Aiphone MC-60 User's Manual

Aiphone MC-60 User's Manual
Models: MC-60/4A
- MC-60/4B
The MC-60/4 is a paging and communication system designed for retail stores, factories, and warehouses. The
Market-Com locates individuals quickly through paging, and has two-way communication between any station in the
system. The system is equipped with 4 communication channels, capacity of up to 60 stations, and incorporates
paging and background music.
MC-60/4A : MC-60/4A
(max.10) Paging system (max.10)
H Package contents
#MC-A/A holds max. 6 blocks of 10 MC-60/4A's. e Market-Com station
| (MC-60/4A or MC-60/4B)
e Package of screws
e Installation 8: Operation Manual
E Components available
MC-60/4A MC-60/4B MC-A/A PS-24N
Wall-mount Desk use Market-com adaptor Power supply
e For MC-60/4A;
MCS-12: 12” checkstand pedestal (US only)
MCS-23: 23” checkstand pedestal (US only)
MC-S6: Desk stand for MC-60/4A (1 pce per MC-60/4A as required)
® For paging & music;
PG-20C: Paging amplifier, 20W, wall mount with built-in paging adaptor (US only)
PG-50C: Paging amplifier, 50W, wall mount with built-in paging adaptor (US only)
PG-100C: Paging amplifier, 100W, wall mount with built-in paging adaptor (US only)
SP-5N: — Ceiling speaker, 70V, 4W (US only)
SSB-2: Ceiling support bracket for SP-5N
AH-16TN: Horn speaker, 70V, 16W (US only)
AH-32TN: Horn speaker, 70V, 32W (US only)
Ш Features
2 PAGE button
3 Channel occupied LED (4)
Ch.1...... Red
Ch.2...... Green
Ch.3...... Yellow
Handset cradle
Channel selector button (4)
Jack (4 cond.)
O) сл
1 Terminal box w/1.5m, ,5” cord
> 2 Channel occupied LED (4)
Ch.1...... Red
Ch.2...... Green
Ch.3...... Yellow
3 Channel selector button (4)
Max. 60 stations per system
4 communication channels |
Easy-to-run 7 conductor cable throughout the system, wired in blocks
of up to 10 stations per block from adaptor/amplifier
llluminated LED indicates which channel is being used
Conference calling for up to 3 stations
Background music can be incorporated
Automatic music muting during announcement
Phone style coil cord with reinforced jacks (MC-60/4A)
Durable handset cradle
* Do not attempt to install or connect wires on MC-60/4 equipment while system’s power supply is turned
* MC-60/4 masters and related equipment are designed for indoor use only. Do not install outdoors.
% Do not connect any other power source than specified on terminals 1/+ and 5/—.
Doing so can damage the MC-60/4 equipment.
* Do not open any MC-60/4 system components. Ask qualified personnel.
% All the products of other manufacturers, power supply, buzzer, etc. used for MC-60/4 are not within our warranty,
and must be used under manufacturer or distributor's specifications and warranty.
* Do not mount MC-60/4 equipment in the following places, as it may cause the system to malfunction:
e High or extreme cold temperature areas: under direct sunlight, near equipment that varies in temperature, near
an air-conditioner, inside refrigerating warehouse, etc.
e Places subject to moisture or humidity extremes.
e Places subject to environmental conditions, such as dust, oil and chemicals, etc.
* MC-60/4 is an electrical appliance, which must not be subjected to water and or any other liquid.
* Weather conditions, such as lightning storms, may cause damage to MC-60/4 equipment. It is suggested to take
protective measures as follows;
e When a DC power supply is used:
On the power supply with grounding terminal, be sure to take the terminal to earth ground.
In this case, it is not necessary to connect a surge-arrester.
e |f no grounding terminal is available, install the SA-1 surge arrester on the power supply line.
E Before MC-60/4 is actually installed, the contents of this Manual must be thoroughly read and understood.
E Actual Terminal Location
Connect all number terminals in parallel from station to
a station.
9 1 Power supply (+24V DC)
О 1e] 2 Paging signal
= 3 Talk channel 2
4 Talk channel 1
5 Power supply (-24V DC)*
6 Talk channel 3
= 7 Talk channel 4
\ a | * When more than 7 conductor cable is used, connect extra
wires on 5 terminal to avoid crosstalk.
Terminal box
I inside view
inside view
Ш Wiring diagram
Paging SP.
À A = =
00 7 EN 7 [41 7 [4) 7 [67
С 7 © © | Г
Music source i | A \ |
7 7 7 Al 7
| 7
MC-60/4B i т \ i
MC-A/A MC-A/A is built into PG-C amp.
a Paging Amp.
PG-10A, etc.
A Paging speakers
Shielded AT ee >
AC 29 | HU KM UN - Mi | Shielded E A |
Music source AC E
OUTPUT lines well separated.
If run closely together, 1st phone block (up to 10 stations)
feedback may occur.
Power Supply ---}--------
* Taking GND to earth may :
help to avoid noise during
2nd phone block MC-60/4A
Up to 6 blocks
* When using PG-C Amplifiers;
MC-60/4 PG-C
1 8
2 7
5 9
3 } Music cond.
> ) Tel/Mic Paging
* Set dip switch 7 to ON position and switch 8 to OFF position.
Mounting guidelines The MC-60/4A is designed for wall or pedestal mounting only.
1. Loosen screw on the bottom of the front case, and remove the unit by
sliding the front case upward from the back chassis, then pull away.
Disconnect the intercom from the back chassis by unplugging the multi-pin
connector. Do not force the unit open. (Set the intercom unit aside while
making wire terminations so as not to mar or scratch the unit.)
2. Install the back chassis to a single gang box or mounting ring, or directly to
the wall.
3. All wiring terminations are done on the back chassis directly onto the
screw terminal section. Designate a color code for wire numbers 1-7, and
connect wires accordingly. Connect all like terminals together with
matching wires.
4. Wiring is done in a daisy-chained method with up to 10 stations on a run.
5. When wiring is completed, reattach the intercom to the back chassis by
plugging in the multi-pin connector. Align from the top and slide downward
into position. Tighten screw at the bottom of the front case.
MC-60/4A MC-60/4B
Handset Front case Chassis Single-gang
Cable protector
Terminal box
') terminal
Screw(2) or
wood screw(2) Go
to wall surface
jack XX Install terminal box and cable in
non-trapping manner.
When an LED at the top of the station is lit, that channel is in use. Select another channel that is not in
use. When any one station has a channel selected, the corresponding LED will be lit on all other
stations. If responding to a call, select the station number that was requested by the person paging.
@ Calling Select the channel number (1-4). Page & request a
person to join in on a selected channel. Release
PAGE button and wait for reply.
@ When being paged Go to the nearest MC-60/4 station, and select the
channel you were requested on.
Oe Conference calling Call for up to 2 persons to a conference call on your
selected channel. If more than 3 people join in,
communication volume may be affected.
@® Music muting When a station starts paging, pretone will sound and "9"
the music will be muted. When the page is completed,
the music will return.
% Firmly depress channel number button in every operation.
* Make wiring blocks in a manner that wiring length of any two blocks added together does not exceed 1,700’ w/ 22AWG either.
Fig.1 System w/ single block Fig.2
* The MC-60/4 is rated to operate at temperatures between 0°C ~ +40°C (32°F ~ 104°F).
* Clean the MC-60/4 equipment with a soft cloth dampened with neutral household cleanser.
Never use any abrasive cleaner or cloth.
* Power source:
* Consumption:
* Calling:
* Communication:
* Talk channel:
* Station capacity:
* Wiring:
* Dimensions:
* Weight:
* Wiring distance:
DC24V. Use PS-24N power supply
Max. 70mA (in paging mode)
By paging
Enters each channel after pressing a channel selector button.
4 channels
Max. 60 stations (in 6 blocks each with 10 MC-60/4 stations max. per block)
7 conductors in loop (do not use twisted paired cable)
Use specified type No. 852207 (USA only), 420172 or line capacitance rating less than 25pF/feet.
MC-60/4A: 9-1/4"H x 3-1/2"W x 3-1/2"D; 235H x 90W x 90D(mm)
MC-60/4B: 4”H x 8-7/8”W x 7-1/2"D; 102H x 225W x 190D(mm)
MC-60/4A: 1.06 Ibs. (480g)(approx.). MC-60/4B: 2.65 Ibs. (1.2kg)(approx.).
e Max. distance from MC-A/A to farthest MC-60/4 of a block (d1 in above Fig. 1)
24AWG | 22AWG | 18AWG 0.5mmg | 0.65mmg | 1.0mm $
1,000” 1,700’ 4,000’ 300m 500m 1,200m
Also applies to farthest MC-60/4’s of different blocks (d2 in above Fig.2)
% Total wiring distance must not exceed 5,000°(1,500m) per system, regardless of wire size.
Total wiring distance is the total length of all wiring blocks added together.
e From MC-A/A to power supply PS-24N
18AWG 0.5mm
32’ 10m
sie ole oe ole ole ofa ole ole fo ole ols oie ato efe ota ota ato eto ato oe ole ste ole ole ole ole ole ole ols ole ole ole ole ole ole efe ojo ato ato ato ota ota ota ajo ato ate eto ate efe ato ote ate ote elo efe eto eto ote efe eto ole ale ale ale
Aiphone Co., Ltd., Nagoya, Japan
Aiphone Corporation, Bellevue, WA, USA <>
MC-60/4-I(E) 0496D
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a
period of one year after delivery to the ultimate user and will repair free of charge or replace at no charge, should it
become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself
the sole right to make the final decision whether there is a defect in materials and/or workmanship; and whether or not the
product is within the warranty.
This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in
violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This
warranty does not cover batteries or damage caused by batteries used in connection with the product.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by
Aiphone will not be responsible for any costs incurred involving on site service calls.
ode edo eta ote ata ojo ode fa of ole ole ole elo efe de odo slo a ole ole fo ote aña ote ole oe ole ada ajo efe edo efe ato ojo ato aja ojo ato ojo oje ojo ote aja ojo ata ajo efe aja ojo ole ole ole fa efe fa efe ato efe fa fo ojo ab
Printed in Japan (E)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF