Alpine PXA-H701 Owner's Manual

PXA-H701

MULTIMEDIA MANAGER™

• OWNER'S MANUAL

Please read before using this equipment.

• MODE D'EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

®

R

ALPINE ELECTRONICS MARKETING, INC.

1-1-8 Nishi Gotanda,

Shinagawa-ku, Tokyo 141-0031, Japan

Phone 03-5496-8231

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.

7300 Warden Ave., Suite 203, Markham,

Ontario L3R 9Z6, Canada

Phone 1-800-ALPINE-1 (1-800-257-4631)

Kukje Printing Co., Ltd

127-2 Gamjeon-dong

Sasang-gu

Busan Korea

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

Phone 03-9769-0000

ALPINE ELECTRONICS GmbH

Frankfurter Ring 117, 80807 München,

Germany

Phone 089-32 42 640

ALPINE ELECTRONICS OF U.K. LTD.

Alpine House

Fletchamstead Highway,

Coventry CV4 9TW, U.K.

Phone 0870-33 33 763

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris

Nord II, B.P. 50016, 95945 Roissy

Charles de Gaulle Cedex, France

Phone 01-48638989

ALPINE ITALIA S.p.A.

Viale C. Colombo 8, 20090 Trezzano

Sul Naviglio (MI), Italy

Phone 02-484781

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal de Gamarra 36, Pabellón, 32

01013 Vitoria (Alava) - APDO 133, Spain

Phone 945-283588

Designed by ALPINE Japan

Printed in Korea (S)

68-00493Z08-A

EN

FR

ES

ENGLISH

Before using

The control unit for the PXA-H701 is sold separately. The operation method using this control unit (sold separately) is printed in this instruction manual.

However, if you use head units such as the IVA-D300 or the IVA-D900, you can also operate the PXA-H701 from these head units (Items such as AUTO

TCR and navigation system voice guidance interruption settings can only be operated from the Control Unit). For more details on the head unit operation, see "External Audio Processor (Optional) in the instruction manual for the head unit.

Contents

Operating Instructions

WARNING

WARNING .................................................. 2

CAUTION ................................................... 2

PRECAUTIONS ......................................... 3

Basic Operation

Turning the power on and off .......................................... 4

About indicators .............................................................. 4

Operating the Rotary encoder .......................................... 4

Setting the speakers ......................................................... 4

Using with Ai-NET connections ..................................... 5

Using with RCA-type or optical cable connections

(non Ai-NET connections) (only when using the control unit sold separately) ...................................... 5

Automatic Adjustments

Performing time correction automatically

(Automated Time Correction) ................................... 6

Settings/Adjustments

Performing time correction manually (TCR)/Switching the phase .................................................................... 8

Bass Focus ..................................................................... 10

Graphic equalizer adjustments ...................................... 12

Parametric equalizer adjustments .................................. 13

X-OVER ........................................................................ 15

X-OVER adjustment ..................................................... 16

MX settings ................................................................... 18

BASS COMP. setting .................................................... 19

FR

Using Dolby Surround

Using the Pro Logic II mode ......................................... 20

Adjustment procedure for Dolby Surround ................... 21

Speaker setup ................................................................. 22

Adjusting the speaker levels .......................................... 22

Mixing bass sound to the rear channel .......................... 23

Adjusting the acoustic image ......................................... 24

Achieving powerful high volume sound ....................... 25

Adjusting the DVD level ............................................... 25

Convenient Functions

Navigation system voice guidance interruption (only when using the control unit sold separately) ........... 26

Linear PCM setting ....................................................... 26

Display settings ............................................................. 27

MX mode setting (Ai-NET connection) ........................ 27

Storing settings in the memory ...................................... 28

Calling out stored values ............................................... 28

Defeat mode ................................................................... 28

Switching the display mode .......................................... 29

Installation and Connections

Warning ......................................................................... 30

Caution .......................................................................... 30

Precautions .................................................................... 31

Accessories .................................................................... 32

Installation ..................................................................... 33

Basic Connections Diagram .......................................... 36

Examples of system expansion ...................................... 37

Information

Terminology .................................................................. 41

Others

In case of difficulty ........................................................ 42

Specifications ................................................................ 43

LIMITED WARRANTY

ES

DE

IT

SE

1

-EN

WARNING

WARNING

This symbol means important instructions.

Failure to heed them can result in serious injury or death.

CAUTION

This symbol means important instructions.

Failure to heed them can result in injury or material property damage.

DO NOT OPERATE ANY FUNCTION THAT TAKES

YOUR ATTENTION AWAY FROM SAFELY DRIVING

YOUR VEHICLE.

Any function that requires your prolonged attention should only be performed after coming to a complete stop.

Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN

STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE THIS PRODUCT FOR MOBILE 12V

APPLICATIONS.

Use for other than its designed application may result in fire, electric shock or other injury.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

Failure to do so may result in fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.

2

-EN

PRECAUTIONS

Temperature

Be sure the temperature inside the vehicle is between

+60

°C (+140°F) and –10°C (+14°F) before turning your unit on.

Installation Location

Make sure the PXA-H701 will not be installed in a location subjected to:

• Direct sun and heat

• High humidity and water

• Excessive dust

• Excessive vibrations

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest

Alpine Service Station for servicing.

3

-EN

FR

ES

DE

IT

SE

Basic Operation

CHANNEL

ENTER

SETUP

Rotary encoder

PRO LOGIC II indicator

Dolby Digital indicator

DTS indicator

Turning the power on and off

This unit does not have a power switch. The head unit to which the unit is connected, controls its power.

NOTE

When the power is turned ON for the first time, the

SETUP mode is automatically activated.

About indicators

• PRO LOGIC II indicator

Lights amber in the Dolby Surround decode mode

• Dolby Digital indicator

Lights amber in the Dolby Digital decode mode

• DTS indicator

Lights amber in the DTS decode mode

Operating the Rotary encoder

This unit uses the Rotary encoder when establishing settings or adjustments. When operating with the Rotary encoder, press the

Rotary encoder and startup the Rotary encoder before the operation.

Setting the speakers

First make the speaker settings.

Turn off speaker channels that are not connected.

1

Press the SETUP button.

The setup mode is set.

2

Turn the Rotary encoder to select the

“SPEAKER SELECT” mode, then press the

ENTER button.

3

Press the CHANNEL button to select the speaker, then press the ENTER button.

F1

(Front 1)

Sub. W

F2

(Front 2)

(Subwoofer)

R

(Rear)

Ct

(Center)

4

Turn the Rotary encoder to set the speaker type ON or OFF, then press the ENTER button.

Repeat steps 3 and 4 to set all unconnected speaker channels to “OFF”.

F1 (Front 1) : Tw (Tweeter)/Full (Full Range)/OFF

F2 (Front 2) : Full (Full Range)/OFF

R (Rear) : ON/OFF

Ct (Center) : Center/Sub.W (Subwoofer)/OFF

NOTE

Set to “Subwoofer” when a subwoofer is connected to the center speaker output.

Sub.W (Subwoofer) : ON/OFF

* When Full (Full Range) is selected in F1

(Front 1), the confirmation message of

Tweeter presence will be displayed next.

Turn the Rotary encoder and select YES/

NO, then press the ENTER button. Please set to protect the speakers.

5

Press the SETUP button repeatedly to quit the setup mode.

4

-EN

Using with Ai-NET connections

When Ai-NET connections are used, the volume, subwoofer, balance and fader are adjusted from the head unit (they cannot be adjusted from the

PXA-H701). However, BASS and TREB can not be adjusted from the head unit, so adjust them from PXA-H701.

Using with RCA-type or optical cable connections (non Ai-NET connections)

(only when using the control unit sold separately)

Switching the input

The PXA-H701 is equipped with three sets of analog signal inputs and three sets of digital signal inputs. For further information about connections, see Page 36.

Adjusting the input level

Using the analog, RCA-type connections, the

PXA-H701’s input level must be preset from the head unit.

Adjust the input level using a sound source with a high recording level (such as pop or rock music).

EN

1

Turn on the head unit’s power.

2

Turn the Rotary encoder on the main unit counterclockwise and set the volume level to “0”.

3

Gradually increase the volume of the head unit until “INPUT LEVEL OVER” appears in the display.

Reduce the volume slightly from this position, until “INPUT LEVEL OVER” display just turns off.

This completes the setting.

Do not change the head unit volume level from this optimum setting. Use the PXA-H701, only, for changing the volume level.

FR

ES

NOTE

Switch to the spectrum analyzer display mode or the input channel display mode before adjusting the input level. (See page 29)

1



2

Turn the Rotary encoder to select the “INPUT

SELECT” mode, then press the ENTER button.

3

Turn the Rotary encoder to select the input mode, then press the ENTER button.

Analog 1

Digital 3

Analog 2

Digital 2

Analog 3

Digital 1

4


NOTE

Non Ai-NET connections

Alpine products are equipped for a bus connection system called “Ai-NET” which can only be used for connections between Ai-NET products.

The PXA-H701 is an Ai-NET product, but is designed to allow connections to other (non Ai-NET) products as well. Thus RCA-type and optical cable connections are also possible.

Connections to non Ai-NET products are referred to as

“non Ai-NET connections”.

Adjusting the volume, balance, fader and subwoofer

After determining the input level, adjust the volume, balance, fader and subwoofer from the

PXA-H701. Be careful not to make these adjustments on the head unit.

DE

1

Press the ENTER button and select the mode to be adjusted.

VOLUME BALANCE

Sub.W LEVEL

FADER

2

Turn the Rotary encoder within 5 seconds and adjust to the desired level.

VOLUME

BALANCE

: 0 ~ 35

: L15 ~ R15

FADER : F15 ~ R15

Sub.W LEVEL : 0 ~ +15

NOTE

When the subwoofer is set to “OFF”, the Sub.W

LEVEL adjustment is ineffective.

IT

SE

5

-EN

Automatic Adjustments

3

Connect the microphone.

1) Fasten the microphone included with control unit at the center of the driver’s seat’s headrest facing upwards.

AUTO TCR

ENTER To microphone input jack

Microphone

Belt, etc.

Rotary encoder

Performing time correction automatically

(Automated Time Correction)

Due to the particular conditions inside the vehicle, there is a major difference between the distances of the various speakers and the listening position. This function uses the included measurement microphone to automatically measure and analyze the distances between the speakers and the listening position and perform the optimum time correction.

The AUTO TCR operation from the head unit may not be performed depending on the head unit combination.

1

Check that the defeat mode is off.

(See page 28.)

2

Prepare the vehicle.

1) Park the vehicle in a quiet place.

2) Close the vehicle’s doors and windows.

2) Connect the microphone to the PXA-H701.

To microphone input jack

Base unit

Microphone

4

Set the vehicle’s engine key to the ACC position.

• Vibrations could make it difficult to achieve the appropriate adjustment values, so turn the engine off.

• Noise could make it impossible for automatic measurements to be made, so make sure the air conditioner, heater and all other devices are turned off.

5

Press the AUTO TCR button.

6

Turn the Rotary encoder, select the tweeter setting, then press the ENTER button.

YES NO

The count down starts.

7

Once the count down starts, get out of the vehicle and shut the doors within 10 seconds.

AUT O TCR

10 sec .

t o s t a r t

6

-EN

With the automatic adjustment function, the operation described below is performed.

Adjustments are completed in about 10 seconds.

Time correction.

“END” is displayed for about 15 seconds and the automatic adjustment is completed.

• If the microphone does not pick up the sound or the speakers are not working or are connected or wired improperly, the automatic adjustments are not performed and a error message is displayed.

Check the various speakers then perform the automatic adjustments again.

AUT O TCR

ERROR

8

Check that the automatic adjustment has been completed (that “END” has been displayed for about 15 seconds), then get back into the vehicle and disconnect the microphone.

9

To store, follow the procedure described at

“Storing settings in the memory” (page 28).

NOTES

• Automatic measurements cannot be made unless the microphone is connected (error display). To perform time correction automatically, be sure to connect the included microphone first.

• Before making automatic measurements, press the

AUTO TCR button to cancel it.

• No other operations can be performed while measurements are being made.

• Measurements will differ according to the position in which the microphone is mounted.

• Note that using for extended periods of time without turning on the engine may wear down the battery.

• Automatic measurements cannot be made for the subwoofer. Make the subwoofer setting manually.

Refer to “Performing time correction manually

(TCR)/Switching the phase” (page 8).

• When the speaker is set to the “OFF” mode, the TCR for that speaker cannot be adjusted. Refer to “Setting the speakers” (page 4).

• After making the settings, we recommend storing them in the memory. For instructions, see page 28.

7

-EN

EN

FR

ES

DE

IT

SE


TCR/PHASE

CHANNEL

ENTER

Rotary encoder

• Concrete examples

1. Calculating the time correction value for the front left speaker on the diagram below.

Conditions:

Distance between farthest speaker and listening position: 2.25 m (88-3/4")

Distance between front left speaker and listening position: 0.5 m (20")

Calculation: L = 2.25 m (88-3/4") – 0.5 m (20")

= 1.75 m (68-3/4")

Compensation time = 1.75 ÷ 343 x 1000

= 5.1 (ms)

In other words, setting the time correction value for the front left speaker to 5.1 (ms) sets a virtual distance matching the distance to the farthest speaker.

Performing time correction manually

(TCR)/Switching the phase

Because of the particular conditions inside the vehicle, there are major differences in the distances between the different speakers and the listening position. The proper time correction can be obtained using the automatic time correction function (“AUTO TCR”), but it is also possible to calculate the optimum correction values and eliminate the time error at the listening position yourself using this function. You can also use this function to switch the phase.

When operating with head units such as the IVA-

D300, the adjustment is different depending on the head unit.

1


(See page 28.)

2

Sit in the listening position (the driver’s seat, for example) and measure the distance (in meters) between your head and the various speakers.

3

Calculate the difference in distance between the farthest speaker and the other speakers.

L = (distance of farthest speaker)

– (distance of other speakers)

4

Divide the distances calculated for the different speakers by the speed of sound (343 m/s temperature 20 °C).

This value is the time correction value for the different speakers.

0.5m

2.25m

5.1ms

The sound is uneven because the distance between the listening position and the different speakers is different.

The difference in the distance between the front left and rear right speakers is 1.75 meters

(68-3/4").

Time correction eliminates the difference between the time required for the sound from the different speakers to reach the listening position.

Setting the time correction of the front left speaker to

5.1 ms makes it possible to coordinate the distance from the listening position to the speaker.

5

Press the TCR/PHASE button to set the time correction mode.

8

-EN

6

Press and hold the CHANNEL button for at least

2 seconds and select “L and R (LR)” or “L or R”.

L and R (LR)

(factory default)

L or R

L and R (LR): Sets the same adjustment values

L or R: for the left and right channels.

Different adjustment values can be set for the left and right channels.

7

Press the CHANNEL button and select the desired channel, then press the ENTER button.

When “L and R (LR)” is selected:

Front 1 Front 2 Rear

Sub. W

* 1

Center

When “L or R” is selected:

Front 1 L Front 1 R Front 2 L

* 3

Sub. W

* 2

Center Rear R

Front 2 R

Rear L

*1 When center is set to subwoofer, it is not displayed.

*2 When center is set to subwoofer, it becomes

Sub.W(L).


Sub.W(R).

8

Turn the Rotary encoder to adjust the time correction value (0.00 ~ 20.00ms), then press the ENTER button.

T C R / P H A S E L F 1 R R

D E L A Y

1 0 .

:

2

R C

5 m s

P H A S E : 1 8 0 °

9

Turn the Rotary encoder to switch the phase, then press the CHANNEL button.

Press the ENTER button to return to step 8.

0 180

T C R / P H A S E L F 1 R R

D E L A Y

1 0 .

:

2

R C

5 m s

P H A S E : 1 8 0 °

EN

10

Repeat steps 7 to 9 to adjust other channels.

11

Once the adjustments are completed, press the

TCR/PHASE button.

FR

NOTES

• When the speaker is set to the “OFF” mode, the TCR for that speaker is ineffective. Refer to “Setting the speakers” (page 4).


ES

DE

IT

* The difference in the sound when the defeat mode is turned off (adjusted time correction) and on (default value) can be checked as follows:

1) While in the adjustment mode, press and hold the TCR/PHASE button for at least 2 seconds.

2) Press the TCR/PHASE button to switch the defeat mode on and off and listen to the difference in the sound.

3) To quit, select the desired setting, then press the ENTER button.

Note that if you press the ENTER button with the defeat mode turned on, the adjustments are reset to the defeat on status (the default values).

SE

9

-EN


5

Turn the Rotary encoder to set the step of frontrear/left-right.

TCR/PHASE

CHANNEL

ENTER

6

Moreover, for setting another channel (speaker), repeat steps 4 and 5.

B.C.

7

After completing the setting, press the ENTER button to return to the time correction mode.

Here, you can compare the sound of Defeat OFF

(adjustment value) and Defeat ON (initial).

For the operation method, refer to step 8 of

“Performing time correction manually (TCR)/

Switching the phase” on page 9.

Rotary encoder

8

Press the TCR/PHASE button to complete the setting.

Bass Focus

The time difference between the front-rear/leftright speakers, can be adjusted a pair at a time.

Audible time correction can be made from 0.05

ms to 20.00 ms in 401 steps (0 to 400).

NOTE

The setting made in Bass Focus is reflected in the time correction.

1


(See page 28.)

2

Press the TCR/PHASE button to select the time correction mode.

3

Press the B.C. button to select the “BASS

FOCUS” setting mode.

4

Press the CHANNEL button to select the frontrear/left-right speaker.

FL

RL

FR

RR

Front (left-right) speakers

FL

RL

FR

RR

Rear (left-right) speakers

10

-EN

FL

RL

FR

RR

Left (front-rear) speakers

FL

RL

FR

RR

Right (front-rear) speakers

Example of Steps 4 and 5 Setting

1. After entering corrections for the front (left and right) speakers in STEP 30, the time difference is 1.5 ms for both front-left and front-right speakers.

1.5ms

1.5ms

1.5ms

3.0ms

1.5ms

1.5ms

2. After entering corrections for the left (front and rear) speakers in STEP 30, the time difference becomes 3.0 ms* for the front left speaker, and

1.5 ms for the left rear speaker.

* Because the time difference was already set to 1.5 ms for the front left speakers in STEP 1, the additional correction in STEP 30 makes the time difference of the front left speaker 3.0

ms.

1.5ms

Time difference Table

21

22

23

24

18

19

20

12

13

14

15

16

17

29

30

31

32

33

25

26

27

28

8

9

10

11

6

7

4

5

Number of steps

Time

Difference

(ms)

Number of steps

Time

Difference

(ms)

2

3

0

1

0.00

0.05

0.10

0.15

34

35

36

37

1.70

1.75

1.80

1.85

0.20

0.25

0.30

0.35

0.40

0.45

0.50

0.55

38

39

40

41

42

43

44

45

1.90

1.95

2.00

2.05

2.10

2.15

2.20

2.25

0.60

0.65

0.70

0.75

0.80

0.85

0.90

0.95

1.00

1.05

1.10

1.15

1.20

1.25

1.30

1.35

1.40

1.45

1.50

1.55

1.60

1.65

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

2.95

3.00

3.05

3.10

3.15

3.20

3.25

3.30

3.35

2.60

2.65

2.70

2.75

2.80

2.85

2.90

2.30

2.35

2.40

2.45

2.50

2.55

89

90

91

92

86

87

88

93

94

95

96

4.65

4.70

4.75

4.80

97

98

4.85

4.90

99 4.95

100–399 5.00–19.95

400 20.00

4.30

4.35

4.40

4.45

4.50

4.55

4.60

78

79

80

81

82

83

84

85

74

75

76

77

Number of steps

Time

Difference

(ms)

68

69

3.40

3.45

70

71

72

73

3.50

3.55

3.60

3.65

3.70

3.75

3.80

3.85

3.90

3.95

4.00

4.05

4.10

4.15

4.20

4.25

EN

FR

ES

DE

IT

SE

11

-EN


G.EQ CHANNEL

ENTER


Sub.W(R).

5

Turn the Rotary encoder to select the frequency, then press the ENTER button.

P.EQ

Rotary encoder

Adjustable frequencies

Front/Rear/Center: 20Hz~20kHz (1/3 octave step)

Sub.W: 20Hz~160Hz (1/3 octave step)

6

Turn the Rotary encoder to adjust the level ( ± 9 dB in steps of 1 dB), then press the ENTER button.

3 1 – G . E Q F r o n t L

Graphic equalizer adjustments

The graphic equalizer allows you to modify the sound using 31 bands each for the front (left and right), rear (left and right) and center speakers.

An additional 10 bands are available for the subwoofer. This allows you to customize the sound to suit your taste.

1


(See page 28.)

2

Press the G.EQ button to set the graphic equalizer mode.

3



L and R (LR)

(factory default)

L or R

L and R (LR): Sets the same adjustment values for the left and right channels.

L or R: Different adjustment values can be set for the left and right channels.

4

Press the CHANNEL button to select the desired channel, then press the ENTER button.


* 1

Front Rear Center Sub. W


Front L Front R Rear L

* 3

Sub. W

* 2

Center

Rear R



Sub.W(L).

12

-EN

1 2 . 5 k H z – 9 d B

7

Repeat steps 5 and 6 to adjust other frequencies.

8

To adjust other channels, press the CHANNEL button to return to step 4.

* The difference in the sound when the defeat mode is turned off (adjusted graphic equalizer settings) and on (default values) can be checked as follows:

1) While in the adjustment mode, press and hold the G.EQ button for at least 2 seconds.

2) Press the G.EQ button to switch the defeat mode on and off and listen to the difference in the sound.



9


G.EQ button.

NOTES

• When the speaker is set to the “OFF” mode, the graphic equalizer for that speaker is ineffective.

Refer to “Setting the speakers” (page 4).

• Check the playable frequency ranges of the connected speakers before making the equalizer adjustments. If the speaker’s playable frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz or 20 Hz band has no effect. Additionally, you may overload and damage the speakers.


• When graphic EQ is adjusted, the adjustment for parametric EQ becomes ineffective.

Parametric equalizer adjustments

The frequency bands of the graphic equalizer are fixed. This makes it very difficult to correct for undesired peaks and dips at specific frequencies.

The parametric equalizer’s center frequency can be tuned these specific frequencies. Then, the bandwidth (Q) and level are fine-tuned, independently, to make the necessary corrections. The parametric equalizer function is an advanced tool for serious audiophiles.

1


(See page 28.)

2

Press the P.EQ button to set the parametric equalizer mode.

3



L and R (LR)

(factory default)

L or R




4



* 1

Front Rear Center Sub. W


Front L Front R Rear L

* 3

Sub. W

* 2

Center

Rear R



Sub.W(L).


Sub.W(R).

5

Turn the Rotary encoder to select the band, then press the ENTER button.

Adjustable bands

Front/Rear/Center : 5 bands

Sub.W : 2 bands

P . E Q P F r o n t L

B A N D

F c :

: 4

3 . 1

: 2

5 k

Q

L v : + 7 d B

H z

6

Turn the Rotary encoder to select the frequency, then press the ENTER button.

For the adjustable frequencies, see page 43.


B A N D : 4

F c :

Q :

3 . 1

2

5 k

L v : + 7 d B

H z

7

Turn the Rotary encoder to adjust the band width (Q), then press the ENTER button.

The band width can be adjusted in 6 steps of

0.5/1/2/3/4/5.


B A N D : 4

F c :

Q

3 . 1

: 2

5 k

L v : + 7 d B

H z

8

Turn the Rotary encoder to adjust the level ( ±9 dB in steps of 1 dB), then press the ENTER button.

P . E Q F r o n t L

B A N D : 4

F c :

Q

3 . 1

: 2

5 k

L v : + 7 d B

H z

13

-EN

EN

FR

ES

DE

IT

SE


P.EQ

CHANNEL

ENTER

NOTES

• When the speaker is set to the “OFF” mode, the parametric equalizer for that speaker is ineffective.

Refer to “Setting the speakers” (page 4).

• It is not possible to adjust the frequencies of adjacent bands within 7 steps.

• Check the playable frequency ranges of the connected speakers before making the equalizer adjustments. If the speaker's playable frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz or 20 Hz band has no effect. Additionally, you may overload and damage the speakers.


• When parametric EQ is adjusted, the adjustment for graphic EQ becomes ineffective.

9

Repeat steps 5 to 8 to adjust other bands.

10

To adjust other channels, press the CHANNEL button to return to step 4.

* To compare the factory default settings

(DEFEAT ON) with your newly adjusted parametric equalizer settings (DEFEAT

OFF), do the following:

1) While in the adjustment mode, press and hold the P.EQ button for at least 2 seconds.

2) Press the P.EQ button to switch the defeat mode on and off and listen to the difference in the sound.



11


P.EQ button.

14

-EN

X-OVER

The PXA-H701 is equipped with an active crossover allowing the frequency bands to be split before amplification. Because of this, there is no need for a passive network between the speakers and amplifiers. This makes the amplifiers fully independent, eliminating the problem of interference. This also makes it possible to achieve the optimum acoustic space by dividing the playback frequencies in a way suited to the speaker’s response.

This adjustment requires sufficient knowledge and experience. If you have problems, we suggest you have the adjustment made by your store authorized of Alpine dealer.

Adjust the high pass filter (H.P.F.) and low pass filter (L.P.F.) and set the slope (filter response attenuation slope) for the different bands.

Make the adjustments according to the playable frequency ranges and frequency responses of the connected speakers.

Cutoff frequency adjustment range

(1/6 octave steps)

Slope adjustment

H.P.F.

L.P.F.

H.P.F.

L.P.F.

Front 1

(Front speaker 1)

Select TWEETER

Front 1

(Front speaker 1)

Select FULL RANGE

1kHz –

18kHz

20Hz –

18kHz

Front 2

(Front speaker 2)

Rear

(Rear speaker)

Center*

(Center speaker)

Sub. W

(Subwoofer)

20Hz –

18kHz

20Hz –

18kHz

20Hz –

18kHz

20Hz –

180Hz

1.1kHz –

20kHz

22Hz –

20kHz

22Hz –

20kHz

22Hz –

20kHz

22Hz –

20kHz

22Hz –

200Hz

6/12/18/

24/30dB

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

24/30dB

* If center is set as subwoofer, the adjustment range changes to the range of subwoofer.

Signals with these frequencies output

Slope adjustment

Slope OFF

20Hz 10kHz

H.P.F. cutoff frequency L.P.F. cutoff frequency

EN

The H.P.F. setting cannot be the same as or exceed the L.P.F. setting for that channel.

• The crossover network is a filter that divides specific frequency bands.

• The high pass filter is a filter that cuts frequencies below a certain frequency (bass frequencies) and lets through treble frequencies.

• The low pass filter is a filter that cuts frequencies above a certain frequency

(treble frequencies) and lets through bass frequencies.

• The slope is a value expressing the attenuation of the signal in decibels when the frequency is increased or decreased by one octave.

• The higher the slope value, the steeper the slope.

• If the slope is set to “OFF”, the signal does not pass through the filter, so there is no effect.

• In order to protect the speakers, if Tweeter is selected in Front 1, there is no filter OFF

(slope OFF) setting for H.P.F.

For the same reason, the subwoofer low pass filter cannot be turned off (the slope cannot be set to “OFF”.)

• Tweeters may be damaged if low frequency signals are input to them.

FR

ES

DE

IT

SE

15

-EN


X-OVER

CHANNEL

ENTER



Sub.W(L).


Sub.W(R).

5

Turn the Rotary encoder to adjust the H.P.F.

cutoff frequency, then press the ENTER button.

The adjustable bands differ according to the channel (speaker).

Rotary encoder

X-OVER adjustment

This section describes the procedure for making the X-OVER adjustment. Before performing this procedure, see “X-OVER” on page 15.

The SLOPE to FLAT operation from the head unit may not be performed depending on the head unit combination.

X – O V E R F r o n t 2 1/2

H P

H P s f c : 3 5 0 l o p

L P f

L P s c :

I o

1 e : 1 2

. 8 k p e : 6

6

Turn the Rotary encoder to adjust the H.P.F.

slope, then press the ENTER button.

To set filter off (slope off), press and hold the X-

OVER button for at least 2 seconds.

1


(See page 28.)

2

Press the X-OVER button to set the X-OVER adjustment mode.

3



L and R (LR)

(factory default)

L or R




4



Front 1 Front 2 Rear

* 1

Center

Sub. W


Front 1 L Front 1 R Front 2 L

* 3

Sub. W

* 2

Center Rear R

Front 2 R

Rear L

X – O V E R F r o n t 2

H P

H P s

L P f

L P s f c : 3 5 0 l o p c :

I o e : 1 8

1 . 8 k p e : 6

1/2

7

Next, make the adjust for the L.P.F. in the same way as in steps 5 and 6.

8

Turn the Rotary encoder to adjust the level, then press the CHANNEL button.

Press the ENTER button to return to step 5.

The level can be adjusted between –12 and 0.

X – O V E R F r o n t 2

L e v e l :

– 4 d B

2/2

9

Repeat steps 4 to 8 to adjust other channels.

10


X-OVER button.

16

-EN

Hint for adjusting the subwoofer

• If the subwoofer is installed on the rear deck, setting a gentle L.P.F. slope (for example 6 dB/ oct.) makes the sound localization more to the rear. This can also affect the acoustic localization of the front.

Hints for adjusting the high range

• Depending on the speaker, inputting low frequency component signals (about 2 kHz or less) with the H.P.F. adjustment could result in distortion. If so, set a steep slope (for example

30 dB/oct.).

When doing so, adjust so that the mid and high range sounds do not separate.

• Normally use with the L.P.F. off. If the high range is too strong, we recommend adjusting for a gentle slope.

Hint for adjusting the low range

• When a subwoofer is connected and you are using a speaker with a low range of under 10 or

12 cm (3-15/16” or 4-3/4”), setting the low range

H.P.F. to “OFF” can result in distortion when low frequency components are input.

If so, set the H.P.F. slope to a value suited for the speaker’s frequency response.

NOTES

• In order to protect the speakers, if Tweeter is selected in Front 1, there is no filter OFF (slope OFF) setting for H.P.F.

For the same reason, the subwoofer low pass filter cannot be turned off (the slope cannot be set to

“OFF”.)

• When the speaker is set to the “OFF” mode, the X-

OVER for that speaker is ineffective. Refer to

“Setting the speakers” (page 4).

• Check the playback frequencies of the connected speakers before adjusting.


17

-EN

EN

FR

ES

DE

IT

SE


MX B.C.

Rotary encoder

MX settings

ENTER

MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The radio, CD, and MP3, will be able to reproduce the music clearly even in cars with a lot of road noise.

FM: MX1 to 3 and OFF

The medium to high frequencies become more clear, and produces well balanced sound in all the bands.

CD: MX1 to 3 and OFF

CD mode processes a large quantity of data.

This data is used to reproduce the sound cleanly by making use of the data quantity.

MP3/XM: MX1 to 3 and OFF

This corrects information that was omitted at the time of compression. This reproduces a well-balanced sound close to the original.

DVD/Video CD: MOVIE MX 1~2, MUSIC, OFF

MOVIE MX 1~2: The dialogues of movies are played with greater clarity.

MUSIC: Discs containing music clips are played with a more dynamic sound.

AUX: MP3, MUSIC, MOVIE, OFF

Choose the MX mode (MP3, MUSIC, or

MOVIE) that corresponds to the media connected.

4

Once the settings are completed, press the MX button.

NOTES

• Operations cannot be performed when the defeat mode (page 28) is on.

• Each music source, such as radio, CD, and MP3 can have its own MX setting.

• If "MX OFF" is set in step 2, the MX mode is set to off for all music sources.

1 When “Auto” has been set as the MX mode setting (see page 27) while using the PXA-

H701 in combination with an Ai-NET head unit equipped with an automatic MX mode selection function (IVA-D300, etc.)

In this case, the MX mode is selected automatically according to the music source on the head unit. The MX mode can be set from the PXA-H701 using the operation described below.

1

Press the MX button to set the MX setting mode.

2

In case of “MX OFF”, press and hold the MX button for at least 2 seconds to turn the MX mode on.

3

Turn the Rotary encoder to select the desired mode, then press the ENTER button.

• When “OFF” is selected, the MX effect is turned off.

• The level for the currently selected music source (radio, CD, etc.) can be adjusted.

2 When combining non Ai-Net head unit products

When combining Ai-Net head unit products without MX interlocking function

When combining Ai-Net head unit products

(IVA-D300, etc.) with MX interlocking function considering that “MX mode setting” (page 27) is set to “Manual”.

In these cases, the PXA-H701 is not interlocked with the head unit, therefore it is necessary to set the MX from the PXA-H701 with the operations below.

1

Press the MX button to set the MX setting mode.

2

In case of “MX OFF”, press and hold the MX button for at least 2 seconds to turn the MX mode on.

18

-EN

3

Turn the Rotary encoder to select the source

(media) you want to set, then press the ENTER button.

4


For further information about setting mode, see step 3 of 1 (page 18).

NOTE

This function is equipped to work anywhere in the world, and it is possible to set to “DAB”. This mode is a specification developed for use abroad, but like

“MP3/XM", can have the same effect as “MX” . If set to “MD”, it also has the same effect as “MP3/XM”.

5

To set other sources (media), press the MX button and return to step 3.

6

Once the settings are completed, press the MX button repeatedly.

NOTES

• Operations cannot be performed when the defeat mode (page 28) is on.

• The source (media), such as radio, CD, and MP3 can be set.

• “MX OFF” can be set in step 2.

BASS COMP. setting

The sound of the low frequencies can be adjusted to suit your tastes.

1


(See page 28.)

2

Press the B.C. button to set the “BASS COMP.” setting mode.

3

In case of “BASS COMP. OFF”, press and hold the B.C. button for at least 2 seconds to turn the

BASS COMP. mode on.

4


As the bass level increases in order of BASS

COMP. 1, BASS COMP. 2, BASS COMP. 3, you can enjoy listening to the powerful sound.

5

Once the settings are completed, press the B.C. button.

NOTE

“BASS COMP. OFF” can be set in step 3.

19

-EN

EN

FR

ES

DE

IT

SE


ENTER

Rotary encoder

PLII/

REAR FILL

DISP

Using the Pro Logic II mode

With the PXA-H701, Pro Logic processing can be conducted on the music signals recorded on two channels to achieve Dolby Pro Logic II surround sound. For two-channel Dolby Digital and DTS signals, there is also a “REAR FILL” function for outputting the signals of the front channel to the rear channel.

1

Press the PLII/REAR FILL button and select the desired mode.

The setting mode is canceled if no operation is performed within 15 seconds after the mode is selected.

DOLBY PL II MOVIE DOLBY PL II MUSIC

OFF REAR FILL

DOLBY PL II MOVIE: Suits the stereo TV shows and all programs encoded in Dolby

Surround. It improves the sound field directivity to near that of discrete 5.1-channel sound.

DOLBY PL II MUSIC: Can be used for all stereo music recordings, and provides a wide, deep sound field.

* If DOLBY PL II MUSIC is selected, the center width can be adjusted with following operations.

This function offers the optimum vocal position by adjusting the center channel position between the center speaker and the L/R speaker. (The adjustments established in

“Adjusting the acoustic image” (page 24) are ineffective while this function is activated.)

1) After selecting DOLBY PL II MUSIC, within

15 seconds, press and hold the PLII/

REAR FILL button for at least 2 seconds.

2) Turn the Rotary encoder to select “Center

Width ON” or “Center Width OFF”, then press the ENTER button.

When the setting is turned ON, the optimum vocal position is offered by adjusting the center channel position between the center speaker and the L/R speaker.

3) Turn the Rotary encoder to adjust the level, then press the ENTER button.

The level can be adjusted between 0 to 7.

When the level increases, the center channel position moves from the center speaker position to both side.

4) After the setting, press and hold the

PLII/REAR FILL button for at least 2 seconds.

NOTES

• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of the player while making this adjustment. The setting is canceled if the decode mode is switched.

• This adjustment is ineffective if the center speaker is set to “OFF” or “Sub.W” in the speaker setup settings.

2

Once the settings are completed, press the DISP button.

NOTES

• This function only works with two-channel signals.

This operation is ineffective when 5.1-channel DTS or Dolby Digital signals are input.

• “REAR FILL” function

Depending on the input signals, the sound may only be output from the front speakers. In this case, the

“REAR FILL” function can be used to output signals from the rear speakers as well.

• If the setting of REAR FILL is made when REAR MIX is ON, sound is unchanged in the rear fill setting because REAR MIX is given priority during 2 channel decoder other than linear PCM.

• For linear PCM signals, the voice is output from the rear speaker regardless of the REAR FILL and REAR

MIX setting.

• Once the settings are made, we recommend storing them in the memory. See page 28 for instructions.

20

-EN

Adjustment procedure for Dolby Surround

Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy.

Adjustment procedure

1

Speaker setup (page 22)

(Turning the speakers to be used on and off and setting their response)

2 Adjusting the speaker levels (page 22)

(Adjusting the signal output level to the various speakers)

3

Mixing bass sound to the rear channel (page 23)

(Achieving smooth sound in the rear seat by mixing the front audio signals with the rear speaker signals)

4

Adjusting the acoustic image (page 24)

(Adjusting the acoustic image to achieve a sound as if the center speaker were directly in front of the listener)

5

Achieving powerful high volume sound (page 25)

(Achieving energetic sound with even greater power, like the sound in a movie theater)

6

Adjusting the DVD level (page 25)

(Adjust the volume (signal level) in the Dolby Digital, Pro Logic II, DTS and PCM modes.)

7

Storing settings in the memory (page 28)

(Storing all the settings and adjustments made on the PXA-H701 (not only the above settings/adjusts) in the memory)

NOTE

In case of combining the Automatic adjustments etc.

We recommend to make the Automatic adjustments before the Dolby Surround adjustments.

FR

ES

DE

IT

SE

21

-EN


CHANNEL

ENTER

Rotary encoder

SETUP

Speaker setup

The PXA-H701 can be set according to the playable frequency range of your speakers.

Check the playable frequency range of the speakers (not including the subwoofer) before performing this operation to verify whether the speakers can play low frequencies (of about 80

Hz or less).

NOTE

Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of the player while making this adjustment. The setting is canceled if the decode mode is switched.

1



2

Turn the Rotary encoder to select the “5.1CH

SETUP” mode, then press the ENTER button.

3

Turn the Rotary encoder to select the

“SPEAKER SETUP”, then press the ENTER button.

4

Press the CHANNEL button to select the speaker, then press the ENTER button.

Front Center Rear Sub. W

5

Turn the Rotary encoder to select the speaker property, then press the ENTER button.

Repeat steps 4 and 5 to set the various items.

* 1

OFF SMALL

*

LARGE

2

(Subwoofer is only ON/OFF.)

22

-EN

OFF:

When no speaker is connected

SMALL:

When a speaker that cannot play low frequencies (80 Hz or less) is connected

LARGE:

When a speaker that can play low frequencies

(80 Hz or less) is connected

*1: It is not possible to set the front speakers to

“OFF”.

*2: If the front speakers are set to “SMALL”, the rear and center speakers cannot be set to

“LARGE”.

6


NOTES

• If the center speaker is turned "OFF", the center channel's audio signals are added to the audio signals output from the front speakers.

• If you set the speaker response to “OFF”, also set the speaker setting to “OFF”. (See page 4.)

• Perform the setup for all the speakers (“Front”,

“Center”,“Rear” and “Sub. W”). If not, the sound may not be balanced.

• When center is set to subwoofer, the setting is ineffective even if center is set with this function.


• Through changing the settings on each speaker, a change in the output of the other speakers may occur due to the setting requirements.

• When using the PRO LOGIC II, if the rear speaker is set to "LARGE", then there will be no output from the sub-woofer.

Adjusting the speaker levels

Use the PXA-H701’s test tones to make the volume adjustments of the different speakers.

When levels are equal, a strong sense of presence can be heard from the different speakers at the listening position.

NOTE


1



2



3

Turn the Rotary encoder to select “OUTPUT

LEVEL”, then press the ENTER button.

4

Turn the Rotary encoder to select “Auto”, then press the ENTER button. Test tone output is repeated for each of the different speaker channels. They will be repeated in the order shown below.

If no operation is performed for 2 seconds, the channel switches to the next channel.

L (Left front) C (Center) R (Right front)

LS (Left surround) RS (Right surround)

5

While the test tones are being produced from the speakers, turn the Rotary encoder to adjust so that the volume of the different speakers is equal.

• The adjustment range for the different speakers is ± 10 dB.

• Adjust based on the front speakers.

6


Adjusting the level for individual speakers

(manual)

1) At step 4 above, select “Manual”, then press the

ENTER button.

2) Press the CHANNEL button or ENTER button to select the speaker you wish to adjust.

3) Turn the Rotary encoder to adjust the output level.

4) Repeat steps 2) and 3) above to adjust the levels of the different speakers.

5) Press the SETUP button again to quit the setup mode.

NOTES

• If a speaker is set to the off mode, that speaker’s level adjustment cannot be made.

Refer to “Speaker setup” (page 22).


Mixing bass sound to the rear channel

This function mixes the front channel audio signals to the audio signals output from the rear speakers, improving the sound in the vehicle’s rear seat.

NOTE


1

Press the SETUP button.


2


SETUP” mode, then press the ENTER buton.

3

Turn the Rotary encoder to select “REAR MIX”, then press the ENTER button.

4

Turn the Rotary encoder to select “REAR MIX

ON” or “REAR MIX OFF”, then press the ENTER button.

When set to “ON”, the front audio signals are mixed into the audio signals output from the rear speakers.

FR

ES

5

Turn the Rotary encoder to adjust the level, then press the ENTER button.

The level can adjusted in five steps: –6, –3, 0, +3 and +6. The higher the level, the more bass is output from the rear speakers. (The effect differs according to the software (DVD, etc.).)

6

Once the settings are completed, press the

SETUP button repeatedly to quit the setup mode.

DE

NOTES

• This adjustment is ineffective when the rear speaker setup setting is set to “OFF”.

• For linear PCM signals, the voice is output from the rear speaker regardless of the REAR FILL and REAR

MIX setting.


IT

SE

23

-EN


5

Turn the Rotary encoder to adjust the level, then press the ENTER button.

The level can be adjusted within the range of –5 to +5. The higher the level, the more the position of the center speaker is shifted to the sides.

ENTER

6



Rotary encoder

SETUP

NOTES

• This adjustment is ineffective if the center speaker is set to “OFF” or “Sub.W” in the speaker setup settings.


Adjusting the acoustic image

In most installations, the center speaker must be placed directly between the front passenger and driver. Using this function, the center channel information is distributed to the left and right speakers. This creates an acoustic image simulating a center speaker directly in front of each listener. Adjusting the center width in

DOLBY PL II MUSIC (see “Using the Pro Logic II mode”, page 20), makes this function ineffective.

NOTE


1



2



3

Turn the Rotary encoder to select “BI-

PHANTOM”, then press the ENTER button.

4

Turn the Rotary encoder to select “BI-

PHANTOM ON” or “BI-PHANTOM OFF”, then press the ENTER button.

When set to “ON”, the center channel information is distributed to the left and right speakers. This creates an acoustic image simulating a center speaker directly in front of each listener.

24

-EN

Achieving powerful high volume sound

With Dolby Digital, the dynamic range is compressed so that powerful sound can be achieved at regular volume levels. This compression can be canceled to achieve an energetic sound with even greater power, like the sound in a movie theater.

NOTE

This function works only in the Dolby Digital mode.

1



2



3

Turn the Rotary encoder to select “LISTENING

MODE”, then press the ENTER button.

4

Turn the Rotary encoder to select “STANDARD” or “MAXIMUM”, then press the ENTER button.

STANDARD MAXIMUM

STANDARD:

For powerful sound at regular volume levels

MAXIMUM:

For powerful sound at high volumes

5


NOTES

• Keep the volume to a level at which sounds outside the vehicle can still be heard.

• This function may have no effect, depending on the type of software (DVD, etc.).


Adjusting the DVD level

The volume (signal level) for the Dolby Digital,

Pro Logic II, DTS and PCM modes can be set.

NOTE


1



2



3

Turn the Rotary encoder to select the “DVD

LEVEL”, then press the ENTER button.

4

Press the ENTER button to select the mode to be adjusted.

DOLBY D

(DOLBY DIGITAL)

DOLBY PL II DTS PCM

FR

ES

5

Turn the Rotary encoder to adjust the level.

The level can be adjusted in the range of –5 to

+5.

6

Repeat steps 4 and 5 to set the levels for the various modes.



NOTE

After making the settings, we recommend storing them in the memory. For instructions, see page 28.

DE

IT

SE

25

-EN


6


NOTE

For connection with navigation, refer to the

"Installation and Connections" (page 40).

ENTER

Linear PCM setting

The output when playing discs recorded in linear

PCM can be set to 2 or 3 channels.

Rotary encoder

SETUP

Navigation system voice guidance interruption (only when using the control unit sold separately)

When the navigation system is connected, make the navigation system’s voice guidance messages to interrupt the PXA-H701, then output from the front speaker.

1



2

Turn the Rotary encoder to select the “PCM


3

Turn the Rotary encoder to select “2ch Output” or “3ch Output”, then press the ENTER button.

2ch Output: 2ch output (L/R)

3ch Output: 3ch output (L/R/CENTER)

4


NOTE

This PCM mode is ineffective if the center speaker is set to “OFF” or “Sub.W” in the speaker setup settings.

1



2

Turn the Rotary encoder to select the “NAVI

MIX” mode, then press the ENTER button.

3

Turn the Rotary encoder to select “NAVI MIX

ON” or “NAVI MIX OFF”, then press the ENTER button.

When ON is set, the navigation system's voice guidance messages interrupts the PXA-H701.

4

Turn the Rotary encoder to adjust the “MIX

LEVEL” (volume level of navigation voice), then press the ENTER button.

The level can be adjusted from 1 to 15.

5

Turn the Rotary encoder and set “GUIDE

CONT.” to “2”, then press the ENTER button.

Do not use “1”.

26

-EN

Display settings

The display’s contrast and LCD (negative/ positive) can be adjusted.

1



2

Turn the Rotary encoder to select the “DISPLAY


3

Turn the Rotary encoder to adjust

“CONTRAST”, then press the ENTER button.

Adjust the contrast (color depth) between –8~+8 so that the display is easy to see.

4

Turn the Rotary encoder to perform the “LCD

MODE” setting, then press the ENTER button.

Set the display to “POSITIVE (Pos.)” or

“NEGATIVE (Neg.)” according to your tastes.

5



MX mode setting (Ai-NET connection)

Use this setting when using the PXA-H701 in combination with an Ai-NET head unit equipped with the automatic MX mode selection function

(for example, IVA-D300).

When the MX mode is set to “Auto”, the MX settings of the head unit (the MX modes for the different music sources) are sent to the PXA-

H701.

1



2

Turn the Rotary encoder to select the “MX


3

Turn the Rotary encoder to select “Auto” or

“Manual”, then press the ENTER button.

EN

FR

Auto:

When the PXA-H701 is used in combination with an Ai-NET head unit equipped with the automatic MX mode selection function (for example, IVA-D300), the MX settings of the head unit are sent to the PXA-H701.

In addition, the MX mode switches automatically according to the music source selected by the head unit.

Manual:

Perform the MX operations on the PXA-

H701.

4


ES

DE

IT

SE

27

-EN


Calling out stored values

1

Press any button from 1 to 6 to select the preset memory you want to call out (“MEMORY1” to

“MEMORY6”).

In the preset memory, numerous settings/ adjustments are stored. Therefore, it may take some time to access the stored preset memory.

DEFEAT 1~6 DISP

PRESE T MEM ORY 1

Storing settings in the memory

This function can store up to 6 adjustments/ settings.

The following adjustments/settings are stored in a preset memory. For more details, see each page for the below items.

Page 4: Speakers Setting / Pages 6 - 11: Time

Correction/Phase Switching/Bass Focus Setting /

Pages 12 - 14: Equalizer Adjustment / Pages 15 -

17: X OVER Adjustment / Pages 18 - 19: MX

Settings / Page 19: BASS COMP. Setting / Page

20: Pro Logic II Mode Setting/Center Width

Adjustment* / Pages 21 - 25: Dolby Surround adjustment* / Page 26: Linear PCM Setting*

* Depending on the signal input, there is no effect.

NOTE

This operation can only be performed when the defeat mode is turned off.

Defeat mode

1

Press the DEFEAT button.

All properties are made flat.

DEFEAT ON

1

Make the adjustment or setting you want to store in the memory.

2

Press and hold any button from 1 to 6 for at least

2 seconds to store the setting into preset memory (“MEMORY1” to “MEMORY6”).

2

Press the DEFEAT button again to cancel.

NOTES

• The “Parametric EQ”, “Graphic EQ”, “AUTO

TCR”, “TCR/phase switching”, “MX”, “X-OVER” and “BASS COMP. setting” operations cannot be performed when the defeat mode is turned on.

• To protect the speakers, the “X-OVER” setting does not change.

SAV E

PRESE T MEM ORY 2

NOTES

• This operation can only be performed when the defeat mode is turned off.

• The stored contents will not be deleted even when the battery power cord is detached.

28

-EN

Switching the display mode

1

Press the DISP button to select the desired display mode.

Spectrum analyzer display(1~3)

Display OFF

Input channel display

Example of input channel (When monaural surround signal (s) is not inputted)

I N P U T C H

L C R

P– 2 P

L s

L F E

S R s

Preset No.

Equalizer setting display

Displays whether the current EQ setting is graphic

EQ or parametric

EQ.

G: Graphic EQ

P: Parametric EQ

The display changes according to the input signals. The indicated items are highlighted when there is no input.

L: Left front channel

R:

C:

Ls:

Rs:

Right front channel

Center channel

Left surround channel

Right surround channel

S: Monaural surround signal

LFE: Low frequency deep bass signal

29

-EN

EN

FR

ES

DE

IT

SE


Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR

STEERING SYSTEMS TO MAKE GROUND

CONNECTIONS.

Warning

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

Failure to do so may result in fire or electric shock.

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM

THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED

IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT INSTALL THE MONITOR NEAR THE

PASSENGER SEAT AIR BAG.

If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the monitor to spring upwards causing an accident and injuries.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT

HINDER VEHICLE OPERATION, SUCH AS THE

STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

HAVE THE WIRING AND INSTALLATION DONE BY

EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

DO NOT DAMAGE PIPE OR WIRING WHEN

DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

USE SPECIFIED ACCESSORY PARTS AND INSTALL

THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place.

This may cause parts to become loose resulting in hazards or product failure.

30

-EN

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR

PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH

MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

• Be sure to disconnect the cable from the (–) battery post before installing your PXA-H701. This will reduce any chance of damage to the unit in case of a short-circuit.

• Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

• When making connections to the vehicle’s electrical system, be aware of the factory installed components

(e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the

PXA-H701 to the fuse box, make sure the fuse for the intended circuit of the PXA-H701 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your

ALPINE dealer.

• The PXA-H701 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

FR

ES

Wiring Connections

Improper wiring connections could cause serious damage to your audio system. Be sure you:

1. DO NOT connect (–) wires from left and right speakers together.

2. DO NOT ground any speaker wires.

3. DO NOT run wires where they may be pinched or cut.

4. DO NOT leave bare speaker terminals exposed. They may contact the vehicle chassis and cause a short.

DE

Fuse

When replacing the fuse(s), the replacement fuse must be of the same amperage as shown on the fuse holder. If the fuse(s) blows more than once, carefully check all electrical connections for shorted circuitry. Also have your vehicle’s voltage regulator checked. Do not attempt to repair the unit yourself; return it to your Alpine dealer or nearest Alpine Service Station for servicing.

IT

Temperature

In order to ensure proper performance, be sure the temperature in your vehicle is above 14

°F (–10°C) and below 140

°F (60°C) before turning your unit on. Good air circulation is essential to prevent internal heat build-up in the unit.

SE

31

-EN


Accessories

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

Ai-NET cable Connection Cable Velcro fastener for mounting control unit or base unit

x 2

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

Flanged selftapping screw

(M4 x 14)

To prevent external noise from entering the audio system.

• Locate the unit and route the leads at least 10 cm away from the car harness.

• Keep the battery power leads as far away from other leads as possible.

• Connect the ground lead securely to a bare metal spot

(remove any paint, dirt or grease if necessary) of the car chassis.

• If you add an optional noise suppressor, connect it as far away from the unit as possible.

Your Alpine dealer carries various noise suppressors.

Contact them for further information.

• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

x 4

32

-EN

Installation

Mounting the control unit (Sold Separately)

CAUTION:

Do not install the control unit near the air-bag of the front passenger’s seat.

• Confirm the installation location will be safe.

• Determine the mounting position on the dashboard. The area should be large enough to center the unit and reasonably flat.

Installation using Velcro fastener

3

Mount the control unit using the included screws.

Bracket

Spacer

Control unit

4

Mount the previously removed inner case into the dashboard. Slide the control unit into the case.

Dashboard

Dashboard

Pan head screw

(M3 x 5) x 2

FR

Velcro fastener

Control unit

Inner case

1. Without separating the two pieces of Velcro fastener, peel off the paper backing on one side and place on the back of the control unit.

2. Make sure the location selected is free from moisture or dirt. Peel off the backing paper from the other side of the Velcro fastener on the control.

3. Place the control unit on the mounting location and press the unit firmly to mount securely.

Mounting other units

1

Remove the face plate.

Face plate

<JAPANESE CAR>

1

After step 2 on “Mounting other units” of

“Mounting the control unit”, remove the side bracket.

Side bracket

Face plate

ES

DE

Side bracket

2

Mount the control unit using the included screws.

IT

Bracket

Spacer

Control unit

2

Use a screwdriver, etc., to slide the locking pin, then take out the inner case.

Pan head screw

(M3 x 5) x 2 SE

Inner case

Locking pin

33

-EN


3

Mount the spacer and bracket to the control unit.

Next, securely mount the factory brackets

4

Mount the spacer on the control unit using the included screws.

removed from the factory radio, to the control unit assembly.

Spacer

Flat head screws (M5 x 8)

Control unit

Bracket

Flush Mounting the control unit

1

Make a cut-out approximately 178 (width) by 50

(height) mm (7 inches by 2 inches) in size at your desired mounting location.

WARNING

When making cut-outs, be careful not to damage pipes, tanks, electric wires, etc. Doing so could lead to accidents or fire.

2

After step 2 on “Mounting other units” of

“Mounting the control unit” page 33, remove the side bracket.

Side bracket

Pan head screw

(M3 x 5) x 2

5

Attach the flush mount brackets to the control unit using the included screws. Mount this assembly into the prepared cut-out.

Flush mount

Face plate

Self-tapping screw

(M2.6 x 8) x 4

Side bracket

3

Remove the spacer from the bracket.

Bracket

Spacer

34

-EN

Mounting the base unit

● Velcro Fastener Mounting

Velcro fastener

Attach to the vehicle (such as under the dashboard).

● Using the Mounting Screws (Supplied)

The Base Unit can be mounted under the seat using the mounting screws.

1

Decide on the installation location.

• The trunk, etc., is the best place.

2

Mark the positions of the mounting screws at the chosen location.

3

Drill 3 mm (1/8”) holes or smaller.

WARNING

When making holes, be careful not to damage pipes, tanks, electric wires, etc. Doing so could lead to accidents or fire.

FR

4

Securely mount the unit using the four included flanged self-tapping screws (M4 x 14).

Flanged self-tapping screw (M4 x 14)

ES

DE

IT

SE

35

-EN


Basic Connections Diagram

Display

(Sold Separately)

CAUTION

Do not connect or disconnect the display cable when the power of the unit is on.

Terminal specifications

• Head unit input terminal (optical digital input)

Used for system expansion (Ai-NET head unit, etc.).

• Changer input terminal (optical digital input)

Used for system expansion (Ai-NET changer, etc.).

• DVD player input terminal (optical digital input)

Used for system expansion (DVD player, etc.).

Connect to:

Connect to an Ai-NET product using an optical fiber cable.



(L)

CENTER

SELECTABLE

SUBWOOFER

(R)

FRONT 1

(FULL RANGE

/TWEETER)

FRONT 2 REAR SUBWOOFER

CONTROL UNIT

OUTPUT

MIC

CD/DVD H.U.

DIGITAL 1

CHG

DIGITAL 2

DVD

DIGITAL 3

INPUT GUIDE (L) (R)

ANALOG 1

Ai–NET IN

ANALOG 2

CHANGER IN

ANALOG 3

POWER SUPPLY

Fuse

(3A)

Cord colors and cord/terminal specifications

Blue/

White

• Remote ON cable

Connect to the head unit for RCA connections.

(Non Ai-NET connection)

Blue/

White

• Remote OUT cable

Connect to the amplifier or other peripheral device.

Connect to:

Used for RCA connections.

(Non Ai-NET connection)

Used to add an amplifier.

White/

Green

• Guide control cable

Used to interrupt the navigation system’s sound.

Black

• Ground cable

Connect securely to a metal part of the vehicle’s body.

Connect to the navigation system.

Yellow

• Battery power cable

Power is supplied constantly to the PXA-H701 regardless of whether the engine key is on or off.

Connect this lead to the positive(+) post of the vehicle's battery.

Connect to the vehicle’s body.

• Changer input terminal (Ai-NET input)

Used for system expansion (Ai-NET changer, etc.).

• Ai-NET input terminal (Ai-NET input)

Used for system expansion (DVD player, etc.).

• Audio input jacks (RCA inputs)

Used to input the audio output signals of a head unit connected with RCA connections to the PXA-H701.

• Navigation audio input jack (RCA input)

Used to input the audio output signals of a navigation system.

• Microphone jack

Use this to connect a microphone.

Connect to an Ai-NET product using an Ai-NET cord.

For connection to the PXA-H701, use the straight side.

Connect to an Ai-NET product using an Ai-NET cord.

For connection to the PXA-H701, use the straight side.

Used for RCA connections.

Connect to the head unit.

Connect to the navigation system.

Used for automatic adjustment.

• Center speaker or subwoofer output jack (RCA output)

Outputs signals for driving the center speaker or subwoofer.

Connect to the amplifier for the center speaker or subwoofer.

• Subwoofer output jack (RCA outputs)

Outputs signals for driving the subwoofer.

• Rear speaker output jacks (RCA outputs)

Outputs signals for driving the rear speakers.

• Front 2 speaker output jacks (RCA outputs)

Outputs signals for driving the front 2 speakers.

• Front 1 speaker output jacks (RCA outputs)

Outputs signals for driving the front 1 speakers.

Connect to the amplifier for the subwoofer.

Connect to the amplifier for the rear speaker.

Connect to the amplifier for the front 2 speaker.

Connect to the amplifier for the front 1 speaker.

36

-EN

Examples of system expansion

• PXA-H701 + Ai-NET Compatible Head Unit + DVD Changer +

Monitor + External Amplifier

(L)

CENTER

SELECTABLE

SUBWOOFER

(R)

FRONT 1

(FULL RANGE

/TWEETER)


CONTROL UNIT

OUTPUT

MIC

CD/DVD H.U.

DIGITAL 1

CHG

DIGITAL 2

DVD

DIGITAL 3


ANALOG 1

Ai–NET IN

ANALOG 2

CHANGER IN

ANALOG 3

POWER SUPPLY

Fiber Optic Cable (Sold Separately)

★

Monitor

(TME-M790 etc.)

Remote Control Output Cable

(White/Brown)

To Video Input Jack

RCA Connection Cable

Fiber Optic Cable (Included with DVD Changer)

Remote Control

Input Cable

(White/Brown)

Ai-NET Cable (Included with DVD Changer)

Ai-NET Cable (Included)

To Video Output Jack

DVD Changer

Ai-NET Compatible

Head Unit

System Switch

FR

ES

Blue/White

Remote OUT Cable

Blue/White

Remote ON Cable

White/green

Guide Control Cable

Grounding Cable

Battery Power Cable

To External Amplifier Remote ON Cable

Not used in this system


Connect to a metal part of chassis body with a screw.

Battery

Center Output or Subwoofer Output (L)*

Subwoofer Output or Subwoofer Output (R)*

Rear Output (L)

Rear Output (R)

Front 2 Output (L)

Front 2 Output (R)



To External Amplifier

* When the subwoofer is connected to the center speaker output jack, it becomes subwoofer output (L or R).

In this case, change the setting of the center speaker to subwoofer in “Setting the speakers”

(page 4).

NOTE

Please observe the following when using Fiber Optic Cable.

• Do not coil the Fiber Optic Cable smaller than a 30mm radius.

• Do not place anything on top of the Fiber Optic Cable.

NOTE

★ Used for connection to an optical digital compatible head unit.

37

-EN

DE

IT

SE


• PXA-H701 + Ai-NET Compatible Head Unit + CD Changer +

External Amplifier


★★


★

Ai-NET Cable (Included with CD Changer)


★★★


CD Changer

(L)

CENTER

SELECTABLE

SUBWOOFER

(R)

FRONT 1

(FULL RANGE

/TWEETER)


CONTROL UNIT

OUTPUT

MIC

CD/DVD H.U.

DIGITAL 1

CHG

DIGITAL 2

DVD

DIGITAL 3


ANALOG 1

Ai–NET IN

ANALOG 2

CHANGER IN

ANALOG 3

POWER SUPPLY


Head Unit

System Switch

Blue/White


Blue/White

Remote ON Cable

White/green


Grounding Cable






Battery



Rear Output (L)

Rear Output (R)








(page 4).

NOTE

Please observe the following when using Fiber Optic Cable.



38

-EN

NOTES

★

When connecting a Optical Digital CD

Changer

★★ Used for connection to an optical digital compatible head unit.

★★★ When connecting a Optical Digital CD

Changer, change the Digital/Analog switch of the CD Changer to “2”

(Digital Output)

1 2

• PXA-H701 + Head Unit + Video Deck etc. + External Amplifier

• For connecting a head unit with which Ai-NET connections are not possible.

Blue/White

Remote ON Cable

Blue/White

* Remote OUT cable

RCA connection cable

Ai-RCA Conversion Cable

(Sold Separately)


Head Unit

TV Tuner,

Video etc.

Audio

Output

(L)

CENTER

SELECTABLE

SUBWOOFER

(R)

FRONT 1

(FULL RANGE

/TWEETER)


CONTROL UNIT

OUTPUT

MIC

CD/DVD H.U.

DIGITAL 1

CHG

DIGITAL 2

DVD

DIGITAL 3


ANALOG 1

Ai–NET IN

ANALOG 2

CHANGER IN

ANALOG 3

POWER SUPPLY

FR

Blue/White


White/green


Grounding Cable





Battery



Rear Output (L)

Rear Output (R)








(page 4).

ES

DE

IT

NOTE

When using the PXA-H701 with a non-Ai-NET head unit, +12V is required on this line * to turn on the equalizer. If your head unit does not have a remote-on or power-antenna turn-on wire, an SPST switch must be connected between an ignition source and this terminal. The PXA-H701 can then be turned on using this switch.

The PXA-H701 can be used with any head unit. However, only an Alpine Ai-NET compatible head unit will be able to take full advantage of all the features and functions of this processor.

39

-EN

SE


• PXA-H701 + IVA-D300 Head Unit + CD Changer + Navigation

System + External Amplifier

White/Green


White/Green



NAVIGATION

INPUT

NTSC RGB

VIDEO OUTPUT

GUIDE OUTPUT

NTSC VIDEO

OUTPUT RGB OUTPUT REMOTE INPUT

KCE-900E


RGB Cable


Navigation


Fiber Optic Cable


★

Ai-NET Cable

(Included with CD Changer)

IVA-D300

Head Unit

★★


CD Changer


(L)

CENTER

SELECTABLE

SUBWOOFER

(R)

FRONT 1

(FULL RANGE

/TWEETER)


CONTROL UNIT

OUTPUT

MIC

CD/DVD H.U.

DIGITAL 1

CHG

DIGITAL 2

DVD

DIGITAL 3

INPUT GUIDE (L)

ANALOG 1

(R)

Ai–NET IN

ANALOG 2

CHANGER IN

ANALOG 3

POWER SUPPLY

Blue/White


Blue/White

Remote ON Cable

Grounding Cable





Battery



Rear Output (L)

Rear Output (R)





To External

Amplifier

NOTE

Also refer to the operating instructions of the KCE-900E. For details, contact your store of purchase or an Alpine Information

Center.

Please observe the following when using Fiber Optic

Cable.




In this case, change the setting of the center speaker to subwoofer in “Setting the speakers” (page 4).

NOTES

★

When connecting a Optical Digital CD

Changer

★★ When connecting a Optical

Digital CD Changer, change the Digital/Analog switch of the CD Changer to “2”

(Digital Output)

1 2

40

-EN

Information

Terminology

Dolby Digital

Dolby Digital is a digital audio compression technology developed by Dolby Laboratories that allows large quantities of audio data to be efficiently recorded on discs. It is compatible with audio signals from mono (1 channel) all the way up to 5.1-channel surround sound. The signals for the different channels are completely independent, and since the sound is high quality digital there is no loss of sound quality.

Dolby Pro Logic II

Dolby Pro Logic II provides multichannel surround sound from any 2 channel source. It reproduces extended bandwidth playback with 5.1 channels.

This is made possible by an advanced matrix surround decoder. This new decoder is able to draw out spatial characteristics of the recording without adding tonal coloration or artificial delays that did not exist in the original.

EN

Linear PCM audio (LPCM)

LPCM is a signal recording format used for music

CDs. Whereas music CDs are recorded at 44.1 kHz/

16 bits, DVDs are recorded at 48 kHz/16 bits to 96 kHz/24 bits, thereby achieving higher sound quality than music CDs.

FR

Center speaker

Front speakers

Rear speakers

ES

Subwoofer DE

Speaker layout for enjoying

Dolby Digital sound/DTS sound

DTS

This is a home-use digital sound format of the DTS

Sound System. This is a high quality sound system, developed by Digital Theater Systems Corp for use in movie theaters.

DTS has six independent sound tracks. The theater presentation is fully realized in the home and other settings. DTS is the abbreviation for Digital Theater

Systems.

IT

SE

41

-EN

Others

In case of difficulty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Set does not operate.

Nothing appears on the display.

• Vehicle’s ignition key is turned off.

- Turn the vehicle’s ignition key on.

• Set’s power is not turned on.

- Turn the vehicle’s ignition key on then turn on the power of the head unit.

• Power cord is not securely connected.

- Connect the power cord securely.

• Fuse is blown.

- Replace with a fuse of the specified capacity.

• Display mode is set to off.

- Switch the display to another mode.

(Page 29)

Power is on but no sound is produced.

• Volume level is set to the minimum.

- Increase the volume level. (Page 5)

• Input mode is set to a mode to which nothing is connected.

- Set to a connected mode. (Page 5)

No sound is produced from the speakers.

• Cords are not securely connected.

- Connect the cords securely.

• Speaker is set to the off mode.

- Set the speaker to the on mode. (Pages 4 and 22)

Speaker setup settings cannot be made.

• Front speakers are set to “SMALL”.

- Set the front speakers to “LARGE”. (Page 22)

Sound cannot be adjusted.

• Defeat is set to the on mode.

- Set defeat to the off mode. (Page 28)

Caution when connecting the DVA-5205/

DVA-5200/DHA-S680

Although the adjustment screen such as EQ and

TCR on the audio processor are available in DVA-

5205/DVA-5200/DHA-S680, these adjustments cannot be made when they are connected to the

PXA-H701.

42

-EN

Specifications

Graphic EQ number of bands:

Front (left and right)

Rear (left and right)

31 bands

31 bands

Center

Subwoofer

Graphic EQ boost cut range: ±9 dB

Parametric EQ number of bands:

31 bands

10 bands

Front/rear/center 5 bands

Subwoofer 2 bands

Parametric EQ frequency:

Front, Rear and Center

Band 1: 20/22/25/28/31.5/36/40/45/50/56/

63/71/80/90/100/110/125/140/160/

180/200/220/250/280/315/360/400/

Band 2:

450/500 (Hz)

50/56/63/71/80/90/100/110/125/

140/160/180/200/220/250/280/315/

360/400/450/500/560/630/710/800/

Band 3:

Band 4:

900/1k/1.1k/1.2k (Hz)

125/140/160/180/200/220/250/280/

315/360/400/450/500/560/630/710/

800/900/1k/1.1k/1.2k/1.4k/1.6k/

1.8k/2k/2.2k/2.5k/2.8k/3.2k (Hz)

315/360/400/450/500/560/630/710/

800/900/1k/1.1k/1.2k/1.4k/1.6k/

1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/

Band 5:

4.5k/5k/5.6k/6.3k/7.1k/8k (Hz)

800/900/1k/1.1k/1.2k/1.4k/1.6k/

1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/

4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/

11k/12.5k/14k/16k/18k/20k (Hz)

Subwoofer

Band 1: 20/22/25/28/31.5/36/40/45/50/56/

63/71/80 (Hz)

Band 2: 50/56/63/71/80/90/100/110/125/

140/160/180/200 (Hz)

Parametric EQ boost cut range: ±9 dB

Time correction control range: 0 to 20 ms (0.05 ms steps)

Frequency response: 10 Hz to 24 kHz

S/N ratio: 100 dB (IHF-A)

Channel separation: 80 dB

Input sensitivity: 850 mV (2V for analog 1 only)

Subwoofer crossover: 20 to 200 Hz (1/6 oct. steps)

Rated output: 4V (with 10 k ohms load)

Input impedance:

Output impedance:

Weight:

10 k ohms or greater

1 k ohm or less

Control unit (sold separately)

159 g (5 oz)

Base unit 1.1 kg (2 lbs. 6 oz)

Dimensions

Control unit (sold separately)

Width 170 mm (6-3/4")

Height

Depth

Base unit

Width

46 mm (1-13/16")

24 mm (15/16")

260 mm (10-3/16")

Height

Depth

40 mm (1-9/16")

160 mm (6-1/4")

<Components>

Parts name Quantity

Parts for mounting ................................ 1set

Owner’s manual .................................... 1set

Due to continuous product improvement, specifications and design are subject to change without notice.

The illustrations included in these instructions may appear different from the actual product due to printing conditions.

“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

EN

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories.

All rights reserved.

FR

ES

DE

IT

SE

43

-EN

GARANTIE LIMITÉE

Fidèles à leur engagement de ne fournir que des produits de qualité, ALPINE ELECTRONIQUE DE L'AMERIQUE INC. et

ALPINE ELECTRONIQUE DU CANADA INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggérons de le lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter l'un de nos concessionnaires ou appeler directement Alpine au numéros Liste ci-dessous.

● PRODUITS COUVERT PAR LA GARANTIE

Cette garantie couvre les produits audio/visuel de voiture et les accessoires connexes ("le produit"). Elle ne couvre les produits que dans le pays où il ont été achetés.

● DURÉE DE LA GARANTIE

Cette garantie est en vigueur pendant un an à partir de la date du premier achat du client.

● GARANTIE À VIE DES TÊTES DE LECTURE DES

MAGNÉTOPHONES À CASSETTES

Toutes les têtes de cassettes analogiques audio de voiture

Alpine, à l’exception des êtes de cassettes vidéo sont garanties à vie contre des vices de fabrication pouvant entraîner leur panne.

● PERSONNES PROTÉGÉES PAR LA GARANTIE

Seul l'acheteur original du produit, s'il résisde aux États-Unis,

à Porto Rico ou au Canada, peut se prévaloir de la garantie.

● CE QUI EST COUVERT

Cette garantie couvre tous les défauts de matériaux et de fabrication (pièces et main d'œuvre) du produit.

● CE QUI N'EST PAS COUVERT

Cette garantie ne couvre pas ce qui suit:

1 Les dommages survenus durant le transport des produits renvoyés à Alpine pour être réparés (les réclamations doivent être adressées au transporteur);

2 Tout dégât provoqué par accident, abus, négligence, usage inapproprié, mauvais raccordement, mauvaise utilisation ou par le non-respect des instructions indiquées dans le manuel de l’utilisateur.

3 Les dommages dus à la force majeure, notamment aux tremblements de terre, au feu, aux inondations, aux tempêtes ou aux autres cataclysmes naturels;

4 Les frais ou les dépenses relatifs à l'enlèvement ou à la réinstallation du produit;

5 Les services rendus par une personne, physique ou morale non autorisée;

6 Les produits dont le numéro de série a été effacé, modifié ou retiré;

7 Les produits qui ont été adaptés ou modifiés sans le consentement d'Alpine;

8 Les produits qui ne sont pas distribués par Alpine aux

Etats-Unis, à Porto Rico ou au Canada;

9 Les produits qui n'ont pas été achetés par l'entremise d'un concessionnaire Alpine autorisé; p Tout produit qui a été déterminé comme contenant une quantité excessive de poussière ou de saleté et tout produit qui contient d’autres saleté, en ce compris du liquide et des corps étrangers.

● COMMENT SE PRÉVALOIR DE LA GARANTIE

1 Il vous faut remettre le produit nécessitant des réparations

à un centre de service autorisé Alpine ou à Alpine même et en assumer les frais de transport. Alpine a le choix entre réparer le produit ou le remplacer par un produit neuf ou révisé, le tout sans frais pour vous. Si les réparations sont couvertes par la garantie et si le produit a été envoyé à un centre de service Alpine ou à Alpine, le paiement des frais de réexpédition du produit incombe Alpine.

2 Vous devez donner une description détaillée des problèmes qui sont à l'origine de votre demande de réparation.

3 Vous devez joindre la preuve de votre achat du produit.

4 Vous devez emballer soigneusement le produit pour éviter tout dommage durant son transport.

● LIMITATION DES GARANTIES TACITES

LA DURÉE DE TOUTES LES GARANTIES TACITES, Y

COMPRIS LA GARANTIE D'ADAPTATION A L'UTILISATION

ET LA GARANTIE DE QUALITÉ LOYALE ET MARCHANDE,

EST LIMITÉE À CELLE DE LA GARANTIE EXPRESSE

DÉTERMINÉE CI-DESSUS. PERSONNE N'EST AUTORISÉ

À ENGAGER AUTREMENT LA RESPONSABILITÉ D'ALPINE

EN VERTU DE LA VENTE D'UN PRODUIT.

● EXCLUSIONS DE LA GARANTIE

ALPINE STIPULE EXPRESSÉMENT QU'ELLE N'EST PAS

RESPONSABLE DES DOMMAGES DOMMAGES-INTÉRÊTS

ET DOMMAGES INDIRECTS PROVOQUÉS PAR LE

PRODUIT. LES DOMMAGES DOMMAGES-INTÉRÊTS

SONT LES FRAIS DE TRANSPORT DU PRODUIT VERS UN

CENTRE DE SERVICE ALPINE, LA PERTE DE TEMPS DE

L'ACHETEUR ORIGINAL, LA PERTE D'UTILISATION DU

PRODUIT, LES BILLETS D'AUTOBUS, LA LOCATION DE

VOITURES ET TOUS LES AUTRES FRAIS LIÉS À LA

GARDE DU PRODUIT.

LES DOMMAGES INDIRECTS SONT LES FRAIS DE

RÉPARATION OU DE REMPLACEMENT D'AUTRES BIENS

ENDOMMAGÉS SUITE AU MAUVAIS FONCTIONNEMENT

DU PRODUIT.

LES RECOURS PRÉVUS PAR LES PRÉSENTES

EXCLUENT ET REMPLACENT TOUTE AUTRE FORME DE

RECOURS.

● LIEN ENTRE LA GARANTIE ET LA LOI

La garantie vous donne des droits spécifiques, mais vous pouvez aussi jouir d'autres droits, qui varient d'un état ou d'une province à l'autre. En outre, certains états et certaines provinces interdisent de limiter la durée des garanties tacites ou d'exclure les dommages accessoires ou indirects. Dans ce cas, les limites et les exclusions de la garantie peuvent ne pas s'appliquer à vous.

● CLAUSE APPLICABLE AU CANADA SEULEMENT

Pour que la garantie soit valable, il faut qu'un centre d'installation autorisé ait installé le système audio pour l'auto dans votre véhicule et qu'il ait ensuite apposé son cachet sur la garantie.

● NUMÉROS D'APPEL DU SERVICE À LA CLIENTELE

Si vous avez besoin de nos services, veuillez appeler le centre de service autorisé Alpine le plus proche.

U.S.A.

1-800-ALPINE-1 (1-800-257-4631)

CANADA 1-800-ALPINE-1 (1-800-257-4631)

Alpine Électronique de L'Amérique, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.

Alpine Électronique du Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada

LIMITED WARRANTY

ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.

● PRODUCTS COVERED:

This Warranty covers Car Audio/Visual Products and

Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. Products purchased in the U.S.A. are covered only in the U.S.A.

● LENGTH OF WARRANTY:

This Warranty is in effect for one year from the date of the first consumer purchase.

● LIFETIME TAPE HEAD WARRANTY:

All Alpine Car Audio analog tape heads excluding Video tape heads are warranted for life against manufacturing defects causing failure.

● WHO IS COVERED:

This Warranty only covers the original purchaser of the product, who must reside in the United States, Puerto Rico or Canada.

● WHAT IS COVERED:

This Warranty covers defects in materials or workmanship

(parts and labor) in the product.

● WHAT IS NOT COVERED:

This Warranty does not cover the following:

1 Damage occurring during shipment of the product to

Alpine for repair (claims must be presented to the carrier).

2 Damage caused by accident, abuse, negligence, misuse, improper connections, improper operation or failure to follow instructions contained in the Owner's manual.

3 Damage caused by act of God, including without limitation, earthquake, fire, flood, storms or other acts of nature.

4 Any cost or expense related to the removal or reinstallation of the product.

5 Service performed by an unauthorized person, company or association.

6 Any product which has the serial number defaced, altered or removed.

7 Any product which has been adjusted, altered or modified without Alpine's consent.

8 Any product not distributed by Alpine within the United

States, Puerto Rico or Canada.

9 Any product not purchased from an Authorized Alpine

Dealer.

p Any product that has been determined to contain an excessive amount of dust or dirt and any product that contains other contaminants including liquid or foreign objects.

● HOW TO OBTAIN WARRANTY SERVICE:

1 You are responsible for delivery of the product to an

Authorized Alpine Service Center or Alpine for repair and for payment of any initial shipping charges. Alpine will, at its option, repair or replace the product with a new or reconditioned product without charge. If the repairs are covered by the warranty, and if the product was shipped to an Authorized Alpine Service Center or

Alpine, Alpine will pay the return shipping charges.

2 You should provide a detailed description of the problem(s) for which service is required.

3 You must supply proof of your purchase of the product.

4 You must package the product securely to avoid damage during shipment.

● HOW WE LIMIT IMPLIED WARRANTIES:

ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR

USE AND MERCHANTABILITY ARE LIMITED IN

DURATION TO THE PERIOD OF THE EXPRESS

WARRANTY SET FORTH ABOVE AND NO PERSON IS

AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE OF THE

PRODUCT.

● HOW WE EXCLUDE CERTAIN DAMAGES:

ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR

INCIDENTAL AND CONSEQUENTIAL DAMAGES

CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL

DAMAGES" REFERS TO EXPENSES OF

TRANSPORTING THE PRODUCT TO THE ALPINE

SERVICE CENTER, LOSS OF THE ORIGINAL

PURCHASER'S TIME, LOSS OF THE USE OF THE

PRODUCT, BUS FARES, CAR RENTALS OR OTHERS

COSTS RELATING TO THE CARE AND CUSTODY OF

THE PRODUCT. THE TERM "CONSEQUENTIAL

DAMAGES" REFERS TO THE COST OF REPAIRING OR

REPLACING OTHER PROPERTY WHICH IS DAMAGED

WHEN THIS PRODUCT DOES NOT WORK PROPERLY.

THE REMEDIES PROVIDED UNDER THIS WARRANTY

ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.

● HOW STATE/PROVINCIAL LAW RELATES TO THE

WARRANTY:

This Warranty gives you specific legal rights, and you may also have other rights which vary form state to state and province to province. In addition, some states/provinces do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you.

● IN CANADA ONLY:

This Warranty is not valid unless your Alpine car audio product has been installed in your vehicle by an Authorized

Installation Center, and this warranty stamped upon installation by the installation center.

● HOW TO CONTACT CUSTOMER SERVICE:

Should the product require service, please call the following number for your nearest Authorized Alpine Service Center.

U.S.A.

1-800-ALPINE-1 (1-800-257-4631)

CANADA 1-800-ALPINE-1 (1-800-257-4631)

Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.

Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada

Alpine PXA-H701 Owner's Manual 48 Pages

Alpine PXA-H701 Owner's Manual

MULTIMEDIA MANAGER™

• OWNER'S MANUAL

Please read before using this equipment.

• MODE D'EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

ENGLISH

Before using

The control unit for the PXA-H701 is sold separately. The operation method using this control unit (sold separately) is printed in this instruction manual.

However, if you use head units such as the IVA-D300 or the IVA-D900, you can also operate the PXA-H701 from these head units (Items such as AUTO

TCR and navigation system voice guidance interruption settings can only be operated from the Control Unit). For more details on the head unit operation, see "External Audio Processor (Optional) in the instruction manual for the head unit.

Contents

WARNING

WARNING .................................................. 2

CAUTION ................................................... 2

PRECAUTIONS ......................................... 3

Basic Operation

Automatic Adjustments

Settings/Adjustments

Using Dolby Surround

Convenient Functions

Installation and Connections

Information

Others

LIMITED WARRANTY

WARNING

CAUTION

DO NOT OPERATE ANY FUNCTION THAT TAKES

YOUR ATTENTION AWAY FROM SAFELY DRIVING

YOUR VEHICLE.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN

STILL HEAR OUTSIDE NOISE WHILE DRIVING.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

DO NOT DISASSEMBLE OR ALTER.

USE THIS PRODUCT FOR MOBILE 12V

APPLICATIONS.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

PRECAUTIONS

Temperature

Installation Location

Maintenance

Turning the power on and off

About indicators

Operating the Rotary encoder

Setting the speakers

Using with Ai-NET connections

Using with RCA-type or optical cable connections (non Ai-NET connections)

(only when using the control unit sold separately)

Performing time correction automatically

(Automated Time Correction)

10 sec .

ERROR

Performing time correction manually

(TCR)/Switching the phase

Bass Focus

Graphic equalizer adjustments

Parametric equalizer adjustments

X-OVER

X-OVER adjustment

MX settings

BASS COMP. setting

Using the Pro Logic II mode

Adjustment procedure for Dolby Surround

Speaker setup

Adjusting the speaker levels

Mixing bass sound to the rear channel

Adjusting the acoustic image

Achieving powerful high volume sound

Adjusting the DVD level

Linear PCM setting