WinCC flexible 2008 Installation guide

WinCC flexible 2008 Installation guide
SIMATIC HMI WinCC flexible 2008 Installation guide
1
Installation
______________
2
Startup
______________
SIMATIC HMI
WinCC flexible 2008
Installation guide
System Manual
Printout of the Online Help
06/2008
Printout of the Online Help
Licenses and Open Source
Software
3
______________
4
Appendix
______________
Safety Guidelines
Safety Guidelines
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
CAUTION
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
NOTICE
indicates that an unintended result or situation can occur if the corresponding information is not taken into
account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning and
operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes
in this documentation qualified persons are defined as persons who are authorized to commission, ground and
label devices, systems and circuits in accordance with established safety practices and standards.
Prescribed Usage
Note the following:
WARNING
This device may only be used for the applications described in the catalog or the technical description and only
in connection with devices or components from other manufacturers which have been approved or
recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage,
positioning and assembly as well as careful operation and maintenance.
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Industry Sector
Postfach 48 48
90327 NÜRNBERG
GERMANY
Ordernumber: Printout of the Online Help
Ⓟ 07/2008
Copyright © Siemens AG 2008.
Technical data subject to change
Table of contents
1
2
3
Installation ................................................................................................................................................. 5
1.1
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
1.1.8
Installing WinCC flexible ................................................................................................................5
System requirements .....................................................................................................................5
Installation overview.......................................................................................................................8
Components.................................................................................................................................10
Execute a minimum installation or full installation .......................................................................12
Custom installation.......................................................................................................................15
Antivirus tools...............................................................................................................................19
Installing License Keys and options.............................................................................................20
Error-handling ..............................................................................................................................21
1.2
Modifying the WinCC flexible installation.....................................................................................24
1.3
1.3.1
1.3.2
1.3.3
1.3.4
Options and Powerpack...............................................................................................................25
Available options..........................................................................................................................25
Installing and uninstalling options ................................................................................................27
Powerpack ...................................................................................................................................28
Installing a Powerpack .................................................................................................................29
1.4
1.4.1
1.4.2
1.4.3
1.4.4
1.4.5
1.4.6
1.4.7
1.4.8
Licenses .......................................................................................................................................30
License Keys and Authorizations.................................................................................................30
License types ...............................................................................................................................31
Licensing of WinCC flexible Engineering Systems ......................................................................32
Requesting License Keys from a license server..........................................................................33
Licensing WinCC flexible Runtime on PC-based HMI devices....................................................35
Licensing of HMI devices .............................................................................................................36
Working with License Keys and Authorizations ...........................................................................37
Automation License Manager ......................................................................................................40
1.5
1.5.1
1.5.2
Uninstalling WinCC flexible..........................................................................................................43
Uninstalling WinCC flexible and components ..............................................................................43
Uninstalling License Keys and options ........................................................................................46
Startup ..................................................................................................................................................... 49
2.1
Overview ......................................................................................................................................49
2.2
2.2.1
2.2.2
2.2.3
2.2.4
Run WinCC flexible......................................................................................................................50
Run WinCC flexible......................................................................................................................50
Starting WinCC flexible Runtime..................................................................................................51
Non-licensed mode ......................................................................................................................52
changing the user interface language in the ES ..........................................................................53
Licenses and Open Source Software....................................................................................................... 55
3.1
Open source software used in this product .................................................................................55
3.2
License text of the GNU General Public License.........................................................................57
3.3
License text of the Apache Software License, Version 1.1 .........................................................62
3.4
License text of the OpenSSL license...........................................................................................62
Installation guide
System Manual, 06/2008, Printout of the Online Help
3
Table of contents
4
3.5
License text of the Gold Parser license ...................................................................................... 64
3.6
License text of the Common Public license ................................................................................ 65
3.7
License text of the zlib license .................................................................................................... 68
3.8
License text of the libjpeg package license................................................................................. 69
3.9
License text of the Info-ZIP license............................................................................................. 71
Appendix.................................................................................................................................................. 73
4.1
Scope of delivery......................................................................................................................... 73
Index........................................................................................................................................................ 77
4
Installation guide
System Manual, 06/2008, Printout of the Online Help
1
Installation
1.1
Installing WinCC flexible
1.1.1
System requirements
WinCC flexible Engineering System
WinCC flexible supports all PC platforms compatible with the common IBM/AT format. In
order to work efficiently with WinCC flexible, you should adhere to the recommended values.
Approved operating systems
● Windows XP Professional SP2
● Windows XP Professional SP3
● Windows Vista Business 32-bit
● Windows Vista Ultimate 32-bit
System requirements
RAM
Processor
Graph
Operating system
min. 1 GB, 2 GB recommended
Windows XP
min. 1.5 GB, 2 GB recommended
Windows Vista
min. Pentium IV or comparable
processor with 1.6 GHz,
Pentium M recommended
Windows XP
min. Pentium IV or comparable
processor with 1.6 GHz,
Core 2 Duo recommended
Windows Vista
XGA 1024 x 768
WXGA for notebooks
16-bit color depth
Windows XP
Windows Vista
Installation guide
System Manual, 06/2008, Printout of the Online Help
5
Installation
1.1 Installing WinCC flexible
System requirements
Hard disk
Free memory space
Operating system
Windows XP
Windows Vista
min. 2 GB with installation of a
language.
The memory requirement for each
additional language is 200 MB.
If WinCC flexible is not installed on the
system partition, the required memory
requirement will be distributed as
follows:
• approximately 700 MB to system
partition
• approximately 1.3 GB to installation
partition and 200 MB for each
additional language
Make allowances for additional free
hard disk space required for the page
file, for example. For further
information, refer to your Windows
documentation.
Internet browser
Microsoft Internet Explorer 6.0 SP1 or
higher
Windows XP
Windows Vista
To view documents in PDF format
Adobe Acrobat Reader 5.0 or higher
Visit the Adobe homepage at
"http://www.Adobe.com."
Windows XP
Windows Vista
The recommendations for WinCC flexible Engineering refer especially to the Engineering PC
on which WinCC flexible projects can be processed integrated in STEP 7.
Opening several instances of WinCC flexible on your Engineering PC at the same time may
result in more demanding hardware requirements.
When operating the configuration PC as access point to the process (Panel PC with WinCC
flexible Runtime) set all performance schemes to unlimited continuous operation.
Note
"Aero Glass Style" of Microsoft Vista
You need a powerful graphics card for "Aero Glass Style;" requirements are DirectX9
capability and a separate graphics memory of 128MB.
The performance power of the graphics system architecture can significantly influence the
performance power of WinCC flexible.
6
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
Note
Asian user interface languages
Installation of Asian language support in Windows is prerequisite for installing an Asian user
interface language for WinCC flexible.
Under Windows XP:
To do so, open the Control Panel and select "Regional and Language Options". On the
"Languages" tab, activate the check box "Install files for East Asian languages". Then click
on "Details" under "Text Services and Input Languages". The dialog "Text Services and Input
Languages" will open. On the "Settings" tab add the required default input language under
the "Installed Services".
Runtime behavior in Windows XP
Operating system Windows XP or higher provides a Data Execution Prevention (DEP)
function. Deactivate data execution prevention for a successful start of WinCC flexible and
WinCC flexible Runtime. You have the option to enter WinCC flexible and WinCC flexible
Runtime to an exception list. Check the settings by double-clicking the "System" entry in the
Control Panel of the operating system. The "System Properties" dialog opens. Select the
"Advanced" tab in the system properties and click "Settings" in the "Performance" section.
The "Performance Options" dialog box opens. Select the "Data Execution Prevention" tab.
The option "Turn on DEP for essential Windows programs and services only" is selected by
default and WinCC flexible or WinCC flexible Runtime can be started.
● "Data execution prevention for essential Windows programs and services only" enabled:
You can start WinCC flexible or WinCC flexible Runtime.
● "Enable data execution prevention for all programs and services with the exception of the
ones selected" enabled:
Enter WinCC flexible and WinCC flexible Runtime in the exception list.
Click the "Add" button and navigate to the WinCC flexible installation directory, e.g.
<C:\Program Files\Siemens\SIMATIC WinCC flexible\WinCC flexible 2008 Runtime>.
Select the "HmiES.exe" file and confirm your selection with "OK".
Repeat the same procedure for WinCC flexible Runtime. Navigate to the installation
folder of WinCC flexible Runtime, for example, <C:\Programs\Siemens\ SIMATIC
WinCC flexible\WinCC flexible 2008 Runtime>. Select the file "HmiRTm.exe" and confirm
your selection with "OK".
Close the dialog boxes and restart the station.
Note
You can also set the DEP options "AlwaysOn" or "AlwaysOff" in the Boot.ini of Windows.
The exception list is no longer valid if "AlwaysOn" is selected. This setting prevents the
start of WinCC flexible Runtime.
For additonal information on DEP, refer to the Windows help and the Microsoft homepage.
Installation guide
System Manual, 06/2008, Printout of the Online Help
7
Installation
1.1 Installing WinCC flexible
See also
Installation overview (Page 8)
Installing License Keys and options (Page 20)
Error-handling (Page 21)
Custom installation (Page 15)
1.1.2
Installation overview
Introduction
This document describes the installation with the full version of WinCC flexible 2008.
Requirements
● The requirements defined in the "System requirements" chapter must be met.
● Remove any previously installed versions of WinCC flexible including option packages
prior to starting a new installation. To locate all option packages, search all entries
starting with "SIMATIC WinCC flexible" under " Start > Settings > Control Panel >
Software."
Note
For WinCC flexible 2004 remove the software manually using the Control Panel.
As of WinCC flexible 2005 the product DVD will support you. If you remove previous
versions of WinCC flexible using the Setup.exe function on the DVD, the installation
directory will be retained. Backup files are generated as required in the installation
directory.
User rights required
You require administrator rights in order to install WinCC flexible and WinCC flexible
Runtime.
You require simple user rights to operate WinCC flexible and WinCC flexible Runtime under
Windows XP.
Select the WinCC flexible edition
During installation you do not differentiate between WinCC flexible Compact, Standard or
Advanced. Which edition of WinCC flexible you are operating depends on the license and,
with that, the installed license key.
You can migrate to a higher edition by installing the corresponding new license key.
WinCC flexible always starts with the license key of the highest edition if several license keys
are available. If necessary, uninstall the license key for the older edition.
If you wish to change to an earlier edition, install the license keys for the earlier edition. If
necessary, uninstall the license key for the higher edition.
8
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
Note
Requesting license keys from a license server
You cannot select the licensing scope of License Keys you requested from the license
server. You will be assigned the largest free license on the license server. You must
therefore ensure that the license server provide floating licenses of an appropriate size.
WinCC flexible starts without valid License Key if the requesting PC does not find a license.
Make sure that the Automation License Manager V4.0 is installed on the license server.
Licenses
WinCC flexible Engineering System requires a valid license. Each license is represented by
a license key. The license key is installed on the respective system. You can install the
license keys either immediately or later on.
Install any WinCC flexible options you have purchased separately. You must install the
associated license keys for each option.
For detailed information on licenses and license keys, refer to the "Licenses" chapter.
Use Automation License Manager to install the license keys.
Installation overview
Select in which scope you wish to install the components:
● Full installation
● Minimum installation
● Custom installation
You define which components are to be installed by running a custom setup.
Note
Separate installation of the Automation License Manager and WinCC flexible 2008
Restart the PC once installation of the Automation License Manager is complete. Make sure
that WinCC flexible 2008 can be installed without errors.
User interface language of WinCC flexible ES
You can select the dialog language of the configuration interface in any setup.
You can select the following languages:
● European:
– German
– English
– French
Installation guide
System Manual, 06/2008, Printout of the Online Help
9
Installation
1.1 Installing WinCC flexible
– Italian
– Spanish
● Asian:
– Chinese
– Taiwanese
– Japanese
– Korean
Note
WinCC flexible 2008 China
Chinese simplified is available in WinCC flexible 2008 China.
Security updates
WinCC flexible Setup installs any missing operating system components which are required.
After having installed WinCC flexible, run "Microsoft Windows Update" to check for new
security patches.
See also
System requirements (Page 5)
Installing License Keys and options (Page 20)
License Keys and Authorizations (Page 30)
Working with License Keys and Authorizations (Page 37)
1.1.3
Components
Components
WinCC flexible is a modular software package which contains the following components:
● WinCC flexible Engineering System
● WinCC flexible Integration:
Integrating WinCC flexible in STEP 7:
Configure and manage the SIMATIC visualization and automation components on a
shared platform. SIMATIC Manager of STEP 7 provides such a platform where certain
configuration tasks are automated.
Note
Integration in STEP 7 is only offered if STEP 7 has already been installed.
Integrating WinCC flexible in SIMOTION:
10
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
Configure and manage the SIMATIC visualization and SIMOTION automation
components using the central SIMOTION SCOUT platform. Certain configuration tasks
will be automated.
Note
Integration into SIMOTION is only offered if you have already installed SIMOTION.
● Migration:
The data of an existing ProTool project or components of a WinCC project are converted
to WinCC flexible.
Installation routines
Select one of the following setup routines when installing WinCC flexible:
● Minimum installation
● Full installation
● Custom installation
The table below lists lists the particular components and their corresponding installation
routine:
Minimum installation
Full installation
Custom installation
WinCC flexible
Yes
Yes
Yes
WinCC flexible
Integration in STEP 7
Yes
Yes
Configurable
WinCC flexible
Integration in SIMOTION
SCOUT
Yes
Yes
Configurable
Migration
No
Yes
Configurable
Libraries
• Graphics
• System libraries
No
Yes
Configurable
No
Yes
Configurable
Help system
Yes
Yes
Configurable
ProAgent
No
No
Configurable
For additional information pertaining to custom installations, refer to the chapter " Custom
installation ".
ProAgent
ProAgent is not installed or updated automatically when you run the WinCC flexible setup.
Remove any older version of ProAgent before you start installation.
Install ProAgent by taking the following actions:
● Start the setup of WinCC flexible.
● Select "Custom installation."
● Select "ProAgent".
Installation guide
System Manual, 06/2008, Printout of the Online Help
11
Installation
1.1 Installing WinCC flexible
Additional software components
You can add the following software components to your WinCC flexible Engineering System
installation:
● Support of "Save as version" (not available with Windows Vista OS)
The "Project" > "Save as version" menu command is used to save projects in the format
of previous WinCC flexible versions.
● Runtime/Simulation
Runtime components for executing the project on the HMI device / Simulation
components for simulating the project on the configuration computer.
● Automation License Manager
Automation License Manager is used to handle the license keys.
● OPC-XML gateway
The OPC gateway handles communication between DCOM and XML.
● Help files:
Microsoft HTML help files for calling the Online Help system.
User interface and project languages
The user interface language is the language in which the menus and dialogs of the
Engineering System are displayed. Set up the English user interface for English
configuration engineers. The English engineer can then configure a project for the French
language, for example. The project and its configured objects are displayed in French
language in runtime.
Optional GUI languages:
● Default: Setup language
● The user interface languages listed below are available for selection when installing
WinCC flexible CSA: German, English, French, Italian, Spanish, Japanese, Korean,
Chinese, Taiwanese
● WinCC flexible CHINA provides Chinese simplified as the user interface language.
See also
Custom installation (Page 15)
1.1.4
Execute a minimum installation or full installation
Requirement
● The conditions described in the "System requirements" chapter must be fulfilled.
● All applications are closed.
● Remove any previously installed versions of WinCC flexible including option packages
prior to starting a new installation.
12
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
Note
We recommend that you do not operate any applications using up resources during
installation of WinCC flexible, such as virus scanners.
Procedure
1. Insert the product DVD.
Setup starts automatically. If Setup does not start automatically, double-click the
"setup.exe" file in the directory CD_1 on the product DVD.
2. Select the setup language.
The dialog boxes are displayed in the setup language.
3. Open the product information in the next dialog box and read it carefully.
4. Read and accept the license agreement.
5. Select the user interface languages to be installed.
You can toggle the configuration interface between the selected languages.
Installation guide
System Manual, 06/2008, Printout of the Online Help
13
Installation
1.1 Installing WinCC flexible
6. Select "Full installation" to run the corresponding setup.
The status of each component is indicated by a small icon on its left side. You can view
additional information about these icons by clicking the "Help" button.
Note
Automation License Manager must be installed in order to be able to operate
WinCC flexible.
7. Select "Minimum installation" to run the corresponding setup.
14
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
8. Select additional components, if necessary.
9. Start the installation with "Next."
The WinCC flexible installation starts.
Note
Each setup phase takes several minutes. Installation of the compoment S7DOS may take
several minutes in rare cases. Do not interrupt setup in these cases.
The progress bar is not displayed in certain setup phases, for example, during
registration.
10.After setup was successfully completed, you are requested to transfer the license keys
for the installed components if corresponding license keys were not found on the PC.
Follow the instructions of the licensing dialogs and transfer the license keys from the
storage location to the hard disk drive of your PC. You can also run
Automation License Manager later to transfer the license keys.
11.Run WinCC flexible as described in the chapter "Startup" after having successfully
completed the installation.
1.1.5
Custom installation
Introduction
For the "Custom installation" you yourself establish which components are to be installed.
Requirement
● The conditions described in the "System requirements" chapter must be fulfilled.
Installation guide
System Manual, 06/2008, Printout of the Online Help
15
Installation
1.1 Installing WinCC flexible
● All applications are closed.
● Remove any previously installed versions of WinCC flexible including option packages
prior to starting a new installation.
Note
We recommend that you do not operate any applications using up resources during
installation of WinCC flexible, such as virus scanners.
Prepare for the installation procedure
1. Insert the product DVD.
Setup starts automatically. If Setup does not start automatically, double-click the
"setup.exe" file in the directory CD_1 on the product DVD.
2. Select the setup language.
The dialog boxes are displayed in the setup language.
3. Open the product information in the next dialog box and read it carefully.
4. Read and accept the license agreement.
5. Select the user interface languages to be installed.
You can toggle the configuration interface between the selected languages.
16
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
6. Select "Custom installation."
The status of each component is indicated by a small icon on its left side. You can view
additional information about these icons by clicking the "Help" button.
Note
Automation License Manager must be installed in order to be able to operate
WinCC flexible.
7. Select additional components, if necessary.
8. Select the required components.
Installation guide
System Manual, 06/2008, Printout of the Online Help
17
Installation
1.1 Installing WinCC flexible
Individual components require a license.
Note
The display of the dialog may take some time.
9. Start the installation with "Next."
The WinCC flexible installation starts.
Note
Each setup phase takes several minutes. Installation of the compoment S7DOS may take
several minutes in rare cases. Do not interrupt setup in these cases.
The progress bar is not displayed in certain setup phases, for example, during
registration.
10.After setup was successfully completed, you are requested to transfer the license keys
for the installed components if corresponding license keys were not found on the PC.
Follow the instructions of the licensing dialogs and transfer the license keys from the
storage location to the hard disk drive of your PC. You can also run
Automation License Manager at a later time to transfer the license keys.
11.After having successfully completed installation, run WinCC flexible as described in the
" Startup (Page 49) " chapter.
18
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
1.1.6
Antivirus tools
Approved antivirus tools
The following antivirus tools have been tested for compatibility with WinCC flexible 2008:
● McAfee Internet Security Suite 2008
● Trend Micro OfficeScan 8.0
● Symantec Norton Internet Security
These antivirus tool can usually be operated with default settings.
Integrated firewall of the antivirus tools
Authorize access to the following locations in the firewall in order to work without problems in
WinCC flexible:
● [installation folder WinCC flexible] \TraceServer.exe
● [installation folder WinCC flexible] \HMIES.exe
● [Installation directory of the Automation License Manager] almapp\almappx.exe
● %CommonProgramFiles%\Siemens\SWS\almsrv\almsrvx.exe
The use of a personal firewall can impair the functionality of WinCC flexible. We recommend
allowing access for WinCC flexible.
Note
Note that most antivirus software programs check all local drives of your computer after
setup. This check my take some time, depending on the volume of the file sytem to be
scanned. It is not advisable to run the WinCC flexible setup until this check has been
completed.
You should also observe the information of the supplier of your antivirus software.
High CPU utilization rate during communication though OPC-XML / HTTP
Communication is carried out through Port Address 80 that is checked by the firewall or
antivirus software respectively. This may result in a high utilization rate for the CPU.
Runtime settings for McAfee SecurityCenter
The following settings have been tested and released for WinCC flexible.
Select Custom installation" when carried out a new installation. Only install "VirusScan".
Carry out the following configurations for "VirusScan":
● Activate the virus protection
● Deactivate the spyware protection
● Deactivate the SystemGuard protection
● Deactivate the Scriptscan protection.
Installation guide
System Manual, 06/2008, Printout of the Online Help
19
Installation
1.1 Installing WinCC flexible
If you have already installed McAfee SecurityCenter, remove all the components with the
exception of VirusScan.
1.1.7
Installing License Keys and options
Introduction
With the purchase of a software package, you obtain a specific user license with an
associated license key.
Note
The license key is installed on the respective system. The license key enables a particular
part of the software to be used.
The usual procedure is to include the following License Keys when you install the software:
● For WinCC flexible Engineering System
● For WinCC flexible Runtime
● For options of WinCC flexible Engineering System
● For options of WinCC flexible Runtime
You can also install the License Keys separately at a later time.
Refer to the chapter "Licensing of HMI devices" for more information regarding licensing HMI
devices.
Note
Installing WinCC flexible options
To install ProAgent, you must select the "Custom installation" and highlight ProAgent. All
other options are either part of WinCC flexible, or are transferred alongside with ProSave.
The options are activated for use. Install an option separately by installing the corresponding
license key.
Requirements
● The storage location of the License Key is not write-protected and is ready.
● The drive on which you are installing a license key is local and not compressed.
NOTICE
License Keys are not installed on RAM drives, on floppy disks, or on compressed drives.
Read the description of Automation License Manager ("Start ► SIMATIC ►
Documentation".) Observe all warnings and notices.
Any installed trial licenses are time-limited.
20
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
Procedure
1. Close the WinCC flexible Engineering System and WinCC flexible Runtime.
2. To run Automation License Manager, select "Start ► SIMATIC ► License Management ►
Automation License Manager" in Windows.
3. Select the storage location for the License Keys as source drive from the left pane.
The License Keys or Authorizations available at the storage location are displayed on the
right pane.
4. Select one or several License Keys to install for the software type, options or Powerpack,
and then select "Transfer..." from the shortcut menu.
This opens the "Transfer License Key" dialog box.
5. Select the destination drive from the list, and then confirm your selection with "OK." The
selected License Keys are deleted from the storage location.
Upon authorization, in each case the counter at the storage location will be decremented
by 1. A placeholder remains at the storage location where the authorization can be
recorded again. The License Keys or Authorizations are installed on the destination drive
and are activated after the restart of WinCC flexible.
You can also drag-and-drop selected License Keys to the destination drive in the left
pane.
Authorizations
The previously used Authorizations were replaced by License Keys as of WinCC flexible
2005. Install the License Keys of WinCC flexible using Automation License Manager which is
included by default in the setup of WinCC flexible.
Note
Do not use the AuthorsW tool anymore.
See also
Working with License Keys and Authorizations (Page 37)
Non-licensed mode (Page 52)
System requirements (Page 5)
1.1.8
Error-handling
Possible errors during Setup and appropriate remedies
Installation guide
System Manual, 06/2008, Printout of the Online Help
21
Installation
1.1 Installing WinCC flexible
Error
Cause
Remedy
Procedure
The setup program does not start Autostart is
when you insert the product DVD disabled.
into the DVD drive.
Run setup manually.
Select the DVD drive containing the
product DVD, then double-click the
"setup.exe" file in the CD_1 directory.
Setup will be cancelled with an
error message.
Wrong Internet
Explorer
Make sure that
Microsoft Internet
Explorer Version 6.0
service pack 1 or higher
is installed.
Go online to www.microsoft.com to install
the latest version of Microsoft Internet
Explorer.
Setup is cancelled with error
message 1645 "Error Installing
Microsoft®.NET Framework,
Return Code 1601."
Wrong DCOM
configuration.
Check the DCOM
configuration.
1. Go to the Start menu of the operating
system and select the command
"Execute."
2. Enter "dcomcnfg.exe" and close the
dialog with the "OK" button.
3. In the "Standard properties" tab of the
"DCOM configuration properties" dialog
box, do NOT select "Default
authentication level" = " None" and
"Default identity change level" =
"Anonymous" at the same time.
Confirm the messages which are
output at short time intervals.
Missing
License Key.
Engineering System:
Install the License Key
for the relevant
engineering tool on your
engineering station.
Install the licenses for WinCC flexible or for
WinCC flexible Runtime with the
Automation License Manager.
Runtime: On the HMI
device, install the
License Keys for
Runtime and the
configured options.
Install authorizations separately with the
ProSave service tool.
Install License Keys on HMI devices with
the Automation License Manager.
The SQL server of WinCC V6 or
higher cannot be installed.
WinCC flexible
Start Center is
activated.
The SQL server of
WinCC V6 or higher can
only be installed if the
WinCC flexible start
center is deactivated.
To do so, right-click the
icon in the
Taskbar Notification Area, the Tray area of
the task bar. Click "SIMATIC WinCC
flexible Auto Start > Disable."
The SQL server of WinCC V6.2
or higher cannot be installed.
For example
due to
influences from
other SQL
instances.
You can install the SQL
server of WinCC V6.2
only when you have
removed the
WinCC flexible instance
of the Microsoft SQL
Server 2005 Express
Edition.
1. Remove the WinCC flexible instance of
the Microsoft SQL server.
Remove WinCC flexible and
components.
2. Install WinCC V6.2.
3. Run "setup.exe" from the
WinCC flexible product DVD. Carry out
the installation. Accept the conditions in
the license agreement. Do not change
the default setting in the other dialogs.
4. Restart the PC once installation is
complete.
22
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.1 Installing WinCC flexible
Error
Cause
Remedy
Procedure
The SQL server must carry out a
reinstallation.
For example
Run the reinstallation.
due to
influences from
other SQL
instances.
1. Insert the product DVD.
2. Run "setup.exe" from the CD_1
directory.
3. Carry out the installation. Accept the
conditions in the license agreement. Do
not change the default setting in the
other dialogs.
4. Restart the PC once installation is
complete.
A project is created or opened
with an error message.
The user data
Delete the folder with
of the Microsoft the user data.
SQL Server
2005 Express
Edition are
damaged.
1. Exit WinCC flexible 2008.
icon in the
2. To do so, right-click the
Taskbar Notification Area, the so-called
Tray area of the task bar. Click
"SIMATIC WinCC flexible Auto Start >
Exit."
3. Delete the following directory in
Windows Explorer:
"%USERPROFILE%\Local
Settings\Application
Data\Microsoft\Microsoft SQL Server
Data\WINCCFLEXEXPRESS"
Under Vista, delete the following
directory:
"%USERPROFILE%\AppData\Local\Mi
crosoft\Microsoft SQL Server
Data\WinCCFLEXEXPRESS"
A project is created or opened
with an error message.
The Microsoft
Install a Microsoft hotfix
SQL Server
for your operating
2005 Express
system.
Edition is
installed on a
Windows XP
SP2 based
computer. The
user is
attempting
remote access.
Connection
establishment
fails.
A corresponding hotfix is available from
Microsoft for this error: KB896613
http://support.microsoft.com/kb/896613/enus
Note
Remove WinCC flexible if installation failed, such as due to power failure. Start reinstallation
after removal.
If reinstallation fails, use the CleanupSupportTool and remove the installation residues.
For more information on WinCC flexible go to <http://support.automation.siemens.com>.
Installation guide
System Manual, 06/2008, Printout of the Online Help
23
Installation
1.2 Modifying the WinCC flexible installation
See also
System requirements (Page 5)
1.2
Modifying the WinCC flexible installation
Introduction
WinCC flexible is a modular software which consists of several components such as
Migration or GUI languages. These components can be installed or removed at a later time.
You can install additional software components such as Runtime/Simulation.
Requirement
● The conditions described in the "System requirements" chapter must be fulfilled.
● WinCC flexible has been installed.
Note
Make sure that Microsoft Internet Explorer Version 6.0 service pack 1 or higher is
installed. Otherwise, Setup of WinCC flexible will be cancelled with an error message.
Microsoft Internet Explorer Version 6.0 or SP 1 is available on the Microsoft homepage at
"http://www.microsoft.com."
Use Microsoft Windows Update to update your operating system. For information, refer to
the Microsoft Windows Help or to the Microsoft homepage.
Note
Post-installation requirements
If the basic installation is carried out via a network drive, then the original network drive
must be available for a reinstallation. In this situation, it is not possible to install further
components from the product DVD.
Note
We recommend that you do not operate any applications using up resources during
installation of WinCC flexible, such as virus scanners.
Procedure
1. Close all opened applications, particularly WinCC flexible Engineering System and
WinCC flexible Runtime.
2. Insert the WinCC flexible product DVD into the DVD drive. It is also possible to run Setup
from the network drive.
24
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.3 Options and Powerpack
3. If the autostart of Setup fails, double-click "setup.exe" on the DVD.
The WinCC flexible InstallShield Wizard opens.
4. Select the setup language.
The dialog boxes are displayed in the setup language.
5. Open the product information in the next dialog box and read it carefully.
6. Read and accept the license agreement.
7. Select the product languages that you wish to install.
Note
Select all GUI languages which should be installed, including already installed GUI
languages.
8. Select Installation routine.
9. Click "Next."
Installation is now started. The WinCC flexible InstallShield Wizard is displayed.
10.Set the "Modify program" option.
11.Click "Next."
12.The next dialog box shows the WinCC flexible components.
Check box set: Install components.
Check box cleared: Uninstall components.
13.Click the components to modify.
Note
If you enable a component, a description is displayed. This documentation is only
available if the corresponding component is installed.
14.Click "Next."
15.In the following dialog end the installation with "Finish."
Restart WinCC flexible to apply your changes.
1.3
Options and Powerpack
1.3.1
Available options
Introduction
Options are available for the following components:
● WinCC flexible Engineering System
Installation guide
System Manual, 06/2008, Printout of the Online Help
25
Installation
1.3 Options and Powerpack
● WinCC flexible Runtime on PC-based HMI devices
● Non-PC-based HMI devices
You can operate device-dependent runtime options on the HMI devices.
Each option requires a license.
Options for WinCC flexible Engineering System
Options available for the WinCC flexible Engineering System:
SIMATIC
WinCC flexible options
Function
Availability
WinCC flexible
/ChangeControl
Version management and modification
tracking
WinCC flexible Compact/
Standard/ Advanced
Options for WinCC flexible Runtime
The options depend on the target system used. The following options are available for
WinCC flexible Runtime on PC-based HMI devices or for non-PC-based HMI devices:
SIMATIC
WinCC flexible RT
options
Function
Non-PC-based HMI
devices
SIMATIC panel
PCs
WinCC flexible
/Archives
Archiving functionality in runtime
From Panel 270
x
WinCC flexible
/Recipes
Recipe functionality in runtime
Device-dependent
available; no
licensing necessary.
x
WinCC flexible
/[email protected]
Remote control and remote
monitoring as well as
communication between different
SIMATIC HMI systems.
From Panel 270
x
WinCC flexible
/[email protected]
Remote maintenance and servicing From Panel 270
of machines/plants via the
Internet/Intranet.
x
WinCC flexible /OPCServer
Use of an HMI device as OPC
server
Multi panel
x
WinCC flexible
/ProAgent
Process diagnostics during runtime
From Panel 270
x
WinCC flexible /Audit
Reporting interactions according to
FDA
From Panel 270
x
Note
The mutual use of the options [email protected] and [email protected] with the option Audit is not
enabled.
26
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.3 Options and Powerpack
Note
Installing the Audit Viewer
Audit Viewer is a comfortable tool for evaluating the audit trail of the WinCC flexible / Audit
option in preparation of an external analysis on an office PC.
To install Audit Viewer, start the setup.exe on the product DVD in the directory
CD_2/Support/Audit Viewer/Setup.
The Audit Viewer can only run on Windows XP.
1.3.2
Installing and uninstalling options
Introduction
Options are already included in WinCC flexible and are installed as standard.
To install ProAgent, you must select the "Custom installation" and highlight ProAgent.
You must enable all the necessary options for use.
Note
Each option requires a license. Enable an option by installing the corresponding License
Key.
Options for non-PC-based HMI devices
The necessary Runtime options are installed on the HMI device as follows:
● During the transfer of the project to the HMI device
Any options that are no longer required are uninstalled automatically.
● Alongside with ProSave
Procedure - enabling options
Activate an option by installing the corresponding License Key as described in the " Installing
licenses and options (Page 20)" section.
In order to backup the License Key of an option or use it on a different configuration PC or
HMI device you must remove this License Key.
NOTICE
If no valid license key is installed on an HMI device or on a PC with WinCC flexible
Runtime, runtime will run in a non-licensed mode.
Installation guide
System Manual, 06/2008, Printout of the Online Help
27
Installation
1.3 Options and Powerpack
Note
You can always purchase the license of an option and then install the license key at a later
date.
See also
Uninstalling License Keys and options (Page 46)
Available options (Page 25)
Non-licensed mode (Page 52)
1.3.3
Powerpack
Introduction
The following upgrades are possible with a powerpack:
● From a smaller to a larger edition of WinCC flexible Engineering System
● On a runtime system with greater quantity structure
A powerpack also includes a special license using which you can at any time enable a higher
level of WinCC flexible for use.
Engineering System
You have, for example, WinCC flexible Compact. Use the "SIMATIC WinCC flexible
Standard, Powerpack for WinCC flexible Compact" powerpack to activate WinCC
flexible Standard.
Runtime
You have, for example, WinCC flexible Runtime with 128 tags. Use the "SIMATIC
WinCC flexible Runtime, Powerpack 128 to 512 PowerTags" powerpack to enable WinCC
flexible Runtime with 512 tags for use.
Note
You can always purchase the license for a powerpack and then install the license key at a
later date. In doing so, the existing license key is deleted and replaced by a new license key.
See also
Scope of delivery (Page 75)
Installing a Powerpack (Page 29)
Installation overview (Page 8)
28
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.3 Options and Powerpack
1.3.4
Installing a Powerpack
Introduction
Install a powerpack by installing the corresponding license key. The powerpack license key
replaces the license key of an existing installation.
Note
You install the license key for a powerpack once. You cannot uninstall the license key for a
powerpack.
Requirements
● The conditions described in the "System requirements" chapter must be fulfilled.
● WinCC flexible has been installed.
● The license key for the license for which you have purchased a powerpack is installed.
Note
Make sure that Microsoft Internet Explorer Version 6.0 service pack 1 or higher is
installed. Otherwise, Setup of WinCC flexible will be cancelled with an error message.
Microsoft Internet Explorer Version 6.0 or SP 1 is available on the Microsoft homepage at
"http://www.microsoft.com."
Use Microsoft Windows Update to update your operating system. For information, refer to
the Microsoft Windows Help or to the Microsoft homepage.
If the basic installation is carried out via a network drive, then the original network drive
must be available for a reinstallation. It is not possible to install further components from
the product CD if you installed your basic software from a network drive.
Installing a powerpack
1. Install the powerpack license key you purchased as described in the chapter "Installing
license keys and options."
Result
The powerpack license key replaces the former license key. You cannot reverse this
process.
See also
Installing License Keys and options (Page 20)
Powerpack (Page 28)
Installation guide
System Manual, 06/2008, Printout of the Online Help
29
Installation
1.4 Licenses
1.4
Licenses
1.4.1
License Keys and Authorizations
Introduction
With the purchase of a software package, you obtain a specific user license with an
associated license key.
The license key is installed on the following devices:
● On the hard disk of a WinCC flexible configuration PC
● On the hard disk of a PC-based HMI device
A PC with WinCC flexible Runtime
● On a non-PC-based HMI Devices
The license key enables a particular part of the software to be used.
Authorizations were used instead of the new License keys in versions up to WinCC flexible
2004.
You can continue to use existing authorizations for WinCC flexible Runtime options and
powerpacks in many cases. Compared to authorizations, the License Keys are more
convenient and offer many new functions.
Note
You can also transfer License keys to different PCs on the network. For detailed information,
refer to Automation License Manager Online Help.
Note
If you want to retrofit an existing system, you can purchase an upgrade. The upgrade
replaces existing authorizations or License Keys with the new License Key.
CAUTION
If an authorization is being upgraded to a license key, the authorization is destroyed and a
license key is created. This effect is irreversible. The generated license key can no longer
be used as a license for previous versions of WinCC flexible.
See also
Scope of delivery (Page 75)
Installing License Keys and options (Page 20)
Working with License Keys and Authorizations (Page 37)
Automation License Manager (Page 40)
30
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.4 Licenses
Licensing of HMI devices (Page 36)
Licensing WinCC flexible Runtime on PC-based HMI devices (Page 35)
1.4.2
License types
The type of use for the software results from the certificate of license.
WinCC flexible Engineering System requires the following types of license:
● Floating license
● Trial license
WinCC flexible Runtime and options for runtime use the following types of license:
● Single license
Floating license
The floating license is the standard license for the WinCC flexible Engineering System.
The floating license is an unrestricted license (in terms of time), that you can install and use
locally or on any computer.
The floating license can also be purchased from a license server via the network. In doing
so, a license key is assigned by the license server when starting WinCC flexible. When
ending WinCC flexible the license key is then enabled once again.
The license size cannot be selected when obtained via the license server. The first free
license of the license server is allocated. You must therefore ensure that sufficient floating
licenses are available on the license server. If the requesting computer does not have a
sufficiently large license, WinCC flexible ES can only be operated at a lower edition.
If the floating license is purchased via the network, you must also note the following points:
● The Automation License Manager V4.0 must be installed on the license server.
● After a connection interruption, after three hours the non-licensed mode will be launched.
The floating license can be upgradeable.
Single license
All licenses for WinCC flexible Runtime and runtime options are single licenses.
The single license is an unrestricted standard license (in terms of time), that you can install
and use locally or on any computer.
The single license can be upgradeable.
Trial license
The trial license is a unique, restricted standard license (in terms of time), that you can install
and use locally or on any computer. The trial license expires after 14 days.
Installation guide
System Manual, 06/2008, Printout of the Online Help
31
Installation
1.4 Licenses
Upgrade license
You can execute, for example, the following with the upgrade license:
● Change from an old to a new version
Prerequisite is that the new version has been installed.
● Expand the quantity structure
Automation License Manager
Further information about handling the licenses can be found in the Automation License
Manager help.
The Automation License Manager shows the license type in the "Basic license types" field.
1.4.3
Licensing of WinCC flexible Engineering Systems
You require a license key for the following:
● WinCC flexible Engineering System, e.g. WinCC flexible Standard
● Options for WinCC flexible Engineering System
You can include the License Key during the setup of WinCC flexible.
The Automation License Manager administers the license keys.
Authorizations
Note
Up until WinCC flexible 2004, authorizations were required for licensing. Do no use the
AuthorsW. tool in versions as of WinCC flexible 2005.
32
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.4 Licenses
CAUTION
If an authorization is being upgraded to a license key, the authorization is destroyed and a
license key is created. This effect is irreversible. The generated license key can no longer
be used as a license for previous versions of WinCC flexible.
Starting without a valid license key
If you start WinCC flexible without a valid license, the system alerts you that you are working
in non-licensed mode. You have the one-time option of activating a trial license. The trial
license expires after 14 days.
If the trial license expires, the following scenarios can occur:
● WinCC flexible was never licensed on the PC in question.
– WinCC flexible cannot be started.
● WinCC flexible was already licensed on the PC in question.
– WinCC flexible cannot be started. Non-licensed mode is indicated every 10 minutes by
a window, which you must acknowledge.
To correct or avoid error
Install the license key for the respective license.
License type
A floating license is used for the WinCC flexible Engineering System.
1.4.4
Requesting License Keys from a license server
Note
You cannot select the licensing scope of License Keys you requested from the the license
server. You will be assigned the largest free license on the license server. You must
therefore ensure that the license server provide floating licenses of an appropriate size.
WinCC flexible starts without valid License Key if the requesting PC does not find a license.
Make sure that the Automation License Manager V4.0 is installed on the license server.
The system usually runs SIMATIC WinCC flexible Autostart after you startup the PC.
SIMATIC WinCC flexible Autostart performs the following actions after the PC startup:
● Immediate search for a free License Key
● Assignment of a License Key
Installation guide
System Manual, 06/2008, Printout of the Online Help
33
Installation
1.4 Licenses
However, the License Key on the license server cannot be used.
Possible problems
The request of a License Key from a license server may induce the following behavior, for
example:
The following situations may arise if one License Key is installed per Compact, Standard and
Advanced edition on the license server:
● The License Key is currently in use.
The License Key for WinCC flexible Advanced is available at the startup of the
Engineering PC. SIMATIC WinCC flexible Start Center sets the Advanced edition.
WinCC flexible is started on the engineering PC at a later time. The License Key for the
Advanced edition is being used in the meantime by a different engineering PC and is
therefore no longer available.
Result:
WinCC flexible Advanced edition starts without valid license.
● A free License Key is not assigned
The License Key for WinCC flexible Advanced is currently in use, and the License Key
forWinCC flexible Standard available at the startup of the engineering PC. The Standard
edition cannot be used to configure PC Runtime, for example.
SIMATIC WinCC flexible Start Center sets the Standard edition. WinCC flexible is started
on the engineering PC at a later time. However, although the License Key for the
Advanced edition has been released in the meantime, it has not been assigned.
Result:
The License Key for the Advanced edition is not going to be used although it is free.
Remedy
Take the following steps if the License Key for the required edition is not assigned:
1. Exit the WinCC flexible Engineering System.
2. Right-click the icon
in the task bar notification area.
3. Click on "SIMATIC WinCC flexible Auto Start > Disable".
A red dot in the icon indicates the deactivated state.
4. Right-click the icon
in the task bar notification area.
5. Click on "SIMATIC WinCC flexible Auto Start > Enable".
The red dot in the icon is cleared in activated state.
SIMATIC WinCC flexible Start Center searches for free License Keys on the license
server and assigns the highest free license.
6. Start the WinCC flexible Engineering System.
WinCC flexible starts with the license assigned to the corresponding edition.
34
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.4 Licenses
1.4.5
Licensing WinCC flexible Runtime on PC-based HMI devices
For PC-based HMI devices you require a license key for the following:
● WinCC flexible Runtime, e.g. with 128 tags
● WinCC flexible options
You can include the License Key during the setup of WinCC flexible.
The Automation License Manager administers the license keys and authorizations on PCbased HMI devices.
Note
Only the Certificate of License for WinCC flexible 2008 Runtime authorizes the use of
WinCC flexible 2008 Runtime.
The applicable new license is required to license WinCC flexible 2008 Runtime.
The Runtime licenses of WinCC flexible 2005 remain functional and can be used during the
course of the upgrade to WinCC flexible 2008.
Authorizations
Note
WinCC flexible 2004 or lower versions required authorizations for licensing. No longer use
the tool AuthorsW.
The Runtime authorizations of WinCC flexible 2004 remain functional and can be used in the
course of the upgrade to WinCC flexible 2008.
Non-licensed mode
WinCC flexible Runtime and the runtime options can be used without restrictions without a
valid license. Non-licensed mode is indicated every 10 minutes by a window, which you must
acknowledge.
Remedy
Install the license key for the respective license.
License types
A single license is used for WinCC flexible Runtime and runtime options.
See also
License Keys and Authorizations (Page 30)
Installation guide
System Manual, 06/2008, Printout of the Online Help
35
Installation
1.4 Licenses
1.4.6
Licensing of HMI devices
Non-PC-based HMI devices are always equipped with the maximum quantity structure. A
license key is not required for runtime operation.
A license is required for each option for non-PC-based HMI devices. The license key or the
authorization of the respective license enables in each case one option for use.
License key
To be able to license non-PC-based HMI devices with license keys you require the
"SIMATIC HMI License Manager Panel Plugin" add-on.
WinCC flexible setup installs this add-on as standard.
If WinCC flexible is not installed, an installation of ProSave 7.2 or higher is required.
Note
Further information about handling the licenses can be found in the Automation License
Manager help.
Note
License Keys are used a of version WinCC flexible 2005.
Verify that the current release of the operating system is installed on the HMI device before
you start licensing. If necessary, update the operating system using ProSave.
Authorizations
Alternatively, you can use existing authorizations of WinCC flexible 2004 options.
● 270 series
● 370 series
You can only use authorizations if the operating system version of WinCC flexible 2004 is
installed on the listed HMI devices. License Keys can be used on these HMI devices if
operating system version WinCC flexible 2005 or higher is installed.
The ProSave service tool is used to install authorizations on non-PC-based HMI devices.
Use License Keys to license the options on all other HMI devices.
NOTICE
The original authorization disks are needed for transferring authorizations on non-PC-based
HMI devices with ProSave.
Note
For the procedure and more information, consult the ProSave documentation.
36
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.4 Licenses
Data backup
CAUTION
Destruction of License Keys on non-PC-based HMI Devices
The authorizations and License Keys you installed are destroyed by back-up / restore
processes on the HMI devices listed below.
• 270 series
• 370 series
Carry out the following before beginning with restoring:
• Use the Automation License Manager and ProSave to check whether authorizations or
License Keys are installed on the HMI device.
• Remove any License Keys and authorizations present on the HMI device.
After restoring has been carried out, re-install the License Keys and authorizations on
the HMI device.
Non-licensed mode
In particular, runtime options can also be used without a license. Non-licensed mode is
indicated every 10 minutes by a window, which you must acknowledge.
Remedy
Install the license key for the respective license.
License types
A single license is used for runtime options.
Licensing of ThinClient
The authorization for Thin-Client continues to be used. You cannot transfer the authorization
using the Automation License Manager. Always use ProSave to transfer the authorization.
See also
License Keys and Authorizations (Page 30)
1.4.7
Working with License Keys and Authorizations
Introduction
You install a license key or authorization in the following cases:
● To use the WinCC flexible Engineering System
Installation guide
System Manual, 06/2008, Printout of the Online Help
37
Installation
1.4 Licenses
● To use options of the WinCC flexible Engineering System
● To use WinCC flexible Runtime
● To use options of WinCC flexible Runtime on PC-based HMI devices
● To use options on non-PC-based HMI Devices
You remove a License Key or an Authorization in the following situations:
● When backing up data
● If you no longer require the license
You can then use this license on another PC or HMI device.
When you install a license, the associated License Key is removed from the license key
storage location.
If you still have authorizations, you can also store these at license key storage location.
When you install an authorization, only the respective counter on the license key storage
location is decremented. A placeholder remains at the storage location to which you can
return the authorization.
CAUTION
The original authorization disks are needed for transferring authorizations on non-PC-based
HMI devices with ProSave.
Note
License Keys or authorizations cannot be copied. The utilized copy protection process
prevents copying of the license key and authorization disks.
Data backup
Remove the License Keys and authorizations from the HMI device when backing up data on
the HMI device and when creating a backup for replacing a device.
● For non-PC-based HMI devices, the authorization can be restored to the authorization
storage area using ProSave.
● You use the Automation License Manager to save license keys for non-PC-based HMI
devices at the storage area of the license key.
● You use the Automation License Manager to save license keys or authorizations for PCbased HMI devices at the storage area of the license key.
38
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.4 Licenses
CAUTION
Destruction of License Keys on non-PC-based HMI Devices
The License Keys and authorizations you installed are destroyed by back-up / restore
processes on the HMI devices listed below.
• 270 series
• 370 series
Start by removing all License Keys and authorizations from the HMI device, or exclude
these from the backup before you generate a backup copy of the data. This ensures that
you will not overwrite the licenses when you restore the backup copy.
Open ProSave and Automation License Manager tools in order to verify that no
authorizations or License Keys are installed on the device before you restore your data.
CAUTION
Destruction of License Keys on PCs
Start by removing all License Keys in the following situations:
• Before you format the hard disk
• Before you compress the hard disk
• Before you restore the hard disk
• Starting an optimization program that moves fixed blocks
• Installing a new operating system
Read the description of Automation License Manager ("Start ► Simatic ►
Documentation"). Observe all warnings and notices.
The License Key storage location on PC-based HMI devices and on non-PC-based HMI
devices where Automation License Manager is used may contain multiple License Keys.
Save all License Keys of the HMI device to the same storage location.
CAUTION
Always preserve the original storage location of the License Keys or the original
authorization disk.
Invalid license after time-zone change
The installed license no longer functions in the following case.
● If you change the time zone on a WinCC flexible PC as follows:
– From a time that refers to a complete hour to a time that does not refer to a complete
hour.
Example: You change the time zone from GMT +3:00 to GMT +3:30.
To avoid this inconvenience, remove the license key under the time zone setting that was set
when the license key was installed.
Example:
Installation guide
System Manual, 06/2008, Printout of the Online Help
39
Installation
1.4 Licenses
You have installed the license key with a time zone setting that refers to a full hour. Then
uninstall the license key also with a time zone setting that refers to a full hour.
This behavior does not apply to the trial license.
Defective License
A license is faulty in the following cases:
● If the License Key is no longer accessible at the storage area.
● If the License Key disappears during its transfer to the destination drive.
The Automation License Manager can be used to repair the defective license. Use the
"Restore" function or the "Restore wizard" of the Automation License Manager for this
purpose. Contact A&D Customer Support to restore the license.
Note
The runtime software can also be operated without errors if the license is missing or
defective. The system alerts you at short intervals that you are working in non-licensed
mode.
CAUTION
If you start WinCC flexible Engineering System without a valid license key, the system
alerts you that you are working in non-licensed mode. You have the one-time option of
activating a trial license. The trial license expires after 14 days.
If the trial license expires, the following scenarios can occur:
• WinCC flexible was never licensed on the PC in question.
WinCC flexible cannot be started.
• WinCC flexible was already licensed on the PC in question.
WinCC flexible cannot be started. Non-licensed mode is indicated every 10 minutes by a
window, which you must acknowledge.
See also
Installing License Keys and options (Page 20)
Uninstalling License Keys and options (Page 46)
License Keys and Authorizations (Page 30)
1.4.8
Automation License Manager
Introduction
Use Automation License Manager to install and remove License Keys separately. The
Automation License Manager is automatically included in the WinCC flexible set-up.
40
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.4 Licenses
When you initially install a License Key on a PC-based system, Automation
License Manager creates a folder named "AX NF ZZ" on a hard disk drive. This directory is
assigned the "System" and "Hidden" attributes and is automatically deleted when you
remove the last License Key.
CAUTION
Do not change the name or the attributes of this folder. Your installed License Keys will
otherwise be lost irrevocably.
Parameters
In addition to the installed License Keys, Automation License Manager also shows their
parameters.
The table below shows the parameters, and their meaning and use.
Parameters
Meaning
Status
Indicates the status of a License Key. The To check the status, select one or
most important states are:
several License Keys; then select
OK
"Check" from the shortcut menu.
inactive
corrupted
Family
Shows the product family associated with
a License Key.
Helps you to assign a License Key
when handling licenses for different
product families.
Product
Software type, option or powerpack
registered for use by the License Key.
Use this column as an orientation
when, for example, transferring the
License Key for an option.
Version
Specifies for which product version the
License Key is valid
A License Key can only be used for
the relevant valid product version.
Installation guide
System Manual, 06/2008, Printout of the Online Help
Application
41
Installation
1.4 Licenses
Parameters
Meaning
Application
Basic license
types
Shows the basic license type. The
following types are supported by WinCC
flexible:
• Floating
• Trial
• Single
License type
Shows more information about the license
type. The following types are supported
by WinCC flexible:
• Without restriction
• Trial (limited days)
Validity
Service life of the License Key
License number
The license number authorizes you to use When service is required, or a
the relevant product in accordance with
License Key has been lost, the
the "Certificate of License."
license number provides proof of your
purchase of the product and the
10 characters = Authorization;
associated authentication.
20 characters = License Key
Number of
License Keys
View of an available License Key on the
selected drive.
A separate entry will be generated for
each License Key. This entry will be
deleted when you transfer the License
Key.
View of a License Key.
Number of
Authorizations
Number of existing Authorizations on the
selected drive
0 = The Authorization is no longer
available on the selected drive.
1 = The Authorization is available on the
selected drive.
The Authorizations with counter value
"0" have already been transferred to a
different drive.
You can recognize the service life of
the trial license by the given
information.
See also
License Keys and Authorizations (Page 30)
Scope of delivery (Page 75)
42
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.5 Uninstalling WinCC flexible
1.5
Uninstalling WinCC flexible
1.5.1
Uninstalling WinCC flexible and components
Introduction
By uninstalling WinCC flexible, you also uninstall all components, but not the license keys.
Uninstall WinCC flexible
Requirement
● The conditions described in the "System requirements" chapter must be fulfilled.
● WinCC flexible has been installed.
Procedure
1. Close all opened applications, particularly WinCC flexible Engineering System and
WinCC flexible Runtime.
2. Disable the WinCC flexible Start Center.
You can find more notes on WinCC flexible Start Center in the "WinCC flexible Start
Center" chapter.
3. Select "Start > Settings > Control Panel" to open the Control Panel.
4. Double-click "Software" on the Control Panel.
This opens the "Software" dialog box.
5. From this dialog box, select "SIMATIC WinCC flexible 2008."
The "Modify" and "Remove" buttons appear.
6. Click "Remove".
The WinCC flexible InstallShield Wizard opens.
7. Activate the "Remove program" option and then click "Next".
8. Confirm the removal with "OK".
WinCC flexible is removed from the configuration PC.
9. On the next dialog box, click "Finish" to close the uninstall dialog.
Result
WinCC flexible has been removed.
Installation guide
System Manual, 06/2008, Printout of the Online Help
43
Installation
1.5 Uninstalling WinCC flexible
Removing WinCC flexible 2008 Runtime
1. Close all open applications, in particular WinCC flexible Runtime.
2. Select "Start > Settings > Control Panel" to open the Control Panel.
3. Double-click "Software" on the Control Panel.
This opens the "Software" dialog box.
4. Select "SIMATIC WinCC flexible 2008 Runtime" from this dialog box.
The "Modify" and "Remove" buttons appear.
5. Click "Remove".
The WinCC flexible InstallShield Wizard opens.
6. Activate the "Remove program" option and then click "Next".
7. Confirm the removal with "OK".
WinCC flexible Runtime is removed from the Runtime PC.
8. On the next dialog box, click "Finish" to close the uninstall dialog.
Integrated installation
If WinCC flexible is integrated in SIMATIC STEP 7 and/or SIMOTION SCOUT, always
uninstall in the order outlined below. In the first step, uninstall WinCC flexible. Next, uninstall
SIMATIC STEP 7 and /or SIMOTION SCOUT.
ProTool
You should reinstall ProTool if the removal of WinCC flexible has a negative impact on
ProTool functions, such as preventing you from opening screens.
User dictionary
The uninstall routine also deletes the user dictionaries. If you still require the data you should
create a backup copy of the user dictionaries prior to uninstalling.
1. Search for the "UserDictionary.ldf" file in the "C:\Documents and Settings\All
Users\Application Data\Siemens AG" folder.
Note
The following storage location is used in Windows Vista:
"C: \ProgramData\Siemens AG\WinCC flexible"
2. Copy the "UserDictionary.dct" and "UserDictionary_log.LDF" files.
Microsoft SQL Server 2005 Express Edition
During removal of WinCC flexible, the WinCC flexible instance of the Microsoft SQL Server
will not be removed automatically.
44
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.5 Uninstalling WinCC flexible
1. Select "Start > Settings > Control Panel" to open the Control Panel.
2. Double-click "Software" on the Control Panel.
This opens the "Software" dialog box.
3. In the "Software" dialog box, select "Microsoft SQL Server 2005."
The "Modify" and "Remove" buttons appear.
4. Click "Remove".
The "Microsoft SQL Server 2005 Uninstall Dialog" will open.
5. Select the entry WINCCFLEXEXPRESS: Database Engine in the "Microsoft SQL Server
2005 Uninstall" dialog.
6. Click "Next."
7. Confirm the removal with "OK".
The WinCC flexible instance of the Microsoft SQL Server will be removed from the
configuration PC.
8. On the next dialog box, click "Finish" to close the uninstall dialog.
Note
You have removed the WinCC flexible instance of the Microsoft SQL Server. Select "Start
> Settings > Control Panel" to remove the Microsoft SQL Server after having confirmed
that it is not used by any other program.
For more information on Microsoft SQL Server 2005 Express Edition go to the FAQ section
at <http://support.automation.siemens.com>. Enter the ID "29420407" in the search.
Microsoft SQL Server Desktop Engine (MSDE)
During removal of WinCC flexible, the WinCC flexible instance of the Microsoft SQL Server
will not be removed automatically.
1. Select "Start > Settings > Control Panel" to open the Control Panel.
2. Double-click "Software" on the Control Panel.
This opens the "Software" dialog box.
3. In the "Software" dialog box, select "Microsoft SQL Server Desktop Engine
(WinCCflexible)."
The "Remove" button appears.
4. Click "Remove".
5. Confirm the removal with "OK".
The WinCC flexible instance of the Microsoft SQL Server will be removed from the
configuration PC.
See also
Uninstalling License Keys and options (Page 46)
Installation guide
System Manual, 06/2008, Printout of the Online Help
45
Installation
1.5 Uninstalling WinCC flexible
1.5.2
Uninstalling License Keys and options
Introduction
After uninstalling WinCC flexible you then uninstall the licenses separately using Automation
License Manager. You must uninstall the license key for the following components:
● Engineering software
● Runtime software
● Options
Uninstall licenses from the HMI using ProSave or Automation License Manager.
You uninstall an option separately by uninstalling the corresponding license key.
Requirement
● The storage location of the license key is not write-protected and is ready.
● The drive from which you uninstall the licenses is local and not compressed.
● WinCC flexible Auto Start has been completed.
CAUTION
Read the description of Automation License Manager ("Start ► Simatic ►
Documentation"). Observe all warnings and notices.
Procedure
1. Close WinCC flexible Engineering System and WinCC flexible Runtime.
2. To run Automation License Manager, select "Start ► Simatic ► License Management ►
Automation License Manager" in Windows.
The Automation License Manager is included in the WinCC flexible set-up as standard.
3. From the left pane, select the drive which contains the license.
All License Keys or Authorizations available on this drive are shown on the right pane.
4. Select the License Keys or Authorizations to be removed and then select "Transfer..."
from the shortcut menu.
This opens the "Transfer License Key" dialog box.
5. Select the storage location from the list, and then confirm your selection with "OK." The
selected License Keys are transferred to the storage location. The counter of each
authorization will increment by the count of one.
You can also drag-and-drop selected License Keys to the destination drive in the left
pane.
Note
You may use an uninstalled license on a different HMI. You can also transfer licenses
from one PC-based HMI device to another over a network. For detailed information, refer
to Automation License Manager Online Help.
46
Installation guide
System Manual, 06/2008, Printout of the Online Help
Installation
1.5 Uninstalling WinCC flexible
See also
Working with License Keys and Authorizations (Page 37)
Non-licensed mode (Page 52)
Uninstalling WinCC flexible and components (Page 43)
Installation guide
System Manual, 06/2008, Printout of the Online Help
47
Installation
1.5 Uninstalling WinCC flexible
48
Installation guide
System Manual, 06/2008, Printout of the Online Help
2
Startup
2.1
Overview
New entries in the Windows Start menu
WinCC flexible Setup adds new entries to the Start menu of the operating system under
"Simatic."
● The configuration software can be found under the following entry:
"Start> Simatic > WinCC flexible 2008 > WinCC flexible"
● The process visualization software can be found under the following entry:
"Start > Simatic > WinCC flexible 2008 Runtime > WinCC flexible Runtime"
● The administration program for license keys and authorizations can be found under the
following entry:
"Start > SIMATIC > License Management > Automation License Manager".
● The online help can be found under the following entry:
"Start> Simatic > WinCC flexible 2008 > WinCC flexible help system"
In Windows Vista, the entries will be available at "Start > Programs > Siemens Automation >
SIMATIC."
Start the Engineering System and create a project. Set the required user interface language
in the Engineering System. Transfer the project to the HMI and then start runtime on the
HMI.
Missing Start menu entries after installation
The following Start menu entries may not be displayed for certain operating system
languages (not standard languages) after installation of WinCC flexible.
● ProSave
● WinCC flexible 2008 Runtime Simulator
● - Installed software
Create a link or start the programs manually.
Path information:
● ProSave: Shared files of the SIMATIC applications \Common
Files\PTProsave\PTProSave.exe
● Runtime Simulator: Shared files of the SIMATIC applications
\HmiRTmSim\HmiRTmSim.exe
Installation guide
System Manual, 06/2008, Printout of the Online Help
49
Startup
2.2 Run WinCC flexible
● - Installed software: Shared files of the SIMATIC applications \S7AVERSX\s7aversx.exe
In English language operating systems, the "Shared files of SIMATIC applications" are
usually located in the folder:
C:\Program Files\Common Files\Siemens
See also
Run WinCC flexible (Page 50)
changing the user interface language in the ES (Page 53)
Scope of delivery (Page 75)
2.2
Run WinCC flexible
2.2.1
Run WinCC flexible
Introduction
Run the WinCC flexible Engineering System by selecting it from the Start menu of your
operating system.
Procedure
1. In the "Start" menu, select the "Simatic > WinCC flexible 2008 > WinCC flexible"
command.
2. Use the project wizard to create a new project, or create it directly without using the
project wizard. The project wizard walks you through the vital steps in configuring by
offering various default settings which you can modify.
Configure the screens and screen objects in the project. Compile your project, test or
simulate it, and then transfer the tested project to the HMI device.
Note
You need write permissions for the folders listed below during the initial start of WinCC
flexible:
• "Documents and Settings\All Users\Application data\Siemens AG\SIMATIC WinCC
flexible" and "Documents and Settings\All Users\Application data\Siemens AG\SIMATIC
WinCC flexible 2008\Caches."
• Under Windows Vista: "Program Data\Siemens AG\SIMATIC WinCC flexible" and
"Program Data\Siemens AG\SIMATIC WinCC flexible 2008\Caches"
The system generates template files in these folders during initial startup in the current
WinCC flexible GUI language. You also require write permissions when you initially set up a
new GUI language for a project.
50
Installation guide
System Manual, 06/2008, Printout of the Online Help
Startup
2.2 Run WinCC flexible
Note
At its start, WinCC flexible outputs an error message if it cannot find Automation License
Manager or your installation is corrupted. This also cancels the start of WinCC flexible.
Uninstall Automation License Manager, and then reinstall it. You can find the setup for the
installation on the WinCC flexible DVD in the directory CD2 under
"Automation License Manager\Setup".
Note
If instead of an internet connection, a network connection is configured for a user,
WinCC flexible may be very slow the first time you start it.
Make sure you have an Internet connection before the first start. Alternatively, you can
disable the "Check for publisher's certificate revocation" option in Internet Explorer. The
setting is in the Control Panel under Internet Options > Advanced > Security".
See also
Overview (Page 49)
Starting WinCC flexible Runtime (Page 51)
Non-licensed mode (Page 52)
2.2.2
Starting WinCC flexible Runtime
Introduction
As a general rule, you run WinCC flexible Runtime on the HMI. You may also start Runtime
in a project you opened in the Engineering System.
Procedure
For closer details, refer to the chapter "Introducing WinCC flexible Runtime"
Installation guide
System Manual, 06/2008, Printout of the Online Help
51
Startup
2.2 Run WinCC flexible
Note
If WinCC flexible is running on a PC, in the following cases an error message appears when
you start WinCC flexible Runtime:
• The Automation License Manager is not installed.
• The Automation License Manager installation is damaged.
During operation in Runtime, the system outputs a message at intervals of 10 minutes; you
need to acknowledge those messages. Uninstall Automation License Manager, and then
reinstall it. You can find the setup for the installation on the WinCC flexible DVD in the
directory CD2 under "Automation License Manager\Setup".
See also
Run WinCC flexible (Page 50)
2.2.3
Non-licensed mode
Introduction
WinCC flexible runs in non-licensed mode if the license key is not installed.
Engineering System
If you start WinCC flexible without a valid license, the system alerts you that you are working
in non-licensed mode. You have the one-time option of activating a trial license. The trial
license expires after 14 days.
If the trial license expires, the following scenarios can occur:
● WinCC flexible was never licensed on the PC in question.
– WinCC flexible cannot be started.
● WinCC flexible was already licensed on the PC in question.
– WinCC flexible cannot be started. Non-licensed mode is indicated every 10 minutes by
a window, which you must acknowledge.
Runtime
WinCC flexible Runtime and the runtime options can be used without restrictions in the nonlicensed mode. Non-licensed mode is indicated every 10 minutes by a window, which you
must acknowledge.
To correct or avoid error
Install the license key for the respective license.
52
Installation guide
System Manual, 06/2008, Printout of the Online Help
Startup
2.2 Run WinCC flexible
See also
Available options (Page 25)
Run WinCC flexible (Page 50)
2.2.4
changing the user interface language in the ES
Introduction
Set the menu and dialog language of your ES user interface. You can set up the user
interface, for example, for English-speaking engineers.
Requirement
WinCC flexible set-up has installed the relevant user interface language.
Procedure
1. Select "Settings" from the "Options" menu.
The "Settings" dialog box is opened.
2. Click "User interface language " in the "Workbench" group.
3. In "Language", select your user interface language.
4. Confirm your entries.
The dialog box closes.
Result
The user interface language changes to the selected language.
Note
If you change the user interface language, when you set up the first project in this language
you will require write rights to the directories:
• "Documents and Settings\All Users\Application data\Siemens AG\SIMATIC WinCC
flexible" and "Documents and Settings\All Users\Application data\Siemens AG\SIMATIC
WinCC flexible 2008\Caches."
• Under Windows Vista: "Program Data\Siemens AG\SIMATIC WinCC flexible" and
"Program Data\Siemens AG\SIMATIC WinCC flexible 2008\Caches"
The system generates template files in these folders during initial startup in the current
WinCC flexible GUI language. You also require write permissions when you initially set up a
new GUI language for a project.
Installation guide
System Manual, 06/2008, Printout of the Online Help
53
Startup
2.2 Run WinCC flexible
See also
Overview (Page 49)
54
Installation guide
System Manual, 06/2008, Printout of the Online Help
Startup
2.2 Run WinCC flexible
Installation guide
System Manual, 06/2008, Printout of the Online Help
55
Licenses and Open Source Software
3.1
3
Open source software used in this product
Copyright Notices
Name
Copyright
Owner of License
TigthVNC
Copyright ©
1999 AT&T Laboratories Cambridge. All Rights Reserved.
RCS
Copyright ©
1982, 1988, 1989 Walter Tichy
1990, 1991, 1992, 1993, 1994, 1995 Paul Eggert
Distributed under license by the Free Software Foundation,
Inc.
Xerxes
Copyright ©
Under Apache Software License, Version 1.1
OpenSSL
Copyright ©
1995-1997 Eric Young ([email protected])
GoldParser
Copyright ©
Under GOLD Parser Freeware License Agreement
MMC Library V1.5
Copyright ©
Under Common Public License
zlib
Copyright ©
1995-2002 Jean-loup Gailly
#ziplib
Copyright ©
2001 Mike Krueger
libjpeg
Copyright ©
1991-1998 Thomas G. Lane
Single files of libjpeg
package
Copyright ©
Various authors including:
Info ZIP
Copyright ©
1990-2005 Info-Zip
AOSVS
Copyright ©
1990 US&T, Inc.
ATHEOS
Copyright ©
1997 Chris Herborth ([email protected]) - BeOS port
Gordon Matzigkeit, Jef Poskanzer, Per Bothner, Ge'
Weijers, Lee Daniel Crocker, Mike Lijewski, Robert
Hutchinson, Sam Bushell, Dan Gildor, James Arthur
Boucher, David Rowley, Spencer W. Thomas et al
2004 Ruslan Nickolaev ([email protected]) - AtheOS port
REXX
Copyright ©
1994 Scott Maxwell
1996 Scott Field
1992-1998 Apple Computer, Inc
1998 Jim Luther
1995-2005 Jean-loup Gailly, Brian Raiter and Gilles Vollant
Installation guide
System Manual, 06/2008, Printout of the Online Help
57
Licenses and Open Source Software
3.1 Open source software used in this product
License Conditions and Disclaimers for Free Software
The Software "WinCC flexible" (hereinafter referred to as "Software") contains the free
software listed below in unmodified or modified form (hereinafter referred to as "Free
Software"):
Name
License
TigthVNC
GNU GPL
RCS
GNU GPL
Xerxes
Apache License
OpenSSL
OpenSSL License
GoldParser
GoldParser license
MMC Library V1.5
Common Public License
zlib
zlib license
#ziplib
GNU GPL
libjpeg
libjpeg Package License
Info ZIP
Info-ZIP license
A collection of original license texts is available in a pdf file in the folder
"support\Open Source" on the WinCC flexible CD.
The Free Software is provided free of charge. You are entitled to use the Free Software in
accordance with the respective license conditions (OSS License Conditions) listed below. If
there are discrepancies between the OSS License Conditions and the license conditions of
the Software as per clauses 2 and 3 above, the OSS License Conditions shall prevail. In
case of an infringement or breach of such OSS License Conditions the respective licensor
named in such OSS License Conditions is entitled - in addition to ourselves - to bring forward
and enforce the respective claims resulting from such infringement or breach in its own
name.
Insofar as the applicable OSS License Conditions provide for it, you can order the source
code of the Free Software from your Siemens sales contact - against payment of the
shipping and handling charges - for a period of at least 3 years since purchase of the
Software.
Liability for Free Software
We are liable for the Software including the Free Software contained in it in accordance with
the license conditions applicable to the Software. Any liability for the Free Software beyond
the program flow intended for the Software is explicitly excluded. Furthermore, any liability
for defects resulting from modifications to the Free Software by you or third parties is
excluded.
We do not provide any technical support for the Software if it has been modified.
Note
PLEASE READ THE BELOW LICENSE CONDITIONS CAREFULLY BEFORE USING THE
SOFTWARE. THE ACCEPTANCE OF ANY DISCLAIMER OF WARRANTY OR LIABILITY
CONTAINED IN SUCH LICENSE CONDITIONS IS A STRICT PRECONDITION FOR THE
USE OF THE FREE SOFTWARE.
58
Installation guide
System Manual, 06/2008, Printout of the Online Help
Licenses and Open Source Software
3.2 License text of the GNU General Public License
3.2
License text of the GNU General Public License
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change
it. By contrast, the GNU General Public License is intended to guarantee your freedom to
share and change free software--to ensure the software is free for all its users. This General
Public License applies to most of the Free Software Foundation's software and to any other
program whose authors commit to using it. (Some other Free Software Foundation software
is covered by the GNU Library General Public License instead.) You can apply it to your
programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish), that you receive source code or can get it if
you want it, that you can change the software or use pieces of it in new free programs; and
that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these
rights or to ask you to surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must
give the recipients all the rights that you have. You must make sure that they, too, receive or
can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this
license which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified by
someone else and passed on, we want its recipients to know that what they have is not the
original, so that any problems introduced by others will not reflect on the original authors'
reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the
danger that redistributors of a free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have made it clear that any patent must
be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
Terms and conditions for copying, distribution and modification
1. This License applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General Public
Installation guide
System Manual, 06/2008, Printout of the Online Help
59
Licenses and Open Source Software
3.2 License text of the GNU General Public License
License. The "Program", below, refers to any such program or work, and a "work based
on the Program" means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it, either verbatim or with
modifications and/or translated into another language. (Hereinafter, translation is included
without limitation in the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this
License; they are outside its scope. The act of running the Program is not restricted, and
the output from the Program is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program). Whether that is
true depends on what the Program does.
2. You may copy and distribute verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and appropriately publish on
each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your
option offer warranty protection in exchange for a fee.
3. You may modify your copy or copies of the Program or any portion of it, thus forming a
work based on the Program, and copy and distribute such modifications or work under
the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed
the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part
contains or is derived from the Program or any part thereof, to be licensed as a whole at
no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must
cause it, when started running for such interactive use in the most ordinary way, to print
or display an announcement including an appropriate copyright notice and a notice that
there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy
of this License. (Exception: if the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not required to print an
announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Program, and can be reasonably considered independent
and separate works in themselves, then this License, and its terms, does not apply to
those sections when you distribute them as separate works. But when you distribute the
same sections as part of a whole which is a work based on the Program, the distribution
of the whole must be on the terms of this License, whose permissions for other licensees
extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of
derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the
Program (or with a work based on the Program) on a volume of a storage or distribution
medium does not bring the other work under the scope of this License.
4. You may copy and distribute the Program (or a work based on it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that
you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which
must be distributed under the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party,
for a charge no more than your cost of physically performing source distribution, a
60
Installation guide
System Manual, 06/2008, Printout of the Online Help
Licenses and Open Source Software
3.2 License text of the GNU General Public License
complete machine-readable copy of the corresponding source code, to be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to distribute
corresponding source code. (This alternative is allowed only for noncommercial
distribution and only if you received the program in object code or executable form with
such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means all the source
code for all modules it contains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include anything that is normally
distributed (in either source or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code from the same
place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
5. You may not copy, modify, sublicense, or distribute the Program except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense or
distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this
License will not have their licenses terminated so long as such parties remain in full
compliance.
6. You are not required to accept this License, since you have not signed it. However,
nothing else grants you permission to modify or distribute the Program or its derivative
works. These actions are prohibited by law if you do not accept this License. Therefore,
by modifying or distributing the Program (or any work based on the Program), you
indicate your acceptance of this License to do so, and all its terms and conditions for
copying, distributing or modifying the Program or works based on it.
7. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
8. If, as a consequence of a court judgment or allegation of patent infringement or for any
other reason (not limited to patent issues), conditions are imposed on you (whether by
court order, agreement or otherwise) that contradict the conditions of this License, they
do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the Program at all. For
example, if a patent license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then the only way you
could satisfy both it and this License would be to refrain entirely from distribution of the
Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a whole
is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property
right claims or to contest validity of any such claims; this section has the sole purpose of
protecting the integrity of the free software distribution system, which is implemented by
public license practices. Many people have made generous contributions to the wide
Installation guide
System Manual, 06/2008, Printout of the Online Help
61
Licenses and Open Source Software
3.2 License text of the GNU General Public License
range of software distributed through that system in reliance on consistent application of
that system; it is up to the author/donor to decide if he or she is willing to distribute
software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence
of the rest of this License.
9. If the distribution and/or use of the Program is restricted in certain countries either by
patents or by copyrighted interfaces, the original copyright holder who places the
Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not
thus excluded. In such case, this License incorporates the limitation as if written in the
body of this License.
10.The Free Software Foundation may publish revised and/or new versions of the General
Public License from time to time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version
number of this License which applies to it and "any later version", you have the option of
following the terms and conditions either of that version or of any later version published
by the Free Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
11.If you wish to incorporate parts of the Program into other free programs whose
distribution conditions are different, write to the author to ask for permission. For software
which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the
two goals of preserving the free status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
12.NO WARRANTY
13.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
14.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
62
Installation guide
System Manual, 06/2008, Printout of the Online Help
Licenses and Open Source Software
3.2 License text of the GNU General Public License
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the
public, the best way to achieve this is to make it free software which everyone can
redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of
each source file to most effectively convey the exclusion of warranty; and each file should
have at least the "copyright" line and a pointer to where the full notice is found.
● <one line to give the program's name and a brief idea of what it does.> Copyright (C)
<year> <name of author>
● This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
● This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
● You should have received a copy of the GNU General Public License along with this
program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330,
Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an
interactive mode:
● Gnomovision version 69, Copyright (C) year name of author
● Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
● This is free software, and you are welcome to redistribute it under certain conditions; type
`show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the
General Public License. Of course, the commands you use may be called something other
than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits
your program.
You should also get your employer (if you work as a programmer) or your school, if any, to
sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the
names:
● Yoyodyne, Inc., hereby disclaims all copyright interest in the program
● `Gnomovision' (which makes passes at compilers) written by James Hacker.
● <signature of Ty Coon>, 1 April 1989
● Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary
programs. If your program is a subroutine library, you may consider it more useful to permit
linking proprietary applications with the library. If this is what you want to do, use the GNU
Lesser General Public License instead of this License.
Installation guide
System Manual, 06/2008, Printout of the Online Help
63
Licenses and Open Source Software
3.3 License text of the Apache Software License, Version 1.1
3.3
License text of the Apache Software License, Version 1.1
The Apache Software License, Version 1.1
Copyright (c) 2001 The Apache Software Foundation. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. The end-user documentation included with the redistribution, if any, must include the
following acknowledgment: "This product includes software developed by the Apache
Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may
appear in the software itself, if and wherever such third-party acknowledgments normally
appear.
4. The names "Apache", "Jakarta", "JAMES" and "Apache Software Foundation" must not
be used to endorse or promote products derived from this software without prior written
permission. For written permission, please contact [email protected]
5. Products derived from this software may not be called "Apache", nor may "Apache"
appear in their name, without prior written permission of the Apache Software
Foundation.
THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This software consists of voluntary contributions made by many individuals on behalf of the
Apache Software Foundation. For more information on the Apache Software Foundation,
please see <http://www.apache.org/>.
Portions of this software are based upon public domain software originally written at the
National Center for Supercomputing Applications, University of Illinois, Urbana-Champaign.
3.4
License text of the OpenSSL license
License
This is a copy of the current LICENSE file inside the CVS repository.
64
Installation guide
System Manual, 06/2008, Printout of the Online Help
Licenses and Open Source Software
3.4 License text of the OpenSSL license
License Issues
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL
License and the original SSLeay license apply to the toolkit. See below for the actual license
texts. Actually both licenses are BSD-style Open Source licenses. In case of any license
issues related to OpenSSL please contact [email protected]
OpenSSL License
Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the
following acknowledgment: "This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or
promote products derived from this software without prior written permission. For written
permission, please contact [email protected]
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL"
appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This
product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young ([email protected]).
This product includes software written by Tim Hudson ([email protected]).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL.
Installation guide
System Manual, 06/2008, Printout of the Online Help
65
Licenses and Open Source Software
3.5 License text of the Gold Parser license
This library is free for commercial and non-commercial use as long as the following
conditions are adhered to. The following conditions apply to all code found in this distribution,
be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation
included with this distribution is covered by the same copyright terms except that the holder
is Tim Hudson ([email protected]). Copyright remains Eric Young's, and as such any
Copyright notices in the code are not to be removed.
If this package is used in a product, Eric Young should be given attribution as the author of
the parts of the library used. This can be in the form of a textual message at program startup
or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and
the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the
following acknowledgement: "This product includes cryptographic software written by Eric
Young ([email protected])" The word 'cryptographic' can be left out if the routines from
the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory
(application code) you must include an acknowledgement: "This product includes
software written by Tim Hudson ([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this
code cannot be changed. i.e. this code cannot simply be copied and put under another
distribution licence [including the GNU Public Licence.]
3.5
License text of the Gold Parser license
The GOLD Parser Freeware License Agreement
This software is provided 'as-is', without any expressed or implied warranty. In no event will
the author(s) be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose. If you use this
software in a product, an acknowledgment in the product documentation would be deeply
appreciated but is not required.
66
Installation guide
System Manual, 06/2008, Printout of the Online Help
Licenses and Open Source Software
3.6 License text of the Common Public license
In the case of the GOLD Parser Engine source code, permission is granted to anyone to
alter it and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote
the original software.
2. Altered source versions must be plainly marked as such, and must not be misrepresented
as being the original software.
3. This notice may not be removed or altered from any source distribution.
3.6
License text of the Common Public license
Common Public License Version 1.0
THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS
COMMON PUBLIC LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR
DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE OF
THIS AGREEMENT.
1. DEFINITIONS
"Contribution" means:
a) in the case of the initial Contributor, the initial code and documentation distributed under
this Agreement, and
b) in the case of each subsequent Contributor:
i) changes to the Program, and
ii) additions to the Program;
where such changes and/or additions to the Program originate from and are distributed by
that particular Contributor. A Contribution 'originates' from a Contributor if it was added to the
Program by such Contributor itself or anyone acting on such Contributor's behalf.
Contributions do not include additions to the Program which: (i) are separate modules of
software distributed in conjunction with the Program under their own license agreement, and
(ii) are not derivative works of the Program.
"Contributor" means any person or entity that distributes the Program.
"Licensed Patents " mean patent claims licensable by a Contributor which are necessarily
infringed by the use or sale of its Contribution alone or when combined with the Program.
"Program" means the Contributions distributed in accordance with this Agreement.
"Recipient" means anyone who receives the Program under this Agreement, including all
Contributors.
2. GRANT OF RIGHTS
a) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a nonexclusive, worldwide, royalty-free copyright license to reproduce, prepare derivative works
of, publicly display, publicly perform, distribute and sublicense the Contribution of such
Contributor, if any, and such derivative works, in source code and object code form.
Installation guide
System Manual, 06/2008, Printout of the Online Help
67
Licenses and Open Source Software
3.6 License text of the Common Public license
b) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a nonexclusive, worldwide, royalty-free patent license under Licensed Patents to make, use, sell,
offer to sell, import and otherwise transfer the Contribution of such Contributor, if any, in
source code and object code form. This patent license shall apply to the combination of the
Contribution and the Program if, at the time the Contribution is added by the Contributor,
such addition of the Contribution causes such combination to be covered by the Licensed
Patents. The patent license shall not apply to any other combinations which include the
Contribution. No hardware per se is licensed hereunder.
c) Recipient understands that although each Contributor grants the licenses to its
Contributions set forth herein, no assurances are provided by any Contributor that the
Program does not infringe the patent or other intellectual property rights of any other entity.
Each Contributor disclaims any liability to Recipient for claims brought by any other entity
based on infringement of intellectual property rights or otherwise. As a condition to
exercising the rights and licenses granted hereunder, each Recipient hereby assumes sole
responsibility to secure any other intellectual property rights needed, if any. For example, if a
third party patent license is required to allow Recipient to distribute the Program, it is
Recipient's responsibility to acquire that license before distributing the Program.
d) Each Contributor represents that to its knowledge it has sufficient copyright rights in its
Contribution, if any, to grant the copyright license set forth in this Agreement.
3. REQUIREMENTS
A Contributor may choose to distribute the Program in object code form under its own
license agreement, provided that:
a) it complies with the terms and conditions of this Agreement; and
b) its license agreement:
i) effectively disclaims on behalf of all Contributors all warranties and conditions, express and
implied, including warranties or conditions of title and non-infringement, and implied
warranties or conditions of merchantability and fitness for a particular purpose;
ii) effectively excludes on behalf of all Contributors all liability for damages, including direct,
indirect, special, incidental and consequential damages, such as lost profits;
iii) states that any provisions which differ from this Agreement are offered by that Contributor
alone and not by any other party; and
iv) states that source code for the Program is available from such Contributor, and informs
licensees how to obtain it in a reasonable manner on or through a medium customarily used
for software exchange.
When the Program is made available in source code form:
a) it must be made available under this Agreement; and
b) a copy of this Agreement must be included with each copy of the Program.
Contributors may not remove or alter any copyright notices contained within the Program.
Each Contributor must identify itself as the originator of its Contribution, if any, in a manner
that reasonably allows subsequent Recipients to identify the originator of the Contribution.
4. COMMERCIAL DISTRIBUTION
Commercial distributors of software may accept certain responsibilities with respect to end
users, business partners and the like. While this license is
68
Installation guide
System Manual, 06/2008, Printout of the Online Help
Licenses and Open Source Software
3.6 License text of the Common Public license
intended to facilitate the commercial use of the Program, the Contributor who includes the
Program in a commercial product offering should do so in a manner which does not create
potential liability for other Contributors. Therefore, if a Contributor includes the Program in a
commercial product offering, such Contributor ("Commercial Contributor") hereby agrees to
defend and indemnify every other Contributor ("Indemnified Contributor") against any losses,
damages and costs (collectively "Losses") arising from claims, lawsuits and other legal
actions brought by a third party against the Indemnified Contributor to the extent caused by
the acts or omissions of such Commercial Contributor in connection with its distribution of
the Program in a commercial product offering. The obligations in this section do not apply to
any claims or Losses relating to any actual or alleged intellectual property infringement. In
order to qualify, an Indemnified Contributor must: a) promptly notify the Commercial
Contributor in writing of such claim, and b) allow the Commercial Contributor to control, and
cooperate with the Commercial Contributor in, the defense and any related settlement
negotiations. The Indemnified Contributor may participate in any such claim at its own
expense.
For example, a Contributor might include the Program in a commercial product offering,
Product X. That Contributor is then a Commercial Contributor. If that Commercial Contributor
then makes performance claims, or offers warranties related to Product X, those
performance claims and warranties are such Commercial Contributor's responsibility alone.
Under this section, the Commercial Contributor would have to defend claims against the
other Contributors related to those performance claims and warranties, and if a court
requires any other Contributor to pay any damages as a result, the Commercial Contributor
must pay those damages.
5. NO WARRANTY
EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS
PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY
WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for
determining the appropriateness of using and distributing the Program and assumes all risks
associated with its exercise of rights under this Agreement, including but not limited to the
risks and costs of program errors, compliance with applicable laws, damage to or loss of
data, programs or equipment, and unavailability or interruption of operations.
6. DISCLAIMER OF LIABILITY
EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT
NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING
WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT,STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR
DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
7. GENERAL
If any provision of this Agreement is invalid or unenforceable under applicable law, it shall
not affect the validity or enforceability of the remainder of the terms of this Agreement, and
without further action by the parties hereto, such provision shall be reformed to the minimum
extent necessary to make such provision valid and enforceable.
Installation guide
System Manual, 06/2008, Printout of the Online Help
69
Licenses and Open Source Software
3.7 License text of the zlib license
If Recipient institutes patent litigation against a Contributor with respect to a patent
applicable to software (including a cross-claim or counterclaim in a lawsuit), then any patent
licenses granted by that Contributor to such Recipient under this Agreement shall terminate
as of the date such litigation is filed. In addition, if Recipient institutes patent litigation against
any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Program
itself (excluding combinations of the Program with other software or hardware) infringes such
Recipient's patent(s), then such Recipient's rights granted under Section 2(b) shall terminate
as of the date such litigation is filed.
All Recipient's rights under this Agreement shall terminate if it fails to comply with any of the
material terms or conditions of this Agreement and does not cure such failure in a
reasonable period of time after becoming aware of such noncompliance. If all Recipient's
rights under this Agreement terminate, Recipient agrees to cease use and distribution of the
Program as soon as reasonably practicable. However, Recipient's obligations under this
Agreement and any licenses granted by Recipient relating to the Program shall continue and
survive.
Everyone is permitted to copy and distribute copies of this Agreement, but in order to avoid
inconsistency the Agreement is copyrighted and may only be modified in the following
manner. The Agreement Steward reserves the right to publish new versions (including
revisions) of this Agreement from time to time. No one other than the Agreement Steward
has the right to modify this Agreement. IBM is the initial Agreement Steward. IBM may
assign the responsibility to serve as the Agreement Steward to a suitable separate entity.
Each new version of the Agreement will be given a distinguishing version number. The
Program (including Contributions) may always be distributed subject to the version of the
Agreement under which it was received. In addition, after a new version of the Agreement is
published, Contributor may elect to distribute the Program (including its Contributions) under
the new version. Except as expressly stated in Sections 2(a) and 2(b) above, Recipient
receives no rights or licenses to the intellectual property of any Contributor under this
Agreement, whether expressly, by implication, estoppel or otherwise. All rights in the
Program not expressly granted under this Agreement are reserved.
This Agreement is governed by the laws of the State of New York and the intellectual
property laws of the United States of America. No party to this Agreement will bring a legal
action under this Agreement more than one year after the cause of action arose. Each party
waives its rights to a jury trial in any resulting litigation.
3.7
License text of the zlib license
License
zlib.h -- interface of the 'zlib' general purpose compression library
version 1.2.2, October 3rd, 2004
Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied warranty. In no event will the
authors be held liable for any damages arising from the use of this software. Permission is
granted to anyone to use this software for any purpose, including commercial applications,
and to alter it and redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you wrote
the original software. If you use this software in a product, an acknowledgment in the
product documentation would be appreciated but is not required.
70
Installation guide
System Manual, 06/2008, Printout of the Online Help
Licenses and Open Source Software
3.8 License text of the libjpeg package license
2. Altered source versions must be plainly marked as such, and must not be misrepresented
as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly [email protected]
Mark Adler [email protected]
3.8
License text of the libjpeg package license
libjpeg Package License
LEGAL ISSUES
============
In plain English:
1. We don't promise that this software works. (But if you find any bugs, please let us know!)
2. You can use this software for whatever you want. You don't have to pay us.
3. You may not pretend that you wrote this software. If you use it in a program, you must
acknowledge somewhere in your documentation that you've used the IJG code.
In legalese:
The authors make NO WARRANTY or representation, either express or implied,
with respect to this software, its quality, accuracy, merchantability, or
fitness for a particular purpose. This software is provided "AS IS", and you,
its user, assume the entire risk as to its quality and accuracy.
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this
software (or portions thereof) for any purpose, without fee, subject to these
conditions:
(1) If any part of the source code for this software is distributed, then this
README file must be included, with this copyright and no-warranty notice
unaltered; and any additions, deletions, or changes to the original files
must be clearly indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying
Installation guide
System Manual, 06/2008, Printout of the Online Help
71
Licenses and Open Source Software
3.8 License text of the libjpeg package license
documentation must state that "this software is based in part on the work of
the Independent JPEG Group".
(3) Permission for use of this software is granted only if the user accepts
full responsibility for any undesirable consequences; the authors accept
NO LIABILITY for damages of any kind.
These conditions apply to any software derived from or based on the IJG code,
not just to the unmodified library. If you use our work, you ought to
acknowledge us.
Permission is NOT granted for the use of any IJG author's name or company name
in advertising or publicity relating to this software or products derived from
it This software may be referred to only as "the Independent JPEG Group's
software".
We specifically permit and encourage the use of this software as the basis of
commercial products, provided that all warranty or liability claims are
assumed by the product vendor.
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,
sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
ansi2knr.c is NOT covered by the above copyright and conditions, but instead
by the usual distribution terms of the Free Software Foundation; principally,
that you must include source code if you redistribute it. (See the file
ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part
of any program generated from the IJG code, this does not limit you more than
the foregoing paragraphs do.
The Unix configuration script "configure" was produced with GNU Autoconf.
It is copyright by the Free Software Foundation but is freely distributable.
The same holds for its supporting scripts (config.guess, config.sub,
ltconfig, ltmain.sh). Another support script, install-sh, is copyright
by M.I.T. but is also freely distributable.
It appears that the arithmetic coding option of the JPEG spec is covered by
patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot
72
Installation guide
System Manual, 06/2008, Printout of the Online Help
Licenses and Open Source Software
3.9 License text of the Info-ZIP license
legally be used without obtaining one or more licenses. For this reason,
support for arithmetic coding has been removed from the free JPEG software.
(Since arithmetic coding provides only a marginal gain over the unpatented
Huffman mode, it is unlikely that very many implementations will support it.)
So far as we are aware, there are no patent restrictions on the remaining
code.
The IJG distribution formerly included code to read and write GIF files.
To avoid entanglement with the Unisys LZW patent, GIF reading support has
been removed altogether, and the GIF writer has been simplified to produce
"uncompressed GIFs". This technique does not use the LZW algorithm; the
resulting GIF files are larger than usual, but are readable by all standard
GIF decoders.
We are required to state that
"The Graphics Interchange Format(c) is the Copyright property of
CompuServe Incorporated. GIF(sm) is a Service Mark property of
CompuServe Incorporated."
3.9
License text of the Info-ZIP license
Info-ZIP license
This is version 2005-Feb-10 of the Info-ZIP license.
The definitive version of this document should be available at ftp://ftp.infozip.org/pub/infozip/license.html indefinitely and a copy at http://www.infozip.org/pub/infozip/license.html.
Copyright (c) 1990-2005 Info-ZIP. All rights reserved.
For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of
individuals:
Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly,
Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert
Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der
Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov,
Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Steven M. Schweda,
Christian Spieler, Cosmin Truta, Antoine Verheijen, Paul von Behren, Rich Wales, Mike
White.
This software is provided "as is," without warranty of any kind, express or implied. In no
event shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special
or consequential damages arising out of the use of or inability to use this software.
Installation guide
System Manual, 06/2008, Printout of the Online Help
73
Licenses and Open Source Software
3.9 License text of the Info-ZIP license
Permission is granted to anyone to use this software for any purpose, including commercial
applications, and to alter it and redistribute it freely, subject to the above disclaimer and the
following restrictions:
1. Redistributions of source code (in whole or in part) must retain the above copyright
notice, definition, disclaimer, and this list of conditions.
2. Redistributions in binary form (compiled executables and libraries) must reproduce the
above copyright notice, definition, disclaimer, and this list of conditions in documentation
and/or other materials provided with the distribution. The sole exception to this condition
is redistribution of a standard UnZipSFX binary (including SFXWiz) as part of a selfextracting archive; that is permitted without inclusion of this license, as long as the normal
SFX banner has not been removed from the binary or disabled.
3. Altered versions--including, but not limited to, ports to new operating systems, existing
ports with new graphical interfaces, versions with modified or added functionality, and
dynamic, shared, or static library versions not from Info-ZIP--must be plainly marked as
such and must not be misrepresented as being the original source or, if binaries,
compiled from the original source. Such altered versions also must not be
misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the
altered versions with the names "Info-ZIP" (or any variation thereof, including, but not
limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the explicit
permission of Info-ZIP. Such altered versions are further prohibited from
misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or the Info-ZIP
URL(s), such as to imply Info-ZIP will provide support for the altered versions.
4. Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip,""UnZipSFX," "WiZ,"
"Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.
74
Installation guide
System Manual, 06/2008, Printout of the Online Help
4
Appendix
4.1
Scope of delivery
General
Components supplied with WinCC flexible:
Component
Advanced/Standard/Compact
Software on DVD
X
Engineering tools for the configuration of WinCC flexible
Runtime and HMIs
X
WinCC flexible Version Management option 1)
X
For information about Simulation for WinCC flexible
Runtime and relevant HMI devices, refer to "Components
of WinCC flexible."
Automation License Manager
X
ProSave
X
Electronic documentation in PDF format
Floating License, including the license key
X
Certificate of license
X
License key from USB memory stick
X
1)
The licenses for WinCC flexible Version Management must be purchased separately for each
engineering station.
The package includes drivers for the communication between the HMI and the different
PLCs, as well as drivers for STEP 7, STEP 5, or OPC.
Labeling strips for HMI devices
The templates for HMI device labeling strips are available on your WinCC flexible DVD, in
the "CD3\documents\[language]\slides" folder or in the "SIMATIC WinCC flexible\WinCC
flexible Support\Utility" subfolder of the installation folder.
Principle
Additional packages available
Installation guide
System Manual, 06/2008, Printout of the Online Help
75
Appendix
4.1 Scope of delivery
SIMATIC WinCC flexible Powerpacks
WinCC flexible Standard to WinCC flexible Advanced
WinCC flexible Compact to WinCC flexible Advanced
WinCC flexible Compact to WinCC flexible Standard
Powerpacks can only be ordered as standalone license, including license key on USB
memory stick.
SIMATIC Software Update Service
WinCC flexible Advanced Software Update Service
WinCC flexible Standard Software Update Service
WinCC flexible Compact Software Update Service
Each software update contract covers only one engineering station. For each software
update contract, you will automatically receive all upgrades and service packs over a 12month period.
Documentation
WinCC flexible Compact/Standard/Advanced User Manual
WinCC flexible Micro User Manual
WinCC flexible Communication User Manual
The printed documentation can be ordered individually.
SIMATIC HMI documentation CD
In 5 languages: English, German, French, Italian and Spanish. Contents:
User manuals for WinCC flexible, ProTool, ProTool/Pro, ProTool/Lite, Panels, Panel-PCs, ProAgent,
and for options
Communication manuals
Manuals for SIMATIC Panel PCs and Panels
The HMI documentation CD can be ordered separately.
Licenses and license key
Any software package you purchase includes a specific user license and a corresponding
license key. Software such as WinCC flexible Compact is activated by installing the
corresponding license key.
A license key is available on a separate USB memory stick for activating the Engineering
System and Runtime software products, the options, and the Powerpacks.
NOTICE
WinCC flexible will only run in demo mode if the license is missing.
See also
License Keys and Authorizations (Page 30)
76
Installation guide
System Manual, 06/2008, Printout of the Online Help
Appendix
4.1 Scope of delivery
Non-licensed mode (Page 52)
Overview (Page 49)
Installation guide
System Manual, 06/2008, Printout of the Online Help
77
Appendix
4.1 Scope of delivery
78
Installation guide
System Manual, 06/2008, Printout of the Online Help
Index
A
Antivirus tools, 19
Authorization, 30, 32, 35, 38
Working with the authorization, 38
Authorization for options
HMI devices, 36
Automation License Manager, 40
Parameters, 41
C
Change language
User rights, 53
Write permissions required, 53
Changing
User interface language, 53
Components, 10, 24
Installing, 24
Uninstalling, 24
Custom installation, 11
D
Data backup, 38
Defective license, 40
Drivers, 73
E
Engineering System, 50
Starting, 50
F
Floating license, 31
Full installation, 11
H
HMI device, 36
Installation guide
System Manual, 06/2008, Printout of the Online Help
Labeling strips, 73
HMI device licensing
Not PC-based, 36
I
Installation, 9
Overview, 9
Requirement, 5
Selecting the edition, 8
SQL server, 23
Installing, 20, 24, 27
Audit Viewer, 27
Components, 24
License, 20
Option, 20, 27
Powerpack, 29
invalid license
with a time-zone change, 39
L
Labeling strips, 73
License, 20, 30, 40, 74
defective, 40
Defective license, 40
Installing, 20
Starting without valid license, 33
Uninstalling, 46
License key, 30, 74
License Key, 38, 40
Faulty assignment by the license server, 33
Requesting from a license server, 9, 33
Working with license keys, 38
License Key disk, 33
License management, 30
License Management, 40
License Manager Panel Plugin, 36
Licensing
General, 30
M
Minimum installation, 11
79
Index
N
T
Non-licensed mode, 52
ES, 33, 52
HMI devices, 37
Runtime, 35, 52
ThinClient
Licensing, 37
Trial license, 31
O
OPC, 73
Option, 26
Installing, 20, 27
uninstalling, 27
Uninstalling, 46
P
Parameters
Automation License Manager, 41
Powerpack, 28, 29
Engineering System, 28
Installing, 29
Runtime, 28
ProAgent
Installing, 11
R
Restore process
Authorization, 37, 39
License Key, 37, 39
Rights
User rights, 8
Runtime, 51
starting, 51
U
uninstalling, 27
Option, 27
Uninstalling, 24, 44, 46
Components, 24
License, 46
Option, 46
User dictionary, 44
WinCC flexible, 44
Upgrade license, 32
User dictionary
Uninstalling, 44
User interface language
Changing, 53
Selecting, 12
User rights, 8
for language change, 53
When you first start WinCC flexible, 50
W
WinCC flexible
Uninstalling, 44
Write permissions
for the initial start of WinCC flexible, 50
S
Scope of delivery, 73
Selecting the edition
Installation, 8
Single license, 31
SQL server, 23
Start menu, 49
starting, 51
Runtime, 51
Starting
Engineering System, 50
Starting WinCC flexible
Write permissions required, 50
System requirement, 5
80
Installation guide
System Manual, 06/2008, Printout of the Online Help
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement