First Choice for Security, Control and Communication

First Choice for Security, Control and Communication
First Choice for Security,
Control and Communication
ISSUE No. 54
Quality Products for Professionals
With the constant drive towards energy conservation we’ve
highlighted over 50 energy saving products within our range
Technical Advice Monday to Thursday
Why not take advantage of our Technical Advice Service. Whether it’s a detailed specification for a project,
advice on the right product, suitability for a particular environment or application, or simply a quotation,
just give us a call.
HOW TO CONTACT ERL
Speak to one of our professionals, not a machine, whenever you call ERL
Sales Orders 8.30am-5.00pm
Tel:
01923 255344
Email: [email protected]
Fax:
01923 255829
Technical Advice Service - Monday to Thursday
Tel:
01923 220277
Email:
Fax:
[email protected]
01923 255829
Website
www.electroreplacement.com
Visit our website for more information
New Products at a Glance
Stainless Steel
Audio Door Panels
Stainless Steel
Video Door Panels
Architectural Modular
Door Entry Systems
Coded Access
PAGE 2
PAGE 3
PAGE 4-5
PAGE 16
Hands Free
Monitor
Proximity Access
System
Emergency Door
Release
Maglocks
PAGE 16
PAGE 26
PAGE 20, 21
Door Retainers
Wireless Entry
Alert Alarm
Emergency Exit
Alarm
PAGE 24
PAGE 26
PAGE 27
PAGE 29
Call Point with
Protective Cover
Vandal Resistant
Equipment
Industrial
Controls
Electric Door
Opening/Closing
PAGE 29
PAGE 30
PAGE 60
PAGE 31
Toilet Alarm Kits
CAT5E Patch
Panels
Wallplates with
Cable Entry
CAT5E Cables
PAGE 33
PAGE 41
PAGE 44
PAGE 44
Bluetooth Dongle
for Timeswitch Setup
Staircase Lightswitch
Timelag Controller
PIR Motion
Detectors
Photo Electric
Controls
PAGE 45-46
PAGE 47
PAGE 8
3 Position Key
Switch
• • •
UP
OFF
DOWN
PAGE 36
PAGE 36
SECURITY
STAINLESS STEEL AUDIO DOOR ENTRY SYSTEMS
ADSS2
ADSS1
ADSSC1
ADSS6
PANEL SIZES
LIGHTING
CONTROLS
TV AMPLIFIERS
TIME
CONTROLS
DISABLED
SECURITY
2
Flush
Surface
197 x 90mm
200 x 92mm
COMMUNICATIONS
INDUSTRIAL
CONTROLS &
THERMOSTATS
STAINLESS STEEL AUDIO DOOR ENTRY KITS
Surface
ADSS1/S
ADSS2/S
ADSS3/S
ADSS4/S
ADSS5/S
ADSS6/S
Flush
ADSS1/F
ADSS2/F
ADSS3/F
ADSS4/F
ADSS5/F
ADSS6/F
Units
each
each
each
each
each
each
Larger systems available P.O.A.
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
O R D E R I N G D ATA
STAINLESS STEEL AUDIO DOOR ENTRY WITH CODED PANEL
No. of Stations
Surface
1
ADSSC1/S
2
ADSSC2/S
Larger systems available P.O.A.
DO YOU NEED A LOCK?
SEE PAGES 19-22
FEATURES
O R D E R I N G D ATA
No. of Stations
1
2
3
4
5
6
INS/UP
ADSSC2
Flush
Units
ADSSC1/F
ADSSC2/F
each
each
• Flat front panel made of stainless steel
(2mm thick)
• Available for flush or surface mounting
• Digital 2-core installation
• IP44
• Privacy Features: prevents overhearing
between stations
• Stainless steel back-lit button(s)
• Back-lit name plate(s)
• Speaker, microphone & balance. Can
be individually adjusted
• Lock opening (12V DC), timed 4 sec
output
• Additional input to connect door exit
button
• Magnetic handset retainer
• Adjustable ringer volume
• Integrated coded access (ADSSC1/2
range)
• 300m max run
• Additional features can be achieved
using the CDN/USB interface cable
along with the free software and the
use of a computer. Optional modules
available to control gates, lights,
barriers etc.
• Multiple handsets can be connected to
each station (handset INS-UP 720 MR &
DC power supply). Optional
handsets/power supply are available.
Handset INS-UP 720 MR for special
order only.
EACH KIT CONTAINS
• Door Panel
• Power Supply (12V AC)
• Handset(s) (INS-UP)
Catalogue No.
ACCESSORIES
Description
Units
CDN-I/O
CDN/USB
I/O Module suitable for Audio System
Interface cable for App
each
each
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277
Digital system
2 cores only required
EMAIL [email protected]
SECURITY
SECURITY
STAINLESS STEEL COLOUR VIDEO DOOR ENTRY SYSTEMS
3
DISABLED
TIME
CONTROLS
PANEL SIZES
Flush
Surface
VDSSC2
VDSSC1
286 x 90mm
288 x 92mm
TV AMPLIFIERS
VDSS3
VDSS2
VDSS1
DO YOU NEED A LOCK?
SEE PAGES 19-22
LIGHTING
CONTROLS
VDMONB7
VDMONW7
DOOR PANEL FEATURES
Units
each
each
each
Units
each
each
each
each
each
each
each
each
each
EACH DOOR KIT CONTAINS
• Door Panel
• Power Supply (max 3 monitors)
• Back Box
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
ACCESSORIES
Description
4” Video Monitor
7” Video Monitor - White
7” Video Monitor - Black
Audio handset for Video System
Module for Video Panels
Proximity Fob
PSU for Video (3 output)
Electric Door Lock 8-12V AC/DC
Interface cable for App
TEST EQUIPMENT
& TOOLS
Catalogue No.
VDMON4
VDMONW7
VDMONB7
VDHS
PRO-I/O
PFOB
VDPSU
EDL
CDN/USB
CABLE
PROTECTION
STAINLESS STEEL CODED ACCESS VIDEO DOOR ENTRY KITS
No. of Stations
Surface
Flush
Units
1
VDSSC1/S
VDSSC1/F
each
2
VDSSC2/S
VDSSC2/F
each
INDUSTRIAL
CONTROLS &
THERMOSTATS
STAINLESS STEEL VIDEO DOOR ENTRY KITS
No. of Stations
Surface
Flush
1
VDSS1/S
VDSS1/F
2
VDSS2/S
VDSS2/F
3
VDSS3/S
VDSS3/F
MONITOR FEATURES
4" Monitor (VDMON4)
• Wide angle lens (adjustable)
• Manual monitor ON function
• Built in proximity token reader (max
• Magnetic phone holder
10 fobs per station - not supplied)
• LCD Screen – Colour
• Infra-red lighting
7" Monitor (VDMONW7 or
• Connect using Cat 5e with (RJ45) or
VDMONB7)
without terminals (screw block)
• Intercom between monitors (audio)
• Max run 70m (upto 300m using
additional PSU’s) Door Station to
• Selectable ring tone
Monitor
• Adjustable volume/colour/brightness
• IP44
• Manual monitor ON function
• Timed lock output 12V DC (4 sec ON)
(max 30 minutes)
• Simple set up coding procedure
• Simple set up coding procedure
• Heated Camera
• Available with black or white frame
• Hands free operation
Add monitor(s) of your choice and
additional Power Supply(s) as required • Lock override facility
Add lock as required. Lock output 12V DC • Acoustic feedback on button activations
• Glass LCD screen with touch switches
Note: Additional Power Supply(s) and
interfaces maybe required.
• Lock override facility
• Proximity token audible notification to
Note: A handset (VDHS) is available
Monitor
where audio communication will suffice.
COMMUNICATIONS
VDMON4
SECURITY
4
DISABLED
SECURITY
ARCHITECTURAL MODULAR RANGE - AUDIO/ACCESS CONTROL
TIME
CONTROLS
HT40
COMMUNICATIONS
LIGHTING
CONTROLS
TV AMPLIFIERS
APT/A1
APT/A2
PANEL SIZES:
1
2
3
4
Surface
Flush
APT/A1/S
APT/A2/S
APT/A3/S
APT/A4/S
APT/A1/F
APT/A2/F
APT/A3/F
APT/A4/F
Units
each
each
each
each
ACCESSORIES
Description
Additional Handset – White
Security Plate Pin Key
Units
each
each
• 2 wire Qwikbus wiring
• Simple installation and set-up
• Surrounds - high quality aluminium castings (1-8 module size) for both fascia and
surface housing
• ABS module fascia
• Surrounds/modules can be hung vertically or horizontally (e.g.3x1 or 1x3)
• Slim door panels: Flush (16mm) and surface (42mm) mounting
• Titanium coloured finish (Titan). Other finishes available to order.
• Magnetic handset hang-up (HT40 & VH40)
• Adjustable ring tones and volume
• 12V AC lock output
• Noble crystal glass screens with touch Screen functions (video)
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
APPLICATIONS
FUSES & GENERAL
PRODUCTS
SEE PAGES 19-22
FEATURES
Larger systems available P.O.A.
Catalogue No.
HT40
13510
DO YOU NEED A LOCK?
244 x 130mm
O R D E R I N G D ATA
ARCHITECTURAL AUDIO DOOR ENTRY KITS
No. of Stations
APT/A4
APT/A3
Ideal for applications where both style and high quality products are required.
We are able to offer a range of Kits made up of panels and modules for both video and audio
receivers.
These Kits can be for a single dwelling, apartments and commercial applications.
Hands-free monitors and phones are available
Also available are additional modules and panels to enhance the system and/or to further
control access. Choose from a simple key switch through to a fingerprint reader.
EACH AUDIO KIT CONTAINS
•
•
•
•
•
•
2 module surround
Call button(s) module
Audio module
Surface or flush back box
Handset(s)
Power supply/amplifier
CABLE REQUIREMENTS
2 core
MAXIMUM CABLE RUN
Cable Spec
(mm)
0.6
0.8
1.0
Audio
(m)
150
300
450
Video
(m)
75
150
225
MODULES AVAILABLE
1
2
3
4
Video Camera
Single Push
Information
Motion Detector
1
5
6
7
8
2
9
10
11
12
Digital Display
Triple Push Double Push
Entry Keypad – Plastic
Proximity Card Reader
3
13
14
15
16
Audio
Double Push
Blanking Plate
Fingerprint Reader
4
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277
5
6
Entry Keypad – Metal
Quad Push
Coded Entry
Key Switch
7
8
EMAIL [email protected]
5
SECURITY
SECURITY
ARCHITECTURAL MODULAR RANGE - VIDEO/ACCESS CONTROL
HF Monitor
DISABLED
TIME
CONTROLS
APT/V3
APT/V2
PANEL SIZES:
APT/V4
VFS1000
344 x 130mm
LIGHTING
CONTROLS
O R D E R I N G D ATA
ARCHITECTURAL COLOUR VIDEO DOOR ENTRY KITS
No. of
Hands Free
Hands Free
Units
Stations Surface
Flush
Surface
Flush
1
APT/V1/S APT/V1/F APT/V1HF/S APT/V1HF/F each
2
APT/V2/S APT/V2/F APT/V2HF/S APT/V2HF/F each
3
APT/V3/S APT/V3/F APT/V3HF/S APT/V3HF/F each
4
APT/V4/S APT/V4/F APT/V4HF/S APT/V4HF/F each
COMMUNICATIONS
VH40
Larger systems available P.O.A.
ACCESSORIES
Catalogue No.
Description
13510 Security Plate Pin Key
VH40
Video Monitor with Handset
VFS1000 Video Monitor
Units
each
each
each
INDUSTRIAL
CONTROLS &
THERMOSTATS
EACH VIDEO KIT CONTAINS
CABLE REQUIREMENTS
2 core
3 module surround
Video module
Call button(s) module
Audio module
Surface or flush back box
Monitor(s)
Power supply/amplifier
DO YOU NEED A LOCK?
SEE PAGES 19-22
CABLE
PROTECTION
MODULES AVAILABLE
5
6
7
8
Video Camera
Single Push
Information
Motion Detector
10
11
12
9
10
11
12
13
14
15
16
Audio
Double Push
Blanking Plate
Fingerprint Reader
13
14
Entry Keypad – Metal
Quad Push
Coded Entry
Key Switch
15
16
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
9
Digital Display
Triple Push Double Push
Entry Keypad – Plastic
Proximity Card Reader
TEST EQUIPMENT
& TOOLS
1
2
3
4
TV AMPLIFIERS
APT/V1
SECURITY
DELUXE DOOR ENTRY SYSTEMS
DISABLED
SECURITY
6
TIME
CONTROLS
HT3003W
with TZ1003
DPK1F
DPK1S
SECURITY
DO YOU NEED A LOCK?
SEE PAGES 19-22
STYLE
COMMUNICATIONS
LIGHTING
CONTROLS
TV AMPLIFIERS
With
DPK2S
DPK8S
DPK10S
INDUSTRIAL
CONTROLS &
THERMOSTATS
DPK4S
DPK6S
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
O R D E R I N G D ATA
DOOR ENTRY KITS
Surface Mounted
Flush Mounted
No. of
Stations
Silver
Effect
Silver
Effect
1
2
3
4
5
6
7
8
10
12
DPK1S
DPK2S
DPK3S
DPK4S
DPK5S
DPK6S
DPK7S
DPK8S
DPK10S
DPK12S
DPK1F
DPK2F
DPK3F
DPK4F
DPK5F
DPK6F
DPK7F
DPK8F
DPK10F
DPK12F
Larger systems available P.O.A.
Note: A spare button is required on panel if “Tradesman facility” is required. (DUO/N)
Cable
Core
6
7
8
9
10
11
12
13
15
17
APPLICATIONS
Extremely robust, hard wearing and attractive systems, ideally suited for applications that
require a single or multi-station facility.
Systems can be ordered as a kit with surface or flush mounting panels, or as individual items
for bespoke applications.
EACH KIT CONTAINS
• Door Entry System Panel
• Telephone Handset(s)
• NH200TV Power Supply/Amplifier
for cable runs up to 80 metres and for
powering a 12V AC lock, e.g. EDL
WHY NOT ORDER ONE OF OUR MULTIMETERS
TO HELP YOU INSTALL OUR PRODUCTS?
SEE PAGE 64
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
SECURITY
7
O R D E R I N G D ATA
ILLUMINATED
NAMEPLATES
D E S I G N E R D O O R E N T RY K I T S
Description
Units
DPK501
DPK502
HT3003W
TZ1003
EDL
1 Station Kit
2 Station Kit
White Handset
Handset Desk Mounting Kit
Electric Door Lock 8-12V AC/DC
each
each
each
each
each
APPLICATIONS
Stylish door entry kits, ideally suited for
modern residential and commercial buildings.
MR SM
ITH
MRS JO
NES
DPK502
CABLE REQUIREMENTS
DPK501 - 5 Core
DPK502 - 6 Core
Add 1 core if using lock
DO YOU
NEED
A LOCK?
EXPANDABLE UP TO
3 HANDSETS PER STATION
DELUXE DOOR ENTRY SYSTEMS (cont’d)
O R D E R I N G D ATA
T E L E P H O N E H A N D S E T S - M A X I M U M 3 P E R S TAT I O N
Incorporating a door lock release button. Designed for wall mounting as standard. Maximum
of 3 handsets can be connected per station.
Catalogue No.
Description
Units
HT3003W
TZ1003
White Handset
Handset Desk Mounting Kit
each
each
Catalogue No.
Description
HT3003/R7 White Handset with Variable Tone Inset
Units
Units
TT1F
TT2F
TT3F
TT4F
TT5F
TT6F
TT7F
TT8F
TT10F
TT12F
each
each
each
each
each
each
each
each
each
each
200 x 130
225 x 130
250 x 130
275 x 130
300 x 130
325 x 130
350 x 130
250 x 205
275 x 205
300 x 205
Description
Units
NH200TV
NH200HV
Power Supply/Amplifier up to 80m run
Power Supply/Amplifier up to 150m run
each
each
each
ELECTRIC DOOR LOCK
EDL Electric Door Lock 8-12V AC/DC suitable for surface/recessed mounting locks fixed to
wooden doors opening inwards. (fail secure).
Description
Units
EDL
Electric Door Lock 8-12V AC/DC
each
each
DOOR ENTRY SYSTEM SPARES
Catalogue No.
Description
Units
SP70
SP50
TE70
TE50
TT/MIC
10510
10530
10548
NS1
R2007
70mm Speaker
50mm Speaker
Microphone/70mm Speaker Assembly
Microphone/50mm Speaker Assembly
Microphone TT Panel
Push Button TT Panel
Neon Lamp for Surface TT Panel
Neon Lamp for Flush TT Panel 3 Station+ Units
Handset Buzzer
Variable Tone Inset
each
each
each
each
each
each
each
each
each
each
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
Catalogue No.
EXTENSION SOUNDER
AC/DC Extension Sounder
TEST EQUIPMENT
& TOOLS
D O O R / G AT E O P E N I N G M O D U L E
RT27
CABLE
PROTECTION
Catalogue No.
2 Door Intercommunication/Opening Module
Catalogue No. H x W (mm)
each
each
each
each
each
each
each
each
each
each
206 x 134
231 x 134
256 x 134
281 x 134
306 x 134
331 x 134
356 x 134
256 x 210
281 x 210
306 x 210
each
POWER SUPPLIES/AMPLIFIERS
AC/DC single units, fitted with an adjustable gain control for speech/volume adjustment to
suit local background noise.
TU1007A
Units
TT1S
TT2S
TT3S
TT4S
TT5S
TT6S
TT7S
TT8S
TT10S
TT12S
INDUSTRIAL
CONTROLS &
THERMOSTATS
T E L E P H O N E H A N D S E T S - M A X I M U M 1 0 P E R S TAT I O N
All handsets must be same type.
Catalogue No. H x W (mm)
COMMUNICATIONS
ADDITIONAL/INDIVIDUAL ACCESSORIES
DOOR ENTRY SYSTEM PANELS
Surface Mounted
Flush Mounted
Aluminium standard finish
Aluminium standard finish
LIGHTING
CONTROLS
SEE PAGES
19-22
TV AMPLIFIERS
• Door Panel
• Telephone Handset(s)
• NH500TV Power Supply/Amplifier
for cable runs up to 80 metres and
for powering a 12V AC lock, e.g. EDL
Stylish slimline door panel (surface)
Aluminium silver finish front panel
Illuminated buttons and name plates
Up to 3 handsets per station
High quality audio communication
TIME
CONTROLS
EACH KIT CONTAINS
DPK501
FEATURES
•
•
•
•
•
DR YES
1 THE PLACE
LONDON
E11 1EL
DISABLED
Catalogue No.
SECURITY
DESIGNER DOOR ENTRY SYSTEMS
SECURITY
DESIGNER COLOUR VIDEO DOOR ENTRY SYSTEM
O R D E R I N G D ATA
VANDAL
RESISTANT
ULTRA SLIM
30mm MONITOR
DISABLED
SECURITY
8
EXPANDABLE
TIME
CONTROLS
Catalogue No.
Description
Units
VID1/HF/CS
VID1/HF/CM
EDL
T4812/N
Single Station Kit Colour
Additional Monitor Colour
Electric Door Lock 8-12V AC/DC
Transformer 12V AC
each
each
each
each
FEATURES
VID1/HF/CS
TIMED LOCK RELEASE
DO YOU NEED A LOCK?
SEE PAGES 19-22
TV AMPLIFIERS
D E S I G N E R V I D E O D O O R E N T RY
• High quality video and audio output
• Will operate at low light levels
• Up to 3 additional monitors and
additional door panel
• Volt free lock output (requires separate
power supply and lock)
• Monitor incorporates ‘spy facility’ button,
allowing camera view to be seen without
door panel button being activated
• Ring/Speech volume, colour and
brightness controls
EACH KIT CONTAINS
• Door Panel (surface) (58x135x49mm)
• Monitor (7” LCD screen)
(221x147x30mm)
• Power supply (DIN/surface) to monitor
PRODUCT SPECIFICATION
System incorporates wide angle camera
lens, capable of working at low light levels
(white LED illumination). If fitting EDL, a
T4812/N is required.
CABLE REQUIREMENTS
4 core cable
ECONOMY DOOR ENTRY SYSTEM
O R D E R I N G D ATA
TIMED LOCK RELEASE
LIGHTING
CONTROLS
BACKLIT
NAME PANEL
E C O N O M Y V I D E O D O O R E N T RY
Catalogue No.
Description
Units
VID1/ES
EDL
T4812/N
Single Station Kit (black/white)
Electric Door Lock 8-12V AC/DC
Transformer 12VAC
each
each
each
EACH KIT CONTAINS
VID1/ES
SEE PAGES 19-22
•
•
•
•
1 x Door Panel (surface)
1 x Monitor
Power Supply (monitor)
Fixing Kit
CABLE REQUIREMENTS
4 core cable
O R D E R I N G D ATA
B & W A N D C O L O U R V I D E O D O O R E N T RY K I T S
VANDAL
RESISTANT
HIGH
QUALITY
EXPANDABLE
VD1/CK
DO YOU NEED
A LOCK?
SEE PAGES 19-22
Catalogue No.
Description
Units
VD1/BWK
VD1/CK
VCD1/MON
VCD1/CK/MON
EDL
T4812/N
Single Station Kit (black/white)
Single Station Kit (Colour)
Additional Monitor (black/white)
Additional Monitor Colour
Electric Door Lock 8-12V AC/DC
Transformer 12V AC
each
each
each
each
each
each
EACH KIT CONTAINS
FEATURES
VIDEO & AUDIO
OUTPUT
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
DO YOU NEED A LOCK?
Quality video and audio output
Metal silver finish door panel (surface)
Volume and brightness controls
Will operate at low light levels
Monitor incorporates ‘spy facility’ button,
allowing camera view to be seen without
door panel button being activated
• Volt free lock output (requires separate
power supply and lock)
B&W AND COLOUR VIDEO DOOR ENTRY SYSTEMS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
FEATURES
•
•
•
•
•
VD1/BWK
• Quality video and audio output
• Compact metal door panel (surface)
• Expandable run up to 4 monitors and 2 door
panels
• Ring/Speech volume, colour and brightness controls
• Will operate at low light levels (LED illumination)
• Monitor incorporates facility for camera view to
be seen without door panel button being activated
• Volt free lock output (requires separate power
supply and lock)
• IP55
•
•
•
•
1 x Door Panel (surface)
1 x Monitor
Power Supply (monitor)
Fixing Kit
CABLE REQUIREMENTS
4 core cable
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
SECURITY
9
O R D E R I N G D ATA
EXPANDABLE UP TO
3 ADDITIONAL MONITORS
V I D E O D O O R E N T RY / C O D E D A C C E S S K I T S
Description
VCD1
VCD1/MON
VCD1/CK
VCD1/CK/MON
EDL
PS1A25SM12
1 Station Kit - black/white
Monitor - black/white
1 Station Kit - Colour
Additional Monitor - Colour
Electric Door Lock 8-12V AC/DC
1.25A 12V In-line Switch-Mode Power Supply
Units
each
each
each
each
each
each
DO YOU
NEED
A LOCK?
DISABLED
Catalogue No.
SECURITY
B/W
AND ACCESS
COLOURAUDIO
CODEDDOOR
ACCESSENTRY
VIDEOSYSTEM
DOOR ENTRY SYSTEM
CODED
SEE PAGES
19-22
TIME
CONTROLS
APPLICATIONS
Suitable for houses, shops, offices, industrial units and any security sensitive areas where
entry should be restricted.
FEATURES
• Robust slimline door panel with integral rain shield
• Combines video door entry with coded access facility
• Slimline 1 Station Door Panel - surface
size 76(W)x181(H)x59(D)
• Monitor (black/white)
size 195(W) x245(H)x85(D)
• Power Supply (each monitor)
• Fixing Kit
• Can add 3 additional monitors
• Good quality 2 way communication
and video
• Illuminated press buttons on door panel
• Works at low light levels
• 50 user coded access panel
• Programmable lock timer (1-99 secs)
• Volt free lock output
• Slimline 1 Station Door Panel - surface
size 76(W)x181(H)x59(D)
• Monitor (Colour)
size 195(W) x245(H)x85(D)
• Power Supply (each monitor)
• Fixing Kit
• Can add 3 additional monitors
• Good quality 2 way communication
and video
• Illuminated press buttons on door
panel
• Works at low light levels
• 50 user coded access panel
• Programmable lock timer (1-99 secs)
• Volt free lock output
VCD1
ILLUMINATED
BUTTONS
COMMUNICATIONS
VCD1/CK
LIGHTING
CONTROLS
VCD1
TV AMPLIFIERS
EACH KIT CONTAINS
INDUSTRIAL
CONTROLS &
THERMOSTATS
CABLE REQUIREMENTS
4 common cores between monitor and
door station
Note:A suitable 12V DC power supply (not supplied) must be installed to power coded
access and lock.
Can include up to 2 door panels and up to 4 monitors per system.
CABLE
PROTECTION
FUSES & GENERAL
PRODUCTS
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
TEST EQUIPMENT
& TOOLS
VCD1/CK
SECURITY
SECURITY
10
DESIGNER ELECTRONIC DOOR ENTRY SYSTEMS (AUDIO)
O R D E R I N G D ATA
4110/AL/F
No. of
Stations
Surface
Mounted
Flush
Mounted
1
2
3
4
5
6
8
10
4110/AL/S
4220/AL/S
4130/AL/S
4140/AL/S
4150/AL/S
4260/AL/S
4280/AL/S
4210/AL/S
4110/AL/F
4220/AL/F
4130/AL/F
4140/AL/F
4150/AL/F
4260/AL/F
4280/AL/F
4210/AL/F
Cable
Core
5
6
7
8
9
10
11
12
ADDITIONAL ACCESSORIES
4140/AL/S
TV AMPLIFIERS
TIME
CONTROLS
DISABLED
D E S I G N E R E L E C T R O N I C D O O R E N T RY K I T S ( A U D I O )
Catalogue No. Description
Units
T700
Handset
EDL
Electric Door Lock 8-12V AC/DC
HS/DMK Desk Mounting Kit
711/AL
1-2 Station Rain Shield (Flush Only)
871/AL
1-2 Station Surface Box/Rain Shield (Slim)
705/AL
3-10 Station Rain Shield (Flush Only)
875/AL
3-10 Station/Combined Surface Box/Rain Shield (Slim)
DUO/N
Tradesman Timeswitch
Larger systems available P.O.A.
Note: A spare button is required on panel if “Tradesman facility” is required (DUO/N).
each
each
each
each
each
each
each
each
LIGHTING
CONTROLS
APPLICATIONS
Ideally suited for residential and commercial buildings requiring high quality, modern design
door entry systems.
4260/AL/S
4280/AL/S
PRODUCT SPECIFICATION
COMMUNICATIONS
The door panel is constructed from aluminium to give a long lasting weather resistant
finish. Cabling requirements are 4 common cores plus an additional core per station.
FEATURES
INDUSTRIAL
CONTROLS &
THERMOSTATS
•
•
•
•
•
EACH KIT CONTAINS
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
• Separate handset/door panel volume
control
• 12V AC lock output eg EDL
• Electronic call sound
• Internal or external use
• Optional rain shield available
T700
4210/AL/S
FUSES & GENERAL
PRODUCTS
Modern attractive design
Flush or surface mounting kits
Up to 3 handsets per station
High quality audio communication
Illuminated metal push buttons and
name plate
T700 with
HS/DMK
• Door panel
• Handset(s)
• 12V AC Transformer (surface/DIN rail
mounting)
• Vandal resistant fixing screws and tool
DESK
MOUNTING KIT
871/AL
DO YOU
NEED
A LOCK?
SEE PAGES
19-22
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
SECURITY
11
SECURITY
DESIGNER ELECTRONIC DOOR ENTRY SYSTEMS (VIDEO)
APPLICATIONS
Ideally suited for residential and commercial buildings requiring high quality, modern design
door entry systems.
O R D E R I N G D ATA
DISABLED
DESIGNER ELECTRONIC DOOR ENTRY KITS (VIDEO)
No. of Stations
No. of Stations
B&W Surface
B&W Flush
Unit
5110/AL/S
5220/AL/S
5130/AL/S
5140/AL/S
5150/AL/S
5260/AL/S
5280/AL/S
5210/AL/S
5110/AL/F
5220/AL/F
5130/AL/F
5140/AL/F
5150/AL/F
5260/AL/F
5280/AL/F
5210/AL/F
each
each
each
each
each
each
each
each
Colour Surface
Colour Flush
Each
5110/AL/FC
each
5110/AL/SC
1
Colour systems available P.O.A.
5110/AL/F
5140/AL/S
TV AMPLIFIERS
ADDITIONAL ACCESSORIES
Catalogue No.
Units
Description
each
each
each
each
each
each
each
each
each
each
each
5280/AL/S
5260/AL/S
COMMUNICATIONS
PRODUCT SPECIFICATION
The door panel is constructed from aluminium to give a long lasting weather resistant
finish. Cable requirements are 3 common cores & co-axial cable or Cat 5e using
EL560/EL562 adaptors regardless of size.
LIGHTING
CONTROLS
Monitor (black/white)
PMPLUS
Monitor (colour)
TEKNA/C
Electric Door Lock 8-12V AC/DC
EDL
1-2 Station Rain Shield (surface/flush)
711/AL
3-10 Station Rain Shield (surface/flush)
705/AL
Handset
T940PLUS
4 Outlet Splitter (co-axial)
D4L-PLUS
D6L-PLUS/2H 6 Outlet Splitter (Cat 5e)
Tradesman Timeswitch
DUO/N
Door Station Adaptor (Cat 5e)
EL-560
Monitor Adaptor (Cat 5e)
EL-562
Note: A spare button is required on panel if “Tradesman facility” is required (DUO/N).
TIME
CONTROLS
1
2
3
4
5
6
8
10
ADJUSTABLE
TILT CAMERA
FEATURES
•
• Adjustable tilt (up/down) camera with
polycarbonate ‘window’
• In-built infrared light ensures camera
works in low light levels
• Monitor intercom facility
• “Secure” communication between caller
and monitor
• Reversible fascia, blue - grey
• Optional rain shield available
• Handset (T940PLUS) can be added
where audio communication is sufficient
• Multiple door/gate entrances possible
711/AL
DO YOU
NEED
A LOCK?
5210/AL/S
SEE PAGES
19-22
•
•
•
•
TEST EQUIPMENT
& TOOLS
EACH KIT CONTAINS
CABLE
PROTECTION
•
•
•
•
Modern stylish design
Flush or surface mounting
Black/white or colour kits available
Up to 3 monitors per station
Illuminated metal push buttons and
name plate
Non-volatile memory
Electronic call sound
Internal or external use
Separate monitor/door panel volume
control
12V DC lock output - eg EDL
INDUSTRIAL
CONTROLS &
THERMOSTATS
•
•
•
•
•
Door panel
Monitor(s)
12V DC Power supply
Vandal resistant fixing screws and tool
TEKNA/C
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
PMPLUS
SECURITY
KITCHEN CALL INTERCOMS
ADD UPTO
2 MORE
HANDSETS
DISABLED
SECURITY
12
KITCHEN CALL INTERCOM
Catalogue No.
Description
Units
KIDP
KIDP/2
HT3003W
Kitchen Call Kit
2 Station Kitchen Call Kit
Additional Handset
each
each
each
TIME
CONTROLS
APPLICATIONS
FEATURES
Commercial kitchens; ideal for use in restaurants,
• Hands free conversation kitchen unit
cafés and public houses where orders need to be
• Adjustable volume
communicated easily and quickly to the kitchen
environment where hygiene is a priority.
KIDP
PRODUCT SPECIFICATION
Surface wall panel (kitchen unit),
handset(s) and power supply/amplifier.
CABLE REQUIREMENTS
6 Core
KIDP - EACH KIT CONTAINS
KIDP/2 - EACH KIT CONTAINS
• 1 Wall Panel
• 2 Handsets
• 1 Power Supply
• 1 Wall Panel
• 1 Handset
• 1 Power Supply
KEY CARD ENTRY / ENERGY CONTROL SYSTEM
KCE2/CC/S
CABLE
PROTECTION
ENERGY EFFICIENT
USE OF LIGHT AND POWER
IP65
TEST EQUIPMENT
& TOOLS
CREDIT CARD SIZE
FUSES & GENERAL
PRODUCTS
O R D E R I N G D ATA
K E Y C A R D E N T RY / E N E R G Y C O N T R O L K I T
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
TV AMPLIFIERS
O R D E R I N G D ATA
KEY CARDS
SURFACE MOUNTING - CAN BE USED FOR DOOR ENTRY
AND/OR CONTROL OF LIGHTING AND POWER
Catalogue No.
Description
Units
KCE1/CC/S
KCE2/CC/S
CARD/CC
EDL
1 Switch Key Card Entry/Energy Control Kit
2 Switch Key Card Entry/Energy Control Kit
Key Card Pack of 10
Electric Door Lock 8-12V AC
each
each
each
each
APPLICATIONS
EACH KIT CONTAINS
Offers a secure method of providing restricted
• 1 or 2 surface mounting card switches
entry as well as helping to reduce energy costs
• Control unit (25A) for door entry,
for hotels, boarding houses, schools and
lighting and air conditioning etc.
colleges, conference centres, fitness clubs,
•
10
x Key Cards
offices, laboratories and research
establishments.
FEATURES
• Suitable for installation in three
different ways:
1) One card switch installed outside a
room or building and one card switch
installed inside the room or building provides door entry (when wired to
an appropriate door lock) and
switching of lighting, air conditioning etc
2) One card switch installed outside a
room or building - provides door
entry (when wired to an appropriate
door lock)
3) One card switch installed inside
the room or building - provides
switching of lighting, air
conditioning etc
• Weatherproof (IP65) card switches
suitable for installation indoors and
outdoors
• Can be installed with an appropriate
door lock enabling room access to
keycard holders only
• Energy efficient use of light and power
• 35 second delay after card is removed
allows safe exit from room
• Back-lit card ‘sense’ indicator
• Neon locator
• Credit card size key cards
• Additional key cards available
• 2 separate memories (max 20 cards,
2 x 10) e.g. guests and staff
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
SECURITY
SECURITY
DOOR ENTRY SYSTEMS
13
O R D E R I N G D ATA
D E L U X E E C O N O M Y D O O R E N T RY S Y S T E M S
Catalogue No.
Description
Units
DPK1/ES
EDL
1 Station Kit
Electric Door Lock 8-12V AC/DC
each
each
DISABLED
APPLICATIONS
Recommended for applications where 1 station will suffice.
CABLE REQUIREMENTS
2 Core (min)
EACH KIT CONTAINS
TIME
CONTROLS
• 1 x Door station (surface)
• Handset
• Transformer 8V AC
FEATURES
Smart, slimline door panel
Door release function (volt free)
Surface mounted
Brushed Aluminium Fascia
TV AMPLIFIERS
•
•
•
•
FLASHING
INDICATOR
LIGHT
DPK1/ES
• LED push call indicator
• Electronic call tone
• Flashing LED light (hearing impaired)
LIGHTING
CONTROLS
SEE PAGES 19-22
UNIVERSAL REPLACEMENT HANDSET + ACCESSORIES
Catalogue No.
Description
Units
URH/HSN
URH/DF
HS/DMK
Universal Handset
Decorative Frame
Desk Mounting Kit
each
each
each
URH/DF
INDUSTRIAL
CONTROLS &
THERMOSTATS
O R D E R I N G D ATA
UNIVERSAL REPLACEMENT HANDSET
COMMUNICATIONS
DO YOU NEED A LOCK?
URH/HSN
CABLE
PROTECTION
APPLICATIONS
For use with most Door Entry systems. 5 wire
FEATURES
Ideal as a replacement or additional handset for existing systems
Wall or desk mounting
Attractive styling
Door release function
Will work with most 5 wire systems i.e. BPT, Comelit, Eagle, Farfisa, Fermax, LT
Terraneo, Siedle, Urmet, Videx etc.
• Decorative frame option, minimises redecoration
• Desk mounting kit option
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
URH/HSN with URH/DF
TEST EQUIPMENT
& TOOLS
FRAME TO COVER
UNSIGHTLY BLEMISHES
WHEN REPLACING
URH/DMK OLD HANDSET
•
•
•
•
•
SECURITY
CODED ACCESS AUDIO DOOR ENTRY PANEL
AUDIO &
CODED
ACCESS
O R D E R I N G D ATA
CODED ACCESS AUDIO DOOR ENTRY PANEL
No. of Stations Catalogue No.
TIME
CONTROLS
DISABLED
SECURITY
14
LIGHTING
CONTROLS
TV AMPLIFIERS
4403/AL/F
with 705/AL
T940 PLUS
DO YOU
NEED
A LOCK?
SEE PAGES
19-22
Description
Units
1 to 999 4403/AL/F Flush Coded Access Door Entry Panel
1 to 999 4403/AL/S Surface Coded Access Door Entry Panel
Select handset quantity to match number of stations and appropriate power supply(s)
T940PLUS White Handset
FA-PLUSC Power Supply - handset or monitor 10 max.
FA-PLUS/2 Power Supply - handset or monitor 50 max.
705/AL 3-10 Station Rain Shield (Flush Only)
EDL
Electric Door Lock 8–12V AC/DC
each
each
each
each
each
each
each
APPLICATIONS
The combined door intercom and coded access panel is ideally suited to residential and
commercial buildings where multi-user, secure access is required with high quality fittings.
PRODUCT SPECIFICATION
• Aluminium construction door panel for long lasting weather resistance
• Cabling requirements: 4 common cores plus one additional core per station
• Multiple entrance facility
• Digital display
FEATURES
• Flush or surface mounting door panels
• 1 to 999 stations
• Up to 3 handsets per station
• High quality audio communication
• Illuminated metal push buttons and nameplate
• Separate handset/door panel volume control
• Electronic call sound
• Internal or external use
• Non-volatile memory
• 12V DC timed lock output e.g. EDL
• Two access codes possible
• Integral tradesman timer
CODED ACCESS VIDEO DOOR ENTRY PANEL
O R D E R I N G D ATA
VIDEO &
CODED
ACCESS
1 to 999
1 to 999
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
Units
5403/AL/F Flush Coded Access B&W Video Door Entry Panel
5403/AL/S Surface Coded Access B&W Video Door Entry Panel
B&W monitor quantity to match number of stations and appropriate power supply(s)
PMPLUS
Black/white Monitor
T940PLUS White Handset
FA-PLUSC Power Supply – handset or monitor 10 max.
FA-PLUS/2 Power Supply – handset or monitor 50 max.
705/AL
3-10 Station Rain Shield (Flush Only)
EDL
Electric Door Lock 8–12V AC/DC
EL-560
Cat 5e Door Station Adaptor
EL-562
Cat 5e Monitor Adaptor
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
CODED ACCESS VIDEO DOOR ENTRY PANEL
No. of Stations Catalogue No. Description
5403/AL with 705/AL
DO YOU
NEED
A LOCK?
SEE PAGES
19-22
PMPLUS
each
each
each
each
each
each
each
each
each
each
APPLICATIONS
The combined video door intercom and coded access panel is ideally suited to residential and
commercial buildings where multi-user, secure access is required with high quality fittings.
PRODUCT SPECIFICATION
• Aluminium construction door panel for long lasting weather resistance
• Cabling requirements: 3 common cores and co-axial cable or Cat 5e cable using
EL-560/EL-562 adaptors.
• Multiple entrance facility
• Digital display
FEATURES
• Flush or surface mounting door panels
• Black and white or colour systems available
• 1 to 999 stations
• Up to 3 monitors per station
• Illuminated metal push buttons and nameplate
• Separate handset/door panel volume control
• Electronic call sound
• Internal or external use
• Non-volatile memory
• 12V DC timed lock output e.g. EDL
• Adjustable tilt (up/down) camera with
polycarbonate ‘window’
• In-built infrared light for low light operation
• Monitor intercom facility
• Secure communication between caller
and monitor
• Reversible monitor fascia, blue/grey
• Handset (T940PLUS) can be added
where audio communication is sufficient
• Two access codes possible
• Integral tradesman timer
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
SECURITY
15
SECURITY
CODED ACCESS AUDIO DOOR ENTRY SYSTEM
O R D E R I N G D ATA
COMBINED DOOR ENTRY/CODED ACCESS SYSTEM
Surface
Mounted
Flush
Mounted
1
2
4113/AL/S
4223/AL/S
4113/AL/F
4223/AL/F
NAME
PANEL
4113/AL/F
with 721/AL
ADDITIONAL ACCESSORIES
Description
Units
T-712VD
EDL
HS/DMK
721/AL
Handset
Electric Door Lock 8-12V AC/DC
Desk Mounting Kit
Rain Shield (Flush Only)
each
each
each
each
APPLICATIONS
One or two station audio door panel with coded access suitable for flats, shops, offices, industrial units,
clubs and any security sensitive areas where entry should be restricted.
EACH KIT CONTAINS
T-712VD
SLIMLINE
PANELS
ILLUMINATED
BUTTONS
• Door panel
• Telephone(s)
• Transformer
FEATURES
• Suitable for internal/external use
• Surface or flush mounting
• 8 lock codes can be programmed on
either lock output
• Memory retained after power loss
•
•
•
•
•
TV AMPLIFIERS
CABLE REQUIREMENTS
4113 - 5 core
4223 - 6 core
4223/AL/F
with 721/AL
Wrong code timed lockout
Anti tamper screws
Additional handsets (max 3 per system)
12V AC lock output
Name plate facility on door panel
DO YOU NEED A LOCK?
SEE PAGES 19-22
LIGHTING
CONTROLS
CODED ACCESS VIDEO DOOR ENTRY SYSTEM
O R D E R I N G D ATA
B/W Flush
5113/AL/F
5223/AL/F
1
2
No. of Stations
B/W Surface
Colour Flush
5113/AL/FC
5223/AL/FC
ADJUSTABLE
TILT CAMERA
Colour Surface
5113/AL/S
5113/AL/SC
5223/AL/S
5223/AL/SC
ADDITIONAL ACCESSORIES
1
2
Units
Monitor (black/white)
Monitor (colour)
Electric Door Lock 8-12V AC/DC
Rain Shield (Surface/Flush)
Handset
4 Outlet Splitter (co-axial)
6 Outlet Splitter (Cat 5e)
Monitor Adaptor (Cat 5e)
each
each
each
each
each
each
each
each
NAME
PANEL
TEKNA/C
5223/AL/F with 721/AL
DO YOU NEED A LOCK?
SEE PAGES 19-22
FUSES & GENERAL
PRODUCTS
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
TEST EQUIPMENT
& TOOLS
APPLICATIONS
One or two station video door panel with coded access suitable for flats, shops, offices, industrial units,
clubs and any security sensitive areas where entry should be restricted.
EACH KIT CONTAINS
CABLE REQUIREMENTS
• Door panel
RG59 + 3 cores or Cat 5e
• Monitor(s)
Additional monitors will require EL-562
• Transformer
• EL-560 and EL-562 (quantity to suit)
FEATURES
• Wrong code timed lockout
• Suitable for internal/external use
• Anti tamper screws
• Surface or flush mounting
• Additional monitors/handsets
• 8 lock codes can be programmed on
(max 3 per system)
either lock output
• Adjustable tilt camera
• Non-volatile memory
• Name plate facility on door panel
• 12V DC lock output
5113/AL/F with 721/AL
CABLE
PROTECTION
Description
PMPLUS
TEKNA/C
EDL
721/AL
T940PLUS
D4L-PLUS
D6L-PLUS/2H
EL-562
INDUSTRIAL
CONTROLS &
THERMOSTATS
Catalogue No.
ILLUMINATED
BUTTONS
COMMUNICATIONS
WHY NOT ORDER ONE OF OUR
MULTIMETERS TO HELP YOU
INSTALL OUR PRODUCTS?
SEE PAGE 64
COMBINED VIDEO DOOR ENTRY/ CODED ACCESS SYSTEM
No. of Stations
TIME
CONTROLS
Catalogue No.
DISABLED
No. of
Stations
SECURITY
STAINLESS STEEL PROXIMITY ACCESS SYSTEM
IP44
DISABLED
SECURITY
16
TIME
CONTROLS
TV AMPLIFIERS
PFRDR
PANEL SIZES:
Flush 130 x 111 mm
Surface 132 x 113 mm
DO YOU
NEED
A LOCK?
IP44
COMMUNICATIONS
LIGHTING
CONTROLS
PFRDR/F
PFRDR/S
Proximity Fob Reader Kit - Flush
Proximity Fob Reader Kit - Surface
each
each
Catalogue No.
PFOB
CDN/USB
ACCESSORIES
Description
Proximity Fob
Interface Cable for App
Units
each
each
PFRDR FEATURES
• Available in flush or surface options
• Will work on 12V AC or DC input
voltage
• 2mm stainless steel front plate
• IP44 rating
• 12V DC timed (4 sec) lock output
• Max 1536 proximity tokens can be
programmed
• Visual unlock display with 3 digit user
number
• Visual/audio unlock notification
• External lock release option
• 1A loading (24V) max
CDN/USB FEATURES
If using with optional USB and free Software
via a computer
• Control individual proximity fobs
• Adjust timed lock output (1 sec to 10 sec)
• Activate second coded relay output (0 sec
to 10 sec)
• Add modules to control lighting,
additional locks etc.
• Modify display
EACH KIT CONTAINS
Prox. Panel (flush or surface)
Power Supply (12V DC)
3 x Proximity Fobs
STAINLESS STEEL CODED ACCESS SYSTEM
STAINLESS STEEL CODED ACCESS KEYPAD KIT
Catalogue No.
Description
Units
KRDR/F
KRDR/S
Standalone Keypad - Flush
Standalone Keypad - Surface
each
each
Catalogue No.
Description
Units
CDN/USB
Interface Cable for App
each
ACCESSORIES
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
APPLICATIONS
Offices, computer rooms, schools, student accommodation, etc., where access needs to be
restricted to authorised personnel.
KRDR FEATURES
CDN/USB FEATURES
• Available in flush or surface options
• Will work on 12V AC or DC input
voltage
• 2mm stainless steel front plate
• IP44 rating
• 12V DC timed (4 sec) lock output
(Max 1A)
• 255 pre programmed codes (requires
user to enter allocation number and the
pre programmed 4 digit code for higher
security) or allows up to 8 user selected
4 digit codes
• External lock releasee option
• Visual/audio unlock notification
• 1A loading (24V) max
KRDR
PANEL SIZES:
TEST EQUIPMENT
& TOOLS
Units
APPLICATIONS
Offices, computer rooms, schools, student accommodation, etc., where access needs to be
restricted to authorised personnel.
SEE PAGES
19-22
FUSES & GENERAL
PRODUCTS
STAINLESS STEEL PROXIMITY ACCESS SYSTEMS
Catalogue No.
Description
Flush 130 x 111 mm
Surface 132 x 113 mm
DO YOU
NEED
A LOCK?
SEE PAGES
19-22
If using with optional USB and free Software
via a computer
• Control individual codes
• Adjust timed lock output (1 sec to 10 sec)
• Activate second coded relay output
(0 sec to 10 sec)
• Add modules to control lighting,
additional locks etc.
• Disable sounder
• Timed or toggle lock output
EACH KIT CONTAINS
Keypad Panel (flush or surface)
Power Supply (12V DC)
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
SECURITY
17
O R D E R I N G D ATA
SCAP/K/P
C O D E D A C C E S S PA N E L S A N D S Y S T E M S
Units
CAP/ES/P
CAP/ESK
CAP/EMK
SCAP/K/P
SCAP/K
MOV14V
each
each
each
each
each
each
Surface Mounted Panel - Aluminium
Surface Mounted Kit - Aluminium
Surface Mounted Kit - Aluminium
Surface Mounted Panel - Metal
Surface Mounted Kit - Metal
Varistor Spike Suppressor
CAP/EMK
• 1 x Coded Access Panel
• Power Supply (12V DC)
• MMLK Mini Maglock (Internal)
CABLE REQUIREMENTS
4 core alarm cable
•
•
•
•
1 TO 250
USER CODES
ILLUMINATED
KEYPAD
1 TO 20
USER CODES
DO YOU NEED
A LOCK?
CAP/ESK
CAP/EMK
CAP/ES/P
TOUCH SENSITIVE CODED ACCESS PANEL & SYSTEM
O R D E R I N G D ATA
T O U C H S E N S I T I V E C O D E D A C C E S S PA N E L & S Y S T E M
Description
Units
EPX20
EPX20/APT
EASIPROX/C
CARD/EP
FOB/EP
MOV14V
Surface Mounted Panel - Touch Sensitive
Surface Mounted Kit - Touch Sensitive
Easiprox Coder
Proximity Cards, Pack of 10
Proximity Fob
Varistor Spike Suppressor
each
each
each
each
each
each
COMPACT, LOW PROFILE
IP66
DO YOU NEED A LOCK?
SEE PAGES 19-22
For EASIPROX/C features see page 18
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
• Compact low-profile unit, measuring
only 116 x 77 x 17mm
• Up to 1000 users
• Non volatile memory
• Discrete, hidden secret-screw keypad
mounting
• Optional door bell function
(requires 8 ohm, 0.5W speaker)
TEST EQUIPMENT
& TOOLS
• Attractive, touch sensitive panel
• Choice of three operating modes;
coded access, proximity card/ keyfob,
coded access and proximity card/keyfob
• Suitable for internal and external use
(fully encapsulated electronics)
• Tri-colour LED illuminated keypad
• Audible verification of operation
EPX20/APT
CABLE
PROTECTION
APPLICATIONS
For internal and external applications, wherever access needs to be restricted and controlled.
EACH KIT CONTAINS
EPX20
EPX20/APT
• 1 x Coded Access Panel
•1 x Coded Access Panel
• 5 x Keycards
• 5 x Keycards
• Power Supply (12V DC)
• Electric Door Lock (12V DC)
FEATURES
TOUCH
SENSITIVE
INDUSTRIAL
CONTROLS &
THERMOSTATS
Catalogue No.
COMMUNICATIONS
SEE PAGES
19-22
LIGHTING
CONTROLS
SCAP/K
• 1 x Coded Access Panel
• Power Supply (12V AC)
• Electric Door Lock (12V AC)
Available in kit and ‘panel only’ versions
Vandal resistant
20 user code model - (CAP range)
250 user code model - (SCAP/K and /P)
Robust aluminium fascia - (CAP range)
Metal fascia- (SCAP range)
Surface models
Internal or external use
Illuminated keypad (CAP range)
Progressive times misuse lock out
Non volatile memory
Audio feedback on all facilities
Timed exit circuit
Voltage free relay contacts can provide
fail-secure and fail-open door locking
Two separate circuits - (CAP range)
Lock override - (CAP range)
CAP/ES/P - 12-24V DC operation
SCAP/K/P - 10-18V AC/DC operation
IP44
TV AMPLIFIERS
CAP/ESK
• 1 x Coded Access Panel
• Power Supply (12V DC)
• Electric Door Lock (12V DC)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FLUSH
APPEARANCE
TIME
CONTROLS
EACH KIT CONTAINS
FEATURES
COMPACT
DISABLED
Catalogue No. Description
APPLICATIONS
Computer rooms, laboratories, offices,
warehouses, research and development
workshops. Any sensitive area where entry
needs to be restricted.
SECURITY
CODED ACCESS PANELS & SYSTEMS
SECURITY
DISABLED
SECURITY
18
PROXIMITY CARD/KEYFOB ACCESS SYSTEM (EASIPROX)
INTERNAL OR EXTERNAL USE
EASIPROX
1 TO 2000
TIME
CONTROLS
USERS
TV AMPLIFIERS
FOB/EP
CARD/EP
ALLOWS EASY
REMOVAL/
ADDITION OF
INDIVIDUAL CARDS
O R D E R I N G D ATA
PROXIMITY CARD ACCESS SYSTEM
Catalogue No.
Description
Units
EASIPROX
CARD/EP
FOB/EP
EASIPROX/C
Proximity Card Kit
Pack of 10 Proximity Cards
Proximity Fob
Easiprox Coder
each
each
each
each
APPLICATIONS
Offices, computer rooms, schools, student accommodation, etc., where access needs to be
restricted to authorised personnel.
SYSTEM FEATURES
• Easy to set up and use
• 9 user cards supplied
• Can be installed surface or flush in a
standard 1 gang BS 25mm box
• Suitable for internal or external use
• Up to 2000 users using additional cards
(CARD/EP) or fobs (FOB/EP)
• Non volatile memory
• LED and audio signal indication
• Can be used with ‘push to exit’ switches
• Volt free contacts (timed 1-42 sec)
LIGHTING
CONTROLS
EACH KIT CONTAINS
• Proximity Reader/Control Panel
• 9 Proximity Cards
• Power Supply (12V DC)
• 1 Master Key Fob (for programming)
EASIPROX/C
DO YOU NEED A LOCK?
PROXIMITY CARD/KEYFOB/CODED ACCESS SYSTEM
SLIMLINE
O R D E R I N G D ATA
INDUSTRIAL
CONTROLS &
THERMOSTATS
ILLUMINATED
KEYPAD
CABLE
PROTECTION
Catalogue No.
Description
Units
SCAS/CP
CARD/EP
FOB/EP
SCAS/P
EASIPROX/C
Surface mounted slimline kit
Proximity Cards - pack of 10
Proximity Fob
Surface mounted slimline panel
Easiprox Coder
each
each
each
each
each
APPLICATIONS
Sensitive areas where entry has to be restricted. Suitable for internal and external applications
CARD/EP
SCAS/CP
TEST EQUIPMENT
& TOOLS
CODED PROXIMITY CARD/KEYFOB ACCESS SYSTEM
COMPACT UNIT
•
•
•
•
UP TO
1000
FOB/EP
CARD USERS
IP65
UP TO
10
PIN NUMBERS
DO YOU NEED A LOCK?
SEE PAGES 19-22
EACH KIT CONTAINS
Keypad control panel/proximity reader
• Power Supply (12V DC)
Electric Door Lock (12V DC)
• 3 x Proximity Cards
2 x Keyfobs
• Installation Kit
2 x MOV/Diodes
FEATURES
• Slimline compact unit
• Up to 1000 proximity card/keyfob and
10 pin numbers
• 2 x individual user groups
• Choice of access modes: Proximity
card/keyfob only; coded access only;
coded access together with proximity
card/keyfob
• Memory prevents duplicated card/fob
setting
• Non volatile memory
• 9 x pin number codes (5 digit).
• Robust aluminium housing with vandal
resistant screw
• Blue backlit keypad with audible
response when pressed
• Wrong input lockout function
• Integral anti-tamper switch
• Dual relays to control door lock switch
or other devices (Volt free)
• Weather resistant to IP65
• Lock timer (1-99 sec)
• Available separately as panel only
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
COMMUNICATIONS
COMMUNICATIONS
SEE PAGES 19-22
FUSES & GENERAL
PRODUCTS
EASIPROX CODER FEATURES
• Allows the addition or removal of a
single card/fob without the need of
totally clearing Easiprox users’ memory
• Can be used at different sites but will
only operate in conjunction with the
master card/keyfob
• Cannot be used by unauthorised
personnel to gain access – must always
be operated with the master card/
keyfob
• Powered by PP3 9V battery, supplied
• LCD display shows stored card/keyfob
number
• Compact 118 x 53 x 38mm size
SECURITY
19
O R D E R I N G D ATA
DOOR RELEASE LOCK KITS
Catalogue No.
Description
Units
LDRK/EMK
LDRK/EMK/BPS
each
each
each
each
each
DISABLED
each
each
each
each
TIME
CONTROLS
each
each
each
LDRK/ECK
LDRK/ECK/BPS
each
TV AMPLIFIERS
LDRK/EDL
Door Release Lock Kit
LDRK/MMLK
Door Release Lock Kit
LDRK/MMLK/BPS Door Release Lock Kit (boxed power supply)
LDRK/WE
Wait/Enter Indicator Door Release Lock Kit
LDRK/WE/BPS Wait/Enter Indicator Door Release Lock Kit
(boxed power supply)
LDRK/KDRS
Door Release Lock Kit
LDRK/KDRS/BPS Door Release Lock Kit (boxed power supply)
LDRK/EMK
Door Release Lock Kit (coded access)
LDRK/EMK/BPS Door Release Lock Kit (coded access with
boxed power supply)
LDRK/ECK
Door Release Lock Kit (coded access)
LDRK/ECK/BPS Door Release Lock Kit (coded access with
boxed power supply)
RT15
Timer Board for DC Locks - 1-15 seconds
RT110
Timer Board for DC Locks - 1 second to
10 minutes
For Door Release/Exit switches see pages 23-24
SECURITY
DOOR RELEASE LOCK KITS
APPLICATIONS
Enables doors to be opened remotely, securely and safely. Ideal for use in offices, jewellers,
shops, schools, factories, warehouses etc. Kits are available with standard or heavy duty boxed
power supplies which incorporate battery back-up
APPLICATIONS: LDRK/EDL
Suitable for surface/recessed mounting locks fitted to wooden doors opening inwards (fail secure).
APPLICATIONS: LDRK/MMLK; LDRK/WE; LDRK/KDRS; LDRK/EMK;
LDRK/ECK AND /BPS VERSIONS
For inward or outward opening doors (fail safe). This style of lock is often used on doors which
are part of a fire exit route.
LDRK/MMLK
MMLK magnetic lock
12V DC power supply
Push switch
Control relay/base
LDRK/KDRS/BPS
• MMLK magnetic lock
• 12V DC boxed power supply with
battery back-up facility
• Keyswitch
• Surface mounting box
LDRK/KDRS
LDRK/KDRS/BPS
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
LDRK/EMK/BPS & LDRK/ECK/BPS
• MMLK mini maglock (internal)
• 12V DC boxed power supply with
battery back-up facility
• 1 x Coded Access Panel
LDRK/WE/BPS
• MMLK magnetic lock
• 12V DC boxed power supply with
battery back-up facility
• Wait/Enter indictor panel
• Door release switch
TEST EQUIPMENT
& TOOLS
LDRK/EMK and LDRK/ECK
• 1 x Coded Access Panel
• 12V DC Power Supply
• MMLK mini maglock (Internal)
LDRK/WE
LDRK/WE/BPS
CABLE
PROTECTION
•
•
•
•
LDRK/MMLK/BPS
• MMLK magnetic lock
• 12V DC boxed power supply with
battery back-up facility
• Push switch
• Control relay/base
LDRK/MMLK
LDRK/MMLK/BPS
INDUSTRIAL
CONTROLS &
THERMOSTATS
LDRK/WE
MMLK magnetic lock
12V DC power supply
Wait/Enter indicator panel
Door release switch
LDRK/KDRS
MMLK magnetic lock
12V DC power supply
Keyswitch
Surface mounting box
COMMUNICATIONS
•
•
•
•
•
•
•
•
LIGHTING
CONTROLS
LDRK/EDL
• EDL electric lock
• 12V AC power supply
• Push switch
LDRK/EDL
SECURITY
TIME
CONTROLS
DISABLED
SECURITY
20
FAIL SAFE LOCKS
SAFETY END
CAPS ESSENTIAL
FOR ALL MMLK
LOCKS
MAGNETIC LOCKS (MMLK RANGE)
MMLK
MMLK/T
SEC/APT
FOR
INTERNAL
USE
MMLK/E
SUPPLIED
WITH
MOUNTING
BRACKETS
FOR
EXTERNAL
USE
TV AMPLIFIERS
MMLK, DMLK, MMLK/E
COMPACT
ONLY 71 x 32 x 21mm
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
MMLK/H
SEE PAGES 66-67
FOR POWER
SUPPLIES
O R D E R I N G D ATA
FAIL SAFE / OPEN / SECURE LOCKS
Catalogue No.
Description
Units
MMLK
MMLK/T
MMLK/E
MMLK/H
MEML/K
MPSD312/N
RT15
RT110
Mini Maglock (Internal) 12V/24V DC with brackets
Mini Maglock with Timer 12V/24V DC
Mini Maglock (External) with Z bracket
Mini Maglock/Handle (Internal)
Micro Electro-Magnetic Lock (Internal)
Power Supply 12V DC
Timer Board for DC Locks - 1-15 seconds
Timer Board for DC Locks - 1 second to 10 minutes
each
each
each
each
each
each
each
each
O R D E R I N G D ATA
SAFETY LOCK END CAPS
Catalogue No.
Description
Units
SEC/APT
Pair of Safety End Caps for MMLK Locks
each
APPLICATIONS: SEC/APT
For covering the exposed, hard-edged corners of mini maglocks, offering protection
against injury. Fitted in minutes to new and existing installations.Protects against injury from
sharp corners and edges. Offers an attractive finish to a mini maglock installation,mounting
screws supplied
MEML/K
SUITABLE FOR
OUTWARD
OPENING DOORS
APPLICATIONS: MMLK
This internal use mini maglock operates by means of electro magnetic force. It is suitable for
both inward or outward opening doors. It is supplied with Z and L mounting brackets. This
style of lock is often used on doors which are part of a fire exit route.
APPLICATIONS: MMLK/T
As MMLK but includes a timed hold off (adjustable 1-100 secs) and door monitor circuit, built into
magnet.
APPLICATIONS: MMLK/E
While similar in specification to the MMLK, this lock is designed for external use and
therefore suitable for securing gates/doors etc where the magnet will be exposed to the
elements. It is supplied with a fitted lead, Z mounting bracket and has a monitored circuit
built into the magnet. This style of lock is often used on doors which are part of a fire exit
route.
APPLICATIONS: MMLK/H
This is a fail safe magnetic lock incorporating a door grip. Designed for use with internal wooden and
aluminium doors. Magnet attaches to door frame on inside of unit allowing door frame internal
measurement to remain unaltered. Suitable for inward or outward opening doors. Door grip hides
magnetic lock on closure.
APPLICATIONS: MEML/K
A micro electro-magnetic lock, ideal for use on cupboards and lockers in laboratories,
pharmacies, hospitals, schools etc., where a door lock must open when voltage is removed or
where a keyed lock is impractical. Compact size of only 71 x 32 x 21mm, suitable for
outward opening doors and supplied with keeper plate and mounting screws.
TECHNICAL SPECIFICATION
Catalogue No.
Type
Operating Voltage(s)
MMLK
MMLK/T
MMLK/E
MMLK/H
MEML/K
MPSD312/N
Fail safe
Fail safe
Fail safe
Fail safe
Fail safe
Regulated
12/24V DC
300kg (600lb)
12/24V DC
300kg (600lb)
12/24V DC
400kg (800lb)
12/24V DC
300kg (600lb)
12/24V DC
36kg (80lb)
230V AC in 12V DC out - Power 1200mA
Holding Force
Use
Internal
Internal
External
Internal
Internal
Internal
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
SECURITY
21
ADJUSTABLE TIMER
TO DELAY ACTIVATION
SHOOT
BOLT
LOCK
MMLK/AK
DISABLED
SUITABLE FOR
INWARD AND
OUTWARD
OPENING DOORS
SECURITY
FAIL SAFE LOCKS
EB300
TIME
CONTROLS
DMLK
TV AMPLIFIERS
MM1200BKT
IP67
MM1200
FAIL SAFE / OPEN / SECURE LOCKS
Description
Units
EB300
DMLK
MM1200
MM1200BKT
MMLK/AK
MPSD312/N
RT15
RT110
Shoot Bolt
Double Mini Maglock (Internal) 12V/24V DC
Midi Maglock (Internal/External) 12V/24V DC
Z bracket for MM1200
Architectural Mini Maglock (Internal) with brackets
Power Supply 12V DC
Timer Board for DC Locks - 1-15 seconds
Timer Board for DC Locks - 1 second to 10 minutes
each
each
each
each
each
each
each
each
GENERAL APPLICATIONS
APPLICATIONS: MOV14V Use across AC or DC lock coils to minimise risk of
corruption/contact burn to door entry systems.
APPLICATIONS: RT15: RT110
Timer Board, variable 1.5 to 16 secs (RT15), 1 sec to 10 mins (RT110), 12/24V DC, for
use with door entry and magnetic locks. Allows timed unlocking of magnetic locks. Needs
suitable enclosure and power supply.
TECHNICAL SPECIFICATION
Catalogue No.
Type
Operating Voltage(s)
EB300
DMLK
MM1200
MMLK/AK
MPSD312/N
Fail safe
Fail safe
Fail safe
Fail safe
Regulated
12V DC
Bolted
Internal
12/24V DC
2x300kg (600lb)
Internal
12/24V DC
545kg (1200lb) Internal/External
12V DC
300kg (600lb)
Internal
230V AC in 12V DC out - Power 1200mA
Internal
Holding Force
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
APPLICATIONS: DMLK
This internal use double mini maglock operates by means of electro magnetic force. It is
supplied with mounting bracket. This style of lock is often used on doors which are part of a
fire exit route.
Use
TEST EQUIPMENT
& TOOLS
APPLICATIONS: MMLK/AK
This is a very attractive, stylish way of installing an electro-magnetic lock. It is suitable for both inward
and outward opening doors and ideal as part of a fire exit route. It is supplied with architectural Z and L
brackets for inward opening doors. The L bracket can be used on its own for outward opening doors.
NOTE: 12V DC Power Supply (MPSD312/N) suitable for use with all the above. See
also boxed power supplies on page 67
CABLE
PROTECTION
These locks can be used in a variety of applications where, for reasons of door/gate opening
or for safety, a lock must unlock when voltage is removed.
APPLICATIONS: EB300
This internal use shoot bolt operates by means of a solenoid. It is suitable for both inward
and outward opening doors. Door locking can be delayed by up to 9 seconds. Power
consumption of only 0.3A when locked @12V DC
APPLICATIONS: MPSD312/N
In-line power supply giving a regulated 12V DC output @ 2.25 amps. Ideal for running any
of the locks on pages 19-22.
INDUSTRIAL
CONTROLS &
THERMOSTATS
Catalogue No.
APPLICATIONS: MM1200
This stainless steel magnetic lock is suitable for both internal and external use (IP67) and
operates on 12/24V DC. Integral door monitoring circuit. Weight 5kg. Z and L brackets also
available to suit. (MM1200BKT)
COMMUNICATIONS
O R D E R I N G D ATA
SEE PAGES 66-67
FOR POWER
SUPPLIES
LIGHTING
CONTROLS
STYLISH
ATTRACTIVE
FINISH
SECURITY
SECURITY
22
FAIL OPEN/SECURE LOCKS
O R D E R I N G D ATA
S TA N D A R D L O C K S ( E D L R A N G E )
FAIL / OPEN / SECURE LOCKS
EDL and EDL/F
TIME
CONTROLS
DISABLED
EDL/DC
Units
EDL
EDL/F
EDL/DC
EDL/ANS
EDL/UPVC
EDL/UPVC/DC
EDL/U
MOV14V
Electric Door Lock 8-12V AC/DC
Electric Fail Open Lock
Electric Door Lock 12V DC
Electric Door Lock 12V DC
Electric Lock for UPVC Doors 12V AC
Electric Lock for UPVC Doors 12V DC
Electric Fail Open/Secure
Varistor Spike Suppressor
each
each
each
each
each
each
each
each
TV AMPLIFIERS
APPLICATIONS: EDL This is suitable for surface/recessed mounted locks fitted to
wooden doors opening inwards (fail secure).
APPLICATIONS: EDL/F This is a fail open solenoid operated lock for inward/outward
opening internal doors (mortice type). This type of lock releases the door catch when the
power is removed from the lock.
APPLICATIONS: EDL/DC This is a fail secure solenoid operated lock for inward opening
internal doors (mortice type). This type of lock secures the door catch when the power is
removed from the lock.
LIGHTING
CONTROLS
APPLICATIONS: EDL/ANS This is a fail open solenoid operated lock for outward
opening external doors (mortice type). This type of lock releases the door catch when the
power is removed from the lock. It is suitable for both hollow aluminium/metal frames
(brackets supplied) and also wooden jambs. Monitoring circuit.
APPLICATIONS: EDL/UPVC Stainless steel, suitable for use with UPVC doors opening
inwards. Supplied with two flush mounting plates, one of which is a longer version with a
cutout for a deadlock (not supplied). Available in AC and DC options. Adjustable face plate.
COMMUNICATIONS
INDUSTRIAL
CONTROLS &
THERMOSTATS
Description
GENERAL APPLICATIONS
These locks can be used in a variety of applications where, for reasons of door safety, a lock
must open or remain closed when voltage is removed.
EDL/ANS
APPLICATIONS: EDL/U An extremely versatile lock release with integral fail open and
fail secure functions with either 12 or 24V DC operation. Suitable for installation on wooden
frame doors, opening inwards.
APPLICATIONS: MOV14V Use across AC or DC lock coils to minimise risk of
corruption/contact burn to door entry systems.
EDL/UPVC
EDL/UPVC/DC
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
Catalogue No.
TECHNICAL SPECIFICATION
Catalogue No.
EDL/U
Type
EDL
Fail Secure
EDL/F
Fail Open
EDL/DC
Fail Secure
EDL/ANS
Fail Open
EDL/UPVC Fail Secure
EDL/UPVC/DC Fail Secure
EDL/U
Fail Open/Secure
Operating Voltage(s)
12V AC/DC
12V DC
12V DC
12V DC
12V AC
12V DC
12/24V DC
Holding Force
400kg
N/A
N/A
N/A
Use
Internal
Internal
Internal
Internal
Internal
Internal
Internal
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
SECURITY
23
IP66
SECURITY
DOOR RELEASE/EXIT SWITCHES
LARGE
22mm SWITCH
IP66
DISABLED
VANDAL
RESISTANT
EXIT
SWITCHES
IP66
TIME
CONTROLS
DRS/S
ESN/S
ES/S
TV AMPLIFIERS
IP66
LIGHTING
CONTROLS
WS433
ESGD/S
ESNGD/S
ESGD/S with SMF
DOOR RELEASE SWITCHES
Description
Units
ESGD/S
ES/S
ESN/S
DRS/S
ESNGD/S
SMF
Green Dome Door Release Switch - Surface 1 Gang
Exit Switch - Surface 1 Gang
Exit Switch Narrow - Surface
Door Release Switch 22mm Push - Surface 1 Gang
Green Dome Door Release Switch - Surface 1 Gang
Surface Mounting Metal Frame - 1 Gang
each
each
each
each
each
each
Transforms a momentary action normally open volt free contact into a timed wireless
switch, sending a signal up to 50m and activating a device for between 1 second and 4
hours. Ideal for sounders/bells e.g. call for assistance systems and indirect control of
lighting, or controlling electronically operated doors/gates/garage doors etc
O R D E R I N G D ATA
WS433
DOOR RELEASE SWITCHES
Wireless Switcher RX and TX
APPLICATIONS
Specifically designed for access control systems or electric lock installations, where high
usage is expected.
WS433 FEATURES
• Brushed stainless steel front plate
• Vandal resistant
• Surface mounting
(box supplied)
• Easy to operate
• N.O. and N.C. circuits
• Max. contact rating
2A @ 12/24V AC/DC
•
•
•
•
•
•
1 sec to 4 hours activation time
12/24V AC/DC operation
Volt free contacts 1 x N/O and 1 x N/C
2A rated @ 24V DC (10,000 cycles)
Program up to 12 remotes (TX)
75cm wiring harness
EACH KIT CONTAINS
1 x TX Transmitter
1 x 9V Battery
1 x RX Receiver
Instructions
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
ES & DRS/S Range:
Supplied with green plastic surface box. (Can be flush mounted using 25 mm 1-gang
deep box - not supplied) fitted on the surface
For additional surface mounted security an SMF can be added to a flush box (not
supplied). (Excludes ESN range)
Small PCB 0.8 x 1.2 x 0.2 in
9V Battery operated (supplied)
50m range (line of sight)
433MHz trransmitting frequency
Battery life - 60,000 operations (approx)
Pre-terminated cables for battery and
contacts
• Will work with any volt free N/O
contact
TEST EQUIPMENT
& TOOLS
PRODUCT SPECIFICATION
•
•
•
•
•
•
CABLE
PROTECTION
RX RECEIVER-
TX TRANSMITTER
FEATURES
each
INDUSTRIAL
CONTROLS &
THERMOSTATS
Catalogue No.
COMMUNICATIONS
WS433 PRODUCT SPECIFICATION
O R D E R I N G D ATA
SECURITY
BRUSHED STAINLESS STEEL DOOR RELEASE/EXIT SWITCHES
IP55
KDRS/M/F
& KDRS/F
ALSO AVAILABLE
MOMENTARY OR
MAINTAINED VERSIONS
DISABLED
SECURITY
24
ESLP/S
TIME
CONTROLS
PESLP/WS
•
•
OFF
•
DOWN
DRSP/S
80dB
SOUNDER
KRSD/F
LIGHTING
CONTROLS
TV AMPLIFIERS
UP
ESER
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
DRS/GDS
ESER FEATURES
O R D E R I N G D ATA
DOOR RELEASE SWITCHES
Catalogue No.
Description
Units
PESLP/WS
Exit Switch - Surface 1 Gang
ESLP/S
Exit Switch - Surface 1 Gang
KDRS/F
Key Operated Switch (momentary) - Flush 1 Gang
KDRS/M/F
Key Operated Switch (maintained) - Flush 1 Gang
ESER
Combined Exit Switch/Emergency Door Release
SMF
Surface Mounting Metal Frame - 1 Gang
DRSP/S
Door Release Switch - Surface
DRS/GDS
Door Release Switch - Surface
See page 32 for Disabled Persons Switches
ROLLER SHUTTER DOOR SWITCH
each
each
each
each
each
each
each
each
Catalogue No.
Description
Units
KRSD/F
3 position key Switch (momentary)
each
• Convenient dual function product in a
single housing
• Surface mounting
• Easy recognition, tough green
moulding
• Brushed stainless steel front plate
• Double pole contacts
• Security screws to aid vandal resistance
• Emergency Door Release fitted with
deformable plastic, no glass to break
• Loud 80db warning plus red LED
warning when Emergency Door
Release activated, 12/24V DC 20mA
• Hinged clear cover to prevent
accidental operation
• Simple key reset
• Supplied with two reset keys and one
hex wrench
PESLP/WS and ESLP/S FEATURES
• Coloured ring, easy recognition
• Tough surface box (supplied)
• Large 85mm push
• Contact rating 2A @ 12/24V AC/DC
• Stainless steel fascia
PRODUCT SPECIFICATION KRSD/F
APPLICATIONS
Specifically designed for access control systems or electric lock installations, where high
usage is expected.
FEATURES – KDRS SERIES
• Brushed stainless steel front plate
• Max. contact rating 2A @
• Vandal resistant
12/24V AC/DC
• Flush mounting (box supplied) or
surface mount using SMF
• Key operated version supplied with 2 keys
Ideal for controlling security roller shutters/blinds. Central off position and two
independent contacts for up/down operation
KRSD/F FEATURES
•
•
•
•
•
Max contact rating 4A
Stainless steel front plate
Central off position and two independent contacts for up/down operation
Supplied with 2 keys
Flush box supplied (use SMF for surface mounting)
DRSP/S FEATURES
Spring operated rocker switch with NO/NC contact and having a 10A rating. Supplied
with slim surface box.
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
SECURITY
25
SECURITY
ASSISTANCE SYSTEMS
ONLY 2 WIRES
REQUIRED
SZAK1/C4A
RELAY
SZAK2/C4A
IP66
DISABLED
WITH INTEGRAL
TIME
CONTROLS
SZAK/PSU/C4A
SZAK5/C4A
SZAK4/C4A
10 ZONE NETWORK PANEL
AVAILABLE (DIS10/C4A/NP)
SEE PAGE 33
The kits can be expanded to use additional call points and a variety of options including overdoor lights and local reset points. A door monitoring kit (SZAK5/C4A) is available and includes
an override switch.
COMMUNICATIONS
APPLICATIONS
These kits offer a simple but effective method of calling for assistance or raising an alarm. On operating the momentary switch, the main panel gives both audible and visual indication which
remains on until reset at the main panel. Using a concealed call button, (SZAK1/C4A) is ideal for doctors’ surgeries, interview rooms, banks, post offices, shops, pubs and clubs etc. The kit
can be expanded to use additional call points and a variety of options including overdoor lights, local reset points and sounders. The highly visible IP66 rated call point (SZAK2/C4A) can be
used in wet or steamy areas eg. pools, saunas and gyms etc. The non glass reset call point (SZAK3/C4A) This kit is designed to allow a caller to request assistance where steps of similar
obstacles deny access to a customer (SZAK4/C4A) is ideal for use where broken glass would be a hazard i.e. food preparation areas, changing rooms etc.
LIGHTING
CONTROLS
WIRELESS OPTION AVAILABLE
(WS433)
SEE PAGE 23
TV AMPLIFIERS
SZAK3/C4A
The SZAK/C4A/PSU panel is available to use with any volt free, normally open device to raise the call.
FEATURES
Catalogue No.
Description
•
•
•
•
RT27 FEATURES
Clear electronic tone
2 wire connection
Surface mounting
12V AC/DC operation
Output approx 80 dBa
SZAK1/C4A
• Alarm Controller/Power Supply
• Surface push
SZAK2/C4A
• Alarm Controller/Power Supply
• Emergency push switch (IP66)
SZAK3/C4A
• Alarm Controller/Power Supply
• Call for Assistance switch
SZAK4/C4A
• Alarm Controller/Power Supply
• Reset call point (non-glass)
SZAK5/C4A
• Alarm Controller/Power Supply
• Magnetic switch
• Keyswitch
Battery backup options (PP3) include
standard alkaline battery, rechargeable
battery or no battery. This applies
throughout the range.
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
•
•
•
•
•
5 kits available, all expandable
Attractive modern design
Simple to install - 2 wire
Re-chargeable battery back-up
(optional)
Constant sounder and flashing light alarm
Several call points may be connected to
one control panel
Additional components available to
expand the installation
(DIS1/C4A/IND, DIS1/C4A/RP,
RT27) and call push
Relay output for building management
input or for external devices as standard
(1 amp voltage free contacts)
TEST EQUIPMENT
& TOOLS
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
•
•
•
•
CABLE
PROTECTION
SZAK1/C4A
Single Zone Kit
MODULUX
Additional Call Point for SZAK1/C4A
SZAK2/C4A
Single Zone Kit
SC1/50/PFS/R Additional Call Point for SZAK2/C4A
SZAK3/C4A
Single Zone Kit
PFAS
Additional Call Point for SZAK3/C4A
SMF
Surface Mounting Metal Frame - 1 gang
SZAK4/C4A
Single Zone Kit
RP/YS
Additional Call Point for SZAK4/C4A
SZAK5/C4A
Door Monitor Kit
M1
Additional Call Point for SZAK5/C4A
SZAK/C4A/PSU Control Panel
DIS1/C4A/IND Indicator Light/Sounder
DIS1/C4A/RP Reset Point
DIS1/C4A/BAT Rechargeable Battery
RT27
AC/DC Extension Sounder
DTA/RBK
Replacement Battery Kit
PS1A25SM12 1.25A 12V In-line Switch-Mode Power Supply
Units
EACH KIT CONTAINS
INDUSTRIAL
CONTROLS &
THERMOSTATS
O R D E R I N G D ATA
E M E R G E N C Y / A S S I S TA N C E K I T S
SECURITY
ELECTROMAGNETIC DOOR RETAINERS (SURFACE & FLUSH WALL MOUNTING)
SURFACE
MOUNTING
MANUAL
TIME
CONTROLS
RELEASE BUTTON
LEFT OR RIGHT
HAND DOORS
TV AMPLIFIERS
LIGHTING
CONTROLS
Catalogue No.
Description
Units
DR24/S
DR24/F
PSU24
SMF
Surface Door Retainer
Flush/Surface Door Retainer
24V Power Supply
Surface Mounting Metal Frame - 1 gang
each
each
each
each
APPLICATIONS
Holds self-closing door open when
energized and releases door when fire
alarm/building management service
system is activated or when power supply
is interrupted. Can also be manually
released. Ideal for use in schools, hospitals,
theatres, offices, hotels etc. Can be fitted
to new or existing doors.
DR24/F
Catalogue No.
DR24/S
DR24/F
FEATURES
• Stainless Steel fascia (DR24/F)
• DR24/F can be flush mounted in a
standard 1 gang 35mm box (not
supplied) or surface mounted using the
35mm flush box and an SMF metal
frame
• Robust construction
• Can be used with any type of right or left
handed door
• Low current draw
• All units fitted with a manual release
button
• Anti-residual magnetism design
• Adjustable armature ensures correct
alignment with door
• Optional power supply available (max 7
retainers)
• Tested and certified to BS EN1155
TECHNICAL SPECIFICATION
Input Voltage
Current Draw
24V DC
60 mA
24V DC
50 mA
Holding Force
36kg (80 lb)
32kg (70 lb)
ELECTROMAGNETIC DOOR RETAINERS (SURFACE MOUNTING)
O R D E R I N G D ATA
E L E C T R O M A G N E T I C D O O R R E TA I N E R S
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
FLUSH
MOUNTING
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
E L E C T R O M A G N E T I C D O O R R E TA I N E R S
EACH KIT CONTAINS:
• Door retaining magnet
• Door retainer
• Fixing kit
DRM24S
FUSES & GENERAL
PRODUCTS
O R D E R I N G D ATA
DR24/S
DISABLED
SECURITY
26
Catalogue No.
Description
Units
DRM24S
DRM240S
PSU24
Surface Door Retainer
Surface Door Retainer
24V Power Supply
each
each
each
APPLICATIONS
Holds self-closing door open when
energized and releases door when fire
alarm/building management service
system is activated or when power supply
is interrupted. Can also be manually
released. Ideal for use in schools, hospitals,
theatres, offices, hotels etc. Can be fitted
to new or existing doors.
EACH KIT CONTAINS:
• Door retaining magnet
• Door retainer
• Fixing kit
DRM240S
Catalogue No.
DRM24S
DRM240S
FEATURES
• Stainless Steel fascia (DRM240S)
• Robust construction and metal body
• Can be used with any type of right or left
handed door
• Low current draw
• All units fitted with a manual release
button
• Anti-residual magnetism design
• Adjustable armature ensures correct
alignment with door
• Optional power supply available (max 7
retainers) (DRM24S)
• Tested and certified to BS EN1155
(DRM24S)
TECHNICAL SPECIFICATION
Input Voltage
Current Draw
24V DC
60 mA
240V AC
30 mA
Holding Force
55kg (120 lb)
55kg (120 lb)
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
SECURITY
27
O R D E R I N G D ATA
E N T RY A L E RT K I T S
Description
Units
EPRB/K
EPRB/S
PBK
PS312
Entry Alert Kit (reflective beam)
Additional Speaker Kit for EPRB/K
Entry Alert Kit
Plug-in Power Supply (Internal Use)
(2 required for PBK)
each
each
each
each
APPLICATIONS
Stand alone security kit, sounds when person crosses PIR beam path. Ideal for use in shops,
restaurants, offices, factories, warehouses etc.
• Battery (PP3 not supplied) or mains
operation (not supplied)
• Beam range 20m or 4m settings (to
save battery)
• 3 Sound options - alarm, chimes or off
• Volume control
• Internal
• Low battery indication
• Optional plug-in power supply
(PS312) Use on 9V tapping
(Internal use) - 2 required
(1 required for each photocell)
• Wide angle PIR operation
• Desk or wall mounting
PBK
EACH KIT CONTAINS
EPRB/K
EPRB/K - Reflected Beam Entry Alert Kit
1 Infrared Photocell
Reflector Unit
Chime/Siren Alert Unit
Power Supply
ADDITIONAL
SPEAKER KIT
PBK - Entry Alert Kit
• 1 x Transmitter
• 1 x Receiver
HEAR SOUND IN
MULTIPLE LOCATIONS
COMMUNICATIONS
•
•
•
•
LIGHTING
CONTROLS
• Reflected beam operation
• Only requires 1 photocell cabling
connection
• Mains transformers supplied
• Chime/siren operates when beam path
broken
• Beam length max 7m
• Speaker volume adjustable or turned off
• Siren time adjustable (3 to 30 secs)
• Internal use
• Easy to set up
• 10m plug-in wiring supplied (photocell
to chime/siren)
• Additional speaker extension kit(s)
available (10m lead) (EPRB/S)
(max 2 ext kits per beam)
UP TO 20M TRANSMITTER
RECEIVER RANGE
TV AMPLIFIERS
PBK FEATURES
WIRELESS
EPRB/S
WIRELESS ENTRY ALERT KIT
Description
IP55
Units
EPRB/WK Wireless Entry Alert Kit (reflective beam)
EPRB/S
Additional Speaker Kit for EPRB/WK
each
each
EPRB/WK FEATURES
• Additional wired (10m) speaker
extension kit(s) available (EPRB/S)
(max 2 ext kits per beam)
• Wireless range up to 100m (sensor to
speaker line of sight)
• Add up to 5 sensors per speaker
• Add unlimited number of speakers
(wireless)
EPRB/WK
WIRELESS
100M RANGE
CONTAINS
EPRB/S
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
EPRB/WK - Wireless Reflected Beam Entry Alert Kit
• 1 Infrared Photocell
• Chime/Siren Alert Unit
• Reflector Unit
• Power Supply (2 x plug in)
TEST EQUIPMENT
& TOOLS
• Reflected beam operation
• Mains transformers supplied
• Chime/siren operates when beam path
broken
• Beam length max 7m
• Speaker volume adjustable or turned off
• Siren time adjustable (3 to 30 secs)
• Internal/External (IP55) sensor
• Easy to set up
EACH KIT
CABLE
PROTECTION
APPLICATIONS
Stand alone security kit, sounds when person crosses PIR beam path. Ideal for use in
driveways/gardens, shops, restaurants, offices, factories, warehouses etc.
INDUSTRIAL
CONTROLS &
THERMOSTATS
O R D E R I N G D ATA
W I R E L E S S E N T RY A L E RT K I T S
Catalogue No.
TIME
CONTROLS
EPRB/K FEATURES
ALARMS IF SOMEONE
MOVES THROUGH
THE BEAM
DISABLED
Catalogue No.
SECURITY
ENTRY ALERT KITS
SECURITY
BEAM KITS
PHOTOCELL
BEAM KIT
P900/N
IDEAL FOR
SECURITY BARRIERS
LIGHTING
COUNTING
GATE CONTROL
O R D E R I N G D ATA
BEAM KITS
Catalogue No. Description
Units
P900/N
PRB/K
4PBK
WBS/1RC
WBSBB
WBSRC
each
each
each
each
each
each
Photocell Beam Kit
Reflective Photocell Beam Kit
Photocell Quad Beam Kit
Wireless Strobe Light/Siren
Battery Back-up for WBS/1RC
Remote for WBS/1RC (additional)
APPLICATIONS
Photocell Beam Kits - Stand alone safety or security kit for a wide range of applications e.g.
incorporated into intruder alarm, automatic gate openers or door entry systems. They detect
people or objects moving across its path.
TIME
CONTROLS
DISABLED
SECURITY
28
REFLECTOR
BEAM KIT
LIGHTING
CONTROLS
TV AMPLIFIERS
P900/N FEATURES
COMMUNICATIONS
IP66
WIRED
OR WIRELESS
APPLICATIONS
30m
RANGE
PHOTOBEAM
FENCE
4PBK
700mm TALL
WIRELESS
4BPK FEATURES
• Quad beam operation virtually
eliminates false alarms
• Provides an infrared photobeam fence
almost 700mm tall with a range of up
to 30 metres
• Wired or wireless operation
• Internal or external use
• Robust aluminium body
• Voltage free output relay contacts
• Wall/post mountable
• Rotatable beams
• 12V DC operation (plug in)
4BK KIT CONTAINS
• Pair of beams
• 2 x power supplies
• Wireless TX PCB
PRB/K FEATURES
• 12V AC -240V AC or
12V DC - 240V DC
• Only requires 1 photocell cabling
connection
• Reflected beam operation
• Beam length max 14 metres
• Internal/External use (IP66)
• Easy to set up, large 80mm diameter
reflector
• Photocell pre-wired – 2m cable
(extendable up to 100 metre)
• Adjustable sensitivity and response
• Voltage free changeover contacts
([email protected] AC) (3A @ 30V DC)
• Optional 12V AC/DC sounder (RT27)
- page 25
PRB/K EACH KIT CONTAINS
• 1 Infrared Photocell
• Reflector Unit
• Mounting Brackets/Fixing Kit
STROBE LIGHT/SIREN
WBS/1RC FEATURES
• Only for use with 4BPK when they are
installed for wireless operation
• Wireless operation
• 3 selectable operating modes; Strobe
light with alternating voice alarm and
siren, strobe light with siren, strobe
light with voice alarm
• Alarm duration setting of 5 or 10
minutes
• Remote control operation (supplied)
• Internal or external use (IP65)
• 12V DC operation
• Battery back-up (optional)
STROBE LIGHT/SIREN
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
12V (24V) operation
Beam length max 10m
Voltage free changeover contacts (1A/24V)
Easy to set up
Internal/External use
Optional 12V AC/DC sounder
P900/N EACH KIT CONTAINS
• 2 Infrared Photocells
• 12V AC Transformer
PRB/K
INDUSTRIAL
CONTROLS &
THERMOSTATS
CABLE
PROTECTION
•
•
•
•
•
•
WBS/1RC EACH KIT CONTAINS
WBS/1RC
• 12V DC power supply (plug in)
• Strobe/siren assembly
• Remote control
IP65
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
SECURITY
29
O R D E R I N G D ATA
EEA
EMERGENCY EQUIPMENT
Catalogue No.
Units
SECURITY
EMERGENCY EQUIPMENT - ALARMS AND CONTROLS
6200
Description
Green Emergency Door Release - Deformable plastic
Green Emergency Break Glass Door Release
Replacement Glass 75 x 40mm
with Vandal Resistant Protective Cover
RP/YS
Yellow Reset Call Point - (No Glass)
6531Y/RP/YS
Yellow Reset Call Point with Vandal Resistant
Protective Cover
VRC/GS/ESBG/S Green Reset Call Point with Vandal Resistant
Protective Cover
each
each
each
each
each
each
H (mm) W (mm) D (mm)
Units
6200
EEA
127 127
48
200mmDia x 65mm H
each
each
TIME
CONTROLS
Catalogue No. Description
Fire Extinguisher Alarm
Emergency Exit Alarm
DISABLED
EDRS/2
ESBG/S
ES/RG
APPLICATIONS
Ideal for use in public areas, shopping centres, factories, warehouses, prisons, detention centres etc.
COMMUNICATIONS
ESBG/S
EDRS/2
INDUSTRIAL
CONTROLS &
THERMOSTATS
6531Y/RP/YS
RP/YS
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
IDEAL FOR ENVIRONMENTS
WHERE BROKEN GLASS COULD BE
A HAZARD ie FOOD PRODUCTION
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
Resettable Emergency Door
Release (EDRS/2)
• Fitted with deformable plastic, no
glass to break
• Complies with risk assessment
RA001, EN50133 and industry Codes
of Practice
• Loud 80db warning (selectable)
buzzer plus red LED warning when
Emergency Door Release activated.
• Hinged clear flap to prevent
accidental operation
• Separate changeover contacts rated
[email protected]/DC
• 12/24V DC 20mA operation
• Simple key reset
• Surface or flush mounting (flush
box not supplied)
• Easy recognition, tough green
moulding
• Allen screw to aid vandal resistance
• Supplied with two reset keys and
one hex wrench
VRC/GS/ESBG/S
LIGHTING
CONTROLS
Exit Alarm (EEA)
• Self contained electronic door alarm
• Key override facility
• Highly visible stop sign discourages
wrongful use
• 75/95dB selectable output
• Tough polycarbonate construction
• Automatic alarm shut off after 30 sec
or 180 sec
• 12V DC or battery powered (PP3
supplied)
• Fits virtually any type of door
• Connect to building management
• Silent alarm (to external monitoring
point) option
Fire Extinguisher Alarm (6200)
• Highly visible stop sign discourages
wrongful use
• 95-98dB alarm when activated
• Tough polycarbonate construction
• 9V battery supplied
• Alarm connects to extinguisher via a
steel cable and seal (supplied)
• Deactivation cable provided to allow
for service by authorised personnel
TV AMPLIFIERS
Break Glass Door Release (ESBG/S)
• Test facility
• Can be surface or flush mounted
(surface box supplied)
• Replacement glass available
• Safe retention of broken glass
• Max. contact rating 3A
• Available with a vandal resistant
protective cover
• 2 x Normally Closed/Normally Open
circuits
• Cover and switch kits ideal for use
where accidental activations are likely
to occur i.e. schools, shopping centres
and other public areas
Reset Call Point (RP/YS)
• No Glass to break (uses deformable
plastic)
• Resettable after call - no need to
change glass
• Ideal for use in food environments,
swimming and leisure centres, gas
installations etc
• Simple key to reset (supplied)
• Normally open switch
• Surface or flush mountable (surface
box supplied)
• Visible warning of activation by flag
indicator
• Cover and switch kits ideal for use
where accidental activations are likely
to occur i.e. schools, shopping centres
and other public areas
(VRC/GS/ESBG/S and
6531Y/RP/YS)
SECURITY
SECURITY
30
PROTECTIVE EQUIPMENT VANDAL RESISTANT
O R D E R I N G D ATA
TIME
CONTROLS
DISABLED
VA N D A L R E S I S TA N T P R O T E C T I V E E Q U I P M E N T
H (mm) W (mm) D (mm)
Units
VRC/RS Red Cover for Surface Fire Call point
VRC/GS Green Cover for Surface Emergency
Break Glass Call Point
VRC/WS White Cover for Surface Call point
6531/Y Yellow Cover for Surface Reset Call point
9105
Thermostat/Controller Cover
190
118
67
each
190
190
210
127
118
118
137
140
67
67
78
76
each
each
each
each
APPLICATIONS
For the protection of equipment in public areas, shopping centres, factories, warehouses, prisons,
detention centres, etc.
VRC/GS
VRC/RS
Catalogue No.Description
FEATURES
LIGHTING
CONTROLS
TV AMPLIFIERS
Fire Call Point/Door Release Covers
• Tough clear polycarbonate, virtually
unbreakable
• Fits new or existing equipment
• Fits over flush or surface call
points/switch plates
• Depth 35mm (flush) or 67mm
(surface)
FEATURES
Thermostat Cover (9105)
• Tough clear polycarbonate, virtually
unbreakable
• Fits new or existing equipment
• Will not affect operation of thermostat.
Holes in frame allow air to circulate
freely
• Fitted with lock and 2 keys
6531/Y
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
VRC/WS
SUPER TOUGH
POLYCARBONATE
9105
SECURITY PRESSURE MAT KITS
O R D E R I N G D ATA
IDEAL FOR SHOP
ENTRANCE
SECURITY
S E C U R I T Y P R E S S U R E M AT K I T S
Catalogue No.
Description
Units
PMAT
SPMAT
RT27
T4812
Pressure Mat 720 x 390mm
Stair Pressure Mat 598 x 168mm
AC/DC Extension Sounder
Multivolt transformer
each
each
each
each
PMAT
APPLICATIONS
A simple security device that raises an alert when someone enters. Ideal for use in shops,
offices, factories, warehouses, hospitals, schools, nursing homes etc. When pressure is
applied to the mat e.g. stepped on, a chime or light is activated. The mat can be concealed
under a carpet, entrance mat or stair carpet.
TRIGGERED
BY WEIGHT
SPMAT
MAT PRODUCT SPECIFICATION
IDEAL FOR
STAIRS
Operational Voltage:
Contact Rating:
Tails:
Tamper Loop:
12-24V AC/DC
[email protected]
100mm
Normally closed
DIMENSIONS FOR PMAT
and SPMAT
PMAT
SPMAT
720 x 390mm
598 x 168mm
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
DISABLED
31
SECURITY
ELECTRIC DOOR OPENING / CLOSING SYSTEMS
O R D E R I N G D ATA
ELECTRIC DOOR OPENING/CLOSING KITS
Description
Units
ADO/KOI
ADO/S/N
EDL/DC
Door Opening/Closing Kit
Remote Control for ADO (spare)
Electric Door Lock 12V DC
each
each
each
ADO/KOI
A new encoder lets the ADO/KOI know the exact position of the door at all times
which eliminates the requirement for a door stop. Double doors can be simply managed
as being master/slave configuration, which will also control rebated doors.
As well as the simplicity to install and the high performance of the ADO/KOI, there
are numerous features which increase the flexibilty of the product.
FEATURES
• Heavy duty cycle
• Easy install & set up
• LCD display
• Programming via internal buttons or
transmitter
• Inward or outward opening
• Standby battery included
• Accessories available for special order
to help meet The Equality Act 2010
requirements
• We can offer an BS EN16005
version (includes radar and door
hinge covers) please contact for
more details.
FLOOR MATS
OPENING DETECTOR
CABLE
PROTECTION
SAFETY DETECTOR
INDUSTRIAL
CONTROLS &
THERMOSTATS
FOR INWARD/
OUTWARD
OPENING
DOORS
COMMUNICATIONS
• Push & Go / Pull & Go
• Fire alarm input
• Night / Day mode
• Free open, auto-close
• Speed, torque & velocity adjustment
• Disabled entry mode
• Electrolock pause timer
• Wind-stop torque adjustment
• Obstacle management
• Heavy duty cycle
• Easy install & set up
• LCD display
LIGHTING
CONTROLS
OPERATES WITH
A WIDE CHOICE
OF DEVICES
TV AMPLIFIERS
Suitable for light to heavy duty cycle applications
The new ADO/KOI has many features which will enhance the whole experience of
automating swing doors - from the LCD display to step-through installation and set up, to
the integral pad to programme the parameters (this can also be completed via a handheld transmitter.
TIME
CONTROLS
APPLICATIONS
Will automatically open and close swing doors using a variety of activating mechanisms,
e.g access control systems, PIR’s, photocells, push buttons etc. Ideal for use in offices,
shops, public buildings and factories. Ideally suited for use by the elderly and disabled
persons.
The new ADO/KOI offers a high quality, high performance product to automate single
and double swing doors.
DISABLED
Catalogue No.
PHOTOCELLS
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
REMOTE CONTROL
OPERATION
TEST EQUIPMENT
& TOOLS
PUSHBUTTON
PRODUCTS FOR THE DISABLED
DISABLED
SECURITY
32
DOOR RELEASE SWITCHES
O R D E R I N G D ATA
LARGE
115mm
DOOR RELEASE SWITCHES
DPDR/S
EASY TO
USE PUSH
ACTION
TIME
CONTROLS
Units
DPDR/N
DPDR/S
each
each
Disabled Persons Door Release Switch slimline
Disabled Persons Door Release Switch 115mm dia - surface
APPLICATIONS
Specifically designed for disabled persons use. For use with access control systems.
IP55 SUITABLE FOR
DPDR/N
Catalogue No. Description
EXTERIOR/INTERIOR USE
•
•
•
•
•
DPDR/N and DPDR/S FEATURES
Large easy to use push action
• Max. contact rating 2A @ 12/24V AC/DC
Brushed stainless steel front plate
(DPDR/N) 3A @ 24V (DPDR/S)
Vandal resistant
• Two sizes available
Tough surface mounting box (supplied) • DPDR/N - 112mm x 45mm
Internal or external use
• DPDR/S - 115mm diameter
O R D E R I N G D ATA
TV AMPLIFIERS
DOOR RELEASE SWITCHES
LIGHTING
CONTROLS
DPDRSP/S
DPDRP/S and DPDRSP/S FEATURES
Large easy to use push action
Brushed stainless steel front plate
Vandal resistant
Tough surface mounting box (supplied)
Internal use
Complies to BS8300
•
•
•
•
Max. contact rating 2A @ 12/24V AC/DC
Sizes available
DPDRP/S - 115mm diameter
DPDRSP/S - 85mm diameter
BRUSHED STAINLESS STEEL PRESS FOR ASSISTANCE SWITCH
FLUSH OR SURFACE
O R D E R I N G D ATA
BRUSHED STAINLESS STEEL PRESS FOR ASSISTANCE SWITCH
MOUNTING
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
each
each
•
•
•
•
•
•
EASY TO USE
PUSH ACTION
PFAS
RT27
Catalogue No.
Description
Units
PFAS
SMF
RT27
T4812/N
Press for Assistance Switch
Surface Mounting Frame - 1 gang
Sounder 12V AC/DC
Multivolt Transformer
each
each
each
each
APPLICATIONS
For use with a suitable sounder & power
supply in assisting with the requirements of
the 2010 Equality Act regarding
Accessibility for Disabled Persons.
•
•
•
•
•
FEATURES
Brushed stainless steel front plate
Vandal resistant
Flush or surface mounting (flush box supplied)
Easy to operate
Max. contact rating 2A @ 12/24V AC/DC
TOUCH FOR ASSISTANCE SWITCH
O R D E R I N G D ATA
EASY TO USE
T O U C H F O R A S S I S TA N C E S W I T C H
TOUCH
ACTION
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
Units
DPDRP/S Disabled Persons Door Release Switch 115mm dia - surface
DPDRSP/S Disabled Persons Door Release Switch 85mm dia - surface
DPDRP/S
LARGE 115mm
FUSES & GENERAL
PRODUCTS
Catalogue No. Description
TAS/K with SMF
Catalogue No.
TAS/K
SMF
RT27
RT27
•
•
•
•
•
•
Description
Touch for Assistance Kit
Surface Mounting Frame - 1 gang
Sounder 12V AC/DC
Units
each
each
each
EACH KIT CONTAINS
FEATURES
Touch sensitive
• Touch switch and flush mounting box
Flush or surface mounting (flush box supplied) • 12V DC power supply (can be used
Brushed stainless steel
with sounders - see page 25)
Internal or sheltered external use
• Max contact rating
Voltage free changeover contacts
2A @ 12/24V AC/DC
Will work behind glass
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
PRODUCTS FOR THE DISABLED
33
BATTERY BACKUP
OPTIONS
O R D E R I N G D ATA
DELUXE TOILET ALARM SYSTEM
Description
Units
DIS1/C4A
Toilet Alarm System
ACCESSORIES
each
Description
Units
DIS1/C4A/CS
DIS1/C4A/IND
DIS1/C4A/RP
DIS/RCPK
DIS1/C4A/BAT
DIS10/C4A/NP
DIS1/C4A/NM
Ceiling Pull Cord Switch
Indicator Light/Sounder
Reset Point/Sounder
Replacement Cord/Pull Kit
9V Rechargeable Battery
10 Zone Network Panel
Network Module
each
each
each
each
each
each
each
DIS1/C4A
COMPLIES
WITH BS8300
ONLY 2 CORES REQUIRED
THROUGHOUT
TV AMPLIFIERS
LIGHTING
CONTROLS
APPLICATIONS
Our range of disabled persons toilet alarms are a cost effective and reliable solution to calling
for assistance in the event of an emergency. Suitable for use in nursing homes, retirement
homes, commercial/public buildings and other areas. Integral relay as standard allows
integration of the alarm into intruder alarm, call systems etc and can switch external
components e.g. strobes, sounders, lights etc.
FEATURES
• Integral relay contacts for adding other
• 2 wire installation
devices, e.g. lights, sounders or add into
• Fits standard wall boxes for flush or
building management system (volt free)
surface fitting
1A max
• Adjustable sounder in over-door panel
• Delay on pull cord to minimise
• Battery backup options (9V)
false/accidental activation
Use with rechargeable, (DIS1/C4A/BAT)
• Reset button gives visual and audible
or an alkaline (connection supplied) or
indication on activation
without battery back-up
• Expandable - use single or group
• BS83000:2009 + A1:2010 compliant
together facility (max 10)
• Fault and Mains indicators
EACH KIT CONTAINS
TIME
CONTROLS
Catalogue No.
DISABLED
Catalogue No.
SECURITY
DELUXE TOILET ALARM SYSTEM (DIS1/C4A)
COMMUNICATIONS
DIS10/C4A/NP
• Alarm Controller/Power Supply • Indicator Light/Sounder (for staffed area)
• Reset Call Point/Sounder
• Disabled Toilet Door Stickers
• Ceiling Pull Cord Switch
• Additional switches/indicator lights etc, available
NETWORKING Note: 1 network panel (DIS10/C4A/NP) per system and a network
module (DIS1/C4A/NM) for each alarm panel required (max of10).
ACCESSORIES FOR DIS/1/N
Description
Units
DIS/CS/N
DIS/OL/N
DIS/RP/N
DIS/RCPK
DTA/RBK
Ceiling Pull Cord Switch
Overdoor Light/Sounder
Reset Point/Sounder
Replacement Cord/Pull Kit
Replacement Battery Kit (DIS1/N)
each
each
each
each
each
DIS/CS/N
DIS/RP/N
DIS/OL/N
CABLE
PROTECTION
HIGH VISIBILITY TOILET ALARM SYSTEMS (TWO WIRE)
O R D E R I N G D ATA
BRUSHED STAINLESS STEEL PUSH FOR ASSISTANCE SWITCH
Description
Units
DDA/CALL/N
DDA/CPT
DDA/PC
DDA/SLI
Disabled Toilet Kit (Call Point)
Call Point (Pulsing LED)
Pull Cord Switch (LED)
Substation Indicator
each
each
each
each
EACH KIT CONTAINS
•
•
•
•
•
•
Alarm Controller/Power Supply
Overdoor Light/Sounder
Call Point
Reset Call Point
Disabled Toilet Alarm Stickers
Pull Cord Switch
DESIGNED FOR THE
PARTIALLY
SIGHTED
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
APPLICATIONS
Specifically designed for the partially sighted.
A cost effective and reliable solution to calling
for assistance in the event of an emergency.
Suitable for use in nursing and retirement
homes, commercial/public buildings, hotels,
guest houses and other areas.
• Only 2 wire cable required throughout
• High intensity blue LEDs used
throughout (to aid location)
• High visibility printing on fascias
• Rechargeable battery facility
• Complies with BS 8300, Care Standards
Act (2002), English Tourism Councils:
National Accessability Scheme
• Additional accessories available to
enhance system
• Braille lettering incorporated on front
plates
TEST EQUIPMENT
& TOOLS
Catalogue No.
INDUSTRIAL
CONTROLS &
THERMOSTATS
Catalogue No.
PRODUCTS FOR THE DISABLED
34
SECURITY
INDUCTION LOOP AMPLIFIER SYSTEMS
FAST &
SIMPLE
TO USE
ET30EC
TIME
CONTROLS
DISABLED
SUITABLE FOR
INTERVIEW
ROOMS,
COUNTERS ETC.
IL-TEST
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
TV AMPLIFIERS
PLS
O R D E R I N G D ATA
O R D E R I N G D ATA
P O R TA B L E A M P L I F I E R
COUNTER/ROOM KITS
Catalogue No.
Description
Units
Catalogue No.
Description
Units
PLS
Portable Loop System
each
ET30EC
Counter Kit (Standard)
each
APPLICATIONS
Companies are required by the 2010 Equality Act, to provide Induction Loop Systems where
necessary. Induction Loop Systems are designed specifically to help hearing impaired people by
providing audio coverage directly into hearing aids fitted with Telecoil T switch position. Ideal for use
in shops, banks, post offices, restaurants, petrol stations, leisure centres, nursing homes etc.
PORTABLE SYSTEM FEATURES
• Stand alone self contained fully
operational unit with integral
microphone and induction coil
• 1.2m2 effective area
• External loop socket
• External microphone socket
• Mains rechargeable battery
operation
• Up to 4hrs battery back up in use
• Low battery warning light
• Complies with BS EN 60118-4
PRODUCT SPECIFICATION
•
•
•
•
•
•
•
•
•
Provides Audio coverage direct into hearing aids, fitted with Telecoil T switch position
Counter Kits cover a 1 to 2m dia.
Complies with BS 7594 and BS 5839/4 Standards
Wall mounted
Electret Microphone input provided, which can be used for TV or conferencing.
Tamper resistant “mix control”
Control adjustment from front panel
LED indicators for input signal and loop currents
Induction Loop sticker provided
EACH KIT CONTAINS
O R D E R I N G D ATA
UNIVERSAL TESTER
Catalogue No.
Description
Units
IL-TEST
Universal Induction Loop Tester
each
• Amplifier/Power Supply
• Induction Loop Counter Coil
• Mains lead with 13A plug
• Tie Clip /Counter microphone
• Induction loop sticker
The 2010 Equality Act requires that Induction Loop systems are regularly checked to ensure
correct operation. The tester allows the user/installer to check that the system is operating
correctly and adjust levels if required.
FEATURES
•
•
•
•
•
Indicates Induction loop is active and audible signal of field strength is present
LED indication of field strength level (3 LEDs)
Simple to use
Battery operated (2 x CR927 button cells supplied)
Gives approximately 1000 tests per set of batteries
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
TIME CONTROLS
35
O R D E R I N G D ATA
I M M E R S I O N H E AT E R A N D I N D U S T R I A L T I M E S W I T C H E S
Description
Units
IMM24
IMM24EC
IMM24F
16.1A - 24 hour - with Surface Mounting Box
16.1A - 24 hour - with Surface Mounting Box
13A - 24 hour - flush
each
each
each
IMM24
3500 W
IMMERSION
HEATER
TIMESWITCH
1200 VA
VA
2000 VA
VA
3000 W
1000 VA
VA
900 VA
VA
IMM24
200 VA
VA
IMM24/F
2500 W
1200 VA
VA
2000 VA
VA
2500 W
1000 VA
VA
900 VA
VA
IMM24F
200 VA
VA
16.1 AMP RESISTIVE
4 AMP INDUCTIVE
IMMM24/EC
3500 W
1200 VA
VA
2000 VA
VA
APPROVED
3000 W
1000 VA
VA
200 VA
VA
CABLE
PROTECTION
PLUG-IN TIMESWITCHES
O R D E R I N G D ATA
APT24
Catalogue No. Description
Units
APT24
each
Analogue 24 hour Plug-in Timeswitch
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
• Continuous (manual) operation facility
• Minimum 15 minute switching interval
• Red indicator light illuminates when
output is ON
• Fixed tappets
ANALOGUE
24HR ON/OFF SWITCHING,
15 MINUTE SWITCHING
INTERVALS
TEST EQUIPMENT
& TOOLS
APPLICATIONS
For use in homes, offices and shops etc for the programmed control of plug-in lighting,
heaters, fans, radios and coffee machines.
FEATURES
INDUSTRIAL
CONTROLS &
THERMOSTATS
900 VA
VA
IMM24EC
PLUG-IN TIMESWITCHES
COMMUNICATIONS
• Compact dimensions.
• Tappet “time” selectors. Fast,
easy fingertip control.
• No loose pins.
• 24 hour. Is the convenience of
repeating a cycle daily.
• ON/OFF slider switch. Fingertip
control.
LIGHTING
CONTROLS
FEATURES
IMMERSION
HEATER
TIMESWITCH
• 24 hour ON/OFF switching
• Up to 96 ON/OFF switching operations
per day
• Maximum load 3200W
TV AMPLIFIERS
13 AMP RESISTIVE
4 AMP INDUCTIVE
TIME
CONTROLS
IMM24F Is available for situations
where flush fitting is required.
Twenty-four hour models can be set from
30 minutes to 23.5 hours in 30 minute
increments, with the pre-set cycle being
repeated daily.
All above IMM models feature an indicator
light which confirms that the timeswitch is
passing a supply to the appliance.
IMM24 This model has been specifically
developed to cope with the constantly high Mains connection is straightforward with
all surface models providing knock-outs
amperage draw found with immersion
and cable clamps. Terminals, which can
heaters and also the wide variety of
domestic or industrial timed operations. The accommodate two 1.5mm conductors are
provided.
tappets are in 30 minute increments.
IMM24EC The latest design of high
current timeswitch incorporating a rotary
ON/CLOCK/OFF control offering permanent
ON or OFF or timed operation. This cost
effective compact timeswitch is ideal for use
with immersion heaters or other high
current domestic, commercial or industrial
applications. Tappets are in 30 minute
increments and IMM24EC is supplied with a
purpose designed surface mounting box.
IMM24 and IMM24EC are supplied with
surface mounting box containing 2 x cable
clamps.
16.1 AMP RESISTIVE
4 AMP INDUCTIVE
APPROVED
PRODUCT SPECIFICATION
With electrical and mechanical
componentry housed within an impact
resistant housing, these timeswitches
feature timer dials with easy to set tappets.
These activate switching at pre-set times. A
slider switch allows the unit to be set for
continuously ON/OFF in addition to the
program setting.
THE ORIGINAL & GENUINE
BEWARE OF IMITATIONS
DISABLED
Catalogue No.
SECURITY
IMMERSION HEATER/LIGHTING TIMESWITCHES
TIME CONTROLS
SECURITY
36
SOLAR TIMESWITCHES (WITH BLUETOOTH SETUP)
O R D E R I N G D ATA
SOLAR TIMESWITCHES
ASTRO NOVA CITY
Catalogue No.
TIME
CONTROLS
DISABLED
EASY SET-UP CITY
SELECTION FEATURE
AUTOMATICALLY SETS
FOR DAWN & DUSK
ASTRO NOV
NOVA
VA
A CIT
CITY
TY
TV AMPLIFIERS
3000 W
1200 VA
VA
ASTRO
NOVA CITY
SHOWN IN
ENC1
2000 VA
VA
3000 W
600 VA
VA
LIGHTING
CONTROLS
400 VA
VA
COMMUNICATIONS
Units
each
each
each
FEATURES
APPLICATIONS
BLUETOOTH DONGLE
90 VA
VA
TECHNICAL SPECIFICATION
Catalogue No.
Battery back-up Switch Operation Switching Capacity Power Supply
ASTRO NOVA CITY
10 years
22
Description
ASTRO NOVA CITY 7 Day/All Year 230V AC
ENC1
Enclosure
BLUETOOTH DONGLE Dongle
16(10) A
230V
Ideal for controlling lighting (security/signage • Operates as standard timeswitch with
etc) where control based around dusk and dawn or without dawn/dusk switching for
part night control
or part of the night is required.
The internal electronics track and automatically • Automatically adjusts for dawn/dusk
adjust for local dawn/dusk times throughout the variation (electronically) over the years
year(s) and with each day of the week being • Accurate dawn/dusk settings - set by
local city
individually programmable it gives accurate and
• Automatic summer/winter time correction
cost effective control throughout the year.
• Twin timer controlled circuits - voltage free
ENCLOSURE
• 2 modules wide
Enables the use of Orbis modular units to be • DIN rail mounting
used where it is impractical to build them into • 10 year battery life
• Volt free changeover contacts
panels/distribution units.
BLUETOOTH DONGLE APPLICATIONS
Communications Bluetooth Dongle for ASTRO NOVA CITY which allows for programming
and controlling the device from an Android or iPhone App.
FEATURES
The Bluetooth Dongle is used in combination with the ORBIS ASTRO NOVA application
(Apple and Android), being compatible with Bluetooth Smart ready devices.
• Apple (iphone 4S or above, iPad3 or above)
• Android (version 4.3 or above and devices compatible with Bluetooth 4.0 LE)
This application performs the following functions:
• Reading the data of an ASTRO NOVA CITY/DATA LOG 1-2 to store or send to
another device
• Creating different profiles (settings) from scratch or based on the data captured
ASTRO NOVA CITY/DATA LOG 1-2 .
• Sending one or several ASTRO NOVA CITY/DATA LOG 1-2 profiles
• Displaying operation statistics (monthly and annual switching times)
• Carrying out energy saving and billing estimation studies.
STAIRCASE LIGHTSWITCH - TIME LAG CONTROLLER
O R D E R I N G D ATA
S TA I R C A S E L I G H T S W I T C H T I M E L A G C O N T R O L L E R
INDUSTRIAL
CONTROLS &
THERMOSTATS
Catalogue No.
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
MICROTEMP
T-16G
T
-16G
T-22
T
-22
2000W
3000W
800VA
800V
VA
1200VA
1200V
VA
1200 V
VA
A
VA
2000 V
A
2000W
3000W
750VA
750V
VA
1000VA
1000V
VA
700VA
700V
VA
900VA
900V
VA
100VA
100V
VA
100VA
100V
VA
Description
Units
T16G
Staircase Lightswitch
each
T22
Staircase Lightswitch
each
MICROTEMP Staircase Lightswitch
each
ENC1
Enclosure
each
Other models and voltages can be supplied on request.
APPLICATIONS
An energy saving device used to turn off lighting after a preset delay in corridors and
staircases etc in hotels, apartment blocks, factories and warehouses.
T16/T22 SPECIFICATION
MICROTEMP SPECIFICATION
Small size (40x40x14mm)
• DIN rail mounted single module units
No neutral required
• Synchronous motor
Suitable for any push button switch
• Time delay setting 3-30 mins (T16G),
Use with Incandescent or Halogen lamps
45 secs - 7 mins (T22)
• Manual selector for permanent on and
automatic
• 10 Amp rating (T16G) - 16 Amp rating
(T22)
• Voltfree contacts
T16G
T E C H N I C A L S P E C I F I C AT I O N
T22
Catalogue No.
T16G
T22
MICROTEMP
Time
Switching Capacity
Power Supply
3 - 30 minutes
45 sec - 7 minutes
30 sec - 10 minutes
10(2.5)A
16A
400W
230V
230V
230V
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
TIME CONTROLS
37
SECURITY
DIGITAL TIMESWITCHES
O R D E R I N G D ATA
D I G I TA L T I M E S W I T C H E S
Description
Units
DATA LOG/1
DATA LOG/2
DATA MICRO/PLUS
DATA MICRO/2
DATA MICRO/2/12
MINI T LOG
ENC1
BLUETOOTH DONGLE
16A - 24 Hour/7 Day
16A - 24 Hour/7 Day
16A - 24 Hour/7 Day
16A - 24 Hour/7 Day
16A - 24 Hour/7 Day
16A - 24 Hour/7 Day
Enclosure
Dongle
each
each
each
each
each
each
each
each
4 YEAR
BATTERY
BACK-UP
DISABLED
Catalogue No.
Other models and voltages can be supplied on request.
TIME
CONTROLS
APPLICATIONS
The sizes of these timeswitches are suitable for most consumer units and ideal for use by
panel builders. Suitable for multiple functions linked to accuracy.
DATA LOG & MINI T LOG P R O D U C T S P E C I F I C AT I O N
Offer 1 or 2 circuit switching
• Volt free changeover contacts
• Timed pulse 1-59 secs
In-built battery
• Surface or DIN rail mountable (MINI T
Innovative and simple programming
24 Hr/Day, with holiday period override LOG)
• Bluetooth Dongle compatible (DATA
Automatic BST/GMT time correction
LOG 1-2). See page 36
Large display (DATA LOG)
DATA MICRO/PLUS
TV AMPLIFIERS
•
•
•
•
•
•
BLUETOOTH DONGLE APPLICATIONS
Communications Bluetooth Dongle for ASTRO NOVA CITY which allows for programming
and controlling the device from an Android or iPhone App.
LIGHTING
CONTROLS
T E C H N I C A L S P E C I F I C AT I O N
Circuits Switching operations Battery back-up Switching capacity Power supply
DATA LOG/1-2
MINI T LOG
1 or 2
1
50
50
5 years
5 years
16(10)A
16(4)A
230V
230V
DATA MICRO RANGE are two module DIN rail or surface mounting digital timeswitches
(for surface mounting use Enclosure).
• Manual switching.
• Volt free changeover contacts
• Timed pulse 1-59 secs
• Single or twin circuit
• Up to 24 operations
• Daily and weekly programme
Catalogue No.
‘TIMED PULSE TOR SCHOOL BELLS etc’
INDUSTRIAL
CONTROLS &
THERMOSTATS
T E C H N I C A L S P E C I F I C AT I O N
BLUETOOTH DONGLE
Circuits Memory Parts Battery back-up Switching Capacity Power Supply
DATA MICRO/PLUS 1
DATA MICRO/2
2
DATA MICRO/2/12 2
32
32
32
4 years
4 years
4 years
230V
230V
12V AC/DC
DATA
MINI T
CABLE
PROTECTION
DATA
16(10)A
16(10)A
16(10)A
DA
TA MICRO+
MICRO+DA
DATA
LOG
TALOG
LOG MINI T LOG
DATA
3000 W
3000 W
Fluorescent tubes
1200 VA
VA
1200 V
VA
A
1200V
VA
1200VA
Low voltage halogen
(12V AC)
2000 VA
VA
2000 V
VA
A
2000 VA
VA
Halogen (230V AC)
3000 W
3000 W
3000 W
600 V
VA
A
600 VA
VA
1000V
VA
1000VA
400 V
VA
A
400 VA
VA
900V
VA
900VA
90 V
VA
A
90 V
VA
A
200V
VA
200VA
Low consumption
lamps (CFL)
Low consumption
lamps (Downlights)
LED lamps
MINI T LOG
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
3000 W
TEST EQUIPMENT
& TOOLS
Incandescent lamps
COMMUNICATIONS
DATA LOG
DATA MICRO PRODUCT SPECIFICATION
TIME CONTROLS
ANALOGUE TIMESWITCHES
O R D E R I N G D ATA
MODULAR TIMESWITCHES - DIN RAIL
DISABLED
SECURITY
38
Catalogue No.
Description
UNO/D
UNO/QRD
INCA/DUO/D
INCA/DUO/QRD
ENC1
16A - 24 Hour
16A - 24 Hour/Battery back-up
16A - 24 Hour
16A - 24 Hour/Battery back-up
Enclosure
nits
each
each
each
each
each
Other models and voltages can be supplied on request.
APPLICATIONS
The sizes of these timeswitches are suitable for most consumer units and ideal for use by panel builders.
TIME
CONTROLS
UNO RANGE
UNO
INCA
2500 W
TV AMPLIFIERS
1200 VA
VA
2000 VA
VA
2500 W
1000 VA
VA
900 VA
VA
3000 W
1200 VA
VA
2000 VA
VA
TECHNICAL SPECIFICATION
3000 W
Catalogue No.
1000 VA
VA
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
Switch Operation Module Width Battery back-up Switching Capacity Power Supply
UNO/D
UNO/QRD
INCA/DUO/D
INCA/DUO/QRD
900 VA
VA
100 VA
VA
96 on/off
96 on/off
48 on/off
48 on/off
1
1
2
2
No
150Hrs
No
100Hrs
16(4)A
16(4)A
16(4)A
16(4)A
230V
230V
230V
230V
ENERGY MEASUREMENT METERS
ACCURATELY MEASURES
ELECTRICITY CONSUMPTION
O R D E R I N G D ATA
ANALOGUE ENERGY METERS
Catalogue No. Description
Units
2511SO
6511SO
ENC1
each
each
each
25A Energy Meter
65A Energy Meter
Surface Mounting Enclosure
APPLICATIONS
Allows simple sub-metering of a wide variety of applications, to measure electricity
consumption and create energy usage awareness. Ideal for use on camp sites, caravan and
mobile home parks, student flats, house conversions and temporary installations and a wide
range of industrial applications.
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
100 VA
VA
INCA RANGE
PRODUCT SPECIFICATION
Models have volt free contacts
INCA/DUO/D (24 hour) &
UNO/D (24 hour) & UNO/QRD
INCA/DUO/QRD (24 hour) are two
(24 hour) are single module wide 96
module wide 48 operations, fixed tappets,
operations, fixed tappets, manual
transparent cover, DIN rail or surface
override, three positions (permanent,
mounting. (For surface mounting use
ON/OFF and automatic) sealable
enclosure).
transparent cover. Easily removable
battery. DIN rail or surface mounting.
(For surface mounting use enclosure).
ANALOGUE FEATURES
•
•
•
•
25A
65A
25A
32A
65A
2511SO
6511SO
D2221
D3221
D6521
Catalogue No.
Power supply
Current rating
Modular width
Temp range
TECHNICAL SPECIFICATION
2511SO
6511SO
D2221
D3221
230V AC 50Hz 230V AC 50Hz 230V AC
230V AC
25 Amps
65 Amps
10(22.5)A
5(32)A
1 module
2 modules
2 modules
2 modules
-200C to +500C -200C to +500C -200C to +500C -200C to +500C
D6521
230V AC
10(65)A
2 modules
-200C to +500C
Accurate Kilowatt hour measurement
25 and 65 Amp ratings
Modular construction
Accuracy Class 1 (UNE-EN62053-21)
• DIN rail or surface mounting in
separate enclosures (ENC1)
• 5 digit + 1 decimal point numerical KWh
indication
O R D E R I N G D ATA
D I G I TA L E N E R G Y M E T E R S
Catalogue No. Description
Units
D2221
D3221
D6521
ENC1
each
each
each
each
22A Digital Energy Meter
32A Digital Energy Meter
65A Digital Energy Meter
Surface Mounting Enclosure
DIGITAL FEATURES
IDEAL FOR USE ON CAMP SITES, IN STUDENT
ACCOMODATION, FLAT CONVERSIONS ETC.
• Backlit LCD display
• 6 digital display +1 decimal point
digital KWA indication
• Partial reset to 0 (D2221 only) facility
(tripmeter)
• Accuracy class 2 EN 62053-21 (D2221)
• Accuracy class 1 EN 62053-31 (D3221
and D6521)
• LED consumption meter indication
• Power indicator (D2221)
• Min operating load 0.25A (D2221 and
D3221) 0.5A (D6521)
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
TIME CONTROLS
39
SECURITY
COMMERCIAL TIMESWITCHES
O R D E R I N G D ATA
COMMERCIAL TIMESWITCH
Catalogue No.
Description
Units
DUO/N
16A - 24 Hour Commercial Timeswitch
each
COMMERCIAL TIMESWITCHES
Description
Units
ALPHA/D
ALPHA/QRD
ALPHA/S
ALPHA/QRS
ALPHA/QRD/1
ALPHA/QRS/1
ALPHA/QRD/12VAC
ALPHA/QRD/12VDC
ALPHA/QRS/24VAC
ALPHA/QRD/24VAC
16A - 24 Hour (230V AC)
16A - 24 Hour/Battery back-up (230V AC)
16A - 7 Day (230V AC)
16A - 7 Day/Battery back-up (230V AC)
16A - 24 Hour/Battery back-up (120V AC)
16A - 7 Day/Battery back-up (120V AC)
16A - 24 Hour/Battery back-up (12V AC)
16A - 24 Hour/Battery back-up (12V DC)
16A - 7 Day/Battery back-up (24V AC)
16A - 24 Hour/Battery back-up (24VAC)
each
each
each
each
each
each
each
each
each
each
CONTROL FOR
COMMERCIAL
PREMISES
DUO/N
Other models and voltages can be supplied on request.
•
•
•
•
•
•
• Surface or DIN mounting
Surface, panel or DIN mounting
• 1⁄4 hour switching intervals
⁄2 hour switching intervals (D & QRD)
• Security sealable
2 hour switching intervals (S & QRS)
• 16A resistive 4A inductive
Fixed tappets
• Voltage free changeover contacts
Voltage free changeover contacts
Auto or manual ON/OFF operation
TECHNICAL SPECIFICATION
1
Switch Operation Module WidthBattery back-up Switching Capacity Power Supply
DUO/N
96 ON/OFF
Catalogue No.
Switch Operation Size (mm) Battery back-up Switching Capacity Power Supply
68 x 68
68 x 68
68 x 68
68 x 68
72 x 96
72 x 96
72 x 96
72 x 96
72 x 96
72 x 96
No
100Hrs
No
100Hrs
100Hrs
100Hrs
100Hrs
100Hrs
100Hrs
100Hrs
16(4)A
16(4)A
16(4)A
16(4)A
16(4)A
16(4)A
16(4)A
16(4)A
16(4)A
16(4)A
16(4)A
ALPHA RANGE
230V
230V
230V
230V
230V
120V AC
120V AC
12V AC
12V DC
24V AC
24V AC
3000 W
1200 VA
VA
1200 VA
VA
2000 VA
VA
2000 VA
VA
2000 W
3000 W
900 VA
VA
1000 VA
VA
900 VA
VA
900 VA
VA
100 VA
VA
200 VA
VA
COMMUNICATIONS
ALPHA/D
96 ON/OFF
ALPHA/QRD
96 ON/OFF
ALPHA/S
84 ON/OFF
ALPHA/QRS
84 ON/OFF
ALPHA/QRD/1
96 ON/OFF
ALPHA/QRS/1
84 ON/OFF
ALPHA/QRD/12VAC 96 ON/OFF
ALPHA/QRD/12VDC 96 ON/OFF
ALPHA/QRS/24VAC 84 ON/OFF
ALPHA/QRD/24VAC 96 ON/OFF
100Hrs
2000 W
SUPRA RANGE
nits
each
each
each
each
each
APPLICATIONS
The sizes of these timeswitches are suitable for most consumer units and ideal for use by panel builders.
PRODUCT SPECIFICATION
automatic on/off. DIN rail mounting.
Easily removed battery.
CRONO/QRDD
Two separate circuits.
DIN rail or surface mounting 24 hr timer
TECHNICAL SPECIFICATION
Catalogue No.
Switch Operation Module Width Battery back-up Switching Capacity Power Supply
2.5
2.5
2.5
4
No
150Hrs
150Hrs
100Hrs
16(4)A
16(4)A
16(4)A
2x16(4)A
230V
230V
230V
230V
3000 W
3000 W
500VA
500V
VA
1200 VA
VA
2250 VA
VA
2000 VA
VA
3000 W
3000 W
500VA
500V
VA
1000 VA
VA
-
900 VA
VA
-
200 VA
VA
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
SUPRA/D
96 on/off
SUPRA/QRD
96 on/off
SUPRA/QRS
96 on/off
CRONO/QRDD 96/48 on/off
CRONO/QRDD
SUPRA
TEST EQUIPMENT
& TOOLS
SUPRA/D (24 hour) SUPRA/QRD
(24 hour) SUPRA/QRS (weekly).
Have forward facing dials, manual knob
for time setting, manual override 3
positions: Permanent on, permanent off,
CRONO
CABLE
PROTECTION
Description
SUPRA/D
16A - 24 Hour
SUPRA/QRD
16A - 24 Hour/Battery back-up
SUPRA/QRS
16A - Weekly/Battery back-up
CRONO/QRDD 2x16A - 24 Hour/battery back-up
ENC1
Enclosure
Other models and voltages can be supplied on request.
INDUSTRIAL
CONTROLS &
THERMOSTATS
O R D E R I N G D ATA
MODULAR TIMESWITCHES - DIN RAIL
Catalogue No.
LIGHTING
CONTROLS
Catalogue No.
3
DUO / N (MINI)
ALPHA
TV AMPLIFIERS
DUO/N FEATURES
ALPHA FEATURES
IDEAL FOR
TRADESMANS
TIMING
TIME
CONTROLS
Catalogue No.
DISABLED
O R D E R I N G D ATA
SAFE AND
SECURE
SECURITY
40
TIME CONTROLS
RADIO CONTROLLED COMMERCIAL CLOCKS
O R D E R I N G D ATA
DISABLED
RADIO CONTROLLED COMMERCIAL CLOCKS
Catalogue No.
Description
Surround Colour
Units
CO10/AL/RC
CO10/AL/RCM
CO100W/RC
CO125W/RCM
250mm 12hr Dia R-Controlled
225mm 12/24hr Dia R-Controlled
260mm 24hr Dia R-Controlled
300mm 24hr Dia R-Controlled
Brushed Metal
Brushed Metal
White
White Metal Case
each
each
each
each
LIGHTING
CONTROLS
TV AMPLIFIERS
TIME
CONTROLS
FEATURES
CO10/AL/RC
(250mm)
CO100W/RC
(260mm)
• Radio-controlled versions for increased
accuracy and automatic summer/
wintertime setting. Accurate to one
second in a million by receiving the
precise time signal from Cumbria.
• Clear display
• Sweep second hand
• Battery Operated
(1 x AA, not supplied)
• ACCTIM models, your assurance of
quality and reliability
CO125W/RCM
(300mm)
CO10/AL/RCM
(225mm)
COMMERCIAL CLOCKS
O R D E R I N G D ATA
COMMUNICATIONS
COMMERCIAL CLOCKS
Description
Surround Colour
Units
C09W/N
CO10/WN
CO12W/N
CO12B/N
CO145W/N
225mm 24hr Dia Quartz
225mm 24hr Dia Quartz
300mm 24hr Dia Quartz
300mm 24hr Dia Quartz
355mm 24hr Dia Quartz
White
White
White
Black
White
each
each
each
each
each
FEATURES
• Battery operated
(1 x AA, not supplied)
• ACCTIM models, your assurance
of quality and reliability
• Sweep second hand
• Clear display
• Quartz movement
CO12W/N
(300mm)
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
CO9W/N
(225mm)
Catalogue No.
CO145W/N
(355mm)
CO12B/N
(300mm)
CO10/WN
(300mm)
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
AMPLIFIERS / DISTRIBUTION
41
SECURITY
DISTRIBUTION AMPLIFIERS (WIDE BAND)
O R D E R I N G D ATA
D I G I TA L T V D I S T R I B U T I O N A M P L I F I E R S ( W I D E B A N D )
Description
Units
1 in 2 out
1 in 4 out
each
each
EYE/D
EBP/D
A C C E S S O R I E S F O R D I G I TA L S Y S T E M S
Digieye Remote Control Sender
Bypass Kit Required for SIG2 and 4 with EYE/D
DISABLED
Catalogue No.
SIG2
SIG4
each
each
DISTRIBUTE
TIME
CONTROLS
DIGITAL TV
AROUND
DIFFERENT
ROOMS
SIG4
• Simple to install
• Suitable for distribution of signals for
digital TV, satellite TV, terrestrial TV and
FM radio.
LIGHTING
CONTROLS
REMOTE CONTROL
SIGNAL SENDER
FEATURES
TV AMPLIFIERS
APPLICATIONS
The SIG range of distribution amplifiers allow EYE/D Enables you to remotely operate
you to distribute TV or radio signals around a your digital satellite receiver from 1 or more
building. They are compatible with aerials or auxiliary points around your home etc. by
sending signals down the co-axial cable back
the RF OUT 2 signals found on UK digital
to
the RF-OUT 2 on your satellite receiver box
satellite receivers.
i.e. changes channel. It is fully compatible
It is also possible to control the functions of with UK digital satellite receivers featuring an
the satellite receiver from secondary locations RF-OUT 2 output
by using the receivers remote control and a *Note: Remote controls must
operate within
Digieye (EYE/D).
30-40KHz range.
Note: Bypass kit EBP/D is required on SIG 2 and
4 if using on EYE/D.
SIG2
TECHNICAL SPECIFICATION
SIG2
SIG4
Average gain
per outlet
Wideband UHF, VHF, FM
Wideband UHF, VHF, FM
COMMUNICATIONS
Catalogue Frequency
Number.
16dB
16dB
EYE/D
Voltage 230V AC 50Hz
INDUSTRIAL
CONTROLS &
THERMOSTATS
CAT 5E PATCH PANELS
O R D E R I N G D ATA
C AT 5 E P AT C H P A N E L S
Description
Units
PP24
PP48
1 in 2 out
1 in 4 out
each
each
Catalogue No.
Description
Units
IDC/M
IDC Metal Insertion Tool
each
CABLE
PROTECTION
Catalogue No.
ACCESSORIES
FEATURES
SEE CAT5E CABLES
ON PAGE 44
Cat 5e performance
Fits industry standard 19” equipment cabinets and racks
Labelling windows for easy port identification
Arrow style cable management (removable) for tidy routing and dressing of cables
Can be used with LSA and 110 punch tool
IDC/M
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
•
•
•
•
•
TEST EQUIPMENT
& TOOLS
APPLICATIONS
For use in standard 19” equipment cabinets and racks in offices, factories etc
AMPLIFIERS/DISTRIBUTION
SECURITY
42
DISTRIBUTION SYSTEMS
AER/UHF/N
DISABLED
RECEIVES ALL
TV SIGNALS
10
ELEMENTS
TIME
CONTROLS
LOFT/4
THE ULTIMATE
TV AMPLIFIERS
IN VIEWING DISTRIBUTION
32
ELEMENTS
LOFT/8
LIGHTING
CONTROLS
AER/UHF/32
TYPICAL INSTALLATION
O R D E R I N G D ATA
COMMUNICATIONS
D I G I TA L T V D I S T R I B U T I O N S Y S T E M S
Catalogue No.
Description
Units
LOFT/4
LOFT/8
CFP1
EYE/D
4 Way Control Box
8 Way Control Box
F Type Co-Axial Plug RG6
Digieye Remote Control Sender
each
each
(10) pack
each
APPLICATIONS
INDUSTRIAL
CONTROLS &
THERMOSTATS
A fully integrated TV, Video, Satellite, Radio and CCTV distribution system. Ideal for use in
domestic, commercial and industrial installations such as guest houses, hotels, nursing
homes, blocks of flats etc. System is approved for use with Sky systems.
LOFTBOX (Master Control Box/Amplifier) Combines up to 6 inputs (SATELLITE, UHF, and
DIGITAL TV, FM, DAB and CCTV) into one single downlead output per TV. Accepts a return
feed from TV/Sky digibox (UHF2). 4 and 8 output models available (6dB gain for each TV).
Note: TV Modulator required for each camera.
CABLE
PROTECTION
EYE/D
Enables you to remotely operate your digital satellite receiver from 1 or more auxiliary points
around your home etc. by sending signals down the co-axial cable back to the RF-OUT 2 on
your satellite receiver box i.e. changes channel. It is fully compatible with UK digital satellite
receivers featuring an RF-OUT 2 output.
*Note: Remote controls must operate within 30-40KHz range.
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
AERIAL KITS
FEATURES
PRODUCT SPECIFICATION
• Choice of 2 aerials for either
strong or medium strength signal
areas
• Suitable for receiving Freeview
and other digital signals
• Kits complete with 10 metres of
co-axial cable
AER/UHF/32 - 32 element aerial kit
AER/UHF/N - 10 element aerial kit,
The aerial kits contain all the components
required including aerial, mounting arm, heavy
duty mounting bracket, 10 metres of screened
co-axial cable, co-axial plug and cable clips.
Suitable for loft or wall mounting (mounting kit
supplied).
O R D E R I N G D ATA
A E R I A L K I T S F O R D I G I TA L T V R E C E P T I O N
Catalogue No.
Description
Units
AER/UHF/N
AER/UHF/32
10 Element Aerial Kit
32 Element Aerial Kit
each
each
TERRESTRIAL APPLICATIONS
Residential locations where television reception is desired
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
AMPLIFIERS / DISTRIBUTION
43
SECURITY
TV & DATA DISTRIBUTION SYSTEMS & CO-AXIAL ACCESSORIES
FAS3/SH
CFP1
DISABLED
MFP
FAS2/2CF
IDC/M
MOD/BT MOD/UHF
LIGHTING
CONTROLS
O R D E R I N G D ATA
TV AMPLIFIERS
MOD/RJ45
YS2
FAS2/CF
LJ2 SERIES
O R D E R I N G D ATA
PLUGS - SOCKETS - F TYPE CONNECTORS
Male and Female Plugs, Line Connectors.
D I G I TA L T V D I S T R I B U T I O N S Y S T E M S
Description
Units
Units
FAS3/SH
each
each
each
Shielded Triple Co-axial Socket
ACCESSORIES
each
MCP
MFP
CFP1
Catalogue No.
Description
Units
MOD/BT
MOD/UHF
MOD/RJ45
BT Socket (FAS3/SH)
UHF Socket (FAS3/SH)
RJ45 Socket (FAS/SH)
each
each
each
MOD/BT and MOD/RJ45 are terminated via a pinch down tool, IDC/M or similar.
O R D E R I N G D ATA
AERIAL SPLITTERS
Description
Units
YS2
1 In, 2 Out.
each
O R D E R I N G D ATA
T E L E P H O N E A N D D ATA S O C K E T S
O R D E R I N G D ATA
CO-AXIAL SOCKETS - FLUSH - SURFACE
The range of white plastic Co-Ax Sockets has screw terminals. Flush socket plates are available
with either Co-axial or F type sockets and are designed to fit standard electrical back boxes.
Description
Units
FAS2/CF
FAS2/2CF
Twin 1 x F Type & 1 x Co-axial socket.
Twin F Type socket
each
each
Size (mm)
Units
LJ2/4A
LJ2/6A
Single Surface Master Screw
Single Surface Extension Screw
68 x 68
68 x 68
each
each
Catalogue No.
Description
Units
IDC/M
IDC Metal Insertion Tool
each
TELEPHONE ACCESSORIES
Telephone sockets are approved to a British Telecom design to present a common interface for
telephone instruments and other subscriber apparatus incorporating 4 or 6 way line plugs.
Wiring connections are via screw terminals.
This is an ideal wall plate for Sky or Sky+ installations.
TEST EQUIPMENT
& TOOLS
APPLICATIONS
This shielded Co-axial socket can be used with the loftbox TV distribution system or on its
own. FAS3/SH allows the installer to customise the installation using the MOD modules.
FAS3/SH Shielded TV, FM, SAT-OUT & RF-OUT 2 socket plate is supplied with a
telephone socket and blanking plate. They can be replaced with either a further telephone
socket (MOD/BT), an RJ45 socket (MOD/RJ45) or a UHF socket (MOD/UHF).
Description
CABLE
PROTECTION
Catalogue No.
Catalogue No.
INDUSTRIAL
CONTROLS &
THERMOSTATS
Catalogue No.
COMMUNICATIONS
Catalogue No.
Catalogue No. Description
Chrome.
Co-axial Female Plug
F Type Co-axial Plug RG6
TIME
CONTROLS
CREATE YOUR OWN TV
DISTIBUTION SYSTEM
WITH THESE MODULAR
ACCESSORIES
MCP
The FAS3/SH requires a 2 gang box.
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
All of the above co-axial sockets are compatible for use with EYE/D digital signal sender
when part of a satellite box system with RF-OUT 2 (Sky/Sky+) see page 41-42.
SECURITY
44
AMPLIFIERS/DISTRIBUTION
WALLPLATES WITH CABLE ENTRY
O R D E R I N G D ATA
DISABLED
WA L L P L AT E S W I T H C A B L E E N T RY
Description
Units
WPBB50
WPBB50/BK
WPWB50
WPBB100
Single Wallplate with cable entry - white/black
Single Wallplate with cable entry - black/black
Single Wallplate with cable entry - white/white
Double Wallplate with cable entry - white/black
Double Wallplate with cable entry - black/black
Double Wallplate with cable entry - white/white
Single Surface Wall Box - 41mm deep
Double Surface Wall Box - 47mm deep
each
each
each
each
each
each
each
each
WPBB100/BK
WPWB100
PATBOX41
PATBOX47
APPLICATIONS
Decorative wall plates for use with cable management through a wall.
FEATURES
WPBB50/BK
•
•
•
•
TV AMPLIFIERS
TIME
CONTROLS
WPBB50
Catalogue No.
LIGHTING
CONTROLS
WPWB50
Available in single or double plate size (brush size 50 x 50mm and 50 x 100mm)
Available in a selection of colours
Able to accept a SCART plug through the brush, even on the single plate
Can be flush or surface mounted using standard wall box (not supplied) or simply to
cover a hole in the wall (wall plugs/screws not supplied)
• Ideal for routing pre terminated leads to/from Audio/Visual devices e.g. TV, Stereo,
set-top box, recorders, computers
Pattress boxes available in both single and double plate. Double plate is 47mm deep and
includes cable clamps. Single plate is 41mm deep.
NOTE: cables not included
PATBOX41
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
PATBOX47
WPWB100
WPBB100
CAT 5E CABLES
O R D E R I N G D ATA
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
WPBB100/BK
AERIAL SPLITTERS
CAT 5E CABLE
Catalogue No.
Description
Units
CAT5E/05W
CAT5E/1W
CAT5E/2W
CAT5E/3W
CAT5E/5W
CAT5E/10W
CAT5E/15W
CAT5E/20W
CAT5E patch lead, white 0.5m
CAT5E patch lead, white 1m
CAT5E patch lead, white 2m
CAT5E patch lead, white 3m
CAT5E patch lead, white 5m
CAT5E patch lead, white 10m
CAT5E patch lead, white 15m
CAT5E patch lead, white 20m
each
each
each
each
each
each
each
each
APPLICATIONS
High quality RJ45 ethernet cable for connecting your LAN equipped devices (e.g. VDSS range
of Door Entry system, PC, Laptop, PS3/4, Xbox 360/One, BluRay Player) to your network
or router.
With moulded plugs for long lasting design these cables are perfect for your home or office.
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
LIGHTING CONTROLS
45
O R D E R I N G D ATA
IP55
PROFESSIONAL PIR MOTION DETECTOR (10A)
Catalogue No.
Description
Units
ISIMAT+
Motion Sensor
each
SECURITY
PIR MOTION DETECTORS
ALPHA
1200 VA
VA
2000 VA
VA
2000 W
900 VA
VA
100 VA
VA
ISIMAT+
Catalogue No.
Description
Units
ECOMAT
Ultasound Detector
each
ALPHA
APPLICATIONS
Ultrasound detection, high performance detects even slight movements and can be
inconspicuously installed in a wide range of applications
ECOMAT FEATURES
•
surface installation, it can be mounted
on a flat wall, ceiling or also on inner
or outer corners by means of the
accessory included
Zero-crossing relay for a better
switching of LED-type loads,
fluorescent or low energy lighting
Adjustable parameters detection area,
timing and light sensitivity
Mounts onto walls, ceilings and both
concealed or surface, internal or
external corners using the brackets
supplied.
Adjustable 3 sec-30 min
Adjustable lux 5 - 2000
Adjustable range 0.5m - 12m
Ceiling 6m diameter @ 2.5m height
(360º)
Walls 12m frontal and 6m lateral @
2.5m height (270º)
O R D E R I N G D ATA
PIR MOTION DETECTOR (14A) 360º
Description
Units
PRO/P360
360˚ PIR Detector (white)
each
APPLICATIONS
Switches on lighting loads or other signalling devices automatically by detecting movement.
Ideal for use in car parks, driveways, porches, patios and building entrances in domestic,
commercial and industrial installations.
100 VA
VA
ECOMAT
PLUG-IN TERMINAL
BLOCK
FOR EASY
CONNECTION
IP45
PRO/P360
ALL ROUND
360°
DETECTION
FEATURES
High switching capacity (14 Amps)
90º Adjustable pivoted head
Wall, ceiling or corner mounted
Plug-in terminal block for easy
connection
• Corner bracket supplied
•
•
•
•
2 DETECTION ZONES ENSURE NO DEAD ZONE
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
230V AC 50Hz
14A (resistive)
3000W
2300W
600W
300W
6 secs - 12 mins
IP45
900 VA
VA
TEST EQUIPMENT
& TOOLS
TECHNICAL SPECIFICATION
Voltage:
Max Load:
Incandescent:
Halogen:
Fluorescent:
Energy Saving Lamps:
Operation Time:
IP Rating:
900 VA
VA
CABLE
PROTECTION
Catalogue No.
2000 W
INDUSTRIAL
CONTROLS &
THERMOSTATS
•
•
•
•
2000 VA
VA
COMMUNICATIONS
•
1200 VA
VA
LIGHTING
CONTROLS
•
2000 W
TV AMPLIFIERS
PROFESSIONAL PIR MOTION DETECTOR (6A)
•
TIME
CONTROLS
900 VA
VA
O R D E R I N G D ATA
• Can detect through non-metallic
surfaces and can be inconspicuously
installed in either plaster or cork
ceilings. It can also detect through
plastic, wood or brick. This feature
allows the device to detect while
remaining out of sight, which is ideal
from an aesthetic and safety point of
view in hotels, offices, meeting rooms,
etc
• Detection does not depend on ambient
temperature, therefore it maintains
accuracy in hot or humid environments
such as kitchens or showers
• ECOMAT detects emitted wave bounce
off, so detection improves in closed
areas such as corridors, entrance halls,
bathroom facilities and offices. It
decreases in open or large spaces such
as garages, porches etc. In case of
DISABLED
2000 W
APPLICATIONS
ISIMAT+ A motion detector, with adjustable head and 200° detection angle and up to
twelve metres frontal detection range when installed at two to three metres height.
The ISIMAT+ detects invisible infrared from persons and other heat sources without emitting
any type of radiation, it’s output circuit activates when a source moves in front of its detector
and deactivates when it no longer detects the movement after an adjustable delay.
ISIMAT+ FEATURES
• 10A Rating
• 200° detection angle
• 12m frontal detection, lateral 8m and 180° horizontal rotation of detector
• IP55 rated
• 3 seconds to 30 minutes timing
• Adjustable between 5 - 200 lux
LIGHTING CONTROLS
SECURITY
46
PIR MOTION DETECTORS
O R D E R I N G D ATA
DISABLED
PROFESSIONAL PIR MOTION DETECTOR (5A) 360º
Catalogue No.
Description
Units
CIRCUMAT
Ceiling Multi-sensor - surface
each
APPLICATIONS
CIRCUMAT Designed to be small and discrete. Ideal for hotels and offices for the
automatic control of lighting.
ALPHA
2000 W
TIME
CONTROLS
1200 VA
VA
2000 VA
VA
CIRCUMAT FEATURES
2000 W
900 VA
VA
TV AMPLIFIERS
900 VA
VA
100 VA
VA
CIRCUMAT
• Surface mount on the ceiling (120mm
diameter x 25mm height)
• Status LED detects movement or
changes in lighting conditions outside
of the selected level
• Zero-crossing relay for a better
switching of LED-type loads, fluorescent
or low energy lighting
• Adjustable parameters: detection area,
timing and light sensitivity
• 7m diameter detection range, (360º)
@ 2.5mh
• Power supply 230V AC. 50-60Hz
• Switch capacity 5A at 230V AC
• Timing from 3 sec to 30 min
• Pulse function 1 sec ON/9 sec OFF
• Light sensitivity from 5 to 1000 lux
O R D E R I N G D ATA
PIR MOTION DETECTOR (10A)360º
Catalogue No.
LIGHTING
CONTROLS
COMMUNICATIONS
Units
each
each
each
ACCESSORIES
ALPHA
2000 W
DICROMAT+ CR
Catalogue No.
Description
MANDO CR
Remote Control for CR range of proximity switches
Units
each
DICROMAT AND DICROMAT+ CR APPLICATIONS
1200 VA
VA
900 VA
VA
A motion detector for flush ceiling installation, which can be set up by controls in the sensor
head or on the DICROMAT+ CR also by the MANDO CR remote control (this allows the
setting of the parameters without having to climb a ladder and saves time in both installation
and maintenance). Both sensors are ideal on their own or for installations with several single
detectors such as hotels, offices, corridors, etc. (DICROMAT+CR with DICROMAT
SENSOR(s)+
100 VA
VA
PRODUCT SPECIFICATION
2000 VA
VA
2000 W
900 VA
VA
• 360º detection angle and up to 7m detection diameter (when installed at 2.5m height).
• Ideal for hotels, large rooms or corridor installation as they allow additional movement
sensors to be connected (up to 4) from a single power supply (DICROMAT SENSOR+)
• Adjustable parameters: timing, light, and sensitivity
• It can be programmed using the remote control CR CONTROL (optional)
• Status LED that activates when the system detects motion
• Zero-crossing relay for better switching LED type loads, fluorescent or low energy lighting
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
Description
DICROMAT
Motion Detector
DICROMAT+ CR
Programmable Motion Detector
DICROMAT SENSOR+ Additional Sensor
MANDO CR APPLICATIONS
TEST EQUIPMENT
& TOOLS
Remote Control for programming CR range of proximity switches, allows adjustment of
time/lux/sensitivity etc. without the need to reach the sensor and so reduce the need for
ladders/work platforms or tools.
FUSES & GENERAL
PRODUCTS
MANDO CR
MANDO CR FEATURES
• 8m range (approx.)
• Memory (repeat last program)
• Additional features: test, holiday mode, alarm mode and 5 hour timer
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
LIGHTING CONTROLS
47
PEC1000/EL
IDEAL FOR
BUILD-IN
APPLICATIONS
PCM1000
SECURITY
PHOTO ELECTRIC CONTROLS
DISABLED
P12RE
IP65
P42E
TIME
CONTROLS
IP54
ALPHA
O R D E R I N G D ATA
2000 W
VEGA
1200 VA
VA
2000 VA
VA
2000 W
900 VA
VA
900 VA
VA
IP54
Units
Electronic PEC Kit
Electronic PEC Head (for PEC1000)
Nitelighter PEC Head
Light Sensor
Two Part Photocell 70 lux
P42 Detector for P42E Only
each
each
each
each
each
each
APPLICATIONS
Exterior security lighting at warehouses,
goods yards, hospitals, colleges, car parks,
private dwellings and street lighting.
O R D E R I N G D ATA
P H O T O - E L E C T R I C C E L L W I T H A D J U S TA B L E T I M E / L U X
Description
Units
VEGA
CDS27
Electronic PEC Adjustable Lux
Electronic PEC Adjustable 10(3)A
each
each
APPLICATIONS
To control exterior lighting.
INDUSTRIAL
CONTROLS &
THERMOSTATS
CABLE
PROTECTION
VEGA FEATURES
CDS27 FEATURES
lux levels can be set between 5 - 300 lux • Twilight switch for control of lighting
installations
LED lux level indicator
• Controls a wide range of lighting loads
Energy Saving
(including LED), making this unit an
IP54 rating
ideal element for public lighting
1-8 hr adjustable time
installations
Delay to protect unwanted operation
• 60 second delay to prevent unwanted
Rated 10A
operation.
• Wall and lamp post installation is
possible
• Adjustable lux 5 - 300
• IP54 rating
• Rated 10A @ 230V AC
PEC MODELS INCLUDE
PEC1000/EL standard PEC is available as an
electronic kit. Consisting of PEC Head, NEMA
Socket and Wall Bracket. Heads only (T14/EL)
PRODUCT SPECIFICATION
also available.
PCM1000 is a compact wire-in PEC, specifically
Photo-Electric Cells are designed to
automatically switch lights on at dusk and designed for mounting into lighting fixtures,
off at dawn.
including road signs, floodlights, bulkheads, patio
lamps and other decorative luminaires.
Available with adjustable or precalibrated to switch at 70 lux as standard. Incorporates a photodiode sensor.
This ensures that not only will they
P42E and P12RE are two part photocell kits.
operate during night hours but also
Ideal for use where a separate sensor head is
during prolonged periods of dull weather required e.g bulk head. P42E features an on/off
conditions when adequate lighting may
switch. Replacement head available (P42D).
be equally as important.
Both types are suitable for use with all types of
PEC units incorporate a delay factor to
lamps (including high pressure and low pressure
ensure that sudden lighting (such as car
sodium, mercury fluorescent and tungsten
headlights), do not trigger the switch.
filament).
COMMUNICATIONS
Catalogue No.
•
•
•
•
•
•
•
Description
PEC1000/EL
T14/EL
PCM1000
P12RE
P42E
P42D
LIGHTING
CONTROLS
CDS27
100 VA
VA
Catalogue No.
TV AMPLIFIERS
PHOTO-ELECTRIC CELLS
CDS27 TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION
Catalogue No.
Type
Resistive Load
Lamp Load
Lux
PEC1000/EL
T14/EL
PCM1000
P12RE
P42E
VEGA
Electronic
Electronic
Thermal
Electronic
Electronic
Electronic
2000 Watts
2000 Watts
2000 Watts
2000 Watts
2000 Watts
2000 Watts
2 x 400W HPS 60µ PFC
2 x 400W HPS 60µ PFC
2 x 400W HPS 60µ PFC
2 x 250W HPS 60µ PFC
2 x 250 HPS 60µ PFC
2 x 250 HPS 60µ PFC
70
70
70
70
70
70
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
Lux Setting:
Timer Setting:
Switching Delay:
Operating Temperature range:
Environmental Protection:
230V AC 50Hz
10 Amps Resistive - 3 Amps Inductive
2300W Incandescent
1000W Halogen
400W Fluorescent (without compensated capacitor)
250W Energy Saving Lamps
5 - 300 lux adjustable
1 - 8 hours adjustable or Dusk to Dawn
ON/OFF - 60 secs
-20˚C to +45˚C
IP 54
TEST EQUIPMENT
& TOOLS
Operating Voltage:
Maximum Load:
SECURITY
48
LIGHTING CONTROLS
KEY CARD ENTRY / ENERGY CONTROL KIT
O R D E R I N G D ATA
K E Y C A R D E N T RY / E N E R G Y C O N T R O L K I T
DISABLED
IP65
CREDIT CARD SIZE
KCE2/CC/S
TIME
CONTROLS
TV AMPLIFIERS
LIGHTING
CONTROLS
COMMUNICATIONS
INDUSTRIAL
CONTROLS &
THERMOSTATS
Description
Units
KCE1/CC/S
KCE2/CC/S
CARD/CC
EDL
1 Switch Key Card Entry/Energy Control Kit
2 Switch Key Card Entry/Energy Control Kit
Key Card Pack of 10
Electric Door Lock 8-12V AC
each
each
each
each
APPLICATIONS
EACH KIT CONTAINS:
Offers a secure method of providing restricted • 1 or 2 x 25A surface mounting
entry as well as helping to reduce energy costs
card switches
for hotels, boarding houses, schools and
• Control unit (25A) for door entry,
lighting and air conditioning etc.
colleges, conference centres, fitness clubs,
offices, laboratories and research establishments. • 10 x Key Cards
KEY CARDS
ENERGY EFFICIENT
CABLE
PROTECTION
Catalogue No.
USE OF LIGHT AND POWER
SURFACE MOUNTING - CAN BE USED FOR DOOR ENTRY
AND/OR CONTROL OF LIGHTING AND POWER
FEATURES
• Weatherproof (IP65) card switches
room or building - provides door entry
suitable for installation indoors and
(when wired to an appropriate door
outdoors
lock)
• Can be installed with an appropriate
3). One card switch installed inside the
door lock enabling room access to
room or building - provides switching of
keycard holders only
lighting, air conditioning etc
• Suitable for installation in three different • Energy efficient use of light and power
ways:
• 35 second delay after card is removed
1). One card switch installed outside a
allows safe exit from room
room or building and one card switch
• Back-lit card ‘sense’ indicator
installed inside the room or building • Neon locator
provides door entry (when wired to an • Credit card size key cards
appropriate door lock) and switching of • Additional key cards available
lighting, air conditioning etc
• 2 separate memories (max 20 cards,
2). One card switch installed outside a
2 x 10) e.g. guests and staff
KEY CARD SWITCHES
O R D E R I N G D ATA
CONTROLS USE OF
LIGHT & POWER
KEYCARD SWITCHES
KEYCARD SIZE
80x25mm
(NOT CREDIT
CARD SIZE)
Units
KCS
KCS/PC
KCS/PB
KCS/SK
each
each
each
each
Keycard Switch (16A) white
Keycard Switch (16A) Polished Chrome Finish
Keycard Switch (16A) Polished Brass Finish
Keycard - pack of 10
IDEAL FOR
HOTELS,
GUEST HOUSES,
SHOPS &
OFFICES
WHITE
Catalogue No. Description
KCS
APPLICATIONS
Helps to reduce energy costs and is a safety benefit in that unattended rooms are not left
with electrical devices switched on. e.g. hairdryers, air conditioning, lighting etc.
On removal of the keycard, the energy supply is left connected for 30 seconds to allow safe
exit from the room. An integral neon assists the user to locate the keyswitch on their return.
Available in a range of attractive finishes.
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
FEATURES
CHROME
FINISH
KCS/PC
• Can reduce lighting, heating and air
conditioning costs
• High current rating (16A)
• Surface or flush mountable
• Unique keycard size (80L x 45W mm)
1 supplied with each switch
BRASS
FINISH
KCS/PB
•
•
•
•
•
Neon locator
30 secs switch off delay after card removed
Metallic finish options
Additional keycards available
Fits single gang backbox for flush or
surface applications
Note: Live and Neutral required.
TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected]
LIGHTING CONTROLS
49
SECURITY
1500 WATTS SLIDE DIMMER SWITCH (MAINS/LOW VOLTAGE)
O R D E R I N G D ATA
1 5 0 0 WAT T S S L I D E D I M M E R S W I T C H
(FOR ALL LIGHTING LOADS)
Description
Units
SD1500/BL
1500 Watt Mains Black Dimmer
each
APPLICATIONS
Ambient lighting control in offices,
restaurants, shops and homes, etc.
DISABLED
Catalogue No.
PRODUCT SPECIFICATION
• Metal front plate finished in matt black.
• Power handling capacity 20 - 1500w
(Surface Mounting), 20 -1200w
(Flush Mounting)
TIME
CONTROLS
• Supplied with a two gang plastic surface
box
• Dimensions 120 (h) x 178 (w) x
45mm (d)
• Quick blow fuse protection
• Complies with EC and Low
Voltage Directives.
Also complies with BS EN 55015,
BS EN 61547 and BS EN 60555-2
TV AMPLIFIERS
FEATURES
• Capable of dimming all types of
resistive and inductive mains loads,
including LED, Low Energy, Halogen,
Low Voltage and Neon Lighting
The Dimming range is dependant on the
load types and load performance
• Easily replaced fuse, supplied with two
spares
• LED Indicator
• Suitable for mounting vertically as
well as horizontally
• Smooth, calibrated slide operation
• Two year guarantee
SD1500/BL
O R D E R I N G D ATA
D I M M E R S W I T C H E S ( M A I N S V O LTA G E )
Catalogue No. Description
DM8/W 1000 Watt Mains White
DM8/C 1000 Watt Mains Matt Chrome
Units
each
each
HEAVY DUTY
UP TO
1000 WATTS
APPLICATIONS
PRODUCT SPECIFICATION
Available in 1000W mains (resistive).
Finished in White, or Matt chrome.
Suitable for mains lighting or electronic
lighting transformers
FROM A
1 GANG PLATE
MAINS VOLTAGE FEATURES
(MAINS VOLTAGE)
• High Wattage
• Single Plate
• 1 or 2 way switching
CABLE
PROTECTION
Note:If branded GU9/10 lamps fitted (Osram, GE, Phillips etc) full load can be used.
Non recognised brands, reduce load by 50%
If branded dimmable energy saving lamps fitted it can control a minimum of 6
up to a maximum of 15 lamps (not suitable for fluorescent tubes)
DM8/W
INDUSTRIAL
CONTROLS &
THERMOSTATS
Restaurants, homes, offices etc.
Load
200W-1000W
200W-1000W
COMMUNICATIONS
DIMMER SWITCHES (MAINS)
LIGHTING
CONTROLS
DIMS ALL
TYPES OF LOAD
FITS A
STANDARD
25mm BOX
TEST EQUIPMENT
& TOOLS
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
DM8/C
LIGHTING CONTROLS
SECURITY
50
TOUCH AND REMOTE CONTROL DIMMER SWITCHES
O R D E R I N G D ATA
DISABLED
TOUCH AND REMOTE CONTROL DIMMER SWITCHES
TIME
CONTROLS
TV AMPLIFIERS
LIGHTING
CONTROLS
COMMUNICATIONS
INDUSTRIAL
CONTROLS &
THERMOSTATS
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
Description
Units
RCD/6OOW
RCD/6OOC
RCD/6OOMC
RC/6OO
10W-600W Dimmer Switch - White
10W-600W Dimmer Switch - Matt Chrome
10W-600W Dimmer Switch - Mirror Chrome
Remote Control
each
each
each
each
APPLICATIONS
Homes, restaurants, clubs, offices, residential care homes etc. The remote control facility is
particularly beneficial for infirm or disabled people.
RCD/600C
FUSES & GENERAL
PRODUCTS
Catalogue No.
RCD/600W
RCD/600MC
FEATURES
PRODUCT SPECIFICATION
• Touch control or optional remote
control operation
• Can be used with, GU10 or similar
mains halogen lamps
• Suitable for use with mains or low
voltage circuits
• Overload protected
• Inbuilt “soft-start” extends lamp life
and gently raises light level
• Each remote control can operate up to
8 dimmers
• Fits standard 1 gang 16mm flush box
• Max 600 watts rating
(GU10 350 watts)
• Remote Control Handset (optional)
(batteries not supplied)
• Complies with BS EN 55015 and
BS EN 60669-2-1
600 WATTS ON
1 GANG PLATE
REMOTE
OR TOUCH
CONTROLLED
RC/600
ULTRA SLIM 1500 WATTS DIMMER SWITCH (MAINS/LOW VOLTAGE)
1500
WATTS
SCREWLESS
APPEARANCE
ID1500
BRUSHED
STEEL
O R D E R I N G D ATA
ULTRA SLIM 1500 WATTS DIMMER SWITCH
(MAINS/LOW VOLTAGE)
Catalogue No.
Description
Units
ID1500
100 - 1500W Dimmer (Brushed Steel)
each
APPLICATIONS
Restaurants, hotels, shops, homes and offices.
FEATURES
• Ultra slim screwless front plate - stainless • 1 or 2 way switching
steel finish
• Each dimmer can control up to 10 ERL
• High wattage
(YT range) transformers
• Soft start extends lamp life
• Complies with BS EN 60669-2-1 and
BS EN 55015 (not suitable for
• Safety shutdown circuitry
fluorescent or energy saving lamps)
• Fits standard 2G 25mm box (not supplied)
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
LIGHTING CONTROLS
51
SECURITY
FLEXIBLE LAMP ROPELIGHT
O R D E R I N G D ATA
LED FLEXIBLE ROPELIGHT
Catalogue No
Description
LEDIF50/W
LEDIF10/W
Units
Catalogue No
50m Kit
10m Kit
Description
LED/F1
LED/F13
WL/310
Units
Mains Lead (Internal)
Mains Lead (External)
Variable Flash Controller
FLEXIBLE LAMP ROPELIGHT
each
each
each
Description
Units
IF50/C
IF50/Y
IF50/G
IF10/C
Clear
Yellow
Green
Clear
50m Kit
50m Kit
50m kit
10m Kit
IF ROPELIGHT ACCESSORIES
Description
Units
Mains Lead (Internal)
Mains Lead (External)
Variable Flash Controller
IF/LED ROPELIGHT ACCESSORIES
each
each
each
Description
Units
F3
F4
F6
F8
F11
F14
Coupler
End Cap
Mounting Clip
Channelling 2 x 1 Metre
T Connector
Water Resistant Cover
each
each
each
each
each
each
LOW POWER
CONSUMPTION
LOW ROPELIGHT
TEMPERATURE
50,000
HOUR LIFE
LEDIF50 Range
COMMUNICATIONS
APPLICATIONS
Ropelight is suitable for exterior or interior use. Ideal for the illumination of building outlines,
festive street lighting, forming shapes, shop window displays or for decorative lighting inside
hotels, clubs, pubs, garden centres, houses etc. Run lengths up to 100 metres achievable,
with a wide range of colours and accessories, the possibilities are numerous.
PRODUCT SPECIFICATION
This Flexible Ropelight is made from quality durable solid PVC. Highly flexible with
temperature stability and UV resistance.
Outdoor/Indoor Use
Ease of Installation
High Strength
Long Standard Lamp Life (25,000 hrs)
Flexible
Shock Resistant
Re-usable
Dimmable (IF Range)
•
•
•
•
1 x 10m length Ropelight
1 x Mains Lead
1 x Male Connector
1 x End Cap
50m KIT CONTAINS
• 1 x 50m length Ropelight
• 1 x Mains Lead
• 1 x End Cap
25,000
HOUR LIFE
IF50 Range
CABLE
PROTECTION
•
•
•
•
•
•
•
•
10m KIT CONTAINS
OPERATING TEMP
-30°C TO +45°Ç
INDUSTRIAL
CONTROLS &
THERMOSTATS
FEATURES
LED RANGE
Voltage:
Outside Diameter:
Bulb Spacing:
Bulbs Per Metre:
Cutting Length:
230V
13mm
2.78cm
36
1 metre
230V
13mm
2.78cm
36
2 metre
F8
CHANNELING HOLDS
ROPELIGHT NEATLY
IN POSITION
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
IF RANGE
TEST EQUIPMENT
& TOOLS
CONTROLLER FOR ROPELIGHT
IF Range Cat No WL/2C = Static/variable flash, up to 100m run (Internal)
LED Range Cat No WL/310 =Variable flash up to 100m run (Internal)
TECHNICAL SPECIFICATION
LIGHTING
CONTROLS
Catalogue No
TV AMPLIFIERS
F1
F13
WL/2C
SUITABLE FOR
INTERNAL &
EXTERNAL USE
TIME
CONTROLS
Catalogue No
Catalogue No
AVAILABLE IN
10M OR 50M KITS
DISABLED
White LED
White LED
LED ROPELIGHT ACCESSORIES
COMMUNICATIONS
DISABLED
SECURITY
52
WIRELESS INTERCOM SYSTEM
UNLIMITED EXPANDABILITY
O R D E R I N G D ATA
WIRELESS INTERCOM SYSTEM
Catalogue No.
Description
Units
FS-2
FS-25
Wireless Intercom Kit
Additional Intercom Stations
each
each
APPLICATIONS
Wireless communication in offices, factories,
warehouses etc where cable installation would
be difficult or expensive.
2KM RANGE
EACH KIT CONTAINS:
• 2 x Intercom stations
• 2 x Plug-in power supplies
• 2 x Li-ion batteries
FEATURES
No cable required
Up to 2 Km range (line of sight)
High quality speech
Can have unlimited number of stations
in system
• Hands free operation
• Mains or rechargeable lithium battery
operation (batteries and mains adaptors
supplied)
TIME
CONTROLS
•
•
•
•
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
TV AMPLIFIERS
FS-2
• 99 channels available (446MHz)
• Volume control
• Desk, wall mountable or carry (fully
portable)
• Licence exempt
• 5 call tones
• Loudspeaker Headphone socket
(3.5mm)
• Adjustable ring tone
• VOX
DIGITAL INTERCOM SYSTEM
HANDS FREE
SPEECH
WALL OR DESK
MOUNTED
O R D E R I N G D ATA
D I G I TA L I N T E R C O M S Y S T E M
Catalogue No.
Description
Units
CM-211MK/2
CM-211MK/4
CM-211MK/6
CM-211M
2 Way Starter Kit
4 Way Starter Kit
6 Way Starter Kit
Additional Intercom Units
each
each
each
each
APPLICATIONS
Ideal for small businesses, offices, warehouses, factories and private dwellings.
EACH KIT CONTAINS:
CM-211M
EACH INTERCOM IS AN
11 BUTTON
MASTER
VOLUME
CONTROL
EXPANDABLE
UP TO 12 STATIONS
•
•
•
•
2 x Intercom units (CM-211MK/2)
4 x Intercom units (CM-211MK/4)
6 x Intercom units (CM-211MK/6)
1 x Power Supply (12V DC)
CABLE REQUIREMENTS
5 cores + 1 core per station
FEATURES
•
•
•
•
•
Master to Master system
Hands-free operation
Desk or wall mounting
Simple to use
Good speech quality
•
•
•
•
Simultaneous two way speech
Electronic call tone
Speech and call tone volume control
Expandable up to 12 stations
4 & 6 WAY KITS AVAILABLE
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
THERMOSTATS/HEATING CONTROLS
53
SECURITY
FROSTATS
O R D E R I N G D ATA
T H E R M O S TAT S
Description
Units
FTR/E
FTR/N
10A Frostat with Housing(IP65)
10A Frostat
each
each
TAMPER
RESISTANT
APPLICATIONS
The FTR/E allows control of low temperature switching in internal or external applications or
where condensation, tampering etc could be a concern. The FTR/E is suitable for internal
applications.
TIME
CONTROLS
FTR/N PRODUCT SPECIFICATION
3 wire, compact thermostat with high amperage contacts. An accelerator is also fitted
for fast response.
IP65
TV AMPLIFIERS
FTR/E PRODUCT SPECIFICATION
3 wire tamper proof thermostat in an IP65 rated enclosure. Suitable for greenhouses, garages
and other external situations. Can also be used for ventilation control. An accelerator is also fitted.
DISABLED
Catalogue No.
FTR/E
LIGHTING
CONTROLS
TECHNICAL SPECIFICATION
Catalogue No.
FTR/E
FTR/N
Temperature range
-5˚C - +25˚C
-5˚C to +15˚C
Voltage range
230V AC
230V AC
Current rating - Heating
10A
10A
Current rating - Cooling
3A
2A
Cable requirements
3 core
3 core
COMMUNICATIONS
NOTE
Modern central heating boilers produce a much lower background heating temperature.
When installed in a garage/outhouse etc, consider adding pipe thermostats for additional
protection to the frostat circuitry.
FTR/N
INDUSTRIAL
CONTROLS &
THERMOSTATS
CYLINDER/PIPE THERMOSTAT
SUPPLIED WITH
O R D E R I N G D ATA
C Y L I N D E R / P I P E T H E R M O S TAT
Description
Units
CPT16
16A Cylinder/Pipe Thermostat
each
APPLICATIONS
For fitting to heating pipes or hot water
cylinders.
COILED SPRING
FIXING CABLE
VOLT - FREE
CONTACTS
CPT16
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
TECHNICAL SPECIFICATION
Catalogue No.
CPT16
Temperature range
10˚C - 90˚C
Voltage range
9V - 230V AC
Current rating - Heating
16A (2.5)
Cable requirements
2 core + earth
TEST EQUIPMENT
& TOOLS
CPT16 PRODUCT SPECIFICATION
2 wire compact design Cylinder/Pipe
Thermostat with high amperage contacts.
The strong spring coiled fixing cable supplied
gives excellent contact to cylinder or pipe.
CABLE
PROTECTION
Catalogue No.
SECURITY
54
THERMOSTATS/HEATING CONTROLS
DIGITAL THERMOSTATS
O R D E R I N G D ATA
TWO WIRE
DRT1
DISABLED
BATTERY
OPERATED
TECHNICAL SPECIFICATION
Catalogue Nos.
DRT1/DRT2
Temperature range
50C - 350C
Power supply
2 x AAA batteries
(not supplied)
Current rating - Heating
5A (24-240V)
Current rating - Cooling
5A (24-240V)
Cable requirement
2 core
Description
Units
DRT1
DRT2
5A Digital Room Thermostat
5A Programmable Digital Room Thermostat
each
each
APPLICATIONS
Houses, apartments, sheltered housing, offices, waiting rooms, shops, restaurants and other
commercial buildings.
FEATURES
• Accurate control temperature
measurement (0.50C)
• Requires only 2 core cable
• Battery operation
• Large clear LCD display
• Flush or surface mountable (fits directly
onto 35mm deep 1 gang flush box)
• Heating or cooling operation
PROGRAMMABLE
RADIO CONTROLLED DIGITAL THERMOSTATS
O R D E R I N G D ATA
DRT1RC
RADIO
CONTROLLED
BATTERY
OPERATED
DIGITAL ROOM THERMOSTATS
Catalogue No. Description
Units
DRT1RC 5A Wire-Free Radio Controlled Digital Room Thermostat
DRT2RC 5A Wire-Free Radio Controlled Programmable
Digital Room Thermostat
each
FEATURES
• Accurate control temperature
measurement (0.50C)
• Requires only 2 core cable
• Battery operation
PRODUCT SPECIFICATION
PROGRAMMABLE
WIRE FREE
SAVES INSTALLATION TIME
each
APPLICATIONS
Houses, apartments, sheltered housing, offices, waiting rooms, shops, restaurants and other
commercial buildings.
DRT2RC
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
Catalogue No.
PRODUCT SPECIFICATION
DRT1
• 4 inbuilt programmes per time group
• Easy to use digital thermostat
(Weekdays-Saturday or Sunday)
• Function displays symbols to indicate
• Temporary or permanent override
on/off
• Low battery warning
• 0.50C increments to set temperature
• 12 or 24 hour clock display
• 0.50C increment temperature display
• Time adjustable in 15 minute segments
DRT2
• Delay on ON facility (ideal for
• Easy to use programmable digital
compressor systems)
thermostat
• Auto defrost at 50C
• Easily programmed
• 0.10C temperature display
VOLT - FREE
CONTACTS
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
TV AMPLIFIERS
TIME
CONTROLS
DRT2
DIGITAL ROOM THERMOSTATS
DRT1RC
• Easy to use wire-free radio controlled
digital thermostat
• Receiver fits standard 35mm 1 gang
flush box
• Specification as DRT1
• Large clear LCD display
• Flush or surface mountable (fits directly
onto 35mm deep 1 gang flush box)
• Heating or cooling operation
TECHNICAL SPECIFICATION
Catalogue Nos.
DRT1RC/DRT2RC
Temperature range
50C - 350C
Power supply
2 x AAA batteries
(not supplied)
Current rating - Heating 5A (24-240V)
Current rating - Cooling 5A (24-240V)
Cable requirement
2 core
DRT2RC
• Easy to use wire-free radio controlled
programmable digital thermostat
• Receiver fits standard 35mm 1 gang
flush box
• Specification as DRT2
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
THERMOSTATS/HEATING CONTROLS
55
O R D E R I N G D ATA
Description
Units
RT16/3
RT16/3N
9105
16A Room Thermostat
Room Thermostat with Neon
Thermostat/Programmer Cover
each
each
each
APPLICATIONS
Room temperature control of heating, cooling or fan devices. Wide range of models available
for general purpose and specialised applications.
RT16/3 PRODUCT SPECIFICATION
TECHNICAL SPECIFICATION
Catalogue No.
RT16/3
Power supply
230V AC
Temperature range
10˚C - 30˚C
Voltage range
230V AC
Current rating - Heating
16A (4)
Cable requirements
3 core
3 wire thermostat with added benefits of
an accelerator and an indicator light,
(RT16/3N) for prompt response and
status.
RT16/3
RT16/3N
LIGHTING
CONTROLS
• Compact and attractive designs
• Requires only 2 core cable + earth
(RT16/2)
• Neon Indicator (RT16/3N)
O R D E R I N G D ATA
2 WIRE
T H E R M O S TAT S
Description
Units
RT16/2
9105
16A Room Thermostat
Thermostat/Programmer Cover
each
each
RT16/2
TECHNICAL SPECIFICATION
Catalogue No.
R16/2
Temperature range
5˚C - 30˚C
Voltage range
230V AC
Current rating - Heating
16A (2.5)
Current rating - Cooling
2.5A
Cable requirements
2 core + earth
RT16/3N with 9105
SEE PAGE 30
T H E R M O S TAT S
Catalogue No.
Description
Units
TRT16/N
9105
15A Tamper Resistant Thermostat
Thermostat/Programmer Cover
each
each
3 wire (3 core), compact thermostat with
high amperage contacts and the added
benefit of an accelerator.
TECHNICAL SPECIFICATION
Catalogue No.
TRT16/N
Power supply
230V AC
Temperature range
6˚C - +30˚C
Voltage range
230V AC
Current rating - Heating
15A (2.5)
Current rating - Cooling
5A
Cable requirements
3 core
TRT16/N
RESISTANT
TEST EQUIPMENT
& TOOLS
TRT16/N PRODUCT SPECIFICATION
TAMPER
CABLE
PROTECTION
O R D E R I N G D ATA
INDUSTRIAL
CONTROLS &
THERMOSTATS
2 wire compact thermostat with high
amperage contacts, suitable for heating
or cooling applications.
Membrane operation ensures long
accuracy life.
COMMUNICATIONS
Catalogue No.
R16/2 PRODUCT SPECIFICATION
TV AMPLIFIERS
• High Amperage Ratings
• Accelerator Fitted (TRT16/N, RT16/3,
RT16/3N, FTR/E)
• Tamper resistant (TRT16/N)
• Fast response operation
TIME
CONTROLS
FEATURES
DISABLED
AVAILABLE
WITH OR
WITHOUT
NEON
INDICATOR
T H E R M O S TAT S
Catalogue No.
SECURITY
THERMOSTATS
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
PINS LOCK
TO RESTRICT
MOVEMENT
THERMOSTATS/HEATING CONTROLS
SECURITY
56
DIGITAL CENTRAL HEATING PROGRAMMERS
UNIVERSAL
O R D E R I N G D ATA
D I G I TA L C E N T R A L H E AT I N G P R O G R A M M E R
DISABLED
BACK PLATE
Catalogue No.
Description
Units
CHC/1
9105
Digital Central Heating/Hot Water Programmer
Thermostat/Programmer Cover
each
each
APPLICATIONS
Controlling central heating and hot water in domestic, commercial and industrial installations.
Suitable for gravity and fully pumped systems.
IDEAL
CHC/1
LIGHTING
CONTROLS
TV AMPLIFIERS
TIME
CONTROLS
FEATURES
REPLACEMENT
PROGRAMMER
COMMUNICATIONS
SEE PAGE 30
O R D E R I N G D ATA
D I G I TA L C E N T R A L H E AT I N G P R O G R A M M E R
Catalogue No.
Description
Units
HC1
9105
1 Channel Digital Central Heating Programmer
Thermostat/Programmer Cover
each
each
INDUSTRIAL
CONTROLS &
THERMOSTATS
APPLICATIONS
A single channel programmer ideal for use in dwellings that use a combination boiler as the
heat source.
FEATURES
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
• 7 day 24 hour or weekday/weekend
programme options
• Inbuilt programmes
• Back light facility
• Integral frostat and roomstat
• 3 ON/3 OFF switchings a day or
permanent ON/OFF
• ON/OFF override and 1-3 hour
extension control
• Surface mounting and fits 1 gang
standard flush wall box
TECHNICAL SPECIFICATION
Catalogue No.
CHC/1
Power supply
230V AC 50Hz
Contact rating
3(1)A
No. of switched circuits
2 (CH + HW)
No. of switchings/day Up to 3 ON/3 OFF
CHC/1 with 9105
HC1
FUSES & GENERAL
PRODUCTS
• Compact stylish design
• Simple to programme and use
• Ideal as a replacement to existing
programmers as hot shoe, plug in base
fitting is compatible with most existing
central heating controllers
• Central heating/hot water control (joint
or independent hot water control)
• Large clear LCD display
• Battery back up (maintains programme
30 days)
SINGLE CHANNEL
VERSION FOR
USE WITH A
COMBINATION
BOILER
• Compact stylish design
• Simple to programme and use
• Ideal as a replacement to existing
programmers as hot shoe, plug-in base
fitting is compatible with most existing
central heating controllers
• Battery back up (maintains
programme for 30 days in the event of
power failure)
• 7 day 24 hour or weekday/weekend
programme options
•
•
•
•
Inbuilt programmes
Back light facility
Integral frostat and roomstat
3 ON/3 OFF switching’s a day or
permanent ON/OFF
• ON/OFF override and 1-3 hour
extension control
• Surface mounting and fits 1 gang
standard flush wall box
TECHNICAL SPECIFICATION
Catalogue No.
HC1
Power supply
230V AC 50Hz
Contact rating
3(1)A
No. of switched circuits
1
No. of switchings/day Up to 3 ON/3 OFF
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
THERMOSTATS/HEATING CONTROLS
NO MORE
O R D E R I N G D ATA
S E L F - R E G U L AT I N G T R A C E H E AT I N G C A B L E
Description
Units
THC/2/K
THC/5/K
THC/20
THC/PCK
FTR/E
FTR/N
2m Length Self-Regulating Trace Heating Cable Kit
5m Length Self-Regulating Trace Heating Cable Kit
20m Drum Self-Regulating Trace Heating Cable
Termination Kit
10A Frostat with IP65 Housing
10A Frostat
each
each
each
each
each
each
FROZEN PIPES
THC
DISABLED
Catalogue No.
SECURITY
SELF REGULATING TRACE HEATING CABLE (THC)
57
Note: A heat gun [not supplied] and crimping pliers [not supplied] are required to complete installation
TIME
CONTROLS
APPLICATIONS
The ideal solution for low power frost protection or temperature maintenance on metallic and
non-metallic pipes, valves, roof gutters, drain pipes, pumps, water taps, small water tanks
and boiler condensate pipes, etc.
• Self-regulating – output automatically
adjusts to suit the prevailing conditions,
the lower the ambient temperature, the
higher the output
• Tough cable protection with tin-plated
copper braiding and a thermoplastic
outer sleeve
• Moisture proof and UV resistant
• Max exposure temperature 80°C
(de-energised), 65°C (energised)
• Can be used in a wide variety of
environments
NOTE: FOR 20 METRE DRUM
Remember to order a termination kit
for each run of trace heating cable
required.
• 230V, nominal output 10W/m
@10°C ambient temperature
• Min bending radius 25mm
• Supplied in 20 metre drums for cutting
to virtually any required length, or in
5 or 2M pre-cut lengths. Max cable
run 144M @ 10°C (16Amp) power.
MOISTURE
PROOF
AND UV
RESISTANT
• Use with ERL Frostats for even more
control on start up temperature
(see page 53 of our main catalogue
for a full specification)
INDUSTRIAL
CONTROLS &
THERMOSTATS
EACH 5 METRE KIT CONTAINS
• 1 x 5 metre length of Trace Heat cable
• 1 x Termination Kit
• 1 x 2 metre length of Trace Heat cable
• 1 x Termination Kit
THC/PCK
EACH TERMINATION
KIT CONTAINS
• 6 x Heat shrink sleeves [various]
• 1 x Connection insulator
• 2 x Wire pins [ferrules]
• 1 x Pin-type cable socket
• 1 x M25 Cable gland
CABLE
PROTECTION
EACH 2 METRE KIT CONTAINS
COMMUNICATIONS
• Dimensions 13.6 x 5.5mm
• Min installation temperature -45°C
LIGHTING
CONTROLS
• Will not overheat or burn out, even
when overlapped
SIMPLY CONNECT
FOR YEAR ROUND
PROTECTION
TV AMPLIFIERS
FEATURES
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
INDUSTRIAL CONTROLS
SECURITY
58
COMMAND STATIONS (IP66)
O R D E R I N G D ATA
C O M M A N D S TAT I O N S ( W E AT H E R R E S I S TA N T )
TIME
CONTROLS
DISABLED
Catalogue No.
Description
Units
SC1/50/N
10A Push-Twist Emergency Stop Switch
SC1/50/NS
10A Emergengy Stop Switch with Key Release
SC1/50/PFS/R 10A Red Palm/Foot Switch Station
SC1/50/N
SC1/50/NS
each
each
each
PRODUCT SPECIFICATION
Rugged polycarbonate construction with 2 x 20mm blind threaded conduit entries.
Captive quick-release cover screws. Fitted internally with 2 push switches; one N/O,
one N/C.
PALM
OR FOOT
OPERATION
IP66
Rated 10A @ 600V
Both SC1/50/N and SC/50/NS contain latching mechanisms (twist to reset) and
comply to EN418
TV AMPLIFIERS
SC1/50/PFS/R
CONTROL STATIONS (IP66)
O R D E R I N G D ATA
CS/KMA
CS/KMO
AVAILABLE IN
MOMENTARY
IP66
OR
MAINTAINED
VERSIONS
CS/PBR
CS/DIO
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
CS/ROS
C O N T R O L S TAT I O N S ( I P 6 6 )
Catalogue No.
Description
Units
CS/KMA
CS/KMO
CS/ROS
CS/PBR
CS/DIO
KRSD/F
SMF
Keyswitch - 2 position (maintained)
Keyswitch - 2 position (momentary)
Rotary ON/OFF Switch (maintained)
Pushbutton Switch (momentary) - Red
Double Pushbutton ON/OFF Switch
Roller Shutter Door Keyswitch - 3 position (momentary)
Surface Mounting Metal Frame - 1 gang
each
each
each
each
each
each
each
APPLICATIONS
A range of control stations suitable for internal and external use in a wide range of
applications, eg. Roller shutters, machine control.
FEATURES - CS/KMA, CS/KMO
FEATURES - CS/ROS
• Rugged ABS enclosure with 2 x 20mm
cable gland entries
• Available in maintained (CS/KMA) or
momentary (CS/KMO) switches
• Key switch operation - 2 keys supplied
• IP66
• 1 x N/O and 1 x N/C changeover
switches fitted
• Rated use 3A @ 230V AC
• Rugged ABS enclosure with 2 x 20mm
cable gland entries
• Rotary (maintained) on/off switch
• IP66
• 1 x N/O and 1 x N/C changeover
switches fitted
• Rated use 3A @ 230V AC
FEATURES - CS/PBR
KRSD/F
•
UP
•
OFF
•
DOWN
• Rugged ABS enclosure with 2 x 20mm
cable gland entries
• Push button (momentary) switch in
red or green
• IP66
• 1 x N/O and 1 x N/C changeover
switches fitted
• Rated use 3A @ 230V AC
FEATURES - CS/DIO
• Rugged ABS enclosure with 2 x 20mm
cable gland entries
• Combined Start (I), Stop (O) push
button
• IP66
• 1 x N/O and 1 x N/C changeover
switches fitted
• Rated use 3A @ 230V AC
FEATURES - KRSD/F
• Max contact rating 4A @ 24V
• Stainless steel front plate
• Central off position and two
momentary independent contacts for
up/down operation
• Supplied with 2 keys
• Flush box supplied (use SMF for
surface mounting)
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
INDUSTRIAL CONTROLS
59
SECURITY
ISOLATORS
ISOLATORS (IP56)
PRODUCT SPECIFICATION
ISO203E/N
ISO204E/N
ISO353E/N
ISO354E/N
ISO454E/N
ISO634E/N
I S O L AT O R S ( I P 5 6 )
20 Amp 3 Pole Isolator (IP56)
20 Amp 4 Pole Isolator (IP56)
35 Amp 3 Pole Isolator (IP56)
35 Amp 4 Pole Isolator (IP56)
45 Amp 4 Pole Isolator (IP56)
63 Amp 4 Pole Isolator (IP56)
TIME
CONTROLS
CAN BE
PADLOCKED
O R D E R I N G D ATA
each
each
each
each
each
each
ROTARY ISOLATORS (IP65)
PRODUCT SPECIFICATION
LIGHTING
CONTROLS
IP65
TD425
TV AMPLIFIERS
ISO203E/N
Rugged polycarbonate construction with 6 x 20mm knockouts. Captive quick-release
cover screws. Switch padlockable in two positions. Fitted with 4 pole switch block plus
neutral and earth terminals.
DISABLED
IP56
The units have a tough polycarbonate enclosure and offer 4 x 25mm top/bottom
knockouts with 2 x 20mm adapters supplied. The isolators are lockable in the off
position. Self-retaining cover screws.
O R D E R I N G D ATA
Catalogue No.
Description
Units
TD425
TD463
TD480
25 Amp 4 Pole Isolator
63 Amp 4 Pole Isolator
80 Amp 4 Pole Isolator
each
each
each
LOCKABLE
IN TWO POSITIONS
COMMUNICATIONS
R O TA R Y I S O L AT O R S ( I P 6 5 )
INDUSTRIAL
CONTROLS &
THERMOSTATS
PRODUCT SPECIFICATION
A range of IP65 rated isolators with captive cover screws, a 4 x switch block
contact(removable for ease of wiring) and solid connections for neutral and earth are
also provided.
4 x 20/25mm knockouts. The switch is also lockable in the off position by upto 3
separate padlocks.
IP65
O R D E R I N G D ATA
CABLE
PROTECTION
The rugged polycarbonate body can only be undone in the off position
R O TA R Y I S O L AT O R S ( I P 6 5 )
Description
Units
RI425
RI432
RI440
25 Amp 4 Pole Isolator
63 Amp 4 Pole Isolator
80 Amp 4 Pole Isolator
each
each
each
RI425
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
LOCKABLE
IN THREE POSITIONS
TEST EQUIPMENT
& TOOLS
Catalogue No.
INDUSTRIAL CONTROLS
DISABLED
SECURITY
60
COMBINED EMERGENCY STOP/START COMMAND STATION (SC1/SES)
STOP-START
O R D E R I N G D ATA
COMBINED EMERGENCY STOP/START COMMAND STATION
SINGLE POINT
OF OPERATION
each
• Convenient single point of operation
for both emergency stop and start
functions
• Rugged ABS enclosure with 2 x 20mm
threaded conduit entry points
• Captive, quick release cover screws
• Surface mounting
• Weather resistant to IP56
TIME
CONTROLS
TV AMPLIFIERS
LIGHTING
CONTROLS
COMMUNICATIONS
Units
Combined Emergency Stop/Start
Command Station
FEATURES
• Press to operate, twist to reset stop
switch function, complies with EN418
• Push button start function
• N/O and N/C changeover switches
fitted for both functions
• Rated 3A @ 240V AC [resistive load]
SC1/SES
ROLLER SHUTTER DOOR/HOIST CONTROL (CS/RSD)
UP-OFF-DOWN
O R D E R I N G D ATA
ROLLER SHUTTER DOOR/HOIST CONTROL
CONTROL STATION
Catalogue No.
Description
Units
CS/RSD
Roller Shutter Door/Hoist Control
each
APPLICATIONS
Suitable for internal and external installation for the control of roller shutter doors, electric
hoists etc
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
CS/RSD
TEST EQUIPMENT
& TOOLS
Description
SC1/SES
APPLICATIONS
Suitable for internal and external installation for the control of industrial electrical equipment.
IP56
FUSES & GENERAL
PRODUCTS
Catalogue No.
• Rugged ABS enclosure with 2 x 20mm
threaded conduit entry points
• Captive, quick release cover screws
• Surface mounting
• Weather resistant to IP66
• Push button operation
• N/O and N/C changeover switches
fitted
• Rated 3A @ 240V AC [resistive load]
IP66
IDEAL FOR
ROLLER
SHUTTER
DOORS OR
ELECTRIC
HOISTS
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
INDUSTRIAL CONTROLS
61
SECURITY
RELAYS AND BASES
O R D E R I N G D ATA
R E L AY S
Catalogue No.
Price
Relay Coil Voltage
8 Pin, 2 Pole. Standard
8 Pin, 2 Pole. Standard
8 Pin, 2 Pole. Standard
8 Pin, 2 Pole. Standard
8 Pin, 2 Pole. Standard
8 Pin, 2 Pole. Standard
11 Pin, 3 Pole. Standard
11 Pin, 3 Pole. Standard
11 Pin, 3 Pole. Standard
11 Pin, 3 Pole. Standard
11 Pin, 3 Pole. Standard
each
each
each
each
each
each
each
each
each
each
each
12V DC
24V DC
12V AC
24V AC
110V AC
240V AC
12V DC
24V DC
110V AC
110V DC
240V AC
Catalogue No.
Description
Units
8 Pin, 2 Pole. (10A)
11 Pin, 3 Pole. (10A)
each
each
RS SERIES
R E L AY B A S E S
RS083N
RS113N
WIDE
RANGE
APPLICATIONS
FEATURES
Allows user to interface different voltage
devices in an electrical system e.g. door entry • High current rating - 10A @
250V AC/30V DC
systems using maglocks.
TV AMPLIFIERS
152E/12D
152E/24D
152E/12A
152E/24A
152E/110A
152E/240A
153E/12D
153E/24D
153E/110A
153E/110D
153E/240A
TIME
CONTROLS
Units
DISABLED
Description
152/153
SERIES
Wide range of coil voltages
Standard 8 and 11 pin configurations
LED indicator (relays)
Manual operation button and mechanical
flag indicator (relays)
• Din-rail and surface mounting (bases)
LIGHTING
CONTROLS
•
•
•
•
FIRE ALARM RELAY
COMMUNICATIONS
O R D E R I N G D ATA
F I R E A L A R M R E L AY
Catalogue No.
Description
Units
FAR1224
Fire Alarm Relay
each
• Operates on either a 12V or 24V DC
voltage
• 12A contact rating @ 28V DC
• Selectable for N/O or N/C activation
• 3 screw connectors for + and -
INDUSTRIAL
CONTROLS &
THERMOSTATS
APPLICATIONS
To control magnetic locks or similar devices on activation of the fire alarm system, or by
activation of a dedicated switch by means of either a N/O or N/C input
FEATURES
FAR1224
termination wiring
• Compact size 59mm x 47mm x 20mm
• Adhesive mounting pad
O R D E R I N G D ATA
W E AT H E R R E S I S TA N T E N C L O S U R E
Description
Units
WRE/5
WRE/6
Enclosure (300mm x 400mm x 222mm)
Enclosure (350mm x 500mm x 190mm)
each
each
IP65
LOCKABLE - WITH
TWO LOCKS
FEATURES
•
•
•
•
•
•
Tough ABS construction
External fixing lugs
Lid sealing gasket
IP65 rated
WRE/5 - double door retainer and key
WRE/6 - double door retainer and key
WRE SERIES
METAL BACK
PLATE
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
APPLICATIONS
Robust weather resistant enclosure with metal
back plate. Allows the user a flexible method
for mounting electrical equipment internally or
externally, i.e. relays, transformers, batteries,
etc.
HINGED
DOOR
TEST EQUIPMENT
& TOOLS
Catalogue No.
CABLE
PROTECTION
WEATHER RESISTANT ENCLOSURES
CABLE PROTECTION
SECURITY
62
CLEAR CABLEPROTECT
10 METRES
O R D E R I N G D ATA
TIME
CONTROLS
DISABLED
FOR THE PRICE OF 9
CP5
Accepts 1 x 5mm
or 2 x 4mm cables
Catalogue No.
Fits Cable Size
CP510/CL
CP910/CL
CP1210/CL
CP502/CL
CP902/CL
CP1202/CL
1 x 5mm
1 x 9mm
1 x 12mm
1 x 5mm
1 x 9mm
1 x 12mm
Units
or
or
or
or
or
or
2 x 4mm
2 x 7mm
2 x 9mm
2 x 4mm
2 x 7mm
2 x 9mm
10m roll
10m roll
10m roll
2m pack
2m pack
2m pack
APPLICATIONS
Stage areas in clubs and pubs, exhibition stands, offices, shops, in the home and particularly in
older commercial buildings built prior to the advent of underfloor or other cable management
systems. Also useful for temporary cable runs in workshops or on construction sites. Available in
grey and clear PVC, the clear version is ideally suited to use in areas where visual appearance is
important.
PRODUCT SPECIFICATION
CP9
Accepts 1 x 9mm
or 2 x 7mm cables
TV AMPLIFIERS
Cableprotect is formed from PVC. It is split
along the length of its base to allow the
material to be installed over existing
installations without needing to disconnect
the cables.
This material has a smooth, clean, satin
finish and does not exhibit any unusual,
unpleasant odours (as normally associated
with similar ‘rubber-like’ products).
Excellent wear characteristics, abrasion
resistance and tear properties, making it the
perfect material for cable protection
systems.
CP12
Accepts 1 x 12mm
or 2 x 9mm cables
Cableprotect can then be nailed or glued
to the floor for a permanent fixing or
left unfixed if the position is temporary.
Furthermore, cableprotect can be
stripped off the temporary cable runs
and subsequently used again.
Cableprotect is available in 2 metre
lengths and 10 metre rolls. The oval
passage is designed for one cable in the
nominal size or two smaller cables side
by side.
Formulated to meet REACH regulations.
CABLE
PROTECTION
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
CABLEPROTECT - CLEAR
INTERLOCKING CABLEPROTECT
O R D E R I N G D ATA
INTERLOCKING CABLEPROTECT
IDEAL FOR
Catalogue No.
Description
Units
INTC
915mm 1 Channel Interlocking Cableprotect
each
APPLICATIONS
A simple, fast, drop-over cable protector for
use in warehouses, offices, shopping centres,
loading bays, offices, etc.
FUSES & GENERAL
PRODUCTS
TEST EQUIPMENT
& TOOLS
TRAILING CABLES
•
•
•
SUITABLE FOR
EXTREME
TEMPERATURES
•
FEATURES
• Simply ‘drop over’ cables for instant
cable protection
• Easy interlocking facility to provide
virtually any length
PRODUCT SPECIFICATION
• Large, single channel cable capacity of
39 x 12.7mm
Supplied in lengths,
• Can be used on its own or with anti-slip
915 x 133 x 19mm
rubber pads, supplied with each length,
Single Channel Capacity of 39 x 12.7mm which simply push into position
Manufactured from UV stabilised
• High visibility orange colour
polyurethane
• Low relief, slip-resistant checker plate
design
Operating temperature -40°C to +48°C
• Suitable for use with pedestrian traffic
and momentary vehicular loads
(test before use)
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
CABLE PROTECTION
SECURITY
CABLEPROTECT
63
O R D E R I N G D ATA
CABLEPROTECT - GREY
Fits Cable Size
CP909/G
CP1209/G
CP1609/G
CP502/G
CP902/G
CP1202/G
CP1602/G
1 x 9mm
1 x 12mm
1 x 16mm
1 x 5mm
1 x 9mm
1 x 12mm
1 x 16mm
Units
or
or
or
or
or
or
or
2 x 7mm
2 x 9mm
2 x 13mm
2 x 4mm
2 x 7mm
2 x 9mm
2 x 13mm
9m roll
9m roll
9m roll
2m pack
2m pack
2m pack
2m pack
DISABLED
Catalogue No.
CP9
TV AMPLIFIERS
PRODUCT SPECIFICATION
Furthermore, cableprotect can be stripped
off the temporary cable runs and
subsequently used again.
Cableprotect is available in 2 metre lengths
and 9 metre rolls. The oval passage is
designed for one cable in the nominal size
or two smaller cables side by side.
Formulated to meet REACH regulations.
CP12
Accepts 1 x 12mm
or 2 x 9mm cables
LIGHTING
CONTROLS
COMMUNICATIONS
Cableprotect is formed from PVC. It is split
along the length of its base to allow the
material to be installed over existing
installations without needing to disconnect
the cables.
This material has a smooth, clean, satin finish
and does not exhibit any unusual,
unpleasant odours (as normally associated
with similar ‘rubber-like’ products).
Excellent wear characteristics, abrasion
resistance and tear properties, making it the
perfect material for cable protection systems.
TIME
CONTROLS
APPLICATIONS
Stage areas in clubs and pubs, exhibition stands, offices, shops, in the home and particularly in
older commercial buildings built prior to the advent of underfloor or other cable management
systems. Also useful for temporary cable runs in workshops or on construction sites. Available in
grey and clear PVC, the clear version is ideally suited to use in areas where visual appearance is
important.
Accepts 1 x 9mm
or 2 x 7mm cables
INDUSTRIAL
CONTROLS &
THERMOSTATS
Retail Areas
Exhibition Stands
CABLE
PROTECTION
CP16
Accepts 1 x 16mm
or 2 x 13mm cables
TEST EQUIPMENT
& TOOLS
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
Stage Areas
TOOLS
MULTIMETERS
DM30/N
DISABLED
SECURITY
64
RUGGED
HANDHELD
UNIT
TIME
CONTROLS
DM30/N
TV AMPLIFIERS
O R D E R I N G D ATA
M U LT I M E T E R S
Catalogue No.
Description
Units
DM30/N
MT1
Digital Multimeter
Digital Multimeter
each
each
HANDY
COMPACT
UNIT
LARGE
LCD DISPLAY
FEATURES (DM30/N)
FEATURES (MT1)
•
•
•
•
•
•
•
DIODE
TEST
LIGHTING
CONTROLS
COMMUNICATIONS
INDUSTRIAL
CONTROLS &
THERMOSTATS
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
LARGE
LCD DISPLAY
•
Simple to use
Rugged handheld unit
•
Large LCD display (0.5”)
•
Measures voltage, current and resistance •
Supplied with test leads, holster and
battery
Compact size 130 x 70 x 28mm
•
Complies to EN61010-1: 2010
•
Simple to use
Rugged handheld unit
Large LCD display (1”)
Measures voltage, current, resistance,
capacitance, frequency, temperature
and hFE transistor gain
Diode test
Supplied with 9V battery, outer storage
case, impact resistant holster, featuring
integral folding, angled desk stand, test
leads, thermocouple lead with plug
termination and plug-in adaptor for
use with thermocouple, capacitance and
transistor gain measurements
• IEC-1010 CAT II
TECHNICAL SPECIFICATION
Catalogue No.
DM30/N
DC Voltages - 5 settings to 500V
DC Voltages - 5 settings to 1000V
4
DC Currents - 4 settings up to 10A
4
DC Currents - 4 settings up to 5A
AC Voltages - 200V, 500V
AC Voltages - 5 setings to 700V
4
Resistances - 5 settings up to 2000K ohms
- 7 settings up to 200M ohms
4
_
Temperature - 200C to 10000C
4
Continuity - Buzzer sounds if low resistance
< 30 ohms
Diode Test
4
Capacitance - 5 settings 2ῃF to 20μF
4
MT1
4
4
4
4
< 30 ohms
4
MT1
FLEXI INSPECTION CAMERAS (CAM5)
O R D E R I N G D ATA
CAM5
WATERPROOF
CAMERA HEAD
FLEXI INSPECTION CAMERAS
Catalogue No.
Description
Units
CAM5
2.4” LCD Flexi Inspection Camera
each
APPLICATIONS
Remote inspection of areas that are difficult to see with the naked eye, such as in pipework,
cavities, loft areas, cylinder chambers and tanks and for use in laboratories, workshops etc.
BUILT-IN LED
CAMERA PROTECTIVE
LIGHTS CARRY CASE
FEATURES
• 2.4” TFT LCD Screen (CAM5)
• Water resistant camera head, suitable
for contact with non-acidic fluids
• Built-in, variable brightness LED
camera lights
• 1 metre (approx) flexible camera lead
with 10mm dia. probe head
• Video-out connection cables allow
real-time viewing or video recording
• Powered by 4 x AA batteries (supplied)
• Housed in a protective carry case
EACH KIT CONTAINS
• Hand held monitor/control unit
• 1m (approx) flexible probe fitted with
camera
• Phono TV lead
• Protective carry case
• USB lead (CAM6)
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
TOOLS
65
SECURITY
MULTI-SIZE HOLE CUTTERS & BLADE
HSO3
DISABLED
HSO1
TIME
CONTROLS
Impact-resistant
transparent cowl
TV AMPLIFIERS
Blade
Drilling head
LIGHTING
CONTROLS
HS SERIES
O R D E R I N G D ATA
M U LT I - S I Z E H O L E C U T T E R S
Cat. No.
Description
Units
each
each
each
APPLICATIONS
Recessed lighting, ceiling speakers, dry lining boxes etc.
INDUSTRIAL
CONTROLS &
THERMOSTATS
HS01/NB Multi-Size Hole Cutter. 30mm to 163mm
HS03/NB Multi-Size Hole Cutter. 30mm to 260mm
HSB/4D Universal Blade - Carbide Tip
COMMUNICATIONS
To adjust cutting thickness
PRODUCT SPECIFICATION
CEILING
SPEAKER
Model HS03/NB will cut holes from
30mm to 260mm, ideal for installers of
ceiling speakers and recessed lighting.
1 x universal metal blade with carbide tip
supplied.
All models are fitted with a transparent
cowl to collect dirt, also prevents chips from
injuring user. The multi-size hole cutter can
be used with either powered, variable
speed hand drills or drill presses. Models
come complete in carrying case and
counterbalance weights to reduce vibration.
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
IDEAL FOR DOWNLIGHTERS
& CEILING SPEAKERS
TEST EQUIPMENT
& TOOLS
DOWNLIGHT
Multi-size round hole cutters with adjustable
radius arm, are designed for cutting holes in
plywood, plasterboard and acrylic sheets up
to 25.4mm thick. 50mm depth can be
achieved when drilling from both sides.
Aluminium, brass and metal sheets can be
cut up to 1mm deep using universal cutting
blade.
Model HS01/NB will cut holes from 30mm
to 163mm. Very popular for electricians
installing downlights. 1 x universal metal
blade supplied (HSB/4D).
CABLE
PROTECTION
PROTECTIVE
COWEL
STOPS DUST
AND DEBRIS
GENERAL PRODUCTS
66
SECURITY
BOLLARD LIGHTS (LB50/LB75/LB100)
O R D E R I N G D ATA
DISABLED
BOLLARD LIGHTS
LB100 - LB100S
LB75
IP55
SUPER BRIGHT
SON VERSION
AVAILABLE
1000mm
500mm
each
each
each
each
each
• Attractive cast aluminium body,
available in black finish
• Vandal resistant fittings
• Weather resistant to IP55
• Available in three heights, 500mm,
750mm and 1000mm
• All 3 heights designed to accept 18W
energy saving E27 lamps
(not supplied)
• 1000mm SON version also available
with fitted control gear to accept
70W SON lamp (not supplied - use E27
elliptical with integral ignitor)
• Easily secured to wood or concrete.
For optimum security a ‘J’ bolt kit is
available for fixing in unset concrete
(ERL Cat No. LBJB)
O R D E R I N G D ATA
TRANSFORMER
IDEAL FOR BELL
TRANSFORMER
APPLICATIONS
INDUSTRIAL
CONTROLS &
THERMOSTATS
CABLE
PROTECTION
Units
500mm Black E27 Bollard Light
750mm Black E27 Bollard Light
1000mm Black E27 Bollard Light
1000mm Black 70W SON Bollard Light
‘J’ Bolt Kit for fixing in soft concrete
TRANSFORMER - MULTIVOLT
COMMUNICATIONS
LIGHTING
CONTROLS
TV AMPLIFIERS
LBJB
Catalogue No.
Description
Units
T4812/N
Multivolt Transformer
each
T4812/N FEATURES
• 1A rating at 12V AC
• Easy to Install
• Self resetting overload protection
• 4, 8 and 12V output
• Surface Mounting
• Double insulated
T E C H N I C A L S P E C I F I C AT I O N
T4812/N
Cat. No.
T4812/N
Height Width
(mm) (mm)
81
57
Depth
(mm)
43
Input
Voltage
Output
Voltage
230V AC 4V @ 2A, 8V @ 1.5A, 12V @ 1A
POWER SUPPLY IN-LINE SWITCH-MODE
GREATER EFFICIENCY & LOWER
HEAT GENERATION
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
Description
LB50
LB75
LB100
LB100S
LBJB
APPLICATIONS
Ideal for security or general ambient lighting in car and vehicle parks, patios, courtyards,
foyers and driveways.
FEATURES
TOUGH
HOUSING
750mm
TIME
CONTROLS
LB50
Catalogue No.
O R D E R I N G D ATA
I N - L I N E S W I T C H - M O D E P O W E R S U P P LY
Catalogue No.
Description
Units
PS1A25SM12
1.25A 12V In-line Switch-Mode Power Supply
each
APPLICATIONS
For use with a variety of products that require a DC voltage of 12V either using the adaptor
plug or wiring directly to the product
FEATURES
PS1A25SM12
• Switch-mode type of power supply
which offers greater efficiency and
lower heat generation
• 1.25 Amp regulated output
• 12V DC output voltage
• Fitted with approx 420mm mains lead,
3A fused BS1362 plug and approx
820mm flylead with moulded plug
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
GENERAL PRODUCTS
67
NEW SWITCH MODE VERSIONS
O R D E R I N G D ATA
SECURITY
POWER SUPPLIES
S E C U R I T Y P O W E R S U P P LY W I T H B AT T E R Y B A C K - U P
Description
Units
PS12/1
PS12/2
PS12/3
PS12/5
PS5A/12V
PS24/1BB
PS24/1
1 Amp 12V (13.8V) DC Switch Mode Power Supply
2 Amp 12V (13.8V) DC Switch Mode Power Supply
3 Amp 12V (13.8V) DC Switch Mode Power Supply
5 Amp 12V (13.8V) DC Switch Mode Power Supply
5 Amp 12V (13.8V) DC Switch Mode Power Supply
1 Amp 24V (27.6V) DC Switch Mode Power Supply
1 Amp 24V DC Power Supply-No Battery Back-Up
each
each
each
each
each
each
each
LED
DISABLED
Catalogue No.
TO SHOW
STATUS
• All units (excl PS24/1) offer an
additional reserve capacity for
trickle charging the back-up battery
7AH max (not supplied)
• Full load current at high ambient
temperature (+40°C)
• Mains present and fault/fuse blown
LED indicators
• Short circuit and mains transient
protection
• Suitable for wall mounting, enclosure
incorporates knockouts
Dimensions (mm)
250x215x80
250x215x80
250x215x80
330x330x80
225x195x80
330x275x80
250x215x80
Catalogue No.
Description
Units
MPSD312/N
Regulated DC Power Supply
each
APPLICATIONS
Suitable for powering a wide variety of DC voltage products, either using the adaptor plugs or
by wiring directly to the product.
USE WITH
ADAPTORS OR CAN
BE HARD WIRED
MPSD312/N
EACH KIT CONTAINS
2250mA regulated output
Switchable 3, 4.5, 5, 6, 7.5, 9, 12V DC output voltages
Fitted input and output leads
Reversible polarity
Indicator LED
Can be hardwired
Fitted with moulded plug
• In line power supply
• Adaptor plugs (6)
• Fitted 13A plug
3, 4.5, 5, 6, 7.5,
9 AND 12V DC
REGULATED
MULTI VOLTAGE
CABLE
PROTECTION
•
•
•
•
•
•
•
2.25A
OUTPUT
O R D E R I N G D ATA
U N I V E R S A L P L U G - I N P O W E R S U P P LY
Catalogue No.
Description
Units
PS312
Universal Plug-in Power Supply
each
7 selectable output voltages - 3, 4.5, 5, 6, 7.5, 9, 12V DC
Supplied with 6 types of output lead connectors
600mA regulated output
Reversible polarity
Indicator LED
REGULATED
UNIVERSAL PLUG-IN
MULTI VOLTAGE
3, 4.5, 5,
6, 7.5, 9
AND 12V DC
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
•
•
•
•
•
PS312
TEST EQUIPMENT
& TOOLS
PS312 APPLICATIONS
For use with low power products i.e. radios, stereos, calculators, clocks, small toys etc.
FEATURES
INDUSTRIAL
CONTROLS &
THERMOSTATS
FEATURES
AVAILABLE WITH
UPTO 5 AMP
RATING
COMMUNICATIONS
O R D E R I N G D ATA
M U LT I V O LTA G E D C P O W E R S U P P LY
SUITABLE FOR
ELECTRIC LOCKS,
DOOR ENTRY
SYSTEMS &
ACCESS CONTROL
LIGHTING
CONTROLS
TECHNICAL SPECIFICATION
Regulated Amperage
Output Voltage
1
13.8V DC
2
13.8V DC
3
13.8V DC
5
13.8V DC
5
13.8V DC
1
27.6V DC
1 (Unregulated)
22-30V DC
Catalogue No.
PS12/1
PS12/2
PS12/3
PS12/5
PS5A/12V
PS24/1BB
PS24/1
PS12 SERIES
TV AMPLIFIERS
• All PS12 models and PS24/1BB are
switch mode power supplies, offering
greater efficiency, lower heat
generation and lower power
consumption
TIME
CONTROLS
APPLICATIONS
High quality power supplies for use with security and access control equipment.
FEATURES
GENERAL PRODUCTS
PUMP SUBMERSIBLE 550W
PASSES
DEBRIS
PUMPS
UP TO
9500
LITRES
UP TO
35mm
DIAMETER
PER HOUR
IP68
TV AMPLIFIERS
TIME
CONTROLS
DISABLED
SECURITY
68
SPV550
COMMERCIAL
USE
CABLE
PROTECTION
TEST EQUIPMENT
& TOOLS
FUSES & GENERAL
PRODUCTS
Catalogue No.
Description
Units
SPV550
Submersible Pump 550W
each
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
Commercial
Cellars
Pools
Garden ponds
Anywhere water needs to be removed
Agricultural
Garden Centres
Power supply
Power consumption
Delivery rate max.
Delivery height max.
Immersion depth max.
Water temperature max.
Hose connection
Foreign bodies up to
Switching point high: ON
Switching point high: OFF
•
•
•
•
•
•
•
•
•
Easy to plug in
Pumps dirty or clean water
Passes particles up to 35mm diameter
Automatic ON/OFF Floating Switch
Robust
Low maintenance
IP68 rated
Integral carry handle
10m mains lead with 3-pin plug
TECHNICAL DATA
230V AC
550 Watt
9500 l/h
7m
8m
35˚C
25/32mm dia with threaded end
dia. 35mm
Approx. 35cm
Approx. 5cm
SPACE HEATERS - COMMERCIAL
O R D E R I N G D ATA
C O M M E R C I A L S P A C E H E AT E R S
ROBUST
Catalogue No.
EK2001
Description
Units
2kw fan heater
each
METAL BODY
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
IDEAL FOR
O R D E R I N G D ATA
SUBMERSIBLE PUMP 550W
RAPID
FAN ASSISTED
HEATING
FOUR
EK2001
THERMAL
PROTECTION
CUT-OUT
SETTINGS
2kw
OUTPUT
APPLICATIONS
Ideal for quickly heating indoor areas in
workshops, garages, factories, warehouses
and similar applications.
PRODUCT SPECIFICATION:
Operational Voltage: 230V – 50Hz
Dimensions: 215 x 195 x 320mm
FEATURES
• Rapid fan assisted heating
• Robust steel construction with insulated
carrying handle.
• Adjustable heat output with 4 settings :
2kw – OFF, 650W ouput, 1.3kw output
and full power (2kw)
• Fitted with a stepless variable
thermostat to maintain the room
temperature at a predetermined level
• Self-resetting thermal protection cut-out
to prevent overheating
• Heavy duty heater elements and metal
bladed fan
• 1.75m cable and plug
TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected]
GENERAL PRODUCTS
O R D E R I N G D ATA
C O N T R A C T O R F U S E PA C K
Cat No.
Description
Units
CFP
Contractor Fuse Pack
each
18
DIFFERENT
TYPES
OF FUSE
DISABLED
APPLICATIONS
Storage box with spill proof latches, ideal for Electrical/Electronics engineers who need a selection of
commonly used fuses.
EACH KIT CONTAINS
SECURITY
FUSE CONTRACTOR PACK
TIME
CONTROLS
10 of each of the following fuses:
• Plug Fuses: 3A, 5A, 13A (manufactured to comply with BS.1362)
• Glass Anti Surge: 1A, 1.25A, 1.6A, 2A,2.5A, 3.15A, 5A, 6.3A, 10A (20mm x 5mm)
(manufactured to comply with BS.EN60127, IEC127)
• Glass Quick Blow: 500mA, 1A, 2A, 2.5A, 3.15A, 5A (20mm x 5mm)
(manufactured to comply with BS.EN60127, IEC127)
CFP
O R D E R I N G D ATA
GF520T
FUSES
GF520F/500
GF520F/1A
-
10
10
-
GF520F/2A
GF520F/2A5
GF520F/3A15
GF520F/5A
GF520F/6A3
-
10
10
10
10
10
-
20 x 5mm
Anti-Surge
Glass
Pack
size
GF520T/500
GF520T/1A
GF520T/1A25
GF520T/1A6
GF520T/2A
GF520T/2A5
GF520T/3A15
GF520T/5A
GF520T/6A3
GF520T/8A
GF520T/10A
10
10
10
10
10
10
10
10
10
10
10
GF520F
Actual size 20 x 5 mm
COMMUNICATIONS
Pack
size
Packs of 1000 available (POA). Manufactured in accordance with BS-EN60127, IEC 127.
Other ratings to order. (Minimum quantity 1,000 Bulk)
O R D E R I N G D ATA
DOMESTIC CONSUMER UNIT FUSES
CUF15
Description
Dimensions (mm)
Units
CUF15
CUF20
CUF30
15A Fuse Link
20A Fuse Link
30A Fuse Link
26 x 10.32 Ø
26 x 10.32 Ø
29 x 12.7 Ø
per 10
per 10
per 10
CUF20
CARTRIDGE FUSES (BS1362)
CARTRIDGE FUSES
Cat. No.
Rating
PF3/1000
PF3/1000
PF5/1000
PF13/1000
3A
5A
13A
Units
per 1000
per 1000
per 1000
PF13/1000
SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829
FUSES & GENERAL
PRODUCTS
PLUG FUSES
The comprehensive range of cartridge fuses complies with BS1362 and are ASTA approved.
Rated Voltage: 240 AC
PF5/1000
TEST EQUIPMENT
& TOOLS
O R D E R I N G D ATA
CABLE
PROTECTION
CUF30
1000 Fuses (1 bag of 1000)
INDUSTRIAL
CONTROLS &
THERMOSTATS
CONSUMER UNIT FUSES (BS1361)
Catalogue No.
LIGHTING
CONTROLS
500mA
1A
1.25A
1.6A
2A
2.5A
3.15A
4A5A
6.3A
8A
10A
20 x 5mm
Quick-Blow
Glass
TV AMPLIFIERS
ELECTRONIC FUSES
Rating
69
INDUSTRIAL
CONTROLS &
THERMOSTATS
COMMUNICATIONS
LIGHTING
CONTROLS
TV AMPLIFIERS
TIME
CONTROLS
DISABLED
SECURITY
INDEX
SECURITY
Pages 2 - 30
DOOR ENTRY SYSTEMS
AUDIO / CODED ACCESS / PROXIMITY /
VIDEO
DOOR RELEASE LOCKS
DOOR RELEASE SWITCHES
DOOR RETAINERS
ASSISTANCE SYSTEMS
ENTRY ALERT SYSTEMS
BEAM KITS
EMERGENCY EQUIPMENT
ALARMS / CONTROLS
PRESSURE MATS
DISABLED
Pages 31 - 34
ELECTRIC DOOR OPENING/CLOSING SYSTEM
DOOR RELEASE SWITCHES
ASSISTANCE SWITCHES
TOILET ALARM SYSTEMS
INDUCTION LOOP SYSTEMS
TIME CONTROLS
Pages 35 - 40
IMMERSION HEATER/LIGHTING TIMESWITCHES
SOLAR TIMESWITCHES
DIGITAL TIMESWITCHES
ANALOGUE TIMESWITCHES
ENERGY MEASUREMENT METERS
STAIRCASE LIGHTSWITCHES
COMMERCIAL TIMESWITCHES
CLOCKS
RADIO CONTROLLED / COMMERCIAL
AMPLIFIERS /
DISTRIBUTION
Pages 41- 44
DISTRIBUTION AMPLIFIERS
DISTRIBUTION SYSTEMS
TV/DATA DISTRIBUTION SYSTEMS
CAT 5E PATCH PANELS
WALL PLATES
TRACE HEATING CABLE
COMMAND STATIONS
EMERGENCY STOP/START
CONTROL STATIONS
ISOLATORS
ROLLER SHUTTER DOOR CONTROL
RELAYS & BASES
FIRE ALARM RELAYS
ENCLOSURES
WEATHER RESISTANT
LIGHTING CONTROLS
Pages 45 - 51
PIR MOTION
CONTROLS / DETECTORS
PHOTO ELECTRIC CONTROLS
KEY CARD ENTRY/ENERGY CONTROL KITS
KEY CARD SWITCHES
DIMMER SWITCHES
SLIDE/TOUCH/REMOTE CONTROL
ROPELIGHT
LED/FLEXIBLE
COMMUNICATIONS
Pages 52
CABLE PROTECTION
Pages 62 - 63
CABLE PROTECT
GREY/CLEAR
TEST EQUIPMENT &
TOOLS
Pages 64 - 65
FLEXI INSPECTION CAMERAS
HOLE CUTTERS
MULTIMETERS
INTERCOM SYSTEMS
THERMOSTATS / HEATING
& INDUSTRIAL CONTROLS
Pages 53 - 61
FROSTATS
THERMOSTATS
CYLINDER/PIPE/DIGITAL/
RADIO CONTROLLED
CENTRAL HEATING PROGRAMMERS
THERMOSTATS
FUSES AND GENERAL
PRODUCTS
Pages 66 - 69
POWER SUPPLIES
FUSES
FUSE PACKS
BOLLARD LIGHTS
TRANSFORMER
PUMP SUBMERSIBLE
HEATER
All goods sold subject to Standard Conditions of Sale. Our policy is one of continuous improvement and we reserve the right to alter product specifications in this catalogue.
All information in this catalogue is given in good faith and believed to be correct at the time of publication January 2017.
Prices shown exclude VAT and are subject to change without notice.
E & O.E. © COPYRIGHT OF ELECTRO-REPLACEMENT LIMITED 2017
TEST EQUIPMENT
& TOOLS
CABLE
PROTECTION
Sales Orders
Tel: 01923 255344
ELECTRO-REPLACEMENT LIMITED
1 Moor Park Industrial Centre,
Tolpits Lane, Watford,
Herts WD18 9EU
Email: [email protected]
Fax: 01923 255829
Technical Advice Service
Monday to Thursday
Tel: 01923 220277
Email: [email protected]
FUSES & GENERAL
PRODUCTS
Website:
www.electroreplacement.com
Visit our website for more information
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement