null  null
2
© Siemens AG 2015
LOGO! logic module
2/2
Introduction
2/3
2/3
2/9
2/11
2/15
2/17
2/27
LOGO! modular
LOGO! modular basic variants
SIPLUS LOGO! modular basic variants
LOGO! modular pure variants
SIPLUS LOGO! modular pure variants
LOGO! modular expansion modules
SIPLUS LOGO! modular expansion
modules
2/30
2/30
2/31
2/33
2/37
LOGO! modular communication modules
LOGO! CM EIB/KNX communication
modules
LOGO! CSM unmanaged
LOGO! CMR (wireless communication)
AS-Interface connection for LOGO!
2/38
LOGO!Power
2/49
SIPLUS LOGO!Power
2/50
LOGO!Contact
2/51
LOGO! Software
2/52
2/52
SIPLUS add-ons
SIPLUS LOGO! PROM
Brochures
For brochures serving as selection
guides for SIMATIC products refer to:
www.siemens.com/simatic/
printmaterial
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
Introduction
LOGO! logic module
■ Overview
■ General technical specifications SIPLUS LOGO!
2
Ambient temperature range
-40/-25 ... +70 °C
Conformal coating
Coating of the printed circuit boards
and the electronic components
Technical data
The technical data of the standard
product applies except for the
ambient conditions.
Ambient conditions
Extended ambient conditions
• Relative to ambient temperatureatmospheric pressure-installation
altitude
LOGO! logic module
• The compact, easy-to-use and low-cost solution for simple
control tasks
• Compact, easy to operate, universally applicable without
accessories
• "All in one": Integrated display and operator panel
• 36 different functions can be connected at the click of a button
or by means of PC software; up to 130 times over
• LOGO! 8: 38 / 43 different functions can be linked at the press
of a button or using PC software; up to 200/400 times
• Functions are easily changed at the press of a key. No more
time-consuming rewiring
SIPLUS LOGO!
• The controller for use in the toughest environmental conditions
• With extended temperature range from -40/-25 °C to +70 °C
• Suitable for medial exposure (harmful gas atmosphere)
• Condensation permissible
• With the proven PLC technology of LOGO!
• Easy to handle, program, maintain, and service
• Ideal for use in automotive engineering, environmental
engineering, mining, chemical plants, material handling, food
industry, etc.
Accessories:
• The front panel mounting set also allows simple and reliable
installation of the logic modules in front panels; IP65
protection is thus possible.
• In order to ensure dependable operation of SIPLUS devices
supplied by the battery in conjunction with combustion
engines, it is necessary to put in a SIPLUS upmiter upstream
device between the battery and the SIPLUS LOGO!.
For further information, please go to:
http://www.siemens.com/siplus-extreme
2/2
Siemens ST 70 · 2015
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Relative humidity
• With condensation, max.
100 %; Relative humidity, incl.
condensation / frost permitted
(no commissioning under
condensation conditions)
Resistance
• against biologically active
substances / conformity with
EN 60721-3-3
Yes; Class 3B2 mold, fungus and dry
rot spores (with the exception of
fauna). The supplied connector
covers must remain on the unused
interfaces during operation!
• against chemically active
substances / conformity with
EN 60721-3-3
Yes; Class 3C4 incl. salt spray. The
supplied connector covers must
remain on the unused interfaces
during operation!
• against mechanically active
substances / conformity with
EN 60721-3-3
Yes; Class 3S4 incl. sand, dust. The
supplied connector covers must
remain on the unused interfaces
during operation!
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular basic variants
■ Overview
• The space-saving basic variants
• Interface for the connection of expansion modules,
up to 24 digital inputs, 20 (16) digital outputs, 8 analog inputs
and 8 (2) analog outputs can be addressed
• With connection option for LOGO! TD text display (can be
connected to all LOGO! 0BA6 and 0BA7 basic versions);
LOGO! TDE can be connected with LOGO! 8 or higher
New for LOGO! 8
• All basic units with integrated web server
• Same enclosure width as LOGO! 0BA6 (4 MW)
• All basic units with Ethernet interface for communication with
LOGO!, SIMATIC Controllers, SIMATIC Panels and PCs
• Use of standard micro CF cards
LOGO! 0BA7 versions:
• Ethernet interface for communication with SIMATIC Controller,
SIMATIC Panel and PC
• Networking of max. 8 LOGO! devices
• Use of standard CF card or SIMATIC memory card
■ Technical specifications
Article number
6ED1052-1CC01-0BA8
6ED1052-1MD00-0BA8
6ED1052-1HB00-0BA8
6ED1052-1FB00-0BA8
LOGO! 24CE,
8DI(4AI)/4DO,
400 BLOCKS
LOGO!12/24RCE,
8DI(4AI)/4DO,
400 BLOCKS
LOGO! 24RCE,
8DI/4DO,
400 BLOCKS
LOGO!230RCE,
8DI/4DO,
400 BLOCKS
on 35 mm DIN rail,
4 spacing units wide
on 35 mm DIN rail,
4 spacing units wide
on 35 mm DIN rail,
4 spacing units wide
on 35 mm DIN rail,
4 spacing units wide
Product type designation
Installation type/mounting
Mounting
Supply voltage
Rated value (DC)
• 12 V DC
• 24 V DC
Yes
Yes
Yes
Yes
• 115 V DC
Yes
Yes
• 230 V DC
permissible range, lower limit (DC)
20.4 V
10.8 V
20.4 V
100 V
permissible range, upper limit (DC)
28.8 V
28.8 V
28.8 V
253 V
Rated value (AC)
• 24 V AC
Yes
• 115 V AC
Yes
• 230 V AC
Yes
Time of day
Time switching clocks
• Number
190
8
8
8
• Power reserve
480 h
480 h
480 h
480 h
Digital inputs
Number of digital inputs
8; Of which 4 can be used in 8; Of which 4 can be used in 8
analog mode (0 to 10 V)
analog mode (0 to 10 V)
8
Number of digital outputs
4; Transistor
4; Relays
4; Relays
4; Relays
short-circuit protection
Yes; electrical (1 A)
No; external fusing
necessary
No; external fusing
necessary
No; external fusing
necessary
0.3 A
10 A
Digital outputs
Output current
• for signal "1" permissible range for
0 to 55 °C, max.
Relay outputs
Switching capacity of contacts
- with inductive load, max.
3A
3A
3A
- with resistive load, max.
10 A
10 A
10 A
Siemens ST 70 · 2015
2/3
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular basic variants
■ Technical specifications (continued)
Article number
6ED1052-1CC01-0BA8
6ED1052-1MD00-0BA8
6ED1052-1HB00-0BA8
6ED1052-1FB00-0BA8
LOGO! 24CE,
8DI(4AI)/4DO,
400 BLOCKS
LOGO!12/24RCE,
8DI(4AI)/4DO,
400 BLOCKS
LOGO! 24RCE,
8DI/4DO,
400 BLOCKS
LOGO!230RCE,
8DI/4DO,
400 BLOCKS
Yes; Radio interference
suppression according to
EN 55011,
Limit Value Class B
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CSA approval
Yes
Yes
Yes
Yes
UL approval
Yes
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
0 °C
• max.
55 °C
55 °C
55 °C
55 °C
Width
71.5 mm
71.5 mm
71.5 mm
71.5 mm
Height
90 mm
90 mm
90 mm
90 mm
Depth
60 mm
60 mm
60 mm
60 mm
Article number
6ED1052-1MD00-0BA7
6ED1052-1FB00-0BA7
LOGO!12/24RCE, 8DI(4AI)/4DO, 400 BLOCKS
LOGO! 230RCE, 8DI/4DO, 400 BLOCKS
on 35 mm DIN rail, 6 spacing units wide
on 35 mm DIN rail, 6 spacing units wide
2
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
Standards, approvals, certificates
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
Product type designation
Installation type/mounting
Mounting
Supply voltage
Rated value (DC)
• 12 V DC
Yes
• 24 V DC
Yes
• 115 V DC
Yes
Yes
• 230 V DC
permissible range, lower limit (DC)
10.8 V
100 V
permissible range, upper limit (DC)
28.8 V
253 V
Rated value (AC)
• 115 V AC
Yes
• 230 V AC
Yes
Time of day
Time switching clocks
• Number
333
333
• Power reserve
480 h
480 h
8; Of which 4 can be used in analog mode (0 to 10 V)
8
Number of digital outputs
4; Relays
4; Relays
short-circuit protection
No; external fusing necessary
No; external fusing necessary
- with inductive load, max.
3A
3A
- with resistive load, max.
10 A
10 A
Digital inputs
Number of digital inputs
Digital outputs
Relay outputs
Switching capacity of contacts
2/4
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular basic variants
■ Technical specifications (continued)
Article number
6ED1052-1MD00-0BA7
6ED1052-1FB00-0BA7
LOGO!12/24RCE, 8DI(4AI)/4DO, 400 BLOCKS
LOGO! 230RCE, 8DI/4DO, 400 BLOCKS
Yes; Radio interference suppression according to
EN55011, Limit Value Class B
Yes; Radio interference suppression according to
EN55011, Limit Value Class B
Yes
Yes
CSA approval
Yes
Yes
UL approval
Yes
Yes
FM approval
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
• max.
55 °C
55 °C
Width
107 mm
107 mm
Height
90 mm
90 mm
Depth
55 mm
55 mm
Article number
6ED1052-1CC01-0BA6
6ED1052-1MD00-0BA6
LOGO! 24C, 8DI(4AI)/4DO,
200 BLOCKS
LOGO! 12/24RC,
LOGO! 24RC, 8DI/4DO,
8DI(4AI)/4DO, 200 BLOCKS 200 BLOCKS
LOGO! 230RC, 8DI/4DO,
200 BLOCKS
on 35 mm DIN rail,
4 spacing units wide
on 35 mm DIN rail,
4 spacing units wide
on 35 mm DIN rail,
4 spacing units wide
2
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
Standards, approvals, certificates
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
6ED1052-1HB00-0BA6
6ED1052-1FB00-0BA6
Product type designation
Installation type/mounting
Mounting
on 35 mm DIN rail,
4 spacing units wide
Supply voltage
Rated value (DC)
• 12 V DC
• 24 V DC
Yes
Yes
Yes
Yes
• 115 V DC
Yes
Yes
• 230 V DC
permissible range, lower limit (DC)
20.4 V
10.8 V
20.4 V
100 V
permissible range, upper limit (DC)
28.8 V
28.8 V
28.8 V
253 V
Rated value (AC)
• 24 V AC
Yes
• 115 V AC
Yes
• 230 V AC
Yes
Time of day
Time switching clocks
• Number
190
8
8
8
• Power reserve
80 h
80 h
80 h
80 h
Digital inputs
Number of digital inputs
8; Of which 4 can be used in 8; Of which 4 can be used in 8
analog mode (0 to 10 V)
analog mode (0 to 10 V)
8
Siemens ST 70 · 2015
2/5
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular basic variants
■ Technical specifications (continued)
Article number
2
6ED1052-1CC01-0BA6
6ED1052-1MD00-0BA6
LOGO! 24C, 8DI(4AI)/4DO,
200 BLOCKS
LOGO! 12/24RC,
LOGO! 24RC, 8DI/4DO,
8DI(4AI)/4DO, 200 BLOCKS 200 BLOCKS
6ED1052-1HB00-0BA6
6ED1052-1FB00-0BA6
LOGO! 230RC, 8DI/4DO,
200 BLOCKS
Number of digital outputs
4; Transistor
4; Relays
4; Relays
4; Relays
short-circuit protection
Yes; electrical (1 A)
No; external fusing
necessary
No; external fusing
necessary
No; external fusing
necessary
- with inductive load, max.
3A
3A
3A
- with resistive load, max.
10 A
10 A
10 A
Yes; Radio interference
suppression according to
EN 55011,
Limit Value Class B
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CSA approval
Yes
Yes
Yes
Yes
UL approval
Yes
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
0 °C
• max.
55 °C
55 °C
55 °C
55 °C
Width
72 mm
72 mm
72 mm
72 mm
Height
90 mm
90 mm
90 mm
90 mm
Depth
55 mm
55 mm
55 mm
55 mm
Digital outputs
Output current
• for signal "1" permissible range for
0 to 55 °C, max.
0.3 A
Relay outputs
Switching capacity of contacts
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
Standards, approvals, certificates
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
2/6
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular basic variants
■ Ordering data
Article No.
LOGO! 8 logic module
LOGO! 24CE
LOGO! 6 logic module
6ED1052-1CC01-0BA8
Supply voltage 24 V DC,
8 digital inputs 24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 digital outputs 24 V DC, 0.3 A,
integrated time switch
Ethernet interface;
400 function blocks can be
interlinked,
modular expansion capability
LOGO! 12/24RCE
LOGO! 12/24RC logic module
6ED1052-1MD00-0BA8
6ED1052-1HB00-0BA8
6ED1052-1FB00-0BA8
6ED1052-1HB00-0BA6
6ED1052-1FB00-0BA6
115/230 V AC/DC power supply,
8x 115/230 V AC/DC digital inputs,
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
Accessories for LOGO! 8
LOGO! 8 text display HMI
LOGO! 7 logic module
6ED1052-1MD00-0BA7
Supply voltage 12/24 V DC,
8 digital inputs 12/24 V DC, of
which 4 can be used in analog
mode (0 to 10 V)
4 relay outputs 10 A,
integral time switch;
400 function blocks can be
interlinked,
Ethernet interface,
modular expansion capability
LOGO! 230RCE logic module
6ED1052-1MD00-0BA6
24 V AC/DC power supply,
8x 24 V AC/DC digital inputs,
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
LOGO! 230RC logic module
Supply voltage 115...230 V AC/DC,
8 digital inputs 115...230 V AC/DC,
4 relay outputs 10 A,
integral time switch
Ethernet interface;
400 function blocks can be
interlinked,
modular expansion capability
LOGO! 12/24RCE logic module
2
6ED1052-1CC01-0BA6
12/24 V DC power supply,
8x 12/24 V DC digital inputs, of
which 4 can be used in analog
mode (0 to 10 V)
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
LOGO! 24RC logic module
Supply voltage 24 V AC/DC,
8 digital inputs 24 V AC/DC,
4 relay outputs 10 A,
integral time switch
Ethernet interface;
400 function blocks can be
interlinked,
modular expansion capability
LOGO! 230RCE
LOGO! 24C logic module
24 V DC supply voltage,
8 digital inputs 24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 digital outputs 24 V DC, 0.3 A,
integrated time switch;
200 function blocks can be
interlinked,
modular expansion capability
Supply voltage 12...24 V DC,
8 digital inputs 12/24 V DC, of
which 4 can be used in analog
mode (0 to 10 V)
4 relay outputs 10 A,
integral time switch
Ethernet interface;
400 function blocks can be
interlinked,
modular expansion capability
LOGO! 24RCE
Article No.
6ED1055-4MH00-0BA1
6-line text display, can be
connected to all LOGO! 8 Basic
and Pure versions, with 2 Ethernet
interfaces; including installation
accessories.
Requires additional 12 V DC or
24 V AC/DC power supply
LOGO!Soft Comfort V8
6ED1058-0BA08-0YA1
For programming on the PC in
LAD/FBD; executes on Windows 8,
7, XP, Linux and Mac OSX; on DVD
LOGO!Soft Comfort V8 Upgrade
6ED1052-1FB00-0BA7
6ED1058-0CA08-0YE1
Upgrade from V1.0 to V8, on DVD
115/230 V AC/DC supply voltage,
8 digital inputs 115/230 V AC/DC,
4 relay outputs 10 A,
integral time switch;
400 function blocks can be
interlinked,
Ethernet interface,
modular expansion capability
Siemens ST 70 · 2015
2/7
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular basic variants
■ Ordering data
2
Article No.
Article No.
LOGO! 8 Starter Kits
LOGO! Memory Card
In TANOS Box, with LOGO! 8,
LOGO! Soft Comfort V8,
WinCC Basic V13, Ethernet cable
Program module for copying, with
know-how protection
LOGO! 8 12/24 V Starter Kit
LOGO! battery card
6ED1057-3BA00-0AA8
With LOGO! 12/24RCE,
LOGO! Power 24 V 1.3 A
LOGO! 8 230V Starter Kit
LOGO! 8 TDE Starter Kit
LOGO! memory/battery card
6ED1057-3BA10-0AA8
Combined program and battery
module, with know-how protection
and backup of the integral real-time
clock (not LOGO! 24)
With LOGO! 12/24RCEO,
LOGO! Power 24 V, 1.3 A,
LOGO! TDE
LOGO! 8 KP300 Basic Starter Kit
LOGO! PROM
6AV2132-0HA00-0AA1
With LOGO! 12/24RCE,
LOGO! Power 24 V 1.3 A,
KP300 Basic mono PN
LOGO! 8 KTP400 Basic Starter Kit
With LOGO! 12/24RCE,
LOGO! Power 24 V 1.3 A,
KTP400 Basic
LOGO! 8 KTP700 Basic Starter Kit
With LOGO! 12/24RCE,
LOGO! Power 24 V 1.3 A,
KTP700 Basic
(extended temperature range
-10 ... +60 °C and medial loading)
4-line text display, can be
connected to all LOGO! Basic and
Pure versions as of -0BA6,
including connecting cable
2/8
Siemens ST 70 · 2015
6ED1058-0CA08-0YE1
6ED1057-1AA00-0BA0
For program transfer between
LOGO! and the PC
LOGO! USB PC cable
6ED1055-4MH00-0BA0
4-line text display, can be
connected to all LOGO! 0BA6
Basic and Pure versions, including
connecting cable
SIPLUS LOGO! TD text display
6ED1058-0BA08-0YA1
Upgrade from V1.0 to V8, on DVD
LOGO! PC cable
Accessories for
LOGO! 6, LOGO! 7
LOGO! TD text display
6AG1057-1AA01-0BA6
For programming on the PC in
LAD/FBD; executes on Windows 8,
7, XP, Linux and Mac OSX; on DVD
LOGO!Soft Comfort V8 Upgrade
6AV2132-3GB00-0AA1
6ED1056-7DA00-0BA0
Programming device used to
simultaneously reproduce program
module contents on up to
8 program modules
LOGO!Soft Comfort V8
6AV2132-0KA00-0AA1
6ED1056-6XA00-0BA0
Battery module for backing up the
integral real-time clock
(not LOGO! 24)
6ED1057-3BA02-0AA8
With LOGO! 230RCE
6ED1056-1DA00-0BA0
LOGO! modem cable
6AG1055-4MH00-2BA0
6ED1057-1AA01-0BA0
For transferring the program
between LOGO! and PC, including
driver on CD-ROM
6ED1057-1CA00-0BA0
Adapter cable for analog modem
communication
Front panel mounting set
Width 4 width units
6AG1057-1AA00-0AA0
Width 4 width units, with keys
6AG1057-1AA00-0AA3
Width 8 width units
6AG1057-1AA00-0AA1
Width 8 width units, with keys
6AG1057-1AA00-0AA2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
SIPLUS LOGO! modular basic variants
■ Overview
• The space-saving basic variants
• Interface for the connection of expansion modules, up to
24 digital inputs, 16 digital outputs, 8 analog inputs and
2 analog outputs can be addressed
• With connection option for LOGO! text display TD (can be
connected to all LOGO! 0BA6 basic versions)
New in LOGO! 0BA7 variants:
• Ethernet interface for communication with SIMATIC Controller,
SIMATIC Panel and PC
• Networking of max. 8 LOGO! devices
• Use of standard SD card or SIMATIC memory card
Note:
SIPLUS extreme products are based on Siemens Industry
standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific
information was added.
■ Technical specifications
Article number
6AG1052-1CC01-2BA6
6AG1052-1MD00-2BA6
6AG1052-1HB00-2BA6
6AG1052-1FB00-2BA6
Based on
6ED1052-1CC01-0BA6
6ED1052-1MD00-0BA6
6ED1052-1HB00-0BA6
6ED1052-1FB00-0BA6
SIPLUS LOGO! 24C
SIPLUS LOGO! 12/24RC
SIPLUS LOGO! 24RC
SIPLUS LOGO! 230RC
• Min.
-25 °C; = Tmin
-25 °C; = Tmin
-25 °C; = Tmin
-25 °C; = Tmin
• max.
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
Tmin ... Tmax
at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K)
at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K)
at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax
at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K)
at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K)
at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax
at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K)
at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K)
at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax
at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
- against biologically active
substances / conformity with
EN 60721-3-3
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
- against chemically active
substances / conformity with
EN 60721-3-3
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
- against mechanically active
substances / conformity with
EN 60721-3-3
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Ambient conditions
Ambient temperature in operation
Extended ambient conditions
• Relative to ambient temperatureatmospheric pressure-installation
altitude
Relative humidity
- With condensation, max.
Resistance
Siemens ST 70 · 2015
2/9
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
SIPLUS LOGO! modular basic variants
■ Technical specifications (continued)
2
Article number
6AG1052-1MD00-2BA7
6AG1052-1FB00-2BA7
Based on
6ED1052-1MD00-0BA7
6ED1052-1FB00-0BA7
SIPLUS LOGO!12/24RCE
SIPLUS LOGO! 230RCE
• Min.
-25 °C; = Tmin
-25 °C; = Tmin
• max.
70 °C; = Tmax
70 °C; = Tmax
Tmin ... Tmax at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m)
100 %; Relative humidity, incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity, incl. condensation / frost
permitted (no commissioning under condensation
conditions)
- against biologically active
substances / conformity with
EN 60721-3-3
Yes; Class 3B2 mold, fungus and dry rot spores (with the
exception of fauna). The supplied connector covers must
remain on the unused interfaces during operation!
Yes; Class 3B2 mold, fungus and dry rot spores (with the
exception of fauna). The supplied connector covers must
remain on the unused interfaces during operation!
- against chemically active
substances / conformity with
EN 60721-3-3
Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 Yes; Class 3C4 incl. salt spray according to EN 60068-2-52
(degree of severity 3). The supplied connector covers must (degree of severity 3). The supplied connector covers must
remain on the unused interfaces during operation!
remain on the unused interfaces during operation!
- against mechanically active
substances / conformity with
EN 60721-3-3
Yes; Class 3S4 incl. sand, dust. The supplied connector
covers must remain on the unused interfaces during
operation!
Ambient conditions
Ambient temperature in operation
Extended ambient conditions
• Relative to ambient temperatureatmospheric pressure-installation
altitude
Relative humidity
- With condensation, max.
Resistance
■ Ordering data
Yes; Class 3S4 incl. sand, dust. The supplied connector
covers must remain on the unused interfaces during
operation!
Article No.
Article No.
SIPLUS LOGO! 24
SIPLUS LOGO! 12/24RC
24 V DC supply voltage,
8 digital inputs 24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 digital outputs 24 V DC, 0.3 A;
integrated time switch;
200 function blocks can be
interlinked,
modular expansion capability
12/24 V DC power supply,
8x 12/24 V DC digital inputs, of
which 4 can be used in analog
mode (0 to 10 V)
4x 10 A relay outputs,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
Extended temperature range and
exposure to media
6AG1052-1CC01-2BA6
Extended temperature range and
exposure to media
SIPLUS LOGO! 230RC
SIPLUS LOGO! 12/24RCE
115/230 V AC/DC supply voltage,
8 digital inputs 115/230 V AC/DC,
4 relay outputs 10 A,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
12/24 V DC supply voltage,
8 digital inputs 12/24 V DC, of
which 4 can be used in analog
mode (0 to 10 V)
4 relay outputs 10 A,
integral time switch;
400 function blocks can be
interlinked,
Ethernet interface,
modular expansion capability
Extended temperature range and
exposure to media
6AG1052-1FB00-2BA6
SIPLUS LOGO! 230RCE
Extended temperature range and
exposure to media
115/230 V AC/DC supply voltage,
8 digital inputs 115/230 V AC/DC,
4 relay outputs 10 A,
integral time switch;
400 function blocks can be
interlinked,
Ethernet interface,
modular expansion capability
Extended temperature range and
exposure to media
SIPLUS Upmiter upstream device
Siemens ST 70 · 2015
6AG1053-1AA00-2AA0
for reliable operation at the battery
of combustion engines
Further accessories
6AG1052-1FB00-2BA7
24 V AC/DC supply voltage,
8 digital inputs 24 V AC/DC,
4 relay outputs 10 A,
integral time switch;
200 function blocks can be
interlinked,
modular expansion capability
2/10
6AG1052-1MD00-2BA7
Accessories
SIPLUS LOGO! 24RC
Extended temperature range and
exposure to media
6AG1052-1MD00-2BA6
6AG1052-1HB00-2BA6
See LOGO! modular basic
variants, page 2/7
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular pure variants
■ Overview
• Basic variants optimized for costs
• Interface for the connection of expansion modules, up to
24 digital inputs, 16 (20) digital outputs, 8 analog inputs and
2 (8) analog outputs can be addressed
• With connection option for LOGO! TD text display (can be
connected to all LOGO! 0BA6 basic variants)
New LOGO! 8
• All basic units with integrated Web server
• Enclosure width as LOGO! 0BA6 (4 MW)
• All basic units with Ethernet interface for communication with
LOGO!, SIMATIC Controllers, SIMATIC Panels and PCs
• Use of standard micro SD cards
■ Technical specifications
Article number
6ED1052-2CC01-0BA8
6ED1052-2MD00-0BA8
6ED1052-2HB00-0BA8
LOGO! 24CEO,
LOGO!12/24RCEO,
LOGO! 24RCEO, 8DI/4DO,
8DI(4AI)/4DO, 400 BLOCKS 8DI(4AI)/4DO, 400 BLOCKS 400 BLOCKS
6ED1052-2FB00-0BA8
LOGO!230RCEO,
8DI/4DO, 400 BLOCKS
Product type designation
Installation type/mounting
Mounting
on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing
units wide
units wide
units wide
units wide
Supply voltage
Rated value (DC)
• 12 V DC
• 24 V DC
Yes
Yes
Yes
Yes
• 115 V DC
Yes
Yes
• 230 V DC
permissible range, lower limit (DC)
20.4 V
10.8 V
20.4 V
100 V
permissible range, upper limit (DC)
28.8 V
28.8 V
28.8 V
253 V
Rated value (AC)
• 24 V AC
Yes
• 115 V AC
Yes
• 230 V AC
Yes
Time of day
Time switching clocks
• Number
190
8
8
8
• Power reserve
480 h
480 h
480 h
480 h
Digital inputs
Number of digital inputs
8; Of which 4 can be used in 8; Of which 4 can be used in 8
analog mode (0 to 10 V)
analog mode (0 to 10 V)
8
Number of digital outputs
4; Transistor
4; Relays
4; Relays
4; Relays
short-circuit protection
Yes; electrical (1 A)
No; external fusing
necessary
No; external fusing
necessary
No; external fusing
necessary
0.3 A
10 A
Digital outputs
Output current
• for signal "1" permissible range for
0 to 55 °C, max.
Relay outputs
Switching capacity of contacts
- with inductive load, max.
3A
3A
3A
- with resistive load, max.
10 A
10 A
10 A
Yes
Yes
Yes
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Yes; Radio interference
suppression according to
EN 55011,
Limit Value Class B
Siemens ST 70 · 2015
2/11
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular pure variants
■ Technical specifications (continued)
Article number
2
6ED1052-2CC01-0BA8
6ED1052-2MD00-0BA8
6ED1052-2HB00-0BA8
6ED1052-2FB00-0BA8
LOGO! 24CEO,
LOGO!12/24RCEO,
LOGO! 24RCEO, 8DI/4DO,
8DI(4AI)/4DO, 400 BLOCKS 8DI(4AI)/4DO, 400 BLOCKS 400 BLOCKS
LOGO!230RCEO,
8DI/4DO, 400 BLOCKS
Yes
Yes
Yes
Yes
CSA approval
Yes
Yes
Yes
Yes
UL approval
Yes
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
0 °C
• max.
55 °C
55 °C
55 °C
55 °C
Width
71.5 mm
71.5 mm
71.5 mm
71.5 mm
Height
90 mm
90 mm
90 mm
90 mm
Depth
58 mm
58 mm
58 mm
58 mm
Article number
6ED1052-2CC01-0BA6
6ED1052-2MD00-0BA6
6ED1052-2HB00-0BA6
6ED1052-2FB00-0BA6
Degree and class of protection
Degree of protection to EN 60529
• IP20
Standards, approvals, certificates
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
LOGO! 24CO, 8DI(4AI)/4DO, LOGO! 12/24RCO,
LOGO! 24RCO, 8DI/4DO,
200 BLOCKS
8DI(4AI)/4DO, 200 BLOCKS 200 BLOCKS
LOGO! 230RCO, 8DI/4DO,
200 BLOCKS
Product type designation
Installation type/mounting
Mounting
on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing on 35 mm DIN rail, 4 spacing
units wide
units wide
units wide
units wide
Supply voltage
Rated value (DC)
• 12 V DC
Yes
• 24 V DC
Yes
Yes
Yes
• 115 V DC
Yes
Yes
• 230 V DC
permissible range, lower limit (DC)
20.4 V
10.8 V
20.4 V
100 V
permissible range, upper limit (DC)
28.8 V
28.8 V
28.8 V
253 V
Rated value (AC)
• 24 V AC
Yes
• 115 V AC
Yes
• 230 V AC
Yes
Time of day
Time switching clocks
• Number
190
8
8
8
• Power reserve
80 h
80 h
80 h
80 h
Digital inputs
Number of digital inputs
8; Of which 4 can be used in 8; Of which 4 can be used in 8
analog mode (0 to 10 V)
analog mode (0 to 10 V)
8
Number of digital outputs
4; Transistor
4; Relays
4; Relays
4; Relays
short-circuit protection
Yes; electrical (1 A)
No; external fusing
necessary
No; external fusing
necessary
No; external fusing
necessary
- with inductive load, max.
3A
3A
3A
- with resistive load, max.
10 A
10 A
10 A
Digital outputs
Output current
• for signal "1" permissible range for
0 to 55 °C, max.
0.3 A
Relay outputs
Switching capacity of contacts
2/12
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular pure variants
■ Technical specifications (continued)
Article number
6ED1052-2CC01-0BA6
6ED1052-2MD00-0BA6
6ED1052-2HB00-0BA6
6ED1052-2FB00-0BA6
LOGO! 24CO, 8DI(4AI)/4DO, LOGO! 12/24RCO,
LOGO! 24RCO, 8DI/4DO,
200 BLOCKS
8DI(4AI)/4DO, 200 BLOCKS 200 BLOCKS
LOGO! 230RCO, 8DI/4DO,
200 BLOCKS
Yes; Radio interference
Yes
suppression according to
EN 55011, Limit Value Class B
Yes
Yes
Yes
Yes
Yes
Yes
CSA approval
Yes
Yes
Yes
Yes
UL approval
Yes
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Yes
Developed in acc. with IEC 61131
Yes
Yes
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
0 °C
• max.
55 °C
55 °C
55 °C
55 °C
Width
72 mm
72 mm
72 mm
72 mm
Height
90 mm
90 mm
90 mm
90 mm
Depth
55 mm
55 mm
55 mm
55 mm
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
Standards, approvals, certificates
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
■ Ordering data
Article No.
LOGO! 8 logic module
LOGO! 24CEo logic module
LOGO! 6 logic module
6ED1052-2CC01-0BA8
24 V DC supply voltage,
8 digital inputs 24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 digital outputs 24 V DC, 0.3 A,
integral time switch
Ethernet interface;
without display and keyboard;
400 function blocks can be
interlinked,
modular expansion capability
LOGO! 12/24RCEo logic module
LOGO! 12/24RCo logic module
6ED1052-2MD00-0BA8
115...230 V AC/DC supply voltage,
8 digital inputs 115...230 V AC/DC,
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
400 function blocks can be
interlinked,
modular expansion capability
6ED1052-2CC01-0BA6
6ED1052-2HB00-0BA6
24 V AC/DC supply voltage,
8 digital inputs 24 V AC/DC,
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability
LOGO! 230RCo logic module
6ED1052-2FB00-0BA8
6ED1052-2MD00-0BA6
12/24 V DC supply voltage,
8 digital inputs 12/24 V DC, of
which 4 can be used in analog
mode (0 to 10 V),
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability
LOGO! 24RCo logic module
6ED1052-2HB00-0BA8
24 V AC/DC supply voltage,
8 digital inputs 24 V AC/DC,
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
400 function blocks can be
interlinked,
modular expansion capability
LOGO! 230RCEo logic module
LOGO! 24Co logic module
24 V DC supply voltage,
8 digital inputs 24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 digital outputs 24 V DC, 0.3 A,
integrated time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability
12...24 V DC supply voltage,
8 digital inputs 12...24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
400 function blocks can be
interlinked,
modular expansion capability
LOGO! 24RCEo logic module
Article No.
6ED1052-2FB00-0BA6
115/230 V AC/DC supply voltage,
8 digital inputs 115/230 V AC/DC,
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be interlinked,
modular expansion capability
Siemens ST 70 · 2015
2/13
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular pure variants
■ Ordering data
Article No.
Accessories for LOGO! 8
2
LOGO! TDE text display
Article No.
Accessories for LOGO! 6
6ED1055-4MH00-0BA1
LOGO! TD text display
6-line text display, can be
connected to all LOGO! 8 Basic
and Pure versions, with 2 Ethernet
interfaces; including installation
accessories.
4-line text display, can be
connected to all LOGO! 0BA6
Basic and Pure versions, including
connecting cable
Requires additional 12 V DC or
24 V AC/DC power supply
(Extended temperature range
-10 ... +60 °C and medial loading)
LOGO!Soft Comfort V8
SIPLUS LOGO! TD text display
6ED1058-0BA08-0YA1
4-line text display, can be
connected to all LOGO! 0BA6
Basic and Pure versions, including
connecting cable
6ED1058-0CA08-0YE1
LOGO! Memory Card
For programming on the PC in
LAD/FBD; executes on Windows 8,
7, XP, Linux and Mac OSX; on DVD
LOGO!Soft Comfort V8 Upgrade
Upgrade from V1.0 to V8, on DVD
LOGO battery card
In TANOS Box, with LOGO! 8,
LOGO! Soft Comfort V8,
WinCC Basic V13, Ethernet cable,
6ED1057-3BA00-0AA8
6ED1057-3BA02-0AA8
Combined program and battery
module, with know-how protection
and buffer for the integral real-time
clock (not LOGO! 24o)
6ED1057-3BA10-0AA8
LOGO! PROM
6AV2132-0HA00-0AA1
Programming device used to
simultaneously reproduce program
module contents on up to
8 program modules
With LOGO! 230RCE
LOGO! 8 TDE Starter Kit
With LOGO! 12/24RCEO,
LOGO! Power 24 V, 1.3 A,
LOGO! TDE
LOGO! 8 KP300 Basic Starter Kit
LOGO!Soft Comfort V8
With LOGO! 12/24RCE,
LOGO! Power 24 V 1.3 A,
KP300 Basic mono PN
LOGO! 8 KTP400 Basic Starter Kit
6AV2132-0KA00-0AA1
With LOGO! 12/24RCE,
LOGO! Power 24 V 1.3 A,
KTP700 Basic
6ED1056-6XA00-0BA0
6ED1056-7DA00-0BA0
6AG1057-1AA01-0BA6
6ED1058-0BA08-0YA1
For programming on the PC in
LAD/FBD; executes on Windows 8,
7, XP, Linux and Mac OSX; on DVD
LOGO!Soft Comfort V8 Upgrade
With LOGO! 12/24RCE,
LOGO! Power 24 V 1.3 A,
KTP400 Basic
LOGO! 8 KTP700 Basic Starter Kit
6ED1056-1DA00-0BA0
Battery module for backing up the
integral real-time clock
(not LOGO! 24)
LOGO! memory/battery card
With LOGO! 12/24RCE,
LOGO! Power 24 V 1.3 A
LOGO! 8 230V Starter Kit
6AG1055-4MH00-2BA0
Program module for copying, with
know-how protection
LOGO! 8 Starter Kits
LOGO! 8 12/24 V Starter Kit
6ED1055-4MH00-0BA0
6ED1058-0CA08-0YE1
Upgrade from V1.0 to V8, on DVD
6AV2132-3GB00-0AA1
LOGO! PC cable
6ED1057-1AA00-0BA0
For program transfer between
LOGO! and the PC
LOGO! USB PC cable
6ED1057-1AA01-0BA0
For transferring the program
between LOGO! and PC, including
driver on CD-ROM
LOGO! modem cable
Adapter cable for analog modem
communication
2/14
Siemens ST 70 · 2015
6ED1057-1CA00-0BA0
© Siemens AG 2015
LOGO! logic module
LOGO! modular
SIPLUS LOGO! modular pure variants
■ Overview
• Basic variants optimized for costs
• Interface for the connection of expansion modules,
up to 24 digital inputs, 16 digital outputs, 8 analog inputs and
2 analog outputs can be addressed
• With connection option for LOGO! text display TD
(can be connected to all LOGO! 0BA6 basic versions)
Note:
SIPLUS extreme products are based on Siemens Industry
standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific
information was added.
■ Technical specifications
Article number
6AG1052-2CC01-2BA6
6AG1052-2MD00-2BA6
6AG1052-2HB00-2BA6
6AG1052-2FB00-2BA6
Based on
6ED1052-2CC01-0BA6
6ED1052-2MD00-0BA6
6ED1052-2HB00-0BA6
6ED1052-2FB00-0BA6
SIPLUS LOGO! 24CO
SIPLUS LOGO! 12/24RCO
SIPLUS LOGO! 24RCO
SIPLUS LOGO! 230RCO
• Min.
-40 °C; = Tmin
-40 °C; = Tmin
-40 °C; = Tmin
-40 °C; = Tmin
• max.
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
- against biologically active
substances / conformity with
EN 60721-3-3
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
- against chemically active
substances / conformity with
EN 60721-3-3
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
- against mechanically active
substances / conformity with
EN 60721-3-3
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Ambient conditions
Ambient temperature in operation
Extended ambient conditions
• Relative to ambient temperatureatmospheric pressure-installation
altitude
Relative humidity
- With condensation, max.
Resistance
Siemens ST 70 · 2015
2/15
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
SIPLUS LOGO! modular pure variants
■ Ordering data
2
Article No.
Article No.
SIPLUS LOGO! 24o
Accessories
24 V DC supply voltage,
8 digital inputs 24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 digital outputs 24 V DC, 0.3 A,
integrated time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability
SIPLUS Upmiter upstream device
Extended temperature range and
exposure to media
Further accessories
6AG1052-2CC01-2BA6
SIPLUS LOGO! 230RCo
115/230 V AC/DC supply voltage,
8 digital inputs 115/230 V AC/DC,
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability
Extended temperature range and
exposure to media
6AG1052-2FB00-2BA6
SIPLUS LOGO! 24RCo
24 V AC/DC supply voltage,
8 digital inputs 24 V AC/DC,
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability
Extended temperature range and
exposure to media
6AG1052-2HB00-2BA6
SIPLUS LOGO! 12/24RCo
12/24 V DC supply voltage,
8 digital inputs 12/24 V DC, of
which 4 can be used in analog
mode (0 to 10 V),
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can be
interlinked,
modular expansion capability
Extended temperature range and
exposure to media
2/16
Siemens ST 70 · 2015
6AG1053-1AA00-2AA0
for reliable operation at the battery
of combustion engines
6AG1052-2MD00-2BA6
See LOGO! modular pure
variants, page 2/14
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Overview
• Expansion modules for connection to LOGO! modular
• With digital inputs and outputs, analog inputs, or analog
outputs
■ Technical specifications
Article number
6ED1055-1CB00-0BA2
6ED1055-1HB00-0BA2
6ED1055-1MB00-0BA2
LOGO! DM8 24 EXP. MOD., LOGO! DM8 24R EXP. MOD. LOGO! DM8 12/24R EXP.
4DI/4DO
2DU, 4DI/4DO
MOD. 2DU, 4DI/DO
6ED1055-1FB00-0BA2
LOGO! DM8 230R EXP.
MOD. 2DU, 4DI/4DO
Product type designation
Installation type/mounting
Mounting
on 35 mm DIN rail, 2 spacing on 35 mm DIN rail, 2 spacing on 35 mm DIN rail, 2 spacing on 35 mm DIN rail, 2 spacing
units wide
units wide
units wide
units wide
Supply voltage
Rated value (DC)
• 12 V DC
• 24 V DC
Yes
Yes
Yes
Yes
• 115 V DC
Yes
Yes
• 230 V DC
permissible range, lower limit (DC)
20.4 V
20.4 V
10.8 V
100 V
permissible range, upper limit (DC)
28.8 V
28.8 V
28.8 V
253 V
Rated value (AC)
• 24 V AC
Yes
• 115 V AC
Yes
• 230 V AC
Yes
Line frequency
• permissible frequency range,
upper limit
63 Hz
63 Hz
Digital inputs
Number of digital inputs
4
4
4
4
• Type of input voltage
DC
AC/DC
DC
AC/DC
• for signal "0"
< 5V DC
< 5 V AC/DC
< 5V DC
< 40 V AC; < 30 V DC
• for signal "1"
> 12V DC
> 12 V AC/DC
> 8.5 V
> 79 V AC, > 79 V DC
• for signal "0", max.
(permissible quiescent current)
0.88 mA
1.1 mA
0.88 mA
0.06 mA; 0.05 mA with AC,
0.06 mA with DC
• for signal "1", typ.
4 mA
5.5 mA
4.2 mA
0.37 mA
- at "0" to "1", max.
1.5 ms
1.5 ms
1.5 ms
40 ms
- at "1" to "0", max.
1.5 ms
15 ms
1.5 ms
75 ms
Input voltage
Input current
Input delay
(for rated value of input voltage)
for standard inputs
Siemens ST 70 · 2015
2/17
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
2
6ED1055-1CB00-0BA2
6ED1055-1HB00-0BA2
6ED1055-1MB00-0BA2
6ED1055-1FB00-0BA2
LOGO! DM8 24 EXP. MOD., LOGO! DM8 24R EXP. MOD. LOGO! DM8 12/24R EXP.
4DI/4DO
2DU, 4DI/4DO
MOD. 2DU, 4DI/DO
LOGO! DM8 230R EXP.
MOD. 2DU, 4DI/4DO
Number of digital outputs
4
4; Relays
4; Relays
4; Relays
short-circuit protection
Yes
No
No
No
Yes
Yes
Yes
1 000 W
1 000 W
1 000 W
No
No
No
No
• with resistive load, max.
10 Hz
2 Hz
2 Hz
2 Hz
• with inductive load, max.
0.5 Hz
0.5 Hz
0.5 Hz
0.5 Hz
10 Hz
10 Hz
10 Hz
- with inductive load, max.
3A
3A
3A
- with resistive load, max.
5A
5A
5A
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CSA approval
Yes
Yes
Yes
Yes
UL approval
Yes
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
0 °C
• max.
55 °C
55 °C
55 °C
55 °C
Width
35.5 mm
35.5 mm
35.5 mm
35.5 mm
Height
90 mm
90 mm
90 mm
90 mm
Depth
58 mm
58 mm
58 mm
58 mm
Digital outputs
Controlling a digital input
Switching capacity of the outputs
• on lamp load, max.
Parallel switching of 2 outputs
• for increased power
Switching frequency
• mechanical, max.
Relay outputs
Switching capacity of contacts
- Thermal continuous current, max. 0.3 A
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
Standards, approvals, certificates
Yes
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
2/18
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
6ED1055-1CB10-0BA2
6ED1055-1NB10-0BA2
6ED1055-1FB10-0BA2
LOGO! DM16 24 EXP. MOD., 4DU,
8DI/8DO
LOGO! DM16 24R EXP. MOD. 4DU,
8DI/8DO
LOGO! DM16 230R EXP. MOD. 4DU,
8DI/8DO
on 35 mm DIN rail,
4 spacing units wide
on 35 mm DIN rail,
4 spacing units wide
on 35 mm DIN rail,
4 spacing units wide
Yes
Yes
Product type designation
Installation type/mounting
Mounting
Supply voltage
Rated value (DC)
• 24 V DC
• 115 V DC
Yes
Yes
• 230 V DC
permissible range, lower limit (DC)
20.4 V
20.4 V
100 V
permissible range, upper limit (DC)
28.8 V
28.8 V
253 V
Rated value (AC)
• 115 V AC
Yes
• 230 V AC
Yes
Line frequency
• permissible frequency range,
upper limit
63 Hz
Digital inputs
Number of digital inputs
8
8
8
• Type of input voltage
DC
DC
AC/DC
• for signal "0"
< 5V DC
< 5V DC
< 40 V AC; < 30 V DC
• for signal "1"
> 12V DC
> 12V DC
> 79 V AC, > 79 V DC
• for signal "0", max.
(permissible quiescent current)
0.85 mA
0.85 mA
0.06 mA;
0.05 mA with AC, 0.06 mA with DC
• for signal "1", typ.
3.5 mA
3.5 mA
0.37 mA
- at "0" to "1", max.
1.5 ms
1.5 ms
40 ms
- at "1" to "0", max.
1.5 ms
1.5 ms
75 ms
Number of digital outputs
8
8; Relays
8
short-circuit protection
Yes
No
No
Controlling a digital input
Yes
Yes
Yes
1 000 W
1 000 W
No
No
No
• with resistive load, max.
10 Hz
2 Hz
2 Hz
• with inductive load, max.
0.5 Hz
0.5 Hz
0.5 Hz
10 Hz
10 Hz
- with inductive load, max.
3A
3A
- with resistive load, max.
5A
5A
Yes
Yes
Yes
Yes
Yes
Yes
Input voltage
Input current
Input delay
(for rated value of input voltage)
for standard inputs
Digital outputs
Switching capacity of the outputs
• on lamp load, max.
Parallel switching of 2 outputs
• for increased power
Switching frequency
• mechanical, max.
Relay outputs
Switching capacity of contacts
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
Siemens ST 70 · 2015
2/19
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
2
6ED1055-1CB10-0BA2
6ED1055-1NB10-0BA2
6ED1055-1FB10-0BA2
LOGO! DM16 24 EXP. MOD., 4DU,
8DI/8DO
LOGO! DM16 24R EXP. MOD. 4DU,
8DI/8DO
LOGO! DM16 230R EXP. MOD. 4DU,
8DI/8DO
CSA approval
Yes
Yes
Yes
UL approval
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
• max.
55 °C
55 °C
55 °C
Width
71.5 mm
71.5 mm
71.5 mm
Height
90 mm
90 mm
90 mm
Depth
58 mm
58 mm
58 mm
Article number
6ED1055-1MA00-0BA2
6ED1055-1MD00-0BA2
LOGO! AM2 EXP. MOD., 12/24V, 2AI
LOGO! AM2 RDT, 2AI, -50..+200DECR/C
on 35 mm DIN rail, 2 spacing units wide
on 35 mm DIN rail, 2 spacing units wide
• 12 V DC
Yes; 10.8V DC to 28.8V DC
Yes; 10.8V DC to 28.8V DC
• 24 V DC
Yes; 10.8V DC to 28.8V DC
Yes; 10.8V DC to 28.8V DC
2
2; 2 or 3 wire connection
• Voltage
Yes
No
• Current
Yes
No
• Resistance thermometer
No
Yes; For PT100/PT1000 sensors
Yes
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Standards, approvals, certificates
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
Product type designation
Installation type/mounting
Mounting
Supply voltage
Rated value (DC)
Analog inputs
Number of analog inputs
Input ranges
Input ranges (rated values),
voltages
• 0 to +10 V
Input ranges (rated values), currents
• 0 to 20 mA
Input ranges (rated values),
resistance thermometer
• Pt 100
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
2/20
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
6ED1055-1MA00-0BA2
6ED1055-1MD00-0BA2
LOGO! AM2 EXP. MOD., 12/24V, 2AI
LOGO! AM2 RDT, 2AI, -50..+200DECR/C
CSA approval
Yes
Yes
UL approval
Yes
Yes
FM approval
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
according to VDE 0631
Yes
2
Standards, approvals, certificates
Marine approval
• Marine approval
Yes
Yes
• Min.
0 °C
0 °C
• max.
55 °C
55 °C
Width
35.5 mm
35.5 mm
Height
90 mm
90 mm
Depth
58 mm
58 mm
Article number
6ED1055-1MM00-0BA2
Ambient conditions
Ambient temperature in operation
Dimensions
Article number
LOGO! AM2 AQ, 2AQ, 0-10V,
0/4-20MA
Product type designation
LOGO! AM2 AQ, 2AQ, 0-10V,
0/4-20MA
Standards, approvals, certificates
Installation type/mounting
Mounting
on 35 mm DIN rail,
2 spacing units wide
Supply voltage
Rated value (DC)
CSA approval
Yes
UL approval
Yes
FM approval
Yes
Developed in accordance with
IEC 61131
Yes
Yes
• 12 V DC
No
according to VDE 0631
• 24 V DC
Yes
Marine approval
2
Ambient conditions
• Marine approval
Analog outputs
Number of analog outputs
Yes
Ambient temperature in operation
Output ranges, voltage
• 0 to 10 V
6ED1055-1MM00-0BA2
• Min.
0 °C
EMC
• max.
55 °C
Emission of radio interference
acc. to EN 55 011
Dimensions
• Limit class B, for use in residential
areas
Yes
Yes
Degree and class of protection
Width
35.5 mm
Height
90 mm
Depth
58 mm
Degree of protection to EN 60529
• IP20
Yes
Siemens ST 70 · 2015
2/21
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
2
6ED1055-1CB00-0BA0
6ED1055-1HB00-0BA0
6ED1055-1MB00-0BA1
6ED1055-1FB00-0BA1
LOGO! DM8 24 EXP. MOD., LOGO! DM8 24R EXP. MOD. LOGO! DM8 12/24R EXP.
4DI/4DO
2DU, 4DI/4DO
MOD. 2DU, 4DI/DO
LOGO! DM8 230R EXP.
MOD. 2DU, 4DI/4DO
on 35 mm DIN rail,
2 spacing units wide
on 35 mm DIN rail,
2 spacing units wide
on 35 mm DIN rail,
2 spacing units wide
Yes
Yes
Product type designation
Installation type/mounting
Mounting
on 35 mm DIN rail,
2 spacing units wide
Supply voltage
Rated value (DC)
• 12 V DC
Yes
• 24 V DC
Yes
• 115 V DC
Yes
• 230 V DC
Yes
permissible range, lower limit (DC)
20.4 V
20.4 V
10.8 V
100 V
permissible range, upper limit (DC)
28.8 V
28.8 V
28.8 V
253 V
Rated value (AC)
• 24 V AC
Yes
• 115 V AC
Yes
• 230 V AC
Yes
Digital inputs
Number of digital inputs
4
4
4
4
DC
AC/DC
DC
AC/DC
Number of digital outputs
4
4; Relays
4; Relays
4; Relays
short-circuit protection
Yes
No
No
No
- with inductive load, max.
3A
3A
3A
- with resistive load, max.
5A
5A
5A
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CSA approval
Yes
Yes
Yes
Yes
UL approval
Yes
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
0 °C
• max.
55 °C
55 °C
55 °C
55 °C
Width
36 mm; 2 DU
36 mm; 2 DU
36 mm; 2 DU
36 mm; 2 DU
Height
90 mm
90 mm
90 mm
90 mm
Depth
55 mm
55 mm
55 mm
55 mm
Input voltage
• Type of input voltage
Digital outputs
Relay outputs
Switching capacity of contacts
- Thermal continuous current, max. 0.3 A
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
Standards, approvals, certificates
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
2/22
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
6ED1055-1CB10-0BA0
6ED1055-1NB10-0BA0
6ED1055-1FB10-0BA0
LOGO! DM16 24, EXP. MOD., 4DU,
8DI/DO
LOGO! DM16 24R, EXP. MOD., 4DU,
8DI/DO
LOGO! DM16 230R, EXP. MOD., 4DU,
8DI/DO
on 35 mm DIN rail,
4 spacing units wide
on 35 mm DIN rail,
4 spacing units wide
on DIN rail 25 mm,
4 module spaces wide
Yes
Yes
Product type designation
Installation type/mounting
Mounting
Supply voltage
Rated value (DC)
• 24 V DC
• 115 V DC
Yes
Yes
• 230 V DC
permissible range, lower limit (DC)
20.4 V
20.4 V
100 V
permissible range, upper limit (DC)
28.8 V
28.8 V
253 V
Rated value (AC)
• 115 V AC
Yes
• 230 V AC
Yes
Line frequency
• permissible frequency range,
upper limit
63 Hz
Digital inputs
Number of digital inputs
8
8
8
• Type of input voltage
DC
DC
AC/DC
• for signal "0"
< 5V DC
< 5V DC
< 40 V AC; < 30 V DC
• for signal "1"
> 12V DC
> 12V DC
> 79 V AC, > 79 V DC
• for signal "0", max.
(permissible quiescent current)
1 mA
1 mA
0.03 mA
• for signal "1", typ.
2 mA
2 mA
0.08 mA
- at "0" to "1", max.
1.5 ms
1.5 ms
50 ms
- at "1" to "0", max.
1.5 ms
1.5 ms
50 ms
Number of digital outputs
8
8; Relays
8; Relays
short-circuit protection
Yes
No
No
Controlling a digital input
Yes
Yes
Yes
1 000 W
1 000 W
No
No
No
• with resistive load, max.
10 Hz
2 Hz
2 Hz
• with inductive load, max.
0.5 Hz
0.5 Hz
0.5 Hz
10 Hz
10 Hz
- with inductive load, max.
3A
3A
- with resistive load, max.
5A
5A
Yes
Yes
Yes
Yes
Yes
Yes
Input voltage
Input current
Input delay
(for rated value of input voltage)
for standard inputs
Digital outputs
Switching capacity of the outputs
• on lamp load, max.
Parallel switching of 2 outputs
• for increased power
Switching frequency
• mechanical, max.
Relay outputs
Switching capacity of contacts
- Thermal continuous current, max. 0.3 A
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Degree and class of protection
Degree of protection to EN 60529
• IP20
Siemens ST 70 · 2015
2/23
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
2
6ED1055-1CB10-0BA0
6ED1055-1NB10-0BA0
6ED1055-1FB10-0BA0
LOGO! DM16 24, EXP. MOD., 4DU,
8DI/DO
LOGO! DM16 24R, EXP. MOD., 4DU,
8DI/DO
LOGO! DM16 230R, EXP. MOD., 4DU,
8DI/DO
CSA approval
Yes
Yes
Yes
UL approval
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Developed in accordance with
IEC 61131
Yes
Yes
Yes
according to VDE 0631
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
• max.
55 °C
55 °C
55 °C
Width
72 mm; 4 WU
72 mm; 4 WU
72 mm; 4 WU
Height
90 mm
90 mm
90 mm
Depth
53 mm
53 mm
53 mm
Article number
6ED1055-1MA00-0BA0
6ED1055-1MD00-0BA1
LOGO! AM2 EXP. MOD., 12/24V, 2AI, 0-10V
LOGO! AM2 RDT, 2AI, -50..+200DECR/C
Standards, approvals, certificates
Marine approval
• Marine approval
Ambient conditions
Ambient temperature in operation
Dimensions
Product type designation
Installation type/mounting
Mounting
on 35 mm DIN rail, 2 spacing units wide
Supply voltage
Rated value (DC)
• 12 V DC
Yes
Yes; 10.8V DC to 28.8V DC
• 24 V DC
Yes
Yes; 10.8V DC to 28.8V DC
2
2; 2 or 3 wire connection
• Voltage
Yes
No
• Current
Yes
No
• Resistance thermometer
No
Yes; For PT100/PT1000 sensors
Analog inputs
Number of analog inputs
Input ranges
Input ranges (rated values),
voltages
• 0 to +10 V
Yes
Input ranges (rated values), currents
• 0 to 20 mA
Yes
EMC
Emission of radio interference
acc. to EN 55 011
• Limit class B, for use in residential
areas
Yes
Yes; Radio interference suppression according to
EN55011, Limit Value Class B
Yes
Yes
Degree and class of protection
Degree of protection to EN 60529
• IP20
2/24
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
6ED1055-1MA00-0BA0
6ED1055-1MD00-0BA1
LOGO! AM2 EXP. MOD., 12/24V, 2AI, 0-10V
LOGO! AM2 RDT, 2AI, -50..+200DECR/C
CSA approval
Yes
Yes; C22.2 Number 142
UL approval
Yes
Yes; UL 508
FM approval
Yes
Yes; FM-Standards No. 3611, 3600, 3810 Class I,
Division 2, Group A, B, C, D
Developed in accordance with
IEC 61131
Yes
Yes; EN 61131-2 (IEC 1131-2)
according to VDE 0631
Yes
2
Standards, approvals, certificates
Marine approval
• Marine approval
Yes
Yes; ABS, BV, DNV, GL, LRS, Class NK
• Min.
0 °C
0 °C
• max.
55 °C
55 °C
Width
36 mm
36 mm
Height
90 mm
90 mm
Depth
55 mm
53 mm
Article number
6ED1055-1MM00-0BA1
Ambient conditions
Ambient temperature in operation
Dimensions
Article number
LOGO! AM2 AQ, 2AQ, 0-10V,
0/4-20MA
Product type designation
LOGO! AM2 AQ, 2AQ, 0-10V,
0/4-20MA
Standards, approvals, certificates
Installation type/mounting
Mounting
on 35 mm DIN rail,
2 spacing units wide
Supply voltage
Rated value (DC)
CSA approval
Yes
UL approval
Yes
FM approval
Yes
Developed in accordance with
IEC 61131
Yes
Yes
• 12 V DC
No
according to VDE 0631
• 24 V DC
Yes
Marine approval
2
Ambient conditions
• Marine approval
Analog outputs
Number of analog outputs
Output ranges, voltage
• 0 to 10 V
6ED1055-1MM00-0BA1
Yes
Ambient temperature in operation
• Min.
0 °C
EMC
• max.
55 °C
Emission of radio interference
acc. to EN 55 011
Dimensions
• Limit class B, for use in residential
areas
Yes
Yes; Radio interference suppression
according to EN 55011,
Limit Value Class B
Width
36 mm
Height
90 mm
Depth
55 mm
Degree and class of protection
Degree of protection to EN 60529
• IP20
Yes
Siemens ST 70 · 2015
2/25
© Siemens AG 2015
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
■ Ordering data
Article No.
LOGO! 8 expansion modules
2
LOGO! DM8 24
LOGO! DM8 24R
6ED1055-1CB00-0BA2
24 V DC supply voltage,
4 digital inputs 24 V DC,
4 digital outputs 24 V DC, 0.3 A
LOGO! DM16 24
12...24 V DC supply voltage,
4 digital inputs 12...24 V DC,
4 relay outputs 5 A
LOGO! DM8 24R
24 V AC/DC supply voltage,
4 digital inputs 24 V AC/DC,
4 relay outputs 5 A
LOGO! DM16 24R
24 V DC supply voltage,
8 digital inputs 24 V DC,
8 relay outputs 5 A
LOGO! DM8 230R
115...230 V AC/DC supply voltage,
4 digital inputs 115...230 V AC/DC,
4 relay outputs 5 A
LOGO! DM16 230R
115...230 V AC/DC supply voltage,
8 digital inputs 115...230 V AC/DC,
8 relay outputs 5 A
LOGO! AM2
6ED1055-1MA00-0BA2
LOGO!Soft Comfort V8
6ED1055-1MD00-0BA2
LOGO!Soft Comfort V8 Upgrade
Accessories for LOGO! 6
6ED1055-1MM00-0BA2
LOGO! Memory Card
24 V DC supply voltage,
2 analog outputs 0 to 10 V,
0/4 to 20 mA
LOGO! 6 expansion modules
For programming on the PC in
LAD/FBD; executes on Windows 8,
7, XP, Linux and Mac OSX; on DVD
LOGO!Soft Comfort V8
6ED1055-1CB00-0BA0
24 V DC supply voltage,
4 digital inputs 24 V DC,
4 digital outputs 24 V DC, 0.3 A
LOGO! DM16 24
LOGO!Soft Comfort V8 Upgrade
12/24 V DC supply voltage,
4 digital inputs 12/24 V DC,
4 relay outputs 5 A
2/26
Siemens ST 70 · 2015
6ED1056-1DA00-0BA0
6ED1058-0BA08-0YA1
6ED1058-0CA08-0YE1
Upgrade from V1.0 to V8, on DVD
6ED1055-1CB10-0BA0
24 V DC supply voltage,
8 digital inputs 24 V DC, 8 digital
outputs 24 V DC, 0.3 A
LOGO! DM8 12/24R
6ED1058-0CA08-0YE1
Upgrade from V1.0 to V8, on DVD
For copying, with know-how
protection
LOGO! DM8 24
6ED1058-0BA08-0YA1
For programming on the PC in
LAD/FBD; executes on Windows 8,
7, XP, Linux and Mac OSX; on DVD
12...24 V DC supply voltage,
2 analog inputs Pt100, temperature
range -50 °C to 200 °C
LOGO! AM2 AQ
6ED1055-1MM00-0BA1
24 V DC supply voltage,
2 analog outputs 0 to 10 V,
0/4 to 20 mA
Accessories for LOGO! 8
12...24 V DC supply voltage,
2 analog inputs 0 to 10 V or
0 to 20 mA, resolution 10 bits
LOGO! AM2 PT 100
6ED1055-1MD00-0BA1
12/24 V DC supply voltage,
2 analog inputs Pt100, temperature
range -50 °C ... 200 °C
LOGO! AM2 AQ
6ED1055-1FB10-0BA2
6ED1055-1MA00-0BA0
12/24 V DC supply voltage,
2 analog inputs 0 to 10 V or
0 to 20 mA, 10-bit resolution
LOGO! AM2 PT 100
6ED1055-1FB00-0BA2
6ED1055-1FB10-0BA0
115/230 V AC/DC supply voltage,
8 digital inputs 115/230 V AC/DC,
8 relay outputs 5 A
LOGO! AM2
6ED1055-1NB10-0BA2
6ED1055-1FB00-0BA1
115/230 V AC/DC supply voltage,
4 digital inputs 115/230 V AC/DC,
4 relay outputs 5 A
LOGO! DM16 230R
6ED1055-1HB00-0BA2
6ED1055-1NB10-0BA0
24 V DC supply voltage,
8 digital inputs 24 V DC,
8 relay outputs 5 A
LOGO! DM8 230R
6ED1055-1MB00-0BA2
6ED1055-1HB00-0BA0
24 V AC/DC supply voltage,
4 digital inputs 24 V AC/DC,
4 relay outputs 5 A
LOGO! DM16 24R
6ED1055-1CB10-0BA2
24 V DC supply voltage,
8 digital inputs 24 V DC,
8 digital outputs 24 V DC, 0.3 A
LOGO! DM8 12/24R
Article No.
LOGO! PC cable
For program transfer between
LOGO! and the PC
6ED1055-1MB00-0BA1
6ED1057-1AA00-0BA0
© Siemens AG 2015
LOGO! logic module
LOGO! modular
SIPLUS LOGO! modular expansion modules
■ Overview
• Expansion modules for connection to LOGO! modular
• With digital inputs and outputs, analog inputs, or analog
outputs
Note:
SIPLUS extreme products are based on Siemens Industry
standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific
information was added.
■ Technical specifications
Article number
6AG1055-1CB00-2BY0
6AG1055-1PB00-2BY0
6AG1055-1HB00-2BY0
6AG1055-1MB00-2BY1
Based on
6ED1055-1CB00-0BA0
6ED1055-1PB00-0BA0
6ED1055-1HB00-0BA0
6ED1055-1MB00-0BA1
SIPLUS LOGO! DM8 24
SIPLUS LOGO! DM8 12/24
SIPLUS LOGO! DM8 24R
(-2BY0)
SIPLUS LOGO! DM8 12/24R
• Min.
-40 °C; = Tmin
-40 °C; = Tmin
-40 °C; = Tmin
-40 °C; = Tmin
• max.
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
70 °C; = Tmax;
55 °C @ UL/cUL use
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
100 %; Relative humidity,
incl. condensation / frost
permitted (no commissioning under condensation
conditions)
- against biologically active
substances / conformity with
EN 60721-3-3
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
Yes; Class 3B2 mold, fungus
and dry rot spores (with the
exception of fauna). The
supplied connector covers
must remain on the unused
interfaces during operation!
- against chemically active
substances / conformity with
EN 60721-3-3
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3C4 incl. salt
spray. The supplied
connector covers must
remain on the unused interfaces during operation!
- against mechanically active
substances / conformity with
EN 60721-3-3
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Yes; Class 3S4 incl. sand,
dust. The supplied
connector covers must
remain on the unused interfaces during operation!
Ambient conditions
Ambient temperature in operation
Extended ambient conditions
• Relative to ambient temperatureatmospheric pressure-installation
altitude
Relative humidity
- With condensation, max.
Resistance
Siemens ST 70 · 2015
2/27
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular
SIPLUS LOGO! modular expansion modules
■ Technical specifications (continued)
2
Article number
6AG1055-1FB00-2XB1
6AG1055-1FB00-2BY1
6AG1055-1NB10-2BA0
Based on
6ED1055-1FB00-0BA1
6ED1055-1FB00-0BA1
6ED1055-1NB10-0BA0
SIPLUS LOGO! DM8 230R
SIPLUS LOGO! DM8 230R
SIPLUS LOGO! DM16 24R
EXPANSION MODULE
• Min.
-25 °C; = Tmin
-40 °C; = Tmin
-25 °C; = Tmin
• max.
70 °C; = Tmax; 55 °C @ UL/cUL use
70 °C; = Tmax; 55 °C @ UL/cUL use
70 °C; = Tmax; 55 °C @ UL/cUL use
Tmin ... Tmax at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m)
Tmin ... Tmax at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m)
Tmin ... Tmax at 1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
100 %;
Relative humidity, incl. condensation /
frost permitted (no commissioning
under condensation conditions)
100 %;
Relative humidity, incl. condensation /
frost permitted (no commissioning
under condensation conditions)
100 %;
Relative humidity, incl. condensation /
frost permitted (no commissioning
under condensation conditions)
- against biologically active
substances / conformity with
EN 60721-3-3
Yes;
Class 3B2 mold, fungus and dry rot
spores (with the exception of fauna).
The supplied connector covers must
remain on the unused interfaces
during operation!
Yes;
Class 3B2 mold, fungus and dry rot
spores (with the exception of fauna).
The supplied connector covers must
remain on the unused interfaces
during operation!
Yes;
Class 3B2 mold, fungus and dry rot
spores (with the exception of fauna).
The supplied connector covers must
remain on the unused interfaces
during operation!
- against chemically active
substances / conformity with
EN 60721-3-3
Yes;
Class 3C4 incl. salt spray. The
supplied connector covers must
remain on the unused interfaces
during operation!
Yes;
Class 3C4 incl. salt spray. The
supplied connector covers must
remain on the unused interfaces
during operation!
Yes;
Class 3C4 incl. salt spray. The
supplied connector covers must
remain on the unused interfaces
during operation!
- against mechanically active
substances / conformity with
EN 60721-3-3
Yes;
Class 3S4 incl. sand, dust. The
supplied connector covers must
remain on the unused interfaces
during operation!
Yes;
Class 3S4 incl. sand, dust. The
supplied connector covers must
remain on the unused interfaces
during operation!
Yes;
Class 3S4 incl. sand, dust. The
supplied connector covers must
remain on the unused interfaces
during operation!
Ambient conditions
Ambient temperature in operation
Extended ambient conditions
• Relative to ambient temperatureatmospheric pressure-installation
altitude
Relative humidity
- With condensation, max.
Resistance
2/28
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular
SIPLUS LOGO! modular expansion modules
■ Technical specifications (continued)
Article number
6AG1055-1MA00-2BY0
Article number
6AG1055-1MM00-2BY1
Based on
6ED1055-1MA00-0BA0
Based on
6ED1055-1MM00-0BA1
SIPLUS LOGO! AM2
Ambient conditions
2
SIPLUS_LOGO!_AM2_AQ
Ambient conditions
Ambient temperature in operation
Ambient temperature in operation
• Min.
-40 °C; = Tmin
• Min.
-40 °C; = Tmin
• max.
70 °C; = Tmax; 55 °C @ UL/cUL use
• max.
70 °C; = Tmax; 55 °C @ UL/cUL use
Extended ambient conditions
• Relative to ambient temperatureatmospheric pressure-installation
altitude
Extended ambient conditions
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Relative humidity
- With condensation, max.
• Relative to ambient temperatureatmospheric pressure-installation
altitude
Tmin ... Tmax at
1080 hPa ... 795 hPa
(-1000 m ... +2000 m) //
Tmin ... (Tmax - 10K) at
795 hPa ... 658 hPa
(+2000 m ... +3500 m) //
Tmin ... (Tmax - 20K) at
658 hPa ... 540 hPa
(+3500 m ... +5000 m)
Relative humidity
100 %; Relative humidity, incl.
condensation / frost permitted
(no commissioning under
condensation conditions)
Resistance
- With condensation, max.
100 %; Relative humidity, incl.
condensation / frost permitted
(no commissioning under
condensation conditions)
Resistance
- against biologically active
substances / conformity with
EN 60721-3-3
Yes; Class 3B2 mold, fungus and dry
rot spores (with the exception of
fauna). The supplied connector
covers must remain on the unused
interfaces during operation!
- against biologically active
substances / conformity with
EN 60721-3-3
Yes; Class 3B2 mold, fungus and dry
rot spores (with the exception of
fauna). The supplied connector
covers must remain on the unused
interfaces during operation!
- against chemically active
substances / conformity with
EN 60721-3-3
Yes; Class 3C4 incl. salt spray. The
supplied connector covers must
remain on the unused interfaces
during operation!
- against chemically active
substances / conformity with
EN 60721-3-3
Yes; Class 3C4 incl. salt spray. The
supplied connector covers must
remain on the unused interfaces
during operation!
- against mechanically active
substances / conformity with
EN 60721-3-3
Yes; Class 3S4 incl. sand, dust. The
supplied connector covers must
remain on the unused interfaces
during operation!
- against mechanically active
substances / conformity with
EN 60721-3-3
Yes; Class 3S4 incl. sand, dust. The
supplied connector covers must
remain on the unused interfaces
during operation!
■ Ordering data
Article No.
Article No.
SIPLUS LOGO! DM8 24
SIPLUS LOGO! AM2 AQ
24 V DC supply voltage,
4 digital inputs 24 V DC,
4 digital outputs 24 V DC, 0.3 A
24 V DC supply voltage,
2 analog inputs 0 ... 10 V,
0/4 ... 20 mA, 10-bit resolution
Extended temperature range and
exposure to media
6AG1055-1CB00-2BY0
Extended temperature range and
exposure to media
SIPLUS LOGO! DM8 230R
SIPLUS LOGO! DM16 24R
115/230 V AC/DC supply voltage,
4 digital inputs 115/230 V AC/DC,
4 relay outputs 5 A
24 V DC supply voltage,
8 digital outputs 24 V DC,
8 relay outputs 5 A
Extended temperature range and
exposure to media
6AG1055-1FB00-2BY1
Extended temperature range and
exposure to media
SIPLUS LOGO! DM8 24R
SIPLUS LOGO! DM8 12/24
24 V AC/DC supply voltage,
4 digital inputs 24 V AC/DC,
4 relay outputs 5 A
12/24 V DC supply voltage,
4 digital inputs 12/24 V DC,
4 digital outputs 24 V DC, 0.3 A
Extended temperature range and
exposure to media
6AG1055-1HB00-2BY0
Extended temperature range and
exposure to media
SIPLUS LOGO! AM2
Accessories
12/24 V DC supply voltage,
2 analog inputs 0 ... 10 V or
0 ... 20 mA, 10-bit resolution
SIPLUS Upmiter upstream device
Extended temperature range and
exposure to media
6AG1055-1MM00-2BY1
6AG1055-1NB10-2BA0
6AG1055-1PB00-2BY0
6AG1053-1AA00-2AA0
for reliable operation at the battery
of combustion engines
6AG1055-1MA00-2BY0
Further accessories
See LOGO! modular pure
variants, page 2/26
SIPLUS LOGO! DM8 12/24R
12/24 V DC supply voltage,
4 digital inputs 12/24 V DC,
4 relay outputs 5 A
Extended temperature range and
exposure to media
6AG1055-1MB00-2BY1
Siemens ST 70 · 2015
2/29
© Siemens AG 2015
LOGO! logic module
LOGO! modular communication modules
LOGO! modular communication modules
■ Overview
Note on compatibility:
2
Communication module
Can be used with:
LOGO! CM EIB/KNX communication
module
LOGO! to ...0BA7
LOGO! CSM 12/24
LOGO! ...0BA7/...0BA8
LOGO! CSM 230
LOGO! ...0BA7
LOGO! CMR2020
LOGO! ...0BA8
LOGO! CMR2040
LOGO! ...0BA8
AS-Interface connection for LOGO!
LOGO! to ...0BA7
• Communication modules for connecting LOGO! modular to
different bus systems.
LOGO! CM EIB/KNX communication modules
■ Overview
■ Technical specifications
CM EIB/KNX
• Expansion module for LOGO! basic versions
• For communication between the LOGO! master and external
EIB components through EIB
Supply voltage
24 V AC/DC
Inputs, max.
16 DI/12 DO/8 AI/2 AO
Outputs, max.
16 digital
Continuous current
25 mA
Short-circuit protection
External fuse protection is required
Integrated time switches/power
reserve
-
Ambient temperature
0 … +55°C
RI specification
To EN 55 011 (limit class B)
Degree of protection
IP20
Certification
to VDE 0631, IEC61131-2, cULus, FM
Mounting
On DIN rail 35 mm,
2 module widths wide
Dimensions (W x H x D) in mm
36 (2 MW) × 90 × 55
■ Ordering data
LOGO! CM EIB KNX
communication module
For connection to EIB,
24 V DC supply voltage;
for LOGO! to ...0BA7
2/30
Siemens ST 70 · 2015
Article No.
6BK1700-0BA00-0AA2
© Siemens AG 2015
LOGO! logic module
LOGO! modular communication modules
LOGO! CSM unmanaged
■ Overview
The module is used to connect a LOGO! and up to three other
nodes to an Industrial Ethernet network with 10/100 Mbit/s in an
electrical linear, tree or star topology.
The essential features of the LOGO! CSM are:
• Unmanaged 4-port switch, of which one port is on the front for
easy diagnostics access
• Two versions for the voltage ranges 12/24 V DC or
230 V AC/DC
• Problem-free connection using four RJ45 standard
connectors
• Space-saving, optimized for connection to LOGO!
• Low-cost solution for implementing small, local Ethernet
networks
• Stand-alone use for networking any Ethernet devices
■ Technical specifications
Article number
6GK7177-1FA10-0AA0
6GK7177-1MA20-0AA0
Product type designation
LOGO! CSM 230
LOGO! CSM 12/24
10 Mbit/s, 100 Mbit/s
10 Mbit/s, 100 Mbit/s
Transmission rate
Transfer rate
Interfaces
Number of electrical/optical
connections
• for network components or terminal 4
equipment maximum
4
Number of electrical connections
• for network components or terminal 4
equipment
4
Type of electrical connection
• for network components or terminal RJ45 port / 1 connection on front of module
equipment
RJ45 port / 1 connection on front of module
• for power supply
3-pole terminal block
3-pole terminal block
AC/DC 115...240 V
DC 12/24 V
• external
230 V
24 V
• external
100 ... 240 V
10.2 ... 30.2 V
Product component fusing at power
supply input
Yes
Yes
Consumed current maximum
0.02 A
0.15 A
Supply voltage, current
consumption, power loss
Type of voltage of the supply voltage
Supply voltage
Active power loss
• for DC at 24 V
• with AC at 230 V
1.5 W
1.8 W
Permitted ambient conditions
Ambient temperature
• during operation
0 ... 55 °C
0 ... 55 °C
• during storage
-40 ... +70 °C
-40 ... +70 °C
• during transport
-40 ... +70 °C
-40 ... +70 °C
• at 25 °C without condensation
during operation maximum
90 %
90 %
Protection class IP
IP20
IP20
Relative humidity
Siemens ST 70 · 2015
2/31
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular communication modules
LOGO! CSM unmanaged
■ Technical specifications (continued)
2
Article number
6GK7177-1FA10-0AA0
6GK7177-1MA20-0AA0
Product type designation
LOGO! CSM 230
LOGO! CSM 12/24
Design
LOGO! module
LOGO! module
Width
72 mm
71.5 mm
Height
90 mm
90 mm
Depth
55 mm
58.2 mm
Net weight
0.155 kg
0.15 kg
• 35 mm DIN rail mounting
Yes
Yes
• wall mounting
Yes
Yes
• S7-300 rail mounting
No
No
• S7-1500 rail mounting
No
No
• multiport mirroring
No
No
• switch-managed
No
No
Design, dimensions and weight
Mounting type
Product functions management,
configuration
Product function
Standards, specifications,
approvals
Standard
• for FM
FM3600 and 3611: CL. I, Div2, Group A,B,C,D T4, CL I,
Zone 2, Group IIC, T4, Ta=0 +55°C
• for hazardous zone
no
ATEX: EN 60079-0 : 2009,EN 60079-15 :2010
(Directive 94/9/EC),
IECEx: IEC 60079-0 :2011, IEC 60079-15 :2010
• for safety from CSA and UL
UL60079-0, UL60079-15, CSA C22.2
UL 508, CSA C22.2 No. 142
• for hazardous zone from CSA and
UL
Haz-Loc ANSI/ISA 12.12.01: CL. I, Div2, Group A,B,C,D T4,
CL I, Zone 2, Group IIC, T4, Ta=0 +55°C
Certificate of suitability
• CE marking
Yes
Yes
• RCM
Yes
Yes
• KC approval
No
No
• American Bureau of Shipping
Europe Ltd. (ABS)
No
No
• Bureau Veritas (BV)
No
No
• Det Norske Veritas (DNV)
No
No
• Germanische Lloyd (GL)
No
No
• Lloyds Register of Shipping (LRS)
No
No
• Nippon Kaiji Kyokai (NK)
No
No
• Polski Rejestr Statkow (PRS)
No
No
Marine classification association
■ Ordering data
Article No.
LOGO! CSM compact switch
modules
Unmanaged switch for connection
of one LOGO! and up to three
further nodes on Industrial Ethernet
with 10/100 Mbps; 4 x RJ45 ports;
LED diagnostics, LOGO! module
• LOGO! CSM 12/24
external 12 V DC or
24 V DC power supply,
for LOGO! ... 0BA7/... 0BA8
• LOGO! CSM 230
external 115 ... 240 V AC power
supply, for LOGO! ... 0BA7
2/32
Siemens ST 70 · 2015
Article No.
Accessories
IE TP Cord RJ45/RJ45
6GK7177-1MA20-0AA0
6GK7177-1FA10-0AA0
TP cable 4 x 2 with 2 RJ45 plugs
• 0.5 m
•1m
•2m
•6m
• 10 m
6XV1870-3QE50
6XV1870-3QH10
6XV1870-3QH20
6XV1870-3QH60
6XV1870-3QN10
IE FC Outlet RJ45
6GK1901-1FC00-0AA0
For connection of Industrial
Ethernet FC cables and TP Cords;
graded prices from 10 and 50 units
© Siemens AG 2015
LOGO! logic module
LOGO! modular communication modules
LOGO! CMR (wireless communication)
■ Overview
Sending a text message can be initiated by events in the LOGO!
basic module as well as by the two digital alarm inputs of the
LOGO! CMR. The values in the LOGO! basic module can be
directly influenced by receiving a text message.
The two digital outputs can also be switched remotely by incoming text messages/emails.
LOGO! CMR determines the current position of the module
based on the GPS signal received by the GPS antenna. In addition, LOGO! BM can be time-synchronized by means of the time
included in the GPS signal.
Determining the time by means of an NTP server or from the data
of the mobile network provider, offers more options for synchronization of the LOGO! BM with the current time of day.
Product variant:
• LOGO! CMR2020 for use in GSM/GPRS mobile wireless
networks
• LOGO! CMR2040 for use in in LTE mobile wireless networks
LOGO! CMR in combination with the LOGO! module is a costefficient communication system for monitoring and controlling
distributed plants and systems via text message.
LOGO! CMR can send text messages to predefined mobile
network numbers and it can also receive text messages from
predefined mobile network numbers.
Warning! The country-specific mobile network approvals must
be observed:
DE: www.siemens.de/mobilfunkzulassungen
EN: www.siemens.com/mobilenetwork-approvals
■ Technical specifications
Article number
6GK7142-7BX00-0AX0
6GK7142-7EX00-0AX0
Product type designation
LOGO! CMR2020
LOGO! CMR2040
10 ... 100 Mbit/s
10 ... 100 Mbit/s
Transmission rate
Transfer rate
• at the 1st interface
• for GPRS transmission with downlink 80 kbit/s
maximum
85.6 kbit/s
• for GPRS transmission with uplink
maximum
85.6 kbit/s
40 kbit/s
• for LTE transmission with downlink
maximum
100 Mbit/s
• for LTE transmission with uplink
maximum
50 Mbit/s
Interfaces
Number of interfaces acc. to Industrial 1
Ethernet
1
Number of electrical connections
• at the 1st interface acc. to Industrial 1
Ethernet
1
• for external antenna(s)
2
2
• for power supply
1
1
• for SIM cards
1
1
• for memory cards
1
1
Number of slots
Type of electrical connection
• at the 1st interface acc. to Industrial RJ45 port
Ethernet
RJ45 port
• for external antenna(s)
SMA socket (50 ohms)
SMA socket (50 ohms)
• for power supply
3-pole terminal block
3-pole terminal block
• at port 1 connectable
GPS Antenna
GPS Antenna
• at port 2 connectable
Mobile radio antenna (GPRS/GSM)
Mobile radio antenna (GPRS/GSM)
• for SIM card
Standard
Standard
• of the memory card
microSD
microSD
Type of antenna
Slot version
Siemens ST 70 · 2015
2/33
2
© Siemens AG 2015
LOGO! logic module
LOGO! modular communication modules
LOGO! CMR (wireless communication)
■ Technical specifications (continued)
2
Article number
6GK7142-7BX00-0AX0
6GK7142-7EX00-0AX0
Product type designation
LOGO! CMR2020
LOGO! CMR2040
Storage capacity of the memory card 8 Gibyte
maximum
8 Gibyte
Performance class of the memory
card minimum necessary
Class 6
Class 6
Type of file system of the memory
card
FAT32
FAT32
Number of electrical connections for
digital input signals
2
2
Type of electrical connection for
digital input signals
3 pole terminal block
3 pole terminal block
Digital input version
not potential seperated
not potential seperated
• with signal <0> for DC
0 ... 5 V
0 ... 5 V
• for signal <1> for DC
8.5 ... 24 V
8.5 ... 24 V
Signal-Inputs/outputs
Input voltage at digital input
Input current at digital input for signal 5.5 mA
<1> maximum
5.5 mA
Number of electrical connections for
digital output signals
2
2
Type of electrical connection for
digital output signals
3 pole terminal block
3 pole terminal block
Digital output version
transistor, not potential seperated
transistor, not potential seperated
• for signal <1>
12 ... 24 V; value of the actual supply voltage
12 ... 24 V; value of the actual supply voltage
• for signal <0>
0 ... 5 V
0 ... 5 V
Output current at digital output for
signal <1> maximum
0.3 A
0.3 A
• is supported
SMS, GPRS
SMS, GPRS
• Note
GPRS (Multislot Class 10, Mobile Station Class B)
LTE
Type of mobile network is supported
GSM
GSM, UMTS, LTE
850 MHz, 900 MHz, 1800 MHz, 1900 MHz
850 MHz, 900 MHz, 1800 MHz, 1900 MHz
Output voltage at digital output
Wireless technology
Type of mobile wireless service
Operating frequency
• for GSM transmission
• with UMTS transmission
900 MHz, 2100 MHz
• for LTE transmission
800 MHz, 1800 MHz, 2600 MHz
Supply voltage, current
consumption, power loss
Type of voltage of the supply voltage
DC
DC
Supply voltage external
12 ... 24 V
12 ... 24 V
Supply voltage for GPS antenna
maximum
3.8 V; at 5 mA: 3,575 V / at 10 mA: 3,35 V / at 15 mA:
3,125 V
3.8 V; at 5 mA: 3,575 V / at 10 mA: 3,35 V / at 15 mA:
3,125 V
Relative positive tolerance for DC at
24 V
20 %
20 %
Relative negative tolerance for DC at
12 V
10 %
10 %
Consumed current
• from external supply voltage for DC 0.25 A
at 12 V maximum
0.25 A
• from external supply voltage for DC 0.125 A
at 24 V maximum
0.125 A
Output current for GPS antenna
maximum
15 mA
15 mA
Active power loss
3W
3W
2/34
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular communication modules
LOGO! CMR (wireless communication)
■ Technical specifications (continued)
Article number
6GK7142-7BX00-0AX0
6GK7142-7EX00-0AX0
Product type designation
LOGO! CMR2020
LOGO! CMR2040
• during operation
-20 ... +70 °C
-20 ... +70 °C
• during storage
-40 ... +85 °C
-40 ... +85 °C
• during transport
-40 ... +85 °C
-40 ... +85 °C
Relative humidity at 25 °C without
condensation during operation
maximum
95 %
95 %
Protection class IP
IP20
IP20
Module format
Compact module, for rail mounting
Compact module, for rail mounting
Width
71.5 mm
71.5 mm
Height
90 mm
90 mm
Depth
58.2 mm
58.2 mm
Net weight
0.16 kg
0.16 kg
• 35 mm DIN rail mounting
Yes
Yes
• wall mounting
Yes
Yes
Number of possible connections to
the LOGO! logic module
1
1
Number of users/telephon numbers
definable maximum
20
20
Number of user groups definable
maximum
20
20
Number of signals for monitoring or
device control definable maximum
32
32
Number of events for monitoring
definable maximum
32
32
number of actions definable maximum 32
32
2
Permitted ambient conditions
Ambient temperature
Design, dimensions and weight
Mounting type
Performance data
Product functions management,
configuration
Configuration software
• required
WEB-Interface
WEB-Interface
Yes
Yes
• password protection for Web
applications
Yes
Yes
• switch-off of non-required services
Yes
Yes
• log file for unauthorized access
Yes
Yes
Yes
Yes
• from NTP-server
Yes
Yes
• from GPS-signal
Yes
Yes
• from mobile network provider
Yes
Yes
Yes
Yes
Product functions Diagnosis
Product function Web-based
diagnostics
Product functions Security
Product function
Product functions Time
Product function pass on time
synchronization
time synchronization
Product functions
Position recognition
Product function position detection
with GPS
Siemens ST 70 · 2015
2/35
© Siemens AG 2015
LOGO! logic module
LOGO! modular communication modules
LOGO! CMR (wireless communication)
■ Ordering data
2
Article No.
Communication Module Radio
LOGO! CMR
Antenna adapter cable
N-Connect/SMA male/male
Flexible Connection Cable,
pre-fabricated, connection cable;
suitable for 0 ... 6 GHz, IP68
• 0.3 m
•1m
•2m
•5m
Communication modules for
connection of LOGO! 0BA8 to
GSM/GPRS or LTE network;
1x RJ45 port for Industrial Ethernet
connection;
2x digital input; 2x digital output;
read/write access to LOGO! tags;
possible to send/receive text
messages;
GPS position detection; time-of-day
synchronization/forwarding with real
time clock; configuration and
diagnostics per Web interface;
observe country approval
LOGO! CMR2020
6GK7142-7BX00-0AX0
6GK7142-7EX00-0AX0
For connecting LOGO! 0BA8 to an
LTE network;
Accessories
Flexible connecting cable for
connecting an RCoax cable or
antenna to a SCALANCE W-700
access point with N-Connect
connections; pre-assembled with
two N-Connect male connections;
suitable from 0 ... 6 GHz, IP68
•1m
•2m
•5m
• 10 m
6XV1875-5AH10
6XV1875-5AH20
6XV1875-5AH50
6XV1875-5AN10
Cabinet feedthrough
Mobile radio antennas
ANT794-4MR
For indoor and outdoor use;
5 m connecting cable permanently
connected to antenna;
SMA connector; incl. installation
bracket, screws, wall plugs
6NH9860-1AA00
ANT896-4MA
Rod antenna for direct mounting on
device; SMA male connector
6GK5896-4MA00-0AA3
ANT896-4ME
Cylinder-shaped antenna for
remote installation,
e.g. on a control cabinet;
N-Connect female connector
6GK5896-4ME00-0AA0
IWLAN RCOAX N-Connect/
N-Connect female/female Panel
Feedthrough;
control cabinet feedthrough for wall
thickness max. 4.5 mm;
2.4 GHz and 5 GHz, suitable for
0 ... 6 GHz, IP67
6GK5798-2PP00-2AA6
Lightning protector LP798-2N
Lightning protector with N/N
female/female connection for
ANT 790 antennas,
IP67 (-40 to +85 °C),
frequency range: 0 … 6 GHz
6GK5798-2LP00-2AA6
Patch cable
GPS antenna
IE TP Cord RJ45/RJ45
ANT895-6ML
GPS/Glonass antenna for remote
installation indoor and outdoor,
magnet or screw mounting,
30 cm cable with N-Connect female
connector
6GK5895-6ML00-0AA0
TP cable 4 x 2 with 2 RJ45 plugs
• 0.5 m
•1m
•2m
•6m
• 10 m
6XV1870-3QE50
6XV1870-3QH10
6XV1870-3QH20
6XV1870-3QH60
6XV1870-3QN10
IE FC Outlet RJ45
6GK1901-1FC00-0AA0
For connection of Industrial
Ethernet FC cables and TP cords;
graduated prices for
10 and 50 units or more
2/36
6XV1875-5LE30
6XV1875-5LH10
6XV1875-5LH20
6XV1875-5LH50
IWLAN RCoax/antenna
N-Connect male/male
Flexible connection cable
For connecting LOGO! 0BA8 to a
GSM/GPRS network
LOGO! CMR2040
Article No.
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO! modular communication modules
AS-Interface connection for LOGO!
■ Overview
Every LOGO! can now be connected to the
AS-Interface system
■ Ordering data
AS-Interface connection for
LOGO!
Article No.
3RK1400-0CE10-0AA2
2
AS-Interface connection for LOGO!
Using the AS-Interface connection for LOGO!, an intelligent
slave can be integrated in the AS-Interface system. With the
modular interface it becomes possible to integrate the different
basic units in the system according to their functionality. Similarly, functionalities can be quickly and easily adapted to new requirements by exchanging the basic unit.
The interface module provides four inputs and four outputs on
the system. These inputs and outputs do not actually exist in
hardware terms, however, but are only virtually present through
the interface on the bus.
Siemens ST 70 · 2015
2/37
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Overview
operation with direct voltage, the wide operating temperature
range, comprehensive certifications as well as the switch-on
behavior optimized for capacitive loads makes them suitable for
universal use. These reliable power supplies with their flat,
stepped profile can be used extremely flexibly in numerous
applications such as in distribution boards, for example.
2
To further increase the 24 V availability, the LOGO!Power power
supplies can be combined with DC UPS, redundancy and
selectivity modules.
The flat power supply unit for distribution boards
Our new miniature power supply units in the same design as the
logic modules offer great performance in the smallest space:
Efficiency has been improved across the entire load range, and
the low power losses in no-load operation ensure efficient
operation. The wide-range input for 1-phase networks as well as
Main product highlights
• 5 V DC/ 3 A and 6.3 A, 12 V DC/ 1.9 A and 4.5 A,
15 V DC/ 1.9 A and 4 A as well as 24 V DC/ 1.3 A, 2.5 A and 4 A
• 1-phase, wide-range input for 85 V to 264 V AC or
110 V to 300 V DC
• Flat LOGO! design with an installation depth of only 55 mm
• High efficiency across the entire load range, low no-load
losses
• Power reserve on starting up through 1.5 times the rated
current for capacitive loads
• Wide temperature range from -20 to +70 °C
• Comprehensive certifications, such as cULus, CB, FM, ATEX,
cCSAus Class I Div. 2, GL and ABS
■ Technical specifications
Article number
6EP1311-1SH03
6EP1311-1SH13
Product
LOGO!Power
LOGO!Power
Power supply, type
5 V/3 A
5 V/6.3 A
Input
1-phase AC or DC
1-phase AC or DC
Rated voltage value Vin rated
100 ... 240 V
100 ... 240 V
Voltage range AC
85 ... 264 V
85 ... 264 V
• for DC
110 ... 300 V
110 ... 300 V
Wide-range input
Yes
Yes
Overvoltage resistance
2.3 × Vin rated, 1.3 ms
2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min.
40 ms; at Vin = 187 V
40 ms; at Vin = 187 V
Rated line frequency
50 ... 60 Hz
50 ... 60 Hz
Rated line range
47 ... 63 Hz
47 ... 63 Hz
• at rated input voltage 120 V
0.36 A
0.71 A
• at rated input voltage 230 V
0.22 A
0.37 A
Switch-on current limiting (+25 °C),
max.
26 A
50 A
I²t, max.
0.8 A²·s
3 A²·s
Built-in incoming fuse
internal
internal
Protection in the mains power input
(IEC 60898)
Recommended miniature circuit breaker: from 16 A
characteristic B or from 10 A characteristic C
Recommended miniature circuit breaker: from 16 A
characteristic B or from 10 A characteristic C
Input
Input voltage
Input current
2/38
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
Article number
6EP1311-1SH03
6EP1311-1SH13
Product
LOGO!Power
LOGO!Power
Power supply, type
5 V/3 A
5 V/6.3 A
Output
Controlled, isolated DC voltage
Controlled, isolated DC voltage
Rated voltage Vout DC
5V
5V
Total tolerance, static ±
3%
3%
Static mains compensation, approx.
0.2 %
0.1 %
Static load balancing, approx.
1.5 %
2%
Residual ripple peak-peak, max.
100 mV
100 mV
Residual ripple peak-peak, typ.
10 mV
15 mV
Spikes peak-peak, max.
(bandwidth: 20 MHz)
100 mV
100 mV
Spikes peak-peak, typ.
(bandwidth: 20 MHz)
20 mV
70 mV
Adjustment range
4.6 ... 5.4 V
4.6 ... 5.4 V
Product function Output voltage
adjustable
Yes
Yes
Output voltage setting
via potentiometer
via potentiometer
Status display
Green LED for output voltage OK
Green LED for output voltage OK
On/off behavior
No overshoot of Vout (soft start)
No overshoot of Vout (soft start)
Startup delay, max.
0.5 s
0.5 s
Voltage rise, typ.
20 ms
10 ms
Rated current value Iout rated
3A
6.3 A
Current range
0 ... 3 A
0 ... 6.3 A
• Note
+55 ... +70 °C: Derating 2%/K
+55 ... +70 °C: Derating 2%/K
Active power supplied typical
15 W
30 W
Parallel switching for enhanced
performance
Yes
Yes
Numbers of parallel switchable units
for enhanced performance
2
2
Efficiency at Vout rated, Iout rated,
approx.
77 %
83 %
Power loss at Vout rated, Iout rated,
approx.
4W
6W
Active power loss during no-load
operation maximum
1.5 W
1.5 W
Dynamic mains compensation
(Vin rated ±15 %), max.
0.2 %
0.2 %
Dynamic load smoothing
(Iout: 10/90/10 %), Uout ± typ.
3%
3%
2
Output
Efficiency
Closed-loop control
Load step setting time 10 to 90%, typ. 2 ms
2 ms
Load step setting time 90 to 10%, typ. 2 ms
2 ms
Protection and monitoring
Output overvoltage protection
Yes, according to EN 60950-1
Yes, according to EN 60950-1
Current limitation, typ.
3.8 A
8.2 A
Property of the output
Short-circuit proof
Yes
Yes
Short-circuit protection
Constant current characteristic
Constant current characteristic
• maximum
5A
10 A
Overload/short-circuit indicator
-
-
Enduring short circuit current
RMS value
Siemens ST 70 · 2015
2/39
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
2
Article number
6EP1311-1SH03
6EP1311-1SH13
Product
LOGO!Power
LOGO!Power
Power supply, type
5 V/3 A
5 V/6.3 A
Primary/secondary isolation
Yes
Yes
Galvanic isolation
Safety extra-low output voltage Uout acc. to EN 60950-1
and EN 50178
Safety extra-low output voltage Uout acc. to EN 60950-1
and EN 50178
Safety
Protection class
Class II (without protective conductor)
Class II (without protective conductor)
CE mark
Yes
Yes
UL/CSA approval
Yes
Yes
UL/cUL (CSA) approval
cULus-Listed (UL 508, CSA C22.2 No. 107.1),
File E197259; cURus-Recognized (UL 60950, CSA C22.2
No. 60950), File E151273, NEC class 2 (acc. to UL 1310)
cULus-listed (UL 508, CSA C22.2 No. 107.1),
File E197259; cURus-recognized (UL 60950, CSA C22.2
No. 60950), File E151273
Explosion protection
ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2
No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2,
Group ABCD, T4
ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2
No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2,
Group ABCD, T4
Certificate of suitability IECEx
No
No
Certificate of suitability NEC Class 2
Yes
No
FM approval
Class I, Div. 2, Group ABCD, T4
Class I, Div. 2, Group ABCD, T4
CB approval
Yes
Yes
Marine approval
GL, ABS
GL, ABS
Degree of protection (EN 60529)
IP20
IP20
Emitted interference
EN 55022 Class B
EN 55022 Class B
Supply harmonics limitation
not applicable
not applicable
Noise immunity
EN 61000-6-2
EN 61000-6-2
-20 ... +70 °C
-20 ... +70 °C
with natural convection
with natural convection
• during transport
-40 ... +85 °C
-40 ... +85 °C
• during storage
-40 ... +85 °C
-40 ... +85 °C
Humidity class according to
EN 60721
Climate class 3K3, no condensation
Climate class 3K3, no condensation
screw-type terminals
screw-type terminals
• Supply input
L, N: 1 screw terminal each for 0.5 ... 2.5 mm²
single-core/finely stranded
L, N: 1 screw terminal each for 0.5 ... 2.5 mm²
single-core/finely stranded
• Output
+, -: 2 screw terminals each for 0.5 ... 2.5 mm²
+, -: 2 screw terminals each for 0.5 ... 2.5 mm²
• Auxiliary
-
-
Width of the enclosure
54 mm
72 mm
Height of the enclosure
90 mm
90 mm
Depth of the enclosure
52.6 mm
52.6 mm
Weight, approx.
0.17 kg
0.25 kg
Product property of the enclosure
housing for side-by-side mounting
Yes
Yes
Installation
Snaps onto DIN rail EN 60715 35x7.5/15
Snaps onto DIN rail EN 60715 35x7.5/15
Other information
Specifications at rated input voltage and ambient
temperature +25 °C (unless otherwise specified)
Specifications at rated input voltage and ambient
temperature +25 °C (unless otherwise specified)
EMC
Operating data
Ambient temperature
• during operation
- Note
Mechanics
Connection technology
Connections
2/40
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
Article number
6EP1321-1SH03
6EP1322-1SH03
Product
LOGO!Power
LOGO!Power
Power supply, type
12 V/1.9 A
12 V/4.5 A
Input
1-phase AC or DC
1-phase AC or DC
Rated voltage value Vin rated
100 ... 240 V
100 ... 240 V
Voltage range AC
85 ... 264 V
85 ... 264 V
• for DC
110 ... 300 V
110 ... 300 V
Wide-range input
Yes
Yes
Overvoltage resistance
2.3 × Vin rated, 1.3 ms
2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min.
40 ms; at Vin = 187 V
40 ms; at Vin = 187 V
Rated line frequency
50 ... 60 Hz
50 ... 60 Hz
Rated line range
47 ... 63 Hz
47 ... 63 Hz
• at rated input voltage 120 V
0.53 A
1.13 A
• at rated input voltage 230 V
0.3 A
0.61 A
Switch-on current limiting (+25 °C),
max.
25 A
55 A
I²t, max.
0.8 A²·s
3 A²·s
Built-in incoming fuse
internal
internal
Protection in the mains power input
(IEC 60898)
Recommended miniature circuit breaker: from 16 A
characteristic B or from 10 A characteristic C
Recommended miniature circuit breaker: from 16 A
characteristic B or from 10 A characteristic C
Output
Controlled, isolated DC voltage
Controlled, isolated DC voltage
Rated voltage Vout DC
12 V
12 V
Total tolerance, static ±
3%
3%
Static mains compensation, approx.
0.1 %
0.1 %
Static load balancing, approx.
1.5 %
1.5 %
Residual ripple peak-peak, max.
200 mV
200 mV
Residual ripple peak-peak, typ.
10 mV
10 mV
Spikes peak-peak, max.
(bandwidth: 20 MHz)
300 mV
300 mV
Spikes peak-peak, typ.
(bandwidth: 20 MHz)
20 mV
70 mV
Adjustment range
10.5 ... 16.1 V
10.5 ... 16.1 V
Product function Output voltage
adjustable
Yes
Yes
Output voltage setting
via potentiometer
via potentiometer
Status display
Green LED for output voltage OK
Green LED for output voltage OK
On/off behavior
No overshoot of Vout (soft start)
No overshoot of Vout (soft start)
Startup delay, max.
0.5 s
0.5 s
Voltage rise, typ.
10 ms
10 ms
Rated current value Iout rated
1.9 A
4.5 A
Current range
0 ... 1.9 A
0 ... 4.5 A
• Note
+55 ... +70 °C: Derating 2%/K
+55 ... +70 °C: Derating 2%/K
Active power supplied typical
23 W
50 W
Parallel switching for enhanced
performance
Yes
Yes
Numbers of parallel switchable units
for enhanced performance
2
2
Efficiency at Vout rated, Iout rated,
approx.
80 %
85 %
Power loss at Vout rated, Iout rated,
approx.
5W
10 W
Active power loss during no-load
operation maximum
1.8 W
1.9 W
2
Input
Input voltage
Input current
Output
Efficiency
Siemens ST 70 · 2015
2/41
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
2
Article number
6EP1321-1SH03
6EP1322-1SH03
Product
LOGO!Power
LOGO!Power
Power supply, type
12 V/1.9 A
12 V/4.5 A
Dynamic mains compensation
(Vin rated ±15 %), max.
0.2 %
0.2 %
Dynamic load smoothing
(Iout: 10/90/10 %), Uout ± typ.
3%
4%
Closed-loop control
Load step setting time 10 to 90%, typ. 1 ms
1 ms
Load step setting time 90 to 10%, typ. 1 ms
1 ms
Protection and monitoring
Output overvoltage protection
Yes, according to EN 60950-1
Yes, according to EN 60950-1
Current limitation, typ.
2.8 A
5.8 A
Property of the output
Short-circuit proof
Yes
Yes
Short-circuit protection
Constant current characteristic
Constant current characteristic
• maximum
3.6 A
7A
Overload/short-circuit indicator
-
-
Primary/secondary isolation
Yes
Yes
Galvanic isolation
Safety extra-low output voltage Uout acc. to EN 60950-1
and EN 50178
Safety extra-low output voltage Uout acc. to EN 60950-1
and EN 50178
Enduring short circuit current
RMS value
Safety
Protection class
Class II (without protective conductor)
Class II (without protective conductor)
CE mark
Yes
Yes
UL/CSA approval
Yes
Yes
UL/cUL (CSA) approval
cULus-Listed (UL 508, CSA C22.2 No. 107.1),
File E197259; cURus-Recognized (UL 60950, CSA C22.2
No. 60950), File E151273, NEC class 2 (acc. to UL 1310)
cULus-listed (UL 508, CSA C22.2 No. 107.1),
File E197259; cURus-recognized (UL 60950, CSA C22.2
No. 60950), File E151273
Explosion protection
ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2
No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2,
Group ABCD, T4
ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2
No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2,
Group ABCD, T4
Certificate of suitability IECEx
No
No
Certificate of suitability NEC Class 2
Yes
No
FM approval
Class I, Div. 2, Group ABCD, T4
Class I, Div. 2, Group ABCD, T4
CB approval
Yes
Yes
Marine approval
GL, ABS
GL, ABS
Degree of protection (EN 60529)
IP20
IP20
Emitted interference
EN 55022 Class B
EN 55022 Class B
Supply harmonics limitation
not applicable
not applicable
Noise immunity
EN 61000-6-2
EN 61000-6-2
-20 ... +70 °C
-20 ... +70 °C
with natural convection
with natural convection
• during transport
-40 ... +85 °C
-40 ... +85 °C
• during storage
-40 ... +85 °C
-40 ... +85 °C
Humidity class according to
EN 60721
Climate class 3K3, no condensation
Climate class 3K3, no condensation
EMC
Operating data
Ambient temperature
• during operation
- Note
2/42
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
Article number
6EP1321-1SH03
6EP1322-1SH03
Product
LOGO!Power
LOGO!Power
Power supply, type
12 V/1.9 A
12 V/4.5 A
screw-type terminals
screw-type terminals
• Supply input
L, N: 1 screw terminal each for 0.5 ... 2.5 mm²
single-core/finely stranded
L, N: 1 screw terminal each for 0.5 ... 2.5 mm²
single-core/finely stranded
• Output
+, -: 2 screw terminals each for 0.5 ... 2.5 mm²
+, -: 2 screw terminals each for 0.5 ... 2.5 mm²
• Auxiliary
-
-
Width of the enclosure
54 mm
72 mm
Height of the enclosure
90 mm
90 mm
Depth of the enclosure
52.6 mm
52.6 mm
Weight, approx.
0.17 kg
0.25 kg
Product property of the enclosure
housing for side-by-side mounting
Yes
Yes
Installation
Snaps onto DIN rail EN 60715 35x7.5/15
Snaps onto DIN rail EN 60715 35x7.5/15
Other information
Specifications at rated input voltage and ambient
temperature +25 °C (unless otherwise specified)
Specifications at rated input voltage and ambient
temperature +25 °C (unless otherwise specified)
Article number
6EP1351-1SH03
6EP1352-1SH03
Product
LOGO!Power
LOGO!Power
Power supply, type
15 V/1.9 A
15 V/4 A
Input
1-phase AC or DC
1-phase AC or DC
Rated voltage value Vin rated
100 ... 240 V
100 ... 240 V
Voltage range AC
85 ... 264 V
85 ... 264 V
• for DC
110 ... 300 V
110 ... 300 V
Wide-range input
Yes
Yes
Overvoltage resistance
2.3 × Vin rated, 1.3 ms
2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min.
40 ms; at Vin = 187 V
40 ms; at Vin = 187 V
Rated line frequency
50 ... 60 Hz
50 ... 60 Hz
Rated line range
47 ... 63 Hz
47 ... 63 Hz
• at rated input voltage 120 V
0.63 A
1.24 A
• at rated input voltage 230 V
0.33 A
0.68 A
Switch-on current limiting (+25 °C),
max.
25 A
55 A
I²t, max.
0.8 A²·s
3 A²·s
Built-in incoming fuse
internal
internal
Protection in the mains power input
(IEC 60898)
Recommended miniature circuit breaker: from 16 A
characteristic B or from 10 A characteristic C
Recommended miniature circuit breaker: from 16 A
characteristic B or from 10 A characteristic C
2
Mechanics
Connection technology
Connections
Input
Input voltage
Input current
Siemens ST 70 · 2015
2/43
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
2
Article number
6EP1351-1SH03
6EP1352-1SH03
Product
LOGO!Power
LOGO!Power
Power supply, type
15 V/1.9 A
15 V/4 A
Output
Controlled, isolated DC voltage
Controlled, isolated DC voltage
Rated voltage Vout DC
15 V
15 V
Total tolerance, static ±
3%
3%
Static mains compensation, approx.
0.1 %
0.1 %
Static load balancing, approx.
1.5 %
1.5 %
Residual ripple peak-peak, max.
200 mV
200 mV
Residual ripple peak-peak, typ.
10 mV
10 mV
Spikes peak-peak, max.
(bandwidth: 20 MHz)
300 mV
300 mV
Spikes peak-peak, typ.
(bandwidth: 20 MHz)
30 mV
70 mV
Adjustment range
10.5 ... 16.1 V
10.5 ... 16.1 V
Product function
Output voltage adjustable
Yes
Yes
Output voltage setting
via potentiometer
via potentiometer
Status display
Green LED for output voltage OK
Green LED for output voltage OK
On/off behavior
No overshoot of Vout (soft start)
No overshoot of Vout (soft start)
Startup delay, max.
0.5 s
0.5 s
Voltage rise, typ.
15 ms
15 ms
Rated current value Iout rated
1.9 A
4A
Current range
0 ... 1.9 A
0 ... 4 A
• Note
+55 ... +70 °C: Derating 2%/K
+55 ... +70 °C: Derating 2%/K
Active power supplied typical
23 W
50 W
Parallel switching for enhanced
performance
Yes
Yes
Numbers of parallel switchable units
for enhanced performance
2
2
Efficiency at Vout rated, Iout rated,
approx.
81 %
85 %
Power loss at Vout rated, Iout rated,
approx.
7W
11 W
Active power loss during no-load
operation maximum
2W
2.3 W
Dynamic mains compensation
(Vin rated ±15 %), max.
0.2 %
0.2 %
Dynamic load smoothing
(Iout: 10/90/10 %), Uout ± typ.
2.8 %
3%
Output
Efficiency
Closed-loop control
Load step setting time 10 to 90%, typ. 1 ms
1 ms
Load step setting time 90 to 10%, typ. 1 ms
1 ms
Protection and monitoring
Output overvoltage protection
Yes, according to EN 60950-1
Yes, according to EN 60950-1
Current limitation, typ.
2.7 A
5.7 A
Property of the output
Short-circuit proof
Yes
Yes
Short-circuit protection
Constant current characteristic
Constant current characteristic
• maximum
3.6 A
7A
Overload/short-circuit indicator
-
-
Enduring short circuit current
RMS value
2/44
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
Article number
6EP1351-1SH03
6EP1352-1SH03
Product
LOGO!Power
LOGO!Power
Power supply, type
15 V/1.9 A
15 V/4 A
Primary/secondary isolation
Yes
Yes
Galvanic isolation
Safety extra-low output voltage Uout acc. to EN 60950-1
and EN 50178
Safety extra-low output voltage Uout acc. to EN 60950-1
and EN 50178
2
Safety
Protection class
Class II (without protective conductor)
Class II (without protective conductor)
CE mark
Yes
Yes
UL/CSA approval
Yes
Yes
UL/cUL (CSA) approval
cULus-Listed (UL 508, CSA C22.2 No. 107.1),
File E197259; cURus-Recognized (UL 60950, CSA C22.2
No. 60950), File E151273, NEC class 2 (acc. to UL 1310)
cULus-Listed (UL 508, CSA C22.2 No. 107.1),
File E197259; cURus-Recognized (UL 60950, CSA C22.2
No. 60950), File E151273, NEC class 2 (acc. to UL 1310)
Explosion protection
ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2
No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2,
Group ABCD, T4
ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2
No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2,
Group ABCD, T4
Certificate of suitability IECEx
No
No
Certificate of suitability NEC Class 2
Yes
Yes
FM approval
Class I, Div. 2, Group ABCD, T4
Class I, Div. 2, Group ABCD, T4
CB approval
Yes
Yes
Marine approval
GL, ABS
GL, ABS
Degree of protection (EN 60529)
IP20
IP20
Emitted interference
EN 55022 Class B
EN 55022 Class B
Supply harmonics limitation
not applicable
not applicable
Noise immunity
EN 61000-6-2
EN 61000-6-2
-20 ... +70 °C
-20 ... +70 °C
with natural convection
with natural convection
• during transport
-40 ... +85 °C
-40 ... +85 °C
• during storage
-40 ... +85 °C
-40 ... +85 °C
Humidity class according to
EN 60721
Climate class 3K3, no condensation
Climate class 3K3, no condensation
screw-type terminals
screw-type terminals
• Supply input
L, N: 1 screw terminal each for 0.5 ... 2.5 mm²
single-core/finely stranded
L, N: 1 screw terminal each for 0.5 ... 2.5 mm²
single-core/finely stranded
• Output
+, -: 2 screw terminals each for 0.5 ... 2.5 mm²
+, -: 2 screw terminals each for 0.5 ... 2.5 mm²
• Auxiliary
-
-
Width of the enclosure
54 mm
72 mm
Height of the enclosure
90 mm
90 mm
Depth of the enclosure
52.6 mm
52.6 mm
Weight, approx.
0.17 kg
0.25 kg
Product property of the enclosure
housing for side-by-side mounting
Yes
Yes
Installation
Snaps onto DIN rail EN 60715 35x7.5/15
Snaps onto DIN rail EN 60715 35x7.5/15
Other information
Specifications at rated input voltage and ambient
temperature +25 °C (unless otherwise specified)
Specifications at rated input voltage and ambient
temperature +25 °C (unless otherwise specified)
EMC
Operating data
Ambient temperature
• during operation
- Note
Mechanics
Connection technology
Connections
Siemens ST 70 · 2015
2/45
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
2
Article number
6EP1331-1SH03
6EP1332-1SH43
6EP1332-1SH52
Product
LOGO!Power
LOGO!Power
LOGO!Power
Power supply, type
24 V/1.3 A
24 V/2.5 A
24 V/4 A
Input
1-phase AC or DC
1-phase AC or DC
1-phase AC or DC
Rated voltage value Vin rated
100 ... 240 V
100 ... 240 V
100 ... 240 V
Voltage range AC
85 ... 264 V
85 ... 264 V
85 ... 264 V
• for DC
110 ... 300 V
110 ... 300 V
110 ... 300 V
Wide-range input
Yes
Yes
Yes
Overvoltage resistance
2.3 × Vin rated, 1.3 ms
2.3 × Vin rated, 1.3 ms
2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min.
40 ms; at Vin = 187 V
40 ms; at Vin = 187 V
40 ms; at Vin = 187 V
Rated line frequency
50 ... 60 Hz
50 ... 60 Hz
50 ... 60 Hz
Rated line range
47 ... 63 Hz
47 ... 63 Hz
47 ... 63 Hz
• at rated input voltage 120 V
0.7 A
1.22 A
1.95 A
• at rated input voltage 230 V
0.35 A
0.66 A
0.97 A
Switch-on current limiting (+25 °C),
max.
25 A
46 A
30 A
I²t, max.
0.8 A²·s
3 A²·s
2.5 A²·s
Built-in incoming fuse
internal
internal
internal
Protection in the mains power input
(IEC 60898)
Recommended miniature circuit
breaker: from 16 A characteristic B or
from 10 A characteristic C
Recommended miniature circuit
breaker: from 16 A characteristic B or
from 10 A characteristic C
Recommended miniature circuit
breaker: from 16 A characteristic B or
from 10 A characteristic C
Output
Controlled, isolated DC voltage
Controlled, isolated DC voltage
Controlled, isolated DC voltage
Rated voltage Vout DC
24 V
24 V
24 V
Total tolerance, static ±
3%
3%
3%
Static mains compensation, approx.
0.1 %
0.1 %
0.1 %
Static load balancing, approx.
1.5 %
1.5 %
1.5 %
Residual ripple peak-peak, max.
200 mV
200 mV
200 mV
Residual ripple peak-peak, typ.
10 mV
10 mV
30 mV
Spikes peak-peak, max.
(bandwidth: 20 MHz)
300 mV
300 mV
300 mV
Spikes peak-peak, typ.
(bandwidth: 20 MHz)
20 mV
50 mV
60 mV
Adjustment range
22.2 ... 26.4 V
22.2 ... 26.4 V
22.2 ... 26.4 V
Product function
Output voltage adjustable
Yes
Yes
Yes
Output voltage setting
via potentiometer
via potentiometer
via potentiometer
Status display
Green LED for output voltage OK
Green LED for output voltage OK
Green LED for output voltage OK
On/off behavior
No overshoot of Vout (soft start)
No overshoot of Vout (soft start)
No overshoot of Vout (soft start)
Startup delay, max.
0.5 s
0.5 s
0.5 s
Voltage rise, typ.
15 ms
10 ms
15 ms
Rated current value Iout rated
1.3 A
2.5 A
4A
Current range
0 ... 1.3 A
0 ... 2.5 A
0 ... 4 A
• Note
+55 ... +70 °C: Derating 2%/K
+55 ... +70 °C: Derating 2%/K
+55 ... +70 °C: Derating 2%/K
Active power supplied typical
30 W
60 W
96 W
Parallel switching for enhanced
performance
Yes
Yes
Yes
Numbers of parallel switchable units
for enhanced performance
2
2
2
Efficiency at Vout rated, Iout rated,
approx.
85 %
88 %
89 %
Power loss at Vout rated, Iout rated,
approx.
6W
8W
12 W
Active power loss during no-load
operation maximum
2W
1.8 W
2W
Input
Input voltage
Input current
Output
Efficiency
2/46
Siemens ST 70 · 2015
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Technical specifications (continued)
Article number
6EP1331-1SH03
6EP1332-1SH43
6EP1332-1SH52
Product
LOGO!Power
LOGO!Power
LOGO!Power
Power supply, type
24 V/1.3 A
24 V/2.5 A
24 V/4 A
Dynamic mains compensation
(Vin rated ±15 %), max.
0.2 %
0.2 %
0.2 %
Dynamic load smoothing
(Iout: 10/90/10 %), Uout ± typ.
1%
2%
1.5 %
Load step setting time 10 to 90%, typ. 1 ms
1 ms
1 ms
Load step setting time 90 to 10%, typ. 1 ms
1 ms
1 ms
2
Closed-loop control
Protection and monitoring
Output overvoltage protection
Yes, according to EN 60950-1
Yes, according to EN 60950-1
Yes, according to EN 60950-1
Current limitation, typ.
1.7 A
3.3 A
5.2 A
Property of the output
Short-circuit proof
Yes
Yes
Yes
Short-circuit protection
Constant current characteristic
Constant current characteristic
Constant current characteristic
• maximum
2.4 A
4.8 A
7.9 A
Overload/short-circuit indicator
-
-
-
Primary/secondary isolation
Yes
Yes
Yes
Galvanic isolation
Safety extra-low output voltage Uout
acc. to EN 60950-1 and EN 50178
Safety extra-low output voltage Uout
acc. to EN 60950-1 and EN 50178
Safety extra-low output voltage Uout
acc. to EN 60950-1 and EN 50178
Enduring short circuit current
RMS value
Safety
Protection class
Class II (without protective conductor) Class II (without protective conductor) Class II (without protective conductor)
CE mark
Yes
Yes
Yes
UL/CSA approval
Yes
Yes
Yes
UL/cUL (CSA) approval
cULus-Listed (UL 508, CSA C22.2
No. 107.1), File E197259;
cURus-Recognized (UL 60950,
CSA C22.2 No. 60950), File E151273,
NEC class 2 (acc. to UL 1310)
cULus-Listed (UL 508, CSA C22.2
No. 107.1), File E197259;
cURus-Recognized (UL 60950,
CSA C22.2 No. 60950), File E151273,
NEC class 2 (acc. to UL 1310)
cULus-listed (UL 508, CSA C22.2
No. 107.1), File E197259;
cURus-recognized (UL 60950,
CSA C22.2 No. 60950), File E151273
Explosion protection
ATEX (EX) II 3G Ex nA IIC T3;
cCSAus (CSA C22.2 No. 213-M1987,
ANSI/ISA-12.12.01-2007) Class I,
Div. 2, Group ABCD, T4
ATEX (EX) II 3G Ex nA IIC T3;
cCSAus (CSA C22.2 No. 213-M1987,
ANSI/ISA-12.12.01-2007) Class I,
Div. 2, Group ABCD, T4
ATEX (EX) II 3G Ex nA IIC T3;
cCSAus (CSA C22.2 No. 213-M1987,
ANSI/ISA-12.12.01-2007) Class I,
Div. 2, Group ABCD, T4
Certificate of suitability IECEx
No
No
No
Certificate of suitability NEC Class 2
Yes
Yes
No
FM approval
Class I, Div. 2, Group ABCD, T4
Class I, Div. 2, Group ABCD, T4
Class I, Div. 2, Group ABCD, T4
CB approval
Yes
Yes
Yes
Marine approval
GL, ABS, BV, DNV, LRS
GL, ABS, BV, DNV, LRS
GL, ABS, BV, DNV, LRS
Degree of protection (EN 60529)
IP20
IP20
IP20
Emitted interference
EN 55022 Class B
EN 55022 Class B
EN 55022 Class B
Supply harmonics limitation
not applicable
not applicable
EN 61000-3-2
Noise immunity
EN 61000-6-2
EN 61000-6-2
EN 61000-6-2
-20 ... +70 °C
-20 ... +70 °C
-20 ... +70 °C
with natural convection
with natural convection
with natural convection
• during transport
-40 ... +85 °C
-40 ... +85 °C
-40 ... +85 °C
• during storage
-40 ... +85 °C
-40 ... +85 °C
-40 ... +85 °C
Humidity class according to
EN 60721
Climate class 3K3, no condensation
Climate class 3K3, no condensation
Climate class 3K3, no condensation
EMC
Operating data
Ambient temperature
• during operation
- Note
Siemens ST 70 · 2015
2/47
© Siemens AG 2015
LOGO! logic module
LOGO!Power
LOGO!Power
■ Ordering data Article No. Article No. (continued)
2
Article number
6EP1331-1SH03
6EP1332-1SH43
6EP1332-1SH52
Product
LOGO!Power
LOGO!Power
LOGO!Power
Power supply, type
24 V/1.3 A
24 V/2.5 A
24 V/4 A
screw-type terminals
screw-type terminals
screw-type terminals
• Supply input
L, N: 1 screw terminal each
for 0.5 ... 2.5 mm²
single-core/finely stranded
L, N: 1 screw terminal each
for 0.5 ... 2.5 mm²
single-core/finely stranded
L, N: 1 screw terminal each
for 0.5 ... 2.5 mm²
single-core/finely stranded
• Output
+, -: 2 screw terminals each
for 0.5 ... 2.5 mm²
+, -: 2 screw terminals each
for 0.5 ... 2.5 mm²
+, -: 2 screw terminals each
for 0.5 ... 2.5 mm²
• Auxiliary
-
-
-
Width of the enclosure
54 mm
72 mm
90 mm
Height of the enclosure
90 mm
90 mm
90 mm
Depth of the enclosure
52.6 mm
52.6 mm
52.6 mm
Weight, approx.
0.17 kg
0.25 kg
0.34 kg
Product property of the enclosure
housing for side-by-side mounting
Yes
Yes
Yes
Installation
Snaps onto DIN rail
EN 60715 35x7.5/15
Snaps onto DIN rail
EN 60715 35x7.5/15
Snaps onto DIN rail
EN 60715 35x7.5/15
Other information
Specifications at rated input voltage
and ambient temperature +25 °C
(unless otherwise specified)
Specifications at rated input voltage
and ambient temperature +25 °C
(unless otherwise specified)
Specifications at rated input voltage
and ambient temperature +25 °C
(unless otherwise specified)
Mechanics
Connection technology
Connections
■ Ordering data
Article No.
LOGO!Power 1-phase,
5 V DC/3 A
Stabilized power supply
Input: 100 ... 240 V AC
Output: 5 V DC/3 A
LOGO!Power 1-phase,
15 V DC/4 A
6EP1311-1SH03
LOGO!Power 1-phase,
5 V DC/6.3 A
Stabilized power supply
Input: 100 ... 240 V AC
Output: 5 V DC/6.3 A
6EP1311-1SH13
6EP1352-1SH03
Stabilized power supply
Input: 100 ... 240 V AC
Output: 24 V DC/1.3 A
6EP1331-1SH03
LOGO!Power 1-phase,
24 V DC/2.5 A
6EP1321-1SH03
LOGO!Power 1-phase,
12 V DC/4.5 A
Stabilized power supply
Input: 100 ... 240 V AC
Output: 12 V DC/4.5 A
Stabilized power supply
Input: 100 ... 240 V AC
Output: 15 V DC/4 A
LOGO!Power 1-phase,
24 V DC/1.3 A
LOGO!Power 1-phase,
12 V DC/1.9 A
Stabilized power supply
Input: 100 ... 240 V AC
Output: 12 V DC/1.9 A
Article No.
Stabilized power supply
Input: 100 ... 240 V AC
Output: 24 V DC/2.5 A
6EP1332-1SH43
LOGO!Power 1-phase,
24 V DC/4 A
6EP1322-1SH03
Stabilized power supply
Input: 100 ... 240 V AC
Output: 24 V DC/4 A
6EP1332-1SH52
LOGO!Power 1-phase,
15 V DC/1.9 A
Stabilized power supply
Input: 100 ... 240 V AC
Output: 15 V DC/1.9 A
6EP1351-1SH03
■ More information
In addition to various power supply product lines, the perfectly
coordinated complete SITOP range offers a unique range of
add-on modules with which the 24 V power supply can be additionally protected against interference on the primary and secondary side – right up to all-round protection:
• Redundancy module for setting up a redundant power supply
• Uninterruptible 24 V power supplies with batteries or maintenance-free capacitors for continued operation in the event of
power failure
• Selectivity modules for electronic protection of 24 V branches
from overload and short-circuit
2/48
Siemens ST 70 · 2015
You can find more information in Catalog KT 10.1 and on the
Internet at:
www.siemens.com/sitop
Select the appropriate power supply quickly and easily with the
SITOP Selection Tool:
http://www.siemens.com/sitop-selection-tool
© Siemens AG 2015
LOGO! logic module
SIPLUS LOGO!Power
SIPLUS LOGO!Power
■ Overview
■ Ordering data
Note:
SIPLUS LOGO!Power 24 V 1.3 A
SIPLUS extreme products are based on Siemens Industry
standard products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific
information was added.
Input 100 ... 240 V AC
Output 24 V DC, 1.3 A
Extended temperature range and
exposure to media
Article No.
2
6AG1331-1SH03-7AA0
SIPLUS LOGO!Power 24 V 2.5 A
SIPLUS LOGO!Power 1.3 A
Article number
6AG1331-1SH03-7AA0
Article number based on
6EP1331-1SH03
Ambient temperature range
-25 °C to +70 °C
Conformal coating
Coating of the printed circuit boards
and the electronic components
Technical data
The technical data of the standard
product applies except for the
ambient conditions.
Input 100 ... 240 V AC
Output 24 V DC, 2.5 A
Extended temperature range and
exposure to media
6AG1332-1SH43-7AA0
SIPLUS LOGO!Power 24 V 4 A
Input 100 ... 240 V AC
Output 24 V DC, 4 A
Extended temperature range and
exposure to media
6AG1332-1SH52-7AA0
Ambient conditions
Relative humidity
100%, condensation/frost
permissible. No commissioning if
condensation present.
Biologically active substances,
compliance with EN 60721-3-3
Class 3B2 mold spores, fungal
spores (excluding fauna).
The supplied plug covers must
remain in place over the unused
interfaces during operation!
Chemically active substances,
compliance with EN 60721-3-3
Class 3C4 incl. salt spray in
accordance with EN60068-2-52
(degree of severity 3). The supplied
plug covers must remain in place
over the unused interfaces during
operation!
Mechanically active substances,
compliance with EN 60721-3-3
Class 3S4 incl. sand, dust. The
supplied plug covers must remain in
place over the unused interfaces
during operation!
Air pressure (depending on the
highest positive temperature range
specified)
1080 ... 795 hPa (-1000 ... +2000 m)
see ambient temperature range
795 ... 658 hPa (+2000 ... +3500 m)
derating 10 K
658 ... 540 hPa (+3500 ... +5000 m)
derating 20 K
For technical documentation on SIPLUS, see:
http://www.siemens.com/siplus-extreme
Siemens ST 70 · 2015
2/49
© Siemens AG 2015
LOGO! logic module
LOGO!Contact
LOGO!Contact
■ Overview
■ Technical specifications
Article number
2
6ED1057-4CA00- 6ED1057-4EA000AA0
0AA0
LOGO! CONTACT LOGO! CONTACT
MOD., DC 24V,
MOD., AC 230V,
3NO/1NC
3NO/1NC
Product type designation
Weights
Weight, approx.
■ Ordering data
160 g
160 g
Article No.
LOGO!Contact
Switching module for direct
switching of resistive loads up to
20 A and motors up to 4 kW
• Switching module for the direct switching of resistive loads
and motors
2/50
Siemens ST 70 · 2015
Switching voltage 24 V
6ED1057-4CA00-0AA0
Switching voltage 230 V
6ED1057-4EA00-0AA0
© Siemens AG 2015
LOGO! logic module
LOGO! Software
LOGO! Software
■ Overview
■ Ordering data
LOGO!Soft Comfort V8
Article No.
6ED1058-0BA08-0YA1
2
for programming on the PC
in LAD/FBD;
executes on Windows 8, 7, XP,
Linux and Mac OSX; on DVD
LOGO!Soft Comfort V8 Upgrade
6ED1058-0CA08-0YE1
Upgrade from V1.0 to V8.0
• The user-friendly software for generating switching programs
on the PC for single-user mode and network mode
• Generation of switching programs in a function block diagram
(FBD) or ladder logic (LAD)
• Furthermore, testing, simulation, online testing and archiving
of the switching programs
• Professional documentation due to manifold comment and
print functions
Minimum system requirements
Windows XP (32-bit), 7 (32/64-bit) or 8 (32/64-bit)
• PC Pentium IV
• 150 MB free disk capacity
• 256 MB RAM
• SVGA graphics card with minimum resolution 800 x 600
(256 colors)
• DVD-ROM
Mac OS X
• Mac OS X 10.4
Linux
• Tested with SUSE Linux 11.3 SP2, kernel 3.0.76
• Runs on all Linux distributions on which Java 2 runs.
• Please refer to your relevant Linux distribution for the
necessary hardware requirements.
Siemens ST 70 · 2015
2/51
© Siemens AG 2015
LOGO! logic module
SIPLUS add-ons
SIPLUS LOGO! PROM
LOGO! PROM is the programming device for easy reproduction
of up to 8 LOGO! program modules. Copying is performed from
a master module or via the PC program LOGO! Soft Comfort.
■ Overview
2
LOGO! PROM supports yellow and red program modules. Only
yellow modules can be used as master modules, because red
modules cannot be copied due to the know-how protection implemented.
A multi-colored LED on each module slot provides detailed information about the status of the respective program module and
the copying procedure.
■ Ordering data
LOGO! PROM
Article No.
6AG1057-1AA01-0BA6
Programming device used to
simultaneously reproduce program
module contents on up to
8 program modules
LOGO! mounting kits
■ Overview
■ Ordering data
Article No.
Front panel mounting kit
Width 4 width units
6AG1057-1AA00-0AA0
Width 4 width units, with keys
6AG1057-1AA00-0AA3
Width 8 width units
6AG1057-1AA00-0AA1
Width 8 width units, with keys
6AG1057-1AA00-0AA2
LOGO! and SIPLUS LOGO! are designed for quick and easy
mounting on standard rails. With the mounting kit, these devices
can also be easily and safely installed in front panels. If the
supplied washer and seals are used, the devices are reliably
protected against harsh environmental conditions up to the IP65
degree of protection.
SIPLUS upmiters
■ Overview
■ Ordering data
Article No.
SIPLUS upmiter upstream device
for reliable operation when
connected to the batteries of
combustion engines
The SIPLUS upmiter upstream device ensures reliable operation
of SIPLUS devices connected to the batteries of internal
combustion engines. SIPLUS upmiter provides the devices with
a constant voltage supply.
2/52
Siemens ST 70 · 2015
Output current 1.25 A
(LOGO! style)
6AG1053-1AA00-2AA0
Output current 4 A
(S7-300 style)
6AG1305-1AA00-2AA0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement