FINOLEX - eNarayan
FINOLEX – Flame Retardant (FR) PVC Insulated Industrial Cables
Also
available
180 mts (double coil)
&
270 Mts (triple coil)
Special Project
Packaging
THE FINOLEX GROUP
The Finolex Group is one of India’s leading industrial groups and has interests spanning over several areas such as power, telecommunications, petrochemicals,
agriculture and education. Finolex Cables Limited, an IS/ISO 9001 company, is the flagship company of Finolex Group. The company manufactures a wide range of
cables required for construction, automotive, agricultural, communications, industrial and power sectors at its plants in Pimpri (Pune) Urse (Near Pune), Verna (Goa),
and Roorkee (Uttrakhand).
FINOLEX –
Flame Retardant (FR) PVC Insulated Industrial Cables
To add to the existing range of electrical wires, Finolex introduces ‘Finolex’ - Flame retardant (FR)
Fr Properties
PVC insulated industrial cables, which offer added safety.
Each wire is manufactured using 99.97% pure, electrolytic grade, bright annealed bare copper Test
Specification
Test Method
with more than 100% conductivity for conductor. This copper is manufactured at the company’s
Values
Specified
state-of-the-art plant in Goa. Highest purity and conductivity of copper ensures greater saving Critical Oxygen
IS:10810 Part 58 Oxygen Index
Minimum 29 %
of electrical energy and thus helps to reduce electricity bills. The conductor is made of multiple Index
strands of finely drawn copper wires thereby offering greater flexibility which makes these wires Temperature Index IS:10810 Part 64 Minimum Temperature
Index 2500C
ideal for conduit wiring.
The wires are insulated with FR (Flame Retardent) PVC compound, specially formulated and Also meet requirements of Flammability Test as per IS 694:90
manufactured in-house. A special grade PVC resin manufactured by the group company, Finolex
Industries Limited, is used to manufacture this compound. This PVC compound has FR properties of high oxygen and temperature index. These properties help in
restricting the spread of fire even at very high temperatures. This special compound also offers high insulation resistance and dielectric strength. Insulation is applied
over the conductor by the process of dual extrusion using state-of-the-art extrusion lines. The outer skin determines the colour identification while the inner layer is pure
insulation which provides extra protection. All wires are subjected to high voltage spark testing to make sure that there are no weak spots in the insulation.
These ISI marked wires meet the requirements of IS 694 : 1990 with latest amendments with improved fire performance for category C-1. This means extra protection
against electrical shocks, short circuits and fires. The wires also have FIA/TAC (Fire Insurance/Tariff Advisory Committee) approval.
Buy only from authorised Finolex outlets to be assured of total quality. If doubt arises about the authenticity of the purchase, please write to the company at the address
given below. Send a copy of the cash memo, coil number and a metre-length sample of the cable to enable genuineness tests to be carried out in the laboratory.
These wires are manufactured in our state-of-the-art manufacturing plants at Pimpri (Pune), Urse (Near Pune), Verna (Goa) & Roorkee (Uttarakhand).
The brand Finolex, company name and logo, size of wire, voltage grade FR Type, ISI mark, licence no. are printed at regular intervals on the wire
to help in easy identification as shown below.
F I N O L E X - S I N G L E C O R E , U N S H E AT H E D W I R E S I N V O LTA G E G R A D E 1 1 0 0 V.
All information given herein is in good faith. Finolex shall not be liable for any damages arising out of incorrect use or interpretation.
The Company reserves the right to change any of the above specifications without any prior notice.
Sample card available on request
DEC 09
For technical literature please contact our Branch Offices:
| Ahmedabad : Tel: 079-26584637, 26575639 Fax: 26575743 | Bangalore :
Tel: 080-25320176 Fax: 25588544 | Bhubaneshwar : Tel: 0674-3255921 |
Chennai : Tel: 044-28230341, 28269322 Fax:28265768 | Chandigarh : Tel:
0172-5014396, 2637334 | Coimbatore : Tel: 0422-2233939 Fax: 2233940
| Goa : Tel: 0832-2782003, 2782065 Fax : 2783909 | Guwahati : Tel: 03612417628, 2410955 | Indore : Tel: 0731-2802646, 4065593 Fax: 4021263 | Jaipur : Tel : 0141-2211526, 2211529 Fax : 2214324 | Kochi : Tel: 0484-240492,
2408390 Fax: 2539107 | Kolkata : Tel: 033-24192494, 24192495 Fax: 22871051
| Lucknow : Tel: 0522-2464368 | Mumbai : Tel: 022-22882095, 22820062 Fax:
22852168 | New Delhi : Tel: 011-22319744, 23324748 Fax:23715642 | Pune
: Tel: 020-27475963, 27506200 | Raipur : Tel: 0771-2885595 Fax: 2525800
| Secunderabad : Tel: 040-27721224, 27811161 Fax: 27811161
FINOLEX 25 PAIR CAT-5 LAN CABLES – INDOOR AND AERIAL
The 25 pair Cat-5 LAN cable for indoor application consists of a solid bare annealed copper conductor of 24 AWG (0.5 mm), insulated
with High Density Polyethylene compound, colour coded, paired as per colour combinations given in the table. Twenty-five such pairs
are twisted together to form a laid up cable, a nylon binder is applied helically. The cable is jacketed with a speical FR PVC compound
formulated and manufactured in-house which has high Oxygen and Temperature Index. The colour of the jacket is grey. The cable is
ideal for use in vertical backbone structured cabling.
In case of aerial cable, a polyester tape is applied round the 25 pairs, along with a poly laminated aluminium tape applied with an
overlap. It is then jacketed along with a stranded
galvanized steel wire strength member with a black
coloured polyethylene compound. The cable
construction forms the ‘Figure 8’ when seen in a
cross section. The cable is most suited for outdoor
installations.
The above cables are ideal for voice as well as data
transmission and are suitable for broadband
application. These cables generally conform to
TIA/EIA-568 B.2 specification.
FINOLEX CABLES LIMITED
Finolex Cables Limited, the flagship company of the Finolex Group, today, is India’s leading manufacturer of
electrical and telecommunication cables. It manufactures a wide range of wires and cables for diverse
application areas. The company has, over the years, established its reputation as an innovative leader and
quality manufacturer by continuously upgrading technology, modernizing manufacturing facilities and
maintaining the highest standards in quality and service.
The company has expanded from its first plant at Pimpri in Pune to a plant at Urse and a new plant at Goa. All
the plants are accredited with IS/ISO 9001. In addition the plant at Urse and Goa have been recently awarded
IS/ISO 14001 certification.
Finolex Cables takes pride in being the only company in India that is able to offer 'Total Cable Solutions'. The
Stringent quality control at every stage from raw
material through manufacturing upto the finished
product guarantees high quality and long life under
extreme operating conditions. These are available
in wooden reels of 305 mtrs. length.
product portfolio includes PVC electrical cables, Flexible cables for industry, cables for the agricultural and
Salient Features :
The backward integration of the group into manufacturing PVC Resin at Finolex Industries, Ratnagiri and
l Low Attenuation
l Low Crosstalk
Finolex
automobile sectors and LT Power & Control cables. Its communication cable range includes Jelly Filled
Telephone cables, Co-axial Trunk, Branch & Drop cables for Cable Television, Lan cables and Copper and
CAT 5E LAN CABLE
Fiber Components from Leviton of U.S.A. for structured cabling.
99.97% electrolytic grade Continuous Cast Copper rods at its plants in Goa puts Finolex Cables in a unique
l Low Return Loss
position of having total control on the quality of its products.
INDOOR CABLE
The copper and PVC meet the highest standards of purity. This forms the core of every quality cable
manufactured by Finolex.
Nylon Rip Cord
CAT 5E+ LAN CABLE
FR PVC Jacket
25
years
Y
NT
IF
E
I
and Components. Optinet is designed to provide a no-risk
AERIAL CABLE
OLEX
TE M
CERT
cabling solution featuring a complete range of Finolex Cables
FIN
D
A
W ARR
YS
Finolex Cables Ltd. brings you Optinet, a high-quality, end to end
S
OPTINET STRUCTURED CABLING SYSTEMS
Pair (25 Nos.)
G
C ABLI N
cabling system with ample headroom that not only meets but
Steel Wires
Strength Member
CAT 6 LAN CABLE
exceeds industry requirements. Optinet seamlessly merges every
aspect of your complete cabling system from connectors to cable
to wallplates to patch panels and accessories. The Optinet
Web
Cabling System is distinguished by quality design and
manufacturing. Finolex offers a variety of services that enhance
Aluminium Tape
the value of the system, including consultancy, site
evaluation, network planning, training, site audits and
a 25-year Performance Warranty. All combining to make
Optinet the finest Structured Cabling System available in India.
CAT 6+ LAN CABLE
Net
STRUCTURED CABLING SYSTEMS
Connections you can rely on
Bandwidth and Speed
in the Ultimate
Lan Cabling Solutions
Polyethylene Jacket
Net
Polyester Tape
Pair (25 Nos.)
All information given herein is in good faith. Finolex shall not be liable for any damages arising out of incorrect use or interpretation.
The Company reserves the right to change any of the above specifications without any prior notice.
STRUCTURED CABLING SYSTEMS
Connections you can rely on
CATEGORY 5 ENHANCED UNSHIELDED TWISTED PAIR (UTP) LAN CABLE
Description
: 4 Pair Unshielded Twisted Pair (UTP) Category 5
Enhanced LAN Cable
Insulation
: High Density Polyethylene
Description
Core Colour
: Pair 1 : White - Blue
Pair 2 : White - Orange
Pair 3 : White - Green
Pair 4 : White - Brown
Part Number : 32205048
Part Number : 32105048
Standard
Length
: 305 Meters (1000 Feet)
Packaging
Sheath
: Tangle free cable pack in laminated corrugated box
and UL listing & verification status label
Application :
This Category 5 E, four pair cable is a highspeed, high performance, 100 ohm
impedance cable capable of carrying high
bit-rate signaling for extended distances in
horizontal cabling. Signal amplifiers are not
required for a length of 328 feet (100 M).
Applications can include Voice, ISDN, ATM
155 Mbps, ATM 622 Mbps 100 Mbps TPDDI,
Fast and Giga Ethernet, 100 Mbps TP-PMD,
1000 BASE-T
CATEGORY 6 UNSHIELDED TWISTED PAIR (UTP) (300 MHz)* LAN CABLE
Standard
Length
: Fire Retardant PVC Compound
(FRPVC)
Approx. Cable OD
: 5.5 mm
Sheath Colour
: Grey
Listed & Verified
Operating Environment : Indoor
Electrical Performance : (At 100MHz)
Flame Rating
Standards
: TIA/EIA 568 B.2, UL Listed &
verified for CAT 5 E
Impedance
: 100 +/- 15 ohm
(NVP) Velocity of
Propagation
: 65% min @ 100 MHz
: 60 deg. C As per UL 1581 CMX
Comparative Performance : Advantage Finolex
Frequency
(MHz)
Attenuation
Max. dB/100
[email protected]
20 deg. C
Return
loss
(dB) Min
NEXT
(dB) Min
PS NEXT
(dB) Min
PS ELFEXT
(dB) Min
ACR
(dB) Min
1.94
20.00
35.42 65.00 79.56
62.00 76.00 60.80 64.23
63.50 77.98
6.47
6.26
25.00
36.18 50.00 62.46
47.00 61.72 40.80 55.55
44.50 56.46
8.25
8.01
25.00
35.94 47.00 61.72
44.00 56.79 36.70 52.81
39.80 54.43
1
2.04
10
16
Delay Skew
: 45 ns /100 mtrs.
@ 20 deg. C max.
20
9.27
8.99
25.00
37.34 46.00 61.38
43.00 58.54 34.70 49.13
37.50 52.46
Propagation Delay : 538 ns / 100 mtrs.
@ 100 MHz
@ 20 deg. C max.
31.25
11.72
11.38
23.64
36.08 43.00 55.93
40.00 52.79 30.90 47.65
32.30 44.62
DC Resistance
Physical Specification :
62.5
16.99
16.34
21.54
33.89 38.00 49.85
35.00 47.46 24.80 43.84
23.10 34.22
Conductor : 24 AWG
100
21.98
20.69
20.11
31.14 35.00 47.72
32.00 46.48 20.80 41.72
15.50 30.74
Annealed bare solid copper
CAT 5 E Specification
Mutual
Capacitance
: 9.38 ohm / 100 mtrs.
@ 20 deg. C max.
: 5.60 nf / 100 mtrs. max.
Typical Cable Performance
Packaging
: Tangle free cable pack in
laminated box with UL Listing &
Verification lable
Description
Part Number
: 32115048
Sheath
Standard Length
: 305 Meters (1000 Feet)
: Fire Retardant PVC Compound
(FRPVC)
Standard
Length
Packaging
: Tangle free cable pack in
laminated corrugated box
and UL listing & verification
status label
: 4 Pair UTP Category 6+ LAN
Cable with Star Seperator
: Indoor
: 60 deg. C As per UL 1581 CMX
Electrical Performance : (At 250 MHz)
Standards
: TIA/EIA 568 B.2,
Extended to 200 MHz
Impedance
: 100 +/- 15 ohm
(NVP) Velocity of
Propagation
: 65% min.
Delay Skew
: 45 ns /100 mtrs.
@ 20 deg. C max.
Propagation
Delay
: 537 ns / 100 mtrs.
@ 200 MHz @ 20 deg. C max.
Physical Specification :
DC Resistance
Conductor : 24 AWG Annealed bare solid copper
: 9.38 ohm / 100 mtrs.
@ 20 deg. C max.
Mutual
Capacitance
: 5.60 nF / 100 mtrs. max.
Operating
Environment
Listed & Verified
Comparative Performance : Advantage Finolex
Frequency
(MHz)
1.00
10.00
16.00
20.00
31.25
62.50
100.00
120.00
140.00
149.10
155.50
180.00
200.00
Attenuation
Max.
dB/100 M
@20 deg. C
2.04
6.50
8.20
9.30
11.70
17.00
22.00
24.30
26.50
27.50
28.10
30.50
32.40
1.92
6.19
7.89
8.85
11.17
16.08
20.67
22.81
24.81
25.67
26.27
28.47
30.17
Return
loss (dB)
Min
20.00
25.00
25.00
25.00
23.64
21.54
20.11
19.55
19.08
18.89
18.77
18.32
18.00
44.60
43.86
38.12
37.54
36.89
35.25
40.28
33.22
31.62
35.22
33.30
32.12
31.20
: Indoor
Electrical Performance : (At 300 MHz)
Standards
: TIA / EIA 568 B.2-1
Impedance
: 100 +/- 15 ohm
Velocity
of Propagation : 62.10% min. @ 250 MHz
Propagation
Delay
: 536 ns / 100 mtrs. max. @ 20 deg. C
@ 250 Mhz
Delay Skew
: 45 ns /100 mtrs. max. @ 20 deg. C
for 1 MHz~250 MHz
Mutual
Capacitance
Listed & Verified
Comparative Performance : Advantage Finolex
Sheath Colour : Yellow
Core Colour
Part Number : 32405048
: 305 Meters (1000 Feet)
Approx. Cable OD : 5.5 mm
Flame Rating
: 6.5 mm
Frequency
(Mhz)
1.00
4.00
8.00
10.00
16.00
20.00
25.00
31.25
62.50
100.00
110.00
120.00
140.00
155.00
175.00
200.00
210.00
220.00
230.00
240.00
250.00
300.00
Attenuation
(MAX)
at 20 Deg. C
dB/100 M
Spec. Typical
2.03 1.98
3.78 3.70
5.32 5.20
5.95 5.82
7.55 7.38
8.47 8.28
9.51 9.29
10.67 10.43
15.38 15.04
19.80 19.37
20.85 20.40
21.86 21.40
23.79 23.28
25.16 24.63
26.91 26.34
28.98 28.38
29.78 29.16
30.57 29.94
31.34 30.69
32.10 31.44
32.85 32.17
36.43 35.69
NEXT
(MIN)
(dB)
Spec.
74.30
65.27
60.75
59.30
56.24
54.78
53.33
51.88
47.36
44.30
43.68
43.11
42.11
41.45
40.65
39.78
39.47
39.16
38.87
38.60
38.33
37.14
CAT 6 Specification
: 5.60 nF / 100 mtrs. max.
Typical
76.81
67.78
63.27
61.81
58.75
57.30
55.85
54.39
49.88
46.81
46.19
45.63
44.62
43.96
43.17
42.30
41.98
41.68
41.39
41.11
40.85
39.66
PS NEXT
(MIN)
(dB)
Spec.
72.30
63.27
58.75
57.30
54.24
52.78
51.33
49.88
45.36
42.30
41.68
41.11
40.11
39.45
38.65
37.78
37.47
37.16
36.87
36.60
36.33
35.14
Typical
75.54
66.51
62.00
60.54
57.48
56.03
54.58
53.12
48.61
45.54
44.92
44.36
43.35
42.69
41.90
41.03
40.71
40.41
40.12
39.84
39.58
38.39
ACR NEXT
(MIN)
(dB)
Spec.
72.28
61.49
55.43
53.35
48.68
46.31
43.83
41.20
31.98
24.50
22.83
21.25
18.32
16.28
13.75
10.80
9.68
8.59
7.53
6.49
5.48
0.72
Typical
74.79
64.00
57.95
55.86
51.20
48.83
46.34
43.72
34.49
27.01
25.34
23.76
20.83
18.80
16.26
13.32
12.20
11.11
10.05
9.01
8.00
3.23
ACR PSNEXT
(MIN)
(dB)
Spec.
70.28
59.49
53.43
51.35
46.68
44.31
41.83
39.20
29.98
22.50
20.83
19.25
16.32
14.28
11.75
8.80
7.68
6.59
5.53
4.49
3.48
-
Typical
73.56
62.81
56.80
54.73
50.10
47.75
45.28
42.69
33.56
26.17
24.52
22.96
20.07
18.06
15.56
12.65
11.55
10.47
9.42
8.40
7.40
2.70
ELFEXT
(MIN)
(dB/100 M)
Spec.
67.80
55.76
49.74
47.80
43.72
41.78
39.84
37.90
31.88
27.80
26.97
26.22
24.88
23.99
22.94
21.78
21.36
20.95
20.57
20.20
19.84
18.26
Typical
70.75
58.71
52.69
50.75
46.67
44.73
42.79
40.86
34.83
30.75
29.92
29.17
27.83
26.95
25.89
24.73
24.31
23.90
23.52
23.15
22.79
21.21
PS ELFEXT
(MIN)
(dB/100 M)
Spec.
64.80
52.76
46.74
44.80
40.72
38.78
36.84
34.90
28.88
24.80
23.97
23.22
21.88
20.99
19.94
18.78
18.36
17.95
17.57
17.20
16.84
15.26
RETURN LOSS
(MIN)
(dB)
Typical
67.75
55.71
49.69
47.75
43.67
41.73
39.79
37.86
31.83
27.75
26.92
26.17
24.83
23.95
22.89
21.73
21.31
20.90
20.52
20.15
19.79
18.21
Spec.
20.00
23.01
24.52
25.00
25.00
25.00
24.17
23.33
20.74
18.99
18.63
18.31
17.73
17.35
16.90
16.40
16.22
16.04
15.88
15.72
15.57
14.89
Typical
42.27
38.05
35.95
35.27
33.84
33.16
32.48
31.80
29.70
28.27
27.98
27.71
27.24
26.93
26.57
26.16
26.01
25.87
25.74
25.61
25.48
21.93
Typical Cable Performance
*Performance specification extended
to frequencies upto 300 MHz
CATEGORY 6+ UNSHIELDED TWISTED PAIR (UTP) (600 Mhz)* LAN CABLE
: Pair 1 : White - Blue
Pair 2 : White - Orange
Pair 3 : White - Green
Pair 4 : White - Brown
Operating
Environment
: Fire Retardant PVC Compound (FRPVC)
Approx.
Cable OD
DC Resistance : 9.38 ohm / 100 mtrs. max.
@ 20 deg. C
Core Colour
: Blue
Sheath
Physical Specification :
Conductor : 23 AWG Annealed bare solid copper
Insulation : High Density Polyethylene
: 4 Pair Unshielded Twisted
Pair (UTP) Category 5E+
LAN Cable
Sheath Colour
: Pair 1 : White - Blue
Pair 2 : White - Orange
Pair 3 : White - Green
Pair 4 : White - Brown
Flame Rating : 75 deg.C As per Vertical Tray Flame
Test as per UL 1685. CM rating
Description
Insulation : High Density Polyethylene
: 305 Meters (1000 Feet)
Core Colour
Application :
This Category 6, four pair cable is a high-speed,
high performance, 100 ohm impedance cable
capable of carrying high bit-rate signaling for
extended distances in horizontal cabling. Signal
amplifiers are not required for a length of 328 feet
(100 M). Applications can include Voice, ISDN, ATM
155 Mbps, ATM 622 Mbps 100 Mbps TPDDI, Fast
and Giga Ethernet, and IEEE 802.3/5/12, 100 BASE
VG (100 BASE NE), 100 BASE-T, 100 Mbps TP-PMD,
1000 BASE-T, 10Gb and any other future
applications designed for Category 6 Cables.
CATEGORY 5E+ UNSHIELDED TWISTED PAIR (UTP) (200 Mhz) LAN CABLE
Application
:
This Category 5E +, four pair cable is a high-speed,
high performance, 100 ohm impedance cable
capable of carrying high bit-rate signaling for
extended distances in horizontal cabling. Signal
amplifiers are not required for a length of 328 feet
(100 M). Applications can include Voice, ISDN, ATM
155 Mbps, ATM 622 Mbps, 100Mbps TPDDI, Fast
and Giga Ethernet, and IEEE 802.3/5/12, 100 BASE
VG (100 BASE NE), 100 BASE-T Mbps TP-PMD,
1000 Base-T, Higher Headroom, Higher Bandwidth,
Higher Speed.
: 4 Pair Unshielded Twisted Pair
(UTP) Category 6 LAN Cable
NEXT
(dB) Min
65.31
50.31
47.25
45.80
42.89
38.38
35.31
34.10
33.10
32.70
32.40
31.50
30.80
85.66
75.54
74.16
68.72
64.56
63.34
54.77
53.26
52.68
51.55
50.80
47.51
46.63
PS NEXT
(dB) Min
62.31
47.31
44.25
42.80
39.89
35.38
32.31
31.10
30.10
29.70
29.40
28.50
27.80
76.60
62.39
60.59
59.92
57.73
52.87
48.49
46.62
45.78
43.15
42.98
40.68
40.08
ELFEXT
(dB) Min
63.75
43.75
39.67
37.73
33.86
27.83
23.75
22.20
20.80
20.30
19.90
18.60
17.70
CAT 5 E+ Specification
Typical Cable Performance of CAT 5 E+ (200 MHz Giga lan cable)
73.46
58.61
57.48
52.43
48.79
45.09
43.65
42.85
42.64
42.08
41.66
39.92
39.85
PS
ELFEXT
(dB) Min
60.75
40.75
36.67
34.73
30.86
24.83
20.75
19.20
17.80
17.30
16.90
15.60
14.70
71.30
57.93
56.81
50.38
47.99
44.28
42.76
41.69
41.56
41.06
40.96
38.76
38.12
ACR/NEXT
(dB) Min
63.51
44.51
40.75
37.60
32.49
26.68
18.31
12.20
9.30
8.00
7.10
4.00
1.60
85.17
69.36
65.86
62.52
54.43
49.26
36.62
34.82
32.30
27.86
26.52
24.56
23.77
Packaging
: Tangle free cable pack in
laminated box with UL Listing &
Verification Label
Application :
This Category 6+, four pair cable is a high-speed,
high performance, 100 ohm impedance cable
capable of carrying high bit-rate signaling for
extended distances in horizontal cabling. Signal
amplifiers are not required for a length of 328 feet
(100 M). Applications can include Voice, ISDN, ATM
155 Mbps, ATM 622 Mbps 100 Mbps TPDDI, Fast
and Giga Ethernet, and IEEE 802.3/5/12, 100 BASE
VG (100 BASE NE), 100 BASE-T, 100 Mbps TP-PMD,
1000 BASE-T, 10Gb and any other future
applications designed for Category 6 Cables.
Physical Specification :
Conductor : 23 AWG Annealed bare solid copper
Insulation : High Density Polyethylene
Sheath
Separator
Approx.
Cable OD
Sheath Colour
Operating
Environment
Flame Rating
: Pair 1 : White - Blue
Pair 2 : White - Orange
Pair 3 : White - Green
Pair 4 : White - Brown
: Fire Retardant PVC Compound
: Star shaped
: 6.8 mm Max.
: Green
: Indoor
: 75 deg.C As per Vertical Tray Flame
Test as per UL 1685. CM rating.
Electrical Performance : (At 600 MHz)
Standards
: TIA / EIA 568 B.2-1
Impedance
: 100 +/- 15 ohm
Velocity
of Propagation : 62.10% min. @ 250 MHz
Propagation : 536 ns / 100 mtrs. max. @ 20 deg.C
Delay
@ 250 Mhz
Delay Skew
: 45 ns /100 mtrs. max. @ 20 deg. C
for 1 MHz~250 MHz
DC Resistance : 9.38 ohm / 100 mtrs. max.
@ 20 deg. C
Mutual
Capacitance : 5.60 nF / 100 mtrs. max. at 1000 Hz
Comparative Performance : Advantage Finolex
Frequency
(Mhz)
1.00
4.00
8.00
10.00
16.00
20.00
25.00
31.25
62.50
100.00
110.00
120.00
140.00
155.00
175.00
200.00
210.00
220.00
230.00
240.00
250.00
300.00
350.00
400.00
450.00
500.00
550.00
600.00
Attenuation
(MAX)
at 20 Deg. C
dB/100 M
Spec. Typical
2.03 1.98
3.78 3.70
5.32 5.20
5.95 5.82
7.55 7.38
8.47 8.28
9.51 9.29
10.67 10.43
15.38 15.04
19.80 19.37
20.85 20.40
21.86 21.40
23.79 23.28
25.16 24.63
26.91 26.34
28.98 28.38
29.78 29.16
30.57 29.94
31.34 30.69
32.10 31.44
32.85 32.17
36.43 35.69
39.79 38.98
42.97 42.11
46.01 45.10
48.94 47.98
51.76 50.76
54.49 53.45
CAT 6 Specification
NEXT
(MIN)
(dB)
Spec.
74.30
65.27
60.75
59.30
56.24
54.78
53.33
51.88
47.36
44.30
43.68
43.11
42.11
41.45
40.65
39.78
39.47
39.16
38.87
38.60
38.33
37.14
36.14
35.27
34.50
33.82
33.19
32.63
Typical
80.08
71.05
66.54
65.08
62.02
60.57
59.12
57.66
53.15
50.08
49.46
48.90
47.89
47.23
46.44
45.57
45.25
44.95
44.66
44.38
44.12
42.93
41.92
41.05
40.29
39.60
38.98
38.41
PS NEXT
(MIN)
(dB)
Spec.
72.30
63.27
58.75
57.30
54.24
52.78
51.33
49.88
45.36
42.30
41.68
41.11
40.11
39.45
38.65
37.78
37.47
37.16
36.87
36.60
36.33
35.14
34.14
33.27
32.50
31.82
31.19
30.63
Typical
77.88
68.85
64.34
62.88
59.82
58.37
56.92
55.46
50.95
47.88
47.26
46.70
45.69
45.03
44.24
43.37
43.05
42.75
42.46
42.18
41.92
40.73
39.72
38.85
38.09
37.40
36.78
36.21
ACR NEXT
(MIN)
(dB)
Spec.
72.28
61.49
55.43
53.35
48.68
46.31
43.83
41.20
31.98
24.50
22.83
21.25
18.32
16.28
13.75
10.80
9.68
8.59
7.53
6.49
5.48
0.72
-
Typical
78.06
67.27
61.22
59.13
54.47
52.10
49.61
46.99
37.76
30.28
28.61
27.03
24.10
22.07
19.53
16.59
15.47
14.38
13.32
12.28
11.27
6.50
2.14
-
Listed & Verified
ACR PSNEXT
(MIN)
(dB)
Spec.
70.28
59.49
53.43
51.35
46.68
44.31
41.83
39.20
29.98
22.50
20.83
19.25
16.32
14.28
11.75
8.80
7.68
6.59
5.53
4.49
3.48
-
Typical
75.90
65.15
59.14
57.07
52.44
50.09
47.62
45.03
35.90
28.51
26.86
25.30
22.41
20.40
17.90
14.99
13.89
12.81
11.76
10.74
9.74
5.04
0.74
-
ELFEXT
(MIN)
(dB/100 M)
Spec.
67.80
55.76
49.74
47.80
43.72
41.78
39.84
37.90
31.88
27.80
26.97
26.22
24.88
23.99
22.94
21.78
21.36
20.95
20.57
20.20
19.84
18.26
16.92
15.76
14.74
13.82
12.99
12.24
Typical
70.75
58.71
52.69
50.75
46.67
44.73
42.79
40.86
34.83
30.75
29.92
29.17
27.83
26.95
25.89
24.73
24.31
23.90
23.52
23.15
22.79
21.21
19.87
18.71
17.69
16.77
15.95
15.19
PS ELFEXT
(MIN)
(dB/100 M)
Spec.
64.80
52.76
46.74
44.80
40.72
38.78
36.84
34.90
28.88
24.80
23.97
23.22
21.88
20.99
19.94
18.78
18.36
17.95
17.57
17.20
16.84
15.26
13.92
12.76
11.74
10.82
9.99
9.24
Typical
67.75
55.71
49.69
47.75
43.67
41.73
39.79
37.86
31.83
27.75
26.92
26.17
24.83
23.95
22.89
21.73
21.31
20.90
20.52
20.15
19.79
18.21
16.87
15.71
14.69
13.77
12.95
12.19
Typical Cable Performance
*Performance specification extended to frequencies upto 600 MHz
RETURN LOSS
(MIN)
(dB)
Spec.
20.00
23.01
24.52
25.00
25.00
25.00
24.17
23.33
20.74
18.99
18.63
18.31
17.73
17.35
16.90
16.40
16.22
16.04
15.88
15.72
15.57
14.89
32.72
33.01
33.27
33.49
26.00
12.30
Typical
42.27
38.05
35.95
35.27
33.84
33.16
32.48
31.80
29.70
28.27
27.98
27.71
27.24
26.93
26.57
26.16
26.01
25.87
25.74
25.61
25.48
21.93
21.46
21.05
20.69
20.37
20.08
19.82
CATEGORY 5 ENHANCED UNSHIELDED TWISTED PAIR (UTP) LAN CABLE
Description
: 4 Pair Unshielded Twisted Pair (UTP) Category 5
Enhanced LAN Cable
Insulation
: High Density Polyethylene
Description
Core Colour
: Pair 1 : White - Blue
Pair 2 : White - Orange
Pair 3 : White - Green
Pair 4 : White - Brown
Part Number : 32205048
Part Number : 32105048
Standard
Length
: 305 Meters (1000 Feet)
Packaging
Sheath
: Tangle free cable pack in laminated corrugated box
and UL listing & verification status label
Application :
This Category 5 E, four pair cable is a highspeed, high performance, 100 ohm
impedance cable capable of carrying high
bit-rate signaling for extended distances in
horizontal cabling. Signal amplifiers are not
required for a length of 328 feet (100 M).
Applications can include Voice, ISDN, ATM
155 Mbps, ATM 622 Mbps 100 Mbps TPDDI,
Fast and Giga Ethernet, 100 Mbps TP-PMD,
1000 BASE-T
CATEGORY 6 UNSHIELDED TWISTED PAIR (UTP) (300 MHz)* LAN CABLE
Standard
Length
: Fire Retardant PVC Compound
(FRPVC)
Approx. Cable OD
: 5.5 mm
Sheath Colour
: Grey
Listed & Verified
Operating Environment : Indoor
Electrical Performance : (At 100MHz)
Flame Rating
Standards
: TIA/EIA 568 B.2, UL Listed &
verified for CAT 5 E
Impedance
: 100 +/- 15 ohm
(NVP) Velocity of
Propagation
: 65% min @ 100 MHz
: 60 deg. C As per UL 1581 CMX
Comparative Performance : Advantage Finolex
Frequency
(MHz)
Attenuation
Max. dB/100
[email protected]
20 deg. C
Return
loss
(dB) Min
NEXT
(dB) Min
PS NEXT
(dB) Min
PS ELFEXT
(dB) Min
ACR
(dB) Min
1.94
20.00
35.42 65.00 79.56
62.00 76.00 60.80 64.23
63.50 77.98
6.47
6.26
25.00
36.18 50.00 62.46
47.00 61.72 40.80 55.55
44.50 56.46
8.25
8.01
25.00
35.94 47.00 61.72
44.00 56.79 36.70 52.81
39.80 54.43
1
2.04
10
16
Delay Skew
: 45 ns /100 mtrs.
@ 20 deg. C max.
20
9.27
8.99
25.00
37.34 46.00 61.38
43.00 58.54 34.70 49.13
37.50 52.46
Propagation Delay : 538 ns / 100 mtrs.
@ 100 MHz
@ 20 deg. C max.
31.25
11.72
11.38
23.64
36.08 43.00 55.93
40.00 52.79 30.90 47.65
32.30 44.62
DC Resistance
Physical Specification :
62.5
16.99
16.34
21.54
33.89 38.00 49.85
35.00 47.46 24.80 43.84
23.10 34.22
Conductor : 24 AWG
100
21.98
20.69
20.11
31.14 35.00 47.72
32.00 46.48 20.80 41.72
15.50 30.74
Annealed bare solid copper
CAT 5 E Specification
Mutual
Capacitance
: 9.38 ohm / 100 mtrs.
@ 20 deg. C max.
: 5.60 nf / 100 mtrs. max.
Typical Cable Performance
Packaging
: Tangle free cable pack in
laminated box with UL Listing &
Verification lable
Description
Part Number
: 32115048
Sheath
Standard Length
: 305 Meters (1000 Feet)
: Fire Retardant PVC Compound
(FRPVC)
Standard
Length
Packaging
: Tangle free cable pack in
laminated corrugated box
and UL listing & verification
status label
: 4 Pair UTP Category 6+ LAN
Cable with Star Seperator
: Indoor
: 60 deg. C As per UL 1581 CMX
Electrical Performance : (At 250 MHz)
Standards
: TIA/EIA 568 B.2,
Extended to 200 MHz
Impedance
: 100 +/- 15 ohm
(NVP) Velocity of
Propagation
: 65% min.
Delay Skew
: 45 ns /100 mtrs.
@ 20 deg. C max.
Propagation
Delay
: 537 ns / 100 mtrs.
@ 200 MHz @ 20 deg. C max.
Physical Specification :
DC Resistance
Conductor : 24 AWG Annealed bare solid copper
: 9.38 ohm / 100 mtrs.
@ 20 deg. C max.
Mutual
Capacitance
: 5.60 nF / 100 mtrs. max.
Operating
Environment
Listed & Verified
Comparative Performance : Advantage Finolex
Frequency
(MHz)
1.00
10.00
16.00
20.00
31.25
62.50
100.00
120.00
140.00
149.10
155.50
180.00
200.00
Attenuation
Max.
dB/100 M
@20 deg. C
2.04
6.50
8.20
9.30
11.70
17.00
22.00
24.30
26.50
27.50
28.10
30.50
32.40
1.92
6.19
7.89
8.85
11.17
16.08
20.67
22.81
24.81
25.67
26.27
28.47
30.17
Return
loss (dB)
Min
20.00
25.00
25.00
25.00
23.64
21.54
20.11
19.55
19.08
18.89
18.77
18.32
18.00
44.60
43.86
38.12
37.54
36.89
35.25
40.28
33.22
31.62
35.22
33.30
32.12
31.20
: Indoor
Electrical Performance : (At 300 MHz)
Standards
: TIA / EIA 568 B.2-1
Impedance
: 100 +/- 15 ohm
Velocity
of Propagation : 62.10% min. @ 250 MHz
Propagation
Delay
: 536 ns / 100 mtrs. max. @ 20 deg. C
@ 250 Mhz
Delay Skew
: 45 ns /100 mtrs. max. @ 20 deg. C
for 1 MHz~250 MHz
Mutual
Capacitance
Listed & Verified
Comparative Performance : Advantage Finolex
Sheath Colour : Yellow
Core Colour
Part Number : 32405048
: 305 Meters (1000 Feet)
Approx. Cable OD : 5.5 mm
Flame Rating
: 6.5 mm
Frequency
(Mhz)
1.00
4.00
8.00
10.00
16.00
20.00
25.00
31.25
62.50
100.00
110.00
120.00
140.00
155.00
175.00
200.00
210.00
220.00
230.00
240.00
250.00
300.00
Attenuation
(MAX)
at 20 Deg. C
dB/100 M
Spec. Typical
2.03 1.98
3.78 3.70
5.32 5.20
5.95 5.82
7.55 7.38
8.47 8.28
9.51 9.29
10.67 10.43
15.38 15.04
19.80 19.37
20.85 20.40
21.86 21.40
23.79 23.28
25.16 24.63
26.91 26.34
28.98 28.38
29.78 29.16
30.57 29.94
31.34 30.69
32.10 31.44
32.85 32.17
36.43 35.69
NEXT
(MIN)
(dB)
Spec.
74.30
65.27
60.75
59.30
56.24
54.78
53.33
51.88
47.36
44.30
43.68
43.11
42.11
41.45
40.65
39.78
39.47
39.16
38.87
38.60
38.33
37.14
CAT 6 Specification
: 5.60 nF / 100 mtrs. max.
Typical
76.81
67.78
63.27
61.81
58.75
57.30
55.85
54.39
49.88
46.81
46.19
45.63
44.62
43.96
43.17
42.30
41.98
41.68
41.39
41.11
40.85
39.66
PS NEXT
(MIN)
(dB)
Spec.
72.30
63.27
58.75
57.30
54.24
52.78
51.33
49.88
45.36
42.30
41.68
41.11
40.11
39.45
38.65
37.78
37.47
37.16
36.87
36.60
36.33
35.14
Typical
75.54
66.51
62.00
60.54
57.48
56.03
54.58
53.12
48.61
45.54
44.92
44.36
43.35
42.69
41.90
41.03
40.71
40.41
40.12
39.84
39.58
38.39
ACR NEXT
(MIN)
(dB)
Spec.
72.28
61.49
55.43
53.35
48.68
46.31
43.83
41.20
31.98
24.50
22.83
21.25
18.32
16.28
13.75
10.80
9.68
8.59
7.53
6.49
5.48
0.72
Typical
74.79
64.00
57.95
55.86
51.20
48.83
46.34
43.72
34.49
27.01
25.34
23.76
20.83
18.80
16.26
13.32
12.20
11.11
10.05
9.01
8.00
3.23
ACR PSNEXT
(MIN)
(dB)
Spec.
70.28
59.49
53.43
51.35
46.68
44.31
41.83
39.20
29.98
22.50
20.83
19.25
16.32
14.28
11.75
8.80
7.68
6.59
5.53
4.49
3.48
-
Typical
73.56
62.81
56.80
54.73
50.10
47.75
45.28
42.69
33.56
26.17
24.52
22.96
20.07
18.06
15.56
12.65
11.55
10.47
9.42
8.40
7.40
2.70
ELFEXT
(MIN)
(dB/100 M)
Spec.
67.80
55.76
49.74
47.80
43.72
41.78
39.84
37.90
31.88
27.80
26.97
26.22
24.88
23.99
22.94
21.78
21.36
20.95
20.57
20.20
19.84
18.26
Typical
70.75
58.71
52.69
50.75
46.67
44.73
42.79
40.86
34.83
30.75
29.92
29.17
27.83
26.95
25.89
24.73
24.31
23.90
23.52
23.15
22.79
21.21
PS ELFEXT
(MIN)
(dB/100 M)
Spec.
64.80
52.76
46.74
44.80
40.72
38.78
36.84
34.90
28.88
24.80
23.97
23.22
21.88
20.99
19.94
18.78
18.36
17.95
17.57
17.20
16.84
15.26
RETURN LOSS
(MIN)
(dB)
Typical
67.75
55.71
49.69
47.75
43.67
41.73
39.79
37.86
31.83
27.75
26.92
26.17
24.83
23.95
22.89
21.73
21.31
20.90
20.52
20.15
19.79
18.21
Spec.
20.00
23.01
24.52
25.00
25.00
25.00
24.17
23.33
20.74
18.99
18.63
18.31
17.73
17.35
16.90
16.40
16.22
16.04
15.88
15.72
15.57
14.89
Typical
42.27
38.05
35.95
35.27
33.84
33.16
32.48
31.80
29.70
28.27
27.98
27.71
27.24
26.93
26.57
26.16
26.01
25.87
25.74
25.61
25.48
21.93
Typical Cable Performance
*Performance specification extended
to frequencies upto 300 MHz
CATEGORY 6+ UNSHIELDED TWISTED PAIR (UTP) (600 Mhz)* LAN CABLE
: Pair 1 : White - Blue
Pair 2 : White - Orange
Pair 3 : White - Green
Pair 4 : White - Brown
Operating
Environment
: Fire Retardant PVC Compound (FRPVC)
Approx.
Cable OD
DC Resistance : 9.38 ohm / 100 mtrs. max.
@ 20 deg. C
Core Colour
: Blue
Sheath
Physical Specification :
Conductor : 23 AWG Annealed bare solid copper
Insulation : High Density Polyethylene
: 4 Pair Unshielded Twisted
Pair (UTP) Category 5E+
LAN Cable
Sheath Colour
: Pair 1 : White - Blue
Pair 2 : White - Orange
Pair 3 : White - Green
Pair 4 : White - Brown
Flame Rating : 75 deg.C As per Vertical Tray Flame
Test as per UL 1685. CM rating
Description
Insulation : High Density Polyethylene
: 305 Meters (1000 Feet)
Core Colour
Application :
This Category 6, four pair cable is a high-speed,
high performance, 100 ohm impedance cable
capable of carrying high bit-rate signaling for
extended distances in horizontal cabling. Signal
amplifiers are not required for a length of 328 feet
(100 M). Applications can include Voice, ISDN, ATM
155 Mbps, ATM 622 Mbps 100 Mbps TPDDI, Fast
and Giga Ethernet, and IEEE 802.3/5/12, 100 BASE
VG (100 BASE NE), 100 BASE-T, 100 Mbps TP-PMD,
1000 BASE-T, 10Gb and any other future
applications designed for Category 6 Cables.
CATEGORY 5E+ UNSHIELDED TWISTED PAIR (UTP) (200 Mhz) LAN CABLE
Application
:
This Category 5E +, four pair cable is a high-speed,
high performance, 100 ohm impedance cable
capable of carrying high bit-rate signaling for
extended distances in horizontal cabling. Signal
amplifiers are not required for a length of 328 feet
(100 M). Applications can include Voice, ISDN, ATM
155 Mbps, ATM 622 Mbps, 100Mbps TPDDI, Fast
and Giga Ethernet, and IEEE 802.3/5/12, 100 BASE
VG (100 BASE NE), 100 BASE-T Mbps TP-PMD,
1000 Base-T, Higher Headroom, Higher Bandwidth,
Higher Speed.
: 4 Pair Unshielded Twisted Pair
(UTP) Category 6 LAN Cable
NEXT
(dB) Min
65.31
50.31
47.25
45.80
42.89
38.38
35.31
34.10
33.10
32.70
32.40
31.50
30.80
85.66
75.54
74.16
68.72
64.56
63.34
54.77
53.26
52.68
51.55
50.80
47.51
46.63
PS NEXT
(dB) Min
62.31
47.31
44.25
42.80
39.89
35.38
32.31
31.10
30.10
29.70
29.40
28.50
27.80
76.60
62.39
60.59
59.92
57.73
52.87
48.49
46.62
45.78
43.15
42.98
40.68
40.08
ELFEXT
(dB) Min
63.75
43.75
39.67
37.73
33.86
27.83
23.75
22.20
20.80
20.30
19.90
18.60
17.70
CAT 5 E+ Specification
Typical Cable Performance of CAT 5 E+ (200 MHz Giga lan cable)
73.46
58.61
57.48
52.43
48.79
45.09
43.65
42.85
42.64
42.08
41.66
39.92
39.85
PS
ELFEXT
(dB) Min
60.75
40.75
36.67
34.73
30.86
24.83
20.75
19.20
17.80
17.30
16.90
15.60
14.70
71.30
57.93
56.81
50.38
47.99
44.28
42.76
41.69
41.56
41.06
40.96
38.76
38.12
ACR/NEXT
(dB) Min
63.51
44.51
40.75
37.60
32.49
26.68
18.31
12.20
9.30
8.00
7.10
4.00
1.60
85.17
69.36
65.86
62.52
54.43
49.26
36.62
34.82
32.30
27.86
26.52
24.56
23.77
Packaging
: Tangle free cable pack in
laminated box with UL Listing &
Verification Label
Application :
This Category 6+, four pair cable is a high-speed,
high performance, 100 ohm impedance cable
capable of carrying high bit-rate signaling for
extended distances in horizontal cabling. Signal
amplifiers are not required for a length of 328 feet
(100 M). Applications can include Voice, ISDN, ATM
155 Mbps, ATM 622 Mbps 100 Mbps TPDDI, Fast
and Giga Ethernet, and IEEE 802.3/5/12, 100 BASE
VG (100 BASE NE), 100 BASE-T, 100 Mbps TP-PMD,
1000 BASE-T, 10Gb and any other future
applications designed for Category 6 Cables.
Physical Specification :
Conductor : 23 AWG Annealed bare solid copper
Insulation : High Density Polyethylene
Sheath
Separator
Approx.
Cable OD
Sheath Colour
Operating
Environment
Flame Rating
: Pair 1 : White - Blue
Pair 2 : White - Orange
Pair 3 : White - Green
Pair 4 : White - Brown
: Fire Retardant PVC Compound
: Star shaped
: 6.8 mm Max.
: Green
: Indoor
: 75 deg.C As per Vertical Tray Flame
Test as per UL 1685. CM rating.
Electrical Performance : (At 600 MHz)
Standards
: TIA / EIA 568 B.2-1
Impedance
: 100 +/- 15 ohm
Velocity
of Propagation : 62.10% min. @ 250 MHz
Propagation : 536 ns / 100 mtrs. max. @ 20 deg.C
Delay
@ 250 Mhz
Delay Skew
: 45 ns /100 mtrs. max. @ 20 deg. C
for 1 MHz~250 MHz
DC Resistance : 9.38 ohm / 100 mtrs. max.
@ 20 deg. C
Mutual
Capacitance : 5.60 nF / 100 mtrs. max. at 1000 Hz
Comparative Performance : Advantage Finolex
Frequency
(Mhz)
1.00
4.00
8.00
10.00
16.00
20.00
25.00
31.25
62.50
100.00
110.00
120.00
140.00
155.00
175.00
200.00
210.00
220.00
230.00
240.00
250.00
300.00
350.00
400.00
450.00
500.00
550.00
600.00
Attenuation
(MAX)
at 20 Deg. C
dB/100 M
Spec. Typical
2.03 1.98
3.78 3.70
5.32 5.20
5.95 5.82
7.55 7.38
8.47 8.28
9.51 9.29
10.67 10.43
15.38 15.04
19.80 19.37
20.85 20.40
21.86 21.40
23.79 23.28
25.16 24.63
26.91 26.34
28.98 28.38
29.78 29.16
30.57 29.94
31.34 30.69
32.10 31.44
32.85 32.17
36.43 35.69
39.79 38.98
42.97 42.11
46.01 45.10
48.94 47.98
51.76 50.76
54.49 53.45
CAT 6 Specification
NEXT
(MIN)
(dB)
Spec.
74.30
65.27
60.75
59.30
56.24
54.78
53.33
51.88
47.36
44.30
43.68
43.11
42.11
41.45
40.65
39.78
39.47
39.16
38.87
38.60
38.33
37.14
36.14
35.27
34.50
33.82
33.19
32.63
Typical
80.08
71.05
66.54
65.08
62.02
60.57
59.12
57.66
53.15
50.08
49.46
48.90
47.89
47.23
46.44
45.57
45.25
44.95
44.66
44.38
44.12
42.93
41.92
41.05
40.29
39.60
38.98
38.41
PS NEXT
(MIN)
(dB)
Spec.
72.30
63.27
58.75
57.30
54.24
52.78
51.33
49.88
45.36
42.30
41.68
41.11
40.11
39.45
38.65
37.78
37.47
37.16
36.87
36.60
36.33
35.14
34.14
33.27
32.50
31.82
31.19
30.63
Typical
77.88
68.85
64.34
62.88
59.82
58.37
56.92
55.46
50.95
47.88
47.26
46.70
45.69
45.03
44.24
43.37
43.05
42.75
42.46
42.18
41.92
40.73
39.72
38.85
38.09
37.40
36.78
36.21
ACR NEXT
(MIN)
(dB)
Spec.
72.28
61.49
55.43
53.35
48.68
46.31
43.83
41.20
31.98
24.50
22.83
21.25
18.32
16.28
13.75
10.80
9.68
8.59
7.53
6.49
5.48
0.72
-
Typical
78.06
67.27
61.22
59.13
54.47
52.10
49.61
46.99
37.76
30.28
28.61
27.03
24.10
22.07
19.53
16.59
15.47
14.38
13.32
12.28
11.27
6.50
2.14
-
Listed & Verified
ACR PSNEXT
(MIN)
(dB)
Spec.
70.28
59.49
53.43
51.35
46.68
44.31
41.83
39.20
29.98
22.50
20.83
19.25
16.32
14.28
11.75
8.80
7.68
6.59
5.53
4.49
3.48
-
Typical
75.90
65.15
59.14
57.07
52.44
50.09
47.62
45.03
35.90
28.51
26.86
25.30
22.41
20.40
17.90
14.99
13.89
12.81
11.76
10.74
9.74
5.04
0.74
-
ELFEXT
(MIN)
(dB/100 M)
Spec.
67.80
55.76
49.74
47.80
43.72
41.78
39.84
37.90
31.88
27.80
26.97
26.22
24.88
23.99
22.94
21.78
21.36
20.95
20.57
20.20
19.84
18.26
16.92
15.76
14.74
13.82
12.99
12.24
Typical
70.75
58.71
52.69
50.75
46.67
44.73
42.79
40.86
34.83
30.75
29.92
29.17
27.83
26.95
25.89
24.73
24.31
23.90
23.52
23.15
22.79
21.21
19.87
18.71
17.69
16.77
15.95
15.19
PS ELFEXT
(MIN)
(dB/100 M)
Spec.
64.80
52.76
46.74
44.80
40.72
38.78
36.84
34.90
28.88
24.80
23.97
23.22
21.88
20.99
19.94
18.78
18.36
17.95
17.57
17.20
16.84
15.26
13.92
12.76
11.74
10.82
9.99
9.24
Typical
67.75
55.71
49.69
47.75
43.67
41.73
39.79
37.86
31.83
27.75
26.92
26.17
24.83
23.95
22.89
21.73
21.31
20.90
20.52
20.15
19.79
18.21
16.87
15.71
14.69
13.77
12.95
12.19
Typical Cable Performance
*Performance specification extended to frequencies upto 600 MHz
RETURN LOSS
(MIN)
(dB)
Spec.
20.00
23.01
24.52
25.00
25.00
25.00
24.17
23.33
20.74
18.99
18.63
18.31
17.73
17.35
16.90
16.40
16.22
16.04
15.88
15.72
15.57
14.89
32.72
33.01
33.27
33.49
26.00
12.30
Typical
42.27
38.05
35.95
35.27
33.84
33.16
32.48
31.80
29.70
28.27
27.98
27.71
27.24
26.93
26.57
26.16
26.01
25.87
25.74
25.61
25.48
21.93
21.46
21.05
20.69
20.37
20.08
19.82
FINOLEX 25 PAIR CAT-5 LAN CABLES – INDOOR AND AERIAL
The 25 pair Cat-5 LAN cable for indoor application consists of a solid bare annealed copper conductor of 24 AWG (0.5 mm), insulated
with High Density Polyethylene compound, colour coded, paired as per colour combinations given in the table. Twenty-five such pairs
are twisted together to form a laid up cable, a nylon binder is applied helically. The cable is jacketed with a speical FR PVC compound
formulated and manufactured in-house which has high Oxygen and Temperature Index. The colour of the jacket is grey. The cable is
ideal for use in vertical backbone structured cabling.
In case of aerial cable, a polyester tape is applied round the 25 pairs, along with a poly laminated aluminium tape applied with an
overlap. It is then jacketed along with a stranded
galvanized steel wire strength member with a black
coloured polyethylene compound. The cable
construction forms the ‘Figure 8’ when seen in a
cross section. The cable is most suited for outdoor
installations.
The above cables are ideal for voice as well as data
transmission and are suitable for broadband
application. These cables generally conform to
TIA/EIA-568 B.2 specification.
FINOLEX CABLES LIMITED
Finolex Cables Limited, the flagship company of the Finolex Group, today, is India’s leading manufacturer of
electrical and telecommunication cables. It manufactures a wide range of wires and cables for diverse
application areas. The company has, over the years, established its reputation as an innovative leader and
quality manufacturer by continuously upgrading technology, modernizing manufacturing facilities and
maintaining the highest standards in quality and service.
The company has expanded from its first plant at Pimpri in Pune to a plant at Urse and a new plant at Goa. All
the plants are accredited with IS/ISO 9001. In addition the plant at Urse and Goa have been recently awarded
IS/ISO 14001 certification.
Finolex Cables takes pride in being the only company in India that is able to offer 'Total Cable Solutions'. The
Stringent quality control at every stage from raw
material through manufacturing upto the finished
product guarantees high quality and long life under
extreme operating conditions. These are available
in wooden reels of 305 mtrs. length.
product portfolio includes PVC electrical cables, Flexible cables for industry, cables for the agricultural and
Salient Features :
The backward integration of the group into manufacturing PVC Resin at Finolex Industries, Ratnagiri and
l Low Attenuation
l Low Crosstalk
Finolex
automobile sectors and LT Power & Control cables. Its communication cable range includes Jelly Filled
Telephone cables, Co-axial Trunk, Branch & Drop cables for Cable Television, Lan cables and Copper and
CAT 5E LAN CABLE
Fiber Components from Leviton of U.S.A. for structured cabling.
99.97% electrolytic grade Continuous Cast Copper rods at its plants in Goa puts Finolex Cables in a unique
l Low Return Loss
position of having total control on the quality of its products.
INDOOR CABLE
The copper and PVC meet the highest standards of purity. This forms the core of every quality cable
manufactured by Finolex.
Nylon Rip Cord
CAT 5E+ LAN CABLE
FR PVC Jacket
25
years
Y
NT
IF
E
I
and Components. Optinet is designed to provide a no-risk
AERIAL CABLE
OLEX
TE M
CERT
cabling solution featuring a complete range of Finolex Cables
FIN
D
A
W ARR
YS
Finolex Cables Ltd. brings you Optinet, a high-quality, end to end
S
OPTINET STRUCTURED CABLING SYSTEMS
Pair (25 Nos.)
G
C ABLI N
cabling system with ample headroom that not only meets but
Steel Wires
Strength Member
CAT 6 LAN CABLE
exceeds industry requirements. Optinet seamlessly merges every
aspect of your complete cabling system from connectors to cable
to wallplates to patch panels and accessories. The Optinet
Web
Cabling System is distinguished by quality design and
manufacturing. Finolex offers a variety of services that enhance
Aluminium Tape
the value of the system, including consultancy, site
evaluation, network planning, training, site audits and
a 25-year Performance Warranty. All combining to make
Optinet the finest Structured Cabling System available in India.
CAT 6+ LAN CABLE
Net
STRUCTURED CABLING SYSTEMS
Connections you can rely on
Bandwidth and Speed
in the Ultimate
Lan Cabling Solutions
Polyethylene Jacket
Net
Polyester Tape
Pair (25 Nos.)
All information given herein is in good faith. Finolex shall not be liable for any damages arising out of incorrect use or interpretation.
The Company reserves the right to change any of the above specifications without any prior notice.
STRUCTURED CABLING SYSTEMS
Connections you can rely on
FINOLEX 25 PAIR CAT-5 LAN CABLES – INDOOR AND AERIAL
The 25 pair Cat-5 LAN cable for indoor application consists of a solid bare annealed copper conductor of 24 AWG (0.5 mm), insulated
with High Density Polyethylene compound, colour coded, paired as per colour combinations given in the table. Twenty-five such pairs
are twisted together to form a laid up cable, a nylon binder is applied helically. The cable is jacketed with a speical FR PVC compound
formulated and manufactured in-house which has high Oxygen and Temperature Index. The colour of the jacket is grey. The cable is
ideal for use in vertical backbone structured cabling.
In case of aerial cable, a polyester tape is applied round the 25 pairs, along with a poly laminated aluminium tape applied with an
overlap. It is then jacketed along with a stranded
galvanized steel wire strength member with a black
coloured polyethylene compound. The cable
construction forms the ‘Figure 8’ when seen in a
cross section. The cable is most suited for outdoor
installations.
The above cables are ideal for voice as well as data
transmission and are suitable for broadband
application. These cables generally conform to
TIA/EIA-568 B.2 specification.
FINOLEX CABLES LIMITED
Finolex Cables Limited, the flagship company of the Finolex Group, today, is India’s leading manufacturer of
electrical and telecommunication cables. It manufactures a wide range of wires and cables for diverse
application areas. The company has, over the years, established its reputation as an innovative leader and
quality manufacturer by continuously upgrading technology, modernizing manufacturing facilities and
maintaining the highest standards in quality and service.
The company has expanded from its first plant at Pimpri in Pune to a plant at Urse and a new plant at Goa. All
the plants are accredited with IS/ISO 9001. In addition the plant at Urse and Goa have been recently awarded
IS/ISO 14001 certification.
Finolex Cables takes pride in being the only company in India that is able to offer 'Total Cable Solutions'. The
Stringent quality control at every stage from raw
material through manufacturing upto the finished
product guarantees high quality and long life under
extreme operating conditions. These are available
in wooden reels of 305 mtrs. length.
product portfolio includes PVC electrical cables, Flexible cables for industry, cables for the agricultural and
Salient Features :
The backward integration of the group into manufacturing PVC Resin at Finolex Industries, Ratnagiri and
l Low Attenuation
l Low Crosstalk
Finolex
automobile sectors and LT Power & Control cables. Its communication cable range includes Jelly Filled
Telephone cables, Co-axial Trunk, Branch & Drop cables for Cable Television, Lan cables and Copper and
CAT 5E LAN CABLE
Fiber Components from Leviton of U.S.A. for structured cabling.
99.97% electrolytic grade Continuous Cast Copper rods at its plants in Goa puts Finolex Cables in a unique
l Low Return Loss
position of having total control on the quality of its products.
INDOOR CABLE
The copper and PVC meet the highest standards of purity. This forms the core of every quality cable
manufactured by Finolex.
Nylon Rip Cord
CAT 5E+ LAN CABLE
FR PVC Jacket
25
years
Y
NT
IF
E
I
and Components. Optinet is designed to provide a no-risk
AERIAL CABLE
OLEX
TE M
CERT
cabling solution featuring a complete range of Finolex Cables
FIN
D
A
W ARR
YS
Finolex Cables Ltd. brings you Optinet, a high-quality, end to end
S
OPTINET STRUCTURED CABLING SYSTEMS
Pair (25 Nos.)
G
C ABLI N
cabling system with ample headroom that not only meets but
Steel Wires
Strength Member
CAT 6 LAN CABLE
exceeds industry requirements. Optinet seamlessly merges every
aspect of your complete cabling system from connectors to cable
to wallplates to patch panels and accessories. The Optinet
Web
Cabling System is distinguished by quality design and
manufacturing. Finolex offers a variety of services that enhance
Aluminium Tape
the value of the system, including consultancy, site
evaluation, network planning, training, site audits and
a 25-year Performance Warranty. All combining to make
Optinet the finest Structured Cabling System available in India.
CAT 6+ LAN CABLE
Net
STRUCTURED CABLING SYSTEMS
Connections you can rely on
Bandwidth and Speed
in the Ultimate
Lan Cabling Solutions
Polyethylene Jacket
Net
Polyester Tape
Pair (25 Nos.)
All information given herein is in good faith. Finolex shall not be liable for any damages arising out of incorrect use or interpretation.
The Company reserves the right to change any of the above specifications without any prior notice.
STRUCTURED CABLING SYSTEMS
Connections you can rely on
RG6 CCS
For DTH & Drop Cable Applications
An IS/ISO 9001 Company
Co-Axial Copper Clad Cables
Finolex
GAS INJECTED PHYSICAL FOAM CO-AXIAL CABLES WITH SPECIAL COPPER CLAD STEEL (CCS) CONDUCTOR
Finolex co-axial cables used for DTH and CATV networks are designed for optimum performance and value for money. The arithmetic is very simple.
The cables offer higher bandwidth, so your customers can receive the maximum number of channels with a high level of picture and sound quality.
These cables are uniquely designed for specialised applications. This translates to more happy customers, larger cable TV networks and more profits
for the cable operators. The cable is with central conductor of Copper Clad Steel (CCS) which offers high mechanical strength and hence can support
longer span without stretching. The cable withstands all mechanical abuses during operations. Due to the principle of skin effect, the copper cladding
over steel conductor carries signal without any loss of signal quality.
WORLD-CLASS DESIGN & TECHNOLOGY
l
Nitrogen gas injected physical foam dielectric manufactured by using imported polyethylene.
The gas injected foam is far superior to the chemical foam.
l
Stringent raw material, in-process and final testing ensures consistent quality which
guarantees reliable and long-lasting performance.
l
UV and abrasion resistant outer jacket is of a special grade PVC compound in black colour
PARAMETERS
A. CONSTRUCTION
1 Inner Conductor
l
Cable is sequentially marked along the length at every metre.
5
Nominal Diameter (mm)
Dielectric
Nominal Diameter (mm)
Outer Conductor
First
l
Each length of the cable is 100% tested on an imported Hewlett Packard high frequency
6
7
8
9
10
11
B.
1
2
3
C.
Second
Nominal Coverage (%)
Flooding Compound
Jacket
Nominal Diameter (mm)
Bending radius, Minimum (mm)
ELECTRICAL
Nominal Capacitance (pf/mtr.)
Nominal Impedance (Ohm)
Nominal Velocity Ratio (%)
ATTENUATION (@ 200C)
that is formulated in-house using PVC resin manufactured by Group company - Finolex
Industries, Ratnagiri.
computerised Network Analyser, for Attenuation, Impedance, and Structural Return Loss
(SRL) up to 1 GHz.
l
Complete manufacturing of cable is done in-house on ultra-modern imported machinery.
COPPER CLAD STEEL (CCS) CABLES
CONSTRUCTION - RG6F CCS
Copper clad steel conductor
Gas injected physical foam dielectric
2
3
4
Poly-laminated aluminium tape
Jelly Flooding
Aluminium braiding with high tensile strength
UV resistant outer PVC jacket
All information given herein is in good faith. Finolex shall not be liable for any damages arising out of incorrect use or interpretation.
The Company reserves the right to change any of the above specifications without any prior notice.
FREQUENCY MHz
55
211
400
600
750
865
1000
RG6F CCS
Copper Clad
Steel
1.02
Foam PE
4.57
Bonded
Al Tape
Al Braid
60
Jelly
PVC (Black)
7.0
65
53
75
85
dB/100m
Max.
5.20
9.50
13.30
16.45
18.35
19.95
21.45
TEST PARAMETERS
VALUES AS PER INDIAN DOT
TEST PARAMETERS
FOR SOLID PIJF CABLES
VALUES AS PER INDIAN DOT
FOR FOAM SKIN PIJF CABLES
1) Conductor diameter (Nom) mm
0.40
0.50
0.63
0.90
1) Conductor diameter (Nom) mm
0.40
0.50
0.63
0.90
2) Conductor Reistance for Cable
Ω/Km at 200C
135 ± 8
86 ± 6
58 ± 4
28 ± 2
2) Conductor Reistance for Cable
Ω/Km at 200C
135 ± 8
86 ± 6
58 ± 4
28 ± 2
3) Resistance Unbalance
Ind. max. %
3.0
2.5
2.0
2.0
Ind. max. %
3.0
2.5
2.0
2.0
Avg. max. %
1.5
1.0
1.0
1.0
Avg. max. %
1.5
1.0
1.0
1.0
4) Mutual Capacitance at 800/1000 Hz
4) Mutual Capacitance at 800/1000 Hz
Ind. max. nf/Km
52 ± 4.5
Ind. max. nf/Km
52 ± 4.5
Avg. max. nf/Km
52 ± 3.0
Avg. max. nf/Km
52 ± 3.0
5) Insulation Resistance MΩ/Km min.
5000
6) Capacitance Unbalance at 800/1000 Hz
a) Pair to Pair
FOR PCM CABLES
Ind. max. pf/Km
Avg. max. pf/Km
b) Pair to Ground Ind. max. pf/Km
200
1) Conductor diameter (Nom) mm
0.63
50
2) Conductor Reistance for Cable
Ω/Km at 200C
58 ± 4
3000
Avg. max. pf/Km
7) Attenuation @ 150 KHz Avg max. dB/Km
3) Resistance Unbalance
750
12.0
8.25
6.3
4.4
Cross Talk at 150 KHz
i) NEXT
min. dB
55
ii) ELFEXT
Ind. min. dB/Km
RMS min. dB/Km
l
Finolex
3) Resistance Unbalance
Ind. max. %
2.0
Avg. max. %
1.0
4) Mutual Capacitance at 800/1000 Hz
55
Ind. max. nf/Km
52 ± 4
67.8
Avg. max. nf/Km
52 ± 2
Cable conforms to respective DOT specifications
MANUFACTURING CAPABILITY TO INTERNATIONAL SPECIFICATIONS
Some of the overseas telecommunication authorities whose telephone cable specifications
we can match are as follows :
Organisation
Country
Bahrain Telecommunications Company (BATELCO)
Bahrain
Telecommunications Authority
Cyprus
Telecommunications Company of Tehran (TCT)
Iran
Iraq Telecommunications Post (ITP)
Iraq
Telekom Malaysia
Malaysia
Nepal Telecommunications Corporation (NTC)
Nepal
Nigerian Telecommunications Ltd. (NTL)
Nigeria
Oman Telecommunicatons (Omantel)
Oman
Pakistan Telegraph & Telephones (PTT)
Pakistan
Qatar Telecommunications (Q-Tel)
Qatar
SOVBUNKER
Russia
Saudi Telecom Company (STC)
Saudi Arabia
Singapore Telecom
Singapore
Department of Telecommunications
Sri Lanka
Sudan Telecom Co. (Sudatel)
Sudan
Public Telecommunications Establishment (PTE)
Syria
The Emirates Telecommunications Corporation Ltd. (ETISALAT)
U.A.E.
Public Telecommunications Company (PTC)
Yemen
All information given herein is in good faith. Finolex shall not be liable for any damages arising out of incorrect use or interpretation.
The Company reserves the right to change any of the above specifications without any prior notice.
An IS / ISO 9001 Company
Jelly Filled Telecommunication Cables
ELECTRICAL CHARACTERISTICS
POLYETHYLENE INSULATED
JELLY FILLED
TELEPHONE CABLES
Effective communication plays a vital role in the economic
growth of any country. Keeping this in mind, FINOLEX is
the pioneer Indian company to enter the
Telecommunication field by manufacturing polyethylene
insulated Jelly Filled Telephone Cables (PIJF), that meet
exacting standards of the Indian Telephone Department.
Finolex Cables Ltd., has ultra-modern plants at Urse (near
Pune) and Verna (Goa) with sophisticated equipment, to
manufacture these cables, which have been supplied to
the Department of Telecommunication for over fifteen
years. Besides, prestigious Public Sector Undertakings
such as MTNL, Defence, Railways, Steel Plants and
Fertilizer Units are also on our valued list of satisfied
customers.
Over the years, FINOLEX has developed the facililities
to manufacture and test Jelly Filled Telephone Cables
conforming to international specifications and standards
of U.S. (Bell and REA), Singapore, U.A.E., Saudi Arabia,
Iran, Cyprus, Nepal, Sri Lanka, Russia, Nigeria, Sudan,
etc.
CABLE CONSTRUCTION
Conductor :
Each conductor consists of a round wire of annealed
high conductivity copper, smoothly drawn with uniform
diameter and resistance.
Insulation :
Each conductor is insulated with either solid medium/
high density polyethylene or Foam Skin polyethylene
insulation. The conductor is insulated uniformly in various
colours with extremely tight tolerances to help the cable
meet the electrical and transmission requirements of
specification.
Pairs :
Individual insulated conductors are twisted together with
a uniform lay to form a pair. The length of the lay of each
pair is different from that of the adjacent pair to enable
the cable to meet the capacitance unbalance and cross
talk requirements of the specifications. The pairs have
specific colour combination for easy identification.
Units :
The twisted pairs are stranded in a single unit of 10, 20
and 25 pairs and wrapped helically with an identification
colour binder. For higher pairage cable, a number of units
are stranded together to form a super unit. A coloured
identification binder is wrapped around the super units
for easy identification.
Jelly Filling :
These units or super units are then laid up to form the
core of the cable. During this operation a water resistant
filling compound is introduced to fully fill the interstices
of the laid up core. This filling compound acts as a
dielectric between the pairs as well as a moisture barrier.
The filling compound is compatible with polyethylene
insulation whereby the cable’s electrical and physical
characteristics are not affected.
Solid polyethylene insulated cables without moisture
resistant filling compound as an Air Core Cable can also
be manufactured.
Core Wrap :
The Jelly Filled laid up cable is then covered with a layer
of non-hygroscopic polyester tape to contain the jelly. This
also acts as a mechanical protection to the cable core,
and as a dieletric.
Aluminium Poly-Laminate Screen :
An aluminium tape coated on both sides with polyethylene
is applied longitudinally over the core wrap. This helps in
preventing electrical interference induced by other Power
Cables laid in parallel. It also acts as a moisture barrier.
SPECIAL CABLES
Foam Skin Cable
PCM (Pulse Code Modular) Cable
Foam Skin Cable is a technologically upgraded version
of Jelly Filled Telephone Cables. These are of two types
- Air Core and Filled Type. The conductor is insulated
with Foam polyethylene coated by dual extrusion,
providing a protective layer of solid colour skin insulation.
This cable is a high frequency cable, divided in two
compartments, one to carry the signal and the second to
bring back the signal. It withstands more circuits on the
same pair.
As a result, there is considerable saving in raw material,
and the cable size is reduced. Since the wire diameter is
smaller, the overall diameter of the cable is proportionately
smaller, thereby enabling larger of pairs/cables to be
accommodated in smaller ducts. The electrical
parameters, however, remain the same.
FINOLEX is the first company in India to manufacture
and obtain type approval for these cables, for the
Mahanagar Telephone Nigam Ltd. (MTNL).
Quad Cable
In this type, four wires are twisted to form two pairs and
two circuits. The diameter of a single wire is reduced in
this configuration, but the electrical parameters remain
unchanged. This cable is basically used for Trunk/Carrier
communication.
Constructionally it consists of 4 mil polyolefin coated flat
aluminium screen which divides the cable core in two
compartments. The integral screen/shield is formed in a
manner such that it shields the compartment and isolates
each compartment. Additionally, one more aluminium
shield is applied over the cable core to prevent electrical
interference from outside sources. The cable design
satisfies the original requirements of two cables under
one sheath for Pulse Code Modular carrier application.
Cables are generally manufactured for 24 channel in 772
KHz transmission and 48 channel of 1,576 KHz
transmission.
Further details about various other combinations of cable
constructions are available on specific request.
Polyethylene
Insulated
Copper
Conductor
Inner Sheath :
A tight-fitting sheath of black virgin polyethylene is then
extruded over the Aluminium Polylaminated Screen, which
offers protection to the cable.
Bedding And Armouring :
A double polyethylene tape is applied helically over the
inner sheath with a suitable overlap. This acts as a
bedding for the steel tape. The cable is then helically
armoured with double galvanized steel tapes with a suitable
overlap. This offers mechanical protection to the cable.
Outer Jacket :
A tight-fitting jacket of specially formulated black virgin
polyethylene is extruded over the armoured cable. This
acts as a mechanical protection and protection against
ultra-violet rays.
Marking :
The company’s name, cable size, year of manufacture
and the telephone handset emblem is put on the outer
jacket for identification. There is also a number marking
printed on the cable progressing sequentially at every one
meter.
Testing :
Each cable drum is tested on a computer controlled
automatic testing Bridge, for the electrical and
transmission parameters, before the cable is offered to
the customer.
Insterstices
filled with
Jelly
Core Wrap
Aluminium Poly Laminate Screen
Polyethylene Sheath
Polyethylene Tape bedding
Galvanized Double Steel Tape Armour
Polyethylene Outer Jacket
POLYETHYLENE INSULATED
JELLY FILLED
TELEPHONE CABLES
Effective communication plays a vital role in the economic
growth of any country. Keeping this in mind, FINOLEX is
the pioneer Indian company to enter the
Telecommunication field by manufacturing polyethylene
insulated Jelly Filled Telephone Cables (PIJF), that meet
exacting standards of the Indian Telephone Department.
Finolex Cables Ltd., has ultra-modern plants at Urse (near
Pune) and Verna (Goa) with sophisticated equipment, to
manufacture these cables, which have been supplied to
the Department of Telecommunication for over fifteen
years. Besides, prestigious Public Sector Undertakings
such as MTNL, Defence, Railways, Steel Plants and
Fertilizer Units are also on our valued list of satisfied
customers.
Over the years, FINOLEX has developed the facililities
to manufacture and test Jelly Filled Telephone Cables
conforming to international specifications and standards
of U.S. (Bell and REA), Singapore, U.A.E., Saudi Arabia,
Iran, Cyprus, Nepal, Sri Lanka, Russia, Nigeria, Sudan,
etc.
CABLE CONSTRUCTION
Conductor :
Each conductor consists of a round wire of annealed
high conductivity copper, smoothly drawn with uniform
diameter and resistance.
Insulation :
Each conductor is insulated with either solid medium/
high density polyethylene or Foam Skin polyethylene
insulation. The conductor is insulated uniformly in various
colours with extremely tight tolerances to help the cable
meet the electrical and transmission requirements of
specification.
Pairs :
Individual insulated conductors are twisted together with
a uniform lay to form a pair. The length of the lay of each
pair is different from that of the adjacent pair to enable
the cable to meet the capacitance unbalance and cross
talk requirements of the specifications. The pairs have
specific colour combination for easy identification.
Units :
The twisted pairs are stranded in a single unit of 10, 20
and 25 pairs and wrapped helically with an identification
colour binder. For higher pairage cable, a number of units
are stranded together to form a super unit. A coloured
identification binder is wrapped around the super units
for easy identification.
Jelly Filling :
These units or super units are then laid up to form the
core of the cable. During this operation a water resistant
filling compound is introduced to fully fill the interstices
of the laid up core. This filling compound acts as a
dielectric between the pairs as well as a moisture barrier.
The filling compound is compatible with polyethylene
insulation whereby the cable’s electrical and physical
characteristics are not affected.
Solid polyethylene insulated cables without moisture
resistant filling compound as an Air Core Cable can also
be manufactured.
Core Wrap :
The Jelly Filled laid up cable is then covered with a layer
of non-hygroscopic polyester tape to contain the jelly. This
also acts as a mechanical protection to the cable core,
and as a dieletric.
Aluminium Poly-Laminate Screen :
An aluminium tape coated on both sides with polyethylene
is applied longitudinally over the core wrap. This helps in
preventing electrical interference induced by other Power
Cables laid in parallel. It also acts as a moisture barrier.
SPECIAL CABLES
Foam Skin Cable
PCM (Pulse Code Modular) Cable
Foam Skin Cable is a technologically upgraded version
of Jelly Filled Telephone Cables. These are of two types
- Air Core and Filled Type. The conductor is insulated
with Foam polyethylene coated by dual extrusion,
providing a protective layer of solid colour skin insulation.
This cable is a high frequency cable, divided in two
compartments, one to carry the signal and the second to
bring back the signal. It withstands more circuits on the
same pair.
As a result, there is considerable saving in raw material,
and the cable size is reduced. Since the wire diameter is
smaller, the overall diameter of the cable is proportionately
smaller, thereby enabling larger of pairs/cables to be
accommodated in smaller ducts. The electrical
parameters, however, remain the same.
FINOLEX is the first company in India to manufacture
and obtain type approval for these cables, for the
Mahanagar Telephone Nigam Ltd. (MTNL).
Quad Cable
In this type, four wires are twisted to form two pairs and
two circuits. The diameter of a single wire is reduced in
this configuration, but the electrical parameters remain
unchanged. This cable is basically used for Trunk/Carrier
communication.
Constructionally it consists of 4 mil polyolefin coated flat
aluminium screen which divides the cable core in two
compartments. The integral screen/shield is formed in a
manner such that it shields the compartment and isolates
each compartment. Additionally, one more aluminium
shield is applied over the cable core to prevent electrical
interference from outside sources. The cable design
satisfies the original requirements of two cables under
one sheath for Pulse Code Modular carrier application.
Cables are generally manufactured for 24 channel in 772
KHz transmission and 48 channel of 1,576 KHz
transmission.
Further details about various other combinations of cable
constructions are available on specific request.
Polyethylene
Insulated
Copper
Conductor
Inner Sheath :
A tight-fitting sheath of black virgin polyethylene is then
extruded over the Aluminium Polylaminated Screen, which
offers protection to the cable.
Bedding And Armouring :
A double polyethylene tape is applied helically over the
inner sheath with a suitable overlap. This acts as a
bedding for the steel tape. The cable is then helically
armoured with double galvanized steel tapes with a suitable
overlap. This offers mechanical protection to the cable.
Outer Jacket :
A tight-fitting jacket of specially formulated black virgin
polyethylene is extruded over the armoured cable. This
acts as a mechanical protection and protection against
ultra-violet rays.
Marking :
The company’s name, cable size, year of manufacture
and the telephone handset emblem is put on the outer
jacket for identification. There is also a number marking
printed on the cable progressing sequentially at every one
meter.
Testing :
Each cable drum is tested on a computer controlled
automatic testing Bridge, for the electrical and
transmission parameters, before the cable is offered to
the customer.
Insterstices
filled with
Jelly
Core Wrap
Aluminium Poly Laminate Screen
Polyethylene Sheath
Polyethylene Tape bedding
Galvanized Double Steel Tape Armour
Polyethylene Outer Jacket
TEST PARAMETERS
VALUES AS PER INDIAN DOT
TEST PARAMETERS
FOR SOLID PIJF CABLES
VALUES AS PER INDIAN DOT
FOR FOAM SKIN PIJF CABLES
1) Conductor diameter (Nom) mm
0.40
0.50
0.63
0.90
1) Conductor diameter (Nom) mm
0.40
0.50
0.63
0.90
2) Conductor Reistance for Cable
Ω/Km at 200C
135 ± 8
86 ± 6
58 ± 4
28 ± 2
2) Conductor Reistance for Cable
Ω/Km at 200C
135 ± 8
86 ± 6
58 ± 4
28 ± 2
3) Resistance Unbalance
Ind. max. %
3.0
2.5
2.0
2.0
Ind. max. %
3.0
2.5
2.0
2.0
Avg. max. %
1.5
1.0
1.0
1.0
Avg. max. %
1.5
1.0
1.0
1.0
4) Mutual Capacitance at 800/1000 Hz
4) Mutual Capacitance at 800/1000 Hz
Ind. max. nf/Km
52 ± 4.5
Ind. max. nf/Km
52 ± 4.5
Avg. max. nf/Km
52 ± 3.0
Avg. max. nf/Km
52 ± 3.0
5) Insulation Resistance MΩ/Km min.
5000
6) Capacitance Unbalance at 800/1000 Hz
a) Pair to Pair
FOR PCM CABLES
Ind. max. pf/Km
Avg. max. pf/Km
b) Pair to Ground Ind. max. pf/Km
200
1) Conductor diameter (Nom) mm
0.63
50
2) Conductor Reistance for Cable
Ω/Km at 200C
58 ± 4
3000
Avg. max. pf/Km
7) Attenuation @ 150 KHz Avg max. dB/Km
3) Resistance Unbalance
750
12.0
8.25
6.3
4.4
Cross Talk at 150 KHz
i) NEXT
min. dB
55
ii) ELFEXT
Ind. min. dB/Km
RMS min. dB/Km
l
Finolex
3) Resistance Unbalance
Ind. max. %
2.0
Avg. max. %
1.0
4) Mutual Capacitance at 800/1000 Hz
55
Ind. max. nf/Km
52 ± 4
67.8
Avg. max. nf/Km
52 ± 2
Cable conforms to respective DOT specifications
MANUFACTURING CAPABILITY TO INTERNATIONAL SPECIFICATIONS
Some of the overseas telecommunication authorities whose telephone cable specifications
we can match are as follows :
Organisation
Country
Bahrain Telecommunications Company (BATELCO)
Bahrain
Telecommunications Authority
Cyprus
Telecommunications Company of Tehran (TCT)
Iran
Iraq Telecommunications Post (ITP)
Iraq
Telekom Malaysia
Malaysia
Nepal Telecommunications Corporation (NTC)
Nepal
Nigerian Telecommunications Ltd. (NTL)
Nigeria
Oman Telecommunicatons (Omantel)
Oman
Pakistan Telegraph & Telephones (PTT)
Pakistan
Qatar Telecommunications (Q-Tel)
Qatar
SOVBUNKER
Russia
Saudi Telecom Company (STC)
Saudi Arabia
Singapore Telecom
Singapore
Department of Telecommunications
Sri Lanka
Sudan Telecom Co. (Sudatel)
Sudan
Public Telecommunications Establishment (PTE)
Syria
The Emirates Telecommunications Corporation Ltd. (ETISALAT)
U.A.E.
Public Telecommunications Company (PTC)
Yemen
All information given herein is in good faith. Finolex shall not be liable for any damages arising out of incorrect use or interpretation.
The Company reserves the right to change any of the above specifications without any prior notice.
An IS / ISO 9001 Company
Jelly Filled Telecommunication Cables
ELECTRICAL CHARACTERISTICS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement