- No category
advertisement
Owner’s Manual
MA-1000
MONAURAL POWER AMPLIFIER
Thank you for purchasing Phasemation product.
Read your Owner’s Manual thoroughly for proper operation before starting to use your equipment.
Please keep your Owner’s Manual with caution.
Table of Contents
Safety Instructions...................................................................................................3
Usage Cautions.......................................................................................................4
Care of Equipment...................................................................................................4
Names and Functions..........................................................................................5
Mounting or Removing the Vacuum Tubes.........................................................6, 7
Connections...........................................................................................................8
Trouble Shooting Guide..........................................................................................9
User Support.......................................................................................................10
Specifications.........................................................................................................10
2
Safety Instructions
Before starting to use
In this owner’s manual and on the product, various pictures are used to show our customers how to use Phasemation MA-1000 safely and properly in order to avoid the loss of customer’s assets and to protect our customers from harm.
WARNINGS
Do not use the equipment being broken.
Never remodel the equipment.
Never install the equipment near water.
Never put an object filled with water on the equipment.
Never put an object inside the equipment.
In case of using the equipment in an abnormal state, such as seeing smoke, having strange smell, or hearing unusual sounds or noise, this can result in a risk of fire or electric shock. If such an abnormal state occurs, turn the power switch off and then disconnect the AC plug from the outlet. After no smoke is confirmed, ask the dealer for a repair.
Do not disassemble the equipment or remodel it. This can result in a risk of fire.
Do not use the equipment in the bathroom. This can result in a risk of fire or electric shock.
The equipment is designed for using indoors.
Do not expose the equipment to water. This can result in a risk of failures, fire, and electric shock.
Do not put a vase, flower pot, glass or any object filled with skin lotion, chemical, water, or small metal object on the equipment. In case the liquids are spilled or small objects fall inside the equipment, this can result in a risk of fire or electric shock.
If a foreign object has fallen inside the equipment, turn the amplifier’s power switch off and contact the dealer. To keep using the equipment can result in a risk of fire or electric shock.
CAUTIONS
Cautions of
Installation
Places which are not suitable for installation
Connection
Do not install the equipment on unstable tables or unstable places. In case the equipment falls, it can result in a risk of injury of customers.
Pay attention to the wiring of the cord so that a foot is not caught or else the person can stumble or the equipment can fall which is so dangerous.
When moving the equipment, turn the power switch off and endure to disconnect the power plug from the outlet and remove the connecting cord. The cord can be damaged and this can result in a risk of fire and electric shock.
Do not install the equipment in a humid or dusty environment. This can result in a risk of fire or electric shock.
When connecting with other audio equipments or a television set, read the manual of the equipment, turn the power switch off, and connect according to the instructions.
3
Usage Cautions
Installation place In order to use the equipment for a long time, follow the instructions shown in below:
Do not install this equipment near a heat source such as direct sun light, a stove and so on.
Do not use this equipment at a poorly-ventilated, humid or dusty place.
Do not install this equipment at an unstable place such as a slope or a vibrating place.
Do not install this equipment near the window where the equipment can be exposed to rain.
Do not install this equipment in a high humid environment.
Avoid using this equipment on an equipment generating heat such as an amplifier.
Keep this equipment away from a power supply transformer or a motor of another equip-
Note
Avoid covering the equipment with a cloth or installing it in enclosed space because radiation and air convection from the chassis surface can be hindered.
To prevent external sound pressure and grit / dust from entering the equipment, inspiratory/exhaust ports to radiate the heat are not arranged against the equipment consciously. Radiating the heat from the equipment is done by cooling with air convection in the chassis and with radiation and air convection from the chassis having high thermal conductivity.
Useable AC power supply voltage and frequencies
AC 100V power supply must be supplied.
The equipment operates normally in both areas of 50Hz and 60Hz power supply frequencies.
Handling AC power cable
Do not touch the AC power cable with wet hands.
Do not pull the cable strongly or do not bend the cable. The cable can be damaged and can result in a risk of fire and electric shock.
Use the AC power cable of the accessories.
Repair
In case of the equipment failure consult the dealer.
Care of Equipment
If the equipment is covered with dust or dirt clean it with a soft cloth.
If the equipment is covered with heavy dust put a very thin mild detergent on a soft cloth.
Wring the cloth and wipe off the dust and dirt. Then clean with a dry soft cloth.
Never use chemical agents such as thinner, naphtha or alcohol when cleaning it.
If any of them is attached to the equipment, the silk printing can be flaked or the surface can lose metal luster.
4
Names and Functions
Front Panel
(2)
(1)
MA-1000 POWER AMPLIFIER
POWER
(1) POWER switch
The power supply can be turned on or off by pressing the POWER switch.
After pressing the POWER switch, (2) POWER indicator lights up.
(2) POWER indicator
The POWER indicator lights up blue when the power supply is supplied.
Rear Panel
MODEL MA-1000
100V 50/60Hz 70W
AC IN FUSE 3A
INPUT
SER.NO.
(5)
(6)
(3) (4)
(3) Input terminal
Connect an output of a pre-amplifier or attenuator.
(4) Output terminals
Connect a speaker.
These terminals can be connected for a 4-ohm speaker (4 ohms to
8ohms) or a 8-ohm speaker (8 ohms to 16 ohms)
(5) AC power inlet
Connect the AC power cable of accessories between this terminal and an AC outlet.
(6) Fuse
The glass tube fuse rated 5.2mm in diameter, 2x20mm, 3A, and
AC250V is inserted.
When replacing it with a new fuse after being blown, please contact your dealer.
5
Mounting or Removing the Vacuum Tubes
Removing the cover
Vacuum tube cover
(1) Remove the vacuum tube cover straight up.
Mounting the vacuum tubes
5R4GA 2A3-40 ECC803
MA-1000 POWER AMPLIFIER
POWER
(1) The vacuum tubes are arranged in the order of “5R4GA”, “2A3-40”, and “ECC803” from the left.
(2) Because the vacuum tubes have respective directional properties mount them as follows.
Thicker pin
Shape for rib
Pin-1
5R4GA
2A3-40 ECC803
Front side of unit
From-air view of vacuum tube
(3) After mounting all vacuum tubes attach the vacuum tube cover.
6
Removing the vacuum tubes
(1) Remove the vacuum tube cover straight up.
(2) When removing the vacuum tube, you must hold the resin portion at the root of the vacuum
tube and pull it out. In case of holding the glass portion, the vacuum tube may break.
Cautions for handling the vacuum tube
Since the vacuum tubes are made of glass, they can be broken easily so they should be handled carefully.
After turning the power to OFF and waiting until the vacuum tubes cool well, you can remove them or mount them. In case the vacuum tube does not cool, this can result in a risk of failure, electric shock, or burns.
We measured the performance of the vacuum tubes of accessories and selected good ones.
In case a vacuum tube except our ones of accessories is used, this can result in a risk of performance deterioration or failure. The vacuum tubes of accessories should be used.
After mounting the vacuum tubes, the cover must be placed back. For the vacuum tube, a high voltage is applied in the operation and then they turn to a high temperature. In case you touch them or some object hits them, these can result in a risk of burnt injury, electric shock, or fire.
When an abnormal state occurs for the vacuum tubes, please contact your dealer.
7
Connections
INPUT
MODEL MA-1000
100V 50/60Hz 70W
Connect a 4- or
8-ohm speaker.
OUTPUT
RIGHT LEFT
Pre-amplifier
Speaker
AC IN FUSE 3A
SER.NO.
AC Power Cable of
Accessories
Plugging the plug of AC power cable in an outlet
Circle
Side assigning the circle
Long slot
A circle is assigned on one side of the plug of the AC power cable so that better sound quality is reproduced by matching the power supply polarity with another equipment.
This polarity may be different because of house wiring for outlet or because of the power supply condition; however, generally the side assigning the circle should be inserted to the long slot of the outlet.
8
Trouble Shooting Guide
In case the equipment does not operate properly, check out the followings.
If it does not operate properly even after checking the advised points, endure to disconnect the AC plug from the outlet and then contact the dealer.
Trouble
The power is not supplied.
Causes
The plug of AC power cable is not plugged in completely.
The sound is not heard.
Hum noise is heard.
Sound is not heard immediately after turning the power on.
The audio wires are not plugged in completely.
The audio wires are not plugged in completely.
The earth cable from the analogue disc player is not connected.
A power supply transformer or motor in an other equipment is installed near this equipment.
Sound is not outputted until the circuits come to stable operation.
Measures
Insert the plug of the AC cable into an outlet firmly.
Firmly insert the outlet of the AC power cable into the AC inlet of the power equipment.
Insert the audio wires completely.
Insert the audio wires completely.
Connect the earth cable completely.
Place this equipment apart from the power supply transformer or motor of other equipments.
Please wait about 30 seconds.
9
User Support
As for the unclear matters with regards to the after service, please contact the dealer.
Specifications
Product
Maximum output
Gain
Frequency characteristics
Input terminal
Output terminals
Power consumption
Max. dimensions (mm)
Weight
2A3-40 Single Monaural Power Amplifier
10W / 8 ohms (T.H.D. 10%)
21 dB
10 Hz to 40 kHz (+0, –3 dB)
Unbalanced input terminal (RCA terminal)
For speaker (4 ohms or 8ohms)
70 W
247 (W) x 224 (H) x 427 (D)
16 kg
Accessories: AC power cable (x1)
Vacuum tube: 2A3-40 (x1)
ECC803S (x1)
5R4GA (x1)
The appearance and specifications of this equipment are subject to change without notice in order to improve it.
10
Kyodo Denshi Engineering Co., Ltd.
Ikebe-cho 4900-1 Tsuzuki-ku Yokohama-shi Kanagawa 224-0053 Japan
TEL 045-934-5234
FAX 045-934-7576
E-mail [email protected]
URL http://www.phasemation.com
is the original audio brand of Kyodo Denshi Engineering Co., Ltd.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project