Allied Pages - Lehman, Inc.
Fountain Solutions
Alcohol Replacements
Drying Aids
Plate Cleaners
Gums & Developers
Blanket & Roller Washes
Metering Roller Cleaners
Problem Solving Products
Filters
ALLIED Pressroom Products
FOUNTAIN SOLUTIONS
FOUNTAIN SOLUTIONS
All Star Fount & Alcohol Replacement — 10379
Concentrated Fountain Solution Alcohol Replacement
Use one concentrated fount where previously high dosage 1 or
2 part founts and alcohol substitutes were used. Many performance
enhancing ingredients have been incorporated into the formula to
prevent problems before they can happen and ensure consistent
performance 100% of the time.
Dynafount Neutral Plus — 10076
• Excellent wetting and viscosity building properties,
reduces surface tension to the low 30s
• Increased dryer content ensures shorter dry times,
even on non-porous substrates
• Increased gum and desensitizer ensures fast start-ups
and less plate sensitivity on long press runs.
• Suitable for all offset inks including UV/EB
• Compatible with all metal plates, conventional, CtP and non-metal laser plates
4-Gallon/Case 5-Gallon 55-Gallon
• Buffered to a stabilized alkaline pH
• Helps to print denser colors • Made for high-speed webs
All Star Ultra Fount — 10033
Concentrated Fountain Solution Alcohol Replacement
ALL STAR ULTRA is an evolution based on Allied’s successful
ALL STAR Fountain Solution & Alcohol Replacement.
• Excellent wetting and viscosity building properties,
reduces surface tension to the low 30s
• Increased dryer content ensures shorter dry times,
even on non-porous substrates
• Increased gum and desensitizer ensures fast start-ups
and less plate sensitivity on long press runs.
• Suitable for all offset inks including UV/EB
• Compatible with all metal plates, conventional, CtP and non-metal laser plates
4-Gallon/Case 5-Gallon 55-Gallon
Dynafount Alkaline — 10080
Alkaline Based Fount
For newspaper and insert printers running cold and heat set webs.
Strongly buffered to maintain an alkaline pH in all water conditions.
Its good wetting characteristics and desensitization properties will
keep water settings to a minimum. During press stops it will ensure
the plate stays desensitized and free from oxidation.
• Buffered to a stabilized alkaline pH
• Helps to print denser colors • Made for high-speed webs
55-Gallon
Dynafount M — 10071
4-Gallon/Case
5-Gallon
30-Gallon 55-Gallon
Dynafount 7M — 10401
Fountain Solution Alcohol Replacement
An extremely high quality and versatile fount designed for high
speed alcohol free printing. Is wet enough to be used as a fountain
solution/alcohol replacement. The wetting characteristics allow for
a low dynamic surface tension which will minimize water speeds.
contains components to eliminate chemical plate blinding and mold.
• Contains extra gums and pH stabilizers • Keeps reverses open
• Reduces water speeds while lubricating the plate and blanket
• Helps keep metering rollers and blankets clean
4-Gallon/Case 5-Gallon 30-Gallon 55-Gallon
Neutral Based Fount for Newspaper and Insert
For newspaper and insert printers running cold and heat set webs.
Strongly buffered to maintain an alkaline pH in all water conditions.
Its good wetting characteristics and desensitization properties will
keep water settings to a minimum. During press stops it will ensure
the plate stays desensitized and free from oxidation.
55-Gallon
Dynafount Neutral Super Concentrate — 10376
5-Gallons makes 55-Gallons of Concentrated Fount
A 5-gallon pail makes 55-gallons of high quality neutral fountain
solution with a two to three ounce per gallon of water dosage.
The result of the finished neutral fountain solution is the same as
if it were a standard neutral produced at Allied. Saves cost, space,
time and freight. Allied supplies the Neutral Super Concentrate,
the user supplies the water!
• Reduces storage and freight by 10X • Economical price
• Keeps water setting to a minimum
• Good wetting and desensitizing properties
5-Gallon
E.G. Green — 10097
Super Concentrated High Performance Fountain Solution
A very concentrated formula that eliminates fount related problems
before they can happen, allowing consistency in print. Opens tiny
hairline reverses, even using metallic inks. Opens halftones and
screens, helps to reduce overall dot gain. Stable buffering system assures less pH and conductivity drift.
• Contains: calcium inhibitors and corrosion inhibitors
• VOC level of only 0.3 pounds per gallon
4-Gallon/Case 5-Gallon 30-Gallon 55-Gallon
Enviro Fount Powders
A series of High Quality Powder Base Fountain Solutions
Requires 10% of the space and weighs about 87% less than liquid
founts. Reduces storage costs while its environmentally friendly
composition eliminates the need for storage of empty containers.
• Contains no listed hazardous ingredients
• Use with metal, ployester (laser & silver imaged) plates
• Gallons come pre-packed with powder fount, just add water
Enviro Powder 4 — 10285
4-Gallon/Case 30-Gallon
Enviro Powder 5 — 10501
4-Gallon/Case 30-Gallon
Enviro Powder 6 — 10502
4-Gallon/Case
ALLIED
Pressroom Products
FOUNTAIN SOLUTIONS
FOUNTAIN SOLUTIONS
Fountain Additive Metal Plate Cleaner — 10023
Press Control CtP+ — 10030
Eliminates many major fount related problems
Add into any acid based fountain solution to eliminate plugging
problems. Helps run metallic inks with the ease of regular ink,
reduces water settings, prints dense solids and helps to eliminate
ghosting. Use as a fountain additive can make the difference between
dull looking and sharp, clean halftones. Helps to stop scratches, scum
and oxidation before they can occur and to remove once they do.
• Cleans & desensitizes on every revolution of the plate cylinder
• Eliminates scratches before they print
• Eliminates scumming, oxidation and plugging problems
• Keeps reverses sharp and line screens clean
12-Quart/Case 4-Gallon Case
Four Star — 10079
Super Concentrated Fountain Solution
Produces and maintains the highest quality printing. So concentrated
that dosages range from 1/2 to 1 ounce per gallon of water. Every
performance enhancing material known to Allied has been added,
which is why it weighs more than other founts. It is possible to see
the difference on the finished sheet simply by changing to FOUR
STAR.
• Keeps dot gain to a minimum • Better control of water/ink balance
• Use on metal & polyester plates, with conventional and UV inks
• Stabilized (buffered) pH to reduce pH drift
• Contains anti-corrosion, anti-bacterial and mold inhibitors
4-Gallon/Case 5-Gallon 30-Gallon 55-Gallon
High Fidelity — 10057
Concentrated Fountain Solution Alcohol Replacement
Allied’s superior fount technology based on industry proven fountain
solutions that replace alcohol.
• VOC content of 30% • Wetting with lubrication • Stabilized pH
• Suitable for all offset ink including UV/EB
• Dynamic surface tension in the 30s ensures a flatter water film
• Contains corrosion inhibitors, anti-mold, anti-fungal ingredients
• Compatible with all metal plates, CtP, conventional and non-metal laser plates
4-Gallon/Case 5-Gallon 55-Gallon
LA 1157— 10091
Formulated for maximum performance on high-speed web and sheet
fed presses. Provides fast startups and consistent color throughout the
run. Excellent wetting and viscosity building properties. Highly stabilized buffering system to minimize drift. Razor sharp reverses, cleaner screens, improved ink trapping, denser solids.
• Contains corrosion inhibitors, anti mold and anti fungal ingredients
• Compatible with all metal plates, optimized for CtP
5-Gallon 55-Gallon
Fountain Solution / Alcohol Replacement
Designed for use with CtP plates. Contains extra lubrication and
wetting agents. Contains a balanced blend of the appropriate acid/salt
combination providing a stable pH in all waters with little or no drift.
Keeps plate background coated with a thicker water film to ensure
stable water settings.
• Use as a fountain solution and alcohol replacement
• For use on all CtP / violet & polyester plates
• For use on sheet-fed and web presses
4-Gallon/Case 5-Gallon 30 and 55-Gallon
Press Control EWM — 10030
Fountain Solution / Alcohol Replacement
Builds good water viscosity to keep plate background wet while
providing a low dynamic surface tension, assuring reduced water
settings. Contains humectants to prevent premature drying of the
printing plate during brief shut downs. Contains a balanced blend
of the appropriate acid/salt combination providing a stable pH in
all waters with little or no drift.
• Use as a fountain solution and alcohol replacement
• For use on all CtP / violet & polyester plates
• For use on sheet-fed and web presses
4-Gallon/Case 5-Gallon 30-Gallon 55-Gallon
SA8-C — 10279
Produces and maintains the highest quality printing. Designed for
critical sheet fed and web-offset applications. The high level of
desensitizing salts and gums ensure clean, consistent printing at all
times.
• Keeps dot gain to a minimum • Better control of water/ink balance
• Use with CtP or conventional plates and conventional or UV inks
• For high speed sheet fed and web presses
5-Gallon 30-Gallon 55-Gallon
Unifount — 10122
For use with Polyester (laser) / Polyester Silver Imaged Plates
Permits stable ink/water balance to be achieved at lower ink and
water settings. Cleaner, sharper and brighter colors result, with no
tinting. Formulated to run with integrated dampening systems
common on smaller presses. Use with metal and polyester plate
systems. Contains a balanced pH buffering system which ensures
ittle or no pH drift. Contains materials to guard against mold growth
and chemical plate blinding.
• Fast start ups result in more salable sheets
• Use with Polyester (laser & silver image) and metal plates
• Compatible with oil and rubber based inks
4-Gallon/Case
Universal #1 — 10364
Digital Metal, Polyester and Conventional Plates
Permits stable ink/water balance to be achieved using both polyester
and metal plates. This means cleaner and faster start-up, less ink
breakdown and less ink build-up on metering roller and blankets.
Keeps a good film of water on the plate background while ensuring
good plate desensitization. When changing to or from polyester to
metal plates, no changes are necessary. Use same dosage and start up.
• Inks print and stay dense • Inhibits excess water pick up in inks
• Faster start up produces more salable sheets
4-Gallon/Case 5-Gallon 30-Gallon 55-Gallon
ALLIED Pressroom Products
ALCOHOL REPLACEMENTS
Hydromatic — 10335
GUMS & DEVELOPERS
When added to mixed fountain solution reduces surface tension to
the low 30s and creates extra viscosity within the water. It is the
viscosity that ensures performance as press speeds go faster and
longer. Recommended when other alcohol replacements cannot
keep the plate background wet and clean while maintaining low
water settings during press runs.
• Provides extra viscosity within the water • Use with any fountain solution
• For use on sheet-fed or web equipment
4-Gallon/Case 5-Gallon 30-Gallon 55-Gallon
Hydro Dyne — 10142
A non EB (Ethylene Glycol Mono Butyl Ether) alcohol replacement
geared towards the users of UltraViolet ink. Although EB is used in
many other ARs, it is also used as a good portion of UV Wash and
therefore can attack UV inks.
• Usable with any fountain solution • Use on sheet fed or web
• Reduces surface tension to low 30s • Reduces or eliminates blanket piling
4-Gallon/Case 5-Gallon 30-Gallon 55-Gallon
Gum Arabic 14°° Be — 10032
Pure micro-filtered gum using the highest quality gum arabic. Blended with purified water and micro-filtered to ensure no contaminants.
A food grade biocide is added to ensure long-term quality and freshness is maintained.
4-Gallon/Case
NAS Gum — 10216
Non-Asphaltum Storage Gum
An easy to use emulsion of solvents, gums and resins. In one step
it will clean, gum and apply a protective film to the plate surface.
Once treated the plate may be stored for extended periods of time
depending on temperature and relative humidity.
• Thick enough to be used without spreading or running down the plate cylinder
• Easy to apply, dries evenly • No need to buff
• Good ink solvency for fast ink removal
• Remove with water wash
12-Quart/Case 4-Gallon/Case
PSG — 10019
Hydro Plus— 10070
Used by printers world wide. Provides excellent overall balance
between the wetting and viscosity needed to successfully replace
alcohol and keep water settings at a minimum. Add to any fountain
solution for the total replacement of alcohol.
• Proven formula for use with all fountain solutions
• Reduces piling • Reduces surface tension to the low 30s
• For use on sheet fed and web equipment
4-Gallon/Case 5-Gallon 30-Gallon 55-Gallon
DRYING AIDS
Fountain Dryer — 10060
Super Concentrated Liquid Dryer
Only a small dose of this super concentrate need be added to any
premixed fountain solution. Once added to the fountain solution
water, ink will start to oxidize (dry) the top layer.
• Creates faster drying of heavily printed jobs
• Starts the drying process as water mixes with ink
• Use for hard to dry jobs • Mixes into any fountain solution
• Use with all oil and rubber base inks • Very low dosage needed
4-Gallon/Case
Turbo Dry — 12043
Multi Level Ink Dryer
Compatible with all oxidation / conventional drying inks. Typically
a 7% addition (1 ounce per pound of ink) will halve the drying time,
even with the notoriously difficult Reflex Blue. In laboratory and
press tests with transparent yellow at relatively high dosages TURBO
DRY had no discernable effect on hue or color level of the ink. Blind
tests by a leading American ink manufacturer showed improvement
in the rub and scuff resistance of the printed ink film.
12-Pint/Case
12-Quart/Case
X + Y = DRY — 10062
Fast Acting Powerful Drier — Dries reflex blues fast & thoroughly
Deals with an old problem in a different way by 2 unique processes.
Oxygen is created and released throughout all ink layers as soon as
the treated ink comes into contact with the fountain solution / water
at the plate. At the same time, powerful paste driers promote rapid
drying on all layers of the ink. Gives a complete curing (drying),
not a simple drying of the surface layer. Allows jobs to be backed
up quickly while giving inks good scuff resistance.
Package contains 1 tube of X and 1 tube of Y
Brown Asphaltum Plate Storage Gum
A combination of solvents to remove ink from the plate, microfiltered Gum Arabic to protect and leave the non-image area of the
plate water receptive and Asphaltum to protect the image area and
maintain ink receptivity. Large amounts of gum arabic and asphaltum
in the product assure the printer of a quick and clean start-up after the
plate is taken out of storage and washed of for use again.
• Stores plates for a few hours, a few months or even a few years
• Easy to apply, dries evenly • Washes off quickly • No need to buff
12-Quart/Case 4-Gallon/Case
NFS Finishing Gum— 10211
A blend of gums with added desensitizers to protect plates for short
term storage. Contains ingredients to eliminate gum streaks. Use in
processors or by hand.
4-Gallon/Case
5-Gallon
4-Gallon/Case
5-Gallon
SFA Negative Developer— 10215
Universal Negative Developer— 10207
For use with both grained and smooth metal plates
Fast acting negative developer, leaves a clean background and
preserves image contrast. Go from developement to press in as
short a time as possible. Added gum content eliminates the need
to rinse and gum the plate post developement. Plate can be safely
kept overnight before running. For longer storage before use Allied
recommends the more traditional rinsing off with water, followed
by the application of Allied’s Negative Finishing Gum (10211).
• Fast acting • Use as a 2-in-1 developer
4-Gallon/Case
5-Gallon
ALLIED
Pressroom Products
PLATE CLEANERS
PLATE CLEANERS
CTP-C — 10028
Plate Fix — 10099
Prevent unnecessary plate remakes
Metal Plates - A super desensitizer and scratch remover developed
to keep ink from returning to unwanted areas of the plate. Counteracts chemical plate blinding and gum streaks caused by improper
gumming, and also removes oxidation and scumming.
For best results, test PLATE FIX on the plate before use.
Polyester Plates - Use as a plate starter, cleaner, and conditioner to
keep the plate background for picking up unwanted ink.
Plate Cleaner, Conditioner, Scratch Remover
Able to perform well on a wide variety of unbaked and baked plates
without causing image degradation. Contains a blend of desensitizers,
wetting agents and non image film formers, all to ensure removal of
scratches, scumming/toning, while raising the water resceptivity of
the plate background.
• For use with trigger sprayers or by hand
• Will not cause image damage like heavily alkaline plate cleaners
12-Spray Quart/Case 5-Gallon
Dynamight CTP — 10042
Cleaner, Preserver, Scratch Remover
Has been chemical resistance tested with most known major CtP
plates, showing no image degradation. Cleans plates, removes
sensitive areas and is used for plate storage. Leaves a water receptive
film on the non-image area ensuring fast start-up each time it is used.
• Mild on plates • Short term storage
• Desensitizes the plate
12-Quart/Case
Hydro Image — 10245
Plate Cleaner, Conditioner and Scratch Remover
Contains a proprietary blend of acids which completely desensitize
the non-image area of the plate while helping to remove calcium
deposits. The pure gum used, along with the special humectants
and water-attractive film formers, ensure a highly water receptive
non-image area.
• Removes severe scratches, scumming and oxidation
• Ensures water receptivity of plate background
• Prevents and removes ink buildup on chrome pan rollers
12-Quart/Case 4-Gallon/Case
Universal Plate Cleaner — 10008
For conventional and thermal baked/unbaked plates
Developed as a plate cleaner/desensitizer, heavy duty scratch
remover, and short term storage gum that performs on the many
types of plates available. Using a blend of mild solvents, UPC
quickly lifts and removes inks. Contains a unique blend of acid
to ensure fast and complete desensitization and dissolves and
removes any calcium that has attached to the plate image.
Deep violet color helps the user clearly see where it has been
applied during cleaning or when applying to plates for storage.
12-Quart/Case
Vanish Extra Strength — 10093
• Cleans and removes scratches and oxidation
• Cuts and removes ink quickly • Removes calcium deposits
• Provides short term plate storage
12-Quart/Case
Plate Cleaner, Conditioner and Scratch Remover
An alkaline creamy emulsion scratch remover and plate cleaner that
will remove ink fast and condition the non-image area to stay water
receptive. Can be used by hand or with trigger spray to clean plates
on the run.
PC 93 — 10152
• Cuts through and removes ink quickly • Removes oxidation
• Desensitizes deep scratches • Leaves non-image area water receptive
12-Quart/Case
Heavy Duty Scratch Remover & Plate Cleaner
Contains a small amount of tiny spherical abrasives that make it a
heavy-duty scratch remover and plate cleaner. It is an acid based
emulsion. Will not cause blinding. Lifts and removes ink from the
plate quickly while desensitizing and wetting the plate background.
12-Quart/Case
Plate Ace — 10015
Acid Based Plate Cleaner for CtP Technology
Plate Ace is thicker and contains far more, by percentage, of
desensitizing acids, emulsifiers, film formers and gums than most
other plate cleaners. Allied has added metal conditioners to allow
the desensitizing acids to get into sensitive areas faster and be more
efficient.
• Removes oxidation, scum and scratches • Cleans & conditions plates
• Stable emulsion which is not likely to separate
12-Quart/Case
ALLIED Pressroom Products
BLANKET & ROLLER WASHES
BLANKET & ROLLER WASHES
A Wash — 10164
Daily Wash 2050 — 10325
Developed for automatic blanket cleaning systems. It is a premium
blanket and roller wash for all applications. Lifts and removes inks
and other contaminants quickly from blankets nand rollers.
Has a low odor, is water miscible, and leaves no residue behind.
Non-Water Miscible Blanket and Roller Wash
A non-water miscible blanket and roller wash with good cleaning
qualities and a low odor. Helps remove the excess surfactant built
up within rollers from other water miscible washes and fountain
solutions.
• Medium evaporation time
• Up to 25% water miscible
• Mild with good cutting power
• Approved for use by Baldwin
5-Gallon 55-Gallon
• Medium evaporation
• Leaves no graesy residue
• Low odor • Ideal for use with larger format presses
55-Gallon
ABW 68 — 10240
Built for automatic blanket cleaning systems. A premium blanket
and roller wash for all applications. Has a low odor, a flash point
of 145°F, is water miscible and leaves no residue behind.
• Use by hand or in automatic blanket wash systems
• Good cutting power for total cleaning
5-Gallon
Daily Wash 2500P— 10234
Water Miscible Blanket and Roller Wash
An everyday wash that is a good basic cleaner which will lift
and remove ink from blankets and rollers. Adding 10-30% water
enhances performance.
Allied Orange Wash — 10097
• Low odor • Leaves no greasy residue • Carries up to 30% water
• Ideal for use with larger format presses • Good evaporation
5-Gallon 55-Gallon
FOGRA approved Automatic Blanket and Roller Wash
While Allied Orange Wash was made for automatic washup systems,
it is truly a premium blanket and roller wash for all applications.
Lifts and removes inks and other contaminants quickly, has a low
odor, and with conventional use, is up to 50% water miscible.
Daily Wash 2550— 10326
Water Miscible Blanket and Roller Wash
An everyday wash that is a good basic cleaner which will lift
and remove ink from blankets and rollers.
55-Gallon
• High flash point of 145°F by TCC • Low odor • Deep cleans
• Up to 50% water can be added for conventional use
• Approved worldwide by FOGRA
5-Gallon 55-Gallon
• Medium evaporation
• Leaves no greasy residue • Low odor
• Ideal for use with larger format presses • Add up to 20% water
55-Gallon
Daily Wash 3000Q— 10322
6-Gallon/Case 5-Gallon
Blanket Conditioner — 10230
Deep cleans blankets while impregnating them with plasticizing
agents. This leaves the blanket free of friction glaze, gum glaze,
paper glaze and paper dust. Will help to maintain print quality
and extend blanket life.
• Leaves blankets feeling like new
• Use as a last wash at the end of the day to condition blankets
6-Gallon/Case 55-Gallon
Blast — 10026
A powerful water miscible treatment. Assures quick color changes
from black to yellow with just one wash. Use it for deep cleaning or
to allow the plasticizers to add life and resiliency to rollers and blankets. One wipe with BLAST removes ink, gum glaze, friction glaze,
paper coatings and lint. All while leaching plasticizing agents back
into blankets and rollers for a longer more effective life.
6-Gallon/Case 5-Gallon
55-Gallon
Blitz — 10114 ◆ HAZMAT
For the printer who needs a medium/fast dry wash. Produced using
premium raw materials so it does what its name implies - Blitzes off
ink and other contaminants from blanket and rollers.
• Low odor • Ideal for all presses
• Does not leave a residue on rollers or blankets
5-Gallon
55-Gallon
Color Wash— 10146
A highly water miscible, fast acting blanket and roller wash with a
pleasant citrus odor that removes ink, paper coating and paper lint.
• Deep cleans blankets and rollers • Water miscible
• Will not leave a greasy residue on blankets or rollers
5-Gallon
55-Gallon
55-Gallon
Excel— 10233 ◆ HAZMAT
Rubber Rejuvenator Glaze Remover
A rubber rejuvenator and glaze remover in one product. It removes
many types of glaze build up on blankets and rollers. Leaves rollers
feeling clean and smooth and keeps them from hardening due to friction, gum and paper coating glazes.
• Fast evaporation • Non water miscible • Low odor
• Cleans without damaging blankets and rollers
6-Gallon/Case 5-Gallon
55-Gallon
Hydro Wash— 10235
Super Concentrated Water Miscible Blanket & Roller Wash
Designed to be mixed with 40-60% water. The nature of the resulting
emulsion is such that oil and water cased contaminants are pulled
from rollers and blankets at a faster/deeper rate than with standard
press wash. Removes ink, paper coating, paper glaze, dried gum,
friction glaze, oil and water based surfactants. Lowers VOCs.
• With 60% water added each gallon produces 2.5 gallons of wash
• Low Odor • Multi-purpose cost effective wash
5-Gallon 55-Gallon
Hybrid Wash— 10005
Blanket and Roller Wash for Hybrid Ink
A blend of solvents specially formulated for use with hybrid inks.
Can also be used on most conventional inks and some UV inks.
• Deep cleans blankets and rollers • Leaves no greasy residue
• Cleans without damaging or distorting buna-nitrile rubber
5-Gallon 55-Gallon
ALLIED
Pressroom Products
BLANKET & ROLLER WASHES
METERING ROLLER CLEANERS
MRC - ANC — 10077 ◆ HAZMAT
Quick Change — 10162
6-Gallon/Case 5-Gallon
55-Gallon
S-100 Wash — 10078
A good basic cleaner which will lift and remove ink from blankets
and rollers. Does not contain surfactants which can build up in the
ink roller train and cause water logging, stripping or blinding of plate
image. Helps pull surfactants out of the rollers, which can cause water fluctuation during press runs.
• Leaves no graesy residue • No harsh odors
5-Gallon
55-Gallon
UV Plus II — 10436
Concentrated Ultra Violet Ink Wash
Allied spent a considerable amount of time looking at the
components of various UV washes and found that in many cases
the formulations were identical, or extremely similar. It was also
discovered that many companies claimed their washes removed
UV inks when they would remove only certain colors. Others
washes examined removed all UV colors well, but caused damage
to rollers and blankets in a relatively short period of time. Using this
information Allied developed a dedicated wash for all UV inks that
was not as aggressive to the compounds used to manufacture rollers
and blankets.
• Removes all UV ink colors quickly • Deep cleans rollers & blankets
• Not as detrimental to rollers and blankets as many other washes
5-Gallon 55-Gallon
UV Wash A— 10435
Ultra Violet Ink Wash for Automatic Wash -Up Syatems
Allied spent a considerable amount of time looking at the
components of various UV washes and found that in many cases
the formulations were identical, or extremely similar. It was also
discovered that many companies claimed their washes removed
UV inks when they would remove only certain colors. Others
washes examined removed all UV colors well, but caused damage
to rollers and blankets in a relatively short period of time. Using this
information Allied developed a dedicated wash for all UV inks that
was not as aggressive to the compounds used to manufacture rollers
and blankets.
Fast Acting, Fast Evaporating Metering Roller Cleaner
Removes ink and other contaminants quickly and thoroughly from
metering and other dampening rollers. Extra fast evaporation rate
guarantees that no solvent residues enter the dampening system.
Removes ingrained ink vehicle which can lead to ink feed back
on dampening rollers.
• Contains no methylene chloride
6-Gallon/Case 5-Gallon
55-Gallon
MRC 88— 10261 ◆ HAZMAT
Low Vapor Pressure, Non-Chlorinated Metering Roller Cleaner
A low vapor pressure, deep cleaning metering roller cleaner used to
remove ink and other contaminants. Has no chlorinated solvents yet
maintians good evaporation characteristics.
• Contains no methylene chloride or 1,1,1-trichlorethane
6-Gallon/Case 5-Gallon
55-Gallon
Meter X III— 10017 ◆ HAZMAT
Non-Chlorinated Metering Roller Cleaner
Removes ink and other contaminants quickly from metering and
other dampening rollers. Fast evaporation rate guarantees that no
solvent residues enter the dampening system. Removes ingrained
ink vehicle which can lead to ink feed back on dampening rollers.
• Contains no methylene chloride or 1,1,1-trichlorethane
6-Gallon/Case 5-Gallon
55-Gallon
Daily MRC— 10334 ◆ HAZMAT
Metering Roller Cleaner
Removes ink from metering and other dampening rollers. Fast
evaporation guarantees that no solvent residues enter the dampening
system. Removes ingrained ink vehicle which can lead to ink feed
back on dampening rollers.
6-Gallon/Case 5-Gallon
55-Gallon
• Removes all UV ink colors quickly • Deep cleans rollers & blankets
• Not as detrimental to rollers and blankets as many other washes
• Suitable for use in automatic systems
5-Gallon 55-Gallon
Xtreme Clean — 10038
Up to 50% water-miscible wash
A water miscible blanket and roller wash that can accomodate an
equal volume of water without sacrificing perfromance. Dissolves
ink quickly and removes dried gum and paper contaminants from
blankets and rollers.
• Low odor
• Medium/fast evaporation • Leaves no greasy residue
55-Gallon
◆ HAZ Indicates item is subject to Hazardous Material Surcharge
ALLIED Pressroom Products
PROBLEM SOLVING SPECIALTY PRODUCTS
PROBLEM SOLVING SPECIALTY PRODUCTS
Anti Foam — 10055
Dynaklean — 10061
Deep cleans, deglazes and conditions ink rollers
Ink rollers can become contaminated from ground in ink, gum
and friction glaze, paper coating, and surfactant deposits. These
contaminants cause uneven ink transfer, over emulsification of inks,
and premature roller hardening. When used regularly, Dynaklean a powerful, white liquid concentrate - will deep clean, deglaze, and
condition ink rollers, eliminating the need for a harsh glaze remover.
12-Quart/Case
Fresh Start Aerosol — 10407 ◆ HAZMAT
Anti-Skin Spray
Will keep ink from drying out on rollers. The spray head allows for
a fine mist, coating the ink enough to keep it wet but not too much
so as to braek it down
• Fine, even mist in an aerosol can • Reduces start-up waste
• Spray on blankets before start-up to reduce the tack for quick release
12—16-Ounce Aerosol/Case
Anti Ox II Liquid — 10405
Anti-Skin Ink Spray in Trigger Spray Bottle
Use to keep ink from skinning over when the press is idle. Spray on
blankets to remove tack before start ups. Bring color up on webs
faster, reducing paper waster, by spraying it onto the ink forms
when starting up.
• One quart can replace 4 to 5 aerosol cans
9 -Quart/Case 6-Gallon/Case
AQ Coating & Shop Cleaner — 10411
Cleaner for Water Based Coating Units & Press Side Frames
Thoroughly cleans water based coating systems and units. Use to
remove ink from the press framework, floors and other areas of the
pressroom.
• Super concentrated • Easy to use, fast acting • Low VOCs
12-Quart/Case 4-Gallon/Case
Bubba Scrub Hand Cleaner— 10333
Non-petroleum based citrus scented hand cleaner with lanolin.
Quickly removes deep ground-in ink, grease and dirt. Contains
lanolin to put back into hands what pressroom chemicals take
out during the day. Can be used with or without water.
• Will not leave hands feeling dried out
• Leaves a pleasant scent on hands
4—7 Pound Cans/Case
C R D — 10610
Chrome Roller Desensitizer
Keeps ink from building up on metering and dampening rollers.
A blend of micro-filtered gum and desensitizers makes CRD an
effective, long lasting treatment for all dampening and metering
rollers. Used on a regular basis it will minimize ink build up and
maintain a highly water receptive film at the roller surface.
• Easy to apply
• Long lasting
• Quickly lifts and removes ink • Allows for quick color changes
• Deep cleans rollers beyond just the surface
• Contains plasticizers to condition ink rollers
12-Quart/Case 4-Gallon/Case
Dynastat — 10012
5-Gallon
EC RC Roller Cleaner — 10068
Use when switching from conventional to EC inks
Contains ingredients that are complimentary to EC ink. Promotes
proper transfer of EC inks when used as directed. Aids in transition
of conventional to UV, saving time. Roller cleaner and conditioner
for EC ink.
12-Quart/Case
Hand Scrub — 11333
Not just another hand cleaner
Cleaning hands no longer requires the use of harsh and potentially
harmful chemical solvents. Hand Scrub uses a combination of
small spherical scrubbing beads and detergents. The washing action
activates the beads which work to lift ingrained soils from the skin, at
the same time detergents suspend ink, grease and dirt particles while
conditioning the skin. A simple rinse with water removes all residues.
4—3 Pound Cans/Case
Ink Repellant — 10102
Prevents unwanted pick up of ink on impression cylinder
Designed to reduce/eliminate the unwanted accumulation of ink on
the impression cylinder. Will help prevent the picking and piling
problems associated with those heavy coverage 2-sided jobs. For the
surface on paper cutter beds it removes all the oxidation that has built
up over the years, leaving a slick surface to slide paper over.
• Effective longer than silicones or waxes • Easily applied
• For use on paper cutter beds and jogging tables
12—8 Ounce Tubes/Case
12-Quart/Case
C R U D — 10168
Roller Cleaning Paste Restores Performance to Inking Rollers
Designed for use on rubber inking rollers. Ideal for use where
thorough removal of all pigment residues is required, such as on
critical color changes. Regular use as part of a roller maintenance
program can ensure that rollers remain in optimum condition.
• Reduces down time and waste at start-up • Low odor
• Conatins no abrasives • Can be left on rollers overnight
12 —2 Pound Cans/Case
Liquid Muscle Chain Cleaner & Lubricant — 10620
A concentrated delivery chain cleaner and lubricator. Use it to clean,
remove and lubricate dirty delivery chains. Removes built up spray
powder, paper dust and other air-born contaminants that adhere to
the delivery chain.
• Removes dried spray powder and gunk • Easy to use, fast acting
• Leaves a coating of protective lubricant
• Consistent use helps chain to move smoothly
12-Quart/Case 6-Gallon/Case 5-Gallon
Mold Stop — 10020 ◆ HAZMAT
12-Quart/Case
Non-Piling Additive — 10127
5-Gallon
55-Gallon
ALLIED
Pressroom Products
PROBLEM SOLVING SPECIALTY PRODUCTS
PROBLEM SOLVING SPECIALTY PRODUCTS
Pull It Off — 10601
Roller Cleaner & Conditioner
Designed to remove ink and debris off the rollers in the ink train.
The paste nature of the product holds the detergents closely onto the
roller surface allowing a great degree of the emulsification of the ink
to occur. Has an increased ability to penetrate and lift out dried ink
particles and pigments off the rollers.
Systems Cleaner Liquid — 10040
• Easy to apply • Thorough cleaning without harsh abrasives
• Complete color changes in a shorter time
12—2 Pound Cans/Case
Press Fountain Recirculating System Cleaner
Designed to clean and remove ink, paper coating, mold, and calcium
from the press recirculating system. This ensures consistent quality
and longer life of the fountain solution.
• Cleans entire recirculating system • No hot water needed
• Eliminates the need to dismantle in order to clean the system
• It does the work, not you! • Easy to use, takes about 45 minutes
4-Gallon/Case 5-Gallon
Systems Cleaner Powder — 10041
Relief — 10236
Remove calcium, paper coating, and surfactants from rollers & blankets
The calcium carbonate commonly used as a filler in today’s alkaline
paper lies at the heart of many print-related problems. If not removed
regularly, it forms a hard coating around the roller train causing a
loss of ink/water balance. This buildup of calcium carbonate on
the metering roller and blankets also negatively affects their performance. RELIEF will eliminate these problems when used as part of
an ongoing preventive maintenance program.
• Produces immediate results due to fast-acting concentrated formula
• Restores proper performance of rollers and blankets
• Maintains water receptivity in the dampening system
12-Quart/Case
Roller Lube — 10440
Roller Friction Compound
When a unit, or units, of a multi color press is being run in a nonprinting mode the ink rollers can generate substantial amounts of
heat through internal friction. If this situation is allowed to continue
or is repeated on a regular basis roller life will be shortened dramatically. Roller Lube is designed for this situation. It contains friction
reducing components to prevent the over-heating of the inking
rollers and conditioners to maintain the ink transfer surface.
Powder Fount Recirculation Systems Cleaner
Cleans and removes ink, paper coating, mold and calcium from the
press recirculation system. Helps to ensure longer life of the fountain
solution and to keep print quality consistent. Step One loosens debris
and emusifies ink residues. Step Two shocks and re-acidifies the
system, reducing the possibility of contamination of the fresh fount
with cleaning solution.
• No listed hazardous materials • Easy to use, takes 30-45 minutes
• Eliminates the need to dismantle in order to clean entire system
6-Quart Set/Case 2-Gallon Set/Case
Toner Scatter Remover— 10084
12-Quart/Case
Turbo Clean — 10009
Impression Cylinder & General Cleaner
Lifts and removes wet ink and paper coatings off of the impression
cylinder, reducing picking and other issues during longer runs. Even
cuts through older caked up ink and paper coating. Use it to clean up
the side frames of inks and coatings and as a general cleaner.
• Pleasant citrus odor • Can be used on molleton dampening sleeves
12-Quart/Case 6-Gallon/Case 5-Gallon 55-Gallon
• Extends roller life • Conditions rollers as it protects
• To remove simply wash off with general press wash
12-Quart/Case
Slip — 10036
12-Quart/Case
Smash — 10034 ◆ HAZMAT
Repair low spots on blankets
When a blanket has a low spot (smash) this creates an uneven printing (image transfer) surface which cause the print to come out too
light or not at all. The use of Smash will quickly swell the low spot,
correcting the problem.
• Easily applied
• Keeps low spot up for a long period of time
6—8 Ounce Bottles/Case
Snap Back — 10092
Permanent Blanket Repair
No listed hazardous materials. Use to repair a blanket smash without
marring the printing surface. When a blanket is smashed, the fabric
side is decompressed. If the rubber printing surface is not damaged it
can be almost permanently repaired in only a few minutes with Snap
Back which will only re-swell the fabric where it has been damaged.
• Like a liquid packing
• Revive older blankets • Non-HAZMAT
12—8 Ounce Bottles/Case
Coated Spray Powder — 10550
Allied’s Spray Powder Pouch was developed specifically for offset
printers. Smaller micron particles have been filtered out to further reduce airborn spray powder from floating onto delivery chains and
equipment. Moisture free, starch based powders are well suited for
use in a variety of print conditions including environments with extremely high temperatures that lack climate controls.
• Moisture resistant packaging • Contolable flow rate
• Uniform 25 micron grain shape
◆ HAZ Indicates item is subject to Hazardous Material Surcharge
ALLIED Pressroom Products
FOUNTAIN SOLUTION FILTERS
Bag Filter Large
WATER PURIFYING AND PROCESSOR FILTERS
25" x 12"
10480LBF
Bag Filter Large Bottle Style
14" x 13"
7-3/4" x 12-1/2"
3" Diameter
20" x 27"
9" x 4-1/2"
1/2" Barb
1/2" Barb
1" Barb
7-1/4" x 10-1/8"
7-3/4" x 6-1/2"
7-3/4" x 7"
Sediment Pre-Filter 5 Micron
20" x 2-1/2"
Spiral Wound Filter 20 Micron
9-3/4" x 2-1/2"
Spiral Wound Filter 50 Micron
9-3/4" x 2-1/2"
Spiral Wound Filter 75 Micron
9-3/4" x 2-1/2"
Spiral Wound Filter 20 Micron
20" x 2-1/2"
Spiral Wound Filter 50 Micron
20" x 2-1/2"
3RMSW502
27" x 7"
10480TB
Techno Tray Filter
9-3/4" x 2-1/2"
3RMSW252
10480TSB
Techno Boot Filter
Sediment Pre-Filter 5 Micron
3RMSW75
10480A
Techno Small Bag
9-3/4" x 2-3/4"
3RMSW50
10480I
SS3 Filter Bag
RO Post Treatment
3RMSW25
30300XLMT
Royse Foam Filter
20" x 2-1/2"
3RMROFSB
3030LMT
Muck Trapper Extra Large
G A C Pre-Filter
3RMROFSA
30300MT
Muck Trapper Large
9-3/4" x 2-1/2"
3RMROPTC
10476I
Muck Trapper Regular
G A C Pre-Filter
3RMROFGB
10480FSF
Ink Absorber
20" x 2-1/2"
3RMROFGA
10480K
Felt Sheet Filter
Carbon Block Pre-Filter
3RMOFCAB
30480J
Diffuser Disk
9-3/4" x 2-1/2"
3RMOFCA
10480BSB
Baldwin Tray
Carbon Block Pre-Filter
Spiral Wound Filter 75Micron
20" x 2-1/2"
3RMSW752
10" x 18-1/2"
10480C
Techno Bag
9-3/4" x 8"
10480BT
Traight Filter Bag
7" x 12"
10480J
CORRECTION PENS
Image Adder - Medium
10069ABI
Metal Imageater - Chisel Tip
10069BI
Inks Kinives — 30005
Poly Imageater - Medium
10069PBI
Strong one piece solvent resistant knives are made from durable
polypropylene. Light weight with rounded edges so as to present
no danger of damaging rubber, plastic or teflon parts on the press.
Silver Imageater - Fine
10069SFI
Silver Imageater - Medium
10069SBI
CTP Deletion Pen - Medium
10069CBI
Film Opaque Pen - Fine
10069OFI
Set of 4 Knives
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising