Apple C2h15d User manual

Apple C2h15d User manual
GETTING STARTED
SIDE
SIDE
B
PRECAUTIONS
STARTING THE FIRST TIME
MAINTENANCE
In a multiple screen configuration, most video
cards will boot one screen first, thus allowing
you to configure your system as you see fit.
Once the appropriate drivers have been
loaded, the system will re-boot and bring up
both screens. You may then proceed to
arrange your desktop, configure any
particular environment characteristics you
wish, and start up your applications.
Liquid Crystal Displays are highly
sophisticated pieces of equipment. Avoid
touching the screen surface with any sort of
hard object, as this may result in scratches,
which will reduce the effectiveness of the
display and are not covered by your warranty.
PACKAGE CONTENTS
PRECAUTIONS
Your C2H15D dual format package includes:
Avoid touching or applying pressure to the
screen with your fingers as damage to the
liquid crystal layer may occur. Wipe marks
from the screen with absorbent cotton or a
soft cloth. Do not use chemical cleaners.
Carefully unpack the LCD monitors.
1
Always handle your monitor with care when
moving. If you move the screens around on a
frequent basis, it is also good idea to
periodically check to ensure that all fittings
and screws are tight.
IMPORTANT:
Handle the monitors with care so that
pressure is not placed on the front surface of
the LCD panel as this may result in
permanent damage to the panel. Don’t rest
any objects on top of the screens.
Unpack the structure carefully.
GETTING STARTED
ON SCREEN DISPLAY MENU
STARTING THE FIRST TIME
OSD FUNCTION
PACKAGE CONTENTS
SUB-MENU FUNCTIONS
A dual head monitor system with integral
video cables terminated with 29-pin DVI-I
connector.
OTHER INFORMATION
One universal input power supply complete
with power cord.
MAINTENANCE
PRECAUTIONS
WARRANTY STATEMENT(S)
UNPACKING YOUR MASS
MULTIPLES™
2
If a base tray is available use this to prevent
the unit from tipping during installation. Place
the structure and base tray on a level surface.
The monitor contains high voltage parts.
You may suffer serious injury if you touch
these parts.
User manual, Support Structure assembly
instructions
Avoid exposing the monitor to direct sunlight
or another heat source. The monitor should
be facing away from direct sunlight to
reduce glare.
CUSTOMER SUPPORT
Support Structure fasteners
OTHER LCD INFORMATION
3
FCC INFORMATION
CONNECTING YOUR
MONITORS
Do not place anything on the monitor that
blocks the flow of air through the vent which
may prevent adequate dissipation of heat.
Registration Card
Macintosh adapter (optional)
Ensure the area around the monitor is clean
and free of moisture.
OPERATION
Do not place heavy objects on the monitor,
video cable or power cord.
LOCATION OF CONTROLS
If smoke, abnormal noise, or strange odor is
present, immediately switch the monitor off
and call your dealer. It is dangerous to
continue using the monitor.
SPECIFICATIONS
Caution: secure base when installing LCD
screens. To prevent the unit from tipping
assemble screens from center out. If base
tray is available simply slide from assembly.
Once you’ve located the structure at a
desired location then simply slide the LCD
monitors onto patented ‘quick release’
system. Ensure that the LCD panel locks in
place.
Warranty Statement
USING THE QUICK RELEASE
If base needs to be assembled refer to
Support Structure assembly procedure on
how to assemble base using wing nut and
washers provided.
4
After confirming that all the LCD panels are
secured, feel free to adjust the panels to the
desired position. Hold the LCD screen
without applying pressure on the LCD
surface, and adjust. Proceed to connect the
display system to your computer as detailed
in this user manual. Connect monitor to
appropriate cables provided.
TROUBLESHOOTING
USING THE QUICK RELEASE
CONNECTING YOUR MONITORS
LOCATION OF CONTROLS
FRONT PANEL
SPECIFICATION
REAR CONTROL PANEL
Property
To unlock LCD
To lock LCD
(A) Phillips screws
slide LCD
in place
lift LCD
depress latch to
release LCD
locked position
‘quick release’ latch
Note: remove connector
before depressing latch
DOCKING YOUR LCD AND TIGHTENING BALL JOINT
1. Match the ‘dove tail’ to ensure that the LCD unit sits flat against the ‘ball and socket’
assembly.
2. Simply slide the two interlocking parts, while ensuring that the unit is locked in place. Now
you can proceed and install the connectors.
3. To remove the LCD head reverse the procedure. To unlock the LCD unit you must depress
the ‘quick release’ latch. Ensure a proper grip on the LCD to prevent it from slipping.
When removing the LCD panels make sure you counter the weight of the other LCD
screens to prevent the unit from tipping. Lift the LCD panel and place on a flat surface.
4. To tighten ‘ball joint’ simply turn two Phillips screws (A), turn a quarter turn until desired
position is achieved.
5. Review Detail of Quick Release System (above) for the location of the ‘quick release’ latch.
Monitor Type
Integrated dual screen LCD
Size and Weight
19" x 27.0" x 10.0" (H x W x D) approximately
17 lbs (8 kg)
Power Requirements
Line Voltage: 100 to 240 VAC, 50 - 60 Hz
Power: 18W (operating)
Resolution (per screen, multi-scan)
640 x 400, 720 x 400, 640 x 480, 800 x 600,
832 x 624, and 1024 x 768
Resolution (aggregate max.)
Pixel Pitch
Color Depth
Viewing Angle
Brightness
Contrast Ratio
Screen Size and Type
Surface Treatment
2048 X 768
0.297 (H) x 0.297 (V)
More than 16 million
H +65°/-65° V+55°/-45° typical
2
250cd/m
400:1 typical
15" diagonal active matrix TFT
Anti-glare and hard coatings 2H
User Controls
Power on/off
On Screen Control - Menu
Select up/down
Increment / decrement
FCC, CE, Entela, Energy Star
Two x 29-pin DVI-I connectors
Aluminum
Approvals
Input Connections
Support Structure
DETAIL OF QUICK RELEASE SYSTEM
Power Light
Menu
Directional Select
N/A
Description
Power
OPERATION
INTERFACE DESCRIPTION
TROUBLESHOOTING
1. Ensure power is off before proceeding with the installation.
REAR CONTROL PANEL
Problem
Suggested remedies
2. Connect the video cable marked with "A" to the first video output of your computer.
Power
Turns the monitor On/Off
No image on one or more screens
3. Similarly connect the video cable marked with "B" to the second video output of your computer.
Menu
Displays the menu. Exits the menu or control screen.
4. Connect the output cables of the power supplies to the five pin DIN connectors.
Up/Down Select
Highlights next menu item
5. Connect the power cords.
Increment/Decrement
(+/-) Changes the value of the selected item or
highlights the next menu item in a submenu.
Make sure cables are properly fastened.
Check power to monitors.
Check video connection from computer to
monitors.
Check seating and bus location of video card.
Use known working monitor to check for signal.
Re-boot the computer.
Re-install driver software.
Use driver software to re-tile monitor order.
Check color settings within the O/S controls..
Check to make sure screen mounting pivots
are properly fastened and tightened.
6. Turn your computer on.
7. Turn the screens on by pressing the power button located on the lower back of each
monitor. Power indicator will light.
Screen viewing order is incorrect.
Colors are not clear.
Screens will not stay in one position.
FRONT PANEL
Green light = power on
Amber light = loss of video
ON SCREEN DISPLAY MENU
Black Level
Contrast
Black Level
10
Color (n/a)
Brightness currently
selected, displayed as
active.
Factory Reset
YES
Image
Position (n/a)
1 : Exit
1 : Exit
Use the Directional Select to make adjustments.
Brightness
Use the Directional Select to choose either YES or NO.
Contrast
Auto Config
NO
Dithering
10
Image (n/a)
ON
1 : Exit
1 : Exit
Auto Config
YES
OSD Timeout
20
NO
1 : Exit
1 : Exit 2 : Select
1 : Exit
Input
Select
YUV Colour
Main Menu OSD
Information
720 x 240
V. 60.0 / H. 17.7
Miscellaneous
Save Settings
OSD Position
H-Position
V-Position
1 : Exit
Save Settings
YES
10
1 : Exit
:: adjusts black level
CONTRAST
:: adjusts contrast level
COLOR
:: function not available
IMAGE POSITION
:: function not available
IMAGE
:: function not available
AUTO CONFIG
:: automatic configuration
INFORMATION
:: displays LCD system configuration
MISCELLANEOUS
:: Selects: Factory Reset, OSD Timeout,
OSD Position, Dithering & Native Mode
INPUT SELECT
:: S-Video, Analog, Digital and Video functions
may not be available depending of model.
VIDEO
:: Adjusts; Hue, Saturation, H-Position
and V-Position
YUV COLOR
:: Adjusts; brightness, black level, contrast, saturation, hue and flesh tone
SAVE
:: Saves LCD settings
1 : Exit 2 : Select
Displays screen information.
Brightness
BLACK LEVEL
Use the Directional Select to adjust preset number.
Use the Directional Select to choose either YES or NO.
Video
:: adjusts brightness level
Use the Directional Select to choose either ON or OFF .
Use the Directional Select to make adjustments.
Information
BRIGHTNESS
Use the Directional Select to choose either horizontal or vertical.
Native Mode
NO
ON
1 : Exit
1 : Exit
Use the Directional Select to make adjustments.
Use the Directional Select to choose either YES or NO.
LIMITATION OF IMPLIED WARRANTIES
WARNING
FCC INFORMATION
be placed in original packaging, and may
include product manuals and other
accessories. No MASS product will be
accepted for repair without a RMA number.
For any returned merchandise we will be
responsible for shipping cost incurred on the
first 30-days. After 30-days MASS will only be
responsible for shipment costs to return the
merchandise to the purchaser. Any additional
shipping costs incurred after 90-days of
original purchase date will be the sole
responsibility of the purchaser.
There are no warranties, express or implied, which extend beyond the description contained
herein including the implied warranty of merchantability and fitness for a particular purpose.
Handling the cord of this product will expose you to lead, a chemical to the State of California
to cause [cancer, and] birth defects or other reproductive harm. Wash hands after handling.
This equipment has been tested and found to comply with the limits for a Class B digital devices,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
No other warranties are expressed or
implied, including but not limited to, any
implied warranties of merchantability or
fitness for a particular purpose. In no event
shall MASS be liable for consequential or
incidental damages resulting from the use or
installation of any MASS product, or the
breach of any express or implied warranties.
MASS' liability to purchaser with respect to
any claim or loss arising out of this
transaction or alleged to have resulted from
an act or omission of MASS shall be limited to
purchasers' cost of the MASS product.
2. Any other damages, whether incidental, consequential or otherwise.
Increase the separation between the equipment and receiver
3. Any claim against the customer by any other party.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
For MASS Inc. products sold outside North America, contact your MASS Engineered Design Inc.
Dealer warranty information and service.
Consult the dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY
Definitions.
i. "We", "us" and/or "our" means MASS
Engineered Design Inc. ("MASS").
ii. "You" or "your" or "purchaser" means
the individual or entity named on the
invoice.
MASS Engineered Design Inc. warrants to
the original consumer purchaser
("purchaser") of this product that the MASS
product purchased shall be free from defects
in materials and workmanship for a period of
3 years of normal use. This warranty does not
cover any incom-patibilities due to the
purchaser's computer, hardware, software or
any other config-uration in which the product
interfaces. If a defect covered by this limited
warranty occurs, MASS, at its option, will
repair or replace the defective MASS product
free of charge.
MASS reserves the right to replace any
defective MASS product with product of
equivalent or superior performance. Such
replacement product may be
remanufactured product or manufactured
using remanufactured components at MASS'
option. Repaired or replaced product will be
covered by the same warranty.
This 3-year warranty does not apply to
defects caused by abuse, misuse,
negligence, accident, tampering,
modification or other causes not related to
defective materials or workmanship. MASS
reserves the right to impose a reasonable
charge for the repair of products returned with
defects resulting from any of the above
causes and for returns where the product is
found to be in good working condition.
Return Policy. To return merchandise, you
must obtain an RMA number. Please call the
MASS customer service department and
provide the invoice number, item description,
and serial number(s) of the merchandise you
wish to return. Returned merchandise must
Use the Directional Select to choose either ON or OFF .
EXCLUSION OF DAMAGES
MASS Engineered Design Inc.’s liability is limited to the cost of repair or replacement of the
product. MASS Engineered Design Inc. shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon
inconvenience, loss of use of the product, loss of time, loss of profits, loss of business
opportunity, loss of goodwill, interference with business relationships, or other commercial
loss, even if advised of the possibility of such damages.
Some states do not allow the exclusion of consequential or incidental damages, so the above
exclusion may not apply to you. This warranty provides you with specific legal rights. You may
have other rights that vary from state to state.
CAUTION: To prevent electric shock, do
not remove cover. No user-servicable
parts inside. Refer servicing to qualified
service person. For home and office use.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN ENCLOSURE
Reorient or relocate the receiving antenna
Ensure the area around the monitor is clean and free of moisture
APPROVALS
US
C
IBM XT, AT, 386, 486 and PS/2 are registered trademarks and/or trademarks of International
Business Machines Corporation
CUSTOMER SUPPORT
MASS Engineered Design Inc. can be
reached in the following ways:
Windows is a registered trademark of Microsoft Corporation
Pentium is a trademark of Intel Corporation
474 Wellington Street West, Toronto,
Ontario, Canada M5V 1E3
WARRANTY
Email:
[email protected]
Web:
www.massmultiples.com
www.massedi.com
Phone:
Fax:
(416) 593-4663
(416) 593-5262
Macintosh and Power Macintosh are registered trademarks of Apple Computer Inc.
1•888•603•9858
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of more of the following measures:
VESA is a registered trademark of Video Electronics Standards Association. DPMS and DDC are
trademarks of VESA.
© 2003-2005 MASS Engineered Design Inc. reserves the right to change product specification
and documentation without notice. MASS shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing
this material, or the performance or use of this product. This document may not copied,
reproduced or transmitted by any means in whole in part, for any purpose without the express
written permission of MASS EDI. All rights reserved. All MASS Multiples™ product are protected
by US Patents: RE. 36,978 | 5,687,939 | US 6,343,006 B1 | 2384 611
FCC WARNINGS:
Changes or modifications not expressly approved by MASS INC. could void the user's
authority to operate the equipment.
FOR YOUR RECORDS
The serial number of this product is on the
back of the monitor. Write the serial number
of this unit in the space below and keep this
booklet as a permanent record of your
purchase to aid in identification in the event of
theft or loss.
Product Name: DUAL FORMAT M.V.S.
Model: C2H15D
Serial Number(s):
Purchase Date:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement