Volvo 2011, 2011 S80 Owner's manual

Volvo 2011, 2011 S80 Owner's manual
VOLVO S80
Owners Manual
Web Edition
DEAR VOLVO OWNER
THANK YOU FOR CHOOSING VOLVO
We hope you will enjoy many years of driving pleasure in your Volvo.
The car has been designed for the safety and comfort of you and your
passengers. Volvo is one of the safest cars in the world. Your Volvo
has also been designed to satisfy all current safety and environmental
requirements.
In order to increase your enjoyment of the car, we recommend that
you familiarise yourself with the equipment, instructions and maintenance information contained in this owner's manual.
Table of contents
00 01 02
4
00 Introduction
01 Safety
Important information................................. 8
Volvo and the environment....................... 11
Seatbelts ..................................................
Airbags......................................................
Activating/deactivating the airbag*...........
Side airbags (SIPS bags) .........................
Inflatable Curtain (IC) ...............................
WHIPS ......................................................
When the systems deploy ........................
Safety mode..............................................
Child safety...............................................
* Option/accessory, for more information, see Introduction.
02 Locks and alarm
16
19
22
24
26
27
29
30
31
Remote control key/key blade..................
Privacy locking*.........................................
Battery replacement, remote control key/
PCC*.........................................................
Keyless drive*............................................
Locking/unlocking.....................................
Child safety locks......................................
Alarm*.......................................................
40
45
46
48
51
55
56
Table of contents
Bluetooth handsfree*.............................. 203
Built-in phone*........................................ 208
03 04 04
03 Your driving environment
04 Comfort and driving pleasure
Instruments and controls.......................... 60
Instruments and controls - Executive ...... 68
Key positions............................................ 69
Seats......................................................... 71
Seats - Executive...................................... 75
Steering wheel.......................................... 77
Lighting..................................................... 78
Wipers and washing.................................. 87
Windows, rearview and door mirrors........ 89
Compass*................................................. 94
Power sunroof*......................................... 95
Alcoguard*................................................ 97
Starting the engine.................................. 101
Starting the engine – Flexifuel................. 103
Starting the engine – external battery..... 105
Gearboxes............................................... 106
All-wheel drive – AWD*........................... 112
Foot brake............................................... 113
Parking brake.......................................... 115
Menus and messages............................. 124
Climate control........................................ 130
Fuel-driven engine block heater and passenger compartment heater*.................. 138
Additional heater*.................................... 141
Audio system.......................................... 142
RSE - Rear Seat Entertainment system Dual Screen* .......................................... 155
Trip computer......................................... 160
DSTC – Stability and traction control system.......................................................... 162
Adapting driving characteristics............. 164
Cruise control*........................................ 165
Adaptive cruise control*.......................... 167
Distance Alert*........................................ 175
Collision Warning & Pedestrian Detection
with Auto Brake*..................................... 178
Driver Alert System – DAC*..................... 185
Driver Alert System - LDW*..................... 188
Park assist syst*...................................... 191
BLIS* – Blind Spot Information System. . 194
Comfort inside the passenger compartment........................................................ 198
Comfort inside the passenger compartment - Executive..................................... 202
HomeLinkŸ *............................................ 118
* Option/accessory, for more information, see Introduction.
5
Table of contents
05 06 07
05 During your journey
Recommendations during driving...........
Refuelling................................................
Fuel.........................................................
Loading...................................................
Cargo area .............................................
Driving with a trailer................................
Towing and recovery..............................
6
06 Wheels and tyres
214
217
218
222
224
225
231
General ...................................................
Changing wheels ...................................
Tyre pressure .........................................
Warning triangle and first-aid kit*............
Emergency puncture repair (TMK)* ........
* Option/accessory, for more information, see Introduction.
07 Maintenance and service
236
240
243
244
245
Engine compartment...............................
Lamps.....................................................
Wiper blades and washer fluid................
Battery.....................................................
Fuses......................................................
Car care..................................................
252
259
266
268
271
280
Table of contents
08 09
08 Specifications
Type designations...................................
Dimensions and weights.........................
Engine specifications..............................
Engine oil................................................
Fluids and lubricants...............................
Fuel.........................................................
Wheel and tyres, dimensions and pressure ........................................................
Electrical system.....................................
Type approval.........................................
Symbols in the display............................
09 Alphabetical Index
288
290
294
295
297
299
Alphabetical Index.................................. 308
300
302
303
304
7
Introduction
Important information
Reading the Owner's Manual
Introduction
A good way of getting to know your new car is
to read the owner's manual, ideally before your
first journey. This will give you the opportunity
to familiarise yourself with new functions, to
see how best to handle the car in different situations, and to make the best use of all the
car's features. Please pay attention to the
safety instructions contained in the manual.
The specifications, design features and illustrations in this owner's manual are not binding.
We reserve the right to make modifications
without prior notice.
©
In the event of uncertainty over what is standard or an option/accessory, contact a Volvo
dealer.
Special texts
WARNING
Warning texts advise of a risk of personal
injury.
IMPORTANT
Important texts advise of a risk of material
damage.
All types of option/accessory are marked with
an asterisk*.
In addition to standard equipment, this manual
also describes options (factory fitted equipment) and certain accessories (retrofitted extra
equipment).
The equipment described in the owner's manual is not available in all cars - they have different equipment depending on adaptations
for the needs of different markets and national
or local laws and regulations.
The car contains different types of decal which
are designed to convey important information
in a simple and clear manner. The decals in the
car have the following descending degree of
importance for the warning/information.
Warning for personal injury
NOTE texts give advice or tips that facilitate
the use of features and functions for example.
Footnote
There is footnote information in the owner's
manual that is located at the bottom of the
page. This information is an addition to the text
that it refers to via a number. If the footnote
refers to text in a table then letters are used
instead of numbers for referral.
Message texts
There are displays in the car that show text
messages. These text messages are high-
8
Decals
NOTE
Volvo Car Corporation
Option
lighted in the owner's manual by means of the
text being slightly larger and printed in grey.
Examples of this are in menu texts and message texts on the information display (e.g.
Audio settings).
* Option/accessory, for more information, see Introduction.
G031590
Black ISO symbols on yellow warning field,
white text/image on black message field. Used
to indicate the presence of danger which, if the
Introduction
Important information
warning is ignored, may result in serious personal injury or fatality.
Information
Procedure lists
Procedures where action must be taken in a
certain sequence are numbered in the owner's
manual.
Risk of property damage
When there is a series of illustrations for
step-by-step instructions each step is
numbered in the same way as the corresponding illustration.
G031592
G031593
There are numbered lists with letters adjacent to the series of illustrations where the
order of the instructions is not significant.
White ISO symbols and white text/image on
black or blue warning field and message field.
Used to indicate the presence of danger which,
if the warning is ignored, may result in damage
to property.
White ISO symbols and white text/image on
black message field.
NOTE
The labels shown in the owner's manual are
not provided as exact reproductions of
those in the car. The purpose is to show
their approximate appearance and location
in the car. The information that applies to
your car in particular is available on the label
in question in your car.
Arrows appear numbered and unnumbered and are used to illustrate a movement.
If there is no series of illustrations for step-bystep instructions then the different steps are
numbered with normal numbers.
Position lists
Red circles containing a number are used
in overview images where different components are pointed out. The number
recurs in the position list featured in connection with the illustration that describes
the item.
Bulleted lists
A bulleted list is used when there is a list of
points in the owner's manual.
Example:
9
Introduction
Important information
• Coolant
• Engine oil
To be continued
`` This symbol is located furthest down to the
right when a section continues on the following
page.
Recording data
The driving and safety systems in the car use
computers which check and share information
with each other on the car's function. One or
more of these computers may store information on the systems they check during normal
driving, during the course of a collision or nearcollision. Stored information may be used by:
•
•
•
•
10
Volvo Car Corporation
Service or repair workshops
Police or other authorities
Other parties who claim legal entitlement
for access to the information or someone
who has permission from the owner to
access the information.
Accessories and extra equipment
The incorrect connection and installation of
accessories can negatively affect the car's
electrical system. Certain accessories only
function when their associated software is
installed in the car's computer system. Volvo
therefore recommends that you always contact an authorised Volvo workshop before
installing accessories which are connected to
or affect the electrical system.
Information on the Internet
At www.volvocars.com there is further information concerning your car.
Introduction
Volvo and the environment
G000000
Volvo Cars' environmental philosophy
Environmental care is one of Volvo Car Corporation's core values which influence all operations. We also believe that our customers share
our consideration for the environment.
Your Volvo complies with strict international
environmental standards and is also manufactured in one of the cleanest and most resourceefficient plants in the world. Volvo Car Corporation has global ISO certification, which
includes the environmental standard ISO
14001 covering all factories and several of our
other units. We also set requirements for our
partners so that they work systematically with
environmental issues.
fuel consumption
Volvo cars have competitive fuel consumption
in each of their respective classes. Lower fuel
consumption generally results in lower emission of the greenhouse gas, carbon dioxide.
It is possible for the driver to influence fuel consumption. For more information read under the
heading, Reducing environmental impact.
Efficient emission control
Your Volvo is manufactured following the concept "Clean inside and out" – a concept that
encompasses a clean interior environment as
well as highly efficient emission control. In
many cases the exhaust emissions are well
below the applicable standards.
Clean air in the passenger compartment
A passenger compartment filter prevents dust
and pollen from entering the passenger compartment via the air intake.
A sophisticated air quality system, IAQS* (Interior Air Quality System) ensures that the incoming air is cleaner than the air in the traffic outside.
The system consists of an electronic sensor
and a carbon filter. The incoming air is monitored continuously and if there is an increase in
* Option/accessory, for more information, see Introduction.
11
Introduction
Volvo and the environment
the level of certain unhealthy gases such as
carbon monoxide then the air intake is closed.
Such a situation may arise in heavy traffic,
queues and tunnels for example.
The entry of nitrous oxides, ground-level ozone
and hydrocarbons is prevented by the carbon
filter.
Textile standard
The interior of a Volvo is designed to be pleasant and comfortable, even for people with
contact allergies and for asthma sufferers.
Extreme attention has been given to choosing
environmentally-compatible materials. This
means that they also fulfil the requirements in
the Oeko-Tex 100 standard1, a major advance
towards a healthier passenger compartment
environment.
Oeko-Tex certification covers seatbelts, carpets and fabrics for example. The leather in the
upholstery undergoes chromium-free tanning
and fulfils the certification requirements.
tem. Volvo makes clear demands regarding the
way in which our workshops are designed in
order to prevent spills and discharges into the
environment. Our workshop staff have the
knowledge and the tools required to guarantee
good environmental care.
• Always dispose of environmentally hazar-
Reducing environmental impact
Following this advice can save money, the
planet's resources are saved and the car's
durability is extended. For more information
and further advice, see page 214.
You can easily help reduce environmental
impact - here are a few tips:
• Avoid letting the engine idle - switch off the
engine when stationary for longer periods.
Pay attention to local regulations.
• Drive economically - think ahead.
• Perform service and maintenance in
accordance with the owner's manual's
instructions - follow the Service and Warranty Booklet's recommended intervals.
• If the car is equipped with an engine block
heater*, use it before starting from cold - it
improves starting capacity and reduces
wear in cold weather and the engine reaches normal operating temperature more
quickly, which lowers consumption and
reduces emissions.
Volvo workshops and the environment
Regular maintenance creates the conditions
for a long service life and low fuel consumption
for your car. In this way you contribute to a
cleaner environment. When Volvo's workshops
are entrusted with the service and maintenance of your car it becomes part of our sys1
12
• High speed increases consumption con-
More information on www.oekotex.com
* Option/accessory, for more information, see Introduction.
siderably due to increased wind resistance
- a doubling of speed increases wind resistance 4 times.
dous waste, such as batteries and oils, in
an environmentally safe manner. Consult a
workshop in the event of uncertainty about
how this type of waste should be discarded
- an authorised Volvo workshop is recommended.
Recycling
As a part of Volvo's environmental work, it is
important that the car is recycled in an environmentally sound manner. Almost all of the
car can be recycled. The last owner of the car
is therefore requested to contact a dealer for
referral to a certified/approved recycling
facility.
The owner's manual and the
environment
The FSC symbol shows that the paper pulp in
this publication comes from FSC certified forests or other controlled sources.
Introduction
Volvo and the environment
13
Seatbelts ................................................................................................
Airbags....................................................................................................
Activating/deactivating the airbag*.........................................................
Side airbags (SIPS bags) .......................................................................
Inflatable Curtain (IC) .............................................................................
WHIPS ....................................................................................................
When the systems deploy ......................................................................
Safety mode............................................................................................
Child safety.............................................................................................
14
* Option/accessory, for more information, see Introduction.
16
19
22
24
26
27
29
30
31
SAFETY
01 Safety
Seatbelts
01
General information
Releasing the seatbelt
Press the red button on the seatbelt buckle and
then let the belt retract. If the seatbelt does not
retract fully, feed it in by hand so that it does
not hang loose.
The seatbelt locks and cannot be withdrawn:
• if it is pulled out too quickly
• during braking and acceleration
• if the car leans heavily.
Make sure that you:
Heavy braking can have serious consequences
if the seatbelts are not used. Ensure that all
passengers use their seatbelts.
It is important that the seatbelt lies against the
body so it can provide maximum protection.
Do not lean the backrest too far back. The
seatbelt is designed to protect in a normal
seating position.
• do not use clips or anything else that can
prevent the seatbelt from fitting properly
• ensure that the seatbelt is not twisted or
caught on anything
• the hip strap must be positioned low down
(not over the abdomen)
• tension the hip strap over the lap by pulling
the diagonal shoulder belt up towards the
shoulder.
Putting on a seatbelt
Pull the belt out slowly and secure it by pressing its locking tab into the seatbelt buckle. A
loud "click" indicates that the belt has locked.
The buckles only fit the intended lock in the rear
seat1.
1
16
Certain markets.
WARNING
The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this
may diminish the protection provided by the
airbag in the event of a collision.
WARNING
Each seatbelt is designed for only one person.
WARNING
Never modify or repair the seatbelts yourself. Volvo recommends that you contact an
authorised Volvo workshop.
If a seatbelt has been subjected to a major
load, such as in conjunction with a collision,
the entire seatbelt must be replaced. Some
of the protective characteristics of the seatbelt may have been lost, even if it appears
to be undamaged. In addition, replace the
seatbelt if the belt is worn or damaged. The
new seatbelt must be type-approved and
intended for installation in the same position
as the replaced seatbelt.
01 Safety
Seatbelts
Seatbelts and pregnancy
and steering wheel). The aim should be to position the seat with as large a distance as possible between abdomen and steering wheel.
The seatbelt reminder in the rear seat has two
subfunctions:
are being used in the rear seat. A message
appears in the information display when
the seatbelts are in use, or if one of the rear
doors has been opened. The message is
cleared automatically after driving for
approximately 30 seconds or after pressing the indicator stalk's READ button.
G020998
The lap section should lay flat over the thighs
and as low as possible under the abdomen. –
It must never be allowed to ride upward.
Remove the slack from the seatbelt and ensure
that it fits as close to the body as possible. In
addition, check that there are no twists in the
seatbelt.
Rear seat
• Provides information on which seatbelts
Seatbelt reminder
• Provides a warning if one of the rear seat-
G017726
The seatbelt should always be worn during
pregnancy. But it is then crucial that it be worn
in the correct way. The diagonal section should
wrap over the shoulder then be routed between
the breasts and to the side of the abdomen.
01
Unbelted occupants will be reminded to fasten
their seatbelts by means of an audio and visual
reminder. The audio reminder is speed
dependent, and in some cases time dependent. The visual reminder is located in the roof
console and the combined instrument panel.
belts is unfastened during travel. This
warning takes the form of a message on
the information display along with the
audio/visual signal. The warning stops
when the seatbelt is re-fastened, or it can
also be acknowledged manually by pressing the READ button.
The message on the information display showing which seatbelts are in use is always available. Press the READ button to see stored
messages.
Child seats are not covered by the seatbelt
reminder system.
As the pregnancy progresses, pregnant drivers
should adjust their seats and steering wheel
such that they can easily maintain control of the
vehicle as they drive (which means that they
must be able to easily operate the foot pedals
``
17
01 Safety
01
Seatbelts
Certain markets
An acoustic signal and indicator lamp remind
the driver and front seat passenger to use a
seatbelt if either of them is not wearing one. At
low speed, the audio reminder will sound for
the first 6 seconds.
Seatbelt tensioner
All the seatbelts are equipped with belt tensioners. A mechanism in the seatbelt tensioner
tightens the seatbelt in the event of a sufficiently violent collision. The seatbelt then provides more effective restraint for the occupants.
WARNING
Never insert the tongue of the passenger's
seatbelt into the buckle on the driver's side.
Always insert the tongue of the seatbelt into
the buckle on the correct side. Do not make
any damages on seatbelts nor insert any
foreign objects into a buckle. The seatbelts
and buckles would then possibly not function as intended in the event of a collision.
There is a risk of serous injury.
18
01 Safety
Airbags
Warning symbol on the combined
instrument panel
01
As well as the warning symbol, a message may
appear on the information display in appropriate cases. If the warning symbol malfunctions,
the warning triangle illuminates and SRS
Airbag Service required or SRS Airbag
Service urgent appears in the display. Volvo
recommends that you contact an authorised
Volvo workshop immediately.
G018666
Airbag system
Airbag system, right-hand drive car.
G018665
The warning symbol in the combined instrument panel illuminates when the remote control key is in key position II or III. The symbol
clears after approx. 6 seconds provided the
airbag system is fault-free.
WARNING
If the warning symbol for the airbag system
remains illuminated or illuminates while driving, it means that the airbag system does
not have full functionality. The symbol indicates a fault in the seatbelt tensioner system, SIPS, the IC system or some other fault
in the system. Volvo recommends that you
contact an authorised Volvo workshop
immediately.
The system consists of airbags and sensors. A
sufficiently violent collision trips the sensors
and the airbag(s) are inflated with hot gas. To
cushion the impact, the airbag deflates when
compressed. When this occurs, smoke
escapes into the car. This is completely normal. The entire process, including inflation and
deflation of the airbag, occurs within tenths of
a second.
Airbag system, left-hand drive car.
WARNING
Volvo recommends that you contact an
authorised Volvo workshop for repair.
Defective work in the airbag system could
cause malfunction and result in serious personal injury.
``
19
01 Safety
01
Airbags
Passenger airbag
NOTE
The car has an airbag to supplement the protection afforded by the seatbelt on the passenger side. It is folded up into a compartment
above the glovebox. Its cover panel is marked
AIRBAG.
The sensors react differently depending on
the course of the collision and whether or
not the seatbelts on the driver and passenger side are used.
It is therefore possible that only one (or
none) of the airbags may inflate in a collision. The airbag system senses the force of
the collision on the car and adapts accordingly so that one or more airbags are
deployed.
The capacity of the airbags is also adapted
to the collision force to which the vehicle is
subjected.
WARNING
Location of the front passenger airbag in a righthand drive car.
Airbag on the driver's side
The car has an airbag to supplement the protection afforded by the seatbelt on the driver's
side. It is folded up into the centre of the steering wheel. The steering wheel is marked
AIRBAG.
WARNING
The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this
may diminish the protection provided by the
airbag in the event of a collision.
Location of the front passenger airbag in a lefthand drive car.
20
To minimise the risk of injury if the airbag
deploys, passengers must sit as upright as
possible with their feet on the floor and
backs against the backrest. Seatbelts must
be secured.
WARNING
Do not put objects in front of or above the
dashboard where the passenger airbag is
located.
01 Safety
Airbags
01
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag
is activated.
Never allow anybody to stand or sit in front
of the front passenger seat.
No one shorter than 140 cm should ever sit
in the front passenger seat if the airbag is
activated.
Failure to follow the advice given above can
endanger life.
21
01 Safety
01
Activating/deactivating the airbag*
Key switch off - PACOS*
General information
The airbag for the front passenger seat can be
deactivated if the car is equipped with a switch,
PACOS (Passenger Airbag Cut Off Switch). For
information on how to activate/deactivate, see
under the heading Activating/deactivating.
Key switch off/switch
The switch for the passenger airbag (PACOS)
is located on the passenger end of the instrument panel and is accessible when the passenger door is open (see under the heading
below, Activating/deactivating).
Check that the switch is in the required position. Volvo recommends that the remote control key's key blade be used to change position.
For information on the key blade, see
page 43.
WARNING
Failure to follow the advice given above
could endanger the life of passengers in the
car.
22
WARNING
Activating/deactivating
If the car is equipped with a front passenger
airbag, but does not have a PACOS switch
(Passenger Airbag Cut Off Switch), then the
airbag will always be activated.
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag
is activated and the symbol
in the roof
console is illuminated. Failure to follow this
advice could endanger the life of the child.
Switch location
WARNING
Do not allow anyone to sit in the front passenger seat if the message in the roof panel
(see page 23) indicates that the airbag is
deactivated and if the warning symbol for
the airbag system is also displayed in the
combined instrument panel. This indicates
that there has been a severe malfunction.
Visit a workshop as soon as possible. Volvo
recommends that you contact an authorised Volvo workshop.
* Option/accessory, for more information, see Introduction.
The airbag is activated. With the switch in
this position, persons taller than 140 cm
can sit in the front passenger seat, but
never children in a child seat or on a
booster cushion.
The airbag is deactivated. With the switch
in this position, children in a child seat or
on a booster cushion can sit in the front
passenger seat, but never persons taller
than 140 cm.
01 Safety
Activating/deactivating the airbag*
A text message and a symbol in the roof panel
indicate that the airbag for the front passenger
seat is deactivated (see preceding illustration).
WARNING
Activated airbag (passenger seat):
Never place a child in a child seat or on a
booster cushion on the front passenger seat
when the airbag is activated. This applies to
everyone shorter than 140 cm.
01
NOTE
When the remote control key is turned to
key position II or III the warning symbol for
the airbag is displayed on the combined
instrument panel for approx. 6 seconds (see
page 19).
Following which, the indicator in the roof
console is illuminated showing the correct
status for the front passenger seat airbag.
For more information about the different key
positions for the remote control key, see
page 69.
Deactivated airbag (passenger seat):
No one taller than 140 cm should ever sit in
the front passenger seat when the airbag is
deactivated.
G017800
Failure to follow the advice given above
could endanger life.
Messages
Indicator showing that the passenger airbag is
activated.
A warning symbol in the roof panel indicates
that the airbag for the front passenger seat is
activated (see preceding illustration).
2
G017724
2
Indicator showing that the passenger airbag is
deactivated.
* Option/accessory, for more information, see Introduction.
23
01 Safety
Side airbags (SIPS bags)
G032949
WARNING
In a side impact collision a large proportion of
the collision force is transferred by the SIPS
(Side Impact Protection System) to beams, pillars, the floor, the roof and other structural
parts of the body. The side airbags at the driver's and front passenger seats protect the
chest area and the hip and are an important
part of the SIPS.
The SIPS bag system consists of two main
components, side airbag and sensors. The
side airbags are located in the front seat backrests.
•
Volvo recommends that repairs are only
carried out by an authorised Volvo
workshop. Defective work in the SIPSbag system could cause malfunction
and result in serious personal injury.
•
Do not put objects in the area between
the outside of the seat and the door
panel, since this area is required by the
side airbag.
•
Volvo recommends the use only of car
seat covers approved by Volvo. Other
seat covers may impede the operation
of the side airbags.
•
Location
G024377
Side airbag
Driver's seat, left-hand drive.
The side airbag is a supplement to the
seatbelts. Always use a seatbelt.
Child seats and side airbags
The protection provided by the car to children
seated in a child seat or on a booster cushion
is not diminished by the side airbag.
A child seat or booster cushion can be placed
on the front passenger seat provided that the
car does not have an activated1 passenger airbag.
G024378
01
Front passenger seat, left-hand drive.
The SIPS bag system consists of side airbags
and sensors. A sufficiently violent collision trips
1
24
For information on activating/deactivating the airbag, see page 22.
01 Safety
Side airbags (SIPS bags)
01
the sensors and the side airbags are inflated.
The airbag inflates between the occupant and
the door panel and thereby cushions the initial
impact. The airbag deflates when compressed
by the collision. The side airbag is normally only
deployed on the side of the collision.
25
01 Safety
01
Inflatable Curtain (IC)
Properties
WARNING
Never hang or attach heavy items onto the
handles in the roof. The hook is only
designed for light clothing (not for solid
objects such as umbrellas for example).
Do not screw or install anything onto the
car's headlining, door pillars or side panels.
This could compromise the intended protection. Volvo recommends that you only
ever use Volvo genuine parts that are
approved for placement in these areas.
WARNING
The inflatable curtain IC (Inflatable Curtain) is a
part of SIPS and the airbags. It is fitted in the
headlining along both sides of the roof and
protects the car's occupants sitting in the outer
seats. A sufficiently violent collision trips the
sensors and the inflatable curtain is inflated.
The inflatable curtain helps to prevent the
driver and passengers from striking their heads
on the inside of the car during a collision.
Do not load the car higher than 50 mm under
the top edge of the door windows. Otherwise, the intended protection of the inflatable curtain, which is concealed in the headlining, may be compromised.
WARNING
The inflatable curtain is a supplement to the
seatbelts.
Always use a seatbelt.
26
01 Safety
WHIPS
Protection against whiplash injury –
WHIPS
The whiplash protection system (WHIPS) consists of energy absorbing backrests and specially designed head restraints in the front
seats. The system is actuated by a rear-end
collision, where the angle and speed of the collision, and the nature of the colliding vehicle all
have an influence.
01
Correct seating position
For the best possible protection, the driver and
front seat passenger should sit in the centre of
the seat with as little space as possible
between the head and the head restraint.
Do not obstruct the WHIPS system
WARNING
The WHIPS system is a supplement to the
seatbelts. Always use a seatbelt.
Properties of the seat
When the WHIPS system is deployed, the front
seat backrests are lowered backward to alter
the seating position of the driver and front seat
passenger. This reduces the risk of whiplash
injury.
WARNING
Never modify or repair the seat or WHIPS
system yourself. Volvo recommends that
you contact an authorised Volvo workshop.
WHIPS system and child seats/booster
cushions
Do not leave any objects on the floor behind the
driver's seat/passenger seat that may prevent the
WHIPS system from functioning.
WARNING
Do not squeeze rigid objects between the
rear seat cushion and the front seat backrest. Make sure you do not to obstruct the
function of the WHIPS system.
The protection provided by the car to children
seated in a child seat or on a booster cushion
is not diminished by the WHIPS system.
``
27
01 Safety
01
WHIPS
WARNING
If a seat has been subjected to extreme
forces, such as due to a rear-end collision,
the WHIPS system must be checked. Volvo
recommends that it is checked by an
authorised Volvo workshop.
Part of the WHIPS system's protective
capacity may have been lost even if the
seats appear to be undamaged.
Do not place objects on the rear seat that may
prevent the WHIPS system from functioning.
WARNING
If a rear seat backrest is folded down, the
corresponding front seat must be moved
forward so that it does not touch the folded
backrest.
28
Volvo recommends that you contact an
authorised Volvo workshop to have the system checked even after a minor rear-end
collision.
01 Safety
When the systems deploy
When the systems deploy
System
Triggered
Seatbelt tensioner,
front seat
In a frontal collision
and/or side-impact
accident and/or
rear-end collision
Seatbelt tensioner,
rear seat
A
In a frontal collision
Airbags (SRS)
In a frontal collisionA
Side airbags (SIPS)
In a side-impact
accidentA
Inflatable Curtain IC
In a side-impact
accidentA
Whiplash protection
WHIPS
In a rear-end collision
The bodywork of the car could be greatly deformed in a collision without airbag deployment. A number of factors such
as the rigidity and weight of the object hit, the speed of the
car, the angle of the collision etc. affects how the different
safety systems of the car are activated.
Volvo workshop. Do not drive with
deployed airbags.
• Volvo recommends that you engage an
authorised Volvo workshop to handle the
replacement of components in the car's
safety systems.
• Always contact a doctor.
NOTE
01
WARNING
Never drive with deployed airbags. They
can make steering difficult. Other safety
systems may also be damaged. The smoke
and dust created when the airbags are
deployed can cause skin and eye irritation/
injury after intensive exposure. In case of
irritation, wash with cold water. The rapid
deployment sequence and airbag fabric
may cause friction and skin burns.
The SRS, SIPS, IC and belt tensioner systems are deployed only once during a collision.
WARNING
The airbag control module is located in the
centre console. If the centre console is
drenched with water or other liquid, disconnect the battery cables. Do not attempt to
start the car since the airbags may deploy.
Recovering the car. Volvo recommends that
you have it conveyed to an authorised Volvo
workshop.
If the airbags have deployed, the following is
recommended:
• Recovering the car. Volvo recommends
that you have it conveyed to an authorised
29
01 Safety
01
Safety mode
Driving after a collision
effect that the ignition is on, press the start
button. Then close the door and reinsert the
remote control key. The car's electronics will
now try to reset themselves to normal mode.
Then try to start the car.
If the message Safety mode See manual is
still shown on the display then the car must not
be driven or towed, but a vehicle recovery service used instead. Even if the car appears to be
driveable, hidden damage may make the car
impossible to control once moving.
If the car is involved in a collision, the text
Safety mode See manual may appear on the
information display. This means that the car
has reduced functionality. Safety mode is a
protective state that is enforced when the collision may have damaged any of the car's vital
functions, such as the fuel lines, sensors for
one of the safety systems, or the brake system.
Attempting to start the car
First, check that no fuel is leaking from the car.
There must be no smell of fuel either.
If everything seems normal and you have
checked for indications of fuel leakage, you
may attempt to start the car.
Remove the remote control key and open the
driver's door. If a message is now shown to the
30
Moving the car
If Normal mode is shown after Safety mode
See manual has been reset, the car can be
moved carefully out of a dangerous position.
Do not move the car further than necessary.
WARNING
Never attempt to repair your car or reset the
electronics yourself if the car has been in
safety mode. This could result in personal
injury or the car not functioning as normal.
Volvo recommends that you engage an
authorised Volvo workshop to check and
restore the car to normal status after Safety
mode See manual has been displayed.
WARNING
Never, under any circumstances, attempt to
restart the car if it smells of fuel when the
Safety mode message is displayed. Leave
the car at once.
WARNING
If the car is in safety mode it must not be
towed. It must be transported from its location. Volvo recommends that it is transported to an authorised Volvo workshop.
01 Safety
Child safety
Children should sit comfortably and
safely
Volvo recommends that children travel in rearfacing child seats until as late an age as possible, at least until 3-4 years of age, and then
front-facing booster cushions/child seats until
up to 10 years of age.
beams under the seat. Sharp edges can damage the straps.
NOTE
In the event of questions when fitting child
safety products, contact the manufacturer
for clearer instructions.
Look in the installation instructions for the child
seat for the correct fitting.
Location of child seats
Child seats
You may place:
The position of a child in the car and the choice
of equipment are dictated by the child's weight
and size, for more information, see page 33.
• a child seat/booster cushion on the passenger seat, provided the passenger airbag is not activated1.
• one or more child seats/booster cushions
NOTE
in the rear seat.
Volvo has child safety equipment (child seats,
booster cushions & attachment devices) which
is designed for your particular car. Using Volvo's child safety equipment provides you with
optimum conditions for your child to travel
safely in the car. Furthermore, the child safety
equipment fits and is easy to use.
1
G020739
Regulations regarding the placement of
children in cars vary from country to country. Check what does apply.
Children of all ages and sizes must always sit
correctly secured in the car. Never allow a child
to sit on the knee of a passenger.
01
Always fit child seats/booster cushions in the
rear seat if the passenger airbag is activated. If
a child is sitting on the front passenger seat
then he/she could suffer serious injury if the
airbag deploys.
Child seats and airbags are not compatible.
NOTE
When using child safety products it is
important to read the installation instructions included.
Do not attach the straps for the child seat to
the horizontal adjustment bar, springs, rails or
For information on activated/deactivated airbag, see page 22.
``
31
01 Safety
01
Child safety
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag
(SRS) is activated.
No one shorter than 140 cm should ever sit
in the front passenger seat if the airbag
(SRS) is activated.
Failure to follow the advice given above can
endanger life.
32
WARNING
Label Airbag
Booster cushions/child seats with steel
braces or some other design that could rest
on the seatbelt buckle's opening button
must not be used, as they could cause the
seatbelt buckle to open accidentally.
Do not allow the upper section of the child
seat to rest against the windscreen.
Label fitted on the end face of the instrument panel
on the passenger side, see the illustration on page
22.
01 Safety
Child safety
01
Recommended child seats2
Weight
Front seat (with deactivated airbag)
Outer rear seat
Group 0
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
ISOFIX fixture system.
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
ISOFIX fixture system.
Type approval: E5 04301146.
Type approval: E5 04301146.
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
car's seatbelt.
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
car's seatbelt.
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
car's seatbelt.
Type approval: E1 04301146
Type approval: E1 04301146
Type approval: E1 03301146
Rear-facing child seat (Child Seat) rear-facing child seat, secured with the
car's seatbelt and straps. Use a protective cushion between the child seat
and the dashboard.
Rear-facing child seat (Child Seat) rear-facing child seat, secured with the
car's seatbelt and straps.
Rear-facing child seat (Child Seat) rear-facing child seat, secured with the
car's seatbelt and straps.
Type approval: E5 03135.
Type approval: E5 03135.
Child seats which are universally
approved.
Child seats which are universally
approved.
max 10 kg
Group 0+
Centre rear seat
max 13 kg
Type approval: E5 03135.
Child seats which are universally
approved.
2
With regard to other child seats your car should be included in the manufacturer's enclosed list of vehicles or be universally approved in accordance with the ECE R44 legal requirement.
``
33
01 Safety
01
Child safety
Weight
Front seat (with deactivated airbag)
Outer rear seat
Group 1
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps.
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps.
Type approval: E5 04192.
Type approval: E5 04192.
Rear-facing child seat (Child Seat) rear-facing child seat, secured with the
car's seatbelt and straps. Use a protective cushion between the child seat
and the dashboard.
Rear-facing child seat (Child Seat) rear-facing child seat, secured with the
car's seatbelt and straps. Use a protective cushion between the child seat
and the dashboard.
Rear-facing child seat (Child Seat) rear-facing child seat, secured with the
car's seatbelt and straps. Use a protective cushion between the child seat
and the dashboard.
Type approval: E5 03135.
Type approval: E5 03135.
Type approval: E5 03135.
Britax Fixway – rear-facing child seat,
secured with the ISOFIX fixture system
and straps.
Britax Fixway – rear-facing child seat,
secured with the ISOFIX fixture system
and straps.
Type approval: E5 03171
Type approval: E5 03171
Child seats which are universally
approved.
Child seats which are universally
approved.
9-18 kg
34
Centre rear seat
Child seats which are universally
approved.
01 Safety
Child safety
Weight
Front seat (with deactivated airbag)
Outer rear seat
Centre rear seat
Group 2
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps
Type approval: E5 04192
Type approval: E5 04192
Type approval: E5 04192
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - frontfacing child seat, secured with the
car's seatbelt.
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - frontfacing child seat, secured with the
car's seatbelt.
Type approval: E5 04191
Type approval: E5 04191
Volvo booster seat with backrest
(Volvo Booster Seat with backrest).
Volvo booster seat with backrest
(Volvo Booster Seat with backrest).
Volvo booster seat with backrest
(Volvo Booster Seat with backrest).
Type approval: E1 04301169
Type approval: E1 04301169
Type approval: E1 04301169
Booster cushion with and without
backrest (Booster Cushion with and
without backrest).
Booster cushion with and without
backrest (Booster Cushion with and
without backrest).
Booster cushion with and without
backrest (Booster Cushion with and
without backrest).
Type approval: E5 03139
Type approval: E5 03139
Type approval: E5 03139
15-25 kg
Group 2/3
15-36 kg
01
``
35
01 Safety
01
Child safety
Child safety locks, rear doors
The controls for operating the rear door power
windows and the rear door opening handles
can be blocked from opening from the inside.
For more information, see page 55.
ISOFIX fixture system for child seats
NOTE
The ISOFIX fixture system is an accessory
for the passenger seat.
Always follow the manufacturer's installation
instructions when connecting a child seat to
the ISOFIX mounting points.
Upper mounting points for child seats
For cars with folding head restraints on the
outside seats the head restraints should be
folded to facilitate installation.
The upper mounting points are primarily
intended for use with front-facing child seats.
Volvo recommends that small children should
sit in rear-facing child seats for as long as possible.
For detailed information on how the child seat
should be tensioned in the upper mounting
points, see the seat manufacturer's instructions.
WARNING
The child seat's straps must always be
drawn through the hole in the head restraint
leg before they are tensioned at the attachment point.
Mounting points for the ISOFIX fixture system
are concealed behind the lower section of the
rear seat backrest, in the outer seats.
The location of the mounting points is indicated
by symbols in the backrest upholstery (see preceding illustration).
Press the seat cushion down to access the
mounting points.
36
The car is equipped with upper mounting
points for child seats. These mounting points
are located on the parcel shelf and are concealed by plastic covers. Bend aside the plastic covers to access each respective mounting
point.
01 Safety
01
37
Remote control key/key blade................................................................
Privacy locking*.......................................................................................
Battery replacement, remote control key/PCC*......................................
Keyless drive*..........................................................................................
Locking/unlocking...................................................................................
Child safety locks....................................................................................
Alarm*......................................................................................................
38
* Option/accessory, for more information, see Introduction.
40
45
46
48
51
55
56
LOCKS AND ALARM
02 Locks and alarm
Remote control key/key blade
General
02
The car is supplied with 2 remote control keys
or PCCs (Personal Car Communicator). They
are used to start the car and for locking and
unlocking.
More remote control keys can be ordered – up
to 6 can be programmed and used for the same
car.
The PCC has increased functionality compared with the remote control key. The continuation of this chapter describes the functions
available in both the PCC and the remote control key.
WARNING
If there are children in the car:
Always remember to switch off the power
supply to power windows and sunroof by
removing the remote control key if the driver
leaves the car.
The current number of keys registered to the
car can be checked under Car settings Car
Key memory Number of keys. For a
description of the menu system, see
page 124.
Key memory1 – door mirrors and driver's
seat
The settings are automatically connected to
each respective remote control key, see pages
72 and 91.
The function can be activated/deactivated
under Car settings Car Key memory
Seat & mirror positions.
For a description of the menu system, see
page 124.
For cars with Keyless drive system, see
page 48.
Loss of a remote control key
Indicator for locking/unlocking
If you lose a remote control key then new ones
can be ordered at a workshop - an authorised
Volvo workshop is recommended. The remaining remote control keys must then be taken to
the workshop. The code of the missing remote
When the car is locked or unlocked using the
remote control key, the direction indicators
confirm that locking/unlocking was correctly
performed.
1
40
control key must be erased from the system as
a theft prevention measure.
Only in combination with power driver's seat and power mirrors.
• Locking - one flash.
• Unlocking - two flashes.
After locking the indication is only given if all
locks have been activated once the doors have
been closed.
Selecting the function
The function can be activated/deactivated
under Car settings Light settings Lock
confirmation light and Car settings Light
settings Unlock confirmation light.
For a description of the menu system, see
page 124.
Immobiliser
Each remote control key has a unique code.
The car can only be driven with the correct
remote control key with the correct code.
The following error messages in the combined
instrument panel's information display are related to the electronic immobiliser:
02 Locks and alarm
Remote control key/key blade
Key error Try again
Error reading the
remote control key
during starting Remove the key, reinsert it and try to
start again.
Car key not found
Error reading the
PCC during starting
- Try to start again.
(Only applies to Keyless drive with PCC.)
If the error persists:
Insert the remote
key into the ignition
switch and try to
start again.
Immobiliser Try
start again
Error in immobiliser
system during starting. If the fault persists the recommendation is to contact
an authorised Volvo
workshop.
For starting the car, see page 101.
Functions
02
Remote control key.
G021079
Specification
G021078
Message
PCC* - Personal Car Communicator.
Information
Locking
Function buttons
Unlocking
Approach light duration
Boot lid
Locking – Locks the doors and boot lid
while the alarm is activated.
Press and hold (at least 2 seconds) to close all
the windows and sunroof* simultaneously.
Panic function
WARNING
If the sunroof and windows are closed using
the remote control key, check that no one is
in danger of getting hands caught.
Unlocking – Unlocks the doors and boot
lid while the alarm is deactivated.
``
* Option/accessory, for more information, see Introduction.
41
02 Locks and alarm
Remote control key/key blade
Press and hold (at least 4 seconds) to open all
windows simultaneously.
02
The function can be changed from unlocking
all doors simultaneously, to unlocking the driver's door only with one press of the button and,
after a further press of the button - within 10
seconds - unlocking the remaining doors.
The function can be changed in the menu system under Car settings Lock settings
Doors unlock with both the alternatives All
doors and Driver door, then all. For a
description of the menu system, see
page 124.
Approach light duration – Used to switch
on the car's lighting at a distance. For more
information, see page 83.
Using the information button enables access to
certain information from the car via the indicator lamps.
Range
The remote key's functions have a range of
about 20 m from the car.
If the car does not verify a button being pressed
- move closer and try again.
NOTE
The remote control key functions can be
disrupted by surrounding radio waves,
buildings, topographical conditions etc. The
car can always be locked/unlocked using
the key blade, see page 43.
Unique functions PCC*
Press the information button
.
> All indicator lamps flash for approximately 7 seconds and the light travels
around on the PCC. This indicates that
information from the car has been read.
If any of the other buttons are pressed
during this time then the reading is interrupted.
If none of the indicator lamps illuminates with repeated use of the information
button and in different locations (as well as
after 7 seconds and after the light has travelled around on the PCC), contact a workshop - an authorised Volvo workshop is recommended.
Panic function – Used to attract attention
in an emergency.
G021080
Press and hold the button for at least 3 seconds or press it twice within 3 seconds to activate the direction indicators and the horn.
42
NOTE
Boot lid – Unlocks and disarms the alarm
for the boot lid only. For more information, see
page 52.
The function can be turned off with the same
button once it has been active for at least
5 seconds. Otherwise the function switches off
automatically after 2 minutes and 45 seconds.
Using the information button
PCC* - Personal Car Communicator.
* Option/accessory, for more information, see Introduction.
Information button
Indicator lamps
Indicator lamps display information in accordance with the following illustration:
02 Locks and alarm
Remote control key/key blade
Detachable key blade
NOTE
The information button functions can be
disrupted by surrounding radio waves,
buildings, topographical conditions etc.
A remote control key contains a detachable
key blade of metal with which some functions
can be activated and some operations carried
out.
Out of PCC range
If the PCC is too far away from the car for the
information to be read then the status the car
was last left in is shown, without the light travelling around on the PCC.
Green continuous light – the car is locked.
Yellow continuous light – the car is
unlocked.
Red continuous light – the alarm has been
triggered since the car was locked.
Red light flashing alternately in both indicator lamps – The alarm was triggered less
than 5 minutes ago.
Range PCC
The PCC's range for locking, unlocking and
boot lid is about 20 m from the car, for other
functions up to about 100 m.
If the car does not verify a button being pressed
- move closer and try again.
If several PCCs are used for the car then it is
only the PCC last used for locking/unlocking
that shows correct status.
02
The key blade's unique code is provided by
authorised Volvo workshops, which are recommended when ordering new key blades.
Key blade functions
Using the remote control key's detachable key
blade:
• the driver's door can be opened manually
if central locking cannot be activated with
the remote control key, see page 49.
NOTE
If no indicator lamps illuminate when
the information button is used within range
then this may be because the last communication between the PCC and the car was
disrupted by surrounding radio waves,
buildings, topographical conditions etc.
• the rear doors' mechanical child safety
locks can be activated/deactivated, see
page 55.
• access to the glovebox and cargo area
(privacy locking*) is blocked, see
page 45.
• the boot lid can be opened manually if the
car is de-energised, see page 53.
• the airbag for front passenger seat
(PACOS)* can be activated/deactivated,
see page 22.
``
* Option/accessory, for more information, see Introduction.
43
02 Locks and alarm
Remote control key/key blade
Unlocking doors with the key blade
Removing the key blade
If central locking cannot be activated with the
remote control key - e.g. if the batteries are
discharged - then the driver's door can be
opened as follows:
02
1. Unlock the driver's door with the key blade
in the door handle's lock cylinder.
G021082
NOTE
When the door has been unlocked using the
key blade and is opened, the alarm is triggered.
Slide the spring-loaded catch to the side.
At the same time pull the key blade straight
out backwards.
Attaching the key blade
Carefully refit the key blade into its location in
the remote control key.
1. Hold the remote control key with the slot
pointed up and lower the key blade into its
slot.
2. Lightly press the key blade. You should
hear a "click" when the key blade is locked
in.
44
2. Deactivate the alarm by inserting the
remote control key in the ignition switch.
For a car with the Keyless system, see
page 49.
02 Locks and alarm
Privacy locking*
General information on privacy locking
locked and the boot lid lock is disconnected
from the central locking - the boot lid cannot
be opened with either the central locking button in the front doors or the remote control key.
G021083
This means that the remote control key without
key blade can only be used to activate/deactivate the alarm, to open the doors and to drive
the car.
Active locks for remote control key with key blade.
The remote control key without key blade can
then be handed over to the service or hotel staff
- the loose key blade is retained by the car
owner.
Activating/deactivating
Turn the key blade 180 degrees clockwise.
The keyhole is vertical in the locked position for privacy locking.
02
Pull out the key blade. The information display shows a message at the same time.
The glovebox is then locked and the boot lid
can no longer be unlocked with the remote
control key or the central locking button.
NOTE
Do not reinsert the key blade into the remote
control key but keep it in a safe place
instead.
• Deactivation takes place in reverse order.
G021084
G020508
For information on locking the glovebox only,
see page 52.
Active locks for remote control key, without key
blade and privacy locking activated.
The privacy locking function is intended for
when the car is left for service, with a hotel
parking valet or similar. The glovebox is then
Activating privacy locking.
To activate privacy locking:
Insert the key blade in the glovebox lock
cylinder.
* Option/accessory, for more information, see Introduction.
45
02 Locks and alarm
Battery replacement, remote control key/PCC*
Replacing the battery
02
Battery replacement
Closely study how the battery/batteries are
secured on the inside of the cover, with
regard to their (+) and (–) sides.
The batteries should be replaced if:
• the information symbol is illuminated and
the display shows Replace car key
battery
Remove control key (1 battery)
and/or
1. Carefully prize out the battery.
• the locks repeatedly do not react to signals
2. Install a new one with the (+) side down.
from the remote control key within
20 metres from the car.
PCC* (2 batteries)
Opening
Slide the spring-loaded catch to the
side.
At the same time pull the key blade
straight out backwards.
Insert a 3 mm slot screwdriver in the
hole behind the spring-loaded catch and
gently prize the remote control key up.
NOTE
Turn the remote control key over with the
buttons facing up, this is to avoid the batteries falling out when it is opened.
IMPORTANT
Avoid touching the battery and its terminals
with your fingers, as this could damage their
functionality.
46
* Option/accessory, for more information, see Introduction.
1. Carefully prize out the batteries.
2. First install one new one with the (+) side
up.
3. Position the white plastic tab in between
and finally install a second new battery with
the (+) side down.
Battery type
Use batteries with the designation CR2430, 3V
- one in the remote control key and two in the
PCC.
Assembly
1. Press the remote control key together.
2. Hold the remote control key with the slot
pointed up and lower the key blade into its
slot.
3. Lightly press the key blade. You should
hear a "click" when the key blade is locked
in.
02 Locks and alarm
Battery replacement, remote control key/PCC*
IMPORTANT
Make sure that you dispose of old batteries
in an environmentally-friendly way.
02
* Option/accessory, for more information, see Introduction.
47
02 Locks and alarm
Keyless drive*
02
Keyless lock and ignition system (only
PCC1)
General
the car door handle or boot lid. This means that
the person who wishes to lock or unlock a door
must have the PCC with him or her. It is not
possible to lock or unlock a door if the PCC is
on the opposite side of the car.
G020577
The red rings in the preceding illustration indicate the range covered by the system's antennas.
The keyless drive function in the PCC allows
the car to be unlocked, driven and locked without the need for a key. You simply have to have
the PCC with you. The system makes it easier
and more convenient to open the car, e.g.
when your hands are full.
Both of the car's PCCs incorporate the Keyless
function. Additional PCCs can be ordered, see
page 40.
PCC range
In order to open a door or the boot lid, a PCC
must be no more than approx. 1.5 metres from
1
48
If all PCCs are removed from the car when the
engine is running or key position II is active
(see page 69) and if all doors are closed, then
a warning message is shown in the information
display and an audio reminder signal sounds at
the same time.
The warning message clears and the audio
reminder signal stops when the PCC is brought
back to the car after:
• a door has been opened and closed
• the PCC is inserted into the ignition switch
• the READ button has been pressed.
Handling the PCC safely
If a PCC with keyless drive function is left in the
car, it is deactivated temporarily when the car
is locked. This prevents unauthorised entry.
However, if someone breaks into the car,
opens the door and finds the PCC, it can be
Personal Car Communicator, see page 42.
* Option/accessory, for more information, see Introduction.
reactivated. It is therefore important to handle
all PCCs with great care.
IMPORTANT
Never leave a PCC behind in the car.
Interference to PCC function
Electromagnetic fields and screening can interfere with the keyless drive system. For this reason, do not place the PCC near mobile phones
or metallic objects.
If interference is experienced nonetheless, use
the PCC and the key blade as a remote control
key, see page 41.
02 Locks and alarm
Keyless drive*
Locking
Unlocking
Unlocking takes place when a hand grasps a
door handle or the boot lid's rubberised pressure plate is actuated - open the door or boot
lid as normal.
Unlocking with the key blade
2. Insert the key blade in the lock cylinder and
unlock the door.
3. Refit the plastic cover after unlocking.
02
NOTE
When the driver's door is unlocked using the
key blade and is opened, the alarm is triggered. It is switched off by inserting the PCC
in the ignition switch, see page 57.
Key memory2 – driver's seat and door
mirrors
Cars with the keyless system have a button on the
outside door handles.
PCC memory function
If several people each with a PCC approach the
car, then the settings for seat and mirrors are
implemented for the person who opens the
driver's door.
Lock the doors and the boot lid by pressing the
lock button on one of the door handles on the
outside.
All doors and the boot lid must be closed
before the car can be locked - otherwise the
car is not locked.
NOTE
On cars with automatic transmission, the
gear selector must be set in the P position
– otherwise the car cannot be locked or the
alarm armed.
2
To access the lock cylinder the door handle's
plastic cover must be detached:
1. Press the key blade approx. 1 cm straight
up into the hole on the underside of the
door handle/cover - do not prize.
> The plastic cover is prized loose automatically by the torque when the blade
is pushed straight up and into the opening.
After the driver's door has been opened by
person A with PCC-A, but person B with PCCB shall drive, the settings can be changed in
three ways:
• Standing by the driver's door, or sitting
behind the steering wheel, person B
Only in combination with power driver's seat and power mirrors.
``
* Option/accessory, for more information, see Introduction.
49
02 Locks and alarm
Keyless drive*
presses their PCC's unlock button, see
page 41.
02
The keyless system has a number of integrated
antennae located around the car:
• Select one of three possible memories for
Rear bumper, centre, inside
seat adjustment with seat button 1-3, see
page 72.
Door handle, left rear
• Adjust seat and mirrors manually, see
Parcel shelf, centre, underside
page 72 and 91.
Roof, centre above rear seat
Lock settings
Door handle, right rear
The Keyless function can be adapted by indicating in the menu system which doors should
be unlocked, under Car settings Lock
settings Keyless entry.
Centre console, under the rear section
Centre console, under the front section.
For a description of the menu system, see
page 124.
WARNING
People with pacemaker operations should
not come closer than 22 cm to the keyless
system's antennae with their pacemaker.
This is to prevent interference between the
pacemaker and the keyless system.
G020479
Antenna location
50
* Option/accessory, for more information, see Introduction.
02 Locks and alarm
Locking/unlocking
From the outside
The remote control key can lock/unlock all
doors and the boot lid simultaneously. Different sequences for unlocking can be selected,
see Unlocking with the remote control key,
page 41.
From the inside
• Pull the door handle once and release - the
Central locking
door is unlocked. Pull the door handle
again to open the door.
Locking
• Press the central locking button
Press and hold (at least 2 seconds) to also
close all the side windows and the sunroof*
simultaneously.
All doors can also be individually locked manually with their lock buttons - the door in question must then be closed.
WARNING
Automatic relocking
If none of the doors or the boot lid is opened
within 2 minutes of unlocking, all are locked
again automatically. This function reduces the
risk that the car is left unlocked unintentionally.
(For cars with alarm, see page 56.)
after
the front doors have been closed.
If it is not possible to lock/unlock with the
remote control key, the battery may be discharged - lock or unlock the driver's door with
the detachable key blade, see page 43.
Be aware that there is a risk that you can be
locked in the car if it is locked from the outside.
02
Global opening
Central locking.
All of the doors and the boot lid can be locked
or unlocked simultaneously using the central
locking button on either front door.
• Press one side
the other side
of the button to lock to unlock.
Unlocking
A door can be unlocked from the inside in two
different ways:
• Press the central locking button
.
Press and hold (at least 4 seconds) to also
open all the side windows* simultaneously.
Press and hold the central locking button
(at least 4 seconds) to also open all the windows simultaneously - for example, to quickly
ventilate the passenger compartment during
hot weather.
Automatic locking
The doors and boot lid are locked automatically when the car starts to move.
The function can be activated/deactivated
under Car settings Lock settings
Doors automatic lock. (For a description of
the menu system, see page 124.)
``
* Option/accessory, for more information, see Introduction.
51
02 Locks and alarm
Locking/unlocking
Glovebox
Boot lid
Unlocking with the remote control key
02
pressure plate under the outer handle and lift
the boot lid.
If the tailgate is not opened within 2 minutes
then it is relocked and the alarm is re-armed.
G020548
Two presses - The boot lid is unlocked and the
catch is disengaged at which the boot lid
opens about a centimetre - lift the outer handle
to open. Rain, cold, frost or snow could prevent
the tailgate from disengaging from the catch.
The glovebox can only be locked/unlocked
using the remote control key's detachable key
blade. (For information on the key blade, see
page 43).
NOTE
The alarm for the boot lid can be disarmed* and
the boot lid unlocked and opened on its own
by using the remote control key's
button.
Locking the glovebox:
Turn the key blade 90 degrees clockwise.
The keyhole is horizontal in the locked
position.
If the car is equipped with an alarm* the alarm
indicator on the instrument panel stops to
show that alarm for the whole of the car is not
armed. The alarm's level and movement sensors and the sensors for opening the boot lid
are disconnected.
Pull out the key blade.
The doors remain locked and armed.
Insert the key blade in the glovebox lock
cylinder.
• Unlock by carrying this out in reverse
order.
For information on privacy locking, see
page 45.
52
The boot lid can be opened in two
different ways
One press - The boot lid is unlocked, but
remains closed - press lightly on the rubberised
* Option/accessory, for more information, see Introduction.
•
When the boot lid/tailgate is unlocked
with 2 presses, automatic relocking
does not take place because the boot
lid/tailgate is open - it must be closed
manually.
•
After the boot lid/tailgate has been
closed it is unlocked and the alarm is
not armed - relock it and re-arm the
alarm with the remote control key's lock
.
button
02 Locks and alarm
Locking/unlocking
Unlocking with the key blade
Locking with the remote control key
Deadlocks*1
• Press the remote control key's button for
Deadlocks means that all lock buttons and
door handles are mechanically disengaged,
which prevents doors being opened from the
inside.
locking,
, see page 41.
If the car is equipped with an alarm* the alarm
indicator on the instrument panel starts to
flash, which means that the alarm is armed.
Unlocking the car from inside
02
The deadlocks are activated with the remote
control key and are set after an approximately
10 second delay after the doors have been
locked.
NOTE
If a door is opened within the delay time then
the sequence is interrupted and the alarm is
deactivated.
The car can only be unlocked from a deadlock
state with the remote control key. The driver's
door can also be unlocked with the detachable
key blade.
The boot lid can be opened manually with the
key blade if the car's battery has drained - the
boot lid cannot then be opened with the lighting panel button.
Prize loose the lock cylinder's cover.
To unlock/open the boot lid:
Press the lighting panel button (1) - the
catch releases and the boot lid is opened
a few centimetres.
Unlock the boot lid by turning the key blade
one half turn anticlockwise as illustrated.
3. Refit the cover.
1
Only in combination with alarm.
``
* Option/accessory, for more information, see Introduction.
53
02 Locks and alarm
Locking/unlocking
> The instrument panel display shows the
message Reduced guard See
manual and the deadlocks function is
switched off when the car is locked.
Temporary deactivation
02
or
Active menu options are indicated with a cross.
Navigation
If the deadlocks function shall be switched
off
ENTER
MENU
EXIT
If someone is going to stay in the car but the
doors must be locked from the outside, then
the deadlocks function can be temporarily
switched off. This is carried out as follows:
Press ENTER and lock the car. (Note that
the alarm's movement and tilt detectors*
are switched off at the same time, see
page 56.)
> The next time the engine is started, the
system is reset to zero and the instrument panel display shows the message
Full guard at which the deadlocks
function and the alarm's movement and
tilt detectors are re-engaged.
1. Access the menu system under Car
settings (for a detailed description of the
menu system, see page 124).
If the locking system shall not be changed
2. Select Reduced guard.
3. Select Activate once.
54
Select Ask on exit.
> Each time the engine is switched off the
audio system's display shows the message Press ENTER to reduce guard
until engine is started Press EXIT to
cancel. - then select one of the following alternatives:
or
* Option/accessory, for more information, see Introduction.
Select no options at all and lock the car.
Press EXIT and lock the car.
NOTE
•
Remember that the car's alarm is armed
when the car is locked.
•
If any of the doors are opened from the
inside then the alarm will be triggered.
WARNING
Do not allow anyone to remain in the car
without first deactivating the deadlocks to
avoid the risk of anyone being locked in.
02 Locks and alarm
Child safety locks
Manual blocking of the rear doors
NOTE
The child safety locks prevent children from
opening a rear door from the inside.
•
A door's knob control only blocks that
particular door - not both rear doors
simultaneously.
•
Cars with an electric child safety lock do
not have a manual child lock.
02
Press the button in the driver's door control
panel.
> The information display shows the message Rear child locks Activated and
the button's lamp illuminates when the
locks are active.
G021077
Electrical locking of the rear doors*
and power windows
The child safety locks are activated/deactivated in all key positions (see page 69 and up
to 2 minutes after the remote control key has
been removed from the ignition switch. If a
door is opened within this time, the function is
deactivated.
The child safety locks are located on the trailing
edge of the rear doors and are only accessible
when the doors are open.
To activate/deactivate the child safety locks:
Use the remote control key's detachable
key blade to turn the knob, see page 43.
The door is blocked against opening from
the inside.
The door can be opened from both the
outside and the inside.
Control panel driver's door.
When the electric child safety lock is active
then the rear:
• windows can only be opened with the driver's door control panel
• doors cannot be opened from inside.
* Option/accessory, for more information, see Introduction.
55
02 Locks and alarm
Alarm*
General
02
NOTE
Activated alarm is triggered if:
Do not attempt to repair or modify alarm
system components. All such attempts
could affect the terms of insurance.
• a door, the bonnet or the boot lid is opened
• a movement is detected in the passenger
compartment (if fitted with a movement
detector*)
•
Alarm indicator
the car is raised or towed away (if fitted
with a tilt detector*)
If there is a fault in the alarm system, the information display shows a message. In which
case, contact a workshop - an authorised
Volvo workshop is recommended.
56
Press the remote control key lock button.
Disarming the alarm
Press the remote control key unlock button.
Deactivating a triggered alarm
Press the remote control key unlock button
or insert the remote control key in the ignition switch.
Other alarm functions
Automatic re-arming of the alarm
This function prevents the car being left with
alarm disarmed unintentionally.
NOTE
To avoid this: Close the window/sunroof
when leaving the car. If the car's integrated
passenger compartment heater (or a portable electric heater) shall be used - direct the
airflow from the air vents so that they are not
pointing upwards in the passenger compartment.
• the battery's cable is disconnected
• the siren is disconnected.
The movement sensors trigger an alarm in
the event of movement in the passenger
compartment - air currents are also registered. For this reason the alarm is triggered
if the car is left with a window or the sunroof
open or if the passenger compartment
heater is used.
Arming the alarm
A red LED on the instrument panel indicates
the alarm system's status:
• LED not lit – Alarm not armed
• The LED flashes once every other second
– Alarm is armed
•
* Option/accessory, for more information, see Introduction.
The LED flashes rapidly after disarming the
alarm (and until the remote control key is
inserted in the ignition switch and key position I is selected) – Alarm has been triggered.
If the car is unlocked with the remote control
key (and the alarm is disarmed) but none of the
doors or the boot lid is opened within
2 minutes, then the alarm is automatically rearmed. The car is relocked at the same time.
Alarm signals
When the alarm is triggered, the following happens:
• A siren sounds for 30 seconds or until the
alarm is switched off. The siren has its own
02 Locks and alarm
Alarm*
battery which works independently of the
car battery.
• The direction indicators flash for 5 minutes
or until the alarm is switched off.
Testing the alarm system
Testing the alarm sensors for the bonnet
Testing the movement detector in the
passenger compartment
1. Sit in the car and deactivate the movement
sensor, see the previous section Reduced
alarm level.
1. Close all windows. Remain in the car.
Remote control key not working
If the alarm cannot be switched off with the
remote control key, e.g. if the key's battery is
discharged, the car can be disarmed and the
engine started as follows:
1. Open the driver's door with the key blade.
> The alarm is triggered, the alarm indicator flashes rapidly and the siren sounds.
2. Insert the remote control key in the ignition
switch.
> The alarm is deactivated and the alarm
indicator goes out.
3. Start the engine.
Reduced alarm level
To avoid accidental triggering of the alarm e.g. if a dog is left in the car or during transport
on a car train or a car ferry - the movement and
tilt sensors can be temporarily deactivated.
The procedure is the same as with the temporary disengaging of deadlocks, see page 53.
02
2. Arm the alarm, see page 56. Remain in the
car and lock the doors with the button on
the remote control key.
2. Arm the alarm, see page 56.
3. Wait 15 seconds.
4. Trigger the alarm by moving your arms forward and back at backrest height.
> A siren sounds and all direction indicators flash.
5. Deactivate the alarm by unlocking the car
with the remote control key.
Testing the alarm sensors in the doors
3. Wait 15 seconds.
4. Open the bonnet with the handle under the
dashboard.
> A siren sounds and all direction indicators flash.
5. Deactivate the alarm by unlocking the car
with the remote control key.
1. Arm the alarm, see page 56.
2. Wait 15 seconds.
3. Unlock the driver's door using the key
blade.
4. Open the driver's door.
> A siren sounds and all direction indicators flash.
5. Deactivate the alarm by unlocking the car
with the remote control key.
* Option/accessory, for more information, see Introduction.
57
Instruments and controls........................................................................ 60
Instruments and controls - Executive .................................................... 68
Key positions.......................................................................................... 69
Seats....................................................................................................... 71
Seats - Executive.................................................................................... 75
Steering wheel........................................................................................ 77
Lighting................................................................................................... 78
Wipers and washing................................................................................ 87
Windows, rearview and door mirrors...................................................... 89
Compass*................................................................................................ 94
Power sunroof*....................................................................................... 95
Alcoguard*.............................................................................................. 97
Starting the engine................................................................................ 101
Starting the engine – Flexifuel............................................................... 103
Starting the engine – external battery................................................... 105
Gearboxes............................................................................................. 106
All-wheel drive – AWD*......................................................................... 112
Foot brake............................................................................................. 113
Parking brake........................................................................................ 115
HomeLinkŸ *.......................................................................................... 118
58
* Option/accessory, for more information, see Introduction.
YOUR DRIVING ENVIRONMENT
03 Your driving environment
Instruments and controls
Instrument overview
03
Left-hand drive.
60
03 Your driving environment
Instruments and controls
Function
Page
Function
Page
Menus and messages,
direction indicators,
main/dipped beam, trip
computer
78,
81, 128,
160
Gear selector
106
Controls for active chassis (Four-C)*
164
Cruise control
165, 167
Wipers and washing
87, 88
Horn, airbags
20, 77
Steering wheel adjustment
77
Combined instrument
panel
63, 67
Parking brake
115
Menu, audio and phone
control
124,
142, 203
Bonnet opener
252
Seat adjustment*
71
Ignition switch
69
Start/stop button
101
Headlamp control,
opener for fuel filler flap
and boot lid
52, 78,
217
Hazard warning flashers
81
Door handle
–
Control panel
51, 55,
89, 91
Menu control and audio
system
124, 143
Climate control, ECC
133
03
``
* Option/accessory, for more information, see Introduction.
61
03 Your driving environment
Instruments and controls
03
Right-hand drive.
62
03 Your driving environment
Instruments and controls
Information displays
Function
Page
Function
Page
Hazard warning flashers
81
Steering wheel adjustment
77
Ignition switch
69
Start/stop button
101
78,
81, 128,
160
Cruise control
165, 167
Menus and messages,
direction indicators,
main/dipped beam, trip
computer
Combined instrument
panel
63, 67
Controls for active chassis (Four-C)*
164
Horn, airbags
20, 77
Gear selector
106
Menu, audio and phone
control
124,
142, 203
Climate control, ECC
133
87, 88
Menu control and audio
system
124, 143
Wipers and washing
Headlamp control,
opener for fuel filler flap
and boot lid
52, 78,
217
Door handle
–
Control panel
51, 55,
89, 91
Seat adjustment*
71
Bonnet opener
252
Parking brake
115
03
The information displays show information on
some of the car's functions, e.g. cruise control,
trip computer and messages. The information
is shown with text and symbols.
There are further descriptions under the functions that use the information displays.
``
* Option/accessory, for more information, see Introduction.
63
03 Your driving environment
Instruments and controls
Meters
Indicator, information and warning
symbols
symbols go out after 5 seconds except the
symbol for faults in the car's emissions system
and the symbol for low oil pressure.
Indicator and information symbols
Symbol
03
Specification
ABL fault
Emissions system
ABS fault
Meters in the combined instrument panel.
Speedometer
Fuel gauge. See also Trip computer, page
160, and Refuelling, page 217.
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
Indicator and warning symbols.
Main beam and direction indicator symbol
Indicator and information symbols
Indicator and warning
symbols1
Rear fog lamp on
Stability system
Engine preheater (diesel)
Functionality check
All indicator and warning symbols illuminate in
key position II or when the engine is started.
When the engine has started, all the symbols
should go out except the parking brake symbol, which only goes out when the brake is disengaged.
Low level in fuel tank
Information, read display text
Main beam On
If the engine does not start or if the functionality
check is carried out in key position II then all
1
64
For certain engine variants, the symbol for low oil pressure is not used. Warnings are made via display text. For information on checking the oil level, see page 253.
03 Your driving environment
Instruments and controls
Symbol
Specification
Left-hand direction indicators
Right-hand direction indicators
DRIVe - Start/Stop
ABL fault
The symbol illuminates if a fault has arisen in
the ABL function (Active Bending Lights).
Emissions system
If the symbol illuminates then it may be due to
a fault in the car's emissions system. Drive to
a workshop for checking. Volvo recommends
that you seek assistance from an authorised
Volvo workshop.
ABS fault
If this symbol illuminates then the system is not
working. The car's regular brake system continues to work, but without the ABS function.
1. Stop the car in a safe place and turn off the
engine.
2. Restart the engine.
3. If the symbol remains illuminated, drive to
a workshop to have the ABS system
checked. Volvo recommends that you
seek assistance from an authorised Volvo
workshop.
Rear fog lamp on
This symbol illuminates when the rear fog lamp
is on. There is only one fog lamp. It is located
on the driver's side.
NOTE
When a service message is shown, the symbol and message are cleared using the
READ button, or clear automatically after a
while.
Stability system
Main beam On
A flashing symbol indicates that the stability
system is operating. If the symbol illuminates
with constant glow then there is a fault in the
system.
The symbol illuminates when main beam is on
and with main beam flash
Engine preheater (diesel)
This symbol illuminates during engine preheating. Preheating occurs when the temperature
is below 2 °C. The car can be started once the
symbol goes out.
Low level in fuel tank
When the symbol illuminates the level in the
fuel tank is low, refuel as soon as possible.
03
Left/right-hand direction indicators
Both direction indicator symbols flash when
the hazard warning flashers are used.
Indicator and warning symbols
Symbol
Specification
Low oil pressureA
Parking brake applied
Information, read display text
When one of the car's systems does not
behave as intended, this information symbol
illuminates and a text appears on the information display. The message text is cleared with
the READ button, see page 128, or it disappears automatically after a time (time depending on which function is indicated). The information symbol can also illuminate in conjunction with other symbols.
Airbags – SRS
Seatbelt reminder
Alternator not charging
``
65
03 Your driving environment
Instruments and controls
Symbol
Specification
Fault in brake system
to have the system checked. Volvo recommends that you seek assistance from an
authorised Volvo workshop.
Seatbelt reminder
Warning
03
A
For certain engine variants, the symbol for low oil pressure
is not used. Warnings are made via display text, see pages
253 and 255.
Low oil pressure
If this symbol illuminates during driving then
the engine's oil pressure is too low. Stop the
engine immediately and check the engine oil
level, top up if necessary. If the symbol illuminates and the oil level is normal, contact a
workshop. Volvo recommends that you seek
assistance from an authorised Volvo workshop.
Parking brake applied
This symbol illuminates with a constant glow
when the parking brake is applied. The symbol
flashes during application, and then changes
over to a constant glow.
A flashing symbol means that a fault has arisen.
Read the message on the information display.
66
This symbol illuminates if someone in a front
seat has not put on their seatbelt or if someone
in a rear seat has taken off their seatbelt.
Alternator not charging
This symbol illuminates during driving if a fault
has occurred in the electrical system. Visit a
workshop. Volvo recommends that you seek
assistance from an authorised Volvo workshop.
Fault in brake system
If this symbol illuminates, the brake fluid level
may be too low. Stop the car in a safe place
and check the level in the brake fluid reservoir,
see page 257.
If the brake and ABS symbols illuminate at the
same time, there may be a fault in the brake
force distribution system.
1. Stop the car in a safe place and turn off the
engine.
2. Restart the engine.
Airbags – SRS
• If both symbols extinguish, continue
If this symbol remains illuminated or illuminates
while driving, it means a fault has been
detected in the seatbelt buckle, SRS, SIPS, or
IC systems. Drive immediately to a workshop
• If the symbols remain illuminated, check
driving.
the level in the brake fluid reservoir, see
page 257. If the brake fluid level is normal but the symbols are still illuminated,
the car can be driven, with great care, to
a workshop to have the brake system
checked. Volvo recommends that you
seek assistance from an authorised
Volvo workshop.
WARNING
If the brake fluid is under the MIN level in the
brake fluid reservoir, do not drive further
before topping up the brake fluid.
The loss of brake fluid must be investigated
by a workshop. Volvo recommends that you
contact an authorised Volvo workshop.
WARNING
If the brake and ABS symbols are illuminated at the same time, there is a risk that
the rear end will skid during heavy braking.
Warning
The red warning symbol illuminates when a
fault has been indicated which could affect the
safety and/or driveability of the car. An explanatory text is shown on the information display
at the same time. The symbol remains visible
until the fault has been rectified but the text
message can be cleared with the READ button, see page 128. The warning symbol can
03 Your driving environment
Instruments and controls
also illuminate in conjunction with other symbols.
Trip meter
Clock
Action:
1. Stop in a safe place. Do not drive the car
further.
03
2. Read the information on the information
display. Implement the action in accordance with the message in the display. Clear
the message using the READ button.
Reminder – doors not closed
If one of the doors, the bonnet2 or boot lid is
not closed properly then the information or
warning symbol illuminates together with an
explanatory text message in the combined
instrument panel. Stop the car in a safe place
as soon as possible and close the door, bonnet
or boot lid, whichever is open.
If the car is driven at a speed lower than
approx. 7 km/h then the information
symbol illuminates.
If the car is driven at a speed higher
than approx. 7 km/h then the warning
symbol illuminates.
2
Trip meter and controls.
Clock and setting knob.
Display for trip meter
Display for showing the time.
Controls for switching between trip meters
T1 and T2, as well as resetting the trip
meters.
Controls for setting the clock.
The meters are used to measure short distances.
One short press on the control switches
between the two trip meters T1 and T2. A long
press (more than 2 seconds) resets an active
trip meter to zero. The distance is shown in the
display.
Turn the knob clockwise/anticlockwise to set
the clock. Turn first to the end position and then
turn past/over the end position a further
approx. 1 mm - a "click" sounds and is felt in
the button. Each "click" scrolls 1 minute. In
order to change quickly - hold in the "click
position".
In connection with a message the clock can be
temporarily replaced by a symbol, see
page 128.
Only cars with alarm*.
* Option/accessory, for more information, see Introduction.
67
03 Your driving environment
Instruments and controls - Executive
Release the button when the clock
shows the correct time.
Analogue clock
• Press the button again - the indicator is
moved about 10 seconds in time.
G029076
03
Analogue clock.
Button for setting indicator backwards in
time.
Button for setting indicator forwards in
time.
The analogue clock is located in the instrument
panel above the glovebox.
To set the time:
Use the appropriate button to move the
indicators either forward or back in time.
Setting can be made by means of two
methods:
• Hold the button depressed - the indicator is first moved slowly in time, equivalent to about 5 minutes, then faster.
68
03 Your driving environment
Key positions
Insert and remove the remote control
key
Key position I
IMPORTANT
Foreign objects in the ignition switch may
jeopardise the function or destroy the lock.
With the remote control key inserted into the
ignition switch - Briefly press on START/STOP
ENGINE.
Do not press the remote control key incorrectly turned - Hold the end with the detachable key blade, see page 43.
Key position II
Withdraw the key
G021126
The remote control key is ejected after a gentle
press on it. (Automatic gearbox* must be in
position P.)
With the remote control key inserted into the
ignition switch - Press on START/STOP
ENGINE for about 2 seconds.
03
Back to key position 0
To return to key position 0 from position I or II
- Briefly press on START/STOP ENGINE.
Functions
Ignition switch with inserted remote control key.
NOTE
For cars with keyless function*, see
page 48.
The remote control key's 3 different key positions can be reached without the need to start
the engine. The table shows the functions
available in each key position.
NOTE
Insert the key
Hold the end of the remote control key with the
detachable key blade and insert the key in the
ignition switch. After a gentle press on the key
it is drawn into the lock.
To reach key position I or II without starting
the engine - do not depress the brake/
clutch pedal when the following operations
are carried out.
Key position 0
Insert the remote control key in the ignition
switch and gently press it - The key is drawn
into the lock.
``
* Option/accessory, for more information, see Introduction.
69
03 Your driving environment
Key positions
Position
Function
0
Odometer, clock and temperature gauge are illuminated. The
steering lock is deactivated. The
audio system can be used.
I
Sunroof*, power windows, 12 V
socket in the passenger compartment, RTI*, phone*, ventilation
fan, ECC and windscreen wipers
can be used.
II
The headlamps come on. Warning/indicator lamps illuminate for
5 seconds. All equipment operates apart from heated seats and
rear window defroster, which only
work when the engine is running.
03
For information on the audio system's functions with remote control key removed, see
page 142.
Starting and stopping the engine
For information about starting/switching off the
engine, see page 101.
Towing
For important information about the remote
control key during towing, see page 231.
70
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Seats
Front seats
WARNING
Adjust the position of the driver's seat
before setting off, never while driving. Make
sure that the seat is in locked position in
order to avoid personal injury in the event of
sudden braking or an accident.
Lift the catches on the rear of the backrest
and fold it forward.
4. Push the seat forward so that the head
restraint "locks" in under the glovebox.
Raising takes place in reverse order.
03
WARNING
Lowering the front seat backrest
Grasp the backrest and make sure that it is
properly locked after being folded up in
order to avoid personal injury in the event of
sudden braking or an accident.
Lumbar support adjustment, turn the
wheel1.
Forward/backward: lift the handle to adjust
the distance to the steering wheel and pedals. Check that the seat is locked after
changing position.
Raise/lower* front edge of seat cushion,
pump up/down.
Adjust backrest rake, turn the wheel.
1
The passenger seat backrest can be folded
forward to make room for long loads.
Raise/lower the seat, pump up/down.
Move the seat as far back/down as possible.
Control panel for power seat*.
Adjust the backrest to an upright position.
Also applies to power seat.
``
* Option/accessory, for more information, see Introduction.
71
03 Your driving environment
Seats
Power seat*
trol key without the key in the ignition switch.
Seat adjustment is normally made in key position I and can always be made when the engine
is running.
Seat with memory function*
03
2. Hold the button depressed to store settings while depressing one of the memory
buttons.
Using a stored setting
Hold one of the memory buttons depressed
until the seat and the door mirrors stop. If you
release the button then the movement of the
seat will stop.
Key memory* in remote control key2
The positions of the driver's seat and the door
mirrors3 are stored in the key memory when the
car is locked with the remote control key.
Front edge of seat cushion up/down
Seat forward/backward and up/down
Backrest rake
The power front seats have overload protection
which is tripped if a seat is blocked by an
object. If this happens, go to key position I or
0 and wait a short time before adjusting the
seat again.
Store setting
Memory button
Memory button
Memory button
Only one movement (forward/back/up/down)
can be made at a time.
Preparations
Button for storing settings
1. Adjust the seat and the door mirrors.
The seats can be adjusted for a certain time
after unlocking the door with the remote con2
3
72
For key memory for keyless drive, see page 49.
Only if the car is equipped with power seat and retractable power door mirrors.
* Option/accessory, for more information, see Introduction.
When the car is unlocked with the same remote
control key it was locked with and the driver's
03 Your driving environment
Seats
door is opened, the driver's seat and also the
door mirrors automatically adopt the positions
stored in the key memory.
NOTE
The seat and the door mirrors do not move
if they are already set the relevant position.
WARNING
Risk of crushing! Make sure that children do
not play with the controls. Check that there
are no objects in front of, behind or under
the seat during adjustment. Ensure that
none of the backseat passengers will be
trapped.
It is also possible to use the key memory by
pressing the unlock button on the remote control key when the driver's door is open.
Heated/ventilated seats*
The key memory can be activated/deactivated
under Car Key memory Seat & mirror
positions. For a description of the menu system, see page 124.
Rear seats
NOTE
The key memory in the two remote control
keys and the seat's three memories are
completely independent of each other.
03
For heated/ventilated seats, see page 133.
The backrest is in two sections, they can be
folded forward, together or separately.
Lowering the rear seat backrest
1. Pull the handle(s). First raise the head
restraints if they are lowered.
IMPORTANT
There must be no objects on the rear seat
when the backrest is to be folded down. The
seat belts must not be connected either.
Otherwise there is a risk of damaging the
rear seat upholstery.
2. Fold the backrest forward. Lower the centre head restraint fully if the backrest's
wide section shall be lowered.
WARNING
Emergency stop
If the seat accidentally begins to move, press
one of the buttons to stop the seat.
Take hold of the backrests and make sure
they are locked properly after opening them
out in order to prevent injury under hard
braking or in the event of an accident.
Restarting to reach the seat position stored in
the key memory is performed by pressing the
unlock button on the remote control key. The
driver's door must then be open.
``
* Option/accessory, for more information, see Introduction.
73
03 Your driving environment
Seats
Head restraint, centre seat, rear
Electrical lowering of the rear seat's
outer head restraints*
03
The head restraint can be adjusted vertically to
suit the height of the passenger. The upper
edge of the head restraint should be aligned
with middle of the back of the head. Slide it up
as required.
To lower the head restraint again the button by
the left-hand shaft must be pressed in while the
head restraint is pressed down.
1. The remote control key must be in position
I or II.
2. Press the button to lower the rear outer
head restraints to improve rearward visibility.
WARNING
Do not lower the outer head restraints if
there are any passengers using of the outer
seats.
Move the head restraint back manually until a
click is heard.
74
* Option/accessory, for more information, see Introduction.
WARNING
The head restraints must be in locked position after being raised.
03 Your driving environment
Seats - Executive
Comfort seats, front
Massage
Setting lumbar
Adjusting the seat, front - rear.
Button for activating massage.
Hard massage
Control panel for massage and lumbar.
Soft massage
Each front seat has massage in the backrest.
The massage is performed by air cushions that
can massage with either a hard or soft setting.
When one of the settings is selected the massage is carried out in accordance with the
cycle: massage 6 minutes - pause 4 minutes massage 6 minutes etc.
When the button is in the centre position, or
when the remote control key is in position 0,
massage is not activated.
G030227
G030131
G030132
03
Button for setting lumbar.
The lumbar support is set with the same air
cushions used for massage. Adjustment can
be made steplessly both in terms of depth and
height using the control button, see the illustration above.
Lumbar support can be set when massage is
not active.
A memory function recalls the lumbar setting
when massage is stopped or when the pressure in the air cushions has decreased, e.g.
after a longer period of parking.
``
75
03 Your driving environment
Seats - Executive
Adjusting the seat, front - rear
G030137
03
The illustration above shows a left-hand drive car.
The passenger seat can be adjusted front rear. The seat can be moved forward or backward as long as the front or rear part of the
button respectively is held depressed, see
illustration above. The angle of the backrest is
not changed.
76
03 Your driving environment
Steering wheel
Adjusting
Horn
WARNING
Adjust and secure the steering wheel before
driving.
With speed related power steering* the level of
steering force can be adjusted, see
page 164.
03
G021138
Keypads*
Adjusting the steering wheel.
Horn.
Lever - releasing the steering wheel
Press the centre of the steering wheel to signal.
Possible steering wheel positions
The steering wheel can be adjusted for both
height and depth:
1. Pull the lever towards you to release the
steering wheel.
2. Adjust the steering wheel to the position
that suits you.
3. Push back the lever to fix the steering
wheel in place. If the lever is stiff, press the
steering wheel lightly at the same time as
you push the lever back.
Keypads in the steering wheel.
Cruise control, see page 165
Adaptive cruise control, see page 167
Audio and phone control, see page 142
* Option/accessory, for more information, see Introduction.
77
03 Your driving environment
Lighting
Light switches
The display lighting is automatically subdued
in darkness - the sensitivity is set with the
thumbwheel.
Main/dipped beam
The intensity of the instrument lighting is
adjusted with the thumbwheel.
Headlamp levelling
Overview, light switches.
Thumbwheel1 for adjusting display and
instrument lighting
Rear fog lamp
Front fog lamps*
Light switches
The load in the car changes the vertical alignment of the headlamp beam, which could dazzle oncoming motorists. Avoid this by adjusting
the height of the beam. Lower the beam if the
car is heavily laden.
1. Allow the engine to run or have the remote
control key in position I.
2. Roll the thumbwheel up/down to raise/
lower beam alignment.
G021142
G021141
03
Headlamp control and stalk switch.
Position for main beam flash
Position for main beam
Cars with Xenon headlamps* have automatic
headlamp levelling and therefore do not have
the thumbwheel.
Thumbwheel2 for headlamp levelling
Instrument lighting
Different display and instrument lighting is
switched on depending on key position, see
page 69.
1
2
78
For cars equipped with Executive, the thumbwheel also adjusts brightness for auxiliary lighting in handles, storage compartments in doors, analogue clock, cup holder in tunnel console and front
floor lighting.
Not available for cars equipped with Xenon headlamps*.
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Lighting
Position
Specification
AutomaticA/deactivated dipped
beam. Only main beam flash.
Position/parking lamps
Dipped beam. Main beam and
main beam flash work in this
position.
A
Applies to certain markets.
NOTE
Main beam can only be activated in position
.
Main beam flash
Move the stalk switch gently towards the steering wheel to the position for main beam flash.
Main beam comes on until the stalk switch is
released.
Dipped beam
When the engine is started, dipped beam is
activated automatically3 if the headlamp con. If necessary, autotrol is in position
matic dipped beam for this position can be
3
deactivated by a workshop. Volvo recommends that you contact an authorised Volvo
workshop.
Active Xenon headlamps - ABL*
In position
dipped beam is always activated automatically when the engine is running
or when the remote control key is in position
II.
03
Main beam
Main beam can only be activated when the
. Actiheadlamp control is in position
vate/deactivate main beam by moving the stalk
switch towards the steering wheel to the end
position and release.
When main beam has been activated the symilluminates in the combined instrubol
ment panel.
Headlamp pattern with function deactivated (left)
and activated (right) respectively.
If the car is equipped with active Xenon headlamps (Active Bending Lights - ABL) the light
from the headlamps follows the steering wheel
movement in order to provide maximum lighting in bends and junctions and so provide
increased safety.
The function is activated automatically when
the car is started. In the event of a fault in the
symbol illuminates in the
function the
combined instrument panel at the same time
as the information display shows an explanatory text and a further illuminated symbol.
Applies to certain markets.
``
* Option/accessory, for more information, see Introduction.
79
03 Your driving environment
Lighting
Headlamp
failure
Service
required
03
Specification
The system
is disengaged. Visit
a workshop
if the message
remains.
Volvo recommends
that you
contact an
authorised
Volvo workshop.
The function is only active in twilight or darkness and only when the car is moving.
The function4 can be activated/deactivated
under Car settings Light settings
Active bending lights. For a description of the
menu system, see page 124.
For headlamp pattern adjustment, see
page 83.
4
80
Activated on delivery from the factory.
Position/parking lamps
Brake lights
The brake light automatically comes on during
braking. For information on the Emergency
brake lights and automatic hazard warning
flashers, see page 113.
Front fog lamps
Headlamp control in position for position/parking
lamps.
Turn the headlamp control to the centre position (number plate lighting comes on at the
same time).
Rear position lamps also come on when the
boot lid is opened in order to alert anybody
behind.
G021145
Display
G021144
Symbol
Button for front fog lamps.
The front fog lamps* can be switched on along
with main/dipped beam or
position/parking lamps.
Press the button for on/off. The light in the button illuminates when the fog lamps are on.
03 Your driving environment
Lighting
NOTE
NOTE
Regulations for using front fog lamps vary
between different countries.
Regulations for using rear fog lamps vary
between different countries.
tion on Emergency brake lights and automatic
hazard warning flashers, see page 113.
Direction indicators/flashers
Hazard warning flashers
03
G021146
G021148
Rear fog lamp
Direction indicators/flashers.
Button for rear fog lamp.
Button for hazard warning flashers.
The rear fog lamp consists of one rear lamp and
can only be switched on in combination with
main/dipped beam or the front fog lamps.
Press the button to activate the hazard warning
flashers. Both direction indicator symbols in
the combined instrument panel flash when the
hazard warning flashers are in use.
Press the button for On/Off. The rear fog lamp
on the combined
indicator symbol
instrument panel and the light in the button illuminate when the rear fog lamp is switched on.
The rear fog lamp is switched off automatically
when the engine is switched off.
The hazard warning flashers are activated
automatically when the car brakes so suddenly
that the emergency brake lights are activated
and speed is below 30 km/h. They remain on
when the car has stopped and are deactivated
automatically when the car is driven off again
or the button is depressed. For more informa-
Short flash sequence
Move the stalk switch up or down to the
first position and release. The direction
indicators flash three times. The function
can be activated/deactivated under Car
settings Light settings Turn
indicators, 3flash. For a description of the menu system, see page 125.
Continuous flash sequence
Move the stalk switch up or down to the
outer position.
``
81
03 Your driving environment
Lighting
The stalk switch remains in its position and is
moved back manually, or automatically by the
steering wheel movement.
• the engine has been switched off and the
remote control key is in position 0
• the car has been unlocked but the engine
has not been started.
Direction indicator symbols
Glovebox lighting is switched on and off
respectively when the lid is opened or closed.
Vanity mirror
For direction indicator symbols, see page 64.
Front roof lighting
Interior lighting
The front reading lamps are switched on or off
by pressing the relevant button in the roof console.
03
Glovebox lighting
The lighting for the vanity mirror, see
page 200, is switched on and off respectively
when the cover is opened or closed.
Automatic lighting
The switch for passenger compartment lighting has three positions for the lighting in the
passenger compartment:
Rear roof lighting
• Off – right-hand side depressed, automatic
lighting deactivated.
• Neutral position – automatic lighting activated.
G021149
• On – left-hand side depressed, passenger
G021150
compartment lighting on.
Controls in roof console for the front reading
lamps and passenger compartment lighting.
Reading lamp, left-hand side
Rear roof lighting.
Reading lamp, right-hand side
The lamps are switched on or off by pressing
each respective button.
Interior lighting
All lighting in the passenger compartment can
be switched on and off manually within
30 minutes from when:
Courtesy lighting
Courtesy lighting (and passenger compartment lighting) is switched on and off respectively when a side door is opened or closed.
Neutral position
When the button is in neutral position the passenger compartment lighting is switched on
and off automatically in accordance with the
following.
The passenger compartment lighting is
switched on and remains on for 30 seconds if:
• the car is unlocked with the remote control
key or key blade, see pages 41 or 44
• the engine is switched off and the remote
control key is in position 0.
82
03 Your driving environment
Lighting
• the engine is started
• the car is locked.
The length of time for which the home safe
lighting should be kept on can be set under Car
settings Light settings Home safe light
duration. For a description of the menu system, see page 124.
The passenger compartment lighting comes
on and remains on for two minutes if one of the
doors is open.
Approach light duration
Home safe light duration
Some of the exterior lighting can be kept
switched on to work as home safe lighting after
the car has been locked.
1. Remove the remote control key from the
ignition switch.
2. Move the left-hand stalk switch toward the
steering wheel to the end position and
release it. The function can be activated in
the same way as with main beam flash, see
page 78.
03
Approach lighting is switched on with the
remote control key, see page 41, and is used
to switch on the car's lighting at a distance.
When the function is activated with the remote
control, parking lamps, door mirror lamps,
number plate lighting, interior roof lamps and
courtesy lighting are switched on.
G021151
If any lighting is switched on manually and the
car is locked then it will be switched off automatically after two minutes.
Adjusting headlamp pattern
Headlamp pattern, left-hand traffic.
The length of time for which the approach lighting should be kept on can be set under Car
settings Light settings Approach light
duration. For a description of the menu system, see page 124.
G021152
Passenger compartment lighting is switched
off when:
3. Get out of the car and lock the door.
When the function is activated, dipped beam,
parking lamps, door mirror lamps, number
plate lighting, interior roof lamps and courtesy
lighting are switched on.
Headlamp pattern, right-hand traffic.
The headlamp pattern must be adjusted to
avoid dazzling oncoming motorists and can be
set for right or left-hand traffic. The correct pattern will also better illuminate the verge.
``
83
03 Your driving environment
Lighting
Xenon headlamps*
Example 1
If a car that is delivered in Sweden shall be
driven in the UK then the headlamps must be
set to the adjusted position, see preceding
illustration.
Example 2
03
G019442
A car that is delivered in the UK is designed for
left-hand traffic and is driven there with the
headlamps in normal position, see preceding
illustration.
Headlamp control for adjusting headlamp pattern.
Normal position – the headlamp pattern is
correct for the country in which the car was
delivered.
Adapted position – designed for opposite
headlamp pattern.
WARNING
Halogen headlamps
The headlamp pattern for halogen headlamps
is readjusted by masking the headlamp lens.
The headlamp pattern may not be as good.
Masking the headlamps
1. Copy the A and B templates for left-hand
drive cars or the C and D templates for
right-hand drive cars with a scale of 1:2,
see page 86. Use a photocopier with a
zoom function for example:
• A = LHD Right (left-hand drive, right
The headlamps must be handled with
extreme care due to the Xenon lamp being
supplied from a high-voltage unit.
lens)
• B = LHD Left (left-hand drive, left lens)
• C = RHD Right (right-hand drive, right
The country in which the car is delivered determines whether normal position is designed for
right or left-hand traffic.
lens)
• D = RHD Left (right-hand drive, left lens)
2. Transfer the template to a self-adhesive
waterproof material and cut it out.
84
* Option/accessory, for more information, see Introduction.
3. Start from the design line on the headlamp
lenses, see the dotted line on the side
85. Position the self-adhesive templates
at the right distance from each design line
using the illustration and the dimensions in
the following list:
•
•
•
•
A = LHD Right - approx. 86 mm
B = LHD Left - approx. 40 mm
C = RHD Right - 0 mm
D = RHD Left - approx. 96 mm
03 Your driving environment
Lighting
Aligning the templates
G033954
03
Upper row: masking left-hand drive cars, templates A and B. Lower row: masking right-hand drive cars, templates C and D.
``
85
03 Your driving environment
Lighting
Templates for halogen headlamps
G021155
03
86
03 Your driving environment
Wipers and washing
Windscreen wipers1
Continuous wiping
The wipers sweep at normal speed.
When the rain sensor is activated a light in the
button the rain sensor symbol
is shown
in the right-hand display in the combined
instrument panel.
The wipers sweep at high speed.
IMPORTANT
Rain sensor, on/off
Thumbwheel sensitivity/frequency
IMPORTANT
Use plenty of washer fluid when the wipers
are cleaning the windscreen. The windscreen must be wet when the windscreen
wipers are operating.
Windscreen wipers off
Move the stalk switch to position 0 to
switch off the windscreen wipers.
Single sweep
Raise the stalk switch and release to
make one sweep.
Intermittent wiping
Set the number of sweeps per time
unit with the thumbwheel when intermittent wiping is selected.
1
03
Activating and setting the sensitivity
Before activating the wipers during winter ensure that the wiper blades are not frozen
in, and that any snow or ice on the windscreen is scraped away.
Windscreen wipers and windscreen washers.
the rain sensor can be adjusted using the
thumbwheel.
Service position wiper blade
When activating the rain sensor, the car must
be running or the remote control key in position
I or II while the windscreen wiper stalk switch
must be in position 0 or in the position for a
single sweep.
Activate the rain sensor by pressing the button
. The windscreen wipers make one
sweep.
Press the stalk switch up for the wipers to make
an extra sweep.
For cleaning the windscreen/wiper blades and
replacement of wiper blades see see
page 266 and 280.
Turn the thumbwheel upward for higher sensitivity and downward for lower sensitivity. (An
extra sweep is made when the thumbwheel is
turned upward.)
Rain sensor*
Deactivating
The rain sensor automatically starts the windscreen wipers based on how much water it
detects on the windscreen. The sensitivity of
Deactivate the rain sensor by pressing the butor move the stalk switch down to
ton
another wiper program.
Replacing the wiper blades see page 266, service position, wiper blade see page 266 and filling washer fluid see page 267.
``
* Option/accessory, for more information, see Introduction.
87
03 Your driving environment
Wipers and washing
The rain sensor is automatically deactivated
when the remote control key is removed from
the ignition switch or five minutes after the
engine has been switched off.
IMPORTANT
03
The windscreen wipers could start and be
damaged in an automatic car wash. Deactivate the rain sensor while the car is running
or the remote control key is in position I or
II. The symbol in the combined instrument
panel and the lamp in the button go out.
Washing the windscreen
Move the stalk switch toward the steering
wheel to start the windscreen and headlamp
washers.
The windscreen wipers will make several more
sweeps and the headlamps are washed once
the stalk switch has been released.
Heated washer nozzles*
The washer nozzles are heated automatically
in cold weather to prevent the washer fluid
freezing solid.
High-pressure headlamp washing*
High-pressure headlamp washing consumes a
large quantity of washer fluid. To save fluid, the
headlamps are washed automatically at every
fifth windscreen wash cycle.
G025416
Washing the headlamps and windows
Washing function.
88
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Windows, rearview and door mirrors
General
windscreen with no heat-reflecting film (see the
highlighted area in the above illustration).
Heat-reflecting windscreen*
Laminated glass
The glass is reinforced which provides better protection against
break-ins and improved sound insulation in the passenger compartment.
The windscreen and the side windows* have
laminated glass.
Power windows
03
Water and dirt-repellent coating*
Areas where IR film is not applied.
Dimensions
IMPORTANT
Do not use a metal ice scraper to remove ice
from the windows. Use the defroster to
remove ice from the mirrors, see
page 93.
G018516
The front side windows are treated
with a coating that improves the view
in difficult weather conditions. Maintenance,
see page 281.
A
47 mm
B
87 mm
Driver's door control panel.
Switch for electric child safety locks* and
disengaging rear power window buttons,
see page 55.
The windscreen is equipped with a heatreflecting film (IR) that reduces the solar heat
radiation into the passenger compartment.
The positioning of electronic equipment, such
as a transponder, behind a glass surface with
heat-reflecting film may affect its function and
performance.
For the optimal function of electronic equipment, it should be positioned on the part of the
Rear window controls
Front window controls
WARNING
Check that none of the rear seat passengers
is in danger of becoming trapped in any way
when closing the windows from the driver's
door.
``
* Option/accessory, for more information, see Introduction.
89
03 Your driving environment
Windows, rearview and door mirrors
WARNING
Make sure that children or other passengers
are not in danger of becoming trapped in
any way when closing the windows, in particular when the remote control key is used.
03
WARNING
If there are children in the car, remember to
always switch off the power supply to the
power windows by removing the remote
control key if the driver leaves the car.
Operating
All power windows can be operated using the
control panel in the driver's door. Each control
panel in the other doors can only control its
own respective power window. The power windows can only be controlled with one control
panel at a time.
Operating with auto
In order that the power windows can be used
the remote control key must be in position I or
II. After the car has been running the power
windows can be operated for several minutes
even when the remote control key has been
removed, but not however after the door has
been opened.
To remotely operate the power windows from
the outside with the remote control key or from
inside with central locking, see pages 41 and
51
Closing of the windows is stopped and the
window is opened if anything prevents its
movement. It is possible to force the pinch protection when closing has been interrupted, e.g.
with ice, by continuously holding the button up
until the window is closed. The pinch protection is reactivated after a brief pause.
G018517
NOTE
One way to reduce the pulsating wind noise
when the rear windows are open is to also
open the front windows slightly.
Operating the power windows.
90
Operating without auto
Operating without auto
Operating with auto
Move one of the controls up/down gently. The
power windows move up/down as long as the
control is held in position.
Move one of the controls up/down to the end
position and release it. The window runs automatically to its end position.
Operating with the remote control key
and central locking
Resetting
If the battery is disconnected then the function
for automatic opening must be reset so that it
can work correctly.
1. Gently raise the front section of the button
to raise the window to its end position and
hold it there for one second.
2. Release the button briefly.
3. Raise the front section of the button again
for one second.
WARNING
Resetting must be carried out to ensure that
pinch protection works.
03 Your driving environment
Windows, rearview and door mirrors
Sun blinds*
Door mirrors
Rear window
Rear door
G018518
03
Hook with associated catch
Sun blinds are built into the panel on each rear
door.
1. Pull up the sun blind and hook it into the
hook in the upper door frame.
2. Lock the sun blind by moving the catch
upwards.
The window can also be opened and closed
when the sun blind is pulled up.
There is a sun blind built into the rear parcel
shelf.
Door mirror controls.
Pull up the sun blind and hook it into the
roof clip using the two hooks for the blind.
> The spring force in the blind keeps the
hooks in position.
1. Press the L button for the left-hand door
mirror or the R button for the right-hand
door mirror. The light in the button illuminates.
When the sun blind is not in use - unhook it,
hold onto the handle and allow the blind to roll
up slowly.
2. Adjust the position with the joystick in the
centre.
Adjusting
3. Press the L or R button again. The light
should no longer be illuminated.
WARNING
The mirrors are the wide angle type for optimum surveillance. Objects may appear further away than they actually are.
``
* Option/accessory, for more information, see Introduction.
91
03 Your driving environment
Windows, rearview and door mirrors
03
Retractable power door mirrors*
Angling the door mirror when parking1
The mirrors can be retracted for parking/driving
in narrow spaces:
The door mirror can be angled down for the
driver to view the side of the road when parking
for example.
The function can be activated/deactivated
under Car settings Side mirror settings
Fold mirr. when locking. For a description
of the menu system, see page 124.
Resetting to neutral
1. Press the buttons L and R simultaneously
(the remote control key must be at least in
key position I).
2. Release them after
approximately 1 second. The mirrors automatically stop in the fully retracted position.
When reverse gear is disengaged the mirror
automatically returns to its original position
after about 10 seconds, or earlier by pressing
the button labelled L or R respectively
Fold out the mirrors by pressing down the L
and R buttons simultaneously. The mirrors
automatically stop in the fully extended position.
Automatic angling of the door mirror
when parking1
Storing the position*
The mirror positions are stored in the key memory when the car has been locked with the
remote control key. When the car is unlocked
with the same remote control key the mirrors
and the driver's seat adopt the stored positions
when the driver's door is opened.
The function can be activated/deactivated
under Car Key memory Seat & mirror
positions. For a description of the menu system, see page 124.
1
92
Engage reverse gear and press the L or R
button.
When reverse gear is engaged the door mirror
is automatically angled down so that the driver
can see the side of the road when parking for
example. When reverse gear is disengaged the
mirror automatically returns to its original position after a while.
The function can be activated/deactivated
under Car settings Side mirror settings
Auto tilt left mirror or Auto tilt right
mirror. For a description of the menu system,
see page 124.
Automatic retraction when locking
When the car is locked/unlocked with the
remote control key the door mirrors are automatically retracted/extended.
Only in combination with power seat with memory, see page 72.
* Option/accessory, for more information, see Introduction.
Mirrors that have been moved out of position
by an external force must be reset electrically
to the neutral position for electric retracting/
extending to work correctly:
1. Retract the mirrors with the L and R buttons.
2. Fold them out again with the L and R buttons.
3. Repeat the above procedure as necessary.
The mirrors are now reset in neutral position.
Home safe and approach lighting
The light on the door mirrors illuminates when
approach lighting or home safe lighting is
selected, see page 83.
03 Your driving environment
Windows, rearview and door mirrors
Rear window and door mirror
defrosters
Automatic dimming*
settings Auto. rear defroster. For a
description of the menu system, see
page 124.
Bright light from behind is automatically
dimmed by the rearview mirror. The control is
not available in mirrors with automatic dimming.
Interior rearview mirror
The compass* can only be specified for rearview mirrors with automatic dimming, see
page 94.
One press of the button starts the heating. The
light in the button indicates that the function is
active. Disconnect the heating as soon as the
ice/misting is cleared in order not to load the
battery unnecessarily. However, the heating is
switched off automatically after a certain time.
Following which, the heating is switched on
and off automatically as long as the outside
temperature is below +7 °C.
The heating can be engaged automatically if
the car is started in an outside temperature
lower than +7 °C. The automatic defrosting
function must then be activated under Climate
G021342
Use the defroster to quickly remove misting
and ice from the rear window and the door mirrors.
03
Control for dimming
Manual dimming
Bright light from behind could be reflected in
the rearview mirror and dazzle the driver. Use
dimming with the dimming control when lights
from behind are distracting:
1. Use dimming by moving the control in
towards the passenger compartment.
2. Return to normal position by moving the
control towards the windscreen.
* Option/accessory, for more information, see Introduction.
93
03 Your driving environment
Compass*
Operation
Calibration
Selecting the zone
The compass may need calibrating to work
correctly. C is shown in the mirror's display if
the compass needs calibrating.
1. Stop the car in a large open area free from
steel structures and high-voltage power
lines.
03
2. Start the car.
Rearview mirror with compass.
The upper right-hand corner of the rearview
mirror has an integrated display that shows the
compass direction in which the front of the car
is pointing. Eight different directions are shown
with English abbreviations: N (north), NE (north
east), E (east), SE (south east), S (south), SW
(south west), W (west) and NW (north west).
3. Press and hold the button on the rear of the
rearview mirror (use a paper clip or similar)
until C is shown again (approx. 6 seconds).
4. Drive off as usual. C disappears from the
display when calibration is complete.
The compass is activated automatically when
the car is started or in key position II, see
page 69. To deactivate/activate the compass press in the button on the rear side of the mirror
using a paper clip for example.
Alternative calibration method: Drive
slowly in a circle at a speed of no more than
8 km/h until C disappears from the display
when calibration is complete.
G030295
NOTE
For optimum calibration - switch off all electrical equipment (climate control system,
wipers etc.) and make sure that all doors are
closed.
Magnetic zones.
The earth is divided into 15 magnetic zones.
The correct zone must be selected for the compass to work correctly.
1. The remote control key should be in position II, see page 69.
2. Press and hold the button on the rear of the
rearview mirror (use a paper clip or similar)
for at least 3 seconds. The number for the
current area is shown.
3. Press the button repeatedly until the number for the required geographic area
(1–15) is shown.
4. The display will revert to showing the compass direction after a few seconds.
94
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Power sunroof*
General
The sunroof controls are located in the roof
panel. The sunroof can be opened vertically at
the rear edge and horizontally. Key position I or
II is required for the sunroof to be opened.
Open manually by pulling the control backwards to the point of resistance for manual
opening. The sunroof moves to maximum open
position as long as the button is kept
depressed.
Vertical opening
Closing
Horizontal opening
03
G028899
Close manually by pushing the control forwards to the point of resistance for manual
closing. The sunroof moves to closed position
as long as the button is kept depressed.
WARNING
G021343
Risk of crushing when sunroof is closed.
The sunroof's pinch-protection function
only operates during automatic closing, not
manual.
Horizontal opening, backward/forward.
Opening, automatic
Opening, manual
Closing, manual
Closing, automatic
Opening
For maximum sunroof opening, move the control back to the position for automatic opening
and release.
Close automatically by pressing the control to
the position for automatic closing and then
release it.
Vertical opening, raised at the rear edge.
Open by pressing the rear edge of the control upward.
Close by pulling the rear edge of the control down.
The power supply to the sunroof is switched off
by removing the remote control key from the
ignition switch.
WARNING
If there are children in the car:
Remember to always switch off the power
supply to the sunroof by removing the
remote control key if the driver leaves the
car.
``
* Option/accessory, for more information, see Introduction.
95
03 Your driving environment
Power sunroof*
Closing using the remote control key or
central locking button
Pinch protection
The sunroof's pinch protection function is triggered if it is blocked by an object during automatic closing. If blocked, the sunroof will stop
and automatically open to the previous position.
03
G021345
Wind deflector
One long press on the lock button closes the
sunroof and all the windows, see pages 41 and
51 . The doors and the boot lid are locked. To
interrupt closing, press the lock button again.
WARNING
If the sunroof is closed using the remote
control key, check that no one is in danger
of becoming trapped in any way.
The sunroof has a wind deflector that is folded
up when the sunroof is in the open position.
Sunscreen
The sunroof features a manual, sliding interior
sunscreen. The sunscreen slides back automatically when the sunroof is opened. Grip the
handle and slide the screen forward to close it.
96
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Alcoguard*
General information on the Alcolock
1. Nozzle for breath test.
The function of the Alcolock is to prevent the
car from being driven by individuals under the
influence of alcohol. Before the engine can be
started the driver must take a breath test that
verifies that he/she is not under the influence
of alcohol. Alcolock calibration takes place in
accordance with each market's limit value in
force for driving legally.
2. Switch.
WARNING
The Alcolock is an aid and does not exempt
the driver from responsibility. It is always the
responsibility of the driver to be sober and
to drive the car safely.
NOTE
Store the Alcolock in its holder. This will
keep the built-in battery fully charged and
the Alcolock is activated automatically
when the car is opened.
3. Transmission button.
4. Lamp for battery status.
5. Lamp for result of breath test.
6. Lamp indicates ready for breath test.
Before starting the engine
Operation
The Alcolock is activated automatically and is
then ready for use when the car is opened.
Battery
1. When indicator lamp (6) is green the Alcolock is ready for use.
Alcolock indicator lamp (4) shows battery status:
Lamp (4)
Battery status
Green flashing
Charging in progress
Green
Fully charged
Yellow
Semi-charged
Red
Discharged - fit the
charger in the holder
or connect the
power supply cable
from the glovebox.
Functions
03
2. Withdraw the Alcolock from its holder. If
the Alcolock is outside the car when it is
unlocked then it must first be activated
with the switch (2).
3. Fold up the nozzle (1), take a deep breath
and blow with an even pressure until a
"click" is heard after approx. 5 seconds.
The result will be one of the alternatives in
the following table Result after breath
test.
4. If no message is shown then the transmission to the car may have failed - in which
case, press button (3) to transmit the result
to the car manually.
5. Fold down the nozzle and refit the Alcolock
in its holder.
6. Start the engine following an approved
breath test within 5 minutes - otherwise it
must be repeated.
``
* Option/accessory, for more information, see Introduction.
97
03 Your driving environment
Alcoguard*
Result after breath test
03
Lamp (5) + Display text
Specification
Green lamp + Alcoguard Approved
test
Start the engine - no
alcohol content
measured.
Yellow lamp + Alcoguard Approved
test
Red lamp + Disapproved test Wait 1
minute
A
Engine starting possible - measured
alcohol content is
above 0.1 promille
but below the limit
value in forceA.
Engine starting not
possible - measured
alcohol content is
above the limit value
in forceA.
Limits vary between countries, so find out what limits apply.
See also the section entitled General information on the
Alcolock on page 97
NOTE
After a completed period of driving, the
engine can be restarted within 30 minutes
without a new breath test.
1
98
To bear in mind
Before the breath test
In order to obtain correct function and as accurate a measurement result as possible:
• Avoid eating or drinking approx.
5 minutes before the breath test.
• Avoid excess windscreen washing - the
alcohol in the washer fluid may result in an
incorrect measurement result.
Change of driver
In order to ensure that a new breath test is carried out in the event of a change of driver depress the switch (2) and the send button (3)
simultaneously for approx. 3 seconds. At
which point the car returns to start inhibition
mode and a new approved breath test is
required before starting the engine.
tion will then be possible, see page 99 section Emergency situation.
The message can be cleared by pressing the
send button (3) once. Otherwise it goes out on
its own after approx. 2 minutes but then reappears each time the engine is started - only
recalibration at a workshop1 can clear the message permanently.
Cold or hot weather
The colder the weather the longer it takes
before the Alcolock is ready for use:
Temperature (ºC)
Maximum heating time (seconds)
+10 — +85
10
–5 — +10
60
–40 — –5
180
Calibration and service
The Alcolock must be checked and calibrated
at a workshop1 every 12 months.
30 days before recalibration is necessary the
display shows Alcoguard Calibr. required. If
calibration is not carried out within these 30
days then normal engine starting will be
blocked - only starting with the Bypass func-
An authorised Volvo workshop is recommended.
* Option/accessory, for more information, see Introduction.
At temperatures below -20 ºC or above
+60 ºC the Alcolock requires additional power
supply. The display shows Alcoguard insert
power cable. In which case, connect the
power supply cable from the glovebox and wait
until indicator lamp (6) is green.
03 Your driving environment
Alcoguard*
In extremely cold weather the heating time can
be reduced by taking the Alcolock indoors.
Emergency situation
In the event of an emergency situation, or if the
Alcolock is out of order or has been removed,
it is possible to bypass the Alcolock in order to
drive the car.
NOTE
All Bypass activation is logged and saved in
memory, see page 10 in the section,
Recording data.
Activating the Bypass function
Symbols and display messages
• Depress and hold the left-hand stalk
In addition to the previously described messages, the combined instrument panel's display can also show the following:
switch READ button and the button for
hazard warning flashers simultaneously for
approx. 5 seconds - the display first shows
Bypass activated Wait 1 minute and
then Alcoguard Bypass enabled - after
which the engine can be started.
This function can be activated several times.
The error message shown during driving can
only be cleared at a workshop1.
Display text
Meaning/Action
Alcoguard Restart
possible
The engine has been
switched off for less
than 30 minutes engine starting possible without new
test.
Alcoguard Service
required
Contact a workshop1.
Alcoguard No signal
Transmission failed send manually with
button (3) or take a
new breath test.
Alcoguard Invalid
test
Test failed - take a
new breath test.
Alcoguard Blow
longer
Blowing too short blow for longer.
Alcoguard Blow
softer
Blowing too hard blow more gently.
Activating the Emergency function
• Depress and hold the left-hand stalk
After the Bypass function has been activated
the display shows Alcoguard Bypass
enabled the whole time while driving and can
only be reset by a workshop1.
The Bypass function can be tested without the
error message being logged - in which case,
carry out all the steps without starting the car.
The error message is cleared when the car is
locked.
When the Alcolock is installed, either the
Bypass or Emergency function is selected as
the bypassing option. This setting can be
changed afterwards at a workshop1.
1
switch READ button and the button for
hazard warning flashers simultaneously for
approx. 5 seconds - the display shows
Alcoguard Bypass enabled and the
engine can be started.
This function can be used once, after which a
reset must be made at a workshop1.
03
An authorised Volvo workshop is recommended.
``
* Option/accessory, for more information, see Introduction.
99
03 Your driving environment
Alcoguard*
03
100
Display text
Meaning/Action
Alcoguard Blow
harder
Blowing too weak blow harder.
Alcoguard wait
Preheating
Heating not finished
- wait for text Alcoguard Blow 5 seconds.
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Starting the engine
2. Hold the clutch pedal fully depressed1. (For
cars with automatic gearbox - Depress the
brake pedal.)
Petrol and diesel engines
3. Press the START/STOP ENGINE button
and then release it.
G021126
NOTE
Ignition switch with inserted remote control key
and START/STOP ENGINE button.
IMPORTANT
Do not press in the remote control key incorrectly turned - Hold the end with the detachable key blade, see page 43.
1. Fit the remote control key in the ignition
switch - Gently press the key until it is
drawn into the lock. Note that if the car is
equipped with an alcolock then a breath
test must first be approved before the
engine can be started, see page 97.
For diesel-engined cars, there may be a
slight delay before the engine can be started
- Engine Preheating is displayed in the
meantime.
The starter motor works until the engine has
started, but for no longer than 10 seconds (diesel up to 60 seconds).
If the engine has not started - try again by holding in the START/STOP ENGINE button until
the engine starts.
WARNING
NOTE
The idling speed can be noticeably higher
than normal for certain engine types during
cold starting. This is so that the emissions
system can reach normal operating temperature as quickly as possible, which minimises exhaust emissions and protects the
environment.
03
Keyless drive
Follow steps 2–3 for starting petrol and diesel
engines. For more information on Keyless
drive, see page 48.
NOTE
One precondition for starting the car is that
one of the car's remote control keys with the
keyless drive* function is located inside the
passenger compartment or the cargo area.
WARNING
Always remove the remote control key from
the ignition switch when leaving the car especially if there are children in the car. For
information on how the key is removed from
the ignition switch, see page 69.
Never remove the remote control key with
the Keyless drive* function from the car
while driving or during towing.
Stop the engine
To switch off the engine - Press START/STOP
ENGINE.
1
If the car is moving then it is enough to press the START/STOP ENGINE button to start the car.
``
* Option/accessory, for more information, see Introduction.
101
03 Your driving environment
Starting the engine
If the car has an automatic gearbox and the
gear selector is not in a position P or if the car
is moving - Press twice or hold the button
depressed until the engine stops.
Steering lock
03
The steering lock opens when the START/
STOP ENGINE button is depressed after the
remote control key has been pressed into the
ignition switch.
The steering lock is activated when the driver's
door is opened after the engine has been
switched off.
Key positions
For information on the remote control key's different key positions, see page 69
102
03 Your driving environment
Starting the engine – Flexifuel
General information about starting
with Flexifuel
Engine block heater*
this reason you should aim to use the engine
block heater throughout the winter months.
The engine is started in the same way as in a
petrol-engined car.
WARNING
The engine block heater is powered by high
voltage. Fault tracing and repair of an electric engine block heater and its electrical
connections must only be carried out by a
workshop - an authorised Volvo workshop
is recommended.
In the event of starting difficulties
If the engine does not start at the first start
attempt:
• Make further attempts to start with the
03
START/STOP ENGINE button.
NOTE
If the engine still does not start
The outside temperature is lower than +5 °C:
1. Connect the engine block heater for at
least 1 hour.
2. Make further attempts to start with the
START/STOP ENGINE button.
IMPORTANT
If the engine does not start despite repeated
start attempts, you are recommended to
contact an authorised Volvo workshop.
Points to remember for carrying reserve
fuel:
•
Electrical input to the engine block heater.
When the temperature is expected to be lower
than –10 °C and the car has been refuelled with
bioethanol E85, an engine block heater should
be used for about 2 hours to facilitate the quick
starting of the engine.
The lower the temperature, the longer the time
required with the engine block heater. At
-20 °C the heater should be used for approx. 3
hours.
In the event of stalling due to an empty
fuel tank, bioethanol E85 from a reserve
fuel can may make the engine difficult
to start in extreme cold. This is avoided
by filling the reserve fuel can with 95
octane petrol.
For more information on Flexifuel's bioethanol
E 85 fuel, see page 219 and 299.
Cars intended for E85 have an electric engine
block heater*. Starting and driving with a preheated engine involves significantly lower
emissions and reduced fuel consumption. For
``
* Option/accessory, for more information, see Introduction.
103
03 Your driving environment
Starting the engine – Flexifuel
Fuel adaptation
03
If the fuel tank is filled with petrol after the car
has been driven on bioethanol E85 (or vice
versa) then the engine may run slightly
unevenly for a time. For this reason it is important to allow the engine to accustom itself
(adapt) to the new fuel mixture.
Adaptation takes place automatically when the
car is driven for a short period at an even
speed.
IMPORTANT
After the fuel mixture in the tank has been
changed an adaptation should be made by
driving at an even speed for about 15
minutes.
If the battery has been discharged or disconnected then a slightly longer period of driving
is required for the adaptation as the memory
for the electronics has been cleared.
104
03 Your driving environment
Starting the engine – external battery
Jump starting
5. Open the clips on the front cover of the
battery in your car and remove the cover,
see page 269.
6. Connect the red jump lead to the battery's
positive terminal
.
7. Connect one end of the black jump lead to
.
the donor battery's negative terminal
IMPORTANT
Connect the start cable carefully to avoid
short circuits with other components in the
engine compartment.
If the battery is flat then the car can be started
with current from another battery.
The following points are recommended when
using a donor battery in order to avoid the risk
of an explosion:
1. Insert the remote control key in key position 0, see page 69.
2. Ensure that the donor battery is 12 volt.
3. If the donor battery is in another car, switch
off the donor car's engine in the other car
and ensure that the cars do not touch one
another.
4. Connect the red jump lead to the positive
.
terminal on the donor battery
8. Connect the other clamp to an earthing
point, (right-hand engine mounting at the
top, the outer screw head)
. Check that
the jump lead clamps are fixed securely so
that there are no sparks during the starting
procedure.
11. Remove the jump leads, first the black and
then the red.
Make sure that none of the clamps on the
black jump lead comes into contact with
the battery's positive terminal or the clamp
connected to the red jump lead.
03
WARNING
The battery can generate oxyhydrogen gas,
which is highly explosive. One spark, which
can be generated if you connect a jump lead
incorrectly, is sufficient to make the battery
explode. The battery contains sulphuric
acid, which can cause serious burns. If the
acid comes into contact with eyes, skin or
clothing, flush with large quantities of water.
If acid splashes into the eyes, seek medical
attention immediately.
9. Start the engine of the "donor car". Let the
engine run a few minutes at a speed slightly
higher than idle (1500 rpm).
10. Start the engine of the car with the flat battery. Do not touch the crocodile clips during the start procedure. There is a risk of
sparks forming.
105
03 Your driving environment
Gearboxes
Manual gearbox
Look at the actual gearshift pattern imprinted
on the gear lever.
Automatic gearbox, Geartronic*
• Depress the clutch pedal fully during each
gear change.
• Take your foot off the clutch pedal between
gear changes.
03
Reverse gear inhibitor
G021350
The reverse gear inhibitor hinders the possibility of mistakenly attempting to engage reverse
gear during normal forward travel.
• Start from neutral position N and only
engage reverse gear R when the car is stationary.
Gearshift pattern 5-speed gearbox.
NOTE
With the upper variant of the shifting pattern
for 6-speed gearbox (see previous illustration) - first press down the gear lever in the
N position in order to engage reverse gear.
D: Automatic gear positions. M (+/–): Manual gear
positions.
The information display shows the position of
the gear selector using the following indications: P, R, N, D, S, 1, 2, 3, 4 5 or 6, see
page 63.
Gear positions
Parking position (P)
Select P when starting the engine or when the
car is parked. The brake pedal must be
depressed to disengage the gear selector from
the P position.
Gearshift pattern 6-speed gearbox.
The 6-speed box is available in two versions reverse gear position differs between them.
106
* Option/accessory, for more information, see Introduction.
The gearbox is mechanically blocked when the
P position is engaged. Activate the electric
parking brake by pressing the button, see
page 115.
03 Your driving environment
Gearboxes
IMPORTANT
The car must be stationary when position
P is selected.
6, which is equivalent to the gear that is
engaged just then, see page 63.
• Move the lever forwards towards + (plus)
to change up a gear and release the lever,
which returns to its rest position between
+ and –.
Reverse (R)
The car must be stationary when position R is
selected.
or
Neutral position (N)
• Pull the lever back towards – (minus) to
No gear is engaged and the engine can be
started. Apply the parking brake if the car is
stationary with the gear selector in position N.
The manual gearshift mode (+/–) can be
selected at any time while driving.
Drive (D)
D is the normal driving position. Shifting up and
down takes place automatically based on the
level of acceleration and speed. The car must
be stationary when the gear selector is moved
to position D from position R.
change down a gear and release it.
Geartronic automatically shifts down if the
driver allows the speed to decrease lower than
a level suitable for the selected gear, in order
to avoid jerking and stalling.
To return to automatic driving mode:
• Move the lever to the side to the end posi-
Geartronic – Manual gear positions (+/-)
tion at D.
The driver can also change gear manually
using the Geartronic automatic gearbox. The
car engine-brakes when the accelerator pedal
is released.
NOTE
Manual gearshift mode is obtained by moving
the lever to the side from position D to the end
position at +/–. The information display shifts
the indication from D to one of the figures 1 –
1
f the gearbox has a Sport programme then
the gearbox will only become manual after
the lever has been moved forwards or backwards in its (-+/–) position. The information
display then shifts the indication from S to
show which of the gears 1-6 is engaged.
Geartronic - Sport mode (S)1
The Sport programme provides sportier characteristics and allows higher engine speed for
the gears. At the same time it responds more
quickly to acceleration. During active driving,
the use of a lower gear is prioritised, leading to
a delayed upshift.
03
Sport mode is obtained by moving the lever to
the side from D position to the end position at
+/–. The information display shifts the indication from D to S.
Sport mode can be selected at any time while
driving.
Geartronic - Winter mode
It can be easier to pull away on slippery roads
if 3rd gear is engaged manually.
1. Depress the brake pedal and move the
gear lever from the D position to the end
position at +/– - the instrument panel display shifts the indication from D to the figure 1.
2. Scroll up to gear 3 by pushing the lever
forward towards + (plus) twice - the display
shifts the indication from 1 to 3.
3. Release the brake and accelerate carefully.
Only models D5 and T6.
``
107
03 Your driving environment
Gearboxes
The gearbox "winter mode" means that the car
moves off with a lower engine speed and
reduced engine power on the drive wheels.
03
engine reaches its maximum speed in order to
prevent damage to the engine.
P position. The remote control key is locked in
all other positions.
Mechanical gear selector inhibitor
Parking position (P)
Kick-down
Stationary car with engine running:
When the accelerator pedal is pressed all the
way to the floor (beyond the position normally
regarded as full acceleration) a lower gear is
immediately engaged. This is known as kickdown.
Keep your foot on the brake pedal when moving the gear selector to another position.
Electric gear inhibitor – Shiftlock Parking
position (P)
To be able to move the gear selector from P to
other gear positions, the brake pedal must be
depressed and the remote control key must be
in position II, see page 69.
G021351
If the accelerator is released from the kickdown position, the gearbox automatically
changes up.
Kick-down is used when maximum acceleration is needed, such as for overtaking.
Safety function
To prevent overrevving the engine, the gearbox
control program has a protective downshift
inhibitor which prevents the kick-down function.
Geartronic does not permit downshifting/kickdown which would result in an engine speed
high enough to damage the engine. Nothing
happens if the driver still tries to shift down in
this way at high engine speed – the original
gear remains engaged.
When kick-down is activated the car can
change one or more gears at a time depending
on engine speed. The car changes up when the
108
The gear selector can be moved forward and
back freely between N and D. Other positions
are locked with a latch that is released with the
inhibitor button on the gear selector.
With the inhibitor button depressed the lever
can be moved forwards or backwards between
P, R, N and D.
Automatic gear selector inhibitor
The automatic gearbox has special safety systems:
Keylock
To remove the remote control key from the
ignition switch, the gear selector must be in the
Shiftlock – Neutral (N)
If the gear selector is in the N position and the
car has been stationary for at least 3 seconds
(irrespective of whether the engine is running)
then the gear selector is locked.
To be able to move the gear selector from N to
other gear positions, the brake pedal must be
depressed and the remote control key must be
in position II, see page 69.
03 Your driving environment
Gearboxes
Deactivating the automatic gear selector
inhibitor
Automatic gearbox, Powershift*2
several seconds while the foot is moved from
the brake pedal to the accelerator pedal before
setting off or reversing uphill.
The temporary braking effect releases after
several seconds or when the driver accelerates.
03
G021350
To bear in mind
If the car cannot be driven, e.g. due to a flat
battery, the gear selector must be moved from
the P position so that the car can be moved.
Lift the rubber mat in the compartment
behind the centre console and open the
hatch.
Fully insert the key blade. Press the key
blade down and hold (For information on
the key blade, see page 43.)
Move the gear selector from the P position.
D: Automatic gear positions. M (+/–): Manual gear
positions.
Powershift is a six-stage automatic gearbox
that has double mechanical clutch discs in
contrast to a conventional automatic gearbox.
A conventional automatic gearbox has a
hydraulic torque converter that transfers power
from the engine to the gearbox.
Powershift transmission operates in the same
way and has similar controls and functions as
the Geartronic automatic transmission, described in the previous section.
HSA
The HSA (Hill Start Assist) function means that
the pressure in the brake system remains for
2
The transmission's double clutch has overload
protection that is activated if it becomes too
hot, e.g. if the car is held stationary with the
accelerator pedal on an uphill gradient for a
long time.
Overheated transmission causes the car to
shake and vibrate, and the warning symbol illuminates and the information display shows a
message. The transmission can also overheat
during slow driving in queues (10 km/h or
slower) on an uphill gradient, or with a trailer
hitched. The transmission cools down when
the car is stationary, with foot brake depressed
and the engine running at idling speed.
Overheating during slow driving in queues can
be avoided by driving in stages: Stop the car
and wait with your foot on the brake pedal until
there is a moderate distance to the traffic
ahead, drive forward a short distance, and then
Only 4-cyl. model 2.0, 2.0T, 2.0F.
``
* Option/accessory, for more information, see Introduction.
109
03 Your driving environment
Gearboxes
wait another moment with your foot on the
brake pedal.
IMPORTANT
In some situations the display may show a
message at the same time as a symbol is illuminated.
Use the foot brake to hold the car stationary
on an uphill gradient - do not hold the car
with the accelerator pedal. The gearbox
could then overheat.
03
Symbol
A
Display
Driving characteristics
Action
Transm. overheat brake to hold
Difficulty in maintaining even speed at constant engine speed.
Transmission overheated. Keep the car
stationary using the foot brake.A
Transm. overheat park safely
Significant pulling in the car's traction.
Transmission overheated. Park the car
immediately in a safe manner.A
Transm. cooling let engine run
No drive due to overheated gearbox.
Transmission overheated. For fastest cooling: Run the engine at idling speed with the
gear lever in the N or P position until the
message clears.
For fastest cooling: run the engine at idling speed with the gear lever in the N or P position, until the message clears.
The table shows three steps with an increased
degree of seriousness should the transmission
become too hot. In parallel with the display text
the driver is also advised that the car's electronics are temporarily changing the driving
characteristics. Follow the instructions on the
information display where appropriate.
110
Text message and action
NOTE
The table's examples are no indication that
the car is defective but instead show that a
safety function has been activated intentionally to prevent damage to one of the
car's components.
WARNING
If a warning symbol combined with the text
Transm. overheat park safely is ignored
then the heat in the gearbox may become
so high that the power transmission
between engine and gearbox is temporarily
03 Your driving environment
Gearboxes
halted in order to prevent the clutch from
malfunctioning - the car then loses drive and
is stationary until gearbox temperature has
cooled to an acceptable level.
For more possible display messages with their
respective proposals for solutions concerning
automatic transmission, see page 128.
03
A display text clears automatically after the
action has been carried out or after one press
on the indicator stalk READ button.
111
03 Your driving environment
All-wheel drive – AWD*
All Wheel Drive is always available
03
All Wheel Drive means that the car is driving all
four wheels at the same time.
The power is automatically distributed
between the front and rear wheels. An electronically controlled clutch system distributes
the power to the wheels that have the best grip
on the current road surface. This provides the
best traction and prevents wheel spin. Under
normal driving conditions, the majority of
power is transmitted to the front wheels.
All Wheel Drive improves driving safety in rain,
snow and icy conditions.
112
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Foot brake
General
The car is equipped with two brake circuits. If
one brake circuit is damaged then this will
mean that the brakes engage at a deeper level
and harder pressure on the pedal is needed to
produce the normal braking effect.
The driver's brake pedal pressure is assisted
by a brake servo.
WARNING
The brake servo only works when the engine
is running.
If the brake is used when the engine is switched
off then the pedal will feel stiff and more force
must be used to brake the car.
In very hilly terrain or when driving with a heavy
load the brakes can be relieved by using engine
braking. Engine braking is most efficiently used
if the same gear is used downhill as up.
For more general information on heavy loads
on the car, see page 295.
Anti-lock braking system
The car is equipped with ABS (Anti-lock
Braking System) which prevents the wheels
from locking during braking. This means the
ability to steer is maintained and it is easier to
swerve to avoid a hazard for example. Vibration
may be felt in the brake pedal when this is
engaged and this is normal.
A short test of the ABS system is made automatically after the engine has been started
when the driver releases the brake pedal. A
further automatic test of the ABS system may
be made when the car reaches 10 km/h. The
test may be experienced as pulses in the brake
pedal.
Cleaning the brake discs
Coatings of dirt and water on the brake discs
may result in delayed brake function. This delay
is minimised by cleaning the brake linings.
Manual cleaning is advisable with wet road surfaces, prior to long-stay parking and after the
car has been washed. Carry this out by braking
gently during a short period while en route.
03
Emergency Brake Assistance
Emergency brake lights and automatic
hazard warning flashers
Emergency brake lights are activated to alert
vehicles behind about sudden braking. The
function means that the brake light flashes
instead of - as in normal braking - shining with
a constant glow.
Emergency brake lights are activated at
speeds above 50 km/h if the ABS system is
working and/or in the event of sudden braking.
After the car's speed has been slowed below
10 km/h the brake light returns from flashing to
the normal constant glow - while at the same
time the hazard warning flashers are activated,
and they flash until the driver changes engine
speed with the accelerator pedal or they are
deactivated with their button, see page 81.
Emergency Brake Assistance EBA (Emergency
Brake Assist) helps to increase brake force and
so reduce braking distance. EBA detects the
driver's braking style and increases brake force
as necessary. The brake force can be reinforced up to the level when the ABS system is
engaged. The EBA function is interrupted when
the pressure on the brake pedal is reduced.
NOTE
When EBA is activated the brake pedal lowers slightly more than usual, depress (hold)
the brake pedal as long as necessary. If the
brake pedal is released then all braking
ceases.
``
113
03 Your driving environment
Foot brake
Symbols in the combined instrument
panel
Symbol
03
Specification
Constant glow – Check the
brake fluid level. If the level is
low, fill with brake fluid and
check for the cause of the brake
fluid loss.
Constant glow for 2 seconds
when the engine is started –
There was a fault in the brake
system's ABS function when
the engine was last running.
WARNING
If
and
illuminate at the same
time, there may be a fault in the brake system.
If the level in the brake fluid reservoir is normal at this stage, drive carefully to the nearest workshop and have the brake system
checked - an authorised Volvo workshop is
recommended.
If the brake fluid is under the MIN level in the
brake fluid reservoir, do not drive further
before topping up the brake fluid.
The reason for the loss of brake fluid must
be investigated.
114
03 Your driving environment
Parking brake
Parking brake, electric
Applying the parking brake
the accelerator pedal is depressed the braking
is interrupted.
Function
A faint electric motor noise can be heard when
the parking brake is being applied. The noise
can also be heard during the automatic function checking of the parking brake.
If the car is stationary when the parking brake
is applied then it only acts on the rear wheels.
If it is applied when the car is moving then the
normal foot brake is used, i.e. the brake acts
on all four wheels. Brake function changes over
to the rear wheels when the car is almost stationary.
NOTE
In the event of emergency braking at speeds
above 10 km/h a signal sounds during the
braking procedure.
03
Parking on a hill
If the car is parked facing uphill; turn the wheels
away from the kerb.
Parking brake control.
Low battery voltage
1. Press the foot brake pedal down firmly.
If the battery voltage is too low then the parking
brake can neither be released nor applied.
Connect a donor battery if the battery voltage
is too low, see page 105.
2. Press the control.
3. Release the foot brake pedal and make
sure that the car is at a standstill position.
• When parking the vehicle, always engage
1st gear (for manual gearbox) or put the
gear selector in position P (for automatic
gearbox).
If the car is parked facing downhill, turn the
wheels towards the kerb.
WARNING
Get into the habit of always applying the
parking brake when parking on a slope leaving the car in gear, or in P if it has automatic transmission, is not sufficient to hold
the car in all situation.
The symbol in the combined instrument panel flashes until the parking
brake is fully applied. When the symbol illuminates the parking brake is applied.
In an emergency the parking brake can be
applied when the vehicle is moving by depressing the control. When the control is released or
``
115
03 Your driving environment
Parking brake
Disengaging the parking brake
03
2. Ease up the clutch and depress the accelerator.
ing off. Release the control when the engine
achieves traction.
Cars with automatic gearbox
Cars with Keyless drive function
Releasing manually
1. Insert the remote control key in the ignition
switch.
Release manually by pressing the
START/STOP ENGINE button, then depress
the brake or clutch pedal and pull the control.
2. Depress the brake pedal firmly.
Symbols
3. Pull the control.
Releasing automatically
1. Put the seatbelt on.
Parking brake control.
2. Start the engine.
Cars with manual gearbox
3. Move the gear selector to position D or R
and depress the accelerator.
Releasing manually
1. Insert the remote control key in the ignition
switch.
2. Depress the brake pedal firmly.
3. Pull the control.
NOTE
The parking brake can also be released
manually by depressing the clutch pedal
instead of the brake pedal. Volvo recommends the use of the brake pedal.
Releasing automatically
1. Start the engine.
116
NOTE
For safety reasons, the parking brake is only
released automatically if the engine is running and the driver is wearing a seatbelt. The
parking brake is released immediately on
cars with automatic gearbox when the
accelerator pedal is depressed and the gear
selector is in position D or R.
Heavy load uphill
A heavy load, such as a trailer, can cause the
car to roll backward when the parking brake is
released automatically on a steep incline.
Avoid this by depressing the control while driv-
Symbol
Specification
Read the message on the information display
A flashing symbol indicates that
the parking brake is applied. If
the symbol flashes in any other
situation then this means that a
fault has arisen. Read the message on the information display.
03 Your driving environment
Parking brake
Messages
Parking brake Service required - A fault has
arisen. Visit a workshop if the fault persists - a
Volvo workshop is recommended.
If the car has to be parked before the fault has
been rectified then the wheels must be turned
as if parking on a hill and 1st gear engaged
(manual gearbox) or the gear selector must be
in position P (automatic gearbox).
03
Replacing the brake linings
Park brake not fully released - A fault is preventing the parking brake from being released.
Visit a workshop - an authorised Volvo workshop is recommended. A warning signal
sounds if you pull away with this error message.
The rear brake linings must be replaced at a
workshop due to the design of the electric
parking brake - an authorised Volvo workshop
is recommended.
Parking brake not applied - A fault is preventing the parking brake from being applied.
Try to apply and release. Visit a workshop if the
message remains - a Volvo workshop is recommended.
The message is also illuminated on cars with
manual gearbox when the car is driven at low
speed with the door open in order to alert the
driver that the parking brake may have been
unintentionally disengaged.
117
03 Your driving environment
HomeLinkŸ *
General
NOTE
HomeLinkŸ is designed not to work if the car
is locked from the outside.
Save the original remote controls for future
programming (e.g. when switching to
another car).
03
Delete the button programming when the
car is to be sold.
Metallic sun visors should not be used in
cars fitted with HomeLinkŸ. This may have
an adverse effect on its function.
HomeLinkŸ is a programmable remote control
which can control up to three different devices
(e.g. garage door, alarm system, outdoor lighting and indoor lighting etc.) and in doing so
replace their remote controls. HomeLinkŸ is
supplied built into the left-hand sun visor.
The HomeLinkŸ panel consists of three programmable buttons and one indicator lamp.
Operation
When HomeLinkŸ is fully programmed it can be
used in place of the separate original remote
controls.
Depress the programmed button to activate
the garage door, alarm system etc. The indicator lamp illuminates for the time that the button is kept depressed.
NOTE
If the ignition is not activated, HomeLinkŸ
will work for 30 minutes after the driver's
door has been opened.
The original remote controls can of course be
used in parallel with HomeLinkŸ.
118
* Option/accessory, for more information, see Introduction.
WARNING
If HomeLinkŸ is used to operate a garage
door or gate, ensure that nobody is in the
vicinity of the door or gate while it is in
motion.
Do not use the HomeLinkŸ remote control
for any garage door that does not have
safety stop and safety reverse. The garage
door must react immediately when it
detects that something is preventing its
movement, and stop directly and reverse. A
garage door without these characteristics
could cause personal injury. For further
information - contact the supplier via the
Internet: www.homelink.com.
Programming for the first time
The first step erases the memory in
HomeLinkŸ and must not be carried out when
only one individual button is being reprogrammed.
1. Depress the two outer buttons and do not
release until the indicator lamp starts to
flash after approx. 20 seconds. The flashing indicates that HomeLinkŸ is set in
"learn mode" and is ready to be programmed.
2. Position the original remote control
5-30 cm from HomeLinkŸ. Monitor the indicator lamp.
03 Your driving environment
HomeLinkŸ *
The particular distance that is required
between the original remote control and
HomeLinkŸ depends on the programming
of the device in question. Perhaps several
attempts will be required at different distances. Maintain each position for approx.
15 seconds before trying a new one.
ess is repeated for approx. 20 seconds
and indicates that the device has a "rolling code". The garage door, gate or similar is not activated when the programmed HomeLinkŸ button is
depressed. Continue the programming
in accordance with the following.
3. Depress the button for the original remote
control and the button to be programmed
on HomeLinkŸ simultaneously. Do not
release the buttons until the indicator lamp
has changed over from slow to rapid flashing. The rapid flashing indicates successful
programming.
5. Locate the "programming button1" on the
receiver for the garage door for example,
normally located close to the antenna's
bracket on the receiver. If you have difficulty in finding the button - consult the
supplier's manual, or contact the supplier
via the Internet: www.homelink.com.
4. Test the programming by depressing the
programmed button on HomeLinkŸ and
watching the indicator lamp:
6. Depress and release the "programming
button". The button flashes for
approx. 30 seconds and the next step must
be carried out within this period.
• Constant glow: The indicator lamp illuminates with a constant glow when the
button is kept depressed, this indicates
that the programming is complete. The
garage door, gate or similar should now
be activated when the programmed
HomeLinkŸ button is depressed.
• Glow not constant: The indicator lamp
flashes quickly for approx. 2 seconds
and then changes over to a constant
glow for approx. 3 seconds. This proc-
1
7. Depress the programmed button on
HomeLinkŸ, while the "programming button" is still flashing, keep it depressed for
approx. 3 seconds and then release.
Repeat the press/hold/release sequence
up to 3 times to conclude the programming.
Programming individual buttons
To reprogram an individual button, proceed in
accordance with the following:
1. Depress the required button on
HomeLinkŸ and do not release until step 3
has been completed.
03
2. When the indicator lamp on HomeLinkŸ
starts to flash, after approx. 20 seconds,
position the original remote control
5-30 cm from HomeLinkŸ. Monitor the indicator lamp.
The particular distance that is required
between the original remote control and
HomeLink depends on the programming of
the device in question. Perhaps several
attempts will be required at different distances. Maintain each position for approx.
15 seconds before trying a new one.
3. Depress the button on the original remote
control. The indicator lamp will start to
flash. When the flashing has changed over
from a slow to a rapid flashing - release
both buttons. The rapid flashing indicates
successful programming.
4. Test the programming by depressing the
programmed button on HomeLink and
watching the indicator lamp:
Button designation and colour vary depending on manufacturer.
``
* Option/accessory, for more information, see Introduction.
119
03 Your driving environment
HomeLinkŸ *
• Constant glow: The indicator lamp illuminates with a constant glow when the
button is kept depressed, this indicates
that the programming is complete. The
garage door, gate or similar should now
be activated when the programmed
HomeLinkŸ button is depressed.
03
• Glow not constant: The indicator lamp
flashes quickly for approx. 2 seconds
and then changes over to a constant
glow for approx. 3 seconds. This process is repeated for approx. 20 seconds
and indicates that the device has a "rolling code". The garage door, gate or similar is not activated when the programmed HomeLinkŸ button is
depressed. Continue the programming
in accordance with the following.
7. Depress the programmed button on
HomeLinkŸ, while the "programming button" is still flashing, keep it depressed for
approx. 3 seconds and then release.
Repeat the press/hold/release sequence
up to 3 times to conclude the programming.
Erasing programming
It is only possible to erase the programming for
all the buttons on HomeLinkŸ, not for individual
buttons.
5. Locate the "programming button2" on the
receiver for the garage door for example,
normally located close to the antenna's
bracket on the receiver. If you have difficulty in finding the button - consult the
supplier's manual, or contact the supplier
via the Internet: www.homelink.com.
6. Depress and release the "programming
button". The button flashes for approx. 30
seconds and the next step must be carried
out within this period.
2
120
Button designation and colour vary depending on manufacturer.
* Option/accessory, for more information, see Introduction.
Depress the two outer buttons and do not
release until the indicator lamp starts to
flash after approx. 20 seconds.
> HomeLinkŸ is now set in so-called
"learn mode" and is ready to be programmed once more, see page 118.
03 Your driving environment
03
121
Menus and messages...........................................................................
Climate control......................................................................................
Fuel-driven engine block heater
and passenger compartment heater*...................................................
Additional heater*..................................................................................
Audio system........................................................................................
RSE - Rear Seat Entertainment system - Dual Screen* .......................
Trip computer........................................................................................
DSTC – Stability and traction control system.......................................
Adapting driving characteristics...........................................................
Cruise control*......................................................................................
Adaptive cruise control*........................................................................
Distance Alert*......................................................................................
Collision Warning & Pedestrian Detection with Auto Brake*................
Driver Alert System – DAC*...................................................................
Driver Alert System - LDW*...................................................................
Park assist syst*....................................................................................
BLIS* – Blind Spot Information System................................................
Comfort inside the passenger compartment........................................
Comfort inside the passenger compartment - Executive.....................
Bluetooth handsfree*............................................................................
Built-in phone*......................................................................................
122
* Option/accessory, for more information, see Introduction.
124
130
138
141
142
155
160
162
164
165
167
175
178
185
188
191
194
198
202
203
208
COMFORT AND DRIVING PLEASURE
04 Comfort and driving pleasure
Menus and messages
Operation
MENU – leads to the menu system
Search paths
Some of the car's functions do not have separate function keys, but instead can be
adjusted/activated/deactivated via a menu
system.
EXIT – leads back one step in the menu
structure. A long press leads out from the
menu system.
Current menu level is shown at the top right of
the centre console display. Search paths to the
menu system functions are described in this
manual in the following form:
Navigation in the menus is carried out using
some of the centre console buttons or with the
steering wheel's right-hand keypad.
04
ENTER – selects menu options
Car settings
Lock settings
Steering wheel keypad*
The following is an example of how a function
can be accessed and adjusted using the centre
console buttons:
Many functions are standard, some are
optional. The range varies depending on market.
1. Press MENU.
Centre console controls
2. Scroll to the desired menu, e.g. Car
settings, with the navigation buttons and
then press ENTER - a submenu opens.
3. Scroll to Lock settings and press
ENTER - a new submenu opens.
ENTER
EXIT
Navigation buttons – up/down.
Centre console with information display and controls for menus.
Numerical keypad 1–9
If the steering wheel keypad has ENTER and
EXIT then these buttons, and the navigation
buttons, have the same functions as the controls in the centre console.
Navigation button – scrolls and selects
among menu options
124
* Option/accessory, for more information, see Introduction.
4. Scroll to Doors unlock and press
ENTER - a submenu of selectable functions opens.
5. Choose between the options and press
ENTER - a cross is marked in the option's
empty box.
6. Exit the programming by backing out of the
menus incrementally with short presses on
EXIT or with one long press.
The navigation buttons can be used instead of
ENTER and EXIT when navigating in the menu
04 Comfort and driving pleasure
Menus and messages
hierarchy. The right-hand arrow is equal to
ENTER and the left-hand arrow to EXIT.
The menu options are numbered and can also
be selected directly with the numerical keypad
(only 1–9).
Menu overview
The phone and audio sources each have separate main menus. An audio source main menu
(e.g. CD) can only be accessed when that particular audio source is active, see page 143.
Collision warning settings*
Parking camera settings*
Lane departure warning*
Reset all audio settings
Main menu FM
FM settings
Steering force level*
News
Unit settings
TP (Traffic information)
Driver Alert on
Radio text
PTY (Program type)
Climate settings
Automatic blower adjust
Advanced radio settings
Recirculation timer
Auto. rear defroster
Main menu DAB*3
Car Key memory
Seat heating time limit.
Main menu CD
Seat & mirror positions*
Car settings
Information
Light settings
1
2
3
4
5
Seat heating off during starting
Reset climate settings
Main menu AM
Audio settings
04
Audio settings2
The following menu options are included in
Main menu:
Random
Off
Folder4
Disc4
Lock settings
Sound stage
Single disc5
Reduced guard1
Equalizer front
All discs5
Tyre pressure*
Equalizer rear
Side mirror settings*
Auto. volume control
CD settings
Track information*
Available in certain models.
For submenus, see "Main menu AM/Audio settings".
See page 152.
Only in systems that allow the playback of MP3 and WMA format audio files.
Only in systems with CD changer.
``
* Option/accessory, for more information, see Introduction.
125
04 Comfort and driving pleasure
Menus and messages
News
Main menu, Bluetooth6
TP (Traffic information)
Audio settings2
Main menu AUX
AUX input volume
Audio
settings2
Main menu USB
04
USB settings
Track information
Audio
Last 10 missed calls
Last 10 received calls
Last 10 dialled calls
Phone book
Search
Copy fr. mobile phone
Bluetooth*
News
Change phone7
TP (Traffic information)
Connect phone8
settings2
Main menu iPod
iPod settings
News
TP (Traffic information)
Audio settings2
Track information
2 For submenus, see "Main menu AM/Audio settings".
6 Applies to cars that do not have built-in phone.
7 Only shown if a phone is connected.
8 Only shown if no phone is connected.
9 Applies to cars with built-in phone and BluetoothTM handsfree.
10 Only shown if no phone is connected.
126
Call register
* Option/accessory, for more information, see Introduction.
Remove phone
Phone settings
Sounds and volume
Synchronise phone book
Main menu, Bluetooth9
Call register
Last 10 missed calls
Last 10 received calls
Last 10 dialled calls
Phone book
Search
Copy fr. mobile phone
Bluetooth*
Connect fr. mobile phone
Connect phone10
Bluetooth info. for the car
Remove phone
Call options
Automatic answer
Voice mail number
Connect fr. mobile phone
Bluetooth info. for the car
Call options
Automatic answer
04 Comfort and driving pleasure
Menus and messages
Voice mail number
Change phone
Car phone
Add phone
Added phones11
Phone settings
Sounds and volume
Synchronise phone book
Main menu, built-in phone
Erase SIM
Phone settings
Erase phone
Network selection
Memory status
SIM security
Messages
Edit PIN code
Read
Sounds and volume
Write new
IDIS
Delete all messages
Reset Phone settings
Message settings
04
Call options
Send my number
Call register
Last 10 missed calls
Call waiting
Last 10 received calls
Automatic answer
Last 10 dialled calls
Auto redial
Erase list
Voice mail number
Call duration
Diversions
Change phone9
Phone book
Search
Car phone
New contact
Add phone
Copy all
Added phones11
Speed-dial
11 A maximum of 5 phones.
9 Applies to cars with built-in
phone and BluetoothTM handsfree.
``
127
04 Comfort and driving pleasure
Menus and messages
Combined instrument panel
be acknowledged with READ for the menus to
be shown.
Driver Alert*
Menu overview
Message
Some of the following menu options require the
function and hardware to be installed in the car.
To empty fuel tank
Average
Instantaneous
Average speed
04
DSTC
Information display and controls for menus.
READ – access to message list and message confirmation.
Thumbwheel – browse between menu
options.
RESET – reset the active function. Used in
certain cases to select/activate a function,
see the explanation under each respective
function.
The menus shown on the information displays
in the combined instrument panel are controlled with the left-hand stalk switch. The
menus shown depend on key position, see
page 69. If a message appears then this must
12 Only certain
13 Can only be
128
Current speed12
Tyre pressure Calibration*
Park heat timer 1/213*
Text message in the information display.
Park vent timer 1/2*
When a warning, information or indicator symbol illuminates, a corresponding message
appears on the information display. An error
message is stored in a memory list until the
fault is rectified.
Park timer mode*
Direct start Park heat*
Direct start Park el.heat*
Direct start Park vent*
Additional heat auto*
Rest heat start*
Lane departure warning*
markets.
set when the engine is switched off.
* Option/accessory, for more information, see Introduction.
Press READ to acknowledge and browse
between the messages.
04 Comfort and driving pleasure
Menus and messages
NOTE
If a warning message appears while you are
using the trip computer, the message must
be read (press READ) before the previous
activity can be resumed.
Message
Specification
Stop safelyA
Stop and switch off the
engine. Serious risk of
damage - consult a
workshopB.
Stop engineA
Stop and switch off the
engine. Serious risk of
damage - consult a
workshopB.
Service urgentA
Contact a workshopB to
check the car immediately.
Service
requiredA
Contact a workshopB to
check the car as soon
as possible.
See manualA
Read the owner's manual.
Book time for
maintenance
Time to book regular
service - contact a
workshopB.
Message
Specification
Message
Specification
Time for regular
maintenance
Time for regular service
- contact a workshopB.
The timing is determined by the number of
kilometres driven, number of months since the
last service, engine running time and oil grade.
Transmission
hot Reduce
speed
Drive more smoothly or
stop the car in a safe
manner. Disengage the
gear and run the engine
at idling speed until the
message clearsC.
Transmission
hot Stop safely
Critical fault. Stop the
car immediately in a
safe manner and contact a workshopB.
Maintenance
overdue
If the service intervals
are not followed then
the warranty does not
cover any damaged
parts - contact a workshopB.
Transmission
oil Change needed
Contact a workshopB to
check the car as soon
as possible.
Transmission
performance
low
The gearbox cannot
handle full capacity.
Drive carefully until the
message clearsC.
If shown repeatedly contact a workshopB.
A
B
C
Temporarily
OFFA
A function has been
temporarily switched
off and is reset automatically while driving
or after starting again.
Low battery
Power save
mode
The audio system is
switched off to save
energy. Charge the battery.
04
Part of message, shown together with information on where
the problem has arisen.
An authorised Volvo workshop is recommended.
For more messages concerning automatic transmission, see
page 110.
129
04 Comfort and driving pleasure
Climate control
General
Air conditioning
The car is equipped with Electronic Climate
Control (ECC). The climate control system
cools or heats as well as dehumidifies the air in
the passenger compartment.
NOTE
04
The air conditioning system (AC) can be
switched off, but to ensure the best possible
climate comfort in the passenger compartment and to prevent the windows from misting, it should always be on.
Sensor location
of the dashboard.
• The temperature sensor for the passenger
compartment is located below the climate
control panel.
The system includes a sun sensor which
detects on which side the sun is shining into
the passenger compartment. This means that
the temperature can differ between the right
and left-hand air vents despite the controls
being set for the same temperature on both
sides.
130
NOTE
To avoid misting, do not block the vents furthest back on the parcel shelf with clothing
or other objects.
• The outside temperature sensor is located
on the door mirror.
• The humidity sensor* is located in the interior rearview mirror.
NOTE
Do not cover or block the sensors with
clothing or other objects.
Actual temperature
The temperature you select corresponds to the
physical experience with reference to factors
such as air speed, humidity and solar radiation
etc. in and around the car.
Vents in the parcel shelf
• The sun sensor is located on the top side
Temporary shut-off of the air
conditioning
When the engine requires full power, e.g. for full
acceleration or driving uphill with a trailer, the
air conditioning can be temporarily switched
off. There may then be a temporary increase in
temperature in the passenger compartment.
Condensation
Side windows and sunroof
To ensure that the air conditioning works optimally, the side windows, and sunroof if appropriate, should be closed.
In warm weather, condensation from the air
conditioning may drip under the car. This is
normal.
Ice and snow
Misting windows
Remove misting on the insides of the windows
by primarily using the defroster function.
Remove ice and snow from the climate control
system air intake (the grille between the bonnet
and the windscreen).
To reduce the risk of misting, keep the windows clean and use window cleaner.
Fault tracing and repair
* Option/accessory, for more information, see Introduction.
Engage a workshop that has authorisation for
the fault tracing and repair of the climate control system. Volvo recommends that you contact an authorised Volvo workshop.
04 Comfort and driving pleasure
Climate control
Refrigerant
Clean Zone Interior Package (CZIP)*
The climate control system contains the refrigerant R134a, see page 297. This refrigerant
contains no chlorine, which means that it is
harmless to the ozone layer. Engage a workshop that has authorisation for filling/changing
refrigerant to carry out the work. Volvo recommends that you contact an authorised Volvo
workshop.
This option keeps the passenger compartment
clear of allergy and asthma inducing substances. For more information on CZIP, see the
brochure included with the purchase of the car.
Total airing function
The function opens/closes all side windows
simultaneously and can be used for example to
quickly air the car during hot weather, see
page 51.
Passenger compartment filter
All air entering the car's passenger compartment is cleaned with a filter. This must be
replaced at regular intervals. Follow the Volvo
Service Programme for the recommended
replacement intervals. If the car is used in a
severely contaminated environment, it may be
necessary to replace the filter more often.
NOTE
There are different types of passenger compartment filter. Make sure that the correct
filter is fitted.
The following is included:
• An enhanced fan function that means that
the fan starts when the car is opened with
the remote control key. The fan fills the
passenger compartment with fresh air. The
function starts when required and is disengaged automatically after a time or when
one of the passenger compartment doors
is opened. The amount of time the fan runs
is reduced gradually due to reduced need
up until the car is 4 years old.
• The air quality system IAQS is a fully automatic system that cleans the air in the passenger compartment from contaminants
such as particles, hydrocarbons, nitrous
oxides and ground-level ozone.
Use of tested materials in the interior
equipment
The materials have been developed in order to
minimise the quantity of dust in the passenger
compartment and they contribute to making
the passenger compartment easier to keep
clean. The carpets in both the passenger compartment and the cargo area are removable
and easy to remove and clean. Use cleaning
agents and car care products recommended
by Volvo, see page 281.
04
Menu settings
It is possible to change the default settings for
three of the climate control system's functions
via the centre console, see page 124:
• Fan speed in automatic mode, see
page 134.
• Recirculation timer for passenger compartment air, see page 135.
• Automatic rear window defrosting, see
page 93.
NOTE
To keep the CZIP standard in cars with CZIP
the IAQS filter must be changed after
15 000 km or once per year depending on
whichever occurs first. However, up to
75 000 km over 5 years. In cars without CZIP
and where the customer does not want to
keep the CZIP standard the IAQS filter must
be changed at a regular service.
All climate control system functions are set to
original position with RESET via the display.
``
* Option/accessory, for more information, see Introduction.
131
04 Comfort and driving pleasure
Climate control
Air distribution
G021368
Air vents in the door pillars
G021366
04
Air vents in the dashboard
The incoming air is divided between
20 different vents in the passenger compartment.
Air distribution is fully automatic in AUTO
mode.
If necessary it can be controlled manually, see
page 137.
Closed
Closed
Open
Open
Lateral airflow
Lateral airflow
Vertical airflow
Vertical airflow
Aim the outer vents at the side windows to
remove misting.
Aim the vents at the windows to remove misting.
A certain air flow always comes from the vents
in order to maintain a good climate in the passenger compartment.
Aim the vents into the passenger compartment
to maintain a comfortable climate in the rear
seat.
NOTE
Remember that small children may be sensitive to air flows and draughts.
132
04 Comfort and driving pleasure
Climate control
Climate control
Max. defroster
Electronic climate control, ECC
Recirculation/Air quality system
• Comfort level III: press the button once for
maximum output – three lamps illuminate.
• Comfort level II: press the button twice for
lower output – two lamps illuminate.
Temperature control, left-hand side
• Comfort level I: press the button three
times for the lowest output – one lamp illuminates.
Operation
Ventilated front seats*
Ventilated front seats*, left-hand side
Fan
Heated front seats, left-hand side
Air distribution
Heated front seats, right-hand side
AUTO
Ventilated front seats*, right-hand side
Temperature control, right-hand side
AC ON/OFF – Air conditioning On/Off
Rear window and door mirror defrosters,
see page 93.
Ventilated front seats can only
be specified when ECC is
installed in the car. The ventilation system consists of fans
in the seats and backrests
that draw air through the seat
upholstery. The cooling effect
increases the cooler the passenger compartment air becomes.
The ventilation is regulated from the climate
control and takes seat temperature, solar radiation and outside temperature into consideration.
The ventilation can be used at the same time
as seat heating. For example, the function can
be used to dry damp from clothing.
The ventilation system can be activated when
the engine is running. There are three comfort
levels that produce different cooling and dehumidification outputs:
Press the button four times to switch off the
function – no lamps illuminate.
04
NOTE
The seat ventilation should be used carefully
by people sensitive to draughts. Comfort
level I is recommended for long-term use.
IMPORTANT
The seat ventilation cannot be started when
passenger compartment temperature is
below 5 °C. This is to avoid chilling anyone
sitting in the seat.
Fan
Turn the knob to increase or
decrease fan speed. If AUTO
is selected then fan speed is
regulated automatically. The
previously set fan speed is
disengaged.
``
* Option/accessory, for more information, see Introduction.
133
04 Comfort and driving pleasure
Climate control
NOTE
If the fan is fully disengaged the air conditioning is not engaged which may result in a
risk of misting windows.
Seat heating is switched off automatically after
a while. The function can be deactivated/activated in the menu under: Climate settings
Seat heating time limit.
Front seats
Press the button once for the
highest heat level – three
lamps illuminate.
Press the button twice for a
lower heat level – two lamps
illuminate.
Press the button three times for the lowest heat
level – one lamp illuminates.
Rear seats1
Not included if 2-stage booster cushion is selected.
* Option/accessory, for more information, see Introduction.
Auto
The function automatically
regulates temperature, air
conditioning, fan speed, recirculation, and air distribution.
If you select one or more manual functions, the
other functions continue to be controlled automatically. The air quality sensor is engaged and
all manual settings are switched off when
AUTO is pressed. The display shows AUTO
CLIMATE.
G021376
The heating is normally switched off at start up.
If the heating has been switched on then it is
switched off automatically when the engine is
switched off. Automatic start of heating can be
activated/deactivated in the menu under:
Climate settings Seat heating off during
starting
134
The figure consists of three
buttons. When the buttons
are pressed a lamp in front of
the respective part of the figure illuminates and shows
which air distribution is
selected, see page 137.
WARNING
The heated seat should not be used by people who find it difficult to perceive temperature increase because of sensory loss or for
any reason have difficulty in managing to
use the control of the heated seat. Otherwise, burn injuries may arise.
Press the button four times to switch off the
heat – no lamps illuminate.
1
Air distribution
For a description of the menu system, see
page 124.
Heated seats*
04
Heat control takes place in the same way as for
the front seat.
Fan speed in automatic mode can be set under
Climate settings Automatic blower
adjust. Select between Low, Normal or
High:
04 Comfort and driving pleasure
Climate control
• Low - Automatic fan control. Low airflow
is prioritised.
• Normal - Automatic fan control.
• High - Automatic fan control. A more
intense airflow is prioritised.
For a description of the menu system, see
page 124.
When the OFF lamp is on, the air conditioning
is always disengaged. Other functions are still
controlled automatically. When defroster is
selected, the air conditioning system is set for
maximum dehumidification.
Defroster
Used to quickly remove misting and ice from the windscreen and side windows. Air
flowing to the windows. The
light in the defroster button
illuminates when the function
is active.
Temperature control
The temperatures on the
driver and passenger sides
can be set independently.
When the car is started, the
most recent setting is
resumed.
NOTE
The following also takes place in order to provide maximum dehumidification in the passenger compartment:
• the air conditioning is automatically
Heating or cooling cannot be hastened by
selecting a higher/lower temperature than
the actual temperature required.
AC – Air conditioning on/off
The air conditioning is controlled automatically by the
system when the ON lamp is
on. This way, incoming air is
sufficiently cooled and dehumidified.
engaged
• recirculation and the air quality system are
automatically disengaged.
The air conditioning can be disengaged manually using the AC button. When the defroster
function is switched off the climate control system returns to the previous settings.
Recirculation/Air quality system
Recirculation
When recirculation is
engaged the right-hand
orange light in the button illuminates. The function is
selected to shut out bad air,
exhaust gases etc. from the
passenger compartment. The
air in the passenger compartment is recirculated, i.e. no outside air is taken into the car when
this function is activated.
04
NOTE
If the air in the car recirculates for too long,
there is a risk of misting on the insides of the
windows.
Timer
With the timer function activated the system
will exit manually activated recirculation mode
according to a time that depends on the outside temperature. This reduces the risk of ice,
misting and bad air. Activate/deactivate the
function under Climate settings
Recirculation timer. For a description of the
menu system, see page 124.
``
135
04 Comfort and driving pleasure
Climate control
NOTE
When Defroster is selected, recirculation is
always deactivated.
Activating recirculation/air quality
sensor
Switch between the three
functions by pressing the button repeatedly.
Air quality system*
04
136
The air quality system separates gases and particles to
reduce the levels of odours
and pollution in the passenger
compartment. If the outside
air is contaminated then the
air intake is closed and the air
is recirculated. When the AUTO button is
depressed the air quality sensor is always
engaged.
• The left-hand orange lamp illuminates – the
air quality sensor is disengaged. There is
no recirculation, only fresh air.
• The centre green lamp illuminates – recir-
* Option/accessory, for more information, see Introduction.
culation not engaged, providing it is not
required for cooling in hot weather.
• The right-hand orange lamp illuminates –
recirculation is engaged.
NOTE
The air quality sensor should always be
engaged in order to obtain the best air in the
passenger compartment.
Recirculation is limited in cold weather to
avoid misting.
If the insides of the windows start misting
up, disengage the air quality sensor, and the
defroster functions for the windscreen, the
side and the rear windows should also be
used to demist the windows.
04 Comfort and driving pleasure
Climate control
Air distribution table
Air distribution
Use
Air distribution
Use
Air to windows. Some air
flows from the air vents.
The air is not recirculated.
Air conditioning is always
engaged.
to remove ice and misting
quickly.
Air to the floor and windows. Some air flows
from the dashboard air
vents.
to ensure comfortable
conditions and good
demisting in cold or
humid weather.
Air to windscreen and
side windows. Some air
flows from the air vents.
to prevent misting and
icing in a cold and humid
climate, (not at too low fan
speed to enable this).
Air to floor and from dashboard air vents.
in sunny weather with
cool outside temperatures.
Airflow to windows and
from dashboard air vents.
to ensure good comfort in
warm, dry weather.
Air to floor. Some air flows
to the dashboard air vents
and windows.
to direct heat or cold to
the floor
Airflow to the head and
chest from the dashboard
air vents.
to ensure efficient cooling
in warm weather.
Airflow to windows, from
dashboard air vents and
to the floor.
to provide cooler air along
the floor or warmer air
higher up in cold weather
or hot, dry weather.
04
137
04 Comfort and driving pleasure
Fuel-driven engine block heater and passenger compartment heater*
Fuel-driven heater
Refuelling
If the battery has insufficient charge or the fuel
level is too low, the parking heater will be
switched off automatically and a message
appears on the information display. Acknowledge the message by pressing the indicator
stalk READ button once, see page 139.
General information about the parking
heater
The parking heater heats the engine and passenger compartment and can be started
directly or with the timer.
04
Two different times can be selected using the
timer. Here, time refers to the time when the car
is heated and ready. The car's electronic system calculates when heating should be started
based on the outside temperature.
The heater cannot start if the outside temperature exceeds 15 °C. At –5 °C or lower the
maximum running time of the parking heater is
50 minutes.
WARNING
The car must be outdoors when the parking
heater is used.
NOTE
When the parking heater is active there may
be smoke from the right-hand wheel housing, which is perfectly normal.
138
Battery and fuel
IMPORTANT
Repeated use of the parking heater combined with short journeys may discharge the
battery and impair starting.
Warning label on fuel filler flap.
WARNING
Fuel which spills out can be ignited. Switch
off the fuel-driven heater before starting to
refuel.
Check the information display to see that
the parking heater is switched off. When it
is running, the information display shows
Park heat ON.
Parking on a hill
If the car is parked on a steep hill, the front of
the car should point downhill to ensure that
there is a supply of fuel to the parking heater.
* Option/accessory, for more information, see Introduction.
The car should be driven for the same time
as the heater is used to ensure that the car's
battery is recharged adequately to replace
the energy consumed by the heater when it
is used on a regular basis.
04 Comfort and driving pleasure
Fuel-driven engine block heater and passenger compartment heater*
NOTE
Symbol
- Figure 2 in the symbol means the
second climate control system in the car,
where the normal climate control system is
the first. The figure 2 has nothing to do with
TIMER 1 or TIMER 2.
Thumbwheel
G025102
READ button
For more information on the information display and READ, see page 128.
Symbols and display messages
When one of the timer's settings or
Direct start is activated, the information symbol in the combined instrument
panel illuminates while the information display
shows an explanatory text and a further illuminated symbol. The table shows symbols and
display texts that appear.
G025102
RESET - resets/selects
Specification
Fuel
heater
ON
The heater is
switched on and
running.
Timer is
set for
Fuel
heater
The heater's timer
is activated after
the remote control
key has been
removed from the
ignition switch and
leaving the car the engine and
passenger compartment are
heated at the set
time.
G025102
Display
G025102
Symbol
G025102
G025102
Operation
Display
Specification
Heater
stopped
Low battery
The heater has
been stopped by
the car's electronics in order to facilitate starting the
engine.
Heater
unavail.
Low fuel
level
Setting the heater
is not possible due
to fuel level being
too low
(approx. 7 litres) this is in order to
facilitate starting
the engine as well
as approx. 50 km
driving.
Park
heater
Service
required
Heater not working. Contact a
workshop for
repair. Volvo recommends that you
contact an authorised Volvo workshop.
04
``
* Option/accessory, for more information, see Introduction.
139
04 Comfort and driving pleasure
Fuel-driven engine block heater and passenger compartment heater*
A display text clears automatically after a time
or after one press on the indicator stalk
READ button.
Direct start and immediate stop
1. Scroll with the thumbwheel to Direct start
Park heat.
2. Press RESET to select between ON and
OFF.
04
ON: Parking heater switched on manually or
with programmed timer.
Setting the timer
The time when the car shall be used and heated
is specified with the timer.
Select between TIMER 1 and TIMER 2.
NOTE
The timer can only be programmed when
the remote control key is in key position I,
see page 69 - programming must therefore
be carried out before starting the engine.
OFF: Parking heater switched off.
1. Scroll with the thumbwheel to Park heat
timer 1.
Following the direct start of the heater it will be
activated for 50 minutes.
2. Briefly press RESET to move to the flashing hours setting.
Heating of the passenger compartment will
begin as soon as the engine coolant has
reached the correct temperature.
3. Select the required hour using the thumbwheel.
NOTE
The car can be started and driven while the
parking heater is running.
4. Briefly press RESET to move to the flashing minutes setting.
5. Select the required minute using the
thumbwheel.
6. Briefly press RESET to confirm the setting.
7. Press RESET to activate the timer.
After setting Park heat timer 1 a second start
time can be programmed with Park heat timer
2 by scrolling to it with the thumbwheel.
140
* Option/accessory, for more information, see Introduction.
Set the alternative time in the same way as
Park heat timer 1.
Deactivating a timer-started heater
A timer-started heater can be switched off
manually before the set time has elapsed. Proceed as follows:
1. Press READ.
2. Use the thumbwheel to scroll to the text
Park heat timer 1 or 2.
> The text ON flashes on the display.
3. Press RESET.
> The text OFF is shown with a constant
glow and the heater is switched OFF.
A timer-started heater can be switched off in
accordance with the instructions in the section
"Direct start and immediate stop", see
page 140.
Clock/timer
The heater's time is connected to the car's
clock.
NOTE
All timer programming will be cleared if the
car's clock is reset.
04 Comfort and driving pleasure
Additional heater*
General information about the
additional heater
Passenger compartment heater*
If the additional heater is supplemented with
timer function then it can be used as a fueldriven passenger compartment heater, see
page 138.
In cold climate zones1 an additional heater may
be required to obtain the correct operating
temperature in the engine and to obtain sufficient heating in the passenger compartment.
Electric additional heater
Cars with certain petrol engines2 have an electric additional heater integrated into the car's
climate control system.
Fuel-driven additional heater
A fuel-driven additional heater is fitted in cars
with diesel engines.
The heater starts automatically when extra
heat is required when the engine is running.
The heater is switched off automatically when
the correct temperature is reached or when the
engine is switched off.
NOTE
When the additional heater is active there
may be smoke from the right-hand wheel
housing which is perfectly normal.
Auto mode or shutdown
The additional heater can be switched off for
short distances if required.
1
2
In a semi-cold1 climate zone diesel-driven cars
have an electric additional heater instead of a
fuel-driven version.
READ button
Thumbwheel
RESET button
1. Scroll with the thumbwheel to Additional
heat auto.
2. Press RESET to select between ON and
OFF.
04
The heater cannot be controlled manually but
is instead activated automatically after the
engine has been started in outside temperatures below 14 °C and is switched off after the
set passenger compartment temperature has
been reached.
NOTE
The menu options are only visible in key
position I - any adjustments must therefore
be made before starting the engine.
An authorised Volvo dealer has information regarding the geographical areas concerned.
An authorised Volvo dealer has information regarding the engines concerned.
* Option/accessory, for more information, see Introduction.
141
04 Comfort and driving pleasure
Audio system
General
The audio system can be equipped with different options and is one of the following three
basic versions:
• Performance
• High Performance
• Premium Sound
If the audio system is active when the engine is
switched off then it is activated automatically
next time the engine is started.
Steering wheel keypad*
Overview
The system version is shown in the display
when the audio system is started.
04
Dolby Surround Pro Logic II and the Dolby
are trademarks of Dolby
symbol
Laboratories Licensing Corporation. Dolby
Surround Pro Logic II System is manufactured
under license from Dolby Laboratories
Licensing Corporation.
Remote control key and key positions
The audio system can be used without the
remote control key in the ignition switch for
15 minutes at a time.
Confirm selection in menu system, accept
phone call.
Input for external audio source; AUX and
USB* (e.g. iPodŸ1)
Steering wheel keypad
Centre console control panel
NOTE
Remove the remote control key from the
ignition switch if the audio system is used
when the engine is switched off. This is to
avoid discharging the battery unnecessarily.
1
142
The iPod trademark belongs to Apple Computer Inc.
* Option/accessory, for more information, see Introduction.
Control panel with headphones socket*
Lead up in menu system. Interrupt current
function, end/refuse phone calls, clear
entered characters.
Volume
A short press scrolls between CD tracks or
preset radio stations. A long press fastwinds CD tracks or seeks the next available radio station.
04 Comfort and driving pleasure
Audio system
Rear control panel with headphones
socket*
Headphones with an impedance of
16-32 ohm and sensitivity of 102 dB or higher
are recommended for best sound reproduction.
Audio functions
Activating/deactivating
The control panel is activated with MODE.
Deactivation is possible via a long press on
MODE or when the engine is switched off.
Scroll/search forward and backward
Short presses on (2) are used to scroll between
CD tracks or preset radio stations. A long press
fast-winds CD tracks or seeks the next available radio station.
Limitations
04
• The audio source (FM, AM, CD etc.) played
back in the speakers cannot be controlled
from the rear control panel.
Centre console, controls for audio functions.
AM, FM and CD, internal audio sources
VOLUME – Volume, left and right.
Scroll/search forward and backward.
MODE - Select between AM, FM, CD,
AUX, USB*(e.g. iPodŸ), DAB1/DAB2* and
On/Off. For connection via AUX or USB,
see page 145.
Headphones sockets (3.5 mm).
MODE - Scroll between external audio
sources (AUX, USB* and DAB1/DAB2*).
For connection via AUX or USB, see
page 145.
SOUND - Pushbutton and knob controls
for adjusting the sound pattern
Navigation button
VOLUME - Volume and On/Off
Audio volume and automatic volume
control
The audio system compensates for disrupting
noises in the passenger compartment by
increasing the volume with the speed of the
``
* Option/accessory, for more information, see Introduction.
143
04 Comfort and driving pleasure
Audio system
car. The level of compensation can be set at
low, medium or high. Select the level under
Audio settings Auto. volume control.
Audio controls
Equalizer
Press the control SOUND repeatedly to
browse among the following listed options.
The equalizer2 can be used to adjust different
frequency bands separately.
External audio source audio volume
Adjustment is made by turning the control.
1. Go to Audio settings and select
Equalizer front or Equalizer rear.
The AUX input can be used for connecting an
MP3 player which has no USB connection for
example, see page 145.
NOTE
Press MENU to access the audio settings.
For more information, see page 124.
NOTE
The audio quality may be impaired if the
player is charged while the audio system is
in AUX mode. In which case, avoid charging
the player via the 12 V socket.
04
The audio source connected to the AUX input
may have a different volume to the internal
audio sources. Correct this by adjusting the
input volume of the AUX input:
1. Set the audio system in AUX mode using
the MODE button, press MENU and navigate with (4) to AUX input volume, see
page 142.
2. Turn the SOUND control or press
/
the navigation button, see page 142.
• Bass - Bass level.
• Treble - Treble level.
• Fader – Balance between the front and
rear speakers.
• Balance – Balance between the left and
right-hand speakers.
• Subwoofer* - Bass speaker level. Turning
the control
anticlockwise to Min deactivates the Subwoofer.
• Surround* – Surround settings.
Under Surround 3 channel stereo or Dolby
Surround Pro Logic II can be activated by
selecting 3-ch or Dpl2 respectively. This enables the following options:
• Centre level* – Level for centre speaker.
• Surround level* – Level for surround.
2
144
Only High Performance and Premium Sound.
* Option/accessory, for more information, see Introduction.
The sound level for the wavelength is
on the navigation butadjusted with /
ton. Press
/
to select another wavelength.
2. Use ENTER to save or EXIT to close.
Sound stage
The sound experience can be optimised for the
driver's seat*, both front seats or the rear seat.
Select one of the options under
Audio settings Sound stage.
Optimum sound reproduction
The audio system is calibrated for optimum
sound reproduction by means of digital signal
processing.
This calibration takes into account loudspeakers, amplifiers, passenger compartment
acoustics, listener position etc. for each combination of car model and audio system.
There is a also a dynamic calibration that takes
into account the position of the volume control,
radio reception and vehicle speed.
04 Comfort and driving pleasure
Audio system
The controls explained in these operating
instructions, e.g. Bass, Treble and
Equalizer, are only intended for the user to be
able to adapt the sound reproduction according to personal taste.
tion* then you can control the audio source
using the car's audio controls.
AUX, USB3 and external audio source
2. Connect your iPodŸ, MP3 player or USB
memory stick to the USB connection* in
the centre console's storage compartment
(see preceding illustration).
General
NOTE
Select the connection using the MODE button:
1. If USB is selected then Connect device is
shown in the display.
The system supports the playback of music
files in the MP3, WMA and WAV file formats.
However, there are variants of these file formats that are not supported by the system.
The system also supports most iPodŸ models produced in 2005 or later. iPodŸ Shuffle
is not supported.
USB connection* and RSE*
04
The text Loading is shown in the display when
the system is loading the storage media's file
structure. This may take some time.
Once loading is complete, track information is
shown on the display and the desired track can
be selected.
A track can be selected in three ways:
• With the TUNING control, , see page 142.
• the navigation control's (4) right or leftAn external audio source can be connected to the
car's infotainment system via the USB connection*or AUX input in the centre console.
The AUX input enables the connection of an
external audio source, e.g. an iPodŸ or MP3
player. Read more on page 144.
hand button or, , see page 142.
• the steering wheel keypad (see page 142).
In USB or iPodŸ mode the audio system operates in an equivalent way to the CD player for
playing back music files. For more information,
see page 147.
If the car is equipped with RSE* then the USB
connection* is located in accordance with the
above illustration.
If you choose to connect an iPodŸ, MP3 player
or a USB memory stick to the USB connec3
Only High Performance and Premium Sound.
``
* Option/accessory, for more information, see Introduction.
145
04 Comfort and driving pleasure
Audio system
Audio sources
iPodŸ
USB memory
An iPodŸ is charged and supplied with power
by the USB connection* via the player's connection cable. However, if the player's battery
is fully discharged then it must be charged
before being connected.
To facilitate the use of a USB memory stick,
only store music files on it. It takes a lot longer
for the system to load storage media that contains anything other than compatible music
files.
NOTE
NOTE
04
The system supports removable media
which is compatible with USB 2.0 and the
FAT32 file system, and can handle a maximum of 500 folders and 64 000 files. The
memory must have a capacity of at least 256
Mb.
When an iPodŸ is used as audio source, the
car's infotainment system has a menu
structure that is similar to the iPodŸ player's
own menu structure.
CD functions
NOTE
CD changer position selection*
Scan CD
Start playback (CD player)
If a music CD is in the player when CD is
pressed then playback is started automatically.
Otherwise, insert a disc and press CD.
Start playback (CD changer*)
Start CD playback by pressing the CD button.
If a music CD is in the player when this takes
place then playback is started automatically.
Otherwise, insert a disc and press CD.
1. Select an empty position with the number
buttons 1–6 or
/
on the navigation
button (4).
An empty position is marked on the display. The text Insert disc shows that a new
disc can be inserted. The CD changer can
hold up to six CDs.
MP3 player
2. Insert a CD in the CD changer slot.
Centre console, controls for CD functions.
CD eject
CD insert and eject slot
146
Fast-wind and change CD track
Insert a CD (CD changer*)
When using a longer model USB memory
stick the use of the enclosed USB adapter
cable is recommended. This is to avoid
mechanical wear to the USB input and the
connected USB memory stick.
Many MP3 players have their own file systems
that are not supported by the audio system. For
use in the system, an MP3 player must be set
in USB Removable device/Mass Storage
Device mode.
Navigation button for changing CD tracks
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Audio system
Disc eject
Navigation and playback
Random
A CD will stay in the ejected position for
approx. 12 seconds. Following which it is reinserted in the player and playback continues.
If a disc containing audio files is inside the CD
player then ENTER leads to the disc's directory structure. The directory structure is navigated in the same way as the audio system's
menu structure. Audio files have the symbol
and directories have the symbol
.
Start audio file playback with ENTER.
This function plays the tracks in random order.
The random CD tracks/audio files can be scrolled through in the normal way.
Eject individual discs by pressing the eject button.
Eject all discs with a long press on the eject
button. The entire magazine is emptied disc by
disc.
Pause
If the volume is turned down completely, the
CD player is stopped. The player is restarted
when volume is increased.
Audio files4
The CD player also supports MP3 and WMA
format audio files.
NOTE
Some copy protected audio files may not be
read by the player.
When a CD with audio files is inserted into the
player the disc's file structure is loaded.
Depending on the quality of the disc and the
quantity of information there may be a delay
before playback starts.
4
When the playback of a file is finished the playback of the other files in the same directory
continues. Directory change takes place automatically when all files in the current directory
have been played back.
NOTE
It is only possible to scroll between random
CD tracks on the current disc.
Different messages appear depending on
which random function has been selected:
• RANDOM means that the tracks from only
one music CD are played
Fast-wind/change CD tracks and audio
files
• RND ALL means that all tracks on all
Short presses
/
on the navigation button
are used to scroll between CD tracks/audio
files. Long presses are used to fast-wind CD
tracks/audio files. The steering wheel keypad
can also be used for this purpose. Track
change can also be made by turning
TUNING.
• RANDOM FOLDER means that the audio
Scan CD
This function plays the first ten seconds of
each CD track/audio file. Press SCAN to activate. Interrupt with EXIT or SCAN to continue
playback of the current CD track/audio file.
04
music CDs in the CD changer are played.
files in a directory on the current CD are
played.
CD player
If a normal music CD is being played, activate/
deactivate under Random.
If a disc with audio files is being played, activate/deactivate under Random Folder.
CD changer
If a normal music CD is being played under
Random Single disc or Random All
High Performance and Premium Sound.
``
147
04 Comfort and driving pleasure
Audio system
discs. The option All discs only applies to the
music CDs in the changer.
Radio functions
1. Select wavelength using FM or AM.
If a CD with audio files is being played, activate/
deactivate instead under Random Folder.
If you select another CD the function is deactivated.
2. Turn TUNING.
Preset
10 station presets can be stored per wavelength. FM has 2 memories for presets: FM1
and FM2. The stored presets are selected
using the preset buttons.
Track information
04
If track information is stored on a music CD
then it can be shown on the display. This also
applies to MP3 and WMA files for Premium
Sound and High Performance. Activate/deactivate in CD mode under CD settings Track
information.
Preset storage can be carried out manually or
automatically.
Preset storage, manual
Centre console, controls for radio functions.
Navigation button for tuning, automatic
1. Tune into a station.
Cancel function in progress
2. Hold in a station preset button until the
message Channel stored appears on the
display.
Tuning, manual
Preset storage, automatic
Scan wavelength
The function is especially useful in areas where
the radio stations and their frequencies are
unfamiliar. The 10 strongest radio stations are
stored automatically in a separate memory.
Preset storage, automatic
Preset buttons and preset storage, manual
Select wavelength AM and FM (FM1 and
FM2)
Tuning, automatic
1. Select wavelength using FM or AM.
2. Press
148
Tuning, manual
/
on the navigation button.
1. Select wavelength using FM or AM.
2. Hold in AUTO until Autostoring appears
on the display.
Once Autostoring disappears from the display, the stations are stored. The radio continues in Auto mode and Auto appears on the
display. The automatically stored presets can
04 Comfort and driving pleasure
Audio system
now be selected using the preset buttons.
Automatic preset storage can be cancelled
using EXIT.
Auto mode is cancelled by pressing for example AUTO or FM.
Returning to Auto mode provides access to the
autostored presets:
1. Press AUTO.
> Auto appears on the display.
• Automatically switches to a stronger transmitter if reception in the area is poor.
• Searches for programme type, such as
traffic information or news.
• Receives text information on current radio
programme.
NOTE
Some radio stations do not use RDS or only
some if its functionality.
2. Press a preset button.
Scan wavelength
The function automatically searches the current wavelength for strong stations. When a
station is found, it is played for approx. 8 seconds before scanning is resumed.
1. Select wavelength using AM or FM.
2. Press SCAN.
SCAN appears on the display. Close using
SCAN or EXIT.
RDS functions
RDS (Radio Data System) links FM transmitters
into a network. An FM transmitter in such a
network sends information that gives an RDS
radio the following functions:
If a required programme type is located the
radio can switch stations interrupting the audio
source currently in use. For example, if the CD
player is in use, it is paused. The interrupting
transmission is played at a preset volume, see
page 151. The radio returns to the previous
audio source and volume when the set programme type is no longer broadcast.
The programme functions alarm (ALARM!),
traffic information (TP (Traffic information)),
news (News), and programme types (PTY
(Program type)) interrupt one another in order
of priority, where alarm has the highest priority
and programme types has the lowest. For further programme interruption settings (EON
and Regional), see page 150. Press EXIT to
return to the interrupted audio source.
Alarm
This function is used to warn of serious accidents and catastrophes. The alarm cannot be
temporarily interrupted or deactivated. The
message ALARM! appears on the display
when an alarm message is transmitted.
Traffic information – TP
This function allows traffic information sent
within a set station's RDS network to break
through. The TP (Traffic information) symbol
indicates that the function is activated. If the
set station can send traffic information then
appears on the display.
04
Activate/deactivate under FM settings
TP (Traffic information).
TP from current station/all stations
The radio can interrupt with traffic information
from only the set (current) station or from all
stations.
Go to FM settings Advanced radio
settings TP Station... to change.
News
This function allows news broadcasts sent
within a set station's RDS network to break
through. The NEWS symbol indicates that the
function is active.
``
149
04 Comfort and driving pleasure
Audio system
Activate/deactivate under FM settings
News.
If the radio finds any of the selected programme types, >| To seek appears on the display.
Go to FM settings Advanced radio
settings News station to change.
Programme types – PTY
The PTY function can be used to select different programme types, such as pop music and
serious classic. The PTY symbol indicates that
the function is active. This function allows programme types broadcast within a set station's
RDS network to break through.
To continue searching for another broadcast of the selected programme types,
on the navigation button.
press
The programme type of the current station can
be shown on the display.
Activate/deactivate in FM mode under FM
settings PTY Show PTY
NOTE
Radio text
PTY search
Some RDS stations transmit information on
programme content, artists, etc. This information can be shown on the display.
1. Select a PTY under FM settings
Select PTY.
PTY
Activate/deactivate in FM mode under FM
settings Advanced radio settings
AF.
Regional radio programmes – REG
This function causes the radio to continue with
a regional transmitter even if its signal strength
is low. The symbol REG shows that the function is active.
Not all radio stations support display of programme type.
2. Deactivate by clearing the PTY under FM
settings Clear all PTY.
This function searches the entire wavelength
for the selected programme type.
This function selects one of the strongest
transmitters for a set station. The function may
need to search through the entire FM wavelength to find a strong transmitter. If this
occurs, the radio mutes and PI Seek Press
Exit to cancel appears on the display.
Display of programme type
1. Activate in FM mode by selecting a programme type under FM settings PTY
Select PTY.
150
Automatic frequency update – AF
Search PTY.
The radio can interrupt with news from only the
set (current) station or from all stations.
News from current/all stations
04
2. Go to FM settings
PTY (Program type)
Activate/deactivate in FM mode under FM
settings Advanced radio settings
Regional.
Enhanced Other Networks – EON
Activate/deactivate in FM mode under
Radio text.
This function is useful in urban areas with many
regional radio stations. It allows the distance
between the car and the radio station transmitter to determine when programme functions
should interrupt the current audio source.
Activate/deactivate in FM mode by selecting one of the options under FM settings
Advanced radio settings EON:
04 Comfort and driving pleasure
Audio system
• Local – interrupts only if the radio station
Menu structure FM
Classical
Main menu FM
Other music
FM settings
Weather & metro
transmitter is close.
• Distant5 – interrupts if the station transmitter is far away, even if there is a lot of
static.
• Off – no interruption for programmes from
other transmitters.
Resetting RDS functions
All radio settings can be reset to the original
factory settings.
The reset is carried out in FM mode under
FM settings Advanced radio settings
Reset all.
1.1
News
Finance
1.2
TP (Traffic information)
Children's programs
1.3
Radio text
Social affairs
1.4
PTY (Program type)
Religion
1.4.1
Select PTY
Phone in
Clear all PTY
Travel & touring
Current affairs
Leisure & hobby
Information
Jazz music
Volume control, programme types
Sport
Country music
The interrupting programme types, e.g.
NEWS or TP, are heard at the volume selected
for each respective programme type. If the volume level is adjusted during the programme
interruption, the new level is saved until the
next programme interruption.
Education
National music
Drama
Oldies music
Culture
Folk music
Science
Documentary
Varied speech
1.4.2
Search PTY
Pop music
1.4.3
Show PTY text
Rock music
5
1.5
04
Advanced radio settings
Easy listening
1.5.1
TP station
Light classic
1.5.2
News station
Factory settings.
``
151
04 Comfort and driving pleasure
Audio system
1.5.3
1.5.4
AF
Storing channel groups (Ensemble learn)
• Ensemble - Shows channel groups that
EON
When the vehicle is moved to a new broadcasting area, programming of existing channel
groups in the area can take place.
the receiver has obtained via channel
group programming.
Off
Local
the channel group to which they are allocated. The list can also be filtered using
DAB PTY (see below).
Radio system - DAB*
The lists can be accessed via the menu. The
channel groups can also be accessed by
pressing ENTER.
General
Wavelength
Scanning
DAB (Digital Audio Broadcasting) is a digital
broadcasting system for radio.
DAB is transmitted on two wavelengths6; Band
III and LBand.
Scanning means that all channels in the list are
played for 10 seconds each.
Distant
1.5.5
Regional
1.5.6
Reset all FM settings
04
NOTE
This system does not support DAB+.
Service and Ensemble
• Service - Channel, radio channel (only
audio services are supported by the system).
• Ensemble - A collection of radio channels
on the same frequency.
• Band III – over the whole country7
• LBand - mainly in large cities
By selecting for example Band III on its own,
channel programming takes place more
quickly than if both Band III and LBand are
selected. It is not certain that all channel
groups will be found. Wavelength selection
does not affect the stored memories.
Navigation via lists
There are three types of basic list which can be
used for navigation:
6
7
152
• Service - Shows channels irrespective of
Programming of channel groups creates an
updated list of all available channel groups.
The list is not updated automatically. Programming takes place via the Ensemble learn
menu or directly by means of a long press on
AUTO. If can take up to a minute to program a
channel group if both Band III and LBand are
selected.
Not all areas/countries use both wavelengths.
During a build-up phase DAB will not cover the whole country but will only work in larger urban areas.
* Option/accessory, for more information, see Introduction.
• Subchannel - Subchannels to a selected
channel.
Press SCAN to activate
Scanning can also be selected in DAB-PTY
mode. In which case only channels of the preselected programme type are played.
Stop scanning by pressing SCAN once, or
by pressing EXIT.
Subchannel
Secondary components are usually named
subchannels. These are temporary and can
contain e.g. translations of the main programme into other languages.
04 Comfort and driving pleasure
Audio system
If one or more subchannels are broadcast then
the > symbol is shown to the right of the channel name in the display. A subchannel is indicated by the > symbol appearing to the left of
the channel name in the display.
To access a subchannel:
Press
.
To navigate between subchannels:
Press
or
.
Subchannels can only be accessed on the
selected main channel and not on any other
one without selecting it.
DAB PTY (program type)
DAB PTY selects one type of radio programme. There are 29 different programme
types which also include different programme
categories. After selecting a programme type,
navigation only takes place within the channels
broadcasting that type.
Exit this mode as follows:
Press EXIT
It is also possible to select a preset channel or
exit DAB PTY via the menu. In certain cases
DAB radio will exit PTY mode when DAB to
DAB linking (see below) is implemented.
DAB to DAB link
It is possible to exit a channel with poor or no
reception to the same channel in another channel group with better reception. There may be
a certain delay when changing channel group.
There may be a period of silence between the
current channel no longer being available to the
new channel becoming available.
DAB display settings
1. Basic - Only the channel name is shown if
a primary component is being played. A
subchannel name is shown if it is a subchannel being played
2. Ensemble - Adds the channel group name
to the channel name
3. Ensemble +PTY - Adds the programme
type name under the channel name
Preset
10 station presets can be stored per wavelength. DAB has 2 memories for presets:
DAB1 and DAB2. The stored presets are
selected using the preset buttons.
A preset contains one channel but no subchannels. If a subchannel is being played and
a preset is saved then only the channel ID is
registered. This is because subchannels are
temporary. At the next attempt to retrieve the
preset, the channel which contained the sub-
channel will be played. The preset is not
dependent on the channel list.
A saved channel does not have to be in the
channel list for it to be playable. If the channel
is loaded when it is not available then a preset
number is shown and there is silence until an
available preset is selected for loading. Alternatively another channel.
NOTE
The audio system's DAB system does not
support all functions available in the DAB
standard.
04
Menu structure DAB
Main menu DAB
1.
Select ensemble
2.
Select service
3.
Select subchannel
4.
DAB PTY
4.1.
DAB PTY off
4.2.
News
4.3.
Current affairs
4.4.
Information
4.5.
Sport
``
153
04 Comfort and driving pleasure
Audio system
04
154
4.6.
Education
4.28.
Oldies music
4.7.
Drama
4.29.
Folk music
4.8.
Arts
4.30.
Documentary
4.9.
Science
5.
Ensemble learn
4.10.
Talk
6.
DAB settings
4.11.
Pop music
4.12.
Rock music
4.13.
Calm music
4.14.
Light classic
4.15.
Classical music
4.16.
Other music
4.17.
Weather
6.2.
DAB to DAB link
4.18.
Finance
6.3.
FM traffic
4.19.
Children
6.4.
Select DAB band
4.20.
Factual
6.4.1.
Band III
4.21.
Religion
6.4.2.
LBand
4.22.
Phone in
6.4.3.
4.23.
Travel
LBand & Band
III
4.24.
Leisure
4.25.
Jazz and blues
4.26.
Country music
4.27.
National music
6.1.
6.5.
DAB display settings
6.1.1.
Ensemble
name
6.1.2.
Ensemble
name and
PTY
6.1.3.
Basic
Reset DAB
04 Comfort and driving pleasure
RSE - Rear Seat Entertainment system - Dual Screen*
General
The RSE system can be used at the same time
as the car's infotainment system.
When the rear seat passengers are using DVD,
RSE-AUX or watching TV1 while listening with
headphones, the driver and front seat passenger can still use the car's radio or CD player.
TV overview
System settings
Press
and select TV I DVD I AUX
TV MEDIA MENU.
Audio mode
Factory default
Time zone setting
Channel lock list
CI module
When the system has been used once without
the ignition in position I it is blocked. To restart,
ignition position I must be activated.
NOTE
In the event of extended use (more than 10
minutes) with the engine switched off - the
capacity of the car's battery may decrease
to such a low level that the engine cannot
be started.
In which case a message will appear on the
screen.
1
Channel management
Channel search
No CAM inserted
CI module information
Power consumption, ignition positions
The system can be activated in ignition position
I or II and while the engine is running. When the
car is being started the film stops temporarily
and continues when the engine has started.
TV
04
Signal strength
Management of
new carriers
System settings TV
Add carrier
Press MEDIA MENU
TV.
Information on frequency
Languages
Delete a frequency
TV menu language
Delete all frequencies
Pict. format
Auto scan
System settings
E.g. English
16:9
4:3
Auto
TV is an option for the RSE system.
``
* Option/accessory, for more information, see Introduction.
155
04 Comfort and driving pleasure
RSE - Rear Seat Entertainment system - Dual Screen*
Standard
04
Audio - 1, e.g. ENG.
Audio - 2, e.g. GER.
Zoom
Full screen
Audio mode
Audio
Audio mode
Right
Centered
Left
Right
Stereo
Left
AC3
Banner timeout
System settings-Factory settings
The menus can be
displayed for
between
8-40 seconds.
Press MEDIA MENU
Factory default.
System settings
The system's factory settings are restored
here.
System settings-Sound mode
System settings-Time zone settings
Press MEDIA MENU
Audio mode.
Press MEDIA MENU
Time zone setting.
System settings
The original speech for a TV programme can
be replaced with speech in another language if
the programme is broadcast with several audio
tracks.
System settings
For local programme times to be displayed
correctly the time zone must be set. The
GUIDE and INFO button menus and the clock
are affected by local time zones.
Pay channels
To watch pay channels a payment card must
be fitted in an adapter which is inserted into the
digital TV box.
156
* Option/accessory, for more information, see Introduction.
G031509
Mode (screen
mode)
The box is located behind the left-hand hatch
in the cargo area
1. Open the hatch in the cargo area, it is
secured with Velcro straps.
> The digital TV box is revealed.
2. Open the rubber cover on the box.
3. Fit the payment card into the adapter.
Make sure that it is fitted correctly.
4. Insert the adapter in the digital TV box.
Make sure that it is inserted correctly.
> The system will detect that it has
received new information.
5. Search to watch the new channels that
have become available, see the section
"Payment card TV channels" below.
04 Comfort and driving pleasure
RSE - Rear Seat Entertainment system - Dual Screen*
> The sound is directed to the headphones.
Payment card TV channels
Search so that the system identifies the payment card's channels.
1. Press MEDIA MENU on the remote control.
2. Select Channel search
3.
Select country and press
3. Adjust the audio volume in the headphones
using the volume control/wheel on the
headphones.
A B on
tem in MODE-AUX and press
the remote control to listen via the speakers.
.
Formats supported by the digital TV box
2.
Playing back a CD disc
1. Insert the CD with the label side turned
from the buttons.
> The disc starts to play back automatically.
2. Switch on the wireless headphones, select
CH A for left-hand screen or CH B for righthand screen.
Press
.
Press
.
or
Change CD track with
fast-wind by holding the buttons
depressed.
Pause
1.
2.
3.
Pause and restart the disc with
Stop the disc with
Press
.
.
04
again to eject the disc.
Discs copied privately can be used.
However, playback and quality depend on the
quality of the source file, format and disc quality.
3. Scroll using the navigation buttons to
select a file.
4.
Music
Selecting within a disc directory
1. Load the disc.
Confirm with
Change CD track
Alternatively - activate the car's audio sys-
Auto scan.
The TV system supports MPEG-2 transmissions. There is the option to receive
MPEG-4 transmissions if you buy an adapter.
This adapter is inserted into the digital TV box
and is fitted in the same way as the adapter for
the payment card. See the section "Pay channels" above.
3.
to select the subdirectory.
Different playback options
AUX input, Electrical socket 12 V
The disc can be played back in different ways,
scroll with the navigation buttons to select
playback option.
The input allows you to connect other equipment. Always follow the instructions included
with the external equipment, or from the manufacturer or reseller, when connecting. Equipment connected via the RSE AUX input can use
the screens, wireless headphones, headphones sockets and the car's speakers.
When the dialogue box appears:
1. Press the right-hand navigation button to
move over in the right-hand menu.
2. Scroll using the navigation buttons to
select playback options.
``
* Option/accessory, for more information, see Introduction.
157
04 Comfort and driving pleasure
RSE - Rear Seat Entertainment system - Dual Screen*
System
Connecting the RSE AUX input
Formats supported by the system.
Audio
format
CD-DA, DVD Audio Playback,
MP3, WMA
Video
format
DVD video, VCD, SVCD, DivX/
MPEG-4, WMA video, Photo CD
Kodak, Photo CD JPG
Disc
format
DVD-RAM, DVD-ROM, DVD-RW,
DVD+RW, DVD-R, DVD+R, CD-R,
CD-ROM, CD-RW, CD-3, HDCD
Changing the battery in the remote
control and wireless headphones
The remote control and headphones are powered by 2 AAA batteries.
Take along extra batteries for a long journey.
G030382
04
The RSE-AUX input is located under the front armrest.
1. Connect the video cable to the yellow
socket.
2. Connect the left-hand audio cable to the
white socket and the right-hand one to the
red socket.
Advanced system settings
These settings can only be accessed when the
DVD player is empty.
Press MEDIA MENU.
GENERAL SETUP
ANGLE MARK
CAPTION
3. Connect the power cable to the power
socket if your equipment is designed for
12 V.
AUDIO SETUP
For electrical socket location, see page 200
DVX(R)
REGISTRATION
PREFERENCES
COMPRESSION
SUBTITLE
DEFAULTS
* Option/accessory, for more information, see Introduction.
2. Remove the used batteries, turn the new
batteries in accordance with the symbols
in the battery compartment and insert
them.
3. Fit the cover and screw in the screw.
TV TYPE
AUDIO
158
1. Unscrew the screw and detach the battery
cover.
04 Comfort and driving pleasure
RSE - Rear Seat Entertainment system - Dual Screen*
04
Wireless headphones
1. Unscrew the screw and detach the battery
cover.
2. Remove the used batteries, turn the new
batteries in accordance with the symbols
in the battery compartment and insert
them.
3. Fit the cover and screw in the screw.
NOTE
If the system is too hot to be used or if battery voltage is too low then an information
message appears on the screen.
Environmental care
Be sure to dispose of the exhausted batteries
in an environmentally safe manner.
* Option/accessory, for more information, see Introduction.
159
04 Comfort and driving pleasure
Trip computer
General
Functions
NOTE
If a warning message appears when the trip
computer is used then the message must
first be acknowledged before the trip computer can be reactivated. Acknowledge the
warning message by pressing READ.
To change unit for distance and speed - go to
Car settings Unit settings, see page 124.
04
Average speed
Information display and controls.
READ - confirms
Thumbwheel – browse between menus
and options in the trip computer list
RESET – resets
The trip computer's menu is in a variable loop.
One of the menu options is a blank display - it
also marks the beginning/end of the loop.
Average speed is calculated from the last
resetting. Reset using RESET.
Instantaneous
Current fuel consumption is calculated every
second. The information on the display is
updated every couple of seconds. When the
car is stationary, "----" appears on the display.
Average
Average fuel consumption is calculated from
the last resetting. Reset using RESET.
NOTE
There may be a slight error in the reading if
a fuel-driven supplementary and/or parking
heater* has been used.
Km to empty tank
The calculation is based on the average fuel
consumption over the last 30 km and the
remaining driveable fuel quantity. The display
shows the approximate distance that can be
driven with the fuel quantity remaining in the
tank.
An economic driving style generally results in a
longer driving distance. For more information
on how you can influence fuel consumption,
see page 11.
No guaranteed range remains when the display
shows "---- km to empty tank". Refuel as
soon as possible.
NOTE
There may be a slight error in the reading if
the driving style has been changed.
Resetting
1. Select --- km/h average speed or --.- l/
100km average.
160
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Trip computer
2. Press and hold RESET for
approx. 1 second to reset the selected
function. If RESET is kept depressed for at
least 3 three seconds then Average speed
and Average are reset simultaneously.
Current speed*1
The instrument panel display shows current
speed in mph if the speedometer is graduated
in km/h. If the speedometer is graduated in
mph then the current speed is shown in km/h.
04
1
Only certain markets.
* Option/accessory, for more information, see Introduction.
161
04 Comfort and driving pleasure
DSTC – Stability and traction control system
General information on DSTC
The stability and traction control system, DSTC
(Dynamic Stability and Traction Control) helps
the driver to avoid skidding and improves the
car's traction.
The activation of the system during braking
may be noticed as a throbbing sound. The car
may accelerate slower than expected when the
accelerator pedal is depressed.
04
Operation
Reduced operation
System operation during skidding and acceleration can be reduced. Operation during skidding is delayed and so allows more skidding
which provides greater freedom for dynamic
driving. Traction in deep snow or sand is
improved as traction is no longer limited.
The function limits the driving and brake force
of the wheels individually in order to stabilise
the car.
tem has been temporarily reduced due to
excessive temperature in the brake discs.
Spin Control
The function prevents the driving wheels from
spinning against the road surface during acceleration.
The function is active at low speed and transfers power from the driving wheel that is spinning to the one that is not.
The function is reactivated automatically
when the brakes have cooled.
G021409
DSTC Service required system disabled due
to a fault.
1. Turn the thumbwheel (1) until the DSTC
menu is shown. DSTC-ON means that the
system function is unchanged.
DSTC spin control OFF means that system operation is reduced.
2. Press and hold RESET (2) until the DSTC
menu is changed.
162
WARNING
The car's driving characteristics may deteriorate if the function is reduced.
Messages in the information display
DSTC Temporarily OFF means that the sys-
Active Yaw Control
Traction control system
The system will remain reduced until the engine
is switched off - after the engine is started the
next time DSTC is back in its normal mode
again.
Stop the car in a safe place and turn off the
engine.
> If the message remains when the engine
is restarted, drive to a workshop. An
authorised Volvo workshop is recommended.
Symbols in the combined instrument
panel
If the symbols
and
are shown at
the same time - read the message on the information display.
04 Comfort and driving pleasure
DSTC – Stability and traction control system
If the symbol
appears alone then it may
appear as follows:
• Flashing light means that the system is
now being activated.
• Constant glow for 2 seconds means system check when the engine is started.
• Constant glow after starting the engine or
while driving means system fault.
04
163
04 Comfort and driving pleasure
Adapting driving characteristics
Active chassis (Four-C)*
Operation
Active chassis, Four-C (Continously Controlled
Chassis Concept), regulates the characteristics of the shock absorbers so that the car's
driving characteristics can be adjusted. There
are three settings: Comfort, Sport and
Advanced.
Comfort
04
This setting means that the car is perceived as
being more comfortable on rough and uneven
road surfaces. Shock absorption is soft and the
movement of the body is smooth and gentle.
Sport
This setting means that the car is perceived as
being more sporty and is recommended for
more active driving. Steering response is faster
than in the Comfort mode. Shock absorption is
harder and the body follows the road in order
to reduce rolling during cornering.
Use the buttons in the centre console to
change setting. The setting in use when the
engine is switched off is activated next time the
engine is started.
Advanced
Steering force increases with the speed of the
car to give the driver enhanced sensitivity. The
steering is firmer and more immediate on
motorways. Steering is light and requires no
extra effort when parking and at low speed.
This setting is only recommended on very even
and smooth road surfaces.
The shock absorbers are optimised for maximum roadholding and rolling in bends is further
minimised.
164
Chassis settings.
Speed related power steering*
The driver can choose between three different
levels of steering force for road responsiveness
or steering sensitivity. Go to Car settings
Steering force level in the menu system and
select Low, Medium or High.
* Option/accessory, for more information, see Introduction.
For a description of the menu system, see
page 125. This menu cannot be accessed
while the car is in motion.
04 Comfort and driving pleasure
Cruise control*
Operation
The cruise control is then activated with
or
, after which the current speed is stored in
the memory - the display text (---) km/h
changes to show the selected speed, e.g. 100
km/h.
Cruise control is temporarily disengaged and
set in standby mode if:
G021411
Cruise control cannot be engaged at
speeds below 30 km/h.
Cruise control - On/Off.
Standby mode ceases and the stored
speed is resumed.
Standby mode
Activate and adjust the speed.
Selected speed (in brackets = Standby
mode).
Activating and setting the speed
Switch on the cruise control with one press on
the steering wheel button CRUISE - the symbol
is illuminated in the display (5) and the
brackets around (---) km/h show that the
cruise control is set in standby mode.
Press
to temporarily disengage the cruise
control and set it in standby mode - set speed
is shown in brackets in the display (5), e.g.
(100) km/h.
Automatic standby mode
NOTE
Steering wheel keypad and display.
Temporary deactivation - standby mode
Changing the speed
In active mode the speed is adjusted with long
or short presses on
or
- the last press is
stored in the memory.
A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car returns
to the set speed when the accelerator pedal is
released.
•
•
•
•
•
wheels lose traction
the foot brake is used
04
speed falls below approx. 30 km/h
the clutch pedal is depressed
the gear selector is moved to neutral position (automatic gearbox)
• the driver maintains a speed higher than
the set speed for longer than 1 minute.
The driver must then regulate the speed.
Resume set speed
NOTE
If any cruise control button is held
depressed for more than approx. 1 minute
then cruise control is disengaged. The
engine must be switched off in order to reset
cruise control.
Cruise control in standby mode is re-activated
with one press on the steering wheel button
- the speed is then set to the last stored
speed.
NOTE
A significant increase in speed may arise
after the speed has been resumed with
.
``
* Option/accessory, for more information, see Introduction.
165
04 Comfort and driving pleasure
Cruise control*
Deactivate
The cruise control is switched off with the
steering wheel button CRUISE or by switching
off the engine - the set speed is deleted from
the memory and cannot be resumed with the
button.
04
166
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Adaptive cruise control*
Function
WARNING
The driver must always be observant with
regard to the traffic conditions and intervene
when the adaptive cruise control is not
maintaining a suitable speed or suitable distance.
The driver sets the desired speed and time
interval to the car in front. When the radar
detector detects a slower vehicle in front of the
car, the speed is automatically adapted to that.
When the road is clear again the car returns to
the selected speed.
The Function section and onwards informs
about limitations of which the driver should
be aware before using the adaptive cruise
control.
If the adaptive cruise control is switched off or
set to the standby mode and the car comes too
close to a vehicle in front, then the driver is
warned by Distance Alert (see page 175) about
the short distance.
The adaptive cruise control cannot handle
all traffic, weather and road conditions.
The driver always bears responsibility for
maintaining the correct distance and speed,
even when the adaptive cruise control is
being used.
G021412
General information on ACC
The adaptive cruise control (ACC – Adaptive
Cruise Control) helps the driver maintain a safe
distance from the vehicle ahead. It provides a
more relaxing driving experience on long journeys on motorways and long straight main
roads in smooth traffic flows.
04
Functions overview.
Warning lamp, braking by driver required
Steering wheel keypad
Radar sensor
IMPORTANT
Maintenance of adaptive cruise control
components must only be performed at a
workshop - an authorised Volvo workshop
is recommended.
Adaptive cruise control consists of a cruise
control system and a coordinated spacing system.
``
* Option/accessory, for more information, see Introduction.
167
04 Comfort and driving pleasure
Adaptive cruise control*
WARNING
Adaptive cruise control is not a collision
avoidance system. The driver must intervene if the system does not detect a vehicle
in front.
The adaptive cruise control does not brake
for humans or animals, and not for small
vehicles such as bicycles and motorcycles.
Nor for oncoming, slow or stationary vehicles and objects.
04
Do not use the adaptive cruise control, for
example, in city traffic, in dense traffic, at
junctions, on slippery surfaces, with a lot of
water or slush on the road, in heavy rain/
snow, in poor visibility, on winding roads or
on slip roads.
The distance to the vehicle ahead is mainly
measured by a radar sensor. Cruise control
regulates the speed with acceleration and
braking. It is normal for the brakes to emit a low
sound when they are being used by cruise control.
WARNING
The brake pedal moves when the cruise
control brakes. Do not rest your foot under
the brake pedal as it could become trapped.
The adaptive cruise control aims to follow the
vehicle ahead in the same lane at a time interval
168
set by the driver. If the radar sensor cannot see
any vehicle in front then the car will instead
maintain the cruise control's set speed. This
also happens if the speed of the vehicle in front
exceeds the cruise control's set speed.
warning system's warning lamp and warning
sound (see page 179) to alert the driver that
immediate intervention is required.
The cruise control aims to control the speed in
a smooth way. In situations that demand sudden braking the driver must brake himself/herself. This applies with large differences in
speed, or if the vehicle in front brakes heavily.
Due to limitations in the radar sensor, braking
may come unexpectedly or not at all, see
page 171.
The warning lamp may be difficult to notice
in strong sunlight or when sunglasses are
being worn.
The adaptive cruise control can be activated to
follow another vehicle at speeds from
30 km/h up to 200 km/h. If the speed falls
below 30 km/h or if the engine speed becomes
too low, the cruise control is set in standby
mode at which automatic braking ceases - the
driver must then take over himself/herself to
maintain a safe distance to the vehicle ahead.
Warning lamp - braking by driver
required
Adaptive cruise control has a braking capacity
that is equivalent to more than 40% of the car's
braking capacity.
If the car needs to be braked more heavily than
cruise control capacity and the driver does not
brake, then the cruise control uses the collision
* Option/accessory, for more information, see Introduction.
NOTE
WARNING
Cruise control only warns of vehicles
detected by the radar sensor. Consequently
there may be no warning or it may be subject to a delay. Do not wait for a warning but
brake when it is necessary.
Steep roads and/or heavy load
Bear in mind that the adaptive cruise control is
primarily intended for use when driving on level
road surfaces. The cruise control may have difficultly in keeping the correct distance from the
vehicle ahead when driving on steep roads,
with a heavy load or with a trailer - in which
case, be extra attentive and ready to slow
down.
04 Comfort and driving pleasure
Adaptive cruise control*
Operation
(---) mean that cruise control is set in standby
mode.
The cruise control is then activated with
or
, after which the current speed is stored in
the memory - the display text (---) changes to
show the selected speed, e.g. 100 without
brackets.
When the symbol
changes
to
the radar sensor has
detected a vehicle.
Standby mode ceases and the stored
speed is resumed.
Only when the symbol
(with car) is illuminated, is the
distance to the vehicle in front
regulated by the cruise control.
Cruise control - On/Off or Standby mode.
Changing the speed
Time interval - Increase/decrease.
In active mode the speed is adjusted 5 km/h
or
. In active mode
with each press on
the button
has the same function as
but
results in a lower increase in speed. The last
press is stored in the memory.
Steering wheel keypad and display.
Activate and adjust the speed.
Selected speed (in brackets = Standby
mode).
Time interval - On, during adjustment.
Time interval - On, after adjustment.
Activating and setting the speed
Switch on cruise control with one press on the
steering wheel button
- the symbol
is
illuminated in the display. The brackets (6) at
NOTE
If any cruise control button is held
depressed for more than approx. 1 minute
then cruise control is disengaged. The
engine must be switched off in order to reset
cruise control.
In certain situations, cruise control cannot
be activated. Then the display shows
Cruise control Unavailable, see
page 173.
04
Set time interval
Different time intervals to the
vehicle in front can be
selected and shown in the
display as 1-5 horizontal lines
- the more lines the longer the
time distance. One line corresponds to approximately
1 second, 5 lines approximately 2.5 seconds.
The time interval is increased using the steering
wheel button
and decreased using
.
At low speed, when the distances are short, the
adaptive cruise control increases the time
interval slightly.
The adaptive cruise control allows the time
interval to vary noticeably in certain situations
in order to allow the car to follow the vehicle in
front smoothly and comfortably.
``
* Option/accessory, for more information, see Introduction.
169
04 Comfort and driving pleasure
Adaptive cruise control*
04
Note that a short time interval only allows the
driver a short time to react and take action if
any unforeseen traffic problem should arise.
Standby mode due to driver intervention
An automatic deactivation can be due to:
Cruise control is temporarily disengaged and
set in standby mode if:
The number of lines for the
selected time interval is
shown during the setting itself
and for several seconds afterwards. Then a smaller scale
version of the symbol is
shown to the right of the display. The same symbol is also shown when
Distance Alert is activated, see page 175.
• the foot brake is used
• the clutch pedal is depressed for longer
•
•
•
•
•
NOTE
Only use the time interval that is allowed in
accordance with local traffic regulations.
If cruise control does not seem to react to
activation the reason may be that the time
interval to the closest vehicle prevents an
increase in speed.
The higher the speed, the longer the calculated distance in metres for a specific time
interval.
Temporary deactivation - standby mode
Press the steering wheel button
to temporarily disengage the cruise control and set it in
standby mode - set speed is shown in brackets
in the display, e.g. (100).
1
170
than 1 minute1
• the gear selector is moved to N position
(automatic gearbox)
• the driver maintains a speed higher than
the set speed for longer than 1 minute
The driver must then regulate the speed.
A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car returns
to the last stored speed when the accelerator
pedal is released.
Automatic standby mode
Adaptive cruise control is dependent on other
systems e.g. stability and traction control
(DSTC). If any of these systems stop working
then cruise control is automatically deactivated.
In the event of automatic deactivation a signal
will sound and the message Cruise control
Cancelled is shown in the display. The driver
must then intervene and adapt the speed and
distance to the vehicle ahead.
Disengaging and selecting a higher or lower gear does not involve standby mode.
* Option/accessory, for more information, see Introduction.
engine speed is too low/high
speed falls below 30 km/h
wheels lose traction
brake temperature is high
the radar sensor is covered e.g. by wet
snow or heavy rain (radar waves blocked).
Resume set speed
Cruise control in standby mode is re-activated
with one press on the steering wheel button
- the speed is then set to the last stored
speed.
NOTE
A significant increase in speed may arise
after the speed has been resumed with
.
Deactivate
The cruise control is switched off with the
steering wheel button
in standby mode or
with one long press in active mode. The set
speed is cleared and cannot be resumed with
the
button.
04 Comfort and driving pleasure
Adaptive cruise control*
The radar sensor and its limitations
Apart from the adaptive cruise control, the
radar sensor is also used by the Collision
Warning with Auto Brake function (see
page 178) and the Distance Alert function (see
page 175). The function of the radar sensor is
to detect cars or larger vehicles in the same
direction, in the same lane.
Modification of the radar sensor could result in
it being illegal to use.
WARNING
The driver must always be observant with
regard to the traffic conditions and intervene
when the adaptive cruise control is not
maintaining a suitable speed or suitable distance.
The adaptive cruise control cannot handle
all traffic, weather and road conditions.
The Function section and onwards informs
about limitations of which the driver should
be aware before using the adaptive cruise
control.
The driver always bears responsibility for
maintaining the correct distance and speed,
even when the adaptive cruise control is
being used.
NOTE
WARNING
Accessories or other objects such as auxiliary lamps must not be installed in front of
the grille.
Keep the surface in front of the radar sensor
clean.
• if the speed of vehicles in front is significantly different from your own speed.
WARNING
Adaptive cruise control is not a collision
avoidance system. The driver must intervene if the system does not detect a vehicle
in front.
The adaptive cruise control does not brake
for humans or animals, and not for small
vehicles such as bicycles and motorcycles.
Nor for oncoming, slow or stationary vehicles and objects.
Examples where the cruise control does
not work optimally
The radar sensor has a limited field of vision. In
some situations another vehicle is not
detected, or the detection is made later than
expected.
04
Do not use the adaptive cruise control, for
example, in city traffic, in dense traffic, at
junctions, on slippery surfaces, with a lot of
water or slush on the road, in heavy rain/
snow, in poor visibility, on winding roads or
on slip roads.
The capacity of the radar sensor to detect vehicles in front is reduced significantly:
• if the radar sensor becomes blocked and
cannot detect other vehicles e.g. in heavy
rain or slush, or if other objects have collected in front of the radar sensor.
``
* Option/accessory, for more information, see Introduction.
171
04 Comfort and driving pleasure
Adaptive cruise control*
Sometimes the radar sensor is late at
detecting vehicles at close distances, e.g.
a vehicle that drives in between the car and
vehicles in front.
The following table presents possible causes
for a message being shown along with the
appropriate action.
Small vehicles, such as motorcycles, or
vehicles not driving in the centre of the lane
can remain undetected.
In bends the radar sensor may detect the
wrong vehicle or lose a detected vehicle
from view.
04
Fault tracing and action
If the display shows the message Radar
blocked See manual this means that the
radar signals from the radar sensor are blocked
and that vehicles in front of the car could not
be detected.
The ACC cannot see small vehicles (Dark triangle:
ACC field of vision).
172
In turn this means that the Adaptive Cruise
Control, Distance Alert and Collision Warning
with Auto Brake functions are not operating
either.
Cause
Action
The radar surface in the grille is dirty or covered with ice or snow.
Clean the radar surface in the grille from dirt, ice and snow.
Heavy rain or snow blocking the radar signals.
No action. Sometimes the radar does not work during heavy rain or
snowfall.
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Adaptive cruise control*
Cause
Action
Water or snow from the road surface swirls up and blocks the radar signals.
No action. Sometimes the radar does not work on a very wet or snowy
road surface.
The radar surface has been cleaned but the message remains.
Wait. It could take several minutes for the radar to sense that it is no
longer blocked.
Symbols and messages in the display
Symbol
Message
Specification
04
Standby mode or active mode without detected vehicle.
Active mode with detected vehicle to which cruise control adapts the speed.
Time interval activated, during adjustment.
Time interval activated, after adjustment.
Turn on DSTC to enable
Cruise
Cruise control cannot be activated until the stability and traction control function (DSTC) has been set
in Normal mode.
Cruise control Cancelled
The cruise control has been deactivated - the driver has to regulate the speed.
Cruise control Unavailable
Cruise control cannot be activated.
This could be due to:
• brake temperature is high
• the radar sensor is blocked by e.g. wet snow or rain.
``
* Option/accessory, for more information, see Introduction.
173
04 Comfort and driving pleasure
Adaptive cruise control*
Symbol
Message
Specification
Radar blocked See manual
Cruise control temporarily disengaged.
• The radar sensor is blocked and cannot detect other vehicles. For example, in the event that heavy
rain or if slush has collected in front of the radar sensor.
Read about the limitations of the radar sensor, see page 171.
Cruise control Service
required
Cruise control not working.
• Contact a workshop - an authorised Volvo workshop is recommended.
04
174
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Distance Alert*
General
Set time interval
WARNING
Distance Alert is a function that informs the
driver about the time interval to vehicles in
front.
Distance alert is active at speeds above
30 km/h and only reacts to vehicles driving in
front of the car, in the same direction. No distance information is provided for oncoming,
slow or stationary vehicles.
Distance Alert only reacts if the distance to
the vehicle ahead is shorter than the preset
value - the speed of the driver's vehicle is
not affected.
Operation
04
Controls and display for time interval.
Time interval - Increase/decrease
G017362
Time interval - On, during adjustment
Time interval - On, after adjustment
Yellow warning light.
A yellow warning lamp in the windscreen illuminates with a constant glow if the distance to
the vehicle in front is shorter than the set time
interval.
NOTE
Distance Alert is deactivated during the time
that Adaptive Cruise Control is active.
Press the button in the centre console to switch
the function on or off. The function is switched
on if one lamp is illuminated in the button.
Time intervals are increased using
decreased using
.
and
Different time intervals to the
vehicle in front can be
selected and shown in the
display as 1-5 horizontal lines
- the more lines the longer the
time interval. One line corresponds to approximately
1 second to the vehicle in front, 5 lines approximately 2.5 seconds.
``
* Option/accessory, for more information, see Introduction.
175
04 Comfort and driving pleasure
Distance Alert*
The number of lines for the
selected time interval is
shown during the setting itself
and for several seconds afterwards. Then a smaller scale
version of the symbol is
shown to the right of the display. The same symbol is also shown when
adaptive cruise control is activated.
04
Limitations
The function uses the same radar sensor as
adaptive cruise control and the collision warning system. For more information on the radar
sensor and its limitations, see page 171.
Poor weather or winding roads could affect
the radar sensor's capacity to detect vehicles in front.
The size of other vehicles could also affect
detection capacity, e.g. motorcycles. This
could mean that the warning lamp illuminates at a shorter distance than the setting
or that the warning is temporarily absent.
NOTE
The higher the speed, the longer the calculated distance in metres for a specific time
interval.
Extremely high speeds can also cause the
lamp to illuminate at a shorter distance than
that set due to limitations in sensor range.
The set time interval is also used by the
adaptive cruise control function, see
page 169.
Only use the time interval that is allowed in
accordance with local traffic regulations.
Symbols and messages in the display
Symbol
Message
Specification
Set time interval, during adjustment.
Set time interval, after adjustment.
176
NOTE
Strong sunlight, reflections or strong variations in light intensity, as well as wearing
sunglasses, could mean that the warning
light in the windscreen cannot be seen.
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Distance Alert*
Symbol
Message
Specification
Radar blocked.
Distance Alert temporarily disengaged.
See manual
The radar sensor is blocked and cannot detect other vehicles, e.g. in the event that heavy rain or slush
has collected in front of the radar sensor.
Read about the limitations of the radar sensor, see page 171.
Collision warn. Service
required
Distance Alert and Collision Warning with Auto Brake are fully or partially disengaged.
Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
04
* Option/accessory, for more information, see Introduction.
177
04 Comfort and driving pleasure
Collision Warning & Pedestrian Detection with Auto Brake*
General
Collision Warning and Pedestrian Detection
with Auto Brake (Collision Warning and
Pedestrian Detection with Full Auto Brake) is
designed to assist the driver when there is a
risk of colliding with a pedestrian or vehicle in
front that is stationary or moving in the same
direction.
The collision warning system has the following
three functions.
04
The collision warning system must not be used
as an excuse for the driver to change his/her
driving style. If the driver solely relies on Collision Warning with Auto Brake to do the braking, there will be a collision sooner or later.
IMPORTANT
Maintenance of collision warning system
components must only be performed at a
workshop - an authorised Volvo workshop
is recommended.
• Collision Warning – Warns the driver of a
potentially imminent collision.
WARNING
• Brake Support – Assists the driver to
brake effectively in a critical situation.
• Auto Brake - Brakes the car automatically
in the event of an imminent risk of collision
with a pedestrian or vehicle in front, if the
driver does not himself/herself react in time
by braking and/or steering away. The Auto
Brake function can prevent a collision or
reduce collision speed.
No automatic system can guarantee
100 % correct function in all situations.
Therefore, never try out the Auto brake system by driving towards people - this may
cause serious injuries or risk death.
The collision warning system is activated in situations where the driver should have started
braking a lot earlier, which is why the function
cannot help the driver in every situation.
Collision Warning with Auto Brake is designed
to be activated as late as possible in order to
avoid unnecessary intervention.
178
* Option/accessory, for more information, see Introduction.
WARNING
The collision warning system does not
engage in all driving situations or traffic,
weather or road conditions. The collision
warning system does not react to vehicles
driving in another direction to the car or to
animals.
Warning only activated in the event of a high
risk for collision. The Function section and
the section after advise about limitations of
which the driver should be aware before
using Collision Warning with Auto Brake.
Warnings and brake interventions for
pedestrians are switched off at vehicle
speeds exceeding 80 km/h.
Warnings and brake interventions for
pedestrians do not work in darkness and
tunnels - not even when streetlights are lit.
The auto-brake function can prevent a collision or reduce collision speed. To ensure
full brake performance, the driver should
always depress the brake pedal - even when
the car auto-brakes.
Never wait for a collision warning. The driver
is always responsible that the correct distance and speed are maintained - even
when the collision warning system with
auto-brake is used.
04 Comfort and driving pleasure
Collision Warning & Pedestrian Detection with Auto Brake*
Function
Brake support
Operation
If the risk of collision still increases after the
collision warning then the brake support is activated. The brake support prepares the brake
system for rapid braking and the brakes are
applied gently, which may be noticed as a
slight jerk.
Settings are made from the centre console display via a menu system. For information on
how the menu system is used, see page 124.
G017382
If the brake pedal is depressed sufficiently
quickly then full brake function is implemented.
Functions overview.
Visual warning signal in the event of a collision risk
Radar sensor
Camera sensor
Collision warning
Together with a camera sensor, the radar sensor detects pedestrians, stationary vehicles as
well as vehicles driving in the same direction in
front of the car.
In the event of there being a risk of collision with
a pedestrian or such a vehicle your attention is
drawn with a red flashing warning signal and a
warning sound.
Brake support also reinforces the driver's braking if the system considers that the braking is
not sufficient to avoid a collision.
Auto Brake
If the driver has not yet started an evasive
manoeuvre in this situation and the risk of a
collision is imminent then the Auto Brake function comes into effect, without the driver needing to touch the brake pedal. Braking then
takes place with full brake force in order to
reduce collision speed, or with limited brake
force if it is sufficient to avoid collision.
NOTE
The Brake Support and Auto Brake functions are always enabled - they cannot be
deactivated.
On and Off
04
To select whether the collision warning system
should be switched on or off: In the menu Car
settings Collision warning settings
choose between the options On or Off.
An activated function is tested at each engine
start by briefly illuminating the warning lamp's
separate points of light.
When starting the engine, the setting that was
selected when the engine was switched off is
obtained automatically.
Activating/deactivating warning signals
The warning lamp is activated automatically
when the engine is started if the system is
switched on.
The warning sound can be activated/deactivated separately using the options for On or
Off in the menu system under Car settings
``
* Option/accessory, for more information, see Introduction.
179
04 Comfort and driving pleasure
Collision Warning & Pedestrian Detection with Auto Brake*
Collision warning settings
warn ON Audio ---.
Collis'n
Set warning distance
The warning distance regulates the distance at
which the visual and acoustic warnings are
deployed. Select one of the options from
Long, Normal or Short in the menu system
under Car settings Collision warning
settings Warning distance.
04
The warning distance determines the system's
sensitivity. Warning distance Long provides an
earlier warning. First test with Long and if this
setting produces too many warnings, which
could be perceived as irritating in certain situations, then change to warning distance
Normal.
Only use warning distance Short in exceptional cases, e.g. for dynamic driving.
NOTE
When the adaptive cruise control is in use
the warning lamp and warning sound will be
used by the cruise control even if the collision warning system is switched off.
The collision warning system warns the
driver in the event of a risk of a collision, but
the function cannot shorten driver reaction
time.
In order for the collision warning system to
be effective, always drive with the Distance
Alert set at time interval 4 – 5. see
page 175.
The collision warning system is active from and
including approx. 4 km/h.
The visual warning signal may be difficult to
notice in the event of strong sunlight, reflections, when sunglasses are being worn or if the
driver is not looking straight ahead. The warning sound should therefore always be activated.
On slippery road surfaces the braking distance
is extended, which may reduce the capacity to
avoid a collision. In such situations the ABS
and DSTC systems will provide best possible
braking force with maintained stability.
NOTE
Even if the warning distance has been set to
Long then in certain situations warnings
could be perceived as being late. E.g. in the
event of large differences in speed or if vehicles in front brake heavily.
Checking settings
The settings required can be controlled on the
centre console display. Access via the menu
for Car settings Collision warning
settings, see page 125.
180
Limitations
* Option/accessory, for more information, see Introduction.
NOTE
The visual warning signal can be temporarily
disengaged in the event of high passenger
compartment temperature caused by
strong sunlight for example. If this occurs
then the warning sound is activated even if
it is deactivated in the menu system.
•
Warnings may not appear if the distance to the vehicle in front is small or if
steering wheel and pedal movements
are large, e.g. a very active driving style.
04 Comfort and driving pleasure
Collision Warning & Pedestrian Detection with Auto Brake*
WARNING
Warnings and brake interventions could be
implemented late or not at all if the traffic
situation or external influences mean that
the radar or camera sensor cannot detect a
pedestrian or a vehicle in front correctly.
The sensor system has a limited range for
pedestrians and the system therefore provides effective warnings and brake interventions at vehicle speeds up to 50 km/h.
For stationary or slow-moving vehicles,
warnings and brake interventions are effective at vehicle speeds up to 70 km/h.
Warnings for stationary or slow-moving
vehicles could be disengaged due to darkness or poor visibility.
The collision warning system uses the same
radar sensors as adaptive cruise control. For
more information on the radar sensor and its
limitations, see page 171.
If warnings are perceived as being too frequent
or disturbing then the warning distance can be
reduced. This would lead to the system warning at a later stage, which reduces the total
number of warnings.
why the system does not intervene in situations
where the car is approaching a vehicle in front
very slowly, e.g. when parking.
Driver commands are always prioritised, which
is why Collision Warning with Auto Brake does
not intervene in situations where the driver is
steering, braking or accelerating in a clear
manner, even if a collision is unavoidable.
When Auto Brake has prevented a collision
with a stationary object the car remains stationary for a maximum of 1.5 seconds. If the car
is braked for a vehicle in front that is moving,
then speed is reduced to the same speed as
that maintained by the vehicle in front.
On a car with manual gearbox the engine stops
when Auto Brake has stopped the car, unless
the driver manages to depress the clutch pedal
beforehand.
Camera sensor limitations
The car's camera sensor is used by the three
functions - Collision Warning with Auto Brake,
Driver Alert Control, see page 185 and Lane
Departure Warning, see page 188.
NOTE
Keep the windscreen surface in front of the
camera sensor clean from ice, snow, mist
and dirt.
Do not attach or fit anything to the windscreen in front of the camera sensor, as this
could reduce or prevent the function of one
or more camera-dependent systems.
The camera sensors have limitations similar to
the human eye, i.e. they "see" worse in darkness, heavy snowfall or rain and in thick fog for
example. Under such conditions the functions
of camera-dependent systems could be significantly reduced or temporarily disengaged.
04
Strong oncoming light, reflections in the carriageway, snow or ice on the road surface, dirty
road surfaces or unclear lane markings could
also significantly reduce camera sensor function when it is used to scan the carriageway
and detect pedestrians and other vehicles.
During very high temperatures the camera is
temporarily switched off for about 15 minutes
after the engine is started in order to protect
camera functionality.
When the car is reversing Collision Warning
with Auto Brake cannot be activated.
Collision Warning with Auto Brake is not activated at low speeds - under 4 km/h, which is
``
* Option/accessory, for more information, see Introduction.
181
04 Comfort and driving pleasure
Collision Warning & Pedestrian Detection with Auto Brake*
Detection of pedestrians (Pedestrian
detection)
• In order for a pedestrian to be detected he/
she must appear full-length and have a
height of at least 80 cm.
• The system cannot detect a pedestrian
carrying larger items.
• The camera sensor's ability to see pedestrians at dusk and dawn is limited - just like
the human eye.
• The camera sensor's capacity to detect
pedestrians is deactivated when driving in
darkness and tunnels - even when streetlights are lit.
04
Optimal examples of what the system regards as
pedestrians with clear body contours.
Optimal performance of the system requires
that the system function that detects pedestrians receives as unambiguous information as
possible about the contours of the body - this
implies the opportunity to identify the head,
arms, shoulders, legs, upper and lower body
combined with a normal human pattern of
movement.
If large parts of the body are not visible to the
camera then the system cannot detect a
pedestrian.
182
WARNING
Collision Warning with Auto Brake is an
assistance tool.
It cannot detect all pedestrians in all situations and it cannot see e.g. partially
obscured pedestrians, shorter people or
children (below 80 cm) or people in clothing
that hides the contours of the body.
•
The driver is always responsible that the
vehicle is driven properly and with a
safety distance adapted to the speed.
Fault tracing and action
If the display shows the message Windscreen
Sensors blocked then this means that the
camera sensor is blocked and cannot detect
* Option/accessory, for more information, see Introduction.
pedestrians, vehicles or road markings in front
of the car.
In turn this means that the Collision Warning
with Auto Brake, Lane Departure Warning and
Driver Alert Control functions are not operating
with full functionality.
The following table presents possible causes
for a message being shown along with the
appropriate action.
Cause
Action
The windscreen surface in front of the
camera is dirty or
covered with ice or
snow.
Clean the windscreen surface in
front of the camera
from dirt, ice and
snow.
Thick fog, heavy rain
or snow means that
the camera does not
work sufficiently
well.
No action. At times
the camera does not
work during heavy
rain or snowfall.
04 Comfort and driving pleasure
Collision Warning & Pedestrian Detection with Auto Brake*
Cause
Action
Cause
Action
Cause
Action
The windscreen surface in front of the
camera has been
Wait. It may take
several minutes for
cleaned but the
message remains.
the camera to measure the visibility.
Dirt has appeared
between the inside
of the windscreen
and the camera.
Visit a workshop to
have the windscreen
inside the camera
cover cleaned - an
authorised Volvo
workshop is recommended.
04
Symbols and messages in the display
Symbol
Message
Specification
Collis'n
warning
OFF
Collision warning system switched off.
Shown when the engine is started.
The message clears after about 5 seconds or after one press of the READ button.
Collision
warn.
Unavailable
The collision warning system cannot be activated.
Auto braking was
activated
Auto Brake has been active.
Shown when the driver attempts to activate the function.
The message clears after about 5 seconds or after one press of the READ button.
The message clears after one press of the READ button.
``
* Option/accessory, for more information, see Introduction.
183
04 Comfort and driving pleasure
Collision Warning & Pedestrian Detection with Auto Brake*
Symbol
Message
Specification
Windscreen
Sensors
blocked
The camera sensor is temporarily disengaged.
Shown in the event of snow, ice or dirt on the windscreen for example.
• Clean the windscreen surface in front of the camera sensor.
Read about the limitations of the camera sensor, see page 181.
04
Radar
blocked
See manual
Collision Warning with Auto Brake is temporarily disengaged.
The radar sensor is blocked and cannot detect other vehicles. For example, in the event that heavy rain or if slush has
collected in front of the radar sensor.
Read about the limitations of the radar sensor, see page 171.
Collision
warn.
Service
required
184
Collision Warning with Auto Brake is fully or partially disengaged.
• Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Driver Alert System – DAC*
General information on Driver Alert
System
General information on Driver Alert
Control - DAC
The objective for DAC is to detect slowly deteriorating driving ability and it is primarily
intended for major roads. The function is not
intended for city traffic.
The Driver Alert System is intended to assist
drivers whose driving ability is deteriorating or
who are inadvertently leaving the lane they are
driving on.
In some cases driving ability is not affected
despite driver fatigue. In which case there may
not be any warning issued for the driver. For
this reason it is always important to stop and
take a break in the event of any signs of driver
fatigue, irrespective of whether or not DAC
issues a warning.
The Driver Alert System consists of two different functions, which can either be switched on
at the same time or individually:
• Driver Alert Control (DAC)
• Lane Departure Warning (LDW), see
page 188.
A switched-on function is set in standby mode
and is not activated automatically until speed
exceeds 65 km/h.
The function is deactivated again when speed
decreases to below 60 km/h.
Both functions use a camera which is dependent on the lane having side markings painted
on each side.
WARNING
The Driver Alert System does not work in all
situations but is instead only intended to be
of supplementary assistance.
The driver always has ultimate responsibility
that the car is driven safely.
04
NOTE
The function is intended to attract the driver's
attention when he/she starts to drive less consistently, e.g. if he/she becomes distracted or
starts to fall asleep.
A camera detects the side markings painted on
the carriageway and compares the section of
the road with the driver's steering wheel movements. The driver is alerted if the vehicle does
not follow the carriageway evenly.
NOTE
The function must not be used to extend a
driving stint. Always plan breaks at regular
intervals and ensure that you are fully
rested.
Limitation
In some cases the system may issue a warning
despite driving ability not deteriorating, for
example:
• if the driver tests the LDW function.
• in strong side winds.
• on rutted road surfaces.
The camera sensor has certain limitations,
see page 181.
``
* Option/accessory, for more information, see Introduction.
185
04 Comfort and driving pleasure
Driver Alert System – DAC*
Operation
Thumbwheel. Turn until the display shows
Driver
Alert. The second row displays the Off, U
navailable or Level mark options.
Some settings are made from the centre console display and its menu system. For information on how the menu system is used, see
page 124.
The current status can be checked on the trip
computer display with the left-hand stalk
switch.
04
READ confirms or clears a warning in the
memory.
If the vehicle is driven inconsistently then the
driver is alerted by an acoustic signal as well as
the text message Driver Alert Time for a
break. The warning is repeated after a time if
driving ability does not improve.
WARNING
Activating Driver Alert Control
Using the centre console display with its menu
system, search and locate Car settings
Driver Alert. Select the On option.
The function is activated when speed
exceeds 65 km/h and remains active
as long as the speed is over
60 km/h.
The display shows a level mark with 1-5 bars,
where a low number of bars indicates inconsistent driving style. A high number of bars
indicates stable driving.
An alarm should be taken very seriously, as
a sleepy driver is often not aware of his/her
own condition.
In the event of an alarm or a feeling of tiredness; stop the car in a safe manner as soon
as possible and rest.
Studies have shown that it is equally as dangerous to drive while tired as it is under the
influence of alcohol.
Symbols and messages in the display
Symbol
186
Message
Specification
Driver Alert OFF
Function not switched on.
Driver Alert Unavailable
The carriageway does not have clear side markings or the camera sensor is temporarily disengaged.
Read about the limitations of the camera sensor, see page 181.
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Driver Alert System – DAC*
Symbol
Message
Specification
Driver Alert
The function analyses the driver's driving style.
The number of bars can vary in the range 1-5, where a low number of bars indicates inconsistent
driving ability. A high number of bars indicates stable driving.
Driver Alert Time for a
break
The vehicle has been driven inconsistently - the driver is alerted by an acoustic warning signal + text.
Windscreen Sensors
blocked
The camera sensor is temporarily disengaged.
04
Shown in the event of snow, ice or dirt on the windscreen for example.
• Clean the windscreen surface in front of the camera sensor.
Read about the limitations of the camera sensor, see page 181.
Driver Alert Sys Service
required
The system is disengaged.
• Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
* Option/accessory, for more information, see Introduction.
187
04 Comfort and driving pleasure
Driver Alert System - LDW*
General information on Lane Departure
Warning - LDW
Operation and function
If the camera can no longer detect the carriageway's side markings the display shows
Lane Depart Warn Unavailable.
If speed decreases to below 60 km/h then the
function resumes standby mode and the display shows Lane Depart Warn Standby
<65 km/h.
If the vehicle crosses the left or right-hand side
marking of the carriageway without due cause
then the driver is alerted by an acoustic signal.
04
No warning is given in the following situations:
The function is intended to reduce the risk for
single-vehicle accidents – accidents where, in
certain situations, the vehicle leaves the carriageway and is in danger of driving either into
a ditch or into oncoming traffic.
LDW consists of a camera that detects the side
markings painted on the carriageway. The
driver is alerted by an acoustic signal if the
vehicle crosses a side marking.
1
188
The function is switched on or off by means of
a switch on the centre console. An indicator
lamp in the button illuminates when the function is switched on.
• Direction indicators activated
• The driver has his/her foot on the brake
pedal1
• In the event of the accelerator pedal being
depressed rapidly1
The trip computer display shows Lane Depart
Warn Standby <65 km/h when the function is
in standby mode due to speed being below 65
km/h.
• In the event of rapid steering wheel move-
The LDW function is activated automatically
from standby mode after the camera has scanned in the carriageway's side markings and
speed exceeds 65 km/h. The trip computer
display then shows Lane Depart Warn
Available.
The camera sensor also has certain limitations.
For more information, see page 181.
A warning is still given when Increased sensitivity is selected, see page 190.
* Option/accessory, for more information, see Introduction.
ments1
• In the event of a sudden turn so that the car
rolls.
04 Comfort and driving pleasure
Driver Alert System - LDW*
NOTE
The driver is only warned once each time the
wheels cross a line. So there is no acoustic
alarm when there is a line between the car's
wheels.
Symbols and messages in the display
Symbol
Message
Specification
Lane departure warning
On/Off
The function is switched on/off.
04
Shown at switch-on/off.
The text disappears after 5 seconds.
Lane Depart Warn Standby
<65 km/h
The function is set in standby mode due to speed being lower than 65 km/h.
Lane Depart Warn Unavailable
The carriageway does not have clear side markings or the camera sensor is temporarily disengaged.
Read about the limitations of the camera sensor, see page 181.
Lane Depart Warn Available
The function scans the carriageway's side markings.
``
* Option/accessory, for more information, see Introduction.
189
04 Comfort and driving pleasure
Driver Alert System - LDW*
Symbol
Message
Specification
Windscreen Sensors
blocked
The camera sensor is temporarily disengaged.
Shown in the event of snow, ice or dirt on the windscreen for example.
• Clean the windscreen surface in front of the camera sensor.
Read about the limitations of the camera sensor, see page 181.
Driver Alert Sys Service
required
The system is disengaged.
• Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
04
Personal preferences
See the centre console display with its menu
system and there search for Car settings
Lane departure warning, see page 125.
Select from the options:
On at start up - This option sets the function
in standby mode each time the engine is
started. Otherwise the same value as when the
engine was switched off is obtained.
Increased sensitivity – This option increases
sensitivity, an alarm is triggered earlier and
fewer limitations apply.
190
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
Park assist syst*
General
Function
1
Parking assistance is used as an aid to parking.
An acoustic signal as well as symbols on the
centre console display indicate the distance to
the detected obstacle.
Active
2
Parking assistance is available in two variants:
Active
• Rear only
• Both front and rear.
3
WARNING
•
Parking assistance does not relinquish
the driver's own responsibility during
parking.
•
The sensors have blind spots where
obstacles cannot be detected.
•
Be aware of e.g. people or animals near
the car.
Active
04
Display screens in different situations.
The system is automatically activated when the
car is started and the switch's On/Off lamp is
illuminated. If parking assistance is switched
off with the button, the lamp goes out.
Display in a car with rear sensors only obstacle detected by both right-hand sensors.
Display in a car with front and rear sensors
- right-hand front sensor is 30 cm or closer
to a detected obstacle.
Display in a car with front and rear sensors
- no obstacle front or rear detected.
The centre console display shows an overview
of the relationship between the car and
detected obstacle.
Marked sectors show which of the four sensor(s) detected an obstacle. The more marked
fields in the same sector, the shorter the distance between the car and detected obstacle.
``
* Option/accessory, for more information, see Introduction.
191
04 Comfort and driving pleasure
Park assist syst*
The frequency of the signal increases the
shorter the distance to an obstacle, in front of
or behind the car. Other sound from the audio
system is muted automatically.
When the distance is within 30 cm the tone is
constant and the marked sensors' bar is fully
filled in, see figure (2). If the detected obstacle
is within the distance for the constant tone both
behind and in front of the car, then the tone
sounds alternately from the loudspeakers.
04
The system must be deactivated when reversing with a trailer or bike carrier on the towbar
or similar - otherwise they would trigger the
sensors.
NOTE
NOTE
Rear parking assistance is deactivated
automatically when towing a trailer if Volvo
genuine trailer wiring is used.
Front parking assistance
Rear parking assistance
in order to indicate that the system is activated.
When the speed is below 10 km/h the system
is reactivated.
Front parking assistance is deactivated
when the parking brake is applied or P mode
is selected in a car with an automatic gearbox.
IMPORTANT
When fitting auxiliary lamps: Remember that
they must not obscure the sensors – the
auxiliary lamps could then be detected as
obstacles.
G021423
G021424
Fault indicator
The distance covered to the rear of the car is
about 1.5 metres. The acoustic signal for
obstacles behind comes from one of the rear
loudspeakers.
Rear parking assistance is activated when
reverse gear is engaged.
192
The distance covered in front of the car is about
0.8 metres. The acoustic signal for obstacles in
front comes from one of the front loudspeakers.
Front parking assistance is active up to
15 km/h. The lamp in the button is illuminated
* Option/accessory, for more information, see Introduction.
If the information symbol illuminates
with constant glow and the information display shows Park assist syst Service
required then parking assistance is disengaged.
04 Comfort and driving pleasure
Park assist syst*
IMPORTANT
In certain conditions the parking assistance
system may produce incorrect warning signals that are caused by external audio
sources that emit the same ultrasonic frequencies that the system works with.
G021425
Examples of such sources include horns,
wet tyres on asphalt, pneumatic brakes and
exhaust noises from motorcycles etc.
Cleaning the sensors
04
Sensor location, rear.
The sensors must be cleaned regularly to
ensure that they work properly. Clean them
with water and car shampoo.
NOTE
Dirt, ice and snow covering the sensors may
cause incorrect warning signals.
Sensor location, front.
* Option/accessory, for more information, see Introduction.
193
04 Comfort and driving pleasure
BLIS* – Blind Spot Information System
General information on BLIS
WARNING
Blind spots
The system is a supplement to, not a
replacement for, a safe driving style and use
of the rearview mirrors. It can never replace
the driver's attention and responsibility. The
responsibility for changing lanes safely
always rests with the driver.
G021426
04
BLIS camera
The system is designed to work most effectively when driving in dense traffic on multi-lane
highways.
When a camera (1) has detected a vehicle
inside the blind spot zone the indicator lamp (2)
illuminates with a constant glow.
Indicator lamp
NOTE
BLIS symbol
BLIS is an information system based on camera technology that under certain conditions
can help the driver to notice vehicles moving in
the same direction as the host vehicle in the socalled "blind spot".
Activating/deactivating
The lamp illuminates on the side of the car
where the system has detected the vehicle.
If the car is overtaken on both sides at the
same time then both lamps illuminate.
BLIS advises the driver with a message if a fault
arises in the system. If for example the system's cameras are obscured then the BLIS
indicator lamp flashes and a message is shown
on the information display. In such cases,
check and clean the lenses.
If necessary, the system can be switched off
temporarily, see the section Activate/deactivate.
194
A = approx. 9.5 m and B = approx. 3 m
* Option/accessory, for more information, see Introduction.
Button for activating/deactivating.
04 Comfort and driving pleasure
BLIS* – Blind Spot Information System
BLIS is activated when the engine is started.
The indicator lamps in the door panels flash
three times when BLIS is activated.
The system can be deactivated/activated after
starting the engine with one press on the
BLIS button.
When BLIS is deactivated, the lamp in the button goes out and a message is shown in the
instrument panel display.
When BLIS is activated the light in the button
illuminates, a new text message is shown on
the display and the indicator lamps in the door
panels flash 3 times. Press the READ button to
delete the text message. (For a description of
messages, see page 128).
When BLIS operates
The system operates when the car is driven at
a speed above 10 km/h.
Overtaking
Cleaning
WARNING
BLIS does not work in sharp bends.
BLIS does not work when the car is reversing.
A wide trailer coupled to the car can conceal
other vehicles in adjacent lanes. It can prevent the vehicle in the screened area from
being detected by BLIS.
Daylight and darkness
In daylight the system reacts to the shape of
the surrounding vehicles. The system is
designed to detect motor vehicles such as
cars, trucks, buses and motorcycles.
In darkness the system reacts to the headlamps of surrounding vehicles. If the headlamps of surrounding vehicles are not switched
on then the system does not detect the vehicles. This means for example that the system
does not react to a trailer without headlamps
which is towed behind a car or truck.
The system is designed to react if:
• you overtake another vehicle at a speed of
up to 10 km/h faster than the other vehicle
• you are overtaken by a vehicle travelling up
to 70 km/h faster than you are travelling.
WARNING
The system does not react to cyclists or
moped riders.
In order to work most effectively the BLIS camera lenses must be clean. The lenses can be
cleaned with a soft cloth or damp sponge.
Clean the lenses carefully so that they are not
scratched.
IMPORTANT
The lenses are electrically heated to melt ice
or snow. If necessary, brush snow away
from the lenses.
04
Messages on the display
Message
Specification
Blind-spot info
system ON
The BLIS system is
activated.
Blind spot syst.
Service required
Blind spot syst. disengaged - contact a
workshop.
Blind spot syst.
Camera blocked
The BLIS camera is
blocked by dirt,
snow or ice - clean
the lenses.
The BLIS cameras have limitations similar to
those of the human eye, i.e. they do not
"see" as well e.g. in heavy snowfall, against
strong light or in thick fog.
``
* Option/accessory, for more information, see Introduction.
195
04 Comfort and driving pleasure
BLIS* – Blind Spot Information System
Message
Specification
Blind spot syst.
Reduced function
Reduced function in
the data transmission between the
BLIS system's camera and the car's
electrical system.
The camera resets
itself when the data
transmission
between the BLIS
system's camera
and the car's electrical system returns to
normal.
04
Blind-spot info
system OFF
The BLIS system is
deactivated.
Limitations
In some situations the BLIS indicator lamp may
illuminate despite there being no other vehicle
within the blind spot.
NOTE
If the BLIS indicator lamp illuminates on isolated occasions despite there being no
other vehicle within the blind spot then this
does not mean that a fault has arisen in the
system.
In the event of a fault in the BLIS system the
display shows the text Blind spot syst.
Service required.
Here are several examples of situations where
the BLIS indicator lamp may illuminate even if
there is no other vehicle within the blind spot.
Low stationary sunlight shining into the camera.
IMPORTANT
Repair of the BLIS system components
must only be performed by a workshop - an
authorised Volvo workshop is recommended.
Reflection from shiny wet road surface.
196
Own shadow on large light smooth surface, e.g.
noise barrier or concrete road surface.
* Option/accessory, for more information, see Introduction.
04 Comfort and driving pleasure
BLIS* – Blind Spot Information System
04
* Option/accessory, for more information, see Introduction.
197
04 Comfort and driving pleasure
Comfort inside the passenger compartment
Storage spaces
04
198
04 Comfort and driving pleasure
Comfort inside the passenger compartment
Storage compartment in door panel
Tunnel console
out the lighter and light a cigarette on the
heated coils.
Storage pocket* on front edge of front seat
cushions
Glovebox
Ticket clip
Glovebox
Storage compartment, cup holder
Jacket holder
Cup holder* in armrest, rear seat
04
Storage pocket
Jacket holder
The jacket holder is only designed for light
clothing.
WARNING
Keep loose objects such as mobile phones,
cameras, remote controls for accessories,
etc. in the glove compartment or other compartments. Otherwise they may injure people in the car in the event of sudden braking
or a collision.
Storage compartment (e.g. for CD discs),
input for AUX and USB*1 (e.g. iPodŸ) under
the armrest.
Includes cup holder for driver and passenger as well as 12 V socket and small compartment. (If ashtray and cigarette lighter
are specified then there is a cigarette
lighter in the 12 V socket and a detachable
ashtray in the small compartment.)
The owner's manual and maps can be kept
here for example. There are also holders for
pens on the inside of the lid. The glovebox can
be locked with the key blade, see page 43.
Cigarette lighter and ashtray*
The ashtray in the tunnel console is detached
by lifting the tray straight up.
Activate the lighter by pushing in the button.
The button pops out when the lighter is hot. Pull
1
For RSE* the USB input is in a different location, see page 142.
``
* Option/accessory, for more information, see Introduction.
199
04 Comfort and driving pleasure
Comfort inside the passenger compartment
Inlaid mats*
12 V socket
socket to supply current, the remote control
key must be in at least key position I, see
page 69.
Volvo supplies specially manufactured inlay
mats.
IMPORTANT
WARNING
Max. socket is 10 A (120 W) if one socket is
used at a time. If both sockets are used
simultaneously, 7.5 A (90 W) per socket is
applicable.
04
G021439
Before setting off check that the inlaid mat
in the driver area is firmly affixed and
secured in the pins in order to avoid getting
caught adjacent to and under the pedals.
Vanity mirror
WARNING
Always leave the plug in the socket when
the socket is not in use.
12 V socket in tunnel console, front seat.
G021440
G021438
NOTE
Vanity mirror with lighting.
The light illuminates automatically when the
cover is lifted.
12 V socket in tunnel console, rear seat.
The electrical socket can be used for various
accessories designed for 12 V, e.g. TV screens,
music players and mobile phones. For the
200
* Option/accessory, for more information, see Introduction.
Optional equipment and accessories - e.g.
TV screens, music players and mobile
phones - which are connected to one of the
passenger compartment's 12V electrical
sockets, could be activated by the climate
control system, even when the remote control key has been removed or when the car
is locked, for example, when the parking
heater is activated at a preset time.
For this reason remove the plugs from the
electrical sockets for optional equipment or
accessories when not in use because the
battery could be drained in the event of such
an occurrence!
04 Comfort and driving pleasure
Comfort inside the passenger compartment
Electrical socket in cargo area*
For more information, see page 223.
04
* Option/accessory, for more information, see Introduction.
201
04 Comfort and driving pleasure
Comfort inside the passenger compartment - Executive
There is a cooler box behind the armrest in the
rear seat. The cooler box works when the
engine is running or the remote control key is
in position II.
WARNING
Store bottles well sealed in the cooler box
and make sure that the door is closed for the
journey.
NOTE
The cooler box needs to have free circulation of air for optimum function. For this reason you should leave at least 5 cm of space
at the air intake for the cooler box in the
cargo area.
202
Glass
NOTE
The rear seat must be folded forward slightly
in cars with refrigerator before the cargo
area mat can be removed. Fold the backrest
forward by pulling the handle, see page 73.
G021859
G021857
04
Mat in cargo area
G021858
Cooler box
There is a storage compartment for two
glasses and a bottle opener under the cover in
the armrest.
WARNING
Store glasses in the storage compartment
or in cup holders and make sure that the
armrest cover is closed for the journey.
04 Comfort and driving pleasure
Bluetooth handsfree*
General
NOTE
Only a selection of mobile phones are fully
compatible with the handsfree function.
Volvo recommends that you seek assistance from an authorised Volvo dealer or
visit www.volvocars.com for information on
compatible phones.
Phone functions, controls overview
The menus are controlled from the centre console and the steering wheel keypad. For general information on menus, see page 124.
Mobile phone
04
NOTE
Microphone
If the car is equipped with both
BluetoothTM handsfree and built-in phone
then there is an additional menu (for changing the phone) in the phone menu, see
page 125.
Steering wheel keypad
Centre console
A mobile phone equipped with BluetoothTM
can be connected wirelessly to the audio system. The audio system then works handsfree,
with the option to control a range of the mobile
phone's functions remotely. The mobile phone
can be operated by its own keys irrespective of
whether or not it is connected.
ENTER – Accept calls. A press of the button reveals latest dialled numbers. Same
functionality available in steering wheel
keypad.
Remember
System overview.
BluetoothTM
EXIT - End/refuse phone calls, clear
entered characters, interrupt current function. Same functionality available in steering wheel keypad.
Centre console control panel.
Activating/deactivating
VOLUME – Same functionality available in
steering wheel keypad.
Number and letter buttons
PHONE - On/off and standby mode
Navigation button
A short press on PHONE activates the handsfree function. The text PHONE at the top of the
display shows that it is in phone mode. The
symbol
shows that the handsfree function is active.
One long press on PHONE deactivates the
handsfree function and disconnects a connected phone.
``
* Option/accessory, for more information, see Introduction.
203
04 Comfort and driving pleasure
Bluetooth handsfree*
Connect mobile phone
A mobile phone is connected in different ways
depending on whether or not it has been connected previously. To connect a mobile phone
for the first time, follow one of the sets of
instructions below:
Alternative 1 - via the car's menu system
04
1. Make the mobile phone detectable/visible
via BluetoothTM, see mobile phone manual
or www.volvocars.com.
2. Activate the handsfree function with
PHONE.
> Menu option Add phone appears on
the display. If one or more mobile
phones have already been registered
then these are also shown.
3. Select Add phone.
> The audio system searches for mobile
phones in the vicinity. The search takes
approximately 30 seconds. The mobile
phones detected are specified with their
respective BluetoothTM name in the display. The handsfree function's
BluetoothTM name is shown in the
mobile phone such as My Car.
1
204
4. Choose one of the mobile phones in the
audio system display.
the mobile phone can be controlled from the
audio system.
5. Enter the number series shown in the audio
system display via the mobile phone keypad.
To call
Alternative 2 - via the phone's menu system
1. Make sure that the text PHONE is shown
at the top of the display and that the
symbol is visible.
1. Activate the handsfree function with
PHONE. If there is a phone connected,
disconnect the connected phone.
2. Dial the number or use the phone book,
see page 206.
2. Search with the phone's BluetoothTM, see
the mobile phone manual.
The call is interrupted with EXIT.
3. Select My Car in the list of units detected
in your mobile phone.
4. Enter the PIN code '1234' into the mobile
phone when prompted for the PIN code.
5. Select to connect to My Car from the
mobile phone.
The mobile phone is registered and connected
automatically to the audio system while the text
Synchronising is shown in the display. For
more information on how mobile phones are
registered, see page 206.
When the connection is established the symbol
is shown and the mobile phone
BluetoothTM name is shown in the display. Now
Only Keyless Drive.
* Option/accessory, for more information, see Introduction.
3. Press ENTER.
Disconnecting the mobile phone
Automatic disconnection takes place if the
mobile phone moves out of the audio system's
range. For more information on connection,
see page 206.
Manual disconnection takes place by deactivating the handsfree function with one long
press on PHONE. The handsfree function is
also deactivated when the engine is switched
off or when a door is opened1.
When the mobile phone has been disconnected an ongoing call can be continued with
the mobile phone's built-in microphone and
speaker.
04 Comfort and driving pleasure
Bluetooth handsfree*
NOTE
Some mobile phones require that the
changeover from handsfree is confirmed
from the phone's keypad.
Making and receiving calls
Incoming call
Calls are accepted with ENTER even if the
audio system is in CD or FM mode for example.
Refuse or end with EXIT.
Automatic answer
NOTE
With certain mobile phones the connection
is terminated when the privacy function is
used. This is normal. The handsfree function
asks if you want to reconnect.
book.
Phone call volume
In call menu
Press MENU or ENTER during an ongoing call
to access the following functions:
• Mute microphone - audio system microphone is muted.
• Transfer call to mobile - the call is transferred to the mobile phone.
2
The handsfree function has integrated ring signals that can be selected under Phone
settings Sounds and volume Ring
signals Ring signal 1 etc.
A new call cannot be started during an
ongoing call.
Audio settings
Activate/deactivate under Call options
Automatic answer.
Ring signals
NOTE
Ring volume
Go to Phone settings Sounds and volume
Ring volume and adjust with
/
on the
navigation button.
• Phone book – searching in the phone
The automatic answer function means that
calls are accepted automatically.
The audio source can be automatically muted
for incoming calls under Phone settings
Sounds and volume Mute radio.
04
NOTE
The call volume can be regulated when the
handsfree function is in phone mode. Use the
steering wheel keypad or VOLUME.
Audio system volume
Providing there is no ongoing call taking place,
the audio system volume is controlled as usual
with VOLUME. In order to control audio system
volume during an ongoing call you have to
switch to one of the audio sources.
The connected mobile phone's ring signal is
not deactivated when one of the handsfree
system's integrated signals is used.
In order to select the connected phone's ring
signal2, go to Phone settings Sounds and
volume Ring signals Use mobile
phone signal.
Not supported by all mobile phones.
``
* Option/accessory, for more information, see Introduction.
205
04 Comfort and driving pleasure
Bluetooth handsfree*
More on registering and connecting
A maximum of five mobile phones can be registered. Registration is performed once per
phone. After registration the phone no longer
needs to be visible/detectable. A maximum of
one mobile phone can be connected at a time.
Phones can be deregistered under Bluetooth
Remove phone.
Automatic connection
04
BluetoothTM handsfree or if the car also has a
built-in phone.
• For cars with only BluetoothTM handsfree
the connection is made under Main menu
Bluetooth Bluetooth Connect
phone or Main menu Bluetooth
Bluetooth Change phone Add
phone.
• For cars with built-in phone and
BluetoothTM handsfree the connection is
made under Main menu Bluetooth
Bluetooth Connect phone or Main
menu Bluetooth Change phone
Add phone.
When the handsfree function is active and the
last mobile phone connected is in range it is
connected automatically. When the audio system searches for the last phone connected its
name is shown in the display. To change over
to manual connection of another phone, press
EXIT.
Phone book
Manual connection
If you want to connect a mobile phone other
than the last connected or change the connected mobile phone, proceed as follows:
1. Set the audio system in phone mode.
2. Press PHONE and select one of the
phones in the list.
The connection can also be made via the menu
system.
All use of the phone book presupposes that the
text PHONE is shown at the top of the display
and that the
symbol is visible.
The audio system stores a copy of the phone
book from each registered mobile phone. The
phone book is copied automatically to the
audio system during each connection.
The menu structure is available in two variants
depending on whether the car only has
206
* Option/accessory, for more information, see Introduction.
Deactivate the function under Phone
settings Synchronise phone book.
Searching for contacts is only performed in
the connected mobile phone's phone
book.
NOTE
If the mobile phone does not support copying of the phone book then List is empty is
shown when copying is finished.
If the phone book contains a ringing caller's
contact information then this is shown in the
display.
Searching for contacts
The easiest way to search in the phone book is
with long presses on the keys 2–9. This starts
a search in the phone book based on the key's
first letter.
The phone book can also be reached with
/
on the navigation button or with
/
on
the steering wheel keypad. The search can also
be performed from the phone book's Search
menu under Phone book Search:
1. Enter the first few letters of the contact and
press ENTER, or simply press ENTER.
2. Scroll to a contact and press ENTER to
call.
Voice recognition
The mobile phone's voice recognition function
for dialling can be used by holding in ENTER.
04 Comfort and driving pleasure
Bluetooth handsfree*
NOTE
Only a selection of mobile phones are fully
compatible with the voice recognition function. Volvo recommends that you contact an
authorised Volvo dealer or visit
www.volvocars.com for information on
compatible phones.
Voice mail number
Voice mail number can be changed under Call
options Voice mail number. If there is no
number stored then this menu can be reached
with one long press on 1. Press 1 for a long time
to use the stored number.
twice for the second etc. Continue pressing for
more characters, see the following table.
A short press on EXIT deletes an input character. One long press on EXIT clears all input
characters.
/
on the navigation button
scrolls between the characters.
Key
Function
Space . 1 - ? ! , : " ' ( )
Key
Function
Pressed briefly if two characters
shall be entered after each other
with the same key.
[email protected]*#&$£/%
Shift between upper and lower
case letter
04
ABC2ÄÅÀÆÇ
DEF3ÈÉ
Call lists
The call lists are copied to the handsfree function at each new connection and are then
updated during the connection. Press ENTER
to show the last dialled. Other call lists are
available under Call register.
GHI4Ì
JKL5
MNO6ÑÖÒØ
NOTE
Certain mobile phones show a list of the last
dialled numbers in reverse order.
PQRS7ß
TUV8ÜÙ
Inputting text
Input text using the keypad in the centre console. Press once for the key's first character,
WXYZ9
* Option/accessory, for more information, see Introduction.
207
04 Comfort and driving pleasure
Built-in phone*
General
Remember
SIM card
The phone can only be used with a valid SIM
card Subscriber Identity Module. For installation, see page 211. Emergency calls to emergency numbers can be made without a SIM
card.
NOTE
04
System overview.
The built-in phone cannot read 3G type SIM
cards. Combined 3G/GSM cards work.
Contact the network operator if the SIM
card needs to be changed.
Microphone
SIM card reader
Keypad, see page 142.
Control panel
Privacy handset*
Menus and controls
The menus are navigated using the control
panel (4) and the steering wheel keypad (3). For
general information on menus, see page 124.
For information on the phone's controls, see
page 203.
NOTE
Safety
Engage a workshop to perform the service via
the phone. Volvo recommends that you seek
assistance from an authorised Volvo workshop. The built-in phone must be switched off
during refuelling or in the vicinity of blasting
work. IDIS limits the menu system depending
on the speed of the car, see page 210.
208
If the car is equipped with both
BluetoothTM handsfree and built-in phone
then there is an additional menu (for changing the phone) in the phone menu, see
page 125.
* Option/accessory, for more information, see Introduction.
On/Off
Switch on the phone with a short press on
PHONE. Enter the PIN code if necessary. The
symbol shows that the phone is switched
on. When this symbol is shown calls can be
received even if the CD menu for example is
shown in the display. Briefly press PHONE to
use the phone menus and to dial out. The text
PHONE shows that the phone menu is active.
Switch off the phone with one long press on
PHONE.
Making and receiving calls
Making calls
1. Switch on the phone.
2. If PHONE is not shown in the display,
briefly press PHONE.
3. Dial the number or use the phone book,
see page 209.
4. Press ENTER for handsfree calls or pick up
the privacy handset*. Release the handset
by pulling it down.
Ending a call
End a call by pressing EXIT or by hanging up
the privacy handset*.
04 Comfort and driving pleasure
Built-in phone*
Incoming call
During a call
Press ENTER for handsfree calls or pick up the
privacy handset*. If the privacy handset* is off
the hook when the phone rings then calls must
be received using ENTER.
Press MENU or ENTER during a call to access
the In-call menu.
End calls by pressing EXIT or by hanging up
the privacy handset*. Refuse calls using EXIT.
Automatic answer
See page 205.
Call waiting
The function enables a new call to be answered
during an ongoing call. The new call is
answered as usual and the previous call is put
on hold.
Activate/deactivate under Call options
Call waiting.
Automatic diversions
Incoming calls can be diverted automatically
depending on the type of call and situation.
Activate/deactivate under Call options
Diversions.
To call
Activate/deactivate the microphone using
the Microphone on/Mute microphone
menu option.
Audio settings
1. Put the call on hold under Hold.
2. Dial the number of the third party or use the
Phone book menu option.
Switch between calls using the Swap menu
option.
Conference call
A conference call consists of several parties. It
can be initiated when a call is underway and
another is on hold. The Join menu option starts
the conference call.
Phone call volume
The phone uses the front door speakers. Call
volume can be controlled when the text
PHONE is shown at the top of the display.
Use the steering wheel keypad or
VOLUME.
Audio system volume
See page 143.
Signals and volume
All ongoing calls are disconnected if the conference call is terminated.
Change the ring signal under Phone settings
Sounds and volume Ring signals.
Switching between the privacy handset*
and handsfree
Activate/deactivate the message beep under
Phone settings Sounds and volume
Message beep.
Switch from handsfree to the privacy handset* by picking up the privacy handset or
selecting in the menu.
Switch from the privacy handset* to handsfree
using the Handsfree menu option.
04
Control the ring volume under Phone settings
Sounds and volume Ring volume.
Adjust using
/
on the navigation button.
Mute mode
Mute mode involves deactivating the microphone, see page 208.
``
* Option/accessory, for more information, see Introduction.
209
04 Comfort and driving pleasure
Built-in phone*
Phone book
Voice mail number
Message settings
Contact information can be stored on the SIM
card or in the phone.
See page 207.
Message settings are not normally changed.
The network provider has further information
on these settings. There are three options
under Messages Message settings:
Storing contacts in the phone book
1. Press MENU and scroll to Phone book
New contact.
2. Enter a name and press ENTER. For information on text input, see below.
04
3. Enter a number and press ENTER.
4. Scroll to SIM card or Phone memory and
press ENTER.
IDIS
IDIS (Intelligent Driver Information System)
can, in active driving situations, delay or refuse
ring signals from incoming calls. This way less
attention is distracted from driving.
IDIS is deactivated under Phone settings
IDIS.
See page 207.
1. Scroll to Messages
ENTER.
Searching for contacts
2. Scroll to a message and press ENTER.
See page 206.
Erasing contacts
Erase a contact in the phone book by selecting
it and pressing ENTER. Then scroll to Erase
and press ENTER.
Erase all contacts under Phone book
SIM or Erase phone.
Erase
Copying entries between the SIM card
and the phone book
Go to Phone book Copy all SIM to
phone or Phone to SIM and press ENTER.
Read and press
3. The message text is shown in the display.
Additional selections can be made by
pressing ENTER.
Writing and sending messages
1. Scroll to Messages
press ENTER.
Write new and
2. Enter text and press ENTER. For information on text input, see page 207.
3. Scroll to Send and press ENTER.
4. Enter a phone number and press ENTER.
* Option/accessory, for more information, see Introduction.
• SMSC number - Specifies the message
centre which will transfer the messages.
•
Validity time - Specifies how long the
message will be stored in the message
centre.
• Message type.
Call lists
Reading messages
Inputting text
210
Other functions and settings
Lists of received, dialled and missed calls are
stored in Call register. Dialled calls are also
shown by pressing ENTER. The phone numbers in the lists can be saved in the phone
book.
Call duration
Call duration is stored under Call register
Call duration.
Reset the values under Call register
Call duration Reset timers.
Show/hide number for third party
The phone number can be temporarily hidden
under Call options Send my number.
04 Comfort and driving pleasure
Built-in phone*
In order to block a phone the network provider
must be advised of the phone's IMEI number.
Select minimum security with the Off option.
The SIM card can then be used without the
code at all.
Reset to factory settings
IMEI number
Dial *#06# to show the number in the display. Write it down and keep it in a safe
place.
The phone settings are fully reset under Phone
settings Reset Phone settings.
Network selection
Installing the SIM card
G021451
The network can be selected either automatically or manually under Phone settings
Network selection.
SIM code and security
Make sure that the phone is deactivated.
Pull out the SIM card holder which is
located in the glovebox.
The PIN code can protect the SIM card from
unauthorised use.
The code can be changed under Phone
settings Edit PIN code.
Place the SIM card with the metal surface
visible
and fit the cover on the SIM card
. Refit the SIM card holder.
holder
G021450
Change the security level under Phone
settings SIM security.
04
Select maximum security with the On option.
The code will then need to be entered each
time the phone is switched on.
Select the next highest security level with the
Automatic option. The phone then stores the
code and automatically specifies it when the
phone is switched on. When the SIM card is
used with another phone the code must be
entered manually.
* Option/accessory, for more information, see Introduction.
211
Recommendations during driving.........................................................
Refuelling..............................................................................................
Fuel.......................................................................................................
Loading.................................................................................................
Cargo area ...........................................................................................
Driving with a trailer..............................................................................
Towing and recovery.............................................................................
212
214
217
218
222
224
225
231
DURING YOUR JOURNEY
05 During your journey
Recommendations during driving
General
For more information and further advice, see
page 11.
Economical driving
Driving economically means driving smoothly
while thinking ahead and adjusting your driving
style and speed to the prevailing conditions.
• Drive in the highest gear possible, adapted
to the current traffic situation and road lower engine speeds result in lower fuel
consumption.
• Avoid driving with open windows.
• Avoid sudden unnecessary acceleration
and heavy braking.
• Remove unnecessary items from the car 05
the greater the load the higher the fuel consumption.
• Use engine braking to slow down, when it
can take place without risk to other road
users.
• A roof load and ski box increase air resistance, leading to higher fuel consumption
- remove the load carriers when not in use.
• Do not run the engine to operating temperature at idling speed, but rather drive
with a light load as soon as possible - a
cold engine consumes more fuel than a
warm one.
• Cars with the D5 engine and 6-speed manual transmission are started in 2nd gear
under normal conditions on level ground.
214
WARNING
Never switch off the engine while moving,
such as downhill, this deactivates important
systems such as the power steering and
brake servo.
Driving in water
The car can be driven through water at a maximum depth of 25 cm at a maximum speed of
10 km/h. Extra caution should be exercised
when passing through flowing water.
During driving in water, maintain a low speed
and do not stop the car. When the water has
been passed, depress the brake pedal lightly
and check that full brake function is achieved.
Water and mud for example can make the
brake linings wet resulting in delayed brake
function.
• Clean the electric contacts of the electric
engine block heater and trailer coupling
after driving in water and mud.
• Do not let the car stand with water over the
sills for any long period of time - this could
cause electrical malfunctions.
IMPORTANT
Engine damage can occur if water enters
the air filter.
In depths greater than 25 cm, water could
enter the transmission. This reduces the
lubricating ability of the oils and shortens
the service life of these systems.
In the event of the engine stalling in water,
do not try restart - tow the car from the water
to a workshop - an authorised Volvo workshop is recommended. Risk of engine
breakdown.
Engine, gearbox and cooling system
Under special conditions, for example hard
driving in hilly terrain and hot climate, there is
a risk that the engine and drive system may
overheat - in particular with a heavy load.
For information about overheating when driving with a trailer, see page 225.
• Remove any auxiliary lamps from in front
of the grille when driving in hot climates.
• If the temperature in the engine's cooling
system is too high the instrument panel's
warning symbol is illuminated and there is
a text message displayed there High
engine temp Stop safely - stop the car in
a safe way and allow the engine to run at
idling speed for several minutes to cool
down.
05 During your journey
Recommendations during driving
• If the text message High engine temp
•
•
•
Stop engine or Coolant level low, Stop
engine is shown then the engine must be
switched off after stopping the car.
In the event of overheating in the gearbox
a built-in protection function is activated
which, amongst other things, illuminates
the instrument panel's warning symbol and
there is a text message displayed there
Transmission hot Reduce speed or
Transmission hot Stop safely - follow
the recommendation given and lower the
speed and stop the car in a safe way and
allow the engine to run at idling speed for
a few minutes to allow the gearbox to cool
down.
If the car overheats, the air conditioning
may be switched off temporarily.
Do not turn the engine off immediately you
stop after a hard drive.
NOTE
It is normal for the engine's cooling fan to
operate for a while after the engine has been
switched off.
Open boot lid
WARNING
Do not drive with the boot lid open. Toxic
exhaust fumes can be drawn into the car
through the cargo area.
least 15 minutes - battery charging is more
effective during driving than running the
engine at idling speed while stationary.
Before a long journey
• Check that the engine is working normally
and that fuel consumption is normal.
• Make sure that there are no leaks (fuel, oil
Do not overload the battery
or other fluid).
The electrical functions in the car load the battery to varying degrees. Avoid using the key
position II when the engine is switched off.
Instead use the I mode - which uses less
power.
• Check all bulbs and tyre tread depths.
• Carrying a warning triangle is a legal
Also, be aware of different accessories that
load the electrical system. Do not use functions
which use a lot of power when the engine is
switched off. Examples of such functions are:
Check the following in particular before the
cold season:
•
•
•
•
ventilation fan
windscreen wiper
audio system (high volume)
headlamps.
If the battery voltage is low the information display shows the text Low battery Power save
mode. The energy-saving function then shuts
down certain functions or reduces certain
functions such as the ventilation fan and/or
audio system.
In which case, charge the battery by starting the engine and then running it for at
requirement in certain countries.
Winter driving
05
• The engine coolant must contain at least
50% glycol. This mixture protects the
engine against frost erosion down to
approximately –35 °C. To achieve optimum
antifreeze protection, different types of glycol must not be mixed.
• The fuel tank must be kept filled to prevent
condensation.
• Engine oil viscosity is important. Oils with
lower viscosity (thinner oils) facilitate starting in cold weather and also reduce fuel
consumption while the engine is cold. For
more information on suitable oils, see
page 296.
``
215
05 During your journey
Recommendations during driving
IMPORTANT
Low viscosity oil must not be used for hard
driving or in hot weather.
• The condition of the battery and charge
level must be inspected. Cold weather places great demands on the battery and its
capacity is reduced by the cold.
• Use washer fluid to avoid ice forming in the
washer fluid reservoir.
To achieve optimum roadholding Volvo recommends using winter tyres on all four wheels
if there is a risk of snow or ice.
05
NOTE
The use of winter tyres is a legal requirement
in certain countries. Studded tyres are not
permitted in all countries.
Slippery driving conditions
Practise driving on slippery surfaces under
controlled conditions to learn how the car
reacts.
216
05 During your journey
Refuelling
Refuelling
Opening the fuel filler flap manually
Opening/closing the fuel cap
G024631
Opening/closing the fuel filler flap
Open the fuel filler flap using the button on the
lighting panel - the flap opens when the button
is released.
The filler flap is located on the right-hand rear
wing, as indicated by the information display's
.
arrow by the symbol
Close the fuel filler flap by pressing it in until a
click confirms that it is closed.
The fuel filler flap can be opened manually
when electric opening from the passenger
compartment is not possible.
A certain overpressure may arise in the tank in
the event of high outside temperatures. Open
the cap slowly.
1. Open/remove the side hatch in the cargo
area (same side as fuel filler flap) and locate
the green cord with handle.
After refuelling, refit the cap and turn it until one
or more clicking sounds are heard.
2. Pull the cord gently straight back until the
fuel filler flap folds out with a "click".
IMPORTANT
Pull the wire gently - minimal force is
required to disengage the hatch lock.
05
Filling up with fuel
Do not overfill the tank but fill until the pump
nozzle cuts out.
NOTE
Excess fuel in the tank can overflow in hot
weather.
217
05 During your journey
Fuel
General information on fuel
Fuel of a lower quality than that recommended
by Volvo must not be used as engine power
and fuel consumption is negatively affected.
WARNING
Always avoid inhaling fuel vapour and getting fuel splashes in the eyes.
In the event of fuel in the eyes, remove any
contact lenses and rinse the eyes in plenty
of water for at least 15 minutes and seek
medical attention.
05
Never swallow fuel. Fuels such as petrol,
bioethanol and mixtures of them and diesel
are highly toxic and could cause permanent
injury or be fatal if swallowed. Seek medical
attention immediately if fuel has been swallowed.
WARNING
Fuel which spills onto the ground can be
ignited.
Switch off the fuel-driven heater before starting to refuel.
Never carry an activated mobile phone
when refuelling. The ring signal could cause
spark build-up and ignite petrol fumes,
leading to fire and injury.
218
IMPORTANT
Mixing different types of fuel or the use of
fuel not recommended invalidates Volvo's
guarantees, and any associated service
agreement. This applies to all engines.
NOTE: It does not apply to cars with engines
that are adapted to run on ethanol fuel (E85).
NOTE
Extreme weather conditions, driving with a
trailer or driving at high altitudes in combination with fuel grade are factors that could
affect the car's performance.
Catalytic converters
The purpose of the catalytic converters is to
purify exhaust gases. They are located close to
the engine so that operating temperature is
reached quickly.
The catalytic converters consist of a monolith
(ceramic or metal) with channels. The channel
walls are lined with a thin layer of platinum/rhodium/palladium. These metals act as catalysts,
i.e. they participate in and accelerate a chemical reaction without being used up themselves.
Lambda-sondTM oxygen sensor
The Lambda-sond is part of a control system
intended to reduce emissions and improve fuel
economy.
An oxygen sensor monitors the oxygen content
of the exhaust gases leaving the engine. This
value is fed into an electronic system that continuously controls the injectors. The ratio of fuel
to air directed to the engine is continuously
adjusted. These adjustments create optimal
conditions for efficient combustion, and
together with the three-way catalytic converter
reduce harmful emissions (hydrocarbons, carbon monoxide and nitrous oxides).
Petrol
Petrol must meet the EN 228 standard. Most
engines can be run with octane ratings of 95
and 98 RON. 91 RON should only be used in
exceptional cases.
• 95 RON can be used for normal driving.
• 98 RON is recommended for optimum performance and minimum fuel consumption.
When driving in temperatures above +38 °C,
fuel with the highest possible octane rating is
recommended for optimum performance and
fuel economy.
05 During your journey
Fuel
IMPORTANT
•
Always refuel with unleaded petrol so as
not to damage the catalytic converter.
•
Do not use additives not recommended
by Volvo.
Bioethanol E85
Do not modify the fuel system or its components, and do not replace components with
parts that are not specifically designed for use
with bioethanol.
WARNING
Methanol must not be used. A decal on the
inside of the fuel filler flap shows the correct
alternative fuel.
The use of components not designed for
bioethanol engines could cause fire, injury
or engine damage.
Reserve fuel can
The reserve fuel can should be filled with petrol,
see the NOTE box, page 103.
IMPORTANT
Make sure the reserve fuel can is securely
fastened and that its cap is sealed.
IMPORTANT
WARNING
Ethanol is sensitive to sparks, and explosive
gases could form in the reserve fuel can if it
is refuelled with ethanol.
Only ever use fuel that fulfils the European
diesel standard.
The sulphur content must be a maximum of
50 ppm.
Diesel
Diesel must fulfil the EN 590 or JIS K2204
standards. Diesel engines are sensitive to contaminants, such as excessively high volumes
of sulphur particles for example. Only use diesel fuel from well-known producers. Never use
diesel of dubious quality.
At low temperatures (-6 °C to -40 °C), a paraffin
precipitate may form in the diesel fuel, which
may lead to ignition problems. Special diesel
fuel designed for low temperatures around
freezing point is available from the major oil
companies. This fuel is less viscous at low temperatures and reduces the risk of paraffin precipitate.
The risk of condensation in the fuel tank is
reduced if the tank is kept well filled. When
1
refuelling, check that the area around the fuel
filler pipe is clean. Avoid spilling fuel onto the
paintwork. Wash off any spillage with detergent and water.
IMPORTANT
Diesel type fuels which must not be used:
•
•
•
•
Special additives
05
Marine Diesel Fuel
Fuel oil
RME1 (Rape Methyl Ester) and vegetable oil.
These fuels do not fulfil the requirements in
accordance with Volvo recommendations
and generate increased wear and engine
damage that is not covered by the Volvo
warranty.
Empty tank
The design of the fuel system in a diesel engine
means that if the vehicle runs out of fuel, the
Diesel fuel may contain a certain amount of RME, but further amounts must not be added.
``
219
05 During your journey
Fuel
tank may need to be vented in the workshop in
order to restart the engine after fuelling.
Once the engine has stopped due to fuel starvation, the fuel system needs a few moments
to carry out a check. Do this before starting the
engine, once the fuel tank has been filled with
diesel:
1. Place the remote key in the ignition switch
and push it gently so that it is pulled in (see
page 69).
2. Press the START button without depressing the brake and/or clutch pedal.
3. Wait approx. 1 minute.
05
4. To start the engine: Depress the brake and/
or clutch pedal and then press the
START button again.
Draining condensation from the fuel filter
The fuel filter separates condensation from the
fuel. Condensation can disrupt engine operation.
The fuel filter must be drained at the intervals
specified in the Service and Warranty Booklet
or if you suspect that the car has been filled
with contaminated fuel.
IMPORTANT
Certain special additives remove the water
separation in the fuel filter.
220
Diesel particle filter (DPF)
Diesel cars are equipped with a particle filter,
which results in more efficient emission control. The particles in the exhaust gases are collected in the filter during normal driving. Socalled "regeneration" is started in order to burn
away the particles and empty the filter. This
requires the engine to have reached normal
operating temperature.
Regeneration of the filter takes place automatically at an interval of approximately
300-900 km depending on driving conditions.
Regeneration normally takes 10-20 minutes. It
may take a little longer at a low average speed.
Fuel consumption may increase slightly during
regeneration.
Regeneration in cold weather
If the car is frequently driven short distances in
cold weather then the engine does not reach
normal operating temperature. This means that
regeneration of the diesel particle filter does
not take place and the filter is not emptied.
When the filter has become approximately
80% full of particles, a warning triangle on the
instrument panel illuminates, and the message
Soot filter full. See manual is shown on the
instrument panel display.
Start regeneration of the filter by driving the car
until the engine reaches normal operating temperature, preferably on a main road or motor-
* Option/accessory, for more information, see Introduction.
way. The car should then be driven for approximately 20 minutes more.
NOTE
A smaller reduction of engine power may be
noticed temporarily during regeneration.
When regeneration is complete the warning
text is cleared automatically.
Use the parking heater* in cold weather so that
the engine reaches normal operating temperature more quickly.
IMPORTANT
If the filter fills up with particles then it can
be difficult to start the engine and the filter
will be incapable of functioning. Then there
is a risk that the filter will have to be
replaced.
Fuel consumption
Fuel consumption figures may change if the car
is equipped with extra equipment that affects
the car's weight. See information about
weights, page 291.
The manner in which the car is driven, and
other non-technical factors can also affect fuel
consumption.
05 During your journey
Fuel
Consumption is higher and power output lower
for fuel with an octane rating of 91 RON.
NOTE
Extreme weather conditions, driving with a
trailer or driving at high altitudes in combination with fuel grade are factors that could
affect the car's performance.
05
221
05 During your journey
Loading
General information on loading
Payload depends on the car's kerb weight. The
total of the weight of the passengers and all
accessories reduces the car's payload by a
corresponding weight. For more detailed information on weights, see page 291.
The boot lid is opened via a button on
the lighting panel or the remote control key, see page 52.
WARNING
The car's driving characteristics change
depending on the weight and distribution of
the load.
05
To bear in mind when loading
• Position the load firmly against the backrest in front.
• Put wide loads in the centre.
• Heavy objects should be placed as low as
possible. Avoid placing heavy loads on
lowered backrests.
• Cover sharp edges with something soft to
avoid damaging the upholstery.
• Secure all loads to the load retaining eyelets with straps or web lashings.
222
WARNING
A loose object weighing 20 kg can, in a
frontal collision at a speed of 50 km/h, carry
the impact of an item weighing 1000 kg.
Front seat
The passenger seat backrest can also be
folded for an extra long load, see page 71.
Roof load
WARNING
Using load carriers
The protection provided by the inflatable
curtain in the headlining may be compromised or eliminated by high loads.
To avoid damaging the car and for maximum
possible safety while driving, the load carriers
designed by Volvo are recommended.
•
Never load cargo above the backrest.
Carefully follow the installation instructions
supplied with the carriers.
WARNING
• Check periodically that the load carriers
and load are properly secured. Lash the
load securely with retaining straps.
Always secure the load. During heavy braking the load may otherwise shift, causing
injury to the car's occupants.
• Distribute the load evenly over the load
Cover sharp edges and sharp corners with
something soft.
carriers. Put the heaviest objects at the
bottom.
Switch off the engine and apply the parking
brake when loading/unloading long items.
Otherwise you may accidentally knock the
gear lever or gear selector with the load into
a drive position - and the car could then
move off.
• The size of the area exposed to the wind,
and therefore fuel consumption, increase
with the size of the load.
• Drive gently. Avoid quick acceleration,
heavy braking and hard cornering.
WARNING
The car's centre of gravity and driving characteristics are altered by roof loads. For
information on maximum permitted roof
load, including load carriers and any space
box, see page 291.
05 During your journey
Loading
Lowering the rear seat backrest
Bag holder*
12 V electrical socket*
If the rear seat backrest needs to be lowered,
see page 73.
G021442
G021463
Load retaining eyelets
Bag holder under folding hatch in the floor.
The bag holder keeps carrier bags in place and
prevents them from overturning and spreading
their contents across the cargo area.
The folding load retaining eyelets are used to
fasten straps in order to anchor items in the
cargo area.
WARNING
1. Fold up the holder, which is part of the floor
hatch.
2. Fasten the bags with strap and secure the
carrying handle in the hooks.
Raise the cover to access the electrical socket.
• The socket also provides voltage when the
05
remote control key is not in the ignition
switch.
NOTE
Remember that using the electrical socket
with the engine switched off involves the
risk of discharging the car's battery.
Hard, sharp and/or heavy objects that are
loose or protrude could cause injury during
heavy braking. Always secure large and
heavy objects with a seatbelt or cargo
retaining straps.
* Option/accessory, for more information, see Introduction.
223
05 During your journey
Cargo area
Ski hatch
Attaching the hatch
The hatch in the backrest can be opened to
transport long narrow items.
Refit the hatch in the grooves behind the
upholstery and close the hatch.
Fold the right-hand backrest forward.
Release the hatch in the rear seat backrest
by sliding the bolt up while pressing the
hatch down/forward.
05
Fold back the backrest with the hatch
open.
Use the seatbelt to prevent the load from moving.
WARNING
Stop the engine and apply the parking brake
when loading and unloading. Otherwise the
gear lever/selector can accidentally be
knocked and moved to a driving position.
Removing the hatch
After the hatch has been released and the
backrest folded backwards, open the hatch
approx. 30 degrees and pull it straight up.
224
05 During your journey
Driving with a trailer
General
Payload depends on the car's kerb weight. The
total of the weight of the passengers and all
accessories, e.g. towbar, reduces the car's
payload by a corresponding weight. For more
detailed information on weights, see
page 291.
If the towing bracket is mounted by Volvo, then
the car is delivered with the necessary equipment for driving with a trailer.
• The car's towing bracket must be of an
approved type.
• If the towbar is retrofitted, check with your
Volvo dealer that the car is fully equipped
for driving with a trailer.
• Distribute the load on the trailer so that the
weight on the towing bracket complies
with the specified maximum towball load.
• Increase the tyre pressure to the recommended pressure for a full load. For tyre
pressure label location, see page 243.
• The engine is loaded more heavily than
usual when driving with a trailer.
• Do not tow a heavy trailer when the car is
brand new. Wait until it has been driven at
least 1000 km.
• The brakes are loaded much more than
usual on long and steep downhill slopes.
Downshift to a lower gear and adjust your
speed.
• For safety reasons, the maximum permitted speed for the car when coupled with a
trailer should not be exceeded. Follow the
regulations in force for the permitted
speeds and weights.
•
Maintain a low speed when driving with a
trailer up long, steep ascents.
• Avoid driving with a trailer on inclines of
more than 12%.
Trailer cable
An adapter is required if the car's towing
bracket has 13 pin electrics and the trailer has
7 pin electrics. Use an adapter cable approved
by Volvo. Make sure the cable does not drag
on the ground.
Direction indicators and brake lights on
the trailer
If any of the trailer's lamps for direction indicators are broken, then the combined instrument
panel's symbol for direction indicators flashes
faster than normal and the display shows the
text Bulb fail - Ind. signal trailer.
If any of the trailer's lamps for the brake light
are broken then the Bulb fail - Stop lamp
trailer text is shown.
stationary the rear of the car lowers slightly,
which is normal.
Trailer weights
For information on Volvo's permitted trailer
weights, see page 292.
NOTE
The stated maximum permitted trailer
weights are those permitted by Volvo.
National vehicle regulations can further limit
trailer weights and speeds. Towbars can be
certified for higher towing weights than the
car can actually tow.
WARNING
05
Follow the stated recommendations for
trailer weights. Otherwise, the car and trailer
may be difficult to control in the event of
sudden movement and braking.
Manual gearbox
Overheating
When driving with a trailer in hilly terrain in a hot
climate there may be a risk of overheating.
• Do not run the engine at higher revolutions
Level control*
The rear shock absorbers maintain a constant
height irrespective of the car's load (up to the
maximum permissible weight). When the car is
than 4500 rpm (diesel engines: 3500 rpm)
- otherwise the oil temperature may
become too high.
``
* Option/accessory, for more information, see Introduction.
225
05 During your journey
Driving with a trailer
Diesel engine 5-cyl
Parking on a hill
• In the event of a risk of overheating the
1. Depress the foot brake.
optimal speed for the engine is 2300-3000
rpm for optimal circulation of the coolant.
2. Activate the parking brake.
3. Move the gear selector to position P.
•
Follow the installation instructions carefully.
•
The detachable section must be locked
with the key before setting off.
•
Check that the indicator window shows
green.
Automatic gearbox
4. Release the foot brake.
Overheating
• Move the gear selector to park position P
When driving with a trailer in hilly terrain in a hot
climate there may be a risk of overheating.
• An automatic gearbox selects the optimum
gear related to load and engine speed.
when parking an automatic car with a
hitched trailer. Always use the parking
brake.
• Block the wheels with chocks when parking a car with hitched trailer on a hill.
• In the event of overheating a warning sym05
bol illuminates on the instrument panel
combined with a text message - follow the
recommendation given.
• Do not lock the automatic transmission in
3. Release the parking brake.
4. Release the foot brake and start driving off.
Towing bracket
See also the specific information on slow
driving with trailer for cars with the
Powershift automatic transmission on page
109.
226
greased regularly.
1. Depress the foot brake.
Steep inclines
IMPORTANT
Important checks
• The towbar's towball must be cleaned and
Starting on a hill
2. Move the gear selector to driving position D.
a higher gear than the engine "can cope
with" - it is not always a good idea to drive
at a high gear with low engine revolutions.
WARNING
If the car is fitted with a Volvo detachable
towbar:
If the car is equipped with a detachable towbar,
the installation instructions for the loose section must be followed carefully, see
page 228.
NOTE
If a towball hitch with vibration damper is
used, it is not necessary to grease the towball.
05 During your journey
Driving with a trailer
G021484
Specifications
G021485
Storing the detachable towbar
Dimensions, mounting points (mm)
Towbar storage space.
IMPORTANT
G021483
Always remove the towbar after use and
store it in the appointed location in the car,
firmly fastened with its strap.
1
1127
2
93
3
855
4
428
5
112
6
360
7
Side member
8
Ball centre
05
``
227
05 During your journey
Driving with a trailer
The indicator window must show red.
G021490
G018928
G021488
Attaching the towbar
The indicator window must show green.
Remove the protective cover by first pressing in the catch
and then pulling the
cover straight back
.
G021487
Ensure that the mechanism is in the
unlocked position by turning the key clockwise.
228
Insert the towbar until you hear a click.
G000000
G021489
05
Turn the key anticlockwise to locked position. Remove the key from the lock.
05 During your journey
Check that the towbar is secure by pulling
it up, down and back.
WARNING
If the towbar is not fitted correctly then it
must be detached and reattached in
accordance with the previous instructions.
IMPORTANT
G021495
G021494
Driving with a trailer
Safety cable.
Push in the locking wheel
and turn it
until you hear a click.
anticlockwise
WARNING
Be sure to attach the trailer's safety cable to
the correct place.
05
Removing the towbar
Only grease in the ball for the towing hitch,
the remainder of the towbar should be clean
and dry.
Turn the locking wheel down fully, until it
comes to a stop. Hold it in this position
while pulling the towbar rearward and
upward.
WARNING
Insert the key and turn it clockwise to the
unlocked position.
Secure the towbar safely if it is stored in the
car, see page 227.
``
229
05 During your journey
G018929
Driving with a trailer
Push the protective cover until it snaps
tight.
05
230
05 During your journey
Towing and recovery
Towing
The brake servo and power steering do not
work when the engine is switched off. The
brake pedal must be pressed about five
times harder than normal, and the steering
will be considerably heavier than normal.
1. Press the remote control key into the ignition switch to unlock the steering lock so
that the car can be steered, see page 69.
2. The remote control key must remain in the
ignition switch while the car is being towed.
Manual gearbox
3. Keep the towline taut when the towing
vehicle reduces speed by holding your foot
gently pressed on the brake pedal thereby avoiding unnecessary jerking.
Automatic gearbox, Geartronic
IMPORTANT
Note that the car must always be towed with
the wheels rolling forward.
WARNING
The steering lock must be unlocked
before towing.
•
The remote control key must be in key
position II.
•
Never remove the remote control key
from the ignition switch while driving or
when the car is being towed.
Avoid towing.
Move gear lever into neutral and release
the parking brake.
4. Be prepared to brake to stop.
•
IMPORTANT
WARNING
Find out the highest legal speed for towing
before towing the car.
•
Cars with automatic gearbox must not
be towed at speeds above 80 km/h or
further than 80 km.
Move the gear selector to position N and
release the parking brake.
Automatic gearbox, Powershift
The 2.0, 2.0T and 2.0F models with Powershift
automatic transmission should not be towed
as the transmission is dependent on the engine
running in order to receive sufficient lubrication.
•
However, the car can be towed for a
short distance at low speed to move it
from a dangerous position - not further
than 10 km and not faster than
10 km/h. Note that the car must always
be towed with the wheels rolling forward.
•
In the event of moving a longer distance
than 10 km, the car must be transported
with the drive wheels raised from the
road - professional recovery is recommended.
05
Move the gear selector to position N and
release the parking brake.
Jump starting
Do not tow the car to bump start the engine.
Use a donor battery if the battery is discharged
and the engine does not start, see page 105.
IMPORTANT
Bump starting the car can damage the catalytic converter.
``
231
05 During your journey
Towing and recovery
Towing eye
The towing eye is screwed into a threaded
socket behind a cover on the right-hand side
of the bumper, front or rear.
Attaching the towing eye
• Open the variant with a recess using a
coin or similar inserted in the recess,
turning it outwards. Then turn out the
cover completely and remove it.
• The second variant has a marking along
one side or in a corner: Press the marking with a finger and fold out the opposite side/corner at the same time using
a coin or similar - the cover turns around
its axis and can then be removed.
Screw the towing eye right in up to its
flange. Turn in the towing eye firmly e.g.
using the wheel wrench.
After use, unscrew the towing eye and
return it to its place.
05
Finish by refitting the cover onto the
bumper.
IMPORTANT
The towing eye is only designed for towing
on roads - not for pulling the car unstuck or
out of a ditch. Call a recovery service for
recovery assistance.
Take out the towing eye that is located
under the floor hatch in the cargo area.
The cover for the towing eye's attachment
point is available in two variants which
must be opened in different ways:
232
NOTE
On certain cars with towbar fitted the towing
eye cannot be attached in the rear bracket.
Attach the towrope in the towbar.
For this reason it is advisable to store the
detachable towbar's towball in the car.
Recovery
Call a recovery service for recovery assistance.
IMPORTANT
Note that the car must always be transported with the wheels rolling forward.
•
An All Wheel Drive car (AWD) with raised
front suspension must not be towed at
speeds above 70 km/h. It should not be
towed further than 50 km.
05 During your journey
05
233
General .................................................................................................
Changing wheels ..................................................................................
Tyre pressure .......................................................................................
Warning triangle and first-aid kit*..........................................................
Emergency puncture repair (TMK)* ......................................................
234
* Option/accessory, for more information, see Introduction.
236
240
243
244
245
WHEELS AND TYRES
06 Wheels and tyres
General
Driving characteristics
Tyres greatly affect the car's driving characteristics. The type of tyre, dimensions, tyre pressure and speed rating are important for how the
car performs.
Tyres with the greatest tread depth should
always be fitted to the rear of the car (to
decrease the risk of skidding).
New tyres
NOTE
Ensure that tyres of the same type and
dimensions, and also the same make, are
fitted to all four wheels.
Direction of rotation
Follow the recommended tyre pressures
specified in the tyre pressure table, see
page 300.
Tyre care
G021778
Tyre age
06
The arrow shows the tyre's direction of rotation.
Tyres with a tread pattern which are designed
to only turn in one direction have the direction
of rotation marked with an arrow. The tyre must
always rotate in the same direction throughout
its lifespan. Tyres should only be switched
between front and rear positions, never
between left and right-hand sides, or vice
versa. If the tyres are fitted incorrectly, the car's
braking characteristics and capacity to force
rain and slush out of the way are adversely
affected.
236
All tyres older than 6 years old should be
checked by an expert even if they seem
undamaged. Tyres age and decompose, even
if they are hardly ever or never used. The function can therefore be affected. This applies to
all tyres that are stored for future use. Examples of external signs which indicate that the
tyre is unsuitable for use are cracks or discoloration.
Tyres are perishable. After a few years they
begin to harden at the same time as the friction
capacity/characteristics gradually deteriorate.
For this reason, aim to get as fresh tyres as
possible when you replace them. This is especially important with regard to winter tyres. The
last four digits in the sequence mean the week
and year of manufacture. This is the tyre's
DOT marking (Department of Transportation),
and this is stated with four digits, for example
1510. The tyre in the illustration was manufactured in week 15 of 2010.
Summer and winter tyres
When summer and winter wheels are changed
the wheels should be marked with which side
of the car they were mounted on, for example
L for left and R for right.
06 Wheels and tyres
General
The correct tyre pressure results in more even
wear, see page 243. Driving style, tyre pressure, climate and road condition affect how
quickly your tyres age and wear. To avoid differences in tread depth and to prevent wear
patterns arising, the front and rear wheels can
be switched with each other. A suitable distance for the first change is approx. 5000 km
and then at 10 000 km intervals. Volvo recommends that you contact an authorised Volvo
workshop for checking if you are uncertain
about tread depth. If significant differences in
wear (>1 mm difference in tread depth)
between tyres have already occurred, the least
worn tyres must always be placed on the rear.
Understeer is normally easier to correct than
oversteer, and leads to the car continuing forwards in a straight line rather than having the
rear end skidding to one side, resulting in possible complete loss of control over the car. This
is why it is important for the rear wheels never
to lose grip before the front wheels.
Wheels should be stored lying down or hanging
up - and not standing up.
WARNING
A damaged tyre can lead to loss of control
of the car.
Only use rims that are tested and approved by
Volvo and which are Volvo genuine accessories. Check the torque with a torque wrench.
Tyres with tread wear indicators
Locking wheel bolts*
Locking wheel bolts* can be used on both aluminium and steel rims. Under the cargo area
floor there is space for the sleeve for the lockable wheel bolts.
Tools
G021829
Wear and maintenance
Tread wear indicators.
Tread wear indicators are narrow treadless
bands across the width of the tread. On the
side of the tyre are the letters TWI (Tread Wear
Indicator). When the tyre's tread depth is down
to 1.6 mm, the tread depth will be level in height
with the tread wear indicators. Change to new
tyres as soon as possible. Remember that
tyres with little tread depth provide very poor
grip in rain and snow.
Rims and wheel bolts
IMPORTANT
The wheel bolts must be tightened to
140 Nm. Overtightening can damage the
nuts and the bolts.
06
Located under the cargo area floor are the
car's towing eye, jack* and wheel wrench*.
There is also space for the sleeve for the lockable wheel bolts.
Jack*
The jack's thread must always be well greased.
``
* Option/accessory, for more information, see Introduction.
237
06 Wheels and tyres
General
The original jack should only be used for
changing to the spare wheel. The jack's thread
must always be well greased.
Tools - returning into place
The tools and jack* must be returned to their
correct places after use. The jack needs to be
cranked together to the correct position in
order to have space.
The foam block and spare wheel are replaced
in the reverse order to taking out.
NOTE
Volvo recommends that you consult a Volvo
dealer about which wheel rim and tyre types
are most suitable.
Studded tyres
Studded winter tyres should be run in gently for
500-1000 km so the studs settle properly into
the tyres. This gives the tyre, and especially the
studs, a longer service life.
Note that there is an arrow on the upper foam
block. It must point forwards in the car.
IMPORTANT
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.
06
Winter tyres
Volvo recommends winter tyres with particular
dimensions. Tyre dimensions are dependent
on engine variant. When driving on winter tyres,
the correct type of tyres must be fitted to all
four wheels.
NOTE
The legal provisions for the use of studded
tyres vary from country to country.
Specifications
The car has whole vehicle approval. This
means that certain combinations of wheels and
tyres are approved. For the permissible combinations, see page 300
Wheel (rim) dimensions
Tread depth
Road conditions with ice, slush and low temperatures place considerably higher demands
on tyres than summer conditions. Volvo therefore recommends not to drive on winter tyres
that have a tread depth of less than 4 millimetres.
Wheels (rims) have a designation of dimensions, for example: 7Jx16x50.
7
Rim width in inches
J
Rim flange profile
16
Rim diameter in
inches
50
Off-set in mm (distance from wheel
centre to wheel contact surface against
the hub)
Using snow chains
Snow chains may only be used on the front
wheels (also applies to all-wheel drive cars).
Never drive faster than 50 km/h with snow
chains. Avoid driving on bare ground as this
wears out both the snow chains and tyres.
238
WARNING
Use Volvo genuine snow chains or equivalent chains designed for the car model, and
tyre and rim dimensions. In the event of
uncertainty Volvo recommends that you
consult an authorised Volvo workshop. The
wrong snow chains may cause serious
damage to your car and lead to an accident.
* Option/accessory, for more information, see Introduction.
06 Wheels and tyres
General
Tyre dimensions
225/50R17 98W.
The dimensions are stated on all car tyres.
Example of designation:
225
Tyre width (mm)
50
Ratio between tyre wall height and
tyre width (%)
R
Radial ply
17
Rim diameter in inches (")
98
Codes for the maximum permitted
tyre load, tyre load index (LI)
W
Speed rating for maximum permitted
speed, speed rating (SS). (In this case
270 km/h).
Load index
Each tyre has a certain capacity to carry a load,
a load index (LI). The car's weight determines
the load capacity required of the tyres. Minimum permitted index is specified in the table,
see page 300.
Speed ratings
Each tyre can withstand a certain maximum
speed, a speed rating (Speed Symbol; SS).
Tyre speed class must at least correspond with
the car's top speed. Minimum permitted speed
rating is specified in the table, see page 300.
The only exception to these conditions is winter tyres (both those with metal studs and those
without), where a lower speed rating may be
used. If such a tyre is chosen, the car must not
be driven faster than the speed rating of the
tyre (for example, class Q can be driven at a
maximum of 160 km/h).
WARNING
The car must be fitted with tyres which have
the same or a higher load index (LI) and
speed rating (SS) than specified. If a tyre
with too low a load index or speed rating is
used, it may overheat.
Traffic regulations determine how fast a car
can be driven, not the speed rating of the tyres.
NOTE
It is the maximum permitted speed that is
stated in the table.
Q
160 km/h (used only on winter tyres)
T
190 km/h
H
210 km/h
V
240 km/h
W
270 km/h
Y
300 km/h
06
239
06 Wheels and tyres
Changing wheels
Removing
and pull off any full-wheel hubcaps. Alternatively, the hubcaps can be pulled away
by hand.
Set up the warning triangle, see page 244 if a
wheel must be replaced at a busy location. The
car and jack* must be on a firm horizontal surface.
1. Apply the parking brake and engage
reverse gear, or position P if the car has an
automatic gearbox.
WARNING
Check that the jack is not damaged, that the
threads are thoroughly lubricated and that it
is free from dirt.
NOTE
06
Volvo recommends only using the jack* that
belongs to the car model in question, which
is indicated on the jack's label.
The label also indicates the jack's maximum
lift capacity at a specified minimum lifting
height.
2. Take out the jack*, wheel wrench* and
removal tool for hubcaps* located under
the cargo floor in the cargo area. If another
jack is selected, see page 252.
IMPORTANT
4. Place chocks in front of and behind the
wheels which will remain on the ground.
Use heavy wooden blocks or large stones
for example.
5. (For cars with steel wheel rims and detachable wheel covers) Prize off the wheel
cover.
6. Screw together the towing eye with the
wheel wrench* until the stop position as
illustrated below.
3. Cars with steel wheel rims have detachable
hubcaps. Use the removal tool to hook in
240
* Option/accessory, for more information, see Introduction.
The towing eye must be screwed into all
threads in the wheel bolt wrench.
7. Loosen the wheel bolts ½-1 turn anticlockwise with the wheel wrench.
WARNING
Never position anything between the
ground and the jack, nor between the jack
and the car's jacking point.
8. There are two jacking points on each side
of the car. There is a recess in the plastic
cover at each point. Crank the foot of the
06 Wheels and tyres
Changing wheels
jack down so it is pressed squarely on the
ground.
3. Lower the car so that the wheels cannot
rotate.
WARNING
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack.
Park the car so that passengers have the car
- or preferably a crash barrier - between
them and the road.
G017465
Spare wheel*
IMPORTANT
The ground must be firm, smooth and level.
9. Lift the car so that the wheel is free.
Remove the wheel bolts and lift off the
wheel.
Installation
1. Clean the contact surfaces between wheel
and hub.
4. Tighten the wheel bolts crosswise. It is
important that the wheel bolts are tightened properly. Tighten to 140 Nm. Check
the torque with a torque wrench.
5. Refit any full hubcaps.
NOTE
The wheel cover outlet for the valve must be
positioned over the valve on the wheel rim
during fitting.
The spare wheel (Temporary spare) is only
intended for use temporarily and must be
replaced by an ordinary wheel as soon as possible. The car's handling may be altered by the
use of the spare wheel. The spare wheel is
smaller than the normal wheel. The car's
ground clearance is affected accordingly. Pay
attention to high kerbs and do not machine
wash the car. If the spare wheel is fitted on the
front axle, you cannot use snow chains at the
same time. On all-wheel drive cars the drive on
the rear axle can be disconnected. The spare
wheel must not be repaired. The correct tyre
pressure for the spare wheel is stated in the
tyre pressure table, see page 300.
06
2. Put on the wheel. Tighten the wheel bolts
thoroughly.
``
* Option/accessory, for more information, see Introduction.
241
06 Wheels and tyres
Changing wheels
IMPORTANT
Never drive faster than 80 km/h with a spare
wheel on the car.
IMPORTANT
The car must never be driven fitted with
more than one temporary spare wheel.
The spare wheel is located in the spare wheel
well with the outside down. The same bolt runs
through to secure the spare wheel and the
foam block. The foam block contains all the
tools.
Taking out the spare wheel
1. Fold up the cargo area floor, from the rear
and forwards.
06
2. Undo the retaining screw.
3. Lift out the foam block with its tools.
4. Lift out the spare wheel.
242
06 Wheels and tyres
Tyre pressure
Tyre pressure
Fuel economy, ECO pressure
At speeds under 160 km/h, the general tyre
pressure is recommended (applies for both full
load and light load) in order to obtain optimum
fuel economy.
Checking the tyre pressure
The tyre pressures must be checked every
month.
G021830
This also applies to the car's spare wheel.
The tyre pressure decal on the driver's side
door pillar (between frame and rear door)
shows which pressures the tyres should have
at different loads and speed conditions. This is
also specified in the tyre pressure table, see
page 300.
• Tyre pressure for the car's recommended
tyre dimension
• ECO pressure1
• Spare wheel tyre pressure (Temporary
Spare)
NOTE
Temperature differences change the
tyre pressure.
1
Check tyre pressures on cold tyres. "Cold
tyres" means the tyres are the same temperature as the ambient temperature. After several
kilometres of driving, the tyres warm up and the
pressure increases.
Inadequate tyre pressure increases fuel consumption, shortens tyre lifespan and impairs
the car's roadholding. Driving on tyres with tyre
pressure that is too low could result in the tyres
overheating and being damaged. Tyre pressure affects travelling comfort, road noise and
steering characteristics.
06
NOTE
Tyre pressure decreases over time, this is a
natural phenomenon. Tyre pressure also
varies depending on ambient temperature.
ECO pressure results in improved fuel economy.
243
06 Wheels and tyres
Warning triangle and first-aid kit*
Warning triangle
The warning triangle is fitted on the inside of
the boot lid with two clips.
Detach the warning triangle case by pulling
both of the snap latches outwards.
Take the warning triangle from the case,
fold out and assemble the two loose sides.
Fold out the warning triangle's support
legs.
Follow the regulations for the use of a warning
triangle. Position the warning triangle in a suitable place with regard to traffic.
Ensure the warning triangle and its case are
properly secured in the cargo area after use.
First aid kit*
06
244
A case with first aid equipment is located in the
cargo area.
* Option/accessory, for more information, see Introduction.
06 Wheels and tyres
Emergency puncture repair (TMK)*
General
the wall. Do not seal tyres with the emergency
puncture repair kit if they have larger slits,
cracks or similar damage.
Overview
12 V sockets* for connecting the compressor
are located by the centre console in the front,
by the rear seat and in the cargo area. Choose
the electrical socket that is nearest the punctured tyre.
Location of the emergency puncture
repair kit
Emergency puncture repair (TMK; Temporary
Mobility Kit) is used to seal a puncture and
check and adjust tyre pressure. It consists of a
compressor and a bottle with sealing fluid. The
kit works as a temporary repair. The sealing
fluid bottle must be replaced before its expiration date and after use.
The sealing fluid effectively seals tyres punctured in the tread.
NOTE
The emergency puncture repair kit is only
intended for sealing tyres with a puncture in
the tread.
Set up the warning triangle if a tyre is being
sealed in a trafficked location. The emergency
puncture repair kit is located under the floor in
the cargo area.
Label, maximum permitted speed
Switch
WARNING
Cable
You should not drive faster than 80 km/h
after the emergency tyre repair kit has been
used. Volvo recommends that you visit an
authorised Volvo workshop for inspection of
the sealed tyre (maximum driving distance
is 200 km). The staff there can determine
whether or not the tyre can be repaired or if
it needs to be replaced.
Bottle holder (orange cap)
Protective cap
06
Pressure reducing valve
Air hose
Sealing fluid bottle
Pressure gauge
The emergency puncture repair kit has limited
capacity to seal tyres which have punctures in
``
* Option/accessory, for more information, see Introduction.
245
06 Wheels and tyres
Emergency puncture repair (TMK)*
Sealing punctured tyres
WARNING
The sealing fluid can irritate the skin. In the
case of contact with skin, wash away the
fluid with soap and water.
WARNING
Do not leave children in the car without
supervision when the engine is running.
8. Flick the switch to position I.
3. Check that the switch is in position 0 and
locate the cable and the air hose.
NOTE
Do not break the bottle's seal before use.
The seal is broken automatically when the
bottle is screwed in.
4. Unscrew the orange cap and unscrew the
bottle's stopper.
06
G014338
5. Screw the bottle into its holder.
WARNING
Do not unscrew the bottle, it is equipped
with a reverse catch to prevent leakage.
For information on the function of the parts, see
preceding illustration.
246
1. Open the lid of the emergency puncture
repair kit.
6. Unscrew the wheel's dust cap and screw
in the air hose valve connection to the bottom of the thread on the tyre's air valve.
2. Detach the label for maximum permitted
speed and affix it to the steering wheel.
7. Plug the cable into the 12 V socket and
start the car.
* Option/accessory, for more information, see Introduction.
WARNING
Never stand next to the tyre when the compressor is running. If cracks or unevenness
arise then the compressor must be
switched off immediately. The journey
should not be continued. Contacting an
authorised tyre centre is recommended.
NOTE
When the compressor starts, the pressure
can increase up to 6 bar but the pressure
drops after approximately 30 seconds.
9. Inflate the tyre for 7 minutes.
IMPORTANT
Risk of overheating. The compressor must
not run for more than 10 minutes.
10. Switch off the compressor to check the
pressure on the pressure gauge. Minimum
06 Wheels and tyres
Emergency puncture repair (TMK)*
pressure is 1.8 bar and maximum 3.5 bar.
(Release air with the pressure reducing
valve if the tyre pressure is too high.)
WARNING
If the pressure is below 1.8 bar then the hole
in the tyre is too big. The journey should not
be continued. Contacting an authorised tyre
centre is recommended.
11. Switch off the compressor and unplug the
cable from the 12 V socket.
12. Detach the hose from the tyre valve and fit
the valve cap.
13. As soon as possible, drive approximately
3 km at a maximum speed of 80 km/h so
that the sealing fluid can seal the tyre.
tyre pressure table, see page 300 (1
bar=100 kPa). Release air using the
pressure reducing valve if the tyre pressure is too high.
WARNING
Do not unscrew the bottle, it is equipped
with a reverse catch to prevent leakage.
3. Make sure the compressor is switched off.
Detach the air hose and cable. Refit the
dust cap.
NOTE
2. Read the tyre pressure on the pressure
gauge.
• If it is below 1.3 bar then the tyre is
insufficiently sealed. The journey should
not be continued. Contact a tyre centre.
• If the tyre pressure is higher than 1.3
Inflating the tyres
The car's original tyres can be inflated by the
compressor.
1. The compressor must be switched off.
Make sure that the switch is in position 0
and locate the cable and air hose.
The sealing fluid bottle and the hose must
be replaced after use. Volvo recommends
that this replacement is performed by an
authorised Volvo workshop.
2. Unscrew the wheel's dust cap and screw
in the air hose valve connection to the bottom of the thread on the tyre's air valve.
Rechecking the repair and pressure
1. Reconnect the equipment.
WARNING
You should not drive faster than 80 km/h
after the emergency tyre repair kit has been
used. Volvo recommends that you visit an
authorised Volvo workshop for inspection of
the sealed tyre (maximum driving distance
is 200 km). The staff there can determine
whether or not the tyre can be repaired or if
it needs to be replaced.
WARNING
Check the tyre pressure regularly.
06
WARNING
Volvo recommends that you drive to the nearest authorised Volvo workshop for the replacement/repair of the damaged tyre. Advise the
workshop that the tyre contains sealing fluid.
Inhaling car exhaust fumes can result in
danger to life. Never leave the engine running in sealed areas or areas that lack sufficient ventilation.
bar, the tyre must be inflated to the pressure specified in accordance with the
``
* Option/accessory, for more information, see Introduction.
247
06 Wheels and tyres
Emergency puncture repair (TMK)*
WARNING
Do not leave children in the car without
supervision when the engine is running.
Replacing the sealing fluid canister
Replace the bottle when the expiration date
has passed. Treat the old bottle as environmentally hazardous waste.
3. Connect the cable to one of the car's 12 V
sockets and start the car.
4. Start the compressor by flicking the switch
to position I.
IMPORTANT
Risk of overheating. The compressor must
not run for more than 10 minutes.
06
WARNING
The bottle contains 1.2-Ethanol and natural
rubber-latex.
Harmful if ingested. Could result in allergic
reaction in the event of skin contact.
Avoid contact with the skin and eyes.
Store out of the reach of children.
5. Inflate the tyre to the pressure specified in
accordance with the tyre pressure table,
see page 300. (Release air using the pressure reducing valve if the tyre pressure is
too high.)
6. Switch off the compressor. Detach the air
hose and cable.
7. Refit the dust cap.
248
* Option/accessory, for more information, see Introduction.
06 Wheels and tyres
06
249
Engine compartment.............................................................................
Lamps...................................................................................................
Wiper blades and washer fluid..............................................................
Battery...................................................................................................
Fuses.....................................................................................................
Car care................................................................................................
250
252
259
266
268
271
280
MAINTENANCE AND SERVICE
07 Maintenance and service
Engine compartment
General
Volvo service programme
To keep the car as safe and reliable as possible, follow the Volvo service programme as
specified in the Service and Warranty Booklet.
Volvo recommends engaging an authorised
Volvo workshop to perform the service and
maintenance work. Volvo workshops have the
personnel, special tools and service literature
to guarantee the highest quality of service.
IMPORTANT
For the Volvo warranty to apply, check and
follow the instructions in the Service and
Warranty Booklet.
Check regularly
Check the following oils and fluids at regular
intervals, e.g. when refuelling:
07
252
•
•
•
•
Coolant
Engine oil
Power steering fluid
Washer fluid
WARNING
Bear in mind that the radiator fan may start
automatically some time after the engine
has been switched off.
Always have the engine cleaned by a workshop. There is a risk of fire if the engine is
hot.
Raising the car
NOTE
Volvo recommends only using the jack that
belongs to the car model in question. If a
jack is selected other than the one recommended by Volvo, follow the instructions for
use supplied with the equipment
If the car is raised with a workshop jack; position the jack against the front edge on the
engine's subframe.
Do not damage the splashguard under the
engine. Ensure that the workshop jack is positioned so that the car cannot slide off the jack.
Always use axle stands or similar.
If you raise the car using a two-pillar workshop
lift, ensure that the front and rear lift arms are
fixed under the lifting points. See preceding
illustration.
Opening and closing the bonnet
07 Maintenance and service
Engine compartment
Engine compartment, overview
Filling washer fluid
Air filter
WARNING
G010951
High voltage from the ignition system. The
voltage in the ignition system is highly dangerous. The remote control key must always
be in 0 position when work is being done in
the engine compartment, see page 69.
Move the catch to the left and open the
bonnet. (The catch hook is located
between the headlamp and grille, see illustration.)
G018945
Pull the handle by the pedals. You will hear
when the catch releases.
Do not touch the spark plugs or ignition coil
when the remote control key is in II position
or when the engine is hot.
The appearance of the engine compartment may
vary depending on engine variant.
WARNING
Check that the bonnet locks properly when
closed.
Coolant expansion tank
Checking the engine oil
Power steering fluid reservoir
Engine oil dipstick1
Radiator
Filler opening for engine oil
Brake and clutch fluid reservoir (left-hand
drive)
07
Battery
Relay and fuse box, engine compartment
Volvo recommends Castrol oil products.
1
Engines with electronic oil level sensor have no dipstick (5-cyl. diesel).
``
253
07 Maintenance and service
Engine compartment
When driving under adverse conditions, see
page 295.
IMPORTANT
In order to fulfil the requirements for the
engine's service intervals all engines are
filled with a specially adapted synthetic
engine oil at the factory. The choice of oil
has been made very carefully with regard to
service life, starting characteristics, fuel
consumption and environmental impact.
An approved engine oil must be used in
order that the recommended service intervals can be applied. Only use a prescribed
grade of oil for both filling and oil change,
otherwise you will risk affecting service life,
starting characteristics, fuel consumption
and environmental impact.
play texts. Certain models have both variants.
Contact a Volvo dealer for more information.
Change the engine oil in accordance with the
intervals specified in the Service and Warranty
Booklet.
Using oil of a higher than specified grade is
permitted. If the car is driven in adverse conditions, Volvo recommends using an oil of a
higher grade than that specified on the decal,
see page 296.
Volvo recommends checking the oil level every
2 500 km. The most accurate measurements
are made on a cold engine before starting. The
measurement will be inaccurate if taken immediately after the engine is switched off. The
dipstick will indicate that the level is too low
because the oil has not had time to flow down
into the oil sump.
For capacities, see page 296 and onwards.
Engine with oil dipstick2
2
254
Only applies to petrol and 4-cyl. diesel.
The oil level must be between the MIN and MAX
marks.
Measurement and filling if required
G021734
07
Volvo uses different systems for warning of
low/high oil level or low/high oil pressure. Certain variants have an oil pressure sensor, and
then the lamp for oil pressure is used. Other
variants have an oil level sensor, and then the
driver is informed via the warning symbol in the
centre of the instrument unit as well as by dis-
G021737
Volvo Car Corporation disclaims all warranty liability if engine oil of the prescribed
grade and viscosity is not used.
Dipstick and filler pipe.
Checking the oil level in a new car is especially
important before the first scheduled oil change.
1. Ensure that the car is level. After switching
off the engine it is important to wait
5 minutes to allow the oil time to run back
to the sump.
2. Pull up and wipe the dipstick.
07 Maintenance and service
Engine compartment
3. Re-insert the dipstick.
Engine with electronic oil level sensor3
4. Pull it out and check the level.
5. If the level is close to MIN then 0.5 litres
should be added. If the level is significantly
below, then an additional amount is
required.
6. If required, check the level again, do it after
driving a short distance. Then repeat steps
1 - 4.
WARNING
Never fill above the MAX mark. The level
should never be above MAX or below MIN
as this could lead to engine damage.
WARNING
Message and graph in the display.
Filler pipe.4
Message
You do not need to take action with respect to
the engine oil level before a message is shown
in the display, see the illustration below.
Engine oil level
Do not spill oil onto the hot exhaust manifold
due to the risk of fire.
WARNING
If the message Oil service required is
shown, visit a workshop. The oil level may
be too high.
IMPORTANT
07
In the event of the message Engine oil
level Fill with 0.5 l oil, only fill with 0.5 litres.
3
4
Only applies to 5-cyl. diesel.
Engines with electronic oil level sensor have no dipstick (5-cyl. diesel).
``
255
07 Maintenance and service
Engine compartment
NOTE
The oil level is only detected by the system
during driving. The system cannot directly
detect changes when the oil is filled or
drained. The car must be driven
about 30 km before the oil level display is
correct.
> You will then see information displayed
about the engine oil level.
Coolant
Checking the level and topping up
WARNING
Do not fill more oil if filling level (3) or (4)
appears as shown in the illustration below.
The level must never be above MAX or
below MIN, as this could lead to engine
damage.
WARNING
Do not spill oil onto the hot exhaust manifold
due to the risk of fire.
Measuring the oil level
07
If the oil level needs to be checked then it
should be carried out in accordance with the
sequence below.
1. Activate key position II, see page 69.
2. Rotate the thumbwheel on the left-hand
stalk switch to position Engine oil level
Wait....
256
The figures 1-4 represent filling level. Do not fill
more oil if filling level (3) or (4) is shown. Recommended filling level is 4.
When topping up the coolant, follow the
instructions on the packaging. It is important
that the mixture of coolant concentrate and
water is correct for the prevailing weather conditions. Never top up with water only. The risk
of freezing increases with both too little and too
much coolant concentrate. For capacities, see
page 297.
07 Maintenance and service
Engine compartment
IMPORTANT
•
A high content of chlorine, chlorides
and other salts may cause corrosion in
the cooling system.
•
Always use coolant with anti-corrosion
agent as recommended by Volvo.
•
Ensure that the coolant mixture is 50%
water and 50% coolant.
•
Mix the coolant with approved quality
tap water. In the event of any doubt
about water quality, used ready-mixed
coolant in accordance with Volvo recommendations.
•
When changing coolant/replacing cooling system components, flush the cooling system clean with approved quality
tap water or flush with ready-mixed
coolant.
•
The engine must only be run with a wellfilled cooling system. High temperatures may occur, causing a risk of damage (cracks) to the cylinder head.
For capacities and for standards regarding
water quality, see page 297.
Check the coolant regularly
The level must lie between the MIN and MAX
marks on the expansion tank. If the system is
not filled sufficiently, high temperatures could
occur, causing a risk of damage to the engine.
WARNING
Coolant can be very hot. If the coolant
requires topping up when the engine is at
operating temperature, unscrew the expansion tank cap slowly to gently release the
overpressure.
WARNING
If the brake fluid is under the MIN level in the
brake fluid reservoir, do not drive further
before topping up the brake fluid. Volvo recommends that the reason for the loss of
brake fluid is investigated by an authorised
Volvo workshop.
Filling
Brake and clutch fluid
Checking the level
Brake and clutch fluid have a common reservoir. The level must be between the MIN and
MAX marks that are visible inside the reservoir.
Check the level regularly.
Change the brake fluid every other year or at
every other regular service.
For capacities and recommended fluid grade,
see page 297. The fluid should be changed
annually on cars driven in conditions requiring
hard, frequent braking, such as driving in
mountains or tropical climates with high
humidity.
The fluid reservoir is located on the driver's side.
The fluid reservoir is protected under the cover
over the cold zone in the engine compartment.
The round cover must be removed first before
the reservoir cap can be reached.
07
1. Turn and open the cover located on the
covering.
``
257
07 Maintenance and service
Engine compartment
2. Unscrew the reservoir cap and fill the fluid.
The level must be between the MIN and
MAX marks, which are located on the
inside of the reservoir.
between the MIN and MAX marks. For capacities and recommended fluid grade, see
page 297.
NOTE
IMPORTANT
Do not forget to refit the cap.
Power steering fluid
07
IMPORTANT
Keep the area around the power steering
fluid reservoir clean when checking. The
cover must not be opened.
Check the level frequently. The fluid does not
require changing. The fluid level must be
258
If a fault should arise in the power steering
system or if the engine is switched off and
the car must be towed, it can still be steered.
07 Maintenance and service
Lamps
General
Headlamps front
Removing the headlamp
1. Press the START-/STOP ENGINE button
quickly.
All bulbs are specified, see page 264. Bulbs
and spotlights that are of a special type or that
are only suitable for replacement by a workshop are:
Pull out the headlamp's locking pins.
General interior lighting in the roof
Pull the headlamp straight forward.
Reading lamps
Glovebox lighting
IMPORTANT
Courtesy lighting
Do not pull the electrical cable, only the connector.
Direction indicators, door mirror
Approach lighting, door mirror
Brake light
3. (Lower illustration)
Xenon, Active Xenon and LED lamps
Detach the headlamp connector by
pressing down the clip with your thumb.
WARNING
On cars equipped with Xenon lamps, headlamp replacement must be performed at a
workshop - an authorised Volvo workshop
is recommended. The lamp must be handled with extreme caution because it is
equipped with a high voltage unit.
IMPORTANT
Never touch the glass part of the bulbs with
your fingers. Grease and oils from your fingers are vaporised by the heat, coating the
reflector and then causing damage.
G010325
•
•
•
•
•
•
•
•
2. (Upper illustration)
All of the headlamp bulbs are replaced via the
engine compartment. Loosen and remove the
whole headlamp.
WARNING
Always switch off the ignition and remove
the remote control key before starting to
replace a bulb.
At the same time, guide out the connector with your other hand.
4. Lift out the headlamp and place it on a soft
surface to avoid scratching the lens.
5. Replace the bulb in question.
Securing the headlamp
07
1. Plug in the connector, a clicking sound
should be heard.
2. Reinstall the headlamp and locking pins.
Check that they are correctly inserted.
3. Check the lighting.
``
259
07 Maintenance and service
Lamps
The headlamp must be mounted and the connector correctly installed before the lighting is
switched on or the remote control key is
inserted into the ignition switch.
Dipped beam, halogen
Main beam, Halogen
G021745
Before starting to replace a bulb, see
page 259.
1. Open the lock clamp by pressing up/out.
07
2. Press down the clips on the cover and
remove it.
Reinstall the cover in reverse order.
260
G021747
G021746
Removing the cover
1. Detach the headlamp, see page 259.
1. Detach the headlamp.
2. Remove the cover.
2. Remove the cover, see page 260
3. Unplug the connector from the bulb.
3. Detach the bulb by turning anticlockwise
and then pulling straight out
4. Detach the bulb by pressing the holder
downwards.
5. Fit the new bulb in the socket and snap it
in. It can be secured in one position.
Reinstall the parts in reverse order.
4. Unplug the connector from the bulb.
5. Replace the bulb and align it in the socket
and turn clockwise in order to secure it. It
can be secured in one position.
Reinstall the parts in reverse order.
07 Maintenance and service
Lamps
G021750
G021748
Direction indicators/flashers
G021749
Position/parking lamps
Extra main beam, Xenon*
1. Detach the headlamp.
1. Detach the headlamp.
1. Detach the headlamp.
2. Remove the cover, see page 260.
2. Remove the cover, see page 260.
2. Remove the small round cover.
3. Detach the bulb by pressing the holder
downwards.
3. For better access, detach the main beam
bulb first.
3. Pull the bulb holder in order to extract the
bulb.
4. Unplug the connector from the bulb.
4. Pull the cable in order to withdraw the bulb
holder.
4. Remove the blown bulb and fit a new one.
It can only be installed in one way.
5. Remove the blown bulb and fit a new one.
It can only be secured in one position.
5. Fit the bulb holder in the socket and press
until a clicking sound is heard.
6. Fit the bulb holder in the socket and press
until a clicking sound is heard.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is heard.
Reinstall the parts in reverse order.
Reinstall the parts in reverse order.
5. Fit the new bulb in the socket and snap it
in. It can only be secured in one position.
Reinstall the parts in reverse order.
07
``
* Option/accessory, for more information, see Introduction.
261
07 Maintenance and service
Lamps
1. Remove the cover by pressing in the 4 clips
with a thin blade and pulling straight out.
The bulbs in the rear light cluster are replaced
from inside the cargo area (not the LED lamps).
1. Detach the headlamp.
2. Unscrew the lamp housing screw and pull
it out.
1. Remove the covers in the left/right-hand
panel to access the bulbs. The bulbs are
located in separate bulb holders.
3. Pull the cable in order to withdraw the bulb
holder.
4. Remove the blown bulb and fit a new one.
It can only be installed in one way.
5. Fit the bulb holder in the socket and press
until a clicking sound is heard.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is heard.
Reinstall the parts in reverse order.
262
G021754
Before starting to replace a bulb, see
page 259.
2. Remove the small round cover.
07
Lamp housing, rear
G021753
Front fog lamps
G021751
Side marker lamps
3. Turn the bulb anticlockwise and remove it.
4. Fit a new bulb by turning clockwise.
5. Refit the bulb. (The profile of the bulb
holder corresponds to the profile of the
foot of the bulb).
6. Refit the bulb holder. The TOP mark on the
bulb holder must always be upward.
2. Press the catches together and pull out the
bulb holder.
3. Replace the bulb.
4. Plug in the connector.
5. Press the bulb holder into place and refit
the cover.
07 Maintenance and service
Lamps
Number plate lighting
NOTE
If an error message remains after the broken
bulb has been replaced then we recommend that you visit an authorised Volvo
workshop.
G021756
G015418
Location of rear bulbs
Rear lamp bulb holder
Direction indicators
Brake light
G021755
Rear fog lamp (one side)
Lamp lens, right-hand side
Reversing lamp
1. Remove the screws with a screwdriver.
2. Carefully detach the whole lamp housing
and withdraw it.
3. Replace the bulb.
4. Refit the whole lamp housing and screw it
into place.
Position/parking lights (LED)
Direction indicators
07
Side position lights (LED)
Brake light
Rear fog lamp (one side)
Reversing lamp
``
263
07 Maintenance and service
Lamps
Lighting, cargo area
Vanity mirror lighting
2. Then press the three lower lugs back into
position.
Removing the mirror glass
G021759
G021758
Specification, bulbs
1. Insert a screwdriver and gently prize so
that the lamp housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press
back the lamp housing.
07
1. Insert a screwdriver underneath the lower
edge, in the centre. Carefully prize up the
lug on the edge.
2. Insert the screwdriver underneath the edge
on the left and right-hand sides (by the
black rubber sections), and prize carefully
so that the mirror glass comes loose in the
lower edge.
3. Carefully detach and lift aside the entire
mirror glass and cover.
4. Replace the bulb.
Securing the mirror glass
1. Press the three lugs at top edge of the mirror glass back into position.
264
Lighting
W
Type
Extra main beam,
Xenon, ABL
55
H7
Dipped beam, halogen
55
H7
Main beam, Halogen
65
H9
Brake light
21
P21W
Reversing lamp
21
P21W
Rear fog lamp
21
P21W
Front direction
indicators
21
H21W
Direction indicators, rear/
21
PY21W
Front fog lamps
35
H8
Cargo area lighting, number plate
lighting
5
Tubular
lamp SV8.5
1.2
W2x4.6D
Vanity mirror
07 Maintenance and service
Lamps
Lighting
W
Type
Front position and
parking lamps
5
W5W
Front side marker
lamps
5
W5W
Glovebox lighting
5
Tubular
lamp SV8.5
07
265
07 Maintenance and service
Wiper blades and washer fluid
Wiper blades
Service position
Replacing the wiper blades
Lift up the wiper arm. Press the button
located on the wiper blade mounting and
pull straight out parallel with the wiper arm.
Slide in the new wiper blade until a "click"
is heard.
Check that the blade is firmly installed.
1. Turn the remote control key to key position
0, see page 69, and keep the remote control key in the ignition switch.
07
2. Move the right-hand stalk switch up for
about 1 second. The wipers then move to
standing straight up.
The wipers return to the starting position when
the car is started.
266
G021763
In order to change, clean or lift the wiper blades
(for scraping off ice from the windscreen) they
must be in service position.
NOTE
The wiper blades are different lengths. The
blade on the driver's side is longer than the
blade on the passenger side.
Cleaning
For cleaning wiper blades and windscreen, see
page 280 and onwards.
07 Maintenance and service
Wiper blades and washer fluid
IMPORTANT
Check the wiper blades regularly.
Neglected maintenance shortens the service life of the wiper blades.
Filling washer fluid
The windscreen and headlamp washers share
a common reservoir.
IMPORTANT
07
Add washer antifreeze during the winter so
that the fluid does not freeze in the pump,
reservoir and hoses.
For capacities, see page 297.
267
07 Maintenance and service
Battery
Warning symbols on the battery
Avoid sparks and naked
flames.
Use protective goggles.
Operation
• Check that the cables to the battery are
correctly connected and properly tightened.
• Never disconnect the battery when the
engine is running.
Risk of explosion.
Further information in the
owner's manual.
The service life and function of the battery is
influenced by factors such as the number of
starts, discharging, driving style, driving conditions, climatic conditions etc.
IMPORTANT
Must be taken for recycling.
Store the battery out of
the reach of children.
Never use a quick charger to charge the
battery.
WARNING
The battery contains corrosive acid.
07
268
NOTE
An expended battery must be recycled in an
environmentally responsible manner - it
contains lead.
Batteries can generate oxyhydrogen gas,
which is highly explosive. One spark, which
can be generated if the jump leads are connected incorrectly, is sufficient to make the
battery explode. The battery contains sulphuric acid, which can cause serious burns.
If sulphuric acid comes into contact with
eyes, skin or clothing, flush with large quantities of water. If acid splashes into the eyes,
seek medical attention immediately.
07 Maintenance and service
Battery
NOTE
The life of the battery is shortened if it
becomes discharged repeatedly.
Changing
Removal
The life of the battery is affected by several
factors, including driving conditions and climate. Battery starting capacity decreases
gradually with time and therefore needs to
be recharged if the car is not used for a
longer time or when it is only driven short
distances. Extreme cold further limits starting capacity.
To maintain the battery in good condition, at
least 15 minutes of driving/week is recommended or that the battery is connected to
a battery charger with automatic trickle
charging.
A battery that is kept fully charged has a
maximum service life.
Switch off the ignition and wait for 5 minutes.
Open the clips on the front cover and
remove the cover.
Release the rubber moulding so that the
rear cover is free.
07
Remove the rear cover by screwing one
quarter turn and lifting it away.
``
269
07 Maintenance and service
Battery
WARNING
Connect and disconnect the positive and
negative cables in the correct sequence.
3. Secure the battery using the battery clamp.
4. Connect the ventilation hose.
5. Connect the red positive cable.
6. Connect the black negative cable.
7. Press in the rear cover. (See Removal).
Detach the black negative cable
Detach the red positive cable
Detach the ventilation hose from the battery
Loosen the screw holding the battery
clamp.
Move the battery to the side and lift it up.
Installation
07
1. Lower the battery into the battery box.
2. Move the battery inward and to the side
until it reaches the rear edge of the box.
270
8. Reinstall the rubber moulding. (See
Removal).
9. Reinstall the front cover and secure it with
the clips. (See Removal).
07 Maintenance and service
Fuses
General
Location, central electrical units
All electrical functions and components are
protected by a number of fuses in order to protect the car's electrical system from damage by
short circuiting or overloading.
If an electrical component or function does not
work, it may be because the component's fuse
was temporarily overloaded and failed. If the
same fuse fails repeatedly then there is a fault
in the circuit. Volvo recommends that you visit
an authorised Volvo workshop for checking.
Changing
1. Look in the fuse diagram to locate the fuse.
2. Pull out the fuse and check from the side
to see whether the curved wire has blown.
3. If this is the case, replace it with a new fuse
of the same colour and amperage.
WARNING
Never use a foreign object, or a fuse with an
amperage higher than that specified when
replacing a fuse. This could cause significant damage to the electrical system and
possibly lead to fire.
Central electrical unit locations in a left-hand
drive car. In a right-hand drive car the central
electrical units under the glovebox change
sides.
,
Under the glovebox
At the side panel on the passenger side
(only Executive*)
Cargo area
Engine compartment
07
``
271
07 Maintenance and service
Fuses
Engine compartment
07
272
07 Maintenance and service
Fuses
General fuses, engine compartment
On the inside of the cover there are tweezers
that facilitate the procedure for the removal
and fitting of fuses.
Positions (see preceding illustration)
Function
A
Function
A
Primary fuse for the central electronic module
(CEM) with fuse box B
under the glovebox
50
Windscreen wipers
30
Parking heater*
25
Ventilation fan
40
Primary fuse for the central electronic module
(CEM) with fuse box B
under the glovebox
50
Primary fuse for central
electrical unit in cargo area
60
Primary fuse for central
electrical unit in passenger
compartment with fuse
box A under the glovebox
60
Primary fuse for central
electrical unit in passenger
compartment with fuse
box A under the glovebox
60
Engine compartment, upper
Engine compartment, front
Engine compartment, lower
These fuses are all located in the engine compartment box. The fuses in (C) are located
under (A).
• Fuses 1-7 and 42-44 are of the "Midi Fuse"
type and must only be replaced by a workshop1.
• Fuses 8-15 and 34 are of the "JCASE" type
and should be replaced by a workshop1.
•
Fuses 16-33 and 35-41 are of the "Mini
Fuse" type.
-
1
-
-
ABS pump
40
ABS valves
20
-
-
Headlamp levelling*
(Xenon, Active Xenon)
10
Primary fuse for the central electronic module
(CEM) with fuse box B
under the glovebox
20
ABS
5
-
07
100
Speed related power
steering*
5
PTC element air preheater*
20
Engine control module,
Transmission control
module, Airbags
10
Headlamp washers*
An authorised Volvo workshop is recommended.
``
* Option/accessory, for more information, see Introduction.
273
07 Maintenance and service
Fuses
07
Function
A
Function
A
Function
A
Heated washer nozzles*
10
Compressor A/C
15
10
Relay coil, relay, vacuum
pump (5-cyl. petrol and
2.0T)
5
Relay coil, relay, compressor A/C
5
5
Actuator solenoid, starter
motor
30
Headlamp control
Engine valves, Engine
control module (6-cyl.)
Solenoids, cam profile (6cyl.) Actuator motors,
intake manifold (6-cyl.)
Mass air flow sensor (4cyl. 2.0 l petrol)
-
-
10
-
-
-
Ignition coils (5, 6-cyl. petrol)
20
Lambda-sond (4-cyl. petrol, 5-cyl. diesel), Control
module, radiator roller
cover (D3 manual)
10
-
Ignition coils (4-cyl. petrol), Glow control module
(diesel)
5
Ignition coils (8-cyl.)
Auxiliary lamps*
20
Engine control module
(petrol)
10
EVAP valve (5, 6-cyl. petrol), Lambda-sonds (5, 6cyl. petrol)
15
Internal relay coils
Horn
15
10
Engine control module
(diesel)
15
Relay coil, main relay,
engine management system
Valves (1.6 l petrol)
10
Mass air flow sensor (5cyl. diesel), Control valves
(5-cyl. diesel), Injectors (5,
6-cyl. petrol), Engine control module (6-cyl.)
15
Engine control module (5,
6-cyl. petrol)
Engine control module (8cyl.)
Transmission control
module
274
15
* Option/accessory, for more information, see Introduction.
Injectors (8-cyl.)
EVAP valve (8-cyl.)
Lambda-sonds (8-cyl.)
Coolant pump (8-cyl.)
10
Vacuum pump (4-cyl. 2.0 l
petrol), Crankcase ventilation heater (5-cyl.), Diesel
filter heater (5-cyl.)
20
Glow plugs (diesel)
70
07 Maintenance and service
Fuses
Function
A
Cooling fan (4-cyl., 5-cyl.
petrol)
60
Cooling fan (6-cyl. petrol,
5-cyl. diesel)
80
Cooling fan (8-cyl.)
Electro-hydraulic power
steering
100
07
``
275
07 Maintenance and service
Fuses
Under the glovebox
Positions
Box
A
07
276
Function
A
Primary fuse for audio
control module*
40
-
-
-
-
-
-
-
-
Box
A
* Option/accessory, for more information, see Introduction.
Function
A
-
-
12 V socket cargo area*,
Refrigerator*
15
Control panel, driver's
door
20
Control panel, front passenger door
20
Box
A
Function
A
Control panel, rear passenger door, right
20
Control panel, rear passenger door, left
20
Keyless*
20
Power seat driver's side*
20
07 Maintenance and service
Fuses
Box
A
Function
A
Power seat passenger
side*
Folding head restraint*
RTI control module*
Function
A
20
12 V socket, tunnel console
15
15
Rear Seat Entertainment
(RSE)*
10
RTI display*
Satellite radio*, Digital
radio*
Audio
15
Infotainment control module
Phone*
5
BluetoothTM*
Sun roof*, Interior lighting
roof, Climate sensor
5
Box
A
Box
B
Function
A
-
-
-
-
Interior lighting, Driver's
door control panel, power
windows, Power seats,
front*, Remote controlled
garage door opener*
7.5
Information display (DIM)
5
Adaptive cruise control,
ACC*, collision warning
system*
10
15
Interior lighting, Rain sensor
7.5
Seat heating, rear passenger side left*
15
Steering wheel module
7.5
5
Central locking system
rear, Central locking system fuel filler flap
10
Parking assistance*, Parking camera*, Towbar control module *
AWD control module*
10
Active chassis Four-C*
10
Seat heating (passenger
side)
15
Seat heating (driver's side)
15
Massage seats, front*,
Armrest lighting*, Refrigerator lighting*, Relay coil,
relay, refrigerator*
10
Seat heating, rear passenger side right*
-
07
-
Windscreen washers
15
Opening boot lid
10
``
* Option/accessory, for more information, see Introduction.
277
07 Maintenance and service
Fuses
Box
B
07
278
Function
A
-
-
Fuel pump
20
Remote control key
receiver, Movement detector alarm*, Climate panel
5
Steering lock
15
Siren alarm*, Data link connector OBDII
5
-
-
Box
B
A
Function
A
Sunroof*
20
Immobiliser
5
Only Performance.
At dashboard - Executive*
Airbags
10
Collision warning system
5
Accelerator pedal, PTC
element air preheater*,
Dimming, interior rearview
mirror*, Seat heating, rear*
7.5
InfotainmentA, AudioA,
Rear Seat Entertainment
(RSE)*
15
Brake light
5
The central electrical unit is located behind the
side panel on the passenger side.
NOTE
For any fuse replacement the recommendation is that the car is taken into an authorised Volvo workshop.
* Option/accessory, for more information, see Introduction.
Function
A
Analogue clock
5
07 Maintenance and service
Fuses
Cargo area
The fuse box is located behind the upholstery on the left-hand side.
Positions
Function
A
Electric parking brake, left
30
Electric parking brake, right
30
Rear window defroster
30
Trailer socket 2*
15
Function
A
-
-
-
-
-
-
-
-
Trailer socket 1*
-
-
-
-
-
07
40
-
* Option/accessory, for more information, see Introduction.
279
07 Maintenance and service
Car care
Washing the car
IMPORTANT
Wash the car as soon as it becomes dirty.
Wash the car in a car wash with oil separator.
Use car shampoo.
Dirty headlamps have impaired functionality. Clean them regularly, when refuelling for
example.
• Remove bird droppings from the paintwork
as soon as possible. Bird droppings contain chemicals that affect and discolour
paintwork very quickly. An authorised
Volvo workshop is recommended for the
removal of any discoloration.
NOTE
Outside lighting such as headlamps, fog
lamps and rear lamps may temporarily have
condensation on the inside of the lens. This
is normal, all exterior lighting is designed to
withstand this. Condensation is normally
vented out of the lamp housing when the
lamp has been switched on for a time.
• Hose down the underbody.
• Rinse the entire car to remove loose dirt.
High-pressure washing
For cleaning:
Testing the brakes
Dry the car using a clean, soft chamois or
a water scraper.
• Use cold degreasing agent on very dirty
WARNING
Always have the engine cleaned by a workshop. There is a risk of fire if the engine is
hot.
Cleaning the wiper blades
Set the wiper blades in service position,
see page 266.
NOTE
Wash the wiper blades and windscreen regularly with lukewarm soap solution or car
shampoo.
Do not use any strong solvents.
280
During the first few months a new car must
only be handwashed. This is because the
paintwork is more sensitive when it is new.
surfaces.
soap solution or car shampoo.
07
NOTE
Asphalt, dust and salt residue on wiper blades,
as well as insects, ice etc. on the windscreen,
impair the service life of wiper blades.
Wash using a sponge, car shampoo and
plenty of lukewarm water.
• Clean the wiper blades with a lukewarm
•
An automatic car wash is a simple and quick
way of washing the car, but it cannot reach
everywhere. Handwashing the car is recommended for achieving optimum results.
When using high-pressure washing, use
sweeping movements and make sure that the
nozzle does not come closer than 30 cm to the
surface of the car (the distance applies to all
exterior parts). Do not spray directly onto the
locks.
Do not spray directly onto the locks.
•
Automatic car washes
WARNING
Always test the brakes after washing the
car, including the parking brake, to ensure
that moisture and corrosion do not attack
the brake linings and reduce braking performance.
Lightly depress the brake pedal now and then
when driving long distances in rain or slush.
The heat from the friction causes the brake lin-
07 Maintenance and service
Car care
ings to warm up and dry. Do the same thing
after starting in very damp or cold weather.
Exterior plastic, rubber and trim
components
A special cleaning agent available from Volvo
dealers is recommended for the cleaning and
care of coloured plastic parts, rubber and trim
components, such as glossy trim mouldings.
When using such a cleaning agent the instructions must be followed carefully.
IMPORTANT
Avoid waxing and polishing on plastic and
rubber.
When using degreasant on plastic and rubber, only rub with light pressure if it is necessary. Use a soft washing sponge.
Polishing glossy trim mouldings could wear
away or damage the glossy surface layer.
Polishing agent that contains abrasive must
not be used.
Rims
Only use rim cleaning agent recommended by
Volvo.
Strong rim cleaning agents can damage the
surface and cause stains on chrome-plated
aluminium rims.
Polishing and waxing
Water-repellent coating*
Polish and wax the car if the paintwork is dull
or to give the paintwork extra protection.
Never use products such as car wax,
degreaser or similar on glass surfaces as this could ruin their water-repellent
properties.
The car does not need to be polished until it is
at least one year old. However, the car can be
waxed during this time. Do not polish or wax
the car in direct sunlight.
Wash and dry the car thoroughly before you
begin polishing or waxing. Clean off asphalt
and tar stains using tar remover or white spirit.
More stubborn stains can be removed using
fine rubbing paste designed for car paintwork.
Polish first with a polish and then wax with liquid or solid wax. Follow the instructions on the
packaging carefully. Many preparations contain both polish and wax.
IMPORTANT
Only paint treatment recommended by
Volvo should be used. Other treatment such
as preserving, sealing, protection, lustre
sealing or similar could damage the paintwork. Paintwork damage caused by such
treatments is not covered by Volvo warranty.
Take care when cleaning so as not to damage
the glass surface.
To avoid damaging glass surfaces when
removing ice – only use plastic ice scrapers.
There is natural wear of the water-repellent
coating.
Treatment with a special finishing agent available from Volvo dealers is recommended in
order to maintain the water-repellent properties. This should be used first after three years
and then each year.
Rustproofing – inspection and
maintenance
The car received a thorough and complete
rustproofing at the factory. Parts of the body
are made of galvanised sheet metal. The
underbody is protected by a wear-resistant
anti-corrosion compound. A thin, penetrating
rustproofing fluid was sprayed into the
exposed members, cavities, closed sections
and side doors.
07
``
* Option/accessory, for more information, see Introduction.
281
07 Maintenance and service
Car care
Under normal conditions the rustproofing does
not require treatment for approximately 12
years. After this period, it should be treated at
three-year intervals. Volvo recommends that
you engage an authorised Volvo workshop for
assistance if the car needs further treatment.
Dirt and road salt can lead to corrosion so it is
important to keep the car clean. The car's rustproofing needs to be checked regularly and
touched-up if necessary in order for it to be
maintained.
Cleaning the interior
Only use cleaning agents and car care products recommended by Volvo. Clean regularly
and follow the instructions included with the
car care product.
Vacuuming is important prior to using cleaning
agents.
Carpets and cargo area
07
Remove inlaid carpets for separate cleaning of
the floor carpet and the inlaid carpets. Use a
vacuum cleaner to remove dust and dirt.
Each inlay mat is secured with pins.
Take hold of the inlay mat at each pin and
lift the mat straight up.
Fit the inlay mat in place by pressing it in at
each pin.
282
WARNING
Before setting off check that the inlaid mat
in the driver area is firmly affixed and
secured in the pins in order to avoid getting
caught adjacent to and under the pedals.
A special textile cleaner is recommended for
stains on the floor mat after vacuuming. Floor
mats should be cleaned with agents recommended by your Volvo dealer!
Stains on fabric upholstery and roof
upholstery
A special fabric cleaning agent, available from
authorised Volvo dealers, is recommended to
avoid impairing the fire retardant qualities of
the upholstery.
teristics. It is given a protective coating, but
regular cleaning is required in order to maintain
both characteristics and appearance. Volvo
offers a comprehensive product for the cleaning and treatment of leather upholstery which,
when used in accordance with the instructions,
preserves the leather's protective coating.
After a period of use the natural appearance of
the leather will nevertheless emerge, depending more or less on the surface texture of the
leather. This is a natural maturing of the leather
and shows that it is a natural product.
To achieve best results Volvo recommends
cleaning and the application of protective
cream once to four times per year (or more if
necessary). The Volvo Leather Care kit is available from your Volvo dealer.
IMPORTANT
IMPORTANT
Sharp objects and Velcro may damage the
fabric upholstery.
Treating stains on leather upholstery
Volvo's leather upholstery is chromium-free
and approved in accordance with the OekoTex 100 standard and is treated to preserve its
original appearance.
Leather upholstery ages and acquires a beautiful patina over time. The leather is refined and
processed so that it retains its natural charac-
•
Certain items of coloured clothing (for
example, jeans and suede garments)
may stain the upholstery.
•
Never use strong solvents. Such products may damage fabric, vinyl and
leather upholstery.
Washing instructions for leather
upholstery
1. Pour the leather cleaner on the dampened
sponge and squeeze out a strong foam.
07 Maintenance and service
Car care
2. Work the dirt away with gentle circular
movements.
3. Dab accurately with the sponge on the
stains. Allow the sponge to absorb the
stain. Do not rub.
4. Wipe off with soft paper or a cloth and
allow the leather to dry completely.
Protective treatment of leather
upholstery
If the steering wheel has stains:
Group 1 (ink, wine, coffee, milk, sweat and
blood)
Use a soft cloth or sponge. Mix a 5%
ammonia solution. (For blood stains, use a
solution of 2 dl water and 25g salt.)
Group 2 (fats, oils, sauces and chocolate)
1. Same procedure as group I.
1. Pour a small amount of the protective
cream on the felted cloth and massage in
a thin layer of cream with gentle circular
movements on the leather.
2. Polish with an absorbent paper or cloth.
2. Allow the leather to dry for 20 minutes
before use.
2. Same procedure as group I.
The leather has now been given improved protection against stains and improved UV protection.
Washing instructions for the leather
steering wheel
• Remove dirt and dust with a soft pre-moistened sponge and neutral soap.
• Leather needs to breathe. Never cover the
leather steering wheel with protective plastic.
• Use natural oils. Volvo's leather care
agents are recommended for best results.
1
Group 3 (dry dirt, dust)
1. Use a soft brush to remove the dirt.
Treating stains on interior plastic, metal
and wood parts
Volvo dealer. Make sure the seatbelt is dry
before allowing it to retract.
Touching up minor paintwork damage
Paint is an important part of the car's rustproofing and should therefore be checked regularly. To avoid the onset of rust, damaged
paintwork should be rectified immediately. The
most common types of paintwork damage are
stone chips, scratches, and marks on the
edges of wings and doors.
Materials
• primer in a can
• spray can or touch-up pen1
• masking tape
A fibrillated fibre or microfibre cloth, lightly
moistened with water, available from Volvo
dealers, is recommended for cleaning interior
parts and surfaces.
Do not scrape or rub stains. Never use strong
stain removers. A special cleaning agent available from Volvo dealers can be used for more
difficult cleaning.
07
Cleaning seatbelts
Use water and a synthetic detergent. A special
textile cleaning agent is available from your
Follow the instructions that are included with the package for the touch-up pen.
``
283
07 Maintenance and service
Car care
Before work is begun, the car must be clean
and dry and at a temperature above 15 °C.
Colour code
1. Apply a piece of masking tape over the
damaged surface. Then remove the tape to
remove any loose paint.
2. Stir the primer well and apply using a fine
brush or a matchstick. Apply paint using a
brush once the primer is dry.
3. For scratches, proceed as above, but
mask around the damaged area to protect
the undamaged paintwork.
Car colour code
It is important that the correct colour is used.
For product decal location, see page 288.
4. After a few days, polish the touched-up
areas. Use a soft rag and a small amount
of lapping paste.
NOTE
Repairing stone chips
If the stone chip has not penetrated to the
bare metal and there is an undamaged colour coat, you can paint straight after cleaning the damaged surface.
G021832
07
284
07 Maintenance and service
07
285
Type designations.................................................................................
Dimensions and weights.......................................................................
Engine specifications............................................................................
Engine oil...............................................................................................
Fluids and lubricants.............................................................................
Fuel.......................................................................................................
Wheel and tyres, dimensions and pressure .........................................
Electrical system...................................................................................
Type approval.......................................................................................
Symbols in the display..........................................................................
286
288
290
294
295
297
299
300
302
303
304
SPECIFICATIONS
08 Specifications
Type designations
Label location
08
288
08 Specifications
Type designations
Knowing the car's type designation, vehicle
identification and engine numbers can facilitate all contact with an authorised Volvo dealer
regarding the car and when ordering spare
parts and accessories.
Type designation, vehicle identification
number, maximum permissible weights,
codes for colour and upholstery and type
approval number. The label is visible when
the right rear door is opened.
NOTE
The labels shown in the owner's manual are
not provided as exact reproductions of
those in the car. The purpose is to show
their approximate appearance and location
in the car. The information that applies to
your car in particular is available on the label
in question in your car.
Label for parking heater.
Engine code, component and serial numbers.
The engine oil label specifies oil grade and
viscosity.
Gearbox type designation and serial number.
Manual gearbox
Automatic gearbox
Car's identification number. (VIN Vehicle
Identification Number)
Further information on the car is presented in
the registration document.
08
289
08 Specifications
Dimensions and weights
Dimensions
Dimensions
A
B
08
290
Wheelbase
Length
mm
2835
G
Dimensions
mm
Front track
1588A
4851
1578B
1585A
C
Load length, floor, folded seat
1927
D
Load length, floor
1094
E
Height
1493
F
Load height
368
H
Rear track
1575B
I
Load width, floor
1130
A
B
Dimensions
mm
J
Width
1861
K
Width including door mirrors
2106
with 16" wheel
with 17" wheel
08 Specifications
Dimensions and weights
Weights
Kerb weight includes the driver, the fuel tank
90% full and all fluids.
The weight of passengers and accessories,
and towball load (when a trailer is hitched, see
table page 292) influences the payload and is
not included in the kerb weight.
WARNING
The car's driving characteristics change
depending on how heavily it is loaded and
how the load is distributed.
Permitted max. load = Gross vehicle weight Kerb weight.
NOTE
The documented kerb weight applies to
cars in the standard version - i.e. a car without extra equipment or accessories. This
means that for every accessory added the
loading capacity of the car is reduced correspondingly by the weight of the accessory.
For information on decal location, see page 288.
Examples of accessories that reduce loading capacity are the Kinetic/Momentum/
Summum equipment levels, as well as other
accessories such as Towbar, Load carriers,
Space box, Audio system, Auxiliary lamps,
GPS, Fuel-driven heater, Safety grille, Carpets, Cargo cover, Power seats, etc.
Max. gross vehicle weight
Weighing the car is a certain way of ascertaining the kerb weight of your own particular car.
Equipment level
Max. train weight (car+trailer)
Max. front axle load
Max. rear axle load
Max. load: See registration document.
Max. roof load: 100 kg.
08
``
291
08 Specifications
Dimensions and weights
Towing capacity and towball load
Engine
Gearbox
Max. weight braked trailer (kg)
Max. towball load (kg)
2.0F
Automatic, MPS6
1000
50
All
All (except 2.0F with Automatic, MPS6)
1200
50
2.0F
Manual, MTX75
1320
75
2.0T
Manual, MMT6
1800
90
2.0T
Automatic, MPS6
1800
90
2.5FT
Manual, M66
1600
75
2.5FT
Automatic, TF-80SC
1800
90
2.5T
Manual, M66
1600
75
2.5T
Automatic, TF-80SC
1800
90
T4
Manual, MMT6
1600
75
T4
Automatic, MPS6
1600
75
T5
Manual, MMT6
1800
90
T5
Automatic, MPS6
1800
90
3.2
Automatic, TF-80SC
1800
90
Automatic, TF–80SC AWD
08
292
T6 AWD
Automatic, TF-80SC
2000
90
D3
Manual, M66
1600
75
08 Specifications
Dimensions and weights
Engine
Gearbox
Max. weight braked trailer (kg)
Max. towball load (kg)
D3
Automatic, TF-80SC
1600
75
D5
Manual, M66
1600
75
D5
Automatic, TF-80SC
2000
90
Automatic, TF–80SC AWD
Max. weight unbraked trailer (kg)
750
Max. towball load (kg)
50
NOTE
The use of a stabiliser hitch on the towing
bracket is recommended for trailers heavier
than 1800 kg.
08
293
08 Specifications
Engine specifications
Engine specifications
A
08
294
Model
Engine
code
Output
(kW/rpm)
Output
(hp/rpm)
Torque (Nm/
rpm)
No. of
cylinders
Bore
(mm)
Stroke
(mm)
Swept
volume
(litres)
Compression
ratio
2.0F
B4204S4
107/6000
145/6000
190/4500
4
87,5
83.1
1.999
10.8:1
2.5FT
B5254T8A
147/4800
200/4800
300/1500–4500
5
83.0
93.2
2.521
9.0:1
2.5FT
B5254T11
170/4800
231/4800
340/1700-4800
5
83.0
93.2
2.521
9.0:1
2.0T
B4204T6
149/6000
203/6000
300/1750–4000
4
87,5
83.1
1.999
10.0:1
2.5T
B5254T10
170/4800
231/4800
340/1700-4800
5
83.0
93.2
2.521
9.0:1
T4
B4164T
132/5700
180/5700
240/1600-5000
4
79
81.4
1,595
10.0:1
T5
B4204T7
177/5500
240/5500
320/1800-5000
4
87,5
83.1
1.999
10.0:1
3.2
B6324S5
179/6400
243/6400
320/3200
6
84
96
3.192
10.8:1
T6
B6304T4
224/5600
304/5600
440/2100–4200
6
82.0
93.2
2.953
9.3:1
D3
D5204T2
120/2900
163/2900
400/1400–2850
5
81.0
77
1.984
16.5:1
D5
D5244T10
151/4000
205/4000
420/1500–3250
5
81.0
93.15
2.400
16.5:1
Certain markets
08 Specifications
Engine oil
Adverse driving conditions
Adverse driving conditions can lead to abnormally high oil temperature or oil consumption.
Below are some examples of adverse driving
conditions.
Check the oil level more frequently for long
journeys:
•
•
•
•
towing a caravan or trailer
in mountainous regions
Volvo recommends Castrol oil products.
IMPORTANT
In order to fulfil the requirements for the
engine's service intervals all engines are
filled with a specially adapted synthetic
engine oil at the factory. The choice of oil
has been made very carefully with regard to
service life, starting characteristics, fuel
consumption and environmental impact.
The above also apply to shorter driving distances at low temperatures.
An approved engine oil must be used in
order that the recommended service intervals can be applied. Only use a prescribed
grade of oil for both filling and oil change,
otherwise you will risk affecting service life,
starting characteristics, fuel consumption
and environmental impact.
Choose a fully synthetic engine oil for adverse
driving conditions. It provides extra protection
for the engine.
Volvo Car Corporation disclaims all warranty liability if engine oil of the prescribed
grade and viscosity is not used.
at high speeds
in temperatures colder than -30 °C or hotter than +40 °C
Viscosity chart
08
``
295
08 Specifications
Engine oil
Engine oil grade
Engine variant
Engine code
Volume, incl. oil filter
(litres)
B5254T8A
Oil grade: ACEA A5/B5
5.5
2.5FT
B5254T11
Viscosity: SAE 0W–30
5.5
2.5T
B5254T10
5.5
3.2
B6324S5
6.8
T6
B6304T4
6.8
D3
D5204T2
5.9
D5
D5244T10
5.9
2.0F
B4204S4
Oil grade: ACEA A5/B5
4.3
B4204T6
Viscosity: SAE 5W–30
5.4
2.5FT
2.0T
A
T4
B4164T
T5
B4204T7
Certain markets
For filling engine oil, see page 253.
08
296
When driving under adverse conditions, use ACEA A5/B5 SAE 0W-30.
4.1
5.4
08 Specifications
Fluids and lubricants
Other fluids and lubricants
Manual gearbox
Volume (litres)
MMT6
1.7
MTX75
1.8
M66
1.9
Automatic gearbox
BOT 350M3
Volume (litres)
MPS6
7.3
TF-80SC
7.0
A
B
Prescribed transmission fluid
Prescribed transmission fluid
BOT 341
JWS 3309A
AW1B
Only applies to 2.5FT and 2.5T.
Applies to others.
Fluid
System
Volume (litres)
Coolant
2.0F
7.8
T5
10.5
2.0T, 2.5T, 2.5FT, 3.2
and T6
8.9
D3 and D5
8.9
T4, Manual select
9.2
T4, Automatic
9.8
Prescribed grade
Coolant recommended by Volvo mixed with 50% waterA, see the packaging.
08
``
297
08 Specifications
Fluids and lubricants
Fluid
System
Volume (litres)
Brake fluid
Brake system
Power steering
fluid
Power steering
Washer fluid
Cars with headlamp
washing
6.5
Cars without headlamp
washing
4.5
0.6
–
Prescribed grade
DOT 4+
WSS M2C204-A2 or equivalent product.
Use a washer antifreeze recommended by Volvo, mixed with water.
Fuel
A
Petrol engine
approx. 70
Petrol: see page 218
Diesel engine
approx. 70
Diesel: see page 219
Water quality must fulfil the standard STD 1285.1.
NOTE
Under normal driving conditions, the gearbox oil does not need to be changed during
its service life. However, this may be necessary under adverse driving conditions,
see page 297.
08
298
08 Specifications
Fuel
See further information and more advice on
pages 12 and 214.
Fuel consumption
See page 218 for general information on fuel.
There are several causes that can affect fuel
consumption negatively. Examples of this are:
• The driver's driving style.
• If the customer has specified wheels larger
than those fitted as standard on the model's basic version, then resistance increases.
• High speed results in increased wind resistance.
• Fuel quality, road and traffic conditions,
weather and the condition of the car.
Even a combination of the above-mentioned
examples can result in significantly improved
consumption.
To bear in mind
Tips that the driver can use in order to reduce
consumption:
• Drive gently and avoid unnecessary acceleration as well as braking too hard.
• Drive with the correct air pressure in the
tyres and check this regularly - select ECO
tyre pressure for best results, see the tyre
pressure table on page 300.
08
• Choice of tyres can affect fuel consumption - seek advice on suitable tyres from a
dealer.
299
08 Specifications
Wheel and tyres, dimensions and pressure
Approved tyre pressures
Variant
Tyre size
Speed
Load, 1-3 persons
Max. load
ECO pressureA
(km/h)
225/55 R 16
Front
Rear
Front
Rear
Front/rear
(kPa)B
(kPa)
(kPa)
(kPa)
(kPa)
0-160
230
210
260
260
260
160 +
280
280
290
290
-
0-160
230
210
260
260
260
160 +
270
270
290
290
-
0-160
220
210
260
260
260
160 +
260
260
270
270
-
0-160
230
210
260
260
260
160 +
260
260
270
270
-
225/50 R 17
3.2
245/45 R 17
T6
245/40 R 18
225/55 R 16
225/50 R 17
D5
245/45 R 17
245/40 R 18
08
300
08 Specifications
Wheel and tyres, dimensions and pressure
Variant
Tyre size
Speed
Load, 1-3 persons
Max. load
ECO pressureA
(km/h)
2.5T
225/55 R 16
2.0T
225/50 R 17
2.5FTC
245/45 R 17
D3
T5
205/60 R 16
T4
245/40 R 18
Front
Rear
Front
Rear
Front/rear
(kPa)B
(kPa)
(kPa)
(kPa)
(kPa)
0-160
220
210
260
260
260
160 +
260
260
270
270
-
0-160
230
210
260
260
260
160 +
260
260
270
270
-
max. 80
420
420
420
420
-
DRIVe
Temporary Spare Tyre
A
B
C
Economical driving.
In certain countries there is the "bar" unit beside the SI unit "Pascal": 1 bar = 100 kPa.
245/45 R17 and 245/40 R18 are not approved for 2.5FT.
08
301
08 Specifications
Electrical system
Electrical system
The car has a voltage-regulated AC alternator.
The electrical system is single-pole and uses
the chassis and engine casing as a conductor.
The battery capacity is dependent upon the
equipment level in the vehicle.
IMPORTANT
If the battery is replaced, replace it with a
battery of the same cold start capacity and
reserve capacity as the original (see the
decal on the battery).
Battery
Voltage (V)
08
302
Cold start capacity,
Reserve capacity
CCA - Cold Cranking Amperes (A)
(minutes)
12
520–800
100–160
12
520–700
100–135
12
600–800
120–160
12
700–800
135–160
08 Specifications
Type approval
Remote control system
Country
A, B, CY,
CZ, D, DK,
E, EST, F,
FIN, GB,
GR, H, I,
IRL, L, LT,
LV, M, NL,
P, PL, S,
SK, SLO
Radar system
Country
Singapore
Delphi hereby certifies
that this remote control key
system conforms to the
essential characteristic
requirements and other relevant regulations of directive
1999/5/EC.
IDA: Infocomm Development
Authority of Singapore.
Brazil
IS, LI, N, CH
HR
ROK
Delphi 2003-07-15, Germany
R-LPD1-03-0151
BR
RC
CCAB06LP1940T4
08
303
08 Specifications
Symbols in the display
General
There are a variety of different symbols in the
display in the car. The symbols are divided into
warning, indicator and information symbols.
Shown below are the most common symbols
with their meanings and a reference to where
in the manual further information can be found.
For more information on symbols and text
messages, see pages 64, 65 and 128.
Symbols in the display
Indicator and warning symbols in the
combined instrument panel
Symbol
illuminates
The red warning symbol
when a fault has been indicated which could
affect the safety and/or driveability of the car.
At the same time an explanatory text is displayed in the information display.
illumiThe yellow information symbol
nates, in combination with text in the information display, when a deviation in any of the car's
systems has occurred. The yellow symbol
information can also illuminate in combination
with other symbols.
08
304
* Option/accessory, for more information, see Introduction.
Indicator and information symbols in the
combined instrument panel
Symbol
Meaning
Page
Fault in the ABL system*
64, 79
Emissions system
64
Fault in the ABS system
64, 114
Rear fog lamp on
64, 81
Meaning
Page
Low oil pressure
65
Parking
brake
65, 115, 116
Airbags SRS
19, 65
Seatbelt
reminder
16, 65
Stability system,
DSTC
64, 162
Alternator
not charging
65
Engine preheater
(diesel)
64
Fault in the
brake system
65, 114
Low level in fuel tank
64, 139
Warning,
safety mode
19, 30, 65, 67,
110
Information, read display text
64
Main beam on
64, 79
Left-hand direction
indicators
64
Right-hand direction
indicators
64
08 Specifications
Symbols in the display
Symbol
Meaning
Page
Adaptive cruise
control*
165, 169,
173
Adaptive cruise
control*
173
Adaptive cruise
control*, Distance
Alert*
173, 176
Adaptive cruise
control*, Distance
Alert*
173, 176
Adaptive cruise
control*
173
Adaptive cruise
control*, Distance
Alert*
169, 175
Adaptive cruise
control*, Distance
Alert*
169, 175
Adaptive cruise
control*
169
Symbol
G025102
Other information symbols in the
combined instrument panel
Meaning
Page
Radar sensor*
Symbol
Meaning
Page
173, 176,
183
Driver Alert System*
186
Camera sensor*,
Laser sensor*
183, 186,
189
Driver Alert System*, Lane Departure Warning*
186, 189
Auto Brake*, Distance Alert*, Collision warning system*
176, 183
Driver Alert System*, Lane Departure Warning*
189
139
Driver Alert System*, Time for a
break
186
Fuel-driven engine
block heater and
passenger compartment heater*
ABL system*
79
Information symbols in the centre
console display
Symbol
Fuel filler flap, righthand side
217
Low battery
139
Parking brake
116
Rain sensor*
87
Meaning
Page
Audio files
147
Directory in CD disc
147
Traffic information
149
Phone*
203,
208
08
``
* Option/accessory, for more information, see Introduction.
305
08 Specifications
Symbols in the display
Symbol
Meaning
Page
BluetoothTM handsfree*
204,
206
Parking assistance*
191
Information symbols in the roof console
display
Symbol
Meaning
Page
Seatbelt reminder
17
Airbag, passenger
seat, activated
22, 23
Airbag, passenger
seat, deactivated
23
08
306
* Option/accessory, for more information, see Introduction.
08 Specifications
08
307
09 Alphabetical Index
09
A
ACC – Adaptive cruise control................. 167
Active Bending Lights (ABL)...................... 79
Air conditioning, AC................................. 135
Air distribution.................................. 132, 137
Air vents................................................... 132
Audio volume
phone.................................................. 205
phone/media player............................ 205
ring signal, phone............................... 205
Adaptive cruise control fault tracing........ 172
Alarm..........................................................
alarm indicator......................................
alarm signals.........................................
arming...................................................
checking the alarm...............................
deactivating..........................................
deactivating a triggered alarm..............
reduced alarm level..............................
temporary disarming of the alarm........
testing the alarm system......................
Additional heater (Diesel)......................... 141
Alcolock..................................................... 97
Automatic gearbox..................................
manual gear positions (Geartronic).....
towing and recovery...........................
trailer...................................................
Adjusting headlamp pattern...................... 83
halogen headlamp................................ 84
Allergy and asthma inducing substances.................................................... 131
Automatic relocking................................... 51
Adjusting the steering wheel...................... 77
All-wheel drive, AWD............................... 112
Auxiliary heater........................................ 141
Airbag
activating/deactivating, PACOS........... 22
driver's and front passenger side......... 20
key switch off........................................ 22
All Wheel Drive (AWD).............................. 112
AUX input................................................. 142
Approach light, duration............................ 83
AWD, All-wheel drive............................... 112
Audio
headphones socket............................
rear control panel................................
settings...............................................
surround.............................................
B
Active chassis – FOUR-C........................ 164
Active Xenon headlamps........................... 79
Adaptation............................................... 104
Adapting driving characteristics.............. 164
Adaptive cruise control............................ 167
fault tracing......................................... 172
radar sensor........................................ 171
AIRBAG ..................................................... 20
Airbag system ........................................... 19
Air conditioning........................................ 135
general................................................ 130
56
56
56
56
42
56
56
57
57
57
Audio system........................................... 142
functions............................................. 143
overview.............................................. 142
143
143
143
142
Auto
climate control settings...................... 134
Automatic car washes............................. 280
106
107
231
226
Automatic locking...................................... 51
Backrest..................................................... 71
front seat, lowering............................... 71
Backrest rear seat, lowering...................... 73
308
09 Alphabetical Index
09
filling brake fluid.................................. 257
symbols in the combined instrument
panel................................................... 114
Catalytic converter................................... 218
recovery.............................................. 231
Built-in phone.......................................... 208
Chassis settings...................................... 164
Bulbs, see Lighting.................................. 259
Checking and topping up the coolant..... 256
Bag holder .............................................. 223
Battery............................................. 268, 302
maintenance....................................... 268
remote control key/PCC....................... 46
start assistance................................... 105
symbols on the battery....................... 268
warning symbols................................. 268
Bioethanol E85........................................ 219
Blind spot (BLIS)...................................... 194
Checking the engine oil level................... 253
C
Bluetooth
handsfree............................................ 203
mute microphone............................... 205
transfer call to mobile......................... 205
Calls
functions during a call................ 208, 209
incoming..................................... 204, 209
operation..................................... 204, 208
volume in phone................................. 209
waiting................................................ 209
Bonnet, opening...................................... 252
Call waiting.............................................. 209
Boot lid
locking/unlocking.................................. 52
Camera sensor........................................ 181
Blind Spot Information System, BLIS...... 194
Brake and clutch fluid.............................. 257
Brake light.................................................. 80
Brakes...................................................... 113
anti-lock braking system, ABS........... 113
brake light............................................. 80
brake system...................................... 113
electric parking brake......................... 115
Emergency Brake Assistance, EBA ... 113
emergency brake lights........................ 80
Centre console........................................ 124
Children.....................................................
child safety locks..................................
child seats and side airbags.................
location in the car.................................
safety....................................................
31
36
24
31
31
Child safety locks...................................... 55
Child seat................................................... 31
Car care................................................... 280
Child seats.................................................
ISOFIX fixture system for child seats. . .
recommended......................................
upper mounting points for child seats..
Car care, leather upholstery.................... 282
Cigarette lighter socket............................ 199
Cargo area
loading................................................ 222
load retaining eyelets.......................... 223
mat...................................................... 202
Cleaning
automatic car washes.........................
car wash.............................................
rims.....................................................
seatbelts.............................................
upholstery...........................................
Car upholstery......................................... 282
Car wash.................................................. 280
31
36
33
36
280
280
281
283
282
Clean Zone Interior Package (CZIP)........ 131
309
09 Alphabetical Index
09
Climate control........................................ 130
general................................................ 130
sensors............................................... 130
Crash, see Collision................................... 30
Cruise control.......................................... 165
CZIP (Clear Zone Interior Package)......... 131
Clock
analogue............................................... 68
Clock, setting............................................. 67
CO2 emissions ........................................ 299
Collision..................................................... 30
Collision warning............................. 178, 179
Collision warning system
radar sensor................................ 171, 179
Collision Warning with Auto Brake*......... 178
Colour code, paint................................... 284
Combined instrument panel.................... 128
Comfort inside the passenger compartment......................................................... 198
Compass................................................... 94
calibration............................................. 94
setting the zone.................................... 94
310
Driving......................................................
cooling system....................................
with the boot lid open.........................
with trailer...........................................
214
214
215
225
Driving in water........................................ 214
D
DAB, menu structure............................... 153
Driving with a trailer
towball load........................................ 291
towing capacity.................................. 291
DAB Radio............................................... 152
DSTC, see also Stability control system.. 162
Deadlocks.................................................. 53
deactivation.......................................... 53
temporary deactivation......................... 54
Defroster.................................................. 135
Diesel....................................................... 219
Diesel particle filter.................................. 220
Dipstick, electronic.................................. 255
Direction indicators.................................... 81
Disengaging the gear selector inhibitor... 109
Display lighting.......................................... 78
Condensation in headlamps.................... 280
Distance Alert.......................................... 175
Controls
centre console.................................... 124
Dolby Surround Pro Logic II.................... 142
Cooler box............................................... 202
Driver Alert Control.................................. 185
Cooling system........................................ 214
Driver Alert System.................................. 185
Door mirrors............................................... 91
E
ECC, electronic climate control............... 133
Economical driving.................................. 214
ECO pressure.......................................... 243
Electrical socket...................................... 200
cargo area........................................... 223
front seat............................................. 200
Electric parking brake..............................
low battery voltage.............................
releasing automatically.......................
releasing manually..............................
115
115
116
116
Emergency calls...................................... 208
Emergency equipment
warning triangle.................................. 244
09 Alphabetical Index
09
Emergency puncture repair..................... 245
Engine
overheating......................................... 225
starting................................................ 101
Error messages in the Adaptive cruise control............................................................ 173
Expectant mothers, seatbelt...................... 17
External dimensions................................ 290
FSC, environmental labelling..................... 12
Engine block heater................................. 103
fuel-driven........................................... 138
Engine compartment
coolant................................................
oil........................................................
overview..............................................
power steering fluid............................
256
253
253
258
F
Fan........................................................... 133
Fault tracing for the camera sensor......... 182
First aid equipment.................................. 244
Engine oil......................................... 253, 295
adverse driving conditions.................. 295
capacities........................................... 295
filter..................................................... 253
oil grade.............................................. 295
First aid kit .............................................. 244
Engine specifications............................... 294
Fluids and oils.......................................... 297
Environmental labelling, FSC, owner's
manual....................................................... 12
FM, menu structure................................. 151
Error messages
Driver Alert Control............................. 186
Lane Departure Warning..................... 189
see Messages and symbols............... 173
Error messages in BLIS........................... 195
Error messages in Distance Alert............ 176
Front seat
adjusting front - rear............................. 76
lumbar................................................... 75
massage............................................... 75
Flexifuel.................................................... 103
adaptation........................................... 104
Fluids, capacities..................................... 297
Fog lamp
front...................................................... 80
Fuel..........................................................
fuel consumption................................
fuel economy......................................
fuel filter..............................................
218
299
243
220
Fuse box.................................................. 271
glovebox............................................. 276
Fuses.......................................................
box in cargo area................................
changing.............................................
general................................................
relay/fuse box in engine compartment....................................................
271
279
271
271
272
Fuse table
fuses in engine compartment............. 273
Fog lamps
rear........................................................ 81
G
Fog lamps, on/off...................................... 80
Gearbox................................................... 106
automatic............................................ 106
manual................................................ 106
Foot brake............................................... 113
FOUR-C – Active chassis........................ 164
Gear selector inhibitor............................. 108
311
09 Alphabetical Index
09
Gear selector inhibitor, mechanical disengagement................................................. 109
rear window.......................................... 93
seats................................................... 134
Information displays.................................. 63
Geartronic................................................ 107
Heat-reflecting windscreen........................ 89
Instrument lighting, see Lighting................ 78
Glass........................................................ 202
laminated/reinforced............................. 89
High engine temperature......................... 225
Glovebox................................................. 199
locking.................................................. 52
HomeLinkŸ .............................................. 118
Instrument overview
left-hand drive....................................... 60
right-hand drive.................................... 62
Home safe lighting..................................... 83
Instruments and controls........................... 60
Hoot........................................................... 77
Interior lighting, see Lighting..................... 82
Horn........................................................... 77
Interior rearview mirror............................... 93
automatic dimming............................... 93
Gross vehicle weight............................... 291
High-pressure headlamp washing............. 88
H
Hazard warning flashers............................ 81
Headlamp levelling.................................... 78
Headlamp pattern, adjusting..................... 83
Headlamp pattern adjustment
Active Bending Lights .......................... 84
Headlamps............................................... 259
Headphones socket................................. 143
Intermittent wiping..................................... 87
I
iPodŸ, connection................................... 145
IAQS – Interior Air Quality System........... 131
IC – Inflatable Curtain................................ 26
J
IDIS – Intelligent Driver Information System........................................................... 210
Jack......................................................... 241
Ignition keys............................................... 69
Immobiliser................................................ 40
K
Indicator lamps, PCC................................ 42
Kerb weight.............................................. 291
Heated washer nozzles.............................. 88
Inflatable curtain........................................ 26
Key............................................................. 40
Heating.................................................... 135
rearview and door mirrors.................... 93
Information and warning symbols............. 64
Key blade................................................... 43
Information button, PCC............................ 42
Keyless drive...................................... 48, 101
Head restraint
centre seat, rear.................................... 74
lowering................................................ 74
312
Inlaid mats............................................... 200
IMEI number............................................ 211
09 Alphabetical Index
09
Keyless start (keyless drive)............... 48, 101
Keylock.................................................... 108
Keypad in the steering
wheel................................. 77, 124, 165, 208
Key positions............................................. 69
L
Labels...................................................... 288
Laminated glass......................................... 89
Lamps, see Lighting................................ 259
Lane Departure Control........................... 188
Leather upholstery, washing instructions 282
Lighting.................................................... 259
Active Xenon headlamps...................... 79
approach light, duration....................... 83
automatic lighting, passenger compartment...................................................... 82
bulbs, specifications........................... 264
controls................................................. 82
display lighting...................................... 78
front fog lamps..................................... 80
headlamp levelling................................ 78
home safe lighting................................ 83
in passenger compartment................... 82
instrument lighting................................
main/dipped beam...............................
position/parking lamps.........................
rear fog lamp........................................
Lighting, bulb replacement......................
cargo area...........................................
dipped beam halogen.........................
direction indicators.............................
fog lamp..............................................
lamp housing, rear..............................
lamp housing, rear, direction indicators......................................................
main beam, Xenon lamp.....................
main beam halogen............................
number plate lighting..........................
parking lamps.....................................
side marker lamps..............................
vanity mirror........................................
78
78
80
81
259
264
260
261
262
262
Locks
automatic locking.................................
boot lid..................................................
locking..................................................
unlocking..............................................
51
52
51
51
Lubricants................................................ 297
Lubricants, capacities.............................. 297
M
262
261
260
263
261
262
264
Main/dipped beam, see Lightning............. 78
Light switches............................................ 78
Manual gear positions (Geartronic).......... 107
Loading
cargo area...........................................
general................................................
load retaining eyelets..........................
roof load.............................................
Massage
front seat............................................... 75
222
222
223
222
Lock confirmation ..................................... 40
Maintenance
rustproofing........................................ 281
Making calls..................................... 204, 208
Manual gearbox....................................... 106
towing and recovery........................... 231
Max. roof load ......................................... 291
Memory function in seats.......................... 72
Menus and messages.............................. 124
Locking/unlocking
inside.................................................... 51
313
09 Alphabetical Index
09
Menu structure
DAB.................................................... 153
FM....................................................... 151
Messages and symbols
Collision Warning with Auto Brake.....
Distance Alert.....................................
Driver Alert Control.............................
Lane Departure Warning.....................
183
176
186
189
Messages and symbols in the Adaptive
cruise control........................................... 173
Mobile phone
connect............................................... 206
handsfree............................................ 203
register phone..................................... 203
O
Oil, see also Engine oil............................. 295
Oil level low.............................................. 253
Overheating............................................. 225
Messages in the combined instrument
panel........................................................ 128
Owner's manual, environmental labelling.. 12
Messages in the information display....... 162
P
Misting.....................................................
attending to the windows...................
condensation in headlamps...............
remove with the air vents...................
timer function......................................
135
130
280
137
135
Passenger compartment filter................. 131
Passenger compartment heater
fuel-driven........................................... 138
PCC – Personal Car Communicator
functions............................................... 41
range............................................... 42, 43
Pedestrian detection................................ 178
Petrol grade............................................. 218
PACOS....................................................... 22
PACOS, switch.......................................... 22
Paintwork
colour code......................................... 284
damage and touch-up........................ 283
Panel lighting............................................. 78
Panic function............................................ 41
Parking assistance................................... 191
parking assistance sensors................ 193
Parking brake........................................... 115
314
138
138
138
140
Passenger compartment......................... 198
Messages in BLIS.................................... 195
Meters in the combined instrument panel
fuel gauge............................................. 64
speedometer......................................... 64
tachometer........................................... 64
Parking heater..........................................
battery and fuel...................................
parking on a hill..................................
time setting.........................................
Phone
built-in, overview................................
connect...............................................
handsfree............................................
incoming calls.....................................
making calls........................................
messages...........................................
on/off..................................................
phone book.........................................
phone book, shortcut.........................
receiving a call....................................
register phone.....................................
208
206
203
204
204
210
208
206
206
205
203
09 Alphabetical Index
09
Remote control key system, type approval............................................................ 303
Polishing.................................................. 281
Rearview and door mirrors
compass...............................................
door......................................................
electrically retractable...........................
heating..................................................
interior...................................................
Position/parking lamps.............................. 80
Rear window, defrosting............................ 93
Reverse gear inhibitor.............................. 106
Power seat................................................. 72
Recirculation............................................ 135
Powershift gearbox.......................... 109, 231
Recommendations during driving............ 214
Rims
cleaning.............................................. 281
Power sunroof........................................... 95
Recommended child seats, table.............. 33
Power windows......................................... 89
Recovery.................................................. 232
Privacy locking........................................... 45
Refrigerant............................................... 131
Puncture, see Tyres................................. 241
Refuelling.................................................
fuel cap...............................................
fuel filler flap, electrical opening.........
fuel filler flap, manual opening............
refuelling.............................................
ring signal........................................... 209
SIM card............................................. 211
Phone book............................................. 210
Pinch protection, sunroof.......................... 96
Putting calls on hold................................ 209
R
Radar sensor........................................... 167
limitations........................................... 171
Rain sensor................................................ 87
Rear bulbs
location............................................... 263
Rear control panel
audio system...................................... 143
94
91
92
93
93
217
217
217
217
217
Relay/fuse box: see Fuses....................... 271
Remote control, HomeLinkŸ
programmable ................................... 118
Remote control key...................................
battery replacement..............................
detachable key blade...........................
functions...............................................
range.....................................................
40
46
43
41
42
Resetting the door mirrors......................... 92
Resetting the power windows................... 90
Retractable power door mirrors................. 92
Roof load, max. weight ........................... 291
Rustproofing............................................ 281
S
Safety mode.............................................. 30
Seat, see Seats.......................................... 71
Seatbelt
rear seat................................................ 17
seatbelt tensioner................................. 18
Seatbelt reminder...................................... 17
Seatbelts.................................................... 16
Seats.......................................................... 71
head restraints, rear.............................. 74
heating................................................ 134
lowering the front backrest................... 71
315
09 Alphabetical Index
09
Service programme................................. 252
Steering wheel........................................... 77
keypad.................. 77, 124, 142, 165, 208
keypad, adaptive cruise control......... 169
steering wheel adjustment.................... 77
Set time interval....................................... 175
Stone chips and scratches...................... 283
Side airbags............................................... 24
Storage compartment.............................. 202
Signal input, external............................... 142
Storage spaces in the passenger compartment......................................................... 198
lowering the rear backrest.................... 73
power seats.......................................... 72
ventilated front seats.......................... 133
SIM card.................................................. 211
SIPS bags.................................................. 24
Ski hatch.................................................. 224
Soot filter................................................. 220
Soot filter full............................................ 220
Sunroof
opening and closing.............................
pinch protection....................................
sunscreen.............................................
ventilation position................................
95
96
96
95
T
Temperature
actual temperature............................. 130
Temperature control................................ 135
Testing the alarm system........................... 57
Timer........................................................ 135
Tools........................................................ 241
Total airing function........................... 51, 131
Spare wheel............................................. 241
temporary spare................................. 241
Sunscreen, sunroof.................................... 96
Spin control............................................. 162
Surround.................................................. 142
Spin control function............................... 162
Symbols................................................... 162
indicator symbols................................. 64
information symbols............................. 64
warning symbols................................... 64
Towbar, see Towing equipment.............. 226
Symbols and messages
Collision Warning with Auto Brake.....
Distance Alert.....................................
Driver Alert Control.............................
Lane Departure Warning.....................
Towing equipment................................... 226
specifications...................................... 227
Stability and traction control system....... 162
Stability system....................................... 162
Stains....................................................... 282
Start assistance....................................... 105
Steering force, speed related.................. 164
Steering force level, see Steering force... 164
Steering lock............................................ 102
316
Sun blind.................................................... 91
Symbols and messages in the Adaptive
cruise control........................................... 173
183
176
186
189
Towbar
detachable, attachment ..................... 228
detachable, removal .......................... 229
Towing..................................................... 231
towing eye.......................................... 232
Towing capacity....................................... 291
Towing eye.............................................. 232
09 Alphabetical Index
09
Trailer....................................................... 225
cable................................................... 225
driving with a trailer............................ 225
Transmission............................................ 106
Transponder.............................................. 89
Trip computer.......................................... 160
U
seatbelt reminder.................................. 65
warning................................................. 65
Unlocking
from the inside...................................... 51
from the outside................................... 51
USB, connection...................................... 145
Trip meter.................................................. 67
Warning sound
collision warning system.................... 179
Warning symbol, airbag system................ 19
Warning triangle....................................... 244
Washer fluid, filling................................... 267
Type approval, remote control key system........................................................... 303
V
Type designation..................................... 288
Vanity mirror...................................... 82, 200
Tyres
direction of rotation............................
driving characteristics.........................
maintenance.......................................
pressure..............................................
puncture repair...................................
specifications......................................
speed ratings......................................
tread wear indicators..........................
winter tyres.........................................
Ventilation................................................ 132
Washers
washer fluid, filling.............................. 267
windscreen........................................... 88
Vibration damper..................................... 226
Water and dirt-repellent coating................ 89
236
236
236
243
245
238
239
237
238
Washer nozzles, heated............................. 88
Water-repellent surface, cleaning............ 281
Waxing..................................................... 281
W
Warning lamp
adaptive cruise control....................... 167
collision warning system.................... 179
stability and traction control system. . 162
Warning lamps
airbags SRS..........................................
alternator not charging.........................
fault in brake system............................
low oil pressure.....................................
parking brake applied...........................
65
65
65
65
65
Weights
kerb weight......................................... 291
Wheels
changing.............................................
installation...........................................
rims.....................................................
snow chains........................................
spare wheel........................................
240
241
237
238
241
Wheels and tyres..................................... 236
Whiplash injury, WHIPS............................. 27
317
09 Alphabetical Index
09
WHIPS
child seat/booster cushion................... 27
whiplash injury...................................... 27
Windows, rearview and door mirrors......... 89
Windscreen washing.................................. 88
Windscreen wipers.................................... 87
rain sensor............................................ 87
Winter driving........................................... 215
Winter tyres.............................................. 238
Wiper blades............................................
changing.............................................
cleaning..............................................
service position...................................
266
266
266
266
Wipers and washing.................................. 87
318
Kdakd8Vg8dgedgVi^dcIE&'**,:c\a^h] Int. !6I&%)+!Eg^ciZY^cHlZYZc!<ŽiZWdg\'%&%!8deng^\]i©'%%%"'%&%Kdakd8Vg8dgedgVi^dc
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement