Racks & Solutions for Business-Critical Continuity™ Adaptive power distribution in the data center A step towards the future with Emerson Network Power Contents Server rack power distribution Rack PDUs overview ......................................................................................................................... 4 Basic - Managed - Adaptive Liebert MPXTM....................................................................................................................................... 6 Modular power distribution for server racks Liebert MPHTM ...................................................................................................................................... 14 Managed Rack PDU with measurement and control function Accessories and software application ...................................................................................... 18 Knürr DI-Strip®..................................................................................................................................... 20 Basic Rack PDU in three equipment models Inline Metering System (IMS) ....................................................................................................... 30 Upgrade solution for existing power distributions Knürr PowerTrans®............................................................................................................................ 34 Power distribution rack for data center References ............................................................................................................................................. 36 System solutions ................................................................................................................................ 40 TrinergyTM .............................................................................................................................................. 44 Highest UPS level of efﬁciency – up to 99 % Core competencies ........................................................................................................................... 46 Data center infrastructure ................................................................................................................ 48 Smart Mod ............................................................................................................................................. 50 Container – data center infrastructure 2 Emerson Network Power Business-Critical Continuity™- so your success continues! Core competencies: Q AC Power Q Connectivity Q DC Power Q Embedded Computing Q Embedded Power Q Infrastructure Management & Monitoring Q Outside Plant Q Power Switching & Controls Q Precision Cooling Q Racks & Solutions Q Services Q Surge Protection No company, no matter how big it is, can afford business-critical system failures. Over the years we at Emerson Network Power have acquired unique know-how, and with our name we represent reliable rack systems, power supply, precision cooling, connectivity and integrated solutions. We can consequently ensure that you generate optimum beneﬁts from your technology investments. Thanks to Emerson Network Power's technology range and expansive competencies, the entire bandwidth of company-wide solutions is supported for today's critical business requirements. Customers all over the world build on our support for future-proof investments, because they know that we offer globally speciﬁc innovations and optimized solutions from one single source – supported by reliable local service and support. We can ensure the stable operation of your network infrastructure – regardless of whether voice, data or multimedia content are transmitted. This is based on a proven, comprehensive portfolio of products, services and systems which supports a multitude of computing, telecommunications, health care and industrial applications. This creates a foundation of trust that is only possible with a partnership with Emerson Network Power. Our assignment is to prepare you for the unknown and the unexpected. We show you the way against the background of dynamic changes in your business environment. And we help you to master the requirements this entails and avail of the greatest possible beneﬁts from your technology investments. This is what we mean by Business-Critical Continuity. 3 Safe, efﬁcient and economical: Rack PDUs from Emerson Network Power Reliable power distribution in a server rack is extremely important! Emerson Network Power's "Power Distribution Units (PDU)" provide immense security and availability with a robust electromechanical setup. BASIC PDU product series overview: Interacting with rack PDUs, rack monitoring systems and cooling systems, Liebert NFORM guarantees the monitoring and controlling of all relevant infrastructure parameters in server rooms and data centers, alarms as required, and even intercepts controlling to prevent damages. 4 ADAPTIVE The rack PDUs provide the perfect economical solution for every speciﬁc requirement and exceptional efﬁciency with numerous technical features. MANAGED The rack PDUs ensure a sound economical beneﬁt. The Liebert MPXTM's modularity also enables requirements-oriented and constantly compatible expansion. Features: Q High stability and torsional strength provided with closed sheet steel extrusions and perfected integration into Knürr rack systems. Q Best possible conductivity: continuous brass busbars with many models. Q Double spring contacts for shock hazard-proof and low contact resistance. Additional features: Q Highest possible security and availability with an operating temperature of max. 55°C. Q Extensive measurement functions (power, current, voltage and energy), with high measurement accuracy of up to ± 1%. Q Remote-switchable outputs with many models. Q Same communication cards as with Liebert MPXTM used, which means same software interface as with administration. Q Up to 4 Liebert MPXTM/MPHTM can be controlled via one IP address. Q External sensors and a display can also be addressed. Additional features: Q The Liebert MPXTM is a modular PDU; input modules and output modules can be ﬂexibly equipped as required. Q Additional wiring between the modules is not required; a ﬁxed databus is integrated on a continuous busbar. Q Highest power density up to max. 3 x 63 A per bar possible. Q Possible failures can be detected early on with additional monitoring (N-conductor, apparent power, crest factor and power factor). Q Depending on the output module measuring and remote switching is possible up to output level, which allows each server to be monitored individually. Q The output modules can be changed during running operation; there are no downtimes. Emerson Network Power Rack PDUs Europe – product series overview From page 22 From page 16 From page 8 TM Knürr DI-STRIP BASIC Rack PDU® Liebert MPXTM ADAPTIVE Rack PDU Liebert MPH MANAGED Rack PDU Features Knürr DI-STRIP® Elementary Knürr DI-STRIP M® Knürr DI-STRIP RM® Liebert MPHTM Branch Monitored Liebert MPH TM controlled Liebert MPXTM Elementary Liebert MPXTM Elementary Phase monitored Liebert MPXTM Branch monitored Liebert MPXTM Receptacle managed Power distribution x x x x x x x x x x x x Fixed Fixed Modular Modular Modular Modular Modular x x x x x x x x x x x x x x x x Modular x Display Remote interface Measuring at input level x Measuring per group Measuring per output x Switching per output x Measurement parameters A A A,V,W,KWh, Hz A,V,W,KWh, Hz x A,V,W,KWh, Hz A,V,W,KWh, VA, Hz, Power factor A,V,W,KWh, VA, Hz, Power factor, crest factor Input power 1ph + 3ph max 32A 1ph + 3ph max 32A 1ph + 3ph max 32A 1ph + 3ph max 32A 1ph + 3ph max 32A 1ph + 3ph max 63A 1ph + 3ph max 63A 1ph + 3ph max 63A 1ph + 3ph max 63A Outputs IEC C13&C19 Schuko Switzerland France IEC C13&C19 Schuko Switzerland France IEC C13&C19 Schuko Switzerland France IEC C13&C19 IEC C13&C19 IEC C13&C19 Schuko IEC C13&C19 Schuko IEC C13&C19 Schuko IEC C13&C19 Schuko x x x x x The Liebert MPXTM and Liebert MPHTM accessories are largely identical, which simpliﬁes administration! INFO Connection option for different sensors You will find further details and order numbers in our product catalog: www.EmersonNetworkPower.eu 5 Liebert MPXTM Adaptive Rack PDU: Respond requirement-oriented to every change! The Liebert MPXTM modular rack PDU systemTM impressively scores points with maximum ﬂexibility, highest possible availability and low operating costs. With Liebert MPXTM users can react quickly and speciﬁcally to new requirements for rack power supply and management. Liebert MPXTM enables users to dimension their rack PDU system so that current requirements are met ﬁrst. The system can be ﬂexibly adjusted when requirements change later on. Liebert MPXTM builds on a design based on a power supply/communication bus and input/output modules. Status display (RPC-BDM) Can be easily positioned at the optimum spot for the individual rack; also functions outside the rack. This connected display can be mounted just as the user wishes. 6 Highest possible security and availability with: Q Redundant power supply for control electronics (with redundant tapping of different phases in the Power Entry Module). Q Fixed databus on the busbar (making cable breaks a thing of the past). Q Complete data tapping on the PEM (without additional external monitoring devices). Q Additional neutral conductor measurement. Q Crest factor measurement (network quality rating, which means network component failures can be identiﬁed early on). Q Optical slot space display (easy server slot space identiﬁcation at the push of a button). Maximum flexibility and scalability with: Q Conﬁguration of all modules according to their requirements (patented quick ﬁxing for safe installation). Q One busbar for different networks and power levels – input module can be freely address. Q All other components are "hot swappable” in running operation. Q Mobile display for reading all MPXTM data on the rack. Ideal for blade servers and changing environments Data centers work more and more with blade servers and require more processor power on low rack space; cabling must be simpliﬁed; power consumption must be reduced. Highest possible power levels in all areas with: Q Power illustration up to 28 kVA per bar and 55°C ambient temperature. Q Only one IP address for up to 4 bars with 24 modules. Q Plug&Play for numerous sensors. Q Extensive monitoring with a measuring accuracy of +/- 1% up to output level. Q Module and sensor auto-detect function with operating software. Q Lowest possible Liebert MPXTM system power loss. With the Liebert MPXTM the data center can quickly react to changes, which is why our product is the right choice for you infrastructure's administration. INPUT POWER Q Conﬁgurable: 20 to 60 A (USA); 16 to 63 A (EU); Q Single-phase and three-phase Q Cable routing from above and below OUTPUT DISTRIBUTOR Q Scalable, combination-compatible and swappable during operation Q Single-phase NEMA 5-20R, IEC-C13, IEC-C19, Schuko Q Load balance MODULARITY Q Input modules Q Output modules Q External display Q External sensors 10.3A 1-1 119.5V 4.32kW 5.17kVA 12345 MONITORING Q Different levels: Input level, module level, output level Q Temperature and humidity Q Door contacts and ﬂoating break input contacts REMOTE SOCKET CONTROL Q Socket level IP 1-1 10.3A LOCAL MONITORING Q Display for user Q Can also be mounted outside the rack 119.5V 4.32kW 5.17kVA 12345 REMOTE MONITORING Q Secure web and SNMP interfaces Q Liebert Nform QAvocent DSView OVERLOAD PROTECTION Q Physically and electrically insulated circuit breakers for every socket module RACK PDU ARRAY™ Q One IP for up to 4 rack PDUs Q Liebert MPXTM and Liebert MPHTM in the same private network FORM FACTOR Q Vertical mounting (0 U) Q Fits into trade standard 23/42 U racks and/or 800 mm wide racks Do you like to be one step ahead of the next requirement? Liebert MPXTM lets you. Liebert MPXTM: Four equipment models for different requirements The Liebert MPXTM modular rack PDU consists of various modules. The foundation stone is a busbar, which is responsible for the power and communication distribution to the individual modules. The input power is routed via the Liebert MPXTM Power Entry Module (Liebert MPXTM PEM) to the Liebert MPXTMsystem. Different output modules (Liebert MPXTM Branch Receptacle Modules, Liebert MPXTM BRM) are available according to requirements. Four different variants can be set up depending on the equipment: 3. Liebert MPXTM Branch monitored Modular power distribution with measurement on the input per output module. An upgrade or downgrade to another line is possible by equipping with the respective output modules. 1. Liebert MPXTM Elementary Modular basic power distribution without measurement and control function. An upgrade to another equipment model is no problem! A combination of the "Elementary Phase monitored", "Branch monitored" and "Receptacle managed" lines on a shared busbar is also possible and is one of the exceptional features of the Liebert MPXTM. Interfaces for the network communication, the sensors and/or the local display are provided by the Liebert Rack PDU Card (Liebert RPC) in the MPXTM PEM. The Liebert RPC Card enables connection to an optional RPC Basic Display Module (RPC BDM) to display the local status and alarms. 2. Liebert MPXTM Elementary Phase monitored Modular power distribution with measurement on the input. An upgrade to the next higher line is possible by equipping with the respective output modules. 8 4. Liebert MPXTM Receptacle managed Modular power distribution with measurement on the input per output module and per output. The individual outputs can also be switched on and off remotely. A downgrade to another line is possible by equipping with the respective output modules. Output module Receptacle Managed Busbar (Liebert MPXTM PRC) Distributes power and communication signals to all modules. Output module (Liebert MPXTM BRM) Spacer for busbar Fills unused gaps until Liebert MPXTMmodule is upgraded. Output module E.g. Elementary (Liebert MPXTM BRM) Power input module (Liebert MPXTM PEM) Routes the input power and the data (depending on the module type) to the busbar system. Liebert MPXTM, equipment models in Europe Four equipment models Liebert MPXTM Elementary Liebert MPXTM Elementary Phase monitored Liebert MPXTM Branch monitored Liebert MPXTM Receptacle managed Length 1035 MPXPRC-V1035XXX x x x x Length 1880 MPXPRC-V1880XXX x x x x MPXPEM-EHAEXQ30 x x x x x x x x x x x x x 1ph 32A ﬁxed * 3ph 16A ﬁxed Input modules 3ph 32A ﬁxed 3ph 63A ﬁxed Output modules Elementary Output modules Branch monitored Output modules Receptacle managed Sensors MPXPEM-EHAEXT30 x MPXPEM-EHAAXT30 MPXPEM-EHAEXR30 x MPXPEM-EHAAXR30 MPXPEM-EHBEXZ30 x MPXPEM-EHBAXZ30 IEC-C13 L1 MPXBRM-EEBC7N1N x x IEC-C13 L2 MPXBRM-EEBC7N2N x x IEC-C13 L3 MPXBRM-EEBC7N3N x x IEC-C19 L1 MPXBRM-EEBC4O1N x x IEC-C19 L2 MPXBRM-EEBC4O2N x x IEC-C19 L3 MPXBRM-EEBC4O3N x x Schuko L1 MPXBRM-EEBC3P1N x x Schuko L2 MPXBRM-EEBC3P2N x x Schuko L3 MPXBRM-EEBC3P3N x x IEC-C13 L1 MPXBRM-EBBC6N1N x IEC-C13 L2 MPXBRM-EBBC6N2N x IEC-C13 L3 MPXBRM-EBBC6N3N x IEC-C19 L1 MPXBRM-EBBC4O1N x IEC-C19 L2 MPXBRM-EBBC4O2N x IEC-C19 L3 MPXBRM-EBBC4O3N x Schuko L1 MPXBRM-EBBC3P1N x Schuko L2 MPXBRM-EBBC3P2N x Schuko L3 MPXBRM-EBBC3P3N x IEC-C13 L1 MPXBRM-ERBC6N1N IEC-C13 L2 MPXBRM-ERBC6N2N IEC-C13 L3 MPXBRM-ERBC6N3N IEC-C19 L1 MPXBRM-ERBC4O1N IEC-C19 L2 MPXBRM-ERBC4O2N IEC-C19 L3 MPXBRM-ERBC4O3N Schuko L1 MPXBRM-ERBC3P1N Schuko L2 MPXBRM-ERBC3P2N Schuko L3 MPXBRM-ERBC3P3N 1xTemp. SN-Z01 x x x x x x x x x x x x x 3xTemp. SN-Z02 x x 3xT. + 1xHum SN-Z03 x x x 1xTemp. Mod. SN-T x x x Temp/Hum Mod. SN-TH x x x 2xDoor Mod. SN-2D x x x SN-3C x x x RPCBDM-1000 x x x 3xInput Mod. Display ext. MPXPEM-EHAAXQ30 Upgrade possible! Busbar Order number *When using 1ph input modules then only L1 output modules can be equipped. Different combinations possible! 9 Liebert MPXTM Liebert MPXTM input module/power supply Elementary and Monitored type: - The MPX PEM is fixed on the MPX PRC and provides the connection to the power supply. - Cable is connected fixed, 3 m long - With IEC60309 plug, 1Ph/N/PE 6h blue, 3Ph/N/PE 6h red. DOS20153 Monitored type: - The MPX PEM provides the connection to the databus for the data communication. - Integrated Liebert RPC-1000 communication card enables remote monitoring and maintenance of MPX units. - Provides the following measured values of the phase inputs: effective power, current, voltage, frequency and consumption. - Power alarm functions for the individual phases and their operating status are also supported. - Further important features: three displays inform the user about the current status of each individual input. An acoustic alarm is activated with specific overload conditions. - The communication card centralizes the Liebert MPX's local and remote administration. - There is administration via web and SNMP for systems connected to the Ethernet. - Also serves as the connection point for versatile support options and devices, such as the display module (RPC BDM), various sensors and connection to other Liebert MPXTM or Liebert MPHTM systems, for example. - Has RJ-45 ports for all connections and does not require any special cabling. - Supports 10 and 100 MBit Ethernet and provides on-site firmware upgrade. Technical data Interfaces: - RJ-45 LAN port (10/100 MBit) – for connecting to the local network (LAN) via an Ethernet cable. Dimensions in mm: L = Length, W = Width, H = Height, S = Switch, n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of packaging, = Express item Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound Replace .x with the number of your color combination: .1 = RAL 7035, .6 RAL7035/RAL 2003 10 U - Expansion/administration port for local configuration using a computer/ laptop, for setting up a link-up of several PDUs (Liebert MPXTM or MPHTM). - Display port for connecting the RPC BDM (display module). - External sensor port for connecting optional sensors. Supported technologies: - Web support, provides Liebert MPXTM control and management. Authorized users can view status information on their network. - SNMP support, provides Liebert MPXTM SNMP management. - Easy integration into Liebert Nform, Avocent DSView and Nagios. Material/ﬁnish Housing: Aluminum Cover: Sheet steel Power contacts: Silvered Databus contacts: Gilded (only Monitored type) Dimensions Width: 75 mm Height: 65 mm Cable: 3 m Color Housing: Aluminum/RAL7021 dark gray Approvals - CE Symbol in accordance with Low Voltage Directive, 2006/95/EC - EMC Directive 2004/108/EC - BV GS Supply schedule 1 MPX PEM power input module incl. connection cable incl. RPC-1000 communication card (only Monitored type) L W H Feed Load rating Type 220 75 65 Fixed 230VAC, max 32A Elementary MPXPEM-EHAEXQ30 Order no. 1 unit UP 220 75 65 Fixed 230/400VAC, max 16A Elementary MPXPEM-EHAEXT30 1 unit 220 75 65 Fixed 230/400VAC, max 32A Elementary MPXPEM-EHAEXR30 1 unit 266 75 65 Fixed 230/400VAC, max 63A Elementary MPXPEM-EHBEXZ30 1 unit 220 75 65 Fixed 230VAC, max 32A Monitored MPXPEM-EHAAXQ30 1 unit 220 75 65 Fixed 230/400VAC, max 16A Monitored MPXPEM-EHAAXT30 1 unit 220 75 65 Fixed 230/400VAC, max 32A Monitored MPXPEM-EHAAXR30 1 unit 266 75 65 Fixed 230/400VAC, max 63A Monitored MPXPEM-EHBAXZ30 1 unit Liebert MPXTM BRM Output Module - The MPX BRM takes care of the power distribution to the individual consumers. - Each module taps a phase; this is color-identified on the module. - All modules are protected against overload with a 20A circuit breaker. - Changing the modules during operation enables a user-defined installation, without having to shut down the Liebert MPXTM. - Up to 3 BRM output modules can be installed on a 1,035 mm long PRC busbar, and up to 6 can be installed on a 1,880 mm long PRC busbar. - The MPX BRMs have an LED-ID indicator, which clearly identifies every module with a number. - The modules are administered in the software. - Provide the following measured values: voltage, power, current, apparent power, kWh, frequency, power factor and crest factor. - Power alarm functions and the operating status are supported. - The individual outputs can be switched on and off remotely. Material/ﬁnish Housing: Aluminum Cover: Sheet steel Power contacts: Silvered Databus contacts: Gilded (type B and R only) Type E - Elementary: - Module for power distribution via respective outputs. DOS20153 Type B – Branch monitored: - Module for power distribution via respective outputs with measurement function on module level. - The MPX BRMs have an LED-ID indicator, which clearly identifies every module with a number. - The modules are administered in the software - Provide the following measured values: voltage, power, current, apparent power, kWh and power factor. - Power alarm functions and the operating status are supported. Dimensions Width: 75 mm Height: 65 mm Color Housing: Aluminum/RAL7021 dark gray Approvals - CE label in accordance with Low Voltage Directive 2006/95/EC - EMC Directive 2004/108/EC - BV GS Type R – Receptacle managed: - Module for power distribution via respective outputs with measurement function on Module level and output level. L n Outputs Load rating per output Supply schedule 1 MPXTM BRM Output Module Phase tapping Type Order no. UP 266 7 IEC320 C13 10A L1 E MPXBRM-EEBC7N1N 1 unit 266 7 IEC320 C13 10A L2 E MPXBRM-EEBC7N2N 1 unit 266 7 IEC320 C13 10A L3 E MPXBRM-EEBC7N3N 1 unit 266 4 IEC320 C19 16A L1 E MPXBRM-EEBC4O1N 1 unit 266 4 IEC320 C19 16A L2 E MPXBRM-EEBC4O2N 1 unit 266 4 IEC320 C19 16A L3 E MPXBRM-EEBC4O3N 1 unit 266 3 Schuko CEE 7/4 16A L1 E MPXBRM-EEBC3P1N 1 unit 266 3 Schuko CEE 7/4 16A L2 E MPXBRM-EEBC3P2N 1 unit 266 3 Schuko CEE 7/4 16A L3 E MPXBRM-EEBC3P3N 1 unit 266 6 IEC320 C13 10A L1 B MPXBRM-EBBC6N1N 1 unit 266 6 IEC320 C13 10A L2 B MPXBRM-EBBC6N2N 1 unit 266 6 IEC320 C13 10A L3 B MPXBRM-EBBC6N3N 1 unit 266 4 IEC320 C19 16A L1 B MPXBRM-EBBC4O1N 1 unit 266 4 IEC320 C19 16A L2 B MPXBRM-EBBC4O2N 1 unit C19 266 4 IEC320 16A L3 B MPXBRM-EBBC4O3N 1 unit 266 3 Schuko CEE 7/4 16A L1 B MPXBRM-EBBC3P1N 1 unit 266 3 Schuko CEE 7/4 16A L2 B MPXBRM-EBBC3P2N 1 unit 266 3 Schuko CEE 7/4 16A L3 B MPXBRM-EBBC3P3N 1 unit 266 6 IEC320 C13 10A L1 R MPXBRM-ERBC6N1N 1 unit 266 6 IEC320 C13 10A L2 R MPXBRM-ERBC6N2N 1 unit 266 6 IEC320 C13 10A L3 R MPXBRM-ERBC6N3N 1 unit 266 4 IEC320 C19 16A L1 R MPXBRM-ERBC4O1N 1 unit 266 4 IEC320 C19 16A L2 R MPXBRM-ERBC4O2N 1 unit 266 4 IEC320 C19 16A L3 R MPXBRM-ERBC4O3N 1 unit 266 3 Schuko CEE 7/4 16A L1 R MPXBRM-ERBC3P1N 1 unit 266 3 Schuko CEE 7/4 16A L2 R MPXBRM-ERBC3P2N 1 unit 266 3 Schuko CEE 7/4 16A L3 R MPXBRM-ERBC3P3N 1 unit Liebert MPXTM Liebert MPXTM PRC - Power Distribution Unit/Communication Bus - The MPX PRC is the foundation stone of the Liebert MPX PDU. - Power and data transfer buses are integrated fixed over the entire length of the MPX PRC. - The MPX BRMs (output modules) and the MPX PEM (Power Entry Module) are fixed on the MPX PRC and depending on the type take care of the modules' power feed, output, monitoring and management. Supply schedule 1 MPX PRC - Power Distribution Unit/ Communication Bus 1 mounting set Dimensions Width: 68 mm Height: 24 mm DOS20153 Dimensions in mm: L = Length, W = Width, H = Height, S = Switch, n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of packaging, = Express item Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound Replace .x with the number of your color combination: .1 = RAL 7035, .6 RAL7035/RAL 2003 12 W Approvals - CE Symbol in accordance with Low Voltage Directive, 2006/95/EC - EMC Directive 2004/108/EC - BV GS Load rating Max. current intensity: 3 x 63 A Nominal voltage (L-N / L-L): 230 / 400 VAC Material/ﬁnish Busbar housing: Aluminum Busbars: Copper Databus: Gilded L Color Housing: Aluminum H U Model Order no. UP 1035 68 24 23 1 PEM (220mm) + 3 BRM MPXPRC-V1035XXX 1 unit 1880 68 24 42 1 PEM (220/266mm) + 6 BRM MPXPRC-V1880XXX 1 unit Liebert MPXTM/MPHTM - Sensors DOS20153 - The sensors are designed for tool-less installation in a Knürr Miracel Rack, but they can also be installed in any other rack. - "Fixed" type sensors are fixed to a cable. - "Modular" type sensors can be connected with the delivered cable. - Are affixed to the RPC-1000 communication card. - Several sensors can be connected in rows (max. length: 20 m). - Are automatically displayed in the Liebert MPXTM/MPHTM software. - Temperature measuring range: 5-55°C Accuracy: +/- 5% Humidity measuring range: 10 – 95% Accuracy: +/- 3.5% Note The sensors are not required for operating the Liebert MPXTM or MPHTM, but they require the Liebert RPC-1000 (communication card) Supply schedule 1 sensor with connection cable Cable length Type Model Order no. UP 3660 Fixed Single temp. sensor SN-Z01 1 unit 5180 Fixed Triple temp. sensor SN-Z02 1 unit 5180 Fixed Triple temp. sensor + single humidity SN-Z03 1 unit 2000 Modular Single temp. sensor SN-T 1 unit 2000 Modular Triple temp. sensor + single humidity SN-TH 1 unit 2000 Modular 2 x door contact - input module* SN-2D 1 unit 2000 Modular 3 x digital input SN-3C 1 unit * Suitable door contact switch: Order no.: 06.108.115.9 Liebert RPC BDM - 1000 Display Module DOS20153 - Provides the local display of the monitored data for all connected Liebert MPXTM and Liebert MPHTM systems. - Operated with the aid of a navigation switch. - Connected via a cable with the Liebert RPC, which provides the user the option of placing the displays where they can be easily read in accordance with the local space conditions. - An individual display can be used for up to four the Liebert MPXTM Liebert MPHTM PDUs, which are connected to a PDU array. L W H U Model Note The Display Module is not required for operating the Liebert MPXTM or MPHTM, but it requires the Liebert RPC-1000 (communication card). Supply schedule 1 RPCBDM-1000 Display Module 1 connection cable, 2 m 1 mounting set Order no. UP RPCBDM-1000 1 unit 13 Liebert MPH TM Managed Rack PDU: Systems monitoring and control Liebert MPHTM Managed Rack PDU is a power supply system with monitoring and control functions. The housing consists of a robust sheet steel enclosure, so that the PDU can be easily installed in a Knürr rack, or even into other enclosure systems. The Liebert MPHTM can be installed vertically or horizontally (19"), depending on the type. The PDU is delivered preinstalled with the same communication card (RPC-1000) as the Liebert MPXTM. All Liebert MPXTM external modules can therefore be connected (e.g. sensors, display module). Up to four Liebert MPXTM/MPHTM can be connected as rack PDU array to consolidate the user's IP connection and the device monitoring. Liebert MPHTM is available in two equipment models: 1: Liebert MPHTM Type RM The Liebert MPHTM Type RM is a monitored PDU that monitors the phase inputs. Measured per phase are: power, current, voltage and consumption. The current is also monitored per group (only 32A model). Different threshold values enable detailed alarm signals. 14 2: Liebert MPHTM Type C The Liebert MPHTM Type C can also switch the individual outputs on and off remotely. Highest possible security and availability with: Q Power illustration up to 22 kVA per PDU and 55°C ambient temperature. Q N-conductor current display with 3-phase feed, which prevents an overload on the feed cable. Q Overload protection can be extended per group with all 32A models, minimizes danger with cascaded PDU overload. Q Setting alarm threshold values, which means possible failures are already identiﬁed early on. Flexibility with: Q Connection option for an external display, which can be easily mounted and also combined with the Liebert MPXTM. Q Connection option for external sensors, which means temperatures and humidity can be monitored. Q Doors and alarm contacts can also be monitored and displayed via external input address. Q Versatile installation in the rack as 19" or space-saving vertical installation. Q Same, compatible monitoring platform for Liebert MPHTM and Liebert MPXTM. Low operating costs: Q Rack PDU array setup, which means up to 4 MPH/MPX can be controlled with one IP address; the installation is quicker and easier. Q Extensive energy and power measurement, which provides data that is required for maximizing the power and cooling infrastructure. Q Special switching technology of the individual sockets, which reduces the rack PDU's power loss. Q Data interface with http and https protocol; no external software required for conﬁguration and monitoring. The PDU can, however, also be integrated via SNMP into other management addresses. INPUT POWER Q 20 to 30 A (USA); Q 16 to 32 A (EU); Q Single-phase and three-phase OUTPUT DISTRIBUTOR Q NEMA 5-20R single-phase, Q IEC-C13 and IEC-C19; Q combination systems MODULARITY Q Communication card Q External display Q External sensors 10.3A 1-1 119.5V 4.32kW 5.17kVA 12345 MONITORING Q Input level Q Group level depending on type Q Temperature and humidity Q Door contacts and ﬂoating break input contacts REMOTE SOCKET CONTROL Q Socket level IP 1-1 10.3A LOCAL MONITORING Q Display for user Q Can also be mounted outside the rack 119.5V 4.32kW 5.17kVA 12345 REMOTE MONITORING Q Secure web and SNMP interfaces Q Liebert Nform Q Avocent DSView OVERLOAD PROTECTION Q Circuit breakers for every group RACK PDU ARRAY™ Q One IP for up to 4 rack PDUs Q Liebert MPXTM and Liebert MPHTM in the same private network FORM FACTOR Q Vertical mounting (0 U) Q Rack installation Q Slimline 0 U form factor for positioning two PDUs in just one rack Liebert MPHTM Managed Rack PDU is used for easy monitoring and controlling of the power supply in server racks. Liebert MPHTM Liebert MPHTM Rack PDU - The Liebert MPHTM Type RM is a monitored PDU that monitors the phase inputs. Measured per phase are: power, current, voltage and consumption. The current per group is also monitored (only 32 A version). - The Liebert MPHTM Type C can also switch the individual outputs on and off remotely. - Integrated Liebert RPC-1000 communication card enables remote monitoring and maintenance of MPH units. - The RPC-1000 enables the interconnection of several MPH or MPX units and the connection of Liebert MPHTM with the Liebert MPXTM units for monitoring and administration. - The Liebert MPHTM can be monitored directly on-site with the RPC BDM-1000, an optional display module that is connected directly with the communication card. - The monitoring unit can be flexibly mounted on the rack. L DOS20153 = Express item Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound Replace .x with the number of your color combination: .1 = RAL 7035, .6 RAL7035/RAL 2003 16 Input plug Dimensions Width: 50 mm (vertical), 483 mm (19”) Height: 80 mm (vertical), 44 mm (19”) Cable: 3 m Color Housing: RAL7021 dark gray Approvals - CE Symbol in accordance with Low Voltage Directive, 2006/95/EC - EMC Directive 2004/108/EC - GS Supply schedule 1 Liebert MPHTM Socket Strip (PDU) 1 mounting brackets incl. RPC-1000 communication card Order no. UP 438* RM 230Vac, 16A IEC320-Sheet I 9xC13 MPH-EBR09NXXO30 1 unit 438* RM 230Vac, 32A IEC60309 1ph/N/PE 6h 9xC13 MPH-EBR09NXXQ30 1 unit 1730 RM 230Vac, 16A IEC320-Sheet I 27xC13 MPH-EBV27NXXO30 1 unit 1730 RM 230Vac, 16A IEC320-Sheet I 21xC13/6xC19 MPH-EBV27NOXO30 1 unit 1730 RM 230Vac, 32A IEC60309 1ph/N/PE 6h 21xC13/6xC19 MPH-EBV27NOXQ30 1 unit 1730 RM 230Vac, 32A IEC60309 1ph/N/PE 6h 27xC13 MPH-EBV27NXXQ30 1 unit Outputs IEC320 1730 RM 230/400Vac, 16A IEC60309 3ph/N/PE 6h 27xC13 MPH-EBV27NXXT30 1 unit 1730 RM 230/400Vac, 16A IEC60309 3ph/N/PE 6h 21xC13/6xC19 MPH-EBV27NOXT30 1 unit 1730 RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 27xC13 MPH-EBV27NXXR30 1 unit 1730 RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 21xC13/6xC19 MPH-EBV27NOXR30 1 unit 1 unit 438* C 230Vac, 16A IEC320-Sheet I 9xC13 MPH-ECR09NXXO30 438* C 230Vac, 32A IEC60309 1ph/N/PE 6h 9xC13 MPH-ECR09NXXQ30 1 unit 1730 C 230Vac, 16A IEC320-Sheet I 27xC13 MPH-ECV27NXXO30 1 unit 1730 C 230Vac, 16A IEC320-Sheet I 21xC13/6xC19 MPH-ECV27NOXO30 1 unit 1730 C 230Vac, 32A IEC60309 1ph/N/PE 6h 21xC13/6xC19 MPH-ECV27NOXQ30 1 unit 1730 C 230Vac, 32A IEC60309 1ph/N/PE 6h 27xC13 MPH-ECV27NXXQ30 1 unit 1730 C 230/400Vac, 16A IEC60309 3ph/N/PE 6h 27xC13 MPH-ECV27NXXT30 1 unit 1730 C 230/400Vac, 16A IEC60309 3ph/N/PE 6h 21xC13/ 6xC19 MPH-ECV27NOXT30 1 unit 1730 C 230/400Vac, 32A IEC60309 3ph/N/PE 6h 27xC13 MPH-ECV27NXXR30 1 unit 1730 C 230/400Vac, 32A IEC60309 3ph/N/PE 6h 21xC13/ 6xC19 MPH-ECV27NOXR30 1 unit * (19”) Dimensions in mm: L = Length, W = Width, H = Height, S = Switch, n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of packaging, Type Input values Material/ﬁnish Housing: Sheet steel extrusion Liebert MPXTM/MPHTM - Sensors DOS20153 - The sensors are designed for tool-less installation in a Knürr Miracel Rack, but they can also be installed in any other rack. - "Fixed" type sensors are fixed to a cable. - "Modular" type sensors can be connected with the delivered cable. - Are affixed to the RPC-1000 communication card. - Several sensors can be connected in rows (max. length: 20 m). - Are automatically displayed in the Liebert MPXTM/MPHTM software. - Temperature measuring range: 5-55°C - Accuracy: +/- 5% - Humidity measuring range: 10 – 95% - Accuracy: +/- 3.5% Note The sensors are not required for operating the Liebert MPXTM or MPHTM, but they require the Liebert RPC-1000 (communication card) Supply schedule 1 sensor with connection cable Operating instructions Cable length Type Model Order no. UP 3660 Fixed Single temp. sensor SN-Z01 1 unit 5180 Fixed Triple temp. sensor SN-Z02 1 unit 5180 Fixed Triple temp. sensor + single humidity SN-Z03 1 unit 2000 Modular Single temp. sensor SN-T 1 unit 2000 Modular Triple temp. sensor + single humidity SN-TH 1 unit 2000 Modular 2 x door contact - input module* SN-2D 1 unit 2000 Modular 3 x digital input SN-3C 1 unit * Suitable door contact switch: Order no.: 06.108.115.9 Liebert RPC BDM - 1000 Display Module DOS20153 - Provides the local display of the monitored data for all connected Liebert MPXTM and Liebert MPHTM systems. - Operated with the aid of a navigation switch. - Connected via a cable with the Liebert RPC, which provides the user the option of placing the displays where they can be easily read in accordance with the local space. - An individual display can be used for up to four the Liebert MPXTM Liebert MPHTM PDUs, which are connected to a PDU array. L W H U Model Note The Display Module is not required for operating the Liebert MPXTM or MPHTM, but it requires the Liebert RPC-1000 (communication card) Supply schedule 1 RPCBDM-1000 Display Module 1 connection cable, 2 m 1 mounting set Operating instructions Order no. UP RPCBDM-1000 1 unit 17 Accessories and software application, Liebert MPXTM and Liebert MPHTM Infrastructure management Secure web and SNMP interfaces QUser-conﬁgured alarm threshold (3 threshold values per measuring point). QSocket status and delayed switching. QElectrical measurement: V, A, kW and kW/h, power factor, Hz, Crest factor. QRack PDU array: equipment consolidation. QPDU Explorer: intuitive hierarchical interface. QPDU status display according to strip or socket. QDevice Explorer: search according to user-deﬁned device names. QEnvironment monitoring: tempera ture and humidity, ﬂoating contacts. Liebert Nform QControl technology for Liebert devices in the LAN. Q E-mail alarm and local notiﬁcations. Q Scalable software solution for the IT environment. Avocent Rack Power Manager QAlarm and incident administration of all equipment at the site. Q Control technology in real-time. Q Individually adjustable user interface. Q Trend and alarm reports. Web-based monitoring QPDU parameters monitoring via the web browser. Q No application-speciﬁc software required. Q Simultaneous display of up to 4 PDUs. Network management system Q Open standard solution. Q For all SNMP devices. Q Scalable software solution for all company sizes. Optional hardware Local display module – RPC-BDM Q Electrical and ambient parameters. Q 1 RPC-BDM for up to 4 PDUs in the array. Q PDU Explorer. Q Device Explorer. 18 Liebert SN product family: Rack Sensors Q Temperature measurement with single or multiple sensors. Q Temperature and humidity measurement with multiple sensors. Q Door contact sensors and ﬂoating input contacts. Flexible power distribution Easy integration of the rack PDUs into new or existing management platforms Rack PDU array (up to four systems) 19 Knürr DI-STRIP ® Basic Rack PDU: Robust PDUs with helpful equipment features Knürr's Basic Rack PDUs are the solution for every data center looking for robust, economical and ﬂexible rack concepts. For power distribution the Knürr DI-STRIP® product family meets the requirements of numerous IT applications and other areas. Specially conﬁgured for the growing number of electronic components in network switching racks of server racks. Available with different accessories, such as circuit breakers, surge protection, mains ﬁlter, master-slave function, emergency off button, fault current circuit breaker, local and remote power measurement, for example. Highest possible security and availability with: Q Closed sheet steel extrusion, which means high stability and torsional strength. Q Extensive certiﬁcation in acc. with international standard. Q Double spring contacts for shock hazard-proof and low contact resistance. Q Unbalanced load monitoring with 3-phase feed prevents overload on the feed cable (only DI-STRIP versions M and RM). Q Optimum load monitoring with installation of the servers (only DI-STRIP versions M and RM). Q Individual outputs backup with the DI-STRIP BladePower and Pizza Power. Maximum ﬂexibility with: Q Conﬁgurations and options with international compatibility. All DI-STRIP M / RM with display rotation for better reading. 20 Q 2.5 m or 4 m long mains cable for more spatial ﬂexibility. Q Rotating display in 90° steps (only DI-STRIP versions M and RM). Q Tool-less installation, which means quick and easy extension in the rack (only DI-STRIP HighPower). Extremely low operating costs with: Q Quick and easy installation on the rack requires minimum space and shorter installation time. Q Automatic background light reduction extends the display's service life and reduces the rack PDU power loss (only DI-STRIP models M and RM). Q Especially ﬂat housing extrusion, providing full accessibility to the 19" level with 600 mm wide server racks. INPUT POWER Q Single-phase or three-phase Q Up to 22 kVa Q Easy input supply OUTPUT DISTRIBUTOR Q NEMA 5-20R single-phase, IEC-C13 and C19, combination systems Q Schuko, France, Switzerland MODULARITY Q More connectivity with expansion unit for Basic Rack PDU GST18-PDUs FORM FACTOR Q Vertical mounting (0 U) Q Rack installation LOCAL MONITORING Q Fixed display 1-1 10.3A 119.5V 4.32kW 5.17kVA 12345 REMOTE MONITORING Q Secure web and SNMP interfaces Liebert Nform OVERLOAD PROTECTION Q Circuit breakers/fuses per branching cable/output as required ® Wenn W We nnDI-STRIP IIhre hree Sc hr Scha Schachzüge hach ha chzü züge ge b berechenbar erec er eche nbar ar ssind, ind, in d, Knürr – equipped forhenb operational erhalten erha er ha alt lten en SSie ie d die ie FFlexibilität lexi le xibi bililitä tätt mi mit DI-S DI DI-STRIP -STR TRIP IP®. reliability with alltcertiﬁ cates. Knürr DI-STRIP ®: Three equipment models for precisely your requirements Knürr DI-STRIP® Elementary: Basic Rack PDU, Knürr DI-Strip Elementary® for simple power distribution requirements. The PDUs are available in different structures, depending on the rack installation requirements. Additional functions such as surge protection, mains ﬁlter, master-slave function, emergency off button and fault current circuit breaker are also possible. All DI-STRIP HighPower are equipped with especially ﬂat housing extrusions and side cable entry. This enables installation without any loss of usable height units and cable entry from above and below. Full accessibility to the 19" level with 600 mm wide server racks is also a given. 22 Knürr DI-STRIP M® – local metered: Basic Rack PDU Knürr DI-STRIP M® for simple power distribution requirements and local power measurement for your data center. Available in single and three-phase versions up to 22 kVa, with and without power measurement. Local power measurement module features: Local power measurement features: Q M = power measurement (local). Q Tried, tested and proven DI-STRIP® PDU with integrated local power measurement module. Q Large transparent LCD display. Q Meets the strictest EMC requirements with radiation and irradiation interference. Q Integrated unbalanced load monitoring with three-phase feed. Q Rotatable displays in 90° steps. Q Automatic background light reduction. Q Optimum load monitoring with installation of the servers. Knürr DI-STRIP RM® – remote metered: Basic Rack PDU Knürr DI-STRIP RM® for simple power distribution requirements and remote power measurement for your data center. Available in single and three-phase versions up to 22 kVa, with local and remote power measurement. Knürr DI-STRIP RM® provides safe and reliable power supply in a robust, extruded enclosure. Remote power measurement module features: Q RM = power measurement (remote) Tried, tested and proven DI-STRIP® PDU with integrated power measurement module with remote monitoring. Q Large transparent LCD display. Q Meets the highest EMC requirements with radiation and irradiation interference. Q Can be set for up to 3 threshold values and unbalanced load monitoring. Q Rotatable displays in 90° steps. Q Automatic background light reduction. Q Protocols: HTTP, SNMP, Syslog. Knürr DI-Strip®, equipment models in Europe Full overview: 1 Knürr DI-STRIP®- Equipment models Options Input power Outputs Knürr DI-Strip Elementary® Knürr DI-Strip M® local metered Knürr DI-Strip RM® remote metered 1 Euro Plug System IEC 320 1x16A up to 3.68kVA IEC60320 C13 & C19 x x x 1 Classic 1x16A up to 3.68kVA Schuko, France, Switzerland x 1 Compact 1x16A up to 3.68kVA Schuko, France, Switzerland x x x 1 Protector FI 1x16A up to 3.68kVA Schuko, France, Switzerland x 1 Protector LS 1x16A up to 3.68kVA Schuko, France, Switzerland x Example: Model 1 Protector FI / LS 1x16A up to 3.68kVA Schuko, France, Switzerland x 2 1 Protector Emergency STOP 1x16A up to 3.68kVA Schuko, France x 1 Protector Emergency STOP FI/LS 1x16A up to 3.68kVA Schuko, France x 1 Power Cleaner 1x16A up to 3.68kVA Schuko, France x 1 Safety Basic 1x16A up to 3.68kVA Schuko, France, Switzerland x 1 Safety Standard 1x16A up to 3.68kVA Schuko, France, Switzerland x 1 Master Slave 1x16A up to 3.68kVA Schuko, France x 1 Combi 1x16A up to 3.68kVA Schuko, France x 1 GST18 Plug System 1x16A, 3x16A up to 11kVA Schuko, France IEC60320 x x x 1 TriplePower 3x16A up to 11kVA IEC60320 C13 & C19 Schuko x x x 2 BladePower 1x32A, 3x32A up to 22kVA IEC60320 C13 & C19 x 2 PizzaPower 1x32A, 3x32A up to 22kVA IEC60320 C13 & C19 Schuko x x x 3 HighPower 1x32A, 3x32A up to 22kVA IEC60320 C13 & C19 x Example: Model 3 x Example: Model 23 Knürr DI-Strip® – for server applications Knürr DI-STRIP® HighPower DOS20153 L Type Input values - Flat design provides access to the 19" level, even with 600 mm wide racks. - Individual backup for outputs (groups with 10 A). - Outputs divided into groups with max. 20 A per group. - Modular expansion in the rack with tool-less PDU installation. Material/ﬁnish Housing: Sheet steel, zinc-passivated, powder-coated Additional function for HighPower RM type (remote metered). - With big transparent LCD display. - Effective value display of alternating power input. - LCD display rotation in 90° steps. - Display can be switched bright or dark. - Load changes signaling. - Automatic background light reduction. - Technical description for data interface (see DI-STRIP RM). Color Housing: RAL 9005 black Input plug Dimensions Width: 134 mm Height: 47 mm Cable: 3 m Approvals - CE Symbol in accordance with Low Voltage Directive 2006/95/EC - EMC Directive 2004/108/EC - GS Supply schedule 1 socket strip (PDU) 1 integrated remote ampere meter (only HighPower RM) 2 mounting brackets Operating instructions Outputs IEC60320 C13 C19 Order no. UP Schuko 540 DI-STRIP® HighPower 230Vac, 32A IEC60309 1ph/N/PE 6h 20 4 03.632.100.8 1 unit 850 DI-STRIP® HighPower 230/400Vac, 32A IEC60309 3ph/N/PE 6h 6 12 03.632.102.8 1 unit 850 DI-STRIP® HighPower 230/400Vac, 32A IEC60309 3ph/N/PE 6h 18 6 03.632.103.8 1 unit 540 DI-STRIP® HighPower RM 230Vac, 32A IEC60309 1ph/N/PE 6h 20 4 03.632.200.8 1 unit 850 DI-STRIP® HighPower RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 6 12 03.632.202.8 1 unit 850 DI-STRIP® HighPower RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 18 6 03.632.203.8 1 unit Dimensions in mm: L = Length, W = Width, H = Height, S = Switch, n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of packaging, = Express item Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound Replace .x with the number of your color combination: .1 = RAL 7035, .6 RAL7035/RAL 2003 24 DI-STRIP® TriplePower® Euro Socket System IEC 320 with cable - Cable: H05VV-F 3G 2.5 mm2. - Cable: 2.5 m (optional with IEC60309 plug, 3Ph/N/PE 6h). - Easy mounting on the rack extrusion. - 3x16A feed as standard. - Ideal for providing redundancies (e. g. 96 A with redundant feed). - Unmistakable phase assignment color-coding. - Optimum distribution over the entire rack height (23 U or 41 U). - Alternative to 3-phase GST18 system (see page 170). DOS20126 Material/ﬁnish Housing: Closed sheet steel extrusion, zincpassivated, powder-coated texture Plastic parts: Vampamid 6 0024 VO (UL94), recyclable Dimensions Height: 45.5 mm Housing width: 44.4 mm (= 1 U) L S n F1 19” Input values Input plug 24 1833 48 1033 24 1833 48 1133 24 1733 42 483 6 • • • • • • • • Color Housing: RAL7035 light gray Plastic parts: RAL7021 dark gray Load rating 100-240/173-415 Vac Input: 3x 16 A Output: 10A (C13) Output: 16 A (C19) Approval symbols for IEC 320 3-way Euro combinations VDE, UR, CSA Supply schedule 1 socket strip 2 mounting brackets Outputs IEC60320 C13 1033 Approvals/certiﬁcates - CE label in accordance with Low Voltage Directive 2006/95/EC - EMC Directive 2004/108/EC - BV GS, CSA NRTL/C, CB-scheme Order no. UP C19 230/400Vac, 16A Open end 24 03.600.024.1 1 unit 230/400Vac, 16A Open end 48 03.600.048.1 1 unit 230/400Vac, 16A IEC60309 3ph/N/PE 6h 24 03.600.824.1 1 unit 230/400Vac, 16A IEC60309 3ph/N/PE 6h 48 03.600.848.1 1 unit 230/400Vac, 16A IEC60309 3ph/N/PE 6h 18 6 03.600.524.1 1 unit 230/400Vac, 16A IEC60309 3ph/N/PE 6h 36 6 03.600.542.1 1 unit 230/400Vac, 16A IEC60309 3ph/N/PE 6h 6 03.600.506.1 1 unit Knürr DI-STRIP® BladePower® Technical data DOS20153 - EC 320 sockets (10 A and 16 A). - Individually fused via thermal circuit breaker that can be reset in acc. with IEC60934. - Cable: H05VV-F 3G 4 mm2. - Cable: 4 m. - With IEC60309 plug, 1Ph/N/PE 6h blue, 3Ph/N/PE 6h red. Approvals - CE label in accordance with Low Voltage Directive 2006/95/EC - EMC Directive 2004/108/EC - Innova GS - CSA NRTL/C (only without plug) Load rating 100-240 / 173-415 Vac Input: 1x32 A oder 3x32 A Output: 10 A / 16 A Material / Surface Housing: Sheet steel, zinc-passivated, powder-coated Dimensions Height: approx. 60 mm Housing width: 84 mm Supply schedule 1 socket strip (PDU) 2 mounting brackets 1 19” mounting bracket (additional with 19 installation option) Operating instructions Color Housing: RAL 9005 black DOS20155 L n F1 375 S 5 740 15 375 5 740 15 • • • • • • • • 19” Plug Model Order no. UP BladePower® PDU 1x 32 A 03.630.005.1 1 unit BladePower® PDU 3x 32 A 03.630.015.1 1 unit BladePower® PDU 1x 32 A 03.630.805.1 1 unit BladePower® PDU 3x 32 A 03.630.815.1 1 unit 25 Knürr DI-Strip® – for server applications Knürr DI-STRIP® PizzaPower® Technical data - Individually fused via thermal circuit breaker that can be reset in acc. with IEC60934. - Cable: H05VV-F 3G 4 mm2. - Cable: 4 m. DOS20158 Material/ﬁnish Housing: Sheet steel, zinc-passivated, powder-coated Dimension Height: approx. 60 mm Housing width: 84 mm Height with cable: approx. 176 mm Color Housing: RAL 9005 black S n F1 19” Input values Input plug Outputs IEC60320 C13 400 7 400 7 720 16 960 24 1017 25 933 21 933 21 408 6 939 21 1362 36 1002 24 • • • • • • • • • • • UP IEC60309 1ph/N/PE 6h 7 03.631.007.1 1 unit 230Vac, 32A Open end 7 03.631.807.1 1 unit 230Vac, 32A IEC60309 1ph/N/PE 6h 12 03.631.124.1 1 unit 230Vac, 32A IEC60309 1ph/N/PE 6h 24 03.631.240.1 1 unit 230Vac, 32A IEC60309 1ph/N/PE 6h 21 03.631.214.1 1 unit 230/400Vac, 32A IEC60309 3ph/N/PE 6h 21 03.631.021.1 1 unit 230/400Vac, 32A Open end 21 03.631.821.1 1 unit 230/400Vac, 32A IEC60309 3ph/N/PE 6h 230/400Vac, 32A IEC60309 3ph/N/PE 6h 9 230/400Vac, 32A IEC60309 3ph/N/PE 6h 36 230/400Vac, 32A IEC60309 3ph/N/PE 6h 18 = Express item 1 kg = 2.2046 pound Replace .x with the number of your color combination: .1 = RAL 7035, .6 RAL7035/RAL 2003 26 Order no. C19 230Vac, 32A Dimensions in mm: L = Length, W = Width, H = Height, S = Switch, n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of packaging, Conversion: 1 mm = 0.03937 inch Load rating 100-240 / 173-415 Vac Input: 1x32 A or 3x32 A Output: 10A (C13) Output: 16 A (C19) Supply schedule 1 socket strip (PDU) 2 mounting brackets 1 19” mounting bracket (additional with 19 installation option) Operating instructions DOS20159 L Approvals - CE Symbol in accordance with Low Voltage Directive, 2006/95/EC - EMC Directive 2004/108/EC - BV GS - CSA NRTL/C (only without plug) 4 4 6 03.631.006.1 1 unit 12 03.631.912.1 1 unit 03.631.360.1 1 unit 03.631.186.1 1 unit 6 Knürr DI-STRIP® Euro Socket System, IEC 320 with cable and right angle plug DOS20062 - Optionally with lit switch, 2-pole switching. 19” installation option. With Euro combinations of IEC 320 sockets . Cable: H05VV-F 3G 1.5 mm2. Cable: 2.5 m. Without fusing. - EMC Directive 2004/108/EC - Innova-GS - CB-scheme Color Housing: RAL 7035 light gray Plastic parts: RAL 7021 dark gray Material/ﬁnish Housing: Closed sheet steel extrusion, zincpassivated, powder-coated texture Plastic parts: Vampamid 6 0024 VO (UL94), recyclable Load rating 250 Vac/10 A, Sheet F 250 Vac/16 A, Sheet J Approval symbols for IEC 320 3-way Euro combinations VDE, UR, CSA Dimensions Height: 45.5 mm Housing width: 44.4 mm (= 1 U) DOS00498 Supply schedule 1 socket strip 2 mounting brackets Approvals/certiﬁcates - CE label in accordance with Low Voltage Directive 2006/95/EC L S n F1 6 • 9 • • • • • 19” Input values Input plug Output Sheet F Sheet J Order no. UP 230Vac, 16A Schuko CEE7 6 03.600.006.1 1 unit 230Vac, 16A Schuko CEE7 9 03.602.009.1 1 unit 230Vac, 10A ICE60320 Sheet E 12 03.600.312.1 1 unit 230Vac, 16A ICE60320 Sheet I 15 3 03.600.418.1 1 unit 230Vac, 16A ICE60309 1ph/N/PE 6h 15 3 03.600.518.1 1 unit DOS20042 333 383 483 12 783 18 783 18 • • 27 Knürr DI-Strip® – for server applications Knürr DI-STRIP® M - With big transparent LCD display. - Effective value display of alternating currents per phase (1-phase or 3-phase, depending on model). - LCD display rotation in 90° steps. - Display can be switched bright or dark. - Unbalanced-load warning display with 3-phase model. - Load changes signaling. - Automatic background light reduction. - Cable: 4m H05VV—F 5 G 4mm (PizzaPower M). - Cable: 2.5m H05VV-F 5 G 2.5mm (TriplePower M). - Cable: 2.5m H05VV-F 3G 1.5mm (DI-STRIP Compact M, DI-STRIP IEC320 M). DOS80002 Approvals - CE label in accordance with Low Voltage Directive 2006/95/EC - EMC Directive 2004/108/EC - GS Color PizzaPower M model: Housing: RAL 9005 black Other models: Housing: RAL 7035 light gray Plastic parts: RAL 7021 dark gray Supply schedule 1 socket strip with ampere meter 2 mounting brackets 2 19” mounting brackets (with 19” installation option) Material/ﬁnish PizzaPower® model: Housing: Sheet steel, zinc-passivated, powder-coated Other models: Housing: Closed sheet steel extrusion, zinc-passivated, powder-coated texture Plastic parts: Vampamid 6 0024 VO (UL94), recyclable L Type Input values Input plug Note - Other models (e.g. Sheet J outputs) on request Outputs IEC60320 C13 C19 Order no. UP Schuko 483 DI-STRIP® PizzaPower® M 230Vac, 32A IEC60309 1ph/N/PE 6h 7 03.636.007.1 1 unit 933 DI-STRIP® PizzaPower® M 230/400Vac, 32A IEC60309 3ph/N/PE 6h 21 03.636.021.1 1 unit 1033 DI-STRIP® TriplePower® M 230/400Vac, 16A IEC60309 3ph/N/PE 6h 21 03.606.821.1 1 unit 1833 DI-STRIP® TriplePower® M 230/400Vac, 16A IEC60309 3ph/N/PE 6h 45 03.606.845.1 1 unit 1133 DI-STRIP® TriplePower® M 230/400Vac, 16A IEC60309 3ph/N/PE 6h 18 6 03.606.824.1 1 unit 1733 DI-STRIP® TriplePower® M 230/400Vac, 16A IEC60309 3ph/N/PE 6h 36 6 03.606.842.1 1 unit 230Vac, 16A Schuko 03.306.006.1 1 unit 03.606.009.1 1 unit 03.606.200.1 1 unit 483 DI-STRIP® Compact M 483 DI-STRIP® IEC320 M 230/400Vac, 16A Schuko 233 DI-STRIP® Ampermeter 230/400Vac, 16A GST18 Dimensions in mm: L = Length, W = Width, H = Height, S = Switch, n = Number of sockets, F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe = Child-safe, U =Standard height unit, UP = Unit of packaging, = Express item Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound Replace .x with the number of your color combination: .1 = RAL 7035, .6 RAL7035/RAL 2003 28 6 9 Knürr DI-STRIP® RM - Real RMS value display for the alternating current per phase. - LCD display rotation in 90° steps. - Display bright/dark switchover. - Warning display for unbalanced load. - Load changes signaling. - Automatic background light dimming. DOS80002 Material/ﬁnish - PizzaPower model: Housing: Sheet steel, zinc-passivated, powder-coated - Other models: Housing: Closed sheet steel extrusion, zinc-passivated, powder-coated texture Plastic parts: Vampamid 6 0024 VO (UL94), recyclable Data interface: - The plug strip can be integrated into the network via an RJ45 plug. - Access is possible without special software via a remote browser. - Three variable limit values and a warning for unbalanced loads can be specified. - The module enables access for up to 5 users or administrators; access is passwordprotected. - The software displays the name and place of the PDU; this information can be entered by an administrator. - The user can specify a static IP address or access using DHCP. - Firmware updates can be made via a browser. - Supported protocols: HTTP, SNMP (Traps, SET, GET), Syslog. Dimensions Width: 84 mm (PizzaPower), 44.4 mm (other) Height: 60 mm (PizzaPower), 44.4 mm (other) Color PizzaPower model: Housing: RAL 9005 black Other models: Housing: RAL 7035 light gray Plastic parts: RAL 7021 dark gray Approvals - CE label in accordance with Low Voltage Directive 2006/95/EC - EMC Directive 2004/108/EC - GS Supply schedule 1 socket strip (PDU) with remote ampere meter 1 mounting brackets Operating instructions L Type Input values Input plug Outputs IEC60320 C13 733 DI-STRIP® Compact RM 8 C19 Order no. UP Schuko 230Vac, 16A Schuko CEE 7/4 8 03.307.008.1 1 unit 1183 DI-STRIP® Compact RM 17 230Vac, 16A Schuko CEE 7/4 17 03.307.017.1 1 unit 633 IEC320 RM9 230Vac, 16A Schuko CEE 7/4 9 03.607.009.1 1 unit 933 IEC320 RM18 230Vac, 16A Schuko CEE 7/4 18 03.607.018.1 1 unit 1133 DI-STRIP® TriplePower RM 230/400Vac, 16A IEC60309 3ph/N/PE 6h 24 03.607.825.1 1 unit 1833 DI-STRIP® TriplePower RM 230/400Vac, 16A IEC60309 3ph/N/PE 6h 45 03.607.845.1 1 unit 1233 DI-STRIP® TriplePower RM 230/400Vac, 16A IEC60309 3ph/N/PE 6h 18 6 03.607.824.1 1 unit 1833 DI-STRIP® TriplePower RM 230/400Vac, 16A IEC60309 3ph/N/PE 6h 36 6 03.607.842.1 1 unit 1111 DI-STRIP® PizzaPower® RM 230Vac, 32A IEC60309 1ph/N/PE 6h 24 DI-STRIP® PizzaPower® RM 230Vac, 32A IEC60309 1ph/N/PE 6h 12 1168 DI-STRIP® PizzaPower® RM 21 871 230Vac, 32A IEC60309 1ph/N/PE 6h 563 DI-STRIP® PizzaPower® RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 995 03.637.023.1 1 unit 4 03.637.016.1 1 unit 4 03.637.025.1 1 unit 6 03.637.006.1 1 unit 12 03.637.018.1 1 unit 03.637.021.1 1 unit DI-STRIP® PizzaPower® RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 6 1022 DI-STRIP® PizzaPower® RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 21 1157 DI-STRIP® PizzaPower® RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 18 6 03.637.024.1 1 unit 1751 DI-STRIP® PizzaPower® RM 230/400Vac, 32A IEC60309 3ph/N/PE 6h 36 6 03.637.042.1 1 unit 29 Inline Metering System (IMS) – Optimum upgrade solution for existing installations Knürr DI-STRIP IMS IMS model series overview: Features: Q Liebert Rack PDUs familiar software interface, as the same communication card as with Liebert MPXTM/MPHTM is used. Q Highest possible security and availability with an operating temperature of max. 55°C. Q Extensive measurement functions (power, current, voltage and energy), with high measurement accuracy of up to ± -1%. Q An N-conductor overload with 3-phase systems can be prevented, as the N-conductor current is monitored. Q Easy connection of up to 4 Liebert MPX IMS / MPHTM / MPXTM on the network with only 1 IP address. Q External sensors and a display can also be connected. Features: Q Extensive measurement functions (power, current, voltage, energy and power factor), with higher measurement accuracy of up to 0.17% referring to the end value. Q Very high input currents can be measured (up to 999A per phase via external transducer). Q The modular setup means the solution can be adjusted customerspeciﬁc (e.g. up to 4 in-feeds per module with different input plugs or even ﬁxed in-feed are possible). Q Up to 75 modules can be controlled via one IP address. Q Saving in external databases possible without additional software. Emerson Network Power Inline Metering Systems (IMS) beneﬁts: Q Existing rack PDUs do not have to be swapped out, as the modules can be upgraded. Q All consumers (where possible) can be integrated into the monitoring system, as numerous plug systems are provided (1ph – 3ph, max 63A per phase). Q Flexible installation inside or outside the rack (e.g. in the false ﬂoor). 30 Features: Q Fast installation and easy data recording with graphic and numerical power consumption overview; can be retrieved via web interface. Q The power value can be read directly on the rack, as a local display is installed in every module. Q An N-conductor overload with 3-phase systems can be prevented, as the phase symmetry is monitored. Q Alarm signal when incidents occur, as the threshold values (phase symmetry, bottom limit, pre-warning and alarm) can be be set ﬂexibly. Liebert MPX IMS Emerson Network Power's solution for this is called IMS (Inline Metering System). These modules allow existing racks with installed basic power distributors to be upgraded accordingly. As almost all server racks are supplied with an A and a B-feed, later installation is possible without interruption. The IMS modules can also be installed space-savingly inside or outside the rack, e.g. in false ﬂoor. The Inline Metering Systems (IMS) are divided into three different product groups, with different features. Inline Metering System (IMS) Knürr MODULAR IMS Monitoring is already part of the everyday routine in most data centers when it comes to system availability. For this reason you decide with new systems for socket strips/PDUs with integrated monitoring (Managed PDUs or Adaptive PDUs). But what do you do with existing systems in which socket strips/PDUs are usually installed without measuring functions? INPUT POWER Q Single-phase or three-phase Q 16A up to 63A OUTPUT DISTRIBUTOR Q Single-phase or three-phase Q 16A up to 63A MODULARITY Q Depending on the type of communication card, external displays or external sensors 10.3A 1-1 MONITORING Q Input level 119.5V 4.32kW 5.17kVA 12345 1-1 10.3A LOCAL MONITORING Q Display for user (MPX IMS and DI-STRIP IMS) 119.5V 4.32kW 5.17kVA 12345 REMOTE MONITORING Q Secure web and SNMP interface RACK PDU ARRAY™ Q One IP address, up to 4 rack PDUs (MPX IMS) Q Liebert MPXTM, Liebert MPHTM and Liebert IMS in the same private network Existing power distribution upgrade: Inline Metering System from Emerson Network Power. 31 Emerson Network Power IMS product series Features Knürr DI-STRIP® IMS Liebert MPXTM IMS Knürr Modular IMS Measurement module x x x Modular x Display Fixed External Remote interface x x x Measuring at input level x x x Measurement modules per IP address 1 4 75 Max. measurement points per IP address 1 4 300 Visualization at PDU level x x x x x Visualization at rack level Visualization at room level Only with additional software Liebert Nform Only with additional software Liebert Nform x Measurement parameters A A,V,W,kWh A,V,W,VA, Var, kWh, cosphi. Phase asymmetry analysis x x x x x Connection option external sensors Input power 1ph + 3ph max 32A 1ph + 3ph max 32A 1ph + 3ph, max 63A (max 4 feeds), max. 3ph 999A (via external transducer) Connection option IEC 60309, IEC60320, Schuko IEC 60309 IEC 60309, GST18, ﬁxed connection Protocols HTTP, SNMP, Syslog HTTP, HTTPs, SNMP, Telnet HTTP, HTTPs, SNMP v3, Saving in external database With additional software Liebert Nform With additional Liebert Nform or Avocent DSView software Oracle, MySQL, MSSQL Order number 1 ph. 16 A 036072001 MPXIMS-EHBAXS30 030145118 Order number 1 ph. 32 A 036072011 MPXIMS-EHBAXQ30 030145128 Order number 3 ph. 16 A 036072021 MPXIMS-EHBAXT30 030145138 Order number 3 ph. 32 A 036072031 MPXIMS-EHBAXR30 030145148 Control unit Not required Not required 030145108 Order numbers: 32 Easy upgrade from basic power distributor to measurement-enabled power distributor 33 Knürr PowerTrans® Power Distribution Rack Knürr PowerTrans® … forms the interface between the low voltage feed and the PDUs of the DISTRIP® product family and other components for supplying servers and other IT equipment. The rack's basis: to connect Knürr Miracel® with the existing PowerTrans® 19" slot-in units the elements are simply slotted in and ﬁxed at a free spot. The electrical connection to the rack is set up immediately. The power distribution is performed in the individual slot-in units and therefore no longer has to be installed ﬁxed in the building. Up to 8 slot-ins can be integrated. Each slot-in is supplied with an A and B feed (redundancy). With max. 250 A per phase one single rack can provide loads of up to 346 kVA. Plug & Play: only the main feed on the rack must be installed by an electrician. The individual slot-in units and the PDUs can be connected per Plug & Play installation, making later extensions costeffective. Slot-in units with measurement function are also available. This slot-in unit allows you to measure and moni- 34 tor the electrical measured variables at the early main distributor stage. This slot-in unit will replace standard analog volt and ampere meters and measuring devices for power outputs and power factor. The required measured variables can be “customized” in six display panels. The system can also be connected to an LAN. The measured values are then displayed and saved on a PC in the LAN or on the Internet. Q Clear and transparent displays. Q Customized setting of measured variables for standard displays. Q Wide range of application with ﬂexible adjustment of input variables. Q Connection error detection with installation. Q Communication with LAN enables integration into energy management. Q Easy reading and display of measured data with MS Excel allows the user to ﬂexibly conﬁgure their own solutions. Equipping and installation The outputs of the slot-in units can be ﬂexibly equipped as the customer wishes with the most diverse features: different CEE and GST18 type plug connections (e. g. Adaptive, Managed and Basic PDUs and ﬂexible power distribution with the GST18i5 distributor block, 3-phase). Measurement slot-in unit with extensive measurement functions (local or remote) Can be integrated into various management programs. INPUT POWER Q Max. 250 A per phase Q 1 ph. or 3 ph. Feed Q Max. 2 feeds per rack OUTPUT DISTRIBUTOR Q 230/400V - 32A via IEC 60309 socket Q 230/400V - 16A via GST 18 socket Q 230V - 32A via IEC 60309 socket MODULARITY Q Output distributors can be modularly equipped during running operation. 10.3A 1-1 MONITORING Q Power Trans Rack complete and each individual slot-in and output. 119.5V 4.32kW 5.17kVA 12345 1-1 10.3A 119.5V 4.32kW 5.17kVA 12345 LOCAL MONITORING Q Display for user Q Display at rack level and at slot-in level/output level REMOTE MONITORING Q Secure web and SNMP interface OVERLOAD PROTECTION Q Circuit breakers for every output Knürr PowerTrans® for professional power distribution in the data center. 35 References: Secure, stable and highest possible measurement accuracy Several renowned companies quickly opted for the Liebert MPXTM modular power supply. We not only consider the individual servers that the PDUs are connected to – together with the customer we also keep a keen on on the complete solution. Automotive manufacturer "A standardized system on which different solutions can be set up is important for us. As the same busbar is always used, we don't have to think about possible requirements in the preliminary stage. Every customer has different challenges and requires a solution harmonized with their needs. The following examples show how different the customer's individual requirements are and how these have been met with our solutions. We have racks with which it is only the overall consumption we are interested in. On the other hand there are servers with which we also have to note the exact consumption. The ability to select the different modules allows us to equip the busbars as required. Existing racks in the data center will also be integrated into the management system. With the "IMS Liebert MPX" Inline Metering System we can easily integrate these racks into the existing management platform, as the same communication card as with the MPH/ MPX is installed in this product. This 36 allows all features to be used together (e.g. external sensors, rack PDU array, external display)." Stock exchange trading "The power values of each individual server have to be measured – and with the highest possible accuracy. This is why we equip the busbars with the "Receptacle Managed" output modules, which have an individual port measurement with an industrywide highest measurement accuracy of +/-1%. The data interface to the outside must communicate with an "open" protocol, so that the PDU can be integrated into the existing management software. Ready to use plug-ins also allow the PDU to be integrated into open management platforms, such as Nagios, for example." Modular power supply in data centers in stock exchange trading ensures reliability. References: Space-saving and standardized system University data center manager "We operate a cluster computer here, and we provide its computing performance to various third level education institutes. For us the most important thing is to get as much computing power as possible for as little money as possible, and nevertheless ensure a secure operation. As we have to distribute the computer's operational costs among the individual institutes, we use socket strips with measurement modules that we can retrieve via the network. Recently there have been more and more failures here due to the high temperatures at the back of the racks. For a couple of months now we have been using the MPH from Liebert, which is signiﬁcantly more temperature-stable than other products on the market – and now there are no problems. Plus the price is right and the measurement accuracy is ﬁrst class." DC infrastructure manager of a large housing/collocation provider "When we set up the infrastructure in a DC module we don't know yet what equipment our customers are going to bring into the equation. 38 This isn't a problem for the server racks; the installation dimensions are standardized – we can use standard racks any time and are therefore ready for everything. It's not the same with power distributor strips however; there are too many different connector plugs. Until now we were always obliged to swap out complete distributor strips whenever a customer brought in new equipment. This always entailed very high costs because the entire power cabling had to be laid again right up to the busbars. We have now decided for Liebert MPX so that we can adjust the power distribution in the rack to the respective requirements by simply changing the output modules. We were also really impressed here by the fact that the busbars and housings are made of very robust aluminum and easily survive numerous swap-outs undamaged. Another important aspect for us is the exceptional accuracy of the power measurement, as we invoice the power costs individually to our customers." State IT center (modular IMS) "Electrical data has to be recorded in the data centers with up to 4 feeds. The data has to be collected and analyzed centrally in databases. Existing comprehensive management platforms must also be able to access the data. Alarms have to be signaled to the existing alarm management. 400 racks are currently distributed over 3 sites. Current, voltage, power and temperature per rack have to be recorded. The feed is ﬂexible, from 16A 1ph to 63A 3ph. An open protocol (SNMP) and ﬂoating contacts must be provided to the outside so that the data and alarms can be processed. We are constantly growing, so the installation has to be set up extremely ﬂexible and modular. The Knürr IMS modular system is the best solution for our applications, as our business is very dynamic. Modularity and ﬂexibility are therefore very important for us." SmartAisleTM from Emerson Network Power – Cold aisle containment at the highest possible technical level in the modern data center. System solutions 1. MONITOR – Early failure detection for more security Identify faults early on with comprehensive and early-detection monitoring of numerous measured values (N-conductor current, crest factor, power factor, apparent power) N-conductor current monitoring example: The supply in the rack is 3-phase. With unbalanced load the N-conductor is stressed. An unbalanced load occurs when at least one phase is loaded more than the others. If an unbalanced load is too high the connection cable can heat up, as the N-conductor is not conﬁgured higher than the other wires in the cable. To prevent this the standard software of the Liebert MPXTM has two threshold values for the current in the N-conductor. When server 2 is switched on the "N-current pre-warning" limit value is exceeded; a signal is sent. When the third server is switched on the "N-current alarm" limit value is exceeded; a signal is sent. All signals are shown on the web interface and also forwarded to the management software. Server 3 is switched on N-current alarm N-current pre-warning Server 1 running 40 Server 2 is switched on Backing up business-critical IT applications based on technology and experience: Emerson Network Power. System solutions 2. CONTROL – Execute control commands at low cost Execute control commands when speciﬁ ﬁcc incidents occur Different sensors can be connected to the Liebert MPXTM. The incidents occurring (e.g. g. excess temperature, alarm signals from exterternal components, etc.) can be displayed in the he software, and also forwarded to the respective ctive management software. Speciﬁc control commmands can also be executed. Example: A temperature sensor and a ﬂoating ting input contact can be connected to the Liebert bert MPXTM. With excess temperature a signal is sent so that the thermal management system em increases the power. The Liebert Nform mananagement software also forwards a switching ng command to the Liebert MPXTM to switch on n the signal lights. A ﬂoating input contact is connected to a re smoke detector. If this goes off the doors are opened automatically and an alarm is forwarded to the management software. 42 3. SECURE – Guarantee security with a better overview Guarantee security With a fully ﬁtted rack (36 servers are ﬁxed per side on the Liebert MPXTM) a technician must remove a server and disconnect the mains cable. Solution: Each individual server is labeled with a name in the Liebert MPXTM software. With a click on the button in the software the respective LED beside the server's mains cable ﬂashes. The technician sees immediately which mains cable they can disconnect. 43 TrinergyTM from 200 to 1200 kW A revolutionary high performance UPS with dynamic operating modes, scalability up to 9.6 MW and 99% efficiency. TrinergyTM provides optimum performance and reliability with drastically reduced total operating costs (TCO). Highest UPS level of efﬁciency, up to 99 % Q Interface for power feed on the bypass. Q Real-time input power tracking. Q Intelligent algorithm for mode change. 3-dimensional modularity Thanks to TrinergyTM three-dimensional modularity, companies can always extend their UPS infrastructure whenever changing load requirements demand it. Further power modules are simply added! Up to 9.6 MW effective power can consequently be reached – an unprecedented power level. 44 A ﬁrst in the industry TrinergyTM, the revolutionary UPS architecture is based on the fact that three standard operating conﬁgurations are combined for the ﬁrst time in one single high power UPS: Q Maximum power control (VFI) Q Maximum energy savings (VFD) Q High efﬁciency level and optimum power conditioning (VI) The unique TrinergyTM technology mix enables the system to monitor the environment and the network's operating conditions, and to independently select the operating mode that is best suited for the power conditions. TrinergyTM can determine the most efﬁcient operating mode for the respective network conditions and ensures the consumer supply is optimum at all times. The system consequently achieves exceptional energy savings, a ﬁrst class power level and maximum security with power supply.1 The TrinergyTM high level of ﬂexibility, energy efﬁciency and adaptability are in harmony with the "Best Practice Strategies" in data centers and another conﬁrmation of its outstanding efﬁciency. Features Q Transformer-free system setup. Q Comprehensive IGBT double converter technology. Q Excellent input power - PF > 0.99 - THDi < 3% Q Output PF up to 1. Q Diagram of the output power factor symmetrically referring to zero point. Q Permanent 100 % kVA – no power reduction, regardless of the load (capacitive or inductive). Q Optimum ratio between space requirement and power. Q Automatic output power increase by up to +10 %. Q High conversion efﬁciency (certiﬁed up to 99%). 1) Class 1 IEC 62040-3) CBEMA TrinergyTM – Unique architecture and technology. 45 Emerson Network Power Centers of Expertise When you partner with Emerson Network Power for your Business-Critical Continuity™ needs across your enterprise, you beneﬁt from more than products to support and protect your technology infrastructure. Developing such a wide range of technologies gives us in-depth industry knowledge and a “bigpicture” understanding of how all systems must work together within any critical environment. We deliver this knowledge through Emerson Network Power’s Centers of Expertise, distinct areas of world-class products and services that help you determine what you need and where, depending on your application. All so that you can keep your business moving forward for your customers. 46 AC Power Sustaining critical operations that simply can’t go down. We deliver a full range of uninterruptible Liebert® and Chloride AC power systems plus STS devices, providing from individual products to integrated power protection solutions, that keep network closets, computer rooms and data centers up and running. Infrastructure Management & Monitoring Managing and monitoring critical environments at multiple sites around the clock. We make it easy in today’s ROI-driven business environment, with comprehensive infrastructure management and monitoring systems for both IT and facilities. Solutions and services that provide continuous oversight of data centers, computer rooms and network closets, as well as wireless, wireline and enterprise telecom applications. Power Switching & Controls Safeguarding facilities from operational disruption due to electrical power interruption. We provide ASCO® power-transfer switches, generator paralleling switchgear/ power control systems, and touch screen SCADA for monitoring and control of the utility service and on-site backup power generators, helping ensure continuity of supply to essential and mission-critical communications, data-processing, lifesafety, and other critical loads. Backed by the largest manufacturers, direct ﬁeld based project management and service technicians in the industry. Service Precision Cooling Maintaining precise temperature for reliable equipment performance. We deliver “rack-to-roof” cooling, the most comprehensive range of Liebert® precision cooling solutions, which protect mission-critical applications from even the slightest increase in temperature, adopting cutting-edge technologies to achieve the highest efﬁciency. Racks & Solutions Optimizing technology and performance needs for indoor IT applications. We deliver standard and customized integrated cabinet solutions that meet unique and speciﬁc needs, from Knürr and Liebert® rack solutions for computer rooms of all sizes to integrated racks that include self-contained air conditioning, UPS and cable management in a sturdy, lockable cabinet. Surge Protection Defending power, voice and data moving through the network against grid irregularities and dangerous electrical disturbances. Depending on the application, we offer Liebert® and PowerSure™ AC Power Protection, Islatrol™ Active Tracking Filters and Edco™ data/signal surge protective devices, all of which provide power protection to reduce downtime, saving crucial man-hours and extending equipment life. Services Delivering assessment, testing and reliability programs backed by the largest global services organization in the industry. We encompass engineering, installation, startup services, project management, training, and total on-site operations management, preventive and predictive maintenance and energy consumption monitoring. Emerson Network Power supports Business-Critical Continuity™ with the largest global services organization in the industry and a service offering dedicated to entire critical infrastructure, delivering: • Design, installation and startup • Warranty service • Preventive maintenance • 24/7 remote monitoring • Emergency service • Site audits Service contracts Regular service of business critical infrastructure provides uptime assurance and reduces the total cost of ownership over the life of equipment. A service contract ensures that infrastructure is regularly maintained in order to avoid unexpected, costly downtime. Emerson Network Power service contracts cover all technologies and can be tailored to suit individual business needs. LIFETM.net Maximized system availability via real-time diagnosis and resolution of operating anomalies • 24-hour real-time monitoring by expert engineers. • Monitoring and trending of system data. • Diagnosis through expert data analysis allowing effective proactive maintenance and prevention of future anomalies. • Alarm notiﬁcation. • On-site corrective maintenance dispatching. 47 Emerson Network Power Data Center Infrastructure for Large Applications Precision Cooling SmartAisleTM • Aisle containment. • Provides highest energy efﬁciency. • Works with any Liebert® Cooling Unit. • Control works with any Liebert® Coling Unit. Liebert PCW/Liebert® HPM From 4 kW to 230 kW, DX-Digital Scroll-CW. • Premium energy efﬁciency. • Eurovent certiﬁed performance. • Unique control capabilities with iCOM. Liebert® HPC Freecooling Chiller Wide range of high- efﬁciency freecooling chillers from 40 kW to 1600 kW. • Designed speciﬁcally for data center applications and to work with SmartAisleTM. • Premium energy efﬁciency version. • iCOM control featured. Liebert® CRV • Row-based high efﬁciency precision cooling units available in DX or CW versions. • Decoupled control for airﬂow and cooling capacity. • Modulating cooling capacity with digital scroll. • iCOM control with remote rack sensors. Liebert® XD • Refrigerant based high density cooling installed close to the server. • Hot spot management for up to 30 kW per rack. • On-demand upgrade with plug and play. • High efﬁciency and 100% sensible cooling. Chloride CROSS • Ensures redundant power for critical loads, switching between two independent power sources. • Solid-state transfer switch available as 2/3/4P versions with full PF range to guarantee compatibility with all load types. • Extremely reliable and ﬂexible architecture. Racks & Solutions Knürr CoolTherm® 4–35 KW Energy efﬁcient server cabinet technology • Signiﬁcant Total Cost of Ownership (TCO) reduction. • Autonomous server rack; independent from environmental conditions. • Up to 30% improved cooling system energy efﬁciency. Knürr DCD Passive chilled water heat exchanger • Cools up to 30 kW. • Neutralizes room heat. • Fits to Knürr and third party products. Knürr Miracel®/Knürr DCM® Global rack platform for data centers, networks and telecommunications • Lightweight aluminum frame. • T-slot system. • Simple cable management. • Holds up to 1,500 kg. Knürr DCL Up to 34kW in the row cooling unit • Design for rack and row cooling. • Fail save controller design. Knürr Power Distribution Rack Central connection unit for power supplies in individual server racks • Interface between the low voltage feed and PDU. • Individual plug-in units. • Up to 346 kVA/Rack. AC Power Trinergy™ • Dynamic functioning modes (VFI, VI, VFD) with average working efﬁciency of 97.9%. • Three dimensions of modularity for optimum scalability (up to 9.6 MW). • Maximum availability as a result of internal redundancy and concurrent maintainability. Liebert® NXL • UPS for critical high power applications. • Provides greater power capacity along with superior reliability. • Meets power requirements and energy efﬁciency in high availability data centers. 48 Rack PDU Rack-based power distribution units • Supports strip-level metering, outlet-level switching and outletlevel metering/switching for remote power management and control. • Horizontal and vertical models for a variety of rack conﬁgurations in branch and remote ofﬁces. Surge Protection Liebert® TVSS • Easily connected to UPS, to distribution panels or at the service entrance of facilities. • Surge Protective Devices (SPD) designed to protect sensitive equipment from damaging transient voltage surges. Power Switching & Controls ASCO Series 7000 PCS Paralleling, synchronization and distribution of on-site Emergency Power • Integrated touch screen SCADA, redundant PLCs; control & monitor power distribution to critical loads. • Historical alarm recording, multi trending, Building Management System communication. Infrastructure Management & Monitoring Avocent® MergePoint Unity™ Appliance Secure remote KVM over IP access to servers • Secure remote access to servers in data centers and branch ofﬁces. • Using both in-band and out-ofband tools together allows for a more ﬂexible and complete, remote management solution. Avocent® Universal Management Gateway Appliance Infrastructure management appliance for IT and facilities • Real-time data collection and integrated monitoring for the Trellis Suite. • Access and control of IT equipment using KVM, serial, or embedded technology (autosensing ports). Avocent® ACS Advanced Console Server Secure remote serial over IP access to console devices • Remotely connect to servers, blades, routers. • Built in redundancy and conﬁgurable pin-outs for serial ports. Alber Battery Monitoring • Monitors batteries and prevents premature battery failures. • Internal DC resistance test method to eliminate uncertainty. • Much like a battery ultrasound, it enables the user to assess the battery’s true condition. Knürr Synergy® Supports monitoring in any control room with consoles, monitoring walls and mobile charts • Standards compliance and ergonomics. • Manual height selection, even in the basic version. • Modular construction. Avocent® DSView 4 Management Software Centralized data center management • Remote access and management of all physical and virtual data center assets. • Secure, out-of-band, centralized management of all connected IT and network devices in dispersed data centers. 1 4 6 4 1 5 3 2 Avocent® Rack Power Manager Detailed power and environmental information and control • Full power monitoring by outlet, rack, PDU, row of racks, custom groups or entire data centers. • Monitors/measures IT energy consumption, and determines data center costs/trends. Avocent® Data Center Planner™ A visual infrastructure planning and management product • Increases accuracy and reduces time required to complete infrastructure audits. • Decreases installation and decommissioning errors. • Reduces time to provision and install equipment. • Enables upfront analysis on impact of changes before committing resources. The Trellis™ platform The Trellis platform uniﬁes facilities and IT infrastructure with real-time data and insights like no other solution on the market • Manages critical infrastructure in real-time by operating equipment at the optimal threshold and improving energy efﬁciency. • Increases operational efﬁciency across the business. • Single platform reduces administrative costs and provides faster ROI. • Defers/eliminates capital expenditures by operating equipment at the optimal threshold without compromising availability. 1 AC Power 4 Precision Cooling 2 Infrastructure Management & Monitoring 5 Racks & Solutions 3 Power Switching & Controls 6 Surge Protection 49 Emerson Network Power Container data center infrastructure Cabling/pipework tray Liebert APM Liebert CRV Knürr DCM Liebert Nform Avocent Remote Infrastructure Management Liebert HCR Emerson Network Power makes the Business Continuity™ mobile with its innovative Container data center infrastructure: Disaster recovery, humanitarian actions with natural disasters, sports events, ﬁlm productions or simple data center extensions – all at no construction cost: the Emerson Network Power mobile infrastructure meets all Business-Critical Continuity™ requirements. Emerson Network Power once again proves that maximum efﬁciency is possible with this effective "All-in-one” solution for all standard and special situations! The Container data center infrastructure is mobile and provides complete, efficient protection for IT infrastructures 50 that support operational processes, with both standard and special requirements. The Container can be conﬁgured for speciﬁc customer requirements and transported anywhere to support the efﬁciency of stationary or temporary operations rooms. The beneﬁts of data centers designed for fast site relocation are: IT environment protection without impairing computing performance, continuous power management during an emergency situation and provision of a ready-to-operate integrated platform, which can be quickly activated. The internal infrastructure includes all available innovative solutions: racks from Knürr, UPS units from Liebert and power distribution units and precision cooling units from Emerson Network Power. The layout is supplemented by infrastructure management solutions and monitoring software from Avocent. For a virtual view of the Container solution go to: www.datacenterinfrastructure.eu Emerson Network Power Innovative technologies that provide our customers clear competitive beneﬁts IT managers in data centers and companies are faced with constantly growing challenges: increasingly denser IT infrastructures, heterogeneous manufacturer and component landscapes for critical equipment (power supply, cooling, cabling, racks) and rising energy efﬁciency requirements. Emerson Network Power provides integrated and ready-made IT solutions for small and medium-sized enterprises. Our racks, UPSs, cooling systems, power distribution systems and cable management solutions are supported by reliable monitoring systems and therefore form the ideal solution for setting up futureproof data centers. Nowadays successful companies depend on adjustable technologies so they pe ca can react quickly to new market requireme ments. Your data center's support infrastr structure must be able to support new IT de developments such as virtualization and co consolidation, and their power supply an and cooling requirements. All changes, rel relocations or extensions of your IT have an effect on the entire support infrastr structure. You therefore require produc ucts and support that guarantee reliable op operation of your IT systems in these en environments. Yo will find more information You online at: on www.EmersonNetworkPower.eu 51 As at: September 2012/ Version 1.0 The company provides new-to-the-world solutions, as well as established expertise and smart innovation in areas including AC and DC power and renewable energy, precision cooling systems, infrastructure management, embedded computing and power, integrated racks and enclosures, power switching and controls, and connectivity. Our solutions are supported globally by local Emerson Network Power service technicians. Learn more about Emerson Network Power products and services at Locations Emerson Network Power - EMEA Racks and Solutions Knürr GmbH Mariakirchener Straße 38 94424 Arnstorf • Germany T +49 8723 27 0 F +49 8723 27 154 [email protected] Emerson Network Power - USA 1050 Dearborn Drive P.O. Box 29186 Columbus, Ohio 43229 T +1 614 8880246 Emerson Network Power - Asia 7/F, Dah Sing Financial Centre 108 Gloucester Road, Wanchai Hong Kong T +852 2572220 F +852 28029250 www.EmersonNetworkPower.com While every precaution has been taken to ensure accuracy and completeness of this literature, Emerson Network Power and/or its afﬁliates makes no representations or warranty about the accuracy, reliability, completeness, or timeliness of the materials and disclaims any and all liability for damages resulting from use of this information or for any errors or omissions. ©2012 Emerson Network Power. All rights reserved. Speciﬁcations subject to change without notice. Emerson Network Power The global leader in Business-Critical Continuity™. AC Power Connectivity DC Power Embedded Computing Embedded Power Infrastructure Management & Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Solutions Services Surge Protection Emerson, Business-Critical Continuity and Emerson Network Power are trademarks of Emerson Electric Co. or one of its affiliated companies. ©2012 Emerson Electric Co. 09.997.984.9 • 1OR711 • Subject to technical changes, errors and omissions. Emerson Network Power, a business of Emerson (NYSE:EMR), protects and optimizes critical infrastructure for data centers, communications networks, healthcare and industrial facilities.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project