SHORT FORM CATALOG DEWETRON DEWETRON – WE SET STANDARDS DEWETRON is the market-leading producer of universal test and measurement systems. DEWETRON‘s great strengths are in supplying complete systems that are immediately ready for use while also being quickly customizable to the unique needs of the test environment. DEWETRON has more than 25 years of expertise in measurement engineering and technology. The PC-based systems are suitable for mobile use, modular in design and can therefore be extended as desired. DEWETRON systems are compatible with all common sensors available on the market. Together with our powerful measurement amplifiers, DEWETRON systems will guarantee you accurate, immediate results from your test series. DEWETRON A SUCCESS STORY DEWETRON was established in 1989 as a purveyor of PC components and measuring instruments. At that time the market for PC based measuring systems was just emerging and being identified as a promising segment with great potential for growth. In response to the potential, DEWETRON expanded into producing it’s own measurement systems and measurement software. As the test and measurement market evolved so did DEWETRON, introducing the concept of “modular logic”. The modular ap- GENERAL SOLUTIONS AUTOMOTIVE AEROSPACE ENERGY & POWER ANALYSIS TRANSPORTATION 2 proach to test and measurement combines application specific systems with customer specific requirements to create a high level of quality in a short time. Customization was a part of DEWETRON’s philosophy long before it became an industry standard. For 25 years DEWETRON has set new standards for test and measurement systems. Today, customers from more than 25 countries worldwide rely on our products for precision measurement recording and analysis. DEWETRON is certified in accordance with ISO 9001:2008 and ISO 14001:2009. Environmental and quality management is more than just a statutory obligation for us – it is an integral part of all our business processes. We continually strive to combine innovation and business success with strict quality standards and rigorous quality processes. It is for this reason that we are recognized as a reliable partner. SHORT FORM CATALOG DEWETRON CUSTOMERS There are more than 20,000 DEWETRON measuring systems and over 300,000 measuring channels in use in well known companies worldwide: PROJECT PLANNING AND CONSULTING DEWETRON systems provide the complete technical solution to test and measurement projects and DEWETRON employees provide a wide range of project planning and data management expertise. As your project partner we are always available to answer questions related to initial project planning, post implementation data management and technical support whenever you need it. WORLDWIDE SUPPORT In the world of test and measurement, testing time is often short so there is no room for downtime. Knowing this, DEWETRON provides prompt, efficient technical support worldwide. With 150 employees working in over 25 countries technical and sales support is always available and has been for more than 25 years. Our support success is measured by over 20,000 DEWETRON systems and 300,000 measurement channels in continuous use in the worldwide Automotive, Aerospace, Energy & Power Analysis, and Transportation markets. QUALITY Total Quality Management starts with an understanding of what is important to ensure the success of our customers. Our commitment to quality begins with defined technical specifications and continues through product development, delivery and on to the support and service of our products. DEWETRON is ISO 9001:2008 and ISO 1401:2009 certified. Environmental and Quality Management are more than compliance, they are an integral part of our operation. All DEWETRON products are tested at our Environmental Test Facility in Graz, Austria before being delivered. AIRBUS, AUDI, BOEING, BOMBARDIER, BRIDGESTONE, BMW, CONTINENTAL, DEUTSCHE BAHN, ELECTRO SUISSE, EADS, FERRARI, FIAT, FORD, FRAUNHOFER INSTITUTE, GOODYEAR, HARLEY DAVIDSON, HYUNDAI, HELICOPTER INSTITUTE CHINA, IVECO, JOHNSON & JOHNSON, KENNEDY SPACE CENTER, LUFTHANSA, MAGNA STEYR, MAN, MERCEDES BENZ, METRO MADRID, NEW YORK SUBWAY, NISSAN, NASA, NOKIA, OMV, PANASONIC, PIRELLI, PORSCHE, RENAULT, ROLLS ROYCE, SIEMENS, SHANGHAI GM, TOYOTA, UNIVERSITY OF VIENNA, US AIR FORCE EDWARDS FLIGHT TEST CENTER, US NAVY, VOLVO, VW, VOEST, YAMAHA AND MANY MORE. CALIBRATION DEWETRON maintains two high tech calibration labs: one at the worldwide headquarters in Austria and the other one at the DEWETRON USA headquarters in Rhode Island. Both calibration labs employ the Fluke 5500 series calibrator and the Agilent 3458 multimeter. METCAL calibration software automates nearly every process for precision calibration. Additionally to the standard calibration, we offer accredited calibration according to EN ISO/IEC 17025. 3 DEWETRON WHY DEWETRON? SYNC-CLOCK™ TECHNOLOGY COUNTER The quality of synchronized measurement is guaranteed by SYNC-CLOCK™ technology. With SYNC-CLOCK technology, analog, digital, GPS, counter, CAN-bus, ARINC and video as well as major sensor systems like Kistler RoaDyn® 2000 wheel or the GeneSys ADMA INS/GPS system are recorded synchronously during measurement. Counter/encoder inputs of TRION™ modules are phase synchronized. Referring to the diagram, you can see that a standard counter is always a sample behind. With software interpolation you can get closer, but only DEWETRON’s advanced technology is both, fully phase AND amplitude corrected. HIGHEST PRECISION TRION™ series modules easily integrate with all similar products on the market. ADC-CLOCK COUNTER INPUT IDEAL COUNTING DEWETRON COUNTER SOFTWARE INTERPOLATION STANDARD COUNTER 4 SCALABLE AND MODULAR USER EXCHANGEABLE MODULES GLOBAL SUPPORT Expand from a few channels to many and connect many systems without compromising the simultaneous data sampling of all channels. TRION™ amplifier modules can be changed in seconds. Modules with different sampling speed and resolution can be used in one chassis. Use isolated and differential inputs at the same time. Our engineers are in 25 countries around the world to support you with their knowledge and expertise. We offer maintenance, upgrades, ISO certified system calibrations and also customer training! SHORT FORM CATALOG TABLE OF CONTENTS OVERVIEW Instrument Families ..................................................................6 System Overview ......................................................................7 Unlimited Measurements with... .............................................8 ... more Channels .................................................................8 ... more Software..................................................................8 ... more Interfaces ................................................................9 ... more Performance ...........................................................9 ... more Insights ....................................................................9 TRION™ MEASUREMENT SYSTEMS TRION™ Modules ......................................................................10 TRION™ All-in-One ...................................................................11 TRION™ Mainframes ................................................................12 TRION™ Front-ends .................................................................14 with Fibre-optic & PCIe Interface .......................................14 TRION™ Front-ends .................................................................16 with USB & Ethernet Interface ..........................................16 CAN & RS485 MODULES CPAD3 ........................................................................................26 EPAD2 / CPAD2 ........................................................................27 ORION MEASUREMENT SYSTEMS ORION A/D Boards ...................................................................17 Dynamic Amplifiers ...................................................................18 High-speed Amplifiers ..............................................................20 MSI Adapter...............................................................................21 SOFTWARE PNA Software............................................................................31 OXYGEN .....................................................................................32 Power Analysis with OXYGEN.................................................34 LabVIEW™ Library ....................................................................35 DASYLab Drivers .......................................................................36 DEWETRON OEM .....................................................................37 ORION All-in-One .....................................................................22 ORION Mainframes...................................................................23 ORION Front-ends ....................................................................24 with PCIe Interface ..............................................................24 ORION Front-ends ....................................................................25 with USB & Ethernet Interface ..........................................25 CUSTOMIZED MODULAR TURNKEY SYSTEMS CVT Logger.................................................................................28 Power Analyzer .........................................................................29 Power Quality Analyzer ............................................................30 Accessories ................................................................................38 Solutions ....................................................................................39 COMPETENT COMMITTED APPROVED 5 DEWETRON INSTRUMENT FAMILIES DEWETRON data acquisition systems are categorized into two families, the DEWE2 (TRION™) and the DEWE (ORION) series. All systems of both series can record vastly different signal sources in perfect sync. The analog input modules are leading technology and guarantee precise and robust results while offering the right input for almost any sensor. Sensor Flexible connector panel Signal conditioning Filtering A/D conversion High-speed data transfer & synchronization DEWE2 SERIES WITH TRION™ MODULES DATA ACQUISITION MODULES HOUSING AND STORAGE Counter CAN bus Analog signal conditioning & A/D conversion USER EXCHANGEABLE TRION™ MODULES >> Highest precision >> Highest channel density WIDE RANGE OF HOUSINGS >> Most rugged >> Fully modular: user exchangeable modules for analog, digital, counter, CAN DEWE SERIES WITH ORION CARDS & DAQ MODULES SIGNAL CONDITIONING MODULES HOUSING AND STORAGE AND A/D CARDS Analog signal conditioning A/D CONVERSION COUNTER CAN BUS ANALOG DAQ MODULES >> Isolated or differential analog inputs >> A/D resolution 16 or 24 bit 6 WIDE RANGE OF HOUSINGS >> Separated A/D card for flexible sampling rates up to 10 MS/s DEWE-ORION A/D CARDS SHORT FORM CATALOG SYSTEM OVERVIEW Signal Conditioning Amplifier A/D Conversion Computer inside Display ALL-IN-ONE IN ADC OUT >> Built-in display >> Most compact and flexible configuration >> Powerful PC inside for fast online displays and analysis >> Most convenient for mobile applications MAINFRAME IN ADC OUT >> Powerful PC inside for fast online displays and analysis >> Can be used with external display >> Very popular for applications where the instrument is installed in a poorly accessible place for the user FRONT-END IN ADC OUT >> High-speed data transfer >> To be used with an external computer >> Expansion for All-in-one or Mainframe instruments >> Multiple units can be daisy-chained SIGNAL CONDITIONING >> Stand-alone signal conditioning >> Front-ends for existing recorders, A/D boards … >> Channel expansion for DEWETRON instruments 7 DEWETRON UNLIMITED MEASUREMENTS WITH... ... MORE CHANNELS HIGH-SPEED EXPANSION DEWE2-F7s Add one or more Frontend chassis for high-speed expansion TRION-SYNC-bus PCIe connection up to 7 meters LOW-SPEED EXPANSION 100 HZ CPAD3 modules with CAN interface QUASI-STATIC EXPANSION 12 HZ Add one or more EPAD2 modules at any time ... MORE SOFTWARE OXYGEN 8 DEWE2-F4s SHORT FORM CATALOG ... MORE INTERFACES ANALOG INPUTS DIGITAL INPUTS COUNTER VIDEO ARINC-429, MIL-STD-1553 GPS, VGPS, ABSOLUTE TIMING z y x INERTIAL DATA CAN PCM TELEMETRY FLEXRAY XCP 250 250 162,5 162,5 Rec 10 MS/s sampling rate 1 MS/s sampling rate -12,5 ] U1_1MS; - [V 75 U1_10MS; - [V ] 75 -12,5 -100 50 MB/s SYSTEM B 100 MB/s SYSTEM A 150 MB/s SYSTEM C 200 MB/s -100 305 MB/s DEWE-2600-STREAM ... MORE PERFORMANCE ... MORE INSIGHTS HIGH-SPEED CAM GIGE CAM INFRARED CAM USB CAM 9 DEWETRON TRION™ MODULES V 1000 > User exchangeable modules for signal conditioning > Simultaneous sampling for DEWE2 product series > Separate ADC on each channel Voltage (1000 V) GPS Current (shunt required) RTD FlexRay Current (with shunt inside) Absolute Time ARINC 429 IEPE (vibration) Counter Inputs MIL-STD 1553 Bridge (strain gage) CAN Analog Output Potentiometer Modular Smart Interfaces (e.g. for thermocouple) Digital I/O CHANNELS SAMPLE RATE PER CH. RESOLUTION ISOLATION CONNECTOR TYPES 4 or 8 204.8 kS/s 24 bit yes DSUB, LEMO 0B V 6 2 MS/s 1 MS/s 16 bit 24 bit yes BNC V 6 2 MS/s 1 MS/s 16 bit 24 bit yes BNC, LEMO 1B V 4 or 8 204.8 kS/s 24 bit yes Safety banana sockets V 6 250 kS/s 16 bit yes BNC, LEMO 1B 6 or 8 204.8 kS/s 24 bit - RJ-45, DSUB, LEMO 1B, LEMO 0B 6 or 8 204.8 kS/s 24 bit - SMB, BNC CHANNELS SAMPLE RATE PER CHANNEL RESOLUTION ISOLATION INPUT TYPES ANALOG MODULES V 100 TRION-2402-MULTI TRION-1620-ACC TRION-1620-LV TRION-2402-V TRION-1603-LV 100 100 1000 100 V 10 TRION-2402-dSTG V TRION-2402-dACC 100 MULTI-FUNCTION MODULES TRION-1802-dLV V 10 16 or 32 200 kS/s 100 kS/s 18 bit 24 bit - DSUB TRION-1600-dLV V 10 16 or 32 20 kS/s 16 bit - DSUB CHANNELS SAMPLE RATE PER CHANNEL RESOLUTION ISOLATION INPUT TYPES 6 to 18 800 kS/s 80 MHz yes DI, CNT TRION-DI-48 48 2 MS/s - yes DI TRION-BASE 1 to 8 2 MS/s 80 MHz - DIO, CNT, SYNC, AUX TRION-VGPS 1 GPS 100 Hz 0.01 km/h <10 cm - GPS antenna, IRIG In / Out, DIO, CNT, SYNC, AUX TRION-TIMING 1 to 8 2 MS/s 80 MHz - GPS antenna, IRIG In / Out, DIO, CNT, SYNC, AUX CHANNELS SAMPLE RATE PER CHANNEL RESOLUTION ISOLATION CONNECTOR TYPES 2 or 4 - - yes DSUB TRION-FLEXRAY 1 - - - DSUB TRION-A429 / TRION-M1553 / TRION-MA4 4 to 30 1 to 4 9 to 13 - - - SCSI-3 Update rate max. 2.8 MS/s 1 MS/s 16 bit - BNC 8 (4 U / 4 I) 2 MS/s ≥ 18 bit yes Safety banana, DSUB DIGITAL MODULES TRION-CNT DEDICATED MODULES TRION-CAN TRION-1628-AO-2 TRION-1820-POWER 10 V 1000 00101001010001 SHORT FORM CATALOG TRION™ ALL-IN-ONE > > > > Built-in display Most compact and flexible configuration Powerful PC inside for fast online displays and analysis Most convenient for mobile applications DEWE2-A4 DEWE2-A4L DEWE2-A7 / DEWE2-A13 DEWE2-A8-STREAM 4 4 7 / 13 8 Slots for TRION™ acquisition modules High-speed channel expansion Add Front-end chassis or setup network n/a Low-speed channel expansion 100 Hz CPAD3 via TRION-CAN Quasi-static channel expansion EPAD2 Data storage 256 GB removable Solid State Disk 1 TB hard disk dedicated for data storage 120 GB SSD for operating system and application software Optional data storage 500 GB SSD dedicated for data storage 120 GB SSD for operating system and application software Up to 1 TB SSD Gap free storing rate Typ. 80 MB/s Typ. 80 MB/s Display 13“ (1280 x 800) 15.4“ multi-touch wide-screen display (1280 x 800) Typ. 90 MB/s 17“ (1920 x 1080) FULL HD Typ. 180 MB/s 17“ (1920 x 1080) FULL HD Power supply Input voltage (max.) 10 to 36 VDC isolated incl. external AC power supply 90 to 264 VAC Option 1 Internal buffer battery for ~ 5 min. operation - DC power supply (DW2-PS-DC-300) 10 to 36 VDC Option 2 (DW2-UPS-250-DC) Ext. battery pack, 3 battery slots for ~2 hours operation - (DW2-PS-BAT) Battery powered, 4 battery slots for ~2 hours operation 318 x 253 x 128 mm (12.5 x 10 x 5 in.) 462 x 320 x 135 (18.2 x 12.6 x 5.3 in.) 450 x 246 x 303 mm (17.7 x 9.7 x 11.9 in.) 450 x 246 x 303 mm (17.7 x 9.7 x 11.9 in.) Typ. 5.9 kg (13 lb.) Typ. 8.5 kg (18.7 lb.) Typ. 15 kg (33 lb.) Typ. 14 kg (31 lb.) Dimensions Dimensions (W x D x H) (without handle) Weight without modules and batteries 1) Weight of one battery: 660 g (1.45 lb.) DEWE-CAM-01 Add video data to your measurements via high shock and vibration resistant camera DW2-UPS-250-DC, 250 W UPS with 3 battery slots DW2-A13-CC Shipping/carrying case 11 DEWETRON TRION™ MAINFRAMES > Most compact and flexible configuration > Powerful PC inside for fast online displays and analysis > Convinient for mobile applications Slots for TRION™ acquisition modules High-speed channel expansion DEWE2-M4 DEWE2-M4s 4 4 7 n/a Add Front-end chassis or setup network Add Front-end chassis or setup network Low-speed channel expansion 100 Hz CPAD3 via TRION-CAN Quasi-static channel expansion Data storage DEWE2-M7s EPAD2 or CPAD2 via TRION-CAN 256 GB removable Solid State Disk Optional data storage 256 GB Solid State Disk Up to 1 TB Power supply Standard (max.) 10 to 36 VDC isolated; incl. external AC power supply (DW2-PS-DC-Buffer) Internal buffer battery for ~ 5 min. operation Option 1 Option 2 (DW2-UPS-250-DC) Ext. battery pack, 2 battery slots n/a (DEWE-UPS-300-DC) Ext. battery pack, 4 battery slots 318 x 253 x 108 mm (12.5 x 10 x 4.3 in.) 177 x 230 x 177 mm (4 u) (7 x .9.1 x 7 in.) 258 x 230 x 177 mm (4 u) (10.2 x 9.1 x 7 in.) Typ. 3.9 kg (8.6 lb.) Typ. 3.9 kg (8.6 lb.) Typ. 4.9 kg (10.8 lb.) Dimensions Dimensions (W x D x H) (without handle/feet) Weight without modules and batteries1) 1) Weight of one battery: 660 g (1.45 lb.) CAM-SPLIT-BOX 12 BAT-CHARGER-1 Desktop battery charger for 1 battery BAT-CHARGER-4 Desktop battery charger for 4 batteries DE-POWERBOX-11 DC power distribution box SHORT FORM CATALOG DEWE2-M13s DEWE2-M7 / DEWE2-M13 DEWE2-M18 13 7 / 13 18 Add Front-end chassis or setup network Ethernet CPAD3 via TRION-CAN EPAD2 or CPAD2 via TRION-CAN CPAD2 via TRION-CAN 256 GB Solid State Disk 1 TB Hard Disk (plus two 3,5“ bays) 256 GB Solid State Disk Up to 1 TB Up to 4 TB Up to 1 TB 10 to 36 VDC isolated; incl. external AC power supply 90 to 264 VAC 90 to 264 VAC Internal buffer battery for ~ 2 min. operation Redundant AC power supply n/a Battery powered, 4 battery slots for ~2 hours operation n/a n/a 441 x 230 x 177 mm (4 u) (17.4 x 9.1 x 7 in.) 441 x 427 x 177 mm (4 u) (17.4 x 16.8 x 7 in.) Typ. 7.3 kg (16 lb.) Typ. 13 kg (28.6 lb.) MOB-DISP-12 External display DEWE2-M13s with 4 battery slots DEWE2-M13 with 2 hard disks (2x option DW2-M13-BAY35-SATA) 13 DEWETRON TRION™ FRONT-ENDS WITH FIBRE-OPTIC & PCIE INTERFACE > Most compact and flexible configuration > High-end A/D conversion > Data transmission via PCIe (up to 7 m) or fibre-optic Slots for TRION™ acquisition modules DEWE2-F4s DEWE2-F7s 4 7 High-speed channel expansion DEWE2-F13s DEWE2-F13-FIBRE DEWE2-F18 13 13 18 Firbre-optic (needs fibre-optic card in host) PCIe Daisy-chain another Front-end chassis Low-speed channel expansion 100 Hz CPAD3 via TRION-CAN Quasi-static channel expansion CPAD2 via TRION-CAN (no EPAD2) Interface to host PCIe Power supply Power supply standard (max.) 90 to 264 VAC Option 1 10 to 36 VDC isolated 10 to 36 VDC isolated Redundant AC power supply Redundant AC power supply Redundant AC power supply Option 2 Internal buffer battery for ~ 5 min. operation (requires DC option) Internal buffer battery for ~ 5 min. operation (requires DC option) 10 to 36 VDC isolated; Internal buffer battery for ~ 2 min. operation n/a n/a Option 3 n/a n/a Battery powered, 4 battery slots1) for ~2 hours operation n/a n/a Dimensions (W x D x H) (without feet) 177 x 230 x 177mm (4 u) (7 x 9.1 x 7 in.) 258 x 230 x 177 mm (4 u) (10.2 x 9.1 x 7 in.) 441 x 230 x 177 mm (4 u) (17.4 x 9.1 x 7 in.) 441 x 427 x 177 mm (4 u) (17.4 x 16.8 x 7 in.) 441 x 427 x 177 mm (4 u) (17.4 x 16.8 x 7 in.) Weight without modules and batteries1) Typ. 3.9 kg (8.6 lb.) Typ. 4.9 kg (10.8 lb.) Typ. 8 kg (17.6 lb.) Typ. 12 kg (26.4 lb.) Typ. 12 kg (26.4 lb.) Dimensions 1) Weight of one battery: 660 g (1.45 lb.) Link and Sync interfaces of A-series for F-series expansion 14 DEWE-DCDC-24-400-ISO External DC/DC converter DEWE2-F13s with redundant 90 to 264 VAC power supply (option DW2-PS-AC-RED) SHORT FORM CATALOG DISTRIBUTED SYSTEMS OVER LARGE DISTANCE Example: DEWE2-M13 expanded with DEWE2-F13-FIBRE via fibre-cable for long distance 100 m Fibre link for data transfer IRIG-SYNC DEWE2-M13 with TRION-TIMING module DEWE2-F13-FIBRE with TRION-TIMING module NETWORK WITH MULTIPLE SYSTEMS WiFi DEWE2-A4 with TRION-BASE module DEWE2-M7s with TRION-BASE module Sync up to 1000 meters (IRIG DC, cable length delay compensation) GPS-SYNC DEWE2-A4 with TRION-VGPS or TRION-TIMING module DEWE2-M7s with TRION-VGPS or TRION-TIMING module GPS Two or more instruments synchronized via GPS 15 DEWETRON TRION™ FRONT-ENDS WITH USB & ETHERNET INTERFACE > > > > Gigabit LAN and USB3 Distributable / stackable Up to 100 m distance between the TRIONet systems Touch display TRIONet Slots for TRION™ modules 2 1) Quasi-static channel expansion CPAD via TRION-CAN or TRION-MULTI (no EPAD) LAN 2 x 10/100/1000BASE-TX Gigabit Ethernet LAN configuration DHCP or Static IP USB USB 2.0; USB 3.0 Synchronization TRION-SYNC-Bus up to 100 m between nodes System bandwidth 90 MB/s with one connected TRIONet (up to 50 MB/s with more than one) Display Status display with touch-screen Cooling 2 temperature controlled ultra silent fans Host system requirements Supported operating systems Windows 7; Windows 10 Supported interfaces USB 3.0; USB 2.0; 10/100/1000BASE-TX Gigabit Ethernet Power requirements Isolated power supply (max) 10 to 32 VDC (9 to 36 VDC) Power consumption Without modules 15 W, totally equipped max. 55 W External power supply (included) 100 to 240 V ~50 to 60 Hz / 65 W Dimensions Dimensions (W x D x H) 320 x 205 x 55 mm (12.6 x 8 x 2.2 in.) Weight Typ. 1.9 kg (4.2 lb.) without modules Environmental specifications Operating temperature -20 °C to +60 °C (with pre-warmed unit) Storage temperature -20 to +70 °C Humidity 10 to 90 % non cond., 5 to 95 % rel. humidity Max. altitude 3000 m (9840 ft) Sine vibration (EN 60068-2-6) 20 m/s² Shock (EN 60028-2-27) 30 g Random vibration (EN 60721-3-2) Class 2M3 1) unsupported modules: TRION-FLEXRAY; TRION-A429; TRION-M1553; TRION-MA4; TRION-1628-AO-2 LOW CHANNEL COUNT APPLICATION LAN or USB 16 DISTRIBUTED INSTALLATION LAN or USB LAN & Sync 100 m SHORT FORM CATALOG ORION A/D BOARDS > Simultaneous sampling with separate A/D converter per channel > Clock output for synchronizing external devices, e.g. cameras > Synchronized analog, digital, counter and CAN inputs ANALOG INPUT CHANNELS INPUT RANGES RESOLUTION MAX. SAMPLING RATE / CHANNEL TYPE OF ADC DIGITAL INPUT CHANNELS DIGITAL I/O COUNTER / ENCODER CAN DEWE-ORION-0824-20x series 8 Voltage: ±0.1 V, ±0.5 V, ±2 V, ±10 V IEPE®: 4 mA / 8 mA excitation 24 bit 204.8 kS/s delta-sigma with antialising filter up to 40 8 up to 10 (advanced) up to 2 DEWE-ORION-0816-100x series 8 Voltage: ±1.25 V, ±2.5 V, ±5 V, ±10 V 16 bit 1 MS/s up to 40 8 up to 10 up to 2 DEWE-ORION-0816-5Mx series 8 Voltage: ±5 V 16 bit 5 MS/s up to 8 8 2 (advanced) up to 2 DEWE-ORION-0816-10Mx series 8 Voltage: ±5 V 16 bit 10 MS/s up to 8 8 2 (advanced) up to 2 DEWE-ORION-1624-20x series 16 Voltage: ±10 V 24 bit 204.8 kS/s up to 40 8 up to 10 (advanced) up to 2 DEWE-ORION-1616-10x series 16 Voltage: ±1.25 V, ±2.5 V, ±5 V, ±10 V 16 bit 100 kS/s up to 40 8 up to 10 up to 2 DEWE-ORION-1616-100x series 16 Voltage: ±1.25 V, ±2.5 V, ±5 V, ±10 V 16 bit 1 MS/s up to 40 8 up to 10 up to 2 DEWE-ORION-3216-10x series 32 Voltage: ±1.25 V, ±2.5 V, ±5 V, ±10 V 16 bit 100 kS/s up to 24 8 2 up to 2 ORION MODEL successive approximation (SAR) successive approximation (SAR) successive approximation (SAR) delta-sigma with antialising filter successive approximation (SAR) successive approximation (SAR) successive approximation (SAR) DEWE INSTRUMENTS WITH ORION A/D BOARDS + DAQ MODULES SIGNAL CONDITIONING MODULES ANALOG SIGNAL CONDITIONING ANALOG DAQ MODULES HOUSING AND STORAGE AND A/D CARDS A/D conversion Counter CAN bus DEWE-ORION A/D CARDS > Isolated or differential analog inputs > A/D resolution 16 or 24 bit > Separated A/D card for flexible sampling rates up to 10 MS/s WIDE RANGE OF HOUSINGS 17 DEWETRON DYNAMIC AMPLIFIERS > > > > Isolated dynamic single channel modules Isolation up to 1.8 kVRMS Bandwidth up to 300 kHz Configuration via RS-485 interface MODULE Universal measurement DAQP-STG V MSI MSI V INPUT TYPE Voltage Bridge Capacity Current Inductive sensors Frequency IEPE Potentiometer Charge Thermocouple RANGES Strain gauge, bridge sensors ±0.1 to ±1000 mV/V (@ 5 VDCexc) Piezoresistive bridge ±0.5 to 10000 mV/mA (@ 1 mAexc) Voltage ±500 µV to ±10 V Resistance 25 mΩ to 100 kΩ Pt100, Pt200, Pt500, Pt1000, -200° C to 850° C Pt2000 MSI DAQP-MULTI V High voltage measurement DAQP-HV IEPE® via MSI-BR-ACC ±100 to ±10000 mV Thermocouple via MSI-BR-TH-x full range of TC type Charge via MSI-BR-CH-50 up to 50000 pC Voltage via MSI-BR-V-200 up to ±200 V Thermoresistor Pt100, Pt200, Pt500, Pt1000 and Pt2000, free programmable range Thermocouple Type K, J, T, R, S, N, E, B, L, C, U free programmable range Resistance 1 Ohm to 1 MOhm Piezoresistive bridge Voltage Current (with external shunt) 13 ranges (±0.5 to 5000 mV/mA) 10 ranges from ±5 mV to ±5 V depending on external shunt High voltage ±20 to ±1400 V V TEDS OUT Current output BANDWIDTH (BW), FILTERS (LP = LOWPASS, HP = HIGHPASS) ISOLATION (ISO), OVERVOLTAGE PROTECTION (OP) BW: 300 kHz LP: 10 Hz to 300 kHz ISO: 350 VDC OP: ±50 VDC BW: 3 kHz LP: 3, 10, 30, 100, 300, 1000 Hz ISO: 1 kVRMS - BW: 300 kHz LP: 10 Hz to 300 kHz ISO: 1.8 kVRMS BW: 300 kHz LP: 10 Hz to 300 kHz ISO: up to 1 kVRMS OP: 350 VDC - - Voltage & current measurement DAQP-LV Voltage V MSI MSI MSI ±10 mV to ±50 V Current (with external shunt) 20 mA / 5 A IEPE® via MSI-V-ACC ±10 mV to 10 V Pt100, Pt200, Pt500, Pt1000, -200° C to 1000° C and Pt2000 and resistance via 0 to 6.5 kOhm MSI-V-RTD Charge via MSI-V-CH-50 up to 50000 pC Voltage ±10 V (1:1 input) DAQN-AIN V 18 OP: < ±500 V (jumper selectable) SHORT FORM CATALOG MODULE INPUT TYPE RANGES TEDS - BANDWIDTH (BW), FILTERS (LP = LOWPASS, HP = HIGHPASS) ISOLATION (ISO), OVERVOLTAGE PROTECTION (OP) Current measurement DAQP-LA-SC DAQP-LA-B Current 0.1 A to 30 APEAK Note: 5 ARMS continuous max. 5 ARMS contin. current Current 2 mA to 600 mA BW: 300 kHz ISO: 1.4 kVRMS LP: 10 Hz to 300 kHz - Note: typ. 20 mA application BW: 300 kHz ISO: 1.4 kVRMS LP: 10 Hz to 300 kHz Carrier frequency amplifier DAQP-CFB2 AC bridge, strain gauge Bridge: 0.1 to 1000 mV/V - Note: programable sine wave excitation up to 20 kHz BW: DC to 9.6 kHz OP: ±10 VDC LP: 10 Hz to 1 kHz Inductive sensors, LVDT capacity Inductive: 5 to 1000 mV/V Capacity 20 pF to 1 µF IEPE® sensors ±50 mV to ±5 V Charge / IEPE® measurement DAQP-ACC-A - BW: 0.5 Hz to 300 kHz - LP: 1 to 300 kHz HP: 0.5 Hz and 5 Hz DAQP-CHARGE-A Charge sensors Charge: 5 to 50000 pC IEPE® sensors IEPE®: ±5 mV to 5 V - Charge sensors - LP: 100 Hz to 50 kHz HP: 0.1 Hz to 10 Hz Note: selectable integration and double integration DAQP-CHARGE-B BW: 0.1 Hz to 50 kHz ±100 to ±1 000 000 pC - BW: DC to 100 kHz ISO: 350 VDC LP: 10 Hz to 100 kHz Note: selectable time constant for static sensors HP: DC, 0.001 Hz to 0.5 Hz Temperature measurement DAQP-THERM Thermocouple Type K, J, T, R, S, N, E, B, L, C and U selectable Note: internal CJC and linearisation free programmable range Frequency 100 Hz to 200 kHz BW: 3 kHz LP: 3, 10, 30, 100, 300, 1000 Hz ISO: 1 kVRMS Frequency measurement DAQP-FREQ-A - BW: according to range ISO: 350 VDC Output response: 1.5 ms 30 ms 500 ms Voltage output module DAQN-V-OUT Voltage output 1:1 output module with isolation - BW: 400 Hz ISO: 240 VDC Input voltage: ±10 V Output voltage: ±10 V OUT 19 DEWETRON HIGH-SPEED AMPLIFIERS > > > > Isolated single channel module High bandwidth up to 2 MHz Selectable filters and multiple ranges Analog signal output (±5 V) MODULE Universal measurement HSI-STG V MSI MSI INPUT TYPE RANGES Strain gauge, bridge sensors ±0.1 to ±1000 mV/V (@ 5 VDCexc) Piezoresistive bridge ±0.5 to 10000 mV/mA (@ 1 mAexc) Voltage ±500 µV to ±10 V Resistance 25 mΩ to 100 kΩ Pt100, Pt200, Pt500, Pt1000, -200° C to 850° C Pt2000 MSI IEPE® via MSI-BR-ACC ±100 to ±10000 mV Thermocouple via MSI-BR-TH-x Full range of TC type Charge via MSI-BR-CH-50 Up to 50000 pC Voltage via MSI-BR-V-200 Up to ±200 V High voltage ±20 to ±1400 V Voltage ±10 mV to ±50 V BANDWIDTH (BW), TEDS FILTERS (LP = LOWPASS, HP = HIGHPASS) ISOLATION (ISO), OVERVOLTAGE PROTECTION (OP) BW: up to 2 MHz LP: 100 Hz to 2 MHz HP: 1 Hz ISO: 350 VDC OP: ±50 VDC - BW: 2 MHz LP: 100 Hz to 2 MHz ISO: 1.8 kVRMS BW: 2 MHz LP: 100 Hz to 2 MHz ISO: up to 1 kVRMS OP: 350 VDC High voltage measurement HSI-HV V Voltage & current measurement HSI-LV V MSI 20 MSI Current with external shunt 20 mA / 5 A IEPE® via MSI-V-ACC ±10 mV to 5 V Pt100, Pt200, Pt500, Pt1000, -200° C to 1000° C and Pt2000 and resistance via 8 to 4 kΩ MSI-V-RTD SHORT FORM CATALOG MSI ADAPTER > > > > Modular Smart Interfaces Expand functionality of bridge and voltage inputs Automatically detected Versions for voltage, thermocouple, RTD, IEPE® and charge sensors MODULAR SMART INTERFACES FOR HSI, DAQP AND MDAQ MODULES MSI-BR-ACC MDAQ-SUB-STG-D MDAQ-SUB-V-200-D DAQP-STG-D DAQP-LV-D HSI-LV � - � - - Isotron (constant current powered) adapter for MDAQ-SUB-BRIDGE / -STG modules with DB9 connector Excitation current 4 mA at 21 V, High pass filter 1.5 Hz, BNC connector Bandwidth and ranges are defined by connected amplifier Automatic adapter identification MSI-BR-V-200 � - � - - 200 V input adapter for MDAQ-SUB-BRIDGE / -STG modules with DB9 connector Differential input configuration, BNC connector Bandwidth and ranges are defined by connected amplifier Automatic adapter identification MSI-BR-RTD � - not needed - - Pt100, Pt200, Pt500, Pt1000 and Pt2000 adapter for MDAQ-SUB-BRIDGE / -STG modules with DB9 connector 2, 3 and 4 wire connection methods, 5-pin Binder 712 series connector Automatic adapter identification MSI-BR-CH-x � - � - - Charge input interface for DAQP-STG and MDAQ-SUB-BRIDGE / -STG with DB9 connector Range up to 50000 pC, AC coupled with 0.07 Hz, BNC signal connection Max. 100 kHz bandwidth (dependent on the max. bandwidth of the amplifier) Automatic adapter identification MSI-BR-TH-x � - � isolated TC sensor - - any TC sensor Thermocouple type K / J / T adapter for DAQP-BRIDGE-x and MDAQ-SUB-BRIDGE / -STG modules with DB9 connector For use with isolated thermocouple sensors only! High accuracy cold junction reference measurement, 1 m thermo cable with Mini TC connector Automatic adapter identification MSI-V-ACC - � - � � Isotron (constant current powered) adapter for DAQP-LV and MDAQ-SUB-V-200 modules with DB9 connector Excitation current 4 mA at 21 V, High pass filter 1.5 Hz, BNC connector Bandwidth and ranges are defined by connected amplifier Automatic adapter identification MSI-V-RTD - � - � � Pt100, Pt200, Pt500 and Pt1000 adapter for DAQP-LV and MDAQ-SUB-V-200 modules with DB9 connector 2, 3 and 4 wire connection methods, 5-pin Binder 712 series connector Automatic adapter identification 21 DEWETRON ORION ALL-IN-ONE >> Built-in display >> Powerful PC inside for fast online data view and analysis >> Convenient for mobile applications DEWE-2600 DEWE-5000 DEWE-3300 DAQ / PAD amplifier slots 16 16 16 Total PCI slots 7 5 2 4 5 1 Available with DAQ / PAD slots High-speed channel expansion DEWE-50-PCI Front-end or DEWE-30 Low-speed channel expansion 100 Hz CPAD3, requires CAN interface in base unit Quasi-static channel expansion EPAD2 Data storage Optional data storage Display 1 TB hard disk 120 SSD, 1 TB Daten Up to 4 TB HDD / Up to 1 TB SSD 15“ (1280 x 800) 17“ (1920 x 1080) Up to 1 TB SSD FULL HD 15.6“ multitouch-screen (1920 x 1080) FULL HD Power supply Standard rated (max.) Option 90 to 264 VAC 90 to 264 VAC Battery powered, 3 battery slots for ~2 hours operation 90 to 264 VAC 9 to 30 VDC incl. external AC power supply Dimensions Dimensions (W x D x H) Weight without batteries1) 417 x 246 x 303 mm (16.4 x 9.6 x 11.9 in.) 460 x 351 x 192 mm (18.1 x 13.8 x 7.7 in.) 462 x 320 x 135 mm (18.2 x 12.6 x 5.3 in.) Typ. 14 kg (31 lb.) Typ. 17 kg (37.4 lb.) Typ. 8.2 kg (18 lb.) 1) Weight of one battery: 660 g (1.45 lb.) 2600-CC DEWE-2600 shipping and carrying case 22 DEWE-5000 with batteries (5000-PS-BAT) 2600-CSMK1 Car seat mounting kit for DEWE-2600 SHORT FORM CATALOG ORION MAINFRAME > Portable and rack-mount versions > Powerful PC inside for fast online data view and analysis > Many power supply options DEWE-800 DAQ / PAD amplifier slots 16 Total PCI slots 5 Available with DAQ / PAD slots High-speed channel expansion Low-speed channel expansion 100 Hz Quasi-static channel expansion 5 DEWE-50-PCI Front-end or DEWE-30 CPAD3, requires CAN interface in base unit EPAD interface with up to 16 EPAD2 modules = 128 ch Data storage 1 TB hard disk Optional data storage Up to 4 TB hard disk / Up to 1 TB SSD Power supply Standard (max.) 90 to 264 VAC Option 9 to 18 VDC or 18 to 36 VDC Dimensions 437 x 443 x 181 mm (4u) (17.2 x 17.4 x 7.1 in.) Dimensions (W x D x H) Weight without batteries1) Typ. 12 kg (26.4 lb.) 1) Weight of one battery: 660 g (1.45 lb.) 800-MK DEWE-800 with 19” mounting kit POWERBOX-11 Power distribution for automotive applications DEWE-DCDC-24-400-ISO 10 to 36 VDC power supply 24 VDC (400 W) 23 DEWETRON ORION FRONT-ENDS WITH PCIE INTERFACE > High-speed PCIe connection to your computer or laptop > Up to 128 ch per chassis > Cascading option for creating high channel count systems Slots for DAQ or PAD modules DEWE-50-PCI-32 DEWE-50-PCI-64 32 64 External quasi-static channel expansion EPAD interface, up to 16 EPAD2 modules = 128 ch Digital I/O, counter, CAN bus Depending on selected ORION board(s) Main system Internal PCI slots 3 Host PC interface ExpressCard-54, optional PCI, PCI-Express or ExpressCard-34 7 Supported operating systems Power supply (max.) Dimensions (W x D x H) Weight Microsoft® WINDOWS® 7/10 95 to 260 VAC 95 to 260 VAC 435 x 300 x 223 mm (17.1 x 11.8 x 8.8 in.) 435 x 300 x 444 mm (17.1 x 11.8 x 17.5 in.) Typ. 10 kg (22 Ibs) Typ. 15 kg (33 Ibs) Environmental specifications Operating temperature Storage temperature 0 to +50 °C -20 to +70 °C Humidity 10 to 90 % non cond., 5 to 95 % rel. humidity Vibration EN 60068-2-6, EN 60721-3-2 Class 2M2 Shock EN 60068-2-27 The use of multiple DEWE-50-PCI on a single PC is supported; ending up in a very ﬂexible multi-channel system 24 SHORT FORM CATALOG ORION FRONT-ENDS WITH USB & ETHERNET INTERFACE > Easy USB or Ethernet connection to your computer > Sync option for channel expansion (some models) > Various power supply options Slots for DAQ or PAD modules External quasi-static channel expansion DEWE-50-USB2-8 DEWE-50-USB2-16 DEWE-50-NET-16 8 16 16 EPAD interface, up to 8 EPAD2 modules = 64 ch EPAD interface, up to 16 EPAD2 modules = 128 ch A/D conversion Sampling method Resolution Sampling rate Simultanous sampling Multiplexed sampling Multiplexed sampling 24 bit 16 bit 16 bit 204.8 kS/s 500 kS/s aggregate 31.25 kS/s per channel 500 kS/s aggregate 2 counters or 6 digital inputs Optional 5 isolated counters / 16 TTL level DI 2 - - 9 to 36 VDC 85 to 264 VAC 85 to 264 VAC Counter and digital inputs Counters / digital inputs CAN bus High-speed CAN bus interfaces Power supply Standard (max.) Main system Host PC interface Supported operating systems Dimensions (W x D x H) Weight USB 2 USB 2 100 Mbit Ethernet Microsoft® WINDOWS® 7/10 Microsoft® WINDOWS® 7/10 Microsoft® WINDOWS® 7/10 230 x 181 x 104 mm (9.1 x 7.1 x 4.1 in.) 435 x 245x 133 mm (3 u) (17.1 x 9.6 x 5.2 in.) 435 x 245 x 133 mm (3 u) (17.1 x 9.6 x 5.2 in.) Typ. 3 kg (6.6 lbs) Typ. 5.5 kg (12 Ibs) Typ. 5.5 kg (12 Ibs) Environmental specifications Operating temperature 0 to +50 °C Storage temperature -20 to +70 °C Humidity 10 to 90 % non cond., 5 to 95 % rel. humidity Vibration EN 60068-2-6, EN 60721-3-2 class 2M2 Shock EN 60068-2-27 50-HANDLE Carrying handle 50-16-DC Option for DC power supply USB interface with hot plug-and-play capabilities 50-16-OUT-5/-10 16 BNCs on the rear for conditioned signal output 50-16-MK 19“ rack mount kit 25 DEWETRON CPAD3 MODULES FOR SLOW MEASUREMENTS > > > > 100 Hz sampling rate High isolation 1500 V ADC per channel CAN interface MODULE INPUT TYPE INPUT RANGES ISOLATION SPECIAL Dedicated modules for type J, K, T Universal module for types K, J, T, E, R, S, B, N, C, U According thermocouple type 1500 VDC (channel to channel and channel to BUS, power and chassis) Overvoltage protection: 15 VDC 8 isolated voltage input channels Physical input range: ±50 V Software selectable: ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V 1500 VDC (channel to channel and channel to BUS, power and chassis) Overvoltage protection: 350 VDC CPAD3-TH8-x CPAD3-V8 CPAD3-TH8-X > > > > Intelligent amplifier with integrated A/D conversion CAN interface 8 input channels for thermocouples Available thermocouple types: > CPAD3-TH8-x: K, J, T standard type > CPAD3-TH8-UNIVERSAL: K, J, T, E, R, S, B, N, C, U CPAD3-V8 > Intelligent amplifier with integrated A/D conversion > CAN interface > 8 isolated voltage input channels CPAD3-V8-B > CAN interface > 8 isolated voltage input channels 26 SHORT FORM CATALOG EPAD2 / CPAD2 >> Extremely rugged and flexible mounting >> 24 bit A/D converter per channel, 12 Hz sampling rate >> Channel to channel/system isolation >> EPAD: RS-485 interface / CPAD: CAN interface >> Stackable and lockable MODULE INPUT TYPE INPUT RANGES ISOLATION SPECIAL Dedicated modules for type J, K, T Universal module for types K, J, T, E, R, S, B, N, C, U According thermocouple type 350 VDC (channel to channel and channel to BUS, power and chassis) Overvoltage protection: 15 VDC 8 isolated voltage input channels Physical input range: ±50 V Software selectable: ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V 350 VDC (channel to channel and channel to BUS, power and chassis) Overvoltage protection: 350 VDC 8 isolated Resistance Temperature Detector channels Resistor: 0 to 999.99 Ω RTD: PT100(385), PT200 (385), PT500(385), PT1000 (385), PT2000(385), PT100 (3961) 350 VDC (channel to channel and channel to BUS, power and chassis) Overvoltage protection: 15 VDC 8 isolated current inputs 0 to 20 mA, ±20 mA, ±30 mA 350 VDC (channel to channel and channel to BUS, power and chassis) Overcurrent protection: 70 mA cont. USB-interface module for EPAD2 n/a - - OUTPUT TYPE OUTPUT RANGES ISOLATION SPECIAL 4 voltage or current output channels ±10 V; ±5 V; 0 to 5 V; 0 to 10 V; 0 to 20 mA; 4 to 20 mA 350 VDC (channel to BUS, power and chassis) - EPAD2/CPAD2-TH8-x EPAD2/CPAD2-V8 EPAD2/CPAD2-RTD8 EPAD2/CPAD2-LA8 EPAD2-USB MODULE EPAD2-AO4 * CPAD = CAN-bus interface * EPAD = RS-485 interface 27 DEWETRON CVT LOGGER > > > > USB data logger for current, voltage and temperature inputs Touch operation and easy to use software 8 channels (expandable to 128 channels) 24 bit, up to 10 Hz PACKAGES Each package contains: CVT Logger software, interface module, and power supply (24 V). EPAD modules of your choice must be selected (bricks of 8 channels). Depending on application, CVT Logger is delivered stacked, or separated for distributed measurements. For distributed systems cable length between the modules can be selected (2 m, 5 m, 10 m). EPAD MODULES MODULE INPUT TYPE INPUT RANGES ISOLATION Universal module for types K, J, T, E, R, S, B, N, C, U According thermocouple type 350 VDC (channel to channel and channel to BUS, power and chassis) 8 isolated Resistance Temperature Detector channels Resistor: 0 to 999.99 Ω RTD: PT100(385), PT200 (385), PT500(385), PT1000 (385), PT2000(385), PT100 (3961) 350 VDC (channel to channel and channel to BUS, power and chassis) 8 isolated current inputs 0 to 20 mA, ±20 mA, ±30 mA 0 to 20 mA, ±20 mA, ±30 mA 8 isolated voltage input channels Physical input range: ±50 V Software selectable: ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V 350 VDC (channel to channel and channel to BUS, power and chassis) EPAD2-TH8-x EPAD2-RTD8 EPAD2-LA8 EPAD2-V8 28 SHORT FORM CATALOG POWER ANALYZER > Modular high precision Mixed Signal Power Analyzer > Poly-phase power analysis up to 7 phases > Online calculation of several power groups > Up to 10 MS/s/ch simultaneous acquisition > Gapless data acquisition Slots for TRION™ acquisition modules High-speed channel expansion DEWE2-PA7 DEWE2-A4L-PA 7 4 Add one or more TRIONet CPAD3 via TRION-CAN EPAD2 CPAD via TRION-CAN or TRION-MULTI (no EPAD) 1 TB hard disk dedicated for data storage 120 GB SSD for operating system and OXYGEN Measurement Software - Up to 1 TB SSD - Quasi-static channel expansion Optional data storage Gap-free storing rate Display 2 Add Front-end chassis or setup network Low-speed channel expansion 100 Hz Data storage TRIONet-PA Typ. 80 MB/s 9’’ multi-touch wide screen (1280 x 800) 15.4’’ multi-touch wide screen (1280 x 800) - Power supply Input voltage (max.) 90 to 264 VAC 10 to 32 VDC (9 to 36 VDC) Dimensions Dimensions (W x D x H) (without feet/handle) Weight without modules and batteries1) 1) 441 x 427 x 177 mm (4 u plus 1 u for cooling in cabinet required) (17.4 x 16.8 x 7 in.) 462 x 320 x 135 mm (18.2 x 12.6 x 5.3 in.) 320 x 205 x55 mm (12.6 x 8 x 2.2 in.) Typ. 13kg (28.6 lb.) Typ. 8.5 kg (18.7 lb.) Typ. 1.9 kg (4.2 lb.) Weight of one battery: 660 g (1.45 lb.) MOTOR INVERTER ROTATION SPEED HARMONIC LOAD FLICKER EFFICIENCY HARMONIC EMISSION LOAD TEMPERATURE TORQUE ACTIVE POWER POWER FACTOR 29 DEWETRON POWER QUALITY ANALYZER > Modular and dedicated multi channel Power Quality Analyzer > Up to 64 synchronous channels > All-in-one and rack mounted versions DAQ / PAD amplifier slots DEWE-3300-PQA DEWE-800-PQA DEWE-571-PQA-4U12I 16 16 - Fixed amplifiers - - 4 x U, 12 x I Total PCI slots 2 5 1 Available with DAQ / PAD slots 1 5 n/a High-speed channel expansion Low speed channel expansion 100 Hz DEWE-50-PCI Front-end or DEWE-30 CPAD3, requires CAN interface in base unit Quasi-static channel expansion Data storage Optional data storage Display n/a n/a EPAD2 120 GB, 1 TB HDD 1 TB hard disk 256 GB Solid State Disk Up to 1 TB SSD 4 TB HDD / 1 TB SSD Up to 1 TB SSD 15.5’’ multi-touch screen (1920 x 1080) FULL HD n/a 12.1” TFT touchscreen 95 to 260 VAC 95 to 260 VAC Battery powered, 2 battery slots, 2 batteries for ~2 hours operation incl., incl. external AC power supply 8 to 30 VDC incl. external AC power supply 9 to 18 VDC or 18 to 36 VDC n/a 462 x 320 x 135 mm (18.2 x 12.6 x 5.3 in.) 437 x 443 x 181 mm (4 u) (17.2 x 17.4 x7.1 in.) 360 x 300 x 150 mm (14.2 x 11.8 x 5.9 in.) Typ. 8.2 kg (18 lb.) Typ 12 kg (26.4 lb.) Typ. 5 kg (11 lb.) Power supply Power supply standard rated max. Power supply option Dimensions Dimensions (W x D x H) Weight without batteries 1) Weight of one battery: 660 g (1.45 lb.) 30 SHORT FORM CATALOG PNA SOFTWARE FOR POWER QUALITY ANALYSIS The PNA data acquisition software is designed for applications in the lower-, middle and high voltage grids, for storing RMS values, power quality parameters according to standards and recording transients. The reporting tool PNA Post is a handy tool for analyzing, displaying, comparing, exporting and reporting stored data. Data can be analyzed in time domain, frequency domain, statistical analysis and special reporting according to international standards. PNA-SW-COMPLETE PNA-SW-POWER-2 PNA-SW-ALARM This software package includes all PNA software options (FFT, POWER, …) Enhanced power: Shows the symmetrical components, in value and times-graph and the loop impedance of the grid Alarm module: Module for setting up alarms on a PNA data network PNA-SW-FFT FFT analysis: Analysis up to 50th harmonic, detection of the direction, Interhamonics, Scope, Vectorscope PNA-SW-POWER Power monitor: Visualization of all relevant data for power as value and graph, min. / max., 10 ms half period min / max with timestamps PNA-SW-DIST Disturbance fault recorder module PNA-SW-EN50160 Analysis of EN 50160 and flicker meter, statistical evaluation, spectral analysis, event monitor, CBEMA-(ITIC) curve PNA-SW-TRANS Transient recorder: Trigger on U / I / P / cos Phi / harmonics etc. PNA-SW-TEL PNA-SW-REC Data recorder: 8x U/I/temperature etc. (without hardware, PNA-PAD-BOX or PAD modules required) PNA-SW-NET Data network connection of the PNA system, allows remote control, remote postprocessing, data download with modem and LAN Module for detection and analysis of telegrams 31 DEWETRON OXYGEN DATA ACQUISITION & ANALYSIS SOFTWARE Measure, store, view and analyze your measurement data with maximum efficiency. The 64-bit technology and unique multi-touch user interface will inspire you. EFFICIENCY & PERFORMANCE MULTI-TOUCH & MOUSE ANALYZE WHILE RECORDING > Easy-to-use and intuitive > Efficient workflow that minimizes the time between set-up and reporting > High performance through 64-bit technology Get the best of two worlds: Efficient setup using the mouse and keyboard in the office or pure multi-touch operation in the field. DejaView allows you to view and analyze all data from the start of the test, while data is still being recorded – an especially useful feature for long term testing. Live View: Live data is still visible at the same time on a different recorder, on the same or on a different screen. Live View DejaView MULTIPLE MEASUREMENT SCREENS DejaView Organize your instruments on multiple screens for a good overview and immediate analysis. Live View Look back in time and analyze with DejaView while data is still recorded and displayed in Live View 32 SHORT FORM CATALOG LOGGING & RECORDING Freely define your measurement screen(s), up to hundreds of channels. Keep track on all your data by using multiple measuring screens. Use trigger functions to immediately capture any anomaly in the data. Record any input over a long time: > Voltage, current > Temperature > Pressure > Acceleration > Strain gauge > And many more VIEWING & ANALYZING Multiple precision measurement systems and analysis functions increase the value of your measurements: > > > > > Scope FFT Statistic functions Logic-, trigonometric functions E-Power calculation (efficiency measurement) > XY chart > And many more ADVANCED APPLICATIONS Use GPS/IRIG to synchronize your distributed measurement systems (e.g. in two different trains). > > > > > > IRIG/GPS DI/DO Counter Video (USB and GigE) CAN And many more INDIVIDUAL REPORTING There are plenty of options how to easily create your test reports. Stay within OXYGEN to print reports directly. Use your common office software tools (e.g. Excel) or export to common 3rd party analysis software, like MATLAB. Popular analysis platforms, like FlexPro and FAMOS, open OXYGEN files directly. 33 DEWETRON POWER ANALYSIS WITH OXYGEN POWER CALCULATION FEATURE OF SOFTWARE OXYGEN OXYGEN with Power option seamlessly integrates data being transmitted through multiple, totally synchronized signals into calculations for power analysis. MULTI POWER ANALYZER OXYGEN with Power option turns your DEWETRON system into a MIXED SIGNAL POWER ANALYZER for the simultaneous calculation of several power groups with up to 7 phases. Power instruments can be easily arranged using drag & drop predefined schematics and state-of-the-art multi-touch technology. All important values for your analysis are clearly displayed and in the right form. HARMONIC ANALYSIS Harmonic analysis at its best! We include all relevant harmonic/interharmonic and higher frequency parts in one chart. OXYGEN with Power option makes it easy to keep the focus on what you are interested in. The simultaneous display of voltage and current makes it easy to analyze the behavior of electrical motors, drives and other electrical components. TESTBED INTEGRATION OXYGEN’s smart interface technology makes it easy to integrate a MIXED SIGNAL POWER ANALYZER into automation systems and test bed environments. Smart interface technology guarantees reliable data transmission, easy to use remote control/configuration by using TCP/IP based protocols in compliance with standardized (e.g. ASAM) protocols and file formats. 34 FEATURES OF POWER ANALYSIS SOFTWARE > Simple power group creation > Predefined schematics for 1 to 7 phase power groups > Several power groups with different frequencies and variable sync sources > Dedicated power instrument with overview table, vector scope and harmonics > Calculation of flicker and flicker emission > Total and fundamental values of voltage, current and power > Fundamental frequency support from 0.2 Hz to 1500 Hz or DC > Gapless calculation > Update rate down to 10 ms SHORT FORM CATALOG LABVIEW™ LIBRARY FOR GRAPHICAL PROGRAMMING LabVIEW™ is a visual programming platform that allows engineers and scientists the flexibility to build programs specific to unique data acquisition requirements and measurement systems. It offers unprecedented integration with existing legacy software, IP, and hardware while capitalizing on the latest computing technologies. LabVIEW™ provides tools to resolve the challenges of today and tomorrow. LabVIEW™ software is ideal for any measurement or control system. Integrating all the tools that engineers and scientists need to build a wide range of applications in dramatically less time, LabVIEW™ is a development environment for problem solving, accelerated productivity, and continuous innovation. Through the DEWETRON website, we offer a comprehensive LabVIEW™ driver library that supports all DEWETRON systems and components, . LINUX SUPPORT DEWETRON TRION™ modules can run in a Linux environment (CentOS, Ubuntu and compatible distributions). Like all LabVIEW™ code, the DEWETRON LabVIEW™ libraries are platform independent and can be used with Linux as well. SAMPLE VIRTUAL INSTRUMENTS To expedite the development process you use the ready-to-use functions and example programs. DEWETRON instruments Signal conditioning modules DEWE-ORION multifunction A/D boards TRION™ PXI measurement modules LOW LEVEL VIRTUAL INSTRUMENTS Using low level VIs you can create your own project from scratch. Use VIs to access every single feature of the multifunction ADC board, including. but not limited to sample rate, input ranges, AI channels, digital I/O, counter, onboard RS-485 interface, and CAN bus interface. DEWETRON CONNECTOR The DEWETRON Connector is an abstraction layer for the DEWETRON hardware. Use the ready to use GUI for configuring all DEWETRON inputs and skip programming at the board level. Programming on the Connector level is as easy as calling functions like init, start, read, stop and quit. This saves valuable development time and minimizes the risk of programming errors. 35 DEWETRON DASYLAB DRIVERS FOR SIGNAL CONDITIONING MODULES AND ORION-BASED INSTRUMENTS DEWETRON offers a complete measurement solution with DASYLab. Drivers for DAQP and PAD amplifier series are supported as well as the ORION A/D board driver with 16-bit . Simultaneously sampled analog inputs, synchronous digital inputs and counters, and sampling rates up to 5 MHz ensure performance, stability and reliability without additional software. DEWETRON drivers and DASYLab run on Windows 7 and Windows 10 with 32 and 64-bit. >> ORION-1616-100 /-500 >> ORION-3216-100 >> ORION-0816-1000 / -5M >> ORION-1616-1000 >> DAQP series modules >> PAD/EPAD modules AD INPUT The DASYLab driver supports the whole ORION A/D boards with 16-bit. Also multiple AD cards can be combined to extend channels. The smart driver architecture does automatic hardware synchronization of multiple cards. CLOCK, TRIGGER AND CLOCKOUT The ORION cards also support an external clock and trigger, which synchronizes to other clock sources, or to rotary encoders to transform from time domain to order domain. Two free programmable clockout channels, can be used to sync with other devices. 36 DIGITAL AND COUNTER INPUTS The ORION A/D board series with 16-bit also support synchronous digital and counter inputs. Digital and counter inputs are read with the selected sampling rate. Compared to other AD cards where this is read asynchronous, this feature enables that fast digital channels can be measured with the full sampling rate. The outstanding digital input filter of the ORION counters will support measurements at harsh electrical environments. >> Basic event counting >> Gated event counting >> Up down counting >> Basic encoder SHORT FORM CATALOG DEWETRON OEM SOFTWARE DEVELOPMENT KIT If your prefer to write your own program code in C, C++, C#, Visual Basic, Python or Java, our SDK for TRION is available for you. The DEWETRON TRION SDK is shipped with the necessary interface files for C/ C++ (.h -Files) and Pascal-dialects like Delphi (.pas – Files). Using these files, direct integration into the application can be achieved by including them. But this is not the limit, because many languages are supported indirectly. All public interface functions use the “stdcall” calling convention. DATA TYPES All public interface functions accept the following primitive data types: > 32-bit integers and pointers to 32-bit integers > 64-bit integers and pointers to 64-bit integers > Pointers to zero-terminated ASCIIStrings (no Unicode/wide string support) All public interface functions are accessible by using the standard C. Therefore, any programming language that allows the above mentioned perquisites can exploit the functionality of the API. DEWE2 EXPLORER INCLUDED If you’re using the TRION hardware, the API will install a DEWE2 Explorer application (delivered standard with all DEWE2 systems). Besides providing in-depth system information, this tool enables users to run self-tests of TRION modules, enable logging files in case of errors and to easily upgrade the firmware of TRION modules. The explorer can also create a virtual system in addition to the real one, to aid you in programming your own application even without the real hardware. 37 DEWETRON ACCESSORIES CAMERAS MOBILE DISPLAY CARRYING CASES FireWire and Ethernet cameras; Split-box for supplying and connecting Ethernet cameras External multi-touch display for mobile applications Carrying cases and transportation systems are available for all systems POWER SUPPLY SOLUTIONS CAR SEAT MOUNTING KITS CURRENT TRANSDUCERS Power supplies, battery and distribution boxes Car seat mounting kits for our mobile systems Several solutions for current measurement from simple shunts to current clamps and high-precision zero flux transducers SYNCHRONIZED TIME BASE GENERATOR GPS SENSORS ENCODER GPS based speed and displacement sensor Encoders for combustion analysis and torsional and rotational vibration applications The DEWE-CLOCK is a synchronized time base generator (absolute time) capable of using either GPS or IRIG as time source 38 SHORT FORM CATALOG SOLUTIONS YOUR MEASUREMENT APPLICATION ON OUR PRODUCTS GENERAL SOLUTIONS MIXED SIGNAL RECORDER, DYNAMIC SIGNAL ANALYZER, BALANCING, STROBE CAM, ORDER TRACKING, MODAL ANALYSIS, TORSIONAL & ROTATIONAL VIBRATION, TRANSIENT RECORDER, DISTRIBUTED SYSTEMS, AND MANY MORE AUTOMOTIVE COMBUSTION ANALYSIS, HYBRID TESTING, MEASURING BATTERIES, FUNCTIONAL SAFETY, ROAD LOAD DATA, BASIC BRAKE TEST, VEHICLE DYNAMICS, ADAPTIVE CRUISE CONTROL, TORSIONAL & ROTATIONAL VIBRATION, E-MOBILITY, RACE CAR, AND MANY MORE AEROSPACE FLIGHT TEST, ENGINE TEST, WIND TUNNEL TEST, MAINTENANCE, COMPONENT TEST, SYSTEM INTEGRATION LAB, NOISE AND VIBRATION, TACTICAL OR LAND VEHICLE, STRUCTURAL TEST, PCM TELEMETRY, MODAL TEST, AND MANY MORE ENERGY & POWER ANALYSIS POWER ANALYSIS, 3 TO 7-PHASE SYSTEMS, TEST BENCH, SOLAR INVERTERS, REAL DRIVE TEST, E-MOBILITY, FREQUENCY CONVERTER, POWER QUALITY ANALYSIS, MONITORING, GRID COMPATIBILITY, POWER CONVERTER TEST, AND MANY MORE TRANSPORTATION NOISE ORIGIN, CURRENT COLLECTOR TEST ON TRAINS, POWER SUPPLY OF RAILWAY SYSTEMS, BATTERY MEASUREMENT, TORSIONAL & ROTATIONAL VIBRATION, DISTRIBUTED MEASUREMENTS, MIXED SIGNAL RECORDING, AND MANY MORE 39 > > > > > 05/ 2017 DE-B160101E • All trademarks are acknowledged to be the property of their owners. Specificat io n subject t o chan ge w i t ho ut n o t i ce. Pr i n t ed i n t he USA. © DEW ETRO N Gm b H CUSTOMER CARE CENTER Maintenance Calibration Help Desk Training Upgrade DEWETRON Inc., Headquarters USA 2850 South County Trail, Unit 1 East Greenwich, RI 02818, USA Phone: +1-401-284-3750 E-Mail: [email protected] Web: www.dewetron.us GENERAL SOLUTIONS AUTOMOTIVE AEROSPACE ENERGY & POWER ANALYSIS TRANSPORTATION ABOUT DEWETRON DEWETRON is an Austrian manufacturer of precision Test & Measurement systems designed to help our customers make the world more predictable, efficient and safe. Our strengths lie in customized solutions that are immediately ready for use while also being quickly adaptable to the changing needs of the test environment and sophisticated technology of the Energy, Automotive, Transportation and Aerospace industries. More than 25 years of experience and innovation have awarded DEWETRON the trust and respect of the global market. There are more than 20,000 DEWETRON measurement systems and over 300,000 measurement channels in use in well-known companies worldwide. Choosing DEWETRON means, having a partner by your side who accompanies you every step of the way. DEWETRON employs over 150 people in 25 countries and is part of the TKH Group, a global corporation, that specializes in the development and supply of innovative solutions worldwide. DEWETRON quality is certified in compliance with ISO9001 and ISO14001.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project