DVI KVM Matrix Switches DVICenter 7.1

DVI KVM Matrix Switches

Matrix Switches for the simultaneously operation of multiple computers via several consoles

HETEC Datensysteme GmbH

Industriestraße 17

D-82110 Germering, Germany

Tel.: +49 (0)89 - 89 43 67 - 0

Fax: +49 (0)89 - 89 43 67 - 99

Email: [email protected]

Web: www.hetec.de

The company

Leading the way in digital KVM

Guntermann & Drunck is regarded as a leading manufacturer of digital and analogue KVM equipment used in control rooms in air traffic control, broadcast studios, on ships and to monitor industrial processes.

With a powerful portfolio consisting of KVM extenders, switches and matrix switches, G&D’s users get real added value. G&D provides the broadest KVM product portfolio at the market. Even with different features, all

G&D products are compatible and can be combined. Our KVM solutions optimise the application of IT equipment and improve the working conditions for humans and computers.

No matter where KVM devices are installed, there’s always one main requirement - robust, reliable, user-friendly and easy to operate KVM systems that can be adapted to future requirements and grow with your demands.

By short lines of communication G&D is able to solve challenging requirements and tailor systems to our customers’ needs. We keep direct contact to our customers and are personally available. We are proactive and always keep an eye on the trends in the industry. Functionalities required by our customers are quickly implemented into our products. Our success can only be measured with our customers’ satisfaction.

Trust in G&D for your optimal KVM solution.

©All brandmarks are the property of their respective owners. Subject to change without notification. Illustrations are only examples. Descriptions are usually based on the the max. stage of expansion.

www.gdsys.de

// 2

ControlCenter-Digital 7.4


The System

With the modular KVM matrix switch ControlCenter-Digital, users can operate up to 287 computers over a number of simultaneous consoles, consisting of keyboard, monitor and mouse.

Depending on the chosen variation, the available 288, 160 or

80 dynamic ports can be connected either as computer or as user port.

The ControlCenter-Digital comes with a modular setup consisting of:

• Input/Output cards (I/O cards),

• Switch card with the central processor unit,

• Controller card that holds the “logic”,

• Three redundant power packs

• Two fan boards

The system supports CAT cables and fibre optics even in mixed mode. The Dynamic Port technology enables users to expand and adapt the ControlCenter-Digital even in existing

IT installations.

A working system consists of at least:

• 1 × central module ControlCenter-Digital with controller

card and switch card

• 1 × I/O card

• 1 × computer module DVI-CPU

• 1 × user module DVI-CON

The ControlCenter-Digital is compatible with all devices of the DVICenter series. Existing KVM installations can be

Highlights / System

Modularity

• Fully modular setup, replaceable components

• The backplane contains four different types of cards: I/O

CAT cards, I/O Fibre cards, switch card and controller card

• I/O CAT cards, I/O Fibre cards, power supplies and fan boards are hot pluggable/hot swappable

• Supports CAT cables and fibre optics in mixed mode

• Switch card and controller card can be separately replaced

• The system can be adapted or expanded; system components like redundant power supplies can be replaced even during operation

Video

• DVI single-link video resolution up to 1920 × 1200 @ 60Hz

(at user modules also VGA 1280 × 1024 @ 85Hz)

• Integration of DisplayPort thanks to DP-CPU & DP-CON

• Analogue video sources (VGA) in the matrix also possible

• HDIP2 (High Dynamic Image Processing 2.0) for highest video and mouse quality in all applications

• Transmission up to 140 m over CAT cable at maximum resolution between all modules

• Transmission up to 10,000 m via fiber optics at maximum resolution

Signals

• Single-Link DVI and DisplayPort, (Dual-Link DVI in preparation)

• Switches bidirectional audio signals

• Supports PS/2 and USB keyboard/mouse

• RS232 & USB 2.0 transparent

• complies with USB 3.0 devices www.gdsys.de

CAT

cable

Fiber

optics

VGA

LAN

Moni tor

USB

2.0

RS

232

WEB

If seamlessly implemented in this system.

The ControlCenter-Digital switches the following signals:

• Keyboard/mouse [USB and PS/2]

• Video [DVI Single-Link]

• DisplayPort

• VGA video sources possible

• Stereo audio, bidirectional

• RS232 & USB 2.0 transparent

Kompatibility

• ControlCenter-Digital is compatible with all DVICenter system components

• DVICenter can be fully integrated into the system as a slave

Expansion

• Expandable to up to 4,039 computers when connected to

49 workstations

• Expansion of the switchable signals either through

port grouping or stacking

• Multi-monitor workstations

• Firmware expansion for multi-monitor consoles (TS function)

• Innovative CrossDisplay-Switching enables users to switch between channels by using the mouse

• Firmware expansion for moving/getting own or external screen contents (

Push-Get function)

• Firmware expansion for preparing the switching over network ( IP-Control-API)

• Expansion of the user range: access to computer over multiple ControlCenter-Digital-Cluster due to

Dynamic-UserCenter32 (full redundancy)

DynamicPorts

• The ControlCenter-Digital dynamic ports can be configured as computer or user port

• Freely configurable number of computer and user ports

• Automatic device detection: ControlCenter-Digital identi- fies automatically if a computer module or console module is connected

// DC 3



Highlights / Monitoring&SNMP

Function: receive ControlCenter-Digital status info

Operation via: web interface/SNMP

Sphere of effectiveness: 1 cluster

The Monitoring feature enables you to detect the system status of G&D devices. The web interface provides information that can be sent (SNMP trap) or queried (via SNMP GET) as well. The information section shows the device configuration settings and the detected status values. Monitoring values can also be sent to AMX or Crestron media control.

Among others, the following status values can be monitored:

• Status matrix (online/offline)

• Status I/O cards (online/offline)

• Switchboard function (ok/failure)

• Device main power supply (on/off)

• Device redundant power supply (on/off)

• Device temperature (°C)

• Network interfaces (Up/Down)

• Stackbus interfaces (active/inactive)

• Fan rate (RPM)

• Current (A)

• Voltage (V)

• Status of power packs (on/off)

Furthermore, the computer modules and the user modules can be also monitored, e. g.:

• Status (On/Off)

• Device temperature (°C)

• Main and redundant power supply (On/Off)

• Keyboard/mouse connection (On/Off)

• Video signal connection (On/Off)

Status changes (e.g. power on/off) and exceeding defined threshold values (e.g. temperatures) highlight these values in red in the web interface. The administrator will also be notified based on predefined network parameters.

Among others, the following user activity values can be sent via Syslog and/or SNMP-Traps:

• User login/-out on consoles

• Failed user logins

• Connected/disconnected targets

• Failed target connections www.gdsys.de

// DC 4



Features

Video

• DVI single-link video resolution up to 1920 × 1200 @ 60Hz

• DisplayPort video resolution up to 1920 × 1200 @ 60Hz

• Integration of analogue video sources (VGA) also possible

• Colour mode DVI 24 bits

• Multi-channel Video

• E-DDC support

• System transmits a total length of 560 m over CAT cables

Computer module to central module 140 m

- Computer module to central module 140 m

- Central module to user module 140 m

- Central module to other central modules

(up to 2 ×) 140 m

• Over fibre optics: up to 10,000 m between two system components possible (in preparation)

Audio

• Bidirectional transmission of audio signals

• Resolution 24 bits digital

• Bandwidth 22 kHz / refresh rate 96 kHz

Device

• Accesses only the computers‘ standard interfaces and requires no software installation

• The backplane contains four different types of cards: I/O

CAT cards and I/O Fibre cards to connect the cabling at both the computer and the console side, the switch card with the central processor unit and the controller card that holds the logic

• Switch card and controller card are modular and can be

replaced

• Three redundant power packs that can be replaced during operation

• I/O CAT cards, I/O Fibre cards, power supplies and fan boards are hot-pluggable and hot-swappable

• Device cascading enables even large installations with thousands of computers

• Shipped in an aluminium housing for best interference

immunity

Network / Communication

• Access protection and user administration can be switched off

• Auto-recognition and visualization of the system structure

• Two network ports

• Configuration over web interface

• Central update of all DVICenter components over network

• Text-based media control over TCP/IP e.g. AXM and Crestron; Monitoring values can also be sent to

AMX, Crestron, VSM media control as well as KSC-

Commander

Safety

• Failover connection (in the unlikely event that the central modules should fail, you can directly connect DVI-CPU and DVI-CON to operate the system; max. distance up to 140m).

• Support of external authentication via LDAP, Active

Directory, TACACS+, Radius

• Redundant power supply

Versatile functions

Channel grouping

The ControlCenter-Digital supports multi-monitor workstations for computers with several video outputs. Here, multiple channels can easily be combined as channel groups. As always, you can administrate all functions in the Control-

Center-Digital web interface. In addition to multiple screens, you can include other signals in these groups. The system also transmits and switches transparent USB2.0 signals as well as RS232.

Example:

To transmit a second video signal and a USB 2.0 signal of the same computer, in addition to the DVI-CPU computer module, a second DVI-CPU module (second video channel) and a U2-CPU module (USB2.0/RS232) must be connected to the computer. In addition to the DVI-CON user module, the DVI-CON-Video (second video channel) and a U2-CPU module should be connected. Therefore with the Control-

Center-Digital, you can switch various computer modules of one computer or various user modules of one console at the same time.

the master system. Now you can create multi monitor workstations and assign consoles with USB or RS232 channels.

Example: All ports of a ControlCenter-Digital matrix switch are occupied with 50 consoles accessing 238 computers. However, each console requires five channels: 4 video signals per computer and transparent USB 2.0. Stacking 5 ControlCenter-

Digital 288 provides you with the required 1440 ports.

USB-Pinning

If several ControlCenter-Digital ports are grouped as a multichannel configuration, the newest USB pinning function enables you to hold the USB transmission on the current computer even if the user switches to another channel. In this case the

USB transmission is not interrupted, but transmitted to the end

CrossDisplay-Switching (see page 34)

Switching by using the mouse

Stacking function

The stacking function enhances the system’s flexibility even further. The feature increases the number of ports by combining up to ten ControlCenter-Digital devices via bus port.

The ports of the stacked switches are switched in parallel to

Screen-freeze-function

If the display loses the video signal due to a broken connection or a problem with the computer‘s graphics card, the

Screen-Freeze function „freezes“ the image last displayed on the monitor. This state is highlighted by a red semi-transparent frame. Meanwhile, the current time and the downtime of the video signal is displayed. The function is automatically cancelled when the display receives an active video signal.

www.gdsys.de

// DC 5



Application scheme

Example:

The computers are housed in a central control room, separated from the users. in the technical area, an administration console allows the administrator to operate the computers.

The ControlCenter-Digital enables the operator to use all common video signals in one matrix switch: DVI Single-

Link, DisplayPort 1.1., VGA, and DVI

Dual-Link (in preparation). In addition to this, the desks can be provided with both digital and analog monitors.

Two ControlCenter-Digital (1 x Master,

1 x slave) connect the user modules and the computer. The matrix comes with the automatic device detection for user and computer modules. The connected devices can be automatically identified.

A dedicated CAT-x-link integrates the productive workplaces into the operational concept (DVI-CON) where they work on the computers as if they are still at the console.

The ControlCenter-Digital 288 can be integrated into the network for configurating the device via web interface, sending messages to a Syslog server or using directory services. Each user module can access every computer. Flexible operation concepts can be implemented, which creates perfect conditions for both users and computers.

Use

The ControlCenter-Digital enables the flexible and decentralised operation of large and distributed IT installations. With its modular setup, a broad range of supported signals and transmission media, the ControlCenter-Digital can be applied in applications like control centres, OB vans or studios.

Quantitative and functional adjustments are easily carried out within the modular system design meeting expansion requirements.

Variants

Design

The ControlCenter-Digital 288 is shipped as desktop device.

The ControlCenter-Digital is available with 288, 160 and 80 dynamic ports (160 and 80 port variants in preparation).

www.gdsys.de

// DC 6



ControlCenter-Digital-288

left: right:

ControlCenter-Digital-288 - rear view

ControlCenter-Digital-288 - front view

Console

Type of console ports

Console ports per device

Transmission type user module

Transmission length to user module

Interfaces for user modules

Network port

Computer

Type of computer ports

Computer ports

Computer ports cascade level 1


Transmission length between cascades

Transmission type to computer module

Transmission length to computer module

Interfaces to computer module

Main power supply

Type

Connection

Voltage

Redundant power supply

Type

Connection

Voltage

Housing

Casing

Desktop (W × H × D)

Weight

Update

Process

Connection

Operating conditions

Temperature

Humidity

Conformity www.gdsys.de

ControlCenter-Digital-288

RJ45 socket

Dynamic: min. 1 - max. 287

Dedicated 1:1 CAT-x link ot fibre optics (fibre optics in preparation)

140 m (CAT)

RJ45 sockets

2 × RJ45 socket

RJ45 socket

Dynamic: min. 1 - max. 287 max. 4081 max. 4039

140 m (CAT)

Optional dedicated 1:1 CAT-x link or fibre optics (fibre optics in preparation)

140 m (CAT)

RJ45 sockets

1 × internal power pack

1 × IEC plug

AC100-240V/60-50Hz

8A - 3,4A


2 × IEC plug

AC100-240V/60-50Hz

8A - 3,4A

Anodised aluminium

435 × 9 U × 500 mm

Approx. 25 kg

Via web interface „Config Panel“

Via network port

+5 to +45 °C

< 80% non-condensing

CE, RoHs

// DC 7




left: right:

ControlCenter-Digital-160 - rear view

ControlCenter-Digital-160 - front view

Console

Type of console ports

Console ports per device

Transmission type user module

Transmission length to user module

Interfaces for user modules

Network port

Computer


Computer ports



Transmission length between cascades




Main power supply

Type

Connection

Voltage


Type

Connection

Voltage

Housing

Casing


Update

Process

Connection


Temperature

Humidity


ControlCenter-Digital-160

RJ45 socket


Dedicated 1:1 CAT-x link ot fibre optics (fibre optics in preparation)

140 m (CAT)

RJ45 sockets

2 × RJ45 socket

RJ45 socket

Dynamic: min. 1 - max. 159 max. 3854 (by the use of 6 consoles) max. 3557 (by the use of 31 consoles)

140 m (CAT)

Optional dedicated 1:1 CAT-x link or fibre optics

140 m (CAT) or up to 10,000 m via fiber optics

RJ45 sockets


1 × IEC plug

AC100-240V/60-50Hz

8A - 3,4A


2 × IEC plug

AC100-240V/60-50Hz

8A - 3,4A

Anodised aluminium

19“ × 6 U × 500 mm

Via web interface „Config Panel“

Via network port

+5 to +40 °C


CE, RoHs

// DC 8



Computer modules

The DVI-CPU computer modules link external keyboard, video, mouse, and audio interfaces to the ControlCenter-

Digital system.

The DVI-CPUs combine signals, process them and use CAT cables to transmit the signals to the KVM matrix switch. Any

DVI-CPU has a unique ID that helps identify the device within a ControlCenter-Digital system.

In Preparation: DVI-CPU-Fiber, module to connect a computer over fiber optics (range up to 10,000 m).

NEW: DVI-CPU and DVI-CON can also be connected directly and used as extender line. Now users can operate computers placed up to 140 m away from your console.

DVI-CPU - front view

DVI-CPU

Standard variant transmitting the following signals:

• single-link DVI-D

• PS/2 + USB keyboard/mouse

• Audio (Line In / Line Out)

•

The common firmware version for DVI-CPU is compatible to Wintu3 and Wintu4 and supports the communication with

Wacom Intuos3 or 4® tablets.

The DVI-CPU is also available without a supplied AC adapter.

DVI-CPU-UC

Order the MultiPower-12 if the computer modules have to be supplied with power from a central source.

The MultiPower-12 functions as a central and external power supply for up to 12 computer modules ( DVI-CPU).

Installation:

We provide 19“ rack mount solutions facilitating the installation of DVI-CPU computer modules into a server rack.

The rack solutions are listed under KVM Accessories.

UserCenter module for connecting a computer to two

ControlCenter-Digital clusters (e.g. full redundancy) transmitting the following signals:

• single-link DVI-D



The common firmware version for DVI-CPU-UC is compatible to Wintu3 and Wintu4 and supports the communication with Wacom Intuos3 or 4® tablets.

DVI-CPU-UC - rear view

DVI-CPU-FSC & DVI-CPU-UC-FSC

DVI-CPU-FSC computer modules connect the external keyboard, video, mouse and audio interfaces to the matrix switch central module. For easier rack mounting, all interfaces at the device’s back are redirected to the front via cables.

The DVI-CPU-UC-FSC is a UserCenter module connecting a computer to two matrix switch clusters (for example to create a fully redundant system). Here, all interfaces are placed at the front side as well.

www.gdsys.de

DVI-CPU-FSC - front view

// DC 9



Computer modules

DVI-CPU-MC2

Computer module to establish multi-monitor workstations and transmitting the following signals:

• Single-Link DVI-D

• PS / 2 + USB keyboard / mouse


Using a DVI-CPU-MC2 multi-channel video computers can be now easily integrated into the ControlCenter-Digital.

The DVI-CPU-MC2 combines signals, process them, and use

CAT cables to transmit the signals to the DVICenter.

DVI-CPU-MC2 - front view

DVI-CPU-MC2-UC

UserCenter computer module for connecting a multi-video computer to two DVICenter clusters.

Transmits the following signals:



• Audio ( Line In / Line Out)

Use DVI-CPU-MC2-UC modules instead of the usual DVI-

CPU-MC2 computer modules to increase the number of multi-monitor consoles or to establish a redundant system.

Installation:

We provide 19“ rack mount solutions facilitating the installation of DVI-CPU-MC2-UC computer modules into a server rack.

DVI-CPU-MC2-UC - rear view www.gdsys.de

// DC 10



Computer modules

DP-CPU

DP-CPU is a standard module for the integration of

DisplayPort video sources into the ControlCenter-Digital matrix.

The DP-CPU combines keyboard, video, mouse, and audio signals, converts DisplayPort into single-link DVI and uses CAT cables to link them to the KVM matrix switch. Integrating the user module DP-CON the signals are provided at the remote workstation.

DP-CPU - front view

DP-CPU-UC

UserCenter module for connecting one DisplayPort computer to two DVICenter clusters.

Transmits the following signals:


• PS/2 + USB Keyboard/Mouse

• Audio ( Line In / Line Out)

Use DVI-DP-CPU-UC modules to increase the number consoles or to establish a redundant system.

DP-CPU-UC - rear view www.gdsys.de

// DC 11



Computer modules

VGA-CPU-UC

VGA-CPU-UC ist a module to connect a VGA computer to two matrix clusters. The VGA-CPU-UC combines keyboard, video, mouse, and audio signals and uses CAT cables to link them to both central modules.

Integrating the user module DVI-CON the signals are provided at the remote workstation.

The module transmits the following signals:

• VGA

• Keyboard/Mouse (USB & PS/2)

• Audio bidirectional

Resolution: VGA up to 1920 x 1440 @ 75 Hz

VGA-CPU-UC - front view

DVI-CPU-Fiber

The new DVI-CPU-Fiber lets users provide fibre optics with the

ControlCenter-Digital. The transmission length to the central module depends on the used module and is up to 10,000 m.

• DVI-CPU-Fiber(M) bridges up to 380 m

• DVI-CPU-Fiber(S) bridgesup to 5,000m

• DVI-CPU-Fiber(S+) bridges up to 10,000m

The module transmits the following signals:

• DVI single-link

• Keyboard/Mouse (USB & PS/2)

• Audio

Resolution:

DVI Single-Link up to 1920 x 1200 @ 60 Hz incl. Full-HD (1920 x 1080)

DVI-CPU-Fiber-UC - rear view www.gdsys.de

// DC 12



Computer modules

U2-R-CPU

In combination with the relevant ControlCenter-Digital components the

U2-R-CPU computer modules link external

USB 2.0 and RS232 interfaces to the matrix switch system.

A U2-R-CPU module combines and processes USB2.0 and

RS232 signals. Via CAT cabling they are then transmitted to the KVM matrix switch.

The transmission of the signals takes place transparently.

The maximum distance between the U2-R CPU module and the KVM matrix switch can be up to 140 meters.

The U2-R-CPU are distributed including external power pack.

Standard variant transmitting the following signals:

• USB 2.0

• RS232

Application

CPU module for connecting external USB2.0 and RS232 interfaces to ControlCenter-Digital.

U2-R-CPU - front view

Mounting

19“ rack mount solutions are available for optimized mounting of the U2-R-CON modules. You can find them in KVM Accessories.

Operating / Updates:

System upgrades can be managed over wizard at service socket (Mini USB TypB).

www.gdsys.de

// DC 13



DVI-CPU & DVI-CPU-UC

left: right:

DVI-CPU - front view

DVI-CPU-UC - rear view

Video

Signal type/Video

Resolution

Colour depth

Audio

Resolution

Refresh rate

Bandwidth

Transmission

Interfaces to central module

Cabling type

Transmission length

Power supply

Main Type

Connection

Voltage

Interfaces to computer

Video

Keyb./Mouse

Audio

Other interfaces

Service

Update

Mode

Casing

Total length incl. cable

Material

Dimensions (W×H×D)

Weight


Temperature

Humidity


DVI-CPU DVI-CPU-UC

single-link DVI-D

1920 × 1200 @ 60 Hz

24 bits

24 bits digital

96 kHz

22 kHz

1 x RJ45 socket 2 x RJ45 socket dedicated 1:1 connection via CAT-x cable

140 m to central module

+12VDC / 500mA via external power pack

Mini-DIN 4 socket

+12VDC / 600mA

DVI-D socket

2 × Mini-DIN 6 socket/1 × USB-B socket

2 × 3.5 mm jack socket

Mini-USB-B socket via ControlCenter-Digital Config panel

105 × 26 × 104 mm approx. 2 m anodised aluminium

105 x 26 x 104 mm approx. 240 g

+5 to +45 °C


CE, RoHs

// DC 14



DVI-CPU-FSC & DVI-CPU-UC-FSC

left: right:

DVI-CPU-FSC - front view

DVI-CPU-UC-FSC - front view

Video

Signal type/Video

Resolution

Colour depth

Audio

Resolution

Refresh rate

Bandwidth

Transmission


Cabling type

Transmission length

Power supply

Main Type

Connection

Voltage


Video

Keyb./Mouse

Audio

Other interfaces

Service

Update

Mode

Casing


Material


Weight

Dimensions front panel (W × H)


Temperature

Humidity


DVI-CPU-FSC DVI-CPU-UC-FSC

single-link DVI-D

1920 × 1200 @ 60 Hz

24 bits

24 bits digital

96 kHz

22 kHz




Mini-DIN 4 socket

+12VDC / 600mA

DVI-D socket


2 × 3.5mm jack socket


105 × 26 × 104 mm approx. 370 g approx. 2 m anodised aluminium

105 x 26 x 124 mm approx. 402 g

105 × 52 mm

+5 to +45 °C


CE, RoHs

// DC 15



DVI-CPU-MC2 & DVI-CPU-MC2-UC

left: right:

DVI-CPU-MC2 - front view

DVI-CPU-MC2-UC - rear view

Video

Signal type/Video

Resolution

Colour depth

Audio

Resolution

Refresh rate

Bandwidth

Transmission


Transmission type

Transmission length

Power supply

Main Type

Connection

Voltage


Video

Keyb./Mouse

Audio

Other interfaces

Service

Update

Mode

Casing


Material


Weight


Temperature

Humidity


DVI-CPU-MC2 DVI-CPU-MC2-UC

single-link DVI-D

1920 × 1200 @ 60 Hz

24 bits

24 bits digital

96 kHz

22 kHz




Mini-DIN 4 socket

+12VDC / 1000mA

2 x DVI-D socket


2 × 3.5mm jack socket



105 x 46 x 124 mm approx. 240 g

+5 to +45 °C


CE, RoHs

// DC 16

ControlCenter-Digital

DP-CPU & DP-CPU-UC

7.4

DVI KVM Matrix Switches left: DP-CPU - front view right: DP-CPU-UC - rear view

Video

Video

Resolution

Colour depth

Audio

Resolution

Refresh rate

Bandwidth

Transmission


Cabling type

Transmission length

Power supply

Main Type

Connection

Voltage


Video

Keyb./Mouse

Audio

Other interfaces

Service

Update

Mode

Casing


Material


Weight


Temperature

Humidity


DP-CPU DP-CPU-UC

DisplayPort

1920 × 1200 @ 60 Hz

24 bits

24 bits digital

96 kHz

22 kHz




Mini-DIN 4 socket

+12VDC / 600mA

1 x DisplayPort socket





105 x 26 x104 mm approx. 240 g

+5 to +45 °C


CE, RoHs

// DC 17



VGA-CPU-UC

left: right:

VGA-CPU-UC - front view

VGA-CPU-UC - rear view

Video

Signal type/Video

Resolution

Colour depth

Audio

Resolution

Refresh rate

Bandwidth

Transmission


Cabling type

Transmission length

Power supply

Main Type

Connection

Voltage


Video

Keyb./Mouse

Audio

Other interfaces

Service

Update

Mode

Casing


Material


Weight


Temperature

Humidity


VGA-CPU-UC

VGA

1920 × 1440 @ 75 Hz

24 bits

24 bits

96 kHz

22 kHz

2 x RJ45 socket dedicated 1:1 connection via CAT-x cable

140 m to central module via external power pack

Mini-DIN 4 socket

+12VDC / 500mA

VGA socket



Mini-USB-B socket via ControlCenter-Digital Config panel approx. 2 m anodised aluminium

105 x 26 x 124 mm approx. 240 g

+5 to +45 °C


CE, RoHs

// DC 18



DVI-CPU-Fiber

left: DVI-CPU-Fiber-UC - rear view right: DVI-CPU-Fiber-UC - front view

Video

Signal type/Video

Resolution

Colour depth

Audio

Resolution

Refresh rate

Bandwidth

Transmission


Cabling type

Transmission length

Power supply

Main Type

Connection

Voltage


Video

Keyb./Mouse

Audio

Other interfaces

Service

Update

Mode

Casing


Material


Weight


Temperature

Humidity


DVI-CPU-Fiber DVI-CPU-Fiber-UC

single-link DVI-D

1920 × 1200 @ 60 Hz

24 bits

24 bits digital

96 kHz

22 kHz

1 x RJ45 socket 2 x RJ45 socket dedicated 1:1 connection via fiber optics up to 10,000 m to central module


Mini-DIN 4 socket

+12VDC / 700mA

DVI-D socket





105 x 26 x 124 mm approx. 240 g

+5 to +45 °C


CE, RoHs

// DC 19



U2-R-CPU

left: right:

U2-R-CPU - rear view

U2-R-CPU - front view

USB 2.0

Transfer type

Transfer rate

RS232

Signal type

Type

Resolution

Signals

Transmission

Cabling

Transmission length

Connection


USB 2.0

RS232 more interfaces

RS232

Power supply

Type

Connection

Voltage

Casing

Material


Weight

Update

Mode

Connection


Temperature

Humidity


U2-R-CPU

transparent up to 480 MBit/s transparent

RS232-C max. 115.200 bit/s

RxD, TxD, RTS, CTS, DTR, DSR, DCD dedicated 1:1 connection via CAT-x-cable

140 m

RJ45 socket

USB-B socket

9 pol. Sub-D socket

9 pol. Sub-D socket external power pack

Mini-DIN 4 socket

AC100-240V/60-50Hz, 300mA anodised aluminium

105 × 26 × 104 mm approx. 240 g via Wizard via service socket

+5 to +45 °C below 80%, non-condensing

CE, RoHs

// DC 20



User module

The user module DVI-CON connects the user console to the system.

CAT cabling connects the DVI-CON with the ControlCenter-

Digital. The DVI-CON provide the required interfaces for the following peripherals: monitor, keyboard, mouse, speakers and microphone.

The video output of the DVI-CON (DVI-I interface) also provides a VGA video signal. The output can be used to connect a VGA monitor.

NEW: DVI-CPU and DVI-CON can also be connected directly and used as extender line. Now users can operate computers placed up to 140 m away from the console. Do you plan for a smaller extender installation that you want to expand at some point in the future and connect it to a matrix

DVI-CON

Application

• remote console

• operates the ControlCenter-Digital from distances up to

140 metres

Signals

• single-link DVI-I video


• audio (speakers / Line In)

DVI-CON - front view system? Then DVI-CPU and DVI-CON come in handy and can always be implemented into a matrix system.

In preparation: DVI-CON-Fiber - user module to operate computers from distances up to 10,000 m.

Operation

• select computers via OSD or hotkeys

• configuration via OSD or web interface of the Control-

Center-Digital

• supports TradeSwitch function, CrossDisplay-Switching and Push-Get function

Design

• desktop or rack mount variant

• twin variant (two devices housed in one 19“ casing, shipped as desktop version incl. rack mount kit)

DVI-CON-Video

The user module DVI-CON-Video enables the integration of an additional monitor or projector on the remote console of a compatible KVM matrix switch. Thus it increases a multimonitor workstation. The video signal of the accessed computer is displayed at the monitor/projector of the user module.

Signals

• single-link DVI-I video

Application

• remote console or a wide screen projection

• transmission of a second video signal at the workplace

DVI-CON-2

The new DVI-CON-2 user module provides the interfaces for peripheral devices (monitor, keyboard, mouse, speaker/microphone) and can be connected to up to two matrix clusters to establish a redundant system that‘s always available, for example.

www.gdsys.de

// DC 21



User module

DP-CON

The user module DP-CON provides the interfaces for any peripheral devices (DisplayPort monitor, keyboard, mouse, speaker/ microphone) at the remote console.

NEW: You can also use DP-CPU and DP-CON modules to one extender line.

It transmits the following signals:

- DisplayPort

- Keyboard/Mouse (USB & PS/2)

- Audio bidirectional

Resolution: DisplayPort 1920 x 1200 @ 60 Hz

DP-CON - rear view

DVI-CON-Fiber

The user module DVI-CON-Fiber connects the user console with the ControlCenter-Digital via fiber optics.The transmission length to the ControlCenter-Digital depends on the used module and is up to 10,000 m.

• DVI-CPU-Fiber(M) bridges up to 380 m

• DVI-CPU-Fiber(S) bridgesup to 5,000m

• DVI-CPU-Fiber(S+) bridges up to 10,000m

The DVI-CON-Fiber provide the required interfaces for the following peripherals: monitor, keyboard, mouse, speakers and microphone.

www.gdsys.de

// DC 22



User module

DVI-CON-MC2

The user module DVI-CON-MC2 connects a multi-monitor consoles to the matrix switch system. The DVI-CON-MC2 provides the required interfaces for the following peripherals:

• multi-monitor video

• keyboard

• mouse

• audio (speakers / Line In)

Application

• remote multi-monitor console

• transmission of two video signals at the workplace DVI-CON-MC2 - rear view

DVI-CON-MC4

The user module DVI-CON-MC4 connects a multi-monitor consoles to the matrix switch system. DVI-CON-MC4 transmits four video signals at the workplace.

The video output of all DVI-CON devices (DVI-I interface) also provides a VGA video signal. The output can be used to connect a VGA monitor.

DVI-CON-MC4 - rear view www.gdsys.de

// DC 23



User module

U2-R-CON

Peripherals on the remote user console can be connected with the ControlCenter-Digital via the U2-R-CON module.

The module is connected via CAT cable to the KVM matrix switch.

Application

• remote user console

• operates peripherals with USB2.0 and RS232

• interfaces over distances up to 140 metres to the

DVICenter

Signals

• USB 2.0

• RS232

Mounting

• For the optimized mounting of the U2-R-CON are

19“-Rackmount solutions available. You can find them in

KVM Accessories.

U2-R-CON - rear view www.gdsys.de

// DC 24



DVI-CON & DVI-CON-Video

Console

Consoles

Assigned console ports at central module

Video

Signal type/Video

Resolution DVI / VGA

Audio

Design

Refresh rate

Resolution

Bandwidth

Transmission

Cabling

Transmission length


Interfaces for console

Video

Keyboard/Mouse

Audio

TradeSwitch-LED

Main power supply

Type

Connection

Voltage


Type

Connection

Voltage

Housing

Material


Rackmount (W × H × D)

Weight

Update

Mode


Temperature

Humidity

Conformity

DVI-CON - rear view

DVI-CON DVI-CON-Video

1

1 1

DVI single-link

1920 × 1200 @ 60Hz

1280 × 1024 @ 85Hz internal

96 kHz

24 bit digital

22 kHz dedicated 1:1 connection via CAT-x cable

140 m

1 x RJ45 socket 1 x RJ45 socket

1 x DVI-I socket

2 × Mini-DIN 6 socket

2 × USB-A socket

-

-


1 x D-Sub 9 socket

AC100-240V/60-50Hz, 0.2A-0,12A internal power pack

1 × IEC plug

AC100-240V/60-50Hz, 0,3-0,2A external power pack

Mini-DIN 4 socket

+12VDC/1.0A

+12VDC/0.9A

anodised aluminium

210 × 44 × 210 mm

19" × 1U × 210 mm approx. 1.3 kg via ControlCenter-Digital Config panel


CE, RoHs www.gdsys.de

// DC 25



DVI-CON-Fiber

left: DVI-CON-Fiber - Rear view right: DVI-CON-Fiber-Front view

Console

Consoles


Video

Signal type/Video


Audio

Design

Refresh rate

Resolution

Bandwidth

Transmission

Cabling

Transmission length



Video

Keyboard/Mouse

Audio

TradeSwitch-LED

Main power supply

Type

Connection

Voltage


Type

Connection

Voltage

Housing

Material



Weight

Update

Mode


Temperature

Humidity


DVI-CON-Fiber

1

1

DVI single-link

1920 × 1200 @ 60Hz

1280 × 1024 @ 85Hz internal

96 kHz

24 bit digital

22 kHz dedicated 1:1 connection via fiber optics

140 m

1 x RJ45 socket

1 x DVI-I socket


3 × USB-A socket


1 x D-Sub 9 socket internal power pack

1 × IEC plug

AC100-240V/60-50Hz, 0.2A-0,12A external power pack

Mini-DIN 4 socket

+12VDC/1.0A

anodised aluminium

210 × 44 × 210 mm



CE, RoHs

// DC 26



DVI-CON-2

DVI-CON-2 - Rear view

Console

Consoles


Video

Signal type/Video


Audio

Design

Refresh rate

Resolution

Bandwidth

Transmission

Cabling

Transmission length



Video

Keyboard/Mouse

Audio

TradeSwitch-LED

Main power supply

Type

Connection

Voltage


Type

Connection

Voltage

Housing

Material



Weight

Update

Mode


Temperature

Humidity


DVI-CON-2

1

1

DVI single-link

1920 × 1200 @ 60Hz

1280 × 1024 @ 85Hz internal

96 kHz

24 bit digital


140 m

2 x RJ45 socket

1 x DVI-I socket


3 × USB-A socket



1 × IEC plug

AC100-240V/60-50Hz, 0.3A-0.2A

external power pack

Mini-DIN 4 socket

+12VDC/1.2A

anodised aluminium

210 × 44 × 210 mm



CE, RoHs

// DC 27



DP-CON

DP-CON - rear view

Console

Consoles


Video

Signal type/Video


Audio

Design

Refresh rate

Resolution

Bandwidth

Transmission

Cabling

Transmission length



Video

Keyboard/Mouse

Audio

TradeSwitch-LED

Main power supply

Type

Connection

Voltage


Type

Connection

Voltage

Housing

Material



Weight

Update

Mode


Temperature

Humidity


DP-CON

1

1

DisplayPort

1920 × 1200 @ 60Hz internal

96 kHz

24 bit digital


140 m

1 x RJ45 socket

1 x DisplayPort socket


3 × USB-A socket



1 × IEC plug

AC100-240V/60-50Hz, 0.2-0.12A

external power pack

Mini-DIN 4 socket

+12VDC/1.0A

anodised aluminium

210 × 44 × 210 mm



CE, RoHs

// DC 28



DVI-CON-MC2 & DVI-CON-MC4

DVI-CON-MC4 - rear view

DVI-CON-MC2 DVI-CON-MC4

Console

Consoles


Video

Signal type/Video


Audio

Design

Refresh rate

Resolution

Bandwidth

Transmission

Cabling

Transmission length



Video

Keyboard/Mouse

Audio

TradeSwitch-LED

Main power supply

Type

Connection

Voltage


Type

Connection

Voltage

Housing

Material



Weight

Update

Mode


Temperature

Humidity

Conformity

435 x 44 x 210 mm approx. 3 kg

2

1920 × 1200 @ 60Hz

1280 × 1024 @ 85Hz

AC100-240V/60-50Hz, 0,6-0,3A

+12VDC/2A

1

DVI single-link internal

96 kHz

24 bit digital

22 kHz internal power pack

1 × IEC plug

AC100-240V/60-50Hz, 0,9-0,5A external power pack

Mini-DIN 4 socket

+12VDC/3,6A

19“ × 1U × 210 mm approx. 3 kg via ControLCenter-Digital Config panel


CE, RoHs

4 dedicated 1:1 connection via CAT-x cable

140 m

2 x RJ45 socket 4 x RJ45 socket

2 x DVI-I socket


2 × USB-A socket


1 x D-Sub 9 socket

4 x DVI-I socket


2 × USB-A socket anodised aluminium www.gdsys.de

// DC 29



U2-R-CON

left: right:

U2-R-CON - front view

U2-R-CON - rear view

Console

Consoles


USB 2.0

Transfer type

Transfer rate

Support

RS232

Signal type

Type

Transmission rate

Signals

Transmission

Cabling

Transmission length



USB 2.0

RS232

Power supply

Type

Connection

Voltage

Casing

Material


Weight

Update

Mode

Connection


Temperature

Humidity


U2-R-CON

1

1 transparent up to 480 MBit/s high power devices (500mA) transparent

RS232-C max. 115.200 bit/s

RxD, TxD, RTS, CTS, DTR, DSR, DCD dedicated 1:1 connection via CAT-x-cable

140 m

1 x RJ45 socket

4 x USB-A socket

1 x 9 pol. Sub-D plug external power pack

Mini-DIN 4 socket

+12V DC, 1.3A

anodised aluminium

105 × 26 × 104 mm approx. 240 g via wizard via service socket


CE, RoHs

// DC 30



Operation & Configuration

The ControlCenter-Digital system is operated/configured via:

• OSD & hotkeys

• web interface (ConfigPanel)

Both OSD and hotkeys are available at all DVI-CON user modules; the web interface can be accessed from any console that is connected to the network. The configuration can be performed via web interface or OSD. All configurations are systemwide available. This ensures quick and easy operation.

OSD

The OSD enables you to operate and configure the

ControlCenter-Digital independently from any network. The

DVI-CON modules provide the OSD at all user consoles. The

OSD only covers the currently visible screen content partially

- not fully.

The OSD complies with the individual user requirements and/or your internal safety regulations.

The OSD can be accessed via keyboard/mouse and configurable hotkeys. Hotkey combinations open the menus.

The following menus are available:

• Select (select a computer)

• Operation (frequent operations)

• Personal Profile (adjust user-related details)

• Configuration (change system settings)

• Information (query system status)

Operating options:

User settings

• create up to 256 individual user accounts

• integrated multi-level user/rights administration

• create password protection for all consoles

• create groups for effective rights management

• assign individual configuration rights

• assign access rights for each computer

• define a computer that is automatically accessed after the login

• multiuser-mode: multiple users having simultaneous access to one and the same computer

Computer settings

• create, edit, or delete computer names

• select or search computers by names using the select

menu

• Free Seating: access a user-related computer by logging in at any console

• set permanent information display (computer & user console name) for easy navigation

• create groups for effective access management

• select 3 scan modes to auto-scan the connected

computers

• show computer routing – even over cascades

System info

• recognise components with automatic assignment of the known configuration information

• schematic figure of the system structure from computer to console

• show all computers in one list - even over cascades; no switching though multiple OSDs

• show busy states console <-> computer

Console settings

• connect PS/2 keyboards with special functions

• create open access without querying password

• enable access protection per auto-log off when leaving the console

• block OSD to prevent access to certain consoles

• install a video console (e.g. projector) that can be remotely controlled by other consoles (requires Push-

Get and TradeSwitch module) www.gdsys.de

// DC 31



Web-Interface

The „Config Panel“ web application offers a graphical user interface to configure the ControlCenter-Digital.

The clearly organized user interface shows the com-

prehensive OSD settings and therefore makes the web interface

the primary configuration tool.

The Config Panel is divided into the following sections. The list below highlights the most important settings:

Basic configuration

• network parameter

• tools (backup/restore, firmware update, resetting the defaults)

• query of syslog messages

Dynamic port configuration

• define ports as console or computer connection in any

order

Rights configuration

• user rights

• user group rights

• computer rights

• computer group rights

Matrix switch configuration

• name, hotkeys etc.

• activation of communication modules

• network settings

User module configuration

• name

• cascade information

• console type

• special keyboard

Computer configuration

• configuration of the computer module

• cascade information

Monitoring configuration

• Query of syslog messages

• SNMP SET + Get/Trap www.gdsys.de

// DC 32



Hardware / Expansion

The hardware components are connected to the ControlCenter-Digital and fully integrated into operation. This way e.g. the power-switching can be carried out in the OSD.

The user range can be increased by using the computer modules DVI-CPU-UC.

Through installation of the Dynamic UserCenter32 several computers can be accessed from multipleControlCenter-

Digital clusters.

We provide the following hardware expansions:

• increase the number of computers by cascading with other DVICenters

• double the number of consoles with the DVI-CPU-UC computer modules (also applicable for backup systems/ mirrored systems)

• increase the system‘s range up to 10,000 m by integrating a fibre optics line (DVI-FiberLink)

• access to computers from multiple ControlCenter-Digital

-Clusters by using Dynamic-UserCenter32

MultiPower

The MultiPower serves as the central power source of G&D devices that require an external power pack (for example DVI-

CPU or DVI-Extender-F).

The Multipower-12 and the MultiPower-6 are functional and a space-saving solution for applications as in a server room and computer rack.

MultiPower-12 provides up to 12 output interfaces (12V, max.

600mA) and MultiPower-6 provides up to 6 output interfaces

(12V, max. 1,2A). Optimally suitable for the power supply of

DVI-CPU or DVI-CPU-MC2 in a rack.

• power supply for up to twelve devices

• central power source e.g. in a rack or when applied in a server room

• MultiPower-12 twelve interfaces 12VDC (max. 600mA)

• MultiPower-6: six interfaces 12VDC (max. 1,2A)

• redundant power supply above: MultiPower-12 below: MultiPower-6 www.gdsys.de

// DC 33

ControlCenter-Digital

Hardware / Expansion

7.4


more Consoles

The DVI-CPU-UC devices allow you to connect more consoles

than ports provided at the device.

Use DVI-CPU-UC modules instead of the usual DVI-CPU computer modules to increase the number of consoles or to establish a redundant system.

Using a second RJ-45 socket, the DVI-CPU-UC module

doubles the keyboard, video, mouse, and audio interfaces to the ControlCenter-Digital. Thus, a computer can be connected to two matrix switch clusters. Combining the DVI clusters with the corresponding central and user modules increases the number of consoles.

This requires:

• 1 x computer module DVI-CPU-UC per computer

• + number of DVI-CON modules according to the number of additional consoles

• + DVICenter DP32 according to the number in cluster 1

More details regarding the DVI-CPU-UC are given in the section Computer modules.

DVI-CPU-UC - rear view www.gdsys.de

// DC 34



Hardware / Expansion: more consoles

Dynamic-UserCenter32

The Dynamic UserCenter allows you to access multiple computers via several ControlCenter-Digital clusters. This way the Dynamic-UserCenter expands the user range of the matrix switch

For example:

When configuring the Dynamic-UserCenter with

• 1 CPU you can operate this computer via up to

31 simultaneous ControlCenter-Digital-Clusters

• 4 CPUs you can access those computers over 7 simultaneous ControlCenter-Digital-Cluster

Thus, the number of users can be increased significant.

Dynamic-UserCenter32 - rear view

Highlights/System

The Dynamic UserCenter is a supporting module for the

ControlCenter-Digital Series and can be used to realize large installations. The product offers 32 dynamic ports, which can be freely configured as computer or user port by web interface.

System Features

• Centralised configuration of the dynamic ports (cluster /

CPUs) via web interface

• Hot plug und hot swap capability

• Finder-LED on the front and back side

Design

The Dynamic-UserCenter is shipped as desktop device.

The package contents contain a 19“ rack mount set.

Network / Communication / Security

• Redundant power supply

• Monitoring function integrated

• SNMP-Trap & -Agent support

• Syslog massage output

• Backup and Restore of device configuration via web-

interface

Capacity

No. of port groups

1

2

3

4

5

6

7

8

9

10

No. of clusters per group

31

15

9

7

5

4

3

3

2

2 www.gdsys.de

// DC 35



Dynamic-UserCenter32

left: right:

Dynamic-UserCenter32 - front view

Dynamic-UserCenter32 - rear view

Cluster

Typ of cluster ports

Cluster ports per device

Transmission type computer module

Transmission lenght to central module

Interfaces for central module

Computer


Computer ports




Main power supply

Type

Connection

Voltage


Type

Connection

Voltage

Casing

Material



Weight

Update

Mode


Temperature

Humidity

Conformity

Dynamic-UserCenter32

RJ45 socket


Dedicated 1:1 connection via CAT-x cable

140 m

RJ45 sockets

RJ45 socket


Dedicated 1:1 connection via CAT-x cable

140 m

RJ45 sockets

Internal power pack

1 × IEC plug

AC100-240V/60-50Hz

0,8A - 0,3A

Internal power pack

1 × IEC plug

AC100-240V/60-50Hz

0,8A - 0,3A

Anodised aluminium

435 x 44 x 211 mm

19" x 1HE x 211 mm

Approx. 4.0 kg

Via network

+5 to +40 °C


CE, RoHs www.gdsys.de

// DC 36



more Computers

When cascaded into three levels, the ControlCenter-Digital system increases the number of connectable computers.

The master device takes over all controlling tasks. The listed possibilities guarantee the full access of all consoles to all computers over all cascade levels.

Cascading allows for an

additional transmission distance of

140 m (CAT) per ControlCenter-Digital. When fully cascaded, the distance from computer through to the cascaded central modules up to the user module can be up to 560 m (CAT)

How to read the following table 2 (e.g. the row „2 Console ports“)

When configuring the ControlCenter-Digital with

• 17 console ports and 271 computer ports (stand-alone)

• you can operate 4081 computers via 17 simultaneous consoles in the first cascade. This requires

16

ControlCenter-Digital.


Table1

36

37

38

39

40

32

33

34

35

41

42

43

44

45

46

47

48

Console Ports

Stand-Alone

Computer Ports

17

18

271

270

19

20

21

269

268

267

28

29

30

31

22

23

24

25

26

27

260

259

258

257

266

265

264

263

262

261

252

251

250

249

248

256

255

254

253

247

246

245

244

243

242

241

240

2048

1809

1794

1779

1764

1535

1522

1509

1496

1483

1266

1255

1244

1233

1222

1211

1200

1 Cascade

No. of Computers No. of CCD 288

4081

4050

16

16

3769

3492

3219

15

14

13

3194

2927

2904

2643

2622

2367

2348

2099

2082

2065

10

9

9

9

13

12

12

11

11

10

7

7

7

8

7

9

8

8

8

6

6

7

6

6

6

6

6 www.gdsys.de

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

2 Cascade


- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

// DC 37




72

73

74

75

76

68

69

70

71

83

84

85

86

77

78

79

80

81

82

87

88

89

90

91

92

93

94

64

65

66

67

58

59

60

61

62

63

Console Ports

Stand-Alone

Computer Ports

49

50

51

52

239

238

237

236

53

54

55

56

57

235

234

233

232

231

224

223

222

221

230

229

228

227

226

225

201

200

199

198

197

196

195

194

216

215

214

213

212

220

219

218

217

205

204

203

202

211

210

209

208

207

206

648

499

494

489

484

676

669

662

655

449

444

439

434

479

474

469

464

459

454

704

697

690

683

746

739

732

725

718

711

1 Cascade


999

990

981

972

5

5

5

5

963

954

945

936

927

5

5

5

5

5

4

4

4

4

4

4

4

4

4

4

429

424

419

414

409

404

399

394

3

3

3

3

3

3

3

3

3

3

3

4

3

4

4

4

4

3

3

3

3

3

3

3

3

3

3 www.gdsys.de

2044

2019

1994

1969

1944

1067

1054

1041

1028

1015

1002

989

976

963

950

937

924

911

898

2 Cascade


4039

3998

3957

3916

21

21

21

21

3875

3834

3793

3752

3711

21

21

21

21

21

2294

2269

2244

2219

2194

2169

2144

2119

2094

2069

13

13

13

13

13

13

13

13

13

13

885

872

859

846

833

820

807

794

7

7

7

7

7

7

7

7

7

7

7

13

7

13

13

13

13

7

7

7

7

7

7

7

7

7

7

// DC 38




29

30

31

32

33

25

26

27

28

40

41

42

43

34

35

36

37

38

39

44

45

46

47

48

49

50

51

21

22

23

24

15

16

17

18

19

20

Console Ports

Stand-Alone

Computer Ports

6

7

8

9

154

153

152

151

10

11

12

13

14

150

149

148

147

146

139

138

137

136

145

144

143

142

141

140

116

115

114

113

112

111

110

109

131

130

129

128

127

135

134

133

132

120

119

118

117

126

125

124

123

122

121

539

530

521

512

409

685

674

557

548

360

275

270

265

402

395

388

381

374

367

1 Cascade


3854

3219

2888

2423

26

22

20

17

2250

1943

1780

1621

1466

16

14

13

12

11

847

834

707

696

1315

1296

1151

1010

995

980

7

7

6

6

10

10

9

8

8

8

260

255

250

245

240

235

230

225

3

3

3

3

3

3

3

3

5

5

4

5

5

6

6

5

5

4

3

3

3

4

4

4

4

4

4 www.gdsys.de

3435

3374

2253

2212

2171

2130

2089

2048

1255

1230

1205

1180

1155

1130

1105

1080

587

574

561

2 Cascade


- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

3557

3496

- -

- -

- -

- -

- -

- -

- -

- -

31

31

- -

- -

- -

- -

- -

- -

548

535

522

509

496

483

470

457

7

7

7

7

7

7

7

7

21

21

21

21

13

31

31

21

21

13

7

7

7

13

13

13

13

13

13

// DC 39




77

78

79

71

72

73

74

75

76

62

63

64

65

58

59

60

61

Console Ports

Stand-Alone

Computer Ports

52

53

108

107

54

55

56

57

106

105

104

103

66

67

68

69

70

102

101

100

99

98

97

96

95

94

93

92

91

90

83

82

81

89

88

87

86

85

84

1 Cascade


220

215

3

3

158

155

152

149

2

2

2

2

134

131

128

125

146

143

140

137

122

119

116

113

110

2

2

2

2

2

2

2

2

2

2

2

2

2

89

86

83

107

104

101

98

95

92

2

2

2

2

2

2

2

2

2

2 Cascade


444

431

7

7

210

205

200

195

3

3

3

3

170

165

160

155

190

185

180

175

150

145

140

135

130

3

3

3

3

3

3

3

3

3

3

3

3

3

95

90

85

125

120

115

110

105

100

3

3

3

3

3

3

3

3

3 www.gdsys.de

// DC 40



more Range

The DVI-FiberLink increases the system range within a

ControlCenter-Digital cluster to up to 10,000 m. The system consists of two identical modules (transceivers) and is available in two variants:

• DVI-FiberLink(M)

Transmission via 2 multi-mode fiber optics (50/125µm)

Range

up to 550 m

• DVI-FiberLink(S)

Transmission via 2 single-mode fiber optics (9/125µm)

Range

up to 10,000 m

The pair of DVI-FiberLink devices can be placed between any ControlCenter-Digital module. One pair of DVI-FiberLink devices extends one access (console).

Installation:

We provide 19“ rack mount solutions for easily installing a

DVI-FiberLink(S) into a server rack. The solutions are listed under KVM Accessories.

DVI-FiberLink(S) - rear view www.gdsys.de

// DC 41



DVI-FiberLink

left: right:

DVI-FiberLink(S) - front view

DVI-FiberLink(S) - rear view

Main power supply

Type

Connection

Voltage

Power loop support

Transmission CAT side

Transmission mode

Interface

Transmission length

Transmission fiber side

Transmission mode

Interface

Transmission cable

Transmission lenght

Casing

Material


Rackmount

Weight

Update

Mode

Connection


Temperature

Humidity


DVI-FiberLink(S) DVI-FiberLink(M)

external power pack

Mini-DIN 4 power socket

+12VDC/0.3A

yes dedicated 1:1 connection via CAT-x cable

1 × RJ45 socket up to 140 m

2 fiber optic strands (cross-over connection)

1 × LC duplex socket

2 single-mode fiber optic strands 2 multi-mode fibre optic strands

10,000 m

(9/125 µm, 2,000 MHz*km, OS1)

550 m

(50/125 µm, 500 MHz*km, OM2)

275 m

(62.5/125 µm, 200 MHz*km, OM1)

220 m

(62.5/125 µm, 160 MHz*km, FDDI grade) anodised aluminium

105 × 26 × 86 mm see KVM Accessories/19" Device Carrier approx. 240 g via wizard

1 × Mini-USB-B socket

+5 to +40 °C


CE, RoHs

// DC 42



Firmware / Expansion

Use the devices‘ web interface to install and activate any firmware expansions.

We provide the following firmware expansions:

• Push-Get function

(push the image and/or operation of your console to another DVI-CON or get the image from there)

• TradeSwitch function

(turn multiple DVI-CONs into a multi-monitor console, and operate this console through only one keyboard/mouse).

• CrossDisplay-Switching

(Automatic switching by mouse between channels.

With CrossDisplay-Switching (CDS), users can use the mouse to switch between the modules of a Tradeswitch configuration)

• IP-Control-API

(use a third-party program to build an interface for swit ching/operating the ControlCenter-Digital over network)

Push-Get

Function: DVI-CON interaction

Operation via: OSD

Operating requirement: activation within master

Efficiency: 1 cluster

The Push-Get function allows you to push the image of a target to - or get it from - the display of another console. This display can be a large screen projection, for example.

All consoles can exchange computer and screen contents to work together on a common task.

Screen-Freeze Function

If the display loses the video signal due to a broken connection or a problem with the computer‘s graphics card, the

Screen-Freeze function „freezes“ the image last displayed on the monitor.

This status ist highlighted by a red semi-transparent frame.

The function is automatically cancelled when the display receives an active video signal.

FIBREVison-CON and WACOM® display with active Screen-Freeze function.

www.gdsys.de

// DC 43



TS-Function

Function: DVI-CON pooling

Operation: via hotkeys

Operating requirement: activation within master

Efficiency: 1 cluster

The TradeSwitch function combines multiple user modules

(DVI-CON) into one logical console.

The logical console can be operated with one keyboard and one mouse while providing multiple displays (multimonitor console). Large screen projections can also be integrated.

A hotkey assigns keyboard and mouse to the DVI-CON devices of the logical console. The size and amount of user groups is optional.

With the innovative CrossDisplay-Switching as part of the TS-function (ControlCenter-Digital), users can use the mouse to easily switch between channels.

CrossDisplay-Switching

Function: Switching by using the mouse

Operation: using mouse cursor

Operating requirement: activated TS-Function

Efficiency: 1 Cluster

The mouse acts as if on a “virtual desktop” and can be moved seamlessly across the connected displays. Moving the cursor from the active to another display, the keyboard-mouse focus automatically switches to the connected computer.

Now users can create a multi-monitor console and need only one keyboard and one mouse to operate all computers. The mouse becomes the ultimate intuitive switching tool.

www.gdsys.de

// DC 44



IP-Control

Function: DVICenter remote control over IP

Operation via: customer-programmed user interface or media control

Operating requirement: activation within master + programming of user interface

Effectiveness: system (several clusters)

The IP-Control-API function allows you to send switching commands to the ControlCenter-Digital. The commands are sent via network.

The system is operated independently from a DVI-CON user module. Regardless of the location, each computer can access the desired projection media and/or operator screens.

To program the user interface you are provided with the necessary Windows DLL or Linux SO interface.

IP-Switching also allows you to:

• receive information about current switching conditions

• cancel all switching conditions (disconnect)

• receive information about the computer status

• execute the Push-Get function via network (but no

OSD integration) www.gdsys.de

Illustration

// DC 45



List of Item Number Central Module

Item No.

A2300054

A2300055

A2300056

Item No.

A2300057

A2300058

A2300059

A2300060

A2300061

A2300062

A2300063

A2300078

A2300065

A2300066

A2300068

A2300069

A2300070

A2300071

A2300073

A2300074

A2300075

Description




Description

CCD-Control-Card

CCD-Switch-Card-288

CCD-Switch-Card-160

CCD-Switch-Card-80

CCD-IO16-Card-CAT

CCD-IO16-Card-Fiber(M)

CCD-IO16-Card-Fiber(S)

CCD-IO16-Card-Fiber(S+)

CCD-Fan-IN-Card-160

CCD-Fan-IN-Card-288

CCD-Fan-OUT-Card-160

CCD-Fan-OUT-Card-288

CCD-Power-Module-288

CCD-Power-Module-160

CCD-Air-Filter-288

CCD-Air-Filter-160

CCD-Air-Filter-80

User

1 to 287

1 bis 159

1 bis 79

Computer

287 to 1

159 bis 1

79 bis 1

A2320071

A2320070

A2320075

A2320074

A2320090

A2320091

A2320092

A2320063

A2320072

A2320073

A2320078

A2320079

A2320083

A2320085

A2320086

A2320096

List of Item Numbers Computer Modules

Item No.

Description USB 2.0

RS232

DVI-CPU

DVI-CPU without-power-pack

DVI-CPU-UC

DVI-CPU-UC without power-pack -

DVI-CPU-Fiber(M) -

-

-

-

DVI-CPU-Fiber(S)

DVI-CPU-Fiber(S+)

U2-R-CPU

DVI-CPU-MC2

-

-

-

USB 2.0

DVI-CPU

-

-

-

-

-

-

-

-

RS232

DVI-CPU-MC2-UC

DP-CPU

DP-CPU-UC

DVI-CPU-FSC

DVI-CPU-UC-FSC

VGA-CPU-UC

VGA-CPU-UC without PowerPack -

-

-

-

-

-

-

-

-

-

-

-

-

-

PS/2

PS/2

PS/2

PS/2

PS/2

PS/2

PS/2

PS/2

-

PS/2

PS/2

PS/2

PS/2

PS/2

PS/2

PS/2

PS/2

USB

USB

USB

USB

USB

USB

USB

-

USB

USB

USB

USB

USB

USB

USB

USB

USB-K/M Video Audio No.of clusters

DVI-SL

DVI-SL

DVI-SL

DVI-SL

DVI-SL

Audio

Audio

Audio

1

1

2

Audio 2

Audio 1

DVI-SL

DVI-SL

Audio

Audio

1

1

1

2 x DVI-SL Audio 1

2xDVI-SL Audio 2

1 x DP Audio 1

1 x DP Audio 2

1 x DVI-SL Audio 1

1 x DVI-SL Audio 2

VGA

VGA

Audio 2

Audio 2 www.gdsys.de

// DC 46



List of Item Numbers User Modules

Item No.

Description USB 2.0

RS232

A1120157

A1120157-12V

A1120159

A1120161

A1120162

A1120164

A1120167

A1120168

A1120151

A1120160

A1120158

A1120166

DVI-CON

DVI-CON-12V

DVI-CON-RM

Twin-DVI-CON

DVI-CON-Fiber(M)

DVI-CON-Fiber(S)

DVI-CON-Fiber(S+)

DVI-CON-2

U2-R-CON

DVI-CON-Video

DVI-CON-MC2

DVI-CON-MC4 -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

USB 2.0

RS232

-

-

-

-

-

-

-

PS/2

PS/2

PS/2

PS/2

PS/2

-

-

PS/2

PS/2

PS/2

PS/2

PS/2

PS/2

USB

USB

USB

USB

-

-

USB

USB

USB

USB

USB

USB

USB-HID DVI

DVI-SL

DVI-SL

DVI-SL

DVI-SL

DVI-SL

DVI-SL

DVI-SL

DVI-SL

-

DVI-SL

-

Audio Desktop/

Rackmount

Audio

Audio

Audio

Audio

Audio

Audio

DT

Audio DT

Audio RM

Audio DT/RM

DT

DT

DT

DT

DT/RM

DT

2 x DVI-SL Audio DT

4 x DVI-SL Audio DT

1

2

1

1

1

1

1

1

No. of cluster

1

1

1

1

List of Item Numbers Expansions ControlCenter-Digital

Item No.

Description

PowerSwitching

A4110030

A4110032

MultiPower-12

MultiPower-6

Power Supply, Rackmount

Power Supply, Rackmount

more Range

A2300044

A2300052

DVI-FiberLink(S)

DVI-FiberLink(M)

Single-mode transceiver up to 10,000 m, please order 2 x for 1 line

Multi-mode transceiver up to 550 m, please order 2 x for 1 line

Firmware expansions

A8200014

A8200013

A8200015

TS-Function DVICenter

Push-Get-Function DVICenter

IP-Control-API DVICenter

TradeSwitch module

Push-Get module

IP-Switching module

Hardware expansions

A2200016 Dynamic-UserCenter32 Expending the number of workplaces www.gdsys.de

// DC 47

www.gdsys.de

ABBRE VIATIONS

CPU = Computer module

PC = Computer module

CON = User module

REM = User module

MC2 = Multichannel 2



EQUIPMENT FEATURES

= modular setup

= keyboard/mouse

= dual-link DVI video

= single-link DVI video

= DisplayPort 1.1

DVI

&VGA

= single-link DVI + VGA

VGA

= VGA video

= Audio

RS

232

= RS232

= USB 1.1

= USB 2.0

= Delay

= Screen Freeze

= Power Switching

Legend

M = Multimode

S = Singlemode

RM = For assembly in a 19“ rack

DT = Available as desktop variant

A = Audio

AR = Audio + RS232

R = RS232

U = transparent USB 1.1

U2 = transparent USB 2.0

D = Delay

= Fire Wire

VT

100

= VT100

KVM

IP

= KVM IP access

LAN

= Network connection

WEB

If

= Web interface

= DevCon support

Moni tor

= Monitoring

= CAT cable

Fiber optics

= Fiber optics

= Single user

= Multi user

= Separat local/remote user

// extra

DVI KVM Matrix Switches DVICenter 7.1

DVI KVM Matrix Switches

Matrix Switches for the simultaneously operation of multiple computers via several consoles

HETEC Datensysteme GmbH

The company

Leading the way in digital KVM

Highlights / System

CAT

Fiber

VGA

LAN

USB

RS

WEB

Highlights / Monitoring&SNMP

Features

Versatile functions

Application scheme

Use

Variants

ControlCenter-Digital-288

ControlCenter-Digital-160

DVI-CPU

DVI-CPU-UC

DVI-CPU-FSC & DVI-CPU-UC-FSC

DVI-CPU-MC2

DVI-CPU-MC2-UC

DP-CPU

DP-CPU-UC

VGA-CPU-UC

DVI-CPU-Fiber

U2-R-CPU

DVI-CPU & DVI-CPU-UC

DVI-CPU-FSC & DVI-CPU-UC-FSC

DVI-CPU-MC2 & DVI-CPU-MC2-UC

DP-CPU & DP-CPU-UC

VGA-CPU-UC

DVI-CPU-Fiber

U2-R-CPU

DVI-CON

DVI-CON-Video

DVI-CON-2

DP-CON

DVI-CON-Fiber

DVI-CON-MC2

DVI-CON-MC4

U2-R-CON

DVI-CON & DVI-CON-Video

DVI-CON-Fiber

DVI-CON-2

DP-CON

DVI-CON-MC2 & DVI-CON-MC4

U2-R-CON

OSD

Web-Interface

MultiPower

more Consoles

Highlights/System

Capacity

Dynamic-UserCenter32

more Computers

ControlCenter-Digital-288

ControlCenter-Digital-288

ControlCenter-Digital-160

ControlCenter-Digital-160

more Range

DVI-FiberLink

Push-Get

Screen-Freeze Function

TS-Function

CrossDisplay-Switching

IP-Control

List of Item Number Central Module

List of Item Numbers Computer Modules

List of Item Numbers User Modules

List of Item Numbers Expansions ControlCenter-Digital

ABBRE VIATIONS

EQUIPMENT FEATURES

Legend

Related manuals