ADC RS-422 User's Manual
UniPatch® Modular System
UniPatch® System Overview................................................. 86
UniPatch® Backplane Options............................................... 87
UniPatch® Module Options
GigE................................................................................ 88
Bantam Audio................................................................. 90
Video.............................................................................. 91
AES Balun....................................................................... 92
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
85
UniPatch
RS-422............................................................................ 89
UniPatch® Modular System
Broadcast and Entertainment Products
Midsize Video
Bantam Audio
Video RGBS
RGB
Video
Loaded UniPatch Chassis
The UniPatch® modular patching system with universal chassis allows you to combine data, audio,
and video patching modules in a single two-rack-unit modular panel. Order a mix of jack and backplane
modules to create a totally custom patching system, or order a preconfigured panel RS-422 data jacks.
You can start with only a few modules and add or change modules as needed. The universal chassis
with mix-and-match jack and backplane modules provides the ultimate in flexibility.
Modular Chassis for
Unprecedented Flexibility
Features
• J acks and backplanes have a modular design
and fit into the rugged high-density card cage
chassis. Just plug in a module to add more
jacks or backplane connectors
• M
odularity lets you start small and add
modules and cards as needed
• Individual circuits are easily replaced without disturbing other circuits
• B
ackplanes available in high-density 64-circuit
bantam audio, high-density 32-port data,
standard-density 24-port data, and video
options
Mix-and-Match
Plug-in Jack Modules
The following modules (details on following pages)
may be assembled on site in mix and match
combinations. Data and bantam modules may be
ordered in a fully loaded preconfigured chassis.
Features
• C
ategory 3 compliant RS-422 modules
for demanding professional data patching
applications
• B
antam audio modules in user-selectable
normalled configurations
• V
ideo modules for analog, SD, HD, and
analog component
• G
old-plated card edge connectors tested to
withstand heavy use and vibration
• AES 110 W to 75 W coaxial baluns
• Shallow 7" deep chassis is perfect for
mobile applications
• Category 5, 5e and 6 data patching
• BNC bulkhead feedthroughs
•
102117AE RS-422 Data
5/08
UniPatch
Overview
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
86
UniPatch® Modular System
Ten different backplane connector types are available, and because they come in modular units, they
can be mixed and matched like the jack modules. Each backplane supports up to eight jack modules.
Features
• Available modules:
–– Dsub9 connectors
–– AMP Champ 50-pin receptacle
–– EDAC 3-pin plug
–– EDAC 90-pin plug
–– QCP MKII for data 20x8
UniPatch
–– QCP MKII for audio 12x8
Dsub9, RS-422
Rear Module
(for data)
(VPRM-D9-W)
AMP 50-Pin Receptacle
Rear Module
(for data)
(VPRM-A50-W)
EDAC 90-Pin
Rear Module
(for data)
(VPRM-E90-W EDAC)
QCP MKII
Rear Module
(for data)
(VPRM-MKII-W)
EDAC 3-pin
Rear Module
(for audio)
(VPRM-BAN-E3)
QCP MKII
Rear Module
(for audio)
(VPRM-BAN-MKII)
5/08
•
102117AE Broadcast and Entertainment Products
Backplane Options (mix-and-match)
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
87
Unipatch Modular Systems
GigE Modules
Broadcast and Entertainment Products
• Dense pack patching
• Minimum of 30,000 patch cycles
• Normal-through patch by exception
• Modular design (can be removed without
disturbing adjacent circuits)
• Gold-plated contacts on switches and card
edge connectors
• Keyed opening for proper patch cord
orientation
DM-GIGE
LSA-PLUS® 8-Circuit Backplane Module
Features:
• Patented LSA-PLUS® termination system
modules can be removed individually for
easier wiring
• Number designation labels included
• Designation strip and window included for
custom labeling
• Designed for solid or stranded wire
• Eliminates the need for additional connectors
and connector labor
VPRM-GIGE-LSA
(rear view)
Note: For complete configuration and ordering
information, please refer to Data Section.
•
102117AE Features:
5/08
UniPatch
Gigabit Ethernet Jack Module
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
88
UniPatch® Modular System
The UniPatch® Category 3 compliant RS-422
module raises the standard in machine control
patching with its quality and robust design. Now
you can patch machine control data properly
using reliable, durable, military-grade jacks rated
for 30,000 insertion/withdrawal cycles. Each
circuit switches all ten pins, making the module
fully SMPTE 207M compliant. Compared to other
systems employing light-duty RJ45 connectors
rated at fewer than 500 insertion/withdrawal
cycles or bantam jacks that do not switch all
signal lines, the UniPatch RS-422 module is a
significant advance in machine control patching.
Features
• The standard in professional data patching
• D
urable military-grade switch system rated for 30,000 insertion/withdrawal cycles. Unlike RJ45 systems,
suitable for heavy daily professional use.
• T ough military-grade, gold-plated switch with long cantilever beam springs and unique self-wiping contacts
ensures against premature wear and provides positive contact force
• R
S-422 cards offer the highest density available. Up to 32 modules in two rack units for 33 percent
greater density
• Normalled or non-normalled cards available
• M
odular termination options: Dsub9, DB-25, EDAC 90-pin plug, QCP II, Ultra Patch, standard-density,
24 per frame, or Dsub9 high-density, 32 per frame (requires thin shell strain relief)
• Keyed for proper patch cord orientation
• Category 3 compliant for 10 Base-T data
•
5/08
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
89
UniPatch
• F ully SMPTE 207M compliant circuits switch all ten pins, unlike bantam systems, which do not switch all
ground pins, potentially causing problems
102117AE Broadcast and Entertainment Products
RS-422 Modules
UniPatch® Modular System
Bantam Audio Modules
The bantam audio jack modules for the
UniPatch system are perfectly designed
for professional digital and analog audio
applications. Up to 32 modules plug into
the UniPatch chassis to provide a 64-circuit
(128 jacks) configuration when fully loaded,
matching typical router configurations. Each
module contains two circuits and four WECOstandard precision bantam jacks designed for
long life. High-performance switches allow
flexible normalling and grounds for each circuit.
Large .440" x .325" designations provide
enough room for three lines of text.
Precision Impedance Matched DIP Switch
Features
• High-density, selectable normals, and excellent reliability
• 3
3 percent higher density than conventional frame-type bantam bays. Up to 32 cards in a frame with
2 circuits (4 jacks) per card for a total of 64 circuits (128 jacks)
• 32-across spacing exactly matches typical router configurations and provides larger designation area
• S witch-selectable normals and grounds for each circuit: normals strapped (NS), half-normal (HN), bussed
ground (BG), or no normals (NN)
• W
ECO-standard jacks meet or exceed MIL-STD-202 for mechanical durability as well as corrosion, salt spray,
thermal shock, moisture resistance, and vibration
• P recision-molded housing and sturdy, integrated all metal springs rated for 10,000 insertion/withdrawal
cycles. Gold crossbar, self-cleaning contacts ensure a positive connection
• M
odular termination options: QCP II, EDAC 3-pin plug, EDAC 90-pin plug, DB-25, AMP Champ 50-pin
receptacle, or QCP IV with 4-foot umbilical Ultra Patch panel
• S nap-on designation holders accept individual labels without tools; conventional chassis-wide designation
strips are also available. Large designations provide enough room for three lines of text
• Fully compliant 110 Ω circuit board meets demanding AES specifications
•
102117AE Broadcast and Entertainment Products
Two circuits per card
5/08
UniPatch
®
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
90
UniPatch® Modular System
ADC offers a full line of UniPatch® video patching
modules, making it easy to assemble a custom
video patch panel for any application. Modules
are available for analog, SD, HD, or component
video. Included in the selection of jacks are
the standard size SVJ, midsize MVJ, and MUSA
SMJ-series HD jacks for outstanding performance
at high-definition data rates and beyond.
Features
• S tandard jacks mount 24 across, midsize jacks
mount 32 across
• S tandard-size, HD video modules contain
SVJ-2 normalled-through Super Video Jacks
with or without termination
• S tandard size straight-through modules
contain CJ2014N jacks without termination or
CJ2020N-75 jacks with termination
• M
idsize HD video modules contain MVJ-3
normalled-through Super Video Jacks with
or without termination
• M
idsize straight-through modules contain
CJ3014/4014 jacks without termination or
CJ3014N-75/4014N-75 jacks with termination
Standard Size Video Module
also available with CJ2020N75
terminated single jacks
(VM-2014-BK)
• M
odules are available for analog component
video in the following configurations: RGB,
PrPBY, RGBS, and RGBHV
• Large designations snap on without tools
providing enough space for four rows of text
Standard Size HD Video Module
(VM-SVJ-BK)
RGBHV Video Module
(VM-RGBHV-MVJ-BK)
•
5/08
Midsize HD Video Module
(VM-MVJ-BK)
RGB, P P Y HD Video Module
(VM-RGB-MVJ-BK)
r
B
All modules provided with colored inserts to allow the user to customize for any use.
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
91
UniPatch
• M
USA modules contain SMJ-2100 HD-rated
MUSA standard jacks.
102117AE Broadcast and Entertainment Products
Video Modules
UniPatch® Modular System
Broadcast and Entertainment Products
102117AE The patented AES 110 W to 75 W balun modules
provide precision impedance matching for
interfacing balanced twisted pair AES audio to
unbalanced coaxial audio. Eliminate the nuisance
of XLR soldering and the mess of baluns hanging
from equipment. Replace them with this clean,
simple solution.
Features
• M
ounts on side of equipment rack with velcro
or can be rack mounted
• M
odules contain four circuits for up to 64
circuits per 2 RU chassis
• W
orks with quick-to-install QCP punchdown
termination modules or EDAC 3-pin plug
• 1
Vp-p plug-in pad is available for equipment
that cannot accept high-input voltages.
Plug-in pad feature allows each circuit to
be tailored for 1 Vp-p operation in 1dB
increments to -20dB
• New splitter module provides 2-in/4-out
passive split/110 Ω to 75 W converter
AES 110 W to 75 W Converter
(AM-411075-E3-FF)
AES 2:4 Splitter
(AM-2110-475-E3)
AES 110 W to
75 W Converter
(AM-411075-MKII)
•
5/08
UniPatch
AES Balun Modules
Precision Transformers,
Glass Epoxy Circuit Board,
True 75 W BNC Connectors
(front view)
(rear view)
UniPatch System fully loaded with 16 AES balun modules for 64 110-75 Ω circuits
(allows modules to be mounted either way)
For in-line baluns, see page 75
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
92
UniPatch® Modular System
5/08
•
102117AE Description
Catalog Number
Empty Chassis
Empty UniPatch® chassis, black, supplied with VP-DES-343-32 kit
VP2232-BK
Empty UniPatch chassis, gray, supplied with VP-DES-343-32 kit
VP2232-G
Bantam Audio Fully Loaded Chassis
64-circuit loaded system QCP II, black*
VP2232-BANQCP-BK
64-circuit loaded system EDAC 3-pin plug, black*
VP2232-BANE3-BK
RS-422 Data Fully Loaded Chassis - normalled**
24-circuit Dsub9 normalled, gray, no backshell kits
VP2224-D9-G
24-circuit Dsub9 normalled, black, no backshell kits
VP2224-D9-BK
32-circuit Dsub9 normalled, gray, no backshell kits
VP2232-D9-G
32-circuit Dsub9 normalled, black, no backshell kits
VP2232-D9-BK
32-circuit Dsub9 normalled, black, with backshell kits
VP2232-D9-BK-S
32-circuit Dsub9 normalled, gray, with backshell kits
VP2232-D9-G-S
RS-422 Data Fully Loaded Systems - non-normalled**
24-circuit Dsub9 non-normalled, black, no backshell kits
VP2224-NND9-BK
32-circuit Dsub9 non-normalled, black, no backshell kits
VP2232-NND9-BK
32-circuit Dsub9 non-normalled, gray, no backshell kits
VP2232-NND9-G
* N
ormal configurations on bantam audio cards to be set by user.
32-circuit Dsub9 systems require the use of a thin backshell kit.
**The thin backshell Dsub9 provides strain relief for standard
Dsub9 connectors. This shell kit is highly recommended
on 32-circuit UniPatch RS-422 systems and is included
where indicated.
The backshell kits are found on page 95.
Dsub9 Thin Backshell Kit
(Does not include Dsub9 connector, included wtih -S only.)
Ordering Information
Description
Catalog Number
Traditional RS-422 Patch Panels
RS-422 2x12 non-normalled RJ45, black
PEM-9NCDA1-BK-NN
RS-422 2x24 dual bantam to Dsub9 normalled
PPB3-5R422D9NS
RS-422 2x12 dual bantam to Dsub9 normalled
PPB3-5R422D9NS-12
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
93
UniPatch
Broadcast and Entertainment Products
Ordering Information
UniPatch® Modular System
Catalog Number
AES 110 W to 75 W, 4-circuit BNC to QCP II
2 spaces
AM-411075-MKII
AES 110 W to 75 W, 4-circuit BNC to EDAC 3-pin plug
2 spaces
AM-411075-E3
AES 110 W to 75 W, 4-circuit BNC to EDAC 3-pin plug, front facing
2 spaces
AM-411075-E3-FF
2:4 splitter balun module 110 W to 75 W
2 spaces
AM-2110-475-E3
AES Balun Modules
Plug-in pad (replace “XX" with 01 to -20db) qty: 25 each
-
SCAP-XX
Audio Modules
Bantam audio, adjustable normals, 2-circuit (4 jacks), black
1 space
AM-BAN-BK
2-port GigE normalling jack module: PCB with green masking
1 space
DM-GIGE
2-port GigE non-normalling jack module: PCB with black masking
1 space
DM-GIGE-NN
RS-422 data, 10-pin, normals through, black
1 space
DM-422-BK
RS-422 data, 10-pin, normals through, gray
1 space
DM-422-G
RS-422 data, 10-pin, non-normalled, black
1 space
DM-422-NN-BK
RS-422 data, 10-pin, non-normalled, gray
1 space
DM-422-NN-G
Ethernet data, Cat 5 RJ-RJ non normalled coupler, black
1 space
DM-RJC5-BK
Ethernet data, blank adapter, black
1 space
DM-6S-BK
Blank module, black
4 spaces
DM-BLANK-BK
Blank module, gray
4 spaces
DM-BLANK-G
Standard, CJ2020N-75 terminated single, 3-circuit, black
4 spaces
VM-2020-BK
Standard, Super Video Jack SVJ-2, 3-circuit, black
4 spaces
VM-SVJ-BK
Data Modules
Universal Blank Modules
Video Modules
†
Standard, Super Video Jack SVJ-2T, terminated, 3-circuit, black
4 spaces
VM-SVJT-BK
Midsize, Super Video Jack MVJ-3, 4-circuit, black
4 spaces
VM-MVJ-BK
Midsize, Super Video Jack MVJ-3T, 4-circuit, terminated, black
4 spaces
VM-MVJT-BK
4 spaces
VM-MVJ-G
4 spaces
VM-MVJT-G
Midsize, MVJ-3, RGB+HV, black
4 spaces
VM-RGBHV-MVJ-BK
102117AE Midsize, Super Video Jack MVJ-3, 4-circuit, gray
Midsize, Super Video Jack MVJ-3T, 4-circuit, terminated, gray
Midsize, CJ3014/4014N, 4-circuit, black
4 spaces
VM-CJMID2-BK
Midsize, CJ3014/4014N-75, 4-circuit, terminated, black
4 spaces
VM-CJMIDT2-BK
•
Broadcast and Entertainment Products
Required
Chassis Space
Description
Midsize, MVJ-3, RGB, P P Y HD module, black
Midsize, CJ3014/4014N-75, 4-circuit, terminated, gray
4 spaces
VM-CJMIDT2-G
5/08
UniPatch
Ordering Information
Midsize, MVJ-3T, RGB+HV, terminated, black
4 spaces
VM-RGBHV-MVJT-BK
4 spaces
VM-RGB-MVJ-BK
Midsize, MVJ-3T, RGB, P P Y HD module, terminated, black
4 spaces
VM-RGB-MVJT-BK
r
B
r
B
Ordering information continues on next page.
Note: Conventional XLR baluns listed on page 76.
†
Video circuits are supplied with designations and circuit indications.
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
94
UniPatch® Modular System
Description
Catalog Number
Rear Modules for Audio and Data Applications
Audio QCP II, 8-circuit for bantam audio applications
VPRM-BAN-MKII
Audio EDAC 3-pin plug, 8-circuit for audio applications
VPRM-BAN-E3
DB-9, 32-circuit Ultra Patch, 3-foot umbilical, white, for audio applications
VPRM-3DB9-W
Universal AMP 50-pin receptacle, 8-circuit, RS-422, white
VPRM-A50-W
Gigabit Ethernet LSA-PLUS® 8-circuit backplane module
VPRM-GIGE-LSA
Universal DB-9, 8-circuit, RS-422, white, for data applications
VPRM-D9-W
Universal EDAC 90-pin plug, 8-circuit, RS-422, white
VPRM-E90-W
Universal QCP II, 8x10 circuit, white, for data applications
VPRM-MKII-W
Ordering Information
Description
Catalog Number
Dsub9 thin backshell connector kit, 1 count
DB9-TSHELL1-KIT
Dsub9 thin backshell connector kit, 16 count
DB9-TSHELL16-KIT
Dsub9 thin backshell connector kit, 64 count
DB9-TSHELL64-KIT
Patch cord kit with two RS-422 ends, 10-pin black, no cable
PC-422-KIT
Bantam audio module extraction tool
VP-BAN-TOOL
Rear cable management kit (mounts in rear rack rails), black
PPI-EXT-BAR-BK
Rear cable management kit (mounts in rear rack rails), gray
PPI-EXT-BAR-G
Replacement Designation Strip Kits*
Kit of 2 pieces, 17" x .640" full-length designation strips
(includes window and mounting screws)
VP-DES-680-32
Kit of 128 windows, .440" x .343" designation windows for bantam modules
VP-DES-BAN
Kit of 16 windows, 2.01" x .343" designation windows for video modules
VP-DES-VIDEO
Kit of 4 pieces, 4.174" x .289" designation strips for bantam, video or data modules
(includes windows and mounting screws)
VP-DES-343-4
Kit of 2 pieces, 17" x .289" designation strips for loaded bantam or data chassis
(includes windows and mounting screws. Order two kits for loaded bantam systems)
VP-DES-343-32
* See UniPatch® Installation Guide ADCP-75-009 for additional information on selecting the correct designation
kit for your UniPatch system. Designations are supplied with chassis and system configurations; kits are for
replacement only
5/08
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
95
UniPatch
Accessories
•
102117AE Broadcast and Entertainment Products
Ordering Information
UniPatch® Modular System
Catalog Number
Gigabit Ethernet and RS422 Cat 6 Patch Cords
0.6 m (2 ft)
PC-GIGE-2
0.9 m (3 ft)
PC-GIGE-3
1.2 m (4 ft)
PC-GIGE-4
1.8 m (6 ft)
PC-GIGE-6
UniPatch Data Patch Cord
UniPatch Data Patch Cords
®
UniPatch RS-422 10-pin black 2'
PC-422-2BK
UniPatch RS-422 10-pin black 3'
PC-422-3BK
UniPatch RS-422 10-pin black 4'
PC-422-4BK
UniPatch RS-422 10-pin black 6'
PC-422-6BK
UniPatch RS-422 10-pin to RJ45, black 2'
PC-422-RJ45-2BK
UniPatch RS-422 10-pin to RJ45, black 3'
PC-422-RJ45-3BK
UniPatch RS-422 10-pin to RJ45, black 4'
PC-422-RJ45-4BK
UniPatch RS-422 10-pin to RJ45, black 6'
PC-422-RJ45-6BK
Traditional Data Patch Cords
RJ45-RJ45 1', blue
TP5ETA-BL01
RJ45-RJ45 2', blue
TP5ETA-BL02
RJ45-RJ45 3', blue
TP5ETA-BL03
RJ45-RJ45 4', blue
TP5ETA-BL04
Dual bantam to single RJ45, 72"
PAT-100904
Dual bantam to dual RJ45, 72"
PAT-100900-006
•
102117AE Broadcast and Entertainment Products
Description
5/08
UniPatch
Ordering Information
www.adc.com
•
+1-952-938-8080
•
1-800-366-3891
96
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising