PHOENIXM2 User Manual

Add to my manuals
38 Pages

advertisement

PHOENIXM2 User Manual | Manualzz

PHOENIXM2

User Manual

1

IMPORTANT! PLEASE READ

DO NOT RETURN THIS PRODUCT TO THE STORE

Please contact a DEFENDER

®

customer support representative first regarding any additional information on product features, specifications or assistance with setup. Please contact us via one of the methods below:

Contact us form: www.defender-usa.com/contact

Online web chat: www.defender-usa.com

WARRANTY INFORMATION

We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have a warranty or support issue, please contact us at www.defender-usa.com/contact

DEFENDER

®

Canada: 4080 Montrose Road Niagara Falls, Ontario, Canada L2H 1J9

DEFENDER

®

USA: 840 Aero Drive, Cheektowaga NY 14225

For more information about your product’s warranty, please visit our website at

www.defender-usa.com.

WARRANTY TERMS

1. DEFENDER

®

products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at DEFENDER

®

’s discretion.

2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual.

3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty.

4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. DEFENDER

®

assumes no responsibilities for any other claims not specifically mentioned in this warranty.

5. This warranty does not cover shipping costs, insurance, or any other incidental charges.

6. You MUST contact DEFENDER

®

before sending any product back for repair. You will be issued a Return

Authorization number with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #).

7. This warranty is valid only in Canada and the continental U.S.

8. This warranty cannot be re-issued.

ATTENTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

2

IMPORTANT! PLEASE READ

THANK YOU

You’ve made a fine choice to protect what you value most.

FCC

This Device Compiles with part 15 of the FCC Rules

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

FCC note: the manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to the equipment. Such modification could void the user’s authority to operate the equipment.

IC note: low power device rf

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CLASS B OR A PRODUCTION: This class (B) digital apparatus complies with Canadian ICES-003.

DISCLAIMER

DEFENDER

®

does not endorse any of DEFENDER

®

products for any illegal activities. DEFENDER

®

is not responsible or liable in any way shape or form for any damage, vandalism, theft or any other action that may occur while a DEFENDER

®

product is in use by the consumer. This is version 1.0 for this product, you may find updated versions by visiting our website product page.

3

TABLE OF CONTENTS

IMPORTANT! PLEASE READ

DO NOT RETURN THIS PRODUCT TO THE STORE ........................................................................................................................................2

WARRANTY INFORMATION .......................................................................................................................................................................2

WARRANTY TERMS ....................................................................................................................................................................................2

THANK YOU ...............................................................................................................................................................................................3

FCC ..........................................................................................................................................................................................................3

DISCLAIMER ..............................................................................................................................................................................................3

ABOUT YOUR PRODUCT

FEATURES ..................................................................................................................................................................................................5

WHAT’S INCLUDED ...................................................................................................................................................................................5

BUTTONS AND CONNECTIONS .................................................................................................................................................................6

MONITOR ..........................................................................................................................................................................................6

CAMERA ...........................................................................................................................................................................................7

INSTRUCTION

THINGS TO KNOW BEFORE YOU BEGIN! ....................................................................................................................................................8

INITIAL SET UP ...........................................................................................................................................................................................8

MONITOR ..........................................................................................................................................................................................8

CAMERA(S).......................................................................................................................................................................................8

INSTALLING CAMERAS ..............................................................................................................................................................................9

RECORD .................................................................................................................................................................................................10

SETTING DURATION FOR MOTION RECORD ....................................................................................................................................10

ACCESSING THE RECORD SCHEDULE .............................................................................................................................................11

UNDERSTANDING THE SCHEDULE SCREEN ......................................................................................................................................12

SETTING UP SCHEDULE RECORD .....................................................................................................................................................13

SETTING EACH CAMERA(S) FOR SCHEDULE RECORDING ..............................................................................................................14

SETTING SENSITIVITY FOR MOTION DETECTION ..............................................................................................................................15

SETTING MOTION RECORD .............................................................................................................................................................15

SETTING FILE OVERWRITE ................................................................................................................................................................16

CAMERA OPTIONS .................................................................................................................................................................................17

PAIRING CAMERAS .........................................................................................................................................................................17

TURNING CAMERAS ON/OFF .........................................................................................................................................................19

ADJUSTING CAMERA BRIGHTNESS .................................................................................................................................................20

CHANGING THE CAMERA RESOLUTION ..........................................................................................................................................22

MONITOR SETTINGS ................................................................................................................................................................................24

SETTING THE DATE AND TIME ...........................................................................................................................................................24

RETURNING TO DEFAULT SETTINGS ..................................................................................................................................................25

FORMATTING MEMORY ...................................................................................................................................................................27

CHANGING THE TIME ZONE ............................................................................................................................................................28

DAYLIGHT SAVINGS .........................................................................................................................................................................29

FIRMWARE UPDATE ..........................................................................................................................................................................31

SETTING ALERT ................................................................................................................................................................................33

PLAYBACK RECORDED FILES ...........................................................................................................................................................34

DELETING INDIVIDUAL RECORDED FILES .........................................................................................................................................35

TROUBLESHOOTING

NO PICTURE/SIGNAL .............................................................................................................................................................................36

NO AUDIO ..............................................................................................................................................................................................36

DEVICES ARE NOT PAIRING ....................................................................................................................................................................36

NIGHT VISION NOT WORKING ................................................................................................................................................................36

MONITOR IS READING NO SIGNAL ........................................................................................................................................................36

FOOTAGE NOT RECORDING ...................................................................................................................................................................36

SPECIFICATIONS

MONITOR ................................................................................................................................................................................................37

CAMERA .................................................................................................................................................................................................37

ABOUT YOUR PRODUCT

FEATURES

Digital Wireless Technology: Superior digital frequency with a wireless range up to 150 feet

(optimal range) that ensures clear video and audio.

The convenience of a digital wireless signal also allows you to set your system up in just a matter of minutes.

SD Card Recording: Record up to 700 minutes of video and audio directly onto the included 8GB SD card. Choose to record constantly, based on a set schedule or only when motion is detected.

Long Range Night Vision: Sixteen infrared (IR) LEDs let you see in the dark, up to 32ft away!

1

The LEDs automatically activate when it gets dark, giving you around the clock protection.

Weather Resistant Camera: The camera is built with durable aluminum, weather resistant housing

2 so you can use it outdoors in almost any weather condition. You can use it indoors for monitoring your business, inventory or home.

Expandable up to 4 Cameras: This system can support up to four cameras so you can monitor multiple offices, entrances and outdoor areas at the same time.

Motion Detection Settings: Motion detection gives you the option to record only when movement is detected to conserve your SD card memory. Your system will start recording and alert you when motion is detected. This system offers both a PIR

Sensor recording and pixel change detection.

IR Cut Filter: The IR Cut filter will block light sources that could be misinterpreted as infrared (such as

UV light) resulting in more realistic color and clearer image during the day.

24 Hour Scheduled Recording: Personalize a 24 hour recording schedule. Record video footage using three different types of recording modes: manual, scheduled, and motion activated.

7" LCD Monitor: View your live or recorded footage easily on the 7" LCD monitor. Its functional design allows it to be wall mounted or placed on a table.

Lifetime Customer Support: Our customer support team can be reached on our website at www.defender-usa.com/contact. Our experts will be happy to assist you in English, French and Spanish.

WHAT’S INCLUDED

1. Monitor

2. Camera(s)

3. Power cord(s)

4. Mounting hardware

5. Pairing Tool

6. Antennas for the camera

7. SD card

3

Disclaimer

1. IR illumination range up to 32ft under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application.

2. Not for use in direct exposure to water, rain or snow. Although the cameras are water resistant they are not waterproof.

3. This unit can support an SD card up to 128GB. Please note when ‘expanding’ up to 128GB SD card the SD will need to be re-formatted.

5

ABOUT YOUR PRODUCT

BUTTONS AND CONNECTIONS

Monitor

16

18

19

DC IN 5V

17

1. Motion Record: Prompts the monitor to record only when motion is detected. To stop motion recording, press this button again.

2. Rec: Manual Record will prompt the monitor to begin constant recording. To stop recording, press this button again.

3. Power: Pressing this button turns the monitor on and off.

4.

Volume: This adjusts the volume of the audio that plays through your monitor.

5.

Signal strength:

Tells you how good the reception is from the camera to the monitor.

6.

Camera:

Tells you which camera is being shown in live viewing mode.

7.

File:

If the file symbol is visible it means you have recorded footage stored.

8. Date: Displays current date and time.

9.

Cam: Changes from one camera to another.

10.

View: Allows you to change the cameras viewing from single, split screen or quad view.

11.

Sleep: When pressed allows the monitor screen to turn off until motion is detected in front of the camera(s). Once motion is detected in front of the camera the monitor will turn back on.

20

12. Zoom: While in live view mode, pressing zoom will allow 1X zoom on the picture. Pressing zoom again will zoom back out.

13. Delete: During playback this button allows you to delete single clips of recorded footage.

14. Menu/Exit: Enters and exits the Main Menu.

15. Joystick: Allows movement to navigate through the menu. Pressing the joystick in will allow you to select the menu option. In Live view press the joy stick in to enter the Recording File List Menu.

16. Antenna: This antenna allows for a stronger signal between the camera and monitor.

17.

Speaker:

Allows you to hear sound from your camera.

18.

SD Card Insert: The SD card will be inserted into this area to record and save footage.

19.

Talk: Allows for two-way communication, pressing this button allows you to speak through the monitor to the camera.

20.

Power Input: Plug the small end of the included power adapter marked monitor into this area, and the other end to a power outlet.

6

ABOUT YOUR PRODUCT

Camera

1

3 4

2

PAIR

8 9

7

10

5 6

1. Antenna: This removable antenna allows for a better signal between the camera and monitor.

2.

Camera Housing: Made of anodized aluminum to prevent rust.

3.

Camera Lens: The camera lens is located in the center of the LEDs.

4. Infrared (IR): The 16 LEDs allow the camera to see in the dark up to 32ft away.

5.

Speaker/Microphone: Allows you to hear and record sounds, and talk back to whomever you are recording.

6.

Motion Detection Sensor: Detects any motion in front of the camera.

7.

CDS Sensor: Automatically turns on the infrared

LEDs when it gets dark.

8. Pair Button: Located at the back of the camera.

Press this button when pairing the camera and monitor. For more information, please see Pairing on page 18.

9.

Power Connection: This 3 ft. cord connects to the power adapter (marked Camera).

10.

Camera Mount: Allows the camera to be wall mounted or placed on a table.

NOTE:

This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between day mode and night vision mode, an audible clicking noise may be heard coming from the camera. This clicking is normal, and indicates that the camera filter is working

7

INSTRUCTION

THINGS TO KNOW BEFORE YOU BEGIN!

1. The camera should be installed between 8 to 13ft above the area to be monitored.

2. For best results install the camera NO MORE than 100ft away from the monitor’s position to maintain a strong signal between the camera and monitor.

3. Before mounting the camera, ensure there are no obstructions in the camera’s view.

4. Place the camera in the most strategic place where it can provide the most detailed video of your home or business. Having the camera in the open for people to see can help deter criminals.

5. To cover large, dark areas such as backyards, garages, and driveways, place camera in a strategic location, such as on the roof or deck. This way, more area is covered by the camera.

6. Ensure that the camera is positioned to avoid glare. Be sure to position camera away from direct sunlight or indoor lighting.

7. For best results, light in front of the camera should be around the same brightness as the light around the area or object being monitored.

8. Decide whether the camera will be wall-mounted, or mounted on a desk/table top. We recommend that the mount is secured using the included screws and hardware for all installations.

INITIAL SET UP

Monitor Camera(s)

Cam View Sleep Zoom Delete Menu

OK

• Plug in the power cord labeled for the monitor into the DC port on back of the monitor

• Plug the other side of the power cord into a power outlet

• Press and hold the power button on the top right of the monitor to turn the unit on.

• Plug the cord labeled for Camera into the camera

• Plug the other side of the power cord into a power outlet

• Attach the antenna

• Pair cameras if not paired upon powering the camera

8

INSTRUCTION

INSTALLING CAMERAS

1. Decide if the camera will be wall-mounted or sitting on a desk/tabletop. The camera can be adjusted for many mounting scenarios by rotating it to the required position.

• Keep in mind that the camera is microphone equipped. If you would like to record audio, make sure the camera is within a close enough range to record sound (within 6 ft).

• For best results be sure to mount the camera no further than 100ft away from your monitor.

• Be sure to mount the camera no further than 8ft away from a power source.

2. Screw the mounting bracket into the camera’s mounting hole, turning it clockwise.

3. Ensure that the camera is strongly secured into the wall.

4. Adjust the camera to the desired viewing angle.

5. For additional help with mounting the camera, please see the drilling template located at the back of the manual.

6. Once you have mounted the camera and placed it at the desired viewing angle, plug the camera’s power adapter (marked for camera) into the cord on the camera and then plug the adapter into a power source (a surge protected power source is recommended).

7. If you purchased a kit with additional cameras, repeat the above steps for all additional cameras.

9

INSTRUCTION

RECORD

Setting Duration for Motion Record

Allows you to set the length of time the unit will record once motion is no longer being detected.

1. Press the Menu button 2. Select Record

3. Select Duration 4. Select the desired time for post-motion recording

10

Accessing the Record Schedule

1. Press the Menu button 2. Select Record

INSTRUCTION

3. Select Schedule Recording

4. This screen will be shown

11

INSTRUCTION

Understanding the Schedule Screen

1

2

3

4

5

1.

Day of the week: Use the LEFT or RIGHT navigation arrow keys on the joystick to change the day at the top. Corresponding record schedule for that day will appear below.

2.

Time: The record schedule uses a 24 hour clock.

3.

Camera: Each camera can have a different record schedule.

4.

Record schedule:

• Grey - No recording has been set for that time

• Yellow - Motion Record has been set for that time

• Blue - Continuous record has been set for that time.

5.

Modify: Allows you to change the Record Schedule.

12

Setting up Schedule Record

1. Press the Menu button 2. Select Record

INSTRUCTION

3. Select Schedule Recording 4. Press OK when Modify is highlighted

13

SETTING EACH CAMERA(S) FOR SCHEDULE RECORDING

INSTRUCTION

1

2

3

4

5

1. Camera: To select the camera you would like to set up a Record Schedule for, use RIGHT or LEFT navigation arrows to move the Green box over the desired camera(s). Select OK to select each camera you wish to set a Record Schedule for. When selected, the box will turn Blue.

2.

Setting the Time: Use the navigation arrows until the Green box is around the time you would like to change. Use UP or DOWN navigation arrows to change the time. When complete use the RIGHT navigation arrows to move to the next time box.

3.

Days of the Week: To select the days of the week you would like to set the Record Schedule for, use the navigation arrows to move the Green box over desired day(s). Press OK to select each desired day.

4.

Save: Will save the schedule you have set up.

5.

Delete: Will delete the current schedule.

NOTE:

All that are highlighted will have the same schedule.

14

2

3 4

7

8

PAIR

9

10

5 6

1

2

3

4

5

INSTRUCTION

Setting Motion Record

To enable Motion Recording, select the Motion button on the top of the screen. You will now see a Red moving man icon . The camera will now start recording when motion is detected. To enable Motion on all cameras, select the camera button to toggle the camera(s) and press the motion button on each.

NOTE:

If Scheduled Recording is set up and motion is enabled, the unit will record based on the Scheduled Recording by default.

Setting Sensitivity for Motion Detection

1. Press the Menu button 2. Select Detect

3. Select the camera(s) you would like to set the sensitivity level for. Using the UP or DOWN navigation arrows, highlight the camera you would like to adjust

4. Select the desired sensitivity level

15

INSTRUCTION

NOTE:

The higher the sensitivity level the more motion will be detected. The lower the sensitivity, the less activity the monitor will pick up

5. Select OK and you will return to the Video

Motion Detect page

Setting File Overwrite

This gives the monitor permission to start overwriting previously recorded files when the memory card is full.

1. Press the Menu button 2. Select Record

16

INSTRUCTION

3. Select File Overwrite

4. Select Yes to confirm the overwrite or No, to return to the Record Menu

NOTE:

If File Overwrite is not enabeled and the SD card becomes full, recording will stop.

CAMERA OPTIONS

Pairing Cameras

Connecting the camera and monitor will allow the camera live feed screen and recorded to the SD card. If you have purchased an additional camera it is highly recommended to follow the pairing process.

*If camera does not come paired or if you would like to add additional cameras, complete the following steps:

1. Press the Menu button

2. Select Camera

17

INSTRUCTION

3. Select Pairing

4. Select which camera you would like to pair and the pair screen will appear with a 20 second count down cam 1

PAIR

5. Using the thin white pairing tool, push the pairing button on the back of camera before time runs out

07 / 01 / 2015 11 : 45 : 08

6. When pairing is successful the video will return to the screen

18

Turning Cameras On/Off

1. Press the Menu button 2. Select Camera

INSTRUCTION

3. Highlight which camera you would like to turn

On or Off

4. When the desired camera is highlighted Blue:

Press the LEFT navigation arrow to turn Off or the

RIGHT navigation arrow to turn On

19

INSTRUCTION

5. Select OK to confirm the selection

Adjusting Camera Brightness

6. You will see a Please Wait message. When complete you will return to the Camera

Setup page

1. Press the Menu button

2. Select Camera

20

INSTRUCTION

3. Select Brightness 4. Using the LEFT or RIGHT navigation arrows, highlight the camera you would like to adjust and change the Brightness

5. When the desired camera is highlighted in Blue press the RIGHT or LEFT navigation arrows until you reach the desired brightness level

(1 low - 6 High)

6. Press OK to save the settings and you will return to the Camera Settings page

21

INSTRUCTION

Changing the Camera Resolution

The resolution can vary depending on the number of cameras paired with the unit. Please see the chart after the steps to understand the frames per second ratio and the changes to the frames per second when connecting more than one camera.

1. Press the Menu button 2. Select Record

3. Select Resolution 4. Highlight which camera you would like to change resolution for by using UP or DOWN navigation arrows

22

INSTRUCTION

5. When the desired camera is highlighted in

Blue, use the LEFT or RIGHT navigation arrows to change the Resolution

6. Press OK to save the settings and you will return to the Camera Setup Page

Frames per second ratio:

Number of

Cameras

1 Camera

2 Camera

3 Camera

4 Camera

QVGA

N/A

30 fps

30 fps

30 fps

VGA

30 fps

15 fps

7.5 fps

7.5 fps

QVGA (Quarter Video Graphics Array) is a smallscreen display mode in which the resolution is 320 pixels horizontally by 240 pixels vertically (320 X 240)

VGA (Video Graphics Array) is a high resolution standard for displaying text, graphics, and colours that has a resolution of 640 X 480 pixels.

23

MONITOR SETTINGS

Setting the Date and Time

1. Press the Menu button 2. Select Settings

INSTRUCTION

3. Select Date and Time 4. Use the LEFT or RIGHT navigation arrows to highlight the box you would like to change

(Example: Month, Day,Year, Hour, Minute, Second)

24

INSTRUCTION

5. When highlighted, use the UP or DOWN navigation arrows to make changes

Returning to Default Settings

6. Press OK to save the setting and you will return to the Settings page

1. Press the Menu button 2. Select Settings

25

INSTRUCTION

3. Select Default Settings, press OK 4. Select Yes if you wish to set Default Settings or No to return to the Settings page

NOTE:

This will change the monitor back to the default settings. It will not delete footage from the SD card

5. If Yes is selected you will see a "Restore Default

Settings" message. Select Yes to confirm. Once complete you will return to the Settings page

26

Formatting Memory

1. Press the Menu button 2. Select Settings

INSTRUCTION

3. Select Format Memory 4. Selecting No will return to the Settings page

27

5. If you Select Yes, "Formatting Please Wait" will appear. The screen will return to the Settings page

Changing the Time Zone

INSTRUCTION

NOTE:

Formatting the memory will delete the recorded footage from the SD Card, it will not change the settings

1. Press the Menu button 2. Select Settings

28

INSTRUCTION

3. Select Time Zone

Daylight Savings

4. Use UP or DOWN navigation arrows to choose the desired Time Zone. Select the correct Time

Zone and you will return to the Settings page

1. Press the Menu button 2. Select Settings

29

INSTRUCTION

3. Select Time Zone 4. Use the RIGHT navigation arrow to highlight the Box next to Automatically adjust Clock for

Daylight Savings Time

5. Use the UP navigation arrow until the Check mark appears. This will allow Daylight Savings

Time to occur at the appropriate time. Leave the box blank if you do not wish for the time to change when Daylight Savings Time occurs

6. Press OK to save the settings and you will return to the Settings page

NOTE:

Time zone will automatically change time when daylight savings occurs in your time zone

30

INSTRUCTION

Firmware Update

1. Insert the SD card into the included adapter 2. Insert the adapter into the SD card reader (not included) on your PC or Mac

NOTE:

A firmware Update should only be applied if available and recommended by a Defender representative.

Cam View Sleep Zoom Delete Menu

4

1

OK

2

3

3. Download the latest firmware and transfer it to the Root Folder on the SD card

4. Once the transfer is completed, insert the SD card into the card slot on the monitor

31

5. Press the Menu button 6. Select Settings

INSTRUCTION

7. Select Firmware Upgrade 8. Confirm Firmware Upgrade

32

INSTRUCTION

CAUTION:

During the firmware update do not remove the power supply

9. Select SD Card, and Yes to confirm. The system will take a few minutes to install the latest firmware. After upgrading the new Firmware, the monitor will automatically reboot

Setting Alert

An alarm will sound from the unit to alert you when motion has been detected. This also controls the beeps from the monitor when pressing buttons

1. Press the Menu button 2. Select Alert

33

INSTRUCTION

3. Use the LEFT or RIGHT navigation arrows to set

Alarm Volume

4. Press OK to save the setting and return to the

Main Menu page

Playback Recorded Files

1. When in Live Viewing Mode, select the OK button.

The Recording File List (below) will appear

2. Once you have selected the date from which you would like to view files, a list of files will appear a b c a. Date: You can change the date by using the UP or DOWN navigation arrows. Select OK when the desired date has been found.

b. Calendar: The areas that appear highlighted in

Blue have recorded footage. Use the navigation arrows until a green box is over desired date select OK.

c.

Camera: You can select to search footage for all cameras or for a specific one by using the RIGHT or LEFT navigation arrows to move Green box over the desired cameras(s) and select OK.

34

5

6

7

8

1 2 cam 1 2X

6X

8X

16X

2X

6X

8X

16X

3 4

07 / 01 / 2015

Cam Quad Sleep Zoom

11 : 45 : 08

Delete Menu

4

1

OK

3

2

9 10 11 12 13 14 15

5

6

7

8

1 2 3 4 cam 1

07 / 01 / 2015

2X

6X

8X

16X

2X

6X

8X

16X

INSTRUCTION

11 : 45 : 08

When watching videos you have the following options:

Cam View Sleep Zoom Delete Menu

OK

3. Use the UP and DOWN navigational arrows until the Red box is around the desired file, then a. UP arrow/1: Pause b. RIGHT arrow/2: Stop c.

DOWN arrow/3: Fast Forward d.

LEFT arrow/4: Rewind

13 e. Menu button/5: Exit back to file list

Deleting Individual Recorded Files

1. When in the Recording File List screen, use the navigation arrows to move the Red box around the file you would like to delete

2. Press the Delete button

3. Select Yes if you wish to delete and No to cancel

35

5

Menu

4

4

1

1

OK

3

3

2

2

TROUBLESHOOTING

No Picture/Signal

• Make sure all the connections are secure and properly connected.

Found on page 8

• Make sure your monitor is plugged into a power source from the 5V DC input on the back.

Found on page 8

• Make sure there is nothing obstructing the view of the camera.

• Try re-pairing the camera and monitor.

Found on page 17

• The area may be too bright or dark, try moving the unit.

• The night vision comes on automatically when the light levels drop; try the camera in a pitch black setting. The area that the camera is in may get too much light to activate the sensor.

• Try adjusting the brightness settings on your monitor.

Found on page 20

• Ensure sleep mode is not enabled.

No Audio

• Make sure nothing is interfering with the microphone on the camera.

• Make sure what you are trying to hear is close enough to the microphone on the camera (within 6ft).

• Disconnect and reconnect the wires from the camera and the monitor to make sure they are secure.

• Try re-pairing the camera and monitor.

Found on page 17

• Try adjusting the volume on the monitor.

Found on page 6

Devices Are Not Pairing

• Ensure that the camera and monitor are within 100ft of each other.

• Try moving the devices closer together, sometimes walls/other obstructions can get in the way of the camera and monitor’s signal. Ensure that both devices are connected to a proper power source.

Night Vision Not Working

• The night vision comes on automatically when the light levels drop; try the camera in a pitch black setting. The area that the camera is in may getting too much light to activate the sensor.

Monitor is Reading No Signal

• Try re-pairing the camera and monitor.

Found on page 17

• Make sure there is nothing obstructing the view of the camera.

• Make sure the camera and monitor are within 100ft from one another.

Footage Not Recording

• Adjust the recording settings

• Make sure the SD card is completely in the monitor.

• Make sure the SD card is not full and that overwrite function is turned on.

• Try resetting the factory defaults.

Found on page 25

• Try formatting the SD card.

Found on page 27

36

SPECIFICATIONS

Monitor

Monitor Type

Screen Size

Wireless Frequency

Channel Frequencies

LCD Monitor

7" monitor

2400Mhz~2483.5Mhz

4Mhz channel separation

Number of Cameras

Supported

4

Output Terminal

Resolution

Speaker

Maximum SD Card Size

Compression

File Type

Operation Mode

Scheduled Recording

N/A

800 RGB (H) x 480 (V)

Yes

128GB

MPEG-4

ASF

FHSS hopping

Yes

Automatic Overwrite when

Full

Motion Activated Alert

Post Motion Recording

On/Off selected.

Yes

Yes

Audio Activated Recording No

Digital Zoom Yes (x2)

Auto-Scanning

Auto sequence channel, the transition interval is 6 seconds

Button Lock

Remote Control

N/A

No

New Video Footage Notifier Yes

Viewing Modes

Single view, 2-CH view,

Quad view

Recording Mode

Manual recording,

Motion recording,

Schedule recording

Battery Operable

Adjustable Brightness

Video Output

Operating Temperature

Operating Humidity

Housing Material

Housing Color

Monitor Power Input

Power Adapter Input

Dimensions

Weight

No

Yes

No

14°F-104°F (-10°C-40°C)

0% ~ 85%

No black

DC 5V 2A

AC 100~240V 50/60Hz

180*142*70mm

 444g

Camera

Image sensor

IP Rating

Maximum Wireless

Range (Line of Sight)

Optimum Wireless Range

(Line of Sight)

1/4" Color CMOS Image

Sensor

IP54

450 ft

150 ft

Wireless Frequency

Wireless Channel

Frequencies

Resolution

Night Vision

Number of IR LEDs and

Range

IR LED control

IR Cut Filter

Min. Illumination

Battery Operable

Viewing Angle

2400Mhz~2483.5Mhz

Hopping Frequencies

640 x 480

Yes

16 LEDS 32Ft

Auto

Included

0 Lux (when IR LEDs on)

No

64° (Field Of View)

Focal Length

Focus Type

3.6mm

Fixed Focus

Optimal Focal Distance N/A

Microphone Yes

Motion Detection

Housing Material

Yes

Aluminum & ABS

Housing Color Black

Electronic shutter speed 1/60s~1/100,000s

Signal/Noise Ratio

Power LED Indicator

50dB

No

Camera Bracket Yes

Operating Temperature 14°F - 04°F (-10°C - 40°C)

Operating Humidity

Mounting Hardware

0% ~ 85%

Included

Camera Power Input

Power Adapter Input

Dimensions

Weight

9V DC 600mA

100-240V ~ 50/60Hz

140*55*57mm

284g

37

DEFENDER-USA.COM

38

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals