advertisement
▼
Scroll to page 2
(1)Gain setting H : High frequency L : Low frequency (4)Alarm Set Status Water temp alarm Arrival alarm Speed alarm XTE alarm *The number shows the (5)Status of [F1]/[F2] key assignment present set value of gain. Image speed Zoom range Interference rejection Zoom start Color rejection A scope Noise rejection White line (2)Range mode Shift Background color R:M : Manual (6)Status of [EVENT] key assignment R:A : Auto range Store position Fishing hot spot R:AS : Auto shift Store image (3)Power Voltage (8)Rainbow pattern (7)Time mark (1) (2) (3) (4) (5)(6) L:6.0 H:6.0 R:M 12.0V (7) Oscillating line (8) Schools of fish Bottom Select the setting of preset function ([F1]key / [F2]key) Depth scale The function differs depending on the [F1/F2 key setting]. In case of [Image speed]: Image Speed Speed1 Speed2 Press Speed3 Speed4 Press Depth Press Stop Speed5 (1/1) Press Speed6 Speed7 Speed8 Speed9 *Select by performing either operation. Preset the destination / Preset the image ([EVENT] key) Rotate *By continuously pressing the [F1]/[F2] key, a function assigned to each key can be selected. Depending on the [EVENT key set], the function differs. In case of [Store pos]: Select the range ([ RANGE ] key) Store the destination. Range Auto range 5.0 10.0 20.0 50.0 100 160 300 500 Auto shift Press Press Press In case of [Store image]: Press Store the image of echo sounder. Press *Select by performing either operation. Press *The navigation data such as GPS is necessary. Rotate Display the menu ([MENU] key) Select the display menu ([DISP] key) Disp NAV1 Press Normal (H) Press Press Zoom (H) Press Dual freq Zoom (L) Normal (L) Press NAV2 *Select by performing either operation. Adjust D.range Display1 Display2 Alarm1 Alarm2 NAV Image System Freq Next Image speed Speed5 Strong 0% 0 Auto IR Color rejection Noise rejection TX power Gain (TD) Pulse width Band width D.Range Return Middle Middle 24dB Press *The menu closes. *The menu appears. Rotate Gain adjust / TVG select ([Knob] key) Power on/Power off (【BRILL】 key) Power on. Power off. Gain Press or Rotate Keep pressing for more than 3 seconds. Press Adjust the brilliance ([BRILL] key) Adjust 9.0 Rotate Select Press TVG Weak Medium Strong Press Panel brill Auto Press 10 Rotate Press Press Lcd brill 10 Rotate Press *Every time when pressing the [Brill] key,the item is alternately displayed. *[GAIN (HF) Knob] key can adjust high frequency. *[GAIN (LF) Knob] key can adjust low frequency. Press 0093114104-03 How to operate the menu Close the menu Open the menu Select the menu name Change the set content Select the set item The selection and the change of set content can be performed by rotating the knob. Close the menu 1st time: The menu returns to the set item. 2nd time: The menu returns to the menu name. Function of Adjust Set Menu Adjust D.range Display1 Display2 Alarm1 Alarm2 NAV Image System Freq Next Image speed IR Color rejection Noise rejection TX power Gain (TD) Pulse width Band width D.Range Return Speed5 Strong 0% 0 Auto (1) (2) (3) (4) (5) (6) Middle Middle 24dB (1) Change the image speed. The image speed becomes slow in order of [Speed1]=>[Speed2]=>•••=>[Speed9]. When [stop] is selected, the image stops. (2) It rejects the interference with other echo sounder. When [Strong] is selected, the effect of rejection is strong. (3) It rejects the weak noise appeared on the display. The greater the number is, the stronger the rejection becomes. (4) It rejects the speck-like noise appeared on the entire image. The greater the number is, the stronger the rejection becomes. (5) It sets the TX power. (6) The reduction in sensitivity due to signal attenuation in Gain (TD) use and so on can be corrected. You can make numerical value bigger at the time of lack of sensitivity. Function of display range set menu Adjust D.range Display1 Display2 Alarm1 Alarm2 NAV Image System Freq Next Shift step Zoom type Zoom range Zoom start Disp width Range preset Return 1m BTM. 10.0m 0m Center (1) (2) (3) (4) (5) (6) (1) It sets the quantity of movement of shift. (2) It selects the kind of the zoom type. (3) It sets the range of image selected in (2). (4) It sets the zoom starting position of image set in (2). (5) It selects the disp width. (6) It presets the range. Zoom Zoom start Zoom range Preset of Range Registration of the range can be easily changed with following operation. Preset the set value suitable for you purpose. Press Range Auto range 5.0 10.0 20.0 50.0 100 160 300 500 Auto shift Range 5.0 Press Press Press Press Press Rotate *Select by performing either operation. Rotate *Select by performing either operation. Press 0093114104-03
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project