Alamo | Brahma 02968822P | User's Manual | Alamo Brahma 02968822P User's Manual

BOOM ARM MOWER
Rev 08-07
PART'S MANUAL
Part No. 02968822P
An Operator's Manual was shipped with the equipment in the Manual
Canister. This Operator's Manual is an integral part of the safe operation of
this machine and must be maintained with the unit at all times. READ,
UNDERSTAND, and FOLLOW the Safety and Operation Instructions
contained in this manual before operating the equipment. If the Operator's
Manual is not with the equipment, contact your dealer or Servis-Rhino (800446-5158) to obtain a Free copy before operating the equipment.
ALAMO INDUSTRIAL
1502 E. Walnut
Seguin, Texas 78155
210-372-3551
®
®
© 2007 Alamo Group Inc.
TO THE OWNER/OPERATOR/DEALER
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who
recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to
be used with all its safety equipment properly attached to minimize the chance of accidents.
BEFORE YOU START!!
Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
DANGER
FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTIONS CAN CAUSE
SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA.
1.
2. NO RIDERS, NO CHILDREN
OPERATORS.
AL
ANU
REA
D
M
3. USE SAFETY SHOES,HARD
HAT, SAFETY GLASSES,
SEAT BELTS, & ROPS.
4. BLOCK UP SECURELY
BEFORE WORKING UNDER.
RED
1. Study and understand Operator's Manuals, Safety Signs, and Instructional Decals for tractor & flail mower to prevent
misuse, abuse, & accidents. Practice before operating mower in a confined area or near passersby.
Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children.
2. Allow no children on or near implement of tractor. Allow no riders on tractor or implement. Falling off can cause
serious injury or death from being runover by tractor or mower or contact with Flail Mower Blades.
3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seatbelt fastened securely and
snugly to prevent injury and possible death from falling off or tractor overturn. Personal Protective Equipment such as
Hard Hat, Safety Glasses, Safety Shoes, and Ear Plugs are recommended.
4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working
underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of
controls. Make certain that area is clear before lowering or folding.
5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding
implements. Slowdown when turning and on hillsides.
Install
*Restrictor
in folding circuit to slow down lowering and unfolding if action is faster than is desirable.
6. Make certain that SMV sign, Warning Lights, and Reflectors are clearly visible. Follow local traffic codes.
7. Never operate with Flail Mower or Folding Section raised if passersby, bystandards or traffic are in the area to reduce
possibility of injury or death from objects thrown by Blades under Shields or implement structure.
8. Before dismounting, secure flail mower in transport position or lower to ground.
Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased
to prevent entanglement in rotating parts which may cause injury or death.
Never mount or dismount a moving vehicle. Crushing from runover may cause injury or death.
5. TRANSPORT SAFELY,
LOCK UP.
*
6. USE SMV, LIGHTS, &
REFLECTORS.
7. DO NOT OPERATE WITH
MOWER OR WING RAISED.
8. DO NOT MOUNT OR
DISMOUNT WHILE MOVING.
RED
002369
WARRANTY INFORMATION:
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form
in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card
and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause
catastrophic failure with possible injury or death.
PARTS
SECTION
Parts Section – 1
PARTS ORDERING GUIDE
The following instructions are offered to help eliminate needless delay and error in
processing purchase orders for the equipment in this section.
1. The Parts Section is prepared in logical sequence and grouping of parts that belong to
the basic machine featured in this manual. Part Numbers and Descriptions are given to
help locate the parts and quantities required.
2. The Purchase Order must include the name and address of the person or organization
ordering the parts, who should be charged, and if possible, the serial number of the machine
for which the parts are ordered.
3. The Purchase Order must clearly list the quantity of each part, the complete and correct
part number (be sure to include all periods), and the basic name of the part.
4. The Manufacturer reserves the right to substitute parts where applicable.
5. Some parts are unlisted items which are special production items not normally stocked
and are subject to special handling. Request a quotation for such parts before sending a
Purchase Order.
6. The Manufacturer reserves the right to change prices without prior notice.
NOTE:
Please refer to The Safety Section in the front of this Manual for the proper
Part Number when ordering Replacement Safety Decals.
For maximum safety and to guarantee optimum product reliability, always use
genuine Servis-Rhino Parts. The use of inferior replacement parts may cause
premature or catastrophic failure which could result in serious injury or death.
Direct any questions regarding parts to:
ALAMO INDUSTRIAL
1502 E. Walnut
Seguin, Texas 78155
830-379-1480
©2007 Alamo Group Inc.
®
®
Parts Section – 2
PART NAME INDEX
BEARING ASY - 1500 FLAIL HEAD......................................................................................................................................................... 4
BEARING ASY - 2000 FLAIL HEAD......................................................................................................................................................... 5
BLADE CARRIER ASY - BAR PN 02965737............................................................................................................................................ 6
BLADE CARRIER ASY - PAN PN 02964456 ............................................................................................................................................ 7
CHAIN GUARD ASY - FRONT (DEEP DECK) PN 02965797 ................................................................................................................. 8
COMMON BOX PARTS PN 02969093..................................................................................................................................................... 10
CONTROL VALVE ASY PN 02969613 SN 01241 (05-06) & DOWN.................................................................................................... 12
CONTROL VALVE ASY PN 02981363 SN 01242 (06-06) & UP ........................................................................................................... 14
CYLINDER ASY - LIFT ............................................................................................................................................................................ 16
CYLINDER ASY - TILT............................................................................................................................................................................ 17
FLAIL HEAD ASY PN 02968984 - 60 INCH PART 1 ............................................................................................................................ 18
FLAIL HEAD ASY PN 02968984 - 60 INCH PART 2 ............................................................................................................................. 20
FLAIL HEAD SUB-ASY 1500................................................................................................................................................................... 22
FLAIL HEAD SUB-ASY 2000................................................................................................................................................................... 24
GAUGE WHEEL - SIDE PN 02966070 (OPTIONAL) ............................................................................................................................. 26
HYDRAULIC TANK SUB-ASY PN 02981211 ........................................................................................................................................ 27
MOTOR & SPINDLE ASY PN 02969096 ................................................................................................................................................. 28
MOTOR ASY - FLAIL HEAD................................................................................................................................................................... 30
MOUNTING ARM ASY PN 02979631 ..................................................................................................................................................... 32
OIL RESERVOIR ASY PN 02968168 ....................................................................................................................................................... 34
PULLEY ASY - FLAIL HEAD 1500 & 2000............................................................................................................................................ 36
ROLLER ASY - FLAIL HEAD 1500 & 2000............................................................................................................................................ 37
ROLLER ASY - ROTARY HEAD (OPTION) .......................................................................................................................................... 38
ROTARY HEAD - MOTOR ASY (PARTS) - PN 02979881 PART 1 ...................................................................................................... 40
ROTARY HEAD - MOTOR ASY (PARTS) - PN 02979881 PART 2 ...................................................................................................... 42
ROTARY HEAD ASY................................................................................................................................................................................ 44
ROTARY HEAD ASY (NEW STYLE) ..................................................................................................................................................... 46
ROTARY HEAD PRE-ASY (NEW STYLE)............................................................................................................................................. 48
ROTARY HEAD SUB-ASY ...................................................................................................................................................................... 50
ROTOR SHAFT ASY - FLAIL HEAD 60 INCH ...................................................................................................................................... 52
ROTOR SHAFT ASY - FLAIL HEAD 80 INCH ...................................................................................................................................... 53
SERVO CONTROLLED PISTON PUMP ASY PN 02969527A PART 1 ................................................................................................ 54
SERVO CONTROLLED PISTON PUMP ASY PN 02969527A PART 2 ................................................................................................ 56
SPINDLE & HOUSING ASY PN 02960553B........................................................................................................................................... 58
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -3
BEARING ASY - 1500 FLAIL HEAD
ITEM
PART NO. QTY.
DESCRIPTION
1
02.824.01
2
WASHER
2
05.264.23
10
SETSCREW
3
05.264.25
4
SETSCREW
4
05.282.03
12
SPRING WASHER
5
05.283.03
2
SHAKEPROOF WASHER
6
05.286.03
10
NUT
7
05.345.05
4
SOCKET CSK SCREW
8
06.219.01
2
DISC-SHIELD
9
06.221.01
2
BEARING ASY. ( DRIVE OR NON-DRIVE END )
10
09.584.01
1
BEARING PLATE-NON DRIVE
11
09.585.01
1
ADJUSTING-BOLT
12
09.586.01
1
BEARING PLATE-DRIVE END
13
09.588.01
1
GUARD - NON DRIVE
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -4
BEARING ASY - 2000 FLAIL HEAD
ITEM
PART NO. QTY.
DESCRIPTION
1
04.163.04
2
BEARING
2
04.252.01
2
WASHER
3
05.282.03
8
SPRING WASHER
4
05.286.03
10
NUT
5
05.283.04
2
WASHER
6
05.264.23
4
SETSCREW
05.264.24
4
SETSCREW
7
05.264.33
2
SETSCREW
8
05.953.03
2
GREASE NIPPLE
9
05.959.07
4
CIRCLIP
10
06.909.01
4
SEAL
11
06.910.01
4
COLLAR
12
09.585.01
1
ADJUSTING BOLT
13
41456.01
1
HOUSING
41457.01
1
HOUSING
41461.01
1
GUARD
14
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -5
BLADE CARRIER ASY - BAR PN 02965737
ITEM
PART NO. QTY.
DESCRIPTION
02965737
1
BLADE BAR ASY
1
00747900
2
HEX NUT
2
00748000
2
HEAVY LOCKWASHER
3
00752827
2
BLADE BOLT ( TORQUE TO 600 FT LBS )
4
02965579
1
BLADE BAR WLD’MT
5
02966262
1
BLADES ( MATCHED SET )
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -6
BLADE CARRIER ASY - PAN PN 02964456
ITEM
PART NO. QTY.
DESCRIPTION
02964456
1
BLADE PAN ASY. W/ BLADES
1
00020900
3
SLOTTED NUT
2
00023200
3
ROLL PIN
3
00755623
3
WASHER
4
02964330
3
KEYED BLADE BOLT ( TORQUE TO 600 FT LBS )
5
02964804
1
BLADE PAN ASY. W/O BLADES
6
02964815
3
BLADE BOLT BUSHING
7
02964954
3
KEY
8
02964960
1
BLADES ( MATCHED SET )
9
02965229
3
WEAR WASHER
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -7
CHAIN GUARD ASY - FRONT (DEEP DECK) PN 02965797
ITEM
PART NO. QTY.
DESCRIPTION
1
00001000
4
CABLE CLAMP
2
00751127
71
CHAIN 5/16 WLD 8 LINK ZINC PL
3
00992000
11
CABLE, 1/4 GA AIRCRAFT (7X19)
4
02979119
1
BRKT,CHAIN GUARD DEEP DECK
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -8
THIS PAGE INTENTIONAL LEFT BLANK
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -9
COMMON BOX PARTS PN 02969093
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -10
COMMON BOX PARTS PN 02969093
ITEM
PART NO. QTY.
DESCRIPTION
02969093
1
COMMON BOX, BRAHMA
1
00001300
2
LOCKWASHER
2
00001800
8
LOCKNUT
3
00002700
8
FLATWASHER
5
00750940
3
NUT
6
00016300
3
BOLT
7
002369
1
DECAL, DANGER MULTI-HAZARD - FLAIL
02967827
1
DECAL, DANGER MULTI-HAZARD - ROTARY
8
00725336
2
STRAP
9
00725337
2
PIN
10
00725338
2
COTTER PIN
11
00725746
1
DECAL, SPANISH TRANSLATION
12
00726119
2
BRASS WASHER, SPECIAL
13
00748823
2
BOLT
14
00750940
6
LOCKNUT
15
00763504
1
ALAMO, WARRANTY CARD
16
02027400
6
BOLT
17
02776600
2
BOLT
18
02963201
1
DECAL, AG LOGO
19
02964028
1
PUSH-PULL SWITCH
20
02964063
1
SWITCH KNOB
21
02965093
1
DECAL, PROPER ENGINE RPM
22
02965262
1
DECAL, WARNING HOSE BURST
23
02979473
1
DECAL, AW ISO VG100 TRACTER HYD.FLUID
24
02966634
1
BUMPER WLD’MT
25
03200437
1
DECAL, PRESSURIZED TANK
26
02981212
1
OIL RESERVOIR ASY - BRAHMA
27
02968822
1
PARTS & OPERATORS MANUAL
28
02969032
1
TANK & PUMP COVER WLD’MT
29
02969128
1
DUAL AXIS - JOYSTICK
29A
02974119
1
BALL JOINT PIVOT - PLASTIC BALL (NOT SHOWN ))
29B
02974120
1
BALL JOINT PIVOT - DIE CAST METAL (NOT SHOWN )
30
02971274
2
CABLE CONNECTION KIT
31
02970204
1
PUMP SOLENOID - WIRE HARNESS (INCLUDES ITEM 32)
32
02969741
1
FUSE (REFERENCE ONLY)
33
02981363
1
2 SPOOL VALVE ASY - BRAHMA
34
02969646
1
DECAL, NAME BRAHMA
35
02969666
1
DECAL, JOYSTICK INSTRUCTIONS
36
02733700
3
BOLT
37
00023500
9
FLATWASHER
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -11
CONTROL VALVE ASY PN 02969613 SN 01241 (05-06) & DOWN
ITEM
PART NO. QTY.
DESCRIPTION
02981363
1
CONTROL VALVE ASY
1
02962249
3
ADAPTER, HYD ELBOW
2
02967150
1
ADAPTER, HYD TEE
3
02967151
1
ADAPTER, HYD STRAIGHT
4
02968828
1
TIE, PLASTIC 4"LG - RED
5
02968830
1
TIE, PLASTIC 4"LG - BLUE
6
02968831
1
TIE, PLASTIC 4"LG - BLUE/WHITE
7
02968832
1
TIE, PLASTIC 4"LG - GREEN
8
02968833
1
TIE, PLASTIC 4"LG - GREEN/WHITE
9
02968834
1
TIE, PLASTIC 4"LG - ORANGE
10
02969131
1
DIRECTIONAL CONTROL VALVE
11
63042700
2
ADAPTER, HYD STRAIGHT
12
02969399
1
RESTRICTOR-ORFICE, ONE WAY
13
02972159
1
ADAPTER, HYD ELBOW
14
02979336
1
INLET
15
02979337
1
DOUBLE ACTION FLOAT
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -12
CONTROL VALVE ASY PN 02969613 SN 01241 (05-06) & DOWN
Continued...
ITEM
PART NO. QTY.
DESCRIPTION
16
02979338
1
SINGLE ACTION
17
02979339
1
OUTLET COVER
18
02979340
3
STUD ASY.
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -13
CONTROL VALVE ASY PN 02981363 SN 01242 (06-06) & UP
ITEM
PART NO. QTY.
DESCRIPTION
02981363
1
CONTROL VALVE ASY.
1
02962249
3
HYD. ADAPTER ELBOW
2
02967150
1
HYD. ADAPTER TEE
3
02967151
1
HYD. ADAPTER STRAIGHT
4
02968828
1
PLASTIC TIE 4"LG - RED
5
02968830
1
PLASTIC TIE 4"LG - BLUE
6
02968831
1
PLASTIC TIE 4"LG - BLUE/WHITE
7
02968832
1
PLASTIC TIE 4"LG - GREEN
8
02968833
1
PLASTIC TIE 4"LG - GREEN/WHITE
9
02968834
1
PLASTIC TIE 4"LG - ORANGE
10
02980906
1
DIRECTIONAL CONTROL VALVE
11
63042700
2
HYD. ADAPTER STRAIGHT
12
02969399
1
ONE WAY RESTRICTOR-ORFICE
13
02972159
1
HYD. ADAPTER ELBOW
14
02962596
1
DETENT CAP 02908600 VALVE
15
02984398
1
VALVE SECTION TILT
16
02958734
1
SPOOL POSITIONER KIT 4-POS DET
17
02750100
1
DETENT KIT
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -14
CONTROL VALVE ASY PN 02981363 SN 01242 (06-06) & UP
Continued...
ITEM
PART NO. QTY.
DESCRIPTION
18
02984421
1
VALVE SECTION LIFT
19
02046700
1
VALVE END PLATE
20
02884397
1
MAIN RELIEF - 3000 PSI
21
02984396
1
VALVE SECTION-INLET COVER
22
02918400
2
VALVE HANDLE FROM 02908600
23
02966875
2
VALVE HANDLE CONNECTION KIT
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -15
CYLINDER ASY - LIFT
ITEM
PART NO. QTY.
DESCRIPTION
02968032A
1
HYD. LIFT CYL.( 10-1/2" STROKE )
1
02975531
1
SEAL KIT
2
02975464
1
TUBE WLD’MT ( LIFT CYL. )
3
1917155
1
LOCKNUT
4
02975456
1
PISTON
5
02975458
1
ROD WLD’MT ( LIFT CYL. )
6
02975449
1
HEAD GLAND ( LIFT CYL. )
7
02968803
2
BUSHINGS
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -16
CYLINDER ASY - TILT
ITEM
PART NO. QTY.
DESCRIPTION
02968024A
1
HYD. TILT CYL. ( 12-13/16" STROKE )
1
02975531
1
SEAL KIT
2
02975550
1
TUBE WLD’MT ( TILT CYL. )
3
1917155
1
LOCKNUT
4
02975456
1
PISTON
5
02975549
1
ROD WLD’MT ( TILT CYL. )
6
02975459
1
HEAD GLAND ( TILT CYL. )
7
02968803
2
BUSHINGS
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -17
FLAIL HEAD ASY PN 02968984 - 60 INCH PART 1
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -18
FLAIL HEAD ASY PN 02968984 - 60 INCH PART 1
ITEM
PART NO. QTY.
DESCRIPTION
02968984
1
HEAD ASY, 60" FLAIL ( 1500 HEAD )
02968985
1
HEAD ASY, 80" FLAIL ( 2000 HEAD )
1
NFS
1
SERIAL PLATE - BRAHMA
2
000108
1
DECAL, OPERATING INSTRUCTIONS , FLAIL
3
02969464
1
ADAPTER REDUCER
4
02979128
1
PRESSURE HOSE ( RED )
5
02979127
1
RETURN HOSE, W/90 DEG ELBOW ( ORANGE )
6
02970705
1
CASE DRAIN HOSE ( BLUE )
7
002369
1
DECAL, MULTI-HAZARD FLAIL
8
00015800
2
LOCKNUT
9
00059900
2
BOLT
10
00695100
10
LOCKNUT
11
00725739
1
DECAL, USE REPAIR SHIELDS / GUARDS
12
00725746
1
DECAL, SPANISH, TRANSLATE SAFETY MATERIAL
13
00756059
1
DECAL, DANGER OIL LEAK
14
00757139
1
DECAL, ALAMO GROUP ( 5X19 )
15
00758194
1
DECAL, PINCH POINT V-BELT
16
02845500
10
HEX BOLT
17
02962764
2
DECAL, PINCH POINT SCISSORS
18
02967668
1
DECAL, CUTTING BLADES / THROWN OBJECTS , FLAIL
19
02976663
1
CLAMP PLATE
20
02968274
1
MOWER HEAD MOUNT PIN
21
02976694
1
MOWER HEAD MOUNT WLD’MT
22
02968561
1
HEAD LINK PIN WLD’MT
23
02968896
3
PLASTIC TIE - ORANGE
24
02968894
3
PLASTIC TIE - RED
25
02968895
3
PLASTIC TIE - BLUE
26
02969647
1
DECAL, BRAHMA 30"
27
02969648
1
DECAL, BRAHMA PICTURE
28
03200432
1
DECAL, USE GENUINE PARTS FLAIL
29
3710151
4
METAL TACK
30
8301295
1
PISTON MOTOR - INCLUDES THE FOLLOWING :
30A
02964954
1
MOTOR KEY (REFERENCE ONLY)
31
90.162.12
1
FLAIL HEAD - INCLUDESTHE FOLLOWING (5 ITEMS)
72.736.01
1
BEARING ASY.
72.740.02
1
ROLLER ASY. 1500
72.753.01
1
ROTOR SHAFT ASY. 1500
76.114.01
1
COWL ASY. 1500
76.154.01
1
MOTOR,PULLEY & BELT ASY.
90.282.12
1
FLAIL HEAD 2000 * - INCLUDES THE FOLLOWING ( 5 ITEMS )
76.115.01
1
MOTOR,PULLEY & BELT ASY.
76.117.01
1
COWL ASY 2000
76.118.01
1
BEARING ASY
31A
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -19
FLAIL HEAD ASY PN 02968984 - 60 INCH PART 2
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -20
FLAIL HEAD ASY PN 02968984 - 60 INCH PART 2
ITEM
PART NO. QTY.
DESCRIPTION
76.119.01
1
ASY,ROTOR SHAFT 4934
76.155.01
1
ASY,ROLLER 2000 4934
32
02957622
1
ADP HYD STGHT 16MB-16MJ
33
02962213
1
ADP HYD ELBOW 8MB - 8MJ 90°
34
02090900
1
ADP HYD ELBOW 16MB-16MJ90
35
02961085
1
CORDURA SLEEVING-54 LG
36
02775500
3
PLASTIC TIE 21 LG.
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -21
FLAIL HEAD SUB-ASY 1500
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -22
FLAIL HEAD SUB-ASY 1500
ITEM
PART NO. QTY.
DESCRIPTION
1
05.201.17
2
TENSION PIN
2
05.264.21
3
SETSCREW
3
05.264.23
10
SETSCREW
4
05.264.24
6
SETSCREW
5
05.281.03
5
FLATWASHER - PLATED
6
05.281.04
6
FLATWASHER - PLATED
7
05.282.01
12
SPRING WASHER - PLATED
8
05.282.03
20
SPRING WASHER - PLATED
9
05.286.01
16
PLATED NUT
10
05.286.03
17
PLATED NUT
11
05.287.02
6
SELF - LOCKING NUT
12
05.839.24
6
BOLT CUP SQUARE
13
09.589.01
1
TOP DRIVE, GUARD
14
09.590.01
1
BOTTOM DRIVE, GUARD
15
09.594.02
2
BACKING STRIP - 1500
16
09.595.02
1
FLEXIBLE GUARD - 1500
17
41418.01
2
CLAMP GUARD
18
41424.01
1
FLEXIBLE GUARD - 1500
19
41425.01
1
COWL - 1500
20
41429.01
1
FRT FIXED GUARD - 1500
21
41430.01
1
FRT ADJ GUARD - 1500
22
41436.01
2
FRT GUARD - PIVOT SPACER
23
41438.01
1
FRT GUARD - PIVOT PIN
24
9293054
12
BOLT CUP SQUARE
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -23
FLAIL HEAD SUB-ASY 2000
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -24
FLAIL HEAD SUB-ASY 2000
ITEM
PART NO. QTY.
DESCRIPTION
1
05.201.17
2
TENSION PIN
2
05.264.21
3
SETSCREW
3
05.264.23
10
SETSCREW
4
05.264.24
6
SETSCREW
5
05.281.03
5
FLATWASHER - PLATED
6
05.281.04
8
FLATWASHER - PLATED
7
05.282.01
16
SPRING WASHER - PLATED
8
05.282.03
20
SPRING WASHER - PLATED
9
05.286.01
16
PLATED NUT
10
05.286.03
17
PLATED NUT
11
05.287.02
8
SELF - LOCKING NUT
12
05.839.24
8
BOLT CUP SQUARE
13
09.589.01
1
TOP DRIVE, GUARD
14
09.590.01
1
BOTTOM DRIVE, GUARD
15
41.237.01
2
BACKING STRIP - 2000
16
41.063.01
1
FLEXIBLE GUARD - 2000
17
41418.01
2
CLAMP GUARD
18
41452.01
1
FLEXIBLE GUARD - 2000
19
41445.01
1
COWL - 2000
20
41453.01
1
FRT FIXED GUARD - 2000
21
41454.01
1
FRT ADJ GUARD - 2000
22
41436.01
2
FRT GUARD - PIVOT SPACER
23
41444.01
1
FRT GUARD - PIVOT PIN
24
9293054
16
BOLT CUP SQUARE
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -25
GAUGE WHEEL - SIDE PN 02966070 (OPTIONAL)
ITEM
PART NO. QTY.
DESCRIPTION
02966070
1
GUAGE WHEEL, SIDE MOUNT, DEEP DECK
1
00001800
8
LOCKNUT
2
00606000
1
COTTERPIN
3
02892000
8
BOLT, HEX HEAD
4
02965675
1
PIN WLEDMENT
5
02966238
1
WHEEL MOUNTING WLEDMENT
6
373024D
1
HUB ASY.
7
373024H
1
WHEEL & TIRE ASY.
8
37302C2C
2
BUSHING
9
5DR12160
1
NUT, SLOTTED
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -26
HYDRAULIC TANK SUB-ASY PN 02981211
ITEM
PART NO. QTY.
DESCRIPTION
02981211
1
HYDRAULIC TANK SUB-ASY.
1
00001300
4
LOCKWASHER
3
00011800
4
BOLT
4
00751984
6
STARWASHER
5
02275700
1
PIPE TEE
6
02963659
1
MAGNETIC PLUG
7
02977040
1
TANK WLD’MT
8
02968166
1
SUCTION STRAINER
9
02968879
1
FILLER/BREATHER CAP ASY.
10
02968880
1
GAUGE, SIGHT & TEMP.
11
02969377
6
MACHINE SCREW, SLOTTED HEX
12
63081000
1
REDUCER BUSHING
13
00011700
2
LOCKWASHER
14
10119000
2
LOCKWASHER
15
00023500
4
FLATWASHER
16
00750940
2
LOCKNUT
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -27
MOTOR & SPINDLE ASY PN 02969096
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -28
MOTOR & SPINDLE ASY PN 02969096
ITEM
PART NO. QTY.
DESCRIPTION
02969096
1
MOTOR & SPINDLE ASY.
1
00019600
4
LOCKWASHER
2
00750316
2
HYD. ADAPTER ELBOW
3
00750317
2
SPLIT FLANGE KIT
4
--------------
1
GREASE NLGI "000" ( NOT SHOWN , SEE MAINTENCE SECTION ) (REFERENCE ONLY)
5
02776600
4
BOLT
6
02958782
1
HYD. ADAPTER STRAIGHT
7
02960553B
1
SPINDLE HOUSING - SPINDLE ASY.(SEE SPINDLE HOUSING & SPINDLE ASY.)
8
02961038
1
SPINDLE / MOTOR - GASKET
9
02967193B
1
PISTON MOTOR ASY
02967193RB
1
PISTON MOTOR ASY ( REBUILT UNIT ) (REFERENCE ONLY)
02972094
1
SEAL KIT, VALVE BLOCK TO MOTOR
02971574
1
RELIEF CARTRIDGE, 4000 PSI
02981685
1
O-RING ( F/ 02971574 )
02981686
1
O-RING ( F/ 02971574 )
02981687
1
O-RING ( F/ 02971574 )
02981688
2
BACK-UP RING ( F/ 02971574 )
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -29
MOTOR ASY - FLAIL HEAD
ITEM
PART NO. QTY.
DESCRIPTION
1
8301295
1
PISTON MOTOR, 2.48 CU.IN./REV W/O FITTINGS
2
05.960.16
1
KEY
3
8600908
1
O-RING GASKET
4
03.198.01
1
HYD. ADAPTER
5
8581338
1
HYD. ADAPTER
6
05.835.02
2
HYD. ADAPTER
7
08.955.25
2
HYD. ADAPTER
8
8600916
2
O-RING GASKET
9
8699238
1
SEAL KIT ( FOR P/N 8301295 MOTOR )
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -30
THIS PAGE INTENTIONAL LEFT BLANK
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -31
MOUNTING ARM ASY PN 02979631
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -32
MOUNTING ARM ASY PN 02979631
ITEM
PART NO. QTY.
DESCRIPTION
02979631
1
MOUNTING ARM ASY, BRAHMA
1
00013900
1
BOLT
2
00059900
5
BOLT
3
00015800
5
LOCKNUT
4
02968803
8
TEFLON BEARING
5
00764656
2
TEFLON BEARING
6
02890900
4
HOSE - 47"LG
7
02919400
3
BULKHEAD FITTING - 45 DEG
8
02960018
4
FITTING - 90 DEG
9
02962764
3
DECAL, PINCH POINTS
10
02965262
1
DECAL, HOSE BURST
11
02966791
2
TEFLON BEARING IMPREG
12
02968023A
1
HYD. TILT CYL.( SEE LIFT &TILT CYL.)
13
02968024A
1
HYD. LIFT CYL.( SEE LIFT &TILT CYL.)
14
02985235
1
WLDMT, HEAD PIVOT
15
02968101
1
ARM BASE PIN
16
02968103
1
LINK BASE CYLINDER PIN
17
02979612
1
MACHINED ARM , BRAHMA
18
02979628
1
CYLINDER ROD PIN
19
02979620
1
MACHINED , CYLINDER LINK
20
02968197
1
CYLINDER ROD PIN
21
02979614
1
MACHINED , CYLINDER LINK
22
02979627
1
CYLINDER BASE PIN
23
02968830
3
PLASTIC TIE - BLUE
24
02968831
3
PLASTIC TIE - BLUE/WHITE
25
02968832
3
PLASTIC TIE - GREEN
26
02968833
3
PLASTIC TIE - GREEN/WHITE
27
02968896
1
PLASTIC TIE - ORANGE
28
02968895
1
PLASTIC TIE - BLUE
29
02968894
1
PLASTIC TIE - RED
30
3710151
4
METAL TACK
31
02960692
1
SERIAL PLATE - BRAHMA ARM
32
02275800
2
DOUBLE CLEVIS
33
00751685
1
HAIRPIN
34
02973792
1
CHAIN
35
15C2000
2
HARDENED WASHER 1-1/4"
36
02968274
1
PIN- MOWER HEAD MT.
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -33
OIL RESERVOIR ASY PN 02968168
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -34
OIL RESERVOIR ASY PN 02968168
ITEM
PART NO. QTY.
DESCRIPTION
02968168
1
OIL RESERVOIR ASY.
1
00002000
4
BOLT
2
00752067
1
STRAIGHT ADAPTER
3
02041800
1
ELBOW - 90DEG
4
02042300
1
STRAIGHT ADAPTER
5
02042400
1
STRAIGHT ADAPTER
6
02043600
2
ADAPTER - 45DEG
7
02822700
1
ELBOW - 90DEG
8
02969527
1
PUMP, FRONT-SERVO ( INCLUDES 02970206 SOLENOID SERVO CONTROL )
02969527RB
1
PUMP, FRONT-SERVO REBUILT (REFERENCE ONLY)
9
02968164
3
HOSE
10
02968165
1
HOSE
11
02968167
1
STRAIGHT ADAPTER
12
02968169
1
TANK SUB-ASY.
13
02968896
1
PLASTIC TIE - 11"LG ( ORANGE )
14
02968895
1
PLASTIC TIE - 11"LG ( BLUE )
15
02968894
1
PLASTIC TIE - 11"LG ( RED )
16
02968922
1
PRESSURE FILTER HEAD ASY.
17
02968923
1
PRESS FILTER ASY.
03101646
4
LOCKWASHER
18
03200587
1
PLUG
19
63042700
3
ADAPTER
20
02972836
1
COIL ASSY.
21
02972835
1
ASSY, CARTRIDGE VALVE W/O COIL
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -35
PULLEY ASY - FLAIL HEAD 1500 & 2000
ITEM
PART NO. QTY.
DESCRIPTION
76.154.01
1
PULLEY ASY. F/ 60" ( 1500 ) HEAD
76.115.01
1
PULLEY ASY. F/ 80" ( 2000 ) HEAD
1
03.795.02
2
PULLEY
2
04.282.17
2
STUD
3
05.281.03
2
WASHER
4
05.282.03
4
SPRING WASHER
5
05.286.03
4
NUT
6
05.424.02
1
TAPERLOCK
7
05.424.18
1
TAPERLOCK F/ 60" ( 1500 ) HEAD
05.424.17
1
TAPERLOCK F/ 80" ( 2000 ) HEAD
8
05.625.12
2
SCREW
9
05.960.16
1
BELT
10
05.960.16
1
KEY
11
09.587.01
1
COVER PLATE
12
41342.01
1
PLATE
13
02964954
1
MOTOR KEY (REFERENCE ONLY)
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -36
ROLLER ASY - FLAIL HEAD 1500 & 2000
ITEM
PART NO. QTY.
DESCRIPTION
1
09.898.01
1
LEFT BRKT ( NOT SHOWN )
09.898.02
1
RIGHT BRKT
2
05.959.05
4
CIRCLIP
3
03.007.02
2
BEARING ( CAN USE BRG P/N 42954.01 )
09.714.01
1
BEARING KIT COMPLETE ( BOTH SIDES ), ITEMS 3,4,5,6,7,8 & 9 (AS REQUIRED)
4
04.164.04
2
SEAL
5
41851.01
2
CAP
6
05.953.01
4
GREASE NIPPLE
7
05.234.01
2
WASHER
8
05.625.10
2
SOCKET HEAD BOLT
9
05.282.03
2
SPRING WASHER
10
42955.05
1
ROLLER - 60" ( 1500 ) HEAD
42955.07
1
ROLLER - 80" ( 2000 ) HEAD
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -37
ROLLER ASY - ROTARY HEAD (OPTION)
ITEM
PART NO. QTY.
DESCRIPTION
703262
1
ROLLER KIT, 62"
1
00001800
8
LOCKNUT
2
000516
8
CARRIAGE BOLT
3
107784
1
ROLLER
4
107380
1
RIGHT ROLLER MOUNT - WLD’MT
107182
1
LEFT ROLLER MOUNT - WLD’MT
5
002037
2
SEAL
6
703976
2
BEARING
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -38
THIS PAGE INTENTIONAL LEFT BLANK
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -39
ROTARY HEAD - MOTOR ASY (PARTS) - PN 02979881 PART 1
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -40
ROTARY HEAD - MOTOR ASY (PARTS) - PN 02979881 PART 1
ITEM
PART NO. QTY.
DESCRIPTION
02979881
1
MOTOR ASY, PISTON TYPE 4.91 CID
1
02980529
1
BARREL HOUSING ASY
2
02980530
1
VALVE PLATE
4
02980536
1
NOZZLE, 2.5
5
02980537
1
PLUG ASY, 7/8" HEXAGON
6
02980538
1
BEARING HOUSING
7
02980539
1
O-RING, 132 X 3
8
02980540
1
O-RING, 104.5 X 3
9
02980541
1
SEAL CARRIER
10
02980542
1
SHAFT SEAL
11
02980543
1
SPACER WASHER
12
02980544
1
RETAINING RING
13
02980545
1
RETAINING RING
14
02980546
1
SHAFT ASY, TYPE U
15
02980548
1
CYLINDER BARREL
16
02980549
1
BARREL SUPPORT
17
02980550
7
PISTON ASY
18
02980551
21
PISTON RING
19
02980552
1
RING GEAR
20
02980553
1
TAP ROL BEARING
21
02980554
1
BEARING, TAPERED ROLLER
22
02980555
1
SPACER WASHER (AS REQUIRED)
23
02980556
1
RETAINING RING
24
02980557
1
SHIM, 0.5 (AS REQUIRED)
02980558
1
SHIM, 0.2 (AS REQUIRED)
02980559
1
SHIM, 0.4 (AS REQUIRED)
02980560
1
SHIM, 0.6 (AS REQUIRED)
02980561
1
SHIM, 0.8 (AS REQUIRED)
02980562
1
SHIM, 1.0 (AS REQUIRED)
02980563
1
SHIM, 0.7 (AS REQUIRED)
25
02980564
4
BOLT, SOCKET HEAD M12 X 50 10.9
26
02980565
1
LOCKWASHER, M13 X 19.5
27
02980547
1
GUIDE PIN
28
02980571
1
RELIEF MANIFOLD
02980570
1
RELIEF VALVE, SEAL KIT (AS REQUIRED)
29
02980568
1
RELIEF VALVE, 280 BAR
30
02980569
1
RELIEF VALVE, 330 BAR
31
02980237
2
O-RING
32
02980531
1
KEY, FLAT
33
02980532
2
STEEL BALL
34
02980533
2
PLUG, HEXAGON
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -41
ROTARY HEAD - MOTOR ASY (PARTS) - PN 02979881 PART 2
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -42
ROTARY HEAD - MOTOR ASY (PARTS) - PN 02979881 PART 2
ITEM
PART NO. QTY.
DESCRIPTION
35
02980534
2
O-RING
36
02980535
2
PLUG ASY, HEX SOCKET
37
02980572
2
PLUG ASY
38
02980573
1
PLUG ASY
39
02980566
1
REBUILD KIT
40
02980567
1
SEAL KIT FOR 02979881 MTR
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -43
ROTARY HEAD ASY
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -44
ROTARY HEAD ASY
ITEM
PART NO. QTY.
DESCRIPTION
02969091
1
HEAD, ASY, 60 PAN DEP DEK
02969090
1
HEAD, ASY, BAR DEP DEK
1
00001800
6
LOCKNUT TLM 1/2 NC PLB
2
00002700
6
FLATWASHER 1/2 PL STD
3
00011100
22
FLATWASHER STD 3/8
4
00013900
1
HHCS 3/8 NC 2-1/2 PL5
5
00015800
13
LOCKNUT TLM 3/8-NC PLC
6
00023100
11
HHCS 3/8 -16UNC 1-1/2 PL5
7
00059900
1
HEXB 3/8 NC 3 PL5
8
001650
1
DECAL-ALAMO IND. LOGO
9
00725746
1
DECAL, PELIGRO
10
00756059
1
DECAL-WARNING OIL LEAK
11
00757140
1
DECAL,ALAMO INDUSTRIAL LOGO
12
00769736
1
DECAL,USE/REPAIR GUARDS
13
00769737
2
DECAL-BLADES THROWN OBJECTS
14
02030700
6
HHCS 1/2-13UNC 1-1/4 PL5
15
02753400
3
PLASTIC TIE-ON 15 LG
16
02885700
1
REAR FLAP 10 X 63 X 3/8 THK
17
02885800
1
REAR CLAMP BAR
18
02925100
1
DECAL-REPLACEMENT PARTS
19
02961085
1
CORDURA SLEEVING-54 LG
20
02962764
1
DECAL - PINCH POINTS
21
02965797
1
ASY,FRT CNGD 60VM DP DK
22
02967827
1
DECAL-MULTI HAZ
23
02968274
1
PIN- MOWER HEAD MT.
24
02984760
1
PIN 1-1/4
25
02969094
1
PRE-ASSEMBLY-60ROTARY /BAR
02969095
1
PRE-ASSEMBLY-60ROTARY /PAN
26
02969645
1
PLATE,S/N - BRAHMA ROTARY
27
02969647
1
DECAL,NAME--BRAHMA 30(BLACK)
28
02969648
1
DECAL,PICTURE - BRAHMA (BLACK)
29
02969677
1
HOSE #16-16FJX -16FJX - 68LG
30
02969678
1
HOSE #16-16FJX -16FJX45- 74LG
31
02969679
1
HOSE #16-16FJX -16FJX45- 69LG
32
3710151
4
METAL TACK
33
02968896
1
PLASTIC TIE 11LG
34
02968895
1
PLASTIC TIE 11LG
35
02968894
1
PLASTIC TIE 11LG
36
1458392
1
DECAL,RED REFLECTOR
37
1458393
1
DECAL,YELLOW REFLECTOR
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -45
ROTARY HEAD ASY (NEW STYLE)
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -46
ROTARY HEAD ASY (NEW STYLE)
ITEM
PART NO. QTY.
DESCRIPTION
02969091
1
HEAD, ASY, 60" PAN DEEP DECK
02969090
1
HEAD, ASY, 60" BAR DEEP DECK
1
00001800
6
LOCKNUT, 1/2" NC PLB
2
00002700
6
FLATWASHER, 1/2" PL STD
3
00011100
22
FLATWASHER, 3/8" NC STD
4
00013900
1
HHCS 3/8" NC 2-1/2" PL5
5
00015800
13
LOCKNUT, 3/8"-NC PLC
6
00023100
11
HHCS 3/8" -16UNC 1-1/2" PL5
7
00059900
1
HEXB 3/8" NC 3" PL5
8
001650
1
DECAL, ALAMO IND. LOGO
9
00725746
1
DECAL, PELIGRO
10
00756059
1
DECAL, WARNING OIL LEAK
11
00757140
1
DECAL, ALAMO INDUSTRIAL LOGO
12
00769736
1
DECAL, USE/REPAIR GUARDS
13
00769737
2
DECAL, BLADES THROWN OBJECTS
14
02030700
6
HHCS 1/2"-13UNC 1-1/4" PL5
15
02753400
3
PLASTIC TIE, 15" LG
16
02885700
1
REAR FLAP, 10" X 63" X 3/8" THK
17
02885800
1
REAR CLAMP BAR
18
02925100
1
DECAL, REPLACEMENT PARTS
19
02961085
1
CORDURA SLEEVING, 54" LG
20
02962764
1
DECAL, PINCH POINTS
21
02965797
1
ASY,FRT CNGD 60VM DP DK
22
02967827
1
DECAL, MULTI HAZ
23
02968274
1
PIN, MOWER HEAD MT
24
02984760
1
PIN, 1-1/4" X 15-3/4"LG CHR PLT
25
02969094
1
PRE-ASSEMBLY - 60" ROTARY /BAR
02969095
1
PRE-ASSEMBLY - 60" ROTARY /PAN
27
02969647
1
DECAL, NAME--BRAHMA 30(BLACK)
28
02969648
1
DECAL, PICTURE - BRAHMA (BLACK)
29
02969677
1
HOSE #16-16FJX -16FJX - 68" LG
30
02969678
1
HOSE #16-16FJX -16FJX45 - 74" LG
31
02969679
1
HOSE #16-16FJX -16FJX45 - 69" LG
33
02968896
1
PLASTIC TIE, 11" LG
34
02968895
1
PLASTIC TIE, 11" LG
35
02968894
1
PLASTIC TIE, 11" LG
36
1458392
1
DECAL, RED REFLECTOR
37
1458393
1
DECAL, YELLOW REFLECTOR
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -47
ROTARY HEAD PRE-ASY (NEW STYLE)
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -48
ROTARY HEAD PRE-ASY (NEW STYLE)
ITEM
PART NO. QTY.
DESCRIPTION
02969094
1
PRE-ASSEMBLY - 60 ROTARY / BAR
02969095
1
PRE-ASSEMBLY - 60 ROTARY / PAN
1
02966618
1
WLDMT.-MOWER DP. DK. BRAHMA
2
00011100
8
FLATWASHER, STD 3/8"
3
00015800
8
LOCKNUT, 3/8" NC PLC
4
00037200
6
LOCKNUT, 3/4" NC GRC PL
5
02960521
6
HEX HEAD BOLT, 3/4" NC 2-3/4" PL8
6
02965737
1
BLADE BAR ASY (OPTIONAL)
7
02964456
1
PAN ASSEMBLY, 60 V/M STUMP (OPTIONAL)
8
02965751
2
SKID SHOE ROTARY
9
02965808
1
SPACER, 3-1/8" BLADE BAR
10
00003901
4
LOCKWASHER, 3/4" PL HEAVY
11
02708700
4
SOCKET HEAD BOLT, 3/4" NC 2" PL8
12
02967089
4
SOCKET HEAD BOLT, 3/4" NC 6" PL8
13
2A361612
8
PLOW BOLT, 3/8" X 1 1/2"
14
02969096
1
MOTOR ASY, W/ SPINDLE
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -49
ROTARY HEAD SUB-ASY
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -50
ROTARY HEAD SUB-ASY
ITEM
PART NO. QTY.
DESCRIPTION
02969094
1
ROTARY HEAD SUB-ASY, 60" W/BAR CARRIER
02969095
1
ROTARY HEAD SUB-ASY, 60" W/PAN CARRIER
1
00003901
4
LOCKWASHER
2
00011100
8
FLATWASHER
3
00015800
8
LOCKNUT
4
00037200
6
LOCKNUT
5
00900265
1
TEXAS YELLOW PAINT (REFERENCE ONLY)
6
02960521
6
BOLT
7
02964456
1
BLADE PAN ASY. 60" STUMP JUMPER
02965737
1
BLADE BAR ASY.
8
02965751
2
SKID SHOE
9
02965808
1
SPACER, 3-1/8 F/ BLADE PAN ONLY
10
02966618
1
DECK WLD’MT - DP. DK. BRAHMA
11
02967007
4
BOLT, SOCKET HEAD USE W/ PAN ONLY (TORQUE TO 400 FT. LBS.)
02708700
4
BOLT, SOCKET HEAD USE W/ BAR ONLY (TORQUE TO 400 FT. LBS.)
12
02969096
1
MOTOR ASY. - W/ SPINDLE
13
2A361612
8
PLOW BOLT
14
00012101
4
LOCKWASHER
15
00036300
16
NUT
16
00749136
8
LOCKNUT
17
02970752
4
TIE ROD
18
02970753
1
MOTOR SUPPORT PLATE
19
02970755
4
BOLT
20
W67
16
HARDENED WASHER
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -51
ROTOR SHAFT ASY - FLAIL HEAD 60 INCH
ITEM
PART NO. QTY.
DESCRIPTION
09.666.01
1
ROTOR SHAFTASY, 60"( 1500 MM )
1
09.597.01
1
ROTOR SHAFT WLD’MT, 60" ( 1500 MM )
2
05.775.10
40
BOLT
3
05.282.08
40
SPRING WASHER
4
05.968.06
40
LOCKNUT
5
09.517.01
40
D-RING SHACKLE
6
09.528.01
80
FLAIL KNIFE, ( STANDARD )
7
02975613
80
FLAIL KNIFE, SERRATED ( OPTIONAL )
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -52
ROTOR SHAFT ASY - FLAIL HEAD 80 INCH
ITEM
PART NO. QTY.
DESCRIPTION
41458.01
1
ROTOR SHAFT ASY, 80"( 2000 MM )
1
41.299.01
1
ROTOR SHAFT WLD’MT, 80" ( 2000 MM )
2
05.775.10
54
BOLT
3
05.282.08
54
SPRING WASHER
4
05.968.06
54
LOCKNUT
5
09.517.01
54
D-RING SHACKLE
6
09.528.01
108
FLAIL KNIFE, ( STANDARD )
7
02975613
108
FLAIL KNIFE, SERRATED ( OPTIONAL )
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -53
SERVO CONTROLLED PISTON PUMP ASY PN 02969527A PART 1
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -54
SERVO CONTROLLED PISTON PUMP ASY PN 02969527A PART 1
ITEM
PART NO. QTY.
DESCRIPTION
02969527A
1
PISTON PUMP - SOLENOID CONTROL
2
02977418
1
JAM NUT
3
02977419
1
RETAINING RING
4
02977420
2
RETAINING RING
6
02977421
1
SEAL WASHER
7
02977422
8
CAP SCREW
8
02977423
1
ROTATING KIT, SUB-ASY
9
02977424
1
SERVO PISTON SUB-ASY
10
02977425
1
FOLLOWER, SERVO PISTON
11
02977426
1
PLATE, COVER
12
02977427
2
GASKET, COVER PLATE
14
02977428
1
GASKET, HOUSING
16
02970209
1
GASKET, CONTROL HOUSING
17
02977430
1
PLATE, COVER
18
02977431
1
CAMPLATE, SUB-ASY
19
02977432
2
RACE, THRUST
20
02977433
1
BEARING, THRUST
21
02977434
2
RELIEF VALVE SUB-ASY
22
02977525
2
O-RING
24
02977436
2
BOLT
25
02977437
2
BOLT
26
02970208
6
SOCKET HEAD BOLT
27
02977439
1
VALVE PLATE
28
02977440
1
HOUSING SUB-ASY.
29
02977526
1
HOUSING
30
02977527
1
BEARING ( PRESS FIT )
31
02977528
1
PLUG SUB-ASY.
32
02977529
1
O-RING
33
02977530
1
CRADLE SUB-ASY.
34
02977531
2
BUSHING, DOWEL
35
02977532
1
BUSHING
36
02977533
1
BUTTON HEAD BOLT
37
02977534
2
BOLT
38
02977535
2
SEAL SUB-ASY.
39
02977441
1
BACKPLATE SUB-ASY.
40
02977536
1
BEARING, PRESS FIT
41
02977537
1
ROLL PIN
42
02977325
1
SHAFT, PISTON PUMP
43
02977551
1
COVER PLATE KIT
44
02977442
1
O-RING
45
02977444
2
BOLT
46
02977449
1
PLATE, COVER
47
02977443
1
MOLDED O-RING
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -55
SERVO CONTROLLED PISTON PUMP ASY PN 02969527A PART 2
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -56
SERVO CONTROLLED PISTON PUMP ASY PN 02969527A PART 2
ITEM
PART NO. QTY.
DESCRIPTION
48
02977445
1
WASHER
49
02977446
1
PLUG, SUBASSY
50
02977538
1
O-RING .087 DIA X .644INSIDE
51
02977540
1
USE 02977446
52
02977541
1
USE 02977538
53
02977447
2
PLUG, SUBASSY
54
02977539
2
O-RING .116 DIA X .924INSIDE
58
02977199
1
SEAL PUMP SHAFT
59
02977450
1
CHARGE PUMP ASSEMBLY
60
02977543
1
BUSHING, PRESS FIT W/11 TOOTH
61
02977544
1
PLUG
62
02977545
1
O-RING
63
02977546
1
SHIM (1)NOTE: MAY REQUIRE MORE
64
02977547
1
SPRING
65
02977548
1
POPPET
66
02970207
1
ASY,SOLENOID SERVO CONTROL
67
02977451
1
GEROTOR, INNER RING
68
02977452
1
GEROTOR, OUTER RING
69
02977453
3
ORIFICE, CONTROL VALVE
72
02977456
1
COUPLER
73
02977457
2
RING, RETAINING
74
02977458
1
PLUG SUBASSY
75
02977459
1
WASHER
76
02977460
8
WASHER
77
02977461
4
WASHER
78
02977462
1
RING LOCK
79
02972835
1
ASY CARTRIDGE VALVE W/O COIL
80
02972836
1
ASY COIL
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -57
SPINDLE & HOUSING ASY PN 02960553B
ITEM
PART NO. QTY.
DESCRIPTION
02960553B
1
SPINDLE & HOUSING ASY, SPLINED
1
00999612
1
GREASE, NLGI 000 EP (AS REQUIRED)
2
02963815
1
HOUSING, MACHINED SPINDLE
3
02960561
1
SPINDLE -SPLINED
4
02960558
1
BEARING RING
5
02960559
1
SEAL
6
00754627
1
SNAP RING
7
02960557
1
BEARING CUP & CONE ASY.
8
00755628
1
BEARING CUP & CONE ASY, (USE 00769938)
9
02964269
1
LOCKWASHER, MODIFIED
10
02962030
1
LOCKNUT, SPINDLE BEARING
11
02959018
1
GREASE RELIEF FITTING
Brahma (07-06) Rev 07-07
©2007 Alamo Group Inc.
Parts Section -58
ALAMO INDUSTRIAL
Limited Warranty
1. LIMITED WARRANTIES
1.01.
Alamo Industrial warrants for one year from the purchase date to the original non-commercial, governmental, or
municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser
(“Purchaser”) that the goods purchased are free from defects in material or workmanship.
1.02.
Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be
defective under normal use and service due to defects in material or workmanship.
1.03.
This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use,
negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or
lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal
combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found
in your Operator’s Manual.
1.04.
Except as provided herein, no employee, agent, Dealer, or other person is authorized to give any warranties of any
nature on behalf of Manufacturer.
2. REMEDIES AND PROCEDURES.
2.01.
This limited warranty is not effective unless the Purchaser returns the Registration and Warranty Form to Manufacturer
within 30 days of purchase.
2.02.
Purchaser claims must be made in writing to the Authorized Dealer (“Dealer”) from whom Purchaser purchased the
goods or an approved Authorized Dealer (“Dealer”) within 30 days after Purchaser learns of the facts on which the
claim is based.
2.03.
Purchaser is responsible for returning the goods in question to the Dealer.
2.04.
If after examining the goods and/or parts in question, Manufacturer finds them to be defective under normal use and
service due to defects in material or workmanship, Manufacturer will:
(a) Repair or replace the defective goods or part(s) or
(b) Reimburse Purchaser for the cost of the part(s) and reasonable labor charges (as determined by Manufacturer)
if Purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty
by Manufacturer.
The choice of remedy shall belong to Manufacturer.
2.05.
Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by Manufacturer and
for returning the goods to the Dealer, whether or not the claim is approved. Purchaser is responsible for the transportation
cost for the goods or part(s) from the Dealer to the designated factory.
3. LIMITATION OF LIABILITY.
3.01.
MANUFACTURER DISCLAIMS ANY EXPRESS (EXCEPT AS SET FORTH HEREIN) AND IMPLIED WARRANTIES
WITH RESPECT TO THE GOODS INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
3.02.
MANUFACTURER MAKES NO WARRANTY AS TO THE DESIGN, CAPABILITY, CAPACITY, OR SUITABILITY FOR
USE OF THE GOODS.
3.03.
EXCEPT AS PROVIDED HEREIN, MANUFACTURER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
PURCHASER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS, OR DAMAGE
CAUSED OR ALLEGED TO BE CAUSED DIRECTLY OR INDIRECTLY BY THE GOODS INCLUDING, BUT NOT
LIMITED TO, ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES RESULTING FROM
THE USE OR OPERATION OF THE GOODS OR ANY BREACH OF THIS WARRANTY. NOT WITHSTANDING THE
ABOVE LIMITATIONS AND WARRANTIES, MANUFACTURER’S LIABILITY HEREUNDER FOR DAMAGES
INCURRED BY PURCHASER OR OTHERS SHALL NOT EXCEED THE PRICE OF THE GOODS.
3.04.
NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS WARRANTY OR TRANSACTIONS UNDER
THIS WARRANTY MAY BE BROUGHT MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION HAS
OCCURRED.
4. MISCELLANEOUS.
4.01.
Proper Venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe County,
Texas.
4.02.
Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall
be deemed to be a waiver of any other term.
4.03.
If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the
invalidity of such provision shall not invalidate any other provisions herein.
4.04.
Applicable law may provide rights and benefits to purchaser in addition to those provided herein.
KEEP FOR YOUR RECORDS
ATTENTION: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine
identification when applying for warranty.
Alamo Industrial Implement Model ____________________________ Serial Number ________________________________
Date Purchased __________________________________________ Dealer ______________________________________
ATTENTION:
READ YOUR OPERATOR’S MANUAL
ALAMO INDUSTRIAL
1502 E. Walnut
Seguin, Texas 78155
830-379-1480
TO THE OWNER/OPERATOR/DEALER
To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and
the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find
the information you need.
The OCCUPATIONAL SAFETY AND HEALTH ACT
requirements of tractor operators:
(1928.51 Subpart C)
makes these minimum safety
REQUIRED OF THE OWNER:
1.
2.
3.
4.
Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and
Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and
Ensure that each employee uses such Seatbelt while the tractor is moving; and
Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected
area provided by the ROPS.
REQUIRED OF THE OPERATOR
1.
2.
3.
4.
5.
6.
7.
8.
9.
Securely fasten seatbelt if the tractor has a ROPS.
Where possible, avoid operating the tractor near ditches, embankments, and holes.
Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.
Stay off slopes too steep for safe operation.
Watch where you are going - especially at row ends, on roads, and around trees.
Do not permit others to ride.
Operate the tractor smoothly - no jerky turns, starts, or stops.
Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.
When the tractor is stopped, set brakes securely and use park lock, if available.
Keep children away from danger all day, every day...
Equip tractors with rollover protection (ROPS) and keep all machinery
guards in place...
Please work, drive, play and live each day with care and concern for your
safety and that of your family and fellow citizens.
Brahma Mower Pub 04-04
Printed U.S.A
P/N 02968822P
Download PDF