, 6.9 Ms/s)
PROCESSING SPECIFICATIONS
BULK DESCRAMBLING
Interface:
CA system support:
BISS support:
Maximum data rate:
Number of services
per module:
Scrambling algorithms:
SW based smart card
Please contact Sencore
Mode 1
Up to 850 MBit/s
250
DVB-CA and AES
SIM BULK DESCRAMBLING
DVB-T/T2 INPUT
Number of DVB-T/T2
inputs per module:
Input connector:
Input connector
configurations:
Input frequency range:
Input level range:
Minimum return loss:
DVB-T
Key reference specification: ETSI EN 300744, Nordig 2.0
FFT Size:
2k, 8k
Guard Intervals:
1/4, 1/8, 1/16, 1/32
FEC code rate:
1/2, 2/3, 3/4, 5/6, 7/8
Constellation:
QPSK, 16-QAM, 64-QAM
Channel bandwidth:
6, 7, or 8 MHz
Hierarchy stream:
High and Low priority
Hierarchy mode:
All
Spectral inversion:
Automatic
4
F-female, 75 Ω
1 F connector internally split or 4
F connectors
47–862 MHz
- 80 to -10 dBm (at T2, 8MHz, 256 QAM,
3/5, gaussian channel)
10 dB
Interface:
Number of SIM
card readers:
CA system support:
BISS support:
Maximum data rate:
Number of services
per module:
Scrambling algorithms:
SIM based smart card
8 in front and 8 behind front plate
(Only 8 in front can be replaced
while in operation)
Conax
Mode 1
Up to 850 MBit/s
250
DVB-CA and AES
SPECIFICATIONS (cont)
Digital Media Gateway DMG 3200
DVB DESCRAMBLING
Interface:
CA system support:
Number of services
per CAM:
DVB Common Interface
BetaCrypt, Conax, Cryptoworks, Irdeto,
Mediaguard, Viaccess, NDS Viasat, Nagra
ASI OUTPUT
DVB-CA and AES
Up to 850 MBit/s
250 (depending on SW license)
Transport stream, MPEG-2 SD/HD and
MPEG-4 SD/HD
Simulcrypt interface
4 CA systems simultaneously
Yes
Yes for DVB
No for AES
OUTPUT MODULE SPECIFICATIONS
IP OUTPUT
Interface:
Maximum data rate:
Maximum number
of services:
Data format:
Output mode:
Forward Error Correction:
10/100/1000 Base-T Ethernet output and
SFP interface
Optical SFP (class 1 laser product)
Up to 850 MBit/s
250
UDP Multicast/Unicast, RTP
CBR and VBR on SPTS
SMPTE 2022-1
250 output streams per data port (licensed)
DUAL IP IO
IP Input/Output
Interface:
Operational mode:
Maximum data rate
per port:
Maximum number of
services per port:
Data format:
Transport stream:
Service filtering:
Video format:
IP Input
IP de-jittering:
Forward Error Correction:
Yes (licensed)
SMPTE 2022-1
250 output streams per data port
(licensed)
10 (requires multi service CAM)
SCRAMBLING
Scrambling algorithm:
Maximum data rate:
Number of services
per scrambler card:
Video format:
Interface towards
CA System:
Number of CA systems:
EMM:
Entropy reduction:
IP Output
Multiplexing:
Forward Error Correction:
2×10/100/1000 Base-T Ethernet and SFP
The module can be configured to;
· 1 input and 1 output
· Seamless (Hitless) IP in
· Cloned IP out
· Dual IP in
· Dual IP out
Up to 850 Mbit/s per port in Seamless
(Hitless) in, cloned out or 1×IPIN+1×IPOUT
Up to 850 Mbit/s sum of both ports in Dual
IP in or Dual IP out mode
250
UDP/RTP Multicast/Unicast
SPTS and MPTS
Yes
Transport stream, MPEG-2/4 (H264) SD/HD
Yes, based on PCR or CBR
SMPTE 2022-1
250 input streams per data port
(licensed)
Key reference specification: EN50083-9
Connectors:
4 BNC female, 75Ω
Number of outputs
per module:
4 different Transport Streams
Maximum bit-rate per port: burst mode: 213.7Mbit/s
spread mode: 72Mbit/s
Transport stream output: SPTS and MPTS
Number of services
per card:
250 (sum of all 4 ports)
Output format:
Constant bit-rate
QAM OUTPUT
Key reference
specifications:
Interface:
Number of carriers:
Number of QAM
frequencies per module:
Modulation:
Symbol rate:
Frequency range:
Spectrum inversion:
Test mode:
Channel spacing:
Frequency step size:
Frequency stability:
Output level:
Output level stability:
Output level adjustment
step size (GUI):
MER:
Return loss:
Spurious:
EN 300 429, ITU J.83.ABC
2 × F connector female, 75 Ω
3 and 4 per group (adjacent channels)
up to 16 carriers in 4 groups, 8 per port
32 / 64 / 128 / 256 - QAM
4.48 to 7.00 Mbaud (Annex A and C)
47–862 MHz
user selectable
CW
5, 6, 7, 8 MHz (12 MHz available for 3
carrier groups)
1 Hz
2 ppm
-12 to +2.2dBm per carrier
± 0.5 dB
0.1 dB
> 42 dB
>16 dB
typ < -60 dBc
DVB-S/S2 MODULATOR, IF
Key reference specification: EN 300 421 , EN 302 307
Number of DVB-S/S2
outputs per module:
2
Monitoring ports:
1 per output (30 dB attenuated)
Output connector:
F-type female, 75 Ω
(RF Out and Test out)
Output frequency (center): 70–200 MHz
Output level:
-15 to 0 dBm
Output level stability:
± 0.5 dB
Frequency stability:
2 ppm
Return loss:
>16 dB
Spurious:
typ < -60 dBc
In-band flatness:
typ < ± 0.1 dB
Spectrum inversion:
user selectable
Precorrection:
Static. Linear and non-linear
DVB-S Coding and Modulation
Constellation:QPSK
Modulation mode:
Constant
SPECIFICATIONS (cont)
Digital Media Gateway DMG 3200
FEC outer:
FEC inner:
Code rates:
Symbol rate:
RS (188, 204)
Viterbi
1/2, 2/3, 3/4, 5/6, 7/8
0.5–45 Mbaud
DVB-S2 Coding and Modulation
Constellation:
QPSK, 8-PSK, 16-APSK, 32-APSK
Modulation mode:
CCM
FEC:BCH/LDPC
Code rates:
1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4,
4/5, 5/6, 8/9, 9/10
Frame length:
16200 bits (short), 64800 bits (long)
Symbol rate:
0.5–45 Mbaud
Roll off:
0.20, 0.25, and 0.35
DVB-S/S2 MODULATOR, L BAND
Key reference specification: EN 300 421 , EN 302 307
Number of DVB-S/S2
outputs per module:
2
Monitoring ports:
1 per output (30 dB attenuated)
Output connector:
SMA female, 50Ω (RF out)
F-type female, 75Ω (Test out)
Output frequency:
950–2150 MHz
Output level:
-20 to 5 dBm
Output level stability:
± 0.5 dB
Frequency accuracy:
2 ppm
Return loss:
>14 dB
Spectrum inversion:
user selectable
Spurious:
< -65 dBc/4kHz (@ symbol rate ≥ 256 kb/s)
In-band flatness:
typ < ± 0.1 dB
Precorrection:
Static. Linear and non-linear
DVB-S Coding and Modulation
Constellation:QPSK
Modulation mode:
Constant
FEC outer:
RS (188, 204)
FEC inner:
Viterbi
Code rates:
1/2, 2/3, 3/4, 5/6, 7/8
Symbol rate:
0.5–45 Mbaud
DVB-S2 Coding and Modulation
Constellation: QPSK, 8-PSK, 16-APSK, 32-APSK
Modulation mode: CCM
FEC: BCH/LDPC
Code rates:
1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4,
4/5, 5/6, 8/9, 9/10
Frame length:
16200 bits (short), 64800 bits (long)
Symbol rate:
0.5–45 Mbaud
Roll off:
0.20, 0.25, and 0.35
DVB-T CABLE MODULATOR
Key reference specification: ETSI EN 300744
Number of carriers:
4 independent carriers
Number of output ports: 2 (2 carriers per port)
Output connector:
F-type
Impedance:
75 Ω
Output frequency:
47–862 MHz
Frequency setting step size:1 Hz
Output level:
-12 to 2.2 dBm
Output level stability:
± 0.5 dB
Frequency accuracy:
Return loss:
MER:
Test mode:
2 ppm
>16 dB
> 42 dB
CW
DVB-T Coding and Modulation
FFT size:
2k, 8k
Guard intervals:
1/4, 1/8, 1/16, 1/32
Code rates:
1/2, 2/3, 3/4, 5/6, 7/8
Constellation:
QPSK, 16-QAM, 64-QAM
Channel bandwidth:
5, 6, 7, 8 MHz
DVB-T2 CABLE MODULATOR
Key reference specification: ETSI EN 302755
Number of carriers:
2 independent carriers
Number of output ports: 2 (1 carrier per port)
Output connector:
F-type
Impedance:
75 Ω
Output frequency:
47-862 MHz
Frequency setting step size:1 Hz
Output level:
-12 to 2.2 dBm (TBD)
Output level stability:
± 0.5 dB
Frequency accuracy:
2 ppm
Return loss:
>16 dB
MER:
> 42 dB
Test mode:
CW
DVB-T2 Coding and Modulation
FFT size:
1k, 2k, 4k, 8k, 8k extended, 16k,
16k extended, 32k, 32k extended
Guard intervals:
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
FEC frame:
Normal (64k), Short (16k)
FEC code rate:
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Constellation (PLP):
QPSK, 16-QAM, 64-QAM, 256-QAM
Channel bandwidth:
1.7, 5, 6, 7, 8, or 10 MHz
Pilot pattern:
P1–P8
Number of PLPs:
1
DVB-T/T2 MODULATOR (EXCITER)
Key reference specification: ETSI EN 302755 , ETSI EN 300744
Number of carriers:
2 independent carriers
Number of output ports: 2 (1 carrier per port)
Output connector:
BNC
Impedance:
50 Ω
Output frequency:
47-862 MHz
Frequency setting step size:1 Hz
Output level:
-15 to 0 dBm
Output level stability:
± 0.5 dB
Frequency accuracy:
2 ppm
Return loss:
>16 dB
MER:
> 42 dB
Test mode:
CW
DVB-T Coding and Modulation
Input:
TS with MIP (SFN) or remultiplexed TS
FFT size:
2k, 8k
Guard intervals:
1/4, 1/8, 1/16, 1/32
Code rates:
1/2, 2/3, 3/4, 5/6, 7/8
Constellation:
QPSK, 16-QAM, 64-QAM
Channel bandwidth:
5, 6, 7, 8 MHz
SPECIFICATIONS (cont)
Digital Media Gateway DMG 3200
DVB-T2 Coding and Modulation
Input:
T2MI (SFN) or remultiplexed TS
SFN:
Relative timestamps within 1000 ms
T2 versions:
1.1.1 and 1.2.1
FFT size:
1k, 2k, 4k, 8k, 8k extended, 16k, 16k
extended, 32k, 32k extended
Guard intervals:
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
FEC frame:
Normal (64k), Short (16k)
FEC code rate:
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Constellation (PLP):
QPSK, 16-QAM, 64-QAM, 256-QAM
Channel bandwidth:
1.7, 5, 6, 7, 8, or 10 MHz
Pilot pattern:
P1–P8
Number of PLPs:
up to 128
DVB-T/T2 GATEWAY ASI
Connectors:
4 x BNC 75Ω
Number of MPTS’s with MIP:4
Number of T2MI streams: 2
Maximum ASI bit-rate
per port:
Spread Mode: 72Mbit/s
Burst Mode:
213Mbit/s
Re-multiplexing:
See common output module specifications
DVB-T MIP Inserter
Key specification:
Relative timestamps:
DVB-T2 T2MI
Key reference
specifications:
T2 version:
T2MI signaling:
Clock modes:
PAPR:
MISO/SISO:
Guard intervals:
FFT sizes:
Pilot Patterns:
L1 Constellations:
Bandwidth:
DVB-T2 PLP support
Number of PLPs:
PLP mode:
PLP types:
TI types:
Automatic calculation:
FEC frame:
FEC code rate:
Constellations:
Rotated constellations:
ISSY supported:
ETSI EN 300 744, ETSI TS 101 191
<1s
EN50083-9, ETSI EN 302 755,
ETSI TS 102 773
1.1.1 and 1.2.1
T2MI is signaled in PSI/SI as a data service
Relative Timestamps <1s (SFN) and Null
timestamps (MFN)
TR and ACE (global on/off)
Yes
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
1k, 2k, 4k, 8k, 8k extended, 16k,
16k extended, 32k, 32k extended
P1 – P8
QPSK, 16-QAM, 64-QAM, BPSK
1.7, 5, 6, 7, 8, 10MHz
240 in total between all T2MI streams
HEM, constant bit-rate
1 and 2
Within a T2 frame and across multiple
T2 frames
FEC blocks, TI blocks, TI frames and TI type
Normal (64k), Short (16k)
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
QPSK, 16-QAM, 64-QAM, 256-QAM
Yes
Yes
DVB-T2 GATEWAY IP
Connectors:
2 × 10/100/1000 Base-T Ethernet output
or 2× Optical
SFP (class 1 laser product)
Number of MPTS’s with MIP:4
Number of T2MI streams: 4
Maximum data rate:
Output mode:
Data format:
Support for cloned output:
Forward Error Correction:
Re-multiplexing:
Up to 850 MBit/s
CBR
UDP/RTP Multicast/Unicast
Yes
SMPTE 2022-1 (Licensed)
See common output module
specifications
DVB-T MIP inserter
Key specification:
Relative timestamps:
ETSI EN 300 744, ETSI TS 101 191
<1s
DVB-T2 T2MI
Key reference
specifications:
T2 version:
System redundancy:
Regionalization:
T2MI signaling:
Clock modes:
PAPR:
MISO/SISO:
Guard intervals:
FFT sizes:
Pilot Patterns:
L1 Constellations:
Bandwidth:
EN50083-9, ETSI EN 302 755,
ETSI TS 102 773
1.1.1 and 1.2.1
1+1 protection on unit with T2MI
frame (licensed)
Output redundancy based on OSPF
(licensed)
Network level redundancy (licensed)
Yes. Please contact Sencore for more
information
T2MI is signaled in PSI/SI as a data
service
Relative Timestamps <1s (SFN) and
Null timestamps (MFN)
TR and ACE (global on/off)
Yes
1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128
1k, 2k, 4k, 8k, 8k extended, 16k,
16k extended, 32k, 32k extended
P1 – P8
QPSK, 16-QAM, 64-QAM, BPSK
1.7, 5, 6, 7, 8, 10MHz
DVB-T2 PLP support
Number of PLPs:
PLP mode:
PLP types:
TI types:
Automatic calculation:
FEC frame:
FEC code rate:
Constellations:
Rotated constellations:
ISSY supported:
240 in total between all T2MI streams
HEM, constant bit-rate
1 and 2
Within a T2 frame and across multiple
T2 frames
FEC blocks, TI blocks, TI frames
and TI type
Normal (64k), Short (16k)
1/2, 3/5, 2/3, 3/4, 4/5, 5/6
QPSK, 16-QAM, 64-QAM, 256-QAM
Yes
Yes
SPECIFICATIONS (cont)
Digital Media Gateway DMG 3200
ENVIRONMENTAL CONDITIONS
Operational Conditions
Temperature:
Humidity:
0 to +40 °C
5–95% (non-condensing)
Storage
Temperature:
Humidity:
-20 to +70 °C
5 to 95% (non-condensing)
Electrical Safety
IEC 60950-1
EMC
EN 55022, EN55013, EN50083-2, EN55024, EN61000-3-2, EN61000-3-3,
FCC CFR 47 Part 15
RoHS
Compliant
WEEE
Compliant
CHASSIS
DMG 3200-4
Physical dimensions:
19” × 4RU × 400mm
(440 × 177 × 400 mm)
Power Supply
Power:
Input voltage:
Redundancy:
Monitoring:
800 Watt
100-240 V AC, 50/60 Hz
Yes, dual hot swappable PS
Via WEB GUI and LED indicators on PS
Cooling
Fans:
Hot swap of fans:
Airflow direction:
4 fans
Yes, fans are independently hot
swappable
Front to back
DMG 3200-1
Physical dimensions:
19” × 1RU × 400mm
(440 × 44 × 480 mm)
Power Supply
Power:
Input voltage:
Redundancy:
Monitoring:
400 Watt
100-240 V AC, 50/60 Hz
optional: -48V DC
Yes, dual hot swappable PS
Via WEB GUI and LED indicators on PS
Cooling
Fans:
Hot swap of fans:
Airflow direction:
6 fans
Yes, common fan module with all 6 fans
Front to back
Provided by: Mega Hertz 800-883-8839
info@go2mhz.com
www.go2mhz.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising