Datapath VisionRGB-E2S
Dual Channel RGB/DVI/HD Capture Card
Advanced Graphics Display Technology
The VisionRGB-E2S has two complete capture channels
The VisionRGB-E2S is an ideal solution for applications that
supporting up to 1920x1080 DVI or 2048x1536 Analog
require the capture of Analog or DVI sources in real time.
Typical applications include:
The VisionRGB-E2S captures the Analog/DVI data and
triple buffers it into onboard storage. This data is then
copied using DMA to the host system for display, storage
or streaming.
Viewing Analog or DVI sources from PCs, MACs,
Industrial/medical equipment, cameras and other video
Streaming video applications
Video/Data Wall Controllers
When a Datapath graphics card is used, the VisionRGB-E2S
transfers the data directly to the graphics card thereby
increasing performance. The VisionRGB-E2S sends the
relevant portions of each captured image to each display
channel and instructs each channel to use its graphics
engine to render the data. This fully utilises the hardware
and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath
graphics card, the VisionRGB-E2S sends the data to system
memory or direct to the graphics card, dependant on the
software used for display.
W W W. S T E M M E R- I M A G I N G . C O M
DirectShow drivers for WDM Streaming driver supports the
following applications, to encode, record and stream video
over networks or the Internet:
Microsoft Media Encoder®
Adobe Flash Encoder
Any other DirectShow encoding software
Dual channel RGB/DVI/HD capture card
For streaming applications, the VisionRGB-E2S can
(PCI Express)
be used with Windows Media Encoder to compress
Four Lane PCIe interface with a maximum data
rate of 650MB/sec.
Maximum analog RGB capture resolution of
2048 x 1536 x 24bit
Maximum DVI capture resolution of 1920 x 1200 x
and stream captured video. To replay the video, use
Windows® Media Player.
Any application compatible with Windows®
DirectShow technology can use the VisionRGB-E2S
due to its built-in WDM support.
HD modes using the supplied DVI/ Component
Adapter or DVI/HDMI Adapter (HDCP not
The VisionRGB-E2S is supplied with a powerful
On card processor for real time mode and sync
software application for configuring the timing and
format of the input sources and displaying the data.
Support for multiple cards allowing up to 32
Simply connect your external DVI or Analog source
capture channels. (16 cards)
into the card, run the VisionRGB-E2S application
Direct DMA driver software and streaming driver
to automatically detect the video source format
High quality down scaling
and display the captured video in a window on your
Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8
video formats
High performance DMA to system memory or
direct to graphics memory with scatter gather
Support for separate H/V sync, Composite sync or
Sync on Green
Dual Channel RGB/DVI/HD
16 cropping windows per capture channel
Capture Card, PLUS 1 x DVI/VGA, 1
Includes WDM streaming drivers and the Datapath
x DVI/component and 1 x DVI/HDMI
Vision application software
Fully integrated with the Datapath Wall Control
Capture Card, PLUS 1 x DVI/VGA, 1
software for video wall applications.
Dual Channel RGB/DVI/HD
x DVI/component and 1 x DVI/HDMI
VisionRGB-E2S is also optimised for operation with
the Datapath range of graphics cards
Support for Windows® XP/Vista/Server 2003/
Server 2008/Windows® 7/ Windows® 8 and Linux
All products are shipped with the latest software
Datapath SDK included for software developers
available, unless stated otherwise.
Special requirements may be organised by contacting
our Sales team.
W W W. S T E M M E R- I M A G I N G . C O M
Board Format
PCI-e x4 half size plug-in card, 110mm x 170mm.
PCI-e bus master with scatter gather DMA
Two DVI-I type connectors.
Maximum Sample Rate
170 MHz analogue RGB or 165MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using dual-pass
Maximum Data Rate
VisionRGB-E2 480MB/s
VisionRGB- E2s 650MB/s
Video Sampling
RGB: 24 bits per pixel / 8-8-8 format.
Video Capture Memory
64 MB, triple buffered.
Analog RGB Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080,
2048 x 1536, custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x
1200, and custom modes.
HD Modes
1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector
(HDCP not supported).
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode
changes in the source signal.
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels.
YUV: 4:2:2.
MONO: 8bit.
Update Rate
User defined, captured frame rate will match the source providing max data rate
(650MB/s) is not exceeded.
Multi-buffered to eliminate tearing artifacts.
Video Format Options
Analog RGB plus HSync and VSync (5 wire).
Analog RGB with Composite Sync (4 wire).
Analog RGB with Sync on Green/YPbPr (3 wire).
DVI Single Link.
Operating System Support
Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008,
Windows Server 2012, Windows 7, Windows 8 and Linux support
See for updates.
Power Requirements
Max current at +3.3V – 0.25A.
Max current at +12V – 1.2A.
Max power – 15 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
3 years
We are continously developing the technology used within our product ranges delivering outstanding innovative solutions,
therefore the specification may change from time to time.
Imaging is our passion.
Gutenbergstraße 9 - 13, D-82178 Puchheim
Phone: +49 89 80902-0, [email protected]
FG-DPO5-12/ 2014 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF