test and inspection equipment
TEST AND INSPECTION EQUIPMENT
OTDRs | Microscopes | Test Sets | Power Meters
Founded in 1984, AFL is a global leader providing fiber optic
products, equipment, and engineering services to the
telecommunications, electric utility, wireless, energy, private
network and OEM markets. AFL also serves a diverse mix
of industry segments that include service providers,
military and defense, mining, oil and gas, and biomedical.
AFL brings years of experience in developing solutions for
customers, fostering a creative culture to drive and deploy
innovative technologies that will improve communications for
years to come. Our product line consists of fiber optic cable,
optical connectivity, fusion splicers and test equipment as well
as fiber management systems, closures and accessories.
AFL is dedicated to bringing our customers a quality
product as well as delivering superior value.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
Table of Contents
Optical Time Domain Reflectometers (OTDRs)
and Fault Locators
OFL280-10x FlexTester Multifunction OTDR and Loss Test Set. . . . 3
M210 Hand-held OTDR
. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
M700 Compact Single-mode OTDR
. . . . . . . . . . . . . . . . . 13
. . . . . . 18
C850 Compact QUAD OTDR w/ QUAD OLS & OPM
OFL250-50 Hand-held, Fault-Locating OTDR . . . . . . . . . . . . . . . 22
OTDR Fiber Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MLP4-2 Multimode Test Kit with Wave ID and Set Reference . . .
MLP1 Basic Multimode Test Kit . . . . . . . . . . . . . . . . . . . . . . . . .
CKSM-2 Contractor Series Multimode and Single-mode Test Kit
with Set Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CKM-2 Contractor Series Multimode Test Kit w/ Set Reference . . .
Optical Fiber Identifiers
OFI-FTTx Active ONT Detector . . . . . . . . . . . . . . . . . . . . . . . . . . 95
OFI-400 Optical Fiber Identifier . . . . . . . . . . . . . . . . . . . . . . . . . 97
OFI-200 Optical Fiber Identifier . . . . . . . . . . . . . . . . . . . . . . . . 100
. . . . . . . . . . . 28
Certification, Optical Loss and Return Loss Test Sets
C880 QUAD Certification Test Kit
. . . . . . . . . . . . . . . . . . . 32
OLTS 5 - Optical Loss Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Optical Power Meters
OPM4-FTTx PON Power Meter. . . . . . . . . . . . . . . . . . . . . . . . . .
OPM4 OPM with Wave ID and Set Reference. . . . . . . . . . . . . . .
OPM5 OPM with Wave ID Set Reference, and Data Storage . . . .
OPM1 Optical Power Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . .
CSM1 Contractor Series Optical Power Meter. . . . . . . . . . . . . . .
37
39
41
45
46
LED and Laser Light Sources
OLS7- FTTH and OLS7-3 Triple Wavelength Laser Sources. . . . . .
OLS4 Integrated Laser and LED Light Source with Wave ID. . . . .
OLS2-Dual Laser Light Source with Wave ID. . . . . . . . . . . . . . . .
OLS1-Dual LED Laser Light Source with Wave ID . . . . . . . . . . . .
OLS1 LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CSS1-MM Contractor Series Dual LED Light Source . . . . . . . . . .
CSS1-SM Contractor Series Dual Laser Light Source. . . . . . . . . .
48
50
52
54
56
58
60
Optical Loss Test Kits
SMLP5-5 SM/MM Test Kit with Wave ID,
Set Reference and Data Storage. . . . . . . . . . . . . . . . . . . . . . .
SMLP4-4 SM/MM Test Kit with Wave ID and Set Reference . . . .
SLP5-FTTH and SLP5-7 Triple Wave Test Kit with Wave ID,
Set Reference and Data Storage. . . . . . . . . . . . . . . . . . . . . . .
SLP5-6D Single-mode Test Kit with Wave ID,
Set Reference and Data Storage. . . . . . . . . . . . . . . . . . . . . . .
SLP4-FTTH and SLP4-7 Triple Wave Test Kit
with Wave ID and Set Reference. . . . . . . . . . . . . . . . . . . . . . .
SLP4-6D Single-mode Test Kit with Wave ID and Set Reference. .
MLP5-2 Multimode Test Kit with Wave ID,
Set Reference and Data Storage. . . . . . . . . . . . . . . . . . . . . . .
88
90
Visual Fault Identifiers
VFI2 Visual Fault Identifier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
HiLite Visual Fault Identifier. . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
MT Tracer Muti-fiber Visual Fault Identifier. . . . . . . . . . . . . . . . . 94
Fiber Test Kits
FTK Pro Installer Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
OTDR and Certification Test Kits
C860 QUAD OTDR and Certification Test Kit
84
86
Microscopes and Videoscopes
DFS1 Digital FiberScope
. . . . . . . . . . . . . . . . . . . . . . . . .
AFL SimpleView™ Fiber Inspection Software
. . . . . . . . . .
OFS 300 Optical Microscope (for connectors on patch cords) . .
VS 300 Video Microscope (for connectors on patch cords) . . . .
VFS 2 Video Fiber Scope (for connectors in panels). . . . . . . . . .
102
106
107
108
109
Attenuators and Network Activation Kits
VOA6-SM Variable Fiber Optic Attenuator . . . . . . . . . . . . . . . .
VOA5-MM Variable Fiber Optic Attenuator. . . . . . . . . . . . . . . .
SVA1 Single-mode Variable Attenuator . . . . . . . . . . . . . . . . . .
Broadband Activation Kits
. . . . . . . . . . . . . . . . . . . . . . .
Telecom Activation Kits
. . . . . . . . . . . . . . . . . . . . . . . . .
110
112
113
114
116
Network Simulators
NS Bench Top Network Simulators. . . . . . . . . . . . . . . . . . . . . . 118
NSR Network Simulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
FTS Series Fiber Optic Talk Sets . . . . . . . . . . . . . . . . . . . . . . . . 119
Calibration Plans
Prepaid Calibration Plans
62
66
. . . . . . . . . . . . . . . . . . . . . . . 121
68
72
AFL’s NOYES Test and Inspection Equipment product line offers a
comprehensive set of fiber optic test equipment for measuring,
maintaining and documenting the performance of fiber optic
networks. In every area of manufacturing, AFL combines the
latest equipment, production techniques and test systems to
create products with world-class performance.
76
78
80
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
1
1Q12
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
2
OFL280-10x FlexTester Family
Multifunction OTDR and Loss Test Set
The NOYES OFL280 FlexTester family offers an unmatched
combination of fiber optic test functions, ease-of-use, portability
and value. All OFL280 FlexTester models include an integrated
single-mode 1310/1550 nm OTDR with PON-optimized and
standard test modes, optical power meter, 1310/1550 nm laser
source and visual fault locator.
For many users the two-wavelength OFL280-100 will provide
the best balance of functionality and value. Testing at 1310 and
1550 nm is normally sufficient to certify point-to-point or FTTx
PON fibers and allows the detection of macro bends. The threewavelength OFL280-101 and OFL280-102 models add 1625 nm
or 1490 nm respectively. Testing at 1625 nm allows testing of
the L band. Testing at 1490 nm is required by some network
operators to certify FTTx PONs. The filtered, three-wavelength
OFL280-103 can certify dark fibers at 1310/1550 nm, faultlocate live FTTx PON fibers at 1625 nm, and measure FTTx power
levels at 1490 and 1550 nm, all from a single test port.
The OFL280 FlexTester user interface provides operating modes
suitable for a wide range of users and features a top-down menu
structure that is both easy to learn and a pleasure to use.
Applications
•• PON OTDR - FTTx PON construction certification
•• Live Fiber OTDR - FTTx service turn-up and troubleshooting
•• Full Auto OTDR - Normal (point-to point) fiber cable
construction testing and fault location
•• Expert OTDR - Full function OTDR for experienced users
•• Real-Time OTDR - Fault location, splice verification,
first connector checker
•• End Locator - Quickly locate breaks or measure fiber length
•• Optical Power Meter - Measure optical power or fiber loss
•• Laser Source - Measure end-to-end loss or trace fibers using
the tone feature and a NOYES OFI
•• Visual Fault Locator - Visible red laser for fiber bend/break
location and tracing
OTDR test results may be saved as industry standard SOR files,
which can be transferred to a PC for viewing, printing, and
analysis using supplied Windows® compatible software.
Features
•• Rugged, hand-held and light weight (0.8 kg / 1.8 lb)
•• Standard OTDR, PON OTDR, live fiber OTDR
and FTTx PON meter all from the same test port
•• 0.8 m event dead zone, 3.5 m attenuation dead zone
•• 34 dB dynamic range
•• Fast Real Time OTDR mode
•• Internal storage (>1000 OTDR traces in .SOR format)
•• High-contrast display is clear and bright in any
lighting condition, including direct sunlight
•• Transfer test results to a PC via USB
•• 10-hour operation, fast charge, Li-Ion battery
•• Short power-on time (<5 sec)
•• Easy to learn and use
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
3
© 2008-2011, AFL, all rights reserved. OFL2-28-2000 Revision 1L, 2011-08-17
Specifications are subject to change without notice.
OFL280-10x FlexTester Family
OFL280 Features and Applications by Model
OFL280 models
Features
-100
-101
-102
-103
Compatible with all NOYES optical power meters and laser sources (OPM/OLS), including tone and
Wave ID features
Compatible with NOYES optical fiber identifiers (OFI)
Integrated hi-power optical power meter
Integrated visual fault locator (red laser)
1310 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)
1550 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)
1490 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)
1625 nm – OTDR, PON OTDR
1625 nm – FTTx live fiber OTDR with filtered detector for in-service PON testing
1490/1550 nm – FTTx PON Meter (Detects and measures downstream PON power levels)
OFL280 models
Fiber Testing Applications
-100
-101
-102
Point-to-point cable construction and troubleshooting
Fiber length, loss and ORL; splice or connection location, loss and reflectance; fault location
FTTx PON construction
Fiber length, loss, and ORL; splitter, splice or connection location, loss and reflectance; fault-location
FTTx customer fiber troubleshooting - dark fibers (hard faults)
Locate cable cuts, open splices, and bad connections
FTTx customer fiber troubleshooting - live fibers (marginal faults)
Locate marginal faults such as macro bends, poor splices, high-loss connections, high loss fiber sections
due to water intrusion (requires live fiber OTDR)
FTTx service turn-up (commissioning)
At the ONT (customer) location, verify network power levels, and if needed, locate faults
on the drop cable or customer fiber
-103
a
Notes:
a. Adds ability to perform OTDR and loss tests at 1490 nm. However, testing at 1310 and 1550 nm is recommended and generally is all that is needed
to test or fault-locate inactive (dark) FTTx PONs during construction.
OFL280-100, -101, and -102 models
OFL280-103 model
Visual Fault Locator
Visual Fault Locator
OFL280 OTDR
OFL280 OTDR
Optical Power Meter
Dark Fiber OTDR
Laser Source
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
4
Optical Power Meter
Dark Fiber OTDR
Laser Source
Live Fiber OTDR
PON Power Meter
© 2008-2011, AFL, all rights reserved. OFL2-28-2000 Revision 1L, 2011-08-17
Specifications are subject to change without notice.
OFL280-10x FlexTester Family
Specifications
a
OTDR
Emitter Type
Safety Class
Fiber Type
Available Wavelengths
Wavelength Tolerance
Dynamic Range (SNR=1)
Event Dead Zone b
Attenuation Dead Zone c
Pulse Widths
Range Settings
Data Points
Data Point Spacing
PON POWER METER for Single-mode only
Laser
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Single-mode
1310/1490/1550/1625 nm
±20/±20/±20/±10 nm
34/32/32/30 dB
0.8 m
3.5 m
5, 10, 30, 100, 300 ns, 1, 3, 10 µs
250 m to 240 km
Up to 30,000
Group Index of Refraction (GIR)
Distance Uncertainty (m)
Linearity
Trace File Format
5.0 cm (range <1.5 km),
Range/30,000 (range >1.5 km)
1.4000 to 1.6000
±(1 + 0.005 % x distance + data point spacing)
±0.05 dB/dB
Bellcore GR-196 V.1.1
Trace File Storage Medium
Data Transfer to PC
Internal memory (>1000 traces)
USB cable
PON OTDR Modes
Standard OTDR Modes
FTTx - PON Construction, FTTx - In Service
Full Auto, Expert, Real Time
Fiber Type
Available Wavelengths
Wavelength Tolerance
Spectral Width (FWHM)
Internal Modulation
Wavelength ID (one, two, or
three wavelengths)
Output Power Stability
Output Power
1490, 1550 nm
Detector Type
Isolation
Measurement Range
Accuracy d
Resolution
Measurement Units
Filtered InGaAs
> 40 dB
+23 to – 50 dBm
±0.5 dB
0.01 dB
dBm or Watts (nW, µW, mW)
Optical Power Meter
Calibrated Wavelengths
1310, 1490, 1550, 1625, 1650 nm
Detector Type
Measurement Range
Tone Detect Range
Wavelength ID Range
Accuracy e
Resolution
Measurement Units
InGaAs
+23 to -50 dBm
+3 to -35 dBm
+3 to -35 dBm
±0.25 dB
0.01 dB
dB, dBm or Watts (nW, µW, mW)
Visual Fault Locator
Emitter Type
Safety Class
Laser Source
Emitter Type
Calibrated Wavelengths
Wavelength
Output Power (nominal)
Modes
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Single-mode
1310, 1490, 1550 nm
±20 nm
5 nm (maximum)
270 Hz, 330 Hz, 1 kHz, 2 kHz, CW
Compatible with NOYES Optical Power Meters
and Light Sources
0.25 dB
-1 dBm (1310, 1550 nm) ±1.5 dB;
+3 dBm (1490 nm ) ±1.5 dB
Visible red laser
Class II FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
650 ±20 nm
0.8 mW into single-mode fiber
CW, 2 Hz flashing
General
Size (in boot)
Weight
Operational Temperature
Storage Temperature
Power
Battery Life
20.1 x 13.0 x 5.3. cm (7.9 x 5.1 x 2.1 in)
0.8 kg (1.8 lb)
-10°C to +50°C, 0 to 95 % RH (non-condensing)
-20°C to +60°C, 0 to 95 % RH (non-condensing)
Rechargeable Li-Ion or AC adapter
10 hours, backlight ON, continuous operation
Display
LCD, 320 x 240, 3.5 inch (89 mm), color,
high-contrast transflective with backlight
and AR coating
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Typical distance between the two points 1.5 dB down each side of a reflective spike caused by a -45 dB event using 5 ns pulse width.
c. Typical distance from the location of a -45 dB reflective event to the point where the trace falls and stays within 0.5 dB of backscatter, using a 5 ns pulse width.
d. At calibration wavelengths and power levels of approximately -5 dBm for 1550 nm and -10 dBm for 1490 nm.
e. At calibration wavelengths and power level of approximately -10 dBm.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
5
© 2008-2011, AFL, all rights reserved. OFL2-28-2000 Revision 1L, 2011-08-17
Specifications are subject to change without notice.
OFL280-10x FlexTester Family
Ordering Information
All OFL280 FlexTester models come with a carry case, (1) SC and (1) FC adapter for the OTDR/OLS port, (1) 2.5 mm universal adapter
for the OPM port, (1) 2.5 mm universal adapter for the VFL port, One-Click Cleaner SC/ST/FC (2.5 mm), USB cable (connects with Type
A USB port on your PC), and AC power adapter with a country-specific power cord.
WAVELENGTHS and added features
notes
AFL No.
1310, 1550 nm
1310, 1550, 1625 nm
1310, 1490, 1550 nm
1310, 1550, 1625 nm, Live Fiber filter, PON meter
Dual-wavelength OTDR/Loss test set for both point-to-point and PON applications
Adds ability to test at 1625 nm (L band)
Adds ability to test at 1490 nm (FTTx downstream data)
Adds ability to test (dark fibers) at 1625 nm (L band), filter to test FTTx live fibers at 1625 nm,
and PON meter to measure FTTx downstream power at 1490 and 1550 nm
OFL280-100
OFL280-101
OFL280-102
OFL280-103
When placing an order, select options as follows:
Optical Configuration (NN), OTDR port ferrule type (F), and Language of the provided Quick Reference Guide (LLL)*.
Example: OFL280-102U-ENG indicates a three-wavelength (1310/1490/1550 nm) OFL280 with UPC OTDR port ferrule
and Quick Reference Guide printed in English.
OFL280
NNN
F
LLL
Quick Reference Guide Language (LLL)*
ENG= English
CHS = Simplified Chinese
Optical Configuration (NN)
100= 1310/1550 nm
101= 1310/1550/1625 nm
102= 1310/1490/1550 nm
103= 1310/1550/1625 nm, Live Fiber filter, PON meter
* All OFL280 models come preloaded with the
GUI in English, Simplified Chinese, and other
languages. Contact AFL for a complete list of
currently available languages (GUI and printed
Quick Reference Guide).
OTDR port ferrule (F)
A =APC
U =UPC
Available Accessories
Description
AFL NO.
Description
AFL NO.
FC adapter, OTDR/OLS port
2900-50-0002MR
1.25 mm adapter, OPM port
2900-52-0006MR
SC adapter, OTDR/OLS port
2900-50-0003MR
ST adapter, OTDR/OLS port
2900-50-0004MR
LC adapter, OTDR/OLS port
2900-50-0006MR
FC adapter, OPM port
2900-52-0001MR
SC adapter, OPM port
2900-52-0002MR
ST adapter, OPM port
2900-52-0003MR
2900-53-0001MR
2900-53-0002MR
8800-00-0072PR
FR1-SM-150-y1-y2 a
1400-01-0045
EWxY-xx-xxxx
LC adapter, OPM port
2900-52-0004MR
2.5 mm adapter, VFL port
1.25 mm adapter, VFL port
Dust cap for UCI outputs
Fiber Ring, SM, 150 m
Soft carry case
Extended Warranty and pre-paid annual calibration plans
available for 1, 2 and 4 years (contact factory)
2.5 mm adapter, OPM port
2900-52-0005MR
a. When ordering Fiber Rings, specify connector types (y1,y2); 500 and 1000 m lengths also available.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
6
© 2008-2011, AFL, all rights reserved. OFL2-28-2000 Revision 1L, 2011-08-17
Specifications are subject to change without notice.
M210 Multifunction Micro OTDR
Test, Troubleshoot and Document Single-mode and Multimode Fiber Networks
Features
•• 30 dB dynamic range single-mode
•• 16-hour battery life
•• Remote display capable
•• Touch and Test™ intuitive user interface
•• New faster processor
•• Crisp bright display for indoor/outdoor viewing
•• Integrated OPM standard; integrated VFI standard
•• Inspection capable with DFS1 Digital FiberScope
•• Rugged, hand-held, lightweight (<1 kg)
•• Prepaid Calibration plans, Cal and Cal Plus (see page 12)
Test Modes
•• Full Auto OTDR – Normal (point-to-point) fiber cable construction
testing and fault location
•• Expert OTDR – Full function OTDR for experienced users includes
Auto and Auto-Once setup
•• Real-Time OTDR – Fault location, splice verification
•• Optical Power Meter – Measure optical power or fiber loss
•• Visual Fault Identifier – Red laser for fiber bend and break location
Languages supported
•• English
•• French
•• German
•• Italian
M210 OTDR with DFS1 Digital FiberScope
•• Spanish
•• Polish
•• Portuguese
The NOYES M210 is the only inspection ready QUAD OTDR that combines OTDR, OPM and VFI capability with a proven, easy-to-use
and easy-to-learn user interface. The M210 is the latest addition to the M200 family of OTDRs. Like other members of the M200 family,
the M210 offers the intuitive Touch and Test user interface in a rugged, lightweight, easy-to-hold package ready for field use. The M210
features a more powerful processing engine, a higher resolution display and, for the first time in an OTDR of its size, an integrated
Optical Power Meter.
Touch and Test simplifies the M210 user experience, minimizes human errors and reduces training time by providing one-touch access
to the Full-Auto, Expert and Real-Time OTDR test modes, OPM measurement mode as well as the Results Management and Job
Creation menus. The M210 allows setting Pass/Fail thresholds to industry standard TIA/ISO or user-values and will automatically alert
users of failing fibers. Touch and Test enables both experts and novices alike to complete jobs more accurately and in less time.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
7
© 2012, AFL, all rights reserved. M210-00-2000 Revision 1A, 2012-01-09
Specifications are subject to change without notice.
M210 Multifunction Micro OTDR
M210 OTDR Soft and Hard Case Options
The M210 micro OTDR is available as a single-mode, multimode or single-mode/
multimode model in either a soft or hard case and as part of a QUAD Certification
kit or QUAD Test and Inspection kit. M210 OTDRs are ideal for testing, analyzing and
troubleshooting enterprise, LAN/WAN, campus and military single-mode and multimode
(62.5 and 50 micron) fiber networks.
M210 QUAD Certification Kit (Tier 1 and Tier 2)
All M210 models support IEC 61300-3-35 fiber end-face visual inspection practices
using a NOYES DFS1 Digital FiberScope. OTDR traces (.sor format), OPM measurement
results and fiber end-face images can be saved together in a job. These results can be
downloaded to a computer for analyzing and editing using the included companion,
NOYES Test Results Manager™ application software.
M210 QUAD Certification Kit in Hard Transit Case
M210 QUAD Test and Inspection Kit (Tier 2)
This kit is designed for integrated single-mode and multimode Tier 1 and Tier 2 testing
with fiber end-face image capture. The M210 stores OTDR traces, loss readings and
end-face images in a logical Job Structure for each fiber. Review results on the M210
and transfer to a PC for analysis and acceptance report documentation using included
companion Test Results Manager (TRM) software. In TRM, apply standards and
applications to loss readings to assure fibers meet the increasing bandwidth needs
of fiber networks such as 10 GbE. This kit includes the QUAD M210, OLS4 LED/Laser
Source, DFS1 FiberScope and cleaning accessories in a compact hard transit case.
The hard transit case is a rugged, injection molded ABS case with a full length hinge,
padlock loops, secure latches and O-ring seal to protect the contents from dust and
water. The case is large enough to hold test, inspection and cleaning accessories and
small enough to carry on an airplane. See page 3 for available accessories.
M210 QUAD Test and Inspection Kit in Hard Transit Case
This kit is designed for performing Tier 2 OTDR testing and troubleshooting and end-face
inspection. This kit includes the QUAD M210, DFS1 FiberScope and cleaning accessories
in a compact rugged hard transit case. See page 3 for available accessories.
M210 OTDR in Hard Transit Case
M210 OTDR in Hard Transit Case
Available in SM, MM or QUAD OTDR models. The hard transit case is large enough for
optional test, inspection and cleaning accessories. See page 3 for available accessories.
M210 OTDR in Soft Case
Available in SM, MM or QUAD OTDR models. The soft case has a shoulder strap and a
large pocket to simplify carrying equipment in the field. The pocket is large enough to
accommodate cleaning and test accessories. See page 3 for available accessories.
M210 OTDR in Soft Case
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
8
© 2012, AFL, all rights reserved. M210-00-2000 Revision 1A, 2012-01-09
Specifications are subject to change without notice.
M210 Multifunction Micro OTDR
Test Results Manager Software
Test, Inspection and Cleaning Accessories
Using Test Results Manager (TRM), the companion PC software
included with all M210 OTDRs, users can create acceptance
reports conforming to industry guidelines. TRM allows users to
create customized cover pages with their company logos and
generate results pages showing dual wavelength traces and
event tables, end-face image, Event Map and loss data for
each fiber.
DFS1 FiberScope Inspection Kit
SC, ST, FC LC/MU
FCP2-00-0900 Basic Cleaning Kit
D-LC
Ultra 2.5
Mini-100 SC, ST, FC, LC/MU
One-Click Cleaner Series
Accessories Ordering Information
Description
DFS1 Digital FiberScope PC/UPC inspection kit
DFS1 Digital FiberScope APC inspection kit
DFS1 Digital FiberScope kit without adapters
Fiber Ring, 50/125 µm multimode, 150 m
Fiber Ring, Laser Optimized, 50 µm multimode, 150 m
Fiber Ring, 62.5/125 mm multimode, 150 m
Fiber Ring, single-mode, 150 m
Wet Cleaning kit for SC/FC/ST/LC connectors
Dry Cleaning kit
Basic Cleaning kit with carry case (includes One-Clicks,
FCC2 cleaning fluid, FiberWipes, Cletop SB)
Basic Cleaning kit with MPO Cleaners and carry case
(includes One-Clicks, FCC2 cleaning fluid, FiberWipes,
Cletop SB, MPO/MTP Cleaner)
One-Click Cleaner SC, ST, FC (500+ cleans)
One-Click Cleaner LC/MU (500+ cleans)
One-Click Mini-100 SC, ST, FC (100+ cleans)
One-Click Mini-100 LC/MU (100+ cleans)
One-Click Cleaner Ultra 2.5 SC, ST, FC (enlarged cleaning)
One-Click Ultra Cleaner D-LC (Duplex LC, 500 cleans x 2)
TRM Certification report page
AFL NO.
DFS1-00-04XU
DFS1-00-04XA
DFS1-00-04XN
FR1-M5-150-x1-x2 a
FR1-L5-150-x1-x2 a
FR1-M6-150-x1-x2 a
FR1-SM-150-y1-y2 a
8500-20-0900
8500-20-0901
FCP2-00-0900
FCP2-00-0901
8500-05-0001MZ
8500-05-0002MZ
8500-05-0005MZ
8500-05-0006MZ
8500-05-0007MZ
8500-05-0008MZ
Note:
a. When ordering Fiber Rings, specify connector types (x1, x2, y1, y2).
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
9
© 2012, AFL, all rights reserved. M210-00-2000 Revision 1A, 2012-01-09
Specifications are subject to change without notice.
M210 Multifunction Micro OTDR
Specifications
a
OTDR
Emitter Type
Safety Class
Multimode
Laser
Class I FDA 21 CFR 1040.10 and 1040.11; IEC 60825-1:2007-03
Single-mode
Laser
Class I FDA 21 CFR 1040.10 and 1040.11; IEC 60825-1:2007-03
Center Wavelengths
850/1300 nm
1310/1550 nm
Wavelength Tolerance
±20/±30 nm
±20/±30 nm
Dynamic Range (SNR = 1) b
26 dB
30 dB
Event Dead Zone c
1.5 m
1.5 m
Attenuation Dead Zone d
Pulse Widths
Range Settings
Sampling Points
Minimum Data Point Spacing e
Group Index of Refraction (GIR)
9m
10, 30, 100, 300 ns, 1 µs
250 m to 32 km
Up to 16,000
0.25 m
1.4000 to 1.6000
9m
10, 30, 100, 300 ns, 1, 3, 10 µs
250 m to 208 km
Up to 16,000
0.25 m
1.4000 to 1.6000
Distance Uncertainty/Accuracy f
Linearity g
Loss Threshold
Loss Resolution
Reflectance Resolution
Reflectance Accuracy h
Real Time Refresh Rate
Units
OTDR Modes
Trace File Format
Trace File Storage Medium
Trace File Storage Capacity
Trace File Transfer to PC
±(1 + 0.005 % x distance + data point spacing)
±0.05 dB/dB
0.02 dB
0.01 dB
0.01 dB
±2 dB
1 Hz j
±(1 + 0.005 % x distance + data point spacing)
±0.05 dB/dB
0.02 dB
0.01 dB
0.01 dB
±2 dB
1 Hz k
m, km, ft, kft, mi
Full Auto, Expert, Real-Time
Bellcore GR-196 Version 1.1
Internal and USB
>1000 internal, 1000s on USB
USB
Notes:
a. All specifications valid at 23°C ±2°C (73.4°F ±3.6°F) unless otherwise specified.
b. Longest Range and Pulse Width, 3 minutes Averaging Time, Filter on.
c. Typical distance between the two points 1.5 dB down each side of a reflective spike caused by a -40 dB (multimode)
or -45 dB (single-mode) event using 10 ns pulse width.
d. Typical distance from event location to point where trace is within 0.5 dB of backscatter.
e. Range <8 km.
f. Does not include GIR uncertainty.
g.Typical.
h. For a non-saturated event.
j. 16 km Range, Filter off.
k. 32 km Range, Filter off.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
10
© 2012, AFL, all rights reserved. M210-00-2000 Revision 1A, 2012-01-09
Specifications are subject to change without notice.
M210 Multifunction Micro OTDR
Specifications
OPM (Standard)
Calibrated Wavelengths
Detector Type
Display Range b
Accuracy @ -10 dBm
Resolution
Measurement Units
Wavelength ID c
Set Reference
Data Storage
Tone Detection d
VFI (Standard)
Emitter Type
Safety Class
Wavelength
Output Power (nominal)
General
Display Type
Size (in boot)
Weight
Power
Battery Life e
Recharge Time f
Auto Shut Off
Connectivity
Operating Temperature
a
850, 1300, 1310, 1490, 1550, 1625, 1650 nm (displays up to 3 simultaneously)
InGaAs 2mm
+6 to -70 dBm
±0.25 dB
0.01 dB
dB, dBm, mW
Yes
Yes
Yes
270 Hz, 330 Hz, 1 kHz, 2 kHz
Laser
Class II FDA 21 CFR 1040.10 and 1040.11; IEC 825-1:1993, 60825-1:2007-03
635 nm ±20 nm
0.8 mW
3.5-inch transflective color, high contrast, high reflectivity (20%) for optimum indoor/outdoor viewing , QVGA with touchscreen
23 x 11 x 7 cm (8.8 x 4.3 x 2.8 in)
<1.4 kg (3 lb)
Removable Li-ion or AC/DC power adapter (input 100-240 V, ~1.5 A 47-63 Hz) output 18 V DC/3.6 A (can test while charging,
can operate on AC with battery removed)
16 hours
4 hours
0-60 minutes
USB host/full speed 1.1
-10°C to +50°C
Storage Temperature
Relative Humidity
DFS1 Digital FiberScope support
Field of View
Optical Resolution
Detection Capability
-20°C to +60°C
0 to 95 % RH (non-condensing)
400 x 300 µm
4 µm
2 µm
Notes:
a. All specifications valid at 23°C ±2°C (73.4°F ±3.6°F) unless otherwise specified.
b. Measurement Range:
+3 to -65 dBm for 1300 to 1625 nm, and +3 to -60 dBm for 850 nm
c. Wavelength ID Range:
+3 to -50 dBm for 1300 to 1625 nm, and +3 to -40 dBm for 850 nm
d. Tone Detect Range:
+3 to -50 dBm 1300 to 1625 nm, and +3 to -40 dBm for 850 nm
e. Typical with new battery, per GR-196-Core Issue 2.
f. Typical, from fully discharged to fully charged state, unit may be operating.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
11
© 2012, AFL, all rights reserved. M210-00-2000 Revision 1A, 2012-01-09
Specifications are subject to change without notice.
M210 Multifunction Micro OTDR
M210 Models and Included Adapters
WAVELENGTHS (nm)
850
1300
1310
OPM port
adapters
AFL BASE
MODEL NO.
SC, FC
SC, 2.5 mm Universal
M210-20
26/26
SC, ST
SC, 2.5 mm Universal
M210-22
26/26/30/30
SC, FC, ST
SC, 2.5 mm Universal
M210-25
DYNAMIC OTDR Port
RANGE (dB) Adapters
1550
30/30
All M210 OTDRs include a USB flash
drive, an AC adapter, UCI switchable
adapters for OTDR and OPM ports, trace
analysis and documentation software and
a quick reference guide.
Ordering Information
Description
M210 QUAD Certification Kit (Tier 1 and 2): M210 QUAD, OLS4, DFS1* in hard case
M210 QUAD Test and Inspection Kit (Tier 2): M210 QUAD, DFS1* in hard case
M210 OTDR, SM (1310/1550), OPM, VFI in hard case
M210 OTDR, MM (850/1300) OPM, VFI in hard case
AFL NO.
M210-25K-01-HC2
M210-25K-01-HC1
M210-20U-01-HC
M210-22U-01-HC
When ordering, select options as follows:
Optical Configuration (NN), (U) for UPC
connection and Language (LL). Add (HC)
only if ordering the hard case option.
M210 OTDR, QUAD (850/1300/1310/1550), OPM, VFI in hard case
M210 OTDR, SM (1310/1550) OPM, VFI in soft case
M210 OTDR, MM (850/1300) OPM, VFI in soft case
M210 OTDR, QUAD (850/1300/1310/1550), OPM, VFI in soft case
M210-25U-01-HC
M210-20U-01
M210-22U-01
M210-25U-01
Example: M210-25U-01-HC -> This
model number indicates M210 QUAD
with the English/European language pack
in the optional hard case.
* When ordering, specify DFS1 model. The DFS1 FiberScope kit is available as either PC/UPC inspection kit
(DFS1-00-04XU model) or APC inspection kit (DFS1-004XA model).
M210
NN
U
LL
Optical Configuration (NN)
20 = 1310/1550 nm SM
22 = 850/1300 nm MM
25 = 850/1300 nm MM and 1310/1550 nm SM
HC
Hard Case option (HC)
(Select (HC) only if ordering hard case option)
Language (LL)
01 = English, French, German, Italian,
Polish, Portuguese, Spanish
OTDR port ferrule (U = UPC)
Calibration Plans
M210 OTDR and/or kit
model
M210-25K-01-HC1
M210-25K-01-HC2
M210-20U-01-HC
M210-22U-01-HC
M210-25U-01-HC
M210-20U-01
M210-22U-01
M210-25U-01
2 YR Cal Plan
AFL NO.
CAL2-00-M210-25K-HC1
CAL2-00-M210-25K-HC2
CAL2-00-M210-20
CAL2-00-M210-22
CAL2-00-M210-25
CAL2-00-M210-20
CAL2-00-M210-22
CAL2-00-M210-25
2 YR Cal Plus Plan
AFL NO.
CAL2-01-M210-25K-HC1
CAL2-01-M210-25K-HC2
CAL2-01-M210-20
CAL2-01-M210-22
CAL2-01-M210-25
CAL2-01-M210-20
CAL2-01-M210-22
CAL2-01-M210-25
AFL recommends annual calibrations
on NOYES Test and Inspection products.
Prepaid Cal plans offer two annual
calibrations at a discounted price, a
convenient calibration expiration email
service, express calibration services and
access to the NOYES product knowledge
base. Cal Plus plans offer the same
services as the Cal plans with the
addition of a two year extended warranty
(three years total coverage).
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
12
© 2012, AFL, all rights reserved. M210-00-2000 Revision 1A, 2012-01-09
Specifications are subject to change without notice.
M700-Series OTDR
The NOYES M700 OTDR from AFL combines ease of use (Touch
and Test™) and functionality in a field-rugged, hand-held package.
With single-mode dynamic ranges up to 40 dB and multimode
dynamic ranges of 26 dB, the M700 OTDR is ideal for testing and
troubleshooting LAN/WAN, metro, FTTx and long haul networks.
Industry leading dead zones of less than 1.0 m enhance the user’s
ability to locate and measure events. Testing at 1310 and 1550
nm is normally sufficient to certify point-to-point or FTTx PON
fibers and allows the detection of macrobends.
M700 Compact QUAD OTDR
The M700 supports Full Auto, Expert (manual) and Real-Time
OTDR test modes, precision event analysis, multi-wavelength
testing and visual inspection per IEC 61300-3-35 using the
DFS1 Digital FiberScope allowing users the ability to view
and document connector end-face images with their OTDR
traces and loss results. Pass/Fail acceptance to TIA/ISO values
or user-defined values can be set to alert the test operator of
failing or marginal events. These capabilities simplify the user
experience, reduce training time and testing errors enabling
even novices to get the job done quickly and accurately.
Thousands of OTDR test results may be saved as standard .SOR
files and stored internally or on the supplied USB drive. Test results
are transferable via a USB cable or USB drive to a computer for
viewing, printing, and analyzing with the supplied Windows®
compatible software, Test Results Manager (TRM™). Saved OPM
loss values for a cable in one or two directions can be displayed in
a table on the M700 for evaluation and comparison. Acceptance
reports generated using TRM can include Loss tables, OTDR
traces with summary and event information with or without Pass/
Fail indication and Channel Maps. With a full set of testing tools
including OTDR, OPM, VFL and end-face inspection capability
the M700 is a complete solution for fiber network owners and
installers.
M700 OTDR with DFS1 Digital FiberScope
Features
•• Integrated OPM and VFL (650 nm)
•• Inspection capable with the DFS1 FiberScope
•• Full Auto, Expert and Real-Time OTDR test modes
•• Automatic Pass/Fail analysis (TIA/ISO)
•• Touch and Test™ user interface
•• Tool-free, switchable test port adapters
•• Bellcore (GR-196) .SOR file format
•• Internal (1000s test results) and USB storage
•• > 8 hours battery life or AC power
•• USB host and function ports
•• TRM™ reporting software
Applications
•• Tier 1 and 2 testing of premise networks
•• Metro, FTTx and Service Provider networks testing
•• Interoffice networks
•• Loss or power measurement storage
•• Fault location with integrated VFL
•• Splice verification
•• Network documentation including Pass/Fail event analysis
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
13
© 2010-2011, AFL, all rights reserved. M700-10-2000 Revision 1B, 2011-06-22
Specifications are subject to change without notice.
M700-Series OTDR
Specifications
a
OTDR
Single-mode otdr
dual-wave
Emitter Type
Safety Class
Center Wavelengths
Wavelength Tolerance
Dynamic Range (SNR = 1)
Event Dead Zone
Attenuation Dead Zone
Pulse Widths
Range Settings
Sampling Points
Minimum Data Point Spacing
Group Index of Refraction
(GIR)
Distance Uncertainty (m) g
Linearity h
Loss Threshold
Loss Resolution
Reflectance Accuracy j
Trace File Format
Trace File Storage Media
Trace File Storage Capacity
Data Transfer to PC
OTDR Modes
Tool Free Adapters
triple-wave
Long range quad OTDR
Multimode
Single-mode
QUAD OTDR
Multimode
Single-mode
Laser
Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
1310/1550 nm 1310/1550/1625 nm
850/1300 nm
1310/1550 nm
850/1300 nm
1310/1550 nm
±25/25 nm
±25/25/10 nm
±25/25 nm
±25/25 nm
±20/30 nm
±20/30 nm
40/38 dB
40/38/38 dB
24/24 dB b
39/37 dB
22/22 dB b
26/26 dB
0.8 m c
0.9 m c
0.9 m c
1.5 m e
1.5 m e
0.8 m c
4.5 m d
4.5 m d
4.5 m d
4.5 m d
9mf
9mf
5, 10, 30, 100, 300 ns;
5,10, 30, 100, 300 ns; 5,10, 30, 100, 300 ns; 10, 30, 100, 300 ns; 10, 30, 100, 300 ns;
1, 3, 10, 20 µs
1 µs
1, 3, 10, 20 µs
1 µs
1, 3, 10 µs
250 m to 256 km
250 m to 64 km
250 m to 256 km
250 m to 64 km
250 m to 208 km
Max. 64,000 points
Max. 64,000 points
Max. 16,000 points
0.125 m
0.125 m
0.25 m
1.4000 to 1.6000
1.4000 to 1.6000
1.4000 to 1.6000
±(1 + 0.0005 % x distance + data point spacing)
±0.05 dB/dB
0.05 dB
0.01 dB
±2 dB
±(1 + 0.005 % x distance + data point
spacing)
±0.05 dB/dB
±0.05 dB/dB
0.05 dB
0.05 dB
0.01 dB
0.01 dB
±2 dB
±2 dB
SR-4731 (GR-196-CORE Appendix A & B and SR-4731)
Internal flash memory
USB flash drive (2 USB host ports)
Downloadable from OTDR directly to PC
Internal 1000 fibers
USB
Full Auto, Real Time, Expert
SC/ST/FC/LC
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. 62.5 µm fiber.
c. Typical distance between the two points 1.5 dB down each side of an event with reflection <-45 dB for SM
and <-40 dB (unsaturated) for MM using a 5 ns pulse width.
d. Typical distance from event location to point where trace is within 0.5 dB of backscatter caused by an event
with reflection <-45 dB for SM and <-40 dB (unsaturated) for MM using a 5 ns pulse width.
e. Typical distance between the two points 1.5 dB down each side of an event with reflection <-45 dB for SM
and <-40 dB (unsaturated) for MM using a 10 ns pulse width.
f. Typical distance from event location to point where trace is within 0.5 dB of backscatter caused by an event
with reflection <-45 dB for SM and <-40 dB (unsaturated) for MM using a 10 ns pulse width.
g. Does not include GIR uncertainty.
h.Typical.
j. For a non-saturated event.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
14
© 2010-2011, AFL, all rights reserved. M700-10-2000 Revision 1B, 2011-06-22
Specifications are subject to change without notice.
M700-Series OTDR
Specifications
a
Power Meter
Single-mode Otdr
dual-wave
Long range quad OTDR
triple-wave
Multimode
Single-mode
QUAD OTDR
Multimode
Single-mode
850, 980, 1300, 1310, 1490, 1550,
1625 nm (displays up to 3 simultaneously)
850, 980, 1300, 1310, 1490, 1550,
1625 nm (displays up to 3 simultaneously)
850, 980, 1300, 1310, 1490, 1550,
1625 nm (displays up to 3 simultaneously)
Filtered InGaAs detector
InGaAs 2 mm
InGaAs 2 mm
+26 to -50 dBm
+6 to -70 dBm
+6 to -70 dBm
±0.25
±0.25
±0.25
dB, dBm, mW
dB, dBm, mW
dB, dBm, mW
Wavelength ID c
Yes
Yes
Yes
Set Reference
Yes
Yes
Yes
Data Storage
Yes
Yes
Yes
270 Hz, 330 Hz, 1 kHz, 2 kHz
270 Hz, 330 Hz, 1 kHz, 2 kHz
270 Hz, 330 Hz, 1 kHz, 2 kHz
Single-mode Otdr
Long range quad OTDR
QUAD OTDR
Calibrated Wavelengths
Detector Type
Measurement Range (dBm)
Accuracy b
Measurement Units
Tone Detection
Visual Fault Locator
Emitter Type
Laser
Safety Class
Class II FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Wavelength
650 nm
Output Power (nominal)
0.8 mW
Single-mode Otdr
General
Display
Long range quad OTDR
Anti-Reflective (AR) Coating
Size
Yes
Yes
Yes
Yes
—
—
190.5 x 269.2 x 69.8 mm (7.5 x 10.6 x 2.75 in)
Weight
2.36 kg ( 5.22 lb)
Operating Temperature
-10°C to+50°C, 0 to 90 % RH (non-condensing)
Storage Temperature
-20°C to+60°C, 0 to 90 % RH (non-condensing)
Power
Rechargeable Li-Ion or AC power adapter
Battery Life d, f
Recharge Time
QUAD OTDR
16.51 cm (6.5 in), color, transflective (indoor/outdoor) touch screen display
>8 hours continuous OTDR testing
4 hours
e, f
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at 25 ºC and -10 dBm per N.I.S.T. standards.
c. Automatic wavelength identification and switching when used with NOYES Wave ID Series Light Sources.
d. Typical, depending on display brightness.
e. Typical, from fully discharged to fully charged state, unit may be operating.
f. External battery charger available.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
15
© 2010-2011, AFL, all rights reserved. M700-10-2000 Revision 1B, 2011-06-22
Specifications are subject to change without notice.
M700-Series OTDR
Ordering Information
Each M700 model includes the M700 OTDR, USB Flash drive, PC software for OTDR trace analysis and OPM loss reporting, AC adapter,
switchable test ports adapters and cleaning accessories in a soft carry case (see table below).
OTDR
carry Case
Cleaning Products
OTDR Port Adapters
OPM port Adapters
VFI port Adapters
M700-20, M700-21
Soft case
One-Click Cleaner SC/ST/FC, 2.5 mm
SC, FC, LC
SC, 2.5 mm, 1.25 mm
2.5 mm 1.25 mm
M700-24, M700-25
Soft case
One-Click Cleaner SC/ST/FC, 2.5 mm
SC, ST, LC
SC, 2.5 mm, 1.25 mm
2.5 mm 1.25 mm
The M700 OTDR works with the DFS1 Digital FiberScope.
Model Configurator
When placing an order, select options as follows: Optical Configuration (NN), OTDR port ferrule (F), and Language (LL).
Example: M700 — 25U — 01 The model number M700 — 25U — 01 indicates M700 QUAD with UPC OTDR port ferrule
and English language option.
M700
NN
F
Optical Configuration (NN)
20 = 1310/1550 nm SM
21 = 1310/1550/1625 nm SM
24 = QUAD LR (long range):
850/1300 nm MM and 1310/1550 nm SM
25 = QUAD: 850/1300 nm MM and 1310/1550 nm SM
LL
Language (LL)
All (LL) options support English language
01 =English
05 =Spanish
08 = Chinese (Simplified/Traditional)
11 =Portuguese
OTDR port ferrule (F)
A =APC
U =UPC
Specify power cord type (country) when ordering an M700 OTDR. One power cord is included with each AC adapter at no charge.
Additional power cords may be purchased separately.
Description
Country
AFL no.
3-conductor, IEC320, 115V, Type K
3-conductor, IEC320, 250V, Type B
3-conductor, IEC320, 250V, Type D
3-conductor, IEC320, 250V, Type C
3-conductor, IEC320, 250V, Type E
2-conductor, IEC320, 125V, Type M
3-conductor, IEC320, 250V, Type L
3-conductor, IEC320, 250V, Type I
3-conductor, IEC320, 250V, Type H
3-conductor, IEC320, 250V, Type G
USA
Europe
UK
Australia, China
Denmark
Japan
Switzerland
Italy
Israel
India
6000-00-0001MR
6000-00-0012MR
6000-00-0015MR
6000-00-0016MR
6000-00-0017MR
6000-00-0018MR
6000-00-0019MR
6000-00-0020MR
6000-00-0021MR
6000-00-0022MR
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
16
© 2010-2011, AFL, all rights reserved. M700-10-2000 Revision 1B, 2011-06-22
Specifications are subject to change without notice.
M700-Series OTDR Accessories
Preconfigured Accessories Kit M700 - H1
The M700 - H1 is a preconfigurated accessories kit (M700 OTDR is not included).
Description
AFL nO.
Hard case with One-Click Cleaner SC/ST/FC (2.5 mm), One-Click Cleaner LC/MU (1.25 mm), and Cletop-SB white tape
M700 - H1
Custom kits may be created by ordering an M700 OTDR model, the H1 carry case and accessories from the Accessories table (below).
The H1 hard carry case has room for up to 6 Fiber Rings, jumpers in a jumper carry case, the DFS1 Digital FiberScope kit, OLS2-Dual
or OLS4 optical light source, and cleaning accessories (items must be ordered separately).
Accessories
Description
Hard case with One-Click Cleaner SC/ST/FC (2.5 mm), One-Click Cleaner LC/MU (1.25 mm), and Cletop-SB white tape
DFS1 Digital FiberScope PC/UPC Inspection Kit
DFS1 Digital FiberScope APC Inspection Kit
DFS1 USB Digital Fiber Inspection Kit without Adapters
OLS2-Dual laser light source with Wave ID, 1310/1550 nm
OLS4 integrated LED and laser light source with Wave ID, 850/1300/1310/1550 nm
Fiber Ring, standard, 1 fiber, 50/125 µm multimode, 150 m
Fiber Ring, standard, 1 fiber, Laser Optimized, 50 µm multimode, 150 m
Fiber Ring, standard, 1 fiber, 62.5/125 µm multimode, 150 m
Fiber Ring, standard, 1 fiber, single-mode, 150 m
Wet Cleaning Kit (shown) for SC/FC/ST/LC connectors
Dry Cleaning Kit
One-Click Cleaner SC, ST, FC (500+ cleans)
One-Click Cleaner LC/MU (500+ cleans)
One-Click Mini-100 SC, ST, FC (100+ cleans)
One-Click Mini-100 LC/MU (100+ cleans)
One-Click Cleaner Ultra 2.5 SC, ST, FC (enlarged cleaning)
Zippered Jumper Carry Case
AFL nO.
M700-H1
DFS1-00-04XU
DFS1-00-04XA
DFS1-00-04XN
OLS2-Dual
OLS4
FR1-M5-150-x1-x2 a
FR1-L5-150-x1-x2 a
FR1-M6-150-x1-x2 a
FR1-SM-150-y1-y2 a
8500-20-0900
8500-20-0901
8500-05-0001MZ
8500-05-0002MZ
8500-05-0005MZ
8500-05-0006MZ
8500-05-0007MZ
1400-01-0086PZ
Notes:
a. When ordering Fiber Rings, specify connector types (x1, x2, y1,y2).
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
17
© 2010-2011, AFL, all rights reserved. M700-10-2000 Revision 1B, 2011-06-22
Specifications are subject to change without notice.
C850 Compact QUAD OTDR with QUAD OLS and OPM
The NOYES C850 Certification OTDR from AFL combines ease
of use (Touch and Test™) and multiple functionality in a handheld test set designed for testing and inspecting multimode and
single-mode fibers. The C850 integrates an OTDR with Optical
Light Sources (OLS), an Optical Power Meter (OPM), Visible
Fault Locator (VFL) and inspection capability for testing and
troubleshooting enterprise networks. OTDR Auto modes, OPM
Wave ID, and Pass/Fail thresholds simplify the user experience,
reduce training time and testing errors enabling even novice
users to get the job done quickly and accurately.
The C850 OTDR combines ease-of-use and functionality for
performing OTDR and loss testing of optical fibers in enterprise
networks (campus and buildings). OTDR and OPM test results
for the same fibers are stored in logical job folders by cables
allowing for easy review, selection, maintenance, and report
generation using supplied Windows® compatible software.
The C850 OTDR can be used in pairs or with a C840 to perform
Tier 1 dual-wavelength, two fiber bi-directional tests. Loss and
length can be measured and compared to ISO/TIA/EN or User
standards or applications to provide Pass/Fail feedback regarding
the fibers ability to meet the acceptance criteria to be certified.
C850 Compact QUAD OTDR
The C850 supports visual inspection per IEC 61300-3-35 using
the DFS1 Digital FiberScope allowing users the ability to view
and document connector end-face images with their OTDR traces
and loss results.
C850 OTDR with DFS1 Digital FiberScope
Features
Thousands of OTDR test results may be saved as standard .SOR
files, which can be stored internally or on the supplied USB drive.
Test results are transferable via a USB cable or USB drive to a
computer for viewing, printing, and analyzing with the supplied
Windows® compatible software - TRM™ (Test Results Manager).
Acceptance reports generated using TRM™ can include OTDR
traces with summary and event information with or without Pass/
Fail indication, Event maps, and end-face images.
•• OTDR dynamic range: 22 dB (MM), 26 dB (SM)
•• Inspection capable with the DFS1 Digital FiberScope
•• Integrated OPM, OLS, and VFL (650 nm)
•• Full Auto, Expert, Real-Time OTDR test modes
•• Touch and Test™ user interface
•• Automatic Pass/Fail analysis (TIA/ISO/EN)
•• Bellcore (GR-196) .SOR file format
•• Internal (1000s tests) and USB storage
•• Wave ID detect if used with NOYES Wave ID series light sources
•• >8 hours battery life or AC power
•• USB host and function ports
•• TRM™ reporting software
Applications
•• Tier 1 and Tier 2 testing of premise networks
•• Bi-directionally measure loss and length of fiber links
•• Perform Pass/Fail Event and Link measurements
•• Certify fibers using Pass/Fail criteria of industry standards,
applications and user-defined limits
•• Create professional certification reports
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
18
© 2009-2011, AFL, all rights reserved. C850-00-2000 Revision 1E, 2011-06-22
Specifications are subject to change without notice.
C850 Compact QUAD OTDR with QUAD OLS and OPM
Specifications
a
OTDR
Multimode
Single-mode
Emitter Type
Laser
Safety Class
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Center Wavelengths
Wavelength Tolerance
Dynamic Range (SNR = 1)
850/1300 nm
±20/30 nm
1310/1550 nm
±20/30 nm
22 dB
26 dB
Event Dead Zone b
Attenuation Dead Zone
Power Meter
Calibrated Wavelengths
Detector Type
Measurement Range
Accuracy h
Measurement Units
Wavelength ID j
Set Reference
Data Storage
Tone Detection
general
1.5 m
c
9m
Pulse Widths
10, 30, 100, 300 ns; 1, 3, 10 µs
Range Settings
250 m to 64 km
Sampling Points
Minimum Data Point Spacing
Group Index of Refraction
(GIR)
Distance Uncertainty (m)
250 m to 208 km
Test Modes
Up to 16,000
d
Linearity e
0.25 m
Trace File Format
1.4000 to 1.6000
±0.05 dB/dB
0.05 dB
Loss Resolution
0.01 dB
Reflectance Accuracy f
±2 dB
Wavelength
Output Power (nominal)
Light Source
Available Wavelengths
(nominal)
Emitter Type
Safety Class
Output Power
Stability (after 15-minute
warm-up)
Wave ID Transmit
Tone Generation
OTDR (Full Auto, Expert, Real-Time), Auto Test,
OPM, OLS, VFL, DFS
SR-4731 (GR-196-CORE Appendix A, B; SR-4731)
Downloadable from unit directly to PC
Laser
Class II FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
650 nm ±20 nm
0.8 mW
Multimode port SINGLE-MODE port
850/1300 nm
1310/1550 nm
Data Storage Capacity
Internal >1000 fibers
Data Transfer to PC
USB
Tool Free Adapters
Modular cleanable SC/ST/LC
Size
27.4 x 19.3 x 7.1 cm
(10.8 x 7.6 x 2.8 in)
2.3 kg ( 5 lb)
-10°C to +50°C, 0 to 90 % RH (non-condensing)
-20°C to +60°C, 0 to 90 % RH (non-condensing)
Rechargeable Li-Ion or AC power adapter
>8 hours continuous testing
Weight
Operating Temperature
Storage Temperature
Power
Battery Life k, m
Recharge Time l, m
Display
LED
Laser
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
0 dBm, 9 µm SM
>-20 dBm, 62.5 µm MM g
±0.1 dB over 1 hour
Yes
Yes
Yes (to -47 dBm)
USB flash drive (2.0)
Visual Fault Locator
Emitter Type
Safety Class
dB, dBm, mW
Yes (to -47 dBm)
Length Measurement Range 5 km (MM);
200 km (SM)
Data Storage
Internal flash memory
±(1 + 0.005 % x distance + data point spacing)
Loss Threshold
850, 1300 1310, 1490, 1550, 1625 nm
InGaAs 2 mm
+6 to -60 dBm
±0.25
4 hours
16.51 cm (6.5 in),
color, transflective
±0.07 dB over 1 hour
±0.15 dB over 8 hours
Yes
270 Hz, 330 Hz, 1 kHz, 2 kHz
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Typical distance between the two points 1.5 dB down each side of a reflective
spike caused by a -45 dB event using 10 ns pulse width.
c. Typical distance from event location to point where trace is within 0.5 dB of
backscatter caused by a -45 dB event using 10 ns pulse width.
d. Does not include GIR uncertainty.
e.Typical.
f. For a non-saturated event.
g. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped
jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
h. Accuracy measured at -10 dBm per N.I.S.T. standards.
j. Automatic wavelength identification and switching when used with NOYES
Wave ID Series Light Sources.
k. Typical, depending on display brightness.
l. Typical, from fully discharged to fully charged state, unit may be operating.
m. External battery charger available.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
19
© 2009-2011, AFL, all rights reserved. C850-00-2000 Revision 1E, 2011-06-22
Specifications are subject to change without notice.
C850 Compact QUAD OTDR with QUAD OLS and OPM
The C850 OTDR kits and options allow users to buy the test
equipment functionality needed today and grow to meet the
demands of certification testing.
The C850 combined with an OLS optical light source will allow
users to test and generate detailed reports with both OTDR and
Loss results shown for each fiber and in charts by cable.
Users can add a C840 or another C850 to perform Certification
testing. Two C850s or a C840 Tester and C850 can be used
together to perform Tier 1 dual wavelength MM (850/1300 nm)
and SM (1310/1550 nm) auto tests of one or two fibers
in one or both directions as well as measure both loss and
length of the fibers and compare to industry standards
(TIA/ISO/EN), applications and user-defined threshold values
to certify the fibers.
The C850 OTDR and C840 Certification Tester work with the
DFS1 Digital FiberScope.
Ordering Information
When placing an order, select options as follows: Model, Optical Configuration, Language, and Case.
Example: C850 — 100 — LP1 — H2
C850
NNN
LLL
CC
Case (CC)
S1 = Soft case
H1 = Hard case and soft case with cleaning
accessories
Model
C850
Optical Configuration (NNN)
100 = QUAD 850/1300 nm MM and 1310/1550 nm SM
Language (LLL)
LP1 = Language: English
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
20
© 2009-2011, AFL, all rights reserved. C850-00-2000 Revision 1E, 2011-06-22
Specifications are subject to change without notice.
C850 Compact QUAD OTDR with QUAD OLS and OPM
Ordering Information (continued)
Each C850 kit includes the C850 QUAD OTDR with integrated OLS, OPM, VFI, USB Flash drive, PC software for OTDR trace analysis and
certification or OPM loss reporting, AC adapter, switchable test ports adapters and accessories (see table below). The C850 hard carry
case kit has room for up to 6 Fiber Rings, jumpers in a jumper carry case, and the DFS1 Digital FiberScope kit (accessory items must be
ordered separately).
carry Case and Accessories
Cleaning Products
Soft case
One-Click Cleaner SC/ST/FC, 2.5 mm
Soft and hard cases
One-Click Cleaner SC/ST/FC, 2.5 mm
One-Click Cleaner LC, 1.25 mm
Cletop - SB white tape
C850—100—LP1—H1 Kit Contents
Item
Description
C850
QUAD OTDR/Auto Test Certification Tester
Adapters
OTDR and OLS ports — SC, ST, LC
OPM port — SC, 1.25 and 2.5 mm Universal
VFI port — 1.25 and 2.5 mm Universal
Miscellaneous
Accessories
Mandrel — 62.5 µm, 3 mm jacket and 50 µm, 3 mm jacket
Stylus pen for touch screen
USB thumb drive, 1G; USB to mini-USB cable
AC adapter (1), specify country of use
One-Click Cleaner SC/ST/FC, 2.5 mm
One-Click Cleaner LC/MU, 1.25 mm
Cletop SB white tape
Cases
OPM
SC, 2.5 mm, 1.25 mm
AFL NO.
VFI
2.5 mm 1.25 mm C850-100-LP1-S1
SC, ST, LC
SC, 2.5 mm, 1.25 mm
2.5 mm 1.25 mm C850-100-LP1-H1
OTDR, Inspection, and Cleaning Accessories
Small plastic parts box (2) to store adapter caps and mandrels
Cleaning
Accessories
Adapters
OTDR/OLS
SC, ST, LC
Hard transit case — holds C850, and above accessories
Soft case for C850
Report Software PC software
Description
DFS1 Digital FiberScope PC/UPC Inspection Kit
DFS1 Digital FiberScope APC Inspection Kit
DFS1 USB Digital Fiber Inspection Kit without Adapters
Fiber Ring, 1 fiber, 50/125 µm multimode, 150 m
Fiber Ring, 1 fiber, Laser Optimized, 50 µm multimode,
150 m
Fiber Ring, 1 fiber, 62.5/125 mm multimode, 150 m
AFL NO.
DFS1-00-04XU
DFS1-00-04XA
DFS1-00-04XN
FR1-M5-150-x1-x2 a
FR1-L5-150-x1-x2 a
Fiber Ring, 1 fiber, single-mode, 150 m
Wet Cleaning Kit (shown) for SC/FC/ST/LC connectors
Dry Cleaning Kit
One-Click Cleaner SC, ST, FC (500+ cleans)
One-Click Cleaner LC/MU (500+ cleans)
One-Click Mini-100 SC, ST, FC (100+ cleans)
One-Click Mini-100 LC/MU (100+ cleans)
One-Click Cleaner Ultra 2.5 SC, ST, FC (enlarged cleaning)
Zippered Jumper Carry Case
FR1-SM-150-y1-y2 a
8500-20-0900
8500-20-0901
8500-05-0001MZ
8500-05-0002MZ
8500-05-0005MZ
8500-05-0006MZ
8500-05-0007MZ
1400-01-0086PZ
FR1-M6-150-x1-x2 a
Notes:
a. When ordering Fiber Rings, specify connector types (x1, x2, y1,y2).
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
21
© 2009-2011, AFL, all rights reserved. C850-00-2000 Revision 1E, 2011-06-22
Specifications are subject to change without notice.
OFL250-50 Hand-held,
Fault-Locating OTDR
The NOYES OFL250-50 is a 1550 nm single-mode OTDR
with an integrated optical power meter (OPM), 1550 nm
laser source (OLS), and visual fault locator (VFL) in a hand-held
package weighing only 0.8 kg (1.8 lb). With short dead zone
and mid-range dynamic range performance, the OFL250-50
is ideal for troubleshooting dark single-mode fibers in local
access, metro area and FTTx networks.
The OFL250-50 provides automatic and manual setup, precision
event analysis, 12-hour battery life, internal data storage and
USB connectivity. OTDR and OPM test ports are equipped with
tool-free adapters, which can be changed in seconds.
OTDR test results are saved as industry standard .SOR files,
which can be transferred to a PC for viewing, printing, and
analyzing with the supplied Windows® compatible software.
Applications
•• Locate cable cuts, open or high-loss splices, fiber bends
and high-loss/high-reflectance connections
•• Measure optical power and loss (OPM port)
•• Short-range fault-location (VFL port)
•• Trace fibers and measure end-to-end loss at 1550 nm (working
with a NOYES optical power meter or light source)
•• Identify fibers (working with a NOYES optical fiber identifier)
Features
•• Rugged, hand-held and light weight
•• 1.5 m event dead zone
•• 26 dB dynamic range
•• Integrated OPM, OLS, VFL
•• Tool-free, interchangeable adapters for OTDR and OPM ports
•• Internal storage (>1000 OTDR traces in standard .SOR format)
•• High-contrast display is clear and bright in any lighting
condition, including direct sunlight
•• Transfer test results to a PC via USB
•• Rechargeable 12-hour Li-Ion battery or AC power
•• Windows® compatible software to view, print
and archive test records
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
22
© 2010-2011, AFL, all rights reserved. OFL2-50-2000 Revision 1B, 2011-07-14
Specifications are subject to change without notice.
OFL250-50 Hand-held, Fault-Locating OTDR
Specifications
a
Optical Light Source
OTDR
Emitter Type
Laser
Safety Class
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Fiber Type
Center Wavelength
Wavelength Tolerance
Dynamic Range (SNR=1)
Event Dead Zone b
Attenuation Dead Zone c
Pulse Widths
Range Settings
Data Points
Data Point Spacing
Group Index of Refraction
(GIR)
Distance Uncertainty (m)
Trace File Format
Trace File Storage Medium
Data Transfer to PC
OTDR Modes
Emitter Type
Fiber Type
Center Wavelength
Wavelength Tolerance
Spectral Width (FWHM)
Internal Modulation
Output Power Stability
Output Power (nominal)
Single-mode
1550 nm
±20 nm
26 dB
1.5 m
7m
5, 10, 30, 100, 300 ns, 1, 3, 10 µs
250 m to 256 km
Up to 16,000
12.5 cm (range <4 km),
Range/16,000 (range >4 km)
Visual Fault Locator
Emitter Type
Safety Class
Wavelength
Output Power (nominal)
1.4000 to 1.6000
±(1 + 0.005 % x distance + data point spacing)
Bellcore GR-196 V.1.1
Internal memory (>1000 traces)
USB cable
Full Auto, End Locate, Expert, Live
Optical Power Meter
Calibrated Wavelengths
1310, 1490, 1550, 1625 nm
Detector Type
Measurement Range
Tone Detect Range
Wavelength ID range
Accuracy
Resolution
Measurement Units
Filtered InGaAs
+23 to - 45 dBm
+3 to -35 dBm
+3 to -35 dBm
±0.25 dB
0.01 dB
dB, dBm, nW, µW, mW
General
Size (in boot)
Weight
Operational Temperature
Storage Temperature
Power
Battery Life
Display
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Single-mode
1550 nm
±20 nm
5 nm (max)
1 kHz, 2 kHz
<±0.25 dB after 15 min
–3 dBm
Visible red laser
Class II FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
650 nm ±20 nm
0.8 mW into single-mode fiber
20.1 x 13.0 x 5.3 cm (7.9 x 5.1 x 2.1 in)
0.8 kg (1.8 lb)
-10°C to +50°C,
0 to 95 % RH (non-condensing)
-20°C to +60°C,
0 to 95 % RH (non-condensing)
Rechargeable Li-Ion or AC adapter
12 hours, backlight ON, continuous operation
LCD, 320 x 240, 3.5 inch (89 mm), color, highperformance transflective with backlight and
AR coating
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Typical distance between the two points 1.5 dB down each side of a reflective spike caused by a -45 dB event using 5 ns pulse width.
c. Typical distance from event location to point where trace is within 0.5 dB of backscatter at 5 ns pulse width.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
23
© 2010-2011, AFL, all rights reserved. OFL2-50-2000 Revision 1B, 2011-07-14
Specifications are subject to change without notice.
OFL250-50 Hand-held, Fault-Locating OTDR
Ordering Information
The OFL250-50 OTDR comes with a carry case, (1) SC and (1) FC adapter for the OTDR/
OLS port, 2.5 mm adapter for the OPM and VFL ports, One-Click Cleaner SC/FC/ST (2.5
mm), USB cable (connects with Type A USB port on your PC), and AC power adapter
with country-specific power cord.
Description
1550 nm, single-mode OTDR
AFL NO.
OFL250-50U-ENG
Available Accessories
Description
AFL NO.
FC adapter, OTDR/OLS port
2900-50-0002MR
SC adapter, OTDR/OLS port
2900-50-0003MR
ST adapter, OTDR/OLS port
2900-50-0004MR
LC adapter, OTDR/OLS port
2900-50-0006MR
FC adapter, OPM port
2900-52-0001MR
SC adapter, OPM port
2900-52-0002MR
ST adapter, OPM port
2900-52-0003MR
LC adapter, OPM port
2900-52-0004MR
2.5 mm adapter, OPM port
2900-52-0005MR
1.25 mm adapter, OPM port
2.5 mm adapter, VFL port
1.25 mm adapter, VFL port
Dust cap for UCI outputs
Fiber Ring, SM, 150 m
Soft carry case
Extended Warranty and pre-paid annual calibration plans available for
1, 2, and 4 years (contact factory).
2900-52-0006MR
2900-53-0001MR
2900-53-0002MR
8800-00-0072PR
FR1-SM-150-y1-y2 a
1400-01-0045
EWxY-xx-xxxx
a. When ordering Fiber Rings, specify connector types (y1,y2); 500 and 1000 m lengths also available.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
24
© 2010-2011, AFL, all rights reserved. OFL2-50-2000 Revision 1B, 2011-07-14
Specifications are subject to change without notice.
OTDR Fiber Rings
Measuring an insertion loss of the near-end and/or far-end connection of a fiber optic
link with an OTDR requires a launch and/or receive test cable. A launch cable, which
connects the OTDR to the link under test, reveals the insertion loss and reflectance of
the near-end connection. A receive cable, which connects to the far-end of the link,
reveals the insertion loss and reflectance of the far-end connection. Launch and receive
test cables can range from 150 m to 1 km (or longer) in length. Because very long test
cables are impractical to transport and use, the OTDR offers coiled lengths of 50 mm
multimode, 62.5 mm multimode, or single-mode fiber packaged in compact rings.
Fiber Ring, MM - 150 m
Fiber Rings of 150 m of fiber are ideal for premises fiber network test applications.
Fiber Rings of 500 m and 1 km of single-mode fiber are designed for broadband,
long-haul fiber network test applications.
Fiber Ring Models
Fiber Ring, SM - 1000 m
Configuration
Fiber Type
Fiber Length
AFL NO.
Standard, one fiber
Standard, one fiber, Laser Optimized
Multimode, 50 mm
Multimode, 50 mm
150 m (492 ft)
150 m (492 ft)
FR1-M5-150- x1- x2
FR1-L5-150-x1-x2
Standard, one fiber
Standard, one fiber
Standard, one fiber
Standard, one fiber
MT-RJ near-end, A and B fibers
MT-RJ near-end, A and B fibers
MT-RJ near-end, A and B fibers
E2000 to ST, SC, FC, etc., one fiber
E2000 to ST, SC, FC, etc., one fiber
E2000 to ST, SC, FC, etc., one fiber
E2000 to E2000, one fiber
E2000 to E2000, one fiber
E2000 to E2000, one fiber
Multimode, 62.5 mm
Single-mode
Single-mode
Single-mode
Multimode, 50 mm
Multimode, 62.5 mm
Single-mode
Multimode, 50 mm
Multimode, 62.5 mm
Single-mode
Multimode, 50 mm
Multimode, 62.5 mm
Single-mode
150 m (492 ft)
150 m (492 ft)
500 m (1640 ft)
1000 m (3280 ft)
150 m (492 ft)
150 m (492 ft)
150 m (492 ft)
150 m (492 ft)
150 m (492 ft)
150 m (492 ft)
150 m (492 ft)
150 m (492 ft)
150 m (492 ft)
FR1-M6-150- x1- x2
FR1-SM-150- y1- y2
FR1-SM-500- y1- y2
FR1-SM-1000- y1- y2
FR3-M5-x1-MTRJ
FR3-M6-x1-MTRJ
FR3-SM-x1-MTRJ
FR1-M5-x1-E2000
FR1-M6-x1-E2000
FR1-SM-y1-E2000
FR1-M5-E2000-E2000
FR1-M6-E2000-E2000
FR1-SM-E2000-E2000
x1, x2 — connectors for multimode cables, specify type [ST, SC, ASC (angled SC), FC, AFC (angled FC), LC]
y1, y2 — connectors for single-mode cables, specify type [ST, SC, ASC (angled SC), FC, AFC (angled FC), LC]
Other connector types, fiber types, and fiber lengths will be quoted upon request.
Fiber Ring, Laser Optimized
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
25
© 2008-2011, AFL, all rights reserved. FR00-00-2000 Revision B, 2011-06-15
Specifications are subject to change without notice.
OTDR Fiber Rings
How to Generate a Baseline Trace Using Fiber Rings
•• Use the Fiber Ring as a launch cable.
Connect the Fiber Ring between your OTDR and the fiber link under test. This will allow
you to measure the loss of the near-end connection.
•• Use the Fiber Ring as a receive cable.
Connect the Fiber Ring to the far-end connector of your fiber link under test. This will
allow you measure the loss of the far-end connection.
•• By using Fiber Rings as both launch and receive cables, as shown in the diagram below,
you can measure total insertion loss of the fiber link under test.
fiber ring - launch cable
2
6
7
fiber link under test
fiber ring - receive cable
fiber ring connector
1
4
OTDR port
fusion splice
OTDR
3
5
near-end connection
far-end connection
8
end of receive cable
Example OTDR Test Configuration with Launch and Receive Cables
OTDR port
1
8
end of receive cable
near-end connection
3
6
fiber link under test
fiber ring - launch cable
2
5
far-end connection
fusion splice
4
7
fiber ring receive cable
OTDR Trace Made using Launch and Receive Cables
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
26
© 2008-2011, AFL, all rights reserved. FR00-00-2000 Revision B, 2011-06-15
Specifications are subject to change without notice.
FTK Pro Installer Kit
The NOYES FTK Pro Installer Kit from AFL provides a wide
selection of fiber optic testing, cleaning and inspection
equipment to enable technicians to install and maintain fiber
optic networks. Available with multimode and single-mode test
equipment, the kit also includes a broad array of cleaning and
inspection equipment in a convenient tough injection-molded
ABS carrying case. The Pro Installer Kit is ideal for TIA Tier 1 and
Tier 2 testing of premises (building and campus) networks or
certification and troubleshooting of FTTx PON networks.
Kit Contents
Item
M200
OPM5-2D
OLS4
OFS300-200
Features
•• Clean, inspect, and test fiber optic networks
•• Multimode and single-mode fiber ready
•• Verify integrity of installed fiber networks
•• Software to present network owners with written
proof of a quality installation
•• Convenient rugged hard carry case
Fiber Rings
(1 each)
Applications
•• Tier 1 and Tier 2 testing of premise networks
•• FTTx PON certification and troubleshooting
•• Fast fault location
•• Splice verification
•• Network documentation
Adapters
Jumpers,
2 meters in
length (2 each)
Ordering Information
Description
AFL No.
See Kit Contents Table
FTK1-01-0900PR
Description
QUAD OTDR, 850/1300 nm MM, 1310/1550 nm SM
Optical Power Meter (Wave ID, Set Reference, Data Storage)
Optical Light Source (LED and Laser)
Optical Fiber Scope (200x)
FR1-L5-150-SC-ST
(50/125 Laser Optimized)
FR1-L5-150-SC-LC
(50/125 Laser Optimized)
FR1-L5-150-ST-LC
(50/125 Laser Optimized)
FR1-M6-150-SC-ST(62.5/125)
FR1-M6-150-SC-LC(62.5/125)
FR1-M6-150-ST-LC(62.5/125)
FR1-SM-150-SC-ST(SM)
FR1-SM-150-SC-LC(SM)
FR1-SM-150-ST-LC(SM)
SC, ST, LC for the OTDR/OLS ports (2 each)
SC, ST, LC for the OPM Unit
2.5 mm and 1.25 mm Universal for OFS and for VFL on OTDR
SC-ST
(50/125 Laser Optimized)
SC-LC
(50/125 Laser Optimized)
SC-ST(62.5/125)
SC-LC(62.5/125)
SC-ST(SM)
SC-LC(SM)
Bulkheads
SC/SC, ST/ST, LC/LC
(mating adapters)
FiberWipes™ Mini-tub
Cletop -SB with white tape
Cletop replacement tape (white)
FCC2 Fiber Connector Cleaner
Cleaning Supplies
Connector Cleaning Tips (for cleaning in sockets):
2.5 mm and 1.25 mm
One-Click Cleaner SC/ST/FC
NOYES International Sales and Service
Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
Miscellaneous
Accessories
Report Software
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
27
One-Click Cleaner LC/MU
(2) Mandrels: 62.5 µm, 3 mm jacket and 50 µm, 3 mm jacket
Stylus pen for the M200 touch screen
USB flash drive, 1G
Plastic parts boxes to hold adapters (Qty 3)
Case to hold up to 12 jumpers (2 - 5 meters in length)
Windows® compatible software and user guide
© 2009-2011, AFL, all rights reserved. FTK1-01-2000 Revision 1E, 2011-08-01
Specifications are subject to change without notice.
C860 QUAD OTDR and Certification Test Kit
The NOYES C860 QUAD Certification and OTDR Test Kit from AFL
includes one hand-held C840 QUAD OLTS Tester and one C850
QUAD OTDR/OLTS with built-in auto test functionality. With this
kit, technicians can troubleshoot and perform both Tier 1 and
Tier 2 certification tests of MM and SM fiber networks, store
results and create professional test reports.
The C850 is both a QUAD Certification Tester and full-featured
QUAD OTDR in a compact case with a large transflective touch
screen display suitable for both indoor and outdoor operation.
The C850 features single-mode and multimode OTDR, Optical
Light Sources (OLS), Visual Fault Locator (VFL, 650 nm), and an
Optical Power Meter (OPM). As an OTDR, the C850 supports Full
Auto, Expert (manual) and Real-Time test modes, simultaneous
dual and single wavelength testing, and Event and Pass/Fail
analysis based on default or user-defined thresholds. The C840
QUAD Certification Tester includes VFL, OPM, and both singlemode (1310/1550 nm) and multimode (850/1300 nm) OLS. The
C840 may be used alone as a traditional power meter or light
source to measure fiber loss or as a visual fault locator to find
fiber breaks.
The C860 kit combines ease of use (Touch and Test™) with
multiple functionality and supports visual inspection per IEC
61300-3-35 using the DFS1 Digital FiberScope allowing users
the ability to view and document connector end-face images
with their OTDR traces and loss results.
C860 with DFS1 Digital FiberScope
Features
•• OTDR dynamic range: 22 dB (MM); 26 dB (SM)
•• Inspection capable with the DFS1 Digital FiberScope
•• Integrated OPM, OLS, and VFL (650 nm)
•• OLS sources: LED - 850/1300 nm; Laser - 1310/1550 nm
•• Full Auto, Expert, Real-Time OTDR test modes
•• >8 hours battery life or AC power
•• Touch and Test™ user interface
•• TRM™ reporting software
•• Automatic Pass/Fail analysis (TIA/ISO/EN)
•• Bellcore (GR-196) .SOR file format
•• Internal (1000s tests) and USB storage
•• Wave ID detect if used with NOYES Wave ID series light sources
•• USB host and function ports
Thousands of test results may be stored internally or on the
supplied USB drive. Test results are transferable via a USB cable
or USB drive to a computer for viewing, printing, and analyzing
with the supplied Windows® compatible software - TRM™ (Test
Results Manager). Acceptance reports generated using TRM can
include OTDR traces with summary and event information with or
without Pass/Fail indication, Event maps, and end-face images.
Applications
•• Tier 1 and Tier 2 testing of premise networks
•• Bi-directionally measure loss and length of fiber links
•• Perform Pass/Fail Event and Link measurements using OTDR
•• Measure loss and length of fiber links
•• Certify SM and MM fibers using Pass/Fail criteria of industry
standards, applications and user-defined thresholds
•• Create professional certification reports
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
28
© 2008-2011, AFL, all rights reserved. C860-00-2000 Revision 1G, 2011-06-22
Specifications are subject to change without notice.
C860 QUAD OTDR and Certification Test Kit
Specifications
a
OTDR
Emitter Type
Safety Class
Center Wavelengths
Wavelength Tolerance
Dynamic Range (SNR = 1)
Event Dead Zone b
Attenuation Dead Zone c
Pulse Widths
Range Settings
Sampling Points
Minimum Data Point Spacing
Group Index of Refraction
(GIR)
Distance Uncertainty (m) d
Linearity e
Multimode
Single-mode
Power Meter
Laser
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
850/1300 nm
1310/1550 nm
±20/30 nm
±20/30 nm
22 dB
26 dB
1.5 m
9m
10, 30, 100, 300 ns; 1, 3, 10 µs
250 m to 64 km
250 m to 208 km
Calibrated Wavelengths
Detector Type
Measurement Range
Accuracy h
Measurement Units
Wavelength ID j
Set Reference
Data Storage
Tone Detection
Up to 16,000
0.25 m
1.4000 to 1.6000
general
Test Modes
±(1 + 0.005 % x distance + data point spacing)
Trace File Format
±0.05 dB/dB
Loss Threshold
0.05 dB
Length Measurement Range
Loss Resolution
0.01 dB
Data Storage
Reflectance Accuracy f
±2 dB
Wavelength
Output Power (nominal)
Light Source
Available Wavelengths (nom.)
Emitter Type
Safety Class
Output Power
Stability (after 15-minute
warm-up)
Wave ID Transmit
Tone Generation
C850 OTDR
C840 Tester
OTDR (Full Auto, Expert,
Auto Test,
Real-Time), Auto Test,
OPM, OLS, VFL, DFS
OPM, OLS, VFL, DFS
SR-4731 (GR-196-CORE
N/A
Appendix A, B; SR-4731)
5 km (MM); 200 km (SM)
Internal flash memory
USB flash drive (2.0)
Downloadable from unit directly to PC
Visual Fault Locator
Emitter Type
Safety Class
850, 1300 1310, 1490, 1550, 1625 nm
InGaAs 2 mm
+6 to -60 dBm
±0.25
dB, dBm, mW
Yes (to -47 dBm)
Yes
Yes
Yes (to -47 dBm)
Data Storage Capacity
Laser
Class II FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
650 ±20 nm
0.8 mW
USB
Tool Free Adapters
Modular cleanable SC/ST/LC
Size
Weight
Operating Temperature
Storage Temperature
Power
Battery Life k, m
MULTIMODE port
SINGLE-MODE port
850/1300 nm
1310/1550 nm
LED
Laser
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
>-20 dBm, 62.5 µm MM g
0 dBm, 9 µm SM
±0.1 dB over 1 hour
±0.07 dB over 1 hour
±0.15 dB over 8 hours
Yes
270 Hz, 330 Hz, 1 KHz, 2 kHz
Recharge Time l, m
Display
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Typical distance between the two points 1.5 dB down each side of a reflective
spike caused by a -45 dB event using 10 ns pulse width.
c. Typical distance from event location to point where trace is within 0.5 dB of
backscatter caused by a -45 dB event using 10 ns pulse width.
d. Does not include GIR uncertainty.
e.Typical.
f. For a non-saturated event.
Internal >1000 fibers
Data Transfer to PC
27.4 x 19.3 x 7.1 cm
23 x 11 x 7 cm
(10.8 x 7.6 x 2.8 in)
(8.8 x 4.3 x 2.8 in)
2.3 kg ( 5 lb)
0.9 kg (2 lb)
-10°C to +50°C, 0 to 90 % RH (non-condensing)
-20°C to +60°C, 0 to 90 % RH (non-condensing)
Rechargeable Li-Ion or AC power adapter
>8 hours continuous testing
4 hours
16.51 cm (6.5 in),
color, transflective
9.65 cm (3.8 in),
color, transflective
g. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped
jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
h. Accuracy measured at 25 ºC and -10 dBm per N.I.S.T. standards.
j. Automatic wavelength identification and switching when used with NOYES
Wave ID Series Light Sources.
k. Typical, depending on display brightness.
l. Typical, from fully discharged to fully charged state, unit may be operating.
m. External battery charger available.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
29
© 2008-2011, AFL, all rights reserved. C860-00-2000 Revision 1G, 2011-06-22
Specifications are subject to change without notice.
C860 QUAD OTDR and
Certification Test Kit
The C840 and C850 can be used together to perform Tier 1
dual wavelength MM (850/1300 nm) and SM (1310/1550 nm)
auto loss tests of one or two fibers in one or both directions as
well as measure both loss and length of the fibers and compare
to industry standards (TIA/ISO/EN), applications and userdefined thresholds values to certify the fibers. Either unit can be
identified as the Main or Remote.
The user can test two fibers at two wavelengths bi-directionally
and store the results into the main unit. Featuring rich file
naming, the Job setup wizard allows the user to define both the
cable and fiber end locations, creating easily identifiable trace
files, which are managed into Job and Cable folders.
The C850 OTDR and C840 Certification tester work with the
DFS1 Digital FiberScope.
Ordering Information
When placing an order, select options as follows: Model, Optical Configuration, Language and Case.
Example: C860 — 100 — LP1 — H1
C860
NNN
LLL
CC
Case (CC)
H1 = Hard and soft case with SC-LC
cleaning accessories
Model
C860
Optical Configuration (NNN)
100 = QUAD 850/1300 nm MM and 1310/1550 nm SM
Language (LLL)
LP1 = Language: English
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
30
© 2008-2011, AFL, all rights reserved. C860-00-2000 Revision 1G, 2011-06-22
Specifications are subject to change without notice.
C860 QUAD OTDR and Certification Test Kit
Ordering Information (cont.)
Each kit includes one compact C850 QUAD OTDR/OLTS, one hand-held C840 QUAD Certification Tester, USB flash drive, PC software
for OTDR trace analysis and certification or OPM loss reporting, (2) AC adapters, switchable test ports adapters, and accessories
(see below). The C860 hard carry case kit has room for up to six Fiber Rings, jumpers in a jumper carry case, and the DFS1 Digital
FiberScope kit (accessory items must be ordered separately).
carry Case
Adapters
Soft and hard cases
OTDR/OLS
OPM
VFI
SC, ST, LC
SC, 2.5, 1.25 mm
2.5, 1.25 mm
C860—100—LP1—H1
Cleaning Products
AFL NO.
One-Click Cleaner SC/ST/FC, 2.5 mm
One-Click Cleaner LC, 1.25 mm
Cletop - SB white tape
C860-100-LP1-H1
OTDR, Inspection and Cleaning Accessories
Item
Description
C850
QUAD OTDR/Auto Test Certification Tester
C840
QUAD Auto Test Certification Tester
Adapters
OTDR and OLS ports — SC, ST, LC
OPM ports — SC, 1.25 and 2.5 mm Universal
VFI ports — 1.25 and 2.5 mm Universal
Miscellaneous
Accessories
Mandrels (2) 62.5 µm, 3 mm jacket
and (2) 50 µm, 3 mm jacket
Stylus pens for touch screen. USB thumb drive, 1G.
USB to mini-USB cable
Small plastic parts box (2) to store adapter caps and mandrels
AC adapter (2), specify country of use
Cleaning
Accessories
Cases
(2) One-Click Cleaner SC/ST/FC, 2.5 mm; One-Click Cleaner
LC/MU, 1.25 mm (H2 kit only); Cletop SB white tape
Hard transit case — holds C850, C840, and above accessories
Soft case for C850
Report Software PC software and user guide
Description
DFS1 Digital FiberScope PC/UPC Inspection Kit
DFS1 Digital FiberScope APC Inspection Kit
DFS1 USB Digital Fiber Inspection Kit without Adapters
Fiber Ring, 1 fiber, 50/125 µm multimode, 150 m
Fiber Ring, 1 fiber, Laser Optimized, 50 µm multimode, 150 m
Fiber Ring, 1 fiber, 62.5/125 mm multimode, 150 m
AFL NO.
DFS1-00-04XU
DFS1-00-04XA
DFS1-00-04XN
FR1-M5-150-x1-x2 a
FR1-L5-150-x1-x2 a
FR1-M6-150-x1-x2 a
Fiber Ring, 1 fiber, single-mode, 150 m
Wet Cleaning Kit (shown) for SC/FC/ST/LC connectors
Dry Cleaning Kit
One-Click Cleaner SC, ST, FC (500+ cleans)
One-Click Cleaner LC/MU (500+ cleans)
One-Click Mini-100 SC, ST, FC (100+ cleans)
One-Click Mini-100 LC/MU (100+ cleans)
One-Click Cleaner Ultra 2.5 SC, ST, FC (enlarged cleaning)
Zippered Jumper Carry Case
FR1-SM-150-y1-y2 a
8500-20-0900
8500-20-0901
8500-05-0001MZ
8500-05-0002MZ
8500-05-0005MZ
8500-05-0006MZ
8500-05-0007MZ
1400-01-0086PZ
Notes:
a. When ordering Fiber Rings, specify connector types (x1, x2, y1,y2).
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
31
© 2008-2011, AFL, all rights reserved. C860-00-2000 Revision 1G, 2011-06-22
Specifications are subject to change without notice.
C880 QUAD Certification Test Kit
Combining two C840 Certification Testers, the NOYES C880
QUAD Certification Test Kit from AFL is designed for testing and
troubleshooting both multimode and single-mode fiber links.
Each tester includes an integrated Visual Fault Locator (VFL,
650 nm), both single-mode (Laser 1310/1550 nm) and
multimode (LED 850/1300 nm) Optical Light Sources (OLS), and
an Optical Power Meter (OPM). Each tester may be used alone as
a traditional power meter, light source, or visual fault locator.
In Auto Test mode, the user may perform certification tests to
one of the industry cabling standards (TIA, ISO, EN), one or
more application standards, or a user-defined loss/length limit.
Certification reports may be generated based on the selected
standards and rules using PC reporting software. The transflective
touch-screen display of the C840 tester is suitable for both
indoor and outdoor operation.
The C840 supports visual inspection per IEC 61300-3-35 using
the DFS1 Digital FiberScope allowing users the ability to view
and document connector end-face images.
Thousands of test results may be stored internally for transfer to
a computer via a USB cable or a standard USB drive for viewing,
printing, and analyzing with the supplied Windows® compatible
software - TRM™ (Test Results Manager). Acceptance reports
generated using TRM™ can include certification reports and endface images.
C860 with DFS1 Digital FiberScope
Features
•• Hand-held, 0.9 kg (2 lb)
•• Inspection capable with the DFS1 Digital FiberScope
•• Integrated OPM, OLS, and VFL (650 nm)
•• OLS sources: LED - 850/1300 nm; Laser - 1310/1550 nm
•• Dual-wavelength certification Pass/Fail
•• Two fibers bi-directional and single fiber testing
•• >8 hours battery life or AC power
•• Touch and Test™ user interface
•• TRM™ reporting software
•• Internal (1000s tests) and USB storage
•• USB host and function ports
Applications
•• Tier 1 testing of premise networks
•• Bi-directionally measure loss and length of fiber links
•• Save time simultaneously testing two fibers at two wavelengths
•• Verify polarity
•• Certify SM and MM networks to industry standards (ISO/TIA/EN)
and applications
•• Find faults using integrated Visual Fault Locator
•• Create and test to user defined rules
•• Review Pass/Fail feedback after each test
•• Review fibers by cable and retest fiber pairs if needed
•• Create professional certification reports
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
32
© 2008-2011, AFL, all rights reserved. C880-00-2000 Revision 1F, 2011-06-22
Specifications are subject to change without notice.
C880 QUAD Certification Test Kit
Ordering Information
Each C880 kit or C840 kit includes two (2) C840s or one (1) C840 Tester respectively, USB flash drive, PC software for OTDR trace
analysis and certification or OPM loss reporting, AC adapters (two (2) with C880 kit, one (1) with C840 kit), switchable test ports
adapters, and accessories (see table below).
carry Case
TEST CORDS a
Adapters
Cleaning Products
AFL NO.
SC, 2.5, 1.25 mm 2.5, 1.25 mm
One-Click Cleaner SC/ST/FC, 2.5 mm
One-Click Cleaner LC, 1.25 mm
C880-100-LP1-S1
OLS
OPM
SC, ST, LC
VFI
Soft case
SC/LC
Soft case
SC/ST
SC, ST, LC
SC, 2.5, 1.25 mm 2.5, 1.25 mm
One-Click Cleaner SC/ST/FC, 2.5 mm
C880-100-LP1-S2
—
SC, ST, LC
SC, 2.5, 1.25 mm 2.5, 1.25 mm
One-Click Cleaner SC/ST/FC, 2.5 mm
C840-100-LP1-S1
Soft case
Notes:
a. (4) each - 2 m (62.5µm, 50 µm, SM).
The C840 Certification Tester works with the DFS1 Digital FiberScope.
When placing an order, select options as follows: Model, Optical Configuration, Language, and Case.
Example: C880 — 100 — LP1 — S1
C880
NNN
LLL
Case (CC)
S1 = Soft case for C840 (two units) with SC-LC
test and cleaning accessories
S2 = Soft case for C840 (two units) with SC-ST
test and cleaning accessories
Model
C880
Optical Configuration (NNN)
100 = QUAD 850/1300 nm MM and 1310/1550 nm SM
Language (LLL)
LP1 = Language: English
C880—100—LP1—S1 (or S2) C880 Kit Contents
Item
C840
Adapters
Jumpers (12)
Miscellaneous
Accessories
Cleaning
Accessories
Cases
Report Software
CC
Inspection and Cleaning Accessories
DESCRIPTION
QUAD Auto Test Certification Tester (2 ea)
OLS Ports — SC, ST, LC
OPM port — SC, 1.25 and 2.5 mm Universal
VFI port — 1.25 and 2.5 mm Universal
2 m (62.5 mm, 50 mm, SM)
Mandrels (2) — 62.5 mm, 3 mm jacket
Mandrels (2) — 50 mm, 3 mm jacket
Stylus pens for touch screen
USB flash drive -1G, USB to mini-USB cable
AC adapters (2), specify country of use
(2) One-Click Cleaner SC/ST/FC, 2.5 mm (S1 and S2 kit)
One-Click Cleaner LC/MU, 1.25 mm (S1 kit only)
Soft case (2)
PC software and user guide
Description
DFS1 Digital FiberScope PC/UPC Inspection Kit
DFS1 Digital FiberScope APC Inspection Kit
DFS1 USB Digital Fiber Inspection Kit without Adapters
Wet Cleaning Kit (shown) for SC/FC/ST/LC connectors
Dry Cleaning Kit
One-Click Cleaner SC, ST, FC (500+ cleans)
One-Click Cleaner LC/MU (500+ cleans)
One-Click Mini-100 SC, ST, FC (100+ cleans)
One-Click Mini-100 LC/MU (100+ cleans)
One-Click Cleaner Ultra 2.5 SC, ST, FC (enlarged cleaning)
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
33
AFL NO.
DFS1-00-04XU
DFS1-00-04XA
DFS1-00-04XN
8500-20-0900
8500-20-0901
8500-05-0001MZ
8500-05-0002MZ
8500-05-0005MZ
8500-05-0006MZ
8500-05-0007MZ
© 2008-2011, AFL, all rights reserved. C880-00-2000 Revision 1F, 2011-06-22
Specifications are subject to change without notice.
C880 QUAD Certification Test Kit
Specifications
a
Power Meter
Auto Test Wavelengths
Detector Type
Measurement Range
Accuracy b
Measurement Units
Wavelength ID c
Set Reference
Data Storage
Tone Detection
Light Source
Available Wavelengths
Emitter Type
Safety Class
Output Power
General
850/1300 nm (MM), 1310/1550 nm (SM)
InGaAs 2 mm
+6 to -60 dBm
±0.25
Test Modes
Data Storage
Downloadable from unit directly to PC
Yes
Yes
Yes (to -47 dBm)
Multimode port
Single-mode port
850/1300 nm (nominal) 1310/1550 nm (nominal)
LED
Laser
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC EN60825-1: 2007-03
0 dBm, 9 µm SM
>-20 dBm, 62.5 µm MM d
±0.1 dB over 1 hour
Internal flash memory
USB flash drive (2.0)
dB, dBm, mW
Yes (to -47 dBm)
Stability (after 15minute warm-up)
Wave ID Transmit
Tone Generation
Auto Test, OPM, OLS, VFL, DFS
Length Measurement Range 5 km (MM); 200 km (SM)
Data Storage Capacity
Internal >1000 fibers
Data Transfer to PC
USB
Tool Free Adapters
Modular cleanable SC/ST/LC
Size
Weight
Operating Temperature
Storage Temperature
Power
23 x 11 x 7 cm (8.8 x 4.3 x 2.8 in)
0.9 kg (2 lb)
-10°C to +50°C, 0 to 90 % RH (non-condensing)
-20°C to +60°C, 0 to 90 % RH (non-condensing)
Rechargeable Li-Ion or AC power adapter
>8 hours continuous testing
Battery Life e, g
Recharge Time f, g
Display
4 hours
9.65 cm (3.8 in), color, transflective
±0.07 dB over 1 hour
±0.15 dB over 8 hours
Yes
270 Hz, 330 Hz, 1 KHz, 2 kHz
Visual Fault Locator
Emitter Type
Safety Class
Laser
Class II FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
Wavelength
650 ±20 nm
Output Power (nominal) 0.8 mW
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at -10 dBm per N.I.S.T. standards.
c. Automatic wavelength identification and switching when used with NOYES Wave ID Series Light Sources.
d. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
e. Typical, depending on display brightness.
f. Typical, from fully discharged to fully charged state, unit may be operating.
g. External battery charger available.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
34
© 2008-2011, AFL, all rights reserved. C880-00-2000 Revision 1F, 2011-06-22
Specifications are subject to change without notice.
OLTS 5 Optical Loss Test Set
The OLTS 5 Optical Loss Test Set series offers end-to-end single-mode testing at either
1310/1550 nm or 1550/1625 nm. The OLTS 5 may be operated in automatic or manual
test modes. In its “two-unit” automatic test mode, a pair of OLTS 5 test sets may be
used to measure the end-to-end, bi-directional insertion loss of a pair of single-mode
fibers at 1310/1550 nm or 1550/1625 nm. Tests are started and controlled by the user
from the OLTS 5 configured as the Main unit. Test progress messages and results are
displayed on the Remote unit. Full test results can be reviewed and saved in the Main
unit. Thresholds may be set to provide Pass/Fail results. In its “single-unit” automatic
test mode the OLTS 5 can measure bi-directional, dual-wavelength insertion loss of
patch cords, or fiber optic cables while they are still on the reel. In the manual operating
mode individual OLTS 5 test sets can operate either as an optical power meter (OPM)
or dual-wavelength laser source.
The OLTS 5 can store dual-wavelength, bi-directional insertion loss results for up
to 1,000 fibers. Test results can be organized in up to 20 user-named files.
Windows® compatible software is provided to view, edit, and print test results.
OLTS 5 units are sold individually but normally used in pairs.
Features
•• Tier 1 certification to industry standards
•• ISO/TIA/EN/User setable Pass/Fail thresholds
•• Touch and Test™ user interface
•• TRM™ reporting software
•• Inspection capable
Applications
•• Certification of multimode and single-mode fiber networks
•• Testing and Troubleshooting
•• Document Tier 1 results in a professional report
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
35
© 2002-2011, AFL, all rights reserved. OLT5-00-2000 Revision G, 2011-07-29
Specifications are subject to change without notice.
OLTS 5 Optical Loss Test Set
Specifications
a
Model
OLTS 5-3
Transmit port (laser source) specifications
1310/1550 ±20 nm
Center Wavelengths
Emitter Type
OLTS 5-5
OLTS 5-6
1550/1625 ±20 nm
1310/1550 ±20 nm
Laser, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Output Power into 9/125 SM fiber
-5 dBm (nominal)
-5 dBm (nominal)
-5 dBm (nominal)
Stability
±0.1 dB, up to 8 hours
±0.1 dB, up to 8 hours
±0.1 dB, up to 8 hours
Insertion Loss and Power Measurement Resolution 0.01 dB
SC, FC, ST
Available Connector Types
Receive port (optical power measurement) specifications
InGaAs
Detector Type
Calibrated Wavelengths
0.01 dB
0.01 dB
SC, FC, ST
SC, FC, ST
InGaAs
Filtered InGaAs
OPM (manual) Mode Optical Power Display Range
OLTS (automatic) Mode Insertion Loss
Measurement Range
850, 980, 1300, 1310, 1480, 1550, 1625 nm
+ 0 to –70 dBm
+10 to –70 dBm
+16 to –60 dBm
45 dB
45 dB
39 dB
Accuracy at –10 dBm, 25ºC
±0.25 dB
±0.25 dB
±0.25 dB
General specifications
Display
128 X 64 dot matrix liquid crystal display
Dimensions (H x W x D)
18.5 X 11.1 X 4.6 cm (7.3 X 4.4 X 1.8 in)
Weight
0.55 kg (1.2 lb)
Operating Temperature and Humidity
0°C to +50°C, 90 % RH (non-condensing)
Storage Temperature and Humidity
-20°C to +60°C, 95 % RH
Power
2 AA (2-cell NiMH or AC optional)
Battery Life (typical)
2 AA - 17 hours; NiMH battery pack - 11 hours
Connector Types
Thread-on adapter cap mount
Note:
a. All specifications valid at 25°C unless otherwise specified.
Ordering Information
Includes
(1) OLTS 5, (2) AA alkaline batteries, protective rubber boot, PC software, adapter cap of the same connector type as the transmit port, and carry case.
afl no.
All OLTS 5 models
When ordering, connector type after the model number, for example OLTS 5-3 SC.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
36
© 2002-2011, AFL, all rights reserved. OLT5-00-2000 Revision G, 2011-07-29
Specifications are subject to change without notice.
OPM4-FTTx PON Power Meter
The NOYES OPM4-FTTx from AFL is designed to measure optical power in FTTH
and other passive optical networks (PONs) that use 1490 nm for downstream data
and 1550 nm for downstream video traffic. In addition, the OPM4-FTTx provides an
integrated Visual Fault Locator (VFL) - 650 nm (red) laser for short-range fault location
and connectivity testing.
Equipped with wavelength filters and a dual photo detector, the OPM4-FTTx can
separately and simultaneously measure 1490 and 1550 nm power at the ONT or other
points in an FTTx PON. A large, dual-wavelength LCD display with backlight shows
power at both wavelengths in units of dBm or µW. The “set reference” feature may
be used to measure the difference between two power (dBm) levels, in units of dB
measured at different parts of the network.
The power meter and VFL ports accept NOYES thread-on style adapter caps and
are compatible with angled or non-angled connectors. The OPM4-FTTx offers an
automatic power shut-off feature, long battery life from standard AA alkaline
batteries, and is fully N.I.S.T. traceable.
Features
•• BPON, GPON, and EPON compatible
•• Simultaneous power measurement at 1490 and 1550 nm
•• Power shown in units of dBm or µW
•• Comparison of power levels in dB
•• Integrated VFL
•• Auto power shut-off feature
•• Dual-wavelength, sunlight readable LCD display
•• Compatible with APC or UPC connectors
•• Standard alkaline AA batteries
•• Handheld, rugged, lightweight
•• N.I.S.T traceable
Applications
•• ONT splitter installation testing
•• Fault-locating drop cables and F2 fibers from FDH to ONT
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
37
© 2008-2011, AFL, all rights reserved. OPM4-14-2000 Revision 1D, 07.29.11
Specifications are subject to change without notice.
OPM4-FTTx PON Power Meter
Specifications
a
Power Meter
Calibrated Wavelengths
1490 nm, 1550 nm
Signal Format
CW or downstream BPON, GPON, or EPON
Detector Type
Filtered InGaAs
Measurement Range
+10 to -50 dBm @ 1490 nm; +20 to -50 dBm @ 1550 nm
Accuracy b
±0.5 dB (±0.35 dB typical)
Resolution
0.01 dB
Measurement Units
dB, dBm, μW
VFL Laser
Output Power (typical)
0.8 mW
Wavelength (nominal)
650 nm
Safety
Class II, FDA 21 CFR 1040.10 & 1040.11, IEC 60825-1: 2007-3
General
Power
2 AA batteries
Battery Life (typical)
Power meter - 100 hours; Power meter (backlight on) - 16 hours;
Power meter and VFL - 6 hours; Power meter (backlight on) and VFL - 5 hours
Operating Temperature
-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
Size (H x W x D)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.26 kg (0.58 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. At calibration power levels of approximately -5 dBm for 1550 nm and -10 dBm for 1490 nm.
Ordering Information
Includes
afl no.
OPM4-FTTx PON power meter, 2 AA batteries, protective rubber boot, SC adapter for
OPM4-FTTx
power meter port, 2.5 mm universal adapter for VFL port, user’s guide, and carry case.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
38
© 2008-2011, AFL, all rights reserved. OPM4-14-2000 Revision 1D, 07.29.11
Specifications are subject to change without notice.
OPM4 Optical Power Meter
The NOYES OPM4 is a hand-held optical power meter designed
for measuring optical power in premise, Telco, or broadband
networks and for performing insertion loss measurements on
multimode or single-mode fiber optic links.
When used with NOYES OLS series light sources, the OPM4
offers automatic wavelength identification and switching-Wave
ID feature that automatically detects and sets the wavelength(s),
preventing setup and measurement errors. It significantly
increases efficiency and reduces technician errors—and saves
testing time—by eliminating the need to test each wavelength
individually. The OPM4 stores optical references for each
calibrated wavelength and offers multiple test tone detection
for fiber identification.
The OPM4 optical input port accepts a variety of NOYES
thread-on style adapter caps (ordered separately) to meet a wide
range of testing requirements. The OPM4 offers a five-minute
auto-off feature and long battery life from common AA alkaline
batteries. The OPM4 is fully N.I.S.T. traceable.
Features
•• Multimode or single-mode applications
•• Wave ID (auto identification and switching)
•• Multiple-wavelength testing
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone detection
•• Large LCD with backlight
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Automatic power-off function
•• Battery gauge
•• Long battery life with 2 AA alkaline
•• Hand-held, rugged, lightweight
Applications
•• Premises (Ge), Telco (InGaAs),
and Broadband (+26 dBm) models
•• Passive Optical Networks (PON) testing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
39
© 2004-2011, AFL, all rights reserved. OPM4-30-2000 Revision E, 2010-12-23
Specifications are subject to change without notice.
OPM4 Optical Power Meter
Specifications
a
Optical
OPM4-1D
OPM4-2D
OPM4-3D
Calibrated
Wavelengths
660, 780,
850 nm
850, 1300, 1310,
1490, 1550 nm
850, 1300, 1310,
850, 980, 1300, 1310,
1490, 1550, 1625 nm 1490, 1550, 1625 nm
Detector Type
Silicon (Si)
Germanium (Ge)
InGaAs
Measurement Range
+6 to -70
+6 to -60 dBm
+10 to -75 dBm
dBm
+6 to -45 dBm +6 to -50 dBm
+10 to -50 dBm
+6 to -45 for 850 nm +10 to -45 for 850 nm
+6 to -50 dBm
—
+6 to -45 dBm for 850 nm
Tone Detect Range
Wavelength ID Range
Accuracy b
±0.25 dB
Resolution
0.01 dB
Measurement Units
dB, dBm, μW
General
Power
2 x AA batteries
Battery Life
Operating Temperature
300 hours
-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
Size (H x W x D)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.26 kg (0.58 lb)
OPM4-4D
Filtered InGaAs
+26 to -50 dBm
+6 to -30 dBm
+6 to -25 for 850 nm
+6 to -30 dBm
+6 to -25 dBm for 850 nm
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
Ordering Information
Includes
OPM4 optical power meter, 2 AA batteries, protective rubber boot, and carry case.
AFL NO.
All OPM4 models
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
40
© 2004-2011, AFL, all rights reserved. OPM4-30-2000 Revision E, 2010-12-23
Specifications are subject to change without notice.
OPM5 Optical Power Meter
With Innovative File Management System
The NOYES OPM5 is a full-featured, hand-held optical power
meter designed for measuring optical power in premise, Telco
or broadband networks and for performing insertion loss
measurements on multimode or single-mode fiber optic links.
The standard Wave ID feature (when used with NOYES OLS series
light sources) automatically detects and sets the wavelength(s),
preventing setup and measurement errors. It significantly
increases efficiency and reduces technician errors—and saves
testing time—by eliminating the need to test each wavelength
individually. The OPM5 stores optical references for each
calibrated wavelength and offers multiple test tone detection
for fiber identification. The OPM5 is fully N.I.S.T. traceable.
Data Storage of Test Results
The OPM5 File Management system allows technicians to
organize test results into multiple files and transfer stored
results via USB to a PC for analyzing, generating reports
and printing. The supplied powerful PC Analysis and Reporting
Tool (TRM™ - Test Results Management software) allows users
to apply industry-standards-based rules to test results and
create comprehensive certification reports. Users can generate
network Pass/Fail results demonstrating compliance to industry
standards and illustrate headroom. TRM is a Windows®
compatible software.
Features
•• Multimode or single-mode applications
•• Wave ID (auto identification/switching)
•• Multiple-wavelength testing
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz tone detection
•• Large LCD with backlight
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• File management system organizes stored test data
•• Storage capability > 500 fibers
•• USB port and Windows® compatible software
for download of stored data
•• Automatic power-off function
•• Battery gauge
•• Long battery life with 2 AA alkaline, optional AC adapter
•• Hand-held, rugged, lightweight
Applications
•• Passive Optical Networks (PON) testing
•• Save test data for Report Generation with NOYES TRM Software
•• OPM5-2D (Ge) for Premises LAN/WAN multimode
or single-mode networks
•• OPM5-3D (InGaAs) for Telecommunications networks
•• OPM5-4D (Filtered-InGaAs) for high power (+26 dBm)
CATV Broadband networks or DWDM system applications
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
41
© 2010, AFL, all rights reserved. OPM5-40-2000 Revision 1B, 2010-12-28
Specifications are subject to change without notice.
OPM5 Optical Power Meter with PC Reporting Tool – TRM™
Powerful Pair
The OPM5 Optical Power Meter and TRM Test Results Management software are a powerful pair.
•• Increases efficiency
•• Reduces technician errors
•• Simple to operate with minimal training required
•• Provides customized professional reports
Target Markets
Anyone testing fiber links who requires report generation applications include:
•• Data networks
•• Telecommunications providers
•• CATV
•• Industrial
WaveID Increases Efficiency and Reduces Errors
•• Enables users to test two wavelengths simultaneously
–– Significantly reduces test time by eliminating the need to test each wavelength individually
•• Automatically detects and sets received wavelengths
–– Eliminates loss measurement errors by automatically matching OPM to transmitted wavelength
Straightforward Results Storage and Easy File Management in the Field
•• Simple-to-use interface allows for easy separation of results into files
•• Keep cable/job results separated for fast customer report generation
•• Access to files and results allows for quick and easy retest of fibers
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
42
© 2010, AFL, all rights reserved. OPM5-40-2000 Revision 1B, 2010-12-28
Specifications are subject to change without notice.
Upload test data files to PC via USB to utilize powerful data
management and reporting tool – TRM™
File Naming and Data Management Editor
•• Manage job information (Ends, Cable ID, Comments, and Operators) to meet documentation specifications in reports
•• Create bi-directional results
•• Combine results from multiple OPMs to create a complete job report
•• Automatic backup of data
Create Certification Results to Industry Standards (TIA/ISO/EN and applications)
•• Apply standards-based rules to loss results
•• Generate Pass/Fail information for each fiber
•• Demonstrate compliance to industry standards
Customized Reports
•• Create professional personalized reports with company logos
•• Reports meet accepted industry documentation standards
•• Save common report options for quick generation of future reports
•• Recall previously stored settings to save time generating reports for repeat customers
•• Create certification reports showing fiber Pass/Fail results based on customer/consultant specifications,
Industry Standard, and Industry Applications
•• Show headroom values for the primary rule (typically the industry standard)
•• Use PC analysis to verify if previously measured fibers (tested with NOYES loss test equipment)
meet loss requirements of Standards and Rules
Superior Customer Support
•• Dedicated customer service, technical support and field sales available to support customers
•• Knowledgeable timely technical support and customer service
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
43
© 2010, AFL, all rights reserved. OPM5-40-2000 Revision 1B, 2010-12-28
Specifications are subject to change without notice.
OPM5 Optical Power Meter
Specifications
Optical
a
OPM5-3D
OPM5-4D
Calibrated Wavelengths 850, 1300,
1310, 1490, 1550 nm
850, 1300, 1310, 1550,
1490, 1625 nm
850, 980, 1300, 1310,
1490, 1550, 1625 nm
Detector Type
Germanium (Ge)
InGaAs
Filtered InGaAs
Measurement Range
+6 to -60 dBm
+10 to -75 dBm
+26 to -50 dBm
Tone Detect Range
+6 to -50 dBm
+6 to -45 dBm for 850 nm
+6 to -50 dBm
+6 to -45 dBm for 850 nm
±0.25 dB
0.01 dB
dB, dBm, μW
+10 to -50 dBm
+10 to -45 dBm for 850 nm
+10 to -50 dBm
+10 to -45 dBm for 850 nm
+6 to -30 dBm
+6 to -25 dBm for 850 nm
+6 to -30 dBm
+6 to -25 dBm for 850 nm
Wavelength ID Range
Accuracy b
Resolution
Measurement Units
General
Power
Battery Life
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
OPM5-2D
2 x AA batteries, optional AC adapter
300 hours
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.26 kg (0.58 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at 25 ºC and -10 dBm per N.I.S.T. standards.
Ordering Information
Includes
AFL NO.
OPM5 optical power meter, 2 x AA batteries, protective rubber boot, USB cable,
Windows® compatible software, and carry case.
All OPM5 models
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
44
© 2010, AFL, all rights reserved. OPM5-40-2000 Revision 1B, 2010-12-28
Specifications are subject to change without notice.
OPM1 Optical Power Meter
This portable optical power meter may be used to measure optical power in premises,
telco, or broadband fiber optic networks. When used with an LED or laser light source,
the OPM1 can also measure the attenuation (insertion loss) of multimode or singlemode cables. With only two controls–ON/OFF and wavelength–the OPM1 is our simplest
to use optical power meter. Optical power in dBm and the calibration wavelength
setting are displayed on an easy-to-read LCD display. The optical input port accepts
NOYES thread-on style connector adapter caps. Adapter caps are required and must
be ordered separately. The OPM1 is fully N.I.S.T. traceable and runs on a standard 9-volt
alkaline battery.
Applications
Features
•• 850, 1300, 1310, 1550 nm
•• Premises (Ge) and
broadband (InGaAs) models
•• Displays optical power (dBm)
•• Our simplest to use optical power meter
•• N.I.S.T. traceable
•• The OPM1-2C is calibrated at 850, 1300, 1310, and 1550 nm for testing LAN, Ethernet,
FDDI, Token Ring, and single-mode fiber systems such as telco, WAN, and CATV.
•• The OPM1-3C also operates at 850, 1300, 1310, and 1550 nm but offers greater temperature stability needed for outside plant 1550 nm testing as with WAN, CATV,
and Telco systems.
Specifications
a
Optical Specifications
Calibration Wavelengths
Detector Type
Measurement Range
Accuracy (@25°C, -10.0 dBm)
Measurement Units
OPM1-2C
850, 1300, 1310, 1550 nm
Germanium (Ge)
+6 to -60 dBm
±0.25 dB
dBm
OPM1-3C
850, 1300, 1310, 1550, 1625 nm
InGaAs
+6 to -70 dBm
General Specifications
Power
Adapter Caps
Operating Temperature
Relative Humidity
Storage Temperature
Size (H x W x D)
Weight
Typical 60 hours with 9V battery
Order separately (ST, SC, FC, and others available)
-10°C to 50°C
0 to 95 % (non-condensing)
-30°C to 60°C
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.26 kg (0.58 lb)
Note:
a. All specifications valid at 25°C unless otherwise specified.
Ordering Information
Includes
Protective rubber boot, 9V battery, manual, and carrying case.
afl no.
All OPM1 models
Optical power meters and optical light sources can be packaged together as a kit.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
45
© 2002-2011, AFL, all rights reserved. OPM1-00-2001 Revision P, 2011-07-29
Specifications are subject to change without notice.
CSM1 Contractor Series
Optical Power Meter
The NOYES CSM1 from AFL is a palm-sized, cost-effective optical power meter designed
for measuring optical power in premises, telco, or broadband fiber optic networks and
for performing insertion loss measurements on multimode or single-mode fiber optic
links. Weighing only 0.4 lbs, this power meter is ideal for field use.
The CSM1 stores optical references for each calibrated wavelength and features multiple
test Tone detection for fiber identification. A large LCD display with backlight shows
measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths [nm], tone
frequency [Hz], and indicates a low battery condition.
The CSM1 optical input port accepts a variety of NOYES thread-on style adapter caps
(ordered separately) to meet a wide range of testing requirements. One adapter cap,
2.5 mm Universal, is included.
Being powered by two AA alkaline, the CSM1 offers a five-minute auto-off feature and
over 300 hours of operation with backlight off.
The CSM1 is fully N.I.S.T. traceable.
Features
•• Palm-sized, rugged, lightweight
•• Multimode or single-mode applications
•• 270, 330, 1000, 2000 Hz Tone detection
•• Large LCD with backlight
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Automatic power-off function
•• Battery gauge
•• Long battery life with 2 AA alkaline
•• Cost-effective, easy to use
•• N.I.S.T traceable
Application
•• Premises (Ge), telco (InGaAs), and broadband (+26 dBm) models
•• Passive Optical Networks (PON) testing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
46
© 2006-2011, AFL, all rights reserved. CSM1-00-2000 Revision D, 2011-08-01
Specifications are subject to change without notice.
CSM1 Contractor Series Optical Power Meter
Specifications
Optical
Calibrated
Wavelengths
a
CSM1-1
660, 780,
850 nm
CSM1-2
850, 1300,
1310, 1550 nm
CSM1-3
CSM1-4
850, 1300, 1310,
850, 980,1310, 1490,
1490, 1550, 1625 nm 1550, 1625 nm
Germanium (Ge) InGaAs
Detector Type
Silicon (Si)
Measurement Range
+6 to -70 dBm +6 to -60 dBm
Tone detect Range
+6 to -45 dBm +6 to -50 dBm
+6 to -45 dBm for 850 nm
Accuracy b
Resolution
±0.3 dB
Measurement Units
dB, dBm, μW
General
Power
Battery Life
2 AA batteries
>300 hours
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
-10°C to 5°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
11.4 x 6.4 x 3.2 cm (4.5 x 2.5 x 1.3 in)
0.18 kg (0.4 lb)
+6 to -70 dBm
Filtered InGaAs
+26 to -50 dBm
+6 to -30 dBm
+6 to -25 dBm for 850 nm
0.01 dB
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
Ordering Information
Includes
2.5 mm Universal adapter cap, 2 AA batteries, user’s guide, and carry case.
aFL NO.
All CSM1 models
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
47
© 2006-2011, AFL, all rights reserved. CSM1-00-2000 Revision D, 2011-08-01
Specifications are subject to change without notice.
OLS7-FTTH and OLS7-3
Triple Wavelength Laser Sources
The OLS7-FTTH and OLS7-3 are hand-held, rugged laser
sources designed for performing insertion loss measurements
on single-mode fiber optic links when used with an optical
power meter. When paired with an optical fiber identifier,
both models may be used for fiber identification. The LASER
output is stabilized to ensure accurate test results per current
TIA/EIA requirements.
The OLS7-FTTH and OLS7-3 feature a triple wavelength
LASER output from a single port and are easy to operate.
Each wavelength may be transmitted individually at CW
or with user selectable modulated Tone. Also, each wavelength
may be transmitted with Wave ID. When transmitting with Wave
ID, the OLS7 will also support transmitting pairs of wavelengths
in an alternating pattern and triple wavelengths in a sequential
pattern. Associated with each operating condition, the
designated LED indicator will illuminate to identify the currently
enabled operating mode and emitted wavelength wavelength(s)
along with battery charge status and external power presence.
The OLS7-FTTH model is designed specifically for today’s
FTTH network architectures featuring a triple wavelength
LASER output from a single port: 1310 nm output for testing
in the upstream direction and 1490 or 1550 nm, for testing
in the downstream direction. The OLS7-3 model features
1310/1550/1625 nm triple wavelength LASER output that is
used for single-mode applications, such as telecom or CATV.
Features
•• Triple wavelengths from a single port
•• Triple, dual, or single Wave ID, CW, Tone
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
•• Low battery LED indicator
•• Long battery life with 2 AA alkaline, optional AC adapter
•• Cost-effective, easy-to-use
•• Hand-held, rugged, lightweight
The OLS7-FTTH and OLS7-3 output ports are equipped with UCI
based removable adapters to allow the output connectors to be
inspected and cleaned. Both models offer long battery life from
common AA alkaline batteries with external AC adapter available
as an option. The OLS7 is fully N.I.S.T. traceable.
Applications
•• Passive Optical Networks (PON) testing
•• Certify SM links per TIA/EIA standards
•• Fiber identification prior to splicing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
48
© 2006-2010, AFL, all rights reserved. OLS7-00-2000 Revision D, 2010-12-29
Specifications are subject to change without notice.
OLS7-FTTH and OLS7-3
Triple Wavelength Laser Sources
Specifications
a
Optical
Wavelength (±20 nm)
Emitter Type
Spectral Width
Output Power
Output Stability
Model OLS7-FTTH
Model OLS7-3
1310 nm
1490 nm
1550 nm
1310 nm
1550 nm
1625 nm
Laser, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
5 nm
3 nm
5 nm
5 nm
5 nm
2 nm
-5 dBm (typical) into 9/125 fiber
±0.05 dB over 1 hour (after 15 min warm-up, after 30 sec typical)
±0.1 dB over 8 hours (after 15 min warm-up, after 30 sec typical)
Tone Output
270 Hz, 330 Hz, 1 kHz, 2 kHz
General
Models OLS7-FTTH and OLS7-3
Available Adapters
SC FC, ST, LC
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 72 hours (with one laser active), minimum 40 hours
Operating Temperature -10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.3 kg (0.66 lb)
Note:
a. All specifications valid at 25°C unless otherwise specified.
Ordering Information
Includes
OLS7-FTTH optical light source, protective rubber boot, 2 AA batteries, and carry case.
AFL NO.
OLS7-FTTH
OLS7-3 optical light source, protective rubber boot, 2 AA batteries and carry case.
OLS7-3
Test jumpers and connector adapters are required for operation (purchased separately).
Test jumpers with a variety of connector styles and fiber types and adapter caps for most
common connectors may be purchased from AFL.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
49
© 2006-2010, AFL, all rights reserved. OLS7-00-2000 Revision D, 2010-12-29
Specifications are subject to change without notice.
OLS4 Laser and LED Source
The OLS4 is a hand-held, rugged, integrated two-port LED
and laser light source designed for performing insertion loss
measurements on multimode or single-mode fiber optic links
when used with an optical power meter. When paired with
an optical fiber identifier, the OLS4 may be used for fiber
identification. The LED and laser outputs are stabilized to ensure
accurate test results per current TIA/EIA requirements.
The OLS4 features 850/1300 nm LED output from a multimode
output port and 1310/1550 nm laser output from a single-mode
output port. Each wavelength may be transmitted individually
at CW or with user selectable modulated Tone (SM output).
Also, each wavelength may be transmitted with Wave ID.
When transmitting with Wave ID, the OLS4 supports transmitting
pairs of wavelengths in an alternating pattern. Associated with
each operating condition, the designated LED indicator will
illuminate to identify the currently enabled operating mode
and emitted wavelength(s) along with battery charge status
and external power presence.
Both output ports are equipped with UCI-based removable
adapters to allow the output connectors to be inspected and
cleaned. The OLS4 coffers long battery life from common AA
alkaline batteries with external AC adapter available as an
option. The OLS4 is fully N.I.S.T. traceable.
Features
•• Hand-held, rugged, lightweight
•• Integrated LED and Laser light source
•• Dual wavelengths from a single port
•• Dual or single Wave ID, CW, Tone (SM output)
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
•• Low battery LED indicator
•• Long battery life with 2 AA alkaline, optional AC adapter
•• Free 50 μm and 62.5 μm mandrels
•• Cost-effective, easy-to-use
•• N.I.S.T. Traceable
Applications
•• Certify multimode and single-mode links per TIA/EIA standards
•• Fiber identification prior to splicing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
50
© 2004-2010, AFL, all rights reserved. OLS4-11-2000 Revision E, 2011-12-23
Specifications are subject to change without notice.
OLS4 Laser and LED Source
Specifications
Optical
Wavelength
Emitter Type
Spectral Width
Output Power
Output Stability
General
Power
Battery Life
Available Adapters
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
a
MM Optical Port
SM Optical Port
850 ±30 nm 1300 -10/+50 nm 1310 ±20 nm
1550 ±20 nm
LED
Laser
Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
40 nm (typ)
120 nm (typ)
5 nm (max)
5 nm (max)
>-20 dBm, 62.5 μm multimode b
0 dBm, 9 μm single-mode
±0.1 dB over 8 hours
±0.05 dB over 1 hour (after 15-minute warm-up)
(after 5-minute warm-up)
±0.1 dB over 8 hours (after 15-minute warm-up)
2 AA batteries, optional AC adapter
Typical 30 hours, minimum 20 hours Typical 72 hours, minimum 40 hours
SC FC, ST, LC
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.29 kg (0.65 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used instead of a
62.5 µm mandrel-wrapped jumper.
Ordering Information
Includes
OLS source, protective rubber boot, 2 AA batteries, mandrels, and carry case.
AFL NO.
OLS4
Test jumpers and connector adapters are required for operation (purchased separately).
Test jumpers with a variety of connector styles and fiber types and adapter caps for most
common connectors may be purchased from AFL.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
51
© 2004-2010, AFL, all rights reserved. OLS4-11-2000 Revision E, 2011-12-23
Specifications are subject to change without notice.
OLS2-Dual Laser Light Source
The OLS2-Dual is a hand-held, rugged laser source designed
for performing insertion loss measurements on single-mode
fiber optic links when used with an optical power meter. When
paired with an optical fiber identifier, the OLS2-Dual may be used
for fiber identification. The laser output is stabilized to ensure
accurate test results per current TIA/EIA requirements.
The OLS2-Dual features 1310 nm and 1550 nm laser output
from a single output port and offers several modes of operation.
Each wavelength may be transmitted individually at CW or with
user selectable modulated Tone. Also, each wavelength may be
transmitted with Wave ID. When transmitting with Wave ID, the
OLS2-Dual supports transmitting pairs of wavelengths in an
alternating pattern. Associated with each operating condition,
the designated LED indicator will illuminate to identify the
currently enabled operating mode and emitted wavelength(s)
along with battery charge status and external power presence.
The OLS2-Dual output port is equipped with a UCI-based
removable adapter to allow the output connector to be inspected
and cleaned. The OLS2-Dual offers long battery life from common
AA alkaline batteries with external AC adapter available as an
option. The OLS2-Dual is fully N.I.S.T. traceable.
Features
•• Dual wavelengths from a single port
•• Dual or single Wave ID, CW, Tone
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
•• Adjustable output
•• Low battery LED indicator
•• Long battery life with 2 AA alkaline, optional AC adapter
•• Cost-effective, easy-to-use
•• Hand-held, rugged, lightweight
Applications
•• Certify SM links per TIA/EIA standards
•• Fiber identification prior to splicing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
52
© 2004-2010, AFL, all rights reserved. LS2D-20-2000 Revision E, 2010-12-23
Specifications are subject to change without notice.
OLS2-Dual Laser Light Source
Specifications
a
Optical
Wavelength
OLS2-Dual (single port)
1310 ±20 nm
Emitter Type
Laser, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Spectral Width (FWHM)
5 nm (max)
Output Power
0 dBm b
Output Stability
±0.05 dB over 1 hour (after 15-minute warm-up)
±0.1 dB over 8 hours (after 15-minute warm-up)
Tone Output
270 Hz, 330 Hz, 1 kHz, 2 kHz
General
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 120 hours, minimum 75 hours
Available Adapters
SC FC, ST, LC
Operating Temperature
Storage Temperature
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.29 kg (0.65 lb)
1550 ±20 nm
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Adjustable 2 dB.
Ordering Information
Includes
OLS2-Dual optical light source, protective rubber boot, 2 AA batteries, and carry case.
AFL NO.
OLS2-Dual
Test jumpers and connector adapters are required for operation (purchased separately).
Test jumpers with a variety of connector styles and fiber types and adapter caps for most
common connectors may be purchased from AFL.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
53
© 2004-2010, AFL, all rights reserved. LS2D-20-2000 Revision E, 2010-12-23
Specifications are subject to change without notice.
OLS1-Dual LED Light Source
The OLS1-Dual is a hand-held, rugged LED light source designed
for performing insertion loss measurements on multimode fiber
optic links when used with an optical power meter. The LED
output is stabilized to ensure accurate test results per current
TIA/EIA requirements.
The OLS1-Dual features 850 nm and 1300 nm LED output from
a single-output port and is easy to operate with only a power
button and a wavelength select button. Each wavelength may
be transmitted individually at CW or with Wave ID. When
transmitting with Wave ID, the OLS1-Dual supports transmitting
pairs of wavelengths in an alternating pattern. Associated with
each operating condition, the designated LED indicator will
illuminate to identify the currently-enabled operating mode and
emitted wavelength(s) along with battery charge status and
external power presence.
The output port is equipped with UCI-based removable adapters
to allow the output connectors to be inspected and cleaned.
The OLS1-Dual offers long battery life from common AA alkaline
batteries with external AC adapter available as an option.
The OLS1-Dual is fully N.I.S.T. traceable.
Features
•• Dual wavelengths from a single port
•• Dual or single Wave ID, CW
•• Low battery LED indicator
•• Compliant with the IEC 61280-4-1 standard when
used with an external conditioner
•• Long battery life with 2 AA alkaline, optional AC adapter
•• Free 50 μm and 62.5 μm mandrels
•• Cost-effective, easy-to-use
•• Hand-held, rugged, lightweight
Applications
•• Certify 50 or 62.5 µm multimode fiber links for any 850 or
1300 nm application, including Gigabit Ethernet (GBE) per
TIA/EIA standards
•• The 1300 nm output can also be used to test short distance
(up to 10 km) single-mode fiber links
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
54
© 2006-2010, AFL, all rights reserved. LS1D-30-2000 Revision D, 2010-12-23
Specifications are subject to change without notice.
OLS1-Dual LED Light Source
Specifications
a
Optical
OLS1-Dual (single port)
Wavelength
850 ±30 nm
Emitter Type
LED,Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Spectral Width
40 nm (typ)
Output Power
>-20 dBm b
Output Stability
±0.1 dB over 8 hours (after 5-minute warm-up)
Fiber Size
62.5 μm c
1300 +50/-10 nm
120 nm (typ)
General
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 30 hours, minimum 20 hours
Available Adapters
SC, FC, ST
Operating Temperature
-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.29 kg (0.65 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper
is used instead of a 62.5 µm mandrel-wrapped jumper.
c. May be used to test 50 or 62.5 μm fiber with supplied mandrels. All specifications at 25°C.
Ordering Information
Includes
OLS1-Dual, protective rubber boot, 2 AA batteries, mandrels, and carry case.
AFL NO.
OLS1-Dual
Test jumpers and connector adapters are required for operation (purchased separately).
Test jumpers with a variety of connector styles and fiber types and adapter caps for most
common connectors may be purchased from AFL.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
55
© 2006-2010, AFL, all rights reserved. LS1D-30-2000 Revision D, 2010-12-23
Specifications are subject to change without notice.
OLS1 LED Light Source
The OLS1 LED light source is a cost-effective, rugged, handheld instrument designed for
performing insertion loss measurements on fiber optic links when used with an optical
power meter. The LED output is stabilized to ensure accurate test results per current TIA/
EIA requirements.
The OLS1 is easy to operate with only a [Wavelength/ Power] switch, which selects
optical wavelengths or disables unit ( position). [Active Output], [Battery], and
[External Power] indicators identify the currently enabled output port, battery charge
status, and external power presence. Weighing only 0.65 lb, the OLS1 is compact and
convenient for field use. The OLS1 operates over 60 hours from a typical 9V alkaline
battery. An AC adapter is optional for extended use.
The OLS1 light source is fully N.I.S.T. traceable.
Features
•• Rugged, handheld, lightweight
•• 850 and 1300 nm LED (multimode) light sources (660 nm available)
•• Certify 50 µm or 62.5 µm multimode fiber links for any 850 or 1300 nm
application, including Gigabit Ethernet (GBE) per TIA/EIA standards
•• Free 50 µm and 62.5 µm mandrels
•• Long battery life
•• Cost-effective, easy to use
•• N.I.S.T. traceable
Applications
•• Operating at 850 nm, the OLS1-1C can be used for testing Ethernet, Gigabit Ethernet,
Token Ring, and other multimode ­LAN systems.
•• Operating at 660 nm, the OLS1-1C can test 1000 µ fiber and trace fibers with
the visible 660 nm output.
•• The OLS1-2C operates at 850 and 1300 nm for use on Ethernet, Token Ring,
and FDDI. The 1300 nm output can also be used to test short distance (up to 10 km)
single-mode fiber links.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
56
© 2002-2011, AFL, all rights reserved. OLS1-00-2001 Revision R, 2011-07-29
Specifications are subject to change without notice.
OLS1 LED Light Source
Specifications
a
Optical Specifications
Output Ports
Output Wavelength
OLS1-1C
2
660 nm - red
850 + 35/-40 nm
OLS1-2C
2
850 + 35/-40 nm
Spectral Width (typ) (FWHM)
30 nm
40 nm
40 nm
120 nm
Output Power
Fiber Size
Output Connector
-10 dBm b
>-20 dBm
1000 µm, 62.5 µm c
ST
>-20 dBm
62.5 µm c
ST
>-20 dBm
Emitter Type
Stability
LED, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
±0.1 dB over 8 hours (after 5-minute warm-up)
General Specifications
Power
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
Typical 60 hours with 9V battery, optional AC adapter
-10°C to 50°C
-30°C to 60°C
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.29 kg (0.65 lb)
1300 +50/-10 nm
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b -10 dBm output is into 1000 micron fiber.
c. May be used to test 50 or 62.5 μm fiber with supplied mandrels.
Ordering Information
Includes
Protective rubber boot, 9V battery, 50 µm and 62.5 µm mandrels, and carrying case.
afl no.
All OLS1 Models
Optical light sources and optical power meters can be packaged together as a kit.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
57
© 2002-2011, AFL, all rights reserved. OLS1-00-2001 Revision R, 2011-07-29
Specifications are subject to change without notice.
CSS1-MM Contractor Series
Dual LED Light Source
The NOYES CSS1-MM from AFL is a palm-sized, cost-effective dual LED light source
designed for performing insertion loss measurements on multimode fiber optic links
when used with an optical power meter. When paired with an optical fiber identifier,
the CSS1-MM may be used for fiber identification. The LED output is stabilized to
ensure accurate test results per current TIA/EIA requirements. Weighing only 0.4 lb,
this light source is ideal for field use.
The CSS1-MM features 850 nm and 1300 nm LED output from a single output port
and is easy to operate. Each wavelength may be transmitted individually at CW or with
user selectable modulated Tone. The optical output port is equipped with a fixed SC
connector. A large LCD display with backlight shows emitted wavelengths (nm), tone
frequency (Hz), and indicates a low battery condition. The CSS1-MM offers a five-minute
auto-off feature and long battery life from common AA alkaline batteries.
The CSS1-MM is fully N.I.S.T. traceable.
Features
•• Palm-sized, rugged, lightweight
•• Dual wavelengths from a single port
•• CW and modulated Tone
•• 270, 330, 1000, 2000 Hz Tone
•• Large LCD with backlight
•• Automatic power-off function
•• Battery gauge
•• Long battery life with AA alkaline
•• Free 50 µm and 62.5 µm mandrels
•• Cost-effective, easy to use
•• N.I.S.T traceable
Applications
•• Certify 50 or 62.5 µm multimode fiber links for any 850 or 1300 nm application,
including Gigabit Ethernet (GBE), per TIA/EIA standards
•• Fiber identification prior to splicing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
58
© 2006-2011, AFL, all rights reserved. CSS1-01-2000 Revision D, 2011-08-01
Specifications are subject to change without notice.
CSS1-MM Contractor Series Dual LED Light Source
Specifications
a
Optical
CSS1-MM (single port)
Output Wavelength
850 nm ±20 nm
1300 nm +40/-60 nm
Spectral Width (max)
35 nm
170 nm
Output Power
-20.0 dBm into 62.5/125 fiber
Emitter Type
LED, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Output Stability
± 0.1 dB over 1 hour (after 30 seconds typically)
± 0.15 dB over 8 hours (after 30 seconds typically)
Tone Output
270, 330, 1000, 2000 Hz
General
Output Connector
SC
Power
2 AA batteries
Battery Life
30 hours typical
Operating Temperature
-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
11.4 x 6.4 x 3.2 cm (4.5 x 2.5 x 1.3 in)
Weight
0.18 kg (0.4 lb)
Note:
a. All specifications valid at 25°C unless otherwise specified.
Ordering Information
Includes
2 AA batteries, user’s guide, and carry case.
AFL NO.
CSS1-MM
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
59
© 2006-2011, AFL, all rights reserved. CSS1-01-2000 Revision D, 2011-08-01
Specifications are subject to change without notice.
CSS1-SM Contractor Series
Dual Laser Light Source
The NOYES CSS1-SM from AFL is a palm-sized, cost-effective dual laser source designed
for performing insertion loss measurements on single-mode fiber optic links when used
with an optical power meter. When paired with an optical fiber identifier,
the CSS1-SM may be used for fiber identification. The laser output is stabilized to ensure
accurate test results per current TIA/EIA requirements. Weighing only 0.4 lb,
this light source is ideal for field use.
The CSS1-SM features 1310 nm and 1550 nm laser output from a single output
port and is easy to operate. Each wavelength may be transmitted individually at
CW or with user selectable modulated Tone. The output port is equipped with UCI
based removable adapters to allow the output connectors to be inspected and cleaned.
A large LCD display with backlight shows emitted wavelengths (nm), tone frequency
(Hz), and indicates a low battery condition. The CSS1-SM offers long battery life from
common AA alkaline batteries. The CSS1-SM is fully N.I.S.T. traceable.
Features
•• Palm-sized, rugged, lightweight
•• Dual wavelengths from a single port
•• CW and modulated Tone
•• 270, 330, 1000, 2000 Hz Tone
•• Large LCD with backlight
•• Automatic power-off function
•• Battery gauge
•• Long battery life with AA alkaline
•• Cost-effective, easy to use
•• N.I.S.T traceable
Applications
•• Certify SM links per TIA/EIA standards
•• Fiber identification prior to splicing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
60
© 2006-2011, AFL, all rights reserved. CSS1-00-2000 Revision D, 2011-08-01
Specifications are subject to change without notice.
CSS1-SM Contractor Series Dual Laser Light Source
Specifications
a
Optical
CSS1-SM (single port)
Output Wavelength
1310 nm ±20 nm, 1550 nm ±20 nm
Spectral Width (max)
5 nm
Output Power
0.0 dBm into 9/125 fiber
Emitter Type
Laser, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Output Stability
±0.05 dB typical over 1 hour (after 30 seconds typically)
±0.15 dB over 8 hours (after 30 seconds typically)
Tone Output
270, 330, 1000, 2000 Hz
General
Output Connector
SC, FC, ST, LC
Power
2 AA batteries
Battery Life
75 hours typical
Operating Temperature
-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
11.4 x 6.4 x 3.2 cm (4.5 x 2.5 x 1.3 in)
Weight
0.18 kg (0.4 lb)
Note:
a. All specifications valid at 25°C unless otherwise specified.
Ordering Information
Includes
2 AA batteries, user’s guide, and carry case.
AFL NO.
CSS1-SM
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
61
© 2006-2011, AFL, all rights reserved. CSS1-00-2000 Revision D, 2011-08-01
Specifications are subject to change without notice.
SMLP5-5 Test Kit with Wave ID,
Set Reference, and Data Storage
The SMLP5-5 test kit combines the OPM5-2D optical power
meter and OLS4 integrated LED and laser light source and
is ideally suited for testing fiber optic networks with hybrid
(single-mode and multimode) cables.
The OLS4 features 850/1300 nm LED output from a multimode
output port and 1310/1550 nm laser output from a single-mode
output port. Each wavelength may be transmitted individually
at CW or with user selectable modulated Tone(SM output). Also,
each wavelength may be transmitted with Wave ID. Both output
ports are equipped with UCI based removable adapters to allow
the output connectors to be inspected and cleaned.
The OPM5-2D is a full-featured, hand-held optical power
meter designed for measuring optical power in premise, telco,
or broadband networks and for performing insertion loss
measurements on multimode or single-mode fiber optic links.
The standard Wave ID feature (when used with NOYES OLS series
light sources) automatically detects and sets the wavelength(s),
preventing setup and measurement errors. It significantly
increases efficiency and reduces technician errors—and saves
testing time—by eliminating the need to test each wavelength
individually. The OPM5-2D stores optical references for each
calibrated wavelength and offers multiple test tone detection
for fiber identification.
Features (SMLP5-5 Test Kit)
•• Wave ID reduces test time
•• Hand-held, rugged, lightweight
•• Cost-effective, easy-to-use
•• N.I.S.T traceable
•• OLS4 Quad Light Source
•• Dual or single Wave ID, CW, Tone
•• Industry standard 2 kHz test Tone
•• 50 µm and 62.5 µm mandrels
•• OPM5-2D Optical Power Meter
•• File management system organizes stored test data
•• Storage capability >500 fibers
•• USB port for download of stored data
•• TRM™ PC Reporting Tool (Windows® compatible)
•• Apply certification rules to test results
•• Create professional test reports
•• Archive test results
Data Storage of Test Results
The OPM5-2D File Management system allows technicians
to organize test results into multiple files and transfer stored
results via USB to a PC for analyzing, generating reports, and
printing. The supplied powerful PC Analysis and Reporting Tool
(TRM - Test Results Management software) allows users to
apply industry standards based rules to test results and create
comprehensive certification reports. Users can generate network
Pass/Fail results demonstrating compliance to industry standards
and illustrate headroom. TRM is a Windows® compatible
software. The SMLP5-5 test kit is fully N.I.S.T. traceable.
Applications
•• Certify multimode and single-mode links per TIA/EIA standards
•• Fiber identification prior to splicing
•• Passive Optical Networks (PON) testing
•• Save test data for report generation with NOYES TRM Software
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
62
© 2002-2011, AFL, all rights reserved. SMLP-55-2001 Revision E, 2011-01-10
Specifications are subject to change without notice.
SMLP5-5 Test Loss Test Kit with PC Reporting Tool – TRM™
Powerful Pair
The SMLP loss test kit and TRM Test Results Management software are a powerful pair.
•• Increases efficiency
•• Reduces technician errors
•• Simple to operate with minimal training required
•• Provides customized professional reports
Target Markets
Anyone testing fiber links who requires report generation applications include:
•• Data networks
•• Telecommunications providers
•• CATV
•• Industrial
WaveID Increases Efficiency and Reduces Errors
•• Enables users to test two wavelengths simultaneously
–– Significantly reduces test time by eliminating the need to test each wavelength individually
•• Automatically detects and sets received wavelengths
–– Eliminates loss measurement errors by automatically matching OPM to transmitted wavelength
Straightforward Results Storage and Easy File Management in the Field
•• Simple to use interface allows for easy separation of results into files
•• Keep cable/job results separated for fast customer report generation
•• Access to files and results allows for quick and easy retest of fibers
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
63
© 2002-2011, AFL, all rights reserved. SMLP-55-2001 Revision E, 2011-01-10
Specifications are subject to change without notice.
SMLP5-5 Test Kit with Wave ID, Set Reference, and Data Storage
File Naming and Data Management Editor
•• Manage job information (Ends, Cable ID, Comments, and Operators) to meet documentation specifications in reports
•• Create bi-directional results
•• Combine results from multiple OPMs to create a complete job report
•• Automatic backup of data
Create Certification Results to Industry Standards (TIA/ISO/EN and applications)
•• Apply standards-based rules to loss results
•• Generate Pass/Fail information for each fiber
•• Demonstrate compliance to industry standards
Customized Reports
•• Create professional personalized reports with company logos
•• Reports meet accepted industry documentation standards
•• Save common report options for quick generation of future reports
•• Recall previously stored settings to save time generating reports for repeat customers
•• Create certification reports showing fiber Pass/Fail results based on customer/consultant specifications,
Industry Standard, and Industry Applications
•• Show headroom values for the primary rule (typically the industry standard)
•• Use PC analysis to verify if previously measured fibers (tested with NOYES loss test equipment)
meet loss requirements of Standards and Rules
Superior Customer Support
•• Dedicated customer service, technical support and field sales available to support customers
•• Knowledgeable timely technical support and customer service
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
64
© 2002-2011, AFL, all rights reserved. SMLP-55-2001 Revision E, 2011-01-10
Specifications are subject to change without notice.
SMLP5-5 Test Kit with Wave ID, Set Reference, and Data Storage
OLS4 Light Source Specifications
Optical
Wavelength
Emitter Type
Spectral Width
Output Power
Output Stability
General
Power
Battery Life
Available Adapters
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
MM Optical Port
OPM5-2D Specifications
a
SM Optical Port
850
1300
1310
1550
±30 nm
-10/+50 nm ±20 nm
±20 nm
LED
Laser
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
40 nm (typ) 120 nm (typ) 5 nm (max) 5 nm (max)
>-20 dBm,
0 dBm,
62.5 µm multimode b
9 µm single-mode
±0.1 dB over 8 hours
±0.05 dB over 1 hour
(after 5-minute warm-up) (after 15-minute warm-up)
±0.1 dB over 8 hours
(after 15-minute warm-up)
Optical
OPM5-2D
Calibrated Wavelengths
850, 1300, 1310, 1490, 1550 nm
Detector Type
Germanium (Ge)
Measurement Range
+6 to -60 dBm
Tone Detect Range
+6 to -50 dBm
+6 to -45 dBm for 850 nm
+6 to -50 dBm
+6 to -45 dBm for 850 nm
±0.25 dB
0.01 dB
dB, dBm, μW
Wavelength ID Range
Accuracy c
Resolution
Measurement Units
General
Power
Battery Life
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
2 AA batteries, optional AC adapter
Typical 30 hours,
Typical 72 hours,
minimum 20 hours
minimum 40 hours
SC FC, ST, LC
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.29 kg (0.65 lb)
a
2 AA batteries, optional AC adapter
300 hours
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.26 kg (0.58 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
c. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
Ordering Information
Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles
and fiber types and adapter caps for most common connectors may be purchased from AFL.
Includes
OLS4 optical light source, OPM5-2D optical power meter, AA batteries, protective rubber boots, adapter cap, USB cable,
PC reporting tool - TRM™ (Windows® compatible), 50 and 62.5 µm mandrels, and carry case
AFL NO.
SMLP5-5
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
65
© 2002-2011, AFL, all rights reserved. SMLP-55-2001 Revision E, 2011-01-10
Specifications are subject to change without notice.
SMLP4-4 SM/MM Test Kit with
Wave ID and Set Reference
The SMLP4-4 test kit combines the OPM4-2D optical power
meter and OLS4 integrated LED and laser light source and
is ideally suited for testing fiber optic networks with hybrid
(single-mode and multimode) cables.
The OLS4 features 850/1300 nm LED output from a multimode
output port and 1310/1550 nm laser output from a single-mode
output port. Each wavelength may be transmitted individually
at CW or with user selectable modulated Tone (SM output).
Also, each wavelength may be transmitted with Wave ID.
When transmitting with Wave ID, the OLS4 supports transmitting
pairs of wavelengths in an alternating pattern. Associated with
each operating condition, the designated LED indicator will
illuminate to identify the currently enabled operating mode and
emitted wavelength(s) along with battery charge status and
external power presence. Both output ports are equipped with
UCI based removable adapters to allow the output connectors
to be inspected and cleaned.
Features
•• Hand-held, rugged, lightweight
•• Wave ID (auto identification and switching)
•• Dual or single Wave ID, CW, Tone
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
•• Large LCD with backlight (OPM4-2D)
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Low battery indicator
•• Long battery life with 2 AA alkaline
•• Free 50 µm and 62.5 µm mandrels
•• Cost-effective, easy-to-use
•• N.I.S.T traceable
When used with the OLS4, the OPM4-2D offers automatic
wavelength identification and switching-Wave ID feature that
automatically detects and sets the wavelength(s), preventing
setup and measurement errors. It significantly increases efficiency
and reduces technician errors—and saves testing time—by
eliminating the need to test each wavelength individually.
The OPM4-2D stores optical references for each calibrated
wavelength and offers multiple test tone detection for fiber
identification. The OPM4-2D optical input port accepts a variety
of NOYES thread-on style adapter caps (ordered separately) to
meet a wide range of testing requirements.
Applications
•• Certify multimode and single-mode links per TIA/EIA standards
•• Fiber identification prior to splicing
The SMLP4-4 test kit is fully N.I.S.T. traceable.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
66
© 2002-2010, AFL, all rights reserved. SMLP-44-2000 Revision E, 2009-12-28
Specifications are subject to change without notice.
SMLP4-4 SM/MM Test Kit with Wave ID and Set Reference
OLS4 Specifications
Optical
Wavelength
Emitter Type
Spectral Width
Output Power
Output Stability
General
Power
a
OPM4-2D Specifications
MM Optical Port
SM Optical Port
850
1300
1310
1550
±30 nm
-10/+50 nm ±20 nm
±20 nm
LED
Laser
Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
40 nm (typ) 120 nm (typ) 5 nm (max) 5 nm (max)
>-20 dBm,
0 dBm,
62.5 µm multimode b
9 µm single-mode
±0.1 dB over 8 hours
±0.05 dB over 1 hour
(after 5 min. warm-up)
(after 15 min. warm-up)
±0.1 dB over 8 hours
(after 15 min. warm-up)
Optical
OPM4-2D
Calibrated Wavelengths
850, 1300,1310, 1490, 1550 nm
Detector Type
Germanium (Ge)
Measurement Range
+6 to -60 dBm
Tone Detect Range
+6 to -50 dBm
+6 to -45 for 850 nm
+6 to -50 dBm
+6 to -45 dBm for 850 nm
± 0.25 dB
Wavelength ID Range
Accuracy c
Resolution
2 AA batteries, optional AC adapter
Battery Life
Typical 30 hours,
Typical 72 hours,
minimum 20 hours
minimum 40 hours
Available Adapters
SC FC, ST, LC
Operating Temperature -10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.29 kg (0.65 lb)
a
0.01 dB
Measurement Units
dB, dBm, μW
General
Power
2 AA batteries
Battery Life
300 hours
Operating Temperature
-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
Size (H x W x D)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.26 kg (0.58 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
c. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
Ordering Information
Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles
and fiber types and adapter caps for most common connectors may be purchased from AFL.
Includes
OLS4 optical light source, OPM4-2D optical power meter, AA batteries, protective rubber boots, adapter cap, 50 and 62.5 µm mandrels and carry case.
AFL NO.
SMLP4-4
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
67
© 2002-2010, AFL, all rights reserved. SMLP-44-2000 Revision E, 2009-12-28
Specifications are subject to change without notice.
SLP5 Triple Wave Test Kits with Wave ID, Set Reference, Data Storage
The SLP5 triple wavelength single-mode test kits are available
in two models, SLP5-FTTH and SLP5-7. The SLP5-FTTH and
SLP5-7 model combine the OPM5-4D optical power meter
and either OLS7-FTTH (1310/1490/1550 nm) or OLS7-3
(1310/1550/1625 nm) laser source respectively.
The OLS7-FTTH and OLS7-3 feature a triple wavelength laser
output from a single port and are easy to operate. Each
wavelength may be transmitted individually at CW or with
user selectable modulated Tone. Also, each wavelength may
be transmitted with Wave ID. The OLS7-FTTH and OLS7-3
output ports are equipped with UCI based removable adapters
to allow the output connectors to be inspected and cleaned.
The OPM5-4D is a full-featured, hand-held optical power
meter designed for measuring optical power in premise, telco,
or broadband networks and for performing insertion loss
measurements on multimode or single-mode fiber optic links.
The standard Wave ID feature (when used with NOYES OLS series
light sources) automatically detects and sets the wavelength(s),
preventing setup and measurement errors. It significantly
increases efficiency and reduces technician errors—and saves
testing time—by eliminating the need to test each wavelength
individually. The OPM5-4D stores optical references for each
calibrated wavelength and offers multiple test tone detection
for fiber identification.
Features
•• Hand-held, rugged, lightweight
•• Wave ID (auto identification and switching)
•• Triple, dual, or single Wave ID, CW, Tone
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Large LCD with backlight (OPM5-4D)
•• File management system organizes stored test data (OPM5-4D)
•• Storage capability > 500 fibers (OPM5-4D)
•• USB port and Windows® compatible software for download
of stored data (OPM5-4D)
•• Low battery indicator
•• Long battery life with 2 AA alkaline, optional AC adapter
•• Cost-effective, easy-to-use
•• N.I.S.T traceable
Data Storage of Test Results
The OPM5-4D File Management system allows technicians
to organize test results into multiple files and transfer stored
results via USB to a PC for analyzing, generating reports, and
printing. The supplied powerful PC Analysis and Reporting Tool
(TRM™ - Test Results Management software) allows users to
apply industry standards based rules to test results and create
comprehensive certification reports. Users can generate network
Pass/Fail results demonstrating compliance to industry standards
and illustrate headroom. TRM is a Windows® compatible
software. The SLP5 test kits are fully N.I.S.T. traceable.
Applications
•• Passive Optical Networks (PON) testing
•• Certify SM links per TIA/EIA standards
•• Fiber identification prior to splicing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
68
© 2006-2011, AFL, all rights reserved. SLP5-07-2000 Revision C, 2011-01-06
Specifications are subject to change without notice.
SLP5 Test Loss Test Kit with PC Reporting Tool – TRM™
Powerful Pair
The SLP5 loss test kit and TRM Test Results Management software are a powerful pair.
•• Increases efficiency
•• Reduces technician errors
•• Simple to operate with minimal training required
•• Provides customized professional reports
Target Markets
Anyone testing fiber links who requires report generation applications include:
•• Data networks
•• Telecommunications providers
•• CATV
•• Industrial
WaveID Increases Efficiency and Reduces Errors
•• Enables users to test two wavelengths simultaneously
–– Significantly reduces test time by eliminating the need to test each wavelength individually
•• Automatically detects and sets received wavelengths
–– Eliminates loss measurement errors by automatically matching OPM to transmitted wavelength
Straightforward Results Storage and Easy File Management in the Field
•• Simple-to-use interface allows for easy separation of results into files
•• Keep cable/job results separated for fast customer report generation
•• Access to files and results allows for quick and easy retest of fibers
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
69
© 2006-2011, AFL, all rights reserved. SLP5-07-2000 Revision C, 2011-01-06
Specifications are subject to change without notice.
Upload test data files to PC via USB to utilize powerful data
management and reporting tool – TRM™
File Naming and Data Management Editor
•• Manage job information (Ends, Cable ID, Comments, and Operators) to meet documentation specifications in reports
•• Create bi-directional results
•• Combine results from multiple OPMs to create a complete job report
•• Automatic backup of data
Create Certification Results to Industry Standards (TIA/ISO/EN and applications)
•• Apply standards-based rules to loss results
•• Generate Pass/Fail information for each fiber
•• Demonstrate compliance to industry standards
Customized Reports
•• Create professional personalized reports with company logos
•• Reports meet accepted industry documentation standards
•• Save common report options for quick generation of future reports
•• Recall previously stored settings to save time generating reports for repeat customers
•• Create certification reports showing fiber Pass/Fail results based on customer/consultant specifications,
Industry Standard, and Industry Applications
•• Show headroom values for the primary rule (typically the industry standard)
•• Use PC analysis to verify if previously measured fibers (tested with NOYES loss test equipment)
meet loss requirements of Standards and Rules
Superior Customer Support
•• Dedicated customer service, technical support and field sales available to support customers
•• Knowledgeable timely technical support and customer service
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
70
© 2006-2011, AFL, all rights reserved. SLP5-07-2000 Revision C, 2011-01-06
Specifications are subject to change without notice.
SLP5 Triple Wave Test Kits with Wave ID, Set Reference, Data Storage
OPM5-4D Specifications
OLS7 Specifications
a
Optical
Calibrated Wavelengths
850, 980, 1310, 1490, 1550, 1625 nm
Detector Type
Filtered InGaAs
Measurement Range
+26 to -50 dBm
Tone Detect Range
+6 to -30 dBm
+6 to -25 dBm for 850 nm
+6 to -30 dBm
+6 to -25 dBm for 850 nm
±0.25 dB
0.01 dB
dB, dBm, μW
Wavelength ID Range
Accuracy b
Resolution
Measurement Units
General
Power
Battery Life
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
OPM5-4D
a
Optical
Model OLS7-FTTH
Model OLS7-3
Wavelength (±20 nm) 1310
1490
1550
1310
1550
1625
Emitter Type
Laser, Class I FDA 21 CFR 1040.10 and
1040.11, IEC 60825-1: 2007-03
Spectral Width
5 nm
3 nm
5 nm
5 nm
5 nm
2 nm
Output Power
-5 dBm (typical) into 9/125 fiber
Output Stability c
±0.05 dB over 1 hour
±0.1 dB over 8 hours
Tone Output
270 Hz, 330 Hz, 1 kHz, 2 kHz
General
Models OLS7-FTTH and OLS7-3
Available Adapters
SC, FC, ST, LC
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 72 hours (with one laser active),
minimum 40 hours
Operating Temperature -10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.3 kg (0.66 lb)
2 AA batteries, optional AC adapter
300 hours
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.26 kg (0.58 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
c. After 15-minute warm-up, after 30-second typical.
Ordering Information
Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles
and fiber types and adapter caps for most common connectors may be purchased from AFL.
Includes
OLS7-3 optical light source, OPM5-4D optical power meter, AA batteries, protective rubber boots, adapter cap, USB cable,
Windows® compatible software, and carry case.
OLS7-FTTH optical light source, OPM5-4D optical power meter, AA batteries, protective rubber boots, adapter cap, USB cable,
Windows® compatible software, and carry case.
AFL NO.
SLP5-7
SLP5-FTTH
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
71
© 2006-2011, AFL, all rights reserved. SLP5-07-2000 Revision C, 2011-01-06
Specifications are subject to change without notice.
SLP5-6D SM Test Kit with Wave ID, Set Reference and Data Storage
The SLP5-6D test kit combines the OPM5-4D optical power
meter and OLS2-Dual laser light source and is ideally suited
for testing single-mode fiber optic networks.
The OLS2-Dual features 1310 nm and 1550 nm laser output
from a single output port and offers several modes of operation.
Each wavelength may be transmitted individually at CW or with
user selectable modulated Tone. Also, each wavelength may be
transmitted with Wave ID. The OLS2-Dual output port is equipped
with a UCI based removable adapter to allow the output
connector to be inspected and cleaned.
The OPM5-4D is a full-featured, hand-held optical power
meter designed for measuring optical power in premise, telco
or broadband networks and for performing insertion loss
measurements on multimode or single-mode fiber optic links.
The standard Wave ID feature (when used with NOYES OLS series
light sources) automatically detects and sets the wavelength(s),
preventing setup and measurement errors. It significantly
increases efficiency and reduces technician errors—and saves
testing time—by eliminating the need to test each wavelength
individually. The OPM5-4D stores optical references for each
calibrated wavelength and offers multiple test tone detection
for fiber identification.
Features
•• Hand-held, rugged, lightweight
•• Wave ID (auto identification and switching)
•• Dual or single Wave ID, CW, Tone
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
•• Adjustable output
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Large LCD with backlight (OPM5-4D)
•• File management system organizes stored test data (OPM5-4D)
•• Storage capability > 500 fibers (OPM5-4D)
•• USB port and Windows® compatible software for
download of stored data (OPM5-4D)
•• Low battery indicator
•• Long battery life with 2 AA alkaline, optional AC adapter
•• Cost-effective, easy-to-use
•• N.I.S.T traceable
Data Storage of Test Results
The OPM5-4D File Management system allows technicians
to organize test results into multiple files and transfer stored
results via USB to a PC for analyzing, generating reports
and printing. The supplied powerful PC Analysis and Reporting
Tool (TRM™ - Test Results Management software) allows
users to apply industry standards based rules to test results
and create comprehensive certification reports. Users can
generate network Pass/Fail results demonstrating compliance
to industry standards and illustrate headroom. TRM is a
Windows® compatible software.
Applications
•• Certify single-mode links per TIA/EIA standards
•• Fiber identification prior to splicing
The SLP5-6D test kit is fully N.I.S.T. traceable.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
72
© 2002-2010, AFL, all rights reserved. SLP5-30-2000 Revision E, 2010-12-28
Specifications are subject to change without notice.
SLP5-6D Test Loss Test Kit with PC Reporting Tool – TRM™
Powerful Pair
The SLP5-6D loss test kit and TRM Test Results Management software are a powerful pair.
•• Increases efficiency
•• Reduces technician errors
•• Simple to operate with minimal training required
•• Provides customized professional reports
Target Markets
Anyone testing fiber links who requires report generation applications include:
•• Data networks
•• Telecommunications providers
•• CATV
•• Industrial
WaveID Increases Efficiency and Reduces Errors
•• Enables users to test two wavelengths simultaneously
–– Significantly reduces test time by eliminating the need to test each wavelength individually
•• Automatically detects and sets received wavelengths
–– Eliminates loss measurement errors by automatically matching OPM to transmitted wavelength
Straightforward Results Storage and Easy File Management in the Field
•• Simple to use interface allows for easy separation of results into files
•• Keep cable/job results separated for fast customer report generation
•• Access to files and results allows for quick and easy retest of fibers
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
73
© 2002-2010, AFL, all rights reserved. SLP5-30-2000 Revision E, 2010-12-28
Specifications are subject to change without notice.
Upload test data files to PC via USB to utilize powerful data
management and reporting tool – TRM™
File Naming and Data Management Editor
•• Manage job information (Ends, Cable ID, Comments and Operators) to meet documentation specifications in reports
•• Create bi-directional results
•• Combine results from multiple OPMs to create a complete job report
•• Automatic backup of data
Create Certification Results to Industry Standards (TIA/ISO/EN and applications)
•• Apply standards-based rules to loss results
•• Generate Pass/Fail information for each fiber
•• Demonstrate compliance to industry standards
Customized Reports
•• Create professional personalized reports with company logos
•• Reports meet accepted industry documentation standards
•• Save common report options for quick generation of future reports
•• Recall previously stored settings to save time generating reports for repeat customers
•• Create certification reports showing fiber Pass/Fail results based on customer/consultant specifications,
Industry Standard and Industry Applications
•• Show headroom values for the primary rule (typically the industry standard)
•• Use PC analysis to verify if previously measured fibers (tested with NOYES loss test equipment)
meet loss requirements of Standards and Rules
Superior Customer Support
•• Dedicated customer service, technical support and field sales available to support customers
•• Knowledgeable timely technical support and customer service
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
74
© 2002-2010, AFL, all rights reserved. SLP5-30-2000 Revision E, 2010-12-28
Specifications are subject to change without notice.
SLP5-6D SM Test Kit with Wave ID, Set Reference, and Data Storage
OPM5-4D Specifications
OLS2-Dual Specifications
a
a
Optical
OPM5-4D
Calibrated Wavelengths
850, 980, 1310, 1490, 1550, 1625 nm
Optical
Wavelength
OLS2-Dual (single port)
1310 ±20 nm
1550 ±20 nm
Detector Type
Filtered InGaAs
Emitter Type
Measurement Range
+26 to -50 dBm
Tone Detect Range
+6 to -30 dBm
+6 to -25 dBm for 850 nm
+6 to -30 dBm
+6 to -25 dBm for 850 nm
± 0.25 dB
0.01 dB
dB, dBm, μW
Spectral Width (FWHM)
Laser, Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
5 nm (max)
Output Power
0 dBm c
Output Stability
±0.05 dB over 1 hour (after 15 min. warm-up)
±0.1 dB over 8 hours (after 15 min. warm-up)
Tone Output
270 Hz, 330 Hz, 1 kHz, 2 kHz
General
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 120 hours, minimum 75 hours
Available Adapters
SC FC, ST, LC
Operating Temperature
Storage Temperature
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.29 kg (0.65 lb)
Wavelength ID Range
Accuracy b
Resolution
Measurement Units
General
Power
Battery Life
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
2 AA batteries, optional AC adapter
300 hours
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.26 kg (0.58 lb)
Notes:
a. All specifications at 25°C.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
c. Adjustable 2 dB.
Ordering Information
Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles
and fiber types and adapter caps for most common connectors may be purchased from AFL.
Includes
OLS2-Dual optical light source, OPM5-4D optical power meter, AA batteries, protective rubber boots, adapter cap, USB cable,
Windows® compatible software and carry case.
AFL NO.
SLP5 -6D
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
75
© 2002-2010, AFL, all rights reserved. SLP5-30-2000 Revision E, 2010-12-28
Specifications are subject to change without notice.
SLP4 Triple Wave Test Kits with Wave ID and Set Reference
The SLP4 triple wavelength single-mode test kits are available in
two models, SLP4-FTTH and SLP4-7. The SLP4-FTTH and SLP4-7
model combine the OPM4-4D optical power meter and either
OLS7-FTTH (1310/1490/1550 nm) or OLS7-3 (1310/1550/1625
nm) laser source respectively.
The OLS7-FTTH and OLS7-3 feature a triple wavelength
laser output from a single port and are easy to operate.
Each wavelength may be transmitted individually at CW
or with user selectable modulated Tone. Also, each wavelength
may be transmitted with Wave ID. When transmitting with
Wave ID, the OLS7 will also support transmitting pairs of
wavelengths in an alternating pattern and triple wavelengths
in a sequential pattern.
Features
Associated with each operating condition, the designated
LED indicator will illuminate to identify the currently enabled
operating mode and emitted wavelength wavelength(s) along
with battery charge status and external power presence. The
OLS7-FTTH and OLS7-3 output ports are equipped with UCI
based removable adapters to allow the output connectors to
be inspected and cleaned.
•• Hand-held, rugged, lightweight
•• Wave ID (auto identification and switching)
•• Triple, dual, or single Wave ID, CW, Tone
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
•• Large LCD with backlight (OPM4-4D)
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Low battery indicator
•• Long battery life with 2 AA alkaline
•• Cost-effective, easy to use
•• N.I.S.T traceable
When used with OLS7 series light sources, the OPM4-4D offers
automatic wavelength identification and switching-Wave ID
feature that automatically detects and sets the wavelength(s),
preventing setup and measurement errors. It significantly
increases efficiency and reduces technician errors—and
saves testing time—by eliminating the need to test each
wavelength individually.
The OPM4-4D stores optical references for each calibrated
wavelength and offers multiple test tone detection for fiber
identification. The OPM4-4D optical input port accepts a variety
of NOYES thread-on style adapter caps (ordered separately) to
meet a wide range of testing requirements.
The SLP4-7 and SLP4-FTTH kits are fully N.I.S.T. traceable.
Applications
•• Passive Optical Networks (PON) testing
•• Certify single-mode links per TIA/EIA standards
•• Fiber identification prior to splicing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
76
© 2006-2011, AFL, all rights reserved. SLP4-07-2000 Revision C, 2011-01-06
Specifications are subject to change without notice.
SLP4 Triple Wave Test Kits with Wave ID and Set Reference
OPM4-4D Specifications
OLS7 Specifications
a
Optical
Calibrated Wavelengths
850, 980, 1300, 1310, 1490, 1550, 1625 nm
Detector Type
Filtered InGaAs
Measurement Range
Tone Detect Range
OPM4-4D
Accuracy b
Resolution
0.01 dB
Measurement Units
dB, dBm, μW
General
Power
2 AA batteries
Battery Life
300 hours
Operating Temperature
-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
Size (H x W x D)
Weight
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Wavelength ID Range
Optical
Model OLS7-FTTH
Model OLS7-3
Wavelength (±20 nm) 1310
1490
1550
1310
1550
1625
Emitter Type
Laser, Class I FDA 21 CFR 1040.10 and
1040.11, IEC 60825-1: 2007-03
Spectral Width
5 nm
3 nm
5 nm
5 nm
5 nm
2 nm
Output Power
-5 dBm (typical) into 9/125 fiber
Output Stability c
±0.05 dB over 1 hour
±0.1 dB over 8 hours
Tone Output
270 Hz, 330 Hz, 1 kHz, 2 kHz
General
Models OLS7-FTTH and OLS7-3
Available Adapters
SC, FC, ST, LC
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 72 hours (with one laser active),
minimum 40 hours
Operating Temperature -10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.3 kg (0.66 lb)
+26 to -50 dBm
+6 to -30 dBm
+6 to -25 for 850 nm
+6 to -30 dBm
+6 to -25 dBm for 850 nm
±0.25 dB
a
0.26 kg (0.58 lb)
Notes:
a. All specifications at 25°C.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
c. After 15-minute warm-up, after 30-second typical.
Ordering Information
Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles
and fiber types and adapter caps for most common connectors may be purchased from AFL.
Includes
OLS7-3 optical light source, OPM4-4D optical power meter, AA batteries, protective rubber boots, adapter cap and carry case.
OLS7-FTTH optical light source, OPM4-4D optical power meter, AA batteries, protective rubber boots, adapter cap and carry case.
AFL NO.
SLP4-7
SLP4-FTTH
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
77
© 2006-2011, AFL, all rights reserved. SLP4-07-2000 Revision C, 2011-01-06
Specifications are subject to change without notice.
SLP4-6D Single-mode Test Kit with Wave ID and Set Reference
The SLP4-6D test kit combines the OPM4-4D optical power
meter and OLS2-Dual laser light source and is ideally suited for
testing single-mode fiber optic networks.
The OLS2-Dual features 1310 nm and 1550 nm laser output
from a single output port and offers several modes of operation.
Each wavelength may be transmitted individually at CW or with
user selectable modulated Tone. Also, each wavelength may be
transmitted with Wave ID. When transmitting with Wave ID, the
OLS2-Dual supports transmitting pairs of wavelengths in an
alternating pattern.
Associated with each operating condition, the designated
LED indicator will illuminate to identify the currently enabled
operating mode and emitted wavelength(s) along with battery
charge status and external power presence. The OLS2-Dual
output port is equipped with a UCI based removable adapter to
allow the output connector to be
inspected and cleaned.
Features
•• Hand-held, rugged, lightweight
•• Wave ID (auto identification and switching)
•• Dual or single Wave ID, CW, Tone
•• 270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
•• Adjustable output
•• Large LCD with backlight (OPM4-4D)
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Low battery indicator
•• Long battery life with 2 AA alkaline
•• Cost-effective, easy to use
•• N.I.S.T traceable
When used with the OLS2-Dual, the OPM4-4D offers automatic
wavelength identification and switching-Wave ID feature that
automatically detects and sets the wavelength(s), preventing
setup and measurement errors. It significantly increases efficiency
and reduces technician errors—and saves testing time—by
eliminating the need to test each wavelength individually.
The OPM4-4D stores optical references for each calibrated
wavelength and offers multiple test tone detection for fiber
identification. The OPM4-4D optical input port accepts a variety
of NOYES thread-on style adapter caps (ordered separately) to
meet a wide range of testing requirements. The SLP4-6D test
kit is fully N.I.S.T. traceable.
Applications
•• Certify single-mode links per TIA/EIA standards
•• Fiber identification prior to splicing
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
78
© 2002-2010, AFL, all rights reserved. SLP4-30-2000 Revision E, 2010-12-29
Specifications are subject to change without notice.
SLP4-6D Single-mode Test Kit with Wave ID and Set Reference
OPM4-4D Specifications
OLS2-Dual Specifications
a
a
Optical
OPM4-4D
Calibrated Wavelengths
850, 980, 1300, 1310, 1490, 1550, 1625 nm
Optical
Wavelength
OLS2-Dual (single port)
1310 ±20 nm
1550 ±20 nm
Detector Type
Filtered InGaAs
Emitter Type
Measurement Range
+26 to -50 dBm
Tone Detect Range
Spectral Width (FWHM)
Output Power
0 dBm c
Output Stability
±0.05 dB over 1 hour (after 15-minute warm-up)
±0.1 dB over 8 hours (after 15-minute warm-up)
Accuracy b
+6 to -30 dBm
+6 to -25 for 850 nm
+6 to -30 dBm
+6 to -25 dBm for 850 nm
±0.25 dB
Laser, Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
5 nm (max)
Tone Output
270 Hz, 330 Hz, 1 kHz, 2 kHz
Resolution
0.01 dB
Measurement Units
dB, dBm, μW
General
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 120 hours, minimum 75 hours
Wavelength ID Range
General
Power
2 AA batteries
Available Adapters
SC FC, ST, LC
Battery Life
300 hours
Operating Temperature
-10°C to 50°C, 90 % RH (non-condensing)
Operating Temperature
Storage Temperature
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
Storage Temperature
Size (H x W x D)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.29 kg (0.65 lb)
Weight
0.26 kg (0.58 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
c. Adjustable 2 dB.
Ordering Information
Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles
and fiber types and adapter caps for most common connectors may be purchased from AFL.
Includes
OLS2-Dual optical light source, OPM4-4D optical power meter, AA batteries, protective rubber boots, adapter cap and carry case.
AFL NO.
SLP4-6D
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
79
© 2002-2010, AFL, all rights reserved. SLP4-30-2000 Revision E, 2010-12-29
Specifications are subject to change without notice.
MLP5-2 MM Test Kit with Wave ID, Set Reference and Data Storage
The MLP5-2 test kit combines the OPM5-2D optical power meter
and OLS1-Dual LED light source and is ideally suited for testing
multimode fiber optic networks.
The OLS1-Dual features 850 and 1300 nm LED output from
a single output port and is easy to operate with only a power
button and a wavelength select button. Each wavelength may be
transmitted individually at CW or with Wave ID. The OLS1-Dual
output port is equipped with UCI based removable adapters to
allow the output connectors to be inspected and cleaned.
The OPM5-2D is a full-featured, hand-held optical power
meter designed for measuring optical power in premise, telco,
or broadband networks and for performing insertion loss
measurements on multimode or single-mode fiber optic links.
The standard Wave ID feature (when used with NOYES OLS series
light sources) automatically detects and sets the wavelength(s),
preventing setup and measurement errors. It significantly
increases efficiency and reduces technician errors—and saves
testing time—by eliminating the need to test each wavelength
individually. The OPM5-2D stores optical references for each
calibrated wavelength and offers multiple test tone detection for
fiber identification.
Features
•• Hand-held, rugged, lightweight
•• Wave ID (auto identification and switching)
•• Dual or single Wave ID, CW
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Large LCD with backlight (OPM5-2D)
•• File management system organizes stored test data (OPM5-2D)
•• Storage capability > 500 fibers (OPM5-2D)
•• USB port and Windows® compatible software
for download of stored data (OPM5-2D)
•• Low battery indicator
•• Long battery life with 2 AA alkaline
•• Free 50 µm and 62.5 µm mandrels
•• Cost-effective, easy to use
•• N.I.S.T traceable
Data Storage of Test Results
The OPM5-2D File Management system allows technicians
to organize test results into multiple files and transfer stored
results via USB to a PC for analyzing, generating reports,
and printing. The supplied powerful PC Analysis and
Reporting Tool (TRM™ - Test Results Management software)
allows users to apply industry standards based rules to test
results and create comprehensive certification reports.
Users can generate network Pass/Fail results demonstrating
compliance to industry standards and illustrate headroom.
TRM is a Windows® compatible software. The MLP5-2 test kit
is fully N.I.S.T. traceable.
Applications
•• Certify multimode fiber links per TIA/EIA standards
•• The 1300 nm output can also be used to test short distance
(up to 10 km) single-mode fiber links
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
80
© 2002-2011, AFL, all rights reserved. MLP5-30-2000 Revision D, 2011-01-05
Specifications are subject to change without notice.
MLP5-2 MM Test Kit with Wave ID, Set Reference and Data Storage
Powerful Pair
The MLP5-2 loss test kit and TRM Test Results Management software are a powerful pair.
•• Increases efficiency
•• Reduces technician errors
•• Simple to operate with minimal training required
•• Provides customized professional reports
Target Markets
Anyone testing fiber links who requires report generation applications include:
•• Data networks
•• Telecommunications providers
•• CATV
•• Industrial
Wave ID Increases Efficiency and Reduces Errors
•• Enables users to test two wavelengths simultaneously
–– Significantly reduces test time by eliminating the need to test each wavelength individually
•• Automatically detects and sets received wavelengths
–– Eliminates loss measurement errors by automatically matching OPM to transmitted wavelength
Straightforward Results Storage and Easy File Management in the Field
•• Simple to use interface allows for easy separation of results into files
•• Keep cable/job results separated for fast customer report generation
•• Access to files and results allows for quick and easy retest of fibers
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
81
© 2002-2011, AFL, all rights reserved. MLP5-30-2000 Revision D, 2011-01-05
Specifications are subject to change without notice.
Upload test data files to PC via USB to utilize powerful data
management and reporting tool – TRM™
File Naming and Data Management Editor
•• Manage job information (Ends, Cable ID, Comments, and Operators) to meet documentation specifications in reports
•• Create bi-directional results
•• Combine results from multiple OPMs to create a complete job report
•• Automatic backup of data
Create Certification Results to Industry Standards (TIA/ISO/EN and applications)
•• Apply standards-based rules to loss results
•• Generate Pass/Fail information for each fiber
•• Demonstrate compliance to industry standards
Customized Reports
•• Create professional personalized reports with company logos
•• Reports meet accepted industry documentation standards
•• Save common report options for quick generation of future reports
•• Recall previously stored settings to save time generating reports for repeat customers
•• Create certification reports showing fiber Pass/Fail results based on customer/consultant specifications,
Industry Standard, and Industry Applications
•• Show headroom values for the primary rule (typically the industry standard)
•• Use PC analysis to verify if previously measured fibers (tested with NOYES loss test equipment)
meet loss requirements of Standards and Rules
Superior Customer Support
•• Dedicated customer service, technical support and field sales available to support customers
•• Knowledgeable timely technical support and customer service
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
82
© 2002-2011, AFL, all rights reserved. MLP5-30-2000 Revision D, 2011-01-05
Specifications are subject to change without notice.
MLP5-2 Multimode Test Kit with Wave ID, Set Reference and Data Storage
OPM5-2D Specifications
OLS1-Dual Specifications
a
a
Optical
OPM5-2D
Optical
OLS1-Dual (single port)
Calibrated Wavelengths
850, 1300, 1310, 1490, 1550 nm
Wavelength
850 ±30 nm
Detector Type
Germanium (Ge)
Emitter Type
Measurement Range
+6 to -60 dBm
Tone Detect Range
+6 to -50 dBm
+6 to -45 dBm for 850 nm
+6 to -50 dBm
+6 to -45 dBm for 850 nm
±0.25 dB
0.01 dB
dB, dBm, μW
Wavelength ID Range
Accuracy b
Resolution
Measurement Units
General
Power
Battery Life
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
1300 +50/-10 nm
Spectral Width
LED, Class I FDA 21 CFR 1040.10 and
1040.11, IEC 60825-1: 2007-03
40 nm (typ)
120 nm (typ)
Output Power
>-20 dBm c
Output Stability
±0.1 dB over 8 hours (after 5-minute warm-up)
Fiber Size
62.5 µm d
General
2 AA batteries, optional AC adapter
300 hours
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.26 kg (0.58 lb)
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 30 hours, minimum 20 hours
Available Adapters
SC, FC, ST
Operating Temperature -10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.29 kg (0.65 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
c. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
d. May be used to test 50 or 62.5 μm fiber with supplied mandrels.
Ordering Information
Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles
and fiber types and adapter caps for most common connectors may be purchased from AFL.
Includes
OLS1-Dual optical light source, OPM5-2D optical power meter, AA batteries, protective rubber boots, adapter cap, USB cable,
Windows® compatible software, 50 and 62.5 µm mandrels and carry case.
AFL NO.
MLP5-2
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
83
© 2002-2011, AFL, all rights reserved. MLP5-30-2000 Revision D, 2011-01-05
Specifications are subject to change without notice.
MLP4-2 Multimode Test Kit with Wave ID and Set Reference
The MLP4-2 test kit combines the OPM4-2D optical power meter
and OLS1-Dual LED light source and is ideally suited for testing
multimode fiber optic networks.
The OLS1-Dual features 850 and 1300 nm LED output from
a single output port and is easy to operate with only a power
button and a wavelength select button. Each wavelength may
be transmitted individually at CW or with Wave ID. When
transmitting with Wave ID, the OLS1-Dual supports transmitting
pairs of wavelengths in an alternating pattern. Associated with
each operating condition, the designated LED indicator will
illuminate to identify the currently enabled operating mode and
emitted wavelength(s) along with battery charge status and
external power presence. The OLS1-Dual output port is equipped
with UCI based removable adapters to allow the output
connectors to be inspected and cleaned.
Features
•• Hand-held, rugged, lightweight
•• Wave ID (auto identification and switching)
•• Dual or single Wave ID, CW
•• Large LCD with backlight (OPM4-2D)
•• Power measurements in dBm or μW; insertion loss in dB
•• Reference power level storage
•• Low battery indicator
•• Long battery life with 2 AA alkaline
•• Free 50 µm and 62.5 µm mandrels
•• Cost-effective, easy-to-use
•• N.I.S.T traceable
When used with the OLS1-Dual, the OPM4-2D offers automatic
wavelength identification and switching-Wave ID feature that
automatically detects and sets the wavelength(s), preventing
setup and measurement errors. It significantly increases efficiency
and reduces technician errors—and saves testing time—by
eliminating the need to test each wavelength individually.
The OPM4-2D stores optical references for each calibrated
wavelength and offers multiple test tone detection for fiber
identification. The OPM4-2D optical input port accepts a variety
of NOYES thread-on style adapter caps (ordered separately) to
meet a wide range of testing requirements. The MLP4-2 test kit is
fully N.I.S.T. traceable.
Applications
•• Certify multimode fiber links per TIA/EIA standards
•• The 1300 nm output can also be used to test short distance
(up to 10 km) single-mode fiber links
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
84
© 2002-2011, AFL, all rights reserved. MLP4-30-2000 Revision D, 2011-01-05
Specifications are subject to change without notice.
MLP4-2 Multimode Test Kit with Wave ID and Set Reference
OPM4-2D Specifications
OLS1-Dual Specifications
a
a
Optical
OPM4-2D
Optical
OLS1-Dual (single port)
Calibrated Wavelengths
850, 1300,1310, 1490, 1550 nm
Wavelength
850 ±30 nm
Detector Type
Germanium (Ge)
Emitter Type
Measurement Range
+6 to -60 dBm
Tone Detect Range
Accuracy d
+6 to -50 dBm
+6 to -45 for 850 nm
+6 to -50 dBm
+6 to -45 dBm for 850 nm
±0.25 dB
Resolution
0.01 dB
Measurement Units
dB, dBm, μW
Wavelength ID Range
1300 +50/-10 nm
Spectral Width
LED, Class I FDA 21 CFR 1040.10 and
1040.11, IEC 60825-1: 2007-03
40 nm (typ)
120 nm (typ)
Output Power
>-20 dBm b
Output Stability
±0.1 dB over 8 hours (after 5-minute warm-up)
Fiber Size
62.5 µm c
General
General
Power
2 AA batteries
Battery Life
300 hours
Operating Temperature
-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
Size (H x W x D)
-30°C to 60°C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.26 kg (0.58 lb)
Power
2 AA batteries, optional AC adapter
Battery Life
Typical 30 hours, minimum 20 hours
Available Adapters
SC, FC, ST
Operating Temperature -10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight
0.29 kg (0.65 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
c. May be used to test 50 or 62.5 μm fiber with supplied mandrels.
d. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
Ordering Information
Test jumpers and connector adapters are required for operation (purchased separately). Test jumpers with a variety of connector styles
and fiber types and adapter caps for most common connectors may be purchased from AFL.
Includes
OLS1-Dual optical light source, OPM4-2D optical power meter, AA batteries, protective rubber boots, adapter cap, 50 and 62.5 µm mandrels,
and carry case.
AFL NO.
MLP4-2
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
85
© 2002-2011, AFL, all rights reserved. MLP4-30-2000 Revision D, 2011-01-05
Specifications are subject to change without notice.
MLP1 Multimode Loss Test Kit
MLP1 test kits are inexpensive solutions for testing multimode systems. By joining the
OPM1 optical power meter and the OLS1 optical light source, the MLP1 is a great kit for
beginners or network owners. Two versions of the MLP1 test kit are available for testing
Premises networks, LAN, and Gigabit Ethernet.
MLP1-1S test kit includes the OPM1-2C power meter and OLS1-1C (660, 850 nm) light
source. Good test kit with visible 660 nm source for Plastic Optical Fiber (POF).
MLP1-2 test kit combines the OPM1-2C optical power meter and OLS1-2C (850,
1300 nm) optical light source. Basic multimode test kit for light use.
Included 50 and 62.5 µm fiber mandrels for certifying both 50 and 62.5 µm fiber links
for current and planned high bit rate applications including Gigabit Ethernet and 10
Gigabit Ethernet. Mandrels apply to launch jumpers is seconds without tools and ensure
loss measurements comply with TIA/EIA-568-B standard.
Feature
•• Hand-held, rugged, lightweight
•• Test multimode networks
•• Loss measurements at 850 and 1300 nm
•• Includes 50 and 62.5 µm mandrels
•• Field portable, battery operated
•• Certify 50 or 62.5 µm multimode fiber links for any 850 or 1300 nm application,
including Gigabit Ethernet (GBE)
•• N.I.S.T. traceable
Applications
•• Certify 50 and 62.5 µm fiber links for 850/1300 nm
•• Certify single-mode links per TIA/EIA standards
•• Passive Optical Networks (PON) testing
Ordering Information
Includes
Optical light source, optical power meter, protective rubber boots, adapter cap,
50 and 62.5 µm mandrels, user’s guide, and carrying case.
afL NO.
All MLP1 models
Test jumpers and connector adapters are required for operation (purchased separately).
Test jumpers with a variety of connector styles and fiber types are available.
Adapter caps for most common connectors may be purchased from AFL.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
86
© 2002-2011, AFL, all rights reserved. MLP1-01-2000 Revision R, 2011-06-29
Specifications are subject to change without notice.
MLP1 Multimode Loss Test Kit
Specifications
a
Model
Optical Light Source
Output Ports
Output Wavelength
MLP1-1S
OLS1-1C
2
660 nm - red 850 + 35/-40nm
MLP1-2
OLS1-2C
2
850 + 35/-40 nm 1300 + 50/-10 nm
Spectral Width (typ) (FWHM)
30 nm
40 nm
40 nm
120 nm
Output Power
-10 dBm b
>20 dBm
-20 dBm
>20 dBm
Stability (@25°C, 5-minute warm-up)
0.1 dB over 8 hours
Fiber Size
Emitter Type
Power
Connector
Size (H x W x D)
1000 µm, 62.5 µm c
62.5 µm c
LED, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Typical 60 hours with 9V battery, optional AC adapter
ST
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.1 dB over 8 hours
Weight
0.65 lb (.29 kg)
Optical Power Meter
Calibration Wavelength
OPM1-2C
850, 1300, 1310, 1550 nm
Detector Type
Germanium (Ge)
Dynamic Range
+6 to -60 dBm
Accuracy (@ 25°C & -10.0 dBm)
Measurement Units
Power
Adapter Caps
±0.25 dB
dBm
Typical 60 hours with 9V battery
order separately (ST, SC, FC, and others available)
Size (H x W x D)
Weight
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.58 lb (0.26 kg)
General Kit Specifications
Dynamic Range: Multimode ( 62.5/125 µm),
Single-mode ( 9/125 µm)
Weight
Dimensions (H x W x D)
Operating Temperature
Storage Temperature
MLP1-1S
40 dB @ 850 nm
MLP1-2
40 dB @ 850 & 1300 nm
20 dB @ 1300 nm
2. 9 lbs (1.3 kg)
23.4 x 34 x 10.7 cm (9.2 x 13.4 x 4.2 in)
-10°C to 50°C
-30°C to 60°C
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. -10 dBm output is into 1000 micron fiber.
b. May be used to test 50 or 62.5 μm fiber with supplied mandrels.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
87
© 2002-2011, AFL, all rights reserved. MLP1-01-2000 Revision R, 2011-06-29
Specifications are subject to change without notice.
CKSM-2 Contractor Series MM/SM Test Kit with Set Reference
Combining the CSM1-2 optical power meter, CSS1-MM Dual LED light source, and
CSS1-SM Dual laser source, the CKSM-2 is a cost-effective test kit designed for
performing insertion loss measurements on multimode as well as single-mode fiber optic
links. Weighing only 0.4 lb each, units are compact and convenient for field use.
The CSS1-MM and CSS1-SM sources feature Dual output, 850/1300 nm LED or
1310/1550 nm laser respectively, from a single output port. Both CSS1 models offer 2
modes of operation, continuous wave (CW) and user selectable modulated Tone. The
CSS1-MM LED and CSS1-SM Laser output ports are stabilized to ensure accurate test
results per current TIA/EIA requirements. A large LCD display with backlight shows
emitted wavelengths (nm), tone frequency (Hz), and indicates a low battery condition.
The CSS1-MM model output port is equipped with a fixed SC connector while the
CSS1-SM output port is equipped with Universal Connector Interface (UCI) base
and SC adapter.
Features
•• Palm-sized, rugged, lightweight
•• CW and modulated Tone
•• 270, 330, 1000, and 2000 Hz Tone
•• Power measurements in dBm or μW;
insertion loss in dB
•• Reference power level storage
•• Large LCD with backlight
•• Automatic power-off function
•• Battery gauge
•• Long battery life with AA alkaline
•• Free 50 µm and 62.5 µm mandrels
•• Cost-effective, easy to use
•• N.I.S.T traceable
Applications
•• Certify multimode and single-mode
fiber links per TIA/EIA standards
•• Fiber identification prior to splicing
The CSM1-2 optical power meter operates at 850/1300/1310/1550 nm and features
multiple test Tone detection for fiber identification. The CSM1-2 stores optical references
for each calibrated wavelength. A large LCD display with backlight shows measured
power (dBm or µW) or insertion loss (dB), calibrated wavelengths (nm), tone frequency
(Hz), and indicates a low battery condition. The CSM1 optical input port accepts a
variety of NOYES thread-on style adapter caps (ordered separately) to meet a wide range
of testing requirements. One adapter cap, 2.5 mm Universal, is included.
The CSS1-MM, CSS1-SM, and CSM1-2 are fully N.I.S.T. traceable.
Ordering Information
Includes
CSS1-MM Dual LED Source, CSS1-SM Dual Laser souce, CSM1-2 optical power meter,
AA batteries, 2.5 mm universal adapter cap, UCI-SC connector, 50 and 62.5µm mandrels,
users guide, and carry case.
AFL NO.
CKSM-2
Test jumpers and connector adapters are required for operation (purchased separately).
Test jumpers with a variety of connector styles and fiber types and adapter caps for most
common connectors may be purchased from AFL.
The CKSM kits may be packed with one of cleaning kit options (purchased separately) as
follows:
Description
Wet Cleaning Kit
Dry Cleaning Kit
Includes
8500-10-0016, Cletop -SB
CCTS-25-0900
Connector Cleaning Tips for 2.5 mm ferrule in adapters or sockets
(SC, FC, ST in adaptors). Blue (40 sticks per tube). Qty = 2 tubes
FCC2-00-0900,
Optical Quality Cleaning Fluid for fiber connector end-faces.
8500-10-0016, Cletop -SB
8500-10-0024 ACT-01 2.5 mm adapter cleaning tips – Qty = 200
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
88
AFL NO.
8500-20-0900
8500-20-0901
© 2006-2011, AFL, all rights reserved. CKSM-20-2000 Revision D, 2011-07-29
Specifications are subject to change without notice.
CKSM-2 Contractor Series MM/SM Test Kit with Set Reference
CSS1-SM Specifications
CSS1-MM Specifications
a
a
Optical
CSS1-SM (single port)
Optical
CSS1-MM (single port)
Output Wavelength
1310 nm ±20 nm, 1550 nm ±20 nm
Output Wavelength
850 nm ±20 nm
1300 nm +40/-60 nm
Spectral Width (max)
5 nm
Spectral Width (max)
35 nm
170 nm
Output Power
Emitter Type
Output Stability
Tone Output
0.0 dBm into 9/125 fiber
Output Power
Laser, Class I FDA 21 CFR 1040.10 and 1040.11,
IEC 60825-1: 2007-03
±0.05 dB typical over 1 hour (after 30-second )
±0.15 dB over 8 hours (after 30-second typically)
Emitter Type
270, 330, 1000, 2000 Hz
Tone Output
Output Stability
General
-20.0 dBm into 62.5/125 fiber
LED, Class I FDA 21 CFR 1040.10 and 1040.11, IEC
60825-1: 2007-03
±0.1 dB over 1 hour (after 30 sec typically)
±0.15 dB over 8 hours (after 30 sec typically)
270, 330, 1000, 2000 Hz
General
Output Connector
SC, FC, ST, LC
Output Connector
SC
Power
2 AA batteries
Power
2 AA batteries
Battery Life
75 hours typical
Battery Life
30 hours typical
Operating Temperature -10°C to 50°C, 90 % RH (non-condensing)
Operating Temperature -10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Storage Temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
11.4 x 6.4 x 3.2 cm (4.5 x 2.5 x 1.3 in)
Size (H x W x D)
11.4 x 6.4 x 3.2 cm (4.5 x 2.5 x 1.3 in)
Weight
0.18 kg (0.4 lb)
Weight
0.18 kg (0.4 lb)
CSM1-2 Specifications
Optical
a
CSM1-2
Calibrated Wavelengths 850, 1300, 1310, 1550 nm
Detector Type
Measurement Range
Germanium (Ge)
+6 to -60 dBm
Tone Detect Range
Accuracy b
+6 to -50 dBm; +6 to -45 dBm for 850 nm
±0.3 dB
Resolution
0.01 dB
Measurement Units
dB, dBm, μW
General
Power
Battery Life
2 AA batteries
>300 hours
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
11.4 x 6.4 x 3.2 cm (4.5 x 2.5 x 1.3 in)
0.18 kg (0.4 lb)
Notes:
a. All specifications at 25°C.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
89
© 2006-2011, AFL, all rights reserved. CKSM-20-2000 Revision D, 2011-07-29
Specifications are subject to change without notice.
CKM-2 Contractor Series Multimode Test Kit with Set Reference
Combining the CSM1-2 optical power meter and CSS1-MM Dual LED light source, the
CMK-2 is a cost-effective test kit designed for performing insertion loss measurements
on multimode fiber optic links. Weighing only 0.4 lb each, both units are compact and
convenient for field use.
Features
•• Palm-sized, rugged, lightweight
•• CW and modulated Tone
•• 270, 330, 1000, 2000 Hz Tone
•• Power measurements in dBm or μW;
insertion loss in dB
•• Reference power level storage
•• Large LCD with backlight
•• Automatic power-off function
•• Battery gauge
•• Long battery life with AA alkaline
•• Free 50 µm and 62.5 µm mandrels
•• Cost-effective, easy to use
•• N.I.S.T traceable
Applications
•• Certify 50 or 62.5 µm multimode
fiber links for any 850 or 1300 nm
application, including Gigabit Ethernet
(GBE), per TIA/EIA standards
•• Fiber identification prior to splicing
The CSS1-MM Dual light source features 850 nm and 1300 nm LED output from a single
output port and offers 2 modes of operation, continuous wave (CW) and user selectable
modulated Tone. The LED output is stabilized to ensure accurate test results per current
TIA/EIA requirements and equipped with a fixed SC connector. A large LCD display with
backlight shows emitted wavelengths (nm), tone frequency (Hz), and indicates a low
battery condition.
The CSM1-2 optical power meter operates at 850/ 1300/ 1310/ 1550 nm and features
multiple test Tone detection for fiber identification. The CSM1-2 stores optical references
for each calibrated wavelength. A large LCD display with backlight shows measured
power (dBm or µW) or insertion loss (dB), calibrated wavelengths (nm), tone frequency
(Hz), and indicates a low battery condition. The CSM1 optical input port accepts a
variety of NOYES thread-on style adapter caps (ordered separately) to meet a wide
range of testing requirements. One adapter cap, 2.5 mm Universal, is included.
Both units offer a five-minute auto-off feature and long battery life from common
AA alkaline batteries. The CSM1-2 and CSS1-MM are fully N.I.S.T. traceable.
Ordering Information
Includes
CSS1-MM dual optical light source, CSM1-2 optical power meter, AA batteries,
2.5 mm universal adapter cap, 50 and 62.5 µm mandrels, users guide, and carry case.
afl nO.
CKM-2
Test jumpers and connector adapters are required for operation (purchased separately).
Test jumpers with a variety of connector styles and fiber types and adapter caps for most
common connectors may be purchased from AFL.
The CKM-2 kits may be packed with one of cleaning kit options (purchased separately)
as follows:
Description
Wet Cleaning Kit
Dry Cleaning Kit
Includes
8500-10-0016, Cletop -SB
CCTS-25-0900
Connector Cleaning Tips for 2.5 mm ferrule in adapters or sockets
(SC, FC, ST in adaptors). Blue (40 sticks per tube). Qty = 2 tubes
FCC2-00-0900,
Optical Quality Cleaning Fluid for fiber connector end-faces.
8500-10-0016, Cletop -SB
8500-10-0024 ACT-01 2.5 mm adapter cleaning tips – Qty = 200
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
90
afl nO.
8500-20-0900
8500-20-0901
© 2006-2011, AFL, all rights reserved. CKM2-00-2000 Revision D, 2011-07-12
Specifications are subject to change without notice.
CKM-2 Contractor Series Multimode Test Kit with Set Reference
CSS1-MM Specifications
a
Optical
CSS1-MM (single port)
Output wavelength
850 nm ±20 nm
1300 nm +40/-60 nm
Spectral width (max)
35 nm
170 nm
Output power
-20.0 dBm into 62.5/125 fiber
Emitter type
LED, Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Output stability
Tone output
±0.1 dB over 1 hour (after 30 sec typically), ±0.15 dB over 8 hours (after 30 sec typically)
270, 330, 1000, 2000 Hz
General
Output connector
SC
Power
2 AA batteries
Battery life
30 hours typical
Operating temperature
-10°C to 50°C, 90 % RH (non-condensing)
Storage temperature
-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)
11.4 x 6.4 x 3.2 cm (4.5 x 2.5 x 1.3 in)
Weight
0.18 kg (0.4 lb)
CSM1-2 Specifications
a
Optical
CSM1-2
Calibrated Wavelengths
850, 1300, 1310, 1550 nm
Detector Type
Germanium (Ge)
Measurement Range
+6 to -60 dBm
Tone Detect Range
Accuracy b
+6 to -50 dBm; +6 to -45 dBm for 850 nm
±0.3 dB
Resolution
0.01 dB
Measurement Units
dB, dBm, μW
General
Power
Battery Life
2 AA batteries
>300 hours
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
-10°C to 50°C, 90 % RH (non-condensing)
-30°C to 60°C, 90 % RH (non-condensing)
11.4 x 6.4 x 3.2 cm (4.5 x 2.5 x 1.3 in)
0.18 kg (0.4 lb)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
91
© 2006-2011, AFL, all rights reserved. CKM2-00-2000 Revision D, 2011-07-12
Specifications are subject to change without notice.
VFI2 and HiLite Visual Fault Identifiers
The NOYES VFI2 and HiLite visible red laser sources from AFL are designed to
troubleshoot faults on fiber optic cables. Light generated by these units will escape from
sharp bends and breaks in jacketed or bare fibers, as well as poorly-mated connectors.
They can quickly identify faults in fiber optic jumper cables, distribution frames, patch
panels, and splice trays.
The HiLite and VFI2 are an excellent complement to an OTDR because they can locate
faults inside the OTDR’s dead-zone. Other applications include end-to-end continuity
checks, identifying connectors in patch panels and fibers during splicing operations.
Trace cables in messy or undocumented setups. A VFI unit provides a quick means
of finding the “other end” from amongst cluttered cables. Simply connect the VFI
to one end and look for the visual red light transmitted out the opposite connector.
•HiLite
is a miniature key-chain mountable (key chain included)
fault locating tool.
•VFI2
VFI2 Visual Fault Identifier
is a larger hand-sized package offering longer battery runtime.
Fiber Coupled Lasers for Best Test Results: NOYES VFI2 units deliver 1 mW of output
power into 9/125 single-mode fiber to ensure long range and exceptional brightness
for locating defects in single-mode and multimode fibers.
The VFI2 and HiLite units use a threaded connector adapter interface to support adapter
removal for connector cleaning and field changing of adapter styles.
•2.5
mm adapter accepts PC and angled connectors FC, SC, ST, etc.
•1.25
mm adapter accepts LC and MU connectors.
A Visible Fault Indicator (VFI) is an essential tool for fiber technicians.
Features
VFI2 Visual Fault Identifier
•• Visible red laser source, 650 nm
•• High power, 1 mW into 9/125 single-mode fiber
•• Compact size
•• Universal connector interface for quick connection
•• 2.5 mm Universal adapter included
•• 1.25 mm Universal adapter available
Applications
•• Identify fiber faults inside OTDR deadzone
•• Identify sharp bends or breaks in fibers
•• Identify poorly mated connectors
•• Verify AFL FAST™ Connector Installation
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
92
© 2002-2012, AFL, all rights reserved. VFI3-00-2000 Revision N, 2012-01-27
Specifications are subject to change without notice.
VFI2 and HiLite Visual Fault Identifiers
Specifications
Optical
a
Emitter Type
VFI2
HiLite
Laser, Class II FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1:2007-03
Wavelength
650 nm ±20 nm
Output Power
1 mW (into single-mode fiber)
Modulation
General
2 Hz or CW selected
Adapter
2.5 mm Universal, 1.25 mm Universal
Power
2 AA alkaline batteries (60 hours typical)
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
-10°C to 50°C, 85 % humidity non condensing
-30°C to 60°C, 95 % humidity non condensing
14.0 x 6.2 x 3.2 cm (5.5 x 2.4 x 1.3 in)
7.0 x 3.6 x 1.5 cm (2.8 x 1.4 x 0.6 in)
<200 g (7.06 oz)
50 g (1.75 oz)
2 Hz
1 AAA alkaline battery (16 hours typical)
Ordering Information
VFI2 Models
Description
VFI2 visual fault identifier with 2.5 mm adapter
AFL No.
VFI2-00-0900PR
VFI2 visual fault identifier with 2.5 mm and 1.25 mm adapters
VFI2-01-0900PR
HiLite Models
Description
AFL No.
HiLite visual fault identifier with 2.5 mm adapter
VFI3-00-0900PR
HiLite visual fault identifier with 2.5 mm and 1.25 mm adapters
VFI3-01-0900PR
Adapters
Description
2.5 mm Universal adapter b with captivated sleeve
AFL No.
2900-50-0007MR
1.25 mm Universal adapter c with captivated sleeve
2900-50-0010MR
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. 2.5 mm Universal adapter accepts SC, FC, ST, E2000 ferrules.
c. 1.25 mm Universal adapter accepts LC, MU ferrules.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
93
© 2002-2012, AFL, all rights reserved. VFI3-00-2000 Revision N, 2012-01-27
Specifications are subject to change without notice.
MT Tracer
12-Fiber Visible Laser Source and Display
The MT Tracer is a compact multi-fiber visual fault identifier (red laser source) supporting
8 or 12 fiber MTP® connections. The user simply connects the 12-fiber cable directly
to the unit. Fibers can be tested individually or all at once. By progressing sequentially
through the fibers, cables can be quickly checked for polarity by verifying the proper
order at the output.
Features
•• Eye-safe viewing
•• CW or 2 Hz output
•• Direct connect – No fan-outs necessary
•• Test 8 and 12 fiber MTP assemblies
•• Test polarity, continuity and
fiber mismatch
The MT Tracer Display is a passive optical device designed to receive the light from
the MT Tracer Source and provide an eye-safe method of viewing the red light.
Identification is accomplished by expanding the output of the MT ferrule to a large,
easy to read panel–large enough to be read from several feet away.
Specifications
MT Tracer Source Specifications
Optical Wavelength
650 ±10 nm
Output Power Level
Optical Connector
Minimum 0.5 mW, typical 1.0 mW
(at each SM 9/125 fiber at the end of MTP patchcord)
MTP male SM, angled
Number of Output Fibers
12
Power
2 AA alkaline batteries, optional AC adapter
Battery Life (alkaline)
40 hours
Low Battery
Indicated by 2 Hz LED blinking
Operation Temperature
0°C to 40°C, RH 85 % non-condensing
Storage Temperature
-30°C to 50°C, RH 95 % non-condensing
Dimensions
9.9 x 3.8 x 14.3 cm (3.9 x 1.5 x 5.6 in)
Weight
0.29 kg (0.63 lb)
MT Tracer Display Specifications
Input Connector
MTP angled male 62.5 µm fiber
No. of input Connectors
1 (12-fiber MTP)
Power Consumption
N/A
Operation Temperature
0°C to 40°C. RH 85 % non-condensing
Storage Temperature
-30°C to 50°C, RH 95 % non-condensing
Dimensions
9.9 x 3.8 x 14.3 cm (3.9 x 1.5 x 5.6 in)
Weight
0.18 kg (0.4 lb)
Ordering Information
Includes
MT Tracer Source, MT Tracer Display, batteries, instruction card, and carry case.
AFL NO.
MT Tracer Kit
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
94
© 2002-2011, AFL, all rights reserved. TRCR-00-2000 Revision D, 2011-08-11
Specifications are subject to change without notice.
OFI-FTTx Active ONT Detector
The OFI-FTTx is a rugged, hand-held optical fiber identifier designed to identify the
presence or absence of an active Optical Network Terminal (ONT) on FTTx F2 fibers
at the Fiber Distribution Hub (FDH). During a test the F2 fiber does not have to be
removed from service. Thus the OFI-FTTx can verify whether a splitter pigtail at the
FDH is connected to an active circuit before it is disconnected for fault location or re-use.
The OFI-FTTx can help verify FTTx network records and recover splitter pigtails and F2
fibers that are connected at the FDH but, in fact, are available for new customers.
When applied to a splitter pigtail at the FDH, the OFI-FTTx will report either that the
ONT is ‘Active’ or ‘Not Detected’. Time to complete each test is typically one second.
The OFI-FTTx is compatible with 2 mm jumper cable containing standard single-mode
fiber, such as SMF-28e®, or bend insensitive fiber (BIF) with a 15 mm bend radius
specification, such as AFL Bend Insensitive.
The OFI-FTTx is powered by two standard AA alkaline batteries, provides a low battery
indication and can typically be operated 800 times before battery replacement is necessary.
OFI-FTTx Active ONT Detector
U.S. Patent 7916983
Features
•• Rugged, hand-held, lightweight
•• In-service detection of upstream (1310 nm) activity on FTTx networks
•• Determines which unparked splitter pigtails are connected to ONTs
•• Does not require travel to customer (ONT) site
•• Does not require disconnect of splitter pigtails
•• Visual and audible indicators
•• Battery operated
•• Low battery indication
Applications
•• FACILITY RECOVERY:
Harvest unparked splitter legs and F2 fibers not connected to subscribers
•• TROUBLE-SHOOTING:
Real-time confirmation of OLT to ONT connectivity at the FDH
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
95
© 2002-2011, AFL, all rights reserved. OFI5-10-2000 Revision F, 2011-07-19
Specifications are subject to change without notice.
OFI-FTTx Active ONT Detector
Specifications
a
Model
Network Types
OFI-FTTx
FTTx BPON, GPON, EPON, ≥1:4 splitter ratio
Network Locations
Fiber Type
Induced Loss (typ.)
Test Time (typ.)
Operating Range b
Between splitter and customer ONT
2 mm jacketed SMF-28e®, 15 mm bend radius AFL Bend Insensitive, and equivalents
<1 dB @ 1550 nm
1 sec
Loss from ONT to FDH: 0 to 7 dB (BPON), 0 to 9 dB (GPON, EPON)
User-interface
Audio indicator and four red LEDs
Power
2 AA batteries
Battery Life
800 tests typical
Operating Temperature
-10°C to 40°C
Storage Temperature
-20°C to 50°C
Dimensions (H x W x D) 22 x 3.8 x 3.2 cm (8.5 x 1.5 x 1.25 in)
Weight
0.23 kg (0.5 lbs)
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Maximum values are typical and depend on fiber type and jacket material.
Ordering Information
Includes
OFI-FTTx, users guide and carry case
Afl no.
OFI-FTTx
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
96
© 2002-2011, AFL, all rights reserved. OFI5-10-2000 Revision F, 2011-07-19
Specifications are subject to change without notice.
OFI-400 Series
Optical Fiber Identifiers
NOYES OFI-400 Optical Fiber Identifiers are designed to detect
and measure 1 the core power levels of optical signals on singlemode optical fiber without disconnecting or cutting the fiber.
These instruments are simply clamped onto a fiber and indicate
the presence and direction of traffic, continuous test signals
and modulated test tones. This permits network personnel to
easily and quickly identify a specific fiber without risk of revenue
service disruption. The NOYES OLS7, OLS2, CSS1-SM and
CSS1-MM series of optical light sources are ideal companions
for the OFI-400 optical fiber identifiers.
No Adapters to Purchase, Store, Swap, or Misplace
OFI-400
OFI-400C
The OFI-400 uses a unique optical head design featuring a
two-position plunger that enables it to be used with 250 µm,
900 µm and ribbon fiber or 2 mm and 3 mm jacketed fiber. Other
brands of optical fiber identifiers require users to purchase, store
and swap out optical plungers each time a different type of fiber
is tested. The OFI-400 optical head induces a safe, repeatable
macro-bend to the fiber that allows a small amount of light to
escape for analysis. The insertion loss induced by the macro-bend
is too small to affect the signal on the fiber and the integrity of
the fiber is unaffected by the measurement process.
OFI-400HP
Features
•• Unique optical head with two-position plunger
for use with all fiber types
•• Built-in power meter with Set Reference feature
•• Low insertion loss for in-service ID tasks
•• Indicates direction of traffic
•• Detects 270 Hz, 330 Hz, 1 kHz, 2 kHz test tones 2
•• High Power detection (OFI-400HP model)
•• Powered by AAA batteries
•• Automatic power down feature and battery gauge
•• Built-in self-test
•• One-hand operation
•• Hand-held and lightweight
•• Rugged, drop-proof construction
•• Three-year calibration interval
NOYES OFI-400 instruments are designed to be simple, easyto-use and reliable. Each features an ergonomically designed
macro-bend trigger that is comfortable to use. An integrated,
backlit LCD display allows OFI-400s to be used in dimly lit
spaces. Powered by 1.5 V AAA batteries, the OFI-400 can make
thousands of fiber tests before repalcing batteries.
Applications
•• Live fiber detection to avoid technician-induced outages
•• Fiber identification with CW or tone
•• Core power measurements
•• Optimized for use on 250 µm, 900 µm and ribbon fiber
or 2 mm and 3 mm jacketed fiber
Notes:
1. Core power measurement accuracy is influenced by fiber type, coating
material, jacket composition/hardness/color, temperature and other factors.
2. Requires compatible light source.
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
97
© 2004-2011, AFL, all rights reserved. OFI4-00-2000, Revision 1A, 2011-10-14
Specifications are subject to change without notice.
OFI-400 Series
Optical Fiber Identifiers
OFI-400
The OFI-400 is designed for use with a wide range of single-mode fibers including
250 μm (bare) coated, 900 µm buffered and ribbon fibers or 2 mm and 3 mm
jacketed fibers. The OFI-400 is ideal for network personnel involved in installation,
reconfiguration, restoration and maintenance tasks that involve bare, buffered, jacketed
or ribbon fibers in outside plant pedestals, fiber cabinets, aerial enclosures and inside
plant premises demarcation cabinets. The slim design of the OFI-400 head facilitates
access in crowded splice trays.
OFI-400C
Designed specifically for use with 2 mm or 3 mm jacketed single-mode fibers,
the OFI-400C is ideal for general purpose maintenance, configuration and installation
tasks. The OFI-400C is functionally equivalent to the OFI-400 but includes an optical
head design and a calibration scheme optimized for use with jacketed fiber.
OFI-400HP
The OFI-400HP is designed for use where high levels of optical power are present. This
includes fibers carrying a single high-power signal, CWDM or DWDM signals with high
total power levels, amplified optical signals, or pump lasers associated with EDFA or
Raman amplifiers.
When the detected power levels are above +23 dBm (200 mW) and display reaches
+23 dBm (200 mW) or greater, the OFI-400HP will display High warning indication.
Ordering Information
All NOYES OFI-400 products include a user’s guide, 2 AAA batteries and a soft carry
case. Each carries a 1-year warranty and a 3-year recommended calibration interval.
Includes
Users guide, 2 AAA batteries, soft carry case
Users guide, 2 AAA batteries, soft carry case
Users guide, 2 AAA batteries, soft carry case
afl no.
OFI-400
OFI-400C
OFI-400HP
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
98
© 2004-2011, AFL, all rights reserved. OFI4-00-2000, Revision 1A, 2011-10-14
Specifications are subject to change without notice.
OFI-400 Series Optical Fiber Identifiers
Specifications
Detectable Signal Range
Parameter
FIBER TYPE a
250 μm coated fiber
Minimum level detected, average power
(SMF-28 with 250 μm CPC6 coating)
Insertion loss (typical/max)
3 mm jacketed fiber
(SMF-28/28E with 250 μm CPC6
coating and 3 mm, yellow jacket)
Minimum level detected, average power
Insertion loss (typical)
OPTICAL SPECIFICATIONS c
Detector Type
Wavelength Range
Calibrated Fiber and Wavelength
Fiber Stress
Working Fiber Size
Tone Detection
Core Power Measurement Range
Measurement Units
General Specifications
User Interface
Power
Battery Life
Operation Temperature
Storage Temperature
TEST CONDITIONS b
1310 nm, CW, Tone, Traffic
1550 nm, CW, Tone, Traffic
@ 1310 nm
@ 1550 nm
OFI-400
-45 dBm
-50 dBm
0.6 dB/0.8 dB
2.5 dB/2.6 dB
OFI-400C
N/A
OFI-400HP
N/A
N/A
N/A
1310 nm, CW, Tone, Traffic
1550 nm, CW, Traffic
1550 nm, Tone
@ 1310 nm
@ 1550 nm
-30 dBm
-33 dBm
-33 dBm
1.0 dB
2.8 dB
-35 dBm
-40 dBm
-40 dBm
1.0 dB
2.8 dB
-30 dBm
-40 dBm
-35 dBm
0.2 to 0.5 dB
0.8 to 1.3 dB
OFI-400
InGaAs
OFI-400C
InGaAs
OFI-400HP
InGaAs
800 - 1700 nm
800 - 1700 nm
800 - 1700 nm
250 µm @ 1550 nm (SMF-28/28E)
3 mm @ 1550 nm (SMF-28/28E)
3 mm @ 1550 nm (SMF-28/28E)
<100 kPSI max
<100 kPSI max
<100 kPSI max
250 µm, 900 µm, ribbon,
2 mm and 3 mm jacketed
270, 330, 1000, 2000 Hz (±5 %)
+13 to -50 dBm @ 1550 nm, 250 µm
(SMF-28/28E)
dBm, dB
2 mm and 3 mm jacketed
2 mm and 3 mm jacketed
270, 330, 1000, 2000 Hz (±5 %)
+13 to -40 dBm @ 1550 nm, 3 mm
(SMF-28/28E)
dBm, dB
270, 330, 1000, 2000 Hz (±5 %)
+33 to -40 dBm @ 1550 nm, 3 mm
(SMF-28/28E)
dBm, dB
All ofi-400 models
Multi 7 segment LCD; 3 LEDs; 1 piezo buzzer
2 x 1.5 V AAA alkaline
>10,000 operations typical
0°C to 50°C 90 % RH (Non-condensing)
-30°C to +60°C 90 % RH (Non-condensing)
Dimensions (H x W x D)
22 x 3.8 x 2.8 cm (8.5 x 1.5 x 1.1 in)
Weight
168 g (6 oz)
Notes:
a. 250 µm coated fiber parameters are specified with OFI plunger in the “250 / 900 / RIB” position.
2 mm / 3 mm jacketed fiber parameters are specified with OFI plunger in the “2 mm / 3 mm” position.
b. CW is a light signal that is not modulated.
Traffic is a light signal modulated by high speed user data.
Tone is a light signal modulated into a nominal 50 % duty cycle square wave.
c. Unless noted otherwise, all specifications are typical.
Actual results can vary by several dB depending on fiber type, coating material, jacket color, jacket hardness, and other factors.
All specifications stated above are as measured at 25°C.
FIBER SYSTEM
YES
S
NO
ISO
9001
CERTIFIED
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
99
© 2004-2011, AFL, all rights reserved. OFI4-00-2000, Revision 1A, 2011-10-14
Specifications are subject to change without notice.
OFI-200 Optical Fiber Identifier
NOYES Optical Fiber Identifiers are rugged, hand-held, and easy-to-use fiber optic test
instruments designed to detect optical signals transmitted through a single-mode fiber
without disrupting traffic. During installation, maintenance, rerouting or restoration, it is
often necessary to isolate a specific fiber. By simply clamping an Optical Fiber Identifier
onto a gently-bent fiber, the unit will indicate if there is [No Signal], [Tone], or [Traffic]
and identify signal direction.
The OFI-200 model is equipped with a unique two-position head design that can be
configured to work with 250 µm, 900 µm, ribbon or jacketed fiber in seconds, without
tools or adjustments. When testing coated fibers, the slim design of the OFI-200 allows
easier access on a splice tray where the amount of work space is limited. The clamping
trigger is ergonomically designed to fit the natural motion of the operator’s hand.
A high-impact molded plastic case makes the OFI-200 suitable for use outside plant
or in the central office.
OFI-200
The OFI-200 is battery operated with a battery indication feature and performs
thousands of tests before battery replacement is necessary.
Features
•• Rugged, hand-held, lightweight
•• Accepts 250 µm, 900 µm coated fiber, 3 mm jacketed fiber cable and ribbon fiber
•• No head swapping or adjustments
•• Identifies light carrying fiber and indicates direction of traffic
•• Low insertion loss, traffic remains uninterrupted
•• Indicates Tone signal visually and audibly
•• 2 kHz Tone detection
•• Low battery indication
Applications
•• Live fiber identification - used during installation, maintenance, rerouting or restoration
to positively identify fibers prior to cutting and splicing
•• Tone detection
Ordering Information
Includes
Users guide and carry case
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
100
afl no.
OFI-200D
© 2002-2011, AFL, all rights reserved. OFI1-11-2000, Revision C, 2011-10-14
Specifications are subject to change without notice.
OFI-200 Optical Fiber Identifier
Specifications
Detectable Signal Range
Fiber Type a
250 μm coated fiber
(SMF-28 with 250 μm CPC6 coating)
Parameter
Minimum level detected,
average power
TEST CONDITIONS b
1310 nm, CW or Traffic
1310 nm, Tone
1550 nm, CW or Traffic
1550 nm, Tone
OFI-200D
-40 dBm
-43 dBm
-45 dBm
-50 dBm
Insertion loss (typical/max)
1310 nm
1550 nm
0.6 dB
2.5 dB
1310 nm, CW or Traffic
1310 nm, Tone
1550 nm, CW or Traffic
1550 nm, Tone
-30 dBm
-32 dBm
-33 dBm
-37 dBm
1310 nm
1550 nm
0.8 dB
2.5 dB
3 mm jacketed fiber
Minimum level detected,
(SMF-28 with 250 μm CPC6 coating and average power
3 mm, yellow jacket)
Insertion loss (typical)
Optical Specifications c
Model
Detector Type
OFI-200D
InGaAs
Wavelength Range
800 - 1700 nm
Calibrated Size of Fiber and Wavelength
N/A
Fiber Stress
<100 kPSI max
Fiber Size
Tone Detection
250 µm, 900 µm, ribbon, 2 mm or 3 mm and jacketed fiber
2000 ±100 Hz
General Specifications
Display Type
Power
N/A
1 9-Volt Alkaline
Battery Life
Operation Temperature
>10,000 operations typical
0°C to 50°C 90% RH (Non-condensing)
Storage Temperature
-30°C to +60°C 90% RH (Non-condensing)
Dimensions (H x W x D)
22 x 3.8 x 2.8 cm (8.5 x 1.5 x 1.1 in)
Weight
210 g (7.5 oz)
Notes:
a. 250 µm coated fiber parameters are specified with OFI plunger in the “250/900/RIB” position.
2mm/ 3mm jacketed fiber parameters are specified with OFI plunger in the “2 mm /3 mm” position.
b. CW is a light signal that is not modulated.
Traffic is a light signal modulated by a random data sequence.
Tone is a light signal modulated into a nominal 50% duty cycle square wave.
c. Unless noted otherwise, all specifications are typical. Actual results can vary by several dB depending
on fiber type, coating material, jacket color, jacket hardness, and other factors.
All specifications stated above are as measured at 25°C.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
101
© 2002-2011, AFL, all rights reserved. OFI1-11-2000, Revision C, 2011-10-14
Specifications are subject to change without notice.
DFS1 Digital FiberScope
The DFS1 Digital FiberScope supports magnified video inspection
of optical fiber connector end-faces during fiber optic cable
and connector installation and maintenance. The ergonomically
designed hand-held unit illuminates fiber end-faces and delivers
magnified images via USB port to AFL’s M-series OTDRs
(M210, M200, M700) or C-series OTDRs and Certification Testers
(C840, C850, C860, C880). FiberScope software displays, labels
and stores captured images as part of connector installation
and/or maintenance records.
DFS1 Digital FiberScope
A large adjustment knob permits easy focusing using real-time
view. Once focused, a conveniently located trigger button signals
the attached display device to capture the image for analysis and
archiving. The scope’s ergonomic shape and control locations
support comfortable, single-handed operation.
Clean connector
The DFS1 is powered through the USB port, eliminating the need
for an additional battery or AC power supplies. Electronic video
inspection eliminates all danger of eye damage from active (lit)
fibers carrying either visible or infrared wavelengths.
An extensive assortment of adapters supports inspection of
a wide range of optical jumper cable connector ferrules and
bulkhead adapters. Bulkhead adapter tips are available in
multiple lengths as well as 60° angle. Connector adapters are
available for PC, UPC or APC polished ferrules in 1.25 mm,
2.5 mm and other diameters. The DFS1 is available in three
different kits which provide either PC/UPC adapters, APC
adapters or no adapters.
Dirty connector
DFS1 Digital FiberScope with M210 OTDR
Features
•• Ergonomic, hand-held design
•• Single-handed operation
•• 400x magnification
•• Fast, easy focus and display capture
•• Video output via USB port to M210, M200, M700, C840, C850,
C860, C880 or user PC
•• Powered from USB; no batteries required
•• Extensive assortment of interchangeable fiber connector
and bulkhead adapter tips
•• Adapter tips easily changed; no tools required
•• Use AFL SimpleView PC software with DFS1 to inspect
connectors using a laptop PC
AFL SimpleView™ Fiber Inspection Software is an application,
which permits the DFS1 Digital FiberScope to be used with
Windows® XP or Windows® 7 computers. AFL SimpleView
software displays a live, high-resolution video image of the endface of an optical fiber on the PC’s display. SimpleView software
is a free download www.AFLglobal.com.
Applications
•• Ideal for telco, broadband and enterprise applications
•• Optical connector and bulkhead adapter inspection
•• Display and analyze fiber end-face quality on C- and M-series
•• Visually inspect fiber end-faces for damage
or contamination impairing optical transmission
•• Generate installation inspection records, associating captured
digital photo with fiber ID
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
102
© 2011-2012, AFL, all rights reserved. DFS1-00-2000 Revision 1C, 2012-01-30
Specifications are subject to change without notice.
DFS1 Digital FiberScope
Specifications
DFS1 Digital FiberScope with M700 OTDR
a
Parameters
VALUE
400X
Magnification
~400 µm x 300 µm
Field of View
0.5 μm detectable
Resolution
0°C to 50°C
Operating Temperature
-20°C to 70°C
Storage Temperature
Manual adjustment, 2 mm max travel
Focus
35 mm diameter x 175 mm length (without tip)
200 g
Dimensions
Weight
Blue LED
USB port of M-series OTDRs or C-series OTDRS and Certification Testers
Light Source
Power Supply
Note:
a. All specifications valid at 23°C ±2°C (73.4°F ±3.6°F) unless otherwise specified.
Ordering Information
DFS1 Digital FiberScope Kit
The DFS1 is available in three different kits which provide either PC/UPC adapters, APC
adapters, or no adapters. All kits include soft carry case, a storage box to hold up to six
adapter tips, FiberScope display software update for M-series OTDRs (M200, M700)
or C-series OTDRs and Certification Testers (C840, C850, C860, C880), and a quick
reference guide.
Description
DFS1 Digital FiberScope PC/UPC Inspection Kit includes:
(1) DFS1-00-04X0MR DFS1 USB Digital FiberScope
(1) DFS1-00-0001MR Universal 1.25 mm male PC adapter tip
(1) DFS1-00-0002MR Universal 2.5 mm male PC adapter tip
(1) DFS1-00-0003MR SC and FC female bulkhead adapter tip
(1) DFS1-00-0004MR LC female bulkhead adapter tip
(1) DFS1-04-0001MZ soft carry case for scope and adapters
(1) 8500-05-0001MZ One-Click Cleaner SC, ST, FC
(1) 8500-05-0002MZ One-Click Cleaner LC/MU
(1) 1400-01-0093MZ 6-compartment adapter tip storage box
(1) Digital FiberScope display software update for M200, M700, C840, C850, C860, or C880
DFS1 Digital FiberScope APC Inspection Kit includes:
(1) DFS1-00-04X0MR DFS1 USB Digital FiberScope
(1) DFS1-01-0002MR Universal 2.5 mm male APC adapter tip
(1) DFS1-01-0003MR SC/APC and FC/APC bulkhead adapter tip
(1) DFS1-01-0011MR SC/APC bulkhead adapter tip
(1) DFS1-04-0001MZ soft carry case for scope and adapters
(1) 8500-05-0001MZ One-Click Cleaner SC, ST, FC
(1) 1400-01-0093MZ 6-compartment adapter tip storage box
(1) Digital FiberScope display software update for M200, M700, C840, C850, C860, or C880
DFS1 USB Digital Fiber Inspection Kit without Adapters includes:
(1) DFS1-00-004X0MR DFS1 USB Digital FiberScope
(1) Soft carry case for scope and adapters
(1) 6-compartment adapter tip box
(1) Digital FiberScope display software update for M200, M700, C840, C850, C860, or C880
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
103
AFL NO.
DFS1-00-04XU
DFS1-00-04XA
DFS1-00-04XN
© 2011-2012, AFL, all rights reserved. DFS1-00-2000 Revision 1C, 2012-01-30
Specifications are subject to change without notice.
DFS1 Digital FiberScope
Ordering Information (continued)
DFS1 Accessories
DFS1-00-0001MR
Description
Soft carry case for DFS1 Digital FiberScope and adapters
AFL NO.
DFS1-04-0001MZ
6-compartment adapter tip storage box
1400-01-0093MZ
11-compartment adapter tip storage box
1400-01-0094MZ
One-Click Cleaner SC, ST, FC
8500-05-0001MZ
One-Click Cleaner LC/MU
8500-05-0002MZ
AFL SimpleView PC viewer software
Free download from
www.AFLglobal.com
DFS1 Adapter Tips
DFS1-00-0002MR
DFS1-00-0004MR
DFS1-00-0013MR
The following table identifies commonly required adapter tips. Other adapter tips
available. Please consult the factory for additional adapter tips and prices.
Description
PC Ferrule Connector Adapter Tips
AFL NO.
Universal 1.25 mm tip for PC ferrule connector
Universal 2.5 mm tip for PC ferrule connector
Universal 2.0 mm tip for PC ferrule connector
Slim 1.6 mm tip for PC ferrule (termini)
Slim 1.25 mm probe tip for LuxCis and termini
Slim 2.5 mm PC ferrule tip for ELIO and termini
Tip for ELIO 1.25 mm ferrule connector
SC/PC and FC/PC Bulkhead Adapter Tips
DFS1-00-0001MR
DFS1-00-0002MR
DFS1-00-0005MR
DFS1-00-0006MR
DFS1-00-0038MR
DFS1-00-0039MR
DFS1-00-0008MR
Tip for SC/PC and FC/PC bulkhead adapter
Short extended tip for SC/PC and FC/PC bulkhead adapter
Medium extended tip for SC/PC and FC/PC bulkhead adapter
Long extended tip for SC/PC and FC/PC bulkhead adapter
60° angled tip for SC/PC and FC/PC bulkhead adapter
60º angled tip for SC/PC bulkhead adapter
ST/PC Bulkhead Adapter Tips
DFS1-00-0003MR
DFS1-00-0010MR
DFS1-00-0011MR
DFS1-00-0012MR
DFS1-00-0013MR
DFS1-00-0040MR
Tip for ST/PC bulkhead adapter
Short extended tip for ST/PC bulkhead adapter
Medium extended tip for ST/PC bulkhead adapter
Long extended tip for ST/PC bulkhead adapter
60° angled tip for ST/PC bulkhead adapter
LC/PC Bulkhead Adapter Tips
DFS1-00-0014MR
DFS1-00-0015MR
DFS1-00-0016MR
DFS1-00-0017MR
DFS1-00-0018MR
Tip for LC/PC bulkhead adapter
Short extended tip for LC/PC bulkhead adapter
Medium extended tip for LC/PC bulkhead adapter
Long extended tip for LC/PC bulkhead adapter
60° angled tip for LC/PC bulkhead adapter
DFS1-00-0004MR
DFS1-00-0019MR
DFS1-00-0020MR
DFS1-00-0021MR
DFS1-00-0022MR
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
104
© 2011-2012, AFL, all rights reserved. DFS1-00-2000 Revision 1C, 2012-01-30
Specifications are subject to change without notice.
DFS1 Digital FiberScope
Ordering Information (continued)
Description
E2000/PC Bulkhead Adapter Tips
AFL NO.
Short extended tip for E2000/PC bulkhead adapter
Medium extended tip for E2000/PC bulkhead adapter
Long extended tip for E2000/PC bulkhead adapter
MU/PC Bulkhead Adapter Tips
DFS1-00-0023MR
DFS1-00-0024MR
DFS1-00-0025MR
Tip for MU/PC bulkhead adapter
Short extended tip for MU/PC bulkhead adapter
Medium extended tip for MU/PC bulkhead adapter
Long extended tip for MU/PC bulkhead adapter
60° angled tip for MU/PC bulkhead adapter
MTP/PC Multi-fiber Adapter Tips (ferrule & bulkhead)
DFS1-00-0026MR
DFS1-00-0027MR
DFS1-00-0028MR
DFS1-00-0029MR
DFS1-00-0030MR
MTP/PC bulkhead adapter extended tip; includes base plus MTP/PC front end tip.
Test ferrules using adapter tip with bulkhead adapter.
Front end tip for MTP/PC ferrule and bulkhead adapter
MTP/PC and MTP/APC bulkhead adapter extended tip kit; includes base plus MTP/PC
and MTP/APC front end tips. Test ferrules using adapter tip with bulkhead adapter.
Miscellaneous PC Bulkhead Adapter Tips
DFS1-00-0037MR
Tip for LEMO 2.0 mm bulkhead adapter
Tip for LX.5/PC bulkhead adapter
Tip for 2.0 mm termini bulkhead adapter
Tip for 1.6 mm termini bulkhead adapter
Tip for ELIO 1.25 mm bulkhead adapter
APC Tips
DFS1-00-0031MR
DFS1-00-0032MR
DFS1-00-0033MR
DFS1-00-0034MR
DFS1-00-0036MR
Universal 1.25 mm tip for APC ferrule connector
Universal 2.5 mm tip for APC ferrule connector
Tip for SC/APC and FC/APC bulkhead adapter
Tip for SC/APC bulkhead adapter
Tip for LC/APC bulkhead adapter
DFS1-01-0001MR
DFS1-01-0002MR
DFS1-01-0003MR
DFS1-01-0011MR
DFS1-01-0004MR
Short extended tip for SC/APC bulkhead adapter
60° angled tip for SC/APC bulkhead adapter
Tip for E2000/APC bulkhead adapter
Tip for LX.5/APC bulkhead adapter
MTP/APC bulkhead adapter extended tip kit; includes base plus MTP/APC front end tip.
Test ferrules using adapter tip with bulkhead adapter.
Front end tip for MTP/APC ferrule and bulkhead adapter
DFS1-01-0005MR
DFS1-01-0006MR
DFS1-01-0008MR
DFS1-01-0009MR
DFS1-01-0010MR
DFS1-00-0041MR
DFS1-00-0042MR
DFS1-01-0012MR
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
105
© 2011-2012, AFL, all rights reserved. DFS1-00-2000 Revision 1C, 2012-01-30
Specifications are subject to change without notice.
AFL SimpleView™ Fiber Inspection Software
AFL SimpleView Fiber Inspection Software is an application
that permits the NOYES DFS1 Digital FiberScope to be used
with Windows® XP or Windows 7 computers. AFL SimpleView
software provides a live, high-resolution video image of the
end-face of an optical fiber. This capability enables fiber installers
and network technicians to inspect and troubleshoot optical
fibers and verify that they are clean and undamaged.
The DFS1 Digital FiberScope is an ergonomically-designed
hand-held inspection probe that illuminates the end-face of
single-mode or multimode optical fiber and delivers live video
images to laptop computers and NOYES OTDRs.
Capabilities
•• 0.5 µm detection
•• 1.0 µm optical resolution
•• 250 µm field of view (minimum)
•• Integrated focus control
Applications
•• Document “as-built” condition of patch cords and connectors
•• Document “as-inspected” condition of malfunctioning links
•• Perform final or incoming inspection of equipment
and components
Minimum System Requirements
•• OS: Windows XP or Windows 7
•• USB: USB 1.1 Host
Scan the QR code with a smart phone
to learn more.
AFL SimpleView software is available as a free download at:
http://www.AFLglobal.com/Contact/NOYES/SimpleView-Download
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
106
© 2011, AFL, all rights reserved. SVSW-00-2000 Revision 1B, 2011-09-19
Specifications are subject to change without notice.
OFS 300 Optical Microscope
Inspect patch cords with NOYES OFS 300 from AFL. Designed for field use, with lab
quality optics, the OFS 300 scope delivers a high quality end-face image at 200x
magnification. Quickly identify scratches, dirt or other problems normally associated
with poor network performance.
FACT: A large percentage of network failures are caused by dirty or damaged end-faces
on fiber optic connectors. Inspecting jumper end-faces prior to connection is critical to
network performance. The OFS 300 scope provides a quality optical inspection tool at
an affordable price.
Safety: A built-in laser safety filter provides >40 dB IR protection to reduce risk of injury
to the eye if accidentally viewing an active fiber.*
Features
•• Laser safety filter installed
•• 200x image size
•• 2.5 mm Universal connector Included
•• Low battery LED indicator
•• Long battery life with 2 AA alkaline
•• Rugged, hand-held, easy-to-use
•• Tripod mount
Applications
•• Verify jumper ends are clean prior
to connecting to network
•• Inspect end-faces for scratches or pits
•• Eliminate the most common network
fault (bad connectors)
The OFS 300 features a universal adapter cap mount that accepts a variety of
NOYES thread-on style adapter caps (ordered separately) to ease inspection of many
connector style. A momentary power switch located on the top panel keeps one hand
free for focusing.
Tri-pod mount: For stationary work, the tri-pod mount allows the OFS 300 to attach
to any standard camera tri-pod.
The OFS 300 offers 60 hours of continuous battery life from standard 2 AA batteries and
features an LED indicator, which will flash when batteries require replacement.
*Always follow your company’s laser safety procedures and never use an optical
microscope to view live fiber optic connectors.
Specifications
a
Optical Specifications
Nominal Magnification
Adapter Mount
Safety Filter
200X
Universal, thread-on
Schott KG3, >40 dB IR
General Specifications
Operating Temperature
Storage Temperature
Power
Battery Life
Weight in Use
Size (H x W x D)
0°C to +50°C
-20°C to +50°C
2 AA batteries
>60 hours
0.67 kg (1.5 lb)
13 x 5 x 20 cm (5 x 2 x 8 in)
Note: a. All specifications valid at 25°C unless otherwise specified.
Ordering Information
Includes
afl no.
OFS 300 Inspection Scope, 2 AA batteries, neck strap, 2.5 mm universal
adapter cap, and user’s guide
OFS 300
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
107
© 2002-2011, AFL, all rights reserved. OFS1-00-2000 Revision U, 2011-07-27
Specifications are subject to change without notice.
VS 300 View Safe Video Microscope
Inspect patch cords with NOYES VS 300 from AFL. Designed for field use, the VS 300 scope
delivers a high quality end-face image at 400x magnification. Quickly identify scratches,
dirt or other problems normally associated with poor network performance.
FACT: A large percentage of network failures are caused by dirty or damaged end-faces
on fiber optic connectors. Inspecting jumper end-faces prior to connection is critical to
network performance. The VS 300 scope provides a quality optical inspection tool at an
affordable price.
Safety by design: The VS 300 utilizes a camera and micro display to provide an end-face
image while eliminating the optical path to the technician’s eye. This ensures no harm in
the case of inadvertent viewing of live fibers. *
Features
•• Safety: The VS 300 has no optical
path to the user’s eye
•• Ergonomic: Comfortable molded
easy-grip case
•• 2.5 mm Universal Adapter included
(accepts FC, ST, FC, etc.)
•• View PC and Angled connector types
including MPO/MTP
•• NTSC Video Output
The VS 300 features a universal adapter cap mount that accepts a variety of NOYES
thread-on style adapter caps (ordered separately) to ease inspection of many connector
style. A momentary power switch located on the top panel keeps one hand free for focusing.
Tri-pod mount: For stationary work, the tri-pod mount allows the VS 300 to attach to any
standard camera tri-pod.
Auto time-out feature provides long battery life from standard 2 AA alkaline batteries.
*Always follow your company’s laser safety procedures and never use an optical
microscope to view live fiber optic connectors.
Specifications
Applications
•• Verify jumper ends are clean prior
to connecting to network
•• Inspect end-faces for scratches or pits
•• Eliminate the most common network
fault (bad connectors)
a
Optical
Magnification
Adaptor Mount
Safety Filter
Video Output
General
Operating Temperature
Storage Temperature
Humidity
Power Supply
Battery Life
Indicators
Weight
Size (H x W x D)
400X equivalent to 8" monitor for 20" distance
Thread-on (Universal)
Not Required - No optical path to user
NTSC
0°C to +50°C
-20°C to +60°C
0 to 90% (non - condensing)
2 AA alkaline batteries, optional AC adapter
10 hours continuous
Low battery
0.42 kg (0.94 lb)
3.5 x 1.5 x 8.5 in (8.9 x 3.8 x 21.6 cm)
Note: a. All specifications valid at 25°C unless otherwise specified.
Ordering Information
Includes
VS 300 Inspection Scope, 2 AA batteries, neck strap, 2.5 mm universal adapter cap
and users guide
afl no.
VS 300
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
108
© 2002-2011, AFL, all rights reserved. V0S3-00-2000 Revision E, 2011-07-27
Specifications are subject to change without notice.
VFS 2 Video Fiberscope
The versatile VFS 2 Video Fiberscope, designed for inspection of dirty and/or damaged
connectors, offers unparalleled access to connectors and bulkhead adapters and retains
superior image quality associated with NOYES inspection products. The unique “opticalknuckle” design allows the user to orient the VFS 2 robe head in virtually any direction
for viewing connectors that may be located in tight or difficult locations. Compatibility
with standard adapters eliminates the need for expensive custom angled adapters
reducing total cost of ownership. With a probe head length of less than 8 cm (3.25"),
access into crowded and cramped quarters becomes a reality.
The VFS 2 resolves ¾ micron scratches keeping with our standard of quality end-face
images. This inspection scope is one-handed operated and equally easy for both right
and left handed individuals. The VFS 2 probe may be paired with the VFS 2
high-resolution 3.5" display unit.
Specifications
Features
•• Unparalleled access to connectors
and bulkhead adapters
•• Resolves ¾ micron scratches
•• 500 micron field of view (diagonal)
•• Standard adapter tips for easy centering
•• Precision focusing (left or right handed)
•• Lithium-ion battery
Applications
•• Inspect optical connector end faces
for damage and contamination
•• Patch cord inspection including
a wide range of connector types
•• In adapter inspection –
view connectors in patch panels
•• Rotating head feature to inspect
connectors in tight locations with
standard adapters
a
Optical
Field of View
Magnification
Resolution
Video Output
VFS 2 Probe specifications
Operating Temperature
Storage Temperature
Humidity
Probe Weight
Probe Body Size (L x W x D)
Probe Head Size (with FC adapter), (L x W x D)
VFS 2 Display specifications
Display Screen Size
Display Package With Protective Boot Size
Weight
Power
Battery Life With VFS2 Probe
Operating Temperature
Storage Temperature
Humidity
Li-Ion Battery Pack Charging Temperature
Li-Ion Battery Pack Recharging Time
500 microns diagonal (300 μm vertical, 400 μm horizontal)
180X on 3.5" display
¾ micron scratch
NTSC
0°C to +50°C
-20°C to + 60°C
0 to 90% (non-condensing)
0.2 kg (0.4 lb)
15.9 x 3.3 x 3.3 cm (6.3 x 1.3 x 1.3 in)
7.9 x 2.5 x 1.5 cm (3.1 x 1.0 x 0.6 in)
8.9 cm (3.5 in) TFT NTSC
22.9 x 5.1 x 11.9 cm (9.0 x 2.0 x 4.7 in)
2 lb (0.9 kg)
Li-Ion battery pack or AC adapter
>4 hours
0°C to 50° C
-20°C to +60°C
0 to 90 % RH non-condensing
-10°C to +45°C
4 hours
Note: a. All specifications valid at 25°C unless otherwise specified.
Ordering Information
Includes
VFS2 Probe, VFS 2 LCD Display, AC adapter
VFS2 Probe, VCP1 USB interface and basic software (requires computer with display)
afl no.
VFS2-00-0900
VFS2-00-0903
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
109
© 2002-2011, AFL, all rights reserved. VFS2-00-2000 Revision D, 2011-07-27
Specifications are subject to change without notice.
VOA6-SM Variable Optical Attenuator
The VOA6-SM is a rugged, lightweight variable optical attenuator that is ideal for use
in a wide range of single-mode fiber link certification and engineering test applications.
Managers will appreciate its simplicity, which minimizes training requirements and
speeds deployment. Field technicians will appreciate the simple thumbwheel attenuation
control, which allows precise, one-hand operation. Engineers will appreciate the
accuracy and return loss performance of the VOA6-SM.
The VOA6-SM is a two-port passive optical device that, when inserted in an optical
link, allows a technician to perform several important certification tasks. For example,
when the fixed output level of a laser transmitter is too high for downstream devices,
the VOA6-SM can be used to determine the amount of fixed attenuation required to
match power levels. Alternately, during activation and certification of a new circuit,
the VOA6-SM can be used to vary the amount of link loss and determine the optical
headroom of the circuit. The 45 dB optical return loss of the VOA6-SM makes it ideal for
use with sensitive DFB laser transmitters and other devices that can be degraded
or damaged by reflected power.
The VOA6-SM is calibrated at key FTTx wavelengths including 1310, 1490, 1550 and
1625 nm and can be used in the calibration, engineering and production test lab as well
as in the field. Its rugged construction ensures many years of service.
The VOA6-SM operates on an internal Li-Ion battery and includes a 10-minute auto
power down and 60-second backlight power off capabilities. An AC adapter and battery
charger is standard with every unit.
Features
•• 9 µm /125 µm fiber applications
•• 2 dB to 60 dB attenuation
•• Thumbwheel for one-handed operation
•• Calibrated for key FTTx wavelengths
•• 45 dB return loss for use with DFB Lasers
Applications
•• Validate link budgets and optical margin
•• Determine optical pad value
•• Characterize optical components, modules, and systems
www.AFLglobal.com or (800)-321-5298, (603)-528-7780
110
© 2011, AFL, all rights reserved. VOA6-00-2000 Revision 1C, 2011-05-25
Specifications are subject to change without notice.
VOA6-SM Variable Optical Attenuator
Specifications
Ordering Information
a
Optical
Fiber Type
9/125 µm single-mode
Wavelength Range
1260 – 1650 nm
Calibrated Wavelengths
1310, 1490, 1550, 1625 nm
Measurement Range
2 – 60 dB
Insertion Loss
2 dB (max)
Resolution
0.05 dB
Linearity
±0.5 dB
Repeatability
±0.2 dB
Accuracy
±0.8 dB
Setting Type
Continuous over entire range
Function
Bi-directional
Return Loss b
45 dB
Max Input
+20 dBm
General
Connector Adapters
Battery
Battery Life
VOA6-SM Variable Optical Attenuator comes with a protective
rubber boot, AC adapter, Li-Ion battery, battery charger and a
soft carry case.
Description
VOA6-SM Variable Optical Attenuator
Accessories and Connector Adapters
FC/PC standard
SC/PC, ST/PC (available – switchable)
Li-Ion rechargable
c
AFL no.
VOA6-SM-FC
Description
FC Connector (order 2)
AFL NO.
2900-FT-LS-FC MR
SC Connector (order 2)
2900-FT-LS-SC MR
ST Connector (order 2)
2900-FT-LS-ST MR
Protective Rubber Boot
1400-10-0220PZ
Carry Case
1400-01-0087PZ
One-Click Cleaner SC/ST/FC
Cletop-SB
8500-05-0001MZ
8500-10-0016MZ
Visual Fault Identifier, 650 nm
HiLite
100 hrs
Auto-Off Feature
10 min
Operating Temperature
-10°C to 55°C (14°F to 131°F)
Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Humidity
0 % to 90 % (non-condensing)
Dimensions
210 x 115 x 55 mm (8.27 x 4.53 x 2.17 in)
Weight
450 g (1.0 lb)
Notes:
a. All specifications valid at 23°C ±2°C (73.4°F ±3.6°F) unless otherwise specified.
b. Typical.
c. Unit powered off in between level changes. Typical time spent changing level <20 minutes per hour.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800)-321-5298, (603)-528-7780
111
© 2011, AFL, all rights reserved. VOA6-00-2000 Revision 1C, 2011-05-25
Specifications are subject to change without notice.
VOA5-MM Variable Fiber Optic Attenuator
The NOYES VOA5-MM from AFL is a hand-held variable optical attenuator suited for a
wide range of fiber link certification and production test applications. The VOA5-MM
attenuator offers high bi-directional return loss and will maintain the set attenuation
level when the unit is powered down.
Input/output ports of the VOA5-MM are equipped with tool-free removable adapters
to allow the output connectors to be inspected and cleaned.
The VOA5-MM is powered by two (2) AA alkaline batteries or an AC power adapter.
A NiCad rechargeable battery pack is available as an option.
Specifications
a
Optical
Features
•• High speed (0 to 60 dB <3 seconds)
•• 2 AA alkaline, AC power, or optional
NiCad battery pack
•• Long battery life (>16 hours)
•• Hand-held, rugged, lightweight (0.55 kg)
•• Cost-effective, easy to use
Applications
•• BER testing
•• System tolerance to signal attenuation
•• New equipment turn-ups
•• Lab quality motorized
repeatable attenuator
Fiber Type
62.5 µm, multimode
Wavelength Range
850 - 1300 nm
Calibrated Wavelengths
850, 1300 nm
Attenuation Range
0 to 30 dB
Insertion Loss (max.)
1.5 dB @ 850 nm
3.0 dB @ 1300 nm
Return Loss (min.)
20 dB
Display Resolution
0.1 dB
Accuracy @+25ºC
±0.20 dB typical, ±0.4 dB max (0 dB to 30 dB)
±0.3 dB typical, ±0.6 dB max (30 dB to 60 dB)
Repeatability @+25ºC
±0.25 dB b
Maximum Input Level
+24 dBm
General
Battery Life (2 AA alkaline)
10 hours
Speed
0 to 30 dB in less than 5 seconds
Power
2 AA alkaline, AC adapter, or NiMH battery pack (optional)
Size (H x W X D)
18.5 x 11.1 x 4.6 cm (7.3 x 4.4 x 1.8 in)
Weight
0.55 kg (1.22 lb)
Operating Temperature
0°C to +50°C
Storage Temperature
-20°C to +60°C
Relative Humidity
0 to 90 % (non-condensing)
Available Connectors
SC/UPC, FC/UPC, ST/UPC
Notes:
a. All specifications valid at 25°C unless otherwise specified.
b. Repeatability is defined as the mean plus one standard deviation typical value.
Ordering Information
Includes
Protective rubber boot, 2 AA alkaline batteries, 120/ 220 V AC power adapter
(specify optical connector and AC power cord type) and carry case
afl no.
VOA5-MM
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
112
© 2002-2011, AFL, all rights reserved. VOA5-00-2000 Revision D, 2011-07-27
Specifications are subject to change without notice.
SVA1 Single-mode Variable Attenuator
The SVA1 Single-mode Variable Attenuator advances fiber optic field testing by offering
superior performance in a low cost hand-held package. Utilizing a simplified, industry
accepted attenuation technique, the innovative design of the SVA1 offers superior
resolution across the entire 60 dB dynamic range.
Intended for field testing during installation, new equipment turn-ups or routine
maintenance, the SVA1 is a complete, easy-to-use attenuator. Its unique features allow
bidirectional signal transmission with no loss penalty.
Never be caught with low or discharged batteries. The mechanical design of the SVA1
uses no batteries – it is always ready when you need it.
Input/output ports of the SVA1 are equipped with tool-free removable adapters to allow
the output connectors to be inspected and cleaned.
Applications
•• BER testing
•• System tolerance to signal attenuation
•• New equipment turn-ups
•• Low cost lab attenuator
The SVA1 is available with a variety of connectors and reflectance options to better than
60 dB. With only two adjustments, COARSE and FINE, the SVA 1 is simple to understand
and operate. The SVA1 is suited for all single-mode applications including telco, LANs,
WANs, video and CATV.
Features
•• Single-mode attenuator for a wide range of wavelengths
•• Lightweight, robust, designed for field applications
•• 60 dB dynamic range
•• Coarse and fine adjustments
•• Low insertion loss
•• Swappable (FC, ST, SC, LC) adapters remove for cleaning
Specifications
a
Optical Specifications
Wavelengths
Insertion Loss
Minimum Attenuation
Return Loss
Coarse Adjustment
Fine Adjustment
Connector
General Specifications
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
SVA1
1310 nm & 1550 nm ±30 nm
≤1.5 dB @ 1310 nm
60 dB
50 dB (≥60 dB optional - angled FC)
0 to 60 dB nominal
0 to 10 dB nominal
FC, ST, SC
-10°C to +55°C
-30°C to 60°C
14 x 7 x 3.8 cm (5.5 x 2.75 x 1.5 in)
168 g (6 oz)
Note: a. All specifications valid at 25°C unless otherwise specified.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
113
© 2002-2011, AFL, all rights reserved. SVA1-00-2000 Revision K, 2011-07-29
Specifications are subject to change without notice.
Broadband Activation Kits
NOYES Broadband Activation Kits provide the essential tools
field technicians need to install, certify, and activate single-mode
broadband fiber links. Each kit includes a connector cleaner,
an optical light source, an optical power meter and a variable
optical attenuator.
As cleaning is an essential part of broadband activation, the
NOYES One-Click Mini is a must-have for field technicians.
Simply insert the One-Click Mini Cleaner into a connector and
push until an audible “click” is heard.
VOA6-SM Variable Optical Attenuator
OPM4-4D Optical Power Meter
The NOYES OPM4-4D Optical Power Meter simplifies installation
and certification tasks by using innovative Wave ID-automatic
wavelength identification capabilities to prevent setup and
measurement errors. With +26 dBm input rating and 76 dB
dynamic range, the OPM4-4D is ideal for passive FTTx and
amplified Broadband networks.
The NOYES OLS7-FTTH Laser Light Source provides the CW,
tone-modulated and encoded test signals that enable technicians
to find, identify and certify fiber circuits. With just one output
port, the OLS7-FTTH requires fewer test jumpers, reference
measurements and cleaning steps than other dual-output
light sources.
OLS7-FTTH Laser Light Source
The NOYES VOA6-SM Variable Optical Attenuator makes
quick work of optical headroom testing and optical power
level balancing. Its simple thumbwheel control and one-hand
operation makes activation and turn-up tasks a breeze.
One-Click Mini Cleaner SC/ST/FC
TACT1-4-FH-FC Kit Features
•• Includes:
One-Click Mini Cleaner, VOA6-SM, OPM4-4D, OLS7-FTTH
•• All devices calibrated for key FTTx wavelengths:
1310, 1490, 1550 nm
(OPM4-4D and VOA6-SM also calibrated at 1625 nm)
•• All devices configured for FC connectors
TACT1-4-FH-SC Kit Features
•• Includes:
One-Click Mini Cleaner, VOA6-SM, OPM4-4D, OLS7-FTTH
•• All devices calibrated for key FTTx wavelengths:
1310, 1490, 1550 nm
(OPM4-4D and VOA6-SM also calibrated at 1625 nm)
•• All devices configured for SC connectors
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
114
© 2011, AFL, all rights reserved. TACT-BA-2000 Revision 1B, 2011-07-13
Specifications are subject to change without notice.
Broadband Activation Kits
Ordering Information
Description
AFL no.
Kit includes:
(1) VOA6-SM Variable Optical Attenuator a
(1) OPM4-4D Optical Power Meter b
(1) OLS7-FTTH Laser Light Source c
(1) One-Click Mini SC/ST/FC
Carry Cases
Kit includes:
(1) VOA6-SM Variable Optical Attenuator a
(1) OPM4-4D Optical Power Meter b
(1) OLS7-FTTH Laser Light Source c
(1) One-Click Mini SC/ST/FC
Carry Cases
TACT1-4-FH-FC
TACT1-4-FH-SC
Notes:
a. VOA6-SM Variable Optical Attenuator comes with a protective rubber boot, AC adapter, Li-Ion battery and
battery charger.
b. OPM4-4D Optical Power Meter comes with a protective rubber boot and 2 AA batteries.
c.OLS7-FTTH Laser Light Source comes with a protective rubber boot and 2 AA batteries.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
115
© 2011, AFL, all rights reserved. TACT-BA-2000 Revision 1B, 2011-07-13
Specifications are subject to change without notice.
Telecom Activation Kits
NOYES Telecom Activation Kits provide the essential tools field
technicians need to install, certify and activate single-mode
fiber links. Each kit includes a connector cleaner, an optical light
source, an optical power meter and a variable optical attenuator.
As cleaning is an essential part of telecom activation, the NOYES
One-Click Mini is a must-have for field technicians. Simply insert
the One-Click Mini Cleaner into a connector and push until an
audible “click” is heard.
The NOYES OPM4-4D Optical Power Meter simplifies installation
and certification tasks by using innovative Wave ID-automatic
wavelength identification capabilities to prevent setup and
measurement errors. With +26 dBm input rating and 76 dB
dynamic range, the OPM4-4D is ideal for passive and amplified
telecom networks.
VOA6-SM Variable Optical Attenuator
OPM4-4D Optical Power Meter
The NOYES OLS2-DUAL Laser Light Source provides the CW,
tone-modulated and encoded test signals that enable technicians
to find, identify and certify fiber circuits. With just one output
port, the OLS2-DUAL requires fewer test jumpers, reference
measurements and cleaning steps than other dual-output
light sources.
OLS2-DUAL Laser Light Source
The NOYES VOA6-SM Variable Optical Attenuator makes
quick work of optical headroom testing and optical power
level balancing. Its simple thumbwheel control and one-hand
operation makes activation and turn-up tasks a breeze.
One-Click Mini Cleaner SC/ST/FC
TACT1-4-6D-FC Kit Features
•• Includes:
One-Click Mini Cleaner, VOA6-SM, OPM4-4D, OLS2-DUAL
•• All devices configured for FC connectors
TACT1-4-6D-SC Kit Features
•• Includes:
One-Click Mini Cleaner, VOA6-SM, OPM4-4D, OLS2-DUAL
•• All devices configured for SC connectors
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
116
© 2011, AFL, all rights reserved. TACT-TA-2000 Revision 1B, 2011-07-13
Specifications are subject to change without notice.
Telecom Activation Kits
Ordering Information
Description
AFL no.
Kit includes:
(1) VOA6-SM Variable Optical Attenuator a
(1) OPM4-4D Optical Power Meter b
(1) OLS2-DUAL Laser Light Source c
(1) One-Click Mini SC/ST/FC
Carry Cases
Kit includes:
(1) VOA6-SM Variable Optical Attenuator a
(1) OPM4-4D Optical Power Meter b
(1) OLS2-DUAL Laser Light Source c
(1) One-Click Mini SC/ST/FC
Carry Cases
TACT1-4-6D-FC
TACT1-4-6D-SC
Notes:
a. VOA6-SM Variable Optical Attenuator comes with a protective rubber boot, AC adapter, Li-Ion battery
and battery charger.
b. OPM4-4D Optical Power Meter comes with a protective rubber boot and 2 AA batteries.
c.OLS2-DUAL Laser Light Source comes with a protective rubber boot and 2 AA batteries.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
117
© 2011, AFL, all rights reserved. TACT-TA-2000 Revision 1B, 2011-07-13
Specifications are subject to change without notice.
NS and NSR Series Fiber Optic
Network Simulators
NOYES Fiber Optic Network Simulators from AFL are custom built
“fiber boxes” intended to duplicate installed fiber optic facilities.
Training schools, laboratory testing or field troubleshooting are
just few of the many applications for units. Network simulators
may be ordered with customer-specified lengths of multimode
or single-mode fiber. Events such as connections, fusion
splices and mechanical splices can be added at various points
within the fiber to duplicate installed networks. A full range
of connector types are available including SC, ST, FC and LC.
Angled or non-angled connectors can be specified. Each NOYES
network simulator includes full documentation for insertion loss,
attenuation/km and event location/value.
NSR-Series Rack-mountable Network Simulators
The NS models network simulators are housed in rugged
field-portable, bench top cases. The NS models accommodates
up to 15 km of optical fiber.
NS-Series NS Bench Top Network Simulators
The NSR models network simulators are custom built rackmountable fiber boxes. The NSR models are housed in either
18 or 23-inch rack-mountable box. These network simulators
can accommodate multiple lengths.
Features
•• User-specified fiber type
•• User-specified fiber types and lengths
•• User-specified events such as mechanical or fusion splices
•• OTDR trace provided for documentation
•• Variety of connector styles available
•• NSR models are Rack-mountable
•• The NS models are rugged, field-portable
•• The NSR models can accommodates up to 100 km of fiber
(NSR Models)
•• N.I.S.T. Traceable
Ordering Information
Contact AFL at (800) 321-5298 or (603) 528-6278 for
a quote for your custom Network Simulator.
Applications
•• Laboratory testing
•• Classroom training
•• Field troubleshooting
•• OTDR calibration
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
118
© 2002-2011, AFL, all rights reserved. NSR1-00-2000 Revision 1C, 2011-06-20
Specifications are subject to change without notice.
FTS Series Fiber Optic Talk Sets
Fiber optic talk sets are an inexpensive solution to meet your communication
needs when testing multimode or single-mode fiber optic cables. Designed for
voice communication over spare fibers, they provide full duplex, hands-free operation.
Ease-of-use and compact size allow the operators to focus on the task at hand, rather
than operating the talk set.
FTS 1
FTS 2
Two talk set models are available, the FTS 1 for communication on single-mode or
multimode fiber and the FTS 2 for long-range single-mode applications. The FTS 2 model
includes a multi-party communication feature, which provides the connection of two talk
sets at a common site to extend the range or to include three or more persons
in the conversation.
FTS-20C Clip-on Coupler
FTS-20C
A clip-on coupler is available for bare fiber access where terminated ends are not
available. The FTS 20C allows bi-directional communication from the center point on
a fiber link or from the unterminated end. When used with a fiber talk set, such as
the FTS2, the user can access the intended talk fiber at the mid-point across the span,
usually at the splice enclosure. The FTS-20C can also be used in conjunction with a laser
source or a tone detector to inject or detect 2 kHz test tones. It works at 1310, 1550
or 1625 nm. Coupling efficiency is approximately 18 dB.
Features
•• Single fiber, full duplex
•• Multimode and single-mode models
•• Field portable, hands-free operation
•• Automatic connection
•• Multi-party communication
•• Digital technology
•• Call-back feature/ringing (FTS 2 model)
Applications
•• Voice communication over optical fiber links
•• Testing schedule not impacted by cell phone coverage
•• Military and other secure locations
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
119
© 2002-2011, AFL, all rights reserved. FTS2-00-2000 Revision L, 2011-06-20
Specifications are subject to change without notice.
FTS Series Fiber Optic Talk Sets
Specifications
a
Model
Optical
Wavelength
FTS 1-2
FTS 2-1310
FTS 2-1550
1300 nm
1310 nm
1550 nm
Dynamic Range MM/SM
12 dB / 17 dB
45 dB
45 dB
N/A
113
90
N/A
150
180
Distance Range (km)
Typical 62.5 or 50 µm MM fiber b
>10
Typical 1310 nm optimized SM fiber c 50
Typical 1550 nm optimized SM fiber d 40
Fiber Type
Connector
Emitter Type
Emitter Classification
MM/SM
SM
FC, SC, ST
FC, SC, ST
LED
Laser
Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
General
Power
9V alkaline
4 AA alkaline or AC adapter
Weight in Use
0.25 kg (0.56 lb)
0.52 kg (1.16 lb)
Size (H x W x D)
16.8 x 7.9 x 3.8 cm
(6.6 x 3.1 x 1.5 in)
18.5 x 11.1 x 4.6 cm
(7.3 x 4.4 x 1.8 in)
Operating Temperature
Storage Temperature
0°C to +50°C, RH 0 to 90 % non-condensing
-20°C to +50°C, RH 0 to 90 % non-condensing
Notes:
a.
b.
c.
d.
All specifications valid at 25°C unless otherwise specified.
2.8 dB/km @ 850 nm, 0.6 dB/km @ 1300 nm.
0.4 dB/km @ 1310 nm, 0.3 dB/km @ 1550 nm.
0.5 dB/km @ 1310 nm, 0.25 dB/km @ 1550 nm.
Ordering Information
Includes
Protective rubber boots, batteries, headsets, manual and carry case
AFL NO.
FTS 1
FTS 2
Fiber optic talk sets are purchased in pairs. Two units are required for communication.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
120
© 2002-2011, AFL, all rights reserved. FTS2-00-2000 Revision L, 2011-06-20
Specifications are subject to change without notice.
Prepaid Calibration Plans
Cal Plans
AFL recommends annual calibrations on NOYES Test and
Inspection products. ISO certification also requires calibrations.
Annual calibrations performed at NOYES calibration facilities
ensure that you are getting the most out of your test equipment
and that your equipment is operating at NOYES specifications.
Prepaid Cal plans save you money by offering two annual
calibrations at a discounted price. In addition to the annual
calibrations, Cal plans offer a convenient calibration expiration
email service that notifies you when your equipment is due for
calibration. Express calibration services get your equipment back
to you quickly to minimize downtime.
Prepaid Cal plans include access to the NOYES product
knowledge base, which gives you access to white papers and
answers to frequently asked questions.
Get additional savings with access to preferred customer
promotions on NOYES products.
Cal Plus Plans
Cal Plus plans offer the same services as the Cal plans with
the addition of a two year extended warranty. If your test
equipment is found defective NOYES will repair or replace your
test equipment at no additional charge. All repairs are done
with genuine NOYES specified parts by a trained NOYES repair
technician. Save money with free return shipping from the repair
facility back to you on all extended warranty repairs. Also,
save money with free replacement of worn accessories such as
adapter caps, power cords and batteries.
Features
•• Discounted annual calibrations
•• Email notification of calibration expiration
•• Express service for calibrations
•• Software refresh
•• Access to knowledge base for NOYES products
•• Special preferred customer promotions on NOYES products
•• Cal Plus plans cover replacement of worn accessories
•• Two-year extended warranty included with Cal Plus plans
•• Extended warranty includes free return shipping
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
121
© 2011, AFL, all rights reserved. CALP-00-2000 Revision 1B, 2012-01-20
Specifications are subject to change without notice.
Prepaid Calibration Plans
Warranty Terms and Conditions
All NOYES test equipment products are warranted against defective material and workmanship for a period of (1) one year from the
date of delivery to the end user. Extended Warranty starts at the end of the standard (1) one year warranty period. Any product that
is found defective within the warranty period, will (at the discretion of NOYES) be repaired or replaced. Warranty will be voided if
the product has been repaired or altered by other than an authorized NOYES repair facility or which have been subject to misuse,
negligence, or accident. In no case shall NOYES liabilities exceed the original purchase price.
Ordering Information
Product
C-Series Certification Products
Model
C840
2 YR Cal Plan
2 YR Cal Plus Plan
AFL NO.
AFL NO.
CAL2-00-C840
CAL2-01-C840
C850
CAL2-00-C850
CAL2-01-C850
C860
CAL2-00-C860
CAL2-01-C860
C880
CAL2-00-C880
CAL2-01-C880
Contractor Series Loss Test Kits
CKM-2
CAL2-00-CKM2
CAL2-01-CKM2
CKSM-2
CAL2-00-CKSM2
CAL2-01-CKSM2
CSM Power Meters
CSM1-1
CAL2-00-CSM1-1
CAL2-01-CSM1-1
CSM1-2
CAL2-00-CSM1-2
CAL2-01-CSM1-2
CSM1-3
CAL2-00-CSM1-3
CAL2-01-CSM1-3
CSM1-4
CAL2-00-CSM1-4
CAL2-01-CSM1-4
CSS Light Sources
CSS1-MM
CAL2-00-CSS1-MM
CAL2-01-CSS1-MM
CSS1-SM
CAL2-00-CSS1-SM
CAL2-01-CSS1-SM
FTK Pro Installer Kits
FTK1-01-0900PR
CAL2-00-FTK1-0900
CAL2-01-FTK1-0900
FTK1-01-0902PR
CAL2-00-FTK1-0902
CAL2-01-FTK1-0902
FTS Talk Sets
FTS1 (pair)
CAL2-00-FTS1
CAL2-01-FTS1
FTS2 (pair)
CAL2-00-FTS2
CAL2-01-FTS2
M200 OTDR
M200-20
CAL2-00-M200-20
CAL2-01-M200-20
M200-22
CAL2-00-M200-22
CAL2-01-M200-22
M210 OTDR
M700 OTDR
MLP Loss Test Kits
M200-25
CAL2-00-M200-25
CAL2-01-M200-25
M210-20U-01
CAL2-00-M210-20
CAL2-01-M210-20
M210-22U-01
CAL2-00-M210-22
CAL2-01-M210-22
M210-25K-01-HC1
CAL2-00-M210-25K-HC1
CAL2-01-M210-25K-HC1
M210-25K-01-HC2
CAL2-00-M210-25K-HC2
CAL2-01-M210-25K-HC2
M210-25U-01
CAL2-00-M210-25
CAL2-01-M210-25
M700-20
CAL2-00-M700-20
CAL2-01-M700-20
M700-21
CAL2-00-M700-21
CAL2-01-M700-21
M700-24
CAL2-00-M700-24
CAL2-01-M700-24
M700-25
CAL2-00-M700-25
CAL2-01-M700-25
MLP1-1
CAL2-00-MLP1-1
CAL2-01-MLP1-1
MLP1-2
CAL2-00-MLP1-2
CAL2-01-MLP1-2
MLP4-1
CAL2-00-MLP4-1
CAL2-01-MLP4-1
MLP4-2
CAL2-00-MLP4-2
CAL2-01-MLP4-2
MLP5-2
CAL2-00-MLP5-2
CAL2-01-MLP5-2
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
122
© 2011, AFL, all rights reserved. CALP-00-2000 Revision 1B, 2012-01-20
Specifications are subject to change without notice.
Prepaid Calibration Plans
Ordering Information
Product
OFI Optical Fiber Identifiers
OFL280 FlexTester
OFL250 OTDR
OLS Light Sources
OLTS5 Loss Test Sets
OPM Power Meters
SLP Loss Test Kits
SMLP Loss Test Kits
Model
2 YR Cal Plan
2 YR Cal Plus Plan
AFL NO.
AFL NO.
OFI-200D
CAL2-00-OFI-200D
CAL2-01-OFI-200D
OFI-400
CAL2-00-OFI-400
CAL2-01-OFI-400
OFI-400C
CAL2-00-OFI-400C
CAL2-01-OFI-400C
OFI-400HP
CAL2-00-OFI-400HP
CAL2-01-OFI-400HP
OFI-FTTx
CAL2-00-OFI-FTTx
CAL2-01-OFI-FTTx
OFL 280-100
CAL2-00-OFL2-100
CAL2-01-OFL2-100
OFL 280-101
CAL2-00-OFL2-101
CAL2-01-OFL2-101
OFL 280-102
CAL2-00-OFL2-102
CAL2-01-OFL2-102
OFL 280-103
CAL2-00-OFL2-103
CAL2-01-OFL2-103
OFL250
CAL2-00-OFL250
CAL2-01-OFL250
OLS1-1
CAL2-00-OLS1-1
CAL2-01-OLS1-1
OLS1-2
CAL2-00-OLS1-2
CAL2-01-OLS1-2
OLS1-DUAL
CAL2-00-OLS1-DUAL
CAL2-01-OLS1-DUAL
OLS2-DUAL
CAL2-00-OLS2-DUAL
CAL2-01-OLS2-DUAL
OLS4
CAL2-00-OLS4
CAL2-01-OLS4
OLS7-3
CAL2-00-OLS7-3
CAL2-01-OLS7-3
OLS7-FTTH
CAL2-00-OLS7-FTTH
CAL2-01-OLS7-FTTH
OLTS5 -3
CAL2-00-OLTS5-3
CAL2-01-OLTS5-3
OLTS5 -5
CAL2-00-OLTS5-5
CAL2-01-OLTS5-5
OLTS5 -6
CAL2-00-OLTS5-6
CAL2-01-OLTS5-6
OPM1-2
CAL2-00-OPM1-2
CAL2-01-OPM1-2
OPM1-3
CAL2-00-OPM1-3
CAL2-01-OPM1-3
OPM4-1
CAL2-00-OPM4-1
CAL2-01-OPM4-1
OPM4-2
CAL2-00-OPM4-2
CAL2-01-OPM4-2
OPM4-3
CAL2-00-OPM4-3
CAL2-01-OPM4-3
OPM4-4
CAL2-00-OPM4-4
CAL2-01-OPM4-4
OPM4-FTTH
CAL2-00-OPM4-FTTH
CAL2-01-OPM4-FTTH
OPM5-2
CAL2-00-OPM5-2
CAL2-01-OPM5-2
OPM5-3
CAL2-00-OPM5-3
CAL2-01-OPM5-3
OPM5-4
CAL2-00-OPM5-4
CAL2-01-OPM5-4
SLP4-6
CAL2-00-SLP4-6
CAL2-01-SLP4-6
SLP4-6D
CAL2-00-SLP4-6D
CAL2-01-SLP4-6D
SLP4-7
CAL2-00-SLP4-7
CAL2-01-SLP4-7
SLP4-FTTH
CAL2-00-SLP4-FTTH
CAL2-01-SLP4-FTTH
SLP5-6
CAL2-00-SLP5-6
CAL2-01-SLP5-6
SLP5-6D
CAL2-00-SLP5-6D
CAL2-01-SLP5-6D
SLP5-7
CAL2-00-SLP5-7
CAL2-01-SLP5-7
SLP5-FTTH
CAL2-00-SLP5-FTTH
CAL2-01-SLP5-FTTH
SMLP4-4
CAL2-00-SMLP4-4
CAL2-01-SMLP4-4
SMLP5-5
CAL2-00-SMLP5-5
CAL2-01-SMLP5-5
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
123
© 2011, AFL, all rights reserved. CALP-00-2000 Revision 1B, 2012-01-20
Specifications are subject to change without notice.
Prepaid Calibration Plans
Ordering Information
Product
Model
2 YR Cal Plan
AFL NO.
AFL NO.
SVA1 Optical Attenuator
SVA1
CAL2-00-SVA1
CAL2-01-SVA1
TACT Network Activation Kits
VOA Optical Attenuators
2 YR Cal Plus Plan
TACT1-4-6D
CAL2-00-TACT1-4-6D
CAL2-01-TACT1-4-6D
TACT1-4-FH
CAL2-00-TACT1-4-FH
CAL2-01-TACT1-4-FH
VOA5-MM
CAL2-00-VOA5-MM
CAL2-01-VOA5-MM
VOA6-SM
CAL2-00-VOA6-SM
CAL2-01-VOA6-SM
Calibration and Repair Facilities
AFL has an authorized calibration/repair facility for NOYES Test and Inspection products in the USA and in Europe.
USA Calibration and Repair Services:
NOYES Test and Inspection Division
16 Eastgate Park Road
Belmont, NH 03220
603-528-7780
800-321-5198
Europe Calibration and Repair Services:
Fujikura Europe Ltd.
C51 Barwell Business Park
Leatherhead Road
Chessington, Surrey, KT9 2NY
+44 (0) 208 240 2020
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
www.AFLglobal.com or (800) 321-5298, (603) 528-7780
124
© 2011, AFL, all rights reserved. CALP-00-2000 Revision 1B, 2012-01-20
Specifications are subject to change without notice.
Please contact your AFL Sales Representative for
information about our other products or services.
CLEANING SUPPLIES
FCC2 - Fiber
Connector Cleaner
CLETOP-S
FiberWipes™
FUSION SPLICING SYSTEMS
FSM-11R – SpliceMate™
FSM-100P
Along with a broad range of products, we also offer professional
training through The Light Brigade®. Over 40,000 people have
completed a Light Brigade training course making us the
leading fiber optic training provider in the world.
NOYES International Sales and Service Contact Information
Available at www.AFLglobal.com/NOYES/Contacts
FSM-60S
www.AFLglobal.com
CAT-01008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement