features - Powertecnique
i
5KVA to 10kVA
1 Phase In - 1 Phase Out
IDEAL PROTECTION FOR:
Online Double
CONVERSION TECHNOLOGY
FEATURES
•
Real Digital Signal Processor
controller
•
•
•
•
•
Mid-range computer systems
Industrial applications
Process control equipment
Critical servers
Critical networking equipment
HIGH LEVEL PROTECTION WITH
TOWER & RACK CONVERTABILITY
•
Parallel redundant operation up to
4 units
The iSaxon UPS range from Powertecnique features advanced
communications; RS232 and USB interfaces, and an internal
adaptor slot for SNMP devices.
•
Input power factor correction PFC
(>0.99)
By having a digital front panel display that can be rotated, the
iSaxon can be turned to suit the installation needs.
•
Low total harmonic distortion
(THD) level
•
Transformerless design
•
High performance using PWM
sinewave topology
The iSaxon UPS utilises the latest online double conversion
technology to provide the highest level of protection available.
This latest UPS technology stabilises voltage which can prolong
equipment life and keep the battery in peak condition for when
power failures occur.
•
Cold start function
•
Intelligent battery management
system extends the life time of
batteries
Overload, overheat and short
circuit protections
•
User friendly multi-functional LED/
LCD display panel
•
Energy saving mode (ECOMODE)
•
Smart fan speed regulation
•
RS232 communication port and
management software
•
Internal SNMP, DRY contact RS485
card options
•
1 year on-site warranty
Your Power Protected
The intelligent battery management system on the iSaxon
extends the life of batteries and therefore reduces the total cost
off ownership.
1 UNIT,
2 APPLICATIONS
MM-iSD5kVa10kVa-02-1016
•
Online double conversion technology provides continuous and
total protection against the harmful effects of voltage spikes,
sags, surges, transients, brownouts and blackouts with the
added option to extend battery backup runtimes.
i
Technical Specifications
iSaxon 5000
INPUT
Power (kVA)
iSaxon 6000
iSaxon 10000
6
10
5
Voltage (Nominal)
220/230V
Voltage (Min-Max)
160V - 280V
Frequency
45 - 65Hz
Power Factor
>0.99
Phase Configuration
1Ph + N + PE
Power Factor
0.8
Phase Configuration
1Ph + N + PE
Voltage (Nominal)
220V / 230V (Adjustable)
Nominal Current at 220V
Frequency
23A
27A
OUTPUT
Frequency Regulation
±1Hz ; ±3Hz
THD at 100% Linear Load
<3%
THD at 100% Non-Linear Load
<5%
Static Voltage Regulation (0% - 100%
Load)
<1%
Crest Factor
3:1
Transfer Time
0 ms
Overload Capacity
110% for 2 minutes, 125% for1 minute, 150% - transfer to bypass
Total Efficiency
>92%
Greenmode Efficiency
Terminals
Outlets (Optional)
External socket box, (2 pcs Schuko, 4 pcs IEC outlet)
BATTERY
Maintenance-free lead acid batteries
DC Voltage
240V
Quantity Per String
20pcs
Cold Start
Present
Back Up Time Half Load
DISPLAY
Recharge Time
ENVIRONMENT PROTECTION
>97%
Output Connection
Battery Type
PHYSICAL
45.5A
50/60Hz ± 0.2% (Adjustable)
20 min
15 min
4-6 Hours (to 90% Of Full Capacity)
Line Mode, Backup-up Mode, Eco-mode, Bypass Supply, Battery Low, Battery Bad/
Disconnect, Overload, UPS Fault, Interruption during Transfer
LED + LCD Display
Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load %, Battery Voltage,
Internal Temperature
LCD Display
Self Diagnostics
Upon Power on, Front Panel setting and Through Software Control, 24hr Routine Check
Overload Protection
Inverter Supply; 105%-150% for 160 seconds ~2 Cycles before switching to Bypass.
Bypass Supply: 105%-200% for 500 Seconds ~ 8 Cycles before Stopping Supply to Load
Short Circuit Protection
Switch off Immediately
Other Protection
Overheat, Battery Low
Operating Temperature
0°C - 40°C
Optimum Temperature to Extend
Battery Life
Humidity
20°C - 25°C
Up to 90% (Non-Condensing)
Audible Noise at 1m
<50 dB
Protection Class
IP 20
Net Weight (Power Module)
25kg
Net Weight (With Internal Batteries)
55kg
Dimensions (mm) (HxWxD) – Power
Module
440x88x680
Dimensions (mm) (HxWxD) – With
Battery Expansion
Standards
26kg
440x132x680
440x176x680
EN62040-1-1 (Safety); EN62040-2 (EMC); EN62040-3 (Performance);EN60950-1
E&OE
[email protected]
www.powertecnique.com
Supplier # 86346
Power Tecnique Ltd, Unit 4 Concorde Tel: +44 (0)1489 560700
Close, Fareham, Hampshire, PO15 5RT, UK Fax: +44 (0)1489 560742
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement