ADC Platform 3600 User's Manual

ADC Platform 3600 User's Manual
LoopStar® Network Management
LoopStar 800/1600/3600 Provide Flexible Options for Network Management
LoopStar 800
LoopStar 3600
LoopStar 1600
Spec Sheet
Overview
ADC’s LoopStar next generation SONET product family provides service providers and enterprise
customers several choices when deciding how to manage their networks. The choices include: 1) A
full GUI-based Element Management System (EMS) for large complex networks; 2) An EMS- Local
Craft Terminal (LCT) for centralized management of relatively small networks via a single layer
solution; 3) Web-LCT which is resident on the LoopStar system and provides GUI control using a
PC- based web browser; and 4) Transaction Language (TL-1) command language with direct serial
communication between a PC or higher layer NMS and the LoopStar SONET system. These flexible
options enable customers to select the right level of network management for their LoopStar
systems, based on their considerations of complexity and cost.
w w w.ad c.co m
•
+1-952-938-8080
•
1-800-366-3891
LoopStar® Network Management
LoopStar 800/1600/3600 Provide Flexible Options for Network Management
The LoopStar EMS is an advanced userfriendly Graphical User Interface (GUI) Element
Management System (EMS) for controlling and
managing networks consisting of LoopStar
800/1600/3600 SONET access systems. The
LoopStar EMS provides users with sophisticated
centralized control capabilities for configuring,
monitoring, testing, and managing multiple
LoopStar 800/1600/3600 systems from a single
management platform.
The LoopStar EMS-LCT is an element
management layer (EML) management system
for LoopStar 800/1600/3600 SONET Access
Systems. The LoopStar EMS-LCT is intended
for small, relatively simple networks. It provides
users with single-layer management network
solutions to the LoopStar 800/1600/3600 of
up to eight NEs and manages the systems in a
centralized manner.
Network Configuration Management
and System Alarming
System and Circuit
Provisioning
LoopStar 800/1600/3600 systems are highly
advanced next-generation SONET Access
Systems that allow service providers to costeffectively deploy and manage TDM and
Ethernet services to end-user customers.
Performance
Monitoring
and Testing
With the LoopStar EMS or EMS LCT, service
providers can perform advanced management
control functions for their entire network of
LoopStar 800/1600/3600 systems, all from
a common management platform. Specific
capabilities of the LoopStar EMS and
EMS-LCT include:
• Configuration Management: Network
connections, system and circuit provisioning,
system inventory
• Fault Management: Alarm management
and control, alarm history database
management
•
• Performance Monitoring: Real-time traffic
management, monitoring and alarming, PM
database management
• Security: System access and password control
4/08
101709AE LoopStar® Network Management
LoopStar EMS and EMS-Local Craft
Terminal (LCT)
• Testing: Circuit and test management control
LoopStar Network
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
2
LoopStar® Network Management
The LoopStar EMS is a Windows®-based
software application designed to operate in
standard client-server-based configurations.
The system is a scalable platform consisting of
a central database/server software application
with options for multiple client servers hosted
from the central server. The total number
of LoopStar 800/1600/3600 elements to be
managed by a common LoopStar EMS is a
function of the server/client system and memory
capacity. Standard network configurations
are approximately 1-32 systems per
LoopStar 800 EMS.
Communications between the LoopStar
EMS and network LoopStar 800/1600/3600
systems is via TL1 or SNMP message control
over Ethernet LAN/WAN communications.
The LoopStar EMS can also funnel network
configuration, alarms and performance
monitoring information to higher-order network
management systems via TL1/CORBA/MML
north-bound LAN/WAN
interface communications.
Transaction Language (TL1)
TL1 is a derivation of the CCITT Man-Machine
Language (MML). The LoopStar SONET product
family TL1 specification is derived from Telcordia
standards referenced in the TL1 Command
Set Technical Publication. The LoopStar
800/1600/3600 can be managed directly via
TL1 commands by technicians who log into
the NE LAN port using terminal emulation on
a PC. They can perform all of the network
management functions referenced in the EMS/
EMS-LCT section of this document. Using TL1
the LoopStar 800 has complete integration into
Telcordia ‘s TIRKS and NMA OSS systems for
inventory and network monitoring.
The LoopStar EMS-LCT is a PC-based software
application designed to work on Windows 2000
or Windows XP system. The LoopStar EMS- LCT
provides management and configuration
functions at the NE layer to a single
concurrent session.
Web-Local Craft Terminal
The Web-LCT is a JavaScript application
embedded in LoopStar Network Element (NE)
software. Through the Web-LCT, customers can
manage, maintain and configure the LoopStar 800
using Microsoft Internet Explorer. Users can access
the LoopStar 800 and configure services or query
alarms on it just by opening Microsoft Internet
Explorer on their terminal computers and then
entering the IP address of the NE. Once accessed,
the Web-LCT provides configuration management,
fault management, performance monitoring,
security and testing management. Web-LCT
will be available on the LoopStar 1600 in the
near future.
4/08
•
101709AE LoopStar® Network Management
LoopStar 800/1600/3600 Provide Flexible Options for Network Management
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
3
System Requirements
LoopStar EMS
LoopStar EMS-LCT
Server
Personal Computer
PC Desktop PC-P4 2.4GHz or above, or
PC Server-P4 PE6600-4xXeon 1.9GHz or
above, or HP Workstation-xw6000-2xP4
Xeon 2.4GHz or above
512M-40G-FDD/DVD/Video adapter
10&100BT Network adapter
Windows2000 Professional
Client
Desktop PC-P4 2.4GHz or above
512M-40G-FDD/DVD/Video adapter, or
HP Workstation-xw6000-2xP4 Xeon
2.4GHz or above
1GB-2x36GB
Pentium 1.3 GHz or above
256M/30G/FDD/DVD
Windows 2000 or XP
Web-LCT
Personal Computer
Microsoft Windows 9X, 2000, XP or NT
Microsoft Internet Explorer 5.5 or later
800x600 pixel resolution (minimum)
Pentium II 600 or higher
128 MB memory (minimum)
Ordering Information
Description
Catalog Number
LoopStar EMS Items
LoopStar EMS Server (Server SW and SQL Database)
LPS-EMS800SRV-L1
LoopStar EMS Client (Client SW and ILOG Tools)
LPS-EMS800CLNT-L1
LoopStar NE License Authorization Charge (RTU) per NE, first 30 NEs
LPS-EMSRTU-L1
LoopStar NE License Authorization Charge (RTU) per NE, NE 31 and above
LPS-EMSRTU-L2
LoopStar EMS-LCT Items
Spec Sheet
LoopStar EMS- LCT Software (PC)
LPS-EMSLCT
Web-LCT
LoopStar Web- LCT Software (PC)
NA - resident on NE
Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
101709AE 4/08 Revision © 2008, 2005 ADC Telecommunications, Inc. All Rights Reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement